these 11 derivations will be built: /nix/store/czhffs982r8982kl5iig1m6c35isn0ps-unit-niks3.service.drv /nix/store/snlci9h6cfml1139rdrnkncgr562xai5-system-units.drv /nix/store/mmk5k9lyhm4x1c7frygvg2zyhla6qhdh-etc.drv /nix/store/5fb1s9bav0mgdlg354mdj51qxhsimhqr-activate.drv /nix/store/ciyljx95x9fkw22pgk0g1l269k1abhnz-nixos-system-server-test.drv /nix/store/45qks229jbxkz857ldrfsvvaflisvi6n-closure-info.drv /nix/store/vp0p7p0z10x3di8acyzg2hkk4ksc9fff-run-nixos-vm.drv /nix/store/j2sw6z45dhia0398yksv63f1i816an8l-nixos-vm.drv /nix/store/n7p3f48zmx5vvcj6lsmk5x2qnly4y8fk-driverConfiguration.json.drv /nix/store/rpw57xd2c0g7j7y6w621la8pqzqwc4xm-nixos-test-driver-nixos-test-niks3.drv /nix/store/li6k5q03knv2nqczwk0chm5lpp4zpf36-vm-test-run-nixos-test-niks3.drv building '/nix/store/snlci9h6cfml1139rdrnkncgr562xai5-system-units.drv' system-units> tribuchet: building on jamie building '/nix/store/mmk5k9lyhm4x1c7frygvg2zyhla6qhdh-etc.drv' etc> tribuchet: building on jamie building '/nix/store/5fb1s9bav0mgdlg354mdj51qxhsimhqr-activate.drv' activate> tribuchet: building on jamie activate> structuredAttrs is enabled building '/nix/store/ciyljx95x9fkw22pgk0g1l269k1abhnz-nixos-system-server-test.drv' nixos-system-server-test> tribuchet: building on jamie nixos-system-server-test> structuredAttrs is enabled building '/nix/store/45qks229jbxkz857ldrfsvvaflisvi6n-closure-info.drv' closure-info> tribuchet: building on jamie closure-info> structuredAttrs is enabled building '/nix/store/vp0p7p0z10x3di8acyzg2hkk4ksc9fff-run-nixos-vm.drv' run-nixos-vm> tribuchet: building on jamie run-nixos-vm> structuredAttrs is enabled building '/nix/store/j2sw6z45dhia0398yksv63f1i816an8l-nixos-vm.drv' nixos-vm> tribuchet: building on jamie building '/nix/store/n7p3f48zmx5vvcj6lsmk5x2qnly4y8fk-driverConfiguration.json.drv' driverConfiguration.json> tribuchet: building on jamie driverConfiguration.json> structuredAttrs is enabled building '/nix/store/rpw57xd2c0g7j7y6w621la8pqzqwc4xm-nixos-test-driver-nixos-test-niks3.drv' nixos-test-driver-nixos-test-niks3> tribuchet: building on jamie nixos-test-driver-nixos-test-niks3> Running type check (enable/disable: config.skipTypeCheck) nixos-test-driver-nixos-test-niks3> See https://nixos.org/manual/nixos/stable/#test-opt-skipTypeCheck nixos-test-driver-nixos-test-niks3> All checks passed! nixos-test-driver-nixos-test-niks3> Linting test script (enable/disable: config.skipLint) nixos-test-driver-nixos-test-niks3> See https://nixos.org/manual/nixos/stable/#test-opt-skipLint nixos-test-driver-nixos-test-niks3> All checks passed! building '/nix/store/li6k5q03knv2nqczwk0chm5lpp4zpf36-vm-test-run-nixos-test-niks3.drv' vm-test-run-nixos-test-niks3> tribuchet: building on jamie vm-test-run-nixos-test-niks3> Machine state will be reset. To keep it, pass --keep-machine-state vm-test-run-nixos-test-niks3> start all VLans vm-test-run-nixos-test-niks3> (finished: start all VLans, in 0.00 seconds) vm-test-run-nixos-test-niks3> Test will time out and terminate in 3600.0 seconds vm-test-run-nixos-test-niks3> run the VM test script vm-test-run-nixos-test-niks3> start all VMs vm-test-run-nixos-test-niks3> builder: starting vm vm-test-run-nixos-test-niks3> server: starting vm vm-test-run-nixos-test-niks3> builder # Disk image does not exist, creating the virtualisation disk image... vm-test-run-nixos-test-niks3> builder: QEMU running (pid 47) vm-test-run-nixos-test-niks3> builder # Formatting '/build/vm-state-builder/tmp.pJurHzJtNG', fmt=raw size=1073741824 vm-test-run-nixos-test-niks3> builder # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-nixos-test-niks3> builder # Discarding device blocks: 0/262144 done vm-test-run-nixos-test-niks3> builder # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-nixos-test-niks3> builder # Filesystem UUID: af18eb89-4e0b-4e40-ac59-3e78dc639ab9 vm-test-run-nixos-test-niks3> builder # Superblock backups stored on blocks: vm-test-run-nixos-test-niks3> builder # 32768, 98304, 163840, 229376 vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # Allocating group tables: 0/8 done vm-test-run-nixos-test-niks3> builder # Writing inode tables: 0/8 done vm-test-run-nixos-test-niks3> builder # Creating journal (8192 blocks): done vm-test-run-nixos-test-niks3> server # Disk image does not exist, creating the virtualisation disk image... vm-test-run-nixos-test-niks3> builder # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> server # Formatting '/build/vm-state-server/tmp.jMX0BbnZYV', fmt=raw size=1073741824 vm-test-run-nixos-test-niks3> builder # Virtualisation disk image created. vm-test-run-nixos-test-niks3> builder # Starting virtiofs daemons... vm-test-run-nixos-test-niks3> server: QEMU running (pid 48) vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-nixos-test-niks3> server # mke2fs 1.47.4 (6-Mar-2025) vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-nixos-test-niks3> server # Discarding device blocks: 0/262144 done vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-nixos-test-niks3> server # Creating filesystem with 262144 4k blocks and 65536 inodes vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-nixos-test-niks3> server # Filesystem UUID: 804d2349-e2fe-40a4-a923-8e73b709dcd3 vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-nixos-test-niks3> server # Superblock backups stored on blocks: vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-nixos-test-niks3> server # 32768, 98304, 163840, 229376 vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-nixos-test-niks3> server # Allocating group tables: 0/8 done vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-nixos-test-niks3> server # Writing inode tables: 0/8 done vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z INFO virtiofsd] Client connected, servicing requests vm-test-run-nixos-test-niks3> server # Creating journal (8192 blocks): done vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z INFO virtiofsd] Client connected, servicing requests vm-test-run-nixos-test-niks3> server # Writing superblocks and filesystem accounting information: 0/8 done vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:20:40Z INFO virtiofsd] Client connected, servicing requests vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> (finished: start all VMs, in 0.42 seconds) vm-test-run-nixos-test-niks3> server # Virtualisation disk image created. vm-test-run-nixos-test-niks3> server: waiting for unit postgresql.service vm-test-run-nixos-test-niks3> server # Starting virtiofs daemons... vm-test-run-nixos-test-niks3> server: waiting for the VM to finish booting vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z INFO virtiofsd] Waiting for vhost-user socket connection... vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z INFO virtiofsd] Client connected, servicing requests vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z INFO virtiofsd] Client connected, servicing requests vm-test-run-nixos-test-niks3> server # [2026-10-01T10:20:40Z INFO virtiofsd] Client connected, servicing requests vm-test-run-nixos-test-niks3> builder # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-nixos-test-niks3> server # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 vm-test-run-nixos-test-niks3> builder # Press Ctrl-B to configure iPXE (PCI 00:02.0)... vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 vm-test-run-nixos-test-niks3> builder # Press Ctrl-B to configure iPXE (PCI 00:05.0)... vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> builder # vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 vm-test-run-nixos-test-niks3> server # Press Ctrl-B to configure iPXE (PCI 00:02.0)... vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 vm-test-run-nixos-test-niks3> server # Press Ctrl-B to configure iPXE (PCI 00:05.0)... vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> server # vm-test-run-nixos-test-niks3> builder # Booting from ROM... vm-test-run-nixos-test-niks3> server # Booting from ROM... vm-test-run-nixos-test-niks3> builder # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.54 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Sep 25 14:35:54 UTC 2026 vm-test-run-nixos-test-niks3> builder # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/380z13x9384wfk93j6facg9z2kkbjxp0-nixos-system-builder-test/init regInfo=/nix/.ro-store/gf777rx49vkf5nc4594sh7wlxv5mx51x-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-nixos-test-niks3> builder # [ 0.000000] APIC: Static calls initialized vm-test-run-nixos-test-niks3> builder # [ 0.000000] SMBIOS 2.8 present. vm-test-run-nixos-test-niks3> builder # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-nixos-test-niks3> builder # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-nixos-test-niks3> builder # [ 0.000000] Hypervisor detected: KVM vm-test-run-nixos-test-niks3> builder # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 vm-test-run-nixos-test-niks3> builder # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-nixos-test-niks3> builder # [ 0.000000] kvm-clock: using sched offset of 479221654 cycles vm-test-run-nixos-test-niks3> builder # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-nixos-test-niks3> builder # [ 0.000005] tsc: Detected 2400.012 MHz processor vm-test-run-nixos-test-niks3> builder # [ 0.000810] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 vm-test-run-nixos-test-niks3> builder # [ 0.000837] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-nixos-test-niks3> builder # [ 0.000839] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-nixos-test-niks3> builder # [ 0.002736] found SMP MP-table at [mem 0x000f5450-0x000f545f] vm-test-run-nixos-test-niks3> builder # [ 0.002748] Using GB pages for direct mapping vm-test-run-nixos-test-niks3> builder # [ 0.002867] RAMDISK: [mem 0x3e369000-0x3ffcffff] vm-test-run-nixos-test-niks3> builder # [ 0.002876] ACPI: Early table checksum verification disabled vm-test-run-nixos-test-niks3> builder # [ 0.002878] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) vm-test-run-nixos-test-niks3> builder # [ 0.002882] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.002887] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.002894] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.002896] ACPI: FACS 0x000000003FFE0000 000040 vm-test-run-nixos-test-niks3> builder # [ 0.002897] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.002899] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.002900] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> server # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.54 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Sep 25 14:35:54 UTC 2026 vm-test-run-nixos-test-niks3> builder # [ 0.002902] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.002903] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] vm-test-run-nixos-test-niks3> builder # [ 0.002904] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] vm-test-run-nixos-test-niks3> builder # [ 0.002905] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] vm-test-run-nixos-test-niks3> server # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/k5v6c7m838h2am89l3yqmm1r93rg6gh6-nixos-system-server-test/init regInfo=/nix/.ro-store/5a1ws3gqg3bpw4sad354iyjdx8ijgihx-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-nixos-test-niks3> builder # [ 0.002905] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-provided physical RAM map: vm-test-run-nixos-test-niks3> builder # [ 0.002906] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable vm-test-run-nixos-test-niks3> builder # [ 0.002906] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.002907] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.003174] No NUMA configuration found vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable vm-test-run-nixos-test-niks3> builder # [ 0.003175] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.003178] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] vm-test-run-nixos-test-niks3> builder # [ 0.006159] Zone ranges: vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.006160] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.006162] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> builder # [ 0.006163] Normal empty vm-test-run-nixos-test-niks3> builder # [ 0.006164] Device empty vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.006164] Movable zone start for each node vm-test-run-nixos-test-niks3> builder # [ 0.006165] Early memory node ranges vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.006165] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-nixos-test-niks3> server # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved vm-test-run-nixos-test-niks3> builder # [ 0.006166] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> server # [ 0.000000] NX (Execute Disable) protection: active vm-test-run-nixos-test-niks3> server # [ 0.000000] APIC: Static calls initialized vm-test-run-nixos-test-niks3> builder # [ 0.006167] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> server # [ 0.000000] SMBIOS 2.8 present. vm-test-run-nixos-test-niks3> builder # [ 0.006189] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-nixos-test-niks3> builder # [ 0.006475] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-nixos-test-niks3> server # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 vm-test-run-nixos-test-niks3> server # [ 0.000000] DMI: Memory slots populated: 1/1 vm-test-run-nixos-test-niks3> builder # [ 0.025776] On node 0, zone DMA32: 40 pages in unavailable ranges vm-test-run-nixos-test-niks3> server # [ 0.000000] Hypervisor detected: KVM vm-test-run-nixos-test-niks3> builder # [ 0.026245] ACPI: PM-Timer IO Port: 0x608 vm-test-run-nixos-test-niks3> builder # [ 0.026258] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-nixos-test-niks3> server # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 vm-test-run-nixos-test-niks3> server # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 vm-test-run-nixos-test-niks3> builder # [ 0.026289] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-nixos-test-niks3> server # [ 0.000000] kvm-clock: using sched offset of 500774225 cycles vm-test-run-nixos-test-niks3> builder # [ 0.026291] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-nixos-test-niks3> builder # [ 0.026293] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-nixos-test-niks3> server # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns vm-test-run-nixos-test-niks3> builder # [ 0.026294] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-nixos-test-niks3> server # [ 0.000005] tsc: Detected 2400.012 MHz processor vm-test-run-nixos-test-niks3> builder # [ 0.026296] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-nixos-test-niks3> server # [ 0.000812] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 vm-test-run-nixos-test-niks3> builder # [ 0.026296] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-nixos-test-niks3> server # [ 0.000839] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs vm-test-run-nixos-test-niks3> builder # [ 0.026299] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-nixos-test-niks3> server # [ 0.000842] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT vm-test-run-nixos-test-niks3> builder # [ 0.026300] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-nixos-test-niks3> builder # [ 0.026304] TSC deadline timer available vm-test-run-nixos-test-niks3> server # [ 0.002746] found SMP MP-table at [mem 0x000f5450-0x000f545f] vm-test-run-nixos-test-niks3> builder # [ 0.026308] CPU topo: Max. logical packages: 1 vm-test-run-nixos-test-niks3> server # [ 0.002759] Using GB pages for direct mapping vm-test-run-nixos-test-niks3> builder # [ 0.026309] CPU topo: Max. logical dies: 1 vm-test-run-nixos-test-niks3> server # [ 0.002875] RAMDISK: [mem 0x3e36b000-0x3ffcffff] vm-test-run-nixos-test-niks3> builder # [ 0.026309] CPU topo: Max. dies per package: 1 vm-test-run-nixos-test-niks3> server # [ 0.002883] ACPI: Early table checksum verification disabled vm-test-run-nixos-test-niks3> builder # [ 0.026313] CPU topo: Max. threads per core: 1 vm-test-run-nixos-test-niks3> server # [ 0.002886] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) vm-test-run-nixos-test-niks3> builder # [ 0.026313] CPU topo: Num. cores per package: 1 vm-test-run-nixos-test-niks3> builder # [ 0.026314] CPU topo: Num. threads per package: 1 vm-test-run-nixos-test-niks3> server # [ 0.002890] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.026314] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs vm-test-run-nixos-test-niks3> server # [ 0.002894] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.026336] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-nixos-test-niks3> builder # [ 0.026368] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-nixos-test-niks3> server # [ 0.002901] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> server # [ 0.002903] ACPI: FACS 0x000000003FFE0000 000040 vm-test-run-nixos-test-niks3> builder # [ 0.026369] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-nixos-test-niks3> builder # [ 0.026371] [mem 0x40000000-0xafffffff] available for PCI devices vm-test-run-nixos-test-niks3> server # [ 0.002905] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.026373] Booting paravirtualized kernel on KVM vm-test-run-nixos-test-niks3> server # [ 0.002906] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.026376] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-nixos-test-niks3> server # [ 0.002908] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.030879] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 vm-test-run-nixos-test-niks3> server # [ 0.002909] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) vm-test-run-nixos-test-niks3> builder # [ 0.033211] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 vm-test-run-nixos-test-niks3> builder # [ 0.033259] kvm-guest: PV spinlocks disabled, single CPU vm-test-run-nixos-test-niks3> server # [ 0.002911] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] vm-test-run-nixos-test-niks3> server # [ 0.002912] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] vm-test-run-nixos-test-niks3> server # [ 0.002912] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] vm-test-run-nixos-test-niks3> server # [ 0.002913] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] vm-test-run-nixos-test-niks3> server # [ 0.002913] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] vm-test-run-nixos-test-niks3> builder # [ 0.033260] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/380z13x9384wfk93j6facg9z2kkbjxp0-nixos-system-builder-test/init regInfo=/nix/.ro-store/gf777rx49vkf5nc4594sh7wlxv5mx51x-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-nixos-test-niks3> server # [ 0.002914] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] vm-test-run-nixos-test-niks3> server # [ 0.002914] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] vm-test-run-nixos-test-niks3> builder # [ 0.033360] Unknown kernel command line parameters "regInfo=/nix/.ro-store/gf777rx49vkf5nc4594sh7wlxv5mx51x-closure-info/registration", will be passed to user space. vm-test-run-nixos-test-niks3> server # [ 0.003141] No NUMA configuration found vm-test-run-nixos-test-niks3> builder # [ 0.033373] random: crng init done vm-test-run-nixos-test-niks3> builder # [ 0.033374] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-nixos-test-niks3> server # [ 0.003142] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> server # [ 0.003144] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] vm-test-run-nixos-test-niks3> builder # [ 0.034524] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.005603] Zone ranges: vm-test-run-nixos-test-niks3> builder # [ 0.034537] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.005604] DMA [mem 0x0000000000001000-0x0000000000ffffff] vm-test-run-nixos-test-niks3> builder # [ 0.034567] Fallback order for Node 0: 0 vm-test-run-nixos-test-niks3> server # [ 0.005606] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> server # [ 0.005607] Normal empty vm-test-run-nixos-test-niks3> builder # [ 0.034570] Built 1 zonelists, mobility grouping on. Total pages: 262006 vm-test-run-nixos-test-niks3> server # [ 0.005608] Device empty vm-test-run-nixos-test-niks3> builder # [ 0.034571] Policy zone: DMA32 vm-test-run-nixos-test-niks3> server # [ 0.005608] Movable zone start for each node vm-test-run-nixos-test-niks3> builder # [ 0.037198] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-nixos-test-niks3> server # [ 0.005609] Early memory node ranges vm-test-run-nixos-test-niks3> builder # [ 0.040284] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 vm-test-run-nixos-test-niks3> server # [ 0.005610] node 0: [mem 0x0000000000001000-0x000000000009efff] vm-test-run-nixos-test-niks3> builder # [ 0.042669] allocated 2097152 bytes of page_ext vm-test-run-nixos-test-niks3> server # [ 0.005611] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> builder # [ 0.052892] ftrace: allocating 48804 entries in 192 pages vm-test-run-nixos-test-niks3> builder # [ 0.052894] ftrace: allocated 192 pages with 2 groups vm-test-run-nixos-test-niks3> server # [ 0.005612] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] vm-test-run-nixos-test-niks3> builder # [ 0.053776] Dynamic Preempt: lazy vm-test-run-nixos-test-niks3> server # [ 0.005632] On node 0, zone DMA: 1 pages in unavailable ranges vm-test-run-nixos-test-niks3> builder # [ 0.053957] rcu: Preemptible hierarchical RCU implementation. vm-test-run-nixos-test-niks3> server # [ 0.005914] On node 0, zone DMA: 97 pages in unavailable ranges vm-test-run-nixos-test-niks3> builder # [ 0.053958] rcu: RCU event tracing is enabled. vm-test-run-nixos-test-niks3> server # [ 0.025388] On node 0, zone DMA32: 40 pages in unavailable ranges vm-test-run-nixos-test-niks3> builder # [ 0.053959] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. vm-test-run-nixos-test-niks3> server # [ 0.025847] ACPI: PM-Timer IO Port: 0x608 vm-test-run-nixos-test-niks3> builder # [ 0.053960] Trampoline variant of Tasks RCU enabled. vm-test-run-nixos-test-niks3> server # [ 0.025857] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) vm-test-run-nixos-test-niks3> builder # [ 0.053961] Rude variant of Tasks RCU enabled. vm-test-run-nixos-test-niks3> builder # [ 0.053961] Tracing variant of Tasks RCU enabled. vm-test-run-nixos-test-niks3> server # [ 0.025883] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 vm-test-run-nixos-test-niks3> builder # [ 0.053962] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-nixos-test-niks3> server # [ 0.025886] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) vm-test-run-nixos-test-niks3> builder # [ 0.053962] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 vm-test-run-nixos-test-niks3> server # [ 0.025888] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) vm-test-run-nixos-test-niks3> server # [ 0.025889] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) vm-test-run-nixos-test-niks3> builder # [ 0.053973] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. vm-test-run-nixos-test-niks3> server # [ 0.025890] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) vm-test-run-nixos-test-niks3> builder # [ 0.053974] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. vm-test-run-nixos-test-niks3> server # [ 0.025891] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) vm-test-run-nixos-test-niks3> builder # [ 0.053975] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. vm-test-run-nixos-test-niks3> server # [ 0.025893] ACPI: Using ACPI (MADT) for SMP configuration information vm-test-run-nixos-test-niks3> builder # [ 0.058401] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 vm-test-run-nixos-test-niks3> server # [ 0.025894] ACPI: HPET id: 0x8086a201 base: 0xfed00000 vm-test-run-nixos-test-niks3> builder # [ 0.058703] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-nixos-test-niks3> server # [ 0.025897] TSC deadline timer available vm-test-run-nixos-test-niks3> server # [ 0.025901] CPU topo: Max. logical packages: 1 vm-test-run-nixos-test-niks3> builder # [ 0.058710] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-nixos-test-niks3> server # [ 0.025902] CPU topo: Max. logical dies: 1 vm-test-run-nixos-test-niks3> server # [ 0.025902] CPU topo: Max. dies per package: 1 vm-test-run-nixos-test-niks3> builder # [ 0.058819] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-nixos-test-niks3> server # [ 0.025906] CPU topo: Max. threads per core: 1 vm-test-run-nixos-test-niks3> builder # [ 0.062366] Console: colour VGA+ 80x25 vm-test-run-nixos-test-niks3> server # [ 0.025906] CPU topo: Num. cores per package: 1 vm-test-run-nixos-test-niks3> builder # [ 0.062369] printk: legacy console [tty0] enabled vm-test-run-nixos-test-niks3> server # [ 0.025906] CPU topo: Num. threads per package: 1 vm-test-run-nixos-test-niks3> builder # [ 0.092067] printk: legacy console [ttyS0] enabled vm-test-run-nixos-test-niks3> server # [ 0.025907] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs vm-test-run-nixos-test-niks3> builder # [ 0.189529] ACPI: Core revision 20250807 vm-test-run-nixos-test-niks3> server # [ 0.025925] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() vm-test-run-nixos-test-niks3> builder # [ 0.190381] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-nixos-test-niks3> server # [ 0.025954] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] vm-test-run-nixos-test-niks3> builder # [ 0.191899] APIC: Switch to symmetric I/O mode setup vm-test-run-nixos-test-niks3> server # [ 0.025956] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] vm-test-run-nixos-test-niks3> builder # [ 0.192859] x2apic enabled vm-test-run-nixos-test-niks3> server # [ 0.025957] [mem 0x40000000-0xafffffff] available for PCI devices vm-test-run-nixos-test-niks3> server # [ 0.025958] Booting paravirtualized kernel on KVM vm-test-run-nixos-test-niks3> builder # [ 0.193635] APIC: Switched APIC routing to: physical x2apic vm-test-run-nixos-test-niks3> server # [ 0.025961] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns vm-test-run-nixos-test-niks3> builder # [ 0.195441] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-nixos-test-niks3> server # [ 0.030423] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 vm-test-run-nixos-test-niks3> server # [ 0.032752] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 vm-test-run-nixos-test-niks3> builder # [ 0.196416] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns vm-test-run-nixos-test-niks3> server # [ 0.032800] kvm-guest: PV spinlocks disabled, single CPU vm-test-run-nixos-test-niks3> builder # [ 0.198070] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) vm-test-run-nixos-test-niks3> builder # [ 0.199157] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-nixos-test-niks3> builder # [ 0.200198] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-nixos-test-niks3> server # [ 0.032802] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/k5v6c7m838h2am89l3yqmm1r93rg6gh6-nixos-system-server-test/init regInfo=/nix/.ro-store/5a1ws3gqg3bpw4sad354iyjdx8ijgihx-closure-info/registration console=ttyS0,115200n8 console=tty0 vm-test-run-nixos-test-niks3> builder # [ 0.201068] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-nixos-test-niks3> server # [ 0.032897] Unknown kernel command line parameters "regInfo=/nix/.ro-store/5a1ws3gqg3bpw4sad354iyjdx8ijgihx-closure-info/registration", will be passed to user space. vm-test-run-nixos-test-niks3> builder # [ 0.202071] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-nixos-test-niks3> server # [ 0.032909] random: crng init done vm-test-run-nixos-test-niks3> server # [ 0.032909] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes vm-test-run-nixos-test-niks3> builder # [ 0.204067] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-nixos-test-niks3> server # [ 0.034063] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.205068] Transient Scheduler Attacks: Vulnerable: No microcode vm-test-run-nixos-test-niks3> server # [ 0.034076] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.206067] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-nixos-test-niks3> server # [ 0.034106] Fallback order for Node 0: 0 vm-test-run-nixos-test-niks3> builder # [ 0.207067] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-nixos-test-niks3> server # [ 0.034109] Built 1 zonelists, mobility grouping on. Total pages: 262006 vm-test-run-nixos-test-niks3> server # [ 0.034110] Policy zone: DMA32 vm-test-run-nixos-test-niks3> server # [ 0.037200] mem auto-init: stack:all(zero), heap alloc:on, heap free:off vm-test-run-nixos-test-niks3> server # [ 0.039813] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 vm-test-run-nixos-test-niks3> server # [ 0.042195] allocated 2097152 bytes of page_ext vm-test-run-nixos-test-niks3> server # [ 0.052292] ftrace: allocating 48804 entries in 192 pages vm-test-run-nixos-test-niks3> builder # [ 0.208067] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-nixos-test-niks3> server # [ 0.052294] ftrace: allocated 192 pages with 2 groups vm-test-run-nixos-test-niks3> server # [ 0.053172] Dynamic Preempt: lazy vm-test-run-nixos-test-niks3> builder # [ 0.210075] Spectre V2 : Enabling IBPB for BPF vm-test-run-nixos-test-niks3> server # [ 0.053325] rcu: Preemptible hierarchical RCU implementation. vm-test-run-nixos-test-niks3> server # [ 0.053326] rcu: RCU event tracing is enabled. vm-test-run-nixos-test-niks3> builder # [ 0.211069] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-nixos-test-niks3> server # [ 0.053327] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. vm-test-run-nixos-test-niks3> builder # [ 0.212068] active return thunk: srso_alias_return_thunk vm-test-run-nixos-test-niks3> server # [ 0.053329] Trampoline variant of Tasks RCU enabled. vm-test-run-nixos-test-niks3> server # [ 0.053329] Rude variant of Tasks RCU enabled. vm-test-run-nixos-test-niks3> builder # [ 0.213088] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-nixos-test-niks3> server # [ 0.053329] Tracing variant of Tasks RCU enabled. vm-test-run-nixos-test-niks3> builder # [ 0.214067] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-nixos-test-niks3> server # [ 0.053330] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. vm-test-run-nixos-test-niks3> builder # [ 0.215067] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-nixos-test-niks3> server # [ 0.053331] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 vm-test-run-nixos-test-niks3> builder # [ 0.216067] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-nixos-test-niks3> server # [ 0.053389] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. vm-test-run-nixos-test-niks3> builder # [ 0.217067] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-nixos-test-niks3> server # [ 0.053390] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. vm-test-run-nixos-test-niks3> builder # [ 0.218067] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-nixos-test-niks3> server # [ 0.053391] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. vm-test-run-nixos-test-niks3> builder # [ 0.219067] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-nixos-test-niks3> server # [ 0.057831] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 vm-test-run-nixos-test-niks3> builder # [ 0.220961] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-nixos-test-niks3> server # [ 0.058120] rcu: srcu_init: Setting srcu_struct sizes based on contention. vm-test-run-nixos-test-niks3> builder # [ 0.221778] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-nixos-test-niks3> server # [ 0.058128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns vm-test-run-nixos-test-niks3> builder # [ 0.222780] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-nixos-test-niks3> server # [ 0.058236] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) vm-test-run-nixos-test-niks3> builder # [ 0.223775] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-nixos-test-niks3> server # [ 0.061832] Console: colour VGA+ 80x25 vm-test-run-nixos-test-niks3> server # [ 0.061835] printk: legacy console [tty0] enabled vm-test-run-nixos-test-niks3> builder # [ 