tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot: QEMU running (pid 12) buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot # Formatting '/build/vm-state-buildbot/tmp.U6QkbmI7DE', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: af2efc93-7f9c-4715-a339-585673223ea8 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/axl67kbhz0qqj7d3yl30h55gmidakyb0-nixos-system-buildbot-test/init regInfo=/nix/store/4pwgk88w02jpprz1sa2wjhagc9lpcjns-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/4pwgk88w02jpprz1sa2wjhagc9lpcjns-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000027] arm-pv: using stolen time PV buildbot # [ 0.000382] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000538] Console: colour dummy device 80x25 buildbot # [ 0.000545] printk: legacy console [tty0] enabled buildbot # [ 0.000724] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000730] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000806] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000938] landlock: Up and running. buildbot # [ 0.000941] Yama: becoming mindful. buildbot # [ 0.001365] LSM support for eBPF active buildbot # [ 0.001453] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001470] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002492] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003210] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003215] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004359] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004449] EFI services will not be available. buildbot # [ 0.004527] smp: Bringing up secondary CPUs ... buildbot # [ 0.004536] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004538] SMP: Total of 1 processors activated. buildbot # [ 0.004541] CPU: All CPU(s) started at EL1 buildbot # [ 0.004552] CPU features: detected: Branch Target Identification buildbot # [ 0.004556] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004562] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004565] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004569] CPU features: detected: Common not Private translations buildbot # [ 0.004572] CPU features: detected: CRC32 instructions buildbot # [ 0.004575] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004578] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004581] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004585] CPU features: detected: E0PD buildbot # [ 0.004587] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004590] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004593] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004597] CPU features: detected: Fine Grained Traps buildbot # [ 0.004601] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004605] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004608] CPU features: detected: LSE atomic instructions buildbot # [ 0.004611] CPU features: detected: Privileged Access Never buildbot # [ 0.004614] CPU features: detected: PMUv3 buildbot # [ 0.004616] CPU features: detected: RAS Extension Support buildbot # [ 0.004619] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004622] CPU features: detected: Random Number Generator buildbot # [ 0.004625] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004627] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004630] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004634] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004670] alternatives: applying system-wide alternatives buildbot # [ 0.007521] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007715] Memory: 895068K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008061] devtmpfs: initialized buildbot # [ 0.009724] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009748] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009768] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.009941] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.009945] 0 pages in range for non-PLT usage buildbot # [ 0.009946] 508320 pages in range for PLT usage buildbot # [ 0.010060] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010800] DMI not present or invalid. buildbot # [ 0.013705] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.015840] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.015981] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016157] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016178] audit: initializing netlink subsys (disabled) buildbot # [ 0.016728] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.016731] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.016734] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.016737] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.016739] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.016766] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.016776] cpuidle: using governor ladder buildbot # [ 0.016781] cpuidle: using governor menu buildbot # [ 0.016963] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.016979] ASID allocator initialised with 65536 entries buildbot # [ 0.018330] Serial: AMBA PL011 UART driver buildbot # [ 0.023447] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.023579] printk: console [ttyAMA0] enabled buildbot # [ 0.146989] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.147011] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.147016] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.147020] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.147025] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.147029] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.147033] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.147037] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.154646] fbcon: Taking over console buildbot # [ 0.154662] ACPI: Interpreter disabled. buildbot # [ 0.163681] iommu: Default domain type: Translated buildbot # [ 0.163695] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.164030] SCSI subsystem initialized buildbot # [ 0.166058] usbcore: registered new interface driver usbfs buildbot # [ 0.166096] usbcore: registered new interface driver hub buildbot # [ 0.166112] usbcore: registered new device driver usb buildbot # [ 0.166365] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.166371] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.166380] PTP clock support registered buildbot # [ 0.166428] EDAC MC: Ver: 3.0.0 buildbot # [ 0.171230] scmi_core: SCMI protocol bus registered buildbot # [ 0.172251] FPGA manager framework buildbot # [ 0.173281] vgaarb: loaded buildbot # [ 0.173931] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.174406] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.174437] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.176974] netfs: FS-Cache loaded buildbot # [ 0.177096] pnp: PnP ACPI: disabled buildbot # [ 0.185839] NET: Registered PF_INET protocol family buildbot # [ 0.186661] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.215301] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.215344] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.215367] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.215413] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.215488] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.215591] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.215645] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.215689] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.215776] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.215837] NET: Registered PF_XDP protocol family buildbot # [ 0.215856] PCI: CLS 0 bytes, default 64 buildbot # [ 0.216090] Trying to unpack rootfs image as initramfs... buildbot # [ 0.231837] kvm [1]: HYP mode not available buildbot # [ 0.327043] Initialise system trusted keyrings buildbot # [ 0.327805] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.329088] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.329879] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.358611] Key type asymmetric registered buildbot # [ 0.358629] Asymmetric key parser 'x509' registered buildbot # [ 0.358690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.360817] io scheduler mq-deadline registered buildbot # [ 0.360828] io scheduler kyber registered buildbot # [ 0.370058] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.371449] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.371800] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.371817] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.371829] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.371838] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.371857] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.371879] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.371950] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.371959] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.371965] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.371971] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.371976] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.372030] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.372461] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.372685] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.372702] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.372730] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.372746] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.373185] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.373364] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.373379] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.373408] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.373841] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.394531] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.394551] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.394581] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.395030] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.395212] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.395227] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.395255] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.395694] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.395874] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.395890] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.395919] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.396356] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.396535] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.396550] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.396578] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.397046] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.397225] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.397240] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.397268] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.397284] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.397719] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.397901] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.397930] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.422466] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