tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.01 seconds) Test will time out and terminate in 3600.0 seconds run the VM test script start all VMs machine: starting vm sshClient: starting vm machine # Disk image does not exist, creating the virtualisation disk image... machine: QEMU running (pid 47) machine # Formatting '/build/vm-state-machine/tmp.GaHXGpcJWO', fmt=raw size=1073741824 machine # mke2fs 1.47.4 (6-Mar-2025) machine # Discarding device blocks: 0/262144 done machine # Creating filesystem with 262144 4k blocks and 65536 inodes machine # Filesystem UUID: a462209d-1575-4a2d-95e8-c78a99b96ed8 machine # Superblock backups stored on blocks: machine # 32768, 98304, 163840, 229376 machine # machine # Allocating group tables: 0/8 done machine # Writing inode tables: 0/8 done machine # Creating journal (8192 blocks): done machine # Writing superblocks and filesystem accounting information: 0/8 done machine # machine # Virtualisation disk image created. sshClient: QEMU running (pid 48) sshClient # Disk image does not exist, creating the virtualisation disk image... sshClient # Formatting '/build/vm-state-sshClient/tmp.aMiPoQsS9J', fmt=raw size=1073741824 sshClient # mke2fs 1.47.4 (6-Mar-2025) sshClient # Discarding device blocks: 0/262144 done (finished: start all VMs, in 0.32 seconds) sshClient # Creating filesystem with 262144 4k blocks and 65536 inodes subtest: create systemd-homed user on first boot prompt sshClient # Filesystem UUID: c2084ef1-ebc8-4212-864b-d1adbff32cdc machine: waiting for unit systemd-homed.service sshClient # Superblock backups stored on blocks: machine: waiting for the VM to finish booting sshClient # 32768, 98304, 163840, 229376 sshClient # sshClient # Allocating group tables: 0/8 done sshClient # Writing inode tables: 0/8 done sshClient # Creating journal (8192 blocks): done sshClient # Writing superblocks and filesystem accounting information: 0/8 done sshClient # sshClient # Virtualisation disk image created. machine # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) sshClient # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) machine # machine # machine # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 machine # Press Ctrl-B to configure iPXE (PCI 00:02.0)... machine # machine # machine # machine # machine # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 machine # Press Ctrl-B to configure iPXE (PCI 00:08.0)... machine # machine # sshClient # sshClient # machine # Booting from ROM... sshClient # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 sshClient # Press Ctrl-B to configure iPXE (PCI 00:02.0)... sshClient # sshClient # sshClient # sshClient # sshClient # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 sshClient # Press Ctrl-B to configure iPXE (PCI 00:08.0)... sshClient # sshClient # sshClient # Booting from ROM... machine # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.50 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 7 15:23:00 UTC 2026 machine # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/0nbzfpaz7w2imqsmkiripzvb3dcnhb1q-nixos-system-machine-test/init regInfo=/nix/store/0h8kmdlbvs2ia2lxl23pll451iag8qyv-closure-info/registration console=ttyS0,115200n8 console=tty0 machine # [ 0.000000] BIOS-provided physical RAM map: machine # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable machine # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable machine # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved machine # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved machine # [ 0.000000] NX (Execute Disable) protection: active machine # [ 0.000000] APIC: Static calls initialized machine # [ 0.000000] SMBIOS 2.8 present. machine # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 machine # [ 0.000000] DMI: Memory slots populated: 1/1 machine # [ 0.000000] Hypervisor detected: KVM machine # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 machine # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 machine # [ 0.000001] kvm-clock: using sched offset of 438204510 cycles machine # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns machine # [ 0.000005] tsc: Detected 2400.012 MHz processor machine # [ 0.000811] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 machine # [ 0.000838] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs machine # [ 0.000840] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT machine # [ 0.002757] found SMP MP-table at [mem 0x000f5450-0x000f545f] machine # [ 0.002767] Using GB pages for direct mapping machine # [ 0.002881] RAMDISK: [mem 0x3e41f000-0x3ffcffff] machine # [ 0.002890] ACPI: Early table checksum verification disabled machine # [ 0.002892] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) machine # [ 0.002897] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002901] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002907] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002909] ACPI: FACS 0x000000003FFE0000 000040 machine # [ 0.002911] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002912] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002914] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002915] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.002917] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] machine # [ 0.002918] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] machine # [ 0.002918] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] machine # [ 0.002919] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] machine # [ 0.002919] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] machine # [ 0.002920] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] machine # [ 0.002920] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] machine # [ 0.003154] No NUMA configuration found machine # [ 0.003155] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] machine # [ 0.003157] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] machine # [ 0.005331] Zone ranges: machine # [ 0.005332] DMA [mem 0x0000000000001000-0x0000000000ffffff] machine # [ 0.005334] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] machine # [ 0.005335] Normal empty machine # [ 0.005336] Device empty machine # [ 0.005337] Movable zone start for each node machine # [ 0.005338] Early memory node ranges machine # [ 0.005338] node 0: [mem 0x0000000000001000-0x000000000009efff] machine # [ 0.005339] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] machine # [ 0.005340] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] machine # [ 0.005359] On node 0, zone DMA: 1 pages in unavailable ranges machine # [ 0.005598] On node 0, zone DMA: 97 pages in unavailable ranges machine # [ 0.021841] On node 0, zone DMA32: 40 pages in unavailable ranges machine # [ 0.022320] ACPI: PM-Timer IO Port: 0x608 machine # [ 0.022333] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) machine # [ 0.022365] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 machine # [ 0.022368] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) machine # [ 0.022370] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) machine # [ 0.022372] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) machine # [ 0.022373] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) machine # [ 0.022373] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) machine # [ 0.022376] ACPI: Using ACPI (MADT) for SMP configuration information machine # [ 0.022378] ACPI: HPET id: 0x8086a201 base: 0xfed00000 machine # [ 0.022382] TSC deadline timer available machine # [ 0.022386] CPU topo: Max. logical packages: 1 machine # [ 0.022387] CPU topo: Max. logical dies: 1 machine # [ 0.022388] CPU topo: Max. dies per package: 1 machine # [ 0.022392] CPU topo: Max. threads per core: 1 machine # [ 0.022393] CPU topo: Num. cores per package: 1 machine # [ 0.022393] CPU topo: Num. threads per package: 1 machine # [ 0.022393] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs machine # [ 0.022411] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() machine # [ 0.022449] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] machine # [ 0.022451] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] machine # [ 0.022452] [mem 0x40000000-0xafffffff] available for PCI devices machine # [ 0.022454] Booting paravirtualized kernel on KVM machine # [ 0.022456] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns machine # [ 0.026909] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 machine # [ 0.028902] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 machine # [ 0.028951] kvm-guest: PV spinlocks disabled, single CPU machine # [ 0.028952] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/0nbzfpaz7w2imqsmkiripzvb3dcnhb1q-nixos-system-machine-test/init regInfo=/nix/store/0h8kmdlbvs2ia2lxl23pll451iag8qyv-closure-info/registration console=ttyS0,115200n8 console=tty0 machine # [ 0.029042] Unknown kernel command line parameters "regInfo=/nix/store/0h8kmdlbvs2ia2lxl23pll451iag8qyv-closure-info/registration", will be passed to user space. machine # [ 0.029054] random: crng init done machine # [ 0.029054] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes machine # [ 0.029075] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) machine # [ 0.029087] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) machine # [ 0.029116] Fallback order for Node 0: 0 machine # [ 0.029119] Built 1 zonelists, mobility grouping on. Total pages: 262006 machine # [ 0.029120] Policy zone: DMA32 machine # [ 0.031368] mem auto-init: stack:all(zero), heap alloc:on, heap free:off sshClient # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.50 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 7 15:23:00 UTC 2026 machine # [ 0.033580] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 machine # [ 0.035867] allocated 2097152 bytes of page_ext machine # [ 0.045260] ftrace: allocating 48731 entries in 192 pages machine # [ 0.045262] ftrace: allocated 192 pages with 2 groups machine # [ 0.046065] Dynamic Preempt: lazy machine # [ 0.046214] rcu: Preemptible hierarchical RCU implementation. sshClient # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/g5ipi34i83wr7vvwhd5xxlx7i471v7wy-nixos-system-sshClient-test/init regInfo=/nix/store/4p2iy6bf2dy52jcq9vxv266462xf7ia9-closure-info/registration console=ttyS0,115200n8 console=tty0 machine # [ 0.046215] rcu: RCU event tracing is enabled. sshClient # [ 0.000000] BIOS-provided physical RAM map: machine # [ 0.046215] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. sshClient # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable machine # [ 0.046217] Trampoline variant of Tasks RCU enabled. sshClient # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved machine # [ 0.046217] Rude variant of Tasks RCU enabled. machine # [ 0.046217] Tracing variant of Tasks RCU enabled. sshClient # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved machine # [ 0.046218] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. sshClient # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable machine # [ 0.046219] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 sshClient # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved sshClient # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved machine # [ 0.046232] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. sshClient # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved machine # [ 0.046234] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. sshClient # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved machine # [ 0.046234] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. sshClient # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved machine # [ 0.050521] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 sshClient # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved machine # [ 0.050779] rcu: srcu_init: Setting srcu_struct sizes based on contention. sshClient # [ 0.000000] NX (Execute Disable) protection: active sshClient # [ 0.000000] APIC: Static calls initialized sshClient # [ 0.000000] SMBIOS 2.8 present. machine # [ 0.050787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns machine # [ 0.050888] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) sshClient # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 machine # [ 0.054365] Console: colour VGA+ 80x25 sshClient # [ 0.000000] DMI: Memory slots populated: 1/1 sshClient # [ 0.000000] Hypervisor detected: KVM machine # [ 0.054368] printk: legacy console [tty0] enabled machine # [ 0.083326] printk: legacy console [ttyS0] enabled sshClient # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 sshClient # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 machine # [ 0.188637] ACPI: Core revision 20250807 sshClient # [ 0.000000] kvm-clock: using sched offset of 497537151 cycles machine # [ 0.189524] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns sshClient # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns sshClient # [ 0.000004] tsc: Detected 2400.012 MHz processor machine # [ 0.191070] APIC: Switch to symmetric I/O mode setup sshClient # [ 0.000811] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 machine # [ 0.192031] x2apic enabled sshClient # [ 0.000838] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs machine # [ 0.192815] APIC: Switched APIC routing to: physical x2apic sshClient # [ 0.000840] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT sshClient # [ 0.002749] found SMP MP-table at [mem 0x000f5450-0x000f545f] machine # [ 0.194632] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 sshClient # [ 0.002759] Using GB pages for direct mapping sshClient # [ 0.002819] RAMDISK: [mem 0x3e41c000-0x3ffcffff] sshClient # [ 0.002826] ACPI: Early table checksum verification disabled machine # [ 0.195633] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns sshClient # [ 0.002828] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) sshClient # [ 0.002832] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.197357] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) sshClient # [ 0.002837] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.198465] x86/cpu: User Mode Instruction Prevention (UMIP) activated sshClient # [ 0.002843] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.199490] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 sshClient # [ 0.002845] ACPI: FACS 0x000000003FFE0000 000040 machine # [ 0.201035] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 sshClient # [ 0.002847] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) sshClient # [ 0.002848] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.202107] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto sshClient # [ 0.002850] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.203355] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl sshClient # [ 0.002851] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) machine # [ 0.204355] Transient Scheduler Attacks: Vulnerable: No microcode sshClient # [ 0.002853] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] machine # [ 0.206072] Spectre V2 : Mitigation: Enhanced / Automatic IBRS sshClient # [ 0.002854] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] machine # [ 0.207035] Speculative Return Stack Overflow: Mitigation: Safe RET sshClient # [ 0.002854] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] sshClient # [ 0.002855] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] sshClient # [ 0.002855] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] sshClient # [ 0.002856] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] sshClient # [ 0.002856] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] machine # [ 0.207355] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization sshClient # [ 0.003089] No NUMA configuration found machine # [ 0.209363] Spectre V2 : Enabling IBPB for BPF sshClient # [ 0.003090] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] sshClient # [ 0.003092] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] sshClient # [ 0.005254] Zone ranges: machine # [ 0.210356] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier sshClient # [ 0.005255] DMA [mem 0x0000000000001000-0x0000000000ffffff] machine # [ 0.211356] active return thunk: srso_alias_return_thunk sshClient # [ 0.005257] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] sshClient # [ 0.005258] Normal empty sshClient # [ 0.005258] Device empty machine # [ 0.212994] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' sshClient # [ 0.005259] Movable zone start for each node sshClient # [ 0.005259] Early memory node ranges machine # [ 0.214355] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' sshClient # [ 0.005260] node 0: [mem 0x0000000000001000-0x000000000009efff] machine # [ 0.215355] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' sshClient # [ 0.005261] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] machine # [ 0.216355] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' sshClient # [ 0.005262] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] sshClient # [ 0.005279] On node 0, zone DMA: 1 pages in unavailable ranges machine # [ 0.217355] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' sshClient # [ 0.005519] On node 0, zone DMA: 97 pages in unavailable ranges machine # [ 0.218355] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' sshClient # [ 0.021866] On node 0, zone DMA32: 40 pages in unavailable ranges sshClient # [ 0.022317] ACPI: PM-Timer IO Port: 0x608 machine # [ 0.219355] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' sshClient # [ 0.022327] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) machine # [ 0.220355] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 sshClient # [ 0.022351] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 sshClient # [ 0.022354] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) machine # [ 0.221356] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 sshClient # [ 0.022355] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) machine # [ 0.222355] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 sshClient # [ 0.022356] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) machine # [ 0.223355] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 sshClient # [ 0.022357] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) machine # [ 0.224355] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 sshClient # [ 0.022358] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) sshClient # [ 0.022361] ACPI: Using ACPI (MADT) for SMP configuration information machine # [ 0.225355] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. sshClient # [ 0.022361] ACPI: HPET id: 0x8086a201 base: 0xfed00000 sshClient # [ 0.022365] TSC deadline timer available sshClient # [ 0.022369] CPU topo: Max. logical packages: 1 sshClient # [ 0.022369] CPU topo: Max. logical dies: 1 sshClient # [ 0.022370] CPU topo: Max. dies per package: 1 sshClient # [ 0.022374] CPU topo: Max. threads per core: 1 sshClient # [ 0.022374] CPU topo: Num. cores per package: 1 sshClient # [ 0.022374] CPU topo: Num. threads per package: 1 sshClient # [ 0.022375] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs sshClient # [ 0.022390] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() sshClient # [ 0.022417] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] sshClient # [ 0.022419] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] sshClient # [ 0.022420] [mem 0x40000000-0xafffffff] available for PCI devices sshClient # [ 0.022421] Booting paravirtualized kernel on KVM sshClient # [ 0.022424] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns sshClient # [ 0.026844] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 sshClient # [ 0.028982] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 sshClient # [ 0.029021] kvm-guest: PV spinlocks disabled, single CPU sshClient # [ 0.029022] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/g5ipi34i83wr7vvwhd5xxlx7i471v7wy-nixos-system-sshClient-test/init regInfo=/nix/store/4p2iy6bf2dy52jcq9vxv266462xf7ia9-closure-info/registration console=ttyS0,115200n8 console=tty0 sshClient # [ 0.029118] Unknown kernel command line parameters "regInfo=/nix/store/4p2iy6bf2dy52jcq9vxv266462xf7ia9-closure-info/registration", will be passed to user space. sshClient # [ 0.029130] random: crng init done sshClient # [ 0.029131] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes sshClient # [ 0.029151] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) sshClient # [ 0.029163] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) sshClient # [ 0.029191] Fallback order for Node 0: 0 sshClient # [ 0.029194] Built 1 zonelists, mobility grouping on. Total pages: 262006 sshClient # [ 0.029195] Policy zone: DMA32 sshClient # [ 0.031482] mem auto-init: stack:all(zero), heap alloc:on, heap free:off sshClient # [ 0.033743] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 sshClient # [ 0.035804] allocated 2097152 bytes of page_ext sshClient # [ 0.045451] ftrace: allocating 48731 entries in 192 pages sshClient # [ 0.045453] ftrace: allocated 192 pages with 2 groups sshClient # [ 0.046265] Dynamic Preempt: lazy sshClient # [ 0.046378] rcu: Preemptible hierarchical RCU implementation. sshClient # [ 0.046379] rcu: RCU event tracing is enabled. sshClient # [ 0.046380] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. sshClient # [ 0.046381] Trampoline variant of Tasks RCU enabled. sshClient # [ 0.046381] Rude variant of Tasks RCU enabled. sshClient # [ 0.046381] Tracing variant of Tasks RCU enabled. sshClient # [ 0.046382] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. sshClient # [ 0.046383] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 machine # [ 0.260676] Freeing SMP alternatives memory: 44K machine # [ 0.261358] pid_max: default: 32768 minimum: 301 sshClient # [ 0.046435] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. machine # [ 0.262180] LSM: initializing lsm=capability,landlock,yama,bpf,ima sshClient # [ 0.046437] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. machine # [ 0.263443] landlock: Up and running. sshClient # [ 0.046438] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. machine # [ 0.264046] Yama: becoming mindful. sshClient # [ 0.050747] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 machine # [ 0.264569] LSM support for eBPF active sshClient # [ 0.051008] rcu: srcu_init: Setting srcu_struct sizes based on contention. machine # [ 0.265440] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) sshClient # [ 0.051014] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns machine # [ 0.266374] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) sshClient # [ 0.051121] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) sshClient # [ 0.054584] Console: colour VGA+ 80x25 sshClient # [ 0.054587] printk: legacy console [tty0] enabled sshClient # [ 0.083554] printk: legacy console [ttyS0] enabled machine # [ 0.269020] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) sshClient # [ 0.186115] ACPI: Core revision 20250807 machine # [ 0.269828] Performance Events: Fam17h+ core perfctr, AMD PMU driver. sshClient # [ 0.186993] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns machine # [ 0.270360] ... version: 2 machine # [ 0.271076] ... bit width: 48 sshClient # [ 0.188618] APIC: Switch to symmetric