tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.01 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 12) buildbot # Formatting '/build/vm-state-buildbot/tmp.FgLCdTbJ8u', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 6ec5cb1d-7030-4a63-805e-7e70ac92d125 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/nxs4bhy3kyml43fy8zkzixb5bzzdyg1s-nixos-system-buildbot-test/init regInfo=/nix/store/x81n913qhd4jvbfmrniawnazxk38xm23-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/x81n913qhd4jvbfmrniawnazxk38xm23-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000029] arm-pv: using stolen time PV buildbot # [ 0.000393] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000576] Console: colour dummy device 80x25 buildbot # [ 0.000584] printk: legacy console [tty0] enabled buildbot # [ 0.000765] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000772] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000855] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000984] landlock: Up and running. buildbot # [ 0.000987] Yama: becoming mindful. buildbot # [ 0.001415] LSM support for eBPF active buildbot # [ 0.001538] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001557] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002601] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003345] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003350] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004565] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004657] EFI services will not be available. buildbot # [ 0.004737] smp: Bringing up secondary CPUs ... buildbot # [ 0.004747] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004750] SMP: Total of 1 processors activated. buildbot # [ 0.004753] CPU: All CPU(s) started at EL1 buildbot # [ 0.004763] CPU features: detected: Branch Target Identification buildbot # [ 0.004768] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004774] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004778] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004781] CPU features: detected: Common not Private translations buildbot # [ 0.004784] CPU features: detected: CRC32 instructions buildbot # [ 0.004787] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004791] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004794] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004797] CPU features: detected: E0PD buildbot # [ 0.004799] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004802] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004805] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004809] CPU features: detected: Fine Grained Traps buildbot # [ 0.004812] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004817] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004820] CPU features: detected: LSE atomic instructions buildbot # [ 0.004823] CPU features: detected: Privileged Access Never buildbot # [ 0.004826] CPU features: detected: PMUv3 buildbot # [ 0.004828] CPU features: detected: RAS Extension Support buildbot # [ 0.004831] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004833] CPU features: detected: Random Number Generator buildbot # [ 0.004836] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004839] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004842] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004847] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004885] alternatives: applying system-wide alternatives buildbot # [ 0.007835] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.008003] Memory: 895060K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008377] devtmpfs: initialized buildbot # [ 0.010121] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.010144] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.010165] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.010348] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.010353] 0 pages in range for non-PLT usage buildbot # [ 0.010354] 508320 pages in range for PLT usage buildbot # [ 0.010469] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.011237] DMI not present or invalid. buildbot # [ 0.014313] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016874] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.017035] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.017199] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.017221] audit: initializing netlink subsys (disabled) buildbot # [ 0.017777] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.017779] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.017783] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.017786] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.017789] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017822] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017832] cpuidle: using governor ladder buildbot # [ 0.017838] cpuidle: using governor menu buildbot # [ 0.018031] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.018048] ASID allocator initialised with 65536 entries buildbot # [ 0.019183] Serial: AMBA PL011 UART driver buildbot # [ 0.024290] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.024425] printk: console [ttyAMA0] enabled buildbot # [ 0.153687] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.153709] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.153715] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.153719] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.153723] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.153727] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.153732] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.153736] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.161537] fbcon: Taking over console buildbot # [ 0.161551] ACPI: Interpreter disabled. buildbot # [ 0.163442] iommu: Default domain type: Translated buildbot # [ 0.163452] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.165277] SCSI subsystem initialized buildbot # [ 0.172440] usbcore: registered new interface driver usbfs buildbot # [ 0.172472] usbcore: registered new interface driver hub buildbot # [ 0.172490] usbcore: registered new device driver usb buildbot # [ 0.172764] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.172771] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.172788] PTP clock support registered buildbot # [ 0.172835] EDAC MC: Ver: 3.0.0 buildbot # [ 0.177779] scmi_core: SCMI protocol bus registered buildbot # [ 0.178763] FPGA manager framework buildbot # [ 0.179741] vgaarb: loaded buildbot # [ 0.180395] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.180846] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.180874] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.183350] netfs: FS-Cache loaded buildbot # [ 0.183468] pnp: PnP ACPI: disabled buildbot # [ 0.189643] NET: Registered PF_INET protocol family buildbot # [ 0.189798] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.219609] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.219652] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.219677] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.219722] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.219798] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.219915] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.219976] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.220023] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.220100] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.220121] NET: Registered PF_XDP protocol family buildbot # [ 0.220139] PCI: CLS 0 bytes, default 64 buildbot # [ 0.220388] Trying to unpack rootfs image as initramfs... buildbot # [ 0.238603] kvm [1]: HYP mode not available buildbot # [ 0.332942] Initialise system trusted keyrings buildbot # [ 0.333723] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.335032] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.335845] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.364488] Key type asymmetric registered buildbot # [ 0.364519] Asymmetric key parser 'x509' registered buildbot # [ 0.364587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.366824] io scheduler mq-deadline registered buildbot # [ 0.366835] io scheduler kyber registered buildbot # [ 0.376612] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.378094] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.378477] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.378495] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.378509] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.378525] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.378551] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.378576] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.378665] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.378674] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.378681] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.378687] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.378692] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.378748] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.379191] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.379425] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.379443] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.379473] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.379489] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.379945] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.380129] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.380145] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.380174] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.400623] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.400811] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.400827] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.400857] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.401315] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.401501] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.401517] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.401546] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.402002] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.402191] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.402207] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.402237] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.402733] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.402920] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.402936] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.402966] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.403437] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.403624] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.403640] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.403670] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.403686] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.404141] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.404332] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.404362] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.432958] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.433174] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.433205] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.433600] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.433783] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.434032] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.434324] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.434342] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.434372] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.434828] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.435013] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.435029] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.435058] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.435670] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.435682] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.435689] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.435735] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.435784] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.435831] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.435879] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.435927] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.435976] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.436025] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.436073] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.436119] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.436183] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.436229] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.436251] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.436272] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.436294] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.436316] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.436338] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.436363] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.436385] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.467360] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.467387] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.467410] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.467432] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.467454] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.467476] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.467498] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.467519] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.467541] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.467563] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.467585] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.467607] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.467629] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.467657] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.467666] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.467671] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.481585] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.506719] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.516680] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.520189] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.522241] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.524335] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.534221] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.536264] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.546452] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.552596] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.554340] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.564599] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.573665] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.581669] msm_serial: driver initialized buildbot # [ 0.581857] SuperH (H)SCI(F) driver initialized buildbot # [ 0.581909] STM32 USART driver initialized buildbot # [ 0.611153] loop: module loaded buildbot # [ 0.611343] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.612081] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.624985] megasas: 07.734.00.00-rc1 buildbot # [ 0.625735] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.627921] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.627978] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.629621] Using buffer write method buildbot # [ 0.629709] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.631395] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.631419] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.648919] Using buffer write method buildbot # [ 0.648951] Concatenating MTD devices: buildbot # [ 0.648955] (0): "0.flash" buildbot # [ 0.648960] (1): "0.flash" buildbot # [ 0.648963] into device "0.flash" buildbot # [ 0.871061] Freeing initrd memory: 25516K buildbot # [ 0.876951] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.880610] thunder_xcv, ver 1.0 buildbot # [ 0.880652] thunder_bgx, ver 1.0 buildbot # [ 0.880675] nicpf, ver 1.0 buildbot # [ 0.881201] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.881208] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.881239] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.881247] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.881278] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.881284] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.881307] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.881313] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.881442] sky2: driver version 1.30 buildbot # [ 0.882973] usbcore: registered new interface driver usb-storage buildbot # [ 0.883088] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.883102] usbserial: USB Serial support registered for generic buildbot # [ 0.883758] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.885069] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.885096] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.885420] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.896641] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.896963] hub 1-0:1.0: USB hub found buildbot # [ 0.896978] hub 1-0:1.0: 6 ports detected buildbot # [ 0.900928] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.900956] rtc-pl031 9010000.pl031: setting system clock to 2026-07-26T05:28:10 UTC (1785043690) buildbot # [ 0.901298] i2c_dev: i2c /dev entries driver buildbot # [ 0.906223] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.906232] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.906493] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.906862] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.911189] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.911447] usbcore: registered new interface driver usbhid buildbot # [ 0.911454] usbhid: USB HID core driver buildbot # [ 0.927580] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.929083] drop_monitor: Initializing network drop monitor service buildbot # [ 0.929249] NET: Registered PF_INET6 protocol family buildbot # [ 0.932345] Segment Routing with IPv6 buildbot # [ 0.932365] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.932392] NET: Registered PF_PACKET protocol family buildbot # [ 0.934125] 9pnet: Installing 9P2000 support buildbot # [ 0.936269] Key type dns_resolver registered buildbot # [ 0.943059] registered taskstats version 1 buildbot # [ 0.943201] Loading compiled-in X.509 certificates buildbot # [ 0.951376] Demotion targets for Node 0: null buildbot # [ 0.951477] Key type .fscrypt registered buildbot # [ 0.951484] Key type fscrypt-provisioning registered buildbot # [ 0.951578] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.951598] ima: Allocated hash algorithm: sha1 buildbot # [ 0.951619] ima: No architecture policies found buildbot # [ 0.955876] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.974129] clk: Disabling unused clocks buildbot # [ 0.974152] PM: genpd: Disabling unused power domains buildbot # [ 0.978546] Freeing unused kernel memory: 4736K buildbot # [ 0.978736] Run /init as init process buildbot # [ 0.994672] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.148475] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.298509] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.329646] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.341888] systemd[1]: Detected virtualization qemu. buildbot # [ 1.343788] systemd[1]: Detected architecture arm64. buildbot # [ 1.345654] systemd[1]: Running in initrd. buildbot # [ 1.348118] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.350842] systemd[1]: Hostname set to . buildbot # [ 1.376906] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.470310] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.478515] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.479741] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.481268] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.482344] systemd[1]: Reached target Path Units. buildbot # [ 1.483171] systemd[1]: Reached target Slice Units. buildbot # [ 1.484016] systemd[1]: Reached target Swaps. buildbot # [ 1.484807] systemd[1]: Reached target Timer Units. buildbot # [ 1.485800] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.487047] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.488218] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.489273] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.489384] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.489407] systemd[1]: Reached target Socket Units. buildbot # [ 1.493483] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.500470] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.504706] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.505845] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.509431] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.528877] systemd[1]: Starting Journal Service... buildbot # [ 1.544656] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.545609] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.557513] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.576525] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.577582] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.577885] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.598119] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.605040] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.608574] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.610626] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.612156] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.620368] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.628691] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.628709] [drm] features: -context_init buildbot # [ 1.629451] [drm] number of scanouts: 1 buildbot # [ 1.629470] [drm] number of cap sets: 0 buildbot # [ 1.640937] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.640954] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.648571] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.653141] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.666802] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.666930] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.672764] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.700930] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.701114] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.701136] systemd[1]: Reached target Local File Systems. buildbot # [ 1.704950] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.713121] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.735314] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.738175] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.786872] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.801212] systemd[1]: Started Journal Service. buildbot # [ 1.791323] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.792613] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.793681] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.794716] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.795731] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.809861] systemd-udevd[81]: Using default interface naming scheme 'v260'. buildbot # [ 1.811038] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.830133] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.848153] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.928572] systemd[1]: Starting Virtual Console Setup... buildbot # [ 2.004505] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 2.008687] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.705550] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.706532] systemd[1]: Reached target System Initialization. buildbot # [ 2.707385] systemd[1]: Reached target Basic System. buildbot # [ 2.844086] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.877172] (udev-worker)[96]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.882271] (udev-worker)[96]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.924254] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.927213] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.932425] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.970081] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.982617] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.987871] systemd[1]: Mounting /sysroot... buildbot # [ 3.047421] EXT4-fs (vda): mounted filesystem 6ec5cb1d-7030-4a63-805e-7e70ac92d125 r/w with ordered data mode. Quota mode: none. buildbot # [ 3.037508] systemd[1]: Mounted /sysroot. buildbot # [ 3.039665] systemd[1]: Reached target Initrd Root File System. buildbot # [ 3.046161] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.065227] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.068083] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.102567] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.113112] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.116645] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 3.121127] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.139657] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.147604] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.180199] systemd-sysroot-fstab-check[126]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 3.183337] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.194020] systemd[1]: Reload requested from client PID 126 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.200178] systemd[1]: Reloading... buildbot # [ 3.425904] systemd[1]: Reloading finished in 229 ms. buildbot # [ 3.447687] systemd-sysroot-fstab-check[126]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.453151] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.456224] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.457764] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.461915] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.465658] systemd-sysroot-fstab-check[126]: Requesting swap.target/start/replace... buildbot # [ 3.473721] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.476141] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.479793] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.484348] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.508951] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.510053] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.544225] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.586256] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.587304] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.591819] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.606442] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.636103] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.641392] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 3.655833] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.658596] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.664390] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.690441] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.691802] systemd[1]: Stopped target Basic System. buildbot # [ 3.693145] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.696408] systemd[1]: Stopped target Path Units. buildbot # [ 3.700910] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.704107] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.708427] systemd[1]: Stopped target Slice Units. buildbot # [ 3.712187] systemd[1]: Stopped target Socket Units. buildbot # [ 3.714186] systemd[1]: Stopped target System Initialization. buildbot # [ 3.716742] systemd[1]: Stopped target Swaps. buildbot # [ 3.720776] systemd[1]: Stopped target Timer Units. buildbot # [ 3.722639] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.723790] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.726851] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.732435] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.734192] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.737116] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.740407] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.744155] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.745888] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.756176] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.759200] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.765289] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.766532] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.767583] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.774587] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.776713] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.780171] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.781268] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.784244] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.785355] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.788341] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.789140] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.791216] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.794872] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.795926] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.796972] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.797974] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.802496] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.805403] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.806704] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.811804] systemd[1]: Closed udev Control Socket. buildbot # [ 