nixbot

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'nix-shell'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
         at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:719:11:
          718|           depsBuildBuild = buildBuildOutputs;
          719|           nativeBuildInputs = buildHostOutputs;
             |           ^
          720|           depsBuildTarget = buildTargetOutputs;

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'radicle-mirror-0.1.0'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'postInstall' of derivation 'radicle-mirror-0.1.0'
         at «git+file:///var/lib/nixbot/worktrees/1332103-a87f2d622be6-414?ref=HEAD&rev=5d56f1235590ffb869f72349524e77c2bd53c344»/nix/package.nix:31:3:
           30|   nativeCheckInputs = [ git ];
           31|   postInstall = ''
             |   ^
           32|     wrapProgram $out/bin/radicle \

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'radicle-mirror-0.1.0'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'postInstall' of derivation 'radicle-mirror-0.1.0'
         at «git+file:///var/lib/nixbot/worktrees/1332103-a87f2d622be6-414?ref=HEAD&rev=5d56f1235590ffb869f72349524e77c2bd53c344»/nix/package.nix:31:3:
           30|   nativeCheckInputs = [ git ];
           31|   postInstall = ''
             |   ^
           32|     wrapProgram $out/bin/radicle \

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'nix-shell'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
         at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:719:11:
          718|           depsBuildBuild = buildBuildOutputs;
          719|           nativeBuildInputs = buildHostOutputs;
             |           ^
          720|           depsBuildTarget = buildTargetOutputs;

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating the attribute 'drvPath'
         at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/lib/customisation.nix:416:11:
          415|         // {
          416|           drvPath =
             |           ^
          417|             assert condition;

       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating the option `driverConfiguration.vms.machine.start_script':

       … while evaluating definitions from `/nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/nixos/lib/testing/driver-configuration.nix':

       … while evaluating the option `nodes.machine.system.build.toplevel':

       … while evaluating definitions from `/nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/nixos/modules/system/activation/top-level.nix':

       … while evaluating the option `nodes.machine.warnings':

       … while evaluating definitions from `/nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/nixos/modules/system/boot/systemd.nix':

       … while evaluating the option `nodes.machine.systemd.services.radicle-mirror.serviceConfig':

       … while evaluating definitions from `/nix/store/7rqzas52bbgfzzhcx8mrvhgm7bkxbg5q-source/nix/module.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'radicle-mirror-0.1.0'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'postInstall' of derivation 'radicle-mirror-0.1.0'
         at «git+file:///var/lib/nixbot/worktrees/1332103-a87f2d622be6-414?ref=HEAD&rev=5d56f1235590ffb869f72349524e77c2bd53c344»/nix/package.nix:31:3:
           30|   nativeCheckInputs = [ git ];
           31|   postInstall = ''
             |   ^
           32|     wrapProgram $out/bin/radicle \

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'radicle-mirror-0.1.0'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'postInstall' of derivation 'radicle-mirror-0.1.0'
         at «git+file:///var/lib/nixbot/worktrees/1332103-a87f2d622be6-414?ref=HEAD&rev=5d56f1235590ffb869f72349524e77c2bd53c344»/nix/package.nix:31:3:
           30|   nativeCheckInputs = [ git ];
           31|   postInstall = ''
             |   ^
           32|     wrapProgram $out/bin/radicle \

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'nix-shell'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'nativeBuildInputs' of derivation 'nix-shell'
         at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:719:11:
          718|           depsBuildBuild = buildBuildOutputs;
          719|           nativeBuildInputs = buildHostOutputs;
             |           ^
          720|           depsBuildTarget = buildTargetOutputs;

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while evaluating the attribute 'drvPath'
         at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/lib/customisation.nix:416:11:
          415|         // {
          416|           drvPath =
             |           ^
          417|             assert condition;

       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating the option `driverConfiguration.vms.machine.start_script':

       … while evaluating definitions from `/nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/nixos/lib/testing/driver-configuration.nix':

       … while evaluating the option `nodes.machine.system.build.toplevel':

       … while evaluating definitions from `/nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/nixos/modules/system/activation/top-level.nix':

       … while evaluating the option `nodes.machine.warnings':

       … while evaluating definitions from `/nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/nixos/modules/system/boot/systemd.nix':

       … while evaluating the option `nodes.machine.systemd.services.radicle-mirror.serviceConfig':

       … while evaluating definitions from `/nix/store/7rqzas52bbgfzzhcx8mrvhgm7bkxbg5q-source/nix/module.nix':

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'radicle-mirror-0.1.0'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'postInstall' of derivation 'radicle-mirror-0.1.0'
         at «git+file:///var/lib/nixbot/worktrees/1332103-a87f2d622be6-414?ref=HEAD&rev=5d56f1235590ffb869f72349524e77c2bd53c344»/nix/package.nix:31:3:
           30|   nativeCheckInputs = [ git ];
           31|   postInstall = ''
             |   ^
           32|     wrapProgram $out/bin/radicle \

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

error:
       … while calling the 'derivationStrict' builtin
         at «nix-internal»/derivation-internal.nix:37:12:
           36|
           37|   strict = derivationStrict drvAttrs;
             |            ^
           38|

       … while evaluating derivation 'radicle-mirror-0.1.0'
         whose name attribute is located at «github:NixOS/nixpkgs/a7868a727837f3c09cee2ce0ca671c76b1589fed?narHash=sha256-KgItSKML8Xvte0B7/uGnBDsYzSnnKHcOaiUbgWBXLXw%3D»/pkgs/stdenv/generic/make-derivation.nix:651:11

       … while evaluating attribute 'postInstall' of derivation 'radicle-mirror-0.1.0'
         at «git+file:///var/lib/nixbot/worktrees/1332103-a87f2d622be6-414?ref=HEAD&rev=5d56f1235590ffb869f72349524e77c2bd53c344»/nix/package.nix:31:3:
           30|   nativeCheckInputs = [ git ];
           31|   postInstall = ''
             |   ^
           32|     wrapProgram $out/bin/radicle \

       (stack trace truncated; use '--show-trace' to show the full, detailed trace)

       error: Refusing to evaluate package 'radicle-node-1.10.3' in /nix/store/5wwvz80gd6v1z981bsrvr7c1vhkyc3as-source/pkgs/by-name/ra/radicle-node/package.nix:165 because it is marked as insecure

       Known issues:
        - Private repositories are insecure: traffic between nodes is not encrypted and not authenticated.

       You can install it anyway by allowing this package, using the
       following methods:

       a) To temporarily allow all insecure packages, you can use an environment
          variable for a single invocation of the nix tools:

            $ export NIXPKGS_ALLOW_INSECURE=1

          Note: When using `nix shell`, `nix build`, `nix develop`, etc with a flake,
                then pass `--impure` in order to allow use of environment variables.

       b) for `nixos-rebuild` you can add ‘radicle-node-1.10.3’ to
          `nixpkgs.config.permittedInsecurePackages` in the configuration.nix,
          like so:

            {
              nixpkgs.config.permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }

       c) For `nix-env`, `nix-build`, `nix-shell` or any other Nix command you can add
          ‘radicle-node-1.10.3’ to `permittedInsecurePackages` in
          ~/.config/nixpkgs/config.nix, like so:

            {
              permittedInsecurePackages = [
                "radicle-node-1.10.3"
              ];
            }