0.224782] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-nixos-test-niks3> server # [ 0.091288] printk: legacy console [ttyS0] enabled vm-test-run-nixos-test-niks3> server # [ 0.195536] ACPI: Core revision 20250807 vm-test-run-nixos-test-niks3> builder # [ 0.225067] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. vm-test-run-nixos-test-niks3> server # [ 0.196416] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns vm-test-run-nixos-test-niks3> server # [ 0.198170] APIC: Switch to symmetric I/O mode setup vm-test-run-nixos-test-niks3> server # [ 0.199164] x2apic enabled vm-test-run-nixos-test-niks3> server # [ 0.199900] APIC: Switched APIC routing to: physical x2apic vm-test-run-nixos-test-niks3> server # [ 0.201687] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 vm-test-run-nixos-test-niks3> server # [ 0.202658] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns vm-test-run-nixos-test-niks3> server # [ 0.204435] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) vm-test-run-nixos-test-niks3> server # [ 0.205521] x86/cpu: User Mode Instruction Prevention (UMIP) activated vm-test-run-nixos-test-niks3> server # [ 0.207541] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 vm-test-run-nixos-test-niks3> server # [ 0.208432] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 vm-test-run-nixos-test-niks3> server # [ 0.209436] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto vm-test-run-nixos-test-niks3> server # [ 0.210432] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl vm-test-run-nixos-test-niks3> server # [ 0.211432] Transient Scheduler Attacks: Vulnerable: No microcode vm-test-run-nixos-test-niks3> server # [ 0.212432] Spectre V2 : Mitigation: Enhanced / Automatic IBRS vm-test-run-nixos-test-niks3> server # [ 0.214255] Speculative Return Stack Overflow: Mitigation: Safe RET vm-test-run-nixos-test-niks3> server # [ 0.215206] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization vm-test-run-nixos-test-niks3> server # [ 0.216440] Spectre V2 : Enabling IBPB for BPF vm-test-run-nixos-test-niks3> server # [ 0.217969] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier vm-test-run-nixos-test-niks3> server # [ 0.218433] active return thunk: srso_alias_return_thunk vm-test-run-nixos-test-niks3> server # [ 0.220094] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' vm-test-run-nixos-test-niks3> server # [ 0.221327] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' vm-test-run-nixos-test-niks3> server # [ 0.222178] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' vm-test-run-nixos-test-niks3> server # [ 0.223176] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' vm-test-run-nixos-test-niks3> server # [ 0.224188] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' vm-test-run-nixos-test-niks3> server # [ 0.225184] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' vm-test-run-nixos-test-niks3> server # [ 0.226240] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' vm-test-run-nixos-test-niks3> builder # [ 0.260682] Freeing SMP alternatives memory: 44K vm-test-run-nixos-test-niks3> server # [ 0.227432] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 vm-test-run-nixos-test-niks3> builder # [ 0.261071] pid_max: default: 32768 minimum: 301 vm-test-run-nixos-test-niks3> server # [ 0.228432] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 vm-test-run-nixos-test-niks3> builder # [ 0.262177] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-nixos-test-niks3> server # [ 0.229432] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 vm-test-run-nixos-test-niks3> builder # [ 0.263173] landlock: Up and running. vm-test-run-nixos-test-niks3> builder # [ 0.264068] Yama: becoming mindful. vm-test-run-nixos-test-niks3> server # [ 0.230432] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 vm-test-run-nixos-test-niks3> builder # [ 0.264912] LSM support for eBPF active vm-test-run-nixos-test-niks3> server # [ 0.231432] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 vm-test-run-nixos-test-niks3> builder # [ 0.265648] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.232371] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. vm-test-run-nixos-test-niks3> builder # [ 0.266089] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.269213] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) vm-test-run-nixos-test-niks3> builder # [ 0.270661] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-nixos-test-niks3> builder # [ 0.271076] ... version: 2 vm-test-run-nixos-test-niks3> builder # [ 0.271747] ... bit width: 48 vm-test-run-nixos-test-niks3> builder # [ 0.272069] ... generic counters: 6 vm-test-run-nixos-test-niks3> builder # [ 0.272802] ... generic bitmap: 000000000000003f vm-test-run-nixos-test-niks3> builder # [ 0.273070] ... fixed-purpose counters: 0 vm-test-run-nixos-test-niks3> builder # [ 0.273741] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-nixos-test-niks3> builder # [ 0.274069] ... value mask: 0000ffffffffffff vm-test-run-nixos-test-niks3> builder # [ 0.274948] ... max period: 00007fffffffffff vm-test-run-nixos-test-niks3> builder # [ 0.275743] ... global_ctrl mask: 000000000000003f vm-test-run-nixos-test-niks3> builder # [ 0.276190] signal: max sigframe size: 3376 vm-test-run-nixos-test-niks3> builder # [ 0.277014] rcu: Hierarchical SRCU implementation. vm-test-run-nixos-test-niks3> builder # [ 0.277668] rcu: Max phase no-delay instances is 400. vm-test-run-nixos-test-niks3> builder # [ 0.282694] smp: Bringing up secondary CPUs ... vm-test-run-nixos-test-niks3> builder # [ 0.283083] smp: Brought up 1 node, 1 CPU vm-test-run-nixos-test-niks3> builder # [ 0.283763] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) vm-test-run-nixos-test-niks3> builder # [ 0.284277] Memory: 941024K/1048024K available (17263K kernel code, 2728K rwdata, 13660K rodata, 3656K init, 2968K bss, 99608K reserved, 0K cma-reserved) vm-test-run-nixos-test-niks3> builder # [ 0.285354] devtmpfs: initialized vm-test-run-nixos-test-niks3> builder # [ 0.286125] x86/mm: Memory block size: 128MB vm-test-run-nixos-test-niks3> builder # [ 0.287813] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.288969] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). vm-test-run-nixos-test-niks3> builder # [ 0.290158] pinctrl core: initialized pinctrl subsystem vm-test-run-nixos-test-niks3> builder # [ 0.291265] PM: RTC time: 10:20:40, date: 2026-10-01 vm-test-run-nixos-test-niks3> server # [ 0.267448] Freeing SMP alternatives memory: 44K vm-test-run-nixos-test-niks3> server # [ 0.268436] pid_max: default: 32768 minimum: 301 vm-test-run-nixos-test-niks3> builder # [ 0.295531] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-nixos-test-niks3> server # [ 0.269275] LSM: initializing lsm=capability,landlock,yama,bpf,ima vm-test-run-nixos-test-niks3> server # [ 0.270448] landlock: Up and running. vm-test-run-nixos-test-niks3> builder # [ 0.296450] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations vm-test-run-nixos-test-niks3> server # [ 0.271065] Yama: becoming mindful. vm-test-run-nixos-test-niks3> server # [ 0.271658] LSM support for eBPF active vm-test-run-nixos-test-niks3> builder # [ 0.297088] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-nixos-test-niks3> server # [ 0.272521] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.298308] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-nixos-test-niks3> server # [ 0.273455] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.299102] audit: initializing netlink subsys (disabled) vm-test-run-nixos-test-niks3> builder # [ 0.300496] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-nixos-test-niks3> builder # [ 0.300499] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-nixos-test-niks3> server # [ 0.276238] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) vm-test-run-nixos-test-niks3> builder # [ 0.301071] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-nixos-test-niks3> server # [ 0.277003] Performance Events: Fam17h+ core perfctr, AMD PMU driver. vm-test-run-nixos-test-niks3> builder # [ 0.302045] thermal_sys: Registered thermal governor 'user_space' vm-test-run-nixos-test-niks3> server # [ 0.277437] ... version: 2 vm-test-run-nixos-test-niks3> server # [ 0.278133] ... bit width: 48 vm-test-run-nixos-test-niks3> builder # [ 0.302873] audit: type=2000 audit(1790850041.456:1): state=initialized audit_enabled=0 res=1 vm-test-run-nixos-test-niks3> server # [ 0.278435] ... generic counters: 6 vm-test-run-nixos-test-niks3> builder # [ 0.305073] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-nixos-test-niks3> server # [ 0.279119] ... generic bitmap: 000000000000003f vm-test-run-nixos-test-niks3> builder # [ 0.305092] cpuidle: using governor menu vm-test-run-nixos-test-niks3> server # [ 0.279444] ... fixed-purpose counters: 0 vm-test-run-nixos-test-niks3> server # [ 0.280138] ... fixed-purpose bitmap: 0000000000000000 vm-test-run-nixos-test-niks3> builder # [ 0.307358] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-nixos-test-niks3> server # [ 0.280434] ... value mask: 0000ffffffffffff vm-test-run-nixos-test-niks3> server # [ 0.281306] ... max period: 00007fffffffffff vm-test-run-nixos-test-niks3> server # [ 0.282095] ... global_ctrl mask: 000000000000003f vm-test-run-nixos-test-niks3> builder # [ 0.308901] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] vm-test-run-nixos-test-niks3> server # [ 0.282550] signal: max sigframe size: 3376 vm-test-run-nixos-test-niks3> builder # [ 0.310072] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry vm-test-run-nixos-test-niks3> server # [ 0.283335] rcu: Hierarchical SRCU implementation. vm-test-run-nixos-test-niks3> builder # [ 0.311083] PCI: Using configuration type 1 for base access vm-test-run-nixos-test-niks3> server # [ 0.284009] rcu: Max phase no-delay instances is 400. vm-test-run-nixos-test-niks3> builder # [ 0.312237] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-nixos-test-niks3> server # [ 0.289028] smp: Bringing up secondary CPUs ... vm-test-run-nixos-test-niks3> server # [ 0.289448] smp: Brought up 1 node, 1 CPU vm-test-run-nixos-test-niks3> server # [ 0.290114] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) vm-test-run-nixos-test-niks3> builder # [ 0.317400] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-nixos-test-niks3> builder # [ 0.318070] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-nixos-test-niks3> builder # [ 0.319070] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-nixos-test-niks3> server # [ 0.290624] Memory: 941032K/1048024K available (17263K kernel code, 2728K rwdata, 13660K rodata, 3656K init, 2968K bss, 99600K reserved, 0K cma-reserved) vm-test-run-nixos-test-niks3> server # [ 0.291696] devtmpfs: initialized vm-test-run-nixos-test-niks3> server # [ 0.292558] x86/mm: Memory block size: 128MB vm-test-run-nixos-test-niks3> server # [ 0.294254] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.295383] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). vm-test-run-nixos-test-niks3> server # [ 0.296536] pinctrl core: initialized pinctrl subsystem vm-test-run-nixos-test-niks3> builder # [ 0.326071] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-nixos-test-niks3> server # [ 0.297673] PM: RTC time: 10:20:40, date: 2026-10-01 vm-test-run-nixos-test-niks3> server # [ 0.301497] NET: Registered PF_NETLINK/PF_ROUTE protocol family vm-test-run-nixos-test-niks3> server # [ 0.302786] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations vm-test-run-nixos-test-niks3> server # [ 0.303469] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations vm-test-run-nixos-test-niks3> builder # [ 0.334479] ACPI: Added _OSI(Module Device) vm-test-run-nixos-test-niks3> builder # [ 0.335071] ACPI: Added _OSI(Processor Device) vm-test-run-nixos-test-niks3> server # [ 0.304590] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations vm-test-run-nixos-test-niks3> builder # [ 0.335802] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-nixos-test-niks3> server # [ 0.305444] audit: initializing netlink subsys (disabled) vm-test-run-nixos-test-niks3> server # [ 0.306613] thermal_sys: Registered thermal governor 'fair_share' vm-test-run-nixos-test-niks3> server # [ 0.306616] thermal_sys: Registered thermal governor 'bang_bang' vm-test-run-nixos-test-niks3> server # [ 0.307436] thermal_sys: Registered thermal governor 'step_wise' vm-test-run-nixos-test-niks3> server # [ 0.308388] thermal_sys: Registered thermal governor 'user_space' vm-test-run-nixos-test-niks3> server # [ 0.309167] audit: type=2000 audit(1790850041.487:1): state=initialized audit_enabled=0 res=1 vm-test-run-nixos-test-niks3> server # [ 0.310437] thermal_sys: Registered thermal governor 'power_allocator' vm-test-run-nixos-test-niks3> server # [ 0.310452] cpuidle: using governor menu vm-test-run-nixos-test-niks3> server # [ 0.312666] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 vm-test-run-nixos-test-niks3> builder # [ 0.344655] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-nixos-test-niks3> server # [ 0.313684] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] vm-test-run-nixos-test-niks3> server # [ 0.314438] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry vm-test-run-nixos-test-niks3> server # [ 0.315447] PCI: Using configuration type 1 for base access vm-test-run-nixos-test-niks3> builder # [ 0.348326] ACPI: Interpreter enabled vm-test-run-nixos-test-niks3> builder # [ 0.349013] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-nixos-test-niks3> server # [ 0.316562] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. vm-test-run-nixos-test-niks3> builder # [ 0.349585] ACPI: Using IOAPIC for interrupt routing vm-test-run-nixos-test-niks3> builder # [ 0.350103] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-nixos-test-niks3> builder # [ 0.351070] PCI: Using E820 reservations for host bridge windows vm-test-run-nixos-test-niks3> builder # [ 0.354208] ACPI: Enabled 2 GPEs in block 00 to 3F vm-test-run-nixos-test-niks3> server # [ 0.323700] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages vm-test-run-nixos-test-niks3> server # [ 0.324436] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page vm-test-run-nixos-test-niks3> server # [ 0.329436] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages vm-test-run-nixos-test-niks3> server # [ 0.330435] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page vm-test-run-nixos-test-niks3> builder # [ 0.362869] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-nixos-test-niks3> builder # [ 0.363861] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-nixos-test-niks3> builder # [ 0.365554] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] vm-test-run-nixos-test-niks3> builder # [ 0.366195] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] vm-test-run-nixos-test-niks3> builder # [ 0.367453] PCI host bridge to bus 0000:00 vm-test-run-nixos-test-niks3> builder # [ 0.368074] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-nixos-test-niks3> builder # [ 0.369071] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-nixos-test-niks3> server # [ 0.339088] ACPI: Added _OSI(Module Device) vm-test-run-nixos-test-niks3> server # [ 0.339437] ACPI: Added _OSI(Processor Device) vm-test-run-nixos-test-niks3> builder # [ 0.370070] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-nixos-test-niks3> server # [ 0.340172] ACPI: Added _OSI(Processor Aggregator Device) vm-test-run-nixos-test-niks3> builder # [ 0.371070] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] vm-test-run-nixos-test-niks3> builder # [ 0.372092] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-nixos-test-niks3> builder # [ 0.373070] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] vm-test-run-nixos-test-niks3> builder # [ 0.374073] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-nixos-test-niks3> builder # [ 0.375219] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.347011] ACPI: 1 ACPI AML tables successfully acquired and loaded vm-test-run-nixos-test-niks3> builder # [ 0.376579] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.350346] ACPI: Interpreter enabled vm-test-run-nixos-test-niks3> server # [ 0.350940] ACPI: PM: (supports S0 S3 S4 S5) vm-test-run-nixos-test-niks3> server # [ 0.351435] ACPI: Using IOAPIC for interrupt routing vm-test-run-nixos-test-niks3> server # [ 0.352340] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug vm-test-run-nixos-test-niks3> builder # [ 0.379196] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-nixos-test-niks3> builder # [ 0.380091] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-nixos-test-niks3> server # [ 0.357435] PCI: Using E820 reservations for host bridge windows vm-test-run-nixos-test-niks3> server # [ 0.358569] ACPI: Enabled 2 GPEs in block 00 to 3F vm-test-run-nixos-test-niks3> builder # [ 0.381092] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-nixos-test-niks3> builder # [ 0.382384] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-nixos-test-niks3> builder # [ 0.383783] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.387109] pci 0000:00:02.0: BAR 0 [io 0xc100-0xc11f] vm-test-run-nixos-test-niks3> builder # [ 0.387997] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-nixos-test-niks3> server # [ 0.367325] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) vm-test-run-nixos-test-niks3> builder # [ 0.388848] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.389950] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-nixos-test-niks3> server # [ 0.368901] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] vm-test-run-nixos-test-niks3> server # [ 0.369514] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] vm-test-run-nixos-test-niks3> builder # [ 0.391491] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.370557] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] vm-test-run-nixos-test-niks3> server # [ 0.371802] PCI host bridge to bus 0000:00 vm-test-run-nixos-test-niks3> builder # [ 0.393107] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] vm-test-run-nixos-test-niks3> server # [ 0.372439] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] vm-test-run-nixos-test-niks3> builder # [ 0.393995] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-nixos-test-niks3> server # [ 0.373435] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] vm-test-run-nixos-test-niks3> builder # [ 0.394855] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.374434] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] vm-test-run-nixos-test-niks3> server # [ 0.375435] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] vm-test-run-nixos-test-niks3> builder # [ 0.396585] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.376435] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] vm-test-run-nixos-test-niks3> server # [ 0.377435] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] vm-test-run-nixos-test-niks3> server # [ 0.378435] pci_bus 0000:00: root bus resource [bus 00-ff] vm-test-run-nixos-test-niks3> builder # [ 0.399108] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-nixos-test-niks3> server # [ 0.379471] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.400014] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-nixos-test-niks3> builder # [ 0.400862] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.380892] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.402501] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.404106] pci 0000:00:05.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-nixos-test-niks3> builder # [ 0.405011] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-nixos-test-niks3> builder # [ 0.405883] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.407077] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-nixos-test-niks3> server # [ 0.383524] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] vm-test-run-nixos-test-niks3> builder # [ 0.408606] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.384518] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] vm-test-run-nixos-test-niks3> server # [ 0.385498] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] vm-test-run-nixos-test-niks3> builder # [ 0.410083] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-nixos-test-niks3> builder # [ 0.411092] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.386772] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] vm-test-run-nixos-test-niks3> builder # [ 0.412660] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.388166] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.414083] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-nixos-test-niks3> server # [ 0.390473] pci 0000:00:02.0: BAR 0 [io 0xc100-0xc11f] vm-test-run-nixos-test-niks3> builder # [ 0.415092] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.391333] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] vm-test-run-nixos-test-niks3> server # [ 0.392195] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.416717] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.392440] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] vm-test-run-nixos-test-niks3> builder # [ 0.418083] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-nixos-test-niks3> server # [ 0.393970] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.419080] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.395452] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] vm-test-run-nixos-test-niks3> builder # [ 0.420605] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.396343] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] vm-test-run-nixos-test-niks3> server # [ 0.397233] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.422082] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-nixos-test-niks3> builder # [ 0.423092] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.398903] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.424616] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.401443] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] vm-test-run-nixos-test-niks3> builder # [ 0.426125] pci 0000:00:0a.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-nixos-test-niks3> server # [ 0.402331] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] vm-test-run-nixos-test-niks3> builder # [ 0.427077] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-nixos-test-niks3> server # [ 0.403180] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.428069] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.403997] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.429624] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.405450] pci 0000:00:05.0: BAR 0 [io 0xc140-0xc15f] vm-test-run-nixos-test-niks3> server # [ 0.406325] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] vm-test-run-nixos-test-niks3> builder # [ 0.431111] pci 0000:00:0b.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-nixos-test-niks3> builder # [ 0.431993] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-nixos-test-niks3> server # [ 0.407218] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.432853] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.408441] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref] vm-test-run-nixos-test-niks3> builder # [ 0.434525] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.409967] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.435850] pci 0000:00:1d.0: BAR 4 [io 0xc180-0xc19f] vm-test-run-nixos-test-niks3> server # [ 0.411447] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] vm-test-run-nixos-test-niks3> server # [ 0.412457] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.436273] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.414012] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.437779] pci 0000:00:1d.1: BAR 4 [io 0xc1a0-0xc1bf] vm-test-run-nixos-test-niks3> builder # [ 0.438286] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.415447] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] vm-test-run-nixos-test-niks3> builder # [ 0.439725] pci 0000:00:1d.2: BAR 4 [io 0xc1c0-0xc1df] vm-test-run-nixos-test-niks3> server # [ 0.416457] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.418078] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.419308] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] vm-test-run-nixos-test-niks3> server # [ 0.420245] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.421920] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.423309] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] vm-test-run-nixos-test-niks3> server # [ 0.424450] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] vm-test-run-nixos-test-niks3> server # [ 0.426006] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.440324] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.427477] pci 0000:00:0a.0: BAR 0 [io 0xc080-0xc0bf] vm-test-run-nixos-test-niks3> builder # [ 0.442717] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] vm-test-run-nixos-test-niks3> server # [ 0.428337] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] vm-test-run-nixos-test-niks3> server # [ 0.429212] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.443349] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.444388] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO vm-test-run-nixos-test-niks3> server # [ 0.430859] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.445317] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.433020] pci 0000:00:0b.0: BAR 0 [io 0xc160-0xc17f] vm-test-run-nixos-test-niks3> builder # [ 0.447056] pci 0000:00:1f.2: BAR 4 [io 0xc1e0-0xc1ff] vm-test-run-nixos-test-niks3> server # [ 0.433442] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] vm-test-run-nixos-test-niks3> builder # [ 0.447753] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] vm-test-run-nixos-test-niks3> server # [ 0.434450] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] vm-test-run-nixos-test-niks3> builder # [ 0.448394] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.435992] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.437009] pci 0000:00:1d.0: BAR 4 [io 0xc180-0xc19f] vm-test-run-nixos-test-niks3> builder # [ 0.449724] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] vm-test-run-nixos-test-niks3> server # [ 0.437669] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-nixos-test-niks3> server # [ 0.439011] pci 0000:00:1d.1: BAR 4 [io 0xc1a0-0xc1bf] vm-test-run-nixos-test-niks3> builder # [ 0.453306] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-nixos-test-niks3> server # [ 0.439627] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.454199] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-nixos-test-niks3> server # [ 0.440989] pci 0000:00:1d.2: BAR 4 [io 0xc1c0-0xc1df] vm-test-run-nixos-test-niks3> builder # [ 0.455170] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-nixos-test-niks3> builder # [ 0.456168] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-nixos-test-niks3> builder # [ 0.457166] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 vm-test-run-nixos-test-niks3> builder # [ 0.458170] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 vm-test-run-nixos-test-niks3> builder # [ 0.459171] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 vm-test-run-nixos-test-niks3> builder # [ 0.460177] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 vm-test-run-nixos-test-niks3> builder # [ 0.461110] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 vm-test-run-nixos-test-niks3> builder # [ 0.462085] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 vm-test-run-nixos-test-niks3> builder # [ 0.463082] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 vm-test-run-nixos-test-niks3> builder # [ 0.464085] ACPI: PCI: Interrupt link GSID configured for IRQ 19 vm-test-run-nixos-test-niks3> builder # [ 0.465084] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 vm-test-run-nixos-test-niks3> builder # [ 0.466083] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 vm-test-run-nixos-test-niks3> server # [ 0.441661] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.467081] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 vm-test-run-nixos-test-niks3> server # [ 0.443943] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] vm-test-run-nixos-test-niks3> builder # [ 0.468082] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 vm-test-run-nixos-test-niks3> server # [ 0.444735] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.470143] iommu: Default domain type: Translated vm-test-run-nixos-test-niks3> builder # [ 0.470991] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-nixos-test-niks3> server # [ 0.445718] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO vm-test-run-nixos-test-niks3> builder # [ 0.472138] ACPI: bus type USB registered vm-test-run-nixos-test-niks3> builder # [ 0.472945] usbcore: registered new interface driver usbfs vm-test-run-nixos-test-niks3> server # [ 0.446709] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.473811] usbcore: registered new interface driver hub vm-test-run-nixos-test-niks3> server # [ 0.448323] pci 0000:00:1f.2: BAR 4 [io 0xc1e0-0xc1ff] vm-test-run-nixos-test-niks3> builder # [ 0.474088] usbcore: registered new device driver usb vm-test-run-nixos-test-niks3> server # [ 0.449085] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] vm-test-run-nixos-test-niks3> builder # [ 0.475894] NetLabel: Initializing vm-test-run-nixos-test-niks3> builder # [ 0.476547] NetLabel: domain hash size = 128 vm-test-run-nixos-test-niks3> server # [ 0.449750] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint vm-test-run-nixos-test-niks3> builder # [ 0.477070] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-nixos-test-niks3> server # [ 0.451029] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] vm-test-run-nixos-test-niks3> builder # [ 0.478095] NetLabel: unlabeled traffic allowed by default vm-test-run-nixos-test-niks3> builder # [ 0.479043] PCI: Using ACPI for IRQ routing vm-test-run-nixos-test-niks3> server # [ 0.454854] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 vm-test-run-nixos-test-niks3> server # [ 0.455551] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 vm-test-run-nixos-test-niks3> server # [ 0.456534] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 vm-test-run-nixos-test-niks3> server # [ 0.457536] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 vm-test-run-nixos-test-niks3> server # [ 0.458534] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 vm-test-run-nixos-test-niks3> server # [ 0.459532] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 vm-test-run-nixos-test-niks3> server # [ 0.460535] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 vm-test-run-nixos-test-niks3> server # [ 0.461530] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 vm-test-run-nixos-test-niks3> server # [ 0.462492] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 vm-test-run-nixos-test-niks3> server # [ 0.463452] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 vm-test-run-nixos-test-niks3> server # [ 0.464451] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 vm-test-run-nixos-test-niks3> server # [ 0.465450] ACPI: PCI: Interrupt link GSID configured for IRQ 19 vm-test-run-nixos-test-niks3> server # [ 0.466456] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 vm-test-run-nixos-test-niks3> server # [ 0.467448] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 vm-test-run-nixos-test-niks3> server # [ 0.468451] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 vm-test-run-nixos-test-niks3> server # [ 0.469447] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 vm-test-run-nixos-test-niks3> server # [ 0.471522] iommu: Default domain type: Translated vm-test-run-nixos-test-niks3> server # [ 0.472355] iommu: DMA domain TLB invalidation policy: lazy mode vm-test-run-nixos-test-niks3> server # [ 0.473509] ACPI: bus type USB registered vm-test-run-nixos-test-niks3> server # [ 0.474283] usbcore: registered new interface driver usbfs vm-test-run-nixos-test-niks3> server # [ 0.475146] usbcore: registered new interface driver hub vm-test-run-nixos-test-niks3> server # [ 0.475454] usbcore: registered new device driver usb vm-test-run-nixos-test-niks3> server # [ 0.477208] NetLabel: Initializing vm-test-run-nixos-test-niks3> server # [ 0.477441] NetLabel: domain hash size = 128 vm-test-run-nixos-test-niks3> server # [ 0.478194] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO vm-test-run-nixos-test-niks3> server # [ 0.478470] NetLabel: unlabeled traffic allowed by default vm-test-run-nixos-test-niks3> server # [ 0.479402] PCI: Using ACPI for IRQ routing vm-test-run-nixos-test-niks3> builder # [ 0.523553] pci 0000:00:01.0: vgaarb: setting as boot VGA device vm-test-run-nixos-test-niks3> builder # [ 0.524066] pci 0000:00:01.0: vgaarb: bridge control possible vm-test-run-nixos-test-niks3> builder # [ 0.524066] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-nixos-test-niks3> builder # [ 0.524075] vgaarb: loaded vm-test-run-nixos-test-niks3> builder # [ 0.524865] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-nixos-test-niks3> builder # [ 0.525734] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-nixos-test-niks3> builder # [ 0.529162] clocksource: Switched to clocksource kvm-clock vm-test-run-nixos-test-niks3> builder # [ 0.532845] VFS: Disk quotas dquot_6.6.0 vm-test-run-nixos-test-niks3> builder # [ 0.533601] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-nixos-test-niks3> builder # [ 0.534999] pnp: PnP ACPI init vm-test-run-nixos-test-niks3> builder # [ 0.535818] ACPI: IRQ 4 override to edge(!), high(!) vm-test-run-nixos-test-niks3> builder # [ 0.536844] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved vm-test-run-nixos-test-niks3> builder # [ 0.538426] pnp: PnP ACPI: found 5 devices vm-test-run-nixos-test-niks3> builder # [ 0.546027] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-nixos-test-niks3> builder # [ 0.547557] clocksource: Switched to clocksource acpi_pm vm-test-run-nixos-test-niks3> builder # [ 0.548560] NET: Registered PF_INET protocol family vm-test-run-nixos-test-niks3> builder # [ 0.549625] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.523069] pci 0000:00:01.0: vgaarb: setting as boot VGA device vm-test-run-nixos-test-niks3> server # [ 0.523431] pci 0000:00:01.0: vgaarb: bridge control possible vm-test-run-nixos-test-niks3> server # [ 0.523431] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none vm-test-run-nixos-test-niks3> server # [ 0.523439] vgaarb: loaded vm-test-run-nixos-test-niks3> server # [ 0.524241] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 vm-test-run-nixos-test-niks3> server # [ 0.525070] hpet0: 3 comparators, 64-bit 100.000000 MHz counter vm-test-run-nixos-test-niks3> server # [ 0.528524] clocksource: Switched to clocksource kvm-clock vm-test-run-nixos-test-niks3> server # [ 0.532207] VFS: Disk quotas dquot_6.6.0 vm-test-run-nixos-test-niks3> server # [ 0.532966] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) vm-test-run-nixos-test-niks3> server # [ 0.534375] pnp: PnP ACPI init vm-test-run-nixos-test-niks3> server # [ 0.535177] ACPI: IRQ 4 override to edge(!), high(!) vm-test-run-nixos-test-niks3> builder # [ 0.567056] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.536205] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved vm-test-run-nixos-test-niks3> builder # [ 0.568614] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.537778] pnp: PnP ACPI: found 5 devices vm-test-run-nixos-test-niks3> builder # [ 0.569972] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.571322] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.572597] TCP: Hash tables configured (established 8192 bind 8192) vm-test-run-nixos-test-niks3> builder # [ 0.573739] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.575111] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.576273] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.577533] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-nixos-test-niks3> server # [ 0.545417] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns vm-test-run-nixos-test-niks3> builder # [ 0.578552] NET: Registered PF_XDP protocol family vm-test-run-nixos-test-niks3> server # [ 0.546897] clocksource: Switched to clocksource acpi_pm vm-test-run-nixos-test-niks3> builder # [ 0.579391] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-nixos-test-niks3> server # [ 0.547907] NET: Registered PF_INET protocol family vm-test-run-nixos-test-niks3> builder # [ 0.580397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-nixos-test-niks3> server # [ 0.548974] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) vm-test-run-nixos-test-niks3> builder # [ 0.581411] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-nixos-test-niks3> builder # [ 0.582494] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] vm-test-run-nixos-test-niks3> builder # [ 0.583653] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] vm-test-run-nixos-test-niks3> builder # [ 0.584818] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] vm-test-run-nixos-test-niks3> builder # [ 0.586609] ACPI: \_SB_.GSIA: Enabled at IRQ 16 vm-test-run-nixos-test-niks3> builder # [ 0.589038] ACPI: \_SB_.GSIB: Enabled at IRQ 17 vm-test-run-nixos-test-niks3> builder # [ 0.591095] ACPI: \_SB_.GSIC: Enabled at IRQ 18 vm-test-run-nixos-test-niks3> builder # [ 0.593068] ACPI: \_SB_.GSID: Enabled at IRQ 19 vm-test-run-nixos-test-niks3> builder # [ 0.595323] PCI: CLS 0 bytes, default 64 vm-test-run-nixos-test-niks3> builder # [ 0.596239] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns vm-test-run-nixos-test-niks3> builder # [ 0.598049] Trying to unpack rootfs image as initramfs... vm-test-run-nixos-test-niks3> server # [ 0.567009] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.568620] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.569996] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.571391] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.572679] TCP: Hash tables configured (established 8192 bind 8192) vm-test-run-nixos-test-niks3> server # [ 0.573843] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.575256] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.576411] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) vm-test-run-nixos-test-niks3> server # [ 0.577680] NET: Registered PF_UNIX/PF_LOCAL protocol family vm-test-run-nixos-test-niks3> server # [ 0.578700] NET: Registered PF_XDP protocol family vm-test-run-nixos-test-niks3> server # [ 0.579600] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] vm-test-run-nixos-test-niks3> server # [ 0.580655] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] vm-test-run-nixos-test-niks3> server # [ 0.581719] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] vm-test-run-nixos-test-niks3> server # [ 0.582871] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] vm-test-run-nixos-test-niks3> server # [ 0.584031] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] vm-test-run-nixos-test-niks3> server # [ 0.585186] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] vm-test-run-nixos-test-niks3> server # [ 0.586961] ACPI: \_SB_.GSIA: Enabled at IRQ 16 vm-test-run-nixos-test-niks3> server # [ 0.589271] ACPI: \_SB_.GSIB: Enabled at IRQ 17 vm-test-run-nixos-test-niks3> server # [ 0.591596] ACPI: \_SB_.GSIC: Enabled at IRQ 18 vm-test-run-nixos-test-niks3> server # [ 0.593626] ACPI: \_SB_.GSID: Enabled at IRQ 19 vm-test-run-nixos-test-niks3> server # [ 0.595436] PCI: CLS 0 bytes, default 64 vm-test-run-nixos-test-niks3> server # [ 0.596433] Trying to unpack rootfs image as initramfs... vm-test-run-nixos-test-niks3> server # [ 0.602397] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns vm-test-run-nixos-test-niks3> builder # [ 0.642639] Initialise system trusted keyrings vm-test-run-nixos-test-niks3> builder # [ 0.645536] workingset: timestamp_bits=40 max_order=18 bucket_order=0 vm-test-run-nixos-test-niks3> builder # [ 0.666318] Key type asymmetric registered vm-test-run-nixos-test-niks3> builder # [ 0.670393] Asymmetric key parser 'x509' registered vm-test-run-nixos-test-niks3> builder # [ 0.671258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-nixos-test-niks3> builder # [ 0.674557] io scheduler mq-deadline registered vm-test-run-nixos-test-niks3> builder # [ 0.675352] io scheduler kyber registered vm-test-run-nixos-test-niks3> server # [ 0.643525] Initialise system trusted keyrings vm-test-run-nixos-test-niks3> builder # [ 0.677991] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-nixos-test-niks3> server # [ 0.646510] workingset: timestamp_bits=40 max_order=18 bucket_order=0 vm-test-run-nixos-test-niks3> builder # [ 0.679317] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-nixos-test-niks3> builder # [ 0.685189] Linux agpgart interface v0.103 vm-test-run-nixos-test-niks3> builder # [ 0.685996] ACPI: bus type drm_connector registered vm-test-run-nixos-test-niks3> builder # [ 0.690608] usbcore: registered new interface driver usbserial_generic vm-test-run-nixos-test-niks3> builder # [ 0.691755] usbserial: USB Serial support registered for generic vm-test-run-nixos-test-niks3> builder # [ 0.694391] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-nixos-test-niks3> builder # [ 0.694391] Please enable it if your BIOS has the CPPC option. vm-test-run-nixos-test-niks3> builder # [ 0.696698] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-nixos-test-niks3> builder # [ 0.701537] drop_monitor: Initializing network drop monitor service vm-test-run-nixos-test-niks3> server # [ 0.670350] Key type asymmetric registered vm-test-run-nixos-test-niks3> builder # [ 0.702775] NET: Registered PF_INET6 protocol family vm-test-run-nixos-test-niks3> server # [ 0.671078] Asymmetric key parser 'x509' registered vm-test-run-nixos-test-niks3> server # [ 0.671962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) vm-test-run-nixos-test-niks3> builder # [ 0.705898] Segment Routing with IPv6 vm-test-run-nixos-test-niks3> server # [ 0.674447] io scheduler mq-deadline registered vm-test-run-nixos-test-niks3> server # [ 0.675187] io scheduler kyber registered vm-test-run-nixos-test-niks3> builder # [ 0.709409] In-situ OAM (IOAM) with IPv6 vm-test-run-nixos-test-niks3> builder # [ 0.710516] IPI shorthand broadcast: enabled vm-test-run-nixos-test-niks3> server # [ 0.679526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled vm-test-run-nixos-test-niks3> server # [ 0.680839] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A vm-test-run-nixos-test-niks3> server # [ 0.686295] Linux agpgart interface v0.103 vm-test-run-nixos-test-niks3> server # [ 0.687091] ACPI: bus type drm_connector registered vm-test-run-nixos-test-niks3> builder # [ 0.718892] sched_clock: Marking stable (583014368, 135356524)->(794710746, -76339854) vm-test-run-nixos-test-niks3> builder # [ 0.723563] registered taskstats version 1 vm-test-run-nixos-test-niks3> server # [ 0.691556] usbcore: registered new interface driver usbserial_generic vm-test-run-nixos-test-niks3> builder # [ 0.724533] Loading compiled-in X.509 certificates vm-test-run-nixos-test-niks3> server # [ 0.692670] usbserial: USB Serial support registered for generic vm-test-run-nixos-test-niks3> server # [ 0.695342] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. vm-test-run-nixos-test-niks3> server # [ 0.695342] Please enable it if your BIOS has the CPPC option. vm-test-run-nixos-test-niks3> server # [ 0.697714] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled vm-test-run-nixos-test-niks3> server # [ 0.701517] drop_monitor: Initializing network drop monitor service vm-test-run-nixos-test-niks3> server # [ 0.702787] NET: Registered PF_INET6 protocol family vm-test-run-nixos-test-niks3> server # [ 0.707901] Segment Routing with IPv6 vm-test-run-nixos-test-niks3> server # [ 0.708632] In-situ OAM (IOAM) with IPv6 vm-test-run-nixos-test-niks3> builder # [ 0.743378] Demotion targets for Node 0: null vm-test-run-nixos-test-niks3> server # [ 0.711738] IPI shorthand broadcast: enabled vm-test-run-nixos-test-niks3> builder # [ 0.744260] Key type .fscrypt registered vm-test-run-nixos-test-niks3> builder # [ 0.747375] Key type fscrypt-provisioning registered vm-test-run-nixos-test-niks3> builder # [ 0.748334] ima: No TPM chip found, activating TPM-bypass! vm-test-run-nixos-test-niks3> builder # [ 0.749315] ima: Allocated hash algorithm: sha1 vm-test-run-nixos-test-niks3> builder # [ 0.751406] ima: No architecture policies found vm-test-run-nixos-test-niks3> server # [ 0.720169] sched_clock: Marking stable (577015867, 142303458)->(795111045, -75791720) vm-test-run-nixos-test-niks3> builder # [ 0.753384] PM: Magic number: 14:429:324 vm-test-run-nixos-test-niks3> builder # [ 0.754088] tty tty49: hash matches vm-test-run-nixos-test-niks3> builder # [ 0.754756] platform PNP0B00:00: hash matches vm-test-run-nixos-test-niks3> server # [ 0.723535] registered taskstats version 1 vm-test-run-nixos-test-niks3> server # [ 0.724522] Loading compiled-in X.509 certificates vm-test-run-nixos-test-niks3> builder # [ 0.757388] acpi PNP0B00:00: hash matches vm-test-run-nixos-test-niks3> builder # [ 0.759015] RAS: Correctable Errors collector initialized. vm-test-run-nixos-test-niks3> builder # [ 0.768057] clk: Disabling unused clocks vm-test-run-nixos-test-niks3> builder # [ 0.771406] PM: genpd: Disabling unused power domains vm-test-run-nixos-test-niks3> server # [ 0.743509] Demotion targets for Node 0: null vm-test-run-nixos-test-niks3> server # [ 0.746373] Key type .fscrypt registered vm-test-run-nixos-test-niks3> server # [ 0.747110] Key type fscrypt-provisioning registered vm-test-run-nixos-test-niks3> server # [ 0.748116] ima: No TPM chip found, activating TPM-bypass! vm-test-run-nixos-test-niks3> server # [ 0.750333] ima: Allocated hash algorithm: sha1 vm-test-run-nixos-test-niks3> server # [ 0.751176] ima: No architecture policies found vm-test-run-nixos-test-niks3> server # [ 0.753339] PM: Magic number: 14:429:324 vm-test-run-nixos-test-niks3> server # [ 0.754106] tty tty49: hash matches vm-test-run-nixos-test-niks3> server # [ 0.754791] platform PNP0B00:00: hash matches vm-test-run-nixos-test-niks3> server # [ 0.758335] acpi PNP0B00:00: hash matches vm-test-run-nixos-test-niks3> server # [ 0.760132] RAS: Correctable Errors collector initialized. vm-test-run-nixos-test-niks3> server # [ 0.769154] clk: Disabling unused clocks vm-test-run-nixos-test-niks3> server # [ 0.772352] PM: genpd: Disabling unused power domains vm-test-run-nixos-test-niks3> builder # [ 0.938928] Freeing initrd memory: 29084K vm-test-run-nixos-test-niks3> builder # [ 0.942569] Freeing unused decrypted memory: 2028K vm-test-run-nixos-test-niks3> builder # [ 0.945330] Freeing unused kernel image (initmem) memory: 3656K vm-test-run-nixos-test-niks3> builder # [ 0.946478] Write protecting the kernel read-only data: 32768k vm-test-run-nixos-test-niks3> builder # [ 0.948377] Freeing unused kernel image (text/rodata gap) memory: 1168K vm-test-run-nixos-test-niks3> builder # [ 0.949878] Freeing unused kernel image (rodata/data gap) memory: 676K vm-test-run-nixos-test-niks3> server # [ 0.948103] Freeing initrd memory: 29076K vm-test-run-nixos-test-niks3> server # [ 0.951455] Freeing unused decrypted memory: 2028K vm-test-run-nixos-test-niks3> server # [ 0.954218] Freeing unused kernel image (initmem) memory: 3656K vm-test-run-nixos-test-niks3> server # [ 0.955392] Write protecting the kernel read-only data: 32768k vm-test-run-nixos-test-niks3> server # [ 0.957296] Freeing unused kernel image (text/rodata gap) memory: 1168K vm-test-run-nixos-test-niks3> server # [ 0.958871] Freeing unused kernel image (rodata/data gap) memory: 676K vm-test-run-nixos-test-niks3> builder # [ 1.000556] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-nixos-test-niks3> builder # [ 1.001660] Run /init as init process vm-test-run-nixos-test-niks3> builder # [ 1.012636] systemd[1]: Inserted module 'autofs4' vm-test-run-nixos-test-niks3> builder # [ 1.032551] fuse: init (API version 7.45) vm-test-run-nixos-test-niks3> builder # [ 1.039947] ACPI: \_SB_.GSIG: Enabled at IRQ 22 vm-test-run-nixos-test-niks3> server # [ 1.009589] x86/mm: Checked W+X mappings: passed, no W+X pages found. vm-test-run-nixos-test-niks3> server # [ 1.010719] Run /init as init process vm-test-run-nixos-test-niks3> builder # [ 1.042880] ACPI: \_SB_.GSIH: Enabled at IRQ 23 vm-test-run-nixos-test-niks3> builder # [ 1.045787] ACPI: \_SB_.GSIE: Enabled at IRQ 20 vm-test-run-nixos-test-niks3> builder # [ 1.047756] ACPI: \_SB_.GSIF: Enabled at IRQ 21 vm-test-run-nixos-test-niks3> builder # [ 1.052787] virtiofs virtio5: discovered new tag: nix-store vm-test-run-nixos-test-niks3> server # [ 1.021673] systemd[1]: Inserted module 'autofs4' vm-test-run-nixos-test-niks3> builder # [ 1.054399] virtiofs virtio5: virtio_fs_setup_dax: No cache capability vm-test-run-nixos-test-niks3> builder # [ 1.061651] virtiofs virtio6: discovered new tag: shared vm-test-run-nixos-test-niks3> builder # [ 1.063276] virtiofs virtio6: virtio_fs_setup_dax: No cache capability vm-test-run-nixos-test-niks3> builder # [ 1.066570] virtiofs virtio7: discovered new tag: xchg vm-test-run-nixos-test-niks3> builder # [ 1.068063] virtiofs virtio7: virtio_fs_setup_dax: No cache capability vm-test-run-nixos-test-niks3> server # [ 1.041799] fuse: init (API version 7.45) vm-test-run-nixos-test-niks3> server # [ 1.049645] ACPI: \_SB_.GSIG: Enabled at IRQ 22 vm-test-run-nixos-test-niks3> server # [ 1.052155] ACPI: \_SB_.GSIH: Enabled at IRQ 23 vm-test-run-nixos-test-niks3> server # [ 1.055839] ACPI: \_SB_.GSIE: Enabled at IRQ 20 vm-test-run-nixos-test-niks3> server # [ 1.057906] ACPI: \_SB_.GSIF: Enabled at IRQ 21 vm-test-run-nixos-test-niks3> builder # [ 1.091537] systemd[1]: Successfully made /usr/ read-only. vm-test-run-nixos-test-niks3> server # [ 1.062872] virtiofs virtio5: discovered new tag: nix-store vm-test-run-nixos-test-niks3> server # [ 1.064509] virtiofs virtio5: virtio_fs_setup_dax: No cache capability vm-test-run-nixos-test-niks3> server # [ 1.071754] virtiofs virtio6: discovered new tag: shared vm-test-run-nixos-test-niks3> server # [ 1.073452] virtiofs virtio6: virtio_fs_setup_dax: No cache capability vm-test-run-nixos-test-niks3> server # [ 1.076716] virtiofs virtio7: discovered new tag: xchg vm-test-run-nixos-test-niks3> server # [ 1.078245] virtiofs virtio7: virtio_fs_setup_dax: No cache capability vm-test-run-nixos-test-niks3> server # [ 1.098092] systemd[1]: Successfully made /usr/ read-only. vm-test-run-nixos-test-niks3> builder # [ 1.428320] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-nixos-test-niks3> builder # [ 1.440568] systemd[1]: Detected virtualization kvm. vm-test-run-nixos-test-niks3> builder # [ 1.442720] systemd[1]: Detected architecture x86-64. vm-test-run-nixos-test-niks3> builder # [ 1.444834] systemd[1]: Running in initrd. vm-test-run-nixos-test-niks3> builder # [ 1.447343] systemd[1]: Initializing machine ID from random generator. vm-test-run-nixos-test-niks3> builder # [ 1.450294] systemd[1]: Hostname set to . vm-test-run-nixos-test-niks3> server # [ 1.434943] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-nixos-test-niks3> server # [ 1.446991] systemd[1]: Detected virtualization kvm. vm-test-run-nixos-test-niks3> server # [ 1.449133] systemd[1]: Detected architecture x86-64. vm-test-run-nixos-test-niks3> server # [ 1.451285] systemd[1]: Running in initrd. vm-test-run-nixos-test-niks3> server # [ 1.453796] systemd[1]: Initializing machine ID from random generator. vm-test-run-nixos-test-niks3> server # [ 1.455086] systemd[1]: Hostname set to . vm-test-run-nixos-test-niks3> builder # [ 1.653569] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-nixos-test-niks3> builder # [ 1.700775] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-nixos-test-niks3> builder # [ 1.704638] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-nixos-test-niks3> builder # [ 1.705888] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-nixos-test-niks3> builder # [ 1.707324] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-nixos-test-niks3> builder # [ 1.708466] systemd[1]: Reached target Path Units. vm-test-run-nixos-test-niks3> builder # [ 1.709327] systemd[1]: Reached target Slice Units. vm-test-run-nixos-test-niks3> server # [ 1.676843] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-nixos-test-niks3> builder # [ 1.710193] systemd[1]: Reached target Swaps. vm-test-run-nixos-test-niks3> builder # [ 1.711003] systemd[1]: Reached target Timer Units. vm-test-run-nixos-test-niks3> builder # [ 1.711972] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-nixos-test-niks3> builder # [ 1.713220] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-nixos-test-niks3> builder # [ 1.714428] systemd[1]: Listening on Journal Sockets. vm-test-run-nixos-test-niks3> builder # [ 1.715436] systemd[1]: Listening on udev Control Socket. vm-test-run-nixos-test-niks3> builder # [ 1.716467] systemd[1]: Listening on udev Kernel Socket. vm-test-run-nixos-test-niks3> builder # [ 1.717430] systemd[1]: Reached target Socket Units. vm-test-run-nixos-test-niks3> builder # [ 1.730729] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-nixos-test-niks3> builder # [ 1.735441] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-nixos-test-niks3> builder # [ 1.743437] systemd[1]: Starting Journal Service... vm-test-run-nixos-test-niks3> builder # [ 1.753472] systemd[1]: Starting Load Kernel Modules... vm-test-run-nixos-test-niks3> builder # [ 1.756481] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> server # [ 1.726252] systemd[1]: Queued start job for default target Initrd Default Target. vm-test-run-nixos-test-niks3> server # [ 1.730877] systemd[1]: Created slice Slice /system/modprobe. vm-test-run-nixos-test-niks3> server # [ 1.732170] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-nixos-test-niks3> builder # [ 1.765085] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-nixos-test-niks3> server # [ 1.733678] systemd[1]: Expecting device /dev/disk/by-label/nixos... vm-test-run-nixos-test-niks3> server # [ 1.734841] systemd[1]: Reached target Path Units. vm-test-run-nixos-test-niks3> server # [ 1.735766] systemd[1]: Reached target Slice Units. vm-test-run-nixos-test-niks3> server # [ 1.736719] systemd[1]: Reached target Swaps. vm-test-run-nixos-test-niks3> server # [ 1.737574] systemd[1]: Reached target Timer Units. vm-test-run-nixos-test-niks3> server # [ 1.738639] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-nixos-test-niks3> server # [ 1.740145] systemd[1]: Listening on Journal Socket (/dev/log). vm-test-run-nixos-test-niks3> server # [ 1.741435] systemd[1]: Listening on Journal Sockets. vm-test-run-nixos-test-niks3> server # [ 1.742470] systemd[1]: Listening on udev Control Socket. vm-test-run-nixos-test-niks3> server # [ 1.743638] systemd[1]: Listening on udev Kernel Socket. vm-test-run-nixos-test-niks3> builder # [ 1.779440] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-nixos-test-niks3> builder # [ 1.783996] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 1.744672] systemd[1]: Reached target Socket Units. vm-test-run-nixos-test-niks3> builder # [ 1.788985] systemd-journald[65]: Collecting audit messages is disabled. vm-test-run-nixos-test-niks3> server # [ 1.759403] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-nixos-test-niks3> builder # [ 1.791769] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-nixos-test-niks3> server # [ 1.764433] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-nixos-test-niks3> builder # [ 1.798175] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-nixos-test-niks3> server # [ 1.773079] systemd[1]: Starting Journal Service... vm-test-run-nixos-test-niks3> builder # [ 1.807435] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-nixos-test-niks3> server # [ 1.786927] systemd[1]: Starting Load Kernel Modules... vm-test-run-nixos-test-niks3> builder # [ 1.818271] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-nixos-test-niks3> server # [ 1.790415] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 1.828704] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-nixos-test-niks3> server # [ 1.798537] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-nixos-test-niks3> server # [ 1.813685] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-nixos-test-niks3> builder # [ 1.851452] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-nixos-test-niks3> server # [ 1.820022] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 1.826714] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-nixos-test-niks3> builder # [ 1.860579] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-nixos-test-niks3> server # [ 1.833882] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config vm-test-run-nixos-test-niks3> server # [ 1.836463] systemd-journald[65]: Collecting audit messages is disabled. vm-test-run-nixos-test-niks3> builder # [ 1.871927] systemd[1]: Finished Load Kernel Modules. vm-test-run-nixos-test-niks3> server # [ 1.846398] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-nixos-test-niks3> builder # [ 1.879609] systemd[1]: Starting Apply Kernel Variables... vm-test-run-nixos-test-niks3> server # [ 1.853535] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. vm-test-run-nixos-test-niks3> server # [ 1.866585] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev vm-test-run-nixos-test-niks3> builder # [ 1.899449] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-nixos-test-niks3> builder # [ 1.904608] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-nixos-test-niks3> builder # [ 1.910441] systemd[1]: Reached target Local File Systems. vm-test-run-nixos-test-niks3> builder # [ 1.776830] systemd-modules-load[66]: Inserted module 'dm_mod' vm-test-run-nixos-test-niks3> builder # [ 1.781789] systemd-modules-load[66]: Inserted module 'virtio_balloon' vm-test-run-nixos-test-niks3> builder # [ 1.782870] systemd-modules-load[66]: Inserted module 'virtio_gpu' vm-test-run-nixos-test-niks3> builder # [ 1.920437] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-nixos-test-niks3> server # [ 1.892423] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-nixos-test-niks3> builder # [ 1.926560] systemd[1]: Started Journal Service. vm-test-run-nixos-test-niks3> builder # [ 1.797493] systemd[1]: Finished Apply Kernel Variables. vm-test-run-nixos-test-niks3> server # [ 1.901540] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-nixos-test-niks3> server # [ 1.913395] systemd[1]: Finished Load Kernel Modules. vm-test-run-nixos-test-niks3> builder # [ 1.811330] systemd[1]: Starting Create System Files and Directories... vm-test-run-nixos-test-niks3> server # [ 1.924418] systemd[1]: Starting Apply Kernel Variables... vm-test-run-nixos-test-niks3> builder # [ 1.840940] systemd[1]: Finished Create System Files and Directories. vm-test-run-nixos-test-niks3> server # [ 1.946413] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-nixos-test-niks3> builder # [ 1.846336] systemd-udevd[74]: Using default interface naming scheme 'v261'. vm-test-run-nixos-test-niks3> server # [ 1.951561] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-nixos-test-niks3> server # [ 1.956563] systemd[1]: Reached target Local File Systems. vm-test-run-nixos-test-niks3> server # [ 1.815637] systemd-modules-load[66]: Inserted module 'dm_mod' vm-test-run-nixos-test-niks3> server # [ 1.820332] systemd-modules-load[66]: Inserted module 'virtio_balloon' vm-test-run-nixos-test-niks3> server # [ 1.821391] systemd-modules-load[66]: Inserted module 'virtio_gpu' vm-test-run-nixos-test-niks3> server # [ 1.967143] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-nixos-test-niks3> server # [ 1.973527] systemd[1]: Started Journal Service. vm-test-run-nixos-test-niks3> builder # [ 1.870440] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-nixos-test-niks3> server # [ 1.836173] systemd[1]: Finished Apply Kernel Variables. vm-test-run-nixos-test-niks3> server # [ 1.849308] systemd[1]: Starting Create System Files and Directories... vm-test-run-nixos-test-niks3> server # [ 1.881420] systemd[1]: Finished Create System Files and Directories. vm-test-run-nixos-test-niks3> builder # [ 1.924932] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-nixos-test-niks3> builder # [ 1.925900] systemd[1]: Reached target System Initialization. vm-test-run-nixos-test-niks3> server # [ 1.887363] systemd-udevd[73]: Using default interface naming scheme 'v261'. vm-test-run-nixos-test-niks3> builder # [ 1.926778] systemd[1]: Reached target Basic System. vm-test-run-nixos-test-niks3> server # [ 1.912108] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-nixos-test-niks3> server # [ 1.962148] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-nixos-test-niks3> server # [ 1.964792] systemd[1]: Reached target System Initialization. vm-test-run-nixos-test-niks3> server # [ 1.965767] systemd[1]: Reached target Basic System. vm-test-run-nixos-test-niks3> builder # [ 2.245206] virtio_blk virtio2: 1/0/0 default/read/poll queues vm-test-run-nixos-test-niks3> builder # [ 2.255318] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-nixos-test-niks3> builder # [ 2.257975] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-nixos-test-niks3> builder # [ 2.263416] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-nixos-test-niks3> builder # [ 2.264088] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-nixos-test-niks3> builder # [ 2.272783] ehci-pci 0000:00:1d.7: EHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.273728] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 vm-test-run-nixos-test-niks3> builder # [ 2.275544] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 vm-test-run-nixos-test-niks3> builder # [ 2.281398] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 vm-test-run-nixos-test-niks3> builder # [ 2.282311] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> builder # [ 2.285367] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> builder # [ 2.286785] usb usb1: Product: EHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.288380] usb usb1: Manufacturer: Linux 6.18.54 ehci_hcd vm-test-run-nixos-test-niks3> builder # [ 2.289140] usb usb1: SerialNumber: 0000:00:1d.7 vm-test-run-nixos-test-niks3> builder # [ 2.291793] hub 1-0:1.0: USB hub found vm-test-run-nixos-test-niks3> builder # [ 2.294372] hub 1-0:1.0: 6 ports detected vm-test-run-nixos-test-niks3> builder # [ 2.297421] uhci_hcd 0000:00:1d.0: UHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.298172] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 vm-test-run-nixos-test-niks3> builder # [ 2.304403] uhci_hcd 0000:00:1d.0: detected 2 ports vm-test-run-nixos-test-niks3> builder # [ 2.305167] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c180 vm-test-run-nixos-test-niks3> builder # [ 2.314085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> builder # [ 2.315246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> server # [ 2.292728] virtio_blk virtio2: 1/0/0 default/read/poll queues vm-test-run-nixos-test-niks3> builder # [ 2.326681] usb usb2: Product: UHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.327414] usb usb2: Manufacturer: Linux 6.18.54 uhci_hcd vm-test-run-nixos-test-niks3> server # [ 2.295013] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 vm-test-run-nixos-test-niks3> builder # [ 2.328148] usb usb2: SerialNumber: 0000:00:1d.0 vm-test-run-nixos-test-niks3> server # [ 2.303393] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) vm-test-run-nixos-test-niks3> server # [ 2.307131] serio: i8042 KBD port at 0x60,0x64 irq 1 vm-test-run-nixos-test-niks3> server # [ 2.307869] serio: i8042 AUX port at 0x60,0x64 irq 12 vm-test-run-nixos-test-niks3> builder # [ 2.342120] hub 2-0:1.0: USB hub found vm-test-run-nixos-test-niks3> builder # [ 2.348722] SCSI subsystem initialized vm-test-run-nixos-test-niks3> builder # [ 2.350230] hub 2-0:1.0: 2 ports detected vm-test-run-nixos-test-niks3> server # [ 2.328777] ehci-pci 0000:00:1d.7: EHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.329755] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 vm-test-run-nixos-test-niks3> server # [ 2.331037] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 vm-test-run-nixos-test-niks3> builder # [ 2.233082] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> builder # [ 2.369377] uhci_hcd 0000:00:1d.1: UHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.370079] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 vm-test-run-nixos-test-niks3> server # [ 2.339562] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 vm-test-run-nixos-test-niks3> server # [ 2.340755] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> server # [ 2.344327] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> server # [ 2.345375] usb usb1: Product: EHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.346016] usb usb1: Manufacturer: Linux 6.18.54 ehci_hcd vm-test-run-nixos-test-niks3> server # [ 2.346794] usb usb1: SerialNumber: 0000:00:1d.7 vm-test-run-nixos-test-niks3> server # [ 2.350080] hub 1-0:1.0: USB hub found vm-test-run-nixos-test-niks3> server # [ 2.352344] hub 1-0:1.0: 6 ports detected vm-test-run-nixos-test-niks3> builder # [ 2.250048] (udev-worker)[86]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> builder # [ 2.390669] uhci_hcd 0000:00:1d.1: detected 2 ports vm-test-run-nixos-test-niks3> server # [ 2.360574] uhci_hcd 0000:00:1d.0: UHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.361356] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 vm-test-run-nixos-test-niks3> builder # [ 2.265113] (udev-worker)[84]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-nixos-test-niks3> builder # [ 2.267158] (udev-worker)[84]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> server # [ 2.373432] uhci_hcd 0000:00:1d.0: detected 2 ports vm-test-run-nixos-test-niks3> server # [ 2.374210] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c180 vm-test-run-nixos-test-niks3> builder # [ 2.272389] systemd-vconsole-setup[97]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-nixos-test-niks3> builder # [ 2.275088] systemd[1]: Finished Virtual Console Setup. vm-test-run-nixos-test-niks3> builder # [ 2.411636] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a0 vm-test-run-nixos-test-niks3> builder # [ 2.415514] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-nixos-test-niks3> server # [ 2.384629] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> server # [ 2.385834] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> builder # [ 2.426070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> builder # [ 2.427381] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> builder # [ 2.428448] usb usb3: Product: UHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.429132] usb usb3: Manufacturer: Linux 6.18.54 uhci_hcd vm-test-run-nixos-test-niks3> server # [ 2.402932] usb usb2: Product: UHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.410218] SCSI subsystem initialized vm-test-run-nixos-test-niks3> builder # [ 2.444373] usb usb3: SerialNumber: 0000:00:1d.1 vm-test-run-nixos-test-niks3> server # [ 2.412704] usb usb2: Manufacturer: Linux 6.18.54 uhci_hcd vm-test-run-nixos-test-niks3> builder # [ 2.447421] hub 3-0:1.0: USB hub found vm-test-run-nixos-test-niks3> server # [ 2.273210] (udev-worker)[87]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> builder # [ 2.448640] hub 3-0:1.0: 2 ports detected vm-test-run-nixos-test-niks3> server # [ 2.419501] usb usb2: SerialNumber: 0000:00:1d.0 vm-test-run-nixos-test-niks3> server # [ 2.279569] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> builder # [ 2.318967] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-nixos-test-niks3> builder # [ 2.319884] systemd[1]: Reached target Initrd Root Device. vm-test-run-nixos-test-niks3> builder # [ 2.320896] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-nixos-test-niks3> builder # [ 2.461933] uhci_hcd 0000:00:1d.2: UHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.462687] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 vm-test-run-nixos-test-niks3> builder # [ 2.466389] uhci_hcd 0000:00:1d.2: detected 2 ports vm-test-run-nixos-test-niks3> builder # [ 2.467155] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c0 vm-test-run-nixos-test-niks3> server # [ 2.436532] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 vm-test-run-nixos-test-niks3> server # [ 2.438921] hub 2-0:1.0: USB hub found vm-test-run-nixos-test-niks3> server # [ 2.442336] hub 2-0:1.0: 2 ports detected vm-test-run-nixos-test-niks3> builder # [ 2.474586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> builder # [ 2.477483] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> server # [ 2.303132] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-nixos-test-niks3> server # [ 2.306111] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> builder # [ 2.481929] usb usb4: Product: UHCI Host Controller vm-test-run-nixos-test-niks3> builder # [ 2.482911] usb usb4: Manufacturer: Linux 6.18.54 uhci_hcd vm-test-run-nixos-test-niks3> builder # [ 2.485401] usb usb4: SerialNumber: 0000:00:1d.2 vm-test-run-nixos-test-niks3> builder # [ 2.487487] hub 4-0:1.0: USB hub found vm-test-run-nixos-test-niks3> builder # [ 2.489495] hub 4-0:1.0: 2 ports detected vm-test-run-nixos-test-niks3> builder # [ 2.359204] systemd-fsck[105]: nixos: clean, 12/65536 files, 13019/262144 blocks vm-test-run-nixos-test-niks3> builder # [ 2.365061] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. vm-test-run-nixos-test-niks3> server # [ 2.478972] uhci_hcd 0000:00:1d.1: UHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.479788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 vm-test-run-nixos-test-niks3> server # [ 2.340211] systemd-vconsole-setup[97]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-nixos-test-niks3> server # [ 2.342864] systemd[1]: Finished Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 2.352782] systemd[1]: Found device /dev/disk/by-label/nixos. vm-test-run-nixos-test-niks3> builder # [ 2.529222] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode vm-test-run-nixos-test-niks3> server # [ 2.355933] systemd[1]: Reached target Initrd Root Device. vm-test-run-nixos-test-niks3> builder # [ 2.530393] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-nixos-test-niks3> server # [ 2.359314] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... vm-test-run-nixos-test-niks3> builder # [ 2.535716] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) vm-test-run-nixos-test-niks3> builder # [ 2.536977] ahci 0000:00:1f.2: flags: 64bit ncq only vm-test-run-nixos-test-niks3> server # [ 2.508363] uhci_hcd 0000:00:1d.1: detected 2 ports vm-test-run-nixos-test-niks3> server # [ 2.509176] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a0 vm-test-run-nixos-test-niks3> builder # [ 2.547595] scsi host0: ahci vm-test-run-nixos-test-niks3> server # [ 2.516536] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> builder # [ 2.549261] scsi host1: ahci vm-test-run-nixos-test-niks3> builder # [ 2.550995] scsi host2: ahci vm-test-run-nixos-test-niks3> builder # [ 2.552337] scsi host3: ahci vm-test-run-nixos-test-niks3> builder # [ 2.554101] scsi host4: ahci vm-test-run-nixos-test-niks3> builder # [ 2.555650] scsi host5: ahci vm-test-run-nixos-test-niks3> server # [ 2.523335] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> builder # [ 2.556183] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> server # [ 2.525334] usb usb3: Product: UHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.526012] usb usb3: Manufacturer: Linux 6.18.54 uhci_hcd vm-test-run-nixos-test-niks3> builder # [ 2.558246] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> builder # [ 2.559445] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> builder # [ 2.560678] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> builder # [ 2.561858] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> server # [ 2.530562] usb usb3: SerialNumber: 0000:00:1d.1 vm-test-run-nixos-test-niks3> builder # [ 2.563052] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> server # [ 2.533106] hub 3-0:1.0: USB hub found vm-test-run-nixos-test-niks3> server # [ 2.534736] hub 3-0:1.0: 2 ports detected vm-test-run-nixos-test-niks3> server # [ 2.542125] uhci_hcd 0000:00:1d.2: UHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.545424] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 vm-test-run-nixos-test-niks3> server # [ 2.404802] systemd-fsck[104]: nixos: clean, 12/65536 files, 13019/262144 blocks vm-test-run-nixos-test-niks3> server # [ 2.549378] uhci_hcd 0000:00:1d.2: detected 2 ports vm-test-run-nixos-test-niks3> server # [ 2.550155] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c0 vm-test-run-nixos-test-niks3> server # [ 2.413552] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. vm-test-run-nixos-test-niks3> server # [ 2.559472] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 vm-test-run-nixos-test-niks3> server # [ 2.560897] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 vm-test-run-nixos-test-niks3> server # [ 2.562802] usb usb4: Product: UHCI Host Controller vm-test-run-nixos-test-niks3> server # [ 2.568201] usb usb4: Manufacturer: Linux 6.18.54 uhci_hcd vm-test-run-nixos-test-niks3> server # [ 2.569432] usb usb4: SerialNumber: 0000:00:1d.2 vm-test-run-nixos-test-niks3> server # [ 2.573681] hub 4-0:1.0: USB hub found vm-test-run-nixos-test-niks3> server # [ 2.575335] hub 4-0:1.0: 2 ports detected vm-test-run-nixos-test-niks3> server # [ 2.593376] usb 1-1: new high-speed USB device number 2 using ehci-pci vm-test-run-nixos-test-niks3> server # [ 2.599888] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode vm-test-run-nixos-test-niks3> server # [ 2.611860] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) vm-test-run-nixos-test-niks3> server # [ 2.613355] ahci 0000:00:1f.2: flags: 64bit ncq only vm-test-run-nixos-test-niks3> server # [ 2.617170] scsi host0: ahci vm-test-run-nixos-test-niks3> server # [ 2.618984] scsi host1: ahci vm-test-run-nixos-test-niks3> server # [ 2.620895] scsi host2: ahci vm-test-run-nixos-test-niks3> server # [ 2.622624] scsi host3: ahci vm-test-run-nixos-test-niks3> server # [ 2.624223] scsi host4: ahci vm-test-run-nixos-test-niks3> server # [ 2.625898] scsi host5: ahci vm-test-run-nixos-test-niks3> server # [ 2.626958] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> server # [ 2.628720] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> server # [ 2.629894] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> builder # [ 2.660791] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-nixos-test-niks3> server # [ 2.631161] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> server # [ 2.632363] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> builder # [ 2.663664] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-nixos-test-niks3> server # [ 2.633571] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 47 lpm-pol 1 vm-test-run-nixos-test-niks3> builder # [ 2.666918] usb 1-1: Product: QEMU USB Tablet vm-test-run-nixos-test-niks3> builder # [ 2.668848] usb 1-1: Manufacturer: QEMU vm-test-run-nixos-test-niks3> builder # [ 2.670520] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 vm-test-run-nixos-test-niks3> builder # [ 2.702568] hid: raw HID events driver (C) Jiri Kosina vm-test-run-nixos-test-niks3> server # [ 2.723444] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 vm-test-run-nixos-test-niks3> server # [ 2.726473] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 vm-test-run-nixos-test-niks3> server # [ 2.729931] usb 1-1: Product: QEMU USB Tablet vm-test-run-nixos-test-niks3> server # [ 2.731938] usb 1-1: Manufacturer: QEMU vm-test-run-nixos-test-niks3> server # [ 2.733771] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 vm-test-run-nixos-test-niks3> builder # [ 2.639539] systemd[1]: Mounting /sysroot... vm-test-run-nixos-test-niks3> server # [ 2.766401] hid: raw HID events driver (C) Jiri Kosina vm-test-run-nixos-test-niks3> server # [ 2.667657] systemd[1]: Mounting /sysroot... vm-test-run-nixos-test-niks3> builder # [ 2.872105] ata4: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> builder # [ 2.874580] ata1: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> builder # [ 2.877062] ata6: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> builder # [ 2.879463] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) vm-test-run-nixos-test-niks3> builder # [ 2.881740] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-nixos-test-niks3> builder # [ 2.883932] ata3.00: applying bridge limits vm-test-run-nixos-test-niks3> builder # [ 2.885899] ata5: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> builder # [ 2.888314] ata2: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> builder # [ 2.890630] ata3.00: configured for UDMA/100 vm-test-run-nixos-test-niks3> builder # [ 2.893030] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-nixos-test-niks3> builder # [ 2.970611] usbcore: registered new interface driver usbhid vm-test-run-nixos-test-niks3> builder # [ 2.973732] usbhid: USB HID core driver vm-test-run-nixos-test-niks3> server # [ 2.944255] ata4: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> server # [ 2.946776] ata2: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> server # [ 2.949717] ata1: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> server # [ 2.952230] ata5: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> server # [ 2.954776] ata6: SATA link down (SStatus 0 SControl 300) vm-test-run-nixos-test-niks3> server # [ 2.957386] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) vm-test-run-nixos-test-niks3> server # [ 2.959900] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 vm-test-run-nixos-test-niks3> server # [ 2.962348] ata3.00: applying bridge limits vm-test-run-nixos-test-niks3> server # [ 2.964356] ata3.00: configured for UDMA/100 vm-test-run-nixos-test-niks3> builder # [ 2.996857] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-nixos-test-niks3> builder # [ 2.998672] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 vm-test-run-nixos-test-niks3> server # [ 2.966973] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 vm-test-run-nixos-test-niks3> builder # [ 3.005204] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-nixos-test-niks3> builder # [ 3.015486] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-nixos-test-niks3> builder # [ 3.019164] EXT4-fs (vda): mounted filesystem af18eb89-4e0b-4e40-ac59-3e78dc639ab9 r/w with ordered data mode. Quota mode: none. vm-test-run-nixos-test-niks3> builder # [ 2.890295] systemd[1]: Mounted /sysroot. vm-test-run-nixos-test-niks3> builder # [ 2.890922] systemd[1]: Reached target Initrd Root File System. vm-test-run-nixos-test-niks3> builder # [ 2.897727] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-nixos-test-niks3> builder # [ 2.902144] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-nixos-test-niks3> builder # [ 2.905768] systemd[1]: Mounting /sysroot/run... vm-test-run-nixos-test-niks3> builder # [ 2.909221] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-nixos-test-niks3> builder # [ 2.916136] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-nixos-test-niks3> builder # [ 2.928077] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-nixos-test-niks3> server # [ 3.049558] usbcore: registered new interface driver usbhid vm-test-run-nixos-test-niks3> server # [ 3.052314] usbhid: USB HID core driver vm-test-run-nixos-test-niks3> builder # [ 2.958926] systemd-sysroot-fstab-check[143]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-nixos-test-niks3> builder # [ 2.972103] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-nixos-test-niks3> builder # [ 2.972907] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-nixos-test-niks3> server # [ 3.075837] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 vm-test-run-nixos-test-niks3> builder # [ 2.976287] systemd[1]: Mounted /sysroot/run. vm-test-run-nixos-test-niks3> server # [ 3.079596] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 vm-test-run-nixos-test-niks3> builder # [ 2.979061] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-nixos-test-niks3> builder # [ 2.979792] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-nixos-test-niks3> server # [ 3.083122] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray vm-test-run-nixos-test-niks3> builder # [ 2.988070] systemd[1]: Reload requested from client PID 143 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-nixos-test-niks3> builder # [ 2.989560] systemd[1]: Reloading... vm-test-run-nixos-test-niks3> server # [ 3.094546] cdrom: Uniform CD-ROM driver Revision: 3.20 vm-test-run-nixos-test-niks3> server # [ 3.096858] EXT4-fs (vda): mounted filesystem 804d2349-e2fe-40a4-a923-8e73b709dcd3 r/w with ordered data mode. Quota mode: none. vm-test-run-nixos-test-niks3> server # [ 2.960818] systemd[1]: Mounted /sysroot. vm-test-run-nixos-test-niks3> server # [ 2.964076] systemd[1]: Reached target Initrd Root File System. vm-test-run-nixos-test-niks3> server # [ 2.965218] systemd[1]: Starting Mountpoints Configured in the Real Root... vm-test-run-nixos-test-niks3> server # [ 2.985630] systemd-sysroot-fstab-check[136]: /sysroot should be mounted in the initrd, will request daemon-reload. vm-test-run-nixos-test-niks3> server # [ 2.988705] systemd[1]: Reload requested from client PID 136 ('systemd-sysroot') (unit initrd-parse-etc.service)... vm-test-run-nixos-test-niks3> server # [ 2.991060] systemd[1]: Reloading... vm-test-run-nixos-test-niks3> builder # [ 3.051685] systemd[1]: Reloading finished in 63 ms. vm-test-run-nixos-test-niks3> builder # [ 3.060951] systemd-sysroot-fstab-check[143]: Requesting initrd-fs.target/start/replace... vm-test-run-nixos-test-niks3> builder # [ 3.063892] systemd-sysroot-fstab-check[143]: Requesting swap.target/start/replace... vm-test-run-nixos-test-niks3> builder # [ 3.066107] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-nixos-test-niks3> builder # [ 3.068565] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.072087] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-nixos-test-niks3> builder # [ 3.072975] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-nixos-test-niks3> builder # [ 3.082814] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.083883] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-nixos-test-niks3> server # [ 3.073462] systemd[1]: Reloading finished in 82 ms. vm-test-run-nixos-test-niks3> server # [ 3.082702] systemd-sysroot-fstab-check[136]: Requesting initrd-fs.target/start/replace... vm-test-run-nixos-test-niks3> server # [ 3.086153] systemd-sysroot-fstab-check[136]: Requesting swap.target/start/replace... vm-test-run-nixos-test-niks3> server # [ 3.091995] systemd[1]: initrd-parse-etc.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.093461] systemd[1]: Finished Mountpoints Configured in the Real Root. vm-test-run-nixos-test-niks3> server # [ 3.094486] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. vm-test-run-nixos-test-niks3> builder # [ 3.639970] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-nixos-test-niks3> builder # [ 3.688243] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-nixos-test-niks3> builder # [ 3.690696] systemd[1]: Reached target Initrd File Systems. vm-test-run-nixos-test-niks3> builder # [ 3.694231] systemd[1]: Starting Find NixOS closure... vm-test-run-nixos-test-niks3> builder # [ 3.700262] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-nixos-test-niks3> server # [ 3.671185] systemd[1]: Mounting /sysroot/nix/.ro-store... vm-test-run-nixos-test-niks3> server # [ 3.678168] systemd[1]: Mounting /sysroot/nix/.rw-store... vm-test-run-nixos-test-niks3> server # [ 3.686164] systemd[1]: Mounting /sysroot/run... vm-test-run-nixos-test-niks3> builder # [ 3.727110] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-nixos-test-niks3> builder # [ 3.730067] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.735821] systemd[1]: Finished Find NixOS closure. vm-test-run-nixos-test-niks3> server # [ 3.696163] systemd[1]: Mounting /sysroot/tmp/shared... vm-test-run-nixos-test-niks3> builder # [ 3.737268] systemd[1]: Reached target Initrd Default Target. vm-test-run-nixos-test-niks3> builder # [ 3.738976] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-nixos-test-niks3> server # [ 3.706508] systemd[1]: Mounting /sysroot/tmp/xchg... vm-test-run-nixos-test-niks3> builder # [ 3.752326] systemd[1]: Stopped target Initrd Default Target. vm-test-run-nixos-test-niks3> builder # [ 3.753360] systemd[1]: Stopped target Basic System. vm-test-run-nixos-test-niks3> builder # [ 3.754340] systemd[1]: Stopped target Initrd Root Device. vm-test-run-nixos-test-niks3> builder # [ 3.756113] systemd[1]: Stopped target Path Units. vm-test-run-nixos-test-niks3> builder # [ 3.756820] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.757837] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-nixos-test-niks3> builder # [ 3.758903] systemd[1]: Stopped target Slice Units. vm-test-run-nixos-test-niks3> builder # [ 3.759666] systemd[1]: Stopped target Socket Units. vm-test-run-nixos-test-niks3> builder # [ 3.760602] systemd[1]: Stopped target System Initialization. vm-test-run-nixos-test-niks3> builder # [ 3.761533] systemd[1]: Stopped target Swaps. vm-test-run-nixos-test-niks3> builder # [ 3.762519] systemd[1]: Stopped target Timer Units. vm-test-run-nixos-test-niks3> builder # [ 3.763419] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.764454] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-nixos-test-niks3> builder # [ 3.766053] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.767107] systemd[1]: Stopped Find NixOS closure. vm-test-run-nixos-test-niks3> builder # [ 3.768166] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-nixos-test-niks3> builder # [ 3.769161] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.771158] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-nixos-test-niks3> builder # [ 3.772164] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.773377] systemd[1]: Stopped Load Kernel Modules. vm-test-run-nixos-test-niks3> builder # [ 3.775441] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.776582] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-nixos-test-niks3> builder # [ 3.777992] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.779150] systemd[1]: Stopped Create System Files and Directories. vm-test-run-nixos-test-niks3> builder # [ 3.781389] systemd[1]: Stopped target Local File Systems. vm-test-run-nixos-test-niks3> builder # [ 3.782171] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-nixos-test-niks3> server # [ 3.743384] systemd[1]: Mounted /sysroot/nix/.rw-store. vm-test-run-nixos-test-niks3> builder # [ 3.783341] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.784344] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-nixos-test-niks3> builder # [ 3.786745] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-nixos-test-niks3> builder # [ 3.787795] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.748974] systemd[1]: Mounted /sysroot/nix/.ro-store. vm-test-run-nixos-test-niks3> builder # [ 3.788766] systemd[1]: Stopped Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 3.750785] systemd[1]: Mounted /sysroot/run. vm-test-run-nixos-test-niks3> server # [ 3.752865] systemd[1]: Mounted /sysroot/tmp/shared. vm-test-run-nixos-test-niks3> server # [ 3.756111] systemd[1]: Mounted /sysroot/tmp/xchg. vm-test-run-nixos-test-niks3> builder # [ 3.796234] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.759235] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-nixos-test-niks3> builder # [ 3.799066] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-nixos-test-niks3> builder # [ 3.800090] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.803088] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-nixos-test-niks3> builder # [ 3.808094] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.809165] systemd[1]: Closed udev Control Socket. vm-test-run-nixos-test-niks3> server # [ 3.770762] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.810766] systemd[1]: Starting Cleanup udev Database... vm-test-run-nixos-test-niks3> server # [ 3.772248] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-nixos-test-niks3> builder # [ 3.812142] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.813165] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-nixos-test-niks3> server # [ 3.774470] systemd[1]: Mounting /sysroot/nix/store... vm-test-run-nixos-test-niks3> builder # [ 3.813967] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.815065] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-nixos-test-niks3> builder # [ 3.817118] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.818109] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-nixos-test-niks3> builder # [ 3.819107] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.820514] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-nixos-test-niks3> builder # [ 3.835800] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.797460] systemd[1]: Mounted /sysroot/nix/store. vm-test-run-nixos-test-niks3> builder # [ 3.836920] systemd[1]: Finished Cleanup udev Database. vm-test-run-nixos-test-niks3> server # [ 3.798473] systemd[1]: Reached target Initrd File Systems. vm-test-run-nixos-test-niks3> builder # [ 3.838490] systemd[1]: Reached target Switch Root. vm-test-run-nixos-test-niks3> server # [ 3.800063] systemd[1]: Starting Find NixOS closure... vm-test-run-nixos-test-niks3> builder # [ 3.840329] systemd[1]: Starting NixOS Activation... vm-test-run-nixos-test-niks3> server # [ 3.802658] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... vm-test-run-nixos-test-niks3> server # [ 3.820889] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. vm-test-run-nixos-test-niks3> server # [ 3.828474] systemd[1]: Finished Find NixOS closure. vm-test-run-nixos-test-niks3> server # [ 3.830188] systemd[1]: Reached target Initrd Default Target. vm-test-run-nixos-test-niks3> server # [ 3.831738] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... vm-test-run-nixos-test-niks3> server # [ 3.845749] systemd[1]: Stopped target Initrd Default Target. vm-test-run-nixos-test-niks3> server # [ 3.847109] systemd[1]: Stopped target Basic System. vm-test-run-nixos-test-niks3> server # [ 3.847995] systemd[1]: Stopped target Initrd Root Device. vm-test-run-nixos-test-niks3> server # [ 3.848961] systemd[1]: Stopped target Path Units. vm-test-run-nixos-test-niks3> server # [ 3.849769] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.852110] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. vm-test-run-nixos-test-niks3> server # [ 3.853133] systemd[1]: Stopped target Slice Units. vm-test-run-nixos-test-niks3> server # [ 3.853834] systemd[1]: Stopped target Socket Units. vm-test-run-nixos-test-niks3> server # [ 3.854810] systemd[1]: Stopped target System Initialization. vm-test-run-nixos-test-niks3> server # [ 3.855647] systemd[1]: Stopped target Swaps. vm-test-run-nixos-test-niks3> server # [ 3.856330] systemd[1]: Stopped target Timer Units. vm-test-run-nixos-test-niks3> server # [ 3.856989] systemd[1]: dbus.socket: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.857873] systemd[1]: Closed D-Bus System Message Bus Socket. vm-test-run-nixos-test-niks3> server # [ 3.859144] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.860164] systemd[1]: Stopped Find NixOS closure. vm-test-run-nixos-test-niks3> server # [ 3.861570] systemd[1]: Starting rw-sysroot-nix-store.service... vm-test-run-nixos-test-niks3> server # [ 3.863189] systemd[1]: systemd-sysctl.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.864322] systemd[1]: Stopped Apply Kernel Variables. vm-test-run-nixos-test-niks3> server # [ 3.865978] systemd[1]: systemd-modules-load.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.867040] systemd[1]: Stopped Load Kernel Modules. vm-test-run-nixos-test-niks3> server # [ 3.867934] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.869675] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. vm-test-run-nixos-test-niks3> server # [ 3.871170] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.910389] initrd-nixos-activation-start[189]: booting system configuration /nix/store/380z13x9384wfk93j6facg9z2kkbjxp0-nixos-system-builder-test vm-test-run-nixos-test-niks3> server # [ 3.872158] systemd[1]: Stopped Create System Files and Directories. vm-test-run-nixos-test-niks3> server # [ 3.874122] systemd[1]: Stopped target Local File Systems. vm-test-run-nixos-test-niks3> server # [ 3.874937] systemd[1]: Stopped target Preparation for Local File Systems. vm-test-run-nixos-test-niks3> server # [ 3.876577] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.877593] systemd[1]: Stopped Coldplug All udev Devices. vm-test-run-nixos-test-niks3> server # [ 3.878988] systemd[1]: Stopping Rule-based Manager for Device Events and Files... vm-test-run-nixos-test-niks3> server # [ 3.881137] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.882194] systemd[1]: Stopped Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 3.889962] systemd[1]: systemd-udevd.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.893070] systemd[1]: Stopped Rule-based Manager for Device Events and Files. vm-test-run-nixos-test-niks3> server # [ 3.894434] systemd[1]: initrd-cleanup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 3.935690] initrd-nixos-activation-start[189]: running activation script... vm-test-run-nixos-test-niks3> server # [ 3.897842] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. vm-test-run-nixos-test-niks3> server # [ 3.901719] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.902890] systemd[1]: Closed udev Control Socket. vm-test-run-nixos-test-niks3> server # [ 3.905490] systemd[1]: Starting Cleanup udev Database... vm-test-run-nixos-test-niks3> server # [ 3.907287] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.908370] systemd[1]: Stopped Create Static Device Nodes in /dev. vm-test-run-nixos-test-niks3> server # [ 3.909248] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.910352] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. vm-test-run-nixos-test-niks3> server # [ 3.911384] systemd[1]: kmod-static-nodes.