3.812888] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.813672] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.814749] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.815655] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.817982] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.819035] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.820075] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.845289] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.847721] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.849223] systemd[1]: Reached target Switch Root. buildbot # [ 3.852656] systemd[1]: Starting NixOS Activation... buildbot # [ 4.034004] initrd-nixos-activation-start[175]: booting system configuration /nix/store/nxs4bhy3kyml43fy8zkzixb5bzzdyg1s-nixos-system-buildbot-test buildbot # [ 4.103074] initrd-nixos-activation-start[175]: running activation script... buildbot # [ 4.540565] initrd-nixos-activation-start[198]: setting up /etc... buildbot # [ 4.811877] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.814673] systemd[1]: Finished NixOS Activation. buildbot # [ 4.815849] systemd[1]: Starting Switch Root... buildbot # [ 4.838026] systemd[1]: Switching root. buildbot # [ 4.901808] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 5.481422] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.493669] systemd[1]: Detected virtualization qemu. buildbot # [ 5.495853] systemd[1]: Detected architecture arm64. buildbot # [ 5.498990] systemd[1]: Detected first boot. buildbot # [ 5.506141] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.833192] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 6.029002] NET: Registered PF_VSOCK protocol family buildbot # [ 6.035821] Guest personality initialized and is inactive buildbot # [ 6.036769] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 6.036800] Initialized host personality buildbot # [ 6.102348] systemd[1]: Applying preset policy. buildbot # [ 6.633418] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 7.154938] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 7.156898] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 7.159616] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 7.163369] systemd[1]: Created slice Slice /system/getty. buildbot # [ 7.166000] systemd[1]: Created slice User and Session Slice. buildbot # [ 7.167750] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 7.169885] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 7.171735] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 7.173333] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 7.174866] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 7.176508] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 7.177553] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 7.179938] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 7.182032] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 7.183408] systemd[1]: Reached target Path Units. buildbot # [ 7.184615] systemd[1]: Reached target Remote File Systems. buildbot # [ 7.186376] systemd[1]: Reached target Slice Units. buildbot # [ 7.187977] systemd[1]: Reached target Swaps. buildbot # [ 7.191734] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 7.196493] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.200230] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.204236] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.209758] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.212192] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.216626] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.218709] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.220284] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.223097] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.234779] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.236378] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.238022] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.243673] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.248702] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.255390] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.267225] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.277504] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.292782] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.294447] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.314333] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.316065] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.318815] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.375374] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.377521] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.415166] systemd[1]: Starting Journal Service... buildbot # [ 7.433226] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.458987] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.467233] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.469060] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.505838] fuse: init (API version 7.45) buildbot # [ 7.509210] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.551770] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.555296] systemd-journald[270]: Collecting audit messages is enabled. buildbot # [ 7.563274] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.563791] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.564182] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.558177] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.576500] systemd[1]: Started Journal Service. buildbot # [ 7.567639] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.573845] systemd-modules-load[271]: Module 'atkbd' is built in buildbot # [ 7.578546] systemd-modules-load[271]: Module 'loop' is built in buildbot # [ 7.585110] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.589463] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.597133] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.617661] EXT4-fs (vda): re-mounted 6ec5cb1d-7030-4a63-805e-7e70ac92d125. buildbot # [ 7.607399] systemd-modules-load[271]: Inserted module 'tls' buildbot # [ 7.615209] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.617488] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.622081] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.626613] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.630240] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.636356] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.639339] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.642360] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.660347] systemd-oomd[273]: No swap; memory pressure usage will be degraded buildbot # [ 7.669092] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.670128] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.676134] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.685064] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.708093] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.712201] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.715394] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.782026] systemd-journald[270]: Received client request to flush runtime journal. buildbot # [ 7.844513] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.850304] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.854029] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.858566] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.879018] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.922335] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.925039] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 8.030495] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 8.031623] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 8.037737] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 8.153542] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.210474] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.211735] systemd[1]: Reached target Local File Systems. buildbot # [ 8.223374] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.234607] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.237670] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.245135] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.252069] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.269615] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.413795] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.426835] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.511950] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.527206] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.533418] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.564905] systemd-udevd[303]: Using default interface naming scheme 'v260'. buildbot # [ 8.654824] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.727574] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.738221] systemd[1]: Starting Update is Completed... buildbot # [ 8.818285] systemd[1]: Finished Update is Completed. buildbot # [ 8.835978] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 9.358204] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.360829] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.638400] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.707782] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.710822] systemd[1]: Reached target System Initialization. buildbot # [ 9.712811] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.717857] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.720756] systemd[1]: Reached target Timer Units. buildbot # [ 9.722601] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.727451] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.728922] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.731374] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.735259] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.739091] systemd[1]: Reached target Socket Units. buildbot # [ 9.742199] systemd[1]: Reached target Basic System. buildbot # [ 9.743909] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.748830] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.751528] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.755040] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.778368] systemd[1]: Starting resolvconf update... buildbot # [ 9.785946] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.820353] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.875528] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.920154] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.925205] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.930746] nsncd[391]: Jul 26 05:28:19.536 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.941075] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.952964] systemd[1]: Starting User Login Management... buildbot # [ 9.986062] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 10.025873] dbus-broker-launch[396]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 10.049660] dbus-broker-launch[396]: NSS returned no entry for 'systemd-timesync' buildbot # [ 10.053263] dbus-broker-launch[396]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 10.095526] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 10.140545] systemd-logind[413]: New seat seat0. buildbot # [ 10.145477] dbus-broker-launch[396]: Ready buildbot # [ 10.148766] systemd[1]: Started User Login Management. buildbot # [ 10.158144] systemd[1]: Starting linger-users.service... buildbot # [ 10.174223] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 10.181782] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 10.183897] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 10.187506] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 10.193692] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 10.197964] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 10.201456] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 10.220721] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.264579] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.269946] systemd[1]: Finished linger-users.service. buildbot # [ 10.309252] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.311676] nsncd[459]: Jul 26 05:28:19.922 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.320615] systemd[1]: Finished resolvconf update. buildbot # [ 10.322133] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.326293] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.328652] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.330571] systemd[1]: Starting DHCP Client... buildbot # [ 10.334877] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.560750] dhcpcd[487]: dhcpcd-10.3.2 starting buildbot # [ 10.579806] dhcpcd[518]: dev: loaded udev buildbot # [ 10.586754] dhcpcd[518]: no valid interfaces found buildbot # [ 10.589513] dhcpcd[518]: libudev: received NULL device buildbot # [ 10.591749] dhcpcd[518]: no valid interfaces found buildbot # [ 10.593963] dhcpcd[518]: libudev: received NULL device buildbot # [ 10.627169] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.634410] systemd[1]: Reached target Network. buildbot # [ 10.640755] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.650311] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.664192] systemd[1]: Starting SSH Daemon... buildbot # [ 10.697744] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.810483] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.823063] sshd[532]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.827261] sshd[532]: Server listening on :: port 22. buildbot # [ 10.836500] systemd[1]: Started Getty on tty1. buildbot # [ 10.841788] systemd[1]: Reached target Login Prompts. buildbot # [ 10.845790] systemd[1]: Started SSH Daemon. buildbot # [ 10.847860] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 11.072974] setup-git-repo-start[548]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.080781] setup-git-repo-start[548]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.086610] setup-git-repo-start[548]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.095571] setup-git-repo-start[548]: hint: call: buildbot # [ 11.099016] setup-git-repo-start[548]: hint: buildbot # [ 11.103578] setup-git-repo-start[548]: hint: git config --global init.defaultBranch buildbot # [ 11.109498] setup-git-repo-start[548]: hint: buildbot # [ 11.111373] setup-git-repo-start[548]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.117713] setup-git-repo-start[548]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.123560] setup-git-repo-start[548]: hint: buildbot # [ 11.127900] setup-git-repo-start[548]: hint: git branch -m buildbot # [ 11.132215] setup-git-repo-start[548]: hint: buildbot # [ 11.135256] setup-git-repo-start[548]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.143155] setup-git-repo-start[548]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 11.148657] nginx-pre-start[543]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 11.156769] nginx-pre-start[543]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 11.164586] postgresql-pre-start[545]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 11.171661] postgresql-pre-start[545]: This user must also own the server process. buildbot # [ 11.178860] postgresql-pre-start[545]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 11.185221] postgresql-pre-start[545]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 11.192203] postgresql-pre-start[545]: The default text search configuration will be set to "english". buildbot # [ 11.198092] postgresql-pre-start[545]: Data page checksums are disabled. buildbot # [ 11.203045] postgresql-pre-start[545]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 11.209574] postgresql-pre-start[545]: creating subdirectories ... ok buildbot # [ 11.213751] postgresql-pre-start[545]: selecting dynamic shared memory implementation ... posix buildbot # [ 11.220975] systemd[1]: Started Nginx Web Server. buildbot # [ 11.225068] setup-git-repo-start[554]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.235206] setup-git-repo-start[554]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.239920] setup-git-repo-start[554]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.248912] setup-git-repo-start[554]: hint: call: buildbot # [ 11.249631] setup-git-repo-start[554]: hint: buildbot # [ 11.250251] setup-git-repo-start[554]: hint: git config --global init.defaultBranch buildbot # [ 11.251384] setup-git-repo-start[554]: hint: buildbot # [ 11.252000] setup-git-repo-start[554]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.266601] setup-git-repo-start[554]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.276622] setup-git-repo-start[554]: hint: buildbot # [ 11.277990] setup-git-repo-start[554]: hint: git branch -m buildbot # [ 11.284855] setup-git-repo-start[554]: hint: buildbot # [ 11.285504] setup-git-repo-start[554]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.286938] setup-git-repo-start[554]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 11.333179] setup-git-repo-start[564]: [master (root-commit) e23b401] Initial commit with scheduled effects buildbot # [ 11.339854] setup-git-repo-start[564]: 3 files changed, 131 insertions(+) buildbot # [ 11.346232] setup-git-repo-start[564]: create mode 100644 effects-lib.nix buildbot # [ 11.352316] setup-git-repo-start[564]: create mode 100644 flake.lock buildbot # [ 11.353238] setup-git-repo-start[564]: create mode 100644 flake.nix buildbot # [ 11.406667] postgresql-pre-start[545]: selecting default "max_connections" ... 100 buildbot # [ 11.506719] setup-git-repo-start[568]: To /srv/repos/test-flake.git buildbot # [ 11.513236] setup-git-repo-start[568]: * [new branch] master -> master buildbot # [ 11.515533] setup-git-repo-start[568]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.520922] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 11.567683] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 11.560171] postgresql-pre-start[545]: selecting default "shared_buffers" ... 128MB buildbot # [ 12.129210] systemd[1]: Starting Virtual Console Setup... buildbot # [ 12.184427] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 12.193497] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 12.196491] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 12.208246] systemd[1]: Starting Virtual Console Setup... buildbot # [ 12.439627] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 12.472636] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 12.481969] systemd[1]: Started backdoor.service. buildbot # connecting to host... buildbot # [ 12.620160] 8021q: 802.1Q VLAN Support v1.8 buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 12.94 seconds) buildbot: (finished: waiting for the VM to finish booting, in 13.49 seconds) buildbot # [ 12.695100] (udev-worker)[587]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 12.707359] (udev-worker)[587]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 12.784289] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 12.774723] (udev-worker)[586]: Network interface NamePolicy= disabled on kernel command line. buildbot: (finished: waiting for unit sshd.service, in 13.65 seconds) buildbot: waiting for unit setup-git-repo.service buildbot # [ 12.837531] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 12.838055] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 12.843233] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 12.843588] cfg80211: failed to load regulatory.db buildbot # [ 12.849022] systemd-vconsole-setup[600]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 12.856579] systemd[1]: Finished Virtual Console Setup. buildbot: (finished: waiting for unit setup-git-repo.service, in 0.11 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 13.092950] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 13.108257] systemd[1]: Starting Address configuration of eth1... buildbot # [ 13.220814] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 13.208182] dhcpcd[518]: eth0: waiting for carrier buildbot # [ 13.212515] dhcpcd[518]: eth0: carrier acquired buildbot # [ 13.230046] dhcpcd[518]: DUID 00:01:00:01:31:f8:57:76:52:54:00:12:34:56 buildbot # [ 13.232409] dhcpcd[518]: eth0: IAID 00:12:34:56 buildbot # [ 13.234175] dhcpcd[518]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 13.263443] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 13.270716] network-addresses-eth1-start[635]: adding address 192.168.1.1/24... done buildbot # [ 13.289338] network-addresses-eth1-start[635]: adding address 2001:db8:1::1/64... done buildbot # [ 13.311094] systemd[1]: Finished Address configuration of eth1. buildbot # [ 13.332510] dhcpcd[518]: eth0: soliciting a DHCP lease buildbot # [ 13.340738] dhcpcd[518]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 13.343998] systemd-logind[413]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 13.353990] dhcpcd[518]: eth0: probing address 10.0.2.15/24 buildbot # [ 13.455950] mousedev: PS/2 mouse device common for all mice buildbot # [ 13.623076] systemd-logind[413]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 14.702203] postgresql-pre-start[545]: selecting default time zone ... UTC buildbot # [ 14.710491] postgresql-pre-start[545]: creating configuration files ... ok buildbot # [ 15.216196] postgresql-pre-start[545]: running bootstrap script ... ok buildbot # [ 15.792765] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 15.817911] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.819095] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.819849] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 15.823449] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.865957] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.872426] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.895651] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.919506] systemd-logind[413]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 16.136776] dhcpcd[518]: eth0: soliciting an IPv6 router buildbot # [ 16.138380] dhcpcd[518]: eth0: Router Advertisement from fe80::2 buildbot # [ 16.140295] dhcpcd[518]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 16.144297] dhcpcd[518]: eth0: adding route to fec0::/64 buildbot # [ 16.146673] dhcpcd[518]: eth0: adding default route via fe80::2 buildbot # [ 16.317645] postgresql-pre-start[545]: performing post-bootstrap initialization ... ok buildbot # [ 16.326207] systemd-vconsole-setup[692]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 16.331564] systemd[1]: Finished Virtual Console Setup. buildbot # [ 16.459676] postgresql-pre-start[545]: syncing data to disk ... ok buildbot # [ 16.460912] postgresql-pre-start[545]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 16.463549] postgresql-pre-start[545]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 16.466058] postgresql-pre-start[545]: Success. You can now start the database server using: buildbot # [ 16.467282] postgresql-pre-start[545]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 16.613583] postgres[698]: [698] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 16.629336] postgres[698]: [698] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 16.632226] postgres[698]: [698] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 16.634714] postgres[698]: [698] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 16.648438] postgres[713]: [713] LOG: database system was shut down at 2026-07-26 05:28:25 GMT buildbot # [ 16.656656] postgres[698]: [698] LOG: database system is ready to accept connections buildbot # [ 16.662335] systemd[1]: Started PostgreSQL Server. buildbot # [ 16.667244] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 16.861229] postgresql-setup-start[724]: CREATE DATABASE buildbot # [ 16.911385] postgresql-setup-start[729]: CREATE ROLE buildbot # [ 16.936496] postgresql-setup-start[731]: ALTER DATABASE buildbot # [ 16.942948] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 16.946203] systemd[1]: Reached target PostgreSQL. buildbot # [ 16.948597] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 17.004252] buildbot-master-pre-start[736]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 18.592811] dhcpcd[518]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 18.592967] dhcpcd[518]: eth0: adding route to 10.0.2.0/24 buildbot # [ 18.593013] dhcpcd[518]: eth0: adding default route via 10.0.2.2 buildbot # [ 18.735043] systemd[1]: Started DHCP Client. buildbot # [ 23.092412] buildbot-master-pre-start[738]: updating existing installation buildbot # [ 23.092568] buildbot-master-pre-start[738]: not touching existing buildbot.tac buildbot # [ 23.092606] buildbot-master-pre-start[738]: creating buildbot.tac.new instead buildbot # [ 23.092637] buildbot-master-pre-start[738]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 23.092668] buildbot-master-pre-start[738]: creating database (postgresql://@/buildbot) buildbot # [ 23.092701] buildbot-master-pre-start[738]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 23.502828] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 23.508294] systemd[1]: Started Buildbot Worker.. buildbot # [ 23.510352] systemd[1]: Reached target Multi-User System. buildbot # [ 23.512563] systemd[1]: Startup finished in 967ms (kernel) + 4.018s (initrd) + 18.526s (userspace) = 23.512s. buildbot: (finished: waiting for unit multi-user.target, in 11.45 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 25.202489] twistd[852]: Starting worker local-worker-000 buildbot # [ 25.202620] twistd[852]: 2026-07-26T05:28:34+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 25.206951] twistd[852]: 2026-07-26T05:28:34+0000 [-] Loaded. buildbot # [ 25.207080] twistd[852]: 2026-07-26T05:28:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 25.207126] twistd[852]: 2026-07-26T05:28:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 25.207159] twistd[852]: 2026-07-26T05:28:34+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 25.207200] twistd[852]: 2026-07-26T05:28:34+0000 [-] recording hostname in twistd.hostname buildbot # [ 25.207232] twistd[852]: 2026-07-26T05:28:34+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 25.214640] twistd[852]: 2026-07-26T05:28:34+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.3243663789961158 seconds. buildbot # [ 25.227218] twistd[852]: 2026-07-26T05:28:34+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 27.210626] twistd[851]: 2026-07-26T05:28:34+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 27.212789] twistd[851]: 2026-07-26T05:28:36+0000 [-] Loaded. buildbot # [ 27.212874] twistd[851]: 2026-07-26T05:28:36+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 27.212910] twistd[851]: 2026-07-26T05:28:36+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 27.212942] twistd[851]: 2026-07-26T05:28:36+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 27.222080] twistd[851]: 2026-07-26T05:28:36+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 27.555705] twistd[852]: 2026-07-26T05:28:37+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 27.560392] twistd[852]: 2026-07-26T05:28:37+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.463637672131095 seconds. buildbot # [ 27.563450] twistd[852]: 2026-07-26T05:28:37+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 28.122163] twistd[851]: 2026-07-26T05:28:37+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 28.229697] twistd[851]: 2026-07-26T05:28:37+0000 [-] adding 9 new builders, removing 0 buildbot # [ 28.357869] twistd[851]: 2026-07-26T05:28:37+0000 [-] adding 3 new services, removing 0 buildbot # [ 28.518664] twistd[851]: 2026-07-26T05:28:38+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 28.524975] twistd[851]: 2026-07-26T05:28:38+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 28.537358] twistd[851]: 2026-07-26T05:28:38+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 28.730509] twistd[851]: 2026-07-26T05:28:38+0000 [-] BuildbotSite starting on 8010 buildbot # [ 28.732981] twistd[851]: 2026-07-26T05:28:38+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 28.735014] twistd[851]: 2026-07-26T05:28:38+0000 [-] adding 5 new workers, removing 0 buildbot # [ 28.745356] twistd[851]: 2026-07-26T05:28:38+0000 [-] PBServerFactory starting on 9989 buildbot # [ 28.747812] twistd[851]: 2026-07-26T05:28:38+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 28.770125] twistd[851]: 2026-07-26T05:28:38+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 28.772199] twistd[851]: 2026-07-26T05:28:38+0000 [-] recording hostname in twistd.hostname buildbot # [ 28.773555] twistd[851]: 2026-07-26T05:28:38+0000 [-] message from master: attached buildbot # [ 28.776321] twistd[851]: 2026-07-26T05:28:38+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 28.785849] twistd[851]: 2026-07-26T05:28:38+0000 [-] bot attached buildbot # [ 28.788987] twistd[851]: 2026-07-26T05:28:38+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 28.793032] twistd[851]: 2026-07-26T05:28:38+0000 [-] message from master: attached buildbot # [ 28.850393] sshd-session[911]: Accepted publickey for root from ::1 port 33836 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 28.874687] sshd-session[911]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.33 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 28.897164] twistd[851]: 2026-07-26T05:28:38+0000 [-] BuildMaster is running buildbot # [ 28.929894] systemd-logind[413]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 28.941502] systemd[1]: Created slice Slice /user/0. buildbot # [ 28.944226] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 29.022903] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 29.025221] systemd[1]: Starting User Manager for UID 0... buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.16 seconds) (finished: subtest: Master and worker services start, in 4.67 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 29.086392] (systemd)[925]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 29.093290] systemd-logind[413]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 11867 0 0100 266 100 266 0 0 10630 0 0100 266 100 266 0 0 9681 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.16 seconds) (finished: subtest: Project is registered, in 0.16 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot # [ 29.556096] systemd[925]: Queued start job for default target Main User Target. buildbot # [ 29.565746] systemd[925]: Created slice User Application Slice. buildbot # [ 29.568255] systemd[925]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 29.569564] systemd[925]: Reached target Paths. buildbot # [ 29.570528] systemd[925]: Reached target Timers. buildbot # [ 29.572996] systemd[925]: Starting D-Bus User Message Bus Socket... buildbot # [ 29.576830] systemd[925]: Starting Create User Files and Directories... buildbot # [ 29.633255] systemd[925]: Finished Create User Files and Directories. buildbot # [ 29.696074] systemd[925]: Listening on D-Bus User Message Bus Socket. buildbot # [ 29.700121] systemd[925]: Reached target Sockets. buildbot # [ 29.701107] systemd[925]: Reached target Basic System. buildbot # [ 29.701928] systemd[925]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 29.703526] systemd[925]: Reached target Main User Target. buildbot # [ 29.706723] systemd[925]: Startup finished in 569ms. buildbot # [ 29.708680] systemd[1]: Started User Manager for UID 0. buildbot # [ 29.710023] systemd[1]: Started Session 1 of User root. buildbot # [ 29.753050] sshd-session[954]: Received disconnect from ::1 port 33836:11: disconnected by user buildbot # [ 29.754281] sshd-session[954]: Disconnected from user root ::1 port 33836 buildbot # [ 29.755216] sshd-session[911]: pam_unix(sshd:session): session closed for user root buildbot # [ 29.763827] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 29.770609] systemd-logind[413]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 29.777886] systemd-logind[413]: Removed session 1. buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.64 seconds) (finished: subtest: CLI list-schedules works, in 0.64 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # e23b401..b88cef7 master -> master buildbot # [ 29.974299] sshd-session[959]: Accepted publickey for root from ::1 port 33846 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.12 seconds) (finished: subtest: Push a new commit to trigger build, in 0.12 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 29.993563] sshd-session[959]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 30.004105] systemd-logind[413]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 30.010509] systemd[1]: Started Session 3 of User root. buildbot # [ 30.028842] twistd[852]: 2026-07-26T05:28:39+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 30.053750] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=54708) buildbot # [ 30.061779] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 [ 30.072370] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # 0 0 0 0 0 [ 30.080783] sshd-session[983]: Received disconnect from ::1 port 33846:11: disconnected by user buildbot # 0[ 30.088240] sshd-session[983]: Disconnected from user root ::1 port 33846 buildbot # [ 30.098461] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 30.099359] sshd-session[959]: pam_unix(sshd:session): session closed for user root buildbot # [ 30.102709] systemd-logind[413]: Session 3 logged out. Waiting for processes to exit. buildbot # 100 51 100 [ 30.108923] systemd-logind[413]: Removed session 3. buildbot # 51 0 0 800 0 0100 51 100[ 30.116137] twistd[851]: 2026-07-26T05:28:39+0000 [-] bot attached buildbot # 51 0 0 751 0 0100 51 100 51 0 0 649 0 [ 30.124110] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 30.128087] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 30.129672] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 30.131235] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds) buildbot # [ 30.167568] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 30.193710] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 30.195277] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 30.230297] twistd[851]: 2026-07-26T05:28:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 30.231903] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.253446] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.254654] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.255760] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.275056] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.276462] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.284605] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.286921] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] message from master: attached buildbot # [ 30.302959] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 30.306793] twistd[852]: 2026-07-26T05:28:39+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # [ 30.313369] twistd[851]: 2026-07-26T05:28:39+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2041 0 0100 51 100 51 0 0 1780 0 0100 51 100 51 0 0 1566 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4021 0 0100 51 100 51 0 0 2976 0 0100 51 100 51 0 0 2398 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3771 0 0100 51 100 51 0 0 2810 0 0100 51 100 51 0 0 2312 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2490 0 0100 51 100 51 0 0 2050 0 0100 51 100 51 0 0 1784 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2685 0 0100 51 100 51 0 0 2185 0 0100 51 100 51 0 0 1885 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3223 0 0100 51 100 51 0 0 2369 0 0100 51 100 51 0 0 1938 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4114 0 0100 51 100 51 0 0 2739 0 0100 51 100 51 0 0 2313 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 38.796927] sshd-session[1025]: Accepted publickey for root from ::1 port 41652 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.819399] sshd-session[1025]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.837549] systemd-logind[413]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.840899] systemd[1]: Started Session 4 of User root. buildbot # [ 38.879070] sshd-session[1028]: Received disconnect from ::1 port 41652:11: disconnected by user buildbot # [ 38.881537] sshd-session[1028]: Disconnected from user root ::1 port 41652 buildbot # [ 38.884302] sshd-session[1025]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.895100] systemd[1]: session-4.scope: Deactivated successfully. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 38.902530] systemd-logind[413]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 38.905219] systemd-logind[413]: Removed session 4. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2115 0 0100 51 100 51 0 0 1711 0 0100 51 100 51 0 0 1567 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 39.121325] sshd-session[1036]: Accepted publickey for root from ::1 port 41662 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 39.144355] sshd-session[1036]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 39.156665] systemd-logind[413]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 39.165124] systemd[1]: Started Session 5 of User root. buildbot # [ 39.211376] sshd-session[1039]: Received disconnect from ::1 port 41662:11: disconnected by user buildbot # [ 39.214082] sshd-session[1039]: Disconnected from user root ::1 port 41662 buildbot # [ 39.217196] sshd-session[1036]: pam_unix(sshd:session): session closed for user root buildbot # [ 39.221592] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 39.226623] systemd-logind[413]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 39.230296] systemd-logind[413]: Removed session 5. buildbot # [ 39.237168] twistd[851]: 2026-07-26T05:28:48+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2899 0 0100 51 100 51 0 0 2354 0 0100 51 100 51 0 0 1961 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3947 0 0100 51 100 51 0 0 2887 0 0100 51 100 51 0 0 2318 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3688 0 0100 51 100 51 0 0 2716 0 0100 51 100 51 0 0 2190 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4408 0 0100 51 100 51 0 0 3201 0 0100 51 100 51 0 0 2554 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3328 0 0100 51 100 51 0 0 2547 0 0100 51 100 51 0 0 2084 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4394 0 0100 51 100 51 0 0 3212 0 0100 51 100 51 0 0 2569 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4191 0 0100 51 100 51 0 0 3065 0 0100 51 100 51 0 0 2459 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3572 0 0100 51 100 51 0 0 2618 0 0100 51 100 51 0 0 2107 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 48.796811] sshd-session[1078]: Accepted publickey for root from ::1 port 59364 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 48.819344] sshd-session[1078]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 48.845540] systemd-logind[413]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.854353] systemd[1]: Started Session 6 of User root. buildbot # % Total [ 48.903909] sshd-session[1084]: Received disconnect from ::1 port 59364:11: disconnected by user buildbot # % Received % Xferd Average Speed Time Time[ 48.908778] sshd-session[1084]: Disconnected from user root ::1 port 59364 buildbot # Time Current buildbot # [ 48.912494] sshd-session[1078]: pam_unix(sshd:session): session closed for user root buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 [ 48.928532] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 48.933617] systemd-logind[413]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 48.935019] systemd-logind[413]: Removed session 6. buildbot # 0 0 0100 51 100 51 0 0 933 0 0100 51 100 51 0 0 887 0 0100 51 100 51 0 0 798 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 49.148737] sshd-session[1089]: Accepted publickey for root from ::1 port 59376 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 49.167929] sshd-session[1089]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 49.182630] systemd-logind[413]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 49.189385] systemd[1]: Started Session 7 of User root. buildbot # [ 49.238621] sshd-session[1092]: Received disconnect from ::1 port 59376:11: disconnected by user buildbot # [ 49.241104] sshd-session[1092]: Disconnected from user root ::1 port 59376 buildbot # [ 49.242606] sshd-session[1089]: pam_unix(sshd:session): session closed for user root buildbot # [ 49.249247] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 49.256410] systemd-logind[413]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 49.257794] systemd-logind[413]: Removed session 7. buildbot # [ 49.263532] twistd[851]: 2026-07-26T05:28:58+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2366 0 0100 51 100 51 0 0 1972 0 0100 51 100 51 0 0 1730 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4387 0 0100 51 100 51 0 0 3201 0 0100 51 100 51 0 0 2563 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2318 0 0100 51 100 51 0 0 1908 0 0100 51 100 51 0 0 1630 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4454 0 0100 51 100 51 0 0 3145 0 0100 51 100 51 0 0 2526 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3431 0 0100 51 100 51 0 0 2647 0 0100 51 100 51 0 0 2195 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3690 0 0100 51 100 51 0 0 2700 0 0100 51 100 51 0 0 2202 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4159 0 0100 51 100 51 0 0 3011 0 0100 51 100 51 0 0 2442 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2278 0 0100 51 100 51 0 0 1863 0 0100 51 100 51 0 0 1583 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 58.793723] sshd-session[1128]: Accepted publickey for root from ::1 port 35198 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 58.837473] sshd-session[1128]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 58.856557] systemd-logind[413]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 58.863058] systemd[1]: Started Session 8 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 [ 58.915897] sshd-session[1134]: Received disconnect from ::1 port 35198:11: disconnected by user buildbot # 0 0 0 0 [ 58.929448] sshd-session[1134]: Disconnected from user root ::1 port 35198 buildbot # [ 58.931126] systemd[1]: session-8.scope: Deactivated successfully. buildbot # 0 0 0 0[ 58.948363] sshd-session[1128]: pam_unix(sshd:session): session closed for user root buildbot # [ 58.949862] systemd-logind[413]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 58.951298] systemd-logind[413]: Removed session 8. buildbot # 100 51 100 51 0 0 655 0 0100 51 100 51 0 0 632 0 0100 51 100 51 0 0 584 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds) buildbot # [ 59.165537] sshd-session[1139]: Accepted publickey for root from ::1 port 35202 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 59.186172] sshd-session[1139]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 59.200800] systemd-logind[413]: New session '9' of user 'root' with class 'user' and type 'tty'. buildbot # [ 59.209607] systemd[1]: Started Session 9 of User root. buildbot # [ 59.261675] sshd-session[1142]: Received disconnect from ::1 port 35202:11: disconnected by user buildbot # [ 59.264148] sshd-session[1142]: Disconnected from user root ::1 port 35202 buildbot # [ 59.265586] sshd-session[1139]: pam_unix(sshd:session): session closed for user root buildbot # [ 59.272174] systemd[1]: session-9.scope: Deactivated successfully. buildbot # [ 59.276463] systemd-logind[413]: Session 9 logged out. Waiting for processes to exit. buildbot # [ 59.281163] systemd-logind[413]: Removed session 9. buildbot # [ 59.287119] twistd[851]: 2026-07-26T05:29:08+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2265 0 0100 51 100 51 0 0 1924 0 0100 51 100 51 0 0 1687 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2953 0 0100 51 100 51 0 0 2387 0 0100 51 100 51 0 0 2013 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3687 0 0100 51 100 51 0 0 2702 0 0100 51 100 51 0 0 2173 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4460 0 0100 51 100 51 0 0 3189 0 0100 51 100 51 0 0 2556 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3266 0 0100 51 100 51 0 0 2556 0 0100 51 100 51 0 0 2137 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2428 0 0100 51 100 51 0 0 1993 0 0100 51 100 51 0 0 1730 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3851 0 0100 51 100 51 0 0 2889 0 0100 51 100 51 0 0 2358 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3933 0 0100 51 100 51 0 0 2701 0 0100 51 100 51 0 0 2150 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 68.789682] sshd-session[1178]: Accepted publickey for root from ::1 port 37358 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 68.814098] sshd-session[1178]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 68.833765] systemd-logind[413]: New session '10' of user 'root' with class 'user' and type 'tty'. buildbot # [ 68.847715] systemd[1]: Started Session 10 of User root. buildbot # [ 68.889743] sshd-session[1184]: Received disconnect from ::1 port 37358:11: disconnected by user buildbot # [ 68.895354] sshd-session[1184]: Disconnected from user root ::1 port 37358 buildbot # [ 68.897340] sshd-session[1178]: pam_unix(sshd:session): session closed for user root buildbot # [ 68.904381] systemd[1]: session-10.scope: Deactivated successfully. buildbot # [ 68.905351] systemd-logind[413]: Session 10 logged out. Waiting for processes to exit. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dl[ 68.920169] systemd-logind[413]: Removed session 10. buildbot # oad Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1378 0 0100 51 100 51 0 0 1219 0 0100 51 100 51 0 0 1072 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot # [ 69.127764] sshd-session[1189]: Accepted publickey for root from ::1 port 37368 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 69.147679] sshd-session[1189]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 69.164591] systemd-logind[413]: New session '11' of user 'root' with class 'user' and type 'tty'. buildbot # [ 69.173324] systemd[1]: Started Session 11 of User root. buildbot # [ 69.225117] sshd-session[1192]: Received disconnect from ::1 port 37368:11: disconnected by user buildbot # [ 69.227616] sshd-session[1192]: Disconnected from user root ::1 port 37368 buildbot # [ 69.230617] sshd-session[1189]: pam_unix(sshd:session): session closed for user root buildbot # [ 69.235650] systemd[1]: session-11.scope: Deactivated successfully. buildbot # [ 69.240557] systemd-logind[413]: Session 11 logged out. Waiting for processes to exit. buildbot # [ 69.246788] systemd-logind[413]: Removed session 11. buildbot # [ 69.251659] twistd[851]: 2026-07-26T05:29:18+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2916 0 0100 51 100 51 0 0 2283 0 0100 51 100 51 0 0 1913 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4388 0 0100 51 100 51 0 0 3182 0 0100 51 100 51 0 0 2546 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4179 0 0100 51 100 51 0 0 2923 0 0100 51 100 51 0 0 2347 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4514 0 0100 51 100 51 0 0 3177 0 0100 51 100 51 0 0 2546 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2279 0 0100 51 100 51 0 0 1934 0 0100 51 100 51 0 0 1700 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3842 0 0100 51 100 51 0 0 2813 0 0100 51 100 51 0 0 2255 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4347 0 0100 51 100 51 0 0 3078 0 0100 51 100 51 0 0 2471 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4372 0 0100 51 100 51 0 0 2985 0 0100 51 100 51 0 0 2385 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 78.812814] sshd-session[1229]: Accepted publickey for root from ::1 port 43660 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 78.836128] sshd-session[1229]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 78.857645] systemd-logind[413]: New session '12' of user 'root' with class 'user' and type 'tty'. buildbot # [ 78.864403] systemd[1]: Started Session 12 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1553 0 0100 51 100 51 0 0 1384 0 0100 51 100 51 0 0 1022 0 0 buildbot # [ 78.933110] sshd-session[1235]: Received disconnect from ::1 port 43660:11: disconnected by user buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 78.937682] sshd-session[1235]: Disconnected from user root ::1 port 43660 buildbot # [ 78.941619] sshd-session[1229]: pam_unix(sshd:session): session closed for user root buildbot # [ 78.956224] systemd[1]: session-12.scope: Deactivated successfully. buildbot # [ 78.957341] systemd-logind[413]: Session 12 logged out. Waiting for processes to exit. buildbot # [ 78.958619] systemd-logind[413]: Removed session 12. buildbot # [ 79.153424] sshd-session[1240]: Accepted publickey for root from ::1 port 43662 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 79.173012] sshd-session[1240]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 79.187989] systemd-logind[413]: New session '13' of user 'root' with class 'user' and type 'tty'. buildbot # [ 79.193193] systemd[1]: Started Session 13 of User root. buildbot # [ 79.240782] sshd-session[1243]: Received disconnect from ::1 port 43662:11: disconnected by user buildbot # [ 79.243162] sshd-session[1243]: Disconnected from user root ::1 port 43662 buildbot # [ 79.245941] sshd-session[1240]: pam_unix(sshd:session): session closed for user root buildbot # [ 79.251614] systemd[1]: session-13.scope: Deactivated successfully. buildbot # [ 79.258867] systemd-logind[413]: Session 13 logged out. Waiting for processes to exit. buildbot # [ 79.261997] systemd-logind[413]: Removed session 13. buildbot # [ 79.266571] twistd[851]: 2026-07-26T05:29:28+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2411 0 0100 51 100 51 0 0 1941 0 0100 51 100 51 0 0 1654 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4442 0 0100 51 100 51 0 0 3221 0 0100 51 100 51 0 0 2565 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4236 0 0100 51 100 51 0 0 3118 0 0100 51 100 51 0 0 2509 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4226 0 0100 51 100 51 0 0 3109 0 0100 51 100 51 0 0 2490 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4040 0 0100 51 100 51 0 0 2954 0 0100 51 100 51 0 0 2309 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2562 0 0100 51 100 51 0 0 1990 0 0100 51 100 51 0 0 1689 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3968 0 0100 51 100 51 0 0 2985 0 0100 51 100 51 0 0 2431 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4086 0 0100 51 100 51 0 0 2992 0 0100 51 100 51 0 0 2416 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 88.808848] sshd-session[1279]: Accepted publickey for root from ::1 port 60718 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 88.831999] sshd-session[1279]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 88.847475] systemd-logind[413]: New session '14' of user 'root' with class 'user' and type 'tty'. buildbot # [ 88.853227] systemd[1]: Started Session 14 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2145 0 0100 51 100 51 0 0 1450 0 [ 88.910320] sshd-session[1285]: Received disconnect from ::1 port 60718:11: disconnected by user buildbot # 0100 51 100 51 0 0 1108 0 0 buildbot # [ 88.917441] sshd-session[1285]: Disconnected from user root ::1 port 60718 buildbot # [ 88.924791] sshd-session[1279]: pam_unix(sshd:session): session closed for user root buildbot # [ 88.926062] systemd[1]: session-14.scope: Deactivated successfully. buildbot # [ 88.927070] systemd-logind[413]: Session 14 logged out. Waiting for processes to exit. buildbot # [ 88.940362] systemd-logind[413]: Removed session 14. buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 89.135150] sshd-session[1290]: Accepted publickey for root from ::1 port 60724 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 89.153837] sshd-session[1290]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 89.167385] systemd-logind[413]: New session '15' of user 'root' with class 'user' and type 'tty'. buildbot # [ 89.173106] systemd[1]: Started Session 15 of User root. buildbot # [ 89.219564] sshd-session[1293]: Received disconnect from ::1 port 60724:11: disconnected by user buildbot # [ 89.222178] sshd-session[1293]: Disconnected from user root ::1 port 60724 buildbot # [ 89.223568] sshd-session[1290]: pam_unix(sshd:session): session closed for user root buildbot # [ 89.229746] systemd[1]: session-15.scope: Deactivated successfully. buildbot # [ 89.235122] systemd-logind[413]: Session 15 logged out. Waiting for processes to exit. buildbot # [ 89.239644] systemd-logind[413]: Removed session 15. buildbot # [ 89.249306] twistd[851]: 2026-07-26T05:29:38+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2681 0 0100 51 100 51 0 0 2061 0 0100 51 100 51 0 0 1730 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4269 0 0100 51 100 51 0 0 3129 0 0100 51 100 51 0 0 2503 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4304 0 0100 51 100 51 0 0 3132 0 0100 51 100 51 0 0 2405 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3332 0 0100 51 100 51 0 0 2537 0 0100 51 100 51 0 0 2111 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2615 0 0100 51 100 51 0 0 2183 0 0100 51 100 51 0 0 1880 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3138 0 0100 51 100 51 0 0 2415 0 0100 51 100 51 0 0 2006 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3480 0 0100 51 100 51 0 0 2653 0 0100 51 100 51 0 0 2207 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4208 0 0100 51 100 51 0 0 2917 0 0100 51 100 51 0 0 2320 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 98.810785] sshd-session[1330]: Accepted publickey for root from ::1 port 50580 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 98.837075] sshd-session[1330]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 98.857556] systemd-logind[413]: New session '16' of user 'root' with class 'user' and type 'tty'. buildbot # [ 98.865843] systemd[1]: Started Session 16 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1620 0 0100 51 100 51 0 0 1177 0 0100 51 100 51 0 0 989 0 0[ 98.940357] sshd-session[1336]: Received disconnect from ::1 port 50580:11: disconnected by user buildbot # buildbot # [ 98.946283] sshd-session[1336]: Disconnected from user root ::1 port 50580 buildbot # [ 98.960292] sshd-session[1330]: pam_unix(sshd:session): session closed for user root buildbot # [ 98.961730] systemd[1]: session-16.scope: Deactivated successfully. buildbot # [ 98.962859] systemd-logind[413]: Session 16 logged out. Waiting for processes to exit. buildbot # [ 98.964423] systemd-logind[413]: Removed session 16. buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds) buildbot # [ 99.161601] sshd-session[1341]: Accepted publickey for root from ::1 port 50592 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 99.184682] sshd-session[1341]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 99.200219] systemd-logind[413]: New session '17' of user 'root' with class 'user' and type 'tty'. buildbot # [ 99.208648] systemd[1]: Started Session 17 of User root. buildbot # [ 99.261217] sshd-session[1344]: Received disconnect from ::1 port 50592:11: disconnected by user buildbot # [ 99.265097] sshd-session[1344]: Disconnected from user root ::1 port 50592 buildbot # [ 99.267515] sshd-session[1341]: pam_unix(sshd:session): session closed for user root buildbot # [ 99.273415] systemd[1]: session-17.scope: Deactivated successfully. buildbot # [ 99.276752] systemd-logind[413]: Session 17 logged out. Waiting for processes to exit. buildbot # [ 99.281042] systemd-logind[413]: Removed session 17. buildbot # [ 99.287403] twistd[851]: 2026-07-26T05:29:48+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2407 0 0100 51 100 51 0 0 1994 0 0100 51 100 51 0 0 1746 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4557 0 0100 51 100 51 0 0 3207 0 0100 51 100 51 0 0 2568 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2520 0 0100 51 100 51 0 0 1908 0 0100 51 100 51 0 0 1559 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4229 0 0100 51 100 51 0 0 3088 0 0100 51 100 51 0 0 2473 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3861 0 0100 51 100 51 0 0 2903 0 0100 51 100 51 0 0 2372 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2432 0 0100 51 100 51 0 0 2005 0 0100 51 100 51 0 0 1742 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4292 0 0100 51 100 51 0 0 3086 0 0100 51 100 51 0 0 2474 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2289 0 0100 51 100 51 0 0 1862 0 0100 51 100 51 0 0 1594 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 108.799108] sshd-session[1380]: Accepted publickey for root from ::1 port 60160 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 108.839185] sshd-session[1380]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 108.856510] systemd-logind[413]: New session '18' of user 'root' with class 'user' and type 'tty'. buildbot # [ 108.863074] systemd[1]: Started Session 18 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 108.912321] sshd-session[1386]: Received disconnect from ::1 port 60160:11: disconnected by user buildbot # [ 108.913632] sshd-session[1386]: Disconnected from user root ::1 port 60160 buildbot # [ 108.914633] sshd-session[1380]: pam_unix(sshd:session): session closed for user root buildbot # 100 51 100 51 0 0 1737 0 0100 51 100 51 0 0 1401 [ 108.929586] systemd[1]: session-18.scope: Deactivated successfully. buildbot # [ 108.930566] systemd-logind[413]: Session 18 logged out. Waiting for processes to exit. buildbot # [ 108.931705] systemd-logind[413]: Removed session 18. buildbot # 0 0100 51 100 51 0 0 1045 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 109.137619] sshd-session[1391]: Accepted publickey for root from ::1 port 60170 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 109.156956] sshd-session[1391]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 109.171731] systemd-logind[413]: New session '19' of user 'root' with class 'user' and type 'tty'. buildbot # [ 109.177179] systemd[1]: Started Session 19 of User root. buildbot # [ 109.223179] sshd-session[1394]: Received disconnect from ::1 port 60170:11: disconnected by user buildbot # [ 109.225816] sshd-session[1394]: Disconnected from user root ::1 port 60170 buildbot # [ 109.227059] sshd-session[1391]: pam_unix(sshd:session): session closed for user root buildbot # [ 109.233620] systemd[1]: session-19.scope: Deactivated successfully. buildbot # [ 109.239208] systemd-logind[413]: Session 19 logged out. Waiting for processes to exit. buildbot # [ 109.244289] systemd-logind[413]: Removed session 19. buildbot # [ 109.249331] twistd[851]: 2026-07-26T05:29:58+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3422 0 0100 51 100 51 0 0 2620 0 0100 51 100 51 0 0 2158 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4185 0 0100 51 100 51 0 0 3049 0 0100 51 100 51 0 0 2443 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2994 0 0100 51 100 51 0 0 2272 0 0100 51 100 51 0 0 1847 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4327 0 0100 51 100 51 0 0 3129 0 0100 51 100 51 0 0 2511 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4228 0 0100 51 100 51 0 0 3098 0 0100 51 100 51 0 0 2483 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2861 0 0100 51 100 51 0 0 2337 0 0100 51 100 51 0 0 2026 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4276 0 0100 51 100 51 0 0 3124 0 0100 51 100 51 0 0 2505 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1555 0 0100 51 100 51 0 0 1346 0 0100 51 100 51 0 0 1202 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 118.797872] sshd-session[1431]: Accepted publickey for root from ::1 port 46112 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 118.839234] sshd-session[1431]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 118.859492] systemd-logind[413]: New session '20' of user 'root' with class 'user' and type 'tty'. buildbot # [ 118.865288] systemd[1]: Started Session 20 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 118.927583] sshd-session[1437]: Received disconnect from ::1 port 46112:11: disconnected by user buildbot # [ 118.936734] sshd-session[1437]: Disconnected from user root ::1 port 46112 buildbot # 100 51 100 51 0 0 1044[ 118.952072] sshd-session[1431]: pam_unix(sshd:session): session closed for user root buildbot # [ 118.953576] systemd[1]: session-20.scope: Deactivated successfully. buildbot # [ 118.954786] systemd-logind[413]: Session 20 logged out. Waiting for processes to exit. buildbot # 0 0100 51 100 51 0 0 790 0 [ 118.965191] systemd-logind[413]: Removed session 20. buildbot # 0100 51 100 51 0 0 691 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds) buildbot # [ 119.165097] sshd-session[1442]: Accepted publickey for root from ::1 port 46118 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 119.186652] sshd-session[1442]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 119.200402] systemd-logind[413]: New session '21' of user 'root' with class 'user' and type 'tty'. buildbot # [ 119.213397] systemd[1]: Started Session 21 of User root. buildbot # [ 119.264249] sshd-session[1445]: Received disconnect from ::1 port 46118:11: disconnected by user buildbot # [ 119.266866] sshd-session[1445]: Disconnected from user root ::1 port 46118 buildbot # [ 119.270989] sshd-session[1442]: pam_unix(sshd:session): session closed for user root buildbot # [ 119.274725] systemd[1]: session-21.scope: Deactivated successfully. buildbot # [ 119.279647] systemd-logind[413]: Session 21 logged out. Waiting for processes to exit. buildbot # [ 119.285857] systemd-logind[413]: Removed session 21. buildbot # [ 119.291030] twistd[851]: 2026-07-26T05:30:08+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3462 0 0100 51 100 51 0 0 2687 0 0100 51 100 51 0 0 2221 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4087 0 0100 51 100 51 0 0 2955 0 0100 51 100 51 0 0 2388 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3645 0 0100 51 100 51 0 0 2677 0 0100 51 100 51 0 0 2150 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3408 0 0100 51 100 51 0 0 2603 0 0100 51 100 51 0 0 2168 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2536 0 0100 51 100 51 0 0 2118 0 0100 51 100 51 0 0 1837 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4411 0 0100 51 100 51 0 0 3071 0 0100 51 100 51 0 0 2441 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4015 0 0100 51 100 51 0 0 2954 0 0100 51 100 51 0 0 2375 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3849 0 0100 51 100 51 0 0 2813 0 0100 51 100 51 0 0 2259 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 128.797788] sshd-session[1481]: Accepted publickey for root from ::1 port 59180 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 128.842350] sshd-session[1481]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 128.860883] systemd-logind[413]: New session '22' of user 'root' with class 'user' and type 'tty'. buildbot # [ 128.871292] systemd[1]: Started Session 22 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 128.921958] sshd-session[1487]: Received disconnect from ::1 port 59180:11: disconnected by user buildbot # [ 128.923282] sshd-session[1487]: Disconnected from user root ::1 port 59180 buildbot # 100 5[ 128.938942] sshd-session[1481]: pam_unix(sshd:session): session closed for user root buildbot # 1 100 51 0 0 1668 0 0100 51 100 51 0 0 1184 0 [ 128.944782] systemd[1]: session-22.scope: Deactivated successfully. buildbot # [ 128.949389] systemd-logind[413]: Session 22 logged out. Waiting for processes to exit. buildbot # [ 128.950595] systemd-logind[413]: Removed session 22. buildbot # 0100 51 100 51 0 0 921 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds) buildbot # [ 129.149357] sshd-session[1492]: Accepted publickey for root from ::1 port 59192 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 129.171428] sshd-session[1492]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 129.186878] systemd-logind[413]: New session '23' of user 'root' with class 'user' and type 'tty'. buildbot # [ 129.193382] systemd[1]: Started Session 23 of User root. buildbot # [ 129.244177] sshd-session[1495]: Received disconnect from ::1 port 59192:11: disconnected by user buildbot # [ 129.247556] sshd-session[1495]: Disconnected from user root ::1 port 59192 buildbot # [ 129.251416] sshd-session[1492]: pam_unix(sshd:session): session closed for user root buildbot # [ 129.256305] systemd[1]: session-23.scope: Deactivated successfully. buildbot # [ 129.260570] systemd-logind[413]: Session 23 logged out. Waiting for processes to exit. buildbot # [ 129.263967] systemd-logind[413]: Removed session 23. buildbot # [ 129.270066] twistd[851]: 2026-07-26T05:30:18+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3633 0 0100 51 100 51 0 0 2798 0 0100 51 100 51 0 0 2304 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2704 0 0100 51 100 51 0 0 2195 0 0100 51 100 51 0 0 1895 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3527 0 0100 51 100 51 0 0 2590 0 0100 51 100 51 0 0 2084 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3245 0 0100 51 100 51 0 0 2507 0 0100 51 100 51 0 0 2101 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4288 0 0100 51 100 51 0 0 2931 0 0100 51 100 51 0 0 2375 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4336 0 0100 51 100 51 0 0 3152 0 0100 51 100 51 0 0 2520 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4461 0 0100 51 100 51 0 0 3233 0 0100 51 100 51 0 0 2576 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2763 0 0100 51 100 51 0 0 2087 0 0100 51 100 51 0 0 1725 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 138.795365] sshd-session[1532]: Accepted publickey for root from ::1 port 48460 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 138.834257] sshd-session[1532]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 138.852513] systemd-logind[413]: New session '24' of user 'root' with class 'user' and type 'tty'. buildbot # [ 138.859358] systemd[1]: Started Session 24 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 [ 138.917620] sshd-session[1538]: Received disconnect from ::1 port 48460:11: disconnected by user buildbot # [ 138.919543] sshd-session[1538]: Disconnected from user root ::1 port 48460 buildbot # 0[ 138.938477] sshd-session[1532]: pam_unix(sshd:session): session closed for user root buildbot # [ 138.939915] systemd[1]: session-24.scope: Deactivated successfully. buildbot # [ 138.944331] systemd-logind[413]: Session 24 logged out. Waiting for processes to exit. buildbot # [ 138.946622] systemd-logind[413]: Removed session 24. buildbot # 100 51 100 51 0 0 733 0 0100 51 100 51 0 0 663 0 0100 51 100 51 0 0 632 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds) buildbot # [ 139.151441] sshd-session[1543]: Accepted publickey for root from ::1 port 48466 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 139.172859] sshd-session[1543]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 139.189414] systemd-logind[413]: New session '25' of user 'root' with class 'user' and type 'tty'. buildbot # [ 139.197175] systemd[1]: Started Session 25 of User root. buildbot # [ 139.248500] sshd-session[1546]: Received disconnect from ::1 port 48466:11: disconnected by user buildbot # [ 139.250845] sshd-session[1546]: Disconnected from user root ::1 port 48466 buildbot # [ 139.252846] sshd-session[1543]: pam_unix(sshd:session): session closed for user root buildbot # [ 139.259799] systemd[1]: session-25.scope: Deactivated successfully. buildbot # [ 139.264752] systemd-logind[413]: Session 25 logged out. Waiting for processes to exit. buildbot # [ 139.267025] systemd-logind[413]: Removed session 25. buildbot # [ 139.273499] twistd[851]: 2026-07-26T05:30:28+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2802 0 0100 51 100 51 0 0 2284 0 0100 51 100 51 0 0 1955 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4404 0 0100 51 100 51 0 0 3112 0 0100 51 100 51 0 0 2489 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3338 0 0100 51 100 51 0 0 2511 0 0100 51 100 51 0 0 2055 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4477 0 0100 51 100 51 0 0 3242 0 0100 51 100 51 0 0 2586 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4463 0 0100 51 100 51 0 0 3241 0 0100 51 100 51 0 0 2448 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4403 0 0100 51 100 51 0 0 3206 0 0100 51 100 51 0 0 2557 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4241 0 0100 51 100 51 0 0 3080 0 0100 51 100 51 0 0 2465 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2105 0 0100 51 100 51 0 0 1821 0 0100 51 100 51 0 0 1617 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 6652 0 0100 51 100 51 0 0 4757 0 0100 51 100 51 0 0 3757 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot # [ 148.885832] sshd-session[1582]: Accepted publickey for root from ::1 port 49796 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 148.901701] sshd-session[1582]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 148.913108] systemd-logind[413]: New session '26' of user 'root' with class 'user' and type 'tty'. buildbot # [ 148.917044] systemd[1]: Started Session 26 of User root. buildbot # [ 148.949024] sshd-session[1588]: Received disconnect from ::1 port 49796:11: disconnected by user buildbot # [ 148.951071] sshd-session[1588]: Disconnected from user root ::1 port 49796 buildbot # [ 148.953133] sshd-session[1582]: pam_unix(sshd:session): session closed for user root buildbot # [ 148.964157] systemd[1]: session-26.scope: Deactivated successfully. buildbot # [ 148.970291] systemd-logind[413]: Session 26 logged out. Waiting for processes to exit. buildbot # [ 148.972315] systemd-logind[413]: Removed session 26. buildbot # [ 149.161789] sshd-session[1593]: Accepted publickey for root from ::1 port 49800 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 149.182671] sshd-session[1593]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 149.199118] systemd-logind[413]: New session '27' of user 'root' with class 'user' and type 'tty'. buildbot # [ 149.204572] systemd[1]: Started Session 27 of User root. buildbot # [ 149.251875] sshd-session[1596]: Received disconnect from ::1 port 49800:11: disconnected by user buildbot # [ 149.254365] sshd-session[1596]: Disconnected from user root ::1 port 49800 buildbot # [ 149.255598] sshd-session[1593]: pam_unix(sshd:session): session closed for user root buildbot # [ 149.263293] systemd[1]: session-27.scope: Deactivated successfully. buildbot # [ 149.269792] systemd-logind[413]: Session 27 logged out. Waiting for processes to exit. buildbot # [ 149.271255] systemd-logind[413]: Removed session 27. buildbot # [ 149.277005] twistd[851]: 2026-07-26T05:30:38+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2430 0 0100 51 100 51 0 0 2011 0 0100 51 100 51 0 0 1756 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4209 0 0100 51 100 51 0 0 2945 0 0100 51 100 51 0 0 2341 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3506 0 0100 51 100 51 0 0 2645 0 0100 51 100 51 0 0 2188 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4399 0 0100 51 100 51 0 0 3014 0 0100 51 100 51 0 0 2405 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4621 0 0100 51 100 51 0 0 3293 0 0100 51 100 51 0 0 2607 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4615 0 0100 51 100 51 0 0 3149 0 0100 51 100 51 0 0 2489 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2651 0 0100 51 100 51 0 0 2155 0 0100 51 100 51 0 0 1857 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3406 0 0100 51 100 51 0 0 2574 0 0100 51 100 51 0 0 2116 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4653 0 0100 51 100 51 0 0 3802 0 0100 51 100 51 0 0 2594 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 158.793006] sshd-session[1633]: Accepted publickey for root from ::1 port 41630 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 158.811785] sshd-session[1633]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 158.827003] systemd-logind[413]: New session '28' of user 'root' with class 'user' and type 'tty'. buildbot # [ 158.832881] systemd[1]: Started Session 28 of User root. buildbot # [ 158.871478] sshd-session[1639]: Received disconnect from ::1 port 41630:11: disconnected by user buildbot # [ 158.874282] sshd-session[1639]: Disconnected from user root ::1 port 41630 buildbot # [ 158.877599] sshd-session[1633]: pam_unix(sshd:session): session closed for user root buildbot # [ 158.891614] systemd[1]: session-28.scope: Deactivated successfully. buildbot # [ 158.898155] systemd-logind[413]: Session 28 logged out. Waiting for processes to exit. buildbot # [ 158.900598] systemd-logind[413]: Removed session 28. buildbot # [ 159.089030] sshd-session[1644]: Accepted publickey for root from ::1 port 41638 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 159.108709] sshd-session[1644]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 159.123965] systemd-logind[413]: New session '29' of user 'root' with class 'user' and type 'tty'. buildbot # [ 159.128534] systemd[1]: Started Session 29 of User root. buildbot # [ 159.177407] sshd-session[1647]: Received disconnect from ::1 port 41638:11: disconnected by user buildbot # [ 159.179649] sshd-session[1647]: Disconnected from user root ::1 port 41638 buildbot # [ 159.182302] sshd-session[1644]: pam_unix(sshd:session): session closed for user root buildbot # [ 159.189443] systemd[1]: session-29.scope: Deactivated successfully. buildbot # [ 159.193273] systemd-logind[413]: Session 29 logged out. Waiting for processes to exit. buildbot # [ 159.197248] systemd-logind[413]: Removed session 29. buildbot # [ 159.207196] twistd[851]: 2026-07-26T05:30:48+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1977 0 0100 51 100 51 0 0 1658 0 0100 51 100 51 0 0 1464 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2573 0 0100 51 100 51 0 0 2112 0 0100 51 100 51 0 0 1833 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4369 0 0100 51 100 51 0 0 2925 0 0100 51 100 51 0 0 2344 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4745 0 0100 51 100 51 0 0 3260 0 0100 51 100 51 0 0 2582 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4457 0 0100 51 100 51 0 0 3198 0 0100 51 100 51 0 0 2536 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3273 0 0100 51 100 51 0 0 2393 0 0100 51 100 51 0 0 1937 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4287 0 0100 51 100 51 0 0 2951 0 0100 51 100 51 0 0 2339 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4472 0 0100 51 100 51 0 0 3244 0 0100 51 100 51 0 0 2588 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4666 0 0100 51 100 51 0 0 2806 0 0100 51 100 51 0 0 1861 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds) buildbot # [ 168.825788] sshd-session[1686]: Accepted publickey for root from ::1 port 36416 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 168.848249] sshd-session[1686]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 168.865441] systemd-logind[413]: New session '30' of user 'root' with class 'user' and type 'tty'. buildbot # [ 168.868952] systemd[1]: Started Session 30 of User root. buildbot # [ 168.909228] sshd-session[1689]: Received disconnect from ::1 port 36416:11: disconnected by user buildbot # [ 168.911807] sshd-session[1689]: Disconnected from user root ::1 port 36416 buildbot # [ 168.922375] sshd-session[1686]: pam_unix(sshd:session): session closed for user root buildbot # [ 168.926063] systemd[1]: session-30.scope: Deactivated successfully. buildbot # [ 168.933117] systemd-logind[413]: Session 30 logged out. Waiting for processes to exit. buildbot # [ 168.938584] systemd-logind[413]: Removed session 30. buildbot # [ 169.133449] sshd-session[1694]: Accepted publickey for root from ::1 port 36424 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 169.154033] sshd-session[1694]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 169.169414] systemd-logind[413]: New session '31' of user 'root' with class 'user' and type 'tty'. buildbot # [ 169.177257] systemd[1]: Started Session 31 of User root. buildbot # [ 169.227304] sshd-session[1697]: Received disconnect from ::1 port 36424:11: disconnected by user buildbot # [ 169.229856] sshd-session[1697]: Disconnected from user root ::1 port 36424 buildbot # [ 169.232422] sshd-session[1694]: pam_unix(sshd:session): session closed for user root buildbot # [ 169.237308] systemd[1]: session-31.scope: Deactivated successfully. buildbot # [ 169.241829] systemd-logind[413]: Session 31 logged out. Waiting for processes to exit. buildbot # [ 169.245071] systemd-logind[413]: Removed session 31. buildbot # [ 169.257295] twistd[851]: 2026-07-26T05:30:58+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2368 0 0100 51 100 51 0 0 1997 0 0100 51 100 51 0 0 1749 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3743 0 0100 51 100 51 0 0 2791 0 0100 51 100 51 0 0 2273 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2581 0 0100 51 100 51 0 0 2145 0 0100 51 100 51 0 0 1858 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3479 0 0100 51 100 51 0 0 2542 0 0100 51 100 51 0 0 2047 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4371 0 0100 51 100 51 0 0 3101 0 0100 51 100 51 0 0 2482 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2591 0 0100 51 100 51 0 0 2060 0 0100 51 100 51 0 0 1794 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3689 0 0100 51 100 51 0 0 2811 0 0100 51 100 51 0 0 2315 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4315 0 0100 51 100 51 0 0 3136 0 0100 51 100 51 0 0 2508 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2094 0 0100 51 100 51 0 0 1440 0 0100 51 100 51 0 0 1077 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds) buildbot # [ 178.805699] sshd-session[1737]: Accepted publickey for root from ::1 port 46844 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 178.828363] sshd-session[1737]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 178.845362] systemd-logind[413]: New session '32' of user 'root' with class 'user' and type 'tty'. buildbot # [ 178.849401] systemd[1]: Started Session 32 of User root. buildbot # [ 178.888882] sshd-session[1740]: Received disconnect from ::1 port 46844:11: disconnected by user buildbot # [ 178.891448] sshd-session[1740]: Disconnected from user root ::1 port 46844 buildbot # [ 178.894834] sshd-session[1737]: pam_unix(sshd:session): session closed for user root buildbot # [ 178.908553] systemd[1]: session-32.scope: Deactivated successfully. buildbot # [ 178.909902] systemd-logind[413]: Session 32 logged out. Waiting for processes to exit. buildbot # [ 178.919559] systemd-logind[413]: Removed session 32. buildbot # [ 179.113692] sshd-session[1745]: Accepted publickey for root from ::1 port 46860 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 179.134167] sshd-session[1745]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 179.148808] systemd-logind[413]: New session '33' of user 'root' with class 'user' and type 'tty'. buildbot # [ 179.161225] systemd[1]: Started Session 33 of User root. buildbot # [ 179.215800] sshd-session[1748]: Received disconnect from ::1 port 46860:11: disconnected by user buildbot # [ 179.218455] sshd-session[1748]: Disconnected from user root ::1 port 46860 buildbot # [ 179.219774] sshd-session[1745]: pam_unix(sshd:session): session closed for user root buildbot # [ 179.228259] systemd[1]: session-33.scope: Deactivated successfully. buildbot # [ 179.231506] systemd-logind[413]: Session 33 logged out. Waiting for processes to exit. buildbot # [ 179.235170] systemd-logind[413]: Removed session 33. buildbot # [ 179.242180] twistd[851]: 2026-07-26T05:31:08+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2447 0 0100 51 100 51 0 0 2070 0 0100 51 100 51 0 0 1776 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3478 0 0100 51 100 51 0 0 2537 0 0100 51 100 51 0 0 2041 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1758 0 0100 51 100 51 0 0 1508 0 0100 51 100 51 0 0 1345 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2665 0 0100 51 100 51 0 0 2175 0 0100 51 100 51 0 0 1878 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4522 0 0100 51 100 51 0 0 3197 0 0100 51 100 51 0 0 2520 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4715 0 0100 51 100 51 0 0 3333 0 0100 51 100 51 0 0 2620 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3396 0 0100 51 100 51 0 0 2513 0 0100 51 100 51 0 0 2060 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4682 0 0100 51 100 51 0 0 3201 0 0100 51 100 51 0 0 2530 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4765 0 0100 51 100 51 0 0 3354 0 0100 51 100 51 0 0 2632 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 188.758436] sshd-session[1787]: Accepted publickey for root from ::1 port 48194 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 188.779697] sshd-session[1787]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 188.796215] systemd-logind[413]: New session '34' of user 'root' with class 'user' and type 'tty'. buildbot # [ 188.800913] systemd[1]: Started Session 34 of User root. buildbot # [ 188.840360] sshd-session[1790]: Received disconnect from ::1 port 48194:11: disconnected by user buildbot # [ 188.843276] sshd-session[1790]: Disconnected from user root ::1 port 48194 buildbot # [ 188.846792] sshd-session[1787]: pam_unix(sshd:session): session closed for user root buildbot # [ 188.858952] systemd[1]: session-34.scope: Deactivated successfully. buildbot # [ 188.868260] systemd-logind[413]: Session 34 logged out. Waiting for processes to exit. buildbot # [ 188.870741] systemd-logind[413]: Removed session 34. buildbot # [ 189.061025] sshd-session[1795]: Accepted publickey for root from ::1 port 48202 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 189.081416] sshd-session[1795]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 189.096147] systemd-logind[413]: New session '35' of user 'root' with class 'user' and type 'tty'. buildbot # [ 189.101213] systemd[1]: Started Session 35 of User root. buildbot # [ 189.149085] sshd-session[1798]: Received disconnect from ::1 port 48202:11: disconnected by user buildbot # [ 189.153381] sshd-session[1798]: Disconnected from user root ::1 port 48202 buildbot # [ 189.155966] sshd-session[1795]: pam_unix(sshd:session): session closed for user root buildbot # [ 189.161386] systemd[1]: session-35.scope: Deactivated successfully. buildbot # [ 189.166945] systemd-logind[413]: Session 35 logged out. Waiting for processes to exit. buildbot # [ 189.172774] systemd-logind[413]: Removed session 35. buildbot # [ 189.177251] twistd[851]: 2026-07-26T05:31:18+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2400 0 0100 51 100 51 0 0 1988 0 0100 51 100 51 0 0 1733 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4785 0 0100 51 100 51 0 0 3149 0 0100 51 100 51 0 0 2464 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2691 0 0100 51 100 51 0 0 2220 0 0100 51 100 51 0 0 1907 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2700 0 0100 51 100 51 0 0 2222 0 0100 51 100 51 0 0 1906 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4519 0 0100 51 100 51 0 0 3176 0 0100 51 100 51 0 0 2505 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2693 0 0100 51 100 51 0 0 2188 0 0100 51 100 51 0 0 1882 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4755 0 0100 51 100 51 0 0 3212 0 0100 51 100 51 0 0 2495 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3862 0 0100 51 100 51 0 0 2813 0 0100 51 100 51 0 0 2277 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4790 0 0100 51 100 51 0 0 3369 0 0100 51 100 51 0 0 2647 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot # [ 198.790384] sshd-session[1838]: Accepted publickey for root from ::1 port 36446 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 198.812742] sshd-session[1838]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 198.829814] systemd-logind[413]: New session '36' of user 'root' with class 'user' and type 'tty'. buildbot # [ 198.841637] systemd[1]: Started Session 36 of User root. buildbot # [ 198.885523] sshd-session[1841]: Received disconnect from ::1 port 36446:11: disconnected by user buildbot # [ 198.888613] sshd-session[1841]: Disconnected from user root ::1 port 36446 buildbot # [ 198.892200] sshd-session[1838]: pam_unix(sshd:session): session closed for user root buildbot # [ 198.905134] systemd[1]: session-36.scope: Deactivated successfully. buildbot # [ 198.909717] systemd-logind[413]: Session 36 logged out. Waiting for processes to exit. buildbot # [ 198.917306] systemd-logind[413]: Removed session 36. buildbot # [ 199.109073] sshd-session[1846]: Accepted publickey for root from ::1 port 36458 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 199.129575] sshd-session[1846]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 199.144627] systemd-logind[413]: New session '37' of user 'root' with class 'user' and type 'tty'. buildbot # [ 199.148545] systemd[1]: Started Session 37 of User root. buildbot # [ 199.195967] sshd-session[1849]: Received disconnect from ::1 port 36458:11: disconnected by user buildbot # [ 199.198599] sshd-session[1849]: Disconnected from user root ::1 port 36458 buildbot # [ 199.201604] sshd-session[1846]: pam_unix(sshd:session): session closed for user root buildbot # [ 199.206687] systemd[1]: session-37.scope: Deactivated successfully. buildbot # [ 199.210143] systemd-logind[413]: Session 37 logged out. Waiting for processes to exit. buildbot # [ 199.212579] systemd-logind[413]: Removed session 37. buildbot # [ 199.220930] twistd[851]: 2026-07-26T05:31:28+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2526 0 0100 51 100 51 0 0 2086 0 0100 51 100 51 0 0 1815 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3774 0 0100 51 100 51 0 0 2665 0 0100 51 100 51 0 0 2111 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3958 0 0100 51 100 51 0 0 2910 0 0100 51 100 51 0 0 2348 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2615 0 0100 51 100 51 0 0 2122 0 0100 51 100 51 0 0 1777 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2645 0 0100 51 100 51 0 0 2174 0 0100 51 100 51 0 0 1872 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4095 0 0100 51 100 51 0 0 2994 0 0100 51 100 51 0 0 2415 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4110 0 0100 51 100 51 0 0 2757 0 0100 51 100 51 0 0 2122 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4598 0 0100 51 100 51 0 0 3238 0 0100 51 100 51 0 0 2546 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4531 0 0100 51 100 51 0 0 4410 0 0100 51 100 51 0 0 4322 0 0 buildbot # [ 208.790549] sshd-session[1888]: Accepted publickey for root from ::1 port 36246 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 208.818898] sshd-session[1888]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 208.835409] systemd-logind[413]: New session '38' of user 'root' with class 'user' and type 'tty'. buildbot # [ 208.840874] systemd[1]: Started Session 38 of User root. buildbot # [ 208.880517] sshd-session[1891]: Received disconnect from ::1 port 36246:11: disconnected by user buildbot # [ 208.883289] sshd-session[1891]: Disconnected from user root ::1 port 36246 buildbot # [ 208.888505] sshd-session[1888]: pam_unix(sshd:session): session closed for user root buildbot # [ 208.899150] systemd[1]: session-38.scope: Deactivated successfully. buildbot # [ 208.904290] systemd-logind[413]: Session 38 logged out. Waiting for processes to exit. buildbot # [ 208.906880] systemd-logind[413]: Removed session 38. buildbot # [ 209.109712] sshd-session[1896]: Accepted publickey for root from ::1 port 36256 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 209.130215] sshd-session[1896]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 209.144114] systemd-logind[413]: New session '39' of user 'root' with class 'user' and type 'tty'. buildbot # [ 209.153129] systemd[1]: Started Session 39 of User root. buildbot # [ 209.204510] sshd-session[1899]: Received disconnect from ::1 port 36256:11: disconnected by user buildbot # [ 209.207140] sshd-session[1899]: Disconnected from user root ::1 port 36256 buildbot # [ 209.209963] sshd-session[1896]: pam_unix(sshd:session): session closed for user root buildbot # [ 209.215946] systemd[1]: session-39.scope: Deactivated successfully. buildbot # [ 209.220383] systemd-logind[413]: Session 39 logged out. Waiting for processes to exit. buildbot # [ 209.223944] systemd-logind[413]: Removed session 39. buildbot # [ 209.231682] twistd[851]: 2026-07-26T05:31:38+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3756 0 0100 51 100 51 0 0 3029 0 0100 51 100 51 0 0 2587 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4299 0 0100 51 100 51 0 0 3056 0 0100 51 100 51 0 0 2434 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) !!! Test "Wait for nix-eval build to complete" failed with error: "action timed out after 180.39 seconds (timeout=180)" !!! Traceback (most recent call last): !!! File "", line 51, in !!! retry(check_eval_build_complete, timeout_seconds=180) !!! !!! RequestedAssertionFailed: action timed out after 180.39 seconds (timeout=180) cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.29 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh