Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot: QEMU running (pid 12) buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot # Formatting '/build/vm-state-buildbot/tmp.0XCUGondoX', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: df2bdbb3-0077-4930-b1ca-cd208a36da04 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) buildbot # buildbot # buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA00 buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)... buildbot # buildbot # buildbot # buildbot # buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB00 buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)... buildbot # buildbot # buildbot # Booting from ROM... buildbot # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/agxb7rg4vhbayg8vbb208g65bd4qh0mg-nixos-system-buildbot-test/init regInfo=/nix/store/7r0hkd0yq1dfhq46sinf62aq1lfffacq-closure-info/registration console=ttyS0,115200n8 console=tty0 buildbot # [ 0.000000] BIOS-provided physical RAM map: buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved buildbot # [ 0.000000] NX (Execute Disable) protection: active buildbot # [ 0.000000] APIC: Static calls initialized buildbot # [ 0.000000] SMBIOS 2.8 present. buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 buildbot # [ 0.000000] DMI: Memory slots populated: 1/1 buildbot # [ 0.000000] Hypervisor detected: KVM buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x10000000000 buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 buildbot # [ 0.000001] kvm-clock: using sched offset of 545251771 cycles buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000005] tsc: Detected 2400.010 MHz processor buildbot # [ 0.000811] last_pfn = 0x3ffdb max_arch_pfn = 0x10000000000 buildbot # [ 0.000848] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs buildbot # [ 0.000850] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT buildbot # [ 0.002748] found SMP MP-table at [mem 0x000f5470-0x000f547f] buildbot # [ 0.002759] Using GB pages for direct mapping buildbot # [ 0.002846] RAMDISK: [mem 0x3e4ba000-0x3ffcffff] buildbot # [ 0.002854] ACPI: Early table checksum verification disabled buildbot # [ 0.002857] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) buildbot # [ 0.002861] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002865] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002872] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002874] ACPI: FACS 0x000000003FFE0000 000040 buildbot # [ 0.002876] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002878] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002879] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002880] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3] buildbot # [ 0.002881] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f] buildbot # [ 0.002882] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] buildbot # [ 0.002883] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b] buildbot # [ 0.002883] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3] buildbot # [ 0.002884] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb] buildbot # [ 0.003365] No NUMA configuration found buildbot # [ 0.003367] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff] buildbot # [ 0.003370] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff] buildbot # [ 0.005715] Zone ranges: buildbot # [ 0.005716] DMA [mem 0x0000000000001000-0x0000000000ffffff] buildbot # [ 0.005717] DMA32 [mem 0x0000000001000000-0x000000003ffdafff] buildbot # [ 0.005719] Normal empty buildbot # [ 0.005720] Device empty buildbot # [ 0.005720] Movable zone start for each node buildbot # [ 0.005721] Early memory node ranges buildbot # [ 0.005721] node 0: [mem 0x0000000000001000-0x000000000009efff] buildbot # [ 0.005722] node 0: [mem 0x0000000000100000-0x000000003ffdafff] buildbot # [ 0.005723] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff] buildbot # [ 0.005804] On node 0, zone DMA: 1 pages in unavailable ranges buildbot # [ 0.006076] On node 0, zone DMA: 97 pages in unavailable ranges buildbot # [ 0.024171] On node 0, zone DMA32: 37 pages in unavailable ranges buildbot # [ 0.025163] ACPI: PM-Timer IO Port: 0x608 buildbot # [ 0.025176] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) buildbot # [ 0.025208] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 buildbot # [ 0.025210] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) buildbot # [ 0.025212] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) buildbot # [ 0.025213] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) buildbot # [ 0.025214] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) buildbot # [ 0.025214] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) buildbot # [ 0.025217] ACPI: Using ACPI (MADT) for SMP configuration information buildbot # [ 0.025218] ACPI: HPET id: 0x8086a201 base: 0xfed00000 buildbot # [ 0.025223] TSC deadline timer available buildbot # [ 0.025227] CPU topo: Max. logical packages: 1 buildbot # [ 0.025228] CPU topo: Max. logical dies: 1 buildbot # [ 0.025228] CPU topo: Max. dies per package: 1 buildbot # [ 0.025232] CPU topo: Max. threads per core: 1 buildbot # [ 0.025232] CPU topo: Num. cores per package: 1 buildbot # [ 0.025233] CPU topo: Num. threads per package: 1 buildbot # [ 0.025233] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs buildbot # [ 0.025251] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() buildbot # [ 0.025285] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] buildbot # [ 0.025287] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] buildbot # [ 0.025288] [mem 0x40000000-0xfeffbfff] available for PCI devices buildbot # [ 0.025289] Booting paravirtualized kernel on KVM buildbot # [ 0.025292] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns buildbot # [ 0.029726] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 buildbot # [ 0.032148] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 buildbot # [ 0.032195] kvm-guest: PV spinlocks disabled, single CPU buildbot # [ 0.032196] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/agxb7rg4vhbayg8vbb208g65bd4qh0mg-nixos-system-buildbot-test/init regInfo=/nix/store/7r0hkd0yq1dfhq46sinf62aq1lfffacq-closure-info/registration console=ttyS0,115200n8 console=tty0 buildbot # [ 0.032287] Unknown kernel command line parameters "regInfo=/nix/store/7r0hkd0yq1dfhq46sinf62aq1lfffacq-closure-info/registration", will be passed to user space. buildbot # [ 0.032299] random: crng init done buildbot # [ 0.032300] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes buildbot # [ 0.032320] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.032880] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.032912] Fallback order for Node 0: 0 buildbot # [ 0.032915] Built 1 zonelists, mobility grouping on. Total pages: 262009 buildbot # [ 0.032916] Policy zone: DMA32 buildbot # [ 0.035142] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.037464] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.039770] allocated 2097152 bytes of page_ext buildbot # [ 0.049343] ftrace: allocating 48598 entries in 192 pages buildbot # [ 0.049345] ftrace: allocated 192 pages with 2 groups buildbot # [ 0.050206] Dynamic Preempt: lazy buildbot # [ 0.050336] rcu: Preemptible hierarchical RCU implementation. buildbot # [ 0.050336] rcu: RCU event tracing is enabled. buildbot # [ 0.050337] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.050338] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.050339] Rude variant of Tasks RCU enabled. buildbot # [ 0.050339] Tracing variant of Tasks RCU enabled. buildbot # [ 0.050340] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. buildbot # [ 0.050341] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.050392] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.050393] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.050394] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.054905] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 buildbot # [ 0.055187] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.055290] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.062551] Console: colour VGA+ 80x25 buildbot # [ 0.062555] printk: legacy console [tty0] enabled buildbot # [ 0.103305] printk: legacy console [ttyS0] enabled buildbot # [ 0.291232] ACPI: Core revision 20250807 buildbot # [ 0.292794] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns buildbot # [ 0.295686] APIC: Switch to symmetric I/O mode setup buildbot # [ 0.297424] x2apic enabled buildbot # [ 0.298655] APIC: Switched APIC routing to: physical x2apic buildbot # [ 0.301514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 buildbot # [ 0.303345] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns buildbot # [ 0.306414] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400010) buildbot # [ 0.308531] x86/cpu: User Mode Instruction Prevention (UMIP) activated buildbot # [ 0.309582] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 buildbot # [ 0.310413] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 buildbot # [ 0.311417] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto buildbot # [ 0.312413] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl buildbot # [ 0.313413] Transient Scheduler Attacks: Mitigation: Clear CPU buffers buildbot # [ 0.315412] Spectre V2 : Mitigation: Enhanced / Automatic IBRS buildbot # [ 0.317412] Speculative Return Stack Overflow: Mitigation: Safe RET buildbot # [ 0.319412] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization buildbot # [ 0.321419] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier buildbot # [ 0.322413] active return thunk: srso_alias_return_thunk buildbot # [ 0.324440] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' buildbot # [ 0.325412] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' buildbot # [ 0.327412] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' buildbot # [ 0.329413] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' buildbot # [ 0.330412] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' buildbot # [ 0.331412] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' buildbot # [ 0.332412] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' buildbot # [ 0.333412] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' buildbot # [ 0.335412] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' buildbot # [ 0.337413] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 buildbot # [ 0.338412] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 buildbot # [ 0.339413] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 buildbot # [ 0.340412] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 buildbot # [ 0.341412] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 buildbot # [ 0.343412] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 buildbot # [ 0.345412] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 buildbot # [ 0.346412] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. buildbot # [ 0.382040] Freeing SMP alternatives memory: 44K buildbot # [ 0.382415] pid_max: default: 32768 minimum: 301 buildbot # [ 0.383539] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.385528] landlock: Up and running. buildbot # [ 0.386412] Yama: becoming mindful. buildbot # [ 0.388591] LSM support for eBPF active buildbot # [ 0.389501] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.390439] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.393506] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) buildbot # [ 0.395003] Performance Events: Fam17h+ core perfctr, AMD PMU driver. buildbot # [ 0.395422] ... version: 2 buildbot # [ 0.396414] ... bit width: 48 buildbot # [ 0.397414] ... generic counters: 6 buildbot # [ 0.398414] ... generic bitmap: 000000000000003f buildbot # [ 0.399414] ... fixed-purpose counters: 0 buildbot # [ 0.400414] ... fixed-purpose bitmap: 0000000000000000 buildbot # [ 0.401414] ... value mask: 0000ffffffffffff buildbot # [ 0.402414] ... max period: 00007fffffffffff buildbot # [ 0.403414] ... global_ctrl mask: 000000000000003f buildbot # [ 0.404518] signal: max sigframe size: 3376 buildbot # [ 0.405562] rcu: Hierarchical SRCU implementation. buildbot # [ 0.406418] rcu: Max phase no-delay instances is 400. buildbot # [ 0.412124] smp: Bringing up secondary CPUs ... buildbot # [ 0.412432] smp: Brought up 1 node, 1 CPU buildbot # [ 0.413417] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) buildbot # [ 0.414654] Memory: 942400K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved) buildbot # [ 0.415666] devtmpfs: initialized buildbot # [ 0.416562] x86/mm: Memory block size: 128MB buildbot # [ 0.418385] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns buildbot # [ 0.419446] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.420448] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.421534] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.422772] PM: RTC time: 06:00:09, date: 2026-07-05 buildbot # [ 0.426187] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.427793] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.428437] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.429569] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.431415] audit: initializing netlink subsys (disabled) buildbot # [ 0.432734] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.432736] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.433415] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.434418] audit: type=2000 audit(1783231208.852:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.436417] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.436419] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.437452] cpuidle: using governor menu buildbot # [ 0.440623] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 buildbot # [ 0.441753] PCI: Using configuration type 1 for base access buildbot # [ 0.442415] PCI: Using configuration type 1 for extended access buildbot # [ 0.443639] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. buildbot # [ 0.448676] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.449415] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.454414] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.455414] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.465799] ACPI: Added _OSI(Module Device) buildbot # [ 0.466415] ACPI: Added _OSI(Processor Device) buildbot # [ 0.471414] ACPI: Added _OSI(Processor Aggregator Device) buildbot # [ 0.476255] ACPI: 1 ACPI AML tables successfully acquired and loaded buildbot # [ 0.480222] ACPI: Interpreter enabled buildbot # [ 0.481341] ACPI: PM: (supports S0 S3 S4 S5) buildbot # [ 0.484414] ACPI: Using IOAPIC for interrupt routing buildbot # [ 0.485721] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug buildbot # [ 0.488413] PCI: Using E820 reservations for host bridge windows buildbot # [ 0.489566] ACPI: Enabled 2 GPEs in block 00 to 0F buildbot # [ 0.497463] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) buildbot # [ 0.498421] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] buildbot # [ 0.499875] acpiphp: Slot [3] registered buildbot # [ 0.500533] acpiphp: Slot [4] registered buildbot # [ 0.501465] acpiphp: Slot [5] registered buildbot # [ 0.502465] acpiphp: Slot [6] registered buildbot # [ 0.503455] acpiphp: Slot [7] registered buildbot # [ 0.504470] acpiphp: Slot [8] registered buildbot # [ 0.505466] acpiphp: Slot [9] registered buildbot # [ 0.506456] acpiphp: Slot [10] registered buildbot # [ 0.507466] acpiphp: Slot [11] registered buildbot # [ 0.508478] acpiphp: Slot [12] registered buildbot # [ 0.509457] acpiphp: Slot [13] registered buildbot # [ 0.510448] acpiphp: Slot [14] registered buildbot # [ 0.511457] acpiphp: Slot [15] registered buildbot # [ 0.512460] acpiphp: Slot [16] registered buildbot # [ 0.513448] acpiphp: Slot [17] registered buildbot # [ 0.514447] acpiphp: Slot [18] registered buildbot # [ 0.515462] acpiphp: Slot [19] registered buildbot # [ 0.516448] acpiphp: Slot [20] registered buildbot # [ 0.517447] acpiphp: Slot [21] registered buildbot # [ 0.518448] acpiphp: Slot [22] registered buildbot # [ 0.519465] acpiphp: Slot [23] registered buildbot # [ 0.520448] acpiphp: Slot [24] registered buildbot # [ 0.521448] acpiphp: Slot [25] registered buildbot # [ 0.522448] acpiphp: Slot [26] registered buildbot # [ 0.523464] acpiphp: Slot [27] registered buildbot # [ 0.524448] acpiphp: Slot [28] registered buildbot # [ 0.525447] acpiphp: Slot [29] registered buildbot # [ 0.526468] acpiphp: Slot [30] registered buildbot # [ 0.527483] acpiphp: Slot [31] registered buildbot # [ 0.528437] PCI host bridge to bus 0000:00 buildbot # [ 0.529421] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] buildbot # [ 0.530415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] buildbot # [ 0.531416] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] buildbot # [ 0.532415] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window] buildbot # [ 0.533415] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window] buildbot # [ 0.534416] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.535864] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.537344] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint buildbot # [ 0.539345] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint buildbot # [ 0.542213] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef] buildbot # [ 0.543530] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk buildbot # [ 0.544415] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk buildbot # [ 0.545415] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk buildbot # [ 0.546415] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk buildbot # [ 0.547745] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint buildbot # [ 0.549481] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f] buildbot # [ 0.551735] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint buildbot # [ 0.553390] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI buildbot # [ 0.554429] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB buildbot # [ 0.555831] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint buildbot # [ 0.558497] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] buildbot # [ 0.559445] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] buildbot # [ 0.560468] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref] buildbot # [ 0.561651] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] buildbot # [ 0.563595] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.566452] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] buildbot # [ 0.567439] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] buildbot # [ 0.568500] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] buildbot # [ 0.569430] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] buildbot # [ 0.572604] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.575452] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f] buildbot # [ 0.576430] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] buildbot # [ 0.577467] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] buildbot # [ 0.580505] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.583453] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf] buildbot # [ 0.584430] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] buildbot # [ 0.585504] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] buildbot # [ 0.588415] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.591431] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f] buildbot # [ 0.593446] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] buildbot # [ 0.594472] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] buildbot # [ 0.597672] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.600456] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f] buildbot # [ 0.601434] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] buildbot # [ 0.602476] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] buildbot # [ 0.606101] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.609455] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f] buildbot # [ 0.610432] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] buildbot # [ 0.611470] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] buildbot # [ 0.614479] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.617279] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf] buildbot # [ 0.618431] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] buildbot # [ 0.619468] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] buildbot # [ 0.620432] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref] buildbot # [ 0.623442] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.625484] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] buildbot # [ 0.626472] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] buildbot # [ 0.629480] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.632300] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff] buildbot # [ 0.633431] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] buildbot # [ 0.634471] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] buildbot # [ 0.637467] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.640202] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df] buildbot # [ 0.641432] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff] buildbot # [ 0.642478] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] buildbot # [ 0.650974] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 buildbot # [ 0.651632] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 buildbot # [ 0.652615] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 buildbot # [ 0.653609] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 buildbot # [ 0.654544] ACPI: PCI: Interrupt link LNKS configured for IRQ 9 buildbot # [ 0.656672] iommu: Default domain type: Translated buildbot # [ 0.657428] iommu: DMA domain TLB invalidation policy: lazy mode buildbot # [ 0.658739] ACPI: bus type USB registered buildbot # [ 0.659476] usbcore: registered new interface driver usbfs buildbot # [ 0.660453] usbcore: registered new interface driver hub buildbot # [ 0.661435] usbcore: registered new device driver usb buildbot # [ 0.663458] NetLabel: Initializing buildbot # [ 0.664415] NetLabel: domain hash size = 128 buildbot # [ 0.665415] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO buildbot # [ 0.666469] NetLabel: unlabeled traffic allowed by default buildbot # [ 0.667433] PCI: Using ACPI for IRQ routing buildbot # [ 0.669124] pci 0000:00:02.0: vgaarb: setting as boot VGA device buildbot # [ 0.669409] pci 0000:00:02.0: vgaarb: bridge control possible buildbot # [ 0.669409] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none buildbot # [ 0.669419] vgaarb: loaded buildbot # [ 0.670605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 buildbot # [ 0.671415] hpet0: 3 comparators, 64-bit 100.000000 MHz counter buildbot # [ 0.677513] clocksource: Switched to clocksource kvm-clock buildbot # [ 0.679898] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.683328] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.685636] pnp: PnP ACPI init buildbot # [ 0.687369] pnp: PnP ACPI: found 6 devices buildbot # [ 0.695617] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns buildbot # [ 0.698265] clocksource: Switched to clocksource acpi_pm buildbot # [ 0.700026] NET: Registered PF_INET protocol family buildbot # [ 0.701809] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.720915] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.723662] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.725981] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.728391] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.730609] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.732615] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.734926] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.737019] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.739297] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.741057] NET: Registered PF_XDP protocol family buildbot # [ 0.742646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] buildbot # [ 0.744527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] buildbot # [ 0.746407] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] buildbot # [ 0.748463] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window] buildbot # [ 0.750515] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window] buildbot # [ 0.752714] pci 0000:00:01.0: PIIX3: Enabling Passive Release buildbot # [ 0.754522] pci 0000:00:00.0: Limiting direct PCI/PCI transfers buildbot # [ 0.757902] ACPI: \_SB_.LNKD: Enabled at IRQ 11 buildbot # [ 0.761372] PCI: CLS 0 bytes, default 64 buildbot # [ 0.762926] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns buildbot # [ 0.766046] Trying to unpack rootfs image as initramfs... buildbot # [ 0.813725] Initialise system trusted keyrings buildbot # [ 0.817477] workingset: timestamp_bits=40 max_order=18 bucket_order=0 buildbot # [ 0.844773] Key type asymmetric