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.913119] systemd[1]: Stopped Create List of Static Device Nodes. vm-test-run-nixos-test-niks3> server # [ 3.914536] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.917125] systemd[1]: Finished rw-sysroot-nix-store.service. vm-test-run-nixos-test-niks3> server # [ 3.931973] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 3.934170] systemd[1]: Finished Cleanup udev Database. vm-test-run-nixos-test-niks3> server # [ 3.934916] systemd[1]: Reached target Switch Root. vm-test-run-nixos-test-niks3> server # [ 3.936988] systemd[1]: Starting NixOS Activation... vm-test-run-nixos-test-niks3> server # [ 3.998378] initrd-nixos-activation-start[188]: booting system configuration /nix/store/k5v6c7m838h2am89l3yqmm1r93rg6gh6-nixos-system-server-test vm-test-run-nixos-test-niks3> server # [ 4.026173] initrd-nixos-activation-start[188]: running activation script... vm-test-run-nixos-test-niks3> builder # [ 4.130685] initrd-nixos-activation-start[212]: setting up /etc... vm-test-run-nixos-test-niks3> builder # [ 4.227784] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 4.229349] systemd[1]: Finished NixOS Activation. vm-test-run-nixos-test-niks3> builder # [ 4.231278] systemd[1]: Starting Switch Root... vm-test-run-nixos-test-niks3> builder # [ 4.242626] systemd[1]: Switching root. vm-test-run-nixos-test-niks3> server # [ 4.231990] initrd-nixos-activation-start[211]: setting up /etc... vm-test-run-nixos-test-niks3> builder # [ 4.504608] systemd-journald[65]: Received SIGTERM from PID 1 (systemd). vm-test-run-nixos-test-niks3> server # [ 4.335506] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 4.338109] systemd[1]: Finished NixOS Activation. vm-test-run-nixos-test-niks3> server # [ 4.339092] systemd[1]: Starting Switch Root... vm-test-run-nixos-test-niks3> server # [ 4.353607] systemd[1]: Switching root. vm-test-run-nixos-test-niks3> builder # [ 4.637684] NET: Registered PF_VSOCK protocol family vm-test-run-nixos-test-niks3> server # [ 4.622075] systemd-journald[65]: Received SIGTERM from PID 1 (systemd). vm-test-run-nixos-test-niks3> server # [ 4.707007] NET: Registered PF_VSOCK protocol family vm-test-run-nixos-test-niks3> builder # [ 4.996572] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-nixos-test-niks3> builder # [ 5.006495] systemd[1]: Detected virtualization kvm. vm-test-run-nixos-test-niks3> builder # [ 5.008303] systemd[1]: Detected architecture x86-64. vm-test-run-nixos-test-niks3> builder # [ 5.010256] systemd[1]: Detected first boot. vm-test-run-nixos-test-niks3> builder # [ 5.014274] systemd[1]: Initializing machine ID from random generator. vm-test-run-nixos-test-niks3> server # [ 5.067660] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) vm-test-run-nixos-test-niks3> server # [ 5.077206] systemd[1]: Detected virtualization kvm. vm-test-run-nixos-test-niks3> server # [ 5.079024] systemd[1]: Detected architecture x86-64. vm-test-run-nixos-test-niks3> server # [ 5.080968] systemd[1]: Detected first boot. vm-test-run-nixos-test-niks3> server # [ 5.084665] systemd[1]: Initializing machine ID from random generator. vm-test-run-nixos-test-niks3> builder # [ 5.251129] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-nixos-test-niks3> builder # [ 5.366302] systemd[1]: Applying preset policy. vm-test-run-nixos-test-niks3> server # [ 5.353813] systemd[1]: bpf-restrict-fs: LSM BPF program attached vm-test-run-nixos-test-niks3> server # [ 5.446441] systemd[1]: Applying preset policy. vm-test-run-nixos-test-niks3> builder # [ 5.537862] systemd[1]: Populated /etc with preset unit settings. vm-test-run-nixos-test-niks3> server # [ 5.643105] systemd[1]: Populated /etc with preset unit settings. vm-test-run-nixos-test-niks3> builder # [ 5.725381] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 5.726774] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-nixos-test-niks3> builder # [ 5.728787] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-nixos-test-niks3> builder # [ 5.730932] systemd[1]: Created slice Slice /system/getty. vm-test-run-nixos-test-niks3> builder # [ 5.732295] systemd[1]: Created slice User and Session Slice. vm-test-run-nixos-test-niks3> builder # [ 5.733263] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-nixos-test-niks3> builder # [ 5.734461] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-nixos-test-niks3> builder # [ 5.735524] systemd[1]: Expecting device /dev/hvc0... vm-test-run-nixos-test-niks3> builder # [ 5.736194] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-nixos-test-niks3> builder # [ 5.736978] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-nixos-test-niks3> builder # [ 5.737839] systemd[1]: Stopped target initrd-fs.target. vm-test-run-nixos-test-niks3> builder # [ 5.738613] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-nixos-test-niks3> builder # [ 5.739386] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-nixos-test-niks3> builder # [ 5.740191] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-nixos-test-niks3> builder # [ 5.741103] systemd[1]: Reached target Path Units. vm-test-run-nixos-test-niks3> builder # [ 5.753431] systemd[1]: Reached target Remote File Systems. vm-test-run-nixos-test-niks3> builder # [ 5.754184] systemd[1]: Reached target Slice Units. vm-test-run-nixos-test-niks3> builder # [ 5.754915] systemd[1]: Reached target Swaps. vm-test-run-nixos-test-niks3> builder # [ 5.756969] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-nixos-test-niks3> builder # [ 5.759376] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-nixos-test-niks3> builder # [ 5.761080] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-nixos-test-niks3> builder # [ 5.762981] systemd[1]: Listening on Factory Reset Management. vm-test-run-nixos-test-niks3> builder # [ 5.763932] systemd[1]: Listening on Hostname Service Socket. vm-test-run-nixos-test-niks3> builder # [ 5.766816] systemd[1]: Starting Journal Log Access Socket... vm-test-run-nixos-test-niks3> builder # [ 5.768397] systemd[1]: Listening on Journal Audit Socket. vm-test-run-nixos-test-niks3> builder # [ 5.770911] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-nixos-test-niks3> builder # [ 5.772284] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-nixos-test-niks3> builder # [ 5.773405] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 5.774716] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-nixos-test-niks3> builder # [ 5.778743] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-nixos-test-niks3> builder # [ 5.779786] systemd[1]: Listening on udev Control Socket. vm-test-run-nixos-test-niks3> builder # [ 5.780623] systemd[1]: Listening on udev Varlink Socket. vm-test-run-nixos-test-niks3> builder # [ 5.783011] systemd[1]: Mounting Huge Pages File System... vm-test-run-nixos-test-niks3> builder # [ 5.786587] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-nixos-test-niks3> builder # [ 5.794681] systemd[1]: Mounting Kernel Debug File System... vm-test-run-nixos-test-niks3> builder # [ 5.800883] systemd[1]: Mounting Kernel Trace File System... vm-test-run-nixos-test-niks3> builder # [ 5.807839] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-nixos-test-niks3> builder # [ 5.819806] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-nixos-test-niks3> builder # [ 5.822075] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-nixos-test-niks3> builder # [ 5.826181] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-nixos-test-niks3> builder # [ 5.833483] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-nixos-test-niks3> builder # [ 5.849111] systemd[1]: Mounting FUSE Control File System... vm-test-run-nixos-test-niks3> builder # [ 5.853013] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-nixos-test-niks3> builder # [ 5.863498] systemd[1]: Starting Journal Service... vm-test-run-nixos-test-niks3> builder # [ 5.868561] systemd[1]: Starting Load Kernel Modules... vm-test-run-nixos-test-niks3> builder # [ 5.874872] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-nixos-test-niks3> builder # [ 5.881777] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-nixos-test-niks3> builder # [ 5.884436] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> server # [ 5.862423] systemd[1]: initrd-switch-root.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 5.895636] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-nixos-test-niks3> server # [ 5.863845] systemd[1]: Stopped initrd-switch-root.service. vm-test-run-nixos-test-niks3> server # [ 5.865999] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. vm-test-run-nixos-test-niks3> builder # [ 5.900070] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-nixos-test-niks3> server # [ 5.868191] systemd[1]: Created slice Slice /system/getty. vm-test-run-nixos-test-niks3> server # [ 5.869645] systemd[1]: Created slice User and Session Slice. vm-test-run-nixos-test-niks3> builder # [ 5.903022] systemd[1]: Mounted Huge Pages File System. vm-test-run-nixos-test-niks3> server # [ 5.870618] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. vm-test-run-nixos-test-niks3> server # [ 5.871834] systemd[1]: Started Forward Password Requests to Wall Directory Watch. vm-test-run-nixos-test-niks3> server # [ 5.872933] systemd[1]: Expecting device /dev/hvc0... vm-test-run-nixos-test-niks3> server # [ 5.873706] systemd[1]: Expecting device /dev/ttyS0... vm-test-run-nixos-test-niks3> builder # [ 5.905888] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-nixos-test-niks3> server # [ 5.874482] systemd[1]: Reached target Local Encrypted Volumes. vm-test-run-nixos-test-niks3> server # [ 5.875316] systemd[1]: Stopped target initrd-fs.target. vm-test-run-nixos-test-niks3> builder # [ 5.907846] systemd[1]: Mounted Kernel Debug File System. vm-test-run-nixos-test-niks3> server # [ 5.876065] systemd[1]: Stopped target initrd-root-fs.target. vm-test-run-nixos-test-niks3> server # [ 5.876894] systemd[1]: Stopped target initrd-switch-root.target. vm-test-run-nixos-test-niks3> builder # [ 5.909772] systemd[1]: Mounted Kernel Trace File System. vm-test-run-nixos-test-niks3> server # [ 5.877774] systemd[1]: Reached target Virtual Machines and Containers. vm-test-run-nixos-test-niks3> builder # [ 5.911811] systemd[1]: Mounted FUSE Control File System. vm-test-run-nixos-test-niks3> builder # [ 5.917267] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-nixos-test-niks3> server # [ 5.878697] systemd[1]: Reached target Path Units. vm-test-run-nixos-test-niks3> builder # [ 5.922223] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-nixos-test-niks3> server # [ 5.891043] systemd[1]: Reached target Remote File Systems. vm-test-run-nixos-test-niks3> server # [ 5.891869] systemd[1]: Reached target Slice Units. vm-test-run-nixos-test-niks3> server # [ 5.892602] systemd[1]: Reached target Swaps. vm-test-run-nixos-test-niks3> server # [ 5.894696] systemd[1]: Listening on Query the User Interactively for a Password. vm-test-run-nixos-test-niks3> server # [ 5.897308] systemd[1]: Listening on Process Core Dump Socket. vm-test-run-nixos-test-niks3> server # [ 5.899112] systemd[1]: Listening on Credential Encryption/Decryption. vm-test-run-nixos-test-niks3> server # [ 5.901168] systemd[1]: Listening on Factory Reset Management. vm-test-run-nixos-test-niks3> server # [ 5.902082] systemd[1]: Listening on Hostname Service Socket. vm-test-run-nixos-test-niks3> server # [ 5.905126] systemd[1]: Starting Journal Log Access Socket... vm-test-run-nixos-test-niks3> server # [ 5.906754] systemd[1]: Listening on Journal Audit Socket. vm-test-run-nixos-test-niks3> server # [ 5.909461] systemd[1]: Listening on Console Output Muting Service Socket. vm-test-run-nixos-test-niks3> server # [ 5.911010] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. vm-test-run-nixos-test-niks3> server # [ 5.912171] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> server # [ 5.913509] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki vm-test-run-nixos-test-niks3> builder # [ 5.947506] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 5.948851] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-nixos-test-niks3> server # [ 5.917696] systemd[1]: Listening on Disk Repartitioning Service Socket. vm-test-run-nixos-test-niks3> server # [ 5.918768] systemd[1]: Listening on udev Control Socket. vm-test-run-nixos-test-niks3> server # [ 5.919669] systemd[1]: Listening on udev Varlink Socket. vm-test-run-nixos-test-niks3> builder # [ 5.954394] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-nixos-test-niks3> server # [ 5.922464] systemd[1]: Mounting Huge Pages File System... vm-test-run-nixos-test-niks3> server # [ 5.924968] systemd[1]: Mounting POSIX Message Queue File System... vm-test-run-nixos-test-niks3> server # [ 5.931614] systemd[1]: Mounting Kernel Debug File System... vm-test-run-nixos-test-niks3> server # [ 5.941548] systemd[1]: Mounting Kernel Trace File System... vm-test-run-nixos-test-niks3> builder # [ 5.974573] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-nixos-test-niks3> builder # [ 5.981937] EXT4-fs (vda): re-mounted af18eb89-4e0b-4e40-ac59-3e78dc639ab9. vm-test-run-nixos-test-niks3> server # [ 5.950103] systemd[1]: Starting Create List of Static Device Nodes... vm-test-run-nixos-test-niks3> builder # [ 5.991380] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-nixos-test-niks3> server # [ 5.960652] systemd[1]: Starting Load Kernel Module configfs... vm-test-run-nixos-test-niks3> builder # [ 5.993635] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-nixos-test-niks3> server # [ 5.963136] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm vm-test-run-nixos-test-niks3> builder # [ 5.995437] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-nixos-test-niks3> server # [ 5.968464] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-nixos-test-niks3> builder # [ 6.002946] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-nixos-test-niks3> server # [ 5.971603] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-nixos-test-niks3> builder # [ 6.004678] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 6.006862] systemd-journald[282]: Collecting audit messages is enabled. vm-test-run-nixos-test-niks3> server # [ 5.986685] systemd[1]: Mounting FUSE Control File System... vm-test-run-nixos-test-niks3> builder # [ 6.019841] loop: module loaded vm-test-run-nixos-test-niks3> server # [ 5.992879] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-nixos-test-niks3> builder # [ 6.040536] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-nixos-test-niks3> server # [ 6.015129] systemd[1]: Starting Journal Service... vm-test-run-nixos-test-niks3> builder # [ 6.048319] systemd[1]: Finished Load Kernel Modules. vm-test-run-nixos-test-niks3> server # [ 6.020802] systemd[1]: Starting Load Kernel Modules... vm-test-run-nixos-test-niks3> builder # [ 6.053675] systemd[1]: Starting Firewall... vm-test-run-nixos-test-niks3> builder # [ 5.919485] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-nixos-test-niks3> builder # [ 6.059155] systemd[1]: Starting Apply Kernel Variables... vm-test-run-nixos-test-niks3> builder # [ 6.060073] systemd[1]: Started Journal Service. vm-test-run-nixos-test-niks3> server # [ 6.028900] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... vm-test-run-nixos-test-niks3> builder # [ 5.927694] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 6.036085] systemd[1]: Starting Remount Root and Kernel File Systems... vm-test-run-nixos-test-niks3> server # [ 6.038254] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 5.936827] systemd-modules-load[283]: Inserted module 'loop' vm-test-run-nixos-test-niks3> builder # [ 5.939820] systemd-modules-load[283]: Inserted module 'tun' vm-test-run-nixos-test-niks3> server # [ 6.046372] systemd[1]: Starting Coldplug All udev Devices... vm-test-run-nixos-test-niks3> builder # [ 5.943306] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-nixos-test-niks3> server # [ 6.050827] systemd[1]: Listening on Journal Log Access Socket. vm-test-run-nixos-test-niks3> server # [ 6.053484] systemd[1]: Mounted Huge Pages File System. vm-test-run-nixos-test-niks3> server # [ 6.055385] systemd[1]: Mounted POSIX Message Queue File System. vm-test-run-nixos-test-niks3> server # [ 6.057789] systemd[1]: Mounted Kernel Debug File System. vm-test-run-nixos-test-niks3> server # [ 6.060670] systemd[1]: Mounted Kernel Trace File System. vm-test-run-nixos-test-niks3> builder # [ 5.960260] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-nixos-test-niks3> server # [ 6.063537] systemd[1]: Finished Create List of Static Device Nodes. vm-test-run-nixos-test-niks3> server # [ 6.066179] systemd[1]: Mounted FUSE Control File System. vm-test-run-nixos-test-niks3> server # [ 6.070372] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... vm-test-run-nixos-test-niks3> builder # [ 5.968139] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-nixos-test-niks3> builder # [ 5.976462] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-nixos-test-niks3> builder # [ 5.977428] systemd[1]: Reached target First Boot Complete. vm-test-run-nixos-test-niks3> server # [ 6.096736] systemd[1]: modprobe@configfs.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 6.099998] systemd[1]: Finished Load Kernel Module configfs. vm-test-run-nixos-test-niks3> server # [ 6.104916] systemd[1]: Mounting Kernel Configuration File System... vm-test-run-nixos-test-niks3> builder # [ 6.016701] systemd-oomd[284]: No swap; memory pressure usage will be degraded vm-test-run-nixos-test-niks3> builder # [ 6.156301] systemd-journald[282]: Received client request to flush runtime journal. vm-test-run-nixos-test-niks3> server # [ 6.130564] systemd[1]: Mounted Kernel Configuration File System. vm-test-run-nixos-test-niks3> server # [ 6.153310] EXT4-fs (vda): re-mounted 804d2349-e2fe-40a4-a923-8e73b709dcd3. vm-test-run-nixos-test-niks3> server # [ 6.154989] systemd-journald[281]: Collecting audit messages is enabled. vm-test-run-nixos-test-niks3> server # [ 6.166380] systemd[1]: Finished Remount Root and Kernel File Systems. vm-test-run-nixos-test-niks3> server # [ 6.168657] systemd[1]: Listening on Disk Image Download Service Socket. vm-test-run-nixos-test-niks3> server # [ 6.171412] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-nixos-test-niks3> server # [ 6.175504] loop: module loaded vm-test-run-nixos-test-niks3> server # [ 6.177775] systemd[1]: Starting Load/Save OS Random Seed... vm-test-run-nixos-test-niks3> server # [ 6.178640] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> server # [ 6.202859] systemd[1]: Started Journal Service. vm-test-run-nixos-test-niks3> server # [ 6.061976] systemd[1]: Queued start job for default target Multi-User System. vm-test-run-nixos-test-niks3> server # [ 6.068280] systemd[1]: systemd-journald.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 6.074429] systemd-modules-load[282]: Inserted module 'loop' vm-test-run-nixos-test-niks3> server # [ 6.080817] systemd[1]: Starting Flush Journal to Persistent Storage... vm-test-run-nixos-test-niks3> server # [ 6.092207] systemd-modules-load[282]: Inserted module 'tls' vm-test-run-nixos-test-niks3> server # [ 6.094987] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. vm-test-run-nixos-test-niks3> server # [ 6.103299] systemd[1]: Starting Create Static Device Nodes in /dev... vm-test-run-nixos-test-niks3> builder # [ 6.152279] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-nixos-test-niks3> builder # [ 6.156536] systemd[1]: Finished Apply Kernel Variables. vm-test-run-nixos-test-niks3> server # [ 6.259845] tun: Universal TUN/TAP device driver, 1.6 vm-test-run-nixos-test-niks3> builder # [ 6.158472] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-nixos-test-niks3> builder # [ 6.159943] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-nixos-test-niks3> builder # [ 6.163482] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-nixos-test-niks3> builder # [ 6.165152] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-nixos-test-niks3> server # [ 6.127401] systemd-modules-load[282]: Inserted module 'tun' vm-test-run-nixos-test-niks3> server # [ 6.133094] systemd[1]: Finished Load Kernel Modules. vm-test-run-nixos-test-niks3> server # [ 6.136134] systemd[1]: Starting Firewall... vm-test-run-nixos-test-niks3> server # [ 6.139341] systemd[1]: Starting Apply Kernel Variables... vm-test-run-nixos-test-niks3> server # [ 6.146250] systemd[1]: Finished Load/Save OS Random Seed. vm-test-run-nixos-test-niks3> server # [ 6.147170] systemd[1]: Reached target First Boot Complete. vm-test-run-nixos-test-niks3> server # [ 6.167261] systemd-oomd[283]: No swap; memory pressure usage will be degraded vm-test-run-nixos-test-niks3> server # [ 6.312579] systemd-journald[281]: Received client request to flush runtime journal. vm-test-run-nixos-test-niks3> builder # [ 6.215277] systemd-udevd[315]: Using default interface naming scheme 'v261'. vm-test-run-nixos-test-niks3> builder # [ 6.288178] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-nixos-test-niks3> server # [ 6.299255] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. vm-test-run-nixos-test-niks3> server # [ 6.301469] systemd[1]: Finished Apply Kernel Variables. vm-test-run-nixos-test-niks3> server # [ 6.302416] systemd[1]: Finished Create Static Device Nodes in /dev. vm-test-run-nixos-test-niks3> server # [ 6.304757] systemd[1]: Reached target Preparation for Local File Systems. vm-test-run-nixos-test-niks3> server # [ 6.306427] systemd[1]: Starting Rule-based Manager for Device Events and Files... vm-test-run-nixos-test-niks3> server # [ 6.307670] systemd[1]: Finished Flush Journal to Persistent Storage. vm-test-run-nixos-test-niks3> builder # [ 6.373940] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-nixos-test-niks3> server # [ 6.374664] systemd-udevd[312]: Using default interface naming scheme 'v261'. vm-test-run-nixos-test-niks3> builder # [ 6.460965] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-nixos-test-niks3> server # [ 6.449130] systemd[1]: Started Rule-based Manager for Device Events and Files. vm-test-run-nixos-test-niks3> builder # [ 6.554176] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-nixos-test-niks3> server # [ 6.518854] systemd[1]: Finished Coldplug All udev Devices. vm-test-run-nixos-test-niks3> builder # [ 6.570379] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-nixos-test-niks3> builder # [ 6.593516] systemd[1]: Mounting /run/wrappers... vm-test-run-nixos-test-niks3> builder # [ 6.605735] (udev-worker)[348]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-nixos-test-niks3> builder # [ 6.615326] (udev-worker)[348]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> builder # [ 6.620953] (udev-worker)[346]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> builder # [ 6.640334] systemd[1]: Mounted /run/wrappers. vm-test-run-nixos-test-niks3> builder # [ 6.642389] systemd[1]: Reached target Local File Systems. vm-test-run-nixos-test-niks3> builder # [ 6.645067] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-nixos-test-niks3> builder # [ 6.653138] systemd[1]: Starting register-nix-paths.service... vm-test-run-nixos-test-niks3> server # [ 6.619569] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse vm-test-run-nixos-test-niks3> builder # [ 6.660236] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-nixos-test-niks3> builder # [ 6.661071] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-nixos-test-niks3> builder # [ 6.667773] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-nixos-test-niks3> builder # [ 6.676201] systemd[1]: Starting Create System Files and Directories... vm-test-run-nixos-test-niks3> server # [ 6.708241] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. vm-test-run-nixos-test-niks3> server # [ 6.725819] systemd[1]: Mounting /run/wrappers... vm-test-run-nixos-test-niks3> server # [ 6.738572] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. vm-test-run-nixos-test-niks3> server # [ 6.766204] systemd[1]: Mounted /run/wrappers. vm-test-run-nixos-test-niks3> builder # [ 6.805299] systemd[1]: Finished Create System Files and Directories. vm-test-run-nixos-test-niks3> server # [ 6.768309] systemd[1]: Reached target Local File Systems. vm-test-run-nixos-test-niks3> builder # [ 6.808974] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-nixos-test-niks3> server # [ 6.770446] systemd[1]: Listening on Boot Loader Control Service Socket. vm-test-run-nixos-test-niks3> builder # [ 6.812218] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-nixos-test-niks3> server # [ 6.773871] systemd[1]: Starting register-nix-paths.service... vm-test-run-nixos-test-niks3> server # [ 6.776281] systemd[1]: Starting Create SUID/SGID Wrappers... vm-test-run-nixos-test-niks3> server # [ 6.779044] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-nixos-test-niks3> server # [ 6.782110] systemd[1]: Starting Save Transient machine-id to Disk... vm-test-run-nixos-test-niks3> server # [ 6.784754] systemd[1]: Starting Create System Files and Directories... vm-test-run-nixos-test-niks3> builder # [ 6.842065] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 6.845566] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-nixos-test-niks3> builder # [ 6.887400] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-nixos-test-niks3> server # [ 6.877227] (udev-worker)[356]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. vm-test-run-nixos-test-niks3> server # [ 6.883194] (udev-worker)[356]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> server # [ 6.889467] (udev-worker)[357]: Network interface NamePolicy= disabled on kernel command line. vm-test-run-nixos-test-niks3> server # [ 6.893590] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 6.897222] systemd[1]: Finished Save Transient machine-id to Disk. vm-test-run-nixos-test-niks3> builder # [ 6.943310] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-nixos-test-niks3> builder # [ 6.946132] systemd[1]: Starting Update is Completed... vm-test-run-nixos-test-niks3> builder # [ 6.956050] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-nixos-test-niks3> builder # [ 6.957256] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-nixos-test-niks3> builder # [ 6.958888] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-nixos-test-niks3> builder # [ 6.960957] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-nixos-test-niks3> builder # [ 6.964222] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-nixos-test-niks3> builder # [ 6.966573] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 6.969155] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> server # [ 6.944160] systemd[1]: Finished Create System Files and Directories. vm-test-run-nixos-test-niks3> server # [ 6.949396] systemd[1]: Starting Rebuild Journal Catalog... vm-test-run-nixos-test-niks3> server # [ 6.952409] systemd[1]: Starting Record System Boot/Shutdown in UTMP... vm-test-run-nixos-test-niks3> builder # [ 7.018219] systemd[1]: Finished Update is Completed. vm-test-run-nixos-test-niks3> server # [ 7.033848] systemd[1]: Finished Record System Boot/Shutdown in UTMP. vm-test-run-nixos-test-niks3> server # [ 7.088072] systemd[1]: Finished Rebuild Journal Catalog. vm-test-run-nixos-test-niks3> server # [ 7.092491] systemd[1]: Starting Update is Completed... vm-test-run-nixos-test-niks3> builder # [ 7.136211] systemd[1]: Finished Firewall. vm-test-run-nixos-test-niks3> server # [ 7.162076] systemd[1]: Finished Update is Completed. vm-test-run-nixos-test-niks3> builder # [ 7.361671] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-nixos-test-niks3> builder # [ 7.375110] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console vm-test-run-nixos-test-niks3> builder # [ 7.247241] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 7.248428] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-nixos-test-niks3> builder # [ 7.399981] ACPI: button: Power Button [PWRF] vm-test-run-nixos-test-niks3> builder # [ 7.285782] systemd[1]: Finished register-nix-paths.service. vm-test-run-nixos-test-niks3> builder # [ 7.290682] systemd[1]: Reached target System Initialization. vm-test-run-nixos-test-niks3> builder # [ 7.291636] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-nixos-test-niks3> builder # [ 7.292665] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-nixos-test-niks3> builder # [ 7.294408] systemd[1]: Reached target Timer Units. vm-test-run-nixos-test-niks3> builder # [ 7.295392] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-nixos-test-niks3> server # [ 7.256123] systemd[1]: Condition check resulted in Virtio network device being skipped. vm-test-run-nixos-test-niks3> server # [ 7.257306] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore vm-test-run-nixos-test-niks3> builder # [ 7.298301] systemd[1]: Starting niks3 auto-upload socket... vm-test-run-nixos-test-niks3> server # [ 7.259229] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. vm-test-run-nixos-test-niks3> builder # [ 7.300581] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-nixos-test-niks3> server # [ 7.261204] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 vm-test-run-nixos-test-niks3> builder # [ 7.302175] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-nixos-test-niks3> builder # [ 7.303947] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-nixos-test-niks3> server # [ 7.264766] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore vm-test-run-nixos-test-niks3> builder # [ 7.304888] systemd[1]: Listening on niks3 auto-upload socket. vm-test-run-nixos-test-niks3> server # [ 7.266305] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 7.307100] systemd[1]: Reached target Socket Units. vm-test-run-nixos-test-niks3> server # [ 7.268430] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os vm-test-run-nixos-test-niks3> builder # [ 7.357715] dbus-broker-launch[504]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-nixos-test-niks3> builder # [ 7.361982] dbus-broker-launch[504]: NSS returned no entry for 'systemd-timesync' vm-test-run-nixos-test-niks3> builder # [ 7.363125] dbus-broker-launch[504]: Invalid user-name in /nix/store/w7zpn81qlzxwipwrzrqxs1rw0fs02pwi-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-nixos-test-niks3> builder # [ 7.374505] systemd[1]: Started D-Bus System Message Bus. vm-test-run-nixos-test-niks3> builder # [ 7.376743] systemd[1]: Reached target Basic System. vm-test-run-nixos-test-niks3> builder # [ 7.379798] systemd[1]: Started backdoor.service. vm-test-run-nixos-test-niks3> builder # [ 7.382199] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-nixos-test-niks3> builder # [ 7.387097] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-nixos-test-niks3> builder # [ 7.418124] mousedev: PS/2 mouse device common for all mice vm-test-run-nixos-test-niks3> builder # [ 7.501110] rtc_cmos PNP0B00:00: RTC can wake from S4 vm-test-run-nixos-test-niks3> builder # [ 7.520452] rtc_cmos PNP0B00:00: registered as rtc0 vm-test-run-nixos-test-niks3> builder # [ 7.520546] rtc_cmos PNP0B00:00: setting system clock to 2026-10-01T10:20:48 UTC (1790850048) vm-test-run-nixos-test-niks3> builder # [ 7.520624] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-nixos-test-niks3> builder # [ 7.451555] systemd[1]: Starting Post-Boot Actions... vm-test-run-nixos-test-niks3> server # [ 7.419835] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 7.421441] systemd[1]: Finished Create SUID/SGID Wrappers. vm-test-run-nixos-test-niks3> builder # [ 7.465446] dbus-broker-launch[504]: Ready vm-test-run-nixos-test-niks3> builder # [ 7.485800] systemd[1]: Started Reset console on configuration changes. vm-test-run-nixos-test-niks3> builder # [ 7.492155] systemd[1]: Starting resolvconf update... vm-test-run-nixos-test-niks3> server # [ 7.460556] systemd[1]: Finished Firewall. vm-test-run-nixos-test-niks3> server # [ 7.470594] systemd[1]: Finished register-nix-paths.service. vm-test-run-nixos-test-niks3> builder # [ 7.523460] systemd-journald[282]: Time jumped backwards, rotating. vm-test-run-nixos-test-niks3> builder # [ 7.542707] Console: switching to colour dummy device 80x25 vm-test-run-nixos-test-niks3> builder # [ 7.575027] parport_pc 00:02: reported by Plug and Play ACPI vm-test-run-nixos-test-niks3> builder # [ 7.575124] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-nixos-test-niks3> server # [ 7.473125] systemd[1]: Reached target System Initialization. vm-test-run-nixos-test-niks3> server # [ 7.473913] systemd[1]: Started Discard unused filesystem blocks once a week. vm-test-run-nixos-test-niks3> server # [ 7.475128] systemd[1]: Started niks3 garbage collection timer. vm-test-run-nixos-test-niks3> server # [ 7.477725] systemd[1]: Started Daily Cleanup of Temporary Directories. vm-test-run-nixos-test-niks3> server # [ 7.478731] systemd[1]: Reached target Timer Units. vm-test-run-nixos-test-niks3> server # [ 7.479774] systemd[1]: Listening on D-Bus System Message Bus Socket. vm-test-run-nixos-test-niks3> server # [ 7.482202] systemd[1]: Starting niks3 server proxy socket... vm-test-run-nixos-test-niks3> builder # [ 7.520371] nsncd[508]: Oct 01 10:20:48.634 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-nixos-test-niks3> server # [ 7.486392] systemd[1]: Listening on niks3 server socket. vm-test-run-nixos-test-niks3> builder # [ 7.526670] systemd[1]: Finished Post-Boot Actions. vm-test-run-nixos-test-niks3> server # [ 7.632533] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 vm-test-run-nixos-test-niks3> builder # [ 7.530961] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-nixos-test-niks3> server # [ 7.494407] systemd[1]: Listening on Nix Daemon Socket. vm-test-run-nixos-test-niks3> builder # connecting to host... vm-test-run-nixos-test-niks3> builder # [ 7.536113] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-nixos-test-niks3> server # [ 7.497207] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. vm-test-run-nixos-test-niks3> server # [ 7.498383] systemd[1]: Listening on niks3 server proxy socket. vm-test-run-nixos-test-niks3> builder # [ 7.536992] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-nixos-test-niks3> server # [ 7.500248] systemd[1]: Reached target Socket Units. vm-test-run-nixos-test-niks3> server # [ 7.501065] systemd[1]: Starting