I/O mode setup machine # [ 0.271357] ... generic counters: 6 sshClient # [ 0.189555] x2apic enabled machine # [ 0.272062] ... generic bitmap: 000000000000003f sshClient # [ 0.190298] APIC: Switched APIC routing to: physical x2apic machine # [ 0.272408] ... fixed-purpose counters: 0 machine # [ 0.273163] ... fixed-purpose bitmap: 0000000000000000 sshClient # [ 0.192096] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 machine # [ 0.274069] ... value mask: 0000ffffffffffff machine # [ 0.274357] ... max period: 00007fffffffffff sshClient # [ 0.193055] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns machine # [ 0.275242] ... global_ctrl mask: 000000000000003f sshClient # [ 0.194680] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) machine # [ 0.276210] signal: max sigframe size: 3376 machine # [ 0.276973] rcu: Hierarchical SRCU implementation. sshClient # [ 0.195761] x86/cpu: User Mode Instruction Prevention (UMIP) activated machine # [ 0.277362] rcu: Max phase no-delay instances is 400. sshClient # [ 0.196836] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 sshClient # [ 0.197678] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 sshClient # [ 0.198681] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto sshClient # [ 0.200678] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl machine # [ 0.282671] smp: Bringing up secondary CPUs ... sshClient # [ 0.201678] Transient Scheduler Attacks: Vulnerable: No microcode machine # [ 0.283371] smp: Brought up 1 node, 1 CPU sshClient # [ 0.203400] Spectre V2 : Mitigation: Enhanced / Automatic IBRS machine # [ 0.284032] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) sshClient # [ 0.204392] Speculative Return Stack Overflow: Mitigation: Safe RET machine # [ 0.284610] Memory: 941768K/1048024K available (17223K kernel code, 2726K rwdata, 13584K rodata, 3644K init, 2988K bss, 98880K reserved, 0K cma-reserved) machine # [ 0.285595] devtmpfs: initialized machine # [ 0.286392] x86/mm: Memory block size: 128MB sshClient # [ 0.204678] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization sshClient # [ 0.206685] Spectre V2 : Enabling IBPB for BPF machine # [ 0.288030] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) sshClient # [ 0.207679] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier sshClient # [ 0.208678] active return thunk: srso_alias_return_thunk machine # [ 0.288389] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). sshClient # [ 0.209698] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' machine # [ 0.289442] pinctrl core: initialized pinctrl subsystem sshClient # [ 0.210679] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' machine # [ 0.290568] PM: RTC time: 02:52:25, date: 2026-09-12 sshClient # [ 0.212448] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' sshClient # [ 0.213457] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' sshClient # [ 0.214491] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' machine # [ 0.293896] NET: Registered PF_NETLINK/PF_ROUTE protocol family sshClient # [ 0.215489] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' sshClient # [ 0.216449] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' machine # [ 0.294707] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations sshClient # [ 0.217678] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 machine # [ 0.295380] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations sshClient # [ 0.218678] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 machine # [ 0.296501] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations sshClient # [ 0.219678] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 machine # [ 0.297368] audit: initializing netlink subsys (disabled) sshClient # [ 0.220678] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 sshClient # [ 0.221632] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 machine # [ 0.298359] audit: type=2000 audit(1789181546.418:1): state=initialized audit_enabled=0 res=1 machine # [ 0.299524] thermal_sys: Registered thermal governor 'fair_share' sshClient # [ 0.222408] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. machine # [ 0.299526] thermal_sys: Registered thermal governor 'bang_bang' machine # [ 0.300358] thermal_sys: Registered thermal governor 'step_wise' machine # [ 0.301359] thermal_sys: Registered thermal governor 'user_space' machine # [ 0.302357] thermal_sys: Registered thermal governor 'power_allocator' machine # [ 0.303372] cpuidle: using governor menu machine # [ 0.305648] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 machine # [ 0.306569] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] machine # [ 0.307362] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry machine # [ 0.308370] PCI: Using configuration type 1 for base access machine # [ 0.309532] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. machine # [ 0.316392] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages machine # [ 0.317359] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page machine # [ 0.322359] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages machine # [ 0.323358] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page sshClient # [ 0.256253] Freeing SMP alternatives memory: 44K sshClient # [ 0.256681] pid_max: default: 32768 minimum: 301 sshClient # [ 0.257761] LSM: initializing lsm=capability,landlock,yama,bpf,ima sshClient # [ 0.258783] landlock: Up and running. sshClient # [ 0.259679] Yama: becoming mindful. sshClient # [ 0.260488] LSM support for eBPF active machine # [ 0.334610] ACPI: Added _OSI(Module Device) machine # [ 0.335349] ACPI: Added _OSI(Processor Device) sshClient # [ 0.261227] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) machine # [ 0.335910] ACPI: Added _OSI(Processor Aggregator Device) sshClient # [ 0.261698] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) sshClient # [ 0.264746] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) sshClient # [ 0.266210] Performance Events: Fam17h+ core perfctr, AMD PMU driver. machine # [ 0.340208] ACPI: 1 ACPI AML tables successfully acquired and loaded sshClient # [ 0.266686] ... version: 2 sshClient # [ 0.267389] ... bit width: 48 sshClient # [ 0.267680] ... generic counters: 6 sshClient # [ 0.268425] ... generic bitmap: 000000000000003f sshClient # [ 0.268680] ... fixed-purpose counters: 0 sshClient # [ 0.269412] ... fixed-purpose bitmap: 0000000000000000 sshClient # [ 0.269680] ... value mask: 0000ffffffffffff machine # [ 0.346367] ACPI: Interpreter enabled sshClient # [ 0.270568] ... max period: 00007fffffffffff machine # [ 0.346980] ACPI: PM: (supports S0 S3 S4 S5) sshClient # [ 0.271366] ... global_ctrl mask: 000000000000003f machine # [ 0.347359] ACPI: Using IOAPIC for interrupt routing sshClient # [ 0.271778] signal: max sigframe size: 3376 sshClient # [ 0.272616] rcu: Hierarchical SRCU implementation. machine # [ 0.348227] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug sshClient # [ 0.273274] rcu: Max phase no-delay instances is 400. machine # [ 0.353358] PCI: Using E820 reservations for host bridge windows machine # [ 0.354512] ACPI: Enabled 2 GPEs in block 00 to 3F sshClient # [ 0.278269] smp: Bringing up secondary CPUs ... sshClient # [ 0.278694] smp: Brought up 1 node, 1 CPU sshClient # [ 0.279396] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) sshClient # [ 0.279841] Memory: 941764K/1048024K available (17223K kernel code, 2726K rwdata, 13584K rodata, 3644K init, 2988K bss, 98892K reserved, 0K cma-reserved) sshClient # [ 0.280877] devtmpfs: initialized sshClient # [ 0.281686] x86/mm: Memory block size: 128MB machine # [ 0.362427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) sshClient # [ 0.283409] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) machine # [ 0.363374] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] sshClient # [ 0.284599] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). sshClient # [ 0.285764] pinctrl core: initialized pinctrl subsystem machine # [ 0.364457] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] sshClient # [ 0.286884] PM: RTC time: 02:52:25, date: 2026-09-12 machine # [ 0.365485] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] machine # [ 0.366733] PCI host bridge to bus 0000:00 machine # [ 0.367362] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] machine # [ 0.368358] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] sshClient # [ 0.290286] NET: Registered PF_NETLINK/PF_ROUTE protocol family machine # [ 0.369358] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] sshClient # [ 0.291014] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations machine # [ 0.370357] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] sshClient # [ 0.291697] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations machine # [ 0.371358] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] sshClient # [ 0.292814] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations machine # [ 0.372358] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] sshClient # [ 0.293689] audit: initializing netlink subsys (disabled) machine # [ 0.373358] pci_bus 0000:00: root bus resource [bus 00-ff] sshClient # [ 0.294838] thermal_sys: Registered thermal governor 'fair_share' sshClient # [ 0.294840] thermal_sys: Registered thermal governor 'bang_bang' machine # [ 0.374368] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint sshClient # [ 0.295681] thermal_sys: Registered thermal governor 'step_wise' machine # [ 0.375814] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint sshClient # [ 0.296599] thermal_sys: Registered thermal governor 'user_space' sshClient # [ 0.297447] audit: type=2000 audit(1789181546.503:1): state=initialized audit_enabled=0 res=1 sshClient # [ 0.299684] thermal_sys: Registered thermal governor 'power_allocator' sshClient # [ 0.299698] cpuidle: using governor menu sshClient # [ 0.301932] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 machine # [ 0.378440] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] sshClient # [ 0.302938] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] machine # [ 0.379414] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] sshClient # [ 0.303683] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry machine # [ 0.380381] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] sshClient # [ 0.304691] PCI: Using configuration type 1 for base access machine # [ 0.381660] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] sshClient # [ 0.305830] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. machine # [ 0.383156] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint machine # [ 0.385389] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f] sshClient # [ 0.310960] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages machine # [ 0.386255] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] sshClient # [ 0.311681] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page machine # [ 0.387124] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] machine # [ 0.387363] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] machine # [ 0.388954] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint sshClient # [ 0.316681] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages sshClient # [ 0.317681] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page machine # [ 0.391391] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f] machine # [ 0.392298] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] machine # [ 0.393210] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] machine # [ 0.394900] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint machine # [ 0.397171] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf] machine # [ 0.398066] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] sshClient # [ 0.328006] ACPI: Added _OSI(Module Device) machine # [ 0.398379] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] sshClient # [ 0.328682] ACPI: Added _OSI(Processor Device) sshClient # [ 0.329422] ACPI: Added _OSI(Processor Aggregator Device) machine # [ 0.399954] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint machine # [ 0.401391] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f] machine # [ 0.402261] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] machine # [ 0.403179] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] machine # [ 0.404912] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint sshClient # [ 0.338210] ACPI: 1 ACPI AML tables successfully acquired and loaded machine # [ 0.407392] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf] machine # [ 0.408364] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] machine # [ 0.409379] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] sshClient # [ 0.341928] ACPI: Interpreter enabled sshClient # [ 0.342584] ACPI: PM: (supports S0 S3 S4 S5) machine # [ 0.410925] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint sshClient # [ 0.343187] ACPI: Using IOAPIC for interrupt routing sshClient # [ 0.343740] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug machine # [ 0.412382] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f] sshClient # [ 0.344681] PCI: Using E820 reservations for host bridge windows machine # [ 0.413267] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] machine # [ 0.414159] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] sshClient # [ 0.347772] ACPI: Enabled 2 GPEs in block 00 to 3F machine # [ 0.415933] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint machine # [ 0.417390] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df] machine # [ 0.418327] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] machine # [ 0.419134] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] machine # [ 0.420256] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref] sshClient # [ 0.356326] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) machine # [ 0.421715] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint sshClient # [ 0.356686] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] machine # [ 0.423798] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] sshClient # [ 0.358307] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] machine # [ 0.424380] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] sshClient # [ 0.358801] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] machine # [ 0.425900] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint sshClient # [ 0.360188] PCI host bridge to bus 0000:00 sshClient # [ 0.360685] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] machine # [ 0.427374] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff] sshClient # [ 0.361681] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] machine # [ 0.428221] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] sshClient # [ 0.362680] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] machine # [ 0.429108] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] sshClient # [ 0.363680] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] sshClient # [ 0.364680] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] machine # [ 0.429887] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint sshClient # [ 0.365680] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] sshClient # [ 0.366687] pci_bus 0000:00: root bus resource [bus 00-ff] machine # [ 0.431364] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff] sshClient # [ 0.367773] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint machine # [ 0.432295] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] machine # [ 0.433061] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] sshClient # [ 0.369145] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint machine # [ 0.433938] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint machine # [ 0.435001] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f] machine # [ 0.435564] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint sshClient # [ 0.371716] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] machine # [ 0.437384] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f] sshClient # [ 0.372692] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] sshClient # [ 0.373648] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] sshClient # [ 0.374640] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] sshClient # [ 0.376356] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint sshClient # [ 0.378716] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f] sshClient # [ 0.379547] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] sshClient # [ 0.380526] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] sshClient # [ 0.381597] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] machine # [ 0.438609] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint sshClient # [ 0.383046] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint machine # [ 0.441022] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f] machine # [ 0.441596] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint sshClient # [ 0.385715] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f] machine # [ 0.442923] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] sshClient # [ 0.386602] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] machine # [ 0.443588] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint sshClient # [ 0.387455] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] machine # [ 0.444922] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO sshClient # [ 0.389141] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint machine # [ 0.445596] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint sshClient # [ 0.391527] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf] machine # [ 0.447334] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f] sshClient # [ 0.392328] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] machine # [ 0.447979] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] sshClient # [ 0.392701] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] machine # [ 0.448676] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint sshClient # [ 0.394206] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint machine # [ 0.449940] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] sshClient # [ 0.395688] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f] sshClient # [ 0.396552] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] machine # [ 0.453547] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 sshClient # [ 0.397498] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] machine # [ 0.454464] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 sshClient # [ 0.399047] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint machine # [ 0.455459] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 machine # [ 0.456454] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 machine # [ 0.457454] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 machine # [ 0.458457] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 sshClient # [ 0.401376] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf] machine # [ 0.459457] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 sshClient # [ 0.401687] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] machine # [ 0.460456] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 sshClient # [ 0.402640] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] machine # [ 0.461395] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 sshClient # [ 0.404047] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint machine # [ 0.462379] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 machine # [ 0.463340] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 machine # [ 0.464152] ACPI: PCI: Interrupt link GSID configured for IRQ 19 sshClient # [ 0.405688] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f] machine # [ 0.465128] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 sshClient # [ 0.406516] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] machine # [ 0.465370] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 sshClient # [ 0.407423] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] machine # [ 0.466327] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 machine # [ 0.467145] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 sshClient # [ 0.408301] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint machine # [ 0.469196] iommu: Default domain type: Translated machine # [ 0.469992] iommu: DMA domain TLB invalidation policy: lazy mode sshClient # [ 0.410688] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df] machine # [ 0.470610] ACPI: bus type USB registered sshClient # [ 0.411543] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] machine # [ 0.471373] usbcore: registered new interface driver usbfs sshClient # [ 0.412415] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] machine # [ 0.472258] usbcore: registered new interface driver hub sshClient # [ 0.412693] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref] machine # [ 0.473090] usbcore: registered new device driver usb machine # [ 0.474295] NetLabel: Initializing sshClient # [ 0.414200] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint machine # [ 0.474766] NetLabel: domain hash size = 128 machine # [ 0.475357] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO machine # [ 0.476367] NetLabel: unlabeled traffic allowed by default sshClient # [ 0.415693] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] machine # [ 0.477306] PCI: Using ACPI for IRQ routing sshClient # [ 0.416707] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] sshClient # [ 0.418214] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint sshClient # [ 0.419699] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff] sshClient # [ 0.420606] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] sshClient # [ 0.421481] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] sshClient # [ 0.423116] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint sshClient # [ 0.425393] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff] sshClient # [ 0.425687] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] sshClient # [ 0.426658] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] sshClient # [ 0.428103] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint sshClient # [ 0.429338] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f] sshClient # [ 0.429876] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint sshClient # [ 0.431365] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f] sshClient # [ 0.431878] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint sshClient # [ 0.434664] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f] sshClient # [ 0.435555] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint sshClient # [ 0.437584] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] sshClient # [ 0.438735] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint sshClient # [ 0.439965] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO machine # [ 0.520062] pci 0000:00:01.0: vgaarb: setting as boot VGA device sshClient # [ 0.440924] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint machine # [ 0.520353] pci 0000:00:01.0: vgaarb: bridge control possible machine # [ 0.520353] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none machine # [ 0.520363] vgaarb: loaded sshClient # [ 0.443623] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f] sshClient # [ 0.444325] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] machine # [ 0.521040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 machine # [ 0.521357] hpet0: 3 comparators, 64-bit 100.000000 MHz counter sshClient # [ 0.445002] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint sshClient # [ 0.446560] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] machine # [ 0.525449] clocksource: Switched to clocksource kvm-clock sshClient # [ 0.450188] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 sshClient # [ 0.450787] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 machine # [ 0.528967] VFS: Disk quotas dquot_6.6.0 sshClient # [ 0.451783] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 machine # [ 0.529697] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) sshClient # [ 0.452776] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 machine # [ 0.531035] pnp: PnP ACPI init sshClient # [ 0.453776] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 machine # [ 0.531805] ACPI: IRQ 4 override to edge(!), high(!) sshClient # [ 0.454776] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 machine # [ 0.532791] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved sshClient # [ 0.455780] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 machine # [ 0.534329] pnp: PnP ACPI: found 6 devices sshClient # [ 0.456780] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 sshClient # [ 0.457714] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 sshClient # [ 0.458692] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 sshClient # [ 0.459686] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 sshClient # [ 0.460648] ACPI: PCI: Interrupt link GSID configured for IRQ 19 sshClient # [ 0.461535] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 sshClient # [ 0.462408] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 sshClient # [ 0.462694] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 machine # [ 0.541869] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns sshClient # [ 0.463680] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 machine # [ 0.543416] clocksource: Switched to clocksource acpi_pm machine # [ 0.544373] NET: Registered PF_INET protocol family sshClient # [ 0.465657] iommu: Default domain type: Translated sshClient # [ 0.466284] iommu: DMA domain TLB invalidation policy: lazy mode machine # [ 0.545358] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) sshClient # [ 0.466940] ACPI: bus type USB registered sshClient # [ 0.467750] usbcore: registered new interface driver usbfs sshClient # [ 0.468698] usbcore: registered new interface driver hub sshClient # [ 0.469597] usbcore: registered new device driver usb sshClient # [ 0.471277] NetLabel: Initializing sshClient # [ 0.471682] NetLabel: domain hash size = 128 sshClient # [ 0.472443] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO sshClient # [ 0.472712] NetLabel: unlabeled traffic allowed by default sshClient # [ 0.473641] PCI: Using ACPI for IRQ routing machine # [ 0.561785] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) machine # [ 0.563280] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) machine # [ 0.564644] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) machine # [ 0.565954] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) machine # [ 0.567206] TCP: Hash tables configured (established 8192 bind 8192) machine # [ 0.568344] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) machine # [ 0.569660] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) machine # [ 0.570839] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) machine # [ 0.572078] NET: Registered PF_UNIX/PF_LOCAL protocol family machine # [ 0.573110] NET: Registered PF_XDP protocol family machine # [ 0.573990] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] machine # [ 0.575042] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] machine # [ 0.576085] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] machine # [ 0.577230] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] machine # [ 0.578379] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] machine # [ 0.579508] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] machine # [ 0.581317] ACPI: \_SB_.GSIA: Enabled at IRQ 16 machine # [ 0.583439] ACPI: \_SB_.GSIB: Enabled at IRQ 17 machine # [ 0.585404] ACPI: \_SB_.GSIC: Enabled at IRQ 18 machine # [ 0.587412] ACPI: \_SB_.GSID: Enabled at IRQ 19 machine # [ 0.589100] PCI: CLS 0 bytes, default 64 machine # [ 0.590025] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns machine # [ 0.591805] Trying to unpack rootfs image as initramfs... sshClient # [ 0.516371] pci 0000:00:01.0: vgaarb: setting as boot VGA device sshClient # [ 0.516677] pci 0000:00:01.0: vgaarb: bridge control possible sshClient # [ 0.516677] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none sshClient # [ 0.516685] vgaarb: loaded sshClient # [ 0.517376] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 sshClient # [ 0.517682] hpet0: 3 comparators, 64-bit 100.000000 MHz counter sshClient # [ 0.522765] clocksource: Switched to clocksource kvm-clock sshClient # [ 0.524425] VFS: Disk quotas dquot_6.6.0 sshClient # [ 0.526888] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) sshClient # [ 0.528273] pnp: PnP ACPI init sshClient # [ 0.529116] ACPI: IRQ 4 override to edge(!), high(!) sshClient # [ 0.530108] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved sshClient # [ 0.531740] pnp: PnP ACPI: found 6 devices sshClient # [ 0.539313] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns sshClient # [ 0.540791] clocksource: Switched to clocksource acpi_pm sshClient # [ 0.541791] NET: Registered PF_INET protocol family sshClient # [ 0.542857] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) machine # [ 0.637991] Initialise system trusted keyrings machine # [ 0.638988] workingset: timestamp_bits=40 max_order=18 bucket_order=0 sshClient # [ 0.559188] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) sshClient # [ 0.560741] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) sshClient # [ 0.562116] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) sshClient # [ 0.563426] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) sshClient # [ 0.564687] TCP: Hash tables configured (established 8192 bind 8192) sshClient # [ 0.565807] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) sshClient # [ 0.567119] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) sshClient # [ 0.568259] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) sshClient # [ 0.569485] NET: Registered PF_UNIX/PF_LOCAL protocol family sshClient # [ 0.570467] NET: Registered PF_XDP protocol family sshClient # [ 0.571319] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] sshClient # [ 0.572381] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] sshClient # [ 0.573393] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] sshClient # [ 0.574530] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] machine # [ 0.662874] Key type asymmetric registered sshClient # [ 0.575747] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] machine # [ 0.663615] Asymmetric key parser 'x509' registered sshClient # [ 0.576818] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] machine # [ 0.664427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) sshClient # [ 0.578579] ACPI: \_SB_.GSIA: Enabled at IRQ 16 machine # [ 0.667719] io scheduler mq-deadline registered sshClient # [ 0.581028] ACPI: \_SB_.GSIB: Enabled at IRQ 17 machine # [ 0.668494] io scheduler kyber registered sshClient # [ 0.582912] ACPI: \_SB_.GSIC: Enabled at IRQ 18 sshClient # [ 0.584906] ACPI: \_SB_.GSID: Enabled at IRQ 19 machine # [ 0.672132] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled sshClient # [ 0.586482] PCI: CLS 0 bytes, default 64 machine # [ 0.673410] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A sshClient # [ 0.587317] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns sshClient # [ 0.589057] Trying to unpack rootfs image as initramfs... machine # [ 0.678739] Linux agpgart interface v0.103 machine # [ 0.679501] ACPI: bus type drm_connector registered machine # [ 0.682839] usbcore: registered new interface driver usbserial_generic machine # [ 0.683972] usbserial: USB Serial support registered for generic machine # [ 0.687610] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. machine # [ 0.687610] Please enable it if your BIOS has the CPPC option. machine # [ 0.689958] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled machine # [ 0.692746] drop_monitor: Initializing network drop monitor service machine # [ 0.693967] NET: Registered PF_INET6 protocol family machine # [ 0.697038] Segment Routing with IPv6 machine # [ 0.699598] In-situ OAM (IOAM) with IPv6 machine # [ 0.700645] IPI shorthand broadcast: enabled machine # [ 0.709009] sched_clock: Marking stable (566014559, 142566577)->(777208464, -68627328) machine # [ 0.713672] registered taskstats version 1 machine # [ 0.714662] Loading compiled-in X.509 certificates sshClient # [ 0.633607] Initialise system trusted keyrings sshClient # [ 0.636730] workingset: timestamp_bits=40 max_order=18 bucket_order=0 machine # [ 0.733599] Demotion targets for Node 0: null machine # [ 0.734463] Key type .fscrypt registered machine # [ 0.735143] Key type fscrypt-provisioning registered machine # [ 0.737704] ima: No TPM chip found, activating TPM-bypass! machine # [ 0.738654] ima: Allocated hash algorithm: sha1 machine # [ 0.739466] ima: No architecture policies found machine # [ 0.743600] PM: Magic number: 10:468:864 sshClient # [ 0.658035] Key type asymmetric registered machine # [ 0.745200] RAS: Correctable Errors collector initialized. sshClient # [ 0.660687] Asymmetric key parser 'x509' registered sshClient # [ 0.661533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) sshClient # [ 0.664806] io scheduler mq-deadline registered sshClient # [ 0.665598] io scheduler kyber registered machine # [ 0.754232] clk: Disabling unused clocks sshClient # [ 0.668229] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled machine # [ 0.756592] PM: genpd: Disabling unused power domains sshClient # [ 0.669529] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A sshClient # [ 0.674951] Linux agpgart interface v0.103 sshClient # [ 0.675783] ACPI: bus type drm_connector registered sshClient # [ 0.678084] usbcore: registered new interface driver usbserial_generic sshClient # [ 0.679195] usbserial: USB Serial support registered for generic sshClient # [ 0.683701] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. sshClient # [ 0.683701] Please enable it if your BIOS has the CPPC option. sshClient # [ 0.685983] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled sshClient # [ 0.688793] drop_monitor: Initializing network drop monitor service sshClient # [ 0.690011] NET: Registered PF_INET6 protocol family sshClient # [ 0.693120] Segment Routing with IPv6 sshClient # [ 0.695705] In-situ OAM (IOAM) with IPv6 sshClient # [ 0.696723] IPI shorthand broadcast: enabled sshClient # [ 0.705053] sched_clock: Marking stable (565013496, 139662982)->(774742667, -70066189) sshClient # [ 0.710849] registered taskstats version 1 sshClient # [ 0.711844] Loading compiled-in X.509 certificates sshClient # [ 0.728176] Demotion targets for Node 0: null sshClient # [ 0.731731] Key type .fscrypt registered sshClient # [ 0.732365] Key type fscrypt-provisioning registered sshClient # [ 0.733329] ima: No TPM chip found, activating TPM-bypass! sshClient # [ 0.735695] ima: Allocated hash algorithm: sha1 sshClient # [ 0.736466] ima: No architecture policies found sshClient # [ 0.739694] PM: Magic number: 10:468:864 sshClient # [ 0.741249] RAS: Correctable Errors collector initialized. sshClient # [ 0.750330] clk: Disabling unused clocks sshClient # [ 0.752689] PM: genpd: Disabling unused power domains machine # [ 0.903385] Freeing initrd memory: 28356K machine # [ 0.906483] Freeing unused decrypted memory: 2028K machine # [ 0.909025] Freeing unused kernel image (initmem) memory: 3644K machine # [ 0.910113] Write protecting the kernel read-only data: 32768k machine # [ 0.911988] Freeing unused kernel image (text/rodata gap) memory: 1208K machine # [ 0.913541] Freeing unused kernel image (rodata/data gap) memory: 752K machine # [ 0.964726] x86/mm: Checked W+X mappings: passed, no W+X pages found. machine # [ 0.965785] Run /init as init process machine # [ 0.975763] systemd[1]: Inserted module 'autofs4' sshClient # [ 0.899338] Freeing initrd memory: 28368K sshClient # [ 0.902405] Freeing unused decrypted memory: 2028K machine # [ 0.991957] fuse: init (API version 7.45) sshClient # [ 0.904872] Freeing unused kernel image (initmem) memory: 3644K sshClient # [ 0.905950] Write protecting the kernel read-only data: 32768k sshClient # [ 0.907842] Freeing unused kernel image (text/rodata gap) memory: 1208K sshClient # [ 0.909332] Freeing unused kernel image (rodata/data gap) memory: 752K machine # [ 0.997865] ACPI: \_SB_.GSIG: Enabled at IRQ 22 machine # [ 1.000253] ACPI: \_SB_.GSIH: Enabled at IRQ 23 machine # [ 1.003117] ACPI: \_SB_.GSIE: Enabled at IRQ 20 machine # [ 1.005713] ACPI: \_SB_.GSIF: Enabled at IRQ 21 machine # [ 1.032364] systemd[1]: Successfully made /usr/ read-only. sshClient # [ 0.960411] x86/mm: Checked W+X mappings: passed, no W+X pages found. sshClient # [ 0.961504] Run /init as init process sshClient # [ 0.971636] systemd[1]: Inserted module 'autofs4' sshClient # [ 0.987789] fuse: init (API version 7.45) sshClient # [ 0.993561] ACPI: \_SB_.GSIG: Enabled at IRQ 22 sshClient # [ 0.996222] ACPI: \_SB_.GSIH: Enabled at IRQ 23 sshClient # [ 0.999414] ACPI: \_SB_.GSIE: Enabled at IRQ 20 sshClient # [ 1.001892] ACPI: \_SB_.GSIF: Enabled at IRQ 21 sshClient # [ 1.033411] systemd[1]: Successfully made /usr/ read-only. machine # [ 1.368780] systemd[1]: systemd 262-b504aa0 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) machine # [ 1.380708] systemd[1]: Detected virtualization kvm. machine # [ 1.382849] systemd[1]: Detected architecture x86-64. machine # [ 1.384937] systemd[1]: Running in initrd. machine # [ 1.387361] systemd[1]: Initializing machine ID from random generator. machine # [ 1.390243] systemd[1]: Hostname set to . sshClient # [ 1.370369] systemd[1]: systemd 262-b504aa0 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) sshClient # [ 1.382184] systemd[1]: Detected virtualization kvm. sshClient # [ 1.384293] systemd[1]: Detected architecture x86-64. sshClient # [ 1.386413] systemd[1]: Running in initrd. sshClient # [ 1.389069] systemd[1]: Initializing machine ID from random generator. machine # [ 1.480121] systemd[1]: bpf-restrict-fs: LSM BPF program attached sshClient # [ 1.391923] systemd[1]: Hostname set to . machine # [ 1.516818] systemd[1]: Queued start job for default target Initrd Default Target. machine # [ 1.520803] systemd[1]: Created slice Slice /system/modprobe. machine # [ 1.522036] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. machine # [ 1.523541] systemd[1]: Expecting device /dev/disk/by-label/nixos... machine # [ 1.524719] systemd[1]: Reached target Path Units. machine # [ 1.525651] systemd[1]: Reached target Slice Units. machine # [ 1.526544] systemd[1]: Reached target Swaps. machine # [ 1.527361] systemd[1]: Reached target Timer Units. machine # [ 1.528340] systemd[1]: Listening on D-Bus System Message Bus Socket. machine # [ 1.529656] systemd[1]: Listening on Journal Socket (/dev/log). machine # [ 1.530846] systemd[1]: Listening on Journal Sockets. machine # [ 1.531853] systemd[1]: Listening on udev Kernel Socket. machine # [ 1.532839] systemd[1]: Reached target Socket Units. machine # [ 1.534632] systemd[1]: Starting Create List of Static Device Nodes... machine # [ 1.538374] systemd[1]: Starting Load Kernel Module 9pnet_virtio... machine # [ 1.545167] systemd[1]: Starting Load Kernel Module configfs... sshClient # [ 1.468055] systemd[1]: bpf-restrict-fs: LSM BPF program attached machine # [ 1.561216] systemd[1]: Starting Journal Service... machine # [ 1.572273] systemd[1]: Starting Load Kernel Modules... machine # [ 1.579672] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 1.504255] systemd[1]: Queued start job for default target Initrd Default Target. sshClient # [ 1.507901] systemd[1]: Created slice Slice /system/modprobe. machine # [ 1.596106] netfs: FS-Cache loaded sshClient # [ 1.509115] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. sshClient # [ 1.510556] systemd[1]: Expecting device /dev/disk/by-label/nixos... sshClient # [ 1.511741] systemd[1]: Reached target Path Units. sshClient # [ 1.512641] systemd[1]: Reached target Slice Units. machine # [ 1.600808] 9pnet: Installing 9P2000 support sshClient # [ 1.513528] systemd[1]: Reached target Swaps. sshClient # [ 1.514345] systemd[1]: Reached target Timer Units. sshClient # [ 1.515345] systemd[1]: Listening on D-Bus System Message Bus Socket. sshClient # [ 1.516564] systemd[1]: Listening on Journal Socket (/dev/log). sshClient # [ 1.517785] systemd[1]: Listening on Journal Sockets. sshClient # [ 1.518789] systemd[1]: Listening on udev Kernel Socket. sshClient # [ 1.519824] systemd[1]: Reached target Socket Units. machine # [ 1.608874] systemd[1]: Starting Coldplug All udev Devices... sshClient # [ 1.521577] systemd[1]: Starting Create List of Static Device Nodes... sshClient # [ 1.525502] systemd[1]: Starting Load Kernel Module 9pnet_virtio... sshClient # [ 1.532888] systemd[1]: Starting Load Kernel Module configfs... machine # [ 1.623701] systemd[1]: Finished Create List of Static Device Nodes. machine # [ 1.630267] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. sshClient # [ 1.545249] systemd[1]: Starting Journal Service... machine # [ 1.637985] systemd[1]: Finished Load Kernel Module 9pnet_virtio. machine # [ 1.643129] systemd[1]: modprobe@configfs.service: Deactivated successfully. sshClient # [ 1.556455] systemd[1]: Starting Load Kernel Modules... machine # [ 1.644931] systemd-journald[67]: Collecting audit messages is disabled. machine # [ 1.649964] systemd[1]: Finished Load Kernel Module configfs. machine # [ 1.656033] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config machine # [ 1.660893] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. sshClient # [ 1.563752] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os machine # [ 1.666655] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... sshClient # [ 1.581212] netfs: FS-Cache loaded machine # [ 1.668613] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev sshClient # [ 1.585828] 9pnet: Installing 9P2000 support sshClient # [ 1.597882] systemd[1]: Starting Coldplug All udev Devices... machine # [ 1.698121] systemd[1]: Finished Load Kernel Modules. sshClient # [ 1.610786] systemd[1]: Finished Create List of Static Device Nodes. sshClient # [ 1.616334] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. machine # [ 1.706466] systemd[1]: Starting Apply Kernel Variables... sshClient # [ 1.625084] systemd[1]: Finished Load Kernel Module 9pnet_virtio. sshClient # [ 1.626567] systemd-journald[67]: Collecting audit messages is disabled. machine # [ 1.716508] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. sshClient # [ 1.631150] systemd[1]: modprobe@configfs.service: Deactivated successfully. sshClient # [ 1.636456] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. machine # [ 1.727780] systemd[1]: Starting Create Static Device Nodes in /dev... sshClient # [ 1.641028] systemd[1]: Finished Load Kernel Module configfs. sshClient # [ 1.645126] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config sshClient # [ 1.649827] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev machine # [ 1.741727] systemd[1]: Finished Apply Kernel Variables. sshClient # [ 1.654494] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... machine # [ 1.759101] systemd[1]: Finished Create Static Device Nodes in /dev. machine # [ 1.618296] systemd-modules-load[68]: Inserted module 'dm_mod' machine # [ 1.620418] systemd-modules-load[68]: Inserted module 'virtio_balloon' machine # [ 1.764128] systemd[1]: Started Journal Service. machine # [ 1.622501] systemd-modules-load[68]: Inserted module 'virtio_gpu' sshClient # [ 1.680197] systemd[1]: Finished Load Kernel Modules. machine # [ 1.633068] systemd[1]: Reached target Preparation for Local File Systems. sshClient # [ 1.688750] systemd[1]: Starting Apply Kernel Variables... machine # [ 1.635064] systemd[1]: Reached target Local File Systems. machine # [ 1.638035] systemd[1]: Starting Create System Files and Directories... machine # [ 1.645069] systemd[1]: Starting Rule-based Manager for Device Events and Files... sshClient # [ 1.702995] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. sshClient # [ 1.712880] systemd[1]: Starting Create Static Device Nodes in /dev... machine # [ 1.669183] systemd[1]: Finished Create System Files and Directories. sshClient # [ 1.725252] systemd[1]: Finished Apply Kernel Variables. sshClient # [ 1.738913] systemd[1]: Started Journal Service. sshClient # [ 1.598717] systemd-modules-load[68]: Inserted module 'dm_mod' sshClient # [ 1.602941] systemd-modules-load[68]: Inserted module 'virtio_balloon' sshClient # [ 1.603927] systemd-modules-load[68]: Inserted module 'virtio_gpu' machine # [ 1.691275] systemd-udevd[83]: Using default interface naming scheme 'v261'. sshClient # [ 1.613946] systemd[1]: Finished Create Static Device Nodes in /dev. sshClient # [ 1.617060] systemd[1]: Reached target Preparation for Local File Systems. sshClient # [ 1.619089] systemd[1]: Reached target Local File Systems. sshClient # [ 1.621079] systemd[1]: Starting Create System Files and Directories... sshClient # [ 1.626075] systemd[1]: Starting Rule-based Manager for Device Events and Files... machine # [ 1.715094] systemd[1]: Started Rule-based Manager for Device Events and Files. sshClient # [ 1.651264] systemd[1]: Finished Create System Files and Directories. sshClient # [ 1.672863] systemd-udevd[83]: Using default interface naming scheme 'v261'. machine # [ 1.760853] systemd[1]: Finished Coldplug All udev Devices. machine # [ 1.761756] systemd[1]: Reached target System Initialization. machine # [ 1.762572] systemd[1]: Reached target Basic System. sshClient # [ 1.698060] systemd[1]: Started Rule-based Manager for Device Events and Files. sshClient # [ 1.747075] systemd[1]: Finished Coldplug All udev Devices. sshClient # [ 1.747876] systemd[1]: Reached target System Initialization. sshClient # [ 1.748689] systemd[1]: Reached target Basic System. machine # [ 2.080718] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 machine # [ 2.089478] virtio_blk virtio5: 1/0/0 default/read/poll queues machine # [ 2.104219] serio: i8042 KBD port at 0x60,0x64 irq 1 machine # [ 2.112075] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) machine # [ 2.118416] serio: i8042 AUX port at 0x60,0x64 irq 12 machine # [ 2.136180] uhci_hcd 0000:00:1d.0: UHCI Host Controller machine # [ 2.151627] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 sshClient # [ 2.065884] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 machine # [ 