these 13 derivations will be built:
  /nix/store/191v3pyyfgajam819w6iqqv5wr3snk88-cargo-src-der-0.8.2.drv
  /nix/store/dxhlmzsyz7knwrhm4m1pbs14iq13s80p-cargo-package-der-0.8.2.drv
  /nix/store/6f98m9mah9dym8ycsmk5h7n2ypipc250-cargo-src-spki-0.8.1.drv
  /nix/store/hhayi0kfxkg5rng692hxhkvksvsw8p1z-cargo-package-spki-0.8.1.drv
  /nix/store/gjx47bdmgnia9zxwc5wclv5azjixadkg-cargo-src-rsa-0.10.0-rc.19.drv
  /nix/store/kxp0fgy2s9915gxxyhm089gd34xz93jv-cargo-package-rsa-0.10.0-rc.19.drv
  /nix/store/m67psvp3mh5znnp3mxf830w3q7szzld5-cargo-src-pkcs1-0.8.0-rc.5.drv
  /nix/store/w9f1q7aynnjb8bf9hvzsspv5lwa0gha6-cargo-package-pkcs1-0.8.0-rc.5.drv
  /nix/store/1ffp9bwpp7ky6a587hvyb71ilgnligz1-vendor-registry.drv
  /nix/store/gjvmnl7jrnv40h510sds9laz65mzy13b-vendor-cargo-deps.drv
  /nix/store/vkpf4m671qskwlpki1zkzvbfysxr6b7g-source.drv
  /nix/store/vdjkjk2dw97w9s40llhah5r3mh31vz6g-tincd-deps-0.1.0.drv
  /nix/store/d95d3xqksslbwsbxyawiqvw4qdqvj9sk-tincd-clippy-0.1.0.drv
building '/nix/store/vkpf4m671qskwlpki1zkzvbfysxr6b7g-source.drv'
source> tribuchet: building on eliza
building '/nix/store/d95d3xqksslbwsbxyawiqvw4qdqvj9sk-tincd-clippy-0.1.0.drv'
tincd-clippy-0.1.0> tribuchet: building on eliza
tincd-clippy-0.1.0> Running phase: unpackPhase
tincd-clippy-0.1.0> unpacking source archive /nix/store/4r36056r7yfgrdzg0snbjw6amd0gx4ds-source
tincd-clippy-0.1.0> source root is source
tincd-clippy-0.1.0> Running phase: patchPhase
tincd-clippy-0.1.0> Executing configureCargoCommonVars
tincd-clippy-0.1.0> decompressing cargo artifacts from /nix/store/n6bnm379qbi9bnv57rmr8abn3fbkwi4i-tincd-deps-0.1.0/target.tar.zst to target
tincd-clippy-0.1.0> Running phase: updateAutotoolsGnuConfigScriptsPhase
tincd-clippy-0.1.0> Running phase: configurePhase
tincd-clippy-0.1.0> will append /build/source/.cargo-home/config.toml with contents of /nix/store/3b61j2091y5sx1fa6g0fi0al92vvaknz-vendor-cargo-deps/config.toml
tincd-clippy-0.1.0> default configurePhase, nothing to do
tincd-clippy-0.1.0> Running phase: buildPhase
tincd-clippy-0.1.0> +++ command cargo --version
tincd-clippy-0.1.0> cargo 1.97.0 (c980f4866 2026-06-30)
tincd-clippy-0.1.0> +++ command cargo clippy --release --workspace --all-targets -- -D warnings
tincd-clippy-0.1.0>     Checking bitflags v2.13.2
tincd-clippy-0.1.0>    Compiling rustix v1.1.4
tincd-clippy-0.1.0>     Checking linux-raw-sys v0.12.1
tincd-clippy-0.1.0>    Compiling num-traits v0.2.19
tincd-clippy-0.1.0>     Checking fastrand v2.4.0
tincd-clippy-0.1.0>    Compiling zerocopy v0.8.59
tincd-clippy-0.1.0>     Checking once_cell v1.21.4
tincd-clippy-0.1.0>     Checking tinc-proto v0.0.0 (/build/source/crates/tinc-proto)
tincd-clippy-0.1.0>    Compiling tincd v0.1.0 (/build/source/crates/tincd)
tincd-clippy-0.1.0>    Compiling getrandom v0.3.4
tincd-clippy-0.1.0>     Checking wait-timeout v0.2.1
tincd-clippy-0.1.0>     Checking quick-error v1.2.3
tincd-clippy-0.1.0>     Checking fnv v1.0.7
tincd-clippy-0.1.0>     Checking bit-vec v0.8.0
tincd-clippy-0.1.0>     Checking unarray v0.1.4
tincd-clippy-0.1.0>     Checking regex-syntax v0.8.11
tincd-clippy-0.1.0>    Compiling tinc-ffi v0.0.0 (/build/source/crates/tinc-ffi)
tincd-clippy-0.1.0>     Checking inout v0.2.2
tincd-clippy-0.1.0>     Checking hex v0.4.3
tincd-clippy-0.1.0>     Checking cipher v0.5.2
tincd-clippy-0.1.0>     Checking nix v0.31.3
tincd-clippy-0.1.0>     Checking bit-set v0.8.0
tincd-clippy-0.1.0>     Checking chacha20 v0.10.2
tincd-clippy-0.1.0>     Checking rand_core v0.9.5
tincd-clippy-0.1.0>     Checking rand_xorshift v0.4.0
tincd-clippy-0.1.0>     Checking rand v0.9.2
tincd-clippy-0.1.0>     Checking module-lattice v0.2.3
tincd-clippy-0.1.0>     Checking crypto-bigint v0.7.5
tincd-clippy-0.1.0>     Checking ml-kem v0.3.2
tincd-clippy-0.1.0>     Checking tempfile v3.27.0
tincd-clippy-0.1.0>     Checking rusty-fork v0.3.1
tincd-clippy-0.1.0>     Checking tinc-crypto v0.0.0 (/build/source/crates/tinc-crypto)
tincd-clippy-0.1.0>     Checking tinc-sptps v0.0.0 (/build/source/crates/tinc-sptps)
tincd-clippy-0.1.0>     Checking tinc-conf v0.0.0 (/build/source/crates/tinc-conf)
tincd-clippy-0.1.0>     Checking tinc-device v0.0.0 (/build/source/crates/tinc-device)
tincd-clippy-0.1.0>     Checking crypto-primes v0.7.2
tincd-clippy-0.1.0>     Checking ppv-lite86 v0.2.21
tincd-clippy-0.1.0>     Checking netlink-packet-route v0.33.0
tincd-clippy-0.1.0>     Checking rand_chacha v0.10.0
tincd-clippy-0.1.0>     Checking rand_chacha v0.9.0
tincd-clippy-0.1.0>     Checking proptest v1.11.0
tincd-clippy-0.1.0>     Checking rsa v0.10.0-rc.19
tincd-clippy-0.1.0>     Checking tinc-tools v0.0.0 (/build/source/crates/tinc-tools)
tincd-clippy-0.1.0>     Checking netdev v0.46.3
tincd-clippy-0.1.0>     Finished `release` profile [optimized] target(s) in 26.12s
tincd-clippy-0.1.0> Running phase: installPhase
tincd-clippy-0.1.0> linking previous artifacts /nix/store/n6bnm379qbi9bnv57rmr8abn3fbkwi4i-tincd-deps-0.1.0/target.tar.zst to /nix/store/jbpdz520qy8gs145cllhqwc12kmkyprl-tincd-clippy-0.1.0/target.tar.zst
tincd-clippy-0.1.0> /*stdin*\            : 30.30%   (  61.7 MiB =>   18.7 MiB, /nix/store/jbpdz520qy8gs145cllhqwc12kmkyprl-tincd-clippy-0.1.0/target.tar.zst) 
tincd-clippy-0.1.0> Running phase: fixupPhase
tincd-clippy-0.1.0> shrinking RPATHs of ELF executables and libraries in /nix/store/jbpdz520qy8gs145cllhqwc12kmkyprl-tincd-clippy-0.1.0
tincd-clippy-0.1.0> checking for references to /build/ in /nix/store/jbpdz520qy8gs145cllhqwc12kmkyprl-tincd-clippy-0.1.0...
tincd-clippy-0.1.0> patching script interpreter paths in /nix/store/jbpdz520qy8gs145cllhqwc12kmkyprl-tincd-clippy-0.1.0

post-build step Upload coverage to codecov: ok
Skipping codecov: project=Mic92/tincr attr=checks.aarch64-linux.clippy