D-Bus System Message Bus... vm-test-run-nixos-test-niks3> builder # [ 7.539669] systemd[1]: Starting User Login Management... vm-test-run-nixos-test-niks3> server # [ 7.668727] ACPI: button: Power Button [PWRF] vm-test-run-nixos-test-niks3> builder # [ 7.567522] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-nixos-test-niks3> builder # [ 7.609705] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized vm-test-run-nixos-test-niks3> builder # [ 7.680061] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input4 vm-test-run-nixos-test-niks3> server # [ 7.553468] dbus-broker-launch[514]: Looking up NSS user entry for 'systemd-timesync'... vm-test-run-nixos-test-niks3> server # [ 7.557595] dbus-broker-launch[514]: NSS returned no entry for 'systemd-timesync' vm-test-run-nixos-test-niks3> server # [ 7.559132] dbus-broker-launch[514]: Invalid user-name in /nix/store/lpjdfpi0wwb091cs91sdv38g1l26f07s-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" vm-test-run-nixos-test-niks3> builder # [ 7.737854] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-nixos-test-niks3> builder # [ 7.737856] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-nixos-test-niks3> server # [ 7.712285] mousedev: PS/2 mouse device common for all mice vm-test-run-nixos-test-niks3> builder # [ 7.747944] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic vm-test-run-nixos-test-niks3> builder # [ 7.769843] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 vm-test-run-nixos-test-niks3> server # [ 7.600115] systemd[1]: Started D-Bus System Message Bus. vm-test-run-nixos-test-niks3> server # [ 7.601312] systemd[1]: Reached target Basic System. vm-test-run-nixos-test-niks3> server # [ 7.606328] systemd[1]: Started backdoor.service. vm-test-run-nixos-test-niks3> server # [ 7.608789] systemd[1]: Starting Import lastlog data into lastlog2 database... vm-test-run-nixos-test-niks3> server # [ 7.611467] systemd[1]: Starting Generate test mTLS certs... vm-test-run-nixos-test-niks3> server # [ 7.616102] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-nixos-test-niks3> builder # [ 7.657319] systemd-logind[529]: New seat seat0. vm-test-run-nixos-test-niks3> server # [ 7.620163] systemd[1]: Starting Post-Boot Actions... vm-test-run-nixos-test-niks3> builder # [ 7.662458] systemd[1]: Started User Login Management. vm-test-run-nixos-test-niks3> builder # [ 7.663927] systemd[1]: Starting linger-users.service... vm-test-run-nixos-test-niks3> server # [ 7.627301] systemd[1]: Started Reset console on configuration changes. vm-test-run-nixos-test-niks3> server # [ 7.631193] systemd[1]: Starting resolvconf update... vm-test-run-nixos-test-niks3> builder # [ 7.690024] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-nixos-test-niks3> builder # [ 7.690943] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-nixos-test-niks3> builder # [ 7.693383] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-nixos-test-niks3> builder # [ 7.695771] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-nixos-test-niks3> builder # [ 7.699273] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-nixos-test-niks3> builder # [ 7.702197] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 7.704615] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-nixos-test-niks3> builder # [ 7.706501] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-nixos-test-niks3> server # [ 7.683594] dbus-broker-launch[514]: Ready vm-test-run-nixos-test-niks3> builder # [ 7.726167] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 7.727765] systemd[1]: Finished linger-users.service. vm-test-run-nixos-test-niks3> server # [ 7.841877] rtc_cmos PNP0B00:00: RTC can wake from S4 vm-test-run-nixos-test-niks3> builder # [ 7.761523] nsncd[580]: Oct 01 10:20:48.874 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-nixos-test-niks3> builder # [ 7.764618] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-nixos-test-niks3> builder # [ 7.765544] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-nixos-test-niks3> builder # [ 7.767118] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-nixos-test-niks3> server # [ 7.740477] systemd[1]: Finished Post-Boot Actions. vm-test-run-nixos-test-niks3> server # [ 7.885896] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console vm-test-run-nixos-test-niks3> builder # [ 7.786974] systemd[1]: Finished resolvconf update. vm-test-run-nixos-test-niks3> builder # [ 7.787786] systemd[1]: Reached target Preparation for Network. vm-test-run-nixos-test-niks3> builder # [ 7.789230] systemd[1]: Starting DHCP Client... vm-test-run-nixos-test-niks3> builder # [ 7.792075] systemd[1]: Starting Address configuration of eth1... vm-test-run-nixos-test-niks3> builder # [ 7.796120] systemd[1]: Starting Extra networking commands.... vm-test-run-nixos-test-niks3> server # [ 7.906087] rtc_cmos PNP0B00:00: registered as rtc0 vm-test-run-nixos-test-niks3> server # connecting to host... vm-test-run-nixos-test-niks3> server # [ 7.910917] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized vm-test-run-nixos-test-niks3> server # [ 7.773233] nsncd[520]: Oct 01 10:20:49.094 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-nixos-test-niks3> server # [ 7.777889] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-nixos-test-niks3> server # [ 7.780485] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-nixos-test-niks3> server # [ 7.782452] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-nixos-test-niks3> server # [ 7.785321] systemd[1]: Starting User Login Management... vm-test-run-nixos-test-niks3> server: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-nixos-test-niks3> server: connected to guest root shell vm-test-run-nixos-test-niks3> server: (connecting took 8.54 seconds) vm-test-run-nixos-test-niks3> server: (finished: waiting for the VM to finish booting, in 8.54 seconds) vm-test-run-nixos-test-niks3> builder # [ 7.888318] network-addresses-eth1-start[608]: adding address 192.168.1.1/24... done vm-test-run-nixos-test-niks3> builder # [ 7.903631] network-addresses-eth1-start[608]: adding address 2001:db8:1::1/64... done vm-test-run-nixos-test-niks3> server # [ 7.881925] niks3-test-certs-start[533]: ----- vm-test-run-nixos-test-niks3> builder # [ 7.924284] systemd[1]: Finished Address configuration of eth1. vm-test-run-nixos-test-niks3> server # [ 7.903277] systemd[1]: Finished Import lastlog data into lastlog2 database. vm-test-run-nixos-test-niks3> server # [ 7.904593] niks3-test-certs-start[559]: ----- vm-test-run-nixos-test-niks3> builder # [ 7.941790] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt vm-test-run-nixos-test-niks3> builder # [ 7.941910] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-nixos-test-niks3> builder # [ 8.086484] Console: switching to colour frame buffer device 160x50 vm-test-run-nixos-test-niks3> builder # [ 8.130197] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-nixos-test-niks3> server # [ 7.969339] niks3-test-certs-start[573]: Certificate request self-signature ok vm-test-run-nixos-test-niks3> server # [ 7.972699] niks3-test-certs-start[573]: subject=CN=server vm-test-run-nixos-test-niks3> builder # [ 8.012072] dhcpcd[617]: dhcpcd-10.3.2 starting vm-test-run-nixos-test-niks3> builder # [ 8.012837] systemd[1]: Finished Extra networking commands.. vm-test-run-nixos-test-niks3> builder # [ 8.015948] systemd[1]: Reached target Network. vm-test-run-nixos-test-niks3> builder # [ 8.017128] systemd[1]: Starting Permit User Sessions... vm-test-run-nixos-test-niks3> builder # [ 8.025686] dhcpcd[675]: dev: loaded udev vm-test-run-nixos-test-niks3> builder # [ 8.036103] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> builder # [ 8.130480] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-nixos-test-niks3> builder # [ 8.178202] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-nixos-test-niks3> builder # [ 8.184942] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-nixos-test-niks3> builder # [ 8.186511] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-nixos-test-niks3> builder # [ 8.089569] systemd[1]: Finished Permit User Sessions. vm-test-run-nixos-test-niks3> builder # [ 8.102295] systemd[1]: Started Getty on tty1. vm-test-run-nixos-test-niks3> builder # [ 8.102941] systemd[1]: Reached target Login Prompts. vm-test-run-nixos-test-niks3> server # [ 7.950145] rtc_cmos PNP0B00:00: setting system clock to 2026-10-01T10:20:48 UTC (1790850048) vm-test-run-nixos-test-niks3> builder # [ 8.181839] systemd-logind[529]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-nixos-test-niks3> builder # [ 8.328672] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-nixos-test-niks3> builder # [ 8.195725] systemd-logind[529]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-nixos-test-niks3> builder # [ 8.212132] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 7.950251] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs vm-test-run-nixos-test-niks3> server # [ 7.953642] systemd-journald[281]: Time jumped backwards, rotating. vm-test-run-nixos-test-niks3> server # [ 7.965643] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input4 vm-test-run-nixos-test-niks3> builder # [ 8.215175] systemd[1]: Stopped Virtual Console Setup. vm-test-run-nixos-test-niks3> builder # [ 8.220763] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> builder # [ 8.378628] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-nixos-test-niks3> builder # [ 8.379280] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-nixos-test-niks3> builder # [ 8.381511] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-nixos-test-niks3> builder # [ 8.382332] cfg80211: failed to load regulatory.db vm-test-run-nixos-test-niks3> server # [ 8.018350] parport_pc 00:02: reported by Plug and Play ACPI vm-test-run-nixos-test-niks3> server # [ 8.018443] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] vm-test-run-nixos-test-niks3> server # [ 8.281609] Console: switching to colour dummy device 80x25 vm-test-run-nixos-test-niks3> builder # [ 8.436239] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-nixos-test-niks3> builder # [ 8.303945] dhcpcd[675]: eth0: waiting for carrier vm-test-run-nixos-test-niks3> builder # [ 8.305125] dhcpcd[675]: libudev: received NULL device vm-test-run-nixos-test-niks3> builder # [ 8.305829] dhcpcd[675]: libudev: received NULL device vm-test-run-nixos-test-niks3> builder # [ 8.307812] dhcpcd[675]: eth0: carrier acquired vm-test-run-nixos-test-niks3> builder # [ 8.444359] ppdev: user-space parallel port driver vm-test-run-nixos-test-niks3> builder # [ 8.318199] dhcpcd[675]: DUID 00:01:00:01:32:50:f0:81:52:54:00:12:34:56 vm-test-run-nixos-test-niks3> builder # [ 8.319121] dhcpcd[675]: eth0: IAID 00:12:34:56 vm-test-run-nixos-test-niks3> builder # [ 8.319777] dhcpcd[675]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-nixos-test-niks3> builder # [ 8.464891] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) vm-test-run-nixos-test-niks3> server # [ 8.308297] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt vm-test-run-nixos-test-niks3> server # [ 8.308416] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD vm-test-run-nixos-test-niks3> builder # [ 8.345329] systemd-logind[529]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-nixos-test-niks3> builder # [ 8.483092] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) vm-test-run-nixos-test-niks3> server # [ 8.426023] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 vm-test-run-nixos-test-niks3> builder # [ 8.387925] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-nixos-test-niks3> builder # [ 8.401335] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 8.403984] systemd[1]: Stopped Virtual Console Setup. vm-test-run-nixos-test-niks3> builder # [ 8.410162] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> server # [ 8.426295] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 vm-test-run-nixos-test-niks3> server # [ 8.542811] 8021q: 802.1Q VLAN Support v1.8 vm-test-run-nixos-test-niks3> server # [ 8.542829] 8021q: adding VLAN 0 to HW filter on device eth1 vm-test-run-nixos-test-niks3> builder # [ 8.642923] kvm_amd: TSC scaling supported vm-test-run-nixos-test-niks3> builder # [ 8.643460] kvm_amd: Nested Virtualization enabled vm-test-run-nixos-test-niks3> builder # [ 8.643951] kvm_amd: Nested Paging enabled vm-test-run-nixos-test-niks3> builder # [ 8.644732] kvm_amd: LBR virtualization supported vm-test-run-nixos-test-niks3> builder # [ 8.645168] kvm_amd: Virtual VMLOAD VMSAVE supported vm-test-run-nixos-test-niks3> builder # [ 8.645914] kvm_amd: Virtual GIF supported vm-test-run-nixos-test-niks3> builder # [ 8.646293] kvm_amd: Virtual NMI enabled vm-test-run-nixos-test-niks3> builder # [ 8.671886] EDAC MC: Ver: 3.0.0 vm-test-run-nixos-test-niks3> builder # [ 8.595292] systemd-vconsole-setup[701]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-nixos-test-niks3> builder # [ 8.599559] systemd[1]: Finished Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 8.677719] cfg80211: Loading compiled-in X.509 certificates for regulatory database vm-test-run-nixos-test-niks3> server # [ 8.717217] [drm] Found bochs VGA, ID 0xb0c5. vm-test-run-nixos-test-niks3> server # [ 8.717219] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. vm-test-run-nixos-test-niks3> server # [ 8.726425] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' vm-test-run-nixos-test-niks3> server # [ 8.726541] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' vm-test-run-nixos-test-niks3> server # [ 8.729009] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 vm-test-run-nixos-test-niks3> server # [ 8.729017] cfg80211: failed to load regulatory.db vm-test-run-nixos-test-niks3> server # [ 8.000586] niks3-test-certs-start[594]: ----- vm-test-run-nixos-test-niks3> server # [ 8.608672] dhcpcd[643]: dhcpcd-10.3.2 starting vm-test-run-nixos-test-niks3> server # [ 8.612292] niks3-test-certs-start[595]: Certificate request self-signature ok vm-test-run-nixos-test-niks3> server # [ 8.620420] niks3-test-certs-start[595]: subject=CN=niks3 test client vm-test-run-nixos-test-niks3> server # [ 8.621448] systemd[1]: Stopped target Host and Network Name Lookups. vm-test-run-nixos-test-niks3> server # [ 8.632724] dhcpcd[701]: dev: loaded udev vm-test-run-nixos-test-niks3> server # [ 8.639652] systemd[1]: Stopping Host and Network Name Lookups... vm-test-run-nixos-test-niks3> server # [ 8.641877] nsncd[603]: Oct 01 10:20:48.800 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" vm-test-run-nixos-test-niks3> server # [ 8.651651] systemd[1]: Stopped target User and Group Name Lookups. vm-test-run-nixos-test-niks3> server # [ 8.659629] network-addresses-eth1-start[634]: adding address 192.168.1.2/24... done vm-test-run-nixos-test-niks3> server # [ 8.661400] network-addresses-eth1-start[634]: adding address 2001:db8:1::2/64... done vm-test-run-nixos-test-niks3> server # [ 8.807054] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic vm-test-run-nixos-test-niks3> server # [ 8.807776] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 vm-test-run-nixos-test-niks3> server # [ 8.666590] systemd[1]: Stopping User and Group Name Lookups... vm-test-run-nixos-test-niks3> server # [ 8.672459] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... vm-test-run-nixos-test-niks3> server # [ 8.679117] systemd[1]: nscd.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 8.681249] systemd[1]: Stopped Name Service Cache Daemon (nsncd). vm-test-run-nixos-test-niks3> server # [ 8.686071] systemd[1]: Starting Name Service Cache Daemon (nsncd)... vm-test-run-nixos-test-niks3> server # [ 8.689475] systemd[1]: Started Name Service Cache Daemon (nsncd). vm-test-run-nixos-test-niks3> server # [ 8.694927] systemd[1]: Reached target Host and Network Name Lookups. vm-test-run-nixos-test-niks3> server # [ 8.701488] systemd[1]: Reached target User and Group Name Lookups. vm-test-run-nixos-test-niks3> server # [ 8.705540] systemd[1]: Finished Generate test mTLS certs. vm-test-run-nixos-test-niks3> server # [ 8.714104] systemd[1]: Finished resolvconf update. vm-test-run-nixos-test-niks3> server # [ 8.719707] systemd[1]: Reached target Preparation for Network. vm-test-run-nixos-test-niks3> server # [ 8.720763] systemd[1]: Starting DHCP Client... vm-test-run-nixos-test-niks3> server # [ 8.726515] systemd[1]: Starting Address configuration of eth1... vm-test-run-nixos-test-niks3> server # [ 8.730939] systemd[1]: Starting Extra networking commands.... vm-test-run-nixos-test-niks3> server # [ 8.734064] systemd[1]: Finished Address configuration of eth1. vm-test-run-nixos-test-niks3> server # [ 8.734834] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> server # [ 8.735626] systemd[1]: Finished Extra networking commands.. vm-test-run-nixos-test-niks3> server # [ 8.740874] systemd[1]: Reached target Network. vm-test-run-nixos-test-niks3> server # [ 8.741882] systemd[1]: Started Mock OIDC server for testing. vm-test-run-nixos-test-niks3> server # [ 8.744995] systemd[1]: Starting Nginx Web Server... vm-test-run-nixos-test-niks3> server # [ 8.746515] systemd[1]: Starting PostgreSQL Server... vm-test-run-nixos-test-niks3> server # [ 8.750464] systemd[1]: Started RustFS S3-compatible object storage. vm-test-run-nixos-test-niks3> server # [ 8.751322] systemd[1]: Starting Setup RustFS bucket... vm-test-run-nixos-test-niks3> server # [ 8.751996] systemd[1]: Starting Permit User Sessions... vm-test-run-nixos-test-niks3> server # [ 8.752732] systemd[1]: Finished Permit User Sessions. vm-test-run-nixos-test-niks3> server # [ 8.753463] systemd[1]: Started Getty on tty1. vm-test-run-nixos-test-niks3> server # [ 8.760453] systemd[1]: Reached target Login Prompts. vm-test-run-nixos-test-niks3> server # [ 8.762373] systemd-logind[546]: New seat seat0. vm-test-run-nixos-test-niks3> server # [ 8.769270] systemd[1]: Started User Login Management. vm-test-run-nixos-test-niks3> server # [ 8.769985] systemd-logind[546]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) vm-test-run-nixos-test-niks3> server # [ 8.773325] systemd[1]: Starting linger-users.service... vm-test-run-nixos-test-niks3> server # [ 8.776362] systemd-logind[546]: Watching system buttons on /dev/input/event2 (Power Button) vm-test-run-nixos-test-niks3> server # [ 8.801220] systemd[1]: linger-users.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 8.803985] systemd[1]: Finished linger-users.service. vm-test-run-nixos-test-niks3> server # [ 8.976123] 8021q: adding VLAN 0 to HW filter on device eth0 vm-test-run-nixos-test-niks3> server # [ 8.844470] dhcpcd[701]: libudev: received NULL device vm-test-run-nixos-test-niks3> server # [ 8.845237] dhcpcd[701]: eth0: waiting for carrier vm-test-run-nixos-test-niks3> server # [ 8.845890] dhcpcd[701]: libudev: received NULL device vm-test-run-nixos-test-niks3> server # [ 8.846719] dhcpcd[701]: eth0: carrier acquired vm-test-run-nixos-test-niks3> server # [ 8.882178] dhcpcd[701]: DUID 00:01:00:01:32:50:f0:81:52:54:00:12:34:56 vm-test-run-nixos-test-niks3> server # [ 8.884812] dhcpcd[701]: eth0: IAID 00:12:34:56 vm-test-run-nixos-test-niks3> server # [ 8.886432] dhcpcd[701]: eth0: adding address fe80::5054:ff:fe12:3456 vm-test-run-nixos-test-niks3> server # [ 8.975282] mock-oidc-server[697]: Mock OIDC Server running vm-test-run-nixos-test-niks3> server # [ 8.978419] mock-oidc-server[697]: OIDC Address: 127.0.0.1:8080 vm-test-run-nixos-test-niks3> server # [ 8.979390] mock-oidc-server[697]: Issue Address: 127.0.0.1:8081 vm-test-run-nixos-test-niks3> server # [ 8.980190] mock-oidc-server[697]: Issuer: http://127.0.0.1:8080/oidc vm-test-run-nixos-test-niks3> server # [ 8.980966] mock-oidc-server[697]: JWKS: http://127.0.0.1:8080/oidc/.well-known/jwks.json vm-test-run-nixos-test-niks3> server # [ 8.985207] mock-oidc-server[697]: Discovery: http://127.0.0.1:8080/oidc/.well-known/openid-configuration vm-test-run-nixos-test-niks3> server # [ 8.986821] mock-oidc-server[697]: Issue tokens: http://127.0.0.1:8081/issue?sub=... vm-test-run-nixos-test-niks3> server # [ 9.000826] dhcpcd[701]: eth0: soliciting a DHCP lease vm-test-run-nixos-test-niks3> server # [ 9.004535] nginx-pre-start[734]: nginx: the configuration file /nix/store/zrm3va7lbl0i91k5xpvb2sg2jw58nznn-nginx.conf syntax is ok vm-test-run-nixos-test-niks3> server # [ 9.006364] nginx-pre-start[734]: nginx: configuration file /nix/store/zrm3va7lbl0i91k5xpvb2sg2jw58nznn-nginx.conf test is successful vm-test-run-nixos-test-niks3> server # [ 9.024101] systemd[1]: Started Nginx Web Server. vm-test-run-nixos-test-niks3> server # [ 9.034704] dhcpcd[701]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-nixos-test-niks3> server # [ 9.038213] dhcpcd[701]: eth0: probing address 10.0.2.15/24 vm-test-run-nixos-test-niks3> server # [ 9.054202] postgresql-pre-start[743]: The files belonging to this database system will be owned by user "postgres". vm-test-run-nixos-test-niks3> server # [ 9.057724] postgresql-pre-start[743]: This user must also own the server process. vm-test-run-nixos-test-niks3> server # [ 9.060413] postgresql-pre-start[743]: The database cluster will be initialized with locale "en_US.UTF-8". vm-test-run-nixos-test-niks3> server # [ 9.061723] postgresql-pre-start[743]: The default database encoding has accordingly been set to "UTF8". vm-test-run-nixos-test-niks3> server # [ 9.063771] postgresql-pre-start[743]: The default text search configuration will be set to "english". vm-test-run-nixos-test-niks3> server # [ 9.064958] postgresql-pre-start[743]: Data page checksums are enabled. vm-test-run-nixos-test-niks3> server # [ 9.066449] postgresql-pre-start[743]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok vm-test-run-nixos-test-niks3> server # [ 9.068845] postgresql-pre-start[743]: creating subdirectories ... ok vm-test-run-nixos-test-niks3> server # [ 9.071147] postgresql-pre-start[743]: selecting dynamic shared memory implementation ... posix vm-test-run-nixos-test-niks3> server # [ 9.169655] NET: Registered PF_PACKET protocol family vm-test-run-nixos-test-niks3> server # [ 9.248945] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) vm-test-run-nixos-test-niks3> server # [ 9.263034] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) vm-test-run-nixos-test-niks3> server # [ 9.362296] ppdev: user-space parallel port driver vm-test-run-nixos-test-niks3> server # [ 9.369701] Console: switching to colour frame buffer device 160x50 vm-test-run-nixos-test-niks3> server # [ 9.471720] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device vm-test-run-nixos-test-niks3> server # [ 9.087253] systemd-vconsole-setup[690]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-nixos-test-niks3> server # [ 9.336499] systemd-logind[546]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) vm-test-run-nixos-test-niks3> server # [ 9.341757] postgresql-pre-start[743]: selecting default "max_connections" ... 100 vm-test-run-nixos-test-niks3> server # [ 9.345699] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. vm-test-run-nixos-test-niks3> server # [ 9.347932] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 9.350428] systemd[1]: Stopped Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 9.351892] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> server # [ 9.416232] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 9.417453] systemd[1]: Stopped Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 9.425026] systemd[1]: Starting Virtual Console Setup... vm-test-run-nixos-test-niks3> server # [ 9.457291] postgresql-pre-start[743]: selecting default "shared_buffers" ... 128MB vm-test-run-nixos-test-niks3> builder # [ 9.604360] dhcpcd[675]: eth0: soliciting a DHCP lease vm-test-run-nixos-test-niks3> server # [ 9.710210] kvm_amd: TSC scaling supported vm-test-run-nixos-test-niks3> server # [ 9.710856] kvm_amd: Nested Virtualization enabled vm-test-run-nixos-test-niks3> server # [ 9.712204] kvm_amd: Nested Paging enabled vm-test-run-nixos-test-niks3> server # [ 9.713639] kvm_amd: LBR virtualization supported vm-test-run-nixos-test-niks3> server # [ 9.714118] kvm_amd: Virtual VMLOAD VMSAVE supported vm-test-run-nixos-test-niks3> server # [ 9.714854] kvm_amd: Virtual GIF supported vm-test-run-nixos-test-niks3> server # [ 9.715822] kvm_amd: Virtual NMI enabled vm-test-run-nixos-test-niks3> builder # [ 9.753690] NET: Registered PF_PACKET protocol family vm-test-run-nixos-test-niks3> builder # [ 9.625832] dhcpcd[675]: eth0: offered 10.0.2.15 from 10.0.2.2 vm-test-run-nixos-test-niks3> builder # [ 9.628361] dhcpcd[675]: eth0: probing address 10.0.2.15/24 vm-test-run-nixos-test-niks3> server # [ 9.791056] EDAC MC: Ver: 3.0.0 vm-test-run-nixos-test-niks3> server # [ 9.737271] systemd-vconsole-setup[779]: Configuration of first virtual console was skipped, ignoring remaining ones. vm-test-run-nixos-test-niks3> server # [ 9.741495] systemd[1]: Finished Virtual Console Setup. vm-test-run-nixos-test-niks3> server # [ 10.353979] postgresql-pre-start[743]: selecting default time zone ... UTC vm-test-run-nixos-test-niks3> server # [ 10.356796] postgresql-pre-start[743]: creating configuration files ... ok vm-test-run-nixos-test-niks3> builder # [ 10.428926] dhcpcd[675]: eth0: soliciting an IPv6 router vm-test-run-nixos-test-niks3> builder # [ 10.431550] dhcpcd[675]: eth0: Router Advertisement from fe80::2 vm-test-run-nixos-test-niks3> builder # [ 10.434243] dhcpcd[675]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-nixos-test-niks3> builder # [ 10.436571] dhcpcd[675]: eth0: adding route to fec0::/64 vm-test-run-nixos-test-niks3> builder # [ 10.438428] dhcpcd[675]: eth0: adding default route via fe80::2 vm-test-run-nixos-test-niks3> server # [ 10.544463] postgresql-pre-start[743]: running bootstrap script ... ok vm-test-run-nixos-test-niks3> server # [ 10.894769] dhcpcd[701]: eth0: soliciting an IPv6 router vm-test-run-nixos-test-niks3> server # [ 10.895621] dhcpcd[701]: eth0: Router Advertisement from fe80::2 vm-test-run-nixos-test-niks3> server # [ 10.896517] dhcpcd[701]: eth0: adding address fec0::5054:ff:fe12:3456/64 vm-test-run-nixos-test-niks3> server # [ 10.898126] dhcpcd[701]: eth0: adding route to fec0::/64 vm-test-run-nixos-test-niks3> server # [ 10.898804] dhcpcd[701]: eth0: adding default route via fe80::2 vm-test-run-nixos-test-niks3> server # [ 10.934082] postgresql-pre-start[743]: performing post-bootstrap initialization ... ok vm-test-run-nixos-test-niks3> server # [ 11.076086] postgresql-pre-start[743]: syncing data to disk ... ok vm-test-run-nixos-test-niks3> server # [ 11.078136] postgresql-pre-start[743]: initdb: warning: enabling "trust" authentication for local connections vm-test-run-nixos-test-niks3> server # [ 11.079383] postgresql-pre-start[743]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. vm-test-run-nixos-test-niks3> server # [ 11.081243] postgresql-pre-start[743]: Success. You can now start the database server using: vm-test-run-nixos-test-niks3> server # [ 11.082328] postgresql-pre-start[743]: pg_ctl -D /var/lib/postgresql/18 -l logfile start vm-test-run-nixos-test-niks3> server # [ 11.157166] postgres[806]: [806] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit vm-test-run-nixos-test-niks3> server # [ 11.159643] postgres[806]: [806] LOG: listening on IPv6 address "::1", port 5432 vm-test-run-nixos-test-niks3> server # [ 11.160725] postgres[806]: [806] LOG: listening on IPv4 address "127.0.0.1", port 5432 vm-test-run-nixos-test-niks3> server # [ 11.163728] postgres[806]: [806] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" vm-test-run-nixos-test-niks3> server # [ 11.176488] postgres[815]: [815] LOG: database system was shut down at 2026-10-01 10:20:51 GMT vm-test-run-nixos-test-niks3> server # [ 11.181701] postgres[806]: [806] LOG: database system is ready to accept connections vm-test-run-nixos-test-niks3> server # [ 11.189512] systemd[1]: Started PostgreSQL Server. vm-test-run-nixos-test-niks3> server # [ 11.192207] systemd[1]: Starting PostgreSQL Setup Scripts... vm-test-run-nixos-test-niks3> server: (finished: waiting for unit postgresql.service, in 11.97 seconds) vm-test-run-nixos-test-niks3> server: waiting for unit rustfs.service vm-test-run-nixos-test-niks3> server: (finished: waiting for unit rustfs.service, in 0.03 seconds) vm-test-run-nixos-test-niks3> server: waiting for unit rustfs-setup.service vm-test-run-nixos-test-niks3> server # [ 11.369084] postgresql-setup-start[830]: CREATE DATABASE vm-test-run-nixos-test-niks3> server # [ 11.397420] postgresql-setup-start[843]: CREATE ROLE vm-test-run-nixos-test-niks3> server # [ 11.409429] postgresql-setup-start[845]: ALTER DATABASE vm-test-run-nixos-test-niks3> server # [ 11.414134] systemd[1]: Finished PostgreSQL Setup Scripts. vm-test-run-nixos-test-niks3> server # [ 11.415712] systemd[1]: Reached target PostgreSQL. vm-test-run-nixos-test-niks3> server # [ 13.770402] dhcpcd[701]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-nixos-test-niks3> server # [ 13.773393] dhcpcd[701]: eth0: adding route to 10.0.2.0/24 vm-test-run-nixos-test-niks3> server # [ 13.775869] dhcpcd[701]: eth0: adding default route via 10.0.2.2 vm-test-run-nixos-test-niks3> server # [ 13.846153] systemd[1]: Started DHCP Client. vm-test-run-nixos-test-niks3> builder # [ 14.747209] dhcpcd[675]: eth0: leased 10.0.2.15 for 86400 seconds vm-test-run-nixos-test-niks3> builder # [ 14.750337] dhcpcd[675]: eth0: adding route to 10.0.2.0/24 vm-test-run-nixos-test-niks3> builder # [ 14.752980] dhcpcd[675]: eth0: adding default route via 10.0.2.2 vm-test-run-nixos-test-niks3> builder # [ 14.832885] systemd[1]: Started DHCP Client. vm-test-run-nixos-test-niks3> builder # [ 14.834571] systemd[1]: Reached target Multi-User System. vm-test-run-nixos-test-niks3> builder # [ 14.835809] systemd[1]: Startup finished in 869ms (kernel) + 3.611s (initrd) + 10.354s (userspace) = 14.835s. vm-test-run-nixos-test-niks3> server # [ 24.030382] rustfs-setup-start[959]: mb s3://niks3-test vm-test-run-nixos-test-niks3> server # [ 24.042716] systemd[1]: Finished Setup RustFS bucket. vm-test-run-nixos-test-niks3> server # [ 24.052531] systemd[1]: Starting niks3 server... vm-test-run-nixos-test-niks3> server # [ 24.185756] postgres[974]: [974] ERROR: relation "goose_db_version" does not exist at character 36 vm-test-run-nixos-test-niks3> server # [ 24.188138] postgres[974]: [974] STATEMENT: SELECT version_id, is_applied from goose_db_version ORDER BY id DESC vm-test-run-nixos-test-niks3> server # [ 24.211483] niks3-server[968]: 2026/10/01 10:21:04 OK 20241026095416_initial_model.sql (14.16ms) vm-test-run-nixos-test-niks3> server # [ 24.218111] niks3-server[968]: 2026/10/01 10:21:04 OK 20251210153512_drop_unused_gin_index.sql (2.96ms) vm-test-run-nixos-test-niks3> server # [ 24.221796] niks3-server[968]: 2026/10/01 10:21:04 OK 20251218171726_add_pins.sql (5.95ms) vm-test-run-nixos-test-niks3> server # [ 24.225877] niks3-server[968]: 2026/10/01 10:21:04 OK 20260628120000_add_object_size_and_stats.sql (4.14ms) vm-test-run-nixos-test-niks3> server # [ 24.230783] niks3-server[968]: 2026/10/01 10:21:04 OK 20260905000000_add_claims.sql (3.52ms) vm-test-run-nixos-test-niks3> server # [ 24.235340] niks3-server[968]: 2026/10/01 10:21:04 OK 20260920000000_drop_claims.sql (4.51ms) vm-test-run-nixos-test-niks3> server # [ 24.238672] niks3-server[968]: 2026/10/01 10:21:04 OK 20260923120000_add_pushes.sql (3.22ms) vm-test-run-nixos-test-niks3> server # [ 24.239799] niks3-server[968]: 2026/10/01 10:21:04 goose: successfully migrated database to version: 20260923120000 vm-test-run-nixos-test-niks3> server # [ 24.244068] niks3-server[968]: 2026/10/01 10:21:04 OK 1_commit_pending_closure.sql (5.34ms) vm-test-run-nixos-test-niks3> server # [ 24.246850] niks3-server[968]: 2026/10/01 10:21:04 OK 2_object_stats_trigger.sql (2.78ms) vm-test-run-nixos-test-niks3> server # [ 24.249343] niks3-server[968]: 2026/10/01 10:21:04 OK 3_commit_push.sql (2.53ms) vm-test-run-nixos-test-niks3> server # [ 24.250560] niks3-server[968]: 2026/10/01 10:21:04 goose: up to current file version: 3 vm-test-run-nixos-test-niks3> server # [ 24.259583] niks3-server[968]: 2026/10/01 10:21:04 INFO OIDC provider initialized name=test issuer=http://127.0.0.1:8080/oidc