these 7 derivations will be built:
  /nix/store/46kgfl9avc5hc6v3vn43w3yxymwi72ds-source.drv
  /nix/store/7hv80w1pj8bk0r8mlqnvf83g09rfqhp8-cargo-package-zerocopy-0.8.56.drv
  /nix/store/mznrmkcqmkplh4kp2bxr8givp6jiwllc-cargo-package-zerocopy-derive-0.8.56.drv
  /nix/store/rz1p93ynsjw5r3k36zs4j8jplp3xvsba-vendor-registry.drv
  /nix/store/9rvw7r0rbdgf3y673b00sba3caf90l0f-vendor-cargo-deps.drv
  /nix/store/hldmqd6wpgs0vf0xa28b7bd6q7kn0wwa-tincd-deps-0.1.0.drv
  /nix/store/xf1dwgq276mzsyqpc7m5wq880d9pkyyb-tincd-clippy-0.1.0.drv
building '/nix/store/mznrmkcqmkplh4kp2bxr8givp6jiwllc-cargo-package-zerocopy-derive-0.8.56.drv'
building '/nix/store/46kgfl9avc5hc6v3vn43w3yxymwi72ds-source.drv'
cargo-package-zerocopy-derive-0.8.56> Running phase: unpackPhase
cargo-package-zerocopy-derive-0.8.56> setting SOURCE_DATE_EPOCH to timestamp 1153704088 of file "./crate/tests/unsafe_cell.rs"
cargo-package-zerocopy-derive-0.8.56> Running phase: patchPhase
cargo-package-zerocopy-derive-0.8.56> Running phase: updateAutotoolsGnuConfigScriptsPhase
cargo-package-zerocopy-derive-0.8.56> Running phase: installPhase
building '/nix/store/xf1dwgq276mzsyqpc7m5wq880d9pkyyb-tincd-clippy-0.1.0.drv'
tincd-clippy-0.1.0> Running phase: unpackPhase
tincd-clippy-0.1.0> unpacking source archive /nix/store/xz95hh2012rm22cw5hshmbbn6kmvcqbs-source
tincd-clippy-0.1.0> source root is source
tincd-clippy-0.1.0> Running phase: patchPhase
tincd-clippy-0.1.0> Executing configureCargoCommonVars
tincd-clippy-0.1.0> decompressing cargo artifacts from /nix/store/aj529gndycz9rmba3346022q72cq338y-tincd-deps-0.1.0/target.tar.zst to target
tincd-clippy-0.1.0> Running phase: updateAutotoolsGnuConfigScriptsPhase
tincd-clippy-0.1.0> Running phase: configurePhase
tincd-clippy-0.1.0> will append /build/source/.cargo-home/config.toml with contents of /nix/store/9ms8sblkvqvhnr1c1x2lc81rqz6ygnk2-vendor-cargo-deps/config.toml
tincd-clippy-0.1.0> default configurePhase, nothing to do
tincd-clippy-0.1.0> Running phase: buildPhase
tincd-clippy-0.1.0> +++ command cargo --version
tincd-clippy-0.1.0> cargo 1.97.0 (c980f4866 2026-06-30)
tincd-clippy-0.1.0> +++ command cargo clippy --release --workspace --all-targets -- -D warnings
tincd-clippy-0.1.0>     Checking bitflags v2.11.0
tincd-clippy-0.1.0>    Compiling rustix v1.1.4
tincd-clippy-0.1.0>     Checking linux-raw-sys v0.12.1
tincd-clippy-0.1.0>    Compiling num-traits v0.2.19
tincd-clippy-0.1.0>     Checking fastrand v2.4.0
tincd-clippy-0.1.0>     Checking once_cell v1.21.4
tincd-clippy-0.1.0>     Checking tinc-proto v0.0.0 (/build/source/crates/tinc-proto)
tincd-clippy-0.1.0>    Compiling zerocopy v0.8.56
tincd-clippy-0.1.0>    Compiling tincd v0.1.0 (/build/source/crates/tincd)
tincd-clippy-0.1.0>    Compiling getrandom v0.3.4
tincd-clippy-0.1.0>     Checking wait-timeout v0.2.1
tincd-clippy-0.1.0>     Checking quick-error v1.2.3
tincd-clippy-0.1.0>     Checking fnv v1.0.7
tincd-clippy-0.1.0>     Checking bit-vec v0.8.0
tincd-clippy-0.1.0>    Compiling generic-array v0.14.7
tincd-clippy-0.1.0>     Checking regex-syntax v0.8.11
tincd-clippy-0.1.0>     Checking unarray v0.1.4
tincd-clippy-0.1.0>    Compiling tinc-ffi v0.0.0 (/build/source/crates/tinc-ffi)
tincd-clippy-0.1.0>     Checking hex v0.4.3
tincd-clippy-0.1.0>     Checking bit-set v0.8.0
tincd-clippy-0.1.0>     Checking nix v0.31.3
tincd-clippy-0.1.0>     Checking netlink-packet-route v0.31.0
tincd-clippy-0.1.0>     Checking rand_core v0.9.5
tincd-clippy-0.1.0>     Checking rand v0.9.2
tincd-clippy-0.1.0>     Checking rand_xorshift v0.4.0
tincd-clippy-0.1.0>     Checking inout v0.1.4
tincd-clippy-0.1.0>     Checking crypto-common v0.1.7
tincd-clippy-0.1.0>     Checking module-lattice v0.2.3
tincd-clippy-0.1.0>     Checking crypto-bigint v0.7.5
tincd-clippy-0.1.0>     Checking cipher v0.4.4
tincd-clippy-0.1.0>     Checking tempfile v3.27.0
tincd-clippy-0.1.0>     Checking ml-kem v0.3.2
tincd-clippy-0.1.0>     Checking chacha20 v0.9.1
tincd-clippy-0.1.0>     Checking rusty-fork v0.3.1
tincd-clippy-0.1.0>     Checking tinc-device v0.0.0 (/build/source/crates/tinc-device)
tincd-clippy-0.1.0>     Checking tinc-crypto v0.0.0 (/build/source/crates/tinc-crypto)
tincd-clippy-0.1.0>     Checking tinc-sptps v0.0.0 (/build/source/crates/tinc-sptps)
tincd-clippy-0.1.0>     Checking tinc-conf v0.0.0 (/build/source/crates/tinc-conf)
tincd-clippy-0.1.0>     Checking crypto-primes v0.7.2
tincd-clippy-0.1.0>     Checking ppv-lite86 v0.2.21
tincd-clippy-0.1.0>     Checking rand_chacha v0.10.0
tincd-clippy-0.1.0>     Checking rand_chacha v0.9.0
tincd-clippy-0.1.0>     Checking proptest v1.11.0
tincd-clippy-0.1.0>     Checking netdev v0.46.1
tincd-clippy-0.1.0>     Checking rsa v0.10.0-rc.18
tincd-clippy-0.1.0>     Checking tinc-tools v0.0.0 (/build/source/crates/tinc-tools)
tincd-clippy-0.1.0>     Finished `release` profile [optimized] target(s) in 1m 15s
tincd-clippy-0.1.0> buildPhase completed in 1 minutes 17 seconds
tincd-clippy-0.1.0> Running phase: installPhase
tincd-clippy-0.1.0> linking previous artifacts /nix/store/aj529gndycz9rmba3346022q72cq338y-tincd-deps-0.1.0/target.tar.zst to /nix/store/yzw0cdlavhj413lsc68h9cp3gbfa1l97-tincd-clippy-0.1.0/target.tar.zst
tincd-clippy-0.1.0> /*stdin*\            : 30.37%   (  55.5 MiB =>   16.8 MiB, /nix/store/yzw0cdlavhj413lsc68h9cp3gbfa1l97-tincd-clippy-0.1.0/target.tar.zst) 
tincd-clippy-0.1.0> Running phase: fixupPhase
tincd-clippy-0.1.0> shrinking RPATHs of ELF executables and libraries in /nix/store/yzw0cdlavhj413lsc68h9cp3gbfa1l97-tincd-clippy-0.1.0
tincd-clippy-0.1.0> checking for references to /build/ in /nix/store/yzw0cdlavhj413lsc68h9cp3gbfa1l97-tincd-clippy-0.1.0...
tincd-clippy-0.1.0> patching script interpreter paths in /nix/store/yzw0cdlavhj413lsc68h9cp3gbfa1l97-tincd-clippy-0.1.0

post-build step Upload coverage to codecov: ok
Skipping codecov: project=Mic92/tincr attr=checks.x86_64-linux.clippy