registered buildbot # [ 0.846137] Asymmetric key parser 'x509' registered buildbot # [ 0.851329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) buildbot # [ 0.856327] io scheduler mq-deadline registered buildbot # [ 0.860263] io scheduler kyber registered buildbot # [ 0.863891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.868271] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A buildbot # [ 0.876455] Linux agpgart interface v0.103 buildbot # [ 0.877837] ACPI: bus type drm_connector registered buildbot # [ 0.883727] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.885689] usbserial: USB Serial support registered for generic buildbot # [ 0.890279] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. buildbot # [ 0.890279] Please enable it if your BIOS has the CPPC option. buildbot # [ 0.894337] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled buildbot # [ 0.903454] drop_monitor: Initializing network drop monitor service buildbot # [ 0.905552] NET: Registered PF_INET6 protocol family buildbot # [ 0.910747] Segment Routing with IPv6 buildbot # [ 0.915287] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.917041] IPI shorthand broadcast: enabled buildbot # [ 0.927925] sched_clock: Marking stable (683029759, 244216939)->(1126940925, -199694227) buildbot # [ 0.934503] registered taskstats version 1 buildbot # [ 0.936119] Loading compiled-in X.509 certificates buildbot # [ 0.958268] Demotion targets for Node 0: null buildbot # [ 0.962334] Key type .fscrypt registered buildbot # [ 0.963623] Key type fscrypt-provisioning registered buildbot # [ 0.967402] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.969133] ima: Allocated hash algorithm: sha1 buildbot # [ 0.973299] ima: No architecture policies found buildbot # [ 0.978265] PM: Magic number: 2:975:12 buildbot # [ 0.982596] RAS: Correctable Errors collector initialized. buildbot # [ 0.992194] clk: Disabling unused clocks buildbot # [ 0.995282] PM: genpd: Disabling unused power domains buildbot # [ 1.123645] Freeing initrd memory: 27736K buildbot # [ 1.127799] Freeing unused decrypted memory: 2028K buildbot # [ 1.131478] Freeing unused kernel image (initmem) memory: 3636K buildbot # [ 1.133408] Write protecting the kernel read-only data: 32768k buildbot # [ 1.136332] Freeing unused kernel image (text/rodata gap) memory: 1272K buildbot # [ 1.138848] Freeing unused kernel image (rodata/data gap) memory: 776K buildbot # [ 1.192076] x86/mm: Checked W+X mappings: passed, no W+X pages found. buildbot # [ 1.194122] Run /init as init process buildbot # [ 1.206395] systemd[1]: Inserted module 'autofs4' buildbot # [ 1.223943] fuse: init (API version 7.45) buildbot # [ 1.231726] ACPI: \_SB_.LNKC: Enabled at IRQ 10 buildbot # [ 1.241384] ACPI: \_SB_.LNKA: Enabled at IRQ 10 buildbot # [ 1.246140] ACPI: \_SB_.LNKB: Enabled at IRQ 11 buildbot # [ 1.288429] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.629039] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.650976] systemd[1]: Detected virtualization kvm. buildbot # [ 1.655028] systemd[1]: Detected architecture x86-64. buildbot # [ 1.659045] systemd[1]: Running in initrd. buildbot # [ 1.663615] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.668993] systemd[1]: Hostname set to . buildbot # [ 1.734888] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.740937] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.743100] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.745636] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.747675] systemd[1]: Reached target Path Units. buildbot # [ 1.749332] systemd[1]: Reached target Slice Units. buildbot # [ 1.750983] systemd[1]: Reached target Swaps. buildbot # [ 1.752516] systemd[1]: Reached target Timer Units. buildbot # [ 1.754343] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.756586] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.758686] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.760513] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.762459] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.764277] systemd[1]: Reached target Socket Units. buildbot # [ 1.767112] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.774358] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.782472] systemd[1]: Starting Load Kernel Module configfs... buildbot # [ 1.799347] systemd[1]: Starting Journal Service... buildbot # [ 1.817351] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.820999] netfs: FS-Cache loaded buildbot # [ 1.823809] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.843569] 9pnet: Installing 9P2000 support buildbot # [ 1.861567] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.872565] systemd-journald[67]: Collecting audit messages is disabled. buildbot # [ 1.881394] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.891145] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.905917] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.910893] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.916831] systemd[1]: modprobe@configfs.service: Deactivated successfully. buildbot # [ 1.926090] systemd[1]: Finished Load Kernel Module configfs. buildbot # [ 1.927949] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.936034] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config buildbot # [ 1.956530] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.977413] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.987996] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 2.013410] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 2.028370] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 2.047402] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 2.069321] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 2.075650] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 2.082374] systemd[1]: Reached target Local File Systems. buildbot # [ 2.091705] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.851852] systemd-modules-load[68]: Inserted module 'dm_mod' buildbot # [ 1.854415] systemd-modules-load[68]: Inserted module 'virtio_balloon' buildbot # [ 1.857498] systemd-modules-load[68]: Inserted module 'virtio_gpu' buildbot # [ 2.111590] systemd[1]: Started Journal Service. buildbot # [ 1.892344] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.920941] systemd-udevd[74]: Using default interface naming scheme 'v260'. buildbot # [ 1.930715] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.967156] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 2.054276] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.056850] systemd[1]: Reached target System Initialization. buildbot # [ 2.060120] systemd[1]: Reached target Basic System. buildbot # [ 2.577702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 buildbot # [ 2.601106] uhci_hcd 0000:00:01.2: UHCI Host Controller buildbot # [ 2.617147] serio: i8042 KBD port at 0x60,0x64 irq 1 buildbot # [ 2.627437] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 buildbot # [ 2.629271] uhci_hcd 0000:00:01.2: detected 2 ports buildbot # [ 2.632258] serio: i8042 AUX port at 0x60,0x64 irq 12 buildbot # [ 2.642849] SCSI subsystem initialized buildbot # [ 2.649935] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100 buildbot # [ 2.653455] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 2.666097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 buildbot # [ 2.686704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 buildbot # [ 2.697591] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 2.706273] usb usb1: Product: UHCI Host Controller buildbot # [ 2.716435] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd buildbot # [ 2.730510] usb usb1: SerialNumber: 0000:00:01.2 buildbot # [ 2.740722] hub 1-0:1.0: USB hub found buildbot # [ 2.750284] hub 1-0:1.0: 2 ports detected buildbot # [ 2.516780] systemd[1]: Starting Virtual Console Setup... buildbot # [ 2.540967] (udev-worker)[91]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.551249] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.555407] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.568494] systemd-vconsole-setup[98]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 2.578584] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.837310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 buildbot # [ 2.618713] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.620668] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.625085] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.878342] scsi host0: ata_piix buildbot # [ 2.885653] scsi host1: ata_piix buildbot # [ 2.886706] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0 buildbot # [ 2.894091] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0 buildbot # [ 2.663787] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.671886] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.677324] systemd[1]: Mounting /sysroot... buildbot # [ 2.988303] usb 1-1: new full-speed USB device number 2 using uhci_hcd buildbot # [ 3.052895] ata2: found unknown device (class 0) buildbot # [ 3.059710] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 buildbot # [ 3.068868] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 buildbot # [ 3.145501] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray buildbot # [ 3.160094] cdrom: Uniform CD-ROM driver Revision: 3.20 buildbot # [ 3.161719] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 buildbot # [ 3.165094] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 buildbot # [ 3.171260] usb 1-1: Product: QEMU USB Tablet buildbot # [ 3.175252] usb 1-1: Manufacturer: QEMU buildbot # [ 3.177252] usb 1-1: SerialNumber: 28754-0000:00:01.2-1 buildbot # [ 3.219680] EXT4-fs (vda): mounted filesystem df2bdbb3-0077-4930-b1ca-cd208a36da04 r/w with ordered data mode. Quota mode: none. buildbot # [ 2.983234] systemd[1]: Mounted /sysroot. buildbot # [ 2.985924] systemd[1]: Reached target Initrd Root File System. buildbot # [ 3.234999] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 2.994163] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 3.014944] systemd-sysroot-fstab-check[123]: /sysroot should be mounted in the initrd, will request daemon-reload.[ 3.261709] usbcore: registered new interface driver usbhid buildbot # buildbot # [ 3.022125] systemd[1]: Reload requested from client PID 123 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.024945] systemd[1]: Reloading... buildbot # [ 3.273535] usbhid: USB HID core driver buildbot # [ 3.301738] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 buildbot # [ 3.311184] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 buildbot # [ 3.187367] systemd[1]: Reloading finished in 160 ms. buildbot # [ 3.194684] systemd-sysroot-fstab-check[123]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.200246] systemd-sysroot-fstab-check[123]: Requesting swap.target/start/replace... buildbot # [ 3.207355] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 3.210672] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.214205] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.216202] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.639429] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.650201] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.659950] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.676721] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.692397] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.725534] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.973824] 9p: Installing v9fs 9p2000 file system support buildbot # [ 3.738549] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.750655] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.753555] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.756194] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.760324] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.773365] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.776623] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.639189] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 4.692272] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 4.693776] systemd[1]: Reached target Initrd File Systems. buildbot # [ 4.696658] systemd[1]: Starting Find NixOS closure... buildbot # [ 4.702584] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 4.725616] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 4.730244] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 4.740281] systemd[1]: Finished Find NixOS closure. buildbot # [ 4.742472] systemd[1]: Reached target Initrd Default Target. buildbot # [ 4.745204] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 4.764618] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 4.766920] systemd[1]: Stopped target Basic System. buildbot # [ 4.769245] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 4.770768] systemd[1]: Stopped target Path Units. buildbot # [ 4.772250] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 4.775221] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 4.777328] systemd[1]: Stopped target Slice Units. buildbot # [ 4.779263] systemd[1]: Stopped target Socket Units. buildbot # [ 4.780720] systemd[1]: Stopped target System Initialization. buildbot # [ 4.783142] systemd[1]: Stopped target Swaps. buildbot # [ 4.784456] systemd[1]: Stopped target Timer Units. buildbot # [ 4.786198] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 4.788247] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 4.790242] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 4.793142] systemd[1]: Stopped Find NixOS closure. buildbot # [ 4.794540] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 4.798165] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 4.801205] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 4.803959] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 4.805499] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 4.807419] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 4.811393] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 4.813447] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 4.815566] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 4.819813] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 4.821604] systemd[1]: Stopped target Local File Systems. buildbot # [ 4.823341] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 4.825965] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 4.828223] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 4.830232] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 4.833908] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.835857] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.838257] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 4.841305] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 4.844544] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 4.850284] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 4.856213] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 4.858206] systemd[1]: Closed udev Control Socket. buildbot # [ 4.860135] systemd[1]: Starting Cleanup udev Database... buildbot # [ 4.862239] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 4.864337] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 4.866222] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 4.869231] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 4.871163] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 4.873305] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 4.876300] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 4.878919] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.897758] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 4.900661] systemd[1]: Finished Cleanup udev Database. buildbot # [ 4.903261] systemd[1]: Reached target Switch Root. buildbot # [ 4.905570] systemd[1]: Starting NixOS Activation... buildbot # [ 5.103277] initrd-nixos-activation-start[177]: booting system configuration /nix/store/agxb7rg4vhbayg8vbb208g65bd4qh0mg-nixos-system-buildbot-test buildbot # [ 5.182833] initrd-nixos-activation-start[177]: running activation script... buildbot # [ 5.687488] initrd-nixos-activation-start[200]: setting up /etc... buildbot # [ 6.002663] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 6.006249] systemd[1]: Finished NixOS Activation. buildbot # [ 6.008427] systemd[1]: Starting Switch Root... buildbot # [ 6.024893] systemd[1]: Switching root. buildbot # [ 6.284813] systemd-journald[67]: Received SIGTERM from PID 1 (systemd). buildbot # [ 6.452273] NET: Registered PF_VSOCK protocol family buildbot # [ 6.845928] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 6.862463] systemd[1]: Detected virtualization kvm. buildbot # [ 6.865669] systemd[1]: Detected architecture x86-64. buildbot # [ 6.869013] systemd[1]: Detected first boot. buildbot # [ 6.878432] systemd[1]: Initializing machine ID from random generator. buildbot # [ 7.141813] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 7.285264] systemd[1]: Applying preset policy. buildbot # [ 7.886175] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 8.497411] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 8.499869] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 8.504047] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 8.507373] systemd[1]: Created slice Slice /system/getty. buildbot # [ 8.509567] systemd[1]: Created slice User and Session Slice. buildbot # [ 8.511296] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 8.513415] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 8.515305] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 8.516615] systemd[1]: Expecting device /dev/ttyS0... buildbot # [ 8.517963] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 8.519475] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 8.520832] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 8.522275] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 8.523826] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 8.525533] systemd[1]: Reached target Path Units. buildbot # [ 8.526853] systemd[1]: Reached target Remote File Systems. buildbot # [ 8.528314] systemd[1]: Reached target Slice Units. buildbot # [ 8.529594] systemd[1]: Reached target Swaps. buildbot # [ 8.533722] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 8.538850] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 8.542933] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 8.546995] systemd[1]: Listening on Factory Reset Management. buildbot # [ 8.552560] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 8.554752] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 8.559479] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 8.561476] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 8.563366] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.565656] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.578671] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 8.580504] systemd[1]: Listening on udev Control Socket. buildbot # [ 8.582106] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 8.587271] systemd[1]: Mounting Huge Pages File System... buildbot # [ 8.591899] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 8.599004] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 8.609019] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 8.616490] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 8.621519] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 8.635399] systemd[1]: Starting Load Kernel Module configfs... buildbot # [ 8.637438] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 8.640054] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 8.643577] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse buildbot # [ 8.653791] systemd[1]: Mounting FUSE Control File System... buildbot # [ 8.660313] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 8.679775] systemd[1]: Starting Journal Service... buildbot # [ 8.708320] systemd[1]: Starting Load Kernel Modules... buildbot # [ 8.727471] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 8.736609] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 8.746696] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.771081] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 8.778547] systemd-journald[269]: Collecting audit messages is enabled. buildbot # [ 8.801234] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 8.814562] loop: module loaded buildbot # [ 8.815637] systemd[1]: Mounted Huge Pages File System. buildbot # [ 8.821997] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 8.832300] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 8.839035] systemd[1]: Started Journal Service. buildbot # [ 8.599105] systemd[1]: Queued start job for default target Multi-User System.[ 8.844996] EXT4-fs (vda): re-mounted df2bdbb3-0077-4930-b1ca-cd208a36da04. buildbot # buildbot # [ 8.603567] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 8.612852] systemd-modules-load[270]: Inserted module 'loop' buildbot # [ 8.614928] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 8.621392] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 8.626608] systemd[1]: modprobe@configfs.service: Deactivated successfully. buildbot # [ 8.634507] systemd[1]: Finished Load Kernel Module configfs. buildbot # [ 8.637506] systemd[1]: Mounted FUSE Control File System. buildbot # [ 8.643200] systemd-modules-load[270]: Inserted module 'tls' buildbot # [ 8.646756] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 8.656268] systemd[1]: Finished Load Kernel Modules. buildbot # [ 8.672228] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 8.682100] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 8.688101] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 8.689898] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 8.694715] systemd-oomd[272]: No swap; memory pressure usage will be degraded buildbot # [ 8.702953] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 8.717616] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 8.730341] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 8.733107] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.741097] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 9.037556] systemd-journald[269]: Received client request to flush runtime journal. buildbot # [ 8.958666] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 8.964267] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 8.967290] systemd[1]: Reached target First Boot Complete. buildbot # [ 8.971279] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 8.972857] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 8.975416] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 8.977844] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 9.042186] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 9.045114] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 9.050976] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 9.106482] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.144290] systemd-udevd[301]: Using default interface naming scheme 'v260'. buildbot # [ 9.257378] systemd[1]: Mounting /run/wrappers... buildbot # [ 9.272391] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 9.301434] systemd[1]: Mounted /run/wrappers. buildbot # [ 9.304995] systemd[1]: Reached target Local File Systems. buildbot # [ 9.310109] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 9.314682] systemd[1]: Starting register-nix-paths.service... buildbot # [ 9.322104] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 9.323715] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 9.333667] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 9.346826] systemd[1]: Starting Create System Files and Directories... buildbot # [ 9.424850] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 9.432312] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 9.512220] systemd[1]: Finished Create System Files and Directories. buildbot # [ 9.523484] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 9.530605] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 9.630607] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 9.684994] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 9.694922] systemd[1]: Starting Update is Completed... buildbot # [ 9.728465] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse buildbot # [ 9.756444] systemd[1]: Finished Update is Completed. buildbot # [ 9.926805] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 9.998248] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. buildbot # [ 10.032246] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 10.035909] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 10.042764] (udev-worker)[332]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 10.046342] (udev-worker)[336]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 10.051107] (udev-worker)[336]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 10.223222] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 10.228105] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 10.237078] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 10.238668] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 10.242883] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 10.246734] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 10.250396] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 10.253576] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 10.372934] systemd[1]: Finished register-nix-paths.service. buildbot # [ 10.698005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 buildbot # [ 10.716861] mousedev: PS/2 mouse device common for all mice buildbot # [ 10.743888] ACPI: button: Power Button [PWRF] buildbot # [ 10.791565] rtc_cmos 00:05: RTC can wake from S4 buildbot # [ 10.821089] parport_pc 00:03: reported by Plug and Play ACPI buildbot # [ 10.823079] Floppy drive(s): fd0 is 2.88M AMI BIOS buildbot # [ 10.825126] rtc_cmos 00:05: registered as rtc0 buildbot # [ 10.832177] rtc_cmos 00:05: setting system clock to 2026-07-05T06:00:19 UTC (1783231219) buildbot # [ 10.847163] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] buildbot # [ 10.857981] FDC 0 is a S82078B buildbot # [ 10.891771] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console buildbot # [ 10.910073] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 buildbot # [ 10.938931] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4 buildbot # [ 10.958769] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs buildbot # [ 10.959164] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD buildbot # [ 10.845303] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 10.848220] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 10.849789] systemd[1]: Reached target System Initialization. buildbot # [ 10.853116] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 10.855509] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 10.858785] systemd[1]: Reached target Timer Units. buildbot # [ 10.860376] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 10.863232] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 10.867349] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 10.870237] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 10.872381] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 10.876249] systemd[1]: Reached target Socket Units. buildbot # [ 10.877676] systemd[1]: Reached target Basic System. buildbot # [ 10.881840] systemd[1]: Started backdoor.service. buildbot # [ 10.889832] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 11.012116] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 buildbot # [ 11.012605] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 buildbot # [ 10.900107] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 11.042817] Console: switching to colour dummy device 80x25 buildbot # [ 11.211717] [drm] Found bochs VGA, ID 0xb0c5. buildbot # [ 11.211724] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. buildbot # [ 10.911214] systemd[1]: Starting Post-Boot Actions... buildbot # [ 10.971773] systemd[1]: Started Reset console on configuration changes. buildbot # [ 10.973653] systemd[1]: Starting resolvconf update... buildbot # [ 10.977051] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 10.980886] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 11.284152] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic buildbot # [ 11.065404] systemd[1]: Finished Post-Boot Actions. buildbot # [ 11.098332] nsncd[459]: Jul 05 06:00:20.007 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 11.109149] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # connecting to host... buildbot # [ 11.121510] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 11.123307] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 11.377354] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0 buildbot # [ 11.142129] systemd[1]: Starting User Login Management... buildbot # [ 11.158080] systemd[1]: Starting Virtual Console Setup... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 12.16 seconds) buildbot: (finished: waiting for the VM to finish booting, in 12.35 seconds) buildbot # [ 11.173549] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 11.234786] dbus-broker-launch[463]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 11.261387] dbus-broker-launch[463]: NSS returned no entry for 'systemd-timesync' buildbot # [ 11.265411] dbus-broker-launch[463]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 11.365221] dbus-broker-launch[463]: Ready buildbot # [ 11.372291] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 11.604235] fbcon: bochs-drmdrmfb (fb0) is primary device buildbot # [ 11.614318] ppdev: user-space parallel port driver buildbot # [ 11.750753] Console: switching to colour frame buffer device 160x50 buildbot # [ 11.821492] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device buildbot # [ 11.412259] systemd-logind[486]: Watching system buttons on /dev/input/event2 (Power Button) buildbot # [ 11.588598] systemd-logind[486]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) buildbot # [ 11.596774] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 11.602910] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 11.609321] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 11.613990] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 11.615950] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 11.619654] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 11.623527] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 11.628459] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 11.633727] systemd[1]: Finished resolvconf update. buildbot # [ 11.635886] systemd[1]: Reached target Preparation for Network. buildbot # [ 11.639772] systemd[1]: Starting DHCP Client... buildbot # [ 11.644139] systemd[1]: Starting Address configuration of eth1... buildbot # [ 11.645772] systemd[1]: Starting Extra networking commands.... buildbot # [ 11.648921] systemd-logind[486]: New seat seat0. buildbot # [ 11.651148] systemd-logind[486]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 11.653786] systemd[1]: Started User Login Management. buildbot # [ 11.657855] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 11.662953] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 11.712538] nsncd[542]: Jul 05 06:00:20.621 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 11.724178] systemd[1]: Starting linger-users.service... buildbot # [ 11.731755] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.736129] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 11.762161] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 11.769630] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 11.786787] network-addresses-eth1-start[553]: adding address 192.168.1.1/24... done buildbot # [ 11.820719] network-addresses-eth1-start[553]: adding address 2001:db8:1::1/64... done buildbot # [ 11.863496] systemd[1]: Finished Address configuration of eth1. buildbot # [ 11.870953] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 11.876138] systemd[1]: Finished linger-users.service. buildbot # [ 11.957158] systemd[1]: Finished Extra networking commands.. buildbot # [ 11.961119] systemd[1]: Reached target Network. buildbot # [ 11.967925] dhcpcd[558]: dhcpcd-10.3.2 starting buildbot # [ 11.976829] systemd[1]: Starting Nginx Web Server... buildbot # [ 11.980553] dhcpcd[628]: dev: loaded udev buildbot # [ 11.991899] systemd[1]: Starting PostgreSQL Server... buildbot # [ 12.003417] systemd[1]: Starting SSH Daemon... buildbot # [ 12.251814] kvm_amd: TSC scaling supported buildbot # [ 12.254151] kvm_amd: Nested Virtualization enabled buildbot # [ 12.256973] kvm_amd: Nested Paging enabled buildbot # [ 12.259290] kvm_amd: LBR virtualization supported buildbot # [ 12.263022] kvm_amd: Virtual VMLOAD VMSAVE supported buildbot # [ 12.266040] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 12.268649] kvm_amd: Virtual GIF supported buildbot # [ 12.026095] systemd[1]: Starting Permit User Sessions... buildbot # [ 12.273077] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 12.275352] kvm_amd: Virtual NMI enabled buildbot # [ 12.126541] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 12.413299] EDAC MC: Ver: 3.0.0 buildbot # [ 12.175105] systemd[1]: Finished Permit User Sessions. buildbot # [ 12.200058] systemd[1]: Started Getty on tty1. buildbot # [ 12.201396] systemd[1]: Reached target Login Prompts. buildbot # [ 12.212776] sshd[632]: Server listening on 0.0.0.0 port 22. buildbot # [ 12.215467] sshd[632]: Server listening on :: port 22. buildbot # [ 12.220627] systemd[1]: Started SSH Daemon. buildbot # [ 12.240128] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 12.616704] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 12.655411] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 12.660618] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 12.667697] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 12.669312] cfg80211: failed to load regulatory.db buildbot # [ 12.446295] setup-git-repo-start[650]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 12.450466] setup-git-repo-start[650]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 12.456398] setup-git-repo-start[650]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 12.460093] setup-git-repo-start[650]: hint: call: buildbot # [ 12.461705] setup-git-repo-start[650]: hint: buildbot # [ 12.464652] setup-git-repo-start[650]: hint: git config --global init.defaultBranch buildbot # [ 12.470169] setup-git-repo-start[650]: hint: buildbot # [ 12.471371] setup-git-repo-start[650]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 12.474669] setup-git-repo-start[650]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 12.477508] setup-git-repo-start[650]: hint: buildbot # [ 12.480657] setup-git-repo-start[650]: hint: git branch -m buildbot # [ 12.485981] setup-git-repo-start[650]: hint: buildbot # [ 12.488600] setup-git-repo-start[650]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 12.494349] setup-git-repo-start[650]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 12.522268] systemd-vconsole-setup[576]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 12.533152] systemd[1]: Finished Virtual Console Setup. buildbot # [ 12.541323] nginx-pre-start[645]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok buildbot # [ 12.544546] nginx-pre-start[645]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful buildbot # [ 12.562130] systemd[1]: Started Nginx Web Server. buildbot # [ 12.565710] postgresql-pre-start[647]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 12.570188] postgresql-pre-start[647]: This user must also own the server process. buildbot # [ 12.587264] postgresql-pre-start[647]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 12.589587] postgresql-pre-start[647]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 12.592158] postgresql-pre-start[647]: The default text search configuration will be set to "english". buildbot # [ 12.595186] postgresql-pre-start[647]: Data page checksums are disabled. buildbot # [ 12.598139] postgresql-pre-start[647]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 12.601200] postgresql-pre-start[647]: creating subdirectories ... ok buildbot # [ 12.604269] postgresql-pre-start[647]: selecting dynamic shared memory implementation ... posix buildbot # [ 12.608480] setup-git-repo-start[672]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 12.612897] setup-git-repo-start[672]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 12.616360] setup-git-repo-start[672]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 12.619708] setup-git-repo-start[672]: hint: call: buildbot # [ 12.622128] setup-git-repo-start[672]: hint: buildbot # [ 12.623682] setup-git-repo-start[672]: hint: git config --global init.defaultBranch buildbot # [ 12.627172] setup-git-repo-start[672]: hint: buildbot # [ 12.630069] setup-git-repo-start[672]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 12.632376] setup-git-repo-start[672]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 12.636463] setup-git-repo-start[672]: hint: buildbot # [ 12.637619] setup-git-repo-start[672]: hint: git branch -m buildbot # [ 12.640330] setup-git-repo-start[672]: hint: buildbot # [ 12.643415] setup-git-repo-start[672]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 12.646372] setup-git-repo-start[672]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 12.899995] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot: (finished: waiting for unit sshd.service, in 13.84 seconds) buildbot: waiting for unit setup-git-repo.service buildbot # [ 12.660132] dhcpcd[628]: eth0: waiting for carrier buildbot # [ 12.663394] dhcpcd[628]: eth0: carrier acquired buildbot # [ 12.683190] dhcpcd[628]: DUID 00:01:00:01:31:dc:af:75:52:54:00:12:34:56 buildbot # [ 12.687169] dhcpcd[628]: eth0: IAID 00:12:34:56 buildbot # [ 12.688624] dhcpcd[628]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 12.775567] postgresql-pre-start[647]: selecting default "max_connections" ... 