Mic92/nix-update build #75 failed ← #74 #76 →
eval warnings
4 kinds
· 14 occurrences
- error ×5
- error Nixpkgs 26.11 has dropped support for x86_64-darwin. ×1
- error Refusing to evaluate package 'pnpm-9.15.9' in /nix/store/…-source/pkgs/development/tools/pnpm/generic.nix:164 because it is marked as insecure ×4
- warn 'elixir' is deprecated in favor of using the beamPackages sets. Use 'beamPackages.elixir' instead. ×4
13 failed
| status | attribute | duration |
|---|---|---|
aarch64-darwin.test-deps
|
— | |
error: … while calling the 'derivationStrict' builtin at «nix-internal»/derivation-internal.nix:37:12: 36| 37| strict = …error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'test-deps'
whose name attribute is located at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11
… while evaluating attribute 'buildCommand' of derivation 'test-deps'
at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-9.15.9' in /nix/store/51z7p4g46ybpi81ipn10c9fs2i0vvqs3-source/pkgs/development/tools/pnpm/generic.nix:164 because it is marked as insecure
Known issues:
- CVE-2026-48995
- CVE-2026-50014
- CVE-2026-50015
- CVE-2026-50016
- CVE-2026-50017
- CVE-2026-50573
- CVE-2026-55699
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-9.15.9’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-9.15.9’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
|
||
aarch64-linux.devShell-default
|
0s | |
python3-3.14.6-env: /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hh …python3-3.14.6-env: /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 1192: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 172: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 174: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 278: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied |
||
aarch64-linux.formatting
|
0s | |
treefmt.toml: /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rl …treefmt.toml: /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 1192: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 172: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 174: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 278: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/ix2khgv4k3j2mm5yf2hhnyp0rlhfp2nz-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied |
||
aarch64-linux.package-default
|
11s | |
nix-update-1.16.0: /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3p …nix-update-1.16.0: /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/sfbjq7mllid60l3jvxw0q2gknqldyy2l-python3-3.14.6/nix-support/setup-hook: line 2: $1: unbound variable /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 172: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 256: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 259: /dev/null: Permission denied |
||
aarch64-linux.package-nix-update
|
6s | |
nix-update-1.16.0: /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3p …nix-update-1.16.0: /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/sfbjq7mllid60l3jvxw0q2gknqldyy2l-python3-3.14.6/nix-support/setup-hook: line 2: $1: unbound variable /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 172: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 256: /dev/null: Permission denied /nix/store/x2nn0gxp53a95nl72xysa73vn3pjk8xm-stdenv-linux/setup: line 259: /dev/null: Permission denied |
||
aarch64-linux.test-deps
|
— | |
error: … while calling the 'derivationStrict' builtin at «nix-internal»/derivation-internal.nix:37:12: 36| 37| strict = …error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'test-deps'
whose name attribute is located at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11
… while evaluating attribute 'buildCommand' of derivation 'test-deps'
at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-9.15.9' in /nix/store/51z7p4g46ybpi81ipn10c9fs2i0vvqs3-source/pkgs/development/tools/pnpm/generic.nix:164 because it is marked as insecure
Known issues:
- CVE-2026-48995
- CVE-2026-50014
- CVE-2026-50015
- CVE-2026-50016
- CVE-2026-50017
- CVE-2026-50573
- CVE-2026-55699
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-9.15.9’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-9.15.9’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
|
||
riscv64-linux.test-deps
|
— | |
error: … while calling the 'derivationStrict' builtin at «nix-internal»/derivation-internal.nix:37:12: 36| 37| strict = …error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'test-deps'
whose name attribute is located at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11
… while evaluating attribute 'buildCommand' of derivation 'test-deps'
at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-9.15.9' in /nix/store/51z7p4g46ybpi81ipn10c9fs2i0vvqs3-source/pkgs/development/tools/pnpm/generic.nix:164 because it is marked as insecure
Known issues:
- CVE-2026-48995
- CVE-2026-50014
- CVE-2026-50015
- CVE-2026-50016
- CVE-2026-50017
- CVE-2026-50573
- CVE-2026-55699
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-9.15.9’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-9.15.9’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
|
||
x86_64-darwin
|
— | |
error: … in the left operand of the update (//) operator at /var/lib/nixbot/worktrees/679-07019c0f2124-99c97dd3/flake.nix:64:12: 63| …error:
… in the left operand of the update (//) operator
at /var/lib/nixbot/worktrees/679-07019c0f2124-99c97dd3/flake.nix:64:12:
63| // devShells
64| // lib.optionalAttrs (system != "riscv64-linux") {
| ^
65| formatting = treefmtEval.${system}.config.build.check self;
… while evaluating a branch condition
at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/lib/attrsets.nix:1482:29:
1481| */
1482| optionalAttrs = cond: as: if cond then as else { };
| ^
1483|
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Nixpkgs 26.11 has dropped support for x86_64-darwin.
The 26.05 stable branch still supports x86_64-darwin, and will
receive security fixes until the end of 2026. If you use channels,
you can switch to 26.05 as follows:
$ sudo nix-channel --add https://nixos.org/channels/nixpkgs-26.05-darwin nixpkgs
$ sudo nix-channel --update
If this doesn’t work, you may need to run:
# Lack of sudo is deliberate:
$ nix-channel --remove nixpkgs
If you use flakes, switch your flake input:
inputs.nixpkgs = {
url = "github:NixOS/nixpkgs/nixpkgs-26.05-darwin";
};
See the release notes for more information and alternatives:
https://nixos.org/manual/nixpkgs/unstable/release-notes#x86_64-darwin-26.11
|
||
x86_64-linux.devShell-default
|
0s | |
python3-3.14.6-env: /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8 …python3-3.14.6-env: /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 1192: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 172: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 174: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 278: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied |
||
x86_64-linux.formatting
|
0s | |
treefmt.toml: /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4 …treefmt.toml: /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 1192: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 172: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 174: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 278: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 256: /dev/null: Permission denied /nix/store/gikfyrrg5a864lkr2px8rgkgd4b61ri2-stdenv-linux-no-cc/setup: line 259: /dev/null: Permission denied |
||
x86_64-linux.package-default
|
5s | |
nix-update-1.16.0: /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd …nix-update-1.16.0: /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/jxyrvv4gbpnp3ap5iy7wxwl1sg4x2x88-python3-3.14.6/nix-support/setup-hook: line 2: $1: unbound variable /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 172: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 256: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 259: /dev/null: Permission denied |
||
x86_64-linux.package-nix-update
|
5s | |
nix-update-1.16.0: /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd …nix-update-1.16.0: /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/jxyrvv4gbpnp3ap5iy7wxwl1sg4x2x88-python3-3.14.6/nix-support/setup-hook: line 2: $1: unbound variable /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 172: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 174: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 278: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 256: /dev/null: Permission denied /nix/store/sg7xjcivmh51ckjdr7bjik3lghd8kjax-stdenv-linux/setup: line 259: /dev/null: Permission denied |
||
x86_64-linux.test-deps
|
— | |
error: … while calling the 'derivationStrict' builtin at «nix-internal»/derivation-internal.nix:37:12: 36| 37| strict = …error:
… while calling the 'derivationStrict' builtin
at «nix-internal»/derivation-internal.nix:37:12:
36|
37| strict = derivationStrict drvAttrs;
| ^
38|
… while evaluating derivation 'test-deps'
whose name attribute is located at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11
… while evaluating attribute 'buildCommand' of derivation 'test-deps'
at «github:NixOS/nixpkgs/716c7a2664ca8325617b8a7fbb609273f2c4cae7?narHash=sha256-zbcZ1dmBTPfJ7Mlqh/yLEPGpgJnwuv4Xr1xucy2WqMA%3D»/pkgs/build-support/trivial-builders/default.nix:81:17:
80| enableParallelBuilding = true;
81| inherit buildCommand name;
| ^
82| passAsFile = [ "buildCommand" ] ++ (derivationArgs.passAsFile or [ ]);
(stack trace truncated; use '--show-trace' to show the full, detailed trace)
error: Refusing to evaluate package 'pnpm-9.15.9' in /nix/store/51z7p4g46ybpi81ipn10c9fs2i0vvqs3-source/pkgs/development/tools/pnpm/generic.nix:164 because it is marked as insecure
Known issues:
- CVE-2026-48995
- CVE-2026-50014
- CVE-2026-50015
- CVE-2026-50016
- CVE-2026-50017
- CVE-2026-50573
- CVE-2026-55699
You can install it anyway by allowing this package, using the
following methods:
a) To temporarily allow all insecure packages, you can use an environment
variable for a single invocation of the nix tools:
$ export NIXPKGS_ALLOW_INSECURE=1
Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
then pass `--impure` in order to allow use of environment variables.
b) for `nixos-rebuild` you can add ‘pnpm-9.15.9’ to
`nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
like so:
{
nixpkgs.config.permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
‘pnpm-9.15.9’ to `permittedInsecurePackages` in
~/.config/nixpkgs/config.nix, like so:
{
permittedInsecurePackages = [
"pnpm-9.15.9"
];
}
|
||
4 succeeded
| status | attribute | duration |
|---|---|---|
| loading… | ||