these 13 derivations will be built:
  /nix/store/1z3cgmyv52vkvqv6xs3hijdjzcjq2q7k-Cargo.toml.drv
  /nix/store/26b0m67c06zi9yxm0fvh97vzz79hi810-Cargo.toml.drv
  /nix/store/3y0c9735wwv4mm4zr0fl1b7vhzazrz50-Cargo.toml.drv
  /nix/store/b7cj8hsir9j9qdpa61afnnwy8yw81zxl-Cargo.toml.drv
  /nix/store/bgc1jf4g3gabrkgzlpkhaqw4rd1p1pl9-Cargo.toml.drv
  /nix/store/cpb0slggnnssimgaw486vzcpn8kqw0xz-Cargo.toml.drv
  /nix/store/hmf9wjhpwmr1fqfjydd8zvih10pri1z7-Cargo.toml.drv
  /nix/store/iqv5p9ilis0c248krcbmygxzc8g99mmg-Cargo.toml.drv
  /nix/store/rczzhfxjjbzcn2qp7sf0jrqym1ccckjy-Cargo.toml.drv
  /nix/store/v9fmaa1fzi0lj0z6xbgn96g5r21mnvgg-Cargo.toml.drv
  /nix/store/7aj3cfv7yaxrpjzpvcvmrv64455qiy1l-source.drv
  /nix/store/qmfxkrx9lrqra247xz0r7b7x322fs6qh-tincd-deps-0.1.0.drv
  /nix/store/gh6zdxi2yic8s0y4a14a15zcqjafgmir-tincd-clippy-0.1.0.drv
building '/nix/store/1z3cgmyv52vkvqv6xs3hijdjzcjq2q7k-Cargo.toml.drv'
Cargo.toml> tribuchet: building on mac02
building '/nix/store/gh6zdxi2yic8s0y4a14a15zcqjafgmir-tincd-clippy-0.1.0.drv'
tincd-clippy-0.1.0> tribuchet: building on mac02
tincd-clippy-0.1.0> Running phase: unpackPhase
tincd-clippy-0.1.0> unpacking source archive /nix/store/niwfqpjpv8vzys71agz3wl4bhj2p84nc-source
tincd-clippy-0.1.0> source root is source
tincd-clippy-0.1.0> Running phase: patchPhase
tincd-clippy-0.1.0> Executing configureCargoCommonVars
tincd-clippy-0.1.0> decompressing cargo artifacts from /nix/store/6axym4vwb61a8vdnxnvymbb8lb5m9305-tincd-deps-0.1.0/target.tar.zst to target
tincd-clippy-0.1.0> Running phase: updateAutotoolsGnuConfigScriptsPhase
tincd-clippy-0.1.0> Running phase: configurePhase
tincd-clippy-0.1.0> will append /private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/.cargo-home/config.toml with contents of /nix/store/sw5pdcxh2yp6jvl46x9jpprw5dsma4mx-vendor-cargo-deps/config.toml
tincd-clippy-0.1.0> default configurePhase, nothing to do
tincd-clippy-0.1.0> Running phase: buildPhase
tincd-clippy-0.1.0> +++ command cargo --version
tincd-clippy-0.1.0> cargo 1.99.0 (5f94df478 2026-08-27)
tincd-clippy-0.1.0> +++ command cargo clippy --release --workspace --all-targets -- -D warnings
tincd-clippy-0.1.0>    Compiling libc v0.2.190
tincd-clippy-0.1.0>    Compiling getrandom v0.4.3
tincd-clippy-0.1.0>    Compiling num-traits v0.2.19
tincd-clippy-0.1.0>     Checking tinc-proto v0.0.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tinc-proto)
tincd-clippy-0.1.0>    Compiling rustix v1.1.4
tincd-clippy-0.1.0>     Checking once_cell v1.21.4
tincd-clippy-0.1.0>     Checking fastrand v2.4.0
tincd-clippy-0.1.0>    Compiling zerocopy v0.8.63
tincd-clippy-0.1.0>     Checking errno v0.3.14
tincd-clippy-0.1.0>     Checking tinc-device v0.0.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tinc-device)
tincd-clippy-0.1.0>     Checking wait-timeout v0.2.1
tincd-clippy-0.1.0>     Checking quick-error v1.2.3
tincd-clippy-0.1.0>     Checking inout v0.2.2
tincd-clippy-0.1.0>     Checking fnv v1.0.7
tincd-clippy-0.1.0>     Checking bit-vec v0.10.1
tincd-clippy-0.1.0>     Checking rand_xorshift v0.5.0
tincd-clippy-0.1.0>     Checking unarray v0.1.4
tincd-clippy-0.1.0>     Checking core_detect v1.0.0
tincd-clippy-0.1.0>     Checking regex-syntax v0.8.11
tincd-clippy-0.1.0>     Checking arbitrary v1.5.0
tincd-clippy-0.1.0>     Checking hex v0.4.3
tincd-clippy-0.1.0>     Checking cipher v0.5.2
tincd-clippy-0.1.0>     Checking rand v0.10.3
tincd-clippy-0.1.0>     Checking bit-set v0.11.1
tincd-clippy-0.1.0>     Checking chacha20 v0.10.2
tincd-clippy-0.1.0>     Checking module-lattice v0.2.3
tincd-clippy-0.1.0>     Checking crypto-bigint v0.7.5
tincd-clippy-0.1.0>     Checking ml-kem v0.3.2
tincd-clippy-0.1.0>    Compiling jobserver v0.1.35
tincd-clippy-0.1.0>    Compiling cc v1.8.0
tincd-clippy-0.1.0>     Checking tempfile v3.27.0
tincd-clippy-0.1.0>     Checking rusty-fork v0.3.1
tincd-clippy-0.1.0>     Checking proptest v1.12.0
tincd-clippy-0.1.0>     Checking crypto-primes v0.7.2
tincd-clippy-0.1.0>    Compiling openssl-sys v0.9.117
tincd-clippy-0.1.0>    Compiling tincd v0.1.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tincd)
tincd-clippy-0.1.0>    Compiling libfuzzer-sys v0.4.13
tincd-clippy-0.1.0>    Compiling tinc-ffi v0.0.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tinc-ffi)
tincd-clippy-0.1.0>     Checking ppv-lite86 v0.2.21
tincd-clippy-0.1.0>     Checking rand_chacha v0.10.0
tincd-clippy-0.1.0>     Checking rsa v0.10.0-rc.19
tincd-clippy-0.1.0> warning: tincd@0.1.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0> warning: tinc-ffi@0.0.0: Warning: supplying the --target arm64-apple-macosx != arm64-apple-darwin argument to a nix-wrapped compiler may not work correctly - cc-wrapper is currently not designed with multi-target compilers in mind. You may want to use an un-wrapped compiler instead.