2.157518] uhci_hcd 0000:00:1d.0: detected 2 ports machine # [ 2.158621] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200 sshClient # [ 2.078592] virtio_blk virtio5: 1/0/0 default/read/poll queues machine # [ 2.165846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 machine # [ 2.167041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 machine # [ 2.176543] SCSI subsystem initialized machine # [ 2.177474] usb usb1: Product: UHCI Host Controller machine # [ 2.178377] usb usb1: Manufacturer: Linux 6.18.50 uhci_hcd machine # [ 2.179212] usb usb1: SerialNumber: 0000:00:1d.0 sshClient # [ 2.092998] serio: i8042 KBD port at 0x60,0x64 irq 1 sshClient # [ 2.093887] serio: i8042 AUX port at 0x60,0x64 irq 12 machine # [ 2.184142] hub 1-0:1.0: USB hub found sshClient # [ 2.098025] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) machine # [ 2.186231] hub 1-0:1.0: 2 ports detected machine # [ 2.192337] ehci-pci 0000:00:1d.7: EHCI Host Controller machine # [ 2.193146] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 machine # [ 2.194854] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 sshClient # [ 2.109217] ehci-pci 0000:00:1d.7: EHCI Host Controller sshClient # [ 2.110068] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 machine # [ 2.201612] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 machine # [ 2.202407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 machine # [ 2.203851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sshClient # [ 2.117746] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 machine # [ 2.206118] usb usb2: Product: EHCI Host Controller machine # [ 2.207690] usb usb2: Manufacturer: Linux 6.18.50 ehci_hcd machine # [ 2.208399] usb usb2: SerialNumber: 0000:00:1d.7 machine # [ 2.210327] hub 2-0:1.0: USB hub found sshClient # [ 2.123704] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 machine # [ 2.211775] hub 2-0:1.0: 6 ports detected sshClient # [ 2.125702] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 sshClient # [ 2.126821] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sshClient # [ 2.130314] usb usb1: Product: EHCI Host Controller sshClient # [ 2.132692] usb usb1: Manufacturer: Linux 6.18.50 ehci_hcd sshClient # [ 2.133400] usb usb1: SerialNumber: 0000:00:1d.7 machine # [ 2.080155] systemd[1]: Starting Virtual Console Setup... sshClient # [ 2.137005] hub 1-0:1.0: USB hub found sshClient # [ 2.137577] hub 1-0:1.0: 6 ports detected sshClient # [ 2.141149] uhci_hcd 0000:00:1d.0: UHCI Host Controller sshClient # [ 2.142457] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 machine # [ 2.234993] hub 1-0:1.0: USB hub found machine # [ 2.237020] hub 1-0:1.0: 2 ports detected sshClient # [ 2.153943] uhci_hcd 0000:00:1d.0: detected 2 ports machine # [ 2.244793] uhci_hcd 0000:00:1d.1: UHCI Host Controller machine # [ 2.245661] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 sshClient # [ 2.160381] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200 sshClient # [ 2.168487] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 machine # [ 2.257099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 machine # [ 2.118295] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones. machine # [ 2.122402] systemd[1]: Finished Virtual Console Setup. sshClient # [ 2.177388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 machine # [ 2.124435] (udev-worker)[91]: Network interface NamePolicy= disabled on kernel command line. sshClient # [ 2.180189] usb usb2: Product: UHCI Host Controller sshClient # [ 2.181740] SCSI subsystem initialized machine # [ 2.129778] (udev-worker)[89]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. sshClient # [ 2.186568] usb usb2: Manufacturer: Linux 6.18.50 uhci_hcd sshClient # [ 2.187319] usb usb2: SerialNumber: 0000:00:1d.0 machine # [ 2.131829] (udev-worker)[89]: Network interface NamePolicy= disabled on kernel command line. machine # [ 2.139083] systemd[1]: Found device /dev/disk/by-label/nixos. machine # [ 2.139862] systemd[1]: Reached target Initrd Root Device. machine # [ 2.283641] uhci_hcd 0000:00:1d.1: detected 2 ports machine # [ 2.284401] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220 sshClient # [ 2.058059] systemd[1]: Starting Virtual Console Setup... machine # [ 2.144298] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... sshClient # [ 2.062658] (udev-worker)[90]: Network interface NamePolicy= disabled on kernel command line. sshClient # [ 2.208172] hub 2-0:1.0: USB hub found machine # [ 2.304613] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 machine # [ 2.305802] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sshClient # [ 2.220697] hub 2-0:1.0: 2 ports detected sshClient # [ 2.222785] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 machine # [ 2.172892] systemd-fsck[106]: nixos: clean, 12/65536 files, 13019/262144 blocks sshClient # [ 2.089798] (udev-worker)[87]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. sshClient # [ 2.091745] (udev-worker)[87]: Network interface NamePolicy= disabled on kernel command line. machine # [ 2.177597] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. sshClient # [ 2.097633] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones. machine # [ 2.326592] usb usb3: Product: UHCI Host Controller machine # [ 2.327246] usb usb3: Manufacturer: Linux 6.18.50 uhci_hcd sshClient # [ 2.101717] systemd[1]: Finished Virtual Console Setup. machine # [ 2.330730] usb usb3: SerialNumber: 0000:00:1d.1 machine # [ 2.333821] hub 3-0:1.0: USB hub found machine # [ 2.337671] hub 3-0:1.0: 2 ports detected sshClient # [ 2.253035] uhci_hcd 0000:00:1d.1: UHCI Host Controller sshClient # [ 2.253784] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 machine # [ 2.342656] uhci_hcd 0000:00:1d.2: UHCI Host Controller machine # [ 2.343391] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 machine # [ 2.345751] uhci_hcd 0000:00:1d.2: detected 2 ports machine # [ 2.346517] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240 machine # [ 2.349832] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 machine # [ 2.352686] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sshClient # [ 2.266710] uhci_hcd 0000:00:1d.1: detected 2 ports machine # [ 2.354660] usb usb4: Product: UHCI Host Controller sshClient # [ 2.267450] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220 machine # [ 2.355340] usb usb4: Manufacturer: Linux 6.18.50 uhci_hcd sshClient # [ 2.134906] systemd[1]: Found device /dev/disk/by-label/nixos. sshClient # [ 2.135742] systemd[1]: Reached target Initrd Root Device. sshClient # [ 2.276337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 sshClient # [ 2.278689] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 machine # [ 2.366374] usb usb4: SerialNumber: 0000:00:1d.2 sshClient # [ 2.140329] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... machine # [ 2.368852] hub 4-0:1.0: USB hub found sshClient # [ 2.281771] usb usb3: Product: UHCI Host Controller sshClient # [ 2.282419] usb usb3: Manufacturer: Linux 6.18.50 uhci_hcd machine # [ 2.371591] hub 4-0:1.0: 2 ports detected sshClient # [ 2.288770] usb usb3: SerialNumber: 0000:00:1d.1 sshClient # [ 2.290795] hub 3-0:1.0: USB hub found sshClient # [ 2.292446] hub 3-0:1.0: 2 ports detected machine # [ 2.380610] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode machine # [ 2.384608] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) machine # [ 2.385468] ahci 0000:00:1f.2: flags: 64bit ncq only sshClient # [ 2.300121] uhci_hcd 0000:00:1d.2: UHCI Host Controller sshClient # [ 2.300921] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 machine # [ 2.394219] scsi host0: ahci machine # [ 2.396474] scsi host1: ahci machine # [ 2.397652] scsi host2: ahci sshClient # [ 2.171115] systemd-fsck[108]: nixos: clean, 12/65536 files, 13019/262144 blocks sshClient # [ 2.312057] uhci_hcd 0000:00:1d.2: detected 2 ports machine # [ 2.399812] scsi host3: ahci sshClient # [ 2.314999] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240 machine # [ 2.403837] scsi host4: ahci sshClient # [ 2.178156] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. machine # [ 2.406425] scsi host5: ahci machine # [ 2.407031] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1 sshClient # [ 2.321540] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 machine # [ 2.409958] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1 machine # [ 2.411041] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1 sshClient # [ 2.323939] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 machine # [ 2.412246] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1 machine # [ 2.413365] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1 sshClient # [ 2.326747] usb usb4: Product: UHCI Host Controller machine # [ 2.414493] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1 sshClient # [ 2.327495] usb usb4: Manufacturer: Linux 6.18.50 uhci_hcd sshClient # [ 2.329992] usb usb4: SerialNumber: 0000:00:1d.2 sshClient # [ 2.331443] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode sshClient # [ 2.332792] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) sshClient # [ 2.333624] ahci 0000:00:1f.2: flags: 64bit ncq only sshClient # [ 2.335259] hub 4-0:1.0: USB hub found sshClient # [ 2.337160] hub 4-0:1.0: 2 ports detected sshClient # [ 2.344644] scsi host0: ahci sshClient # [ 2.345426] scsi host1: ahci sshClient # [ 2.349756] scsi host2: ahci sshClient # [ 2.350432] scsi host3: ahci sshClient # [ 2.353764] scsi host4: ahci sshClient # [ 2.355039] scsi host5: ahci sshClient # [ 2.355607] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1 machine # [ 2.449670] usb 2-1: new high-speed USB device number 2 using ehci-pci sshClient # [ 2.367721] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1 sshClient # [ 2.375072] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1 sshClient # [ 2.376266] usb 1-1: new high-speed USB device number 2 using ehci-pci sshClient # [ 2.381707] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1 sshClient # [ 2.386711] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1 sshClient # [ 2.388814] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1 machine # [ 2.579777] usb 2-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 machine # [ 2.582551] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 machine # [ 2.585697] usb 2-1: Product: QEMU USB Tablet machine # [ 2.587423] usb 2-1: Manufacturer: QEMU machine # [ 2.589026] usb 2-1: SerialNumber: 28754-0000:00:1d.7-1 sshClient # [ 2.505864] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 sshClient # [ 2.508870] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 sshClient # [ 2.512093] usb 1-1: Product: QEMU USB Tablet sshClient # [ 2.513925] usb 1-1: Manufacturer: QEMU sshClient # [ 2.515647] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 machine # [ 2.619092] hid: raw HID events driver (C) Jiri Kosina machine # [ 2.480793] systemd[1]: Mounting /sysroot... sshClient # [ 2.549787] hid: raw HID events driver (C) Jiri Kosina sshClient # [ 2.468328] systemd[1]: Mounting /sysroot... machine # [ 2.728782] ata1: SATA link down (SStatus 0 SControl 300) machine # [ 2.730957] ata2: SATA link down (SStatus 0 SControl 300) machine # [ 2.733629] ata5: SATA link down (SStatus 0 SControl 300) machine # [ 2.735735] ata4: SATA link down (SStatus 0 SControl 300) machine # [ 2.738111] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) machine # [ 2.740382] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 machine # [ 2.742616] ata3.00: applying bridge limits machine # [ 2.744320] ata6: SATA link down (SStatus 0 SControl 300) machine # [ 2.746649] ata3.00: configured for UDMA/100 machine # [ 2.748927] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 sshClient # [ 2.703391] ata2: SATA link down (SStatus 0 SControl 300) sshClient # [ 2.705769] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) sshClient # [ 2.708103] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 sshClient # [ 2.710575] ata3.00: applying bridge limits sshClient # [ 2.712572] ata5: SATA link down (SStatus 0 SControl 300) sshClient # [ 2.715112] ata4: SATA link down (SStatus 0 SControl 300) sshClient # [ 2.717379] ata1: SATA link down (SStatus 0 SControl 300) sshClient # [ 2.719728] ata6: SATA link down (SStatus 0 SControl 300) sshClient # [ 2.722010] ata3.00: configured for UDMA/100 machine # [ 2.813312] usbcore: registered new interface driver usbhid sshClient # [ 2.724550] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 machine # [ 2.817611] usbhid: USB HID core driver machine # [ 2.841911] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input2 machine # [ 2.843716] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 machine # [ 2.856635] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray machine # [ 2.864067] EXT4-fs (vda): mounted filesystem a462209d-1575-4a2d-95e8-c78a99b96ed8 r/w with ordered data mode. Quota mode: none. machine # [ 2.866679] cdrom: Uniform CD-ROM driver Revision: 3.20 machine # [ 2.727803] systemd[1]: Mounted /sysroot. machine # [ 2.730068] systemd[1]: Reached target Initrd Root File System. machine # [ 2.732696] systemd[1]: Starting Mountpoints Configured in the Real Root... sshClient # [ 2.795106] usbcore: registered new interface driver usbhid sshClient # [ 2.800135] usbhid: USB HID core driver machine # [ 2.747588] systemd-sysroot-fstab-check[138]: /sysroot should be mounted in the initrd, will request daemon-reload. machine # [ 2.753064] systemd[1]: Reload requested from client PID 138 ('systemd-sysroot') (unit initrd-parse-etc.service)... machine # [ 2.754572] systemd[1]: Reloading... sshClient # [ 2.822275] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 sshClient # [ 2.826001] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 sshClient # [ 2.832744] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray sshClient # [ 2.843071] cdrom: Uniform CD-ROM driver Revision: 3.20 sshClient # [ 2.848103] EXT4-fs (vda): mounted filesystem c2084ef1-ebc8-4212-864b-d1adbff32cdc r/w with ordered data mode. Quota mode: none. sshClient # [ 2.714913] systemd[1]: Mounted /sysroot. sshClient # [ 2.717591] systemd[1]: Reached target Initrd Root File System. sshClient # [ 2.722672] systemd[1]: Mounting /sysroot/nix/.ro-store... sshClient # [ 2.725803] systemd[1]: Mounting /sysroot/nix/.rw-store... sshClient # [ 2.731288] systemd[1]: Mounting /sysroot/run... sshClient # [ 2.735145] systemd[1]: Mounting /sysroot/tmp/shared... machine # [ 2.829453] systemd[1]: Reloading finished in 76 ms. sshClient # [ 2.745447] systemd[1]: Mounting /sysroot/tmp/xchg... machine # [ 2.837769] systemd-sysroot-fstab-check[138]: Requesting initrd-fs.target/start/replace... machine # [ 2.842176] systemd-sysroot-fstab-check[138]: Requesting swap.target/start/replace... sshClient # [ 2.758417] systemd[1]: Starting Mountpoints Configured in the Real Root... machine # [ 2.845078] systemd[1]: initrd-parse-etc.service: Deactivated successfully. machine # [ 2.846380] systemd[1]: Finished Mountpoints Configured in the Real Root. machine # [ 2.847478] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. machine # [ 2.850196] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio sshClient # [ 2.787850] systemd-sysroot-fstab-check[146]: /sysroot should be mounted in the initrd, will request daemon-reload. sshClient # [ 2.941483] 9p: Installing v9fs 9p2000 file system support sshClient # [ 2.814761] systemd[1]: Mounted /sysroot/nix/.rw-store. sshClient # [ 2.816384] systemd[1]: Mounted /sysroot/nix/.ro-store. sshClient # [ 2.818794] systemd[1]: Mounted /sysroot/run. sshClient # [ 2.822056] systemd[1]: Mounted /sysroot/tmp/shared. sshClient # [ 2.822738] systemd[1]: Mounted /sysroot/tmp/xchg. sshClient # [ 2.826935] systemd[1]: Reload requested from client PID 146 ('systemd-sysroot') (unit initrd-parse-etc.service)... sshClient # [ 2.829160] systemd[1]: Reloading... sshClient # [ 2.890464] systemd[1]: Reloading finished in 61 ms. sshClient # [ 2.899488] systemd-sysroot-fstab-check[146]: Requesting initrd-fs.target/start/replace... sshClient # [ 2.904451] systemd-sysroot-fstab-check[146]: Requesting swap.target/start/replace... sshClient # [ 2.906062] systemd[1]: Starting rw-sysroot-nix-store.service... sshClient # [ 2.907387] systemd[1]: initrd-parse-etc.service: Deactivated successfully. sshClient # [ 2.909549] systemd[1]: Finished Mountpoints Configured in the Real Root. sshClient # [ 2.910569] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. sshClient # [ 2.923417] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. sshClient # [ 2.924847] systemd[1]: Finished rw-sysroot-nix-store.service. machine # [ 3.482165] systemd[1]: Mounting /sysroot/nix/.ro-store... machine # [ 3.488171] systemd[1]: Mounting /sysroot/nix/.rw-store... machine # [ 3.495891] systemd[1]: Mounting /sysroot/run... machine # [ 3.505831] systemd[1]: Mounting /sysroot/tmp/shared... machine # [ 3.517161] systemd[1]: Mounting /sysroot/tmp/xchg... sshClient # [ 3.468082] systemd[1]: Mounting /sysroot/nix/store... machine # [ 3.562116] systemd[1]: Mounted /sysroot/nix/.rw-store. machine # [ 3.562882] systemd[1]: Mounted /sysroot/run. machine # [ 3.706387] 9p: Installing v9fs 9p2000 file system support machine # [ 3.570098] systemd[1]: Starting rw-sysroot-nix-store.service... machine # [ 3.572754] systemd[1]: Mounted /sysroot/nix/.ro-store. machine # [ 3.573753] systemd[1]: Mounted /sysroot/tmp/shared. machine # [ 3.574752] systemd[1]: Mounted /sysroot/tmp/xchg. machine # [ 3.585463] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. machine # [ 3.588038] systemd[1]: Finished rw-sysroot-nix-store.service. machine # [ 3.589040] systemd[1]: Mounting /sysroot/nix/store... sshClient # [ 3.516718] systemd[1]: Mounted /sysroot/nix/store. sshClient # [ 3.519601] systemd[1]: Reached target Initrd File Systems. sshClient # [ 3.522900] systemd[1]: Starting Find NixOS closure... machine # [ 3.608749] systemd[1]: Mounted /sysroot/nix/store. machine # [ 3.610064] systemd[1]: Reached target Initrd File Systems. machine # [ 3.611776] systemd[1]: Starting Find NixOS closure... sshClient # [ 3.527245] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... machine # [ 3.615135] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... machine # [ 3.633056] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. sshClient # [ 3.552787] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. machine # [ 3.640306] systemd[1]: Finished Find NixOS closure. sshClient # [ 3.555463] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. machine # [ 3.641577] systemd[1]: Reached target Initrd Default Target. machine # [ 3.643532] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... sshClient # [ 3.563899] systemd[1]: Finished Find NixOS closure. sshClient # [ 3.565957] systemd[1]: Reached target Initrd Default Target. sshClient # [ 3.567076] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... machine # [ 3.657435] systemd[1]: Stopped target Initrd Default Target. machine # [ 3.658470] systemd[1]: Stopped target Basic System. machine # [ 3.659407] systemd[1]: Stopped target Initrd Root Device. machine # [ 3.661050] systemd[1]: Stopped target Path Units. machine # [ 3.661692] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. machine # [ 3.662667] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. machine # [ 3.663644] systemd[1]: Stopped target Slice Units. machine # [ 3.664338] systemd[1]: Stopped target Socket Units. machine # [ 3.665168] systemd[1]: Stopped target System Initialization. sshClient # [ 3.581035] systemd[1]: Stopped target Initrd Default Target. machine # [ 3.666249] systemd[1]: Stopped target Swaps. sshClient # [ 3.582280] systemd[1]: Stopped target Basic System. machine # [ 3.667312] systemd[1]: Stopped target Timer Units. sshClient # [ 3.583202] systemd[1]: Stopped target Initrd Root Device. machine # [ 3.668096] systemd[1]: dbus.socket: Deactivated successfully. machine # [ 3.669166] systemd[1]: Closed D-Bus System Message Bus Socket. sshClient # [ 3.585114] systemd[1]: Stopped target Path Units. sshClient # [ 3.585776] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. machine # [ 3.670262] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. sshClient # [ 3.586754] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. machine # [ 3.671938] systemd[1]: Stopped Find NixOS closure. sshClient # [ 3.587757] systemd[1]: Stopped target Slice Units. sshClient # [ 3.588472] systemd[1]: Stopped target Socket Units. machine # [ 3.672636] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio sshClient # [ 3.589382] systemd[1]: Stopped target System Initialization. machine # [ 3.674357] systemd[1]: Starting rw-sysroot-nix-store.service... sshClient # [ 3.590196] systemd[1]: Stopped target Swaps. sshClient # [ 3.590803] systemd[1]: Stopped target Timer Units. machine # [ 3.676096] systemd[1]: systemd-sysctl.service: Deactivated successfully. sshClient # [ 3.591830] systemd[1]: dbus.socket: Deactivated successfully. machine # [ 3.677231] systemd[1]: Stopped Apply Kernel Variables. sshClient # [ 3.592984] systemd[1]: Closed D-Bus System Message Bus Socket. machine # [ 3.678250] systemd[1]: systemd-modules-load.service: Deactivated successfully. sshClient # [ 3.594051] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. machine # [ 3.680121] systemd[1]: Stopped Load Kernel Modules. sshClient # [ 3.595646] systemd[1]: Stopped Find NixOS closure. machine # [ 3.680797] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. sshClient # [ 3.597110] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio machine # [ 3.681937] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. machine # [ 3.682962] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. sshClient # [ 3.599261] systemd[1]: Starting rw-sysroot-nix-store.service... sshClient # [ 3.600324] systemd[1]: systemd-sysctl.service: Deactivated successfully. machine # [ 3.685097] systemd[1]: Stopped Create System Files and Directories. machine # [ 3.685967] systemd[1]: Stopped target Local File Systems. sshClient # [ 3.602166] systemd[1]: Stopped Apply Kernel Variables. machine # [ 3.686701] systemd[1]: Stopped target Preparation for Local File Systems. sshClient # [ 3.603181] systemd[1]: systemd-modules-load.service: Deactivated successfully. machine # [ 3.687585] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. machine # [ 3.688661] systemd[1]: Stopped Coldplug All udev Devices. sshClient # [ 3.604452] systemd[1]: Stopped Load Kernel Modules. sshClient # [ 3.605454] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. sshClient # [ 3.606856] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. machine # [ 3.691607] systemd[1]: Stopping Rule-based Manager for Device Events and Files... sshClient # [ 3.608108] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. machine # [ 3.692626] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. machine # [ 3.693607] systemd[1]: Stopped Virtual Console Setup. sshClient # [ 3.609176] systemd[1]: Stopped Create System Files and Directories. sshClient # [ 3.610530] systemd[1]: Stopped target Local File Systems. sshClient # [ 3.611420] systemd[1]: Stopped target Preparation for Local File Systems. sshClient # [ 3.613092] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. sshClient # [ 3.615517] systemd[1]: Stopped Coldplug