.422667] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.422697] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.423074] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.423263] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.423510] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.423794] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.423811] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.423839] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.424280] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.424459] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.424474] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.424502] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.425061] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.425073] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.425079] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.425123] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.425169] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.425214] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.425260] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.425306] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.425352] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.425398] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.425444] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.425489] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.425549] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.425594] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.425615] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.425636] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.425658] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.425679] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.425700] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.425724] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.425746] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.425767] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.425789] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.425811] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.425833] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.425855] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.425876] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.425897] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.425918] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.470007] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.470045] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.470068] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.470090] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.470113] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.470144] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.470155] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.470160] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.471294] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.497546] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.507326] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.511345] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.513335] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.524506] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.527275] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.529214] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.539401] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.541442] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.544841] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.552927] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.567250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.569660] msm_serial: driver initialized buildbot # [ 0.569804] SuperH (H)SCI(F) driver initialized buildbot # [ 0.569856] STM32 USART driver initialized buildbot # [ 0.602777] loop: module loaded buildbot # [ 0.602945] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.603686] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.610509] megasas: 07.734.00.00-rc1 buildbot # [ 0.611252] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.613016] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.613041] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.614564] Using buffer write method buildbot # [ 0.614622] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.616328] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.616350] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.625923] Using buffer write method buildbot # [ 0.626415] Concatenating MTD devices: buildbot # [ 0.626420] (0): "0.flash" buildbot # [ 0.626424] (1): "0.flash" buildbot # [ 0.626428] into device "0.flash" buildbot # [ 0.831739] Freeing initrd memory: 25516K buildbot # [ 0.837430] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.840861] thunder_xcv, ver 1.0 buildbot # [ 0.840900] thunder_bgx, ver 1.0 buildbot # [ 0.840922] nicpf, ver 1.0 buildbot # [ 0.841460] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.841467] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.841494] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.841501] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.841530] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.841536] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.841557] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.841563] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.841694] sky2: driver version 1.30 buildbot # [ 0.850565] usbcore: registered new interface driver usb-storage buildbot # [ 0.850654] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.850668] usbserial: USB Serial support registered for generic buildbot # [ 0.851240] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.852360] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.852390] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.852577] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.858250] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.858278] rtc-pl031 9010000.pl031: setting system clock to 2026-08-02T05:23:20 UTC (1785648200) buildbot # [ 0.858606] i2c_dev: i2c /dev entries driver buildbot # [ 0.863549] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.863559] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.863819] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.864183] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.865790] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.869399] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.870445] hub 1-0:1.0: USB hub found buildbot # [ 0.870477] hub 1-0:1.0: 6 ports detected buildbot # [ 0.871903] usbcore: registered new interface driver usbhid buildbot # [ 0.871914] usbhid: USB HID core driver buildbot # [ 0.909435] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.911653] drop_monitor: Initializing network drop monitor service buildbot # [ 0.911809] NET: Registered PF_INET6 protocol family buildbot # [ 0.914863] Segment Routing with IPv6 buildbot # [ 0.914881] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.914912] NET: Registered PF_PACKET protocol family buildbot # [ 0.916559] 9pnet: Installing 9P2000 support buildbot # [ 0.919099] Key type dns_resolver registered buildbot # [ 0.925306] registered taskstats version 1 buildbot # [ 0.925453] Loading compiled-in X.509 certificates buildbot # [ 0.933574] Demotion targets for Node 0: null buildbot # [ 0.933672] Key type .fscrypt registered buildbot # [ 0.933679] Key type fscrypt-provisioning registered buildbot # [ 0.933766] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.933783] ima: Allocated hash algorithm: sha1 buildbot # [ 0.933802] ima: No architecture policies found buildbot # [ 0.937819] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.955918] clk: Disabling unused clocks buildbot # [ 0.955939] PM: genpd: Disabling unused power domains buildbot # [ 0.960291] Freeing unused kernel memory: 4736K buildbot # [ 0.960479] Run /init as init process buildbot # [ 0.976136] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.130006] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.282157] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.311106] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.323348] systemd[1]: Detected virtualization qemu. buildbot # [ 1.325412] systemd[1]: Detected architecture arm64. buildbot # [ 1.327441] systemd[1]: Running in initrd. buildbot # [ 1.330073] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.332908] systemd[1]: Hostname set to . buildbot # [ 1.366336] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.444557] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.451697] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.452718] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.453841] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.454857] systemd[1]: Reached target Path Units. buildbot # [ 1.455556] systemd[1]: Reached target Slice Units. buildbot # [ 1.456258] systemd[1]: Reached target Swaps. buildbot # [ 1.456893] systemd[1]: Reached target Timer Units. buildbot # [ 1.457713] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.458856] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.459858] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.460699] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.461558] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.462373] systemd[1]: Reached target Socket Units. buildbot # [ 1.464423] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.470082] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.471068] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.477604] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.487827] systemd[1]: Starting Journal Service... buildbot # [ 1.489992] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.510379] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.510448] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.529904] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.530954] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.532284] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.532979] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.533225] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.533421] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.543747] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.582482] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.583795] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.599209] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.614564] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.618869] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.619093] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.619103] [drm] features: -context_init buildbot # [ 1.619775] [drm] number of scanouts: 1 buildbot # [ 1.619793] [drm] number of cap sets: 0 buildbot # [ 1.636374] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.636396] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.640629] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.640957] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.640983] systemd[1]: Reached target Local File Systems. buildbot # [ 1.647063] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.649856] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.650080] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.678210] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.684642] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.710474] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.726304] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.724553] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.747551] systemd[1]: Started Journal Service. buildbot # [ 1.728222] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.734125] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.740295] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.744288] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.746523] systemd-udevd[81]: Using default interface naming scheme 'v260'. buildbot # [ 1.753645] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.755689] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.773533] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.792344] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.868137] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.933205] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.935746] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.610102] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.610979] systemd[1]: Reached target System Initialization. buildbot # [ 2.611795] systemd[1]: Reached target Basic System. buildbot # [ 2.755874] (udev-worker)[100]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.797573] (udev-worker)[99]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.803596] (udev-worker)[99]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.844757] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.846996] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.850151] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.891714] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.898629] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.906431] systemd[1]: Mounting /sysroot... buildbot # [ 2.968395] EXT4-fs (vda): mounted filesystem af2efc93-7f9c-4715-a339-585673223ea8 r/w with ordered data mode. Quota mode: none. buildbot # [ 2.952918] systemd[1]: Mounted /sysroot. buildbot # [ 2.954897] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.959870] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.983878] systemd-sysroot-fstab-check[121]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 2.991088] systemd[1]: Reload requested from client PID 121 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 2.995797] systemd[1]: Reloading... buildbot # [ 3.209394] systemd[1]: Reloading finished in 213 ms. buildbot # [ 3.226802] systemd-sysroot-fstab-check[121]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.230918] systemd-sysroot-fstab-check[121]: Requesting swap.target/start/replace... buildbot # [ 3.237169] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.238155] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.245626] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.246643] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.265698] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.266794] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.513048] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.526575] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.531717] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.549850] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.573588] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.576110] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.607058] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.610873] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.618402] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.630845] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.642863] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.645491] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.648909] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.184681] (udev-worker)[99]: mtd0ro: Failed to find and pin callout binary "/nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/mtd_probe": No such file or directory buildbot # [ 4.190731] (udev-worker)[99]: mtd0ro: /nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory buildbot # [ 4.221805] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.223149] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.227354] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 4.228292] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.251715] systemd-vconsole-setup[155]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 4.255137] systemd[1]: Finished Virtual Console Setup. buildbot # [ 4.515817] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 4.576536] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 4.579765] systemd[1]: Reached target Initrd File Systems. buildbot # [ 4.587828] systemd[1]: Starting Find NixOS closure... buildbot # [ 4.596440] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 4.650866] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 4.654175] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 4.665273] systemd[1]: Finished Find NixOS closure. buildbot # [ 4.668263] systemd[1]: Reached target Initrd Default Target. buildbot # [ 4.671368] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 4.700621] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 4.704098] systemd[1]: Stopped target Basic System. buildbot # [ 4.705555] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 4.708385] systemd[1]: Stopped target Path Units. buildbot # [ 4.710856] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 4.714608] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 4.716996] systemd[1]: Stopped target Slice Units. buildbot # [ 4.720169] systemd[1]: Stopped target Socket Units. buildbot # [ 4.721217] systemd[1]: Stopped target System Initialization. buildbot # [ 4.724248] systemd[1]: Stopped target Swaps. buildbot # [ 4.725393] systemd[1]: Stopped target Timer Units. buildbot # [ 4.729358] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 4.732552] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 4.736443] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 4.739113] systemd[1]: Stopped Find NixOS closure. buildbot # [ 4.744193] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 4.746287] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 4.748490] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 4.759307] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 4.761946] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 4.763089] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 4.763924] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 4.768357] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 4.770972] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 4.773995] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 4.775180] systemd[1]: Stopped target Local File Systems. buildbot # [ 4.777948] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 4.779171] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 4.784170] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 4.785148] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 4.786192] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.787204] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.787937] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 4.789664] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 4.790698] systemd[1]: systemd-udevd.service: Consumed 1.513s CPU time over 3.141s wall clock time, 23.1M memory peak. buildbot # [ 4.792242] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 4.793176] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 4.794151] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 4.795164] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 4.800163] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 4.804184] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.805366] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 4.806382] systemd[1]: Closed udev Control Socket. buildbot # [ 4.808186] systemd[1]: Starting Cleanup udev Database... buildbot # [ 4.812209] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 4.813318] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 4.814173] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 4.816177] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 4.820325] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 4.821342] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 4.844384] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 4.846359] systemd[1]: Finished Cleanup udev Database. buildbot # [ 4.848472] systemd[1]: Reached target Switch Root. buildbot # [ 4.852164] systemd[1]: Starting NixOS Activation... buildbot # [ 5.034359] initrd-nixos-activation-start[180]: booting system configuration /nix/store/axl67kbhz0qqj7d3yl30h55gmidakyb0-nixos-system-buildbot-test buildbot # [ 5.102574] initrd-nixos-activation-start[180]: running activation script... buildbot # [ 5.536390] initrd-nixos-activation-start[203]: setting up /etc... buildbot # [ 5.805829] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 5.808158] systemd[1]: Finished NixOS Activation. buildbot # [ 5.812224] systemd[1]: Starting Switch Root... buildbot # [ 5.829996] systemd[1]: Switching root. buildbot # [ 5.899270] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 6.482335] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 6.494605] systemd[1]: Detected virtualization qemu. buildbot # [ 6.497467] systemd[1]: Detected architecture arm64. buildbot # [ 6.501264] systemd[1]: Detected first boot. buildbot # [ 6.508834] systemd[1]: Initializing machine ID from random generator. buildbot # [ 6.839029] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 7.039501] NET: Registered PF_VSOCK protocol family buildbot # [ 7.046201] Guest personality initialized and is inactive buildbot # [ 7.047979] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 7.048003] Initialized host personality buildbot # [ 7.107434] systemd[1]: Applying preset policy. buildbot # [ 7.642815] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 8.173771] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 8.175353] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 8.176680] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 8.177662] systemd[1]: Created slice Slice /system/getty. buildbot # [ 8.181528] systemd[1]: Created slice User and Session Slice. buildbot # [ 8.182999] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 8.185571] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 8.187774] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 8.189788] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 8.191716] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 8.193652] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 8.195569] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 8.197477] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 