100 buildbot # [ 12.780383] setup-git-repo-start[691]: [master (root-commit) 356b423] Initial commit with scheduled effects buildbot # [ 12.783580] setup-git-repo-start[691]: 3 files changed, 131 insertions(+) buildbot # [ 12.786907] setup-git-repo-start[691]: create mode 100644 effects-lib.nix buildbot # [ 12.789149] setup-git-repo-start[691]: create mode 100644 flake.lock buildbot # [ 12.791125] setup-git-repo-start[691]: create mode 100644 flake.nix buildbot # [ 12.870386] postgresql-pre-start[647]: selecting default "shared_buffers" ... 128MB buildbot # [ 12.901664] setup-git-repo-start[697]: To /srv/repos/test-flake.git buildbot # [ 12.903328] setup-git-repo-start[697]: * [new branch] master -> master buildbot # [ 12.906117] setup-git-repo-start[697]: branch 'master' set up to track 'origin/master'. buildbot # [ 12.914633] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 13.418540] dhcpcd[628]: eth0: soliciting a DHCP lease buildbot # [ 13.683259] NET: Registered PF_PACKET protocol family buildbot # [ 13.444751] dhcpcd[628]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 13.447199] dhcpcd[628]: eth0: probing address 10.0.2.15/24 buildbot: (finished: waiting for unit setup-git-repo.service, in 1.19 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 14.616302] dhcpcd[628]: eth0: soliciting an IPv6 router buildbot # [ 14.618486] dhcpcd[628]: eth0: Router Advertisement from fe80::2 buildbot # [ 14.620334] dhcpcd[628]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 14.622281] dhcpcd[628]: eth0: adding route to fec0::/64 buildbot # [ 14.623845] dhcpcd[628]: eth0: adding default route via fe80::2 buildbot # [ 15.220768] postgresql-pre-start[647]: selecting default time zone ... UTC buildbot # [ 15.226321] postgresql-pre-start[647]: creating configuration files ... ok buildbot # [ 15.475782] postgresql-pre-start[647]: running bootstrap script ... ok buildbot # [ 16.092187] postgresql-pre-start[647]: performing post-bootstrap initialization ... ok buildbot # [ 16.331913] postgresql-pre-start[647]: syncing data to disk ... ok buildbot # [ 16.333560] postgresql-pre-start[647]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 16.335944] postgresql-pre-start[647]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 16.339953] postgresql-pre-start[647]: Success. You can now start the database server using: buildbot # [ 16.342537] postgresql-pre-start[647]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 16.464689] postgres[755]: [755] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 16.478056] postgres[755]: [755] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 16.480187] postgres[755]: [755] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 16.483104] postgres[755]: [755] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 16.496136] postgres[761]: [761] LOG: database system was shut down at 2026-07-05 06:00:24 GMT buildbot # [ 16.505863] postgres[755]: [755] LOG: database system is ready to accept connections buildbot # [ 16.511728] systemd[1]: Started PostgreSQL Server. buildbot # [ 16.517572] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 16.714411] postgresql-setup-start[772]: CREATE DATABASE buildbot # [ 16.762858] postgresql-setup-start[777]: CREATE ROLE buildbot # [ 16.786985] postgresql-setup-start[779]: ALTER DATABASE buildbot # [ 16.793884] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 16.796284] systemd[1]: Reached target PostgreSQL. buildbot # [ 16.801584] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 16.860325] buildbot-master-pre-start[784]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 19.004902] dhcpcd[628]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 19.007770] dhcpcd[628]: eth0: adding route to 10.0.2.0/24 buildbot # [ 19.009531] dhcpcd[628]: eth0: adding default route via 10.0.2.2 buildbot # [ 19.133375] systemd[1]: Started DHCP Client. buildbot # [ 23.584850] buildbot-master-pre-start[786]: updating existing installation buildbot # [ 23.588280] buildbot-master-pre-start[786]: not touching existing buildbot.tac buildbot # [ 23.590138] buildbot-master-pre-start[786]: creating buildbot.tac.new instead buildbot # [ 23.591817] buildbot-master-pre-start[786]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 23.593825] buildbot-master-pre-start[786]: creating database (postgresql://@/buildbot) buildbot # [ 23.595769] buildbot-master-pre-start[786]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 23.773418] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 23.779942] systemd[1]: Started Buildbot Worker.. buildbot # [ 23.781912] systemd[1]: Reached target Multi-User System. buildbot # [ 23.784936] systemd[1]: Startup finished in 954ms (kernel) + 5.189s (initrd) + 17.640s (userspace) = 23.784s. buildbot: (finished: waiting for unit multi-user.target, in 10.03 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 25.489300] twistd[895]: Starting worker local-worker-000 buildbot # [ 25.492434] twistd[895]: 2026-07-05T06:00:33+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 25.495645] twistd[895]: 2026-07-05T06:00:34+0000 [-] Loaded. buildbot # [ 25.497174] twistd[895]: 2026-07-05T06:00:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 25.501202] twistd[895]: 2026-07-05T06:00:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 25.504740] twistd[895]: 2026-07-05T06:00:34+0000 [-] Starting Worker -- version: 2026.06.26 buildbot # [ 25.507188] twistd[895]: 2026-07-05T06:00:34+0000 [-] recording hostname in twistd.hostname buildbot # [ 25.509717] twistd[895]: 2026-07-05T06:00:34+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 25.521901] twistd[895]: 2026-07-05T06:00:34+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.1824365736547033 seconds. buildbot # [ 25.526738] twistd[895]: 2026-07-05T06:00:34+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 27.712405] twistd[895]: 2026-07-05T06:00:36+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 27.718206] twistd[895]: 2026-07-05T06:00:36+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 3.068822411716627 seconds. buildbot # [ 27.723151] twistd[895]: 2026-07-05T06:00:36+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 27.808465] twistd[894]: 2026-07-05T06:00:33+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 27.811536] twistd[894]: 2026-07-05T06:00:36+0000 [-] Loaded. buildbot # [ 27.813154] twistd[894]: 2026-07-05T06:00:36+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 27.817372] twistd[894]: 2026-07-05T06:00:36+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 27.820556] twistd[894]: 2026-07-05T06:00:36+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 27.834578] twistd[894]: 2026-07-05T06:00:36+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg' buildbot # [ 28.869462] twistd[894]: 2026-07-05T06:00:37+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 28.986206] twistd[894]: 2026-07-05T06:00:37+0000 [-] adding 9 new builders, removing 0 buildbot # [ 29.118757] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 3 new services, removing 0 buildbot # [ 29.248179] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 29.254092] twistd[894]: 2026-07-05T06:00:38+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 29.267407] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 29.453952] twistd[894]: 2026-07-05T06:00:38+0000 [-] BuildbotSite starting on 8010 buildbot # [ 29.456632] twistd[894]: 2026-07-05T06:00:38+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 29.459982] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 5 new workers, removing 0 buildbot # [ 29.474749] twistd[894]: 2026-07-05T06:00:38+0000 [-] PBServerFactory starting on 9989 buildbot # [ 29.476632] twistd[894]: 2026-07-05T06:00:38+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 29.509316] twistd[894]: 2026-07-05T06:00:38+0000 [-] Starting Worker -- version: 2026.06.26 buildbot # [ 29.511733] twistd[894]: 2026-07-05T06:00:38+0000 [-] recording hostname in twistd.hostname buildbot # [ 29.514218] twistd[894]: 2026-07-05T06:00:38+0000 [-] message from master: attached buildbot # [ 29.518103] twistd[894]: 2026-07-05T06:00:38+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 29.527907] twistd[894]: 2026-07-05T06:00:38+0000 [-] bot attached buildbot # [ 29.530483] twistd[894]: 2026-07-05T06:00:38+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 29.532919] twistd[894]: 2026-07-05T06:00:38+0000 [-] message from master: attached buildbot # [ 29.578945] twistd[894]: 2026-07-05T06:00:38+0000 [-] BuildMaster is running buildbot # [ 29.588332] sshd-session[964]: Accepted publickey for root from ::1 port 35544 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 29.607125] sshd-session[964]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 29.654671] systemd[1]: Created slice Slice /user/0. buildbot # [ 29.660365] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 29.674487] systemd-logind[486]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 29.714146] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 29.721222] systemd[1]: Starting User Manager for UID 0... buildbot # [ 29.768292] (systemd)[970]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 29.777105] systemd-logind[486]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 30.138229] systemd[970]: Queued start job for default target Main User Target. buildbot # [ 30.142976] systemd[970]: Created slice User Application Slice. buildbot # [ 30.144768] systemd[970]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 30.147198] systemd[970]: Reached target Paths. buildbot # [ 30.148728] systemd[970]: Reached target Timers. buildbot # [ 30.153166] systemd[970]: Starting D-Bus User Message Bus Socket... buildbot # [ 30.156548] systemd[970]: Starting Create User Files and Directories... buildbot # [ 30.205766] systemd[970]: Finished Create User Files and Directories. buildbot # [ 30.247596] systemd[970]: Listening on D-Bus User Message Bus Socket. buildbot # [ 30.249564] systemd[970]: Reached target Sockets. buildbot # [ 30.253274] systemd[970]: Reached target Basic System. buildbot # [ 30.254901] systemd[970]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 30.257676] systemd[1]: Started User Manager for UID 0. buildbot # [ 30.260215] systemd[970]: Reached target Main User Target. buildbot # [ 30.261886] systemd[970]: Startup finished in 443ms. buildbot # [ 30.263305] systemd[1]: Started Session 1 of User root. buildbot # [ 30.311174] sshd-session[982]: Received disconnect from ::1 port 35544:11: disconnected by user buildbot # [ 30.313405] sshd-session[982]: Disconnected from user root ::1 port 35544 buildbot # [ 30.315365] sshd-session[964]: pam_unix(sshd:session): session closed for user root buildbot # [ 30.328854] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 30.333645] systemd-logind[486]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 30.337162] systemd-logind[486]: Removed session 1. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 6.39 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 30.528964] sshd-session[987]: Accepted publickey for root from ::1 port 35558 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 30.544526] sshd-session[987]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # % Total % Received % Xferd Average Speed Time Time [ 30.565142] systemd-logind[486]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 30.568141] systemd[1]: Started Session 3 of User root. buildbot # Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.21 seconds) (finished: subtest: Master and worker services start, in 6.78 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 30.667483] sshd-session[998]: Received disconnect from ::1 port 35558:11: disconnected by user buildbot # [ 30.670692] sshd-session[998]: Disconnected from user root ::1 port 35558 buildbot # [ 30.673644] sshd-session[987]: pam_unix(sshd:session): session closed for user root buildbot # [ 30.682620] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 30.686682] systemd-logind[486]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 30.692515] systemd-logind[486]: Removed session 3. buildbot # [ 30.725053] twistd[894]: 2026-07-05T06:00:39+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 [ 30.791332] twistd[895]: 2026-07-05T06:00:39+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # 266 0 0 7353 0 [ 30.806775] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=50340) buildbot # 0100 26[ 30.812939] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # 6 100 266 0 0 4520 0 0100[ 30.828194] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # 266 100 266 0 0 3513 0 [ 30.843695] twistd[894]: 2026-07-05T06:00:39+0000 [-] bot attached buildbot # 0 buildbot # [ 30.852130] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 30.854947] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 30.857605] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 30.860321] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 30.863629] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 30.866597] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 30.869908] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 30.872947] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 30.876283] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.879546] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.881908] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.885085] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.22 seconds) (finished: subtest: Project is registered, in 0.22 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot # [ 30.887528] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.891069] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.893162] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.896256] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached buildbot # [ 30.903509] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 30.905907] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.62 seconds) (finished: subtest: CLI list-schedules works, in 0.62 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 98.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 356b423..c6b51b4 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.15 seconds) (finished: subtest: Push a new commit to trigger build, in 0.15 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1215 0 0100 51 100 51 0 0 967 0 0100 51 100 51 0 0 814 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1145 0 0100 51 100 51 0 0 930 0 0100 51 100 51 0 0 786 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1184 0 0100 51 100 51 0 0 960 0 0100 51 100 51 0 0 810 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1349 0 0100 51 100 51 0 0 1069 0 0100 51 100 51 0 0 886 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1294 0 0100 51 100 51 0 0 1026 0 0100 51 100 51 0 0 853 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1356 0 0100 51 100 51 0 0 1067 0 0100 51 100 51 0 0 885 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1280 0 0100 51 100 51 0 0 1026 0 0100 51 100 51 0 0 857 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 39.529787] sshd-session[1075]: Accepted publickey for root from ::1 port 41810 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 39.554509] sshd-session[1075]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 39.566306] systemd-logind[486]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 39.570666] systemd[1]: Started Session 4 of User root. buildbot # [ 39.612478] sshd-session[1078]: Received disconnect from ::1 port 41810:11: disconnected by user buildbot # [ 39.615120] sshd-session[1078]: Disconnected from user root ::1 port 41810 buildbot # [ 39.616886] sshd-session[1075]: pam_unix(sshd:session): session closed for user root buildbot # [ 39.628410] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 39.634736] systemd-logind[486]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 39.637948] systemd-logind[486]: Removed session 4. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1185 0 0100 51 100 51 0 0 958 0 0100 51 100 51 0 0 808 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 39.835810] sshd-session[1083]: Accepted publickey for root from ::1 port 41822 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 39.852572] sshd-session[1083]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 39.865565] systemd-logind[486]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 39.868435] systemd[1]: Started Session 5 of User root. buildbot # [ 39.921884] sshd-session[1089]: Received disconnect from ::1 port 41822:11: disconnected by user buildbot # [ 39.925703] sshd-session[1089]: Disconnected from user root ::1 port 41822 buildbot # [ 39.928875] sshd-session[1083]: pam_unix(sshd:session): session closed for user root buildbot # [ 39.935497] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 39.940138] systemd-logind[486]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 39.944402] systemd-logind[486]: Removed session 5. buildbot # [ 39.965089] twistd[894]: 2026-07-05T06:00:48+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 39.999604] twistd[894]: 2026-07-05T06:00:48+0000 [-] gitpoller: processing 1 changes: ['c6b51b48f92d4db6d2317e0ac7fcbd335718c573'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 40.086852] twistd[894]: 2026-07-05T06:00:48+0000 [-] added change with revision c6b51b48f92d4db6d2317e0ac7fcbd335718c573 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1390 0 0100 51 100 51 0 0 1093 0 0100 51 100 51 0 0 900 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1451 0 0100 51 100 51 0 0 1130 0 0100 51 100 51 0 0 926 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1448 0 0100 51 100 51 0 0 1129 0 0100 51 100 51 0 0 916 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1458 0 0100 51 100 51 0 0 1066 0 0100 51 100 51 0 0 821 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 45.141400] twistd[894]: 2026-07-05T06:00:54+0000 [-] added buildset 1 to database buildbot # [ 45.294846] twistd[894]: 2026-07-05T06:00:54+0000 [-] starting build using worker buildbot # [ 45.302341] twistd[894]: 2026-07-05T06:00:54+0000 [-] .startBuild buildbot # [ 45.364831] twistd[894]: 2026-07-05T06:00:54+0000 [-] acquireLocks(worker , locks []) buildbot # [ 45.370419] twistd[894]: 2026-07-05T06:00:54+0000 [-] starting build .. pinging the worker buildbot # [ 45.374789] twistd[894]: 2026-07-05T06:00:54+0000 [-] sending ping buildbot # [ 45.377427] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] message from master: ping buildbot # [ 45.379857] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 45.406125] twistd[894]: 2026-07-05T06:00:54+0000 [-] : RemoteCommand.run [0] buildbot # [ 45.410178] twistd[894]: 2026-07-05T06:00:54+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 45.412341] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 45.415076] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 45.417557] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): git --version buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 45.421088] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.426929] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 45.429389] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 45.431974] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 45.451740] twistd[895]: 2026-07-05T06:00:54+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.026074 buildbot # [ 45.455728] twistd[895]: 2026-07-05T06:00:54+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 45.484317] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 [ 45.552219] twistd[894]: 2026-07-05T06:00:54+0000 [-] : RemoteCommand.run [1] buildbot # 0[ 45.557337] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 45.559431] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 45.564857] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 45.571822] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] rc=2 buildbot # 100 401 100 401 0 0 5424 0 0[ 45.594361] twistd[894]: 2026-07-05T06:00:54+0000 [-] : RemoteCommand.run [2] buildbot # 100 401 100 401 0 0 4395 0 0100 401 100 401 0 0 3829 [ 45.614174] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # 0 [ 45.618596] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 45.625180] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.22 seconds) buildbot # [ 45.638846] twistd[894]: 2026-07-05T06:00:54+0000 [-] : RemoteCommand.run [3] buildbot # [ 45.664845] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 45.669530] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 45.675202] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.683601] twistd[894]: 2026-07-05T06:00:54+0000 [-] : RemoteCommand.run [4] buildbot # [ 45.716106] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 45.718271] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 45.723192] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.736114] twistd[894]: 2026-07-05T06:00:54+0000 [-] No git repo present, making full clone buildbot # [ 45.738110] twistd[894]: 2026-07-05T06:00:54+0000 [-] : RemoteCommand.run [5] buildbot # [ 45.744247] twistd[894]: 2026-07-05T06:00:54+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 45.767951] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 45.770479] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 45.777091] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 45.798759] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.806201] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 45.812926] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 45.822979] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 46.022498] sshd-session[1127]: Accepted publickey for root from ::1 port 46608 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 46.038906] sshd-session[1127]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 46.051303] systemd-logind[486]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 46.054248] systemd[1]: Started Session 6 of User root. buildbot # [ 46.113391] sshd-session[1130]: Received disconnect from ::1 port 46608:11: disconnected by user buildbot # [ 46.115945] sshd-session[1130]: Disconnected from user root ::1 port 46608 buildbot # [ 46.118331] sshd-session[1127]: pam_unix(sshd:session): session closed for user root buildbot # [ 46.125528] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 46.129761] systemd-logind[486]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 46.134204] systemd-logind[486]: Removed session 6. buildbot # [ 46.150122] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.361762 buildbot # [ 46.156846] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 46.164394] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.193574] twistd[894]: 2026-07-05T06:00:55+0000 [-] : RemoteCommand.run [6] buildbot # [ 46.199187] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']' in dir 'build' buildbot # [ 46.212980] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 46.216103] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): RunProcess._startCommand buildbot # [ 46.221656] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f c6b51b48f92d4db6d2317e0ac7fcbd335718c573 buildbot # [ 46.229905] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.238313] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): watching logfiles {} buildbot # [ 46.243782] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'c6b51b48f92d4db6d2317e0ac7fcbd335718c573'] buildbot # [ 46.252624] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): using PTY: False buildbot # [ 46.277662] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): command finished with signal None, exit code 0, elapsedTime: 0.040522 buildbot # [ 46.284163] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 46.303883] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.332423] twistd[894]: 2026-07-05T06:00:55+0000 [-] : RemoteCommand.run [7] buildbot # [ 46.337713] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 46.343539] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 46.348885] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 46.354201] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 46.361959] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.368381] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 46.374136] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 46.382743] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 46.494446] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.146453 buildbot # [ 46.500782] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 46.506638] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.529837] twistd[894]: 2026-07-05T06:00:55+0000 [-] : RemoteCommand.run [8] buildbot # [ 46.532435] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 46.536090] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 46.538851] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 46.541437] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 46.543908] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.547748] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 46.552587] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 46.555445] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 46.570683] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.019718 buildbot # [ 46.574202] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 46.603781] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.629625] twistd[894]: 2026-07-05T06:00:55+0000 [-] Got Git revision c6b51b48f92d4db6d2317e0ac7fcbd335718c573 buildbot # [ 46.632066] twistd[894]: 2026-07-05T06:00:55+0000 [-] : RemoteCommand.run [9] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 46.649185] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 46.652565] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 46.656288] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 46.661139] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 46.666192] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 46.670296] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 46.675321] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 46.698128] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.027250 buildbot # [ 46.703219] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 46.728465] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 46.766261] twistd[894]: 2026-07-05T06:00:55+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 [ 46.806493] twistd[894]: 2026-07-05T06:00:55+0000 [-] step 'git' complete: success (None) buildbot # 0100 401 100 401 0 0 5243 0 [ 46.827177] twistd[894]: 2026-07-05T06:00:55+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # 0100 401 100 401 0 0 [ 46.857349] twistd[894]: 2026-07-05T06:00:55+0000 [-] : RemoteCommand.run [10] buildbot # [ 46.860816] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 46.864899] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 10): startCommand:shell buildbot # 3704 0 [ 46.873157] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 46.876609] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 46.880784] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.885346] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # 0100 [ 46.891267] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 46.897591] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # 401 100 401 0 0 2695 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.28 seconds) buildbot # [ 46.930665] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.034245 buildbot # [ 46.935126] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 46.949945] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.957635] twistd[894]: 2026-07-05T06:00:55+0000 [-] : RemoteCommand.run [11] buildbot # [ 46.965159] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 46.974100] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 46.976251] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 46.983636] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 46.995228] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.006599] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 47.013956] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 47.026659] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 47.172935] systemd[1]: Started Nix Daemon. buildbot # [ 47.285721] nix-daemon[1175]: accepted connection from pid 1174, user buildbot-worker buildbot # [ 47.322367] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.316870 buildbot # [ 47.331259] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 47.337409] twistd[894]: 2026-07-05T06:00:56+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.372650] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 47.392615] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 47.420681] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 47.435848] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'build flake' complete: success (None) buildbot # [ 47.450061] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0x76c293a0cae0>, hideStepIf=. at 0x76c293a0cb80>)): [] buildbot # [ 47.462562] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 47.476115] twistd[894]: 2026-07-05T06:00:56+0000 [-] : RemoteCommand.run [12] buildbot # [ 47.479922] twistd[894]: 2026-07-05T06:00:56+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 47.486099] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 47.489218] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 47.492989] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 47.497636] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.504216] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 47.508073] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 47.513320] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 47.530798] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.027811 buildbot # [ 47.535552] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 47.563428] twistd[894]: 2026-07-05T06:00:56+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.591500] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 47.602705] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 47.616812] twistd[894]: 2026-07-05T06:00:56+0000 [-] : RemoteCommand.run [13] buildbot # [ 47.621227] twistd[894]: 2026-07-05T06:00:56+0000 [-] command '['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 47.626813] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 47.630090] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 47.634494] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev c6b51b48f92d4db6d2317e0ac7fcbd335718c573 --branch master --repo test-flake buildbot # [ 47.640343] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.647749] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 47.652054] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 47.658377] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 7432 0 0100 401 100 401 0 0 5783 0 0100 401 100 401 0 0 4794 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 48.099826] nix-daemon[1175]: accepted connection from pid 1184, user buildbot-worker buildbot # [ 48.134116] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.487071 buildbot # [ 48.139153] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 48.145274] twistd[894]: 2026-07-05T06:00:57+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.253210] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0x76c293a0d300>, logEnviron=False)): [] buildbot # [ 48.267124] twistd[894]: 2026-07-05T06:00:57+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 48.282411] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 48.291990] twistd[894]: 2026-07-05T06:00:57+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 48.305756] twistd[894]: 2026-07-05T06:00:57+0000 [-] : RemoteCommand.run [14] buildbot # [ 48.310277] twistd[894]: 2026-07-05T06:00:57+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 48.315630] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 48.318855] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 48.323574] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev c6b51b48f92d4db6d2317e0ac7fcbd335718c573 --branch master --repo test-flake buildbot # [ 48.330689] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 48.338211] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 48.342657] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 48.349366] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 48.717958] nix-daemon[1175]: accepted connection from pid 1196, user buildbot-worker buildbot # [ 48.752496] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.414130 buildbot # [ 48.757607] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 48.764987] twistd[894]: 2026-07-05T06:00:57+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.809481] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0x76c293a0d4e0>, hideStepIf=. at 0x76c293a0d580>, logEnviron=False)): [] buildbot # [ 48.827993] twistd[894]: 2026-07-05T06:00:57+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 48.830631] twistd[894]: 2026-07-05T06:00:57+0000 [-] : build finished buildbot # [ 48.843107] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 11159 0 0100 411 100 411 0 0 8747 0 0100 411 100 411 0 0 7222 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.58 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.04 seconds) (finished: subtest: Schedule cache is created, in 0.06 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39273 0 0100 3793 100 3793 0 0 35493 0 0100 3793 100 3793 0 0 32436 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds) buildbot # [ 49.504662] sshd-session[1222]: Accepted publickey for root from ::1 port 46622 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 49.520557] sshd-session[1222]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 49.531154] systemd-logind[486]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 49.536467] systemd[1]: Started Session 7 of User root. buildbot # [ 49.579614] sshd-session[1235]: Received disconnect from ::1 port 46622:11: disconnected by user buildbot # [ 49.582378] sshd-session[1235]: Disconnected from user root ::1 port 46622 buildbot # [ 49.585691] sshd-session[1222]: pam_unix(sshd:session): session closed for user root buildbot # [ 49.595165] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 49.601897] systemd-logind[486]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 49.604480] systemd-logind[486]: Removed session 7. buildbot # [ 49.800431] sshd-session[1240]: Accepted publickey for root from ::1 port 46634 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 49.820120] sshd-session[1240]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 49.832884] systemd-logind[486]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 49.835898] systemd[1]: Started Session 8 of User root. buildbot # [ 49.888614] sshd-session[1243]: Received disconnect from ::1 port 46634:11: disconnected by user buildbot # [ 49.890957] sshd-session[1243]: Disconnected from user root ::1 port 46634 buildbot # [ 49.893055] sshd-session[1240]: pam_unix(sshd:session): session closed for user root buildbot # [ 49.900215] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 49.906533] systemd-logind[486]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 49.911118] systemd-logind[486]: Removed session 8. buildbot # [ 49.915721] twistd[894]: 2026-07-05T06:00:58+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39939 0 0100 3793 100 3793 0 0 36025 0 0100 3793 100 3793 0 0 32931 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39471 0 0100 3793 100 3793 0 0 35468 0 0100 3793 100 3793 0 0 32504 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37644 0 0100 3793 100 3793 0 0 34161 0 0100 3793 100 3793 0 0 31341 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.23 seconds) buildbot # [ 53.805707] twistd[894]: 2026-07-05T06:01:02+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 53.813533] twistd[894]: 2026-07-05T06:01:02+0000 [-] beginning configuration update buildbot # [ 53.820598] twistd[894]: 2026-07-05T06:01:02+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg' buildbot # [ 53.871470] twistd[894]: 2026-07-05T06:01:02+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 53.895213] twistd[894]: 2026-07-05T06:01:02+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 53.990219] twistd[894]: 2026-07-05T06:01:02+0000 [-] configuration update complete (took 0.184 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 39857 0 0100 4079 100 4079 0 0 36234 0 0100 4079 100 4079 0 0 33291 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.22 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 42669 0 0100 4079 100 4079 0 0 38569 0 0100 4079 100 4079 0 0 35242 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds) (finished: subtest: Nightly schedulers are created, in 5.23 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 65802 0 0100 2371 100 2371 0 0 51695 0 0100 2371 100 2371 0 0 42576 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.11 seconds) (finished: subtest: Scheduled effect builder exists, in 0.11 seconds) (finished: run the VM test script, in 55.82 seconds) test script finished in 55.86s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.21 seconds)