vm-test-run-nixos-test-niks3> server # [ 24.261091] niks3-server[968]: 2026/10/01 10:21:04 INFO OIDC authentication enabled config=/nix/store/sa3h30ggc0ih3s7pyx6hv16myf7hx0lj-niks3-oidc.json vm-test-run-nixos-test-niks3> server # [ 24.263106] niks3-server[968]: 2026/10/01 10:21:04 INFO Loaded signing key name=niks3-test-1 path=/nix/store/bkg7syhrbck6xib4g0kaji8jiwjnl8sy-niks3-signing-key vm-test-run-nixos-test-niks3> server # [ 24.297473] niks3-server[968]: 2026/10/01 10:21:04 INFO Using socket-activated listener address=0.0.0.0:5751 vm-test-run-nixos-test-niks3> server # [ 24.298842] niks3-server[968]: 2026/10/01 10:21:04 INFO Using socket-activated listener address=/run/niks3/proxy.sock vm-test-run-nixos-test-niks3> server # [ 24.302269] systemd[1]: Started niks3 server. vm-test-run-nixos-test-niks3> server # [ 24.302925] niks3-server[968]: 2026/10/01 10:21:04 INFO systemd watchdog enabled interval=15s vm-test-run-nixos-test-niks3> server # [ 24.304532] systemd[1]: Reached target Multi-User System. vm-test-run-nixos-test-niks3> server # [ 24.305702] niks3-server[968]: 2026/10/01 10:21:04 INFO Starting HTTP server address=0.0.0.0:5751 vm-test-run-nixos-test-niks3> server # [ 24.306844] niks3-server[968]: 2026/10/01 10:21:04 INFO Starting HTTP server address=/run/niks3/proxy.sock vm-test-run-nixos-test-niks3> server # [ 24.308019] systemd[1]: Startup finished in 871ms (kernel) + 3.670s (initrd) + 19.758s (userspace) = 24.301s. vm-test-run-nixos-test-niks3> server: (finished: waiting for unit rustfs-setup.service, in 13.58 seconds) vm-test-run-nixos-test-niks3> server: waiting for unit mock-oidc.service vm-test-run-nixos-test-niks3> server: (finished: waiting for unit mock-oidc.service, in 0.03 seconds) vm-test-run-nixos-test-niks3> server: waiting for unit niks3.service vm-test-run-nixos-test-niks3> server: (finished: waiting for unit niks3.service, in 0.02 seconds) vm-test-run-nixos-test-niks3> server: waiting for TCP port 5751 on localhost vm-test-run-nixos-test-niks3> server # Connection to localhost (127.0.0.1) 5751 port [tcp/*] succeeded! vm-test-run-nixos-test-niks3> server: (finished: waiting for TCP port 5751 on localhost, in 0.03 seconds) vm-test-run-nixos-test-niks3> server: waiting for TCP port 8080 on localhost vm-test-run-nixos-test-niks3> server # Connection to localhost (127.0.0.1) 8080 port [tcp/http-alt] succeeded! vm-test-run-nixos-test-niks3> server: (finished: waiting for TCP port 8080 on localhost, in 0.02 seconds) vm-test-run-nixos-test-niks3> server: waiting for TCP port 9000 on localhost vm-test-run-nixos-test-niks3> server # Connection to localhost (127.0.0.1) 9000 port [tcp/cslistener] succeeded! vm-test-run-nixos-test-niks3> server: (finished: waiting for TCP port 9000 on localhost, in 0.02 seconds) vm-test-run-nixos-test-niks3> server: must succeed: mkdir -p /tmp/test-config vm-test-run-nixos-test-niks3> server: (finished: must succeed: mkdir -p /tmp/test-config, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: echo -n 'test-token-that-is-at-least-36-characters-long' > /tmp/test-config/auth-token vm-test-run-nixos-test-niks3> server: (finished: must succeed: echo -n 'test-token-that-is-at-least-36-characters-long' > /tmp/test-config/auth-token, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server # [ 25.134398] systemd[1]: Created slice Slice /system/nix-daemon. vm-test-run-nixos-test-niks3> server # [ 25.137716] systemd[1]: Started Nix Daemon instance (PID 1019/UID 0). vm-test-run-nixos-test-niks3> server # [ 25.181768] nix-daemon[1022]: remote pid 1019 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 25.199092] systemd[1]: nix-daemon@0-1-1019_1020-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 25.203983] niks3-server[968]: 2026/10/01 10:21:05 INFO Received push request method=POST path=/api/pushes vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:05.919Z level=INFO msg="Uploading 5 paths to server (0 already cached)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:05.920Z level=INFO msg="Uploading lm3pknxi0ipypy3lxh1wmm8wvvavdwrn-glibc-2.42-84 (33.4MB)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:05.921Z level=INFO msg="Uploading bv3lx708clpz3m6zbd5742np4dlry0yj-libunistring-1.4.2 (2.0MB)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:05.921Z level=INFO msg="Uploading m07syxhld8hpprrdmzq565ziia6vlw9l-xgcc-15.3.0-libgcc (193.0KB)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:05.921Z level=INFO msg="Uploading xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 (273.1KB)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:05.921Z level=INFO msg="Uploading i3jw341xs88r6wxf1j22rjx1mmd8cfjw-libidn2-2.3.8 (359.5KB)" vm-test-run-nixos-test-niks3> server # [ 25.421990] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=nar/1bvhsl1iqnbbgmxgp2hi0j8nj5ip5n6h6m2awanbnhwrl8fazjvh.nar.zst vm-test-run-nixos-test-niks3> server # [ 25.471610] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=m07syxhld8hpprrdmzq565ziia6vlw9l.ls vm-test-run-nixos-test-niks3> server # [ 25.500744] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi.ls vm-test-run-nixos-test-niks3> server # [ 25.527075] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=bv3lx708clpz3m6zbd5742np4dlry0yj.ls vm-test-run-nixos-test-niks3> server # [ 25.536282] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=i3jw341xs88r6wxf1j22rjx1mmd8cfjw.ls vm-test-run-nixos-test-niks3> server # [ 25.552688] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=nar/1ixxaz0n8nfxd2w29qq8frn6pjvdnjj3pl139gbi7jksrj9jd7jg.nar.zst vm-test-run-nixos-test-niks3> server # [ 25.598153] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=nar/1gz22gfl2lcahqzma75rvxgmk9zcfrvarzywlarwy4hkf1k4iz44.nar.zst vm-test-run-nixos-test-niks3> server # [ 25.621797] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=nar/0g2qsgc7dv9zl3i5nc523gicpy0xk2z4r1x4msr0inmsqjpm1ym9.nar.zst vm-test-run-nixos-test-niks3> server # [ 26.157485] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=lm3pknxi0ipypy3lxh1wmm8wvvavdwrn.ls vm-test-run-nixos-test-niks3> server # [ 26.236333] niks3-server[968]: 2026/10/01 10:21:06 INFO Received complete multipart upload request method=POST path=/api/multipart/complete vm-test-run-nixos-test-niks3> server # [ 26.255921] niks3-server[968]: 2026/10/01 10:21:06 INFO Completed multipart upload object_key=nar/06kkplxk31y11zksgcrdjv0hf6ymlmxvlc0i2h08g3zc22is465s.nar.zst upload_id=NzJkNjJjM2ItNDFmYi00NWVmLWI5MzctODZhMzU4Y2JlNmZkLmE5ZTE0NDdiLTgwNzAtNDMyNC1hNzM4LTZhYTFjNjk4ZTk0OHgxNzkwODUwMDY1OTA5Njc4MDQz parts=1 vm-test-run-nixos-test-niks3> server # [ 26.259413] niks3-server[968]: 2026/10/01 10:21:06 INFO Received sign narinfos request method=POST path=/api/pushes/1/sign vm-test-run-nixos-test-niks3> server # [ 26.264131] niks3-server[968]: 2026/10/01 10:21:06 INFO Signed narinfos id=1 count=5 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:06.957Z level=INFO msg="Uploading 5 narinfos" vm-test-run-nixos-test-niks3> server # [ 26.284145] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=lm3pknxi0ipypy3lxh1wmm8wvvavdwrn.narinfo vm-test-run-nixos-test-niks3> server # [ 26.293423] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=bv3lx708clpz3m6zbd5742np4dlry0yj.narinfo vm-test-run-nixos-test-niks3> server # [ 26.296055] niks3-server[968]: 2026/10/01 10:21:06 INFO Registered completed upload object_key=i3jw341xs88r6wxf1j22rjx1mmd8cfjw.narinfo vm-test-run-nixos-test-niks3> server # [ 26.299289] niks3-server[968]: 2026/10/01 10:21:06 INFO Received complete push request method=POST path=/api/pushes/1/complete vm-test-run-nixos-test-niks3> server # [ 26.308860] niks3-server[968]: 2026/10/01 10:21:07 INFO Registered completed upload object_key=m07syxhld8hpprrdmzq565ziia6vlw9l.narinfo vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.006Z level=INFO msg="Upload complete. (1.224s)" vm-test-run-nixos-test-niks3> server # [ 26.321438] niks3-server[968]: 2026/10/01 10:21:07 INFO Registered completed upload object_key=xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi.narinfo vm-test-run-nixos-test-niks3> server: (finished: must succeed: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3, in 1.32 seconds) vm-test-run-nixos-test-niks3> server: must succeed: echo -n 'invalid-token' > /tmp/test-config/invalid-token vm-test-run-nixos-test-niks3> server: (finished: must succeed: echo -n 'invalid-token' > /tmp/test-config/invalid-token, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must fail: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/invalid-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server # [ 26.385847] niks3-server[968]: 2026/10/01 10:21:07 WARN Authentication failed token_preview=invalid-token token_length=13 oidc_error="no provider could verify the token (signature or issuer mismatch)" oidc_provider="" tried_providers=[test] vm-test-run-nixos-test-niks3> server # [ 26.421875] systemd[1]: Started Nix Daemon instance (PID 1055/UID 0). vm-test-run-nixos-test-niks3> server # [ 26.460829] nix-daemon[1057]: remote pid 1055 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 26.473207] systemd[1]: nix-daemon@1-2-1055_1056-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 26.475811] niks3-server[968]: 2026/10/01 10:21:07 WARN Authentication failed token_preview=invalid-token token_length=13 oidc_error="no provider could verify the token (signature or issuer mismatch)" oidc_provider="" tried_providers=[test] vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.172Z level=ERROR msg="Fatal error" error="pushing paths: creating pending closures: creating push: server returned 401: Unauthorized\n" vm-test-run-nixos-test-niks3> server: (finished: must fail: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/invalid-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3, in 0.15 seconds) vm-test-run-nixos-test-niks3> server: waiting for unit nginx.service vm-test-run-nixos-test-niks3> server: (finished: waiting for unit nginx.service, in 0.02 seconds) vm-test-run-nixos-test-niks3> server: waiting for TCP port 443 on localhost vm-test-run-nixos-test-niks3> server # Connection to localhost (::1) 443 port [tcp/https] succeeded! vm-test-run-nixos-test-niks3> server: (finished: waiting for TCP port 443 on localhost, in 0.02 seconds) vm-test-run-nixos-test-niks3> server: must succeed: /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem --client-cert /etc/niks3-test-certs/client.pem --client-key /etc/niks3-test-certs/client.key /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.260Z level=INFO msg="Configuring client TLS" cert=/etc/niks3-test-certs/client.pem key=/etc/niks3-test-certs/client.key ca=/etc/niks3-test-certs/ca.pem vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.278Z level=INFO msg="All 1 paths already cached" vm-test-run-nixos-test-niks3> server: (finished: must succeed: /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem --client-cert /etc/niks3-test-certs/client.pem --client-key /etc/niks3-test-certs/client.key /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3, in 0.07 seconds) vm-test-run-nixos-test-niks3> server: must fail: curl -sf -X POST -H 'X-SSL-Client-Verify: SUCCESS' -H 'X-SSL-Client-Dn: CN=niks3 test client' -d '{}' http://127.0.0.1:5751/api/pending_closures vm-test-run-nixos-test-niks3> server: (finished: must fail: curl -sf -X POST -H 'X-SSL-Client-Verify: SUCCESS' -H 'X-SSL-Client-Dn: CN=niks3 test client' -d '{}' http://127.0.0.1:5751/api/pending_closures, in 0.03 seconds) vm-test-run-nixos-test-niks3> server: must fail: /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.319Z level=ERROR msg="Fatal error" error="auth token is required (use --auth-token-path, --auth-token-script, NIKS3_AUTH_TOKEN_FILE, or $XDG_CONFIG_HOME/niks3/auth-token)" vm-test-run-nixos-test-niks3> server: (finished: must fail: /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.365Z level=INFO msg="Configuring client TLS" cert="" key="" ca=/etc/niks3-test-certs/ca.pem vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.373Z level=INFO msg="All 1 paths already cached" vm-test-run-nixos-test-niks3> server: (finished: must succeed: NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3, in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must succeed: cd /etc/niks3-test-certs && /nix/store/44gxi8li8y8wrxrb93sya9hljkpigsqw-openssl-3.6.4-bin/bin/openssl req -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 -nodes -keyout other.key -out other.csr -subj '/CN=other client' vm-test-run-nixos-test-niks3> server # ----- vm-test-run-nixos-test-niks3> server: (finished: must succeed: cd /etc/niks3-test-certs && /nix/store/44gxi8li8y8wrxrb93sya9hljkpigsqw-openssl-3.6.4-bin/bin/openssl req -newkey ec -pkeyopt ec_paramgen_curve:prime256v1 -nodes -keyout other.key -out other.csr -subj '/CN=other client', in 0.02 seconds) vm-test-run-nixos-test-niks3> server: must succeed: cd /etc/niks3-test-certs && /nix/store/44gxi8li8y8wrxrb93sya9hljkpigsqw-openssl-3.6.4-bin/bin/openssl x509 -req -in other.csr -CA ca.pem -CAkey ca.key -CAcreateserial -days 1 -out other.pem vm-test-run-nixos-test-niks3> server # Certificate request self-signature ok vm-test-run-nixos-test-niks3> server # subject=CN=other client vm-test-run-nixos-test-niks3> server: (finished: must succeed: cd /etc/niks3-test-certs && /nix/store/44gxi8li8y8wrxrb93sya9hljkpigsqw-openssl-3.6.4-bin/bin/openssl x509 -req -in other.csr -CA ca.pem -CAkey ca.key -CAcreateserial -days 1 -out other.pem, in 0.03 seconds) vm-test-run-nixos-test-niks3> server: must fail: /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem --client-cert /etc/niks3-test-certs/other.pem --client-key /etc/niks3-test-certs/other.key /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.463Z level=INFO msg="Configuring client TLS" cert=/etc/niks3-test-certs/other.pem key=/etc/niks3-test-certs/other.key ca=/etc/niks3-test-certs/ca.pem vm-test-run-nixos-test-niks3> server # [ 26.779504] niks3-server[968]: 2026/10/01 10:21:07 WARN mTLS auth: subject not in bound subjects subject="CN=other client" vm-test-run-nixos-test-niks3> server # [ 26.814293] systemd[1]: Started Nix Daemon instance (PID 1125/UID 0). vm-test-run-nixos-test-niks3> server # [ 26.853407] nix-daemon[1127]: remote pid 1125 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 26.865044] systemd[1]: nix-daemon@2-3-1125_1126-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 26.871135] niks3-server[968]: 2026/10/01 10:21:07 WARN mTLS auth: subject not in bound subjects subject="CN=other client" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:07.565Z level=ERROR msg="Fatal error" error="pushing paths: creating pending closures: creating push: server returned 401: Unauthorized\n" vm-test-run-nixos-test-niks3> server: (finished: must fail: /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --server-url https://server --ca-cert /etc/niks3-test-certs/ca.pem --client-cert /etc/niks3-test-certs/other.pem --client-key /etc/niks3-test-certs/other.key /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3, in 0.15 seconds) vm-test-run-nixos-test-niks3> server: must succeed: mkdir -p /tmp/test-store vm-test-run-nixos-test-niks3> server: (finished: must succeed: mkdir -p /tmp/test-store, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/test-store /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/test-store /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> , in 0.53 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/test-drv.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "test-build-log"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'test build log output'; echo 'hello world' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/test-drv.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "test-build-log"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'test build log output'; echo 'hello world' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> , in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: nix-build --log-format bar-with-logs /tmp/test-drv.nix vm-test-run-nixos-test-niks3> server # warning: Nix search path entry '/nix/var/nix/profiles/per-user/root/channels' does not exist, ignoring vm-test-run-nixos-test-niks3> server # [ 27.475269] systemd[1]: Started Nix Daemon instance (PID 1169/UID 0). vm-test-run-nixos-test-niks3> server # [ 27.513896] nix-daemon[1173]: remote pid 1169 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # this derivation will be built: vm-test-run-nixos-test-niks3> server # /nix/store/dmxprr36mb5n38x36zfbbcsax7r84h48-test-build-log.drv vm-test-run-nixos-test-niks3> server # building '/nix/store/dmxprr36mb5n38x36zfbbcsax7r84h48-test-build-log.drv'... vm-test-run-nixos-test-niks3> server # test-build-log> test build log output vm-test-run-nixos-test-niks3> server: (finished: must succeed: nix-build --log-format bar-with-logs /tmp/test-drv.nix, in 0.18 seconds) vm-test-run-nixos-test-niks3> server: must succeed: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> server # [ 27.616885] systemd[1]: nix-daemon@3-4-1169_1170-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 27.700148] systemd[1]: Started Nix Daemon instance (PID 1199/UID 0). vm-test-run-nixos-test-niks3> server # [ 27.744272] nix-daemon[1201]: remote pid 1199 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 27.761594] systemd[1]: nix-daemon@4-5-1199_1200-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 27.767777] niks3-server[968]: 2026/10/01 10:21:08 INFO Received push request method=POST path=/api/pushes vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:08.470Z level=INFO msg="Uploading 1 paths to server (0 already cached)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:08.472Z level=INFO msg="Uploading dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log (128B)" vm-test-run-nixos-test-niks3> server # [ 27.817532] niks3-server[968]: 2026/10/01 10:21:08 INFO Registered completed upload object_key=dv59n3bx90hi3c1q8jg1dshwsg6jf2sv.ls vm-test-run-nixos-test-niks3> server # [ 27.820611] niks3-server[968]: 2026/10/01 10:21:08 INFO Registered completed upload object_key=log/dmxprr36mb5n38x36zfbbcsax7r84h48-test-build-log.drv vm-test-run-nixos-test-niks3> server # [ 27.823714] niks3-server[968]: 2026/10/01 10:21:08 INFO Received sign narinfos request method=POST path=/api/pushes/2/sign vm-test-run-nixos-test-niks3> server # [ 27.827306] niks3-server[968]: 2026/10/01 10:21:08 INFO Signed narinfos id=2 count=1 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:08.519Z level=INFO msg="Uploading 1 narinfos" vm-test-run-nixos-test-niks3> server # [ 27.832673] niks3-server[968]: 2026/10/01 10:21:08 INFO Registered completed upload object_key=nar/00zns3gj9hwz2a4b0i07y7nmxybq59lh24bl3xsxblcl6333mjil.nar.zst vm-test-run-nixos-test-niks3> server # [ 27.838602] niks3-server[968]: 2026/10/01 10:21:08 INFO Received complete push request method=POST path=/api/pushes/2/complete vm-test-run-nixos-test-niks3> server # [ 27.846833] niks3-server[968]: 2026/10/01 10:21:08 INFO Registered completed upload object_key=dv59n3bx90hi3c1q8jg1dshwsg6jf2sv.narinfo vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:08.541Z level=INFO msg="Upload complete. (187ms)" vm-test-run-nixos-test-niks3> server: (finished: must succeed: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log, in 0.25 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix log --store 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix log --store 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> , in 0.11 seconds) vm-test-run-nixos-test-niks3> subtest: push --stdin streams paths and reports each one vm-test-run-nixos-test-niks3> server: must succeed: nix-build --no-out-link -E 'derivation { name = "stdin-test"; system = builtins.currentSystem; builder = "/bin/sh"; args = [ "-c" "echo stdin > $out" ]; }' vm-test-run-nixos-test-niks3> server # warning: Nix search path entry '/nix/var/nix/profiles/per-user/root/channels' does not exist, ignoring vm-test-run-nixos-test-niks3> server # [ 28.010890] systemd[1]: Started Nix Daemon instance (PID 1220/UID 0). vm-test-run-nixos-test-niks3> server # [ 28.048888] nix-daemon[1224]: remote pid 1220 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # this derivation will be built: vm-test-run-nixos-test-niks3> server # /nix/store/qky132yim5rs9zg5kyvqahjdlj4k28r1-stdin-test.drv vm-test-run-nixos-test-niks3> server # building '/nix/store/qky132yim5rs9zg5kyvqahjdlj4k28r1-stdin-test.drv'... vm-test-run-nixos-test-niks3> server: (finished: must succeed: nix-build --no-out-link -E 'derivation { name = "stdin-test"; system = builtins.currentSystem; builder = "/bin/sh"; args = [ "-c" "echo stdin > $out" ]; }', in 0.16 seconds) vm-test-run-nixos-test-niks3> server: must succeed: printf '%s\n\n%s\n' /nix/store/3lzkfq9fx7rridh3i11ly8xyqdbqb44w-stdin-test /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log | NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --stdin vm-test-run-nixos-test-niks3> server # [ 28.140238] systemd[1]: nix-daemon@5-6-1220_1221-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 28.238606] systemd[1]: Started Nix Daemon instance (PID 1253/UID 0). vm-test-run-nixos-test-niks3> server # [ 28.277974] nix-daemon[1255]: remote pid 1253 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 28.288670] systemd[1]: nix-daemon@6-7-1253_1254-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 28.291929] niks3-server[968]: 2026/10/01 10:21:08 INFO Received push request method=POST path=/api/pushes vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.003Z level=INFO msg="Uploading 1 paths to server (0 already cached)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.004Z level=INFO msg="Uploading 3lzkfq9fx7rridh3i11ly8xyqdbqb44w-stdin-test (120B)" vm-test-run-nixos-test-niks3> server # [ 28.336881] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=log/qky132yim5rs9zg5kyvqahjdlj4k28r1-stdin-test.drv vm-test-run-nixos-test-niks3> server # [ 28.338978] niks3-server[968]: 2026/10/01 10:21:09 INFO Received sign narinfos request method=POST path=/api/pushes/3/sign vm-test-run-nixos-test-niks3> server # [ 28.341233] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=3lzkfq9fx7rridh3i11ly8xyqdbqb44w.ls vm-test-run-nixos-test-niks3> server # [ 28.343118] niks3-server[968]: 2026/10/01 10:21:09 INFO Signed narinfos id=3 count=1 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.037Z level=INFO msg="Uploading 1 narinfos" vm-test-run-nixos-test-niks3> server # [ 28.350475] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=nar/1hj1r0g515rfxjx685mfn3dgr6akqbn4gf64snlv6bxaxph69lna.nar.zst vm-test-run-nixos-test-niks3> server # [ 28.356619] niks3-server[968]: 2026/10/01 10:21:09 INFO Received complete push request method=POST path=/api/pushes/3/complete vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.055Z level=INFO msg="Upload complete. (180ms)" vm-test-run-nixos-test-niks3> server # [ 28.364917] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=3lzkfq9fx7rridh3i11ly8xyqdbqb44w.narinfo vm-test-run-nixos-test-niks3> server: (finished: must succeed: printf '%s\n\n%s\n' /nix/store/3lzkfq9fx7rridh3i11ly8xyqdbqb44w-stdin-test /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log | NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --stdin, in 0.24 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/stdin-store /nix/store/3lzkfq9fx7rridh3i11ly8xyqdbqb44w-stdin-test vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/stdin-store /nix/store/3lzkfq9fx7rridh3i11ly8xyqdbqb44w-stdin-test vm-test-run-nixos-test-niks3> , in 0.14 seconds) vm-test-run-nixos-test-niks3> (finished: subtest: push --stdin streams paths and reports each one, in 0.55 seconds) vm-test-run-nixos-test-niks3> server: must succeed: readlink /etc/niks3-test/symlink-wrapper vm-test-run-nixos-test-niks3> server: (finished: must succeed: readlink /etc/niks3-test/symlink-wrapper, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: readlink /etc/static/niks3-test/symlink-wrapper vm-test-run-nixos-test-niks3> server: (finished: must succeed: readlink /etc/static/niks3-test/symlink-wrapper, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: test -L /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper vm-test-run-nixos-test-niks3> server: (finished: must succeed: test -L /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: readlink /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper vm-test-run-nixos-test-niks3> server: (finished: must succeed: readlink /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper, in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper vm-test-run-nixos-test-niks3> server # [ 28.637540] systemd[1]: Started Nix Daemon instance (PID 1300/UID 0). vm-test-run-nixos-test-niks3> server # [ 28.676353] nix-daemon[1302]: remote pid 1300 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 28.686582] systemd[1]: nix-daemon@7-8-1300_1301-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 28.691881] niks3-server[968]: 2026/10/01 10:21:09 INFO Received push request method=POST path=/api/pushes vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.388Z level=INFO msg="Uploading 2 paths to server (0 already cached)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.390Z level=INFO msg="Uploading 1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper (192B)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.391Z level=INFO msg="Uploading x9d9hyw8xybijhpvipmkiryn9n8nw3ij-base-package (536B)" vm-test-run-nixos-test-niks3> server # [ 28.731774] niks3-server[968]: 2026/10/01 10:21:09 INFO Received sign narinfos request method=POST path=/api/pushes/4/sign vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.426Z level=INFO msg="Uploading 2 narinfos" vm-test-run-nixos-test-niks3> server # [ 28.735655] niks3-server[968]: 2026/10/01 10:21:09 INFO Signed narinfos id=4 count=2 vm-test-run-nixos-test-niks3> server # [ 28.738189] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=nar/0820av37plmfgrxw6pcbym6phk1sv14dilyrablrnkzb7z1fd5js.nar.zst vm-test-run-nixos-test-niks3> server # [ 28.741865] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=x9d9hyw8xybijhpvipmkiryn9n8nw3ij.ls vm-test-run-nixos-test-niks3> server # [ 28.744142] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=1czajpbpppk7h9y4k4w3hxz0xs25srq3.ls vm-test-run-nixos-test-niks3> server # [ 28.760127] niks3-server[968]: 2026/10/01 10:21:09 INFO Received complete push request method=POST path=/api/pushes/4/complete vm-test-run-nixos-test-niks3> server # [ 28.764442] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=1czajpbpppk7h9y4k4w3hxz0xs25srq3.narinfo vm-test-run-nixos-test-niks3> server # [ 28.768516] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=x9d9hyw8xybijhpvipmkiryn9n8nw3ij.narinfo vm-test-run-nixos-test-niks3> server # [ 28.772578] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=nar/0v342j6sk8pcizzisl5bwzw5xdrdjdmynpgxd3f6827yp5bzbrl7.nar.zst vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.468Z level=INFO msg="Upload complete. (174ms)" vm-test-run-nixos-test-niks3> server: (finished: must succeed: NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper, in 0.22 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/test-store /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/test-store /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper vm-test-run-nixos-test-niks3> , in 0.13 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/oidc-test.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "oidc-test"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'OIDC test derivation' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/oidc-test.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "oidc-test"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'OIDC test derivation' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> , in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: nix-build --log-format bar-with-logs /tmp/oidc-test.nix --no-out-link vm-test-run-nixos-test-niks3> server # warning: Nix search path entry '/nix/var/nix/profiles/per-user/root/channels' does not exist, ignoring vm-test-run-nixos-test-niks3> server # [ 28.967543] systemd[1]: Started Nix Daemon instance (PID 1330/UID 0). vm-test-run-nixos-test-niks3> server # [ 29.006502] nix-daemon[1334]: remote pid 1330 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # this derivation will be built: vm-test-run-nixos-test-niks3> server # /nix/store/87yp7lxi58c0mlg2mkpyfybkk9ikzy6n-oidc-test.drv vm-test-run-nixos-test-niks3> server # building '/nix/store/87yp7lxi58c0mlg2mkpyfybkk9ikzy6n-oidc-test.drv'... vm-test-run-nixos-test-niks3> server: (finished: must succeed: nix-build --log-format bar-with-logs /tmp/oidc-test.nix --no-out-link, in 0.17 seconds) vm-test-run-nixos-test-niks3> server: must succeed: curl -s 'http://127.0.0.1:8081/issue?sub=repo:myorg/myrepo:ref:refs/heads/main&aud=http://server:5751&repository_owner=myorg' vm-test-run-nixos-test-niks3> server # [ 29.095210] systemd[1]: nix-daemon@8-9-1330_1331-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server: (finished: must succeed: curl -s 'http://127.0.0.1:8081/issue?sub=repo:myorg/myrepo:ref:refs/heads/main&aud=http://server:5751&repository_owner=myorg', in 0.03 seconds) vm-test-run-nixos-test-niks3> server: must succeed: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'eyJhbGciOiJSUzI1NiIsImtpZCI6IktYX3hBVXhXcGNEdDZIaDBYUVpNNlB0aE53RXpjTkx3Z3gzMU5vc3J6NDQiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJodHRwOi8vc2VydmVyOjU3NTEiLCJleHAiOjE3OTA4NTM2NjksImlhdCI6MTc5MDg1MDA2OSwiaXNzIjoiaHR0cDovLzEyNy4wLjAuMTo4MDgwL29pZGMiLCJyZXBvc2l0b3J5X293bmVyIjoibXlvcmciLCJzdWIiOiJyZXBvOm15b3JnL215cmVwbzpyZWY6cmVmcy9oZWFkcy9tYWluIn0.oYO3gDTzf7tV_FqGL1bSIe7e9m7pUFiCPOb8fCTf-LuxKpIamOzOLGS-pleLJF1Upy1qPZeHx6q96FugaDT2EXfzyWMOsTz0cwO2_30lOJekNZdxh3E7pCzVrnkuFN7YaYMl5jiws1JK8CR1gfNX88XAkfyEH6IZQZqwKW-geFZYElZTWzn4pnsyeF12I0zp3Ww2G7Xc98IC1jivVMbz2DtBAJh9ge11pWsqVwBtPp3_cRWy-bL8_bd0hxR864kYcvvwH2eM8mIhA1xuWEH_eyHLd8G4WlYFLPhf7PBBRJv7zmb-OJjd3-fEeiFxVZiONd8jtC0Ub07y7KSK3Cb1lQ' /nix/store/hp57zlhhih1lr1f0hfrf8sca8fvgxc2i-oidc-test vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.821Z level=WARN msg="--auth-token is deprecated: tokens on the command line are visible in /proc and shell history; use --auth-token-path or --auth-token-script" vm-test-run-nixos-test-niks3> server # [ 29.198367] systemd[1]: Started Nix Daemon instance (PID 1363/UID 0). vm-test-run-nixos-test-niks3> server # [ 29.236762] nix-daemon[1365]: remote pid 1363 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 29.247671] systemd[1]: nix-daemon@9-10-1363_1364-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 29.252452] niks3-server[968]: 2026/10/01 10:21:09 INFO Received push request method=POST path=/api/pushes vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.948Z level=INFO msg="Uploading 1 paths to server (0 already cached)" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.949Z level=INFO msg="Uploading hp57zlhhih1lr1f0hfrf8sca8fvgxc2i-oidc-test (136B)" vm-test-run-nixos-test-niks3> server # [ 29.279572] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=hp57zlhhih1lr1f0hfrf8sca8fvgxc2i.ls vm-test-run-nixos-test-niks3> server # [ 29.282771] niks3-server[968]: 2026/10/01 10:21:09 INFO Received sign narinfos request method=POST path=/api/pushes/5/sign vm-test-run-nixos-test-niks3> server # [ 29.284544] niks3-server[968]: 2026/10/01 10:21:09 INFO Signed narinfos id=5 count=1 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.977Z level=INFO msg="Uploading 1 narinfos" vm-test-run-nixos-test-niks3> server # [ 29.294409] niks3-server[968]: 2026/10/01 10:21:09 INFO Received complete push request method=POST path=/api/pushes/5/complete vm-test-run-nixos-test-niks3> server # [ 29.296252] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=log/87yp7lxi58c0mlg2mkpyfybkk9ikzy6n-oidc-test.drv vm-test-run-nixos-test-niks3> server # [ 29.301333] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=nar/17h0qgwf5334wia961ibqy9hmpsyvfhrvj5ji9m031klp6sx4v0q.nar.zst vm-test-run-nixos-test-niks3> server # [ 29.304556] niks3-server[968]: 2026/10/01 10:21:09 INFO Registered completed upload object_key=hp57zlhhih1lr1f0hfrf8sca8fvgxc2i.narinfo vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:09.998Z level=INFO msg="Upload complete. (144ms)" vm-test-run-nixos-test-niks3> server: (finished: must succeed: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'eyJhbGciOiJSUzI1NiIsImtpZCI6IktYX3hBVXhXcGNEdDZIaDBYUVpNNlB0aE53RXpjTkx3Z3gzMU5vc3J6NDQiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJodHRwOi8vc2VydmVyOjU3NTEiLCJleHAiOjE3OTA4NTM2NjksImlhdCI6MTc5MDg1MDA2OSwiaXNzIjoiaHR0cDovLzEyNy4wLjAuMTo4MDgwL29pZGMiLCJyZXBvc2l0b3J5X293bmVyIjoibXlvcmciLCJzdWIiOiJyZXBvOm15b3JnL215cmVwbzpyZWY6cmVmcy9oZWFkcy9tYWluIn0.oYO3gDTzf7tV_FqGL1bSIe7e9m7pUFiCPOb8fCTf-LuxKpIamOzOLGS-pleLJF1Upy1qPZeHx6q96FugaDT2EXfzyWMOsTz0cwO2_30lOJekNZdxh3E7pCzVrnkuFN7YaYMl5jiws1JK8CR1gfNX88XAkfyEH6IZQZqwKW-geFZYElZTWzn4pnsyeF12I0zp3Ww2G7Xc98IC1jivVMbz2DtBAJh9ge11pWsqVwBtPp3_cRWy-bL8_bd0hxR864kYcvvwH2eM8mIhA1xuWEH_eyHLd8G4WlYFLPhf7PBBRJv7zmb-OJjd3-fEeiFxVZiONd8jtC0Ub07y7KSK3Cb1lQ' /nix/store/hp57zlhhih1lr1f0hfrf8sca8fvgxc2i-oidc-test, in 0.19 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/oidc-test2.