8.199578] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 8.201613] systemd[1]: Reached target Path Units. buildbot # [ 8.203443] systemd[1]: Reached target Remote File Systems. buildbot # [ 8.205333] systemd[1]: Reached target Slice Units. buildbot # [ 8.207262] systemd[1]: Reached target Swaps. buildbot # [ 8.211937] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 8.216816] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 8.220687] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 8.224666] systemd[1]: Listening on Factory Reset Management. buildbot # [ 8.229733] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 8.231798] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 8.235996] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 8.237537] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 8.240046] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.242578] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.253414] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 8.255840] systemd[1]: Listening on udev Control Socket. buildbot # [ 8.257821] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 8.263307] systemd[1]: Mounting Huge Pages File System... buildbot # [ 8.268058] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 8.274227] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 8.282046] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 8.292011] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 8.308484] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 8.310610] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 8.323219] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 8.325738] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 8.329590] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 8.343040] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 8.345734] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 8.388584] systemd[1]: Starting Journal Service... buildbot # [ 8.425873] systemd[1]: Starting Load Kernel Modules... buildbot # [ 8.452527] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 8.475210] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 8.478852] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.490973] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 8.493559] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 8.496137] systemd[1]: Mounted Huge Pages File System. buildbot # [ 8.520699] fuse: init (API version 7.45) buildbot # [ 8.524165] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 8.534706] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 8.546737] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 8.550515] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 8.558434] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 8.564906] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 8.570367] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 8.574765] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 8.579226] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 8.591000] systemd-journald[274]: Collecting audit messages is enabled. buildbot # [ 8.594997] systemd[1]: Mounting FUSE Control File System... buildbot # [ 8.579470] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 8.609468] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 8.595077] systemd[1]: systemd-journald.service: Deactivated successfully.[ 8.618606] systemd[1]: Started Journal Service. buildbot # buildbot # [ 8.605441] systemd-modules-load[275]: Module 'atkbd' is built in buildbot # [ 8.611834] systemd-modules-load[275]: Module 'loop' is built in buildbot # [ 8.615917] systemd-modules-load[275]: Inserted module 'tls' buildbot # [ 8.655589] EXT4-fs (vda): re-mounted af2efc93-7f9c-4715-a339-585673223ea8. buildbot # [ 8.637280] systemd[1]: Finished Load Kernel Modules. buildbot # [ 8.644984] systemd-oomd[276]: No swap; memory pressure usage will be degraded buildbot # [ 8.652453] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 8.657755] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 8.680916] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 8.694542] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 8.696575] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 8.704171] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 8.721742] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 8.723986] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.754144] systemd[1]: Mounted FUSE Control File System. buildbot # [ 8.804094] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 8.813931] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 8.842053] systemd-journald[274]: Received client request to flush runtime journal. buildbot # [ 8.880709] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 8.884288] systemd[1]: Reached target First Boot Complete. buildbot # [ 8.887641] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 8.904095] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 8.946056] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 8.947065] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 8.949664] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 9.056411] systemd-udevd[307]: Using default interface naming scheme 'v260'. buildbot # [ 9.156147] systemd[1]: Mounting /run/wrappers... buildbot # [ 9.200173] systemd[1]: Mounted /run/wrappers. buildbot # [ 9.201441] systemd[1]: Reached target Local File Systems. buildbot # [ 9.204887] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 9.210755] systemd[1]: Starting register-nix-paths.service... buildbot # [ 9.219126] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 9.222446] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 9.237519] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 9.253983] systemd[1]: Starting Create System Files and Directories... buildbot # [ 9.258059] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 9.379492] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 9.386170] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 9.459867] systemd[1]: Finished Create System Files and Directories. buildbot # [ 9.467541] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 9.471687] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 9.562765] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 9.621477] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 9.634489] systemd[1]: Starting Update is Completed... buildbot # [ 9.700242] systemd[1]: Finished Update is Completed. buildbot # [ 10.086447] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 10.092742] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 10.404854] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 10.461511] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 10.502257] systemd[1]: Finished register-nix-paths.service. buildbot # [ 10.503686] systemd[1]: Reached target System Initialization. buildbot # [ 10.507061] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 10.510708] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 10.514061] systemd[1]: Reached target Timer Units. buildbot # [ 10.515639] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 10.519074] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 10.519858] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 10.526359] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 10.531000] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 10.537516] systemd[1]: Reached target Socket Units. buildbot # [ 10.539156] systemd[1]: Reached target Basic System. buildbot # [ 10.540964] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 10.544115] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.546828] systemd[1]: Starting Post-Boot Actions... buildbot # [ 10.562067] systemd[1]: Started Reset console on configuration changes. buildbot # [ 10.574672] systemd[1]: Starting resolvconf update... buildbot # [ 10.578243] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 10.626246] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 10.653690] systemd[1]: Finished Post-Boot Actions. buildbot # [ 10.687453] nsncd[394]: Aug 02 05:23:30.350 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.707194] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.715670] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.718095] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.724686] systemd[1]: Starting User Login Management... buildbot # [ 10.771774] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 10.847411] dbus-broker-launch[399]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 10.867833] dbus-broker-launch[399]: NSS returned no entry for 'systemd-timesync' buildbot # [ 10.870966] dbus-broker-launch[399]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 10.886615] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 10.904952] systemd-logind[415]: New seat seat0. buildbot # [ 10.912244] systemd[1]: Started User Login Management. buildbot # [ 10.920406] systemd[1]: Starting linger-users.service... buildbot # [ 10.922526] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 10.958715] dbus-broker-launch[399]: Ready buildbot # [ 10.985186] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 10.991010] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 10.998823] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 11.004263] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 11.007760] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 11.012496] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 11.013386] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 11.014256] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 11.022976] systemd[1]: Finished linger-users.service. buildbot # [ 11.028360] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 11.045957] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 11.058449] systemd[1]: Started backdoor.service. buildbot # [ 11.106448] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 11.110374] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 11.115284] nsncd[463]: Aug 02 05:23:30.772 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 11.123333] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 11.136457] systemd[1]: Finished resolvconf update. buildbot # [ 11.141636] systemd[1]: Reached target Preparation for Network. buildbot # [ 11.150106] systemd[1]: Starting DHCP Client... buildbot # [ 11.160137] systemd[1]: Starting Extra networking commands.... buildbot # connecting to host... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 11.54 seconds) buildbot: (finished: waiting for the VM to finish booting, in 12.00 seconds) buildbot # [ 11.435919] dhcpcd[499]: dhcpcd-10.3.2 starting buildbot # [ 11.459828] dhcpcd[535]: dev: loaded udev buildbot # [ 11.501722] (udev-worker)[321]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.535156] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 11.521898] systemd[1]: Finished Extra networking commands.. buildbot # [ 11.525541] systemd[1]: Reached target Network. buildbot # [ 11.533648] (udev-worker)[324]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 11.541285] systemd[1]: Starting Nginx Web Server... buildbot # [ 11.544878] (udev-worker)[324]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.551953] systemd[1]: Starting PostgreSQL Server... buildbot # [ 11.564086] systemd[1]: Starting SSH Daemon... buildbot # [ 11.594264] systemd[1]: Starting Permit User Sessions... buildbot # [ 11.681839] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 11.712609] systemd[1]: Finished Permit User Sessions. buildbot # [ 11.748468] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 11.748927] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 11.753625] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 11.754010] cfg80211: failed to load regulatory.db buildbot # [ 11.738371] systemd[1]: Started Getty on tty1. buildbot # [ 11.743159] systemd[1]: Reached target Login Prompts. buildbot # [ 11.772266] sshd[553]: Server listening on 0.0.0.0 port 22. buildbot # [ 11.773189] sshd[553]: Server listening on :: port 22. buildbot # [ 11.773939] systemd[1]: Started SSH Daemon. buildbot # [ 11.786056] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 11.914449] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 11.895156] dhcpcd[535]: eth0: waiting for carrier buildbot # [ 11.902174] dhcpcd[535]: libudev: received NULL device buildbot # [ 11.903081] dhcpcd[535]: libudev: received NULL device buildbot # [ 11.903822] dhcpcd[535]: eth0: carrier acquired buildbot # [ 11.916225] systemd-logind[415]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 11.927624] dhcpcd[535]: DUID 00:01:00:01:32:01:90:d3:52:54:00:12:34:56 buildbot # [ 11.931414] dhcpcd[535]: eth0: IAID 00:12:34:56 buildbot # [ 11.935508] dhcpcd[535]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 11.997386] setup-git-repo-start[582]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.998881] setup-git-repo-start[582]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 12.006324] setup-git-repo-start[582]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 12.014240] setup-git-repo-start[582]: hint: call: buildbot # [ 12.014959] setup-git-repo-start[582]: hint: buildbot # [ 12.015548] setup-git-repo-start[582]: hint: git config --global init.defaultBranch buildbot # [ 12.024087] setup-git-repo-start[582]: hint: buildbot # [ 12.024781] setup-git-repo-start[582]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 12.026078] setup-git-repo-start[582]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 12.027436] setup-git-repo-start[582]: hint: buildbot # [ 12.042539] setup-git-repo-start[582]: hint: git branch -m buildbot # [ 12.051171] setup-git-repo-start[582]: hint: buildbot # [ 12.051828] setup-git-repo-start[582]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 12.058837] setup-git-repo-start[582]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 12.068560] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 12.075430] dhcpcd[535]: eth0: IAID 00:12:34:56 buildbot # [ 12.082296] systemd[1]: Starting Address configuration of eth1... buildbot # [ 12.114528] postgresql-pre-start[578]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 12.115939] postgresql-pre-start[578]: This user must also own the server process. buildbot # [ 12.125082] nginx-pre-start[573]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 12.131047] nginx-pre-start[573]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 12.142293] postgresql-pre-start[578]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 12.146490] postgresql-pre-start[578]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 12.153478] postgresql-pre-start[578]: The default text search configuration will be set to "english". buildbot # [ 12.156784] postgresql-pre-start[578]: Data page checksums are disabled. buildbot # [ 12.158232] postgresql-pre-start[578]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 12.162799] postgresql-pre-start[578]: creating subdirectories ... ok buildbot # [ 12.168512] postgresql-pre-start[578]: selecting dynamic shared memory implementation ... posix buildbot # [ 12.172194] systemd[1]: Started Nginx Web Server. buildbot # [ 12.177135] setup-git-repo-start[589]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 12.186945] setup-git-repo-start[589]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 12.195730] setup-git-repo-start[589]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 12.204695] setup-git-repo-start[589]: hint: call: buildbot # [ 12.208339] setup-git-repo-start[589]: hint: buildbot # [ 12.212174] setup-git-repo-start[589]: hint: git config --global init.defaultBranch buildbot # [ 12.217911] setup-git-repo-start[589]: hint: buildbot # [ 12.219526] setup-git-repo-start[589]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 12.222300] setup-git-repo-start[589]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 12.225297] setup-git-repo-start[589]: hint: buildbot # [ 12.228429] setup-git-repo-start[589]: hint: git branch -m buildbot # [ 12.229431] setup-git-repo-start[589]: hint: buildbot # [ 12.235060] setup-git-repo-start[589]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 12.243542] setup-git-repo-start[589]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 12.274645] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 12.280900] network-addresses-eth1-start[587]: adding address 192.168.1.1/24... done buildbot # [ 12.299605] setup-git-repo-start[603]: [master (root-commit) 2a4a5e8] Initial commit with scheduled effects buildbot # [ 12.306022] setup-git-repo-start[603]: 3 files changed, 131 insertions(+) buildbot # [ 12.310911] setup-git-repo-start[603]: create mode 100644 effects-lib.nix buildbot # [ 12.320676] setup-git-repo-start[603]: create mode 100644 flake.lock buildbot # [ 12.321582] setup-git-repo-start[603]: create mode 100644 flake.nix buildbot # [ 12.322434] network-addresses-eth1-start[587]: adding address 2001:db8:1::1/64... done buildbot # [ 12.367058] systemd[1]: Finished Address configuration of eth1. buildbot # [ 12.413555] postgresql-pre-start[578]: selecting default "max_connections" ... 100 buildbot # [ 12.487741] setup-git-repo-start[617]: To /srv/repos/test-flake.git buildbot # [ 12.494253] setup-git-repo-start[617]: * [new branch] master -> master buildbot # [ 12.495251] setup-git-repo-start[617]: branch 'master' set up to track 'origin/master'. buildbot # [ 12.509181] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 12.573986] mousedev: PS/2 mouse device common for all mice buildbot: (finished: waiting for unit sshd.service, in 13.34 seconds) buildbot # [ 12.585610] postgresql-pre-start[578]: selecting default "shared_buffers" ... 128MB buildbot: waiting for unit setup-git-repo.service buildbot # [ 12.643938] systemd-logind[415]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot: (finished: waiting for unit setup-git-repo.service, in 0.09 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 12.716964] dhcpcd[535]: eth0: soliciting a DHCP lease buildbot # [ 12.724684] dhcpcd[535]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 12.732240] dhcpcd[535]: eth0: probing address 10.0.2.15/24 buildbot # [ 13.798341] dhcpcd[535]: eth0: soliciting an IPv6 router buildbot # [ 13.799667] dhcpcd[535]: eth0: Router Advertisement from fe80::2 buildbot # [ 13.801426] dhcpcd[535]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 13.803684] dhcpcd[535]: eth0: adding route to fec0::/64 buildbot # [ 13.805734] dhcpcd[535]: eth0: adding default route via fe80::2 buildbot # [ 13.971919] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 14.433674] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 14.453576] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.488451] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 14.492323] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 14.500385] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.560493] systemd-logind[415]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 14.973902] systemd-vconsole-setup[671]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 14.978684] systemd[1]: Finished Virtual Console Setup. buildbot # [ 15.242504] postgresql-pre-start[578]: selecting default time zone ... UTC buildbot # [ 15.246792] postgresql-pre-start[578]: creating configuration files ... ok buildbot # [ 15.486897] postgresql-pre-start[578]: running bootstrap script ... ok buildbot # [ 16.062152] postgresql-pre-start[578]: performing post-bootstrap initialization ... ok buildbot # [ 16.239338] postgresql-pre-start[578]: syncing data to disk ... ok buildbot # [ 16.240380] postgresql-pre-start[578]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 16.241671] postgresql-pre-start[578]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 16.243987] postgresql-pre-start[578]: Success. You can now start the database server using: buildbot # [ 16.245230] postgresql-pre-start[578]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 16.360734] postgres[705]: [705] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 16.375150] postgres[705]: [705] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 16.376492] postgres[705]: [705] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 16.378802] postgres[705]: [705] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 16.388411] postgres[711]: [711] LOG: database system was shut down at 2026-08-02 05:23:35 GMT buildbot # [ 16.397461] postgres[705]: [705] LOG: database system is ready to accept connections buildbot # [ 16.403139] systemd[1]: Started PostgreSQL Server. buildbot # [ 16.407804] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 16.596778] postgresql-setup-start[722]: CREATE DATABASE buildbot # [ 16.644818] postgresql-setup-start[727]: CREATE ROLE buildbot # [ 16.667053] postgresql-setup-start[729]: ALTER DATABASE buildbot # [ 16.673624] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 16.676379] systemd[1]: Reached target PostgreSQL. buildbot # [ 16.679151] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 16.732114] buildbot-master-pre-start[734]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 17.429011] dhcpcd[535]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 17.429240] dhcpcd[535]: eth0: adding route to 10.0.2.0/24 buildbot # [ 17.429286] dhcpcd[535]: eth0: adding default route via 10.0.2.2 buildbot # [ 17.577709] systemd[1]: Started DHCP Client. buildbot # [ 22.764950] buildbot-master-pre-start[736]: updating existing installation buildbot # [ 22.766544] buildbot-master-pre-start[736]: not touching existing buildbot.tac buildbot # [ 22.772192] buildbot-master-pre-start[736]: creating buildbot.tac.new instead buildbot # [ 22.776166] buildbot-master-pre-start[736]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 22.777356] buildbot-master-pre-start[736]: creating database (postgresql://@/buildbot) buildbot # [ 22.778438] buildbot-master-pre-start[736]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 23.166561] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 23.176639] systemd[1]: Started Buildbot Worker.. buildbot # [ 23.178558] systemd[1]: Reached target Multi-User System. buildbot # [ 23.180686] systemd[1]: Startup finished in 943ms (kernel) + 5.040s (initrd) + 17.195s (userspace) = 23.179s. buildbot: (finished: waiting for unit multi-user.target, in 11.26 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 24.903679] twistd[845]: Starting worker local-worker-000 buildbot # [ 24.903855] twistd[845]: 2026-08-02T05:23:43+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 24.907934] twistd[845]: 2026-08-02T05:23:44+0000 [-] Loaded. buildbot # [ 24.908924] twistd[845]: 2026-08-02T05:23:44+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 24.912330] twistd[845]: 2026-08-02T05:23:44+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 24.914562] twistd[845]: 2026-08-02T05:23:44+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.917197] twistd[845]: 2026-08-02T05:23:44+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.919259] twistd[845]: 2026-08-02T05:23:44+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 24.927271] twistd[845]: 2026-08-02T05:23:44+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.4110648060161184 seconds. buildbot # [ 24.931076] twistd[845]: 2026-08-02T05:23:44+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 26.979585] twistd[844]: 2026-08-02T05:23:43+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 26.981776] twistd[844]: 2026-08-02T05:23:46+0000 [-] Loaded. buildbot # [ 26.982623] twistd[844]: 2026-08-02T05:23:46+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 26.985224] twistd[844]: 2026-08-02T05:23:46+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 26.987323] twistd[844]: 2026-08-02T05:23:46+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 26.997864] twistd[844]: 2026-08-02T05:23:46+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 27.345454] twistd[845]: 2026-08-02T05:23:47+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 27.349584] twistd[845]: 2026-08-02T05:23:47+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.4406860822447625 seconds. buildbot # [ 27.353501] twistd[845]: 2026-08-02T05:23:47+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 27.910721] twistd[844]: 2026-08-02T05:23:47+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 28.023362] twistd[844]: 2026-08-02T05:23:47+0000 [-] adding 9 new builders, removing 0 buildbot # [ 28.128145] twistd[844]: 2026-08-02T05:23:47+0000 [-] adding 3 new services, removing 0 buildbot # [ 28.336715] twistd[844]: 2026-08-02T05:23:48+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 28.344109] twistd[844]: 2026-08-02T05:23:48+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 28.353152] twistd[844]: 2026-08-02T05:23:48+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 28.611138] twistd[844]: 2026-08-02T05:23:48+0000 [-] BuildbotSite starting on 8010 buildbot # [ 28.613642] twistd[844]: 2026-08-02T05:23:48+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 28.615581] twistd[844]: 2026-08-02T05:23:48+0000 [-] adding 5 new workers, removing 0 buildbot # [ 28.626692] twistd[844]: 2026-08-02T05:23:48+0000 [-] PBServerFactory starting on 9989 buildbot # [ 28.629234] twistd[844]: 2026-08-02T05:23:48+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 28.691233] twistd[844]: 2026-08-02T05:23:48+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 28.692787] twistd[844]: 2026-08-02T05:23:48+0000 [-] recording hostname in twistd.hostname buildbot # [ 28.695469] twistd[844]: 2026-08-02T05:23:48+0000 [-] message from master: attached buildbot # [ 28.697708] twistd[844]: 2026-08-02T05:23:48+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 28.704084] twistd[844]: 2026-08-02T05:23:48+0000 [-] bot attached buildbot # [ 28.705702] twistd[844]: 2026-08-02T05:23:48+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 28.706840] twistd[844]: 2026-08-02T05:23:48+0000 [-] message from master: attached buildbot # [ 28.736137] twistd[844]: 2026-08-02T05:23:48+0000 [-] BuildMaster is running buildbot # [ 28.740566] sshd-session[910]: Accepted publickey for root from ::1 port 34808 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 28.755087] sshd-session[910]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.790204] systemd[1]: Created slice Slice /user/0. buildbot # [ 28.795265] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 28.809905] systemd-logind[415]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 28.850618] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 28.864235] systemd[1]: Starting User Manager for UID 0... buildbot # [ 28.903502] (systemd)[915]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 28.910225] systemd-logind[415]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 29.255202] systemd[915]: Queued start job for default target Main User Target. buildbot # [ 29.261652] systemd[915]: Created slice User Application Slice. buildbot # [ 29.263715] systemd[915]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 29.265029] systemd[915]: Reached target Paths. buildbot # [ 29.266004] systemd[915]: Reached target Timers. buildbot # [ 29.267359] systemd[915]: Starting D-Bus User Message Bus Socket... buildbot # [ 29.270620] systemd[915]: Starting Create User Files and Directories... buildbot # [ 29.343159] systemd[915]: Finished Create User Files and Directories. buildbot # [ 29.400183] systemd[915]: Listening on D-Bus User Message Bus Socket. buildbot # [ 29.402537] systemd[915]: Reached target Sockets. buildbot # [ 29.403298] systemd[915]: Reached target Basic System. buildbot # [ 29.405774] systemd[915]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 29.407736] systemd[915]: Reached target Main User Target. buildbot # [ 29.410958] systemd[915]: Startup finished in 468ms. buildbot # [ 29.411746] systemd[1]: Started User Manager for UID 0. buildbot # [ 29.413214] systemd[1]: Started Session 1 of User root. buildbot # [ 29.449733] sshd-session[928]: Received disconnect from ::1 port 34808:11: disconnected by user buildbot # [ 29.452541] sshd-session[928]: Disconnected from user root ::1 port 34808 buildbot # [ 29.454216] sshd-session[910]: pam_unix(sshd:session): session closed for user root buildbot # [ 29.464199] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 29.465149] systemd-logind[415]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 29.472769] systemd-logind[415]: Removed session 1. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.41 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.11 seconds) (finished: subtest: Master and worker services start, in 5.71 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 29.684271] sshd-session[937]: Accepted publickey for root from ::1 port 34816 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total [ 29.706571] sshd-session[937]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 29.724379] systemd-logind[415]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # 100 266 100 266 0 0 9766 0 [ 29.728750] systemd[1]: Started Session 3 of User root. buildbot # 0100 266 100 266 0 0 8186 0 0100 266 100 266 0 0 7123 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.11 seconds) (finished: subtest: Project is registered, in 0.11 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot # [ 29.789102] sshd-session[948]: Received disconnect from ::1 port 34816:11: disconnected by user buildbot # [ 29.791311] sshd-session[948]: Disconnected from user root ::1 port 34816 buildbot # [ 29.794353] sshd-session[937]: pam_unix(sshd:session): session closed for user root buildbot # [ 29.802559] twistd[845]: 2026-08-02T05:23:49+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 29.813725] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 29.814867] systemd-logind[415]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 29.815927] systemd-logind[415]: Removed session 3. buildbot # [ 29.827252] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=47542) buildbot # [ 29.832185] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.839384] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 29.857186] twistd[844]: 2026-08-02T05:23:49+0000 [-] bot attached buildbot # [ 29.860627] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 29.866635] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 29.870405] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 29.875570] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 29.883270] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 29.902804] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 29.921933] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 29.923518] twistd[844]: 2026-08-02T05:23:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 29.951594] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.953213] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.954338] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.955442] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.975111] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.985315] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.986447] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 29.999179] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] message from master: attached buildbot # [ 30.032107] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 30.033399] twistd[845]: 2026-08-02T05:23:49+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # [ 30.034811] twistd[844]: 2026-08-02T05:23:49+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.67 seconds) (finished: subtest: CLI list-schedules works, in 0.67 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 2a4a5e8..304fad1 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.11 seconds) (finished: subtest: Push a new commit to trigger build, in 0.11 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3292 0 0100 51 100 51 0 0 2845 0 0100 51 100 51 0 0 2464 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3281 0 0100 51 100 51 0 0 2477 0 0100 51 100 51 0 0 2033 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4011 0 0100 51 100 51 0 0 3021 0 0100 51 100 51 0 0 2461 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4040 0 0100 51 100 51 0 0 3073 0 0100 51 100 51 0 0 2510 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2299 0 0100 51 100 51 0 0 1959 0 0100 51 100 51 0 0 1732 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3232 0 0100 51 100 51 0 0 2500 0 0100 51 100 51 0 0 2106 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2530 0 0100 51 100 51 0 0 2079 0 0100 51 100 51 0 0 1807 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4181 0 0100 51 100 51 0 0 3098 0 0100 51 100 51 0 0 2498 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 38.623096] sshd-session[1024]: Accepted publickey for root from ::1 port 42630 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.645244] sshd-session[1024]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.664148] systemd-logind[415]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.669833] systemd[1]: Started Session 4 of User root. buildbot # [ 38.712549] sshd-session[1028]: Received disconnect from ::1 port 42630:11: disconnected by user buildbot # [ 38.715146] sshd-session[1028]: Disconnected from user root ::1 port 42630 buildbot # [ 38.725536] sshd-session[1024]: pam_unix(sshd:session): session closed for user root buildbot # [ 38.729194] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 38.740715] systemd-logind[415]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 38.744170] systemd-logind[415]: Removed session 4. buildbot # [ 38.937803] sshd-session[1033]: Accepted publickey for root from ::1 port 42644 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 38.959331] sshd-session[1033]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 38.974802] systemd-logind[415]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 38.980569] systemd[1]: Started Session 5 of User root. buildbot # [ 39.037320] sshd-session[1036]: Received disconnect from ::1 port 42644:11: disconnected by user buildbot # [ 39.038886] sshd-session[1036]: Disconnected from user root ::1 port 42644 buildbot # [ 39.042745] sshd-session[1033]: pam_unix(sshd:session): session closed for user root buildbot # [ 39.050767] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 39.055265] systemd-logind[415]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 39.057298] systemd-logind[415]: Removed session 5. buildbot # [ 39.078554] twistd[844]: 2026-08-02T05:23:58+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 39.119945] twistd[844]: 2026-08-02T05:23:58+0000 [-] gitpoller: processing 1 changes: ['304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 39.234330] twistd[844]: 2026-08-02T05:23:58+0000 [-] added change with revision 304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2788 0 0100 51 100 51 0 0 2329 0 0100 51 100 51 0 0 2010 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3603 0 0100 51 100 51 0 0 2683 0 0100 51 100 51 0 0 2219 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4312 0 0100 51 100 51 0 0 2993 0 0100 51 100 51 0 0 2405 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4025 0 0100 51 100 51 0 0 2614 0 0100 51 100 51 0 0 2148 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2560 0 0100 51 100 51 0 0 2137 0 0100 51 100 51 0 0 1855 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 44.300853] twistd[844]: 2026-08-02T05:24:03+0000 [-] added buildset 1 to database buildbot # [ 44.468671] twistd[844]: 2026-08-02T05:24:04+0000 [-] starting build using worker buildbot # [ 44.478402] twistd[844]: 2026-08-02T05:24:04+0000 [-] .startBuild buildbot # [ 44.562482] twistd[844]: 2026-08-02T05:24:04+0000 [-] acquireLocks(worker , locks []) buildbot # [ 44.568412] twistd[844]: 2026-08-02T05:24:04+0000 [-] starting build .. pinging the worker buildbot # [ 44.571483] twistd[844]: 2026-08-02T05:24:04+0000 [-] sending ping buildbot # [ 44.577101] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] message from master: ping buildbot # [ 44.578391] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 44.599346] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [0] buildbot # [ 44.604324] twistd[844]: 2026-08-02T05:24:04+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 44.605611] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 44.606771] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 44.612129] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 44.613566] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.615675] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 44.622904] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 44.624766] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 44.636108] twistd[845]: 2026-08-02T05:24:04+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.025409 buildbot # [ 44.638008] twistd[845]: 2026-08-02T05:24:04+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 44.663288] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.703442] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [1] buildbot # [ 44.709849] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 44.711512] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 44.714954] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 44.720217] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 44.729096] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [2] buildbot # [ 44.753310] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 44.754834] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 44.760969] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.766079] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [3] buildbot # [ 44.801001] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 44.806922] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 44.814989] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.821652] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [4] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 44.854698] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 44.864396] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 44.876510] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 44.887386] twistd[844]: 2026-08-02T05:24:04+0000 [-] No git repo present, making full clone buildbot # [ 44.890139] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [5] buildbot # [ 44.898398] twistd[844]: 2026-08-02T05:24:04+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 44.912717] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 44.914451] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 44.926742] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 44.952114] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 44.959167] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 44.965065] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 44.973889] twistd[845]: 2026-08-02T05:24:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 8793 0 0100 401 100 401 0 0 7389 0 0100 401 100 401 0 0 5986 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.24 seconds) buildbot # [ 45.188484] sshd-session[1074]: Accepted publickey for root from ::1 port 45704 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 45.199692] sshd-session[1074]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 45.207781] systemd-logind[415]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 45.212648] systemd[1]: Started Session 6 of User root. buildbot # [ 45.264214] sshd-session[1078]: Received disconnect from ::1 port 45704:11: disconnected by user buildbot # [ 45.266336] sshd-session[1078]: Disconnected from user root ::1 port 45704 buildbot # [ 45.268837] sshd-session[1074]: pam_unix(sshd:session): session closed for user root buildbot # [ 45.274444] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 45.278621] systemd-logind[415]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 45.279772] systemd-logind[415]: Removed session 6. buildbot # [ 45.294284] twistd[845]: 2026-08-02T05:24:04+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.386310 buildbot # [ 45.304668] twistd[845]: 2026-08-02T05:24:04+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 45.307829] twistd[844]: 2026-08-02T05:24:04+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.329241] twistd[844]: 2026-08-02T05:24:04+0000 [-] : RemoteCommand.run [6] buildbot # [ 45.333826] twistd[844]: 2026-08-02T05:24:04+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']' in dir 'build' buildbot # [ 45.345020] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 45.349050] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): RunProcess._startCommand buildbot # [ 45.357914] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c buildbot # [ 45.363324] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.368178] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): watching logfiles {} buildbot # [ 45.373853] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c'] buildbot # [ 45.379975] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): using PTY: False buildbot # [ 45.394580] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c']): command finished with signal None, exit code 0, elapsedTime: 0.046493 buildbot # [ 45.398609] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 45.403414] twistd[844]: 2026-08-02T05:24:05+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.425506] twistd[844]: 2026-08-02T05:24:05+0000 [-] : RemoteCommand.run [7] buildbot # [ 45.429595] twistd[844]: 2026-08-02T05:24:05+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 45.445025] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 45.451434] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 45.457027] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 45.462546] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.469038] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 45.473077] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 45.479111] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 45.592558] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.143290 buildbot # [ 45.601325] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 45.603544] twistd[844]: 2026-08-02T05:24:05+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.619942] twistd[844]: 2026-08-02T05:24:05+0000 [-] : RemoteCommand.run [8] buildbot # [ 45.621712] twistd[844]: 2026-08-02T05:24:05+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 45.640997] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 45.644266] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 45.645851] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 45.647324] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.654782] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 45.656743] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 45.660436] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 45.668067] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.024111 buildbot # [ 45.670028] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 45.698172] twistd[844]: 2026-08-02T05:24:05+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.720107] twistd[844]: 2026-08-02T05:24:05+0000 [-] Got Git revision 304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c buildbot # [ 45.721689] twistd[844]: 2026-08-02T05:24:05+0000 [-] : RemoteCommand.run [9] buildbot # [ 45.747063] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 45.752153] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 45.755095] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 45.762014] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 45.766111] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 45.769470] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 45.773818] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 45.785309] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.039281 buildbot # [ 45.789564] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 45.805806] twistd[844]: 2026-08-02T05:24:05+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.829223] twistd[844]: 2026-08-02T05:24:05+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 45.854430] twistd[844]: 2026-08-02T05:24:05+0000 [-] step 'git' complete: success (None) buildbot # [ 45.863162] twistd[844]: 2026-08-02T05:24:05+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 45.884795] twistd[844]: 2026-08-02T05:24:05+0000 [-] : RemoteCommand.run [10] buildbot # [ 45.886900] twistd[844]: 2026-08-02T05:24:05+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 45.894611] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 45.896196] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 45.898440] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 45.901363] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 45.904401] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 45.906689] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 45.909775] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 45.924103] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.040495 buildbot # [ 45.927284] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 45.937676] twistd[844]: 2026-08-02T05:24:05+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 45.942976] twistd[844]: 2026-08-02T05:24:05+0000 [-] : RemoteCommand.run [11] buildbot # [ 45.947865] twistd[844]: 2026-08-02T05:24:05+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 45.981321] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 45.984942] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 45.995687] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 46.004720] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.011230] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 46.017487] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 46.027140] twistd[845]: 2026-08-02T05:24:05+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 [ 46.176999] systemd[1]: Started Nix Daemon. buildbot # 0 0 0 0 0100 401 100 401 0 0 18698 0 0100 401 100 401 0 0 14648 0 0100 401 100 401 0 0 12118 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 46.286462] nix-daemon[1123]: accepted connection from pid 1122, user buildbot-worker buildbot # [ 46.313697] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.329627 buildbot # [ 46.324446] twistd[845]: 2026-08-02T05:24:05+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 46.331906] twistd[844]: 2026-08-02T05:24:05+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.355729] twistd[844]: 2026-08-02T05:24:06+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 46.372096] twistd[844]: 2026-08-02T05:24:06+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 46.397054] twistd[844]: 2026-08-02T05:24:06+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 46.410594] twistd[844]: 2026-08-02T05:24:06+0000 [-] step 'build flake' complete: success (None) buildbot # [ 46.422384] twistd[844]: 2026-08-02T05:24:06+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xe1261b300c20>, hideStepIf=. at 0xe1261b300cc0>)): [] buildbot # [ 46.432886] twistd[844]: 2026-08-02T05:24:06+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 46.450208] twistd[844]: 2026-08-02T05:24:06+0000 [-] : RemoteCommand.run [12] buildbot # [ 46.458320] twistd[844]: 2026-08-02T05:24:06+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 46.460768] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 46.462113] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 46.464857] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 46.470599] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.473900] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 46.476421] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 46.479928] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 46.487542] twistd[845]: 2026-08-02T05:24:06+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.038320 buildbot # [ 46.490423] twistd[845]: 2026-08-02T05:24:06+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 46.502216] twistd[844]: 2026-08-02T05:24:06+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 46.527266] twistd[844]: 2026-08-02T05:24:06+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 46.535881] twistd[844]: 2026-08-02T05:24:06+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 46.549571] twistd[844]: 2026-08-02T05:24:06+0000 [-] : RemoteCommand.run [13] buildbot # [ 46.556259] twistd[844]: 2026-08-02T05:24:06+0000 [-] command '['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 46.558649] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 46.559822] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 46.568438] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c --branch master --repo test-flake buildbot # [ 46.572492] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.576052] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 46.578820] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 46.583318] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 46.887113] nix-daemon[1123]: accepted connection from pid 1132, user buildbot-worker buildbot # [ 46.924526] twistd[845]: 2026-08-02T05:24:06+0000 [-] (command ['buildbot-effects', 'list', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.369405 buildbot # [ 46.932163] twistd[845]: 2026-08-02T05:24:06+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 46.934456] twistd[844]: 2026-08-02T05:24:06+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.087015] twistd[844]: 2026-08-02T05:24:06+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xe1261b301440>, logEnviron=False)): [] buildbot # [ 47.098534] twistd[844]: 2026-08-02T05:24:06+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 47.115462] twistd[844]: 2026-08-02T05:24:06+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 47.124511] twistd[844]: 2026-08-02T05:24:06+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 47.144205] twistd[844]: 2026-08-02T05:24:06+0000 [-] : RemoteCommand.run [14] buildbot # [ 47.147025] twistd[844]: 2026-08-02T05:24:06+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 47.157005] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 47.158396] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 47.161672] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c --branch master --repo test-flake buildbot # [ 47.168203] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.171599] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 47.174531] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 47.179455] twistd[845]: 2026-08-02T05:24:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 18288 0 0100 401 100 401 0 0 13616 0 0100 401 100 401 0 0 12534 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 47.514669] nix-daemon[1123]: accepted connection from pid 1144, user buildbot-worker buildbot # [ 47.553725] twistd[845]: 2026-08-02T05:24:07+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '304fad1d9f56f5f6abbd5c359bbcbf31cb8e6c9c', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.408386 buildbot # [ 47.559551] twistd[845]: 2026-08-02T05:24:07+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 47.563659] twistd[844]: 2026-08-02T05:24:07+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.613724] twistd[844]: 2026-08-02T05:24:07+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xe1261b301620>, hideStepIf=. at 0xe1261b3016c0>, logEnviron=False)): [] buildbot # [ 47.630393] twistd[844]: 2026-08-02T05:24:07+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 47.635069] twistd[844]: 2026-08-02T05:24:07+0000 [-] : build finished buildbot # [ 47.655713] twistd[844]: 2026-08-02T05:24:07+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 22084 0 0100 411 100 411 0 0 15071 0 0100 411 100 411 0 0 10597 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.94 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.05 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) (finished: subtest: Schedule cache is created, in 0.08 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 [ 48.610661] sshd-session[1160]: Accepted publickey for root from ::1 port 45718 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # 0 0 0 0 0 0 0 0[ 48.629129] sshd-session[1160]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 48.671254] systemd-logind[415]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 48.688761] systemd[1]: Started Session 7 of User root. buildbot # [ 48.737181] sshd-session[1184]: Received disconnect from ::1 port 45718:11: disconnected by user buildbot # [ 48.750997] sshd-session[1184]: Disconnected from user root ::1 port 45718 buildbot # 100 3793 100 3793 0 0 24272 0 0100 3793 100 3793 0 0 23903[ 48.751998] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 48.758385] sshd-session[1160]: pam_unix(sshd:session): session closed for user root buildbot # [ 48.759456] systemd-logind[415]: Session 7 logged out. Waiting for processes to exit. buildbot # 0 0[ 48.761590] systemd-logind[415]: Removed session 7. buildbot # 100 3793 100 3793 0 0 22069 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.24 seconds) buildbot # [ 48.969136] sshd-session[1189]: Accepted publickey for root from ::1 port 45726 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 48.990247] sshd-session[1189]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 49.002411] systemd-logind[415]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 49.009237] systemd[1]: Started Session 8 of User root. buildbot # [ 49.056701] sshd-session[1192]: Received disconnect from ::1 port 45726:11: disconnected by user buildbot # [ 49.058996] sshd-session[1192]: Disconnected from user root ::1 port 45726 buildbot # [ 49.060403] sshd-session[1189]: pam_unix(sshd:session): session closed for user root buildbot # [ 49.065990] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 49.071477] systemd-logind[415]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 49.075977] systemd-logind[415]: Removed session 8. buildbot # [ 49.084859] twistd[844]: 2026-08-02T05:24:08+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 34023 0 0100 3793 100 3793 0 0 33262 0 0100 3793 100 3793 0 0 32575 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 36809 0 0100 3793 100 3793 0 0 35887 0 0100 3793 100 3793 0 0 35049 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 36236 0 0100 3793 100 3793 0 0 35399 0 0100 3793 100 3793 0 0 34535 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot # [ 52.608672] twistd[844]: 2026-08-02T05:24:12+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 52.615461] twistd[844]: 2026-08-02T05:24:12+0000 [-] beginning configuration update buildbot # [ 52.622733] twistd[844]: 2026-08-02T05:24:12+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 52.696129] twistd[844]: 2026-08-02T05:24:12+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 52.731493] twistd[844]: 2026-08-02T05:24:12+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 52.851074] twistd[844]: 2026-08-02T05:24:12+0000 [-] configuration update complete (took 0.236 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 36483 0 0100 4079 100 4079 0 0 35619 0 0100 4079 100 4079 0 0 34892 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.19 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 46394 0 0100 4079 100 4079 0 0 45014 0 0100 4079 100 4079 0 0 43880 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds) (finished: subtest: Nightly schedulers are created, in 5.13 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 176.8k 0 0100 2371 100 2371 0 0 148.8k 0 0100 2371 100 2371 0 0 128.9k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.06 seconds) (finished: subtest: Scheduled effect builder exists, in 0.06 seconds) (finished: run the VM test script, in 54.50 seconds) test script finished in 54.55s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.01 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh