this derivation will be built: /nix/store/3w0d2lsigwc03lzmyq7fnd41j6pkb56j-tincd-clippy-0.1.0.drv building '/nix/store/3w0d2lsigwc03lzmyq7fnd41j6pkb56j-tincd-clippy-0.1.0.drv' tincd-clippy-0.1.0> tribuchet: building on jamie tincd-clippy-0.1.0> Running phase: unpackPhase tincd-clippy-0.1.0> unpacking source archive /nix/store/0gzia6mi5ir8zk5838b9bq0c7510pvbx-source tincd-clippy-0.1.0> source root is source tincd-clippy-0.1.0> Running phase: patchPhase tincd-clippy-0.1.0> Executing configureCargoCommonVars tincd-clippy-0.1.0> decompressing cargo artifacts from /nix/store/jmzq1qcm3056nsnwkd1b9qhysbdkbfyk-tincd-deps-0.1.0/target.tar.zst to target tincd-clippy-0.1.0> Running phase: updateAutotoolsGnuConfigScriptsPhase tincd-clippy-0.1.0> Running phase: configurePhase tincd-clippy-0.1.0> will append /build/source/.cargo-home/config.toml with contents of /nix/store/wjx1b3cmbpqclydhcsvrbkk52jvyfjzj-vendor-cargo-deps/config.toml tincd-clippy-0.1.0> default configurePhase, nothing to do tincd-clippy-0.1.0> Running phase: buildPhase tincd-clippy-0.1.0> +++ command cargo --version tincd-clippy-0.1.0> cargo 1.98.0 (797e8a9bc 2026-08-05) tincd-clippy-0.1.0> +++ command cargo clippy --release --workspace --all-targets -- -D warnings tincd-clippy-0.1.0> Compiling proc-macro2 v1.0.106 tincd-clippy-0.1.0> Compiling libc v0.2.190 tincd-clippy-0.1.0> Compiling getrandom v0.4.3 tincd-clippy-0.1.0> Checking bitflags v2.13.2 tincd-clippy-0.1.0> Compiling quote v1.0.45 tincd-clippy-0.1.0> Compiling typenum v1.19.0 tincd-clippy-0.1.0> Compiling num-traits v0.2.19 tincd-clippy-0.1.0> Compiling thiserror v2.0.21 tincd-clippy-0.1.0> Checking tinc-proto v0.0.0 (/build/source/crates/tinc-proto) tincd-clippy-0.1.0> Compiling rustix v1.1.4 tincd-clippy-0.1.0> Checking linux-raw-sys v0.12.1 tincd-clippy-0.1.0> Checking once_cell v1.21.4 tincd-clippy-0.1.0> Checking fastrand v2.4.0 tincd-clippy-0.1.0> Compiling zmij v1.0.21 tincd-clippy-0.1.0> Compiling serde_json v1.0.154 tincd-clippy-0.1.0> Compiling zerocopy v0.8.63 tincd-clippy-0.1.0> Checking wait-timeout v0.2.1 tincd-clippy-0.1.0> Checking fnv v1.0.7 tincd-clippy-0.1.0> Checking quick-error v1.2.3 tincd-clippy-0.1.0> Checking bit-vec v0.10.1 tincd-clippy-0.1.0> Checking rand_xorshift v0.5.0 tincd-clippy-0.1.0> Checking core_detect v1.0.0 tincd-clippy-0.1.0> Checking regex-syntax v0.8.11 tincd-clippy-0.1.0> Checking unarray v0.1.4 tincd-clippy-0.1.0> Checking arbitrary v1.5.0 tincd-clippy-0.1.0> Checking hex v0.4.3 tincd-clippy-0.1.0> Checking nix v0.31.3 tincd-clippy-0.1.0> Checking bit-set v0.11.1 tincd-clippy-0.1.0> Checking rand v0.10.3 tincd-clippy-0.1.0> Compiling syn v2.0.117 tincd-clippy-0.1.0> Compiling syn v3.0.5 tincd-clippy-0.1.0> Compiling jobserver v0.1.35 tincd-clippy-0.1.0> Compiling cc v1.8.0 tincd-clippy-0.1.0> Checking tempfile v3.27.0 tincd-clippy-0.1.0> Compiling thiserror-impl v2.0.21 tincd-clippy-0.1.0> Compiling serde_derive v1.0.229 tincd-clippy-0.1.0> Checking rusty-fork v0.3.1 tincd-clippy-0.1.0> Compiling openssl-sys v0.9.117 tincd-clippy-0.1.0> Compiling tincd v0.1.0 (/build/source/crates/tincd) tincd-clippy-0.1.0> Compiling libfuzzer-sys v0.4.13 tincd-clippy-0.1.0> Compiling tinc-ffi v0.0.0 (/build/source/crates/tinc-ffi) tincd-clippy-0.1.0> Compiling zeroize_derive v1.5.0 tincd-clippy-0.1.0> Compiling curve25519-dalek-derive v0.1.1 tincd-clippy-0.1.0> Compiling zerocopy-derive v0.8.63 tincd-clippy-0.1.0> Compiling enumflags2_derive v0.7.12 tincd-clippy-0.1.0> Checking tinc-device v0.0.0 (/build/source/crates/tinc-device) tincd-clippy-0.1.0> Checking serde v1.0.229 tincd-clippy-0.1.0> Checking enumflags2 v0.7.12 tincd-clippy-0.1.0> Checking landlock v0.4.7 tincd-clippy-0.1.0> Checking zeroize v1.9.1 tincd-clippy-0.1.0> Checking hybrid-array v0.4.10 tincd-clippy-0.1.0> Checking der v0.8.2 tincd-clippy-0.1.0> Checking crypto-bigint v0.7.5 tincd-clippy-0.1.0> Checking crypto-common v0.2.2 tincd-clippy-0.1.0> Checking block-buffer v0.12.0 tincd-clippy-0.1.0> Checking module-lattice v0.2.3 tincd-clippy-0.1.0> Checking inout v0.2.2 tincd-clippy-0.1.0> Checking spki v0.8.1 tincd-clippy-0.1.0> Checking pkcs1 v0.8.0-rc.5 tincd-clippy-0.1.0> Checking pkcs8 v0.11.0 tincd-clippy-0.1.0> Checking digest v0.11.2 tincd-clippy-0.1.0> Checking kem v0.3.0 tincd-clippy-0.1.0> Checking cipher v0.5.2 tincd-clippy-0.1.0> Checking signature v3.0.0 tincd-clippy-0.1.0> Checking sha2 v0.11.1 tincd-clippy-0.1.0> Checking sha3 v0.11.0 tincd-clippy-0.1.0> Checking curve25519-dalek v5.0.0-pre.6 tincd-clippy-0.1.0> Checking hmac v0.13.0 tincd-clippy-0.1.0> Checking shake v0.1.0 tincd-clippy-0.1.0> Checking ed25519 v3.0.0-rc.4 tincd-clippy-0.1.0> Checking chacha20 v0.10.2 tincd-clippy-0.1.0> Checking crypto-primes v0.7.2 tincd-clippy-0.1.0> Checking ml-kem v0.3.2 tincd-clippy-0.1.0> Checking proptest v1.12.0 tincd-clippy-0.1.0> Checking ed25519-dalek v3.0.0-pre.6 tincd-clippy-0.1.0> Checking tinc-crypto v0.0.0 (/build/source/crates/tinc-crypto) tincd-clippy-0.1.0> Checking rsa v0.10.0-rc.19 tincd-clippy-0.1.0> Checking tinc-sptps v0.0.0 (/build/source/crates/tinc-sptps) tincd-clippy-0.1.0> Checking tinc-conf v0.0.0 (/build/source/crates/tinc-conf) tincd-clippy-0.1.0> Checking tinc-tools v0.0.0 (/build/source/crates/tinc-tools) tincd-clippy-0.1.0> Checking netlink-packet-route v0.33.0 tincd-clippy-0.1.0> Checking ppv-lite86 v0.2.21 tincd-clippy-0.1.0> Checking rand_chacha v0.10.0 tincd-clippy-0.1.0> Checking netdev v0.46.3 tincd-clippy-0.1.0> Checking tincr-fuzz v0.0.0 (/build/source/fuzz) tincd-clippy-0.1.0> Finished `release` profile [optimized] target(s) in 43.68s tincd-clippy-0.1.0> buildPhase completed in 43 seconds tincd-clippy-0.1.0> Running phase: installPhase tincd-clippy-0.1.0> linking previous artifacts /nix/store/jmzq1qcm3056nsnwkd1b9qhysbdkbfyk-tincd-deps-0.1.0/target.tar.zst to /nix/store/w096ijl528x85fzm9fqhg3qvkngx1p62-tincd-clippy-0.1.0/target.tar.zst tincd-clippy-0.1.0> /*stdin*\ : 27.96% ( 150 MiB => 42.1 MiB, /nix/store/w096ijl528x85fzm9fqhg3qvkngx1p62-tincd-clippy-0.1.0/target.tar.zst) tincd-clippy-0.1.0> Running phase: fixupPhase tincd-clippy-0.1.0> shrinking RPATHs of ELF executables and libraries in /nix/store/w096ijl528x85fzm9fqhg3qvkngx1p62-tincd-clippy-0.1.0 tincd-clippy-0.1.0> checking for references to /build/ in /nix/store/w096ijl528x85fzm9fqhg3qvkngx1p62-tincd-clippy-0.1.0... tincd-clippy-0.1.0> patching script interpreter paths in /nix/store/w096ijl528x85fzm9fqhg3qvkngx1p62-tincd-clippy-0.1.0 post-build step Upload coverage to codecov: ok Skipping codecov: project=Mic92/tincr attr=checks.x86_64-linux.clippy