tincd-clippy-0.1.0>     Checking tinc-crypto v0.0.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tinc-crypto)
tincd-clippy-0.1.0>     Checking tinc-sptps v0.0.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tinc-sptps)
tincd-clippy-0.1.0>     Checking tinc-conf v0.0.0 (/private/var/tb/2/scratch/e4ee900aab0ea2c8/build/source/crates/tinc-conf)
tincd-clippy-0.1.0> error: used `assert!` to check that a value is empty
tincd-clippy-0.1.0>    --> crates/tinc-crypto/src/aead.rs:439:9
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 439 |         assert!(SptpsAead::default().label_suffix().is_empty());
tincd-clippy-0.1.0>     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0>     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assert_is_empty
tincd-clippy-0.1.0>     = note: `-D clippy::assert-is-empty` implied by `-D warnings`
tincd-clippy-0.1.0>     = help: to override `-D warnings` add `#[allow(clippy::assert_is_empty)]`
tincd-clippy-0.1.0> help: use `assert_eq!` to show the value on failure
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 439 -         assert!(SptpsAead::default().label_suffix().is_empty());
tincd-clippy-0.1.0> 439 +         assert_eq!(SptpsAead::default().label_suffix(), []);
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 
tincd-clippy-0.1.0> error: could not compile `tinc-crypto` (lib test) due to 1 previous error
tincd-clippy-0.1.0> warning: build failed, waiting for other jobs to finish...
tincd-clippy-0.1.0> error: used `assert!` to check that a value is empty
tincd-clippy-0.1.0>    --> crates/tinc-conf/src/hostdirs.rs:218:9
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 218 |         assert!(d.names().unwrap().is_empty());
tincd-clippy-0.1.0>     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0>     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assert_is_empty
tincd-clippy-0.1.0>     = note: `-D clippy::assert-is-empty` implied by `-D warnings`
tincd-clippy-0.1.0>     = help: to override `-D warnings` add `#[allow(clippy::assert_is_empty)]`
tincd-clippy-0.1.0> help: use `assert_eq!` to show the value on failure
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 218 -         assert!(d.names().unwrap().is_empty());
tincd-clippy-0.1.0> 218 +         assert_eq!(d.names().unwrap(), [] as [std::string::String; 0]);
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 
tincd-clippy-0.1.0> error: used `assert!` to check that a value is empty
tincd-clippy-0.1.0>    --> crates/tinc-conf/src/hostdirs.rs:247:9
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 247 |         assert!(d.overridden().is_empty());
tincd-clippy-0.1.0>     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0>     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assert_is_empty
tincd-clippy-0.1.0> help: use `assert_eq!` to show the value on failure
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 247 -         assert!(d.overridden().is_empty());
tincd-clippy-0.1.0> 247 +         assert_eq!(d.overridden(), [] as [std::string::String; 0]);
tincd-clippy-0.1.0>     |
tincd-clippy-0.1.0> 
tincd-clippy-0.1.0> error: could not compile `tinc-conf` (lib test) due to 2 previous errors
error: Cannot build '/nix/store/gh6zdxi2yic8s0y4a14a15zcqjafgmir-tincd-clippy-0.1.0.drv'.
       Reason: builder failed with exit code 101.
       Output paths:
         /nix/store/7pwv0q13k650r22x976wzbpvs8yjsnv8-tincd-clippy-0.1.0
       Last 25 log lines:
       >     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       >     |
       >     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assert_is_empty
       >     = note: `-D clippy::assert-is-empty` implied by `-D warnings`
       >     = help: to override `-D warnings` add `#[allow(clippy::assert_is_empty)]`
       > help: use `assert_eq!` to show the value on failure
       >     |
       > 218 -         assert!(d.names().unwrap().is_empty());
       > 218 +         assert_eq!(d.names().unwrap(), [] as [std::string::String; 0]);
       >     |
       >
       > error: used `assert!` to check that a value is empty
       >    --> crates/tinc-conf/src/hostdirs.rs:247:9
       >     |
       > 247 |         assert!(d.overridden().is_empty());
       >     |         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
       >     |
       >     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assert_is_empty
       > help: use `assert_eq!` to show the value on failure
       >     |
       > 247 -         assert!(d.overridden().is_empty());
       > 247 +         assert_eq!(d.overridden(), [] as [std::string::String; 0]);
       >     |
       >
       > error: could not compile `tinc-conf` (lib test) due to 2 previous errors
       For full logs, run:
         nix log /nix/store/gh6zdxi2yic8s0y4a14a15zcqjafgmir-tincd-clippy-0.1.0.drv