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "oidc-test2"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'OIDC test 2' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/oidc-test2.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "oidc-test2"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'OIDC test 2' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> , in 0.01 seconds) vm-test-run-nixos-test-niks3> server: must succeed: nix-build --log-format bar-with-logs /tmp/oidc-test2.nix --no-out-link vm-test-run-nixos-test-niks3> server # warning: Nix search path entry '/nix/var/nix/profiles/per-user/root/channels' does not exist, ignoring vm-test-run-nixos-test-niks3> server # [ 29.367623] systemd[1]: Started Nix Daemon instance (PID 1375/UID 0). vm-test-run-nixos-test-niks3> server # [ 29.406441] nix-daemon[1379]: remote pid 1375 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # this derivation will be built: vm-test-run-nixos-test-niks3> server # /nix/store/1sl2zp65pyaksf29w1lxwgl7mc3mrw4x-oidc-test2.drv vm-test-run-nixos-test-niks3> server # building '/nix/store/1sl2zp65pyaksf29w1lxwgl7mc3mrw4x-oidc-test2.drv'... vm-test-run-nixos-test-niks3> server: (finished: must succeed: nix-build --log-format bar-with-logs /tmp/oidc-test2.nix --no-out-link, in 0.16 seconds) vm-test-run-nixos-test-niks3> server: must succeed: curl -s 'http://127.0.0.1:8081/issue?sub=repo:otherorg/repo:ref:refs/heads/main&aud=http://server:5751&repository_owner=otherorg' vm-test-run-nixos-test-niks3> server # [ 29.495821] systemd[1]: nix-daemon@10-11-1375_1376-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server: (finished: must succeed: curl -s 'http://127.0.0.1:8081/issue?sub=repo:otherorg/repo:ref:refs/heads/main&aud=http://server:5751&repository_owner=otherorg', in 0.03 seconds) vm-test-run-nixos-test-niks3> server: must fail: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'eyJhbGciOiJSUzI1NiIsImtpZCI6IktYX3hBVXhXcGNEdDZIaDBYUVpNNlB0aE53RXpjTkx3Z3gzMU5vc3J6NDQiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJodHRwOi8vc2VydmVyOjU3NTEiLCJleHAiOjE3OTA4NTM2NzAsImlhdCI6MTc5MDg1MDA3MCwiaXNzIjoiaHR0cDovLzEyNy4wLjAuMTo4MDgwL29pZGMiLCJyZXBvc2l0b3J5X293bmVyIjoib3RoZXJvcmciLCJzdWIiOiJyZXBvOm90aGVyb3JnL3JlcG86cmVmOnJlZnMvaGVhZHMvbWFpbiJ9.QVYJYewNTzlpMGvBY337M40lrPDdUZ5_feK8kmmwMKmHiR452OFRXI_1kzBeESCqmfU110JhSVL2Iqb2alJnR7X-bWstBEOeLCwGTkJFyjBAJORtVL5JTXCbWWopzZnAREQiP3q2-roqOFA-QFztHc2mGj7aDsGyLyiMZCpeSnKdDTs4Uh8D-pYpe5qxQ36Rhgy7Tr23R_K4R8Uxi8eGFfEzqfEyCwgsyqPBBLWIbixfKNGf5FolsZKjg4Zhk1NxrA3cOQx16Gq6606fw_WEEto6LBy_OjkJBGbs36x9sLxbB7zGDzjiuT-sIramp-rKRKXzWEh33tBTIPahPAOy4g' /nix/store/7a745016z2pfi6bnynd5cagkrhpjgz09-oidc-test2 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.221Z level=WARN msg="--auth-token is deprecated: tokens on the command line are visible in /proc and shell history; use --auth-token-path or --auth-token-script" vm-test-run-nixos-test-niks3> server # [ 29.565712] niks3-server[968]: 2026/10/01 10:21:10 WARN Authentication failed token_preview=eyJhbGciOi...IPahPAOy4g token_length=682 oidc_error="no rule matched: claim \"repository_owner\" value [otherorg] not in allowed patterns [myorg]" oidc_provider=test tried_providers=[test] vm-test-run-nixos-test-niks3> server # [ 29.599948] systemd[1]: Started Nix Daemon instance (PID 1409/UID 0). vm-test-run-nixos-test-niks3> server # [ 29.638419] nix-daemon[1411]: remote pid 1409 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 29.649899] systemd[1]: nix-daemon@11-12-1409_1410-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.347Z level=ERROR msg="Fatal error" error="pushing paths: creating pending closures: creating push: server returned 401: Unauthorized\n" vm-test-run-nixos-test-niks3> server # [ 29.656992] niks3-server[968]: 2026/10/01 10:21:10 WARN Authentication failed token_preview=eyJhbGciOi...IPahPAOy4g token_length=682 oidc_error="no rule matched: claim \"repository_owner\" value [otherorg] not in allowed patterns [myorg]" oidc_provider=test tried_providers=[test] vm-test-run-nixos-test-niks3> server: (finished: must fail: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'eyJhbGciOiJSUzI1NiIsImtpZCI6IktYX3hBVXhXcGNEdDZIaDBYUVpNNlB0aE53RXpjTkx3Z3gzMU5vc3J6NDQiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJodHRwOi8vc2VydmVyOjU3NTEiLCJleHAiOjE3OTA4NTM2NzAsImlhdCI6MTc5MDg1MDA3MCwiaXNzIjoiaHR0cDovLzEyNy4wLjAuMTo4MDgwL29pZGMiLCJyZXBvc2l0b3J5X293bmVyIjoib3RoZXJvcmciLCJzdWIiOiJyZXBvOm90aGVyb3JnL3JlcG86cmVmOnJlZnMvaGVhZHMvbWFpbiJ9.QVYJYewNTzlpMGvBY337M40lrPDdUZ5_feK8kmmwMKmHiR452OFRXI_1kzBeESCqmfU110JhSVL2Iqb2alJnR7X-bWstBEOeLCwGTkJFyjBAJORtVL5JTXCbWWopzZnAREQiP3q2-roqOFA-QFztHc2mGj7aDsGyLyiMZCpeSnKdDTs4Uh8D-pYpe5qxQ36Rhgy7Tr23R_K4R8Uxi8eGFfEzqfEyCwgsyqPBBLWIbixfKNGf5FolsZKjg4Zhk1NxrA3cOQx16Gq6606fw_WEEto6LBy_OjkJBGbs36x9sLxbB7zGDzjiuT-sIramp-rKRKXzWEh33tBTIPahPAOy4g' /nix/store/7a745016z2pfi6bnynd5cagkrhpjgz09-oidc-test2, in 0.14 seconds) vm-test-run-nixos-test-niks3> server: must succeed: curl -s 'http://127.0.0.1:8081/issue?sub=repo:myorg/myrepo:ref:refs/heads/main&aud=http://wrong:5751&repository_owner=myorg' vm-test-run-nixos-test-niks3> server: (finished: must succeed: curl -s 'http://127.0.0.1:8081/issue?sub=repo:myorg/myrepo:ref:refs/heads/main&aud=http://wrong:5751&repository_owner=myorg', in 0.02 seconds) vm-test-run-nixos-test-niks3> server: must fail: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'eyJhbGciOiJSUzI1NiIsImtpZCI6IktYX3hBVXhXcGNEdDZIaDBYUVpNNlB0aE53RXpjTkx3Z3gzMU5vc3J6NDQiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJodHRwOi8vd3Jvbmc6NTc1MSIsImV4cCI6MTc5MDg1MzY3MCwiaWF0IjoxNzkwODUwMDcwLCJpc3MiOiJodHRwOi8vMTI3LjAuMC4xOjgwODAvb2lkYyIsInJlcG9zaXRvcnlfb3duZXIiOiJteW9yZyIsInN1YiI6InJlcG86bXlvcmcvbXlyZXBvOnJlZjpyZWZzL2hlYWRzL21haW4ifQ.Xyijan-Kg2xMkYGoRgrcf7ZBgQyzccG5vQJhcke9Ui961Hz0NVVWQFqNGNpuLSGzXPuVeSez5l4LCRs4JCZVxYD-nnzWh2X6EXsE8p7kzrZWp0CQTDP4VhY9wDxA2ZHkZXiXfZ2DmDAeeOZOTBt9FtI4fVyUuXGW3QQrX6_QFC1H75Ffq5318DGxJJOtQGwbN6DHJC9KY595-dVNrnnqtu-hn2xkSxOO_HnfIYO4dB75ZnOtxWS2UDQc2VQQZKe1IFP8hoEznnnipkDRTTjrNNZOniszfNhdsxNbvGgBfffRkuaripWtZd-l3wrgh1876zNYqpTpguJTSOzAVpV9tA' /nix/store/7a745016z2pfi6bnynd5cagkrhpjgz09-oidc-test2 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.387Z level=WARN msg="--auth-token is deprecated: tokens on the command line are visible in /proc and shell history; use --auth-token-path or --auth-token-script" vm-test-run-nixos-test-niks3> server # [ 29.732920] niks3-server[968]: 2026/10/01 10:21:10 WARN Authentication failed token_preview=eyJhbGciOi...SOzAVpV9tA token_length=676 oidc_error="no provider could verify the token (signature or issuer mismatch)" oidc_provider="" tried_providers=[test] vm-test-run-nixos-test-niks3> server # [ 29.766386] systemd[1]: Started Nix Daemon instance (PID 1431/UID 0). vm-test-run-nixos-test-niks3> server # [ 29.805481] nix-daemon[1433]: remote pid 1431 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 29.815919] systemd[1]: nix-daemon@12-13-1431_1432-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 29.821429] niks3-server[968]: 2026/10/01 10:21:10 WARN Authentication failed token_preview=eyJhbGciOi...SOzAVpV9tA token_length=676 oidc_error="no provider could verify the token (signature or issuer mismatch)" oidc_provider="" tried_providers=[test] vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.516Z level=ERROR msg="Fatal error" error="pushing paths: creating pending closures: creating push: server returned 401: Unauthorized\n" vm-test-run-nixos-test-niks3> server: (finished: must fail: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'eyJhbGciOiJSUzI1NiIsImtpZCI6IktYX3hBVXhXcGNEdDZIaDBYUVpNNlB0aE53RXpjTkx3Z3gzMU5vc3J6NDQiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJodHRwOi8vd3Jvbmc6NTc1MSIsImV4cCI6MTc5MDg1MzY3MCwiaWF0IjoxNzkwODUwMDcwLCJpc3MiOiJodHRwOi8vMTI3LjAuMC4xOjgwODAvb2lkYyIsInJlcG9zaXRvcnlfb3duZXIiOiJteW9yZyIsInN1YiI6InJlcG86bXlvcmcvbXlyZXBvOnJlZjpyZWZzL2hlYWRzL21haW4ifQ.Xyijan-Kg2xMkYGoRgrcf7ZBgQyzccG5vQJhcke9Ui961Hz0NVVWQFqNGNpuLSGzXPuVeSez5l4LCRs4JCZVxYD-nnzWh2X6EXsE8p7kzrZWp0CQTDP4VhY9wDxA2ZHkZXiXfZ2DmDAeeOZOTBt9FtI4fVyUuXGW3QQrX6_QFC1H75Ffq5318DGxJJOtQGwbN6DHJC9KY595-dVNrnnqtu-hn2xkSxOO_HnfIYO4dB75ZnOtxWS2UDQc2VQQZKe1IFP8hoEznnnipkDRTTjrNNZOniszfNhdsxNbvGgBfffRkuaripWtZd-l3wrgh1876zNYqpTpguJTSOzAVpV9tA' /nix/store/7a745016z2pfi6bnynd5cagkrhpjgz09-oidc-test2, in 0.15 seconds) vm-test-run-nixos-test-niks3> server: must fail: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'not-a-valid-jwt-token' /nix/store/7a745016z2pfi6bnynd5cagkrhpjgz09-oidc-test2 vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.533Z level=WARN msg="--auth-token is deprecated: tokens on the command line are visible in /proc and shell history; use --auth-token-path or --auth-token-script" vm-test-run-nixos-test-niks3> server # [ 29.877110] niks3-server[968]: 2026/10/01 10:21:10 WARN Authentication failed token_preview=not-a-valid-jwt-token token_length=21 oidc_error="no provider could verify the token (signature or issuer mismatch)" oidc_provider="" tried_providers=[test] vm-test-run-nixos-test-niks3> server # [ 29.912313] systemd[1]: Started Nix Daemon instance (PID 1452/UID 0). vm-test-run-nixos-test-niks3> server # [ 29.951347] nix-daemon[1454]: remote pid 1452 is unknown user (trusted) vm-test-run-nixos-test-niks3> server # [ 29.961436] systemd[1]: nix-daemon@13-14-1452_1453-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 29.966719] niks3-server[968]: 2026/10/01 10:21:10 WARN Authentication failed token_preview=not-a-valid-jwt-token token_length=21 oidc_error="no provider could verify the token (signature or issuer mismatch)" oidc_provider="" tried_providers=[test] vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.661Z level=ERROR msg="Fatal error" error="pushing paths: creating pending closures: creating push: server returned 401: Unauthorized\n" vm-test-run-nixos-test-niks3> server: (finished: must fail: NIKS3_SERVER_URL=http://server:5751 /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --auth-token 'not-a-valid-jwt-token' /nix/store/7a745016z2pfi6bnynd5cagkrhpjgz09-oidc-test2, in 0.14 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins create hello-pin /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.018877] niks3-server[968]: 2026/10/01 10:21:10 INFO Received create pin request method=POST path=/api/pins/hello-pin vm-test-run-nixos-test-niks3> server # [ 30.028240] niks3-server[968]: 2026/10/01 10:21:10 INFO Created/updated pin name=hello-pin store_path=/nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 narinfo_key=xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi.narinfo vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.722Z level=INFO msg="Created pin" name=hello-pin store_path=/nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins create hello-pin /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> , in 0.06 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.081277] niks3-server[968]: 2026/10/01 10:21:10 INFO Received list pins request method=GET path=/api/pins vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list vm-test-run-nixos-test-niks3> , in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --names-only vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.129924] niks3-server[968]: 2026/10/01 10:21:10 INFO Received list pins request method=GET path=/api/pins vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --names-only vm-test-run-nixos-test-niks3> , in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --json vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.177419] niks3-server[968]: 2026/10/01 10:21:10 INFO Received list pins request method=GET path=/api/pins vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --json vm-test-run-nixos-test-niks3> , in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> export S3_ENDPOINT_URL=http://localhost:9000 vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> /nix/store/59rphn0qd8k90mdggjdak165a0ysaclw-s5cmd-2.3.0/bin/s5cmd cat s3://niks3-test/pins/hello-pin vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> export S3_ENDPOINT_URL=http://localhost:9000 vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> /nix/store/59rphn0qd8k90mdggjdak165a0ysaclw-s5cmd-2.3.0/bin/s5cmd cat s3://niks3-test/pins/hello-pin vm-test-run-nixos-test-niks3> , in 0.02 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --pin ca-pin /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.944Z level=INFO msg="All 1 paths already cached" vm-test-run-nixos-test-niks3> server # [ 30.253257] niks3-server[968]: 2026/10/01 10:21:10 INFO Received create pin request method=POST path=/api/pins/ca-pin vm-test-run-nixos-test-niks3> server # [ 30.261484] niks3-server[968]: 2026/10/01 10:21:10 INFO Created/updated pin name=ca-pin store_path=/nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log narinfo_key=dv59n3bx90hi3c1q8jg1dshwsg6jf2sv.narinfo vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:10.955Z level=INFO msg="Created pin" name=ca-pin store_path=/nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 push --pin ca-pin /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> , in 0.06 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --names-only vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.314229] niks3-server[968]: 2026/10/01 10:21:11 INFO Received list pins request method=GET path=/api/pins vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --names-only vm-test-run-nixos-test-niks3> , in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins delete hello-pin vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.365445] niks3-server[968]: 2026/10/01 10:21:11 INFO Received delete pin request method=DELETE path=/api/pins/hello-pin vm-test-run-nixos-test-niks3> server # [ 30.379253] niks3-server[968]: 2026/10/01 10:21:11 INFO Deleted pin name=hello-pin vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:11.071Z level=INFO msg="Deleted pin" name=hello-pin vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins delete hello-pin vm-test-run-nixos-test-niks3> , in 0.06 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --names-only vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.430951] niks3-server[968]: 2026/10/01 10:21:11 INFO Received list pins request method=GET path=/api/pins vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins list --names-only vm-test-run-nixos-test-niks3> , in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must fail: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins create bad-pin /nix/store/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa-nonexistent vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server # [ 30.479941] niks3-server[968]: 2026/10/01 10:21:11 INFO Received create pin request method=POST path=/api/pins/bad-pin vm-test-run-nixos-test-niks3> server # [ 30.482101] niks3-server[968]: 2026/10/01 10:21:11 ERROR Failed to get closure for pin narinfo_key=aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa.narinfo error="no rows in result set" vm-test-run-nixos-test-niks3> server # time=2026-10-01T10:21:11.176Z level=ERROR msg="Fatal error" error="creating pin: server returned 404: closure not found: store path must be pushed before pinning\n" vm-test-run-nixos-test-niks3> server: (finished: must fail: vm-test-run-nixos-test-niks3> NIKS3_SERVER_URL=http://server:5751 NIKS3_AUTH_TOKEN_FILE=/tmp/test-config/auth-token /nix/store/3h1z2vv0clnn5nrpbxlzzl37c3pna775-niks3-1.13.0/bin/niks3 pins create bad-pin /nix/store/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa-nonexistent vm-test-run-nixos-test-niks3> , in 0.05 seconds) vm-test-run-nixos-test-niks3> server: must succeed: systemctl start niks3-gc.service vm-test-run-nixos-test-niks3> server # [ 30.506548] systemd[1]: Starting niks3 garbage collection... vm-test-run-nixos-test-niks3> server # [ 30.547890] niks3[1580]: time=2026-10-01T10:21:11.239Z level=INFO msg="Starting garbage collection" older-than=720h failed-uploads-older-than=6h force=false vm-test-run-nixos-test-niks3> server # [ 30.551138] niks3-server[968]: 2026/10/01 10:21:11 INFO Starting cleanup of old closures method=DELETE path=/api/closures vm-test-run-nixos-test-niks3> server # [ 30.553247] niks3[1580]: time=2026-10-01T10:21:11.245Z level=INFO msg="Garbage collection started" vm-test-run-nixos-test-niks3> server # [ 30.556140] niks3-server[968]: 2026/10/01 10:21:11 INFO Aborted multipart uploads count=0 kept=0 vm-test-run-nixos-test-niks3> server # [ 30.564752] niks3-server[968]: 2026/10/01 10:21:11 INFO Garbage collection completed failed-uploads-deleted=0 old-closures-deleted=0 objects-marked-for-deletion=3 objects-deleted-after-grace-period=0 objects-failed-to-delete=0 vm-test-run-nixos-test-niks3> server # [ 30.569697] niks3-server[968]: 2026/10/01 10:21:11 INFO Vacuumed table table=pending_closures vm-test-run-nixos-test-niks3> server # [ 30.573842] niks3-server[968]: 2026/10/01 10:21:11 INFO Vacuumed table table=pending_objects vm-test-run-nixos-test-niks3> server # [ 30.578174] niks3-server[968]: 2026/10/01 10:21:11 INFO Vacuumed table table=multipart_uploads vm-test-run-nixos-test-niks3> server # [ 30.581278] niks3-server[968]: 2026/10/01 10:21:11 INFO Vacuumed table table=closures vm-test-run-nixos-test-niks3> server # [ 30.584563] niks3-server[968]: 2026/10/01 10:21:11 INFO Vacuumed table table=objects vm-test-run-nixos-test-niks3> server # [ 32.555718] niks3[1580]: time=2026-10-01T10:21:13.246Z level=INFO msg="Garbage collection progress" phase="" failed_uploads_deleted=0 old_closures_deleted=0 objects_marked=3 objects_deleted=0 objects_failed=0 vm-test-run-nixos-test-niks3> server # [ 32.562758] niks3[1580]: time=2026-10-01T10:21:13.246Z level=INFO msg="Garbage collection completed successfully" failed-uploads-deleted=0 old-closures-deleted=0 objects-marked-for-deletion=3 objects-deleted-after-grace-period=0 objects-failed-to-delete=0 vm-test-run-nixos-test-niks3> server # [ 32.574453] systemd[1]: niks3-gc.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 32.576989] systemd[1]: Finished niks3 garbage collection. vm-test-run-nixos-test-niks3> server # [ 32.580668] systemd[1]: niks3-gc.service: Consumed 35ms CPU time over 2.067s wall clock time, 2.7M memory peak, 1.2K incoming IP traffic, 823B outgoing IP traffic. vm-test-run-nixos-test-niks3> server: (finished: must succeed: systemctl start niks3-gc.service, in 2.10 seconds) vm-test-run-nixos-test-niks3> builder: waiting for unit niks3-auto-upload.socket vm-test-run-nixos-test-niks3> builder: waiting for the VM to finish booting vm-test-run-nixos-test-niks3> builder: Guest shell says: b'Spawning backdoor root shell...\n' vm-test-run-nixos-test-niks3> builder: connected to guest root shell vm-test-run-nixos-test-niks3> builder: (connecting took 0.00 seconds) vm-test-run-nixos-test-niks3> builder: (finished: waiting for the VM to finish booting, in 0.00 seconds) vm-test-run-nixos-test-niks3> builder: (finished: waiting for unit niks3-auto-upload.socket, in 0.05 seconds) vm-test-run-nixos-test-niks3> builder: must succeed: test -S /run/niks3/upload-to-cache.sock vm-test-run-nixos-test-niks3> builder: (finished: must succeed: test -S /run/niks3/upload-to-cache.sock, in 0.02 seconds) vm-test-run-nixos-test-niks3> builder: must succeed: grep post-build-hook /etc/nix/nix.conf vm-test-run-nixos-test-niks3> builder: (finished: must succeed: grep post-build-hook /etc/nix/nix.conf, in 0.02 seconds) vm-test-run-nixos-test-niks3> builder: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/test-drv.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "post-build-hook-test"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'hello from post-build-hook test' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> builder: (finished: must succeed: vm-test-run-nixos-test-niks3> cat > /tmp/test-drv.nix << 'EOF' vm-test-run-nixos-test-niks3> derivation { vm-test-run-nixos-test-niks3> name = "post-build-hook-test"; vm-test-run-nixos-test-niks3> system = builtins.currentSystem; vm-test-run-nixos-test-niks3> builder = "/bin/sh"; vm-test-run-nixos-test-niks3> args = [ "-c" "echo 'hello from post-build-hook test' > $out" ]; vm-test-run-nixos-test-niks3> } vm-test-run-nixos-test-niks3> EOF vm-test-run-nixos-test-niks3> , in 0.01 seconds) vm-test-run-nixos-test-niks3> builder: must succeed: nix-build --log-format bar-with-logs /tmp/test-drv.nix --no-out-link vm-test-run-nixos-test-niks3> builder # warning: Nix search path entry '/nix/var/nix/profiles/per-user/root/channels' does not exist, ignoring vm-test-run-nixos-test-niks3> builder # [ 32.796749] systemd[1]: Created slice Slice /system/nix-daemon. vm-test-run-nixos-test-niks3> builder # [ 32.799676] systemd[1]: Started Nix Daemon instance (PID 787/UID 0). vm-test-run-nixos-test-niks3> builder # [ 32.844778] nix-daemon[791]: remote pid 787 is unknown user (trusted) vm-test-run-nixos-test-niks3> builder # warning: error: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve host: cache.nixos.org (curl error code=6); retrying in 412 ms (attempt 1/5) vm-test-run-nixos-test-niks3> builder # warning: error: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve host: cache.nixos.org (curl error code=6); retrying in 976 ms (attempt 2/5) vm-test-run-nixos-test-niks3> builder # warning: error: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve host: cache.nixos.org (curl error code=6); retrying in 1885 ms (attempt 3/5) vm-test-run-nixos-test-niks3> builder # warning: error: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve host: cache.nixos.org (curl error code=6); retrying in 4069 ms (attempt 4/5) vm-test-run-nixos-test-niks3> builder # warning: Failed to setup the substituter at URI 'https://cache.nixos.org/': error: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve host: cache.nixos.org (curl error code=6) vm-test-run-nixos-test-niks3> builder # this derivation will be built: vm-test-run-nixos-test-niks3> builder # /nix/store/18i07rp8izmxp36zd16yskand976x033-post-build-hook-test.drv vm-test-run-nixos-test-niks3> builder # building '/nix/store/18i07rp8izmxp36zd16yskand976x033-post-build-hook-test.drv'... vm-test-run-nixos-test-niks3> builder # [ 40.420804] systemd[1]: Started niks3 auto-upload daemon. vm-test-run-nixos-test-niks3> builder # [ 40.526624] niks3-hook[816]: time=2026-10-01T10:21:21.641Z level=INFO msg="niks3-hook serve starting" socket=/run/niks3/upload-to-cache.sock socket-activated=true db-path=/var/lib/niks3-hook/upload-queue.db batch-size=5 idle-exit-timeout=5s drain-timeout=0s vm-test-run-nixos-test-niks3> builder # [ 40.536551] niks3-hook[816]: time=2026-10-01T10:21:21.651Z level=INFO msg="Upload queue status" pending=1 vm-test-run-nixos-test-niks3> builder # [ 40.538198] niks3-hook[816]: time=2026-10-01T10:21:21.652Z level=INFO msg="Uploading batch" count=1 vm-test-run-nixos-test-niks3> builder: (finished: must succeed: nix-build --log-format bar-with-logs /tmp/test-drv.nix --no-out-link, in 7.82 seconds) vm-test-run-nixos-test-niks3> builder: waiting for unit niks3-auto-upload.service vm-test-run-nixos-test-niks3> builder # [ 40.562330] systemd[1]: nix-daemon@0-1-787_788-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 40.563544] systemd[1]: nix-daemon@0-1-787_788-0.service: Consumed 146ms CPU time over 7.760s wall clock time, 20.9M memory peak, 1.4K outgoing IP traffic. vm-test-run-nixos-test-niks3> builder: (finished: waiting for unit niks3-auto-upload.service, in 0.07 seconds) vm-test-run-nixos-test-niks3> ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-nixos-test-niks3> File "/nix/store/vk7cx7y36sxavc4g6cv4sra2zxk4xp68-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-nixos-test-niks3> builder: waiting for success: test $(systemctl is-active niks3-auto-upload.service) = inactive vm-test-run-nixos-test-niks3> ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. vm-test-run-nixos-test-niks3> File "/nix/store/vk7cx7y36sxavc4g6cv4sra2zxk4xp68-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 vm-test-run-nixos-test-niks3> builder # [ 40.621836] systemd[1]: Started Nix Daemon instance (PID 830/UID 0). vm-test-run-nixos-test-niks3> builder # [ 40.671422] nix-daemon[837]: remote pid 830 is unknown user (trusted) vm-test-run-nixos-test-niks3> builder # [ 40.684058] systemd[1]: nix-daemon@1-2-830_831-0.service: Deactivated successfully. vm-test-run-nixos-test-niks3> server # [ 40.648866] niks3-server[968]: 2026/10/01 10:21:21 INFO Received push request method=POST path=/api/pushes vm-test-run-nixos-test-niks3> builder # [ 40.699073] niks3-hook[816]: time=2026-10-01T10:21:21.812Z level=INFO msg="Uploading 1 paths to server (0 already cached)" vm-test-run-nixos-test-niks3> builder # [ 40.700556] niks3-hook[816]: time=2026-10-01T10:21:21.812Z level=INFO msg="Uploading ykg16qhbiwqmava2ahq779zd0dfd9mjd-post-build-hook-test (144B)" vm-test-run-nixos-test-niks3> server # [ 40.694145] niks3-server[968]: 2026/10/01 10:21:21 INFO Registered completed upload object_key=nar/1a0vfw93shmvlz6lac7d1lv82jxzfdswigh5s32hpvncf74i1i0y.nar.zst vm-test-run-nixos-test-niks3> server # [ 40.697442] niks3-server[968]: 2026/10/01 10:21:21 INFO Received sign narinfos request method=POST path=/api/pushes/6/sign vm-test-run-nixos-test-niks3> server # [ 40.699854] niks3-server[968]: 2026/10/01 10:21:21 INFO Signed narinfos id=6 count=1 vm-test-run-nixos-test-niks3> builder # [ 40.738966] niks3-hook[816]: time=2026-10-01T10:21:21.853Z level=INFO msg="Uploading 1 narinfos" vm-test-run-nixos-test-niks3> server # [ 40.705146] niks3-server[968]: 2026/10/01 10:21:21 INFO Registered completed upload object_key=ykg16qhbiwqmava2ahq779zd0dfd9mjd.ls vm-test-run-nixos-test-niks3> server # [ 40.707774] niks3-server[968]: 2026/10/01 10:21:21 INFO Registered completed upload object_key=log/18i07rp8izmxp36zd16yskand976x033-post-build-hook-test.drv vm-test-run-nixos-test-niks3> server # [ 40.711054] niks3-server[968]: 2026/10/01 10:21:21 INFO Received complete push request method=POST path=/api/pushes/6/complete vm-test-run-nixos-test-niks3> builder # [ 40.756723] niks3-hook[816]: time=2026-10-01T10:21:21.871Z level=INFO msg="Upload complete. (219ms)" vm-test-run-nixos-test-niks3> server # [ 40.718508] niks3-server[968]: 2026/10/01 10:21:21 INFO Registered completed upload object_key=ykg16qhbiwqmava2ahq779zd0dfd9mjd.narinfo vm-test-run-nixos-test-niks3> builder # [ 45.535743] niks3-hook[816]: time=2026-10-01T10:21:26.649Z level=INFO msg="Idle timeout reached and queue is empty, shutting down" vm-test-run-nixos-test-niks3> builder # [ 45.540849] niks3-hook[816]: time=2026-10-01T10:21:26.654Z level=INFO msg="niks3-hook serve stopped" vm-test-run-nixos-test-niks3> builder # [ 45.554889] systemd[1]: niks3-auto-upload.service: Deactivated successfully. vm-test-run-nixos-test-niks3> builder # [ 45.558760] systemd[1]: niks3-auto-upload.service: Consumed 118ms CPU time over 5.137s wall clock time, 10.8M memory peak, 68K written to disk, 5.9K incoming IP traffic, 8.9K outgoing IP traffic. vm-test-run-nixos-test-niks3> builder: (finished: waiting for success: test $(systemctl is-active niks3-auto-upload.service) = inactive, in 5.20 seconds) vm-test-run-nixos-test-niks3> server: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/hook-test-store /nix/store/ykg16qhbiwqmava2ahq779zd0dfd9mjd-post-build-hook-test vm-test-run-nixos-test-niks3> vm-test-run-nixos-test-niks3> server: (finished: must succeed: vm-test-run-nixos-test-niks3> export AWS_ACCESS_KEY_ID=rustfsadmin vm-test-run-nixos-test-niks3> export AWS_SECRET_ACCESS_KEY=rustfsadmin vm-test-run-nixos-test-niks3> nix copy --from 's3://niks3-test?endpoint=http://server:9000®ion=us-east-1' --to /tmp/hook-test-store /nix/store/ykg16qhbiwqmava2ahq779zd0dfd9mjd-post-build-hook-test vm-test-run-nixos-test-niks3> , in 0.15 seconds) vm-test-run-nixos-test-niks3> server: must succeed: nix --store /tmp/hook-test-store store cat /nix/store/ykg16qhbiwqmava2ahq779zd0dfd9mjd-post-build-hook-test vm-test-run-nixos-test-niks3> server: (finished: must succeed: nix --store /tmp/hook-test-store store cat /nix/store/ykg16qhbiwqmava2ahq779zd0dfd9mjd-post-build-hook-test, in 0.04 seconds) vm-test-run-nixos-test-niks3> (finished: run the VM test script, in 47.10 seconds) vm-test-run-nixos-test-niks3> test script finished in 47.18s vm-test-run-nixos-test-niks3> cleanup vm-test-run-nixos-test-niks3> kill QemuMachine (pid 47) vm-test-run-nixos-test-niks3> builder # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14) vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:21:27Z INFO virtiofsd] Client disconnected, shutting down vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:21:27Z INFO virtiofsd] Client disconnected, shutting down vm-test-run-nixos-test-niks3> builder # [2026-10-01T10:21:27Z INFO virtiofsd] Client disconnected, shutting down vm-test-run-nixos-test-niks3> kill QemuMachine (pid 48) vm-test-run-nixos-test-niks3> server # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14) vm-test-run-nixos-test-niks3> server # [2026-10-01T10:21:27Z INFO virtiofsd] Client disconnected, shutting down vm-test-run-nixos-test-niks3> server # [2026-10-01T10:21:27Z INFO virtiofsd] Client disconnected, shutting down vm-test-run-nixos-test-niks3> server # [2026-10-01T10:21:27Z INFO virtiofsd] Client disconnected, shutting down vm-test-run-nixos-test-niks3> (finished: cleanup, in 0.51 seconds) vm-test-run-nixos-test-niks3> additionally exposed symbols: vm-test-run-nixos-test-niks3> builder, server, vm-test-run-nixos-test-niks3> vlan1, vm-test-run-nixos-test-niks3> start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh vm-test-run-nixos-test-niks3> Hello store path: /nix/store/xl1h9i29pgq2q5cszjhm5wpfxfbbqwyi-hello-2.12.3 vm-test-run-nixos-test-niks3> Test output path: /nix/store/dv59n3bx90hi3c1q8jg1dshwsg6jf2sv-test-build-log vm-test-run-nixos-test-niks3> Symlink wrapper store path: /nix/store/1czajpbpppk7h9y4k4w3hxz0xs25srq3-symlink-wrapper vm-test-run-nixos-test-niks3> Symlink wrapper points to: /nix/store/x9d9hyw8xybijhpvipmkiryn9n8nw3ij-base-package/bin/test-program vm-test-run-nixos-test-niks3> OIDC test store path: /nix/store/hp57zlhhih1lr1f0hfrf8sca8fvgxc2i-oidc-test vm-test-run-nixos-test-niks3> Valid OIDC token obtained (length=677) vm-test-run-nixos-test-niks3> OIDC push with valid token: SUCCESS vm-test-run-nixos-test-niks3> Invalid OIDC token obtained (wrong org) vm-test-run-nixos-test-niks3> OIDC push with wrong org: correctly rejected vm-test-run-nixos-test-niks3> Wrong audience OIDC token obtained vm-test-run-nixos-test-niks3> OIDC push with wrong audience: correctly rejected vm-test-run-nixos-test-niks3> OIDC push with malformed token: correctly rejected vm-test-run-nixos-test-niks3> All OIDC tests passed! vm-test-run-nixos-test-niks3> All pin tests passed! vm-test-run-nixos-test-niks3> Built store path: /nix/store/ykg16qhbiwqmava2ahq779zd0dfd9mjd-post-build-hook-test vm-test-run-nixos-test-niks3> Post-build-hook pipeline test passed! post-build step Upload coverage to codecov: ok Skipping codecov: project=Mic92/niks3 attr=checks.x86_64-linux.nixos-test-niks3-lix