All udev Devices. machine # [ 3.703133] systemd[1]: initrd-cleanup.service: Deactivated successfully. sshClient # [ 3.618632] systemd[1]: Stopping Rule-based Manager for Device Events and Files... sshClient # [ 3.619668] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. machine # [ 3.704657] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. sshClient # [ 3.620631] systemd[1]: Stopped Virtual Console Setup. machine # [ 3.710116] systemd[1]: systemd-udevd.service: Deactivated successfully. machine # [ 3.713068] systemd[1]: Stopped Rule-based Manager for Device Events and Files. machine # [ 3.714110] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. sshClient # [ 3.629773] systemd[1]: systemd-udevd.service: Deactivated successfully. machine # [ 3.715500] systemd[1]: Finished rw-sysroot-nix-store.service. sshClient # [ 3.633088] systemd[1]: Stopped Rule-based Manager for Device Events and Files. machine # [ 3.718118] systemd[1]: Starting Cleanup udev Database... sshClient # [ 3.634163] systemd[1]: initrd-cleanup.service: Deactivated successfully. machine # [ 3.718840] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. machine # [ 3.720133] systemd[1]: Stopped Create Static Device Nodes in /dev. machine # [ 3.721089] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. sshClient # [ 3.636854] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. machine # [ 3.722535] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. machine # [ 3.723546] systemd[1]: kmod-static-nodes.service: Deactivated successfully. machine # [ 3.725142] systemd[1]: Stopped Create List of Static Device Nodes. sshClient # [ 3.641694] systemd[1]: Starting Cleanup udev Database... sshClient # [ 3.643154] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. sshClient # [ 3.644210] systemd[1]: Stopped Create Static Device Nodes in /dev. sshClient # [ 3.645077] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. sshClient # [ 3.646152] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. sshClient # [ 3.648128] systemd[1]: kmod-static-nodes.service: Deactivated successfully. sshClient # [ 3.649064] systemd[1]: Stopped Create List of Static Device Nodes. sshClient # [ 3.650277] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. sshClient # [ 3.651335] systemd[1]: Finished rw-sysroot-nix-store.service. machine # [ 3.739670] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. machine # [ 3.741298] systemd[1]: Finished Cleanup udev Database. machine # [ 3.743168] systemd[1]: Reached target Switch Root. machine # [ 3.744431] systemd[1]: Starting NixOS Activation... sshClient # [ 3.666980] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. sshClient # [ 3.668518] systemd[1]: Finished Cleanup udev Database. sshClient # [ 3.670168] systemd[1]: Reached target Switch Root. sshClient # [ 3.671286] systemd[1]: Starting NixOS Activation... sshClient # [ 3.808228] initrd-nixos-activation-start[193]: booting system configuration /nix/store/g5ipi34i83wr7vvwhd5xxlx7i471v7wy-nixos-system-sshClient-test machine # [ 3.892804] initrd-nixos-activation-start[191]: booting system configuration /nix/store/0nbzfpaz7w2imqsmkiripzvb3dcnhb1q-nixos-system-machine-test machine # [ 3.954746] initrd-nixos-activation-start[191]: running activation script... sshClient # [ 3.871269] initrd-nixos-activation-start[193]: running activation script... machine # [ 4.339831] initrd-nixos-activation-start[214]: setting up /etc... sshClient # [ 4.271090] initrd-nixos-activation-start[216]: setting up /etc... machine # [ 4.569532] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. machine # [ 4.571948] systemd[1]: Finished NixOS Activation. machine # [ 4.572886] systemd[1]: Starting Switch Root... machine # [ 4.586440] systemd[1]: Switching root. sshClient # [ 4.520428] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. sshClient # [ 4.521978] systemd[1]: Finished NixOS Activation. sshClient # [ 4.523887] systemd[1]: Starting Switch Root... sshClient # [ 4.537430] systemd[1]: Switching root. machine # [ 4.858176] systemd-journald[67]: Received SIGTERM from PID 1 (systemd). sshClient # [ 4.809068] systemd-journald[67]: Received SIGTERM from PID 1 (systemd). machine # [ 4.989279] NET: Registered PF_VSOCK protocol family sshClient # [ 4.935125] NET: Registered PF_VSOCK protocol family machine # [ 5.362529] systemd[1]: systemd 262-b504aa0 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) machine # [ 5.366317] systemd[1]: Detected virtualization kvm. machine # [ 5.367004] systemd[1]: Detected architecture x86-64. machine # [ 5.367768] systemd[1]: Detected first boot. machine # [ 5.370525] systemd[1]: Initializing machine ID from random generator. sshClient # [ 5.313605] systemd[1]: systemd 262-b504aa0 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) sshClient # [ 5.321730] systemd[1]: Detected virtualization kvm. sshClient # [ 5.323476] systemd[1]: Detected architecture x86-64. sshClient # [ 5.325361] systemd[1]: Detected first boot. sshClient # [ 5.330647] systemd[1]: Initializing machine ID from random generator. machine # [ 5.471055] systemd[1]: bpf-restrict-fs: LSM BPF program attached sshClient # [ 5.429728] systemd[1]: bpf-restrict-fs: LSM BPF program attached machine # [ 5.587203] systemd[1]: Applying preset policy. sshClient # [ 5.530507] systemd[1]: Applying preset policy. sshClient # [ 5.932381] systemd[1]: Populated /etc with preset unit settings. machine # [ 6.027730] systemd[1]: Populated /etc with preset unit settings. sshClient # [ 6.365386] systemd[1]: initrd-switch-root.service: Deactivated successfully. sshClient # [ 6.366682] systemd[1]: Stopped initrd-switch-root.service. sshClient # [ 6.369114] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. sshClient # [ 6.371214] systemd[1]: Created slice Slice /system/getty. sshClient # [ 6.372577] systemd[1]: Created slice User and Session Slice. sshClient # [ 6.373705] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. sshClient # [ 6.374948] systemd[1]: Started Forward Password Requests to Wall Directory Watch. sshClient # [ 6.376061] systemd[1]: Expecting device /dev/hvc0... sshClient # [ 6.376804] systemd[1]: Expecting device /dev/ttyS0... sshClient # [ 6.377586] systemd[1]: Reached target Local Encrypted Volumes. machine # [ 6.465326] systemd[1]: initrd-switch-root.service: Deactivated successfully. sshClient # [ 6.378442] systemd[1]: Stopped target initrd-fs.target. sshClient # [ 6.379167] systemd[1]: Stopped target initrd-root-fs.target. machine # [ 6.466632] systemd[1]: Stopped initrd-switch-root.service. sshClient # [ 6.379974] systemd[1]: Stopped target initrd-switch-root.target. sshClient # [ 6.380863] systemd[1]: Reached target Virtual Machines and Containers. sshClient # [ 6.381814] systemd[1]: Reached target Path Units. machine # [ 6.469006] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. sshClient # [ 6.382472] systemd[1]: Reached target Remote File Systems. sshClient # [ 6.383260] systemd[1]: Reached target Slice Units. machine # [ 6.471098] systemd[1]: Created slice Slice /system/getty. sshClient # [ 6.384017] systemd[1]: Reached target Swaps. machine # [ 6.472445] systemd[1]: Created slice User and Session Slice. machine # [ 6.473552] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. machine # [ 6.474779] systemd[1]: Started Forward Password Requests to Wall Directory Watch. machine # [ 6.475843] systemd[1]: Expecting device /dev/hvc0... machine # [ 6.476544] systemd[1]: Expecting device /dev/ttyS0... machine # [ 6.477270] systemd[1]: Reached target Local Encrypted Volumes. machine # [ 6.478098] systemd[1]: Stopped target initrd-fs.target. machine # [ 6.478862] systemd[1]: Stopped target initrd-root-fs.target. machine # [ 6.479658] systemd[1]: Stopped target initrd-switch-root.target. machine # [ 6.480499] systemd[1]: Reached target Virtual Machines and Containers. machine # [ 6.481715] systemd[1]: Reached target Path Units. sshClient # [ 6.386803] systemd[1]: Listening on Query the User Interactively for a Password. sshClient # [ 6.401834] systemd[1]: Listening on Process Core Dump Socket. sshClient # [ 6.404395] systemd[1]: Listening on Credential Encryption/Decryption. machine # [ 6.482476] systemd[1]: Reached target Remote File Systems. sshClient # [ 6.406758] systemd[1]: Listening on Factory Reset Management. machine # [ 6.494514] systemd[1]: Reached target Slice Units. sshClient # [ 6.407614] systemd[1]: Listening on Hostname Service Socket. machine # [ 6.495216] systemd[1]: Reached target Swaps. sshClient # [ 6.411048] systemd[1]: Starting Journal Log Access Socket... machine # [ 6.498815] systemd[1]: Listening on Query the User Interactively for a Password. sshClient # [ 6.412863] systemd[1]: Listening on Journal Audit Socket. machine # [ 6.502351] systemd[1]: Listening on Process Core Dump Socket. sshClient # [ 6.415722] systemd[1]: Listening on Console Output Muting Service Socket. sshClient # [ 6.416854] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. machine # [ 6.505045] systemd[1]: Listening on Credential Encryption/Decryption. sshClient # [ 6.418221] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 6.419563] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki machine # [ 6.507654] systemd[1]: Listening on Factory Reset Management. machine # [ 6.508505] systemd[1]: Listening on Hostname Service Socket. machine # [ 6.512154] systemd[1]: Starting Journal Log Access Socket... machine # [ 6.514232] systemd[1]: Listening on Journal Audit Socket. sshClient # [ 6.427867] systemd[1]: Listening on Disk Repartitioning Service Socket. sshClient # [ 6.428909] systemd[1]: Listening on udev Varlink Socket. sshClient # [ 6.429812] systemd[1]: Listening on User Database Manager Socket. machine # [ 6.517238] systemd[1]: Listening on Console Output Muting Service Socket. machine # [ 6.518353] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. machine # [ 6.519613] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 6.433253] systemd[1]: Mounting Huge Pages File System... machine # [ 6.520881] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki sshClient # [ 6.436382] systemd[1]: Mounting POSIX Message Queue File System... machine # [ 6.530043] systemd[1]: Listening on Disk Repartitioning Service Socket. sshClient # [ 6.443061] systemd[1]: Mounting Kernel Debug File System... machine # [ 6.531104] systemd[1]: Listening on udev Varlink Socket. machine # [ 6.532001] systemd[1]: Listening on User Database Manager Socket. sshClient # [ 6.446774] systemd[1]: Mounting Kernel Trace File System... machine # [ 6.535656] systemd[1]: Mounting Huge Pages File System... machine # [ 6.538666] systemd[1]: Mounting POSIX Message Queue File System... sshClient # [ 6.452809] systemd[1]: Starting Create List of Static Device Nodes... machine # [ 6.544376] systemd[1]: Mounting Kernel Debug File System... sshClient # [ 6.456391] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio machine # [ 6.550398] systemd[1]: Mounting Kernel Trace File System... sshClient # [ 6.467283] systemd[1]: Starting Load Kernel Module configfs... sshClient # [ 6.468226] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm sshClient # [ 6.469871] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore machine # [ 6.557953] systemd[1]: Starting Create List of Static Device Nodes... machine # [ 6.558966] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio sshClient # [ 6.472156] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse sshClient # [ 6.480194] systemd[1]: Mounting FUSE Control File System... machine # [ 6.569148] systemd[1]: Starting Load Kernel Module configfs... sshClient # [ 6.481744] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 machine # [ 6.570249] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm machine # [ 6.572360] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore machine # [ 6.574277] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse machine # [ 6.585094] systemd[1]: Mounting FUSE Control File System... machine # [ 6.586677] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 sshClient # [ 6.518052] systemd[1]: Starting Journal Service... machine # [ 6.615440] systemd[1]: Starting Journal Service... sshClient # [ 6.536739] systemd[1]: Starting Load Kernel Modules... machine # [ 6.635135] systemd[1]: Starting Load Kernel Modules... sshClient # [ 6.555569] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... sshClient # [ 6.563814] systemd[1]: Starting Remount Root and Kernel File Systems... machine # [ 6.653255] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... sshClient # [ 6.567934] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os machine # [ 6.665824] systemd[1]: Starting Remount Root and Kernel File Systems... machine # [ 6.669480] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 6.583110] systemd[1]: Starting Coldplug All udev Devices... machine # [ 6.685371] systemd[1]: Starting Coldplug All udev Devices... sshClient # [ 6.602318] systemd[1]: Listening on Journal Log Access Socket. sshClient # [ 6.608577] systemd[1]: Mounted Huge Pages File System. sshClient # [ 6.612577] systemd-journald[287]: Collecting audit messages is enabled. sshClient # [ 6.613778] systemd[1]: Mounted POSIX Message Queue File System. sshClient # [ 6.619998] systemd[1]: Mounted Kernel Debug File System. machine # [ 6.710660] systemd[1]: Listening on Journal Log Access Socket. sshClient # [ 6.624057] systemd[1]: Mounted Kernel Trace File System. machine # [ 6.715772] systemd[1]: Mounted Huge Pages File System. sshClient # [ 6.629580] systemd[1]: Finished Create List of Static Device Nodes. machine # [ 6.719631] systemd-journald[285]: Collecting audit messages is enabled. machine # [ 6.721848] systemd[1]: Mounted POSIX Message Queue File System. sshClient # [ 6.634994] systemd[1]: modprobe@configfs.service: Deactivated successfully. machine # [ 6.725708] systemd[1]: Mounted Kernel Debug File System. sshClient # [ 6.641858] loop: module loaded sshClient # [ 6.642379] EXT4-fs (vda): re-mounted c2084ef1-ebc8-4212-864b-d1adbff32cdc. sshClient # [ 6.643814] systemd[1]: Finished Load Kernel Module configfs. machine # [ 6.732202] systemd[1]: Mounted Kernel Trace File System. machine # [ 6.733602] EXT4-fs (vda): re-mounted a462209d-1575-4a2d-95e8-c78a99b96ed8. sshClient # [ 6.652072] systemd[1]: Mounted FUSE Control File System. sshClient # [ 6.514438] systemd[1]: Queued start job for default target Multi-User System. machine # [ 6.742290] systemd[1]: Finished Create List of Static Device Nodes. sshClient # [ 6.516189] systemd[1]: systemd-journald.service: Deactivated successfully. machine # [ 6.744748] loop: module loaded sshClient # [ 6.518672] systemd-modules-load[288]: Inserted module 'loop' sshClient # [ 6.659231] systemd[1]: Started Journal Service. machine # [ 6.748519] systemd[1]: modprobe@configfs.service: Deactivated successfully. sshClient # [ 6.526579] systemd[1]: Finished Load Kernel Modules. machine # [ 6.754762] systemd[1]: Finished Load Kernel Module configfs. sshClient # [ 6.528677] systemd[1]: Finished Remount Root and Kernel File Systems. machine # [ 6.613647] systemd[1]: Queued start job for default target Multi-User System. machine # [ 6.615604] systemd[1]: systemd-journald.service: Deactivated successfully. machine # [ 6.759179] systemd[1]: Started Journal Service. machine # [ 6.618505] systemd-modules-load[286]: Inserted module 'loop' machine # [ 6.622635] systemd[1]: Mounted FUSE Control File System. machine # [ 6.626201] systemd[1]: Finished Load Kernel Modules. sshClient # [ 6.546063] systemd[1]: Listening on Disk Image Download Service Socket. machine # [ 6.631124] systemd[1]: Finished Remount Root and Kernel File Systems. sshClient # [ 6.553883] systemd[1]: Mounting Kernel Configuration File System... sshClient # [ 6.558847] systemd[1]: Starting Firewall... machine # [ 6.646081] systemd[1]: Listening on Disk Image Download Service Socket. machine # [ 6.651519] systemd[1]: Mounting Kernel Configuration File System... sshClient # [ 6.570400] systemd-oomd[289]: No swap; memory pressure usage will be degraded sshClient # [ 6.574618] systemd[1]: Starting Flush Journal to Persistent Storage... machine # [ 6.660099] systemd[1]: Starting Firewall... sshClient # [ 6.576210] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore machine # [ 6.668855] systemd[1]: Starting Flush Journal to Persistent Storage... machine # [ 6.669915] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore machine # [ 6.672269] systemd-oomd[287]: No swap; memory pressure usage will be degraded sshClient # [ 6.592171] systemd[1]: Starting Load/Save OS Random Seed... sshClient # [ 6.596376] systemd[1]: Starting Apply Kernel Variables... machine # [ 6.686336] systemd[1]: Starting Load/Save OS Random Seed... sshClient # [ 6.605892] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... sshClient # [ 6.606935] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 6.608094] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. machine # [ 6.696281] systemd[1]: Starting Apply Kernel Variables... machine # [ 6.712078] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... machine # [ 6.713319] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os machine # [ 6.714518] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. sshClient # [ 6.778589] systemd-journald[287]: Received client request to flush runtime journal. machine # [ 6.889289] systemd-journald[285]: Received client request to flush runtime journal. sshClient # [ 6.785920] systemd[1]: Mounted Kernel Configuration File System. sshClient # [ 6.787045] systemd[1]: Finished Load/Save OS Random Seed. sshClient # [ 6.791412] systemd[1]: Finished Apply Kernel Variables. sshClient # [ 6.792313] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. sshClient # [ 6.794268] systemd[1]: Starting Create Static Device Nodes in /dev... sshClient # [ 6.796840] systemd[1]: Finished Flush Journal to Persistent Storage. machine # [ 6.890264] systemd[1]: Finished Load/Save OS Random Seed. machine # [ 6.891269] systemd[1]: Mounted Kernel Configuration File System. machine # [ 6.892897] systemd[1]: Finished Apply Kernel Variables. machine # [ 6.895626] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. machine # [ 6.896665] systemd[1]: Starting Create Static Device Nodes in /dev... machine # [ 6.902972] systemd[1]: Finished Flush Journal to Persistent Storage. sshClient # [ 6.854121] systemd[1]: Finished Create Static Device Nodes in /dev. sshClient # [ 6.855386] systemd[1]: Reached target Preparation for Local File Systems. sshClient # [ 6.860614] systemd[1]: Starting Rule-based Manager for Device Events and Files... machine # [ 6.962194] systemd[1]: Finished Create Static Device Nodes in /dev. machine # [ 6.963684] systemd[1]: Reached target Preparation for Local File Systems. machine # [ 6.968361] systemd[1]: Starting Rule-based Manager for Device Events and Files... sshClient # [ 6.928380] systemd[1]: Finished Coldplug All udev Devices. machine # [ 7.031886] systemd[1]: Finished Coldplug All udev Devices. sshClient # [ 6.949274] systemd-udevd[327]: Using default interface naming scheme 'v261'. machine # [ 7.054421] systemd-udevd[326]: Using default interface naming scheme 'v261'. sshClient # [ 7.005877] systemd[1]: Starting User Database Manager... machine # [ 7.112368] systemd[1]: Starting User Database Manager... sshClient # [ 7.057081] systemd[1]: Started User Database Manager. machine # [ 7.164268] systemd[1]: Started User Database Manager. sshClient # [ 7.128435] systemd[1]: Started Rule-based Manager for Device Events and Files. machine # [ 7.237032] systemd[1]: Started Rule-based Manager for Device Events and Files. sshClient # [ 7.234123] systemd[1]: Mounting /run/wrappers... machine # [ 7.328239] systemd[1]: Mounting /run/wrappers... sshClient # [ 7.267505] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse sshClient # [ 7.281110] systemd[1]: Mounted /run/wrappers. sshClient # [ 7.282902] systemd[1]: Reached target Local File Systems. sshClient # [ 7.286890] systemd[1]: Listening on Boot Loader Control Service Socket. sshClient # [ 7.290502] systemd[1]: Starting Create SUID/SGID Wrappers... machine # [ 7.375660] systemd[1]: Mounted /run/wrappers. sshClient # [ 7.292077] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. machine # [ 7.377530] systemd[1]: Reached target Local File Systems. sshClient # [ 7.297038] systemd[1]: Starting Create System Files and Directories... machine # [ 7.381393] systemd[1]: Listening on Boot Loader Control Service Socket. machine # [ 7.385559] systemd[1]: Starting Create SUID/SGID Wrappers... machine # [ 7.386897] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. machine # [ 7.394918] systemd[1]: Starting Create System Files and Directories... machine # [ 7.405879] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse sshClient # [ 7.407430] systemd[1]: Finished Create System Files and Directories. sshClient # [ 7.410594] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. sshClient # [ 7.418568] systemd[1]: Starting Rebuild Journal Catalog... machine # [ 7.508862] systemd[1]: Finished Create System Files and Directories. sshClient # [ 7.429478] systemd[1]: Starting Record System Boot/Shutdown in UTMP... machine # [ 7.520087] systemd[1]: Starting Rebuild Journal Catalog... machine # [ 7.525751] systemd[1]: Starting Record System Boot/Shutdown in UTMP... sshClient # [ 7.500428] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. sshClient # [ 7.515454] systemd[1]: Finished Record System Boot/Shutdown in UTMP. machine # [ 7.621473] systemd[1]: Finished Record System Boot/Shutdown in UTMP. machine # [ 7.635963] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. sshClient # [ 7.562091] systemd[1]: Finished Rebuild Journal Catalog. sshClient # [ 7.567893] (udev-worker)[371]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. sshClient # [ 7.571618] systemd[1]: Starting Update is Completed... sshClient # [ 7.577650] (udev-worker)[380]: Network interface NamePolicy= disabled on kernel command line. machine # [ 7.663471] systemd[1]: Finished Rebuild Journal Catalog. sshClient # [ 7.584100] (udev-worker)[371]: Network interface NamePolicy= disabled on kernel command line. machine # [ 7.671301] systemd[1]: Starting Update is Completed... machine # [ 7.672162] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. sshClient # [ 7.623404] systemd[1]: Finished Update is Completed. machine # [ 7.723364] systemd[1]: Finished Update is Completed. machine # [ 7.733448] (udev-worker)[374]: Network interface NamePolicy= disabled on kernel command line. machine # [ 7.737542] (udev-worker)[380]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. machine # [ 7.740581] (udev-worker)[380]: Network interface NamePolicy= disabled on kernel command line. sshClient # [ 7.728164] systemd[1]: Condition check resulted in Virtio network device being skipped. sshClient # [ 7.730525] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore sshClient # [ 7.732262] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. sshClient # [ 7.734121] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 sshClient # [ 7.736852] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore sshClient # [ 7.739299] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 7.740601] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os machine # [ 7.881523] systemd[1]: Condition check resulted in Virtio network device being skipped. machine # [ 7.883305] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore machine # [ 7.884770] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. machine # [ 7.887292] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 machine # [ 7.889550] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore machine # [ 7.891696] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os machine # [ 7.893493] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os sshClient # [ 7.863184] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. sshClient # [ 7.866085] systemd[1]: Finished Create SUID/SGID Wrappers. sshClient # [ 7.868559] systemd[1]: Reached target System Initialization. sshClient # [ 7.869546] systemd[1]: Started Discard unused filesystem blocks once a week. sshClient # [ 7.871264] systemd[1]: Started Daily Cleanup of Temporary Directories. sshClient # [ 7.873219] systemd[1]: Reached target Timer Units. sshClient # [ 7.874615] systemd[1]: Listening on D-Bus System Message Bus Socket. sshClient # [ 7.875983] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. sshClient # [ 7.877487] systemd[1]: Reached target Socket Units. sshClient # [ 7.879247] systemd[1]: Reached target Basic System. machine # [ 7.965703] systemd[1]: Finished Firewall. sshClient # [ 7.882637] systemd[1]: Started backdoor.service. sshClient # [ 7.886063] systemd[1]: Starting Import lastlog data into lastlog2 database... sshClient # [ 8.033566] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 sshClient # [ 7.897038] systemd[1]: Starting Name Service Cache Daemon (nsncd)... sshClient # [ 7.906925] systemd[1]: Starting Post-Boot Actions... machine # [ 7.998744] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. machine # [ 7.999722] systemd[1]: Finished Create SUID/SGID Wrappers. sshClient # [ 7.916588] systemd[1]: Started Reset console on configuration changes. machine # [ 8.001988] systemd[1]: Reached target System Initialization. machine # [ 8.002903] systemd[1]: Started Discard unused filesystem blocks once a week. machine # [ 8.004066] systemd[1]: Started Daily Cleanup of Temporary Directories. machine # [ 8.006226] systemd[1]: Reached target Timer Units. machine # [ 8.007312] systemd[1]: Listening on D-Bus System Message Bus Socket. machine # [ 8.010360] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). machine # [ 8.011544] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. machine # [ 8.012674] systemd[1]: Reached target Socket Units. machine # [ 8.013527] systemd[1]: Reached target Basic System. machine # [ 8.018405] systemd[1]: Started backdoor.service. sshClient # [ 7.934147] systemd[1]: Starting resolvconf update... machine # [ 8.022053] systemd[1]: Starting Import lastlog data into lastlog2 database... machine # [ 8.031068] systemd[1]: Starting Name Service Cache Daemon (nsncd)... sshClient # [ 8.098152] ACPI: button: Power Button [PWRF] machine # [ 8.043327] systemd[1]: Starting Post-Boot Actions... machine # [ 8.191543] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 machine # [ 8.054339] systemd[1]: Started Reset console on configuration changes. sshClient # [ 7.970622] systemd[1]: Starting Home Area Manager... sshClient # [ 7.989636] systemd[1]: Finished Firewall. machine # [ 8.077841] systemd[1]: Starting resolvconf update... machine # [ 8.229622] mousedev: PS/2 mouse device common for all mice machine # [ 8.093193] systemd[1]: Starting SSH Host Keys Generation... sshClient # connecting to host... sshClient # [ 8.030361] systemd[1]: Finished Post-Boot Actions. sshClient # [ 8.037279] nsncd[506]: Sep 12 02:52:34.384 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" sshClient # [ 8.044877] systemd[1]: Started Name Service Cache Daemon (nsncd). machine # [ 8.142496] systemd[1]: Starting Home Area Manager... sshClient # [ 8.063812] systemd[1]: Reached target Host and Network Name Lookups. sshClient # [ 8.064939] systemd[1]: Reached target User and Group Name Lookups. machine # [ 8.293690] ACPI: button: Power Button [PWRF] sshClient # [ 8.208281] mousedev: PS/2 mouse device common for all mice machine # connecting to host... sshClient # [ 8.078983] systemd[1]: Starting D-Bus System Message Bus... machine # [ 8.174454] nsncd[512]: Sep 12 02:52:34.432 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" machine # [ 8.182878] systemd[1]: Finished Post-Boot Actions. machine # [ 8.185363] systemd[1]: Started Name Service Cache Daemon (nsncd). sshClient # [ 8.109084] systemd[1]: Starting User Login Management... sshClient # [ 8.117806] systemd[1]: Finished Import lastlog data into lastlog2 database. machine: Guest shell says: b'Spawning backdoor root shell...\n' machine # [ 8.218444] systemd[1]: Reached target Host and Network Name Lookups. machine # [ 8.219497] systemd[1]: Reached target User and Group Name Lookups. sshClient # [ 8.271147] rtc_cmos 00:04: RTC can wake from S4 machine # [ 8.233162] systemd[1]: Starting D-Bus System Message Bus... sshClient # [ 8.143511] systemd-homed[511]: Watching /home. machine: connected to guest root shell machine: (connecting took 8.87 seconds) machine: (finished: waiting for the VM to finish booting, in 8.87 seconds) machine # [ 8.399777] rtc_cmos 00:04: RTC can wake from S4 machine # [ 8.266636] systemd[1]: Starting User Login Management... machine # [ 8.284380] systemd[1]: Finished Import lastlog data into lastlog2 database. sshClient # [ 8.346905] parport_pc 00:02: reported by Plug and Play ACPI sshClient # [ 8.349905] rtc_cmos 00:04: registered as rtc0 sshClient # [ 8.356428] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console machine # [ 8.336472] systemd-homed[520]: Watching /home. machine # [ 8.533983] rtc_cmos 00:04: registered as rtc0 machine # [ 8.553876] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console machine # [ 8.571638] rtc_cmos 00:04: setting system clock to 2026-09-12T02:52:34 UTC (1789181554) machine # [ 8.574749] systemd-journald[285]: Time jumped backwards, rotating. machine # [ 8.584515] parport_pc 00:02: reported by Plug and Play ACPI machine # [ 8.500949] systemd[1]: Stopped target Host and Network Name Lookups. sshClient # [ 8.378215] rtc_cmos 00:04: setting system clock to 2026-09-12T02:52:33 UTC (1789181553) sshClient # [ 8.378370] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs sshClient # [ 8.378903] systemd-journald[287]: Time jumped backwards, rotating. sshClient # [ 8.384427] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4 sshClient # [ 8.404238] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] sshClient # [ 8.500177] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized sshClient # [ 8.639248] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt sshClient # [ 8.639360] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD sshClient # [ 8.649570] Console: switching to colour dummy device 80x25 sshClient # [ 8.731179] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 sshClient # [ 8.731439] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 sshClient # [ 8.796890] 8021q: 802.1Q VLAN Support v1.8 sshClient # [ 8.796902] 8021q: adding VLAN 0 to HW filter on device eth1 sshClient # [ 8.293208] systemd[1]: Stopped target Host and Network Name Lookups. sshClient # [ 8.666882] dbus-broker-launch[534]: Looking up NSS user entry for 'systemd-timesync'... sshClient # [ 8.668925] dbus-broker-launch[534]: NSS returned no entry for 'systemd-timesync' sshClient # [ 8.669900] dbus-broker-launch[534]: Invalid user-name in /nix/store/s4c95cll2xnqph4r1xmxkj52bn2gqssk-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" sshClient # [ 8.673433] dhcpcd[618]: dhcpcd-10.3.2 starting sshClient # [ 8.677098] systemd[1]: Stopping Host and Network Name Lookups... sshClient # [ 8.679497] dhcpcd[671]: dev: loaded udev sshClient # [ 8.682493] systemd[1]: Stopped target User and Group Name Lookups. sshClient # [ 8.688145] nsncd[580]: Sep 12 02:52:33.614 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" sshClient # [ 8.690090] systemd[1]: Stopping User and Group Name Lookups... sshClient # [ 8.693224] network-addresses-eth1-start[611]: adding address 192.168.1.2/24... done sshClient # [ 8.694449] network-addresses-eth1-start[611]: adding address 2001:db8:1::2/64... done sshClient # [ 8.695682] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... sshClient # [ 8.700840] systemd[1]: nscd.service: Deactivated successfully. sshClient # [ 8.703282] systemd[1]: Stopped Name Service Cache Daemon (nsncd). sshClient # [ 8.705953] systemd[1]: Starting Name Service Cache Daemon (nsncd)... sshClient # [ 8.706846] systemd[1]: Started D-Bus System Message Bus. sshClient # [ 8.708168] systemd[1]: Started Name Service Cache Daemon (nsncd). sshClient # [ 8.708991] systemd[1]: Reached target Host and Network Name Lookups. sshClient # [ 8.711601] systemd[1]: Reached target User and Group Name Lookups. sshClient # [ 8.713753] dbus-broker-launch[534]: Ready sshClient # [ 8.715232] systemd[1]: Started Home Area Manager. sshClient # [ 8.715889] systemd[1]: Finished Home Area Activation. machine # [ 8.622908] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] sshClient # [ 8.718354] systemd[1]: Starting First Boot Home Area Wizard... sshClient # [ 8.720500] systemd[1]: Finished resolvconf update. sshClient # [ 8.721217] systemd[1]: Reached target Preparation for Network. sshClient # [ 8.723121] systemd[1]: Starting DHCP Client... sshClient # [ 8.723779] systemd[1]: Starting Address configuration of eth1... sshClient # [ 8.864305] [drm] Found bochs VGA, ID 0xb0c5. sshClient # [ 8.864755] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. sshClient # [ 8.726834] systemd[1]: Starting Extra networking commands.... sshClient # [ 8.727708] systemd[1]: Finished Address configuration of eth1. sshClient # [ 8.728553] systemd[1]: Finished Extra networking commands.. sshClient # [ 8.729282] systemd[1]: Reached target Network. sshClient # [ 8.731614] systemd-logind[535]: New seat seat0. sshClient # [ 8.732887] systemd[1]: Started User Login Management. sshClient # [ 8.735178] systemd[1]: Starting linger-users.service... machine # [ 8.648408] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs machine # [ 8.650059] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4 machine # [ 8.722772] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized sshClient # [ 8.765117] systemd[1]: Starting Virtual Console Setup... sshClient # [ 8.766984] systemd[1]: Finished First Boot Home Area Wizard. sshClient # [ 8.915829] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic sshClient # [ 8.916476] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 sshClient # [ 8.779996] systemd[1]: Reached target First Boot Complete. sshClient # [ 8.794411] systemd[1]: Starting Save Transient machine-id to Disk... sshClient # [ 8.807866] systemd[1]: Starting Permit User Sessions... machine # [ 8.944688] Console: switching to colour dummy device 80x25 machine # [ 8.960998] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt machine # [ 8.961110] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD machine # [ 9.050491] [drm] Found bochs VGA, ID 0xb0c5. sshClient # [ 8.824129] systemd[1]: linger-users.service: Deactivated successfully. machine # [ 9.050493] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. machine # [ 8.506715] dbus-broker-launch[542]: Looking up NSS user entry for 'systemd-timesync'... machine # [ 8.911179] systemd[1]: Stopping Host and Network Name Lookups... machine # [ 8.915113] dbus-broker-launch[542]: NSS returned no entry for 'systemd-timesync' machine # [ 8.916157] dbus-broker-launch[542]: Invalid user-name in /nix/store/v39rq276k9qklxyh9cg2chgxbygw2fdc-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" machine # [ 8.918202] systemd[1]: Stopped target User and Group Name Lookups. sshClient # [ 8.834629] systemd[1]: Finished linger-users.service. machine # [ 8.925171] systemd[1]: Stopping User and Group Name Lookups... machine # [ 8.926277] nsncd[597]: Sep 12 02:52:34.660 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" machine # [ 8.931738] network-addresses-eth1-start[627]: adding address 192.168.1.1/24... done machine # [ 8.934249] network-addresses-eth1-start[627]: adding address 2001:db8:1::1/64... done sshClient # [ 8.850241] systemd-logind[535]: Watching system buttons on /dev/input/event2 (Power Button) machine # [ 8.935596] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... machine # [ 8.940483] systemd[1]: nscd.service: Deactivated successfully. machine # [ 9.086953] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 machine # [ 8.945893] systemd[1]: Stopped Name Service Cache Daemon (nsncd). machine # [ 9.091234] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 machine # [ 8.951438] systemd[1]: Starting Name Service Cache Daemon (nsncd)... machine # [ 8.953379] systemd[1]: Started D-Bus System Message Bus. machine # [ 8.958715] dbus-broker-launch[542]: Ready sshClient # [ 8.880529] systemd[1]: Finished Permit User Sessions. machine # [ 8.965072] systemd[1]: Started Name Service Cache Daemon (nsncd). machine # [ 8.965880] systemd[1]: Reached target Host and Network Name Lookups. machine # [ 8.966752] systemd[1]: Reached target User and Group Name Lookups. machine # [ 8.970821] systemd[1]: Started Home Area Manager. machine # [ 8.971624] systemd[1]: Finished Home Area Activation. machine # [ 8.972722] systemd[1]: Starting First Boot Home Area Wizard... sshClient # [ 8.890175] systemd[1]: Started Getty on tty1. machine # [ 8.975064] systemd[1]: Finished resolvconf update. sshClient # [ 8.892647] systemd[1]: Reached target Login Prompts. machine # [ 8.977471] systemd[1]: Reached target Preparation for Network. machine # [ 8.978817] systemd[1]: Starting DHCP Client... machine # [ 8.981538] systemd[1]: Starting Address configuration of eth1... machine # [ 8.983991] systemd[1]: Starting Extra networking commands.... machine # [ 8.987136] systemd[1]: Finished Address configuration of eth1. sshClient # [ 8.902855] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. machine # [ 8.989361] systemd-logind[547]: New seat seat0. machine # [ 8.991843] systemd[1]: Started User Login Management. machine # [ 9.135238] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic machine # [ 8.994056] systemd[1]: Starting linger-users.service... sshClient # [ 8.910162] systemd[1]: Finished Save Transient machine-id to Disk. machine # [ 8.997461] dhcpcd[634]: dhcpcd-10.3.2 starting machine # [ 9.013922] dhcpcd[692]: dev: loaded udev sshClient # [ 8.932755] systemd-logind[535]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) machine # [ 9.167400] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 machine # [ 9.034920] systemd[1]: Created slice Slice /system/systemd-mute-console. machine # [ 9.043697] systemd[1]: Started Console Output Muting Service (PID 623/UID 0). machine # [ 9.049565] systemd[1]: Finished Extra networking commands.. machine # [ 9.196210] 8021q: 802.1Q VLAN Support v1.8 machine # [ 9.206598] 8021q: adding VLAN 0 to HW filter on device eth1 machine # [ 9.065953] systemd[1]: Reached target Network. machine # [ 9.069921] systemd[1]: linger-users.service: Deactivated successfully. machine # [ 9.072245] systemd[1]: Finished linger-users.service. sshClient # [ 9.075459] cfg80211: Loading compiled-in X.509 certificates for regulatory database sshClient # [ 9.103962] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' sshClient # [ 9.104077] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' sshClient # [ 9.105760] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 sshClient # [ 9.105765] cfg80211: failed to load regulatory.db sshClient # [ 9.141459] Console: switching to colour frame buffer device 160x50 sshClient # [ 9.144335] ppdev: user-space parallel port driver sshClient # [ 9.163629] 8021q: adding VLAN 0 to HW filter on device eth0 sshClient # [ 9.188544] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) machine # [ 9.161315] sshd-keygen-start[551]: Generating public/private rsa key pair. machine # [ 9.164172] sshd-keygen-start[551]: Your identification has been saved in /etc/ssh/ssh_host_rsa_key sshClient # [ 9.196835] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) machine # [ 9.165314] sshd-keygen-start[551]: Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub machine # [ 9.166405] sshd-keygen-start[551]: The key fingerprint is: sshClient # [ 9.221571] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device sshClient # [ 9.024276] dhcpcd[671]: eth0: waiting for carrier machine # [ 9.167139] sshd-keygen-start[551]: SHA256:wiw5ZFzUNI7WhfWW0To5iy1J5muJIAAqK5/vu2m1hWA root@machine sshClient # [ 9.083607] dhcpcd[671]: eth0: carrier acquired machine # [ 9.168214] sshd-keygen-start[551]: The key's randomart image is: machine # [ 9.169024] sshd-keygen-start[551]: +---[RSA 4096]----+ sshClient # [ 9.084336] systemd-logind[535]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) machine # [ 9.169658] sshd-keygen-start[551]: | .ooooo .. | machine # [ 9.170362] sshd-keygen-start[551]: |. . . +oo . o. | sshClient # [ 9.085774] dhcpcd[671]: DUID 00:01:00:01:32:37:7a:f2:52:54:00:12:34:56 machine # [ 9.171394] sshd-keygen-start[551]: |.. + o o +o | sshClient # [ 9.087193] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. machine # [ 9.172446] sshd-keygen-start[551]: |o .oE= o.= | sshClient # [ 9.088496] dhcpcd[671]: eth0: IAID 00:12:34:56 sshClient # [ 9.089460] dhcpcd[671]: eth0: adding address fe80::5054:ff:fe12:3456 machine # [ 9.175597] sshd-keygen-start[551]: |.. o+.+.S+ + + | machine # [ 9.176330] sshd-keygen-start[551]: |o .o+.. = o | sshClient # [ 9.091765] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. machine # [ 9.176999] sshd-keygen-start[551]: |.. . o + . + | machine # [ 9.177661] sshd-keygen-start[551]: | o ... . + | machine # [ 9.178368] sshd-keygen-start[551]: | +*o . | sshClient # [ 9.093959] systemd[1]: Stopped Virtual Console Setup. machine # [ 9.179092] sshd-keygen-start[551]: +----[SHA256]-----+ sshClient # [ 9.099612] systemd[1]: Starting Virtual Console Setup... sshClient # [ 9.115081] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. sshClient # [ 9.117620] systemd[1]: Stopped Virtual Console Setup. sshClient # [ 9.126155] systemd[1]: Starting Virtual Console Setup... machine # [ 9.217375] systemd[1]: Starting Virtual Console Setup... machine # [ 9.263788] sshd-keygen-start[707]: Generating public/private ed25519 key pair. machine # [ 9.264795] sshd-keygen-start[707]: Your identification has been saved in /etc/ssh/ssh_host_ed25519_key machine # [ 9.265920] sshd-keygen-start[707]: Your public key has been saved in /etc/ssh/ssh_host_ed25519_key.pub machine # [ 9.267225] sshd-keygen-start[707]: The key fingerprint is: machine # [ 9.268545] sshd-keygen-start[707]: SHA256:aWSvSxmHEK0kZ/HeUzD9zlsMwfMC/PlcMyKRJzLOswg root@machine machine # [ 9.270513] sshd-keygen-start[707]: The key's randomart image is: machine # [ 9.271429] sshd-keygen-start[707]: +--[ED25519 256]--+ machine # [ 9.272188] sshd-keygen-start[707]: | oo oo.. | machine # [ 9.274089] sshd-keygen-start[707]: | . +o.o *+.+ | machine # [ 9.274799] sshd-keygen-start[707]: | =..* o =+ = | sshClient # [ 9.330138] kvm_amd: TSC scaling supported sshClient # [ 9.330797] kvm_amd: Nested Virtualization enabled sshClient # [ 9.331345] kvm_amd: Nested Paging enabled machine # [ 9.276437] sshd-keygen-start[707]: | E.= O o .*oo| sshClient # [ 9.332411] kvm_amd: LBR virtualization supported sshClient # [ 9.333068] kvm_amd: Virtual VMLOAD VMSAVE supported machine # [ 9.277746] sshd-keygen-start[707]: | . S B .o.*+| sshClient # [ 9.333587] kvm_amd: Virtual GIF supported sshClient # [ 9.334175] kvm_amd: Virtual NMI enabled machine # [ 9.279561] sshd-keygen-start[707]: | o * . o =| machine # [ 9.280392] sshd-keygen-start[707]: | + o | machine # [ 9.283141] sshd-keygen-start[707]: | . . . | machine # [ 9.283791] sshd-keygen-start[707]: | . | machine # [ 9.284474] sshd-keygen-start[707]: +----[SHA256]-----+ machine # [ 9.285224] systemd[1]: sshd-keygen.service: Deactivated successfully. machine # [ 9.291283] systemd[1]: Finished SSH Host Keys Generation. machine # [ 9.292066] systemd-logind[547]: Watching system buttons on /dev/input/event2 (Power Button) machine # [ 9.298306] systemd[1]: Starting SSH Daemon... sshClient # [ 9.373304] EDAC MC: Ver: 3.0.0 machine # [ 9.329300] systemd-logind[547]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) machine # [ 9.366768] sshd[709]: Server listening on 0.0.0.0 port 22. machine # [ 9.367906] sshd[709]: Server listening on :: port 22. machine # [ 9.369900] systemd[1]: Started SSH Daemon. machine # [ 9.385351] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. machine # [ 9.387424] systemd[1]: Stopped Virtual Console Setup. machine # [ 9.401487] systemd[1]: Starting Virtual Console Setup... machine # [ 9.428504] dhcpcd[692]: eth0: waiting for carrier machine # [ 9.430978] dhcpcd[692]: libudev: received NULL device machine # [ 9.432829] dhcpcd[692]: libudev: received NULL device machine # [ 9.433725] dhcpcd[692]: eth0: carrier acquired machine # [ 9.450346] dhcpcd[692]: DUID 00:01:00:01:32:37:7a:f3:52:54:00:12:34:56 machine # [ 9.451925] dhcpcd[692]: eth0: IAID 00:12:34:56 machine # [ 9.452987] dhcpcd[692]: eth0: adding address fe80::5054:ff:fe12:3456 machine: (finished: waiting for unit systemd-homed.service, in 10.12 seconds) machine: waiting for Please enter user name to create to appear on tty 1 machine # [ 9.500207] systemd-logind[547]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) machine # [ 9.530635] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. sshClient # [ 9.495151] systemd-vconsole-setup[709]: Configuration of first virtual console was skipped, ignoring remaining ones. machine: (finished: waiting for Please enter user name to create to appear on tty 1, in 0.08 seconds) machine: sending keys 'test-homed-user\n' sshClient # [ 9.498743] systemd[1]: Finished Virtual Console Setup. machine # [ 9.591794] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. machine # [ 9.594175] systemd[1]: Stopped Virtual Console Setup. machine # [ 9.608659] systemd[1]: Starting Virtual Console Setup... machine: (finished: sending keys 'test-homed-user\n', in 0.17 seconds) machine: waiting for Please enter new password for user test-homed-user: to appear on tty 1 sshClient # [ 9.768386] dhcpcd[671]: eth0: soliciting a DHCP lease sshClient # [ 9.927247] NET: Registered PF_PACKET protocol family sshClient # [ 9.791501] dhcpcd[671]: eth0: offered 10.0.2.15 from 10.0.2.2 sshClient # [ 9.793165] dhcpcd[671]: eth0: probing address 10.0.2.15/24 machine # [ 9.949622] systemd-vconsole-setup[740]: Configuration of first virtual console was skipped, ignoring remaining ones. machine # [ 9.953193] systemd[1]: Finished Virtual Console Setup. machine # [ 10.255815] dhcpcd[692]: eth0: soliciting a DHCP lease sshClient # [ 10.196605] dhcpcd[671]: eth0: soliciting an IPv6 router sshClient # [ 10.199743] dhcpcd[671]: eth0: Router Advertisement from fe80::2 sshClient # [ 10.202355] dhcpcd[671]: eth0: adding address fec0::5054:ff:fe12:3456/64 sshClient # [ 10.204618] dhcpcd[671]: eth0: adding route to fec0::/64 machine # [ 10.289947] dhcpcd[692]: eth0: offered 10.0.2.15 from 10.0.2.2 sshClient # [ 10.206838] dhcpcd[671]: eth0: adding default route via fe80::2 machine # [ 10.294349] dhcpcd[692]: eth0: probing address 10.0.2.15/24 machine: (finished: waiting for Please enter new password for user test-homed-user: to appear on tty 1, in 1.12 seconds) machine: sending keys 'foobarfoo\n' machine: (finished: sending keys 'foobarfoo\n', in 0.10 seconds) machine: waiting for (repeat) to appear on tty 1 machine # [ 11.879408] dhcpcd[692]: eth0: soliciting an IPv6 router machine # [ 11.882298] dhcpcd[692]: eth0: Router Advertisement from fe80::2 machine # [ 11.884592] dhcpcd[692]: eth0: adding address fec0::5054:ff:fe12:3456/64 machine # [ 11.886779] dhcpcd[692]: eth0: adding route to fec0::/64 machine # [ 11.888535] dhcpcd[692]: eth0: adding default route via fe80::2 machine: (finished: waiting for (repeat) to appear on tty 1, in 1.14 seconds) machine: sending keys 'foobarfoo\n' machine: (finished: sending keys 'foobarfoo\n', in 0.10 seconds) machine: waiting for unit systemd-homed-firstboot.service sshClient # [ 15.060920] dhcpcd[671]: eth0: leased 10.0.2.15 for 86400 seconds sshClient # [ 15.061797] dhcpcd[671]: eth0: adding route to 10.0.2.0/24 sshClient # [ 15.062519] dhcpcd[671]: eth0: adding default route via 10.0.2.2 sshClient # [ 15.148146] systemd[1]: Started DHCP Client. sshClient # [ 15.150168] systemd[1]: Reached target Multi-User System. sshClient # [ 15.151175] systemd[1]: Startup finished in 825ms (kernel) + 3.921s (initrd) + 10.404s (userspace) = 15.151s. machine # [ 15.263435] dhcpcd[692]: eth0: leased 10.0.2.15 for 86400 seconds machine # [ 15.265665] dhcpcd[692]: eth0: adding route to 10.0.2.0/24 machine # [ 15.267683] dhcpcd[692]: eth0: adding default route via 10.0.2.2 machine # [ 15.374890] systemd[1]: Started DHCP Client. machine # [ 22.360683] systemd-homed[520]: Generating key pair for signing local user identity records. machine # [ 22.365073] systemd-homed[520]: Successfully created Ed25519 key pair. machine # [ 22.386589] systemd-homed[520]: test-homed-user: changing state absent → creating machine # [ 22.475319] systemd-homework[874]: Using automatic default storage of 'luks'. machine # [ 22.481865] systemd-homework[874]: Sizing home to 83% of available disk space, which is 743M. machine # [ 22.483717] systemd-homework[874]: Allocating image file completed. machine # [ 22.505682] systemd-homework[874]: Writing of partition table completed. machine # [ 22.507711] systemd-homework[874]: Setting up loopback device /dev/loop0 completed. machine # [ 23.878916] systemd-homework[874]: LUKS formatting completed. machine # [ 25.548900] systemd-homework[874]: Writing password to LUKS keyslot 0 completed. machine # [ 25.781142] systemd-homework[874]: LUKS activation by volume key succeeded. machine # [ 25.798827] systemd-homework[874]: Writing user record as LUKS token completed. machine # [ 25.799852] systemd-homework[874]: Setting up LUKS device /dev/mapper/home-test-homed-user completed. machine # [ 25.801044] systemd-homework[874]: Formatting /dev/mapper/home-test-homed-user as btrfs machine # [ 26.188136] systemd-homework[874]: /dev/mapper/home-test-homed-user successfully formatted as btrfs (label "test-homed-user", uuid 4f43b654-1290-46f1-8dca-dec692ce765c) machine # [ 26.189979] systemd-homework[874]: Formatting file system completed. machine # [ 26.192525] systemd[1]: proc-905-mounts.mount: Deactivated successfully. machine # [ 26.239780] systemd-homework[874]: Mounting file system completed. machine # [ 26.242057] systemd-homework[874]: Skeleton directory /etc/skel missing, ignoring. machine # [ 26.243193] systemd-homework[874]: Wrote embedded .identity file. machine # [ 26.244256] systemd-homework[874]: Replaced embedded blob dir with contents of system blob dir. machine # [ 26.245642] systemd-homework[874]: Recursive changing of ownership completed. machine # [ 26.246808] systemd-homework[874]: Changed top-level directory access mode to 0700. machine # [ 26.253210] systemd-homework[874]: Synchronized disk. machine # [ 26.254659] systemd-homework[874]: Discarded unused 651.8M. machine # [ 26.266268] systemd-homed[520]: block device /sys/devices/virtual/block/dm-0 has been removed. machine # [ 26.272396] systemd-homed[520]: block device /sys/devices/virtual/block/dm-0 has been removed. machine # [ 26.288284] systemd-homework[874]: Moved image file into place. machine # [ 26.289390] systemd-homework[874]: Creation completed. machine # [ 26.291943] systemd-homework[874]: Image size is 743M, file system size is 725M, file system payload size is 725M, file system free is 718.9M. machine # [ 26.293470] systemd-homed[520]: block device /sys/devices/virtual/block/loop0 has been removed. machine # [ 26.301355] systemd-homed[520]: test-homed-user: changing state creating → inactive machine # [ 26.307137] systemd[1]: systemd-mute-console@0-1-623_624-0.service: Deactivated successfully. machine # [ 26.310161] systemd[1]: Finished First Boot Home Area Wizard. machine # [ 26.314408] systemd[1]: Reached target First Boot Complete. machine # [ 26.317917] systemd[1]: Starting Save Transient machine-id to Disk... machine # [ 26.321309] systemd[1]: Starting Permit User Sessions... machine # [ 26.353801] systemd[1]: Finished Permit User Sessions. machine # [ 26.358236] systemd[1]: Started Getty on tty1. machine # [ 26.359308] systemd[1]: Reached target Login Prompts. machine # [ 26.360919] systemd[1]: Reached target Multi-User System. machine # [ 26.369936] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. machine # [ 26.372362] systemd[1]: Finished Save Transient machine-id to Disk. machine # [ 26.374523] systemd[1]: Startup finished in 826ms (kernel) + 3.972s (initrd) + 21.575s (userspace) = 26.374s. machine: (finished: waiting for unit systemd-homed-firstboot.service, in 14.92 seconds) (finished: subtest: create systemd-homed user on first boot prompt, in 27.76 seconds) machine: must succeed: homectl update test-homed-user --offline -G wheel machine # [ 27.166472] systemd-homed[520]: test-homed-user: changing state inactive → updating machine # [ 27.171364] systemd-homework[951]: Offline update requested. Not touching embedded records. machine # [ 27.173376] systemd-homed[520]: Home test-homed-user is signed exclusively by our key, accepting. machine # [ 27.178594] systemd-homed[520]: test-homed-user: changing state updating → inactive machine: (finished: must succeed: homectl update test-homed-user --offline -G wheel, in 0.04 seconds) subtest: login as homed user machine: waiting for login: to appear on tty 1 machine: (finished: waiting for login: to appear on tty 1, in 0.04 seconds) machine: sending keys 'test-homed-user\n' machine: (finished: sending keys 'test-homed-user\n', in 0.17 seconds) machine: waiting for Password: to appear on tty 1 machine # [ 27.582793] systemd-homed[520]: test-homed-user: changing state inactive → activating-for-acquire machine # [ 27.587584] systemd-homework[966]: None of the supplied plaintext passwords unlock the user record's hashed passwords. machine # [ 27.592588] systemd-homed[520]: Activation failed: Password for home test-homed-user is incorrect or not sufficient for authentication. machine # [ 27.594526] systemd-homed[520]: test-homed-user: changing state activating-for-acquire → inactive machine # [ 27.595644] systemd-homed[520]: Got notification that all sessions of user test-homed-user ended, deactivating automatically. machine # [ 27.597044] systemd-homed[520]: Home test-homed-user already deactivated, no automatic deactivation needed. machine: (finished: waiting for Password: to appear on tty 1, in 1.13 seconds) machine: sending keys 'foobarfoo\n' machine: (finished: sending keys 'foobarfoo\n', in 0.11 seconds) machine: waiting for success: pgrep -u test-homed-user -t tty1 bash machine # [ 28.701857] systemd-homed[520]: test-homed-user: changing state inactive → activating-for-acquire machine # [ 28.732548] systemd-homework[978]: Provided password unlocks user record. machine # [ 28.740401] systemd-homework[978]: Successfully locked image file '/home/test-homed-user.home'. machine # [ 28.745937] systemd-homework[978]: Allocated additional 651.8M. machine # [ 28.891569] loop1: detected capacity change from 0 to 1517568 machine # [ 28.750023] systemd-homework[978]: Setting up loopback device /dev/loop1 completed. machine # [ 29.574233] systemd-homework[978]: Setting up LUKS device /dev/mapper/home-test-homed-user completed. machine # [ 29.599265] systemd-homework[978]: Provided password unlocks user record. machine # [ 29.603741] systemd-homework[978]: Probing file system completed (found btrfs). machine # [ 29.608624] systemd-homework[978]: No fsck for file system btrfs installed, ignoring. machine # [ 29.753748] BTRFS: device label test-homed-user devid 1 transid 9 /dev/mapper/home-test-homed-user (254:0) scanned by systemd-homewor (978) machine # [ 29.756209] BTRFS info (device dm-0): first mount of filesystem 4f43b654-1290-46f1-8dca-dec692ce765c machine # [ 29.757404] BTRFS info (device dm-0): using crc32c (crc32c-lib) checksum algorithm machine # [ 29.760882] BTRFS info (device dm-0): enabling free space tree machine # [ 29.761464] BTRFS info (device dm-0): use zstd compression, level 1 machine # [ 29.619813] systemd-homework[978]: Mounting file system completed. machine # [ 29.621664] systemd-homework[978]: Discovered used loopback device /dev/loop1. machine # [ 29.622648] systemd-homework[978]: offset = 1048576, size = 776994816, image = 779091968 machine # [ 29.630631] systemd-homework[978]: Ready to resize image size 743M → 896M, partition size 741M → 894M, file system size 725M → 878M. machine # [ 29.632421] systemd-homework[978]: Growing of image file from 743M to 896M completed. machine # [ 29.778527] loop1: detected capacity change from 1517568 to 1830912 machine # [ 29.637639] systemd-homework[978]: Refreshing loop device size completed. machine # [ 29.651734] systemd-homework[978]: Growing of partition completed. machine # [ 29.819012] async_tx: api initialized (async) machine # [ 29.718468] systemd-homework[978]: LUKS device growing completed. machine # [ 29.867295] BTRFS info (device dm-0): resize device /dev/mapper/home-test-homed-user (devid 1) from 760217600 to 920649728 machine # [ 29.727063] systemd-homework[978]: File system resizing from 725M to 878M completed. machine # [ 29.728212] systemd-homework[978]: Synchronized disk. machine # [ 29.730051] systemd-homework[978]: Synchronized disk. machine # [ 29.730697] systemd-homework[978]: Resizing completed. machine # [ 29.731418] systemd-homework[978]: Image size is 896M, file system size is 878M, file system payload size is 878M, file system free is 871.9M. machine # [ 29.734118] systemd-homework[978]: Read embedded .identity file. machine # [ 29.761425] systemd-homework[978]: Provided password unlocks user record. machine # [ 29.762433] systemd-homework[978]: Reconciling header user identity completed (host version was newer). machine # [ 29.763654] systemd-homework[978]: Reconciling embedded user identity completed (host version was newer). machine # [ 29.779069] systemd-homework[978]: Wrote LUKS header user record. machine # [ 29.780330] systemd-homework[978]: Wrote embedded .identity file. machine # [ 29.781313] systemd-homework[978]: Replaced embedded blob dir with contents of system blob dir. machine # [ 29.782851] systemd-homework[978]: Recursive changing of ownership not necessary, skipped. machine # [ 29.787077] systemd-homework[978]: Synchronized disk. machine # [ 29.789194] systemd-homework[978]: Moving to final mount point /home/test-homed-user completed. machine # [ 29.806975] systemd-homework[978]: Activation completed. machine # [ 29.808150] systemd-homework[978]: Image size is 894M, file system size is 878M, file system payload size is 878M, file system free is 871.9M. machine # [ 29.818090] systemd-homed[520]: Home test-homed-user is signed exclusively by our key, accepting. machine # [ 29.824466] login[942]: pam_systemd_home(login:auth): Home for user test-homed-user successfully acquired. machine # [ 29.826483] systemd-homed[520]: test-homed-user: changing state activating-for-acquire → active machine # [ 29.833872] systemd-homed[520]: test-homed-user: changing state active → resizing-while-active machine # [ 29.846031] systemd-homework[1022]: Successfully acquired home volume key from kernel keyring. machine # [ 29.848194] systemd-homework[1022]: LUKS volume key from keyring unlocks user record. machine # [ 29.908204] login[942]: pam_unix(login:session): session opened for user test-homed-user(uid=60388) by LOGIN(uid=0) machine # [ 29.931212] systemd-homework[1022]: Discovered used LUKS device /dev/mapper/home-test-homed-user, and validated password. machine # [ 29.970372] systemd[1]: Created slice Slice /user/60388. machine # [ 29.972172] systemd[1]: Starting User Runtime Directory /run/user/60388... machine # [ 29.989180] systemd-logind[547]: New session '1' of user 'test-homed-user' with class 'user' and type 'tty'. machine # [ 30.022537] systemd[1]: Finished User Runtime Directory /run/user/60388. machine # [ 30.027744] systemd[1]: Starting User Manager for UID 60388... machine # [ 30.070072] (systemd)[1027]: pam_systemd_home(systemd-user:account): Home for user test-homed-user successfully acquired. machine # [ 30.127159] (systemd)[1027]: pam_unix(systemd-user:session): session opened for user test-homed-user(uid=60388) by (uid=0) machine # [ 30.132955] systemd-logind[547]: New session '2' of user 'test-homed-user' with class 'manager' and type 'unspecified'. machine # [ 30.177443] systemd[1027]: Failed to adjust io pressure threshold, ignoring: Device or resource busy machine # [ 30.230628] systemd-homework[1022]: Successfully re-activated LUKS device. machine # [ 30.233828] systemd-homework[1022]: LUKS volume key from keyring unlocks user record. machine # [ 30.236038] systemd-homework[1022]: Discovered used loopback device /dev/loop1. machine # [ 30.237124] systemd-homework[1022]: Read embedded .identity file. machine # [ 30.237895] systemd-homework[1022]: LUKS volume key from keyring unlocks user record. machine # [ 30.238879] systemd-homework[1022]: Reconciling header user identity completed (host version was newer). machine # [ 30.240155] systemd-homework[1022]: Reconciling embedded user identity completed (host version was newer). machine # [ 30.241702] systemd-homework[1022]: offset = 1048576, size = 937426944, image = 939524096 machine # [ 30.255081] systemd-homework[1022]: Ready to resize image size 896M → 764M, partition size 894M → 762M, file system size 878M → 746M. machine # [ 30.257146] systemd-homework[1022]: Wrote embedded .identity file. machine # [ 30.258752] systemd-homework[1022]: Replaced embedded blob dir with contents of system blob dir. machine # [ 30.260139] systemd-homework[1022]: Backing file is fully allocated already. machine # [ 30.407122] BTRFS info (device dm-0): resize device /dev/mapper/home-test-homed-user (devid 1) from 920649728 to 782237696 machine # [ 30.265962] systemd-homework[1022]: File system resizing from 878M to 746M completed. machine # [ 30.268084] systemd-homework[1022]: Synchronized disk. machine # [ 30.310661] systemd-homework[1022]: LUKS device shrinking completed. machine # [ 30.455698] loop1: detected capacity change from 1830912 to 1560576 machine # [ 30.317410] systemd-homework[1022]: Refreshing loop device size completed. machine # [ 30.320217] systemd-homework[1022]: Shrinking of image file completed. machine # [ 30.347904] systemd-homework[1022]: Shrinking of partition completed. machine # [ 30.370844] systemd-homework[1022]: Wrote LUKS header user record. machine # [ 30.372179] systemd-homework[1022]: Synchronized disk. machine # [ 30.374147] systemd-homework[1022]: Resizing completed. machine # [ 30.374975] systemd-homework[1022]: Image size is 764M, file system size is 746M, file system payload size is 746M, file system free is 739.9M. machine # [ 30.384656] systemd-homed[520]: Home test-homed-user is signed exclusively by our key, accepting. machine # [ 30.391946] systemd-homed[520]: test-homed-user: changing state resizing-while-active → active machine # [ 30.394655] systemd-homed[520]: Rebalancing complete. machine # [ 30.429870] systemd[1027]: Queued start job for default target Main User Target. machine # [ 30.432700] systemd[1027]: Failed to adjust io pressure threshold, ignoring: Device or resource busy machine # [ 30.440090] systemd[1027]: Created slice User Application Slice. machine # [ 30.441072] systemd[1027]: Started Daily Cleanup of User's Temporary Directories. machine # [ 30.442140] systemd[1027]: Reached target Paths. machine # [ 30.442931] systemd[1027]: Reached target Timers. machine # [ 30.445951] systemd[1027]: Starting D-Bus User Message Bus Socket... machine # [ 30.448829] systemd[1027]: Starting Create User Files and Directories... machine # [ 30.480299] systemd[1027]: Finished Create User Files and Directories. machine # [ 30.516774] systemd[1027]: Listening on D-Bus User Message Bus Socket. machine # [ 30.519057] systemd[1027]: Reached target Sockets. machine # [ 30.519748] systemd[1027]: Reached target Basic System. machine # [ 30.521949] systemd[1]: Started User Manager for UID 60388. machine # [ 30.523706] systemd[1]: Started Session 1 of User test-homed-user. machine # [ 30.525774] systemd[1027]: Starting Run user-specific NixOS activation... machine # [ 30.570089] systemd[1027]: Finished Run user-specific NixOS activation. machine # [ 30.571065] systemd[1027]: Reached target Main User Target. machine # [ 30.571824] systemd[1027]: Startup finished in 406ms. machine: (finished: waiting for success: pgrep -u test-homed-user -t tty1 bash, in 2.21 seconds) machine: sending keys 'whoami > /tmp/2\n' machine: (finished: sending keys 'whoami > /tmp/2\n', in 0.17 seconds) machine: waiting for file '/tmp/2' machine: (finished: waiting for file '/tmp/2', in 1.07 seconds) machine: must succeed: cat /tmp/2 machine: (finished: must succeed: cat /tmp/2, in 0.03 seconds) (finished: subtest: login as homed user, in 4.92 seconds) subtest: login as regular user sshClient: waiting for login: to appear on tty 1 sshClient: waiting for the VM to finish booting sshClient: Guest shell says: b'Spawning backdoor root shell...\n' sshClient: connected to guest root shell sshClient: (connecting took 0.00 seconds) sshClient: (finished: waiting for the VM to finish booting, in 0.00 seconds) sshClient: (finished: waiting for login: to appear on tty 1, in 0.06 seconds) sshClient: sending keys 'test-normal-user\n' sshClient: (finished: sending keys 'test-normal-user\n', in 0.18 seconds) sshClient: waiting for Password: to appear on tty 1 sshClient: (finished: waiting for Password: to appear on tty 1, in 1.12 seconds) sshClient: sending keys 'foobarfoo\n' sshClient: (finished: sending keys 'foobarfoo\n', in 0.10 seconds) sshClient: waiting for success: pgrep -u test-normal-user bash sshClient # [ 33.589778] login[691]: pam_unix(login:session): session opened for user test-normal-user(uid=1000) by LOGIN(uid=0) sshClient # [ 33.680261] systemd[1]: Created slice Slice /user/1000. sshClient # [ 33.683277] systemd[1]: Starting User Runtime Directory /run/user/1000... sshClient # [ 33.693513] systemd-logind[535]: New session '1' of user 'test-normal-user' with class 'user' and type 'tty'. sshClient # [ 33.724349] systemd[1]: Finished User Runtime Directory /run/user/1000. sshClient # [ 33.735857] systemd[1]: Starting User Manager for UID 1000... sshClient # [ 33.768814] (systemd)[816]: pam_unix(systemd-user:session): session opened for user test-normal-user(uid=1000) by (uid=0) sshClient # [ 33.774617] systemd-logind[535]: New session '2' of user 'test-normal-user' with class 'manager' and type 'unspecified'. sshClient # [ 33.804456] systemd[816]: Failed to adjust io pressure threshold, ignoring: Device or resource busy sshClient # [ 33.945372] systemd[816]: Queued start job for default target Main User Target. sshClient # [ 33.947830] systemd[816]: Failed to adjust io pressure threshold, ignoring: Device or resource busy sshClient # [ 33.950066] systemd[816]: Created slice User Application Slice. sshClient # [ 33.950952] systemd[816]: Started Daily Cleanup of User's Temporary Directories. sshClient # [ 33.951974] systemd[816]: Reached target Paths. sshClient # [ 33.953275] systemd[816]: Reached target Timers. sshClient # [ 33.955942] systemd[816]: Starting D-Bus User Message Bus Socket... sshClient # [ 33.958386] systemd[816]: Starting Create User Files and Directories... sshClient # [ 33.991271] systemd[816]: Finished Create User Files and Directories. sshClient # [ 34.019549] systemd[816]: Listening on D-Bus User Message Bus Socket. sshClient # [ 34.020449] systemd[816]: Reached target Sockets. sshClient # [ 34.021099] systemd[816]: Reached target Basic System. sshClient # [ 34.021770] systemd[1]: Started User Manager for UID 1000. sshClient # [ 34.025937] systemd[1]: Started Session 1 of User test-normal-user. sshClient # [ 34.027771] systemd[816]: Starting Run user-specific NixOS activation... sshClient # [ 34.075556] systemd[816]: Finished Run user-specific NixOS activation. sshClient # [ 34.077133] systemd[816]: Reached target Main User Target. sshClient # [ 34.079591] systemd[816]: Startup finished in 286ms. sshClient: (finished: waiting for success: pgrep -u test-normal-user bash, in 1.14 seconds) sshClient: sending keys 'whoami > /tmp/1\n' sshClient: (finished: sending keys 'whoami > /tmp/1\n', in 0.17 seconds) sshClient: waiting for file '/tmp/1' sshClient: (finished: waiting for file '/tmp/1', in 1.05 seconds) sshClient: must succeed: cat /tmp/1 sshClient: (finished: must succeed: cat /tmp/1, in 0.02 seconds) (finished: subtest: login as regular user, in 3.83 seconds) subtest: add homed ssh authorized key sshClient: sending keys 'ssh-keygen -t ed25519 -f /tmp/id_ed25519 -N ""\n' sshClient: (finished: sending keys 'ssh-keygen -t ed25519 -f /tmp/id_ed25519 -N ""\n', in 0.48 seconds) sshClient: waiting for file '/tmp/id_ed25519.pub' sshClient: (finished: waiting for file '/tmp/id_ed25519.pub', in 1.05 seconds) sshClient: must succeed: cat /tmp/id_ed25519.pub sshClient: (finished: must succeed: cat /tmp/id_ed25519.pub, in 0.03 seconds) machine: must succeed: homectl update test-homed-user --offline --ssh-authorized-keys 'ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE2Zga8Z+e8I/RNh1qHJ+o0WO1BOAh1R8X5hDypkiT7X test-normal-user@sshClient' machine # [ 37.556839] systemd-homed[520]: test-homed-user: changing state active → updating-while-active machine # [ 37.567307] systemd-homework[1075]: Offline update requested. Not touching embedded records. machine # [ 37.577290] systemd-homed[520]: test-homed-user: changing state updating-while-active → active machine: (finished: must succeed: homectl update test-homed-user --offline --ssh-authorized-keys 'ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIE2Zga8Z+e8I/RNh1qHJ+o0WO1BOAh1R8X5hDypkiT7X test-normal-user@sshClient', in 0.08 seconds) machine: must succeed: userdbctl ssh-authorized-keys test-homed-user | grep ed25519 machine: (finished: must succeed: userdbctl ssh-authorized-keys test-homed-user | grep ed25519, in 0.03 seconds) (finished: subtest: add homed ssh authorized key, in 1.68 seconds) subtest: change homed user password machine: sending keys 'passwd; echo $? > /tmp/3\n' machine: (finished: sending keys 'passwd; echo $? > /tmp/3\n', in 0.26 seconds) machine: waiting for New password: to appear on tty 1 machine: (finished: waiting for New password: to appear on tty 1, in 1.14 seconds) machine: sending keys 'barfoobar\n' machine: (finished: sending keys 'barfoobar\n', in 0.10 seconds) machine: waiting for Retype new password: to appear on tty 1 machine: (finished: waiting for Retype new password: to appear on tty 1, in 1.13 seconds) machine: sending keys 'barfoobar\n' machine: (finished: sending keys 'barfoobar\n', in 0.10 seconds) ??? Warning (UserWarning): sleep(): The 'secs' argument is deprecated. Use 'duration' instead. File "/nix/store/3gycnalwgpix76jjky7ljgh88gwgdb0l-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 573 machine: must succeed: sleep 4.0 machine # [ 40.471658] systemd-homed[520]: test-homed-user: changing state active → passwd-while-active machine # [ 41.211455] systemd-homework[1115]: No valid password for LUKS superblock. machine # [ 43.485209] systemd-homed[520]: Change operation failed: Password for home test-homed-user is incorrect or not sufficient for authentication. machine # [ 43.489878] systemd-homed[520]: test-homed-user: changing state passwd-while-active → active machine: (finished: must succeed: sleep 4.0, in 4.04 seconds) machine: sending keys 'foobarfoo\n' machine: (finished: sending keys 'foobarfoo\n', in 0.10 seconds) machine: waiting for file '/tmp/3' machine # [ 44.591179] systemd-homed[520]: test-homed-user: changing state active → passwd-while-active machine # [ 45.921849] systemd-homework[1121]: Discovered used LUKS device /dev/mapper/home-test-homed-user, and validated password. machine # [ 46.047943] systemd-homework[1121]: Successfully re-activated LUKS device. machine # [ 46.086886] systemd-homework[1121]: Provided password unlocks user record. machine # [ 46.088268] systemd-homework[1121]: Discovered used loopback device /dev/loop1. machine # [ 46.089305] systemd-homework[1121]: Read embedded .identity file. machine # [ 46.126076] systemd-homework[1121]: Provided password unlocks user record. machine # [ 46.127036] systemd-homework[1121]: Reconciling header user identity completed (host version was newer). machine # [ 46.128171] systemd-homework[1121]: Reconciling embedded user identity completed (host version was newer). machine # [ 49.310795] systemd-homework[1121]: Added LUKS key slot 1. machine # [ 49.344112] systemd-homework[1121]: Destroyed LUKS key slot 0. machine # [ 49.355328] systemd-homework[1121]: Wrote LUKS header user record. machine # [ 49.356497] systemd-homework[1121]: Wrote embedded .identity file. machine # [ 49.357489] systemd-homework[1121]: Replaced embedded blob dir with contents of system blob dir. machine # [ 49.362145] systemd-homework[1121]: Synchronized disk. machine # [ 49.364068] systemd-homework[1121]: Everything completed. machine # [ 49.372610] passwd[1088]: pam_systemd_home(passwd:chauthtok): Successfully changed password for user test-homed-user. machine # [ 49.376128] systemd-homed[520]: test-homed-user: changing state passwd-while-active → active machine: (finished: waiting for file '/tmp/3', in 5.18 seconds) machine: must succeed: cat /tmp/3 machine: (finished: must succeed: cat /tmp/3, in 0.03 seconds) (finished: subtest: change homed user password, in 12.08 seconds) subtest: escalate to root from homed user machine: sending keys 'sudo id | tee /tmp/4\n' machine: (finished: sending keys 'sudo id | tee /tmp/4\n', in 0.22 seconds) machine: waiting for password for test-homed-user to appear on tty 1 machine # [ 50.184932] systemd-homed[520]: test-homed-user: changing state active → authenticating-for-acquire machine # [ 50.190322] systemd-homework[1156]: None of the supplied plaintext passwords unlock the user record's hashed passwords. machine # [ 50.203757] systemd-homed[520]: Authentication failed: Password for home test-homed-user is incorrect or not sufficient for authentication. machine # [ 50.205596] systemd-homed[520]: test-homed-user: changing state authenticating-for-acquire → active machine: (finished: waiting for password for test-homed-user to appear on tty 1, in 1.09 seconds) machine: sending keys 'barfoobar\n' machine: (finished: sending keys 'barfoobar\n', in 0.10 seconds) machine: waiting for file '/tmp/4' machine: (finished: waiting for file '/tmp/4', in 0.02 seconds) machine: waiting for success: grep uid=0 /tmp/4 machine # [ 51.186742] systemd-homed[520]: test-homed-user: changing state active → authenticating-for-acquire machine # [ 51.216498] systemd-homework[1172]: Provided password unlocks user record. machine # [ 51.884626] systemd-homework[1172]: Discovered used LUKS device /dev/mapper/home-test-homed-user, and validated password. machine # [ 52.011866] systemd-homework[1172]: Successfully re-activated LUKS device. machine # [ 52.032902] systemd-homework[1172]: Provided password unlocks user record. machine # [ 52.034248] systemd-homework[1172]: Discovered used loopback device /dev/loop1. machine # [ 52.035337] systemd-homework[1172]: Read embedded .identity file. machine # [ 52.053822] systemd-homework[1172]: Provided password unlocks user record. machine # [ 52.055263] systemd-homework[1172]: Reconciling user identities completed (host and header version were identical). machine # [ 52.056764] systemd-homework[1172]: Reconciling embedded user identity completed (host and embedded version were identical). machine # [ 52.066068] systemd-homework[1172]: Everything completed. machine # [ 52.070830] systemd-homed[520]: Home test-homed-user is signed exclusively by our key, accepting. machine # [ 52.076156] systemd-homed[520]: test-homed-user: changing state authenticating-for-acquire → active machine # [ 52.078238] sudo[1154]: pam_systemd_home(sudo:auth): Home for user test-homed-user successfully acquired. machine # [ 52.083963] sudo[1154]: test-homed-user : TTY=tty1 ; PWD=/home/test-homed-user ; USER=root ; COMMAND=/run/current-system/sw/bin/id machine # [ 52.098525] sudo[1154]: pam_unix(sudo:session): session opened for user root(uid=0) by test-homed-user(uid=60388) machine # [ 52.111234] sudo[1154]: pam_unix(sudo:session): session closed for user root machine: (finished: waiting for success: grep uid=0 /tmp/4, in 1.05 seconds) (finished: subtest: escalate to root from homed user, in 2.48 seconds) subtest: log out and deactivate homed user's home area machine: sending keys 'exit\n' machine: (finished: sending keys 'exit\n', in 0.05 seconds) machine: waiting for success: homectl inspect test-homed-user | grep 'State: inactive' machine # [ 52.262865] login[942]: pam_unix(login:session): session closed for user test-homed-user machine # [ 52.266979] login[942]: pam_systemd_home(login:session): Not deactivating home directory of test-homed-user, as it is still used. machine # [ 52.277434] systemd[1]: getty@tty1.service: Deactivated successfully. machine # [ 52.282386] systemd[1]: session-1.scope: Deactivated successfully. machine # [ 52.285980] systemd-logind[547]: Session 1 logged out. Waiting for processes to exit. machine # [ 52.291124] systemd[1]: getty@tty1.service: Scheduled restart job, restart counter is at 1. machine # [ 52.295336] systemd[1]: Started Getty on tty1. machine # [ 52.296485] systemd-logind[547]: Removed session 1. machine # [ 62.312252] systemd[1]: Stopping User Manager for UID 60388... machine # [ 62.321416] systemd[1027]: Activating special unit Exit the Session... machine # [ 62.322363] systemd[1027]: Stopped target Main User Target. machine # [ 62.323163] systemd[1027]: Stopped Run user-specific NixOS activation. machine # [ 62.325138] systemd[1027]: Stopped target Basic System. machine # [ 62.325855] systemd[1027]: Stopped target Paths. machine # [ 62.326586] systemd[1027]: Stopped target Sockets. machine # [ 62.327409] systemd[1027]: Stopped target Timers. machine # [ 62.328709] systemd[1027]: Stopped Daily Cleanup of User's Temporary Directories. machine # [ 62.329946] systemd[1027]: Closed D-Bus User Message Bus Socket. machine # [ 62.330877] systemd[1027]: Stopped Create User Files and Directories. machine # [ 62.331837] systemd[1027]: Removed slice User Application Slice. machine # [ 62.332661] systemd[1027]: Reached target Shutdown. machine # [ 62.333395] systemd[1027]: Finished Exit the Session. machine # [ 62.334202] systemd[1027]: Reached target Exit the Session. machine # [ 62.341830] systemd-homed[520]: Got notification that all sessions of user test-homed-user ended, deactivating automatically. machine # [ 62.345383] systemd-homed[520]: test-homed-user: changing state active → deactivating machine # [ 62.346629] systemd-logind[547]: Removed session 2. machine # [ 62.347496] systemd[1]: user@60388.service: Deactivated successfully. machine # [ 62.349983] systemd[1]: Stopped User Manager for UID 60388. machine # [ 62.355549] systemd-homework[1249]: Successfully acquired home volume key from kernel keyring. machine # [ 62.357443] systemd-homework[1249]: Discarded unused 673.3M. machine # [ 62.367237] systemd-homework[1249]: Syncing completed. machine # [ 62.368094] systemd[1]: home-test\x2dhomed\x2duser.mount: Deactivated successfully. machine # [ 62.374167] systemd[1]: Stopping User Runtime Directory /run/user/60388... machine # [ 62.416380] systemd[1]: run-user-60388.mount: Deactivated successfully. machine # [ 62.420176] systemd[1]: user-runtime-dir@60388.service: Deactivated successfully. machine # [ 62.421442] systemd[1]: Stopped User Runtime Directory /run/user/60388. machine # [ 62.433071] systemd-homework[1249]: Discovered used LUKS device /dev/mapper/home-test-homed-user, and validated password. machine # [ 62.559642] systemd-homework[1249]: Successfully re-activated LUKS device. machine # [ 62.561673] systemd-homework[1249]: Discovered used loopback device /dev/loop1. machine # [ 62.562768] systemd-homework[1249]: offset = 1048576, size = 799014912, image = 801112064 machine # [ 62.573708] systemd-homework[1249]: Ready to resize image size 764M → 274M, partition size 762M → 272M, file system size 746M → 256M. machine # [ 62.575474] systemd-homework[1249]: Allocated additional 673.3M. machine # [ 62.722760] BTRFS info (device dm-0): resize device /dev/mapper/home-test-homed-user (devid 1) from 782237696 to 268435456 machine # [ 62.581593] systemd-homework[1249]: File system resizing from 746M to 256M completed. machine # [ 62.583234] systemd-homework[1249]: Synchronized disk. machine # [ 62.716947] systemd-homework[1249]: LUKS device shrinking completed. machine # [ 62.862596] loop1: detected capacity change from 1560576 to 557056 machine # [ 62.723423] systemd-homework[1249]: Refreshing loop device size completed. machine # [ 62.724364] systemd-homework[1249]: Shrinking of image file completed. machine # [ 62.737168] systemd-homework[1249]: Shrinking of partition completed. machine # [ 62.738231] systemd-homework[1249]: Synchronized disk. machine # [ 62.738972] systemd-homework[1249]: Resizing completed. machine # [ 62.739805] systemd-homework[1249]: Image size is 274M, file system size is 256M, file system payload size is 256M, file system free is 249.9M. machine # [ 62.884083] BTRFS info (device dm-0): last unmount of filesystem 4f43b654-1290-46f1-8dca-dec692ce765c machine # [ 62.744693] systemd-homework[1249]: Unmounting completed. machine # [ 62.746240] systemd-homework[1249]: Discovered used LUKS device /dev/mapper/home-test-homed-user. machine # [ 62.748170] systemd-homework[1249]: Device home-test-homed-user is not active. machine # [ 62.758656] systemd-homed[520]: block device /sys/devices/virtual/block/dm-0 has been removed. machine # [ 62.763768] systemd-homework[1249]: Everything completed. machine # [ 62.773087] systemd-homed[520]: test-homed-user: changing state deactivating → inactive machine: (finished: waiting for success: homectl inspect test-homed-user | grep 'State: inactive', in 10.62 seconds) (finished: subtest: log out and deactivate homed user's home area, in 10.68 seconds) subtest: ssh as homed user sshClient: sending keys 'ssh -o StrictHostKeyChecking=no -i /tmp/id_ed25519 test-homed-user@machine\n' sshClient: (finished: sending keys 'ssh -o StrictHostKeyChecking=no -i /tmp/id_ed25519 test-homed-user@machine\n', in 0.77 seconds) sshClient: waiting for Please enter password for user to appear on tty 1 machine # [ 64.699168] systemd-homed[520]: test-homed-user: changing state inactive → activating-for-acquire machine # [ 64.705174] systemd-homework[1279]: None of the supplied plaintext passwords unlock the user record's hashed passwords. machine # [ 64.711060] systemd-homed[520]: Activation failed: Password for home test-homed-user is incorrect or not sufficient for authentication. machine # [ 64.713403] systemd-homed[520]: test-homed-user: changing state activating-for-acquire → inactive machine # [ 64.715216] systemd-homed[520]: Got notification that all sessions of user test-homed-user ended, deactivating automatically. machine # [ 64.717450] sshd-session[1275]: pam_systemd_home(sshd:account): Conversation function failed: Conversation error machine # [ 64.720329] systemd-homed[520]: Home test-homed-user already deactivated, no automatic deactivation needed. machine # [ 64.722035] sshd-session[1275]: pam_systemd_home(sshd:account): Home for user test-homed-user acquired in incomplete mode, requires later activation. machine # [ 64.724498] sshd-session[1275]: Accepted publickey for test-homed-user from 2001:db8:1::2 port 49404 ssh2: ED25519 SHA256:C2qEZYf26Z9rR85QThxCAZFoEbJs+CW1S7srbii0EBA machine # [ 64.774468] sshd-session[1275]: pam_unix(sshd:session): session opened for user test-homed-user(uid=60388) by (uid=0) machine # [ 64.789964] systemd[1]: Starting User Runtime Directory /run/user/60388... machine # [ 64.793242] systemd-logind[547]: New session '3' of user 'test-homed-user' with class 'user-incomplete' and type 'tty'. machine # [ 64.818577] systemd[1]: Finished User Runtime Directory /run/user/60388. machine # [ 64.823630] systemd[1]: Started Session 3 of User test-homed-user. machine # [ 64.839907] sshd-session[1275]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory machine # [ 64.842930] sshd-session[1275]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory machine # [ 64.860441] systemd-homed[520]: test-homed-user: changing state inactive → activating machine # [ 64.865114] systemd-homework[1285]: None of the supplied plaintext passwords unlock the user record's hashed passwords. machine # [ 64.870912] systemd-homed[520]: Activation failed: Password for home test-homed-user is incorrect or not sufficient for authentication. machine # [ 64.872775] systemd-homed[520]: test-homed-user: changing state activating → inactive sshClient: (finished: waiting for Please enter password for user to appear on tty 1, in 2.12 seconds) sshClient: sending keys 'barfoobar\n' sshClient: (finished: sending keys 'barfoobar\n', in 0.10 seconds) machine: waiting for success: pgrep -u test-homed-user bash machine # [ 65.944516] systemd-homed[520]: test-homed-user: changing state inactive → activating machine # [ 65.976739] systemd-homework[1290]: Provided password unlocks user record. machine # [ 65.986829] systemd-homework[1290]: Successfully locked image file '/home/test-homed-user.home'. machine # [ 65.992537] systemd-homework[1290]: Backing file is fully allocated already. machine # [ 66.139450] loop1: detected capacity change from 0 to 557056 machine # [ 65.999255] systemd-homework[1290]: Setting up loopback device /dev/loop1 completed. machine # [ 66.904723] systemd-homework[1290]: Setting up LUKS device /dev/mapper/home-test-homed-user completed. machine # [ 66.940239] systemd-homework[1290]: Provided password unlocks user record. machine # [ 66.945386] systemd-homework[1290]: Probing file system completed (found btrfs). machine # [ 66.948379] systemd-homework[1290]: No fsck for file system btrfs installed, ignoring. machine # [ 67.092773] BTRFS: device label test-homed-user devid 1 transid 17 /dev/mapper/home-test-homed-user (254:0) scanned by systemd-homewor (1290) machine # [ 67.096122] BTRFS info (device dm-0): first mount of filesystem 4f43b654-1290-46f1-8dca-dec692ce765c machine # [ 67.098466] BTRFS info (device dm-0): using crc32c (crc32c-lib) checksum algorithm machine # [ 67.102946] BTRFS info (device dm-0): enabling free space tree machine # [ 67.104435] BTRFS info (device dm-0): use zstd compression, level 1 machine # [ 66.963243] systemd-homework[1290]: Mounting file system completed. machine # [ 66.967080] systemd-homework[1290]: Discovered used loopback device /dev/loop1. machine # [ 66.968150] systemd-homework[1290]: offset = 1048576, size = 285212672, image = 287309824 machine # [ 66.977119] systemd-homework[1290]: Ready to resize image size 274M → 764M, partition size 272M → 762M, file system size 256M → 746M. machine # [ 66.979119] systemd-homework[1290]: Growing of image file from 274M to 764M completed. machine # [ 67.124446] loop1: detected capacity change from 557056 to 1560576 machine # [ 66.984230] systemd-homework[1290]: Refreshing loop device size completed. machine # [ 66.997169] systemd-homework[1290]: Growing of partition completed. machine # [ 67.028097] systemd-homework[1290]: LUKS device growing completed. machine # [ 67.176168] BTRFS info (device dm-0): resize device /dev/mapper/home-test-homed-user (devid 1) from 268435456 to 782237696 machine # [ 67.036059] systemd-homework[1290]: File system resizing from 256M to 746M completed. machine # [ 67.037133] systemd-homework[1290]: Synchronized disk. machine # [ 67.037851] systemd-homework[1290]: Synchronized disk. machine # [ 67.038575] systemd-homework[1290]: Resizing completed. machine # [ 67.039347] systemd-homework[1290]: Image size is 764M, file system size is 746M, file system payload size is 746M, file system free is 739.9M. machine # [ 67.040991] systemd-homework[1290]: Read embedded .identity file. machine # [ 67.059807] systemd-homework[1290]: Provided password unlocks user record. machine # [ 67.061318] systemd-homework[1290]: Reconciling user identities completed (host and header version were identical). machine # [ 67.062573] systemd-homework[1290]: Reconciling embedded user identity completed (host and embedded version were identical). machine # [ 67.064422] systemd-homework[1290]: Recursive changing of ownership not necessary, skipped. machine # [ 67.065888] systemd-homework[1290]: Synchronized disk. machine # [ 67.067365] systemd-homework[1290]: Moving to final mount point /home/test-homed-user completed. machine # [ 67.087962] systemd-homework[1290]: Activation completed. machine # [ 67.088881] systemd-homework[1290]: Image size is 762M, file system size is 746M, file system payload size is 746M, file system free is 739.9M. machine # [ 67.098099] systemd-homed[520]: Home test-homed-user is signed exclusively by our key, accepting. machine # [ 67.103593] systemd-homed[520]: test-homed-user: changing state activating → active machine # [ 67.116314] systemd[1]: Starting User Manager for UID 60388... machine # [ 67.144526] (systemd)[1331]: pam_systemd_home(systemd-user:account): Home for user test-homed-user successfully acquired. machine # [ 67.187712] (systemd)[1331]: pam_unix(systemd-user:session): session opened for user test-homed-user(uid=60388) by (uid=0) machine # [ 67.193273] systemd-logind[547]: New session '4' of user 'test-homed-user' with class 'manager' and type 'unspecified'. machine # [ 67.230082] systemd[1331]: Failed to adjust io pressure threshold, ignoring: Device or resource busy machine # [ 67.402614] systemd[1331]: Queued start job for default target Main User Target. machine # [ 67.405686] systemd[1331]: Failed to adjust io pressure threshold, ignoring: Device or resource busy machine # [ 67.408271] systemd[1331]: Created slice User Application Slice. machine # [ 67.410055] systemd[1331]: Started Daily Cleanup of User's Temporary Directories. machine # [ 67.411051] systemd[1331]: Reached target Paths. machine # [ 67.411678] systemd[1331]: Reached target Timers. machine # [ 67.416060] systemd[1331]: Starting D-Bus User Message Bus Socket... machine # [ 67.418849] systemd[1331]: Starting Create User Files and Directories... machine # [ 67.454950] systemd[1331]: Finished Create User Files and Directories. machine # [ 67.458697] systemd[1331]: Listening on D-Bus User Message Bus Socket. machine # [ 67.459627] systemd[1331]: Reached target Sockets. machine # [ 67.460343] systemd[1331]: Reached target Basic System. machine # [ 67.461083] systemd[1]: Started User Manager for UID 60388. machine # [ 67.465359] systemd[1331]: Starting Run user-specific NixOS activation... machine # [ 67.509777] systemd[1331]: Finished Run user-specific NixOS activation. machine # [ 67.511163] systemd[1331]: Reached target Main User Target. machine # [ 67.513309] systemd[1331]: Startup finished in 295ms. machine: (finished: waiting for success: pgrep -u test-homed-user bash, in 2.20 seconds) sshClient: sending keys 'whoami > /tmp/5\n' sshClient: (finished: sending keys 'whoami > /tmp/5\n', in 0.17 seconds) machine: waiting for file '/tmp/5' machine: (finished: waiting for file '/tmp/5', in 1.06 seconds) machine: must succeed: cat /tmp/5 machine: (finished: must succeed: cat /tmp/5, in 0.02 seconds) sshClient: sending keys 'exit\n' sshClient: (finished: sending keys 'exit\n', in 0.05 seconds) sshClient: sending keys 'exit\n' machine # [ 69.399326] sshd-session[1283]: Received disconnect from 2001:db8:1::2 port 49404:11: disconnected by user machine # [ 69.400648] sshd-session[1283]: Disconnected from user test-homed-user 2001:db8:1::2 port 49404 sshClient: (finished: sending keys 'exit\n', in 0.05 seconds) (finished: subtest: ssh as homed user, in 6.55 seconds) (finished: run the VM test script, in 70.35 seconds) machine # [ 69.404383] sshd-session[1275]: pam_unix(sshd:session): session closed for user test-homed-user machine # [ 69.406801] sshd-session[1275]: pam_systemd_home(sshd:session): Not deactivating home directory of test-homed-user, as it is still used. machine # [ 69.412563] systemd[1]: session-3.scope: Deactivated successfully. machine # [ 69.416340] systemd-logind[547]: Session 3 logged out. Waiting for processes to exit. machine # [ 69.418193] systemd-logind[547]: Removed session 3. sshClient # [ 69.402672] login[691]: pam_unix(login:session): session closed for user test-normal-user sshClient # [ 69.413835] systemd[1]: getty@tty1.service: Deactivated successfully. sshClient # [ 69.427452] systemd[1]: session-1.scope: Deactivated successfully. sshClient # [ 69.430539] systemd[1]: session-1.scope: Consumed 138ms CPU time over 35.403s wall clock time, 7.5M memory peak, 4K written to disk, 27.3K incoming IP traffic, 26K outgoing IP traffic. sshClient # [ 69.438595] systemd[1]: getty@tty1.service: Scheduled restart job, restart counter is at 1. sshClient # [ 69.443676] systemd-logind[535]: Session 1 logged out. Waiting for processes to exit. sshClient # [ 69.447899] systemd[1]: Started Getty on tty1. sshClient # [ 69.449947] systemd-logind[535]: Removed session 1. test script finished in 70.49s cleanup kill QemuMachine (pid 47) machine # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14) kill QemuMachine (pid 48) sshClient # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14) (finished: cleanup, in 0.32 seconds) additionally exposed symbols: machine, sshClient, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh