vm-test-run-buildbot-nix-gitea
checks.aarch64-linux.gitea
· build #56
· raw
1tribuchet: building on eliza2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit gitea.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot: QEMU running (pid 45)11buildbot # Disk image does not exist, creating the virtualisation disk image...12buildbot # Formatting '/build/vm-state-buildbot/tmp.39i1iyZ36t', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: a5d7e1c8-41bc-4be5-95ee-b692c97fdb7e17buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40]27buildbot # [ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Wed Aug 19 16:18:21 UTC 202628buildbot # [ 0.000000] KASLR enabled29buildbot # [ 0.000000] random: crng init done30buildbot # [ 0.000000] Machine model: linux,dummy-virt31buildbot # [ 0.000000] efi: UEFI not found.32buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT33buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]34buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded700-0x7fdf0e7f]35buildbot # [ 0.000000] Zone ranges:36buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]37buildbot # [ 0.000000] DMA32 empty38buildbot # [ 0.000000] Normal empty39buildbot # [ 0.000000] Device empty40buildbot # [ 0.000000] Movable zone start for each node41buildbot # [ 0.000000] Early memory node ranges42buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]43buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]44buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc0000045buildbot # [ 0.000000] psci: probing for conduit method from DT.46buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware.47buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs48buildbot # [ 0.000000] psci: Trusted OS migration not required49buildbot # [ 0.000000] psci: SMC Calling Convention v1.150buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)51buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186712 r8192 d116392 u31129652buildbot # [ 0.000000] Detected PIPT I-cache on CPU053buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm)54buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface55buildbot # [ 0.000000] CPU features: detected: Spectre-v456buildbot # [ 0.000000] CPU features: detected: Spectre-BHB57buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_3858buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_2359buildbot # [ 0.000000] alternatives: applying boot alternatives60buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/j7h0i09gdnyxb8ycmmbsssyw9j3dfc66-nixos-system-buildbot-test/init regInfo=/nix/store/48dgdicadm1yr62gq46avim5iyn3mcwd-closure-info/registration console=ttyAMA0,115200n8 console=tty061buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/48dgdicadm1yr62gq46avim5iyn3mcwd-closure-info/registration", will be passed to user space.62buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes63buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)64buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)65buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB66buildbot # [ 0.000000] software IO TLB: area num 1.67buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB)68buildbot # [ 0.000000] Fallback order for Node 0: 069buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 26214470buildbot # [ 0.000000] Policy zone: DMA71buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off72buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=173buildbot # [ 0.000000] allocated 2097152 bytes of page_ext74buildbot # [ 0.000000] ftrace: allocating 74881 entries in 294 pages75buildbot # [ 0.000000] ftrace: allocated 294 pages with 4 groups76buildbot # [ 0.000000] rcu: Hierarchical RCU implementation.77buildbot # [ 0.000000] rcu: RCU event tracing is enabled.78buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.79buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled.80buildbot # [ 0.000000] Rude variant of Tasks RCU enabled.81buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled.82buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.83buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=184buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.85buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.86buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.87buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 088buildbot # [ 0.000000] GICv3: 256 SPIs implemented89buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented90buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq91buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI92buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=093buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a000094buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff]95buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44cf0000 (indirect, esz 8, psz 64K, shr 1)96buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44d00000 (flat, esz 8, psz 64K, shr 1)97buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d1000098buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d2000099buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.100buildbot # [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns101buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).102buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns103buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns104buildbot # [ 0.000029] arm-pv: using stolen time PV105buildbot # [ 0.000554] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)106buildbot # [ 0.000709] Console: colour dummy device 80x25107buildbot # [ 0.000716] printk: legacy console [tty0] enabled108buildbot # [ 0.000901] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000)109buildbot # [ 0.000907] pid_max: default: 32768 minimum: 301110buildbot # [ 0.000988] LSM: initializing lsm=capability,landlock,yama,bpf,ima111buildbot # [ 0.001119] landlock: Up and running.112buildbot # [ 0.001122] Yama: becoming mindful.113buildbot # [ 0.001573] LSM support for eBPF active114buildbot # [ 0.001693] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)115buildbot # [ 0.001712] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)116buildbot # [ 0.002773] cacheinfo: Unable to detect cache hierarchy for CPU 0117buildbot # [ 0.003441] rcu: Hierarchical SRCU implementation.118buildbot # [ 0.003446] rcu: Max phase no-delay instances is 1000.119buildbot # [ 0.004593] fsl-mc MSI: its@8080000 domain created120buildbot # [ 0.004682] EFI services will not be available.121buildbot # [ 0.004758] smp: Bringing up secondary CPUs ...122buildbot # [ 0.004766] smp: Brought up 1 node, 1 CPU123buildbot # [ 0.004769] SMP: Total of 1 processors activated.124buildbot # [ 0.004772] CPU: All CPU(s) started at EL1125buildbot # [ 0.004784] CPU features: detected: Branch Target Identification126buildbot # [ 0.004789] CPU features: detected: ARMv8.4 Translation Table Level127buildbot # [ 0.004791] CPU features: detected: Instruction cache invalidation not required for I/D coherence128buildbot # [ 0.004795] CPU features: detected: Data cache clean to the PoU not required for I/D coherence129buildbot # [ 0.004799] CPU features: detected: Common not Private translations130buildbot # [ 0.004802] CPU features: detected: CRC32 instructions131buildbot # [ 0.004805] CPU features: detected: Data cache clean to Point of Deep Persistence132buildbot # [ 0.004808] CPU features: detected: Data cache clean to Point of Persistence133buildbot # [ 0.004811] CPU features: detected: Data independent timing control (DIT)134buildbot # [ 0.004814] CPU features: detected: E0PD135buildbot # [ 0.004817] CPU features: detected: Enhanced Counter Virtualization136buildbot # [ 0.004820] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)137buildbot # [ 0.004823] CPU features: detected: Enhanced Virtualization Traps138buildbot # [ 0.004826] CPU features: detected: Fine Grained Traps139buildbot # [ 0.004830] CPU features: detected: Generic authentication (architected QARMA5 algorithm)140buildbot # [ 0.004834] CPU features: detected: RCpc load-acquire (LDAPR)141buildbot # [ 0.004838] CPU features: detected: LSE atomic instructions142buildbot # [ 0.004841] CPU features: detected: Privileged Access Never143buildbot # [ 0.004843] CPU features: detected: PMUv3144buildbot # [ 0.004846] CPU features: detected: RAS Extension Support145buildbot # [ 0.004849] CPU features: detected: RASv1p1 Extension Support146buildbot # [ 0.004852] CPU features: detected: Random Number Generator147buildbot # [ 0.004854] CPU features: detected: Speculation barrier (SB)148buildbot # [ 0.004857] CPU features: detected: Stage-2 Force Write-Back149buildbot # [ 0.004860] CPU features: detected: TLB range maintenance instructions150buildbot # [ 0.004865] CPU features: detected: Speculative Store Bypassing Safe (SSBS)151buildbot # [ 0.004900] alternatives: applying system-wide alternatives152buildbot # [ 0.007683] CPU features: detected: BBM Level 2 without TLB conflict abort153buildbot # [ 0.007832] Memory: 893460K/1048576K available (24448K kernel code, 7090K rwdata, 26344K rodata, 4736K init, 1107K bss, 113800K reserved, 32768K cma-reserved)154buildbot # [ 0.008170] devtmpfs: initialized155buildbot # [ 0.009831] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)156buildbot # [ 0.009852] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).157buildbot # [ 0.010016] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL158buildbot # [ 0.010020] 0 pages in range for non-PLT usage159buildbot # [ 0.010021] 508288 pages in range for PLT usage160buildbot # [ 0.010126] pinctrl core: initialized pinctrl subsystem161buildbot # [ 0.010892] DMI not present or invalid.162buildbot # [ 0.013760] NET: Registered PF_NETLINK/PF_ROUTE protocol family163buildbot # [ 0.015842] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations164buildbot # [ 0.015975] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations165buildbot # [ 0.016154] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations166buildbot # [ 0.016175] audit: initializing netlink subsys (disabled)167buildbot # [ 0.016680] thermal_sys: Registered thermal governor 'fair_share'168buildbot # [ 0.016682] thermal_sys: Registered thermal governor 'bang_bang'169buildbot # [ 0.016685] thermal_sys: Registered thermal governor 'step_wise'170buildbot # [ 0.016688] thermal_sys: Registered thermal governor 'user_space'171buildbot # [ 0.016692] thermal_sys: Registered thermal governor 'power_allocator'172buildbot # [ 0.016715] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1173buildbot # [ 0.016724] cpuidle: using governor ladder174buildbot # [ 0.016730] cpuidle: using governor menu175buildbot # [ 0.016917] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers.176buildbot # [ 0.016932] ASID allocator initialised with 65536 entries177buildbot # [ 0.018105] Serial: AMBA PL011 UART driver178buildbot # [ 0.023146] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1179buildbot # [ 0.023293] printk: console [ttyAMA0] enabled180buildbot # [ 0.148258] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages181buildbot # [ 0.148274] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page182buildbot # [ 0.148280] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages183buildbot # [ 0.148285] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page184buildbot # [ 0.148289] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages185buildbot # [ 0.148294] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page186buildbot # [ 0.148298] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages187buildbot # [ 0.148303] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page188buildbot # [ 0.155851] fbcon: Taking over console189buildbot # [ 0.155865] ACPI: Interpreter disabled.190buildbot # [ 0.157775] iommu: Default domain type: Translated191buildbot # [ 0.157785] iommu: DMA domain TLB invalidation policy: strict mode192buildbot # [ 0.159464] SCSI subsystem initialized193buildbot # [ 0.164704] usbcore: registered new interface driver usbfs194buildbot # [ 0.164735] usbcore: registered new interface driver hub195buildbot # [ 0.164759] usbcore: registered new device driver usb196buildbot # [ 0.165017] pps_core: LinuxPPS API ver. 1 registered197buildbot # [ 0.165024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>198buildbot # [ 0.165033] PTP clock support registered199buildbot # [ 0.165082] EDAC MC: Ver: 3.0.0200buildbot # [ 0.169795] scmi_core: SCMI protocol bus registered201buildbot # [ 0.170792] FPGA manager framework202buildbot # [ 0.171733] vgaarb: loaded203buildbot # [ 0.172361] clocksource: Switched to clocksource arch_sys_counter204buildbot # [ 0.178847] VFS: Disk quotas dquot_6.6.0205buildbot # [ 0.178891] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)206buildbot # [ 0.180568] netfs: FS-Cache loaded207buildbot # [ 0.180682] pnp: PnP ACPI: disabled208buildbot # [ 0.184657] NET: Registered PF_INET protocol family209buildbot # [ 0.184817] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)210buildbot # [ 0.212295] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)211buildbot # [ 0.212330] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)212buildbot # [ 0.212354] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)213buildbot # [ 0.215384] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)214buildbot # [ 0.215464] TCP: Hash tables configured (established 8192 bind 8192)215buildbot # [ 0.215561] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)216buildbot # [ 0.215613] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)217buildbot # [ 0.215874] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)218buildbot # [ 0.215950] NET: Registered PF_UNIX/PF_LOCAL protocol family219buildbot # [ 0.215971] NET: Registered PF_XDP protocol family220buildbot # [ 0.215990] PCI: CLS 0 bytes, default 64221buildbot # [ 0.216226] Trying to unpack rootfs image as initramfs...222buildbot # [ 0.231029] kvm [1]: HYP mode not available223buildbot # [ 0.322293] Initialise system trusted keyrings224buildbot # [ 0.323002] workingset: timestamp_bits=42 max_order=18 bucket_order=0225buildbot # [ 0.324260] squashfs: version 4.0 (2009/01/31) Phillip Lougher226buildbot # [ 0.325152] 9p: Installing v9fs 9p2000 file system support227buildbot # [ 0.353236] Key type asymmetric registered228buildbot # [ 0.353254] Asymmetric key parser 'x509' registered229buildbot # [ 0.353333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)230buildbot # [ 0.355443] io scheduler mq-deadline registered231buildbot # [ 0.355454] io scheduler kyber registered232buildbot # [ 0.364502] pl061_gpio 9030000.pl061: PL061 GPIO chip registered233buildbot # [ 0.365937] ledtrig-cpu: registered to indicate activity on CPUs234buildbot # [ 0.366302] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:235buildbot # [ 0.366319] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000236buildbot # [ 0.366332] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000237buildbot # [ 0.366340] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000238buildbot # [ 0.366361] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits239buildbot # [ 0.366384] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]240buildbot # [ 0.366459] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00241buildbot # [ 0.366469] pci_bus 0000:00: root bus resource [bus 00-ff]242buildbot # [ 0.366475] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]243buildbot # [ 0.366481] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]244buildbot # [ 0.366486] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]245buildbot # [ 0.366572] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint246buildbot # [ 0.367006] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint247buildbot # [ 0.367191] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f]248buildbot # [ 0.367208] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]249buildbot # [ 0.367238] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]250buildbot # [ 0.367254] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]251buildbot # [ 0.367709] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint252buildbot # [ 0.367890] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f]253buildbot # [ 0.367906] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]254buildbot # [ 0.367936] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]255buildbot # [ 0.368446] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint256buildbot # [ 0.368627] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f]257buildbot # [ 0.368643] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]258buildbot # [ 0.368673] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]259buildbot # [ 0.369140] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint260buildbot # [ 0.369319] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f]261buildbot # [ 0.369335] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]262buildbot # [ 0.369365] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]263buildbot # [ 0.369822] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint264buildbot # [ 0.370001] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f]265buildbot # [ 0.370017] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]266buildbot # [ 0.370047] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]267buildbot # [ 0.370496] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint268buildbot # [ 0.370677] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f]269buildbot # [ 0.370693] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]270buildbot # [ 0.370723] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]271buildbot # [ 0.371185] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint272buildbot # [ 0.371366] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f]273buildbot # [ 0.371382] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff]274buildbot # [ 0.371412] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]275buildbot # [ 0.371429] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref]276buildbot # [ 0.371909] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint277buildbot # [ 0.372097] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]278buildbot # [ 0.372128] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]279buildbot # [ 0.420665] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint280buildbot # [ 0.420866] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]281buildbot # [ 0.420897] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]282buildbot # [ 0.421296] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint283buildbot # [ 0.421476] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff]284buildbot # [ 0.421724] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint285buildbot # [ 0.421969] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f]286buildbot # [ 0.421986] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]287buildbot # [ 0.422016] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]288buildbot # [ 0.422470] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint289buildbot # [ 0.422651] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f]290buildbot # [ 0.422667] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]291buildbot # [ 0.422697] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]292buildbot # [ 0.423272] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned293buildbot # [ 0.423283] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned294buildbot # [ 0.423290] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned295buildbot # [ 0.423334] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned296buildbot # [ 0.423380] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned297buildbot # [ 0.423426] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned298buildbot # [ 0.423473] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned299buildbot # [ 0.423520] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned300buildbot # [ 0.423567] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned301buildbot # [ 0.423614] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned302buildbot # [ 0.423661] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned303buildbot # [ 0.423707] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned304buildbot # [ 0.423767] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned305buildbot # [ 0.423812] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned306buildbot # [ 0.423834] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned307buildbot # [ 0.423855] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned308buildbot # [ 0.423877] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned309buildbot # [ 0.423899] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned310buildbot # [ 0.423924] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned311buildbot # [ 0.423946] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned312buildbot # [ 0.423968] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned313buildbot # [ 0.423990] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned314buildbot # [ 0.424012] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned315buildbot # [ 0.424035] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned316buildbot # [ 0.424057] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned317buildbot # [ 0.424079] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned318buildbot # [ 0.424107] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned319buildbot # [ 0.424129] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned320buildbot # [ 0.424150] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned321buildbot # [ 0.424172] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned322buildbot # [ 0.424193] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned323buildbot # [ 0.424215] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned324buildbot # [ 0.424237] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned325buildbot # [ 0.424259] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned326buildbot # [ 0.424284] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]327buildbot # [ 0.424294] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]328buildbot # [ 0.424299] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]329buildbot # [ 0.425486] pci 0000:00:0a.0: enabling device (0000 -> 0002)330buildbot # [ 0.494580] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)331buildbot # [ 0.497414] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)332buildbot # [ 0.499289] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)333buildbot # [ 0.509517] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)334buildbot # [ 0.511398] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)335buildbot # [ 0.514909] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)336buildbot # [ 0.521283] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003)337buildbot # [ 0.528874] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)338buildbot # [ 0.530752] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)339buildbot # [ 0.540466] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)340buildbot # [ 0.542545] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)341buildbot # [ 0.555105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled342buildbot # [ 0.557666] msm_serial: driver initialized343buildbot # [ 0.557800] SuperH (H)SCI(F) driver initialized344buildbot # [ 0.557853] STM32 USART driver initialized345buildbot # [ 0.591106] loop: module loaded346buildbot # [ 0.591268] virtio_blk virtio5: 1/0/0 default/read/poll queues347buildbot # [ 0.591947] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)348buildbot # [ 0.596915] megasas: 07.734.00.00-rc1349buildbot # [ 0.597600] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]350buildbot # [ 0.609338] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000351buildbot # [ 0.609367] Intel/Sharp Extended Query Table at 0x0031352buildbot # [ 0.610915] Using buffer write method353buildbot # [ 0.610969] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]354buildbot # [ 0.617435] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000355buildbot # [ 0.617459] Intel/Sharp Extended Query Table at 0x0031356buildbot # [ 0.618719] Using buffer write method357buildbot # [ 0.618744] Concatenating MTD devices:358buildbot # [ 0.618748] (0): "0.flash"359buildbot # [ 0.618752] (1): "0.flash"360buildbot # [ 0.618755] into device "0.flash"361buildbot # [ 0.844719] Freeing initrd memory: 26940K362buildbot # [ 0.850549] tun: Universal TUN/TAP device driver, 1.6363buildbot # [ 0.854081] thunder_xcv, ver 1.0364buildbot # [ 0.854120] thunder_bgx, ver 1.0365buildbot # [ 0.854142] nicpf, ver 1.0366buildbot # [ 0.854672] e1000: Intel(R) PRO/1000 Network Driver367buildbot # [ 0.854681] e1000: Copyright (c) 1999-2006 Intel Corporation.368buildbot # [ 0.854708] e1000e: Intel(R) PRO/1000 Network Driver369buildbot # [ 0.854716] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.370buildbot # [ 0.854745] igb: Intel(R) Gigabit Ethernet Network Driver371buildbot # [ 0.854751] igb: Copyright (c) 2007-2014 Intel Corporation.372buildbot # [ 0.854773] igbvf: Intel(R) Gigabit Virtual Function Network Driver373buildbot # [ 0.854779] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.374buildbot # [ 0.854912] sky2: driver version 1.30375buildbot # [ 0.857030] ehci-pci 0000:00:0a.0: EHCI Host Controller376buildbot # [ 0.857054] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1377buildbot # [ 0.857279] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000378buildbot # [ 0.866739] usbcore: registered new interface driver usb-storage379buildbot # [ 0.866797] usbcore: registered new interface driver usbserial_generic380buildbot # [ 0.866812] usbserial: USB Serial support registered for generic381buildbot # [ 0.867394] hv_vmbus: registering driver hyperv_keyboard382buildbot # [ 0.871157] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00383buildbot # [ 0.871476] hub 1-0:1.0: USB hub found384buildbot # [ 0.871496] hub 1-0:1.0: 6 ports detected385buildbot # [ 0.873799] rtc-pl031 9010000.pl031: registered as rtc0386buildbot # [ 0.873826] rtc-pl031 9010000.pl031: setting system clock to 2026-08-23T03:04:44 UTC (1787454284)387buildbot # [ 0.874156] i2c_dev: i2c /dev entries driver388buildbot # [ 0.879027] sdhci: Secure Digital Host Controller Interface driver389buildbot # [ 0.879039] sdhci: Copyright(c) Pierre Ossman390buildbot # [ 0.879301] Synopsys Designware Multimedia Card Interface Driver391buildbot # [ 0.879660] sdhci-pltfm: SDHCI platform and OF driver helper392buildbot # [ 0.884074] hid: raw HID events driver (C) Jiri Kosina393buildbot # [ 0.884311] usbcore: registered new interface driver usbhid394buildbot # [ 0.884318] usbhid: USB HID core driver395buildbot # [ 0.887134] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available396buildbot # [ 0.889728] drop_monitor: Initializing network drop monitor service397buildbot # [ 0.889889] NET: Registered PF_INET6 protocol family398buildbot # [ 0.891822] Segment Routing with IPv6399buildbot # [ 0.891841] In-situ OAM (IOAM) with IPv6400buildbot # [ 0.891869] NET: Registered PF_PACKET protocol family401buildbot # [ 0.893692] 9pnet: Installing 9P2000 support402buildbot # [ 0.895671] Key type dns_resolver registered403buildbot # [ 0.902301] registered taskstats version 1404buildbot # [ 0.902457] Loading compiled-in X.509 certificates405buildbot # [ 0.910623] Demotion targets for Node 0: null406buildbot # [ 0.910716] Key type .fscrypt registered407buildbot # [ 0.910723] Key type fscrypt-provisioning registered408buildbot # [ 0.910809] ima: No TPM chip found, activating TPM-bypass!409buildbot # [ 0.910828] ima: Allocated hash algorithm: sha1410buildbot # [ 0.910849] ima: No architecture policies found411buildbot # [ 0.914855] input: gpio-keys as /devices/platform/gpio-keys/input/input0412buildbot # [ 0.931800] clk: Disabling unused clocks413buildbot # [ 0.931822] PM: genpd: Disabling unused power domains414buildbot # [ 0.935890] Freeing unused kernel memory: 4736K415buildbot # [ 0.936151] Run /init as init process416buildbot # [ 0.950511] systemd[1]: Successfully made /usr/ read-only.417buildbot # [ 1.116438] usb 1-1: new high-speed USB device number 2 using ehci-pci418buildbot # [ 1.268790] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1419buildbot # [ 1.285232] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)420buildbot # [ 1.297640] systemd[1]: Detected virtualization qemu.421buildbot # [ 1.299643] systemd[1]: Detected architecture arm64.422buildbot # [ 1.301662] systemd[1]: Running in initrd.423buildbot # [ 1.304175] systemd[1]: Initializing machine ID from random generator.424buildbot # [ 1.307174] systemd[1]: Hostname set to <buildbot>.425buildbot # [ 1.356627] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0426buildbot # [ 1.480426] usb 1-2: new high-speed USB device number 3 using ehci-pci427buildbot # [ 1.606914] systemd[1]: bpf-restrict-fs: LSM BPF program attached428buildbot # [ 1.636925] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2429buildbot # [ 1.644659] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0430buildbot # [ 1.723061] systemd[1]: Queued start job for default target Initrd Default Target.431buildbot # [ 1.736142] systemd[1]: Created slice Slice /system/modprobe.432buildbot # [ 1.737573] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.433buildbot # [ 1.738942] systemd[1]: Expecting device /dev/disk/by-label/nixos...434buildbot # [ 1.740039] systemd[1]: Reached target Path Units.435buildbot # [ 1.740960] systemd[1]: Reached target Slice Units.436buildbot # [ 1.741822] systemd[1]: Reached target Swaps.437buildbot # [ 1.742678] systemd[1]: Reached target Timer Units.438buildbot # [ 1.743718] systemd[1]: Listening on D-Bus System Message Bus Socket.439buildbot # [ 1.745041] systemd[1]: Listening on Journal Socket (/dev/log).440buildbot # [ 1.746199] systemd[1]: Listening on Journal Sockets.441buildbot # [ 1.747224] systemd[1]: Listening on udev Control Socket.442buildbot # [ 1.748297] systemd[1]: Listening on udev Kernel Socket.443buildbot # [ 1.749306] systemd[1]: Reached target Socket Units.444buildbot # [ 1.751755] systemd[1]: Starting Create List of Static Device Nodes...445buildbot # [ 1.760526] systemd[1]: Starting Load Kernel Module 9pnet_virtio...446buildbot # [ 1.760620] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs447buildbot # [ 1.768641] systemd[1]: Mounting Kernel Configuration File System...448buildbot # [ 1.791810] systemd[1]: Starting Journal Service...449buildbot # [ 1.808530] systemd[1]: Starting Load Kernel Modules...450buildbot # [ 1.809497] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os451buildbot # [ 1.824537] systemd[1]: Starting Coldplug All udev Devices...452buildbot # [ 1.853828] systemd-journald[73]: Collecting audit messages is disabled.453buildbot # [ 1.860472] systemd[1]: Finished Create List of Static Device Nodes.454buildbot # [ 1.861417] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.455buildbot # [ 1.861699] systemd[1]: Finished Load Kernel Module 9pnet_virtio.456buildbot # [ 1.872788] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...457buildbot # [ 1.897449] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.458buildbot # [ 1.899395] systemd[1]: Mounted Kernel Configuration File System.459buildbot # [ 1.912918] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev460buildbot # [ 1.917262] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0461buildbot # [ 1.917479] [drm] features: -virgl +edid -resource_blob -host_visible462buildbot # [ 1.917488] [drm] features: -context_init463buildbot # [ 1.918202] [drm] number of scanouts: 1464buildbot # [ 1.918220] [drm] number of cap sets: 0465buildbot # [ 1.922681] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.466buildbot # [ 1.925024] systemd[1]: Starting Create Static Device Nodes in /dev...467buildbot # [ 1.936745] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic468buildbot # [ 1.936760] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0469buildbot # [ 1.960226] systemd[1]: Finished Create Static Device Nodes in /dev.470buildbot # [ 1.960389] systemd[1]: Reached target Preparation for Local File Systems.471buildbot # [ 1.960413] systemd[1]: Reached target Local File Systems.472buildbot # [ 1.964137] systemd[1]: Starting Rule-based Manager for Device Events and Files...473buildbot # [ 1.976600] Console: switching to colour frame buffer device 160x50474buildbot # [ 1.982597] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device475buildbot # [ 2.008618] systemd[1]: Finished Load Kernel Modules.476buildbot # [ 2.011402] systemd[1]: Starting Apply Kernel Variables...477buildbot # [ 2.045756] systemd[1]: Started Journal Service.478buildbot # [ 2.040300] systemd-modules-load[74]: Inserted module 'dm_mod'479buildbot # [ 2.044362] systemd-modules-load[74]: Module 'virtio_balloon' is built in480buildbot # [ 2.045474] systemd-modules-load[74]: Module 'virtio_console' is built in481buildbot # [ 2.046505] systemd-modules-load[74]: Inserted module 'virtio_gpu'482buildbot # [ 2.047433] systemd-modules-load[74]: Module 'virtio_rng' is built in483buildbot # [ 2.063033] systemd[1]: Starting Create System Files and Directories...484buildbot # [ 2.064898] systemd[1]: Finished Apply Kernel Variables.485buildbot # [ 2.066059] systemd-udevd[79]: Using default interface naming scheme 'v261'.486buildbot # [ 2.076170] systemd[1]: Finished Create System Files and Directories.487buildbot # [ 2.094886] systemd[1]: Started Rule-based Manager for Device Events and Files.488buildbot # [ 2.151870] systemd[1]: Starting Virtual Console Setup...489buildbot # [ 2.196446] systemd-vconsole-setup[103]: Configuration of first virtual console was skipped, ignoring remaining ones.490buildbot # [ 2.199710] systemd[1]: Finished Virtual Console Setup.491buildbot # [ 2.794259] systemd[1]: Finished Coldplug All udev Devices.492buildbot # [ 2.800075] systemd[1]: Reached target System Initialization.493buildbot # [ 2.801692] systemd[1]: Reached target Basic System.494buildbot # [ 2.935828] (udev-worker)[98]: Network interface NamePolicy= disabled on kernel command line.495buildbot # [ 2.970429] (udev-worker)[99]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.496buildbot # [ 2.975485] (udev-worker)[99]: Network interface NamePolicy= disabled on kernel command line.497buildbot # [ 3.033647] systemd[1]: Found device /dev/disk/by-label/nixos.498buildbot # [ 3.036085] systemd[1]: Reached target Initrd Root Device.499buildbot # [ 3.039148] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...500buildbot # [ 3.089323] systemd-fsck[111]: nixos: clean, 12/65536 files, 13019/262144 blocks501buildbot # [ 3.096170] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.502buildbot # [ 3.098059] systemd[1]: Mounting /sysroot...503buildbot # [ 3.148038] EXT4-fs (vda): mounted filesystem a5d7e1c8-41bc-4be5-95ee-b692c97fdb7e r/w with ordered data mode. Quota mode: none.504buildbot # [ 3.133784] systemd[1]: Mounted /sysroot.505buildbot # [ 3.136396] systemd[1]: Reached target Initrd Root File System.506buildbot # [ 3.139678] systemd[1]: Starting Mountpoints Configured in the Real Root...507buildbot # [ 3.167574] systemd-sysroot-fstab-check[119]: /sysroot should be mounted in the initrd, will request daemon-reload.508buildbot # [ 3.172653] systemd[1]: Reload requested from client PID 119 ('systemd-sysroot') (unit initrd-parse-etc.service)...509buildbot # [ 3.176955] systemd[1]: Reloading...510buildbot # [ 3.381625] systemd[1]: Reloading finished in 205 ms.511buildbot # [ 3.406829] systemd-sysroot-fstab-check[119]: Requesting initrd-fs.target/start/replace...512buildbot # [ 3.408835] systemd-sysroot-fstab-check[119]: Requesting swap.target/start/replace...513buildbot # [ 3.414876] systemd[1]: Starting Load Kernel Module 9pnet_virtio...514buildbot # [ 3.420366] systemd[1]: initrd-parse-etc.service: Deactivated successfully.515buildbot # [ 3.434594] systemd[1]: Finished Mountpoints Configured in the Real Root.516buildbot # [ 3.435629] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.517buildbot # [ 3.440263] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.518buildbot # [ 3.444628] systemd[1]: Finished Load Kernel Module 9pnet_virtio.519buildbot # [ 3.810004] systemd[1]: Mounting /sysroot/nix/.ro-store...520buildbot # [ 3.821821] systemd[1]: Mounting /sysroot/nix/.rw-store...521buildbot # [ 3.836825] systemd[1]: Mounting /sysroot/run...522buildbot # [ 3.868199] systemd[1]: Mounting /sysroot/tmp/shared...523buildbot # [ 3.889313] systemd[1]: Mounting /sysroot/tmp/xchg...524buildbot # [ 3.894672] systemd[1]: Mounted /sysroot/nix/.rw-store.525buildbot # [ 3.915394] systemd[1]: Starting rw-sysroot-nix-store.service...526buildbot # [ 3.918577] systemd[1]: Mounted /sysroot/nix/.ro-store.527buildbot # [ 3.920132] systemd[1]: Mounted /sysroot/run.528buildbot # [ 3.947626] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.529buildbot # [ 3.952682] systemd[1]: Finished rw-sysroot-nix-store.service.530buildbot # [ 3.959026] systemd[1]: Mounted /sysroot/tmp/shared.531buildbot # [ 3.970712] systemd[1]: Mounting /sysroot/nix/store...532buildbot # [ 3.973151] systemd[1]: Mounted /sysroot/tmp/xchg.533buildbot # [ 4.012585] systemd[1]: Mounted /sysroot/nix/store.534buildbot # [ 4.014061] systemd[1]: Reached target Initrd File Systems.535buildbot # [ 4.017533] systemd[1]: Starting Find NixOS closure...536buildbot # [ 4.035850] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...537buildbot # [ 4.060170] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.538buildbot # [ 4.070988] systemd[1]: Finished Find NixOS closure.539buildbot # [ 4.074143] systemd[1]: Reached target Initrd Default Target.540buildbot # [ 4.076469] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...541buildbot # [ 4.102685] systemd[1]: Stopped target Initrd Default Target.542buildbot # [ 4.106464] systemd[1]: Stopped target Basic System.543buildbot # [ 4.108225] systemd[1]: Stopped target Initrd Root Device.544buildbot # [ 4.112185] systemd[1]: Stopped target Path Units.545buildbot # [ 4.113966] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.546buildbot # [ 4.116102] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.547buildbot # [ 4.119826] systemd[1]: Stopped target Slice Units.548buildbot # [ 4.121826] systemd[1]: Stopped target Socket Units.549buildbot # [ 4.125416] systemd[1]: Stopped target System Initialization.550buildbot # [ 4.126856] systemd[1]: Stopped target Swaps.551buildbot # [ 4.131087] systemd[1]: Stopped target Timer Units.552buildbot # [ 4.133655] systemd[1]: dbus.socket: Deactivated successfully.553buildbot # [ 4.135526] systemd[1]: Closed D-Bus System Message Bus Socket.554buildbot # [ 4.139531] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.555buildbot # [ 4.148206] systemd[1]: Stopped Find NixOS closure.556buildbot # [ 4.148960] systemd[1]: Starting Load Kernel Module 9pnet_virtio...557buildbot # [ 4.149954] systemd[1]: Starting rw-sysroot-nix-store.service...558buildbot # [ 4.150874] systemd[1]: systemd-sysctl.service: Deactivated successfully.559buildbot # [ 4.151809] systemd[1]: Stopped Apply Kernel Variables.560buildbot # [ 4.168376] systemd[1]: systemd-modules-load.service: Deactivated successfully.561buildbot # [ 4.169444] systemd[1]: Stopped Load Kernel Modules.562buildbot # [ 4.170136] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.563buildbot # [ 4.171194] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.564buildbot # [ 4.178712] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.565buildbot # [ 4.183148] systemd[1]: Stopped Create System Files and Directories.566buildbot # [ 4.184887] systemd[1]: Stopped target Local File Systems.567buildbot # [ 4.186603] systemd[1]: Stopped target Preparation for Local File Systems.568buildbot # [ 4.189247] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.569buildbot # [ 4.191094] systemd[1]: Stopped Coldplug All udev Devices.570buildbot # [ 4.195206] systemd[1]: Stopping Rule-based Manager for Device Events and Files...571buildbot # [ 4.196629] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.572buildbot # [ 4.197768] systemd[1]: Stopped Virtual Console Setup.573buildbot # [ 4.198522] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.574buildbot # [ 4.199508] systemd[1]: Finished rw-sysroot-nix-store.service.575buildbot # [ 4.201659] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.576buildbot # [ 4.202666] systemd[1]: Finished Load Kernel Module 9pnet_virtio.577buildbot # [ 4.203510] systemd[1]: initrd-cleanup.service: Deactivated successfully.578buildbot # [ 4.208146] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.579buildbot # [ 4.212255] systemd[1]: systemd-udevd.service: Deactivated successfully.580buildbot # [ 4.213346] systemd[1]: Stopped Rule-based Manager for Device Events and Files.581buildbot # [ 4.214457] systemd[1]: systemd-udevd.service: Consumed 1.106s CPU time over 2.242s wall clock time, 17.9M memory peak.582buildbot # [ 4.220150] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.583buildbot # [ 4.221172] systemd[1]: Closed udev Control Socket.584buildbot # [ 4.221873] systemd[1]: Starting Cleanup udev Database...585buildbot # [ 4.222644] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.586buildbot # [ 4.228391] systemd[1]: Stopped Create Static Device Nodes in /dev.587buildbot # [ 4.229303] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.588buildbot # [ 4.230419] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.589buildbot # [ 4.231399] systemd[1]: kmod-static-nodes.service: Deactivated successfully.590buildbot # [ 4.236430] systemd[1]: Stopped Create List of Static Device Nodes.591buildbot # [ 4.249183] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.592buildbot # [ 4.252500] systemd[1]: Finished Cleanup udev Database.593buildbot # [ 4.253302] systemd[1]: Reached target Switch Root.594buildbot # [ 4.255715] systemd[1]: Starting NixOS Activation...595buildbot # [ 4.410715] initrd-nixos-activation-start[171]: booting system configuration /nix/store/j7h0i09gdnyxb8ycmmbsssyw9j3dfc66-nixos-system-buildbot-test596buildbot # [ 4.472133] initrd-nixos-activation-start[171]: running activation script...597buildbot # [ 4.875453] initrd-nixos-activation-start[194]: setting up /etc...598buildbot # [ 5.129325] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.599buildbot # [ 5.131990] systemd[1]: Finished NixOS Activation.600buildbot # [ 5.136191] systemd[1]: Starting Switch Root...601buildbot # [ 5.155129] systemd[1]: Switching root.602buildbot # [ 5.355537] systemd-journald[73]: Received SIGTERM from PID 1 (systemd).603buildbot # [ 5.955182] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)604buildbot # [ 5.967609] systemd[1]: Detected virtualization qemu.605buildbot # [ 5.971385] systemd[1]: Detected architecture arm64.606buildbot # [ 5.973535] systemd[1]: Detected first boot.607buildbot # [ 5.980034] systemd[1]: Initializing machine ID from random generator.608buildbot # [ 6.299116] systemd[1]: bpf-restrict-fs: LSM BPF program attached609buildbot # [ 6.482912] systemd[1]: Applying preset policy.610buildbot # [ 6.970292] systemd[1]: Populated /etc with preset unit settings.611buildbot # [ 7.483995] systemd[1]: initrd-switch-root.service: Deactivated successfully.612buildbot # [ 7.485710] systemd[1]: Stopped initrd-switch-root.service.613buildbot # [ 7.487639] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.614buildbot # [ 7.492862] systemd[1]: Created slice Slice /system/getty.615buildbot # [ 7.495587] systemd[1]: Created slice User and Session Slice.616buildbot # [ 7.497725] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.617buildbot # [ 7.498884] systemd[1]: Started Forward Password Requests to Wall Directory Watch.618buildbot # [ 7.501785] systemd[1]: Expecting device /dev/hvc0...619buildbot # [ 7.502487] systemd[1]: Expecting device /dev/ttyAMA0...620buildbot # [ 7.504113] systemd[1]: Reached target Local Encrypted Volumes.621buildbot # [ 7.506534] systemd[1]: Stopped target initrd-fs.target.622buildbot # [ 7.508500] systemd[1]: Stopped target initrd-root-fs.target.623buildbot # [ 7.509579] systemd[1]: Stopped target initrd-switch-root.target.624buildbot # [ 7.512027] systemd[1]: Reached target Virtual Machines and Containers.625buildbot # [ 7.513338] systemd[1]: Reached target Path Units.626buildbot # [ 7.515584] systemd[1]: Reached target Remote File Systems.627buildbot # [ 7.516686] systemd[1]: Reached target Slice Units.628buildbot # [ 7.518950] systemd[1]: Reached target Swaps.629buildbot # [ 7.522809] systemd[1]: Listening on Query the User Interactively for a Password.630buildbot # [ 7.527665] systemd[1]: Listening on Process Core Dump Socket.631buildbot # [ 7.531767] systemd[1]: Listening on Credential Encryption/Decryption.632buildbot # [ 7.535850] systemd[1]: Listening on Factory Reset Management.633buildbot # [ 7.537207] systemd[1]: Listening on Hostname Service Socket.634buildbot # [ 7.543147] systemd[1]: Starting Journal Log Access Socket...635buildbot # [ 7.545397] systemd[1]: Listening on Journal Audit Socket.636buildbot # [ 7.549644] systemd[1]: Listening on Console Output Muting Service Socket.637buildbot # [ 7.551257] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.638buildbot # [ 7.552849] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os639buildbot # [ 7.555853] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki640buildbot # [ 7.566991] systemd[1]: Listening on Disk Repartitioning Service Socket.641buildbot # [ 7.567423] systemd[1]: Listening on udev Control Socket.642buildbot # [ 7.567768] systemd[1]: Listening on udev Varlink Socket.643buildbot # [ 7.573005] systemd[1]: Mounting Huge Pages File System...644buildbot # [ 7.576999] systemd[1]: Mounting POSIX Message Queue File System...645buildbot # [ 7.585776] systemd[1]: Mounting Kernel Debug File System...646buildbot # [ 7.599321] systemd[1]: Mounting Kernel Trace File System...647buildbot # [ 7.607293] systemd[1]: Starting Create List of Static Device Nodes...648buildbot # [ 7.621102] systemd[1]: Starting Load Kernel Module 9pnet_virtio...649buildbot # [ 7.623350] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs650buildbot # [ 7.644740] systemd[1]: Mounting Kernel Configuration File System...651buildbot # [ 7.649032] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm652buildbot # [ 7.651694] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore653buildbot # [ 7.689003] systemd[1]: Starting Load Kernel Module fuse...654buildbot # [ 7.695919] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67655buildbot # [ 7.723214] systemd[1]: Starting Journal Service...656buildbot # [ 7.750213] systemd[1]: Starting Load Kernel Modules...657buildbot # [ 7.771270] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...658buildbot # [ 7.790029] systemd[1]: Starting Remount Root and Kernel File Systems...659buildbot # [ 7.795951] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os660buildbot # [ 7.807937] fuse: init (API version 7.45)661buildbot # [ 7.828206] systemd[1]: Starting Coldplug All udev Devices...662buildbot # [ 7.856953] systemd-journald[266]: Collecting audit messages is enabled.663buildbot # [ 7.863656] systemd[1]: Listening on Journal Log Access Socket.664buildbot # [ 7.851724] systemd[1]: Queued start job for default target Multi-User System.665buildbot # [ 7.873531] systemd[1]: Started Journal Service.666buildbot # [ 7.868225] systemd[1]: systemd-journald.service: Deactivated successfully.667buildbot # [ 7.876728] systemd-modules-load[267]: Module 'atkbd' is built in668buildbot # [ 7.880971] systemd-modules-load[267]: Module 'loop' is built in669buildbot # [ 7.887871] systemd[1]: Mounted Huge Pages File System.670buildbot # [ 7.894011] systemd[1]: Mounted POSIX Message Queue File System.671buildbot # [ 7.904144] systemd[1]: Mounted Kernel Debug File System.672buildbot # [ 7.906280] systemd[1]: Mounted Kernel Trace File System.673buildbot # [ 7.928952] EXT4-fs (vda): re-mounted a5d7e1c8-41bc-4be5-95ee-b692c97fdb7e.674buildbot # [ 7.911421] systemd[1]: Finished Create List of Static Device Nodes.675buildbot # [ 7.915524] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.676buildbot # [ 7.922322] systemd[1]: Finished Load Kernel Module 9pnet_virtio.677buildbot # [ 7.930355] systemd[1]: Mounted Kernel Configuration File System.678buildbot # [ 7.931458] systemd[1]: modprobe@fuse.service: Deactivated successfully.679buildbot # [ 7.932973] systemd[1]: Finished Load Kernel Module fuse.680buildbot # [ 7.937144] systemd-modules-load[267]: Inserted module 'tls'681buildbot # [ 7.940501] systemd[1]: Mounting FUSE Control File System...682buildbot # [ 7.947578] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...683buildbot # [ 7.951779] systemd[1]: Finished Load Kernel Modules.684buildbot # [ 7.958756] systemd[1]: Finished Remount Root and Kernel File Systems.685buildbot # [ 7.964456] systemd-oomd[269]: No swap; memory pressure usage will be degraded686buildbot # [ 7.967798] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.687buildbot # [ 7.975524] systemd[1]: Listening on Disk Image Download Service Socket.688buildbot # [ 7.985547] systemd[1]: Starting Flush Journal to Persistent Storage...689buildbot # [ 7.989500] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore690buildbot # [ 8.001440] systemd[1]: Starting Load/Save OS Random Seed...691buildbot # [ 8.006748] systemd[1]: Starting Apply Kernel Variables...692buildbot # [ 8.017114] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os693buildbot # [ 8.073463] systemd[1]: Mounted FUSE Control File System.694buildbot # [ 8.076871] systemd[1]: Finished Load/Save OS Random Seed.695buildbot # [ 8.078696] systemd[1]: Reached target First Boot Complete.696buildbot # [ 8.098992] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.697buildbot # [ 8.110751] systemd[1]: Starting Create Static Device Nodes in /dev...698buildbot # [ 8.147032] systemd-journald[266]: Received client request to flush runtime journal.699buildbot # [ 8.180245] systemd[1]: Finished Apply Kernel Variables.700buildbot # [ 8.184300] systemd[1]: Finished Flush Journal to Persistent Storage.701buildbot # [ 8.222048] systemd[1]: Finished Create Static Device Nodes in /dev.702buildbot # [ 8.223013] systemd[1]: Reached target Preparation for Local File Systems.703buildbot # [ 8.225316] systemd[1]: Starting Rule-based Manager for Device Events and Files...704buildbot # [ 8.390295] systemd-udevd[300]: Using default interface naming scheme 'v261'.705buildbot # [ 8.469533] systemd[1]: Mounting /run/wrappers...706buildbot # [ 8.517239] systemd[1]: Mounted /run/wrappers.707buildbot # [ 8.520269] systemd[1]: Reached target Local File Systems.708buildbot # [ 8.528196] systemd[1]: Listening on Boot Loader Control Service Socket.709buildbot # [ 8.531635] systemd[1]: Starting register-nix-paths.service...710buildbot # [ 8.540089] systemd[1]: Starting Create SUID/SGID Wrappers...711buildbot # [ 8.546858] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.712buildbot # [ 8.571363] systemd[1]: Starting Save Transient machine-id to Disk...713buildbot # [ 8.585343] systemd[1]: Starting Create System Files and Directories...714buildbot # [ 8.589220] systemd[1]: Started Rule-based Manager for Device Events and Files.715buildbot # [ 8.699234] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.716buildbot # [ 8.706509] systemd[1]: Finished Save Transient machine-id to Disk.717buildbot # [ 8.828219] systemd[1]: Finished Create System Files and Directories.718buildbot # [ 8.841272] systemd[1]: Starting Rebuild Journal Catalog...719buildbot # [ 8.864326] systemd[1]: Starting Record System Boot/Shutdown in UTMP...720buildbot # [ 8.965134] systemd[1]: Finished Record System Boot/Shutdown in UTMP.721buildbot # [ 9.010546] systemd[1]: Finished Rebuild Journal Catalog.722buildbot # [ 9.024187] systemd[1]: Starting Update is Completed...723buildbot # [ 9.113401] systemd[1]: Finished Update is Completed.724buildbot # [ 9.539786] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.725buildbot # [ 9.549787] systemd[1]: Finished Create SUID/SGID Wrappers.726buildbot # [ 9.740916] systemd[1]: Finished Coldplug All udev Devices.727buildbot # [ 9.808302] systemd[1]: Finished register-nix-paths.service.728buildbot # [ 9.809290] systemd[1]: Reached target System Initialization.729buildbot # [ 9.812237] systemd[1]: Started Discard unused filesystem blocks once a week.730buildbot # [ 9.815683] systemd[1]: Started Daily Cleanup of Temporary Directories.731buildbot # [ 9.818629] systemd[1]: Reached target Timer Units.732buildbot # [ 9.821876] systemd[1]: Listening on D-Bus System Message Bus Socket.733buildbot # [ 9.824178] systemd[1]: Listening on Nix Daemon Socket.734buildbot # [ 9.828825] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.735buildbot # [ 9.852987] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3736buildbot # [ 9.834995] systemd[1]: Reached target Socket Units.737buildbot # [ 9.840166] systemd[1]: Reached target Basic System.738buildbot # [ 9.841862] systemd[1]: Starting Import lastlog data into lastlog2 database...739buildbot # [ 9.846056] systemd[1]: Starting Name Service Cache Daemon (nsncd)...740buildbot # [ 9.848340] systemd[1]: Starting Post-Boot Actions...741buildbot # [ 9.864513] systemd[1]: Started Reset console on configuration changes.742buildbot # [ 9.883637] systemd[1]: Starting resolvconf update...743buildbot # [ 9.924651] systemd[1]: Starting D-Bus System Message Bus...744buildbot # [ 9.949750] systemd[1]: Finished Post-Boot Actions.745buildbot # [ 9.977578] nsncd[389]: Aug 23 03:04:53.623 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"746buildbot # [ 9.986882] systemd[1]: Started Name Service Cache Daemon (nsncd).747buildbot # [ 9.993416] systemd[1]: Reached target Host and Network Name Lookups.748buildbot # [ 9.998173] systemd[1]: Reached target User and Group Name Lookups.749buildbot # [ 10.006704] systemd[1]: Starting User Login Management...750buildbot # [ 10.039215] systemd[1]: Finished Import lastlog data into lastlog2 database.751buildbot # [ 10.152845] dbus-broker-launch[395]: Looking up NSS user entry for 'systemd-timesync'...752buildbot # [ 10.168549] systemd-logind[410]: New seat seat0.753buildbot # [ 10.173437] dbus-broker-launch[395]: NSS returned no entry for 'systemd-timesync'754buildbot # [ 10.181963] dbus-broker-launch[395]: Invalid user-name in /nix/store/a7pdkdk7p0w0wxzxn2wmw9hdhs2c85ri-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"755buildbot # [ 10.189319] systemd[1]: Started User Login Management.756buildbot # [ 10.196300] systemd[1]: Starting linger-users.service...757buildbot # [ 10.215443] systemd[1]: Started D-Bus System Message Bus.758buildbot # [ 10.263975] dbus-broker-launch[395]: Ready759buildbot # [ 10.268552] systemd[1]: linger-users.service: Deactivated successfully.760buildbot # [ 10.273114] systemd[1]: Finished linger-users.service.761buildbot # [ 10.280978] systemd[1]: Stopped target Host and Network Name Lookups.762buildbot # [ 10.285809] systemd[1]: Stopping Host and Network Name Lookups...763buildbot # [ 10.289249] systemd[1]: Stopped target User and Group Name Lookups.764buildbot # [ 10.295165] systemd[1]: Stopping User and Group Name Lookups...765buildbot # [ 10.297042] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...766buildbot # [ 10.302063] systemd[1]: nscd.service: Deactivated successfully.767buildbot # [ 10.307977] systemd[1]: Stopped Name Service Cache Daemon (nsncd).768buildbot # [ 10.313776] systemd[1]: Starting Name Service Cache Daemon (nsncd)...769buildbot # [ 10.380224] nsncd[463]: Aug 23 03:04:54.024 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"770buildbot # [ 10.385673] systemd[1]: Started Name Service Cache Daemon (nsncd).771buildbot # [ 10.388257] systemd[1]: Reached target Host and Network Name Lookups.772buildbot # [ 10.392122] systemd[1]: Reached target User and Group Name Lookups.773buildbot # [ 10.412243] systemd[1]: Finished resolvconf update.774buildbot # [ 10.413164] systemd[1]: Reached target Preparation for Network.775buildbot # [ 10.420232] systemd[1]: Starting DHCP Client...776buildbot # [ 10.432809] systemd[1]: Starting Extra networking commands....777buildbot # [ 10.636529] dhcpcd[491]: dhcpcd-10.3.2 starting778buildbot # [ 10.652209] dhcpcd[522]: dev: loaded udev779buildbot # [ 10.658040] dhcpcd[522]: no valid interfaces found780buildbot # [ 10.661443] dhcpcd[522]: no valid interfaces found781buildbot # [ 10.718019] systemd[1]: Starting Virtual Console Setup...782buildbot # [ 10.729395] systemd[1]: Finished Extra networking commands..783buildbot # [ 10.743614] systemd[1]: Reached target Network.784buildbot # [ 10.754032] systemd[1]: Starting gitea...785buildbot # [ 10.774632] systemd[1]: Starting Nginx Web Server...786buildbot # [ 10.787907] systemd[1]: Starting PostgreSQL Server...787buildbot # [ 10.795984] systemd[1]: Starting Permit User Sessions...788buildbot # [ 10.828723] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.789buildbot # [ 10.834468] systemd[1]: Stopped Virtual Console Setup.790buildbot # [ 10.871495] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs791buildbot # [ 10.877878] systemd[1]: Starting Virtual Console Setup...792buildbot # [ 10.880222] systemd[1]: Finished Permit User Sessions.793buildbot # [ 10.902103] systemd[1]: Started Getty on tty1.794buildbot # [ 10.906588] systemd[1]: Reached target Login Prompts.795buildbot # [ 11.223598] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.796buildbot # [ 11.264339] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.797buildbot # [ 11.284857] systemd[1]: Started backdoor.service.798buildbot # [ 11.355929] postgresql-pre-start[567]: The files belonging to this database system will be owned by user "postgres".799buildbot # [ 11.364889] postgresql-pre-start[567]: This user must also own the server process.800buildbot # [ 11.374347] nginx-pre-start[565]: nginx: the configuration file /nix/store/akd7q9azhy8izhpyybfy5d9ggfwmv8kl-nginx.conf syntax is ok801buildbot # [ 11.387867] nginx-pre-start[565]: nginx: configuration file /nix/store/akd7q9azhy8izhpyybfy5d9ggfwmv8kl-nginx.conf test is successful802buildbot # [ 11.398192] systemd[1]: Started Nginx Web Server.803buildbot # [ 11.405729] postgresql-pre-start[567]: The database cluster will be initialized with locale "en_US.UTF-8".804buildbot # [ 11.414832] postgresql-pre-start[567]: The default database encoding has accordingly been set to "UTF8".805buildbot # [ 11.421106] postgresql-pre-start[567]: The default text search configuration will be set to "english".806buildbot # [ 11.430017] postgresql-pre-start[567]: Data page checksums are enabled.807buildbot # [ 11.434400] postgresql-pre-start[567]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok808buildbot # [ 11.438506] postgresql-pre-start[567]: creating subdirectories ... ok809buildbot # [ 11.443416] postgresql-pre-start[567]: selecting dynamic shared memory implementation ... posix810buildbot # connecting to host...811buildbot # [ 11.491660] (udev-worker)[318]: Network interface NamePolicy= disabled on kernel command line.812buildbot # [ 11.502453] (udev-worker)[309]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.813buildbot # [ 11.518399] (udev-worker)[309]: Network interface NamePolicy= disabled on kernel command line.814buildbot: Guest shell says: b'Spawning backdoor root shell...\n'815buildbot # [ 11.547795] 8021q: 802.1Q VLAN Support v1.8816buildbot: connected to guest root shell817buildbot: (connecting took 11.89 seconds)818buildbot: (finished: waiting for the VM to finish booting, in 12.34 seconds)819buildbot # [ 11.730840] systemd-vconsole-setup[550]: Configuration of first virtual console was skipped, ignoring remaining ones.820buildbot # [ 11.749408] systemd[1]: Finished Virtual Console Setup.821buildbot # [ 11.757334] postgresql-pre-start[567]: selecting default "max_connections" ... 100822buildbot # [ 11.782995] cfg80211: Loading compiled-in X.509 certificates for regulatory database823buildbot # [ 11.771728] systemd[1]: Condition check resulted in Virtio network device being skipped.824buildbot # [ 11.781499] systemd[1]: Starting Address configuration of eth1...825buildbot # [ 11.839155] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'826buildbot # [ 11.839633] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'827buildbot # [ 11.844442] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2828buildbot # [ 11.844758] cfg80211: failed to load regulatory.db829buildbot # [ 11.969494] 8021q: adding VLAN 0 to HW filter on device eth1830buildbot # [ 11.982835] 8021q: adding VLAN 0 to HW filter on device eth0831buildbot # [ 11.964385] dhcpcd[522]: eth0: waiting for carrier832buildbot # [ 11.973333] dhcpcd[522]: eth0: carrier acquired833buildbot # [ 11.999138] network-addresses-eth1-start[598]: adding address 192.168.1.1/24... done834buildbot # [ 12.002851] dhcpcd[522]: DUID 00:01:00:01:32:1d:1f:d7:52:54:00:12:34:56835buildbot # [ 12.006710] dhcpcd[522]: eth0: IAID 00:12:34:56836buildbot # [ 12.010767] dhcpcd[522]: eth0: adding address fe80::5054:ff:fe12:3456837buildbot # [ 12.015323] postgresql-pre-start[567]: selecting default "shared_buffers" ... 128MB838buildbot # [ 12.020104] network-addresses-eth1-start[598]: adding address 2001:db8:1::1/64... done839buildbot # [ 12.042774] systemd[1]: Finished Address configuration of eth1.840buildbot # [ 12.501342] systemd-logind[410]: Watching system buttons on /dev/input/event0 (gpio-keys)841buildbot # [ 12.643117] mousedev: PS/2 mouse device common for all mice842buildbot # [ 12.871156] systemd-logind[410]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)843buildbot # [ 13.918115] dhcpcd[522]: eth0: soliciting a DHCP lease844buildbot # [ 13.924766] dhcpcd[522]: eth0: offered 10.0.2.15 from 10.0.2.2845buildbot # [ 13.932451] dhcpcd[522]: eth0: probing address 10.0.2.15/24846buildbot # [ 14.552417] dhcpcd[522]: eth0: soliciting an IPv6 router847buildbot # [ 14.554198] dhcpcd[522]: eth0: Router Advertisement from fe80::2848buildbot # [ 14.556759] dhcpcd[522]: eth0: adding address fec0::5054:ff:fe12:3456/64849buildbot # [ 14.559031] dhcpcd[522]: eth0: adding route to fec0::/64850buildbot # [ 14.561808] dhcpcd[522]: eth0: adding default route via fe80::2851buildbot # [ 15.046998] gitea-pre-start[665]: 2026/08/23 03:04:58 cmd/migrate.go:31:runMigrate() [I] AppPath: /nix/store/lrb1iif4l251sx4c06dchc5b3fddazln-gitea-1.27.2/bin/gitea852buildbot # [ 15.049482] gitea-pre-start[665]: 2026/08/23 03:04:58 cmd/migrate.go:32:runMigrate() [I] AppWorkPath: /var/lib/gitea853buildbot # [ 15.053338] gitea-pre-start[665]: 2026/08/23 03:04:58 cmd/migrate.go:33:runMigrate() [I] Custom path: /var/lib/gitea/custom854buildbot # [ 15.057805] gitea-pre-start[665]: 2026/08/23 03:04:58 cmd/migrate.go:34:runMigrate() [I] Log path: /var/lib/gitea/log855buildbot # [ 15.061929] gitea-pre-start[665]: 2026/08/23 03:04:58 cmd/migrate.go:35:runMigrate() [I] Configuration file: /var/lib/gitea/custom/conf/app.ini856buildbot # [ 15.066453] gitea-pre-start[665]: 2026/08/23 03:04:58 .../v3@v3.10.0/command_run.go:95:(*Command).Run() [I] PING DATABASE sqlite3857buildbot # [ 15.477234] postgresql-pre-start[567]: selecting default time zone ... UTC858buildbot # [ 15.482536] postgresql-pre-start[567]: creating configuration files ... ok859buildbot # [ 15.664655] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.860buildbot # [ 15.671769] systemd[1]: Stopped Virtual Console Setup.861buildbot # [ 15.675305] systemd[1]: Stopping Virtual Console Setup...862buildbot # [ 15.678503] systemd[1]: Starting Virtual Console Setup...863buildbot # [ 15.708972] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.864buildbot # [ 15.740356] systemd-logind[410]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)865buildbot # [ 15.749449] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.866buildbot # [ 15.753497] systemd[1]: Stopped Virtual Console Setup.867buildbot # [ 15.768612] systemd[1]: Starting Virtual Console Setup...868buildbot # [ 16.060243] postgresql-pre-start[567]: running bootstrap script ... ok869buildbot # [ 16.240871] systemd-vconsole-setup[685]: Configuration of first virtual console was skipped, ignoring remaining ones.870buildbot # [ 16.252660] systemd[1]: Finished Virtual Console Setup.871buildbot # [ 16.904724] postgresql-pre-start[567]: performing post-bootstrap initialization ... ok872buildbot # [ 17.239852] postgresql-pre-start[567]: syncing data to disk ... ok873buildbot # [ 17.241075] postgresql-pre-start[567]: initdb: warning: enabling "trust" authentication for local connections874buildbot # [ 17.242531] postgresql-pre-start[567]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.875buildbot # [ 17.245732] postgresql-pre-start[567]: Success. You can now start the database server using:876buildbot # [ 17.246997] postgresql-pre-start[567]: pg_ctl -D /var/lib/postgresql/18 -l logfile start877buildbot # [ 17.394957] postgres[707]: [707] LOG: starting PostgreSQL 18.6 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit878buildbot # [ 17.408385] postgres[707]: [707] LOG: listening on IPv6 address "::1", port 5432879buildbot # [ 17.409583] postgres[707]: [707] LOG: listening on IPv4 address "127.0.0.1", port 5432880buildbot # [ 17.412653] postgres[707]: [707] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"881buildbot # [ 17.428225] postgres[716]: [716] LOG: database system was shut down at 2026-08-23 03:05:00 GMT882buildbot # [ 17.434525] postgres[707]: [707] LOG: database system is ready to accept connections883buildbot # [ 17.439861] systemd[1]: Started PostgreSQL Server.884buildbot # [ 17.450806] systemd[1]: Starting PostgreSQL Setup Scripts...885buildbot # [ 17.739972] postgresql-setup-start[727]: CREATE DATABASE886buildbot # [ 17.803747] postgresql-setup-start[732]: CREATE ROLE887buildbot # [ 17.830435] postgresql-setup-start[734]: ALTER DATABASE888buildbot # [ 17.838553] systemd[1]: Finished PostgreSQL Setup Scripts.889buildbot # [ 17.840742] systemd[1]: Reached target PostgreSQL.890buildbot # [ 18.493769] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:263:runWeb() [I] Starting Gitea on PID: 749891buildbot # [ 19.339721] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:115:showWebStartupMessage() [I] Gitea version: 1.27.2 built with go1.26.5 : sqlite, sqlite_unlock_notify892buildbot # [ 19.339877] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:116:showWebStartupMessage() [I] * RunMode: prod893buildbot # [ 19.339912] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:117:showWebStartupMessage() [I] * AppPath: /nix/store/lrb1iif4l251sx4c06dchc5b3fddazln-gitea-1.27.2/bin/gitea894buildbot # [ 19.339945] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:118:showWebStartupMessage() [I] * WorkPath: /var/lib/gitea895buildbot # [ 19.339976] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:119:showWebStartupMessage() [I] * CustomPath: /var/lib/gitea/custom896buildbot # [ 19.340068] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:120:showWebStartupMessage() [I] * ConfigFile: /var/lib/gitea/custom/conf/app.ini897buildbot # [ 19.340104] gitea[749]: 2026/08/23 03:05:02 cmd/web.go:121:showWebStartupMessage() [I] Prepare to run web server898buildbot # [ 19.401747] dhcpcd[522]: eth0: leased 10.0.2.15 for 86400 seconds899buildbot # [ 19.403393] dhcpcd[522]: eth0: adding route to 10.0.2.0/24900buildbot # [ 19.404720] dhcpcd[522]: eth0: adding default route via 10.0.2.2901buildbot # [ 19.561314] systemd[1]: Started DHCP Client.902buildbot # [ 19.580562] gitea[749]: 2026/08/23 03:05:03 routers/init.go:117:InitWebInstalled() [I] Git version: 2.55.0 (home: /var/lib/gitea/data/home)903buildbot # [ 19.904445] gitea[749]: 2026/08/23 03:05:03 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.0904buildbot # [ 19.907708] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:227:initAttachments() [I] Initialising Attachment storage with type: local905buildbot # [ 19.909725] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/attachments906buildbot # [ 19.911809] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:217:initAvatars() [I] Initialising Avatar storage with type: local907buildbot # [ 19.913743] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/avatars908buildbot # [ 19.915694] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:243:initRepoAvatars() [I] Initialising Repository Avatar storage with type: local909buildbot # [ 19.919032] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-avatars910buildbot # [ 19.921090] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:249:initRepoArchives() [I] Initialising Repository Archive storage with type: local911buildbot # [ 19.922948] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-archive912buildbot # [ 19.925146] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:259:initPackages() [I] Initialising Packages storage with type: local913buildbot # [ 19.926927] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/packages914buildbot # [ 19.928924] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:270:initActions() [I] Initialising Actions storage with type: local915buildbot # [ 19.930627] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_log916buildbot # [ 19.936250] gitea[749]: 2026/08/23 03:05:03 modules/storage/storage.go:274:initActions() [I] Initialising ActionsArtifacts storage with type: local917buildbot # [ 19.938006] gitea[749]: 2026/08/23 03:05:03 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_artifacts918buildbot # [ 19.939829] gitea[749]: 2026/08/23 03:05:03 routers/common/db.go:22:InitDBEngine() [I] Beginning ORM engine initialization.919buildbot # [ 19.948150] gitea[749]: 2026/08/23 03:05:03 routers/common/db.go:29:InitDBEngine() [I] ORM engine initialization attempt #1/10...920buildbot # [ 19.949618] gitea[749]: 2026/08/23 03:05:03 cmd/web.go:205:serveInstalled() [I] PING DATABASE sqlite3921buildbot # [ 20.002107] gitea[749]: 2026/08/23 03:05:03 cmd/web.go:205:serveInstalled() [W] Table system_setting Column version db default is , struct default is 1922buildbot # [ 20.047127] gitea[749]: 2026/08/23 03:05:03 routers/init.go:138:InitWebInstalled() [I] ORM engine initialization successful!923buildbot # [ 21.464922] gitea[749]: 2026/08/23 03:05:05 .../indexer/issues/indexer.go:78:InitIssueIndexer.1() [I] PID 749: Initializing Issue Indexer: bleve924buildbot # [ 21.469720] gitea[749]: 2026/08/23 03:05:05 .../indexer/issues/indexer.go:155:InitIssueIndexer.2() [I] Issue Indexer Initialization took 9.50254ms925buildbot # [ 21.495550] gitea[749]: 2026/08/23 03:05:05 routers/init.go:86:syncAppConfForGit() [I] AppPath changed from '' to '/nix/store/lrb1iif4l251sx4c06dchc5b3fddazln-gitea-1.27.2/bin/gitea'926buildbot # [ 21.498787] gitea[749]: 2026/08/23 03:05:05 routers/init.go:91:syncAppConfForGit() [I] CustomConf changed from '' to '/var/lib/gitea/custom/conf/app.ini'927buildbot # [ 21.500586] gitea[749]: 2026/08/23 03:05:05 routers/init.go:97:syncAppConfForGit() [I] re-sync repository hooks ...928buildbot # [ 21.502220] gitea[749]: 2026/08/23 03:05:05 routers/init.go:100:syncAppConfForGit() [I] re-write ssh public keys ...929buildbot # [ 21.503995] gitea[749]: 2026/08/23 03:05:05 .../indexer/stats/indexer.go:41:populateRepoIndexer() [I] Populating the repo stats indexer with existing repositories930buildbot # [ 22.291962] gitea[749]: 2026/08/23 03:05:05 cmd/web.go:329:listen() [I] Listen: http://0.0.0.0:3742931buildbot # [ 22.295840] gitea[749]: 2026/08/23 03:05:05 cmd/web.go:333:listen() [I] AppURL(ROOT_URL): http://localhost:3742/932buildbot # [ 22.295894] gitea[749]: 2026/08/23 03:05:05 modules/graceful/server.go:52:NewServer() [I] Starting new Web server: tcp:0.0.0.0:3742 on PID: 749933buildbot # [ 22.298453] systemd[1]: Started gitea.934buildbot # [ 22.305575] systemd[1]: Starting Setup Gitea test environment...935buildbot # [ 22.345807] setup-gitea-start[859]: + timeout 60 /nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin/bash -c 'until curl -s http://localhost:3742/api/v1/version; do sleep 1; done'936buildbot # [ 22.412498] gitea[749]: 2026/08/23 03:05:06 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:45190, 200 OK in 6.9ms @ misc/version.go:15(misc.Version)937buildbot # [ 22.414770] setup-gitea-start[862]: {"version":"1.27.2"}938buildbot # [ 22.421358] setup-gitea-start[859]: + echo 'Gitea is ready'939buildbot # [ 22.422634] setup-gitea-start[859]: Gitea is ready940buildbot # [ 22.423823] setup-gitea-start[859]: + echo 'Creating admin user...'941buildbot # [ 22.425497] setup-gitea-start[859]: Creating admin user...942buildbot # [ 22.426597] setup-gitea-start[859]: + cd /var/lib/gitea943buildbot # [ 22.428446] setup-gitea-start[859]: + runuser -u gitea -- env GITEA_WORK_DIR=/var/lib/gitea GITEA_CUSTOM=/var/lib/gitea/custom /nix/store/lrb1iif4l251sx4c06dchc5b3fddazln-gitea-1.27.2/bin/gitea admin user create --config /var/lib/gitea/custom/conf/app.ini --username gitea-admin --password testpassword123 --email admin@example.com --admin --must-change-password=false944buildbot # [ 22.459017] runuser[866]: pam_unix(runuser:session): session opened for user gitea(uid=996) by (uid=0)945buildbot: (finished: waiting for unit gitea.service, in 23.29 seconds)946buildbot: waiting for unit setup-gitea.service947buildbot # [ 22.659953] setup-gitea-start[868]: 2026/08/23 03:05:06 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.0948buildbot # [ 22.681041] setup-gitea-start[868]: New user 'gitea-admin' has been successfully created!949buildbot # [ 22.688660] runuser[866]: pam_unix(runuser:session): session closed for user gitea950buildbot # [ 22.691738] setup-gitea-start[859]: + USER_CREATE_RESULT=0951buildbot # [ 22.693137] setup-gitea-start[859]: + '[' 0 -ne 0 ']'952buildbot # [ 22.693841] setup-gitea-start[859]: + echo 'Verifying user exists via API...'953buildbot # [ 22.694761] setup-gitea-start[859]: Verifying user exists via API...954buildbot # [ 22.695595] setup-gitea-start[859]: + for i in {1..10}955buildbot # [ 22.697210] setup-gitea-start[879]: ++ curl -s -u gitea-admin:testpassword123 http://localhost:3742/api/v1/user956buildbot # [ 22.755169] gitea[749]: 2026/08/23 03:05:06 HTTPRequest [I] router: completed GET /api/v1/user for [::1]:45202, 200 OK in 32.2ms @ user/user.go:127(user.GetAuthenticatedUser)957buildbot # [ 22.760051] setup-gitea-start[859]: + USER_CHECK='{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'958buildbot # [ 22.778255] setup-gitea-start[881]: + echo '{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'959buildbot # [ 22.786110] setup-gitea-start[882]: + grep -q '"username":"gitea-admin"'960buildbot # [ 22.787385] setup-gitea-start[859]: + echo 'User verified to exist!'961buildbot # [ 22.789033] setup-gitea-start[859]: User verified to exist!962buildbot # [ 22.789881] setup-gitea-start[859]: + break963buildbot # [ 22.790865] setup-gitea-start[859]: + echo 'Creating access token...'964buildbot # [ 22.791842] setup-gitea-start[859]: Creating access token...965buildbot # [ 22.793467] setup-gitea-start[883]: ++ curl -v -X POST -H 'Content-Type: application/json' -d '{"name":"buildbot-token","scopes":["write:repository","write:user","write:admin","write:organization"]}' -u gitea-admin:testpassword123 http://localhost:3742/api/v1/users/gitea-admin/tokens966buildbot # [ 22.852191] gitea[749]: 2026/08/23 03:05:06 HTTPRequest [I] router: completed POST /api/v1/users/gitea-admin/tokens for [::1]:45214, 201 Created in 31.3ms @ user/app.go:75(user.CreateAccessToken)967buildbot # [ 22.858027] setup-gitea-start[859]: + TOKEN_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45214 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:06 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 7864 3056 0\r100 368 100 265 100 103 7858 3054 0\r100 368 100 265 100 103 7853 3052 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"b54936d9fd70f2b678c18924f0e999604be367a2","token_last_eight":"4be367a2","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'968buildbot # [ 22.880586] setup-gitea-start[859]: + echo $'Token response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45214 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:06 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 7864 3056 0\r100 368 100 265 100 103 7858 3054 0\r100 368 100 265 100 103 7853 3052 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"b54936d9fd70f2b678c18924f0e999604be367a2","token_last_eight":"4be367a2","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'969buildbot # [ 22.902640] setup-gitea-start[859]: Token response: Note: Unnecessary use of -X or --request, POST is already inferred.970buildbot # [ 22.905214] setup-gitea-start[859]: * Host localhost:3742 was resolved.971buildbot # [ 22.907071] setup-gitea-start[859]: * IPv6: ::1972buildbot # [ 22.908916] setup-gitea-start[859]: * IPv4: 127.0.0.1973buildbot # [ 22.910003] setup-gitea-start[859]: * Trying [::1]:3742...974buildbot # [ 22.911191] setup-gitea-start[859]: * Established connection to localhost (::1 port 3742) from ::1 port 45214975buildbot # [ 22.913122] setup-gitea-start[859]: % Total % Received % Xferd Average Speed Time Time Time Current976buildbot # [ 22.914848] setup-gitea-start[859]: Dload Upload Total Spent Left Speed977buildbot # [ 22.919511] setup-gitea-start[859]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x978buildbot # [ 22.921339] setup-gitea-start[859]: * Server auth using Basic with user 'gitea-admin'979buildbot # [ 22.922590] setup-gitea-start[859]: > POST /api/v1/users/gitea-admin/tokens HTTP/1.1980buildbot # [ 22.925260] setup-gitea-start[859]: > Host: localhost:3742981buildbot # [ 22.926309] setup-gitea-start[859]: > Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz982buildbot # [ 22.927447] setup-gitea-start[859]: > User-Agent: curl/8.21.0983buildbot # [ 22.929138] setup-gitea-start[859]: > Accept: */*984buildbot # [ 22.929980] setup-gitea-start[859]: > Content-Type: application/json985buildbot # [ 22.930964] setup-gitea-start[859]: > Content-Length: 103986buildbot # [ 22.931850] setup-gitea-start[859]: >987buildbot # [ 22.932724] setup-gitea-start[859]: } [103 bytes data]988buildbot # [ 22.933568] setup-gitea-start[859]: * upload completely sent off: 103 bytes989buildbot # [ 22.934705] setup-gitea-start[859]: < HTTP/1.1 201 Created990buildbot # [ 22.936126] setup-gitea-start[859]: < Cache-Control: max-age=0, private, must-revalidate991buildbot # [ 22.937201] setup-gitea-start[859]: < Content-Type: application/json;charset=utf-8992buildbot # [ 22.938175] setup-gitea-start[859]: < X-Content-Type-Options: nosniff993buildbot # [ 22.939015] setup-gitea-start[859]: < X-Frame-Options: SAMEORIGIN994buildbot # [ 22.939831] setup-gitea-start[859]: < Date: Sun, 23 Aug 2026 03:05:06 GMT995buildbot # [ 22.940944] setup-gitea-start[859]: < Content-Length: 265996buildbot # [ 22.942060] setup-gitea-start[859]: <997buildbot # [ 22.942681] setup-gitea-start[859]: { [265 bytes data]998buildbot # [ 22.944125] setup-gitea-start[859]: 100 368 100 265 100 103 7864 3056 0100 368 100 265 100 103 7858 3054 0100 368 100 265 100 103 7853 3052 0999buildbot # [ 22.947266] setup-gitea-start[859]: * Connection #0 to host localhost:3742 left intact1000buildbot # [ 22.948804] setup-gitea-start[859]: {"id":1,"name":"buildbot-token","sha1":"b54936d9fd70f2b678c18924f0e999604be367a2","token_last_eight":"4be367a2","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}1001buildbot # [ 22.952740] setup-gitea-start[886]: ++ echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45214 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:06 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 7864 3056 0\r100 368 100 265 100 103 7858 3054 0\r100 368 100 265 100 103 7853 3052 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"b54936d9fd70f2b678c18924f0e999604be367a2","token_last_eight":"4be367a2","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1002buildbot # [ 22.973521] setup-gitea-start[887]: ++ grep -o '"sha1":"[^"]*'1003buildbot # [ 22.975621] setup-gitea-start[888]: ++ cut '-d"' -f41004buildbot # [ 22.977991] setup-gitea-start[859]: + TOKEN=b54936d9fd70f2b678c18924f0e999604be367a21005buildbot # [ 22.979123] setup-gitea-start[859]: + '[' -z b54936d9fd70f2b678c18924f0e999604be367a2 ']'1006buildbot # [ 22.980450] setup-gitea-start[859]: + echo 'Token created successfully: b54936d9fd...'1007buildbot # [ 22.981571] setup-gitea-start[859]: Token created successfully: b54936d9fd...1008buildbot # [ 22.982630] setup-gitea-start[859]: + mkdir -p /var/lib/buildbot1009buildbot # [ 22.983910] setup-gitea-start[859]: + echo b54936d9fd70f2b678c18924f0e999604be367a21010buildbot # [ 22.985236] setup-gitea-start[859]: + chmod 644 /var/lib/buildbot/gitea-token1011buildbot # [ 22.993404] setup-gitea-start[859]: + echo b54936d9fd70f2b678c18924f0e999604be367a21012buildbot # [ 22.994522] setup-gitea-start[859]: + echo 'Creating repository test-flake...'1013buildbot # [ 22.995467] setup-gitea-start[859]: Creating repository test-flake...1014buildbot # [ 22.997895] setup-gitea-start[891]: ++ curl -v -X POST -H 'Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2' -H 'Content-Type: application/json' -H 'accept: application/json' -d '{"name":"test-flake","private":false}' http://localhost:3742/api/v1/user/repos1015buildbot # [ 23.141998] gitea[749]: 2026/08/23 03:05:06 HTTPRequest [I] router: completed POST /api/v1/user/repos for [::1]:45226, 201 Created in 115.8ms @ repo/repo.go:280(repo.Create)1016buildbot # [ 23.149911] setup-gitea-start[859]: + REPO_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45226 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:06 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 19508 306 0\r100 2391 0 2354 100 37 19504 306 0\r100 2391 0 2354 100 37 19501 306 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:05:06Z","updated_at":"2026-08-23T03:05:06Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1017buildbot # [ 23.195031] setup-gitea-start[859]: + echo $'Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45226 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:06 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 19508 306 0\r100 2391 0 2354 100 37 19504 306 0\r100 2391 0 2354 100 37 19501 306 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:05:06Z","updated_at":"2026-08-23T03:05:06Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1018buildbot # [ 23.241900] setup-gitea-start[859]: Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.1019buildbot # [ 23.243837] setup-gitea-start[859]: * Host localhost:3742 was resolved.1020buildbot # [ 23.245259] setup-gitea-start[859]: * IPv6: ::11021buildbot # [ 23.246469] setup-gitea-start[859]: * IPv4: 127.0.0.11022buildbot # [ 23.247304] setup-gitea-start[859]: * Trying [::1]:3742...1023buildbot # [ 23.248577] setup-gitea-start[859]: * Established connection to localhost (::1 port 3742) from ::1 port 452261024buildbot # [ 23.250195] setup-gitea-start[859]: % Total % Received % Xferd Average Speed Time Time Time Current1025buildbot # [ 23.251753] setup-gitea-start[859]: Dload Upload Total Spent Left Speed1026buildbot # [ 23.253479] setup-gitea-start[859]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1027buildbot # [ 23.255292] setup-gitea-start[859]: > POST /api/v1/user/repos HTTP/1.11028buildbot # [ 23.256399] setup-gitea-start[859]: > Host: localhost:37421029buildbot # [ 23.258347] setup-gitea-start[859]: > User-Agent: curl/8.21.01030buildbot # [ 23.259338] setup-gitea-start[859]: > Authorization: token b54936d9fd70f2b678c18924f0e999604be367a21031buildbot # [ 23.261069] setup-gitea-start[859]: > Content-Type: application/json1032buildbot # [ 23.262195] setup-gitea-start[859]: > accept: application/json1033buildbot # [ 23.263641] setup-gitea-start[859]: > Content-Length: 371034buildbot # [ 23.264683] setup-gitea-start[859]: >1035buildbot # [ 23.265274] setup-gitea-start[859]: } [37 bytes data]1036buildbot # [ 23.266037] setup-gitea-start[859]: * upload completely sent off: 37 bytes1037buildbot # [ 23.267019] setup-gitea-start[859]: < HTTP/1.1 201 Created1038buildbot # [ 23.267759] setup-gitea-start[859]: < Cache-Control: max-age=0, private, must-revalidate1039buildbot # [ 23.270438] setup-gitea-start[859]: < Content-Type: application/json;charset=utf-81040buildbot # [ 23.271798] setup-gitea-start[859]: < X-Content-Type-Options: nosniff1041buildbot # [ 23.272946] setup-gitea-start[859]: < X-Frame-Options: SAMEORIGIN1042buildbot # [ 23.274356] setup-gitea-start[859]: < Date: Sun, 23 Aug 2026 03:05:06 GMT1043buildbot # [ 23.275444] setup-gitea-start[859]: < Transfer-Encoding: chunked1044buildbot # [ 23.276973] setup-gitea-start[859]: <1045buildbot # [ 23.277613] setup-gitea-start[859]: { [2366 bytes data]1046buildbot # [ 23.278677] setup-gitea-start[859]: 100 2391 0 2354 100 37 19508 306 0100 2391 0 2354 100 37 19504 306 0100 2391 0 2354 100 37 19501 306 01047buildbot # [ 23.282107] setup-gitea-start[859]: * Connection #0 to host localhost:3742 left intact1048buildbot # [ 23.283665] setup-gitea-start[859]: {"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:05:06Z","updated_at":"2026-08-23T03:05:06Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}1049buildbot # [ 23.312227] setup-gitea-start[898]: + echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45226 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:06 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 19508 306 0\r100 2391 0 2354 100 37 19504 306 0\r100 2391 0 2354 100 37 19501 306 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:05:06Z","updated_at":"2026-08-23T03:05:06Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1050buildbot # [ 23.356763] setup-gitea-start[899]: + grep -q '"id"'1051buildbot # [ 23.358207] setup-gitea-start[859]: + echo 'Repository created successfully'1052buildbot # [ 23.359439] setup-gitea-start[859]: Repository created successfully1053buildbot # [ 23.360557] setup-gitea-start[859]: + echo 'Adding buildbot-nix topic to repository...'1054buildbot # [ 23.362004] setup-gitea-start[859]: Adding buildbot-nix topic to repository...1055buildbot # [ 23.363650] setup-gitea-start[900]: ++ curl -v -X PUT -H 'Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2' -H 'Content-Type: application/json' -d '{"topics":["buildbot-nix"]}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/topics1056buildbot # [ 23.407688] gitea[749]: 2026/08/23 03:05:07 HTTPRequest [I] router: completed PUT /api/v1/repos/gitea-admin/test-flake/topics for [::1]:45232, 204 No Content in 20.1ms @ repo/topic.go:75(repo.UpdateTopics)1057buildbot # [ 23.413288] setup-gitea-start[859]: + TOPIC_RESPONSE=$'* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45232 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:07 GMT\r\n< \r\n\r100 27 0 0 100 27 0 1207 0\r100 27 0 0 100 27 0 1181 0\r100 27 0 0 100 27 0 1174 0\n* Connection #0 to host localhost:3742 left intact'1058buildbot # [ 23.428866] setup-gitea-start[859]: + echo $'Topic response: * Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 45232 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:05:07 GMT\r\n< \r\n\r100 27 0 0 100 27 0 1207 0\r100 27 0 0 100 27 0 1181 0\r100 27 0 0 100 27 0 1174 0\n* Connection #0 to host localhost:3742 left intact'1059buildbot # [ 23.444090] setup-gitea-start[859]: Topic response: * Host localhost:3742 was resolved.1060buildbot # [ 23.445285] setup-gitea-start[859]: * IPv6: ::11061buildbot # [ 23.446018] setup-gitea-start[859]: * IPv4: 127.0.0.11062buildbot # [ 23.446824] setup-gitea-start[859]: * Trying [::1]:3742...1063buildbot # [ 23.448232] setup-gitea-start[859]: * Established connection to localhost (::1 port 3742) from ::1 port 452321064buildbot # [ 23.449644] setup-gitea-start[859]: % Total % Received % Xferd Average Speed Time Time Time Current1065buildbot # [ 23.451105] setup-gitea-start[859]: Dload Upload Total Spent Left Speed1066buildbot # [ 23.452855] setup-gitea-start[859]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1067buildbot # [ 23.454952] setup-gitea-start[859]: > PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.11068buildbot # [ 23.456323] setup-gitea-start[859]: > Host: localhost:37421069buildbot # [ 23.457414] setup-gitea-start[859]: > User-Agent: curl/8.21.01070buildbot # [ 23.458302] setup-gitea-start[859]: > Accept: */*1071buildbot # [ 23.459096] setup-gitea-start[859]: > Authorization: token b54936d9fd70f2b678c18924f0e999604be367a21072buildbot # [ 23.460824] setup-gitea-start[859]: > Content-Type: application/json1073buildbot # [ 23.461770] setup-gitea-start[859]: > Content-Length: 271074buildbot # [ 23.462805] setup-gitea-start[859]: >1075buildbot # [ 23.463429] setup-gitea-start[859]: } [27 bytes data]1076buildbot # [ 23.465265] setup-gitea-start[859]: * upload completely sent off: 27 bytes1077buildbot # [ 23.466163] setup-gitea-start[859]: < HTTP/1.1 204 No Content1078buildbot # [ 23.466941] setup-gitea-start[859]: < Cache-Control: max-age=0, private, must-revalidate1079buildbot # [ 23.467979] setup-gitea-start[859]: < X-Content-Type-Options: nosniff1080buildbot # [ 23.468946] setup-gitea-start[859]: < X-Frame-Options: SAMEORIGIN1081buildbot # [ 23.470322] setup-gitea-start[859]: < Date: Sun, 23 Aug 2026 03:05:07 GMT1082buildbot # [ 23.471377] setup-gitea-start[859]: <1083buildbot # [ 23.471966] setup-gitea-start[859]: 100 27 0 0 100 27 0 1207 0100 27 0 0 100 27 0 1181 0100 27 0 0 100 27 0 1174 01084buildbot # [ 23.475367] setup-gitea-start[859]: * Connection #0 to host localhost:3742 left intact1085buildbot # [ 23.476927] setup-gitea-start[859]: + rm -rf /tmp/test-flake1086buildbot # [ 23.478457] setup-gitea-start[859]: + mkdir -p /tmp/test-flake1087buildbot # [ 23.484728] setup-gitea-start[859]: + cd /tmp/test-flake1088buildbot # [ 23.486055] setup-gitea-start[859]: + git init1089buildbot # [ 23.509850] setup-gitea-start[904]: hint: Using 'master' as the name for the initial branch. This default branch name1090buildbot # [ 23.511301] setup-gitea-start[904]: hint: will change to "main" in Git 3.0. To configure the initial branch name1091buildbot # [ 23.512784] setup-gitea-start[904]: hint: to use in all of your new repositories, which will suppress this warning,1092buildbot # [ 23.514329] setup-gitea-start[904]: hint: call:1093buildbot # [ 23.515039] setup-gitea-start[904]: hint:1094buildbot # [ 23.515778] setup-gitea-start[904]: hint: git config --global init.defaultBranch <name>1095buildbot # [ 23.517162] setup-gitea-start[904]: hint:1096buildbot # [ 23.517770] setup-gitea-start[904]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and1097buildbot # [ 23.519026] setup-gitea-start[904]: hint: 'development'. The just-created branch can be renamed via this command:1098buildbot # [ 23.521157] setup-gitea-start[904]: hint:1099buildbot # [ 23.522169] setup-gitea-start[904]: hint: git branch -m <name>1100buildbot # [ 23.523051] setup-gitea-start[904]: hint:1101buildbot # [ 23.524383] setup-gitea-start[904]: hint: Disable this message with "git config set advice.defaultBranchName false"1102buildbot # [ 23.526206] setup-gitea-start[904]: Initialized empty Git repository in /tmp/test-flake/.git/1103buildbot # [ 23.527551] setup-gitea-start[859]: + git config user.name 'Test User'1104buildbot # [ 23.534537] setup-gitea-start[859]: + git config user.email test@example.com1105buildbot # [ 23.543521] setup-gitea-start[859]: + cat1106buildbot # [ 23.552402] setup-gitea-start[859]: + cat1107buildbot # [ 23.559740] setup-gitea-start[859]: + git add flake.nix buildbot-nix.toml1108buildbot # [ 23.572579] setup-gitea-start[859]: + git commit -m 'Initial commit'1109buildbot # [ 23.602177] setup-gitea-start[910]: [master (root-commit) 730339a] Initial commit1110buildbot # [ 23.603553] setup-gitea-start[910]: 2 files changed, 24 insertions(+)1111buildbot # [ 23.605838] setup-gitea-start[910]: create mode 100644 buildbot-nix.toml1112buildbot # [ 23.608804] setup-gitea-start[910]: create mode 100644 flake.nix1113buildbot # [ 23.609994] setup-gitea-start[859]: + echo 'Verifying repository exists...'1114buildbot # [ 23.611627] setup-gitea-start[859]: Verifying repository exists...1115buildbot # [ 23.613735] setup-gitea-start[917]: ++ curl -s -H 'Authorization: token b54936d9fd70f2b678c18924f0e999604be367a2' http://localhost:3742/api/v1/repos/gitea-admin/test-flake1116buildbot # [ 23.654974] gitea[749]: 2026/08/23 03:05:07 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake for [::1]:45242, 200 OK in 11.3ms @ repo/repo.go:498(repo.Get)1117buildbot # [ 23.661554] setup-gitea-start[859]: + REPO_CHECK='{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:05:06Z","updated_at":"2026-08-23T03:05:07Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1118buildbot # [ 23.690441] setup-gitea-start[918]: + echo '{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:05:06Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:05:06Z","updated_at":"2026-08-23T03:05:07Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1119buildbot # [ 23.719259] setup-gitea-start[919]: + grep -q '"id"'1120buildbot # [ 23.726392] setup-gitea-start[859]: + echo 'Repository confirmed to exist, pushing code...'1121buildbot # [ 23.727630] setup-gitea-start[859]: Repository confirmed to exist, pushing code...1122buildbot # [ 23.728907] setup-gitea-start[859]: + git remote add origin http://gitea-admin:testpassword123@localhost:3742/gitea-admin/test-flake.git1123buildbot # [ 23.741505] setup-gitea-start[859]: + git push -u origin master1124buildbot # [ 23.808431] gitea[749]: 2026/08/23 03:05:07 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:45258, 401 Unauthorized in 1.6ms @ repo/githttp.go:455(repo.GetInfoRefs)1125buildbot # [ 23.839811] gitea[749]: 2026/08/23 03:05:07 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:45258, 200 OK in 27.7ms @ repo/githttp.go:455(repo.GetInfoRefs)1126buildbot # [ 24.078231] gitea[749]: 2026/08/23 03:05:07 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 3.2ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1127buildbot # [ 24.432822] gitea[749]: 2026/08/23 03:05:08 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 47.0ms @ private/hook_post_receive.go:101(private.HookPostReceive)1128buildbot # [ 24.452806] gitea[749]: 2026/08/23 03:05:08 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:45258, 200 OK in 593.3ms @ repo/githttp.go:438(repo.ServiceReceivePack)1129buildbot # [ 24.457610] setup-gitea-start[921]: To http://localhost:3742/gitea-admin/test-flake.git1130buildbot # [ 24.458693] setup-gitea-start[921]: * [new branch] master -> master1131buildbot # [ 24.466662] setup-gitea-start[921]: branch 'master' set up to track 'origin/master'.1132buildbot # [ 24.470924] systemd[1]: Finished Setup Gitea test environment.1133buildbot # [ 24.475976] systemd[1]: Starting Buildbot Continuous Integration Server....1134buildbot # [ 24.531501] buildbot-master-pre-start[983]: mkdir: created directory '/var/lib/buildbot/master'1135buildbot: (finished: waiting for unit setup-gitea.service, in 2.22 seconds)1136buildbot: waiting for unit multi-user.target1137buildbot # [ 30.126599] buildbot-master-pre-start[985]: updating existing installation1138buildbot # [ 30.126736] buildbot-master-pre-start[985]: not touching existing buildbot.tac1139buildbot # [ 30.126772] buildbot-master-pre-start[985]: creating buildbot.tac.new instead1140buildbot # [ 30.126805] buildbot-master-pre-start[985]: creating /var/lib/buildbot/master/master.cfg.sample1141buildbot # [ 30.126837] buildbot-master-pre-start[985]: creating database (postgresql://@/buildbot)1142buildbot # [ 30.126896] buildbot-master-pre-start[985]: buildmaster configured in /var/lib/buildbot/master1143buildbot # [ 30.597307] systemd[1]: Started Buildbot Continuous Integration Server..1144buildbot # [ 30.604998] systemd[1]: Started Buildbot Worker..1145buildbot # [ 30.606929] systemd[1]: Reached target Multi-User System.1146buildbot # [ 30.607771] systemd[1]: Startup finished in 920ms (kernel) + 4.543s (initrd) + 25.143s (userspace) = 30.606s.1147buildbot: (finished: waiting for unit multi-user.target, in 6.80 seconds)1148subtest: Gitea service is accessible1149buildbot: waiting for TCP port 3742 on localhost1150buildbot # Connection to localhost (::1) 3742 port [tcp/cst-port] succeeded!1151buildbot: (finished: waiting for TCP port 3742 on localhost, in 0.10 seconds)1152??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1153 File "/nix/store/fj3hhjjdra1gp3haf9l1g8ms70afp8c9-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391154buildbot: waiting for success: curl --fail http://localhost:3742/api/v1/version1155??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1156 File "/nix/store/fj3hhjjdra1gp3haf9l1g8ms70afp8c9-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391157buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1158buildbot # Dload Upload Total Spent Left Speed1159buildbot # 0 0 0 0 0 0 0 0 0100 21 100 21 0 0 [ 31.692687] gitea[749]: 2026/08/23 03:05:15 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:35398, 200 OK in 0.6ms @ misc/version.go:15(misc.Version)1160buildbot # 879 0 0100 21 100 21 0 0 618 0 0100 21 100 21 0 0 490 0 01161buildbot: (finished: waiting for success: curl --fail http://localhost:3742/api/v1/version, in 0.14 seconds)1162(finished: subtest: Gitea service is accessible, in 0.24 seconds)1163subtest: Gitea token was created1164buildbot: must succeed: test -f /var/lib/buildbot/gitea-token1165buildbot: (finished: must succeed: test -f /var/lib/buildbot/gitea-token, in 0.04 seconds)1166buildbot: must succeed: cat /tmp/gitea-token1167buildbot: (finished: must succeed: cat /tmp/gitea-token, in 0.07 seconds)1168(finished: subtest: Gitea token was created, in 0.11 seconds)1169subtest: Master and worker services start1170buildbot: waiting for unit buildbot-master.service1171buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds)1172buildbot: waiting for unit buildbot-worker.service1173buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds)1174buildbot: waiting for TCP port 8010 on localhost1175buildbot # [ 32.544123] twistd[1069]: Starting worker local-worker-0001176buildbot # [ 32.544249] twistd[1069]: 2026-08-23T03:05:15+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1177buildbot # [ 32.547726] twistd[1069]: 2026-08-23T03:05:16+0000 [-] Loaded.1178buildbot # [ 32.549744] twistd[1069]: 2026-08-23T03:05:16+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin/python3.14 3.14.7) starting up.1179buildbot # [ 32.553377] twistd[1069]: 2026-08-23T03:05:16+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1180buildbot # [ 32.555539] twistd[1069]: 2026-08-23T03:05:16+0000 [-] Starting Worker -- version: 2026.08.231181buildbot # [ 32.558516] twistd[1069]: 2026-08-23T03:05:16+0000 [-] recording hostname in twistd.hostname1182buildbot # [ 32.560161] twistd[1069]: 2026-08-23T03:05:16+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf6aa35a70050>1183buildbot # [ 32.567455] twistd[1069]: 2026-08-23T03:05:16+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xf6aa35a70590> in 1.5203372559056816 seconds.1184buildbot # [ 32.570960] twistd[1069]: 2026-08-23T03:05:16+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xf6aa35a70050>1185buildbot # [ 34.093412] twistd[1069]: 2026-08-23T03:05:17+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf6aa35a70050>1186buildbot # [ 34.097373] twistd[1069]: 2026-08-23T03:05:17+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xf6aa35a70590> in 2.8072399593650403 seconds.1187buildbot # [ 34.100966] twistd[1069]: 2026-08-23T03:05:17+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xf6aa35a70050>1188buildbot # [ 34.414002] twistd[1068]: 2026-08-23T03:05:15+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1189buildbot # [ 34.415977] twistd[1068]: 2026-08-23T03:05:18+0000 [-] Loaded.1190buildbot # [ 34.417004] twistd[1068]: 2026-08-23T03:05:18+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin/python3.14 3.14.7) starting up.1191buildbot # [ 34.419546] twistd[1068]: 2026-08-23T03:05:18+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1192buildbot # [ 34.422604] twistd[1068]: 2026-08-23T03:05:18+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01193buildbot # [ 34.432631] twistd[1068]: 2026-08-23T03:05:18+0000 [-] Loading configuration from '/nix/store/fv4cr9rjvk5qiz3p8yrphbsh51q6l82w-master.cfg'1194buildbot # [ 35.326632] twistd[1068]: 2026-08-23T03:05:18+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1195buildbot # [ 35.427705] twistd[1068]: 2026-08-23T03:05:19+0000 [-] adding 2 new builders, removing 01196buildbot # [ 35.460093] twistd[1068]: 2026-08-23T03:05:19+0000 [-] adding 4 new services, removing 01197buildbot # [ 35.621697] twistd[1068]: 2026-08-23T03:05:19+0000 [-] adding 4 new schedulers, removing 01198buildbot # [ 35.651064] twistd[1068]: 2026-08-23T03:05:19+0000 [-] PeriodicWithStartup scheduler <reload-gitea-projects-bidaily>: missed scheduled build time - building immediately1199buildbot # [ 35.721979] twistd[1068]: 2026-08-23T03:05:19+0000 [-] BuildbotSite starting on 80101200buildbot # [ 35.723070] twistd[1068]: 2026-08-23T03:05:19+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0xeb8ebd6abcb0>1201buildbot # [ 35.728136] twistd[1068]: 2026-08-23T03:05:19+0000 [-] adding 5 new workers, removing 01202buildbot # [ 35.738739] twistd[1068]: 2026-08-23T03:05:19+0000 [-] added buildset 1 to database1203buildbot # [ 35.758875] twistd[1068]: 2026-08-23T03:05:19+0000 [-] Starting Worker -- version: 2026.08.231204buildbot # [ 35.760363] twistd[1068]: 2026-08-23T03:05:19+0000 [-] recording hostname in twistd.hostname1205buildbot # [ 35.761498] twistd[1068]: 2026-08-23T03:05:19+0000 [-] message from master: attached1206buildbot # [ 35.765907] twistd[1068]: 2026-08-23T03:05:19+0000 [-] Got workerinfo from '__Janitor'1207buildbot # [ 35.772946] twistd[1068]: 2026-08-23T03:05:19+0000 [-] bot attached1208buildbot # [ 35.773945] twistd[1068]: 2026-08-23T03:05:19+0000 [-] Worker __Janitor attached to __Janitor1209buildbot # [ 35.775047] twistd[1068]: 2026-08-23T03:05:19+0000 [-] message from master: attached1210buildbot # [ 35.812294] twistd[1068]: 2026-08-23T03:05:19+0000 [-] PBServerFactory starting on 99891211buildbot # [ 35.813421] twistd[1068]: 2026-08-23T03:05:19+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0xeb8ebc564c20>1212buildbot # [ 35.842322] twistd[1068]: 2026-08-23T03:05:19+0000 [-] BuildMaster is running1213buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1214buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.28 seconds)1215buildbot: waiting for success: curl --fail -v --head http://localhost:80101216buildbot # * Host localhost:8010 was resolved.1217buildbot # * IPv6: ::11218buildbot # * IPv4: 127.0.0.11219buildbot # * Trying [::1]:8010...1220buildbot # * connect to ::1 port 8010 from ::1 port 58002 failed: Connection refused1221buildbot # * Trying 127.0.0.1:8010...1222buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 383601223buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1224buildbot # Dload Upload Total Spent Left Speed1225buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1226buildbot # > HEAD / HTTP/1.11227buildbot # > Host: localhost:80101228buildbot # > User-Agent: curl/8.21.01229buildbot # > Accept: */*1230buildbot # >1231buildbot # * Request completely sent off1232buildbot # < HTTP/1.1 200 OK1233buildbot # < Date: Sun, 23 Aug 2026 03:05:20 GMT1234buildbot # < Content-Type: text/html1235buildbot # < Cache-Control: public,max-age=01236buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MTIwfQ.gn8DV4WEq_yh7lGxv9pqsdC5lHfQXWKzBIoqvQ3oOEQ; Path=/1237buildbot # <1238buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01239buildbot # * Connection #0 to host localhost:8010 left intact1240buildbot: (finished: waiting for success: curl --fail -v --head http://localhost:8010, in 0.11 seconds)1241(finished: subtest: Master and worker services start, in 4.55 seconds)1242subtest: Project is registered in buildbot1243??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1244 File "/nix/store/fj3hhjjdra1gp3haf9l1g8ms70afp8c9-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281245buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1246buildbot # * Host localhost:8010 was resolved.1247buildbot # * IPv6: ::11248buildbot # * IPv4: 127.0.0.11249buildbot # * Trying [::1]:8010...1250buildbot # * connect to ::1 port 8010 from ::1 port 58004 failed: Connection refused1251buildbot # * Trying 127.0.0.1:8010...1252buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 383661253buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1254buildbot # Dload Upload Total Spent Left Speed1255buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1256buildbot # > GET /api/v2/projects HTTP/1.11257buildbot # > Host: localhost:80101258buildbot # > User-Agent: curl/8.21.01259buildbot # > Accept: */*1260buildbot # >1261buildbot # * Request completely sent off1262buildbot # < HTTP/1.1 200 OK1263buildbot # < Date: Sun, 23 Aug 2026 03:05:20 GMT1264buildbot # < Content-Type: text/plain; charset=utf-81265buildbot # < Content-Length: 531266buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MTIwfQ.gn8DV4WEq_yh7lGxv9pqsdC5lHfQXWKzBIoqvQ3oOEQ; Path=/1267buildbot # <1268buildbot # { [53 bytes data]1269buildbot # 100 53 100 53 0 0 2247 0 0100 53 100 53 0 0 2040 0 0100 53 100 53 0 0 1872 0 01270buildbot # * Connection #0 to host localhost:8010 left intact1271buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.08 seconds)1272buildbot # [ 36.910169] twistd[1069]: 2026-08-23T03:05:20+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf6aa35a70050>1273buildbot # [ 36.927691] twistd[1068]: 2026-08-23T03:05:20+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=34604)1274buildbot # [ 36.937638] twistd[1069]: 2026-08-23T03:05:20+0000 [Broker,client] message from master: attached1275buildbot # [ 36.950947] twistd[1068]: 2026-08-23T03:05:20+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1276buildbot # [ 36.970639] twistd[1068]: 2026-08-23T03:05:20+0000 [-] bot attached1277buildbot # [ 36.977892] twistd[1068]: 2026-08-23T03:05:20+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to reload-gitea-projects1278buildbot # [ 36.987730] twistd[1069]: 2026-08-23T03:05:20+0000 [Broker,client] message from master: attached1279buildbot # [ 36.994938] twistd[1069]: 2026-08-23T03:05:20+0000 [Broker,client] Connected to buildmaster; worker is ready1280buildbot # [ 37.002165] twistd[1069]: 2026-08-23T03:05:20+0000 [Broker,client] sending application-level keepalives every 600 seconds1281buildbot # [ 37.035423] twistd[1068]: 2026-08-23T03:05:20+0000 [-] starting build <Build reload-gitea-projects number:None results:success> using worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=AVAILABLE>1282buildbot # [ 37.044153] twistd[1068]: 2026-08-23T03:05:20+0000 [-] <Build reload-gitea-projects number:None results:success>.startBuild1283buildbot # [ 37.091053] twistd[1068]: 2026-08-23T03:05:20+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1284buildbot # [ 37.095846] twistd[1068]: 2026-08-23T03:05:20+0000 [-] starting build <Build reload-gitea-projects number:1 results:success>.. pinging the worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=BUILDING>1285buildbot # [ 37.100354] twistd[1068]: 2026-08-23T03:05:20+0000 [-] sending ping1286buildbot # [ 37.102854] twistd[1069]: 2026-08-23T03:05:20+0000 [Broker,client] message from master: ping1287buildbot # [ 37.105387] twistd[1068]: 2026-08-23T03:05:20+0000 [Broker,0,127.0.0.1] ping finished: success1288buildbot # [ 37.171748] gitea[749]: 2026/08/23 03:05:20 HTTPRequest [I] router: completed GET /api/v1/user/repos?limit=100 for [::1]:35406, 200 OK in 14.8ms @ user/repo.go:89(user.ListMyRepos)1289buildbot # [ 37.186868] gitea[749]: 2026/08/23 03:05:20 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/topics for [::1]:35412, 200 OK in 10.2ms @ repo/topic.go:21(repo.ListTopics)1290buildbot # [ 37.190445] twistd[1068]: 2026-08-23T03:05:20+0000 [buildbot_nix.gitea_projects#info] Updated backend gitea_projects with 1 projects1291buildbot # [ 37.194339] twistd[1068]: 2026-08-23T03:05:20+0000 [-] releaseLocks(ReloadGiteaProjects(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), PosixPath('gitea-project-cache.json'), backend=<buildbot_nix.gitea_projects.GiteaBackend object at 0xeb8ebdc13cb0>)): []1292buildbot # [ 37.210149] twistd[1068]: 2026-08-23T03:05:20+0000 [-] step 'reload_gitea_projects' complete: success (None)1293buildbot # [ 37.233776] gitea[749]: 2026/08/23 03:05:20 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks?limit=100 for [::1]:35426, 200 OK in 11.3ms @ repo/hook.go:26(repo.ListHooks)1294buildbot # [ 37.236239] twistd[1068]: 2026-08-23T03:05:20+0000 [-] creating hook for gitea-admin/test-flake1295buildbot # [ 37.253622] twistd[1068]: 2026-08-23T03:05:20+0000 [-] beginning configuration update1296buildbot # [ 37.254744] gitea[749]: 2026/08/23 03:05:20 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:35440, 201 Created in 13.9ms @ repo/hook.go:200(repo.CreateHook)1297buildbot # [ 37.258773] twistd[1068]: 2026-08-23T03:05:20+0000 [-] Loading configuration from '/nix/store/fv4cr9rjvk5qiz3p8yrphbsh51q6l82w-master.cfg'1298buildbot # [ 37.263673] twistd[1068]: 2026-08-23T03:05:20+0000 [-] releaseLocks(CreateGiteaProjectHooks(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), 'http://localhost/')): []1299buildbot # [ 37.272541] twistd[1068]: 2026-08-23T03:05:20+0000 [buildbot_nix.gitea_projects#info] Loading 1 cached repositories: [gitea-admin/test-flake]1300buildbot # [ 37.279229] twistd[1068]: 2026-08-23T03:05:20+0000 [-] step 'create_gitea_project_hooks' complete: success (None)1301buildbot # [ 37.283079] twistd[1068]: 2026-08-23T03:05:20+0000 [-] <Build reload-gitea-projects number:1 results:success>: build finished1302buildbot # [ 37.291738] twistd[1068]: 2026-08-23T03:05:20+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1303buildbot # [ 37.333394] twistd[1068]: 2026-08-23T03:05:20+0000 [-] adding 8 new builders, removing 01304buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1305buildbot # [ 37.532970] twistd[1068]: 2026-08-23T03:05:21+0000 [-] adding 12 new schedulers, removing 01306buildbot # * Host localhost:8010 was resolved.1307buildbot # * IPv6: ::11308buildbot # * IPv4: 127.0.0.11309buildbot # * Trying [::1]:8010...1310buildbot # * connect to ::1 port 8010 from ::1 port 58012 failed: Connection refused1311buildbot # * Trying 127.0.0.1:8010...1312buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 383801313buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1314buildbot # Dload Upload Total Spent Left Speed1315buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1316buildbot # > GET /api/v2/projects HTTP/1.11317buildbot # > Host: localhost:80101318buildbot # > User-Agent: curl/8.21.01319buildbot # > Accept: */*1320buildbot # >1321buildbot # * Request completely sent off1322buildbot # < HTTP/1.1 200 OK1323buildbot # < Date: Sun, 23 Aug 2026 03:05:21 GMT1324buildbot # < Content-Type: text/plain; charset=utf-81325buildbot # < Content-Length: 2901326buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MTIxfQ.5i8cgixoyFLNkOKlxMnEQl7tsebrclLjQ9eFeVSKQ_s; Path=/1327buildbot # <1328buildbot # { [290 bytes data]1329buildbot # 100 290 100 290 0 0 6341 0 0100 290 100 290 0 0 5754 0 0100 290 100 290 0 0 5261 0 01330buildbot # * Connection #0 to host localhost:8010 left intact1331buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.20 seconds)1332(finished: subtest: Project is registered in buildbot, in 1.29 seconds)1333subtest: Verify webhook was created by buildbot1334buildbot: waiting for success: 1335 TOKEN=$(cat /tmp/gitea-token)1336 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1337 1338buildbot # [ 37.806746] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-build1339buildbot # [ 37.810076] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-dependency-failed1340buildbot # [ 37.814920] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-eval1341buildbot # [ 37.816761] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-effect1342buildbot # [ 37.818593] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-cached-failure1343buildbot # [ 37.820616] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-register-gcroot1344buildbot # [ 37.822405] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-scheduled-effect1345buildbot # [ 37.824281] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-failed-eval1346buildbot # [ 37.829832] twistd[1068]: 2026-08-23T03:05:21+0000 [Broker,0,127.0.0.1] configuration update complete (took 0.557 seconds)1347buildbot # [ 37.831809] gitea[749]: 2026/08/23 03:05:21 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:35444, 200 OK in 32.1ms @ repo/hook.go:26(repo.ListHooks)1348buildbot # [ 37.834441] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1349buildbot # [ 37.835734] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1350buildbot # [ 37.837195] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1351buildbot # [ 37.838442] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1352buildbot # [ 37.839628] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1353buildbot # [ 37.841012] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1354buildbot # [ 37.842192] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1355buildbot # [ 37.843426] twistd[1069]: 2026-08-23T03:05:21+0000 [Broker,client] message from master: attached1356buildbot: (finished: waiting for success: 1357 TOKEN=$(cat /tmp/gitea-token)1358 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1359 , in 0.16 seconds)1360(finished: subtest: Verify webhook was created by buildbot, in 0.16 seconds)1361subtest: Push new commit to trigger webhook1362buildbot: must succeed: 1363 cd /tmp/test-flake1364 echo '# Updated via webhook test' >> flake.nix1365 git add flake.nix1366 git commit -m 'Test commit to trigger webhook'1367 git push origin master1368 1369buildbot # [ 37.930128] gitea[749]: 2026/08/23 03:05:21 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:35450, 401 Unauthorized in 1.1ms @ repo/githttp.go:455(repo.GetInfoRefs)1370buildbot # [ 37.961201] gitea[749]: 2026/08/23 03:05:21 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:35450, 200 OK in 27.2ms @ repo/githttp.go:455(repo.GetInfoRefs)1371buildbot # Enumerating objects: 5, done.1372buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1373buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1374buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 349 bytes | 349.00 KiB/s, done.1375buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)1376buildbot # [ 38.256621] gitea[749]: 2026/08/23 03:05:21 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 2.8ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1377buildbot # [ 38.615228] gitea[749]: 2026/08/23 03:05:22 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 27.4ms @ private/hook_post_receive.go:101(private.HookPostReceive)1378buildbot # [ 38.635918] gitea[749]: 2026/08/23 03:05:22 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:35450, 200 OK in 650.1ms @ repo/githttp.go:438(repo.ServiceReceivePack)1379buildbot # To http://localhost:3742/gitea-admin/test-flake.git1380buildbot # 730339a..de980b2 master -> master1381buildbot: (finished: must succeed: 1382 cd /tmp/test-flake1383 echo '# Updated via webhook test' >> flake.nix1384 git add flake.nix1385 git commit -m 'Test commit to trigger webhook'1386 git push origin master1387 , in 0.80 seconds)1388(finished: subtest: Push new commit to trigger webhook, in 0.80 seconds)1389subtest: Webhook triggers nix-eval build1390buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1391buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1392buildbot # Dload Upload Total Spent Left Speed1393buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 30140 0 0100 411 100 411 0 0 25566 0 0100 411 100 411 0 0 20709 0 01394buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1395buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1396buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1397buildbot # Dload Upload Total Spent Left Speed1398buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 71243 0 0100 937 100 937 0 0 60133 0 0100 937 100 937 0 0 51241 0 01399buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds)1400buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1401buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1402buildbot # Dload Upload Total Spent Left Speed1403buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 20857 0 0100 411 100 411 0 0 16624 0 0100 411 100 411 0 0 12980 0 01404buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1405buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1406buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1407buildbot # Dload Upload Total Spent Left Speed1408buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 33838 0 0100 937 100 937 0 0 30909 0 0100 937 100 937 0 0 24721 0 01409buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1410buildbot # [ 40.857650] twistd[1068]: 2026-08-23T03:05:24+0000 [_GenericHTTPChannelProtocol,8,127.0.0.1] Received event 'push' from gitea1411buildbot # [ 40.900118] twistd[1068]: 2026-08-23T03:05:24+0000 [-] added change with revision de980b2f0a21577428efbb066b03a139d2e75b20 to database1412buildbot # [ 40.903811] twistd[1068]: 2026-08-23T03:05:24+0000 [-] injected change 11413buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1414buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1415buildbot # Dload Upload Total Spent Left Speed1416buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 22804 0 0100 411 100 411 0 0 18714 0 0100 411 100 411 0 0 16055 0 01417buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1418buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1419buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1420buildbot # Dload Upload Total Spent Left Speed1421buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 53711 0 0100 937 100 937 0 0 45897 0 0100 937 100 937 0 0 39758 0 01422buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1423buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1424buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1425buildbot # Dload Upload Total Spent Left Speed1426buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 32885 0 0100 411 100 411 0 0 24299 0 0100 411 100 411 0 0 19921 0 01427buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1428buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1429buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1430buildbot # Dload Upload Total Spent Left Speed1431buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51418 0 0100 937 100 937 0 0 44691 0 0100 937 100 937 0 0 39105 0 01432buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1433buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1434buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1435buildbot # Dload Upload Total Spent Left Speed1436buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 22659 0 0100 411 100 411 0 0 17250 0 0100 411 100 411 0 0 13850 0 01437buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1438buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1439buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1440buildbot # Dload Upload Total Spent Left Speed1441buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 64505 0 0100 937 100 937 0 0 52575 0 0100 937 100 937 0 0 45370 0 01442buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1443buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1444buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1445buildbot # Dload Upload Total Spent Left Speed1446buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 28874 0 0100 411 100 411 0 0 20861 0 0100 411 100 411 0 0 16563 0 01447buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1448buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1449buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1450buildbot # Dload Upload Total Spent Left Speed1451buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 63242 0 0100 937 100 937 0 0 53362 0 0100 937 100 937 0 0 45569 0 01452buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1453buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1454buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1455buildbot # Dload Upload Total Spent Left Speed1456buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1457buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1458buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 31044 0 0100 411 100 411 0 0 30519 0 0100 411 100 411 0 0 30052 0 01459buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1460buildbot # Dload Upload Total Spent Left Speed1461buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 48685 0 0100 937 100 937 0 0 40018 0 0100 937 100 937 0 0 31417 0 01462buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.09 seconds)1463buildbot # [ 45.932295] twistd[1068]: 2026-08-23T03:05:29+0000 [-] added buildset 2 to database1464buildbot # [ 46.091253] twistd[1068]: 2026-08-23T03:05:29+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1465buildbot # [ 46.103879] twistd[1068]: 2026-08-23T03:05:29+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild1466buildbot # [ 46.185383] twistd[1068]: 2026-08-23T03:05:29+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1467buildbot # [ 46.191299] twistd[1068]: 2026-08-23T03:05:29+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1468buildbot # [ 46.196427] twistd[1068]: 2026-08-23T03:05:29+0000 [-] sending ping1469buildbot # [ 46.200131] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] message from master: ping1470buildbot # [ 46.201465] twistd[1068]: 2026-08-23T03:05:29+0000 [Broker,0,127.0.0.1] ping finished: success1471buildbot # [ 46.224088] twistd[1068]: 2026-08-23T03:05:29+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1472buildbot # [ 46.232436] twistd[1068]: 2026-08-23T03:05:29+0000 [-] command '['git', '--version']' in dir 'build'1473buildbot # [ 46.233876] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command 0): startCommand:shell1474buildbot # [ 46.235188] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1475buildbot # [ 46.240136] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', '--version']): git --version1476buildbot # [ 46.241609] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1477buildbot # [ 46.246409] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1478buildbot # [ 46.247996] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1479buildbot # [ 46.250916] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', '--version']): using PTY: False1480buildbot # [ 46.267238] twistd[1069]: 2026-08-23T03:05:29+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0351381481buildbot # [ 46.269295] twistd[1069]: 2026-08-23T03:05:29+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a727b0>1482buildbot # [ 46.289350] twistd[1068]: 2026-08-23T03:05:29+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01483buildbot # [ 46.326250] twistd[1068]: 2026-08-23T03:05:29+0000 [-] <RemoteCommand 'stat' at 258998276346208>: RemoteCommand.run [1]1484buildbot # [ 46.337839] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command 1): startCommand:stat1485buildbot # [ 46.339147] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'1486buildbot # [ 46.346357] twistd[1069]: 2026-08-23T03:05:29+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf6aa361afb60>1487buildbot # [ 46.350071] twistd[1068]: 2026-08-23T03:05:29+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 258998276346208> rc=21488buildbot # [ 46.358084] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteCommand 'listdir' at 258998276790928>: RemoteCommand.run [2]1489buildbot # [ 46.390517] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 2): startCommand:listdir1490buildbot # [ 46.393809] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xf6aa35a71010>1491buildbot # [ 46.398031] twistd[1068]: 2026-08-23T03:05:30+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 258998276790928> rc=01492buildbot # [ 46.403385] twistd[1068]: 2026-08-23T03:05:30+0000 [-] No git repo present, making full clone1493buildbot # [ 46.405603] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [3]1494buildbot # [ 46.408895] twistd[1068]: 2026-08-23T03:05:30+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'1495buildbot # [ 46.441786] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 3): startCommand:shell1496buildbot # [ 46.447646] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand1497buildbot # [ 46.456169] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake . --progress1498buildbot # [ 46.465295] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1499buildbot # [ 46.471619] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}1500buildbot # [ 46.479324] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']1501buildbot # [ 46.486097] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False1502buildbot # [ 46.551843] gitea[749]: 2026/08/23 03:05:30 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:51134, 200 OK in 8.0ms @ repo/githttp.go:455(repo.GetInfoRefs)1503buildbot # [ 46.563081] gitea[749]: 2026/08/23 03:05:30 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:51134, 200 OK in 7.4ms @ repo/githttp.go:433(repo.ServiceUploadPack)1504buildbot # [ 46.587276] gitea[749]: 2026/08/23 03:05:30 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:51134, 200 OK in 15.4ms @ repo/githttp.go:433(repo.ServiceUploadPack)1505buildbot # [ 46.617962] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.1717091506buildbot # [ 46.625483] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa361096d0>1507buildbot # [ 46.628643] twistd[1068]: 2026-08-23T03:05:30+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=01508buildbot # [ 46.647761] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']'>: RemoteCommand.run [4]1509buildbot # [ 46.650682] twistd[1068]: 2026-08-23T03:05:30+0000 [-] command '['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']' in dir 'build'1510buildbot # [ 46.667141] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 4): startCommand:shell1511buildbot # [ 46.668532] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): RunProcess._startCommand1512buildbot # [ 46.674047] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): git checkout -f de980b2f0a21577428efbb066b03a139d2e75b201513buildbot # [ 46.678828] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1514buildbot # [ 46.682426] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): watching logfiles {}1515buildbot # [ 46.684806] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): argv: [b'git', b'checkout', b'-f', b'de980b2f0a21577428efbb066b03a139d2e75b20']1516buildbot # [ 46.689665] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): using PTY: False1517buildbot # [ 46.702619] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): command finished with signal None, exit code 0, elapsedTime: 0.0363081518buildbot # [ 46.705542] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa3610a850>1519buildbot # [ 46.718218] twistd[1068]: 2026-08-23T03:05:30+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']'> rc=01520buildbot # [ 46.738308] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [5]1521buildbot # [ 46.741693] twistd[1068]: 2026-08-23T03:05:30+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1522buildbot # [ 46.760927] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 5): startCommand:shell1523buildbot # [ 46.764253] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1524buildbot # [ 46.766095] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive1525buildbot # [ 46.771233] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1526buildbot # [ 46.776042] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1527buildbot # [ 46.778122] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']1528buildbot # [ 46.782769] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False1529buildbot # [ 46.896687] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1334051530buildbot # [ 46.901627] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa3607a650>1531buildbot # [ 46.905635] twistd[1068]: 2026-08-23T03:05:30+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=01532buildbot # [ 46.920051] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [6]1533buildbot # [ 46.921582] twistd[1068]: 2026-08-23T03:05:30+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1534buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1535buildbot # [ 46.947053] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 6): startCommand:shell1536buildbot # [ 46.948576] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1537buildbot # [ 46.950101] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1538buildbot # [ 46.951516] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1539buildbot # [ 46.959491] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1540buildbot # [ 46.962452] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1541buildbot # [ 46.964536] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1542buildbot # [ 46.975725] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0287901543buildbot # [ 46.977810] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa3607ab10>1544buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1545buildbot # Dload Upload Total Spent Left Speed1546buildbot # 0 0 0 0 0 0[ 47.004459] twistd[1068]: 2026-08-23T03:05:30+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01547buildbot # 0 0 0100 760 100 760 0 0 37935 0 0100 760 100 760 0 0 32542 0 0100 760 100 760 0 0 27319 0 01548buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1549buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1550buildbot # [ 47.039620] twistd[1068]: 2026-08-23T03:05:30+0000 [-] Got Git revision de980b2f0a21577428efbb066b03a139d2e75b201551buildbot # [ 47.060688] twistd[1068]: 2026-08-23T03:05:30+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []1552buildbot # [ 47.086181] twistd[1068]: 2026-08-23T03:05:30+0000 [-] step 'git' complete: success (None)1553buildbot # [ 47.100597] twistd[1068]: 2026-08-23T03:05:30+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xeb8ebc420910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xeb8ebc425010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xeb8ebc425010>)])1554buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1555buildbot # Dload Upload Total Spent Left Speed1556buildbot # 0 0 0 0 0 0 0 0 0[ 47.136175] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [7]1557buildbot # [ 47.140542] twistd[1068]: 2026-08-23T03:05:30+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1558buildbot # [ 47.142361] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 7): startCommand:shell1559buildbot # 100 937 100 937 0 0 31212 0 0100 937 100 937 0 0 28896 [ 47.155941] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1560buildbot # [ 47.160181] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1561buildbot # [ 47.162621] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1562buildbot # 0 0100 937 100 937 0 0 18546 0 01563buildbot # [ 47.182274] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1564buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.16 seconds)1565buildbot # [ 47.187267] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1566buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1567buildbot # [ 47.193310] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1568buildbot # [ 47.218470] twistd[1068]: 2026-08-23T03:05:30+0000 [twisted.web.client._HTTP11ClientFactory#info] Starting factory _HTTP11ClientFactory(<function HTTPConnectionPool._newConnection.<locals>.quiescentCallback at 0xeb8ebc3352d0>, <HostnameEndpoint localhost:3742>)1569buildbot # [ 47.227624] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0729771570buildbot # [ 47.237515] twistd[1069]: 2026-08-23T03:05:30+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa3609ab10>1571buildbot # [ 47.241754] twistd[1068]: 2026-08-23T03:05:30+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01572buildbot # [ 47.244143] twistd[1068]: 2026-08-23T03:05:30+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [8]1573buildbot # [ 47.250052] twistd[1068]: 2026-08-23T03:05:30+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1574buildbot # [ 47.269499] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command 8): startCommand:shell1575buildbot # [ 47.274280] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1576buildbot # [ 47.293301] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1577buildbot # [ 47.302474] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1578buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1579buildbot # Dload Upload Total Spent Left Spe[ 47.310237] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1580buildbot # ed1581buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 96480 0 0100 1735 100 1735 0 0 84704 0 [ 47.332481] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1582buildbot # 0100 1735 100 1735 0 0 53188 0 01583buildbot # [ 47.351171] twistd[1069]: 2026-08-23T03:05:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1584buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.17 seconds)1585buildbot # [ 47.368211] gitea[749]: 2026/08/23 03:05:31 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/de980b2f0a21577428efbb066b03a139d2e75b20 for [::1]:51146, 201 Created in 136.1ms @ repo/status.go:21(repo.NewCommitStatus)1586buildbot # [ 47.570903] systemd[1]: Started Nix Daemon.1587buildbot # [ 47.670110] nix-daemon[1342]: accepted connection from pid 1339, user buildbot-worker1588buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1589buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1590buildbot # Dload Upload Total Spent Left Speed1591buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 64951 0 0100 760 100 760 0 0 46959 0 0100 760 100 760 0 0 37981 0 01592buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1593buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1594buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1595buildbot # Dload Upload Total Spent Left Speed1596buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54237 0 0100 937 100 937 0 0 45857 0 0100 937 100 937 0 0 39948 0 01597buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1598buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1599buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1600buildbot # Dload Upload Total Spent Left Speed1601buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 111.0k 0 0100 1735 100 1735 0 0 98205 0 0100 1735 100 1735 0 0 85287 0 01602buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1603buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1604buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1605buildbot # Dload Upload Total Spent Left Speed1606buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 36720 0 0100 760 100 760 0 0 30381 0 0100 760 100 760 0 0 26517 0 01607buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1608buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1609buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1610buildbot # Dload Upload Total Spent Left Speed1611buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54164 0 0100 937 100 937 0 0 46609 0 0100 937 100 937 0 0 40824 0 01612buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1613buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1614buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1615buildbot # Dload Upload Total Spent Left Speed1616buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 114.2k 0 0100 1735 100 1735 0 0 98.29k 0 0100 1735 100 1735 0 0 87928 0 01617buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1618buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1619buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1620buildbot # Dload Upload Total Spent Left Speed1621buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 43483 0 0100 760 100 760 0 0 35645 0 0100 760 100 760 0 0 29408 0 01622buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1623buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1624buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1625buildbot # Dload Upload Total Spent Left Speed1626buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 55075 0 0100 937 100 937 0 0 47304 0 0100 937 100 937 0 0 41436 0 01627buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1628buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1629buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1630buildbot # Dload Upload Total Spent Left Speed1631buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 148.5k 0 0100 1735 100 1735 0 0 119.6k 0 0100 1735 100 1735 0 0 101.9k 0 01632buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1633buildbot # [ 51.942167] nix-daemon[1342]: accepted connection from pid 1378, user buildbot-worker1634buildbot # [ 51.973186] nix-daemon[1342]: accepted connection from pid 1339, user buildbot-worker1635buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1636buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1637buildbot # Dload Upload Total Spent Left Speed1638buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 39429 0 0100 760 100 760 0 0 33173 0 0100 760 100 760 0 0 27172 0 01639buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1640buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1641buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1642buildbot # Dload Upload Total Spent Left Speed1643buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 61921 0 0100 937 100 937 0 0 50144 0 0100 937 100 937 0 0 43118 0 01644buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1645buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1646buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1647buildbot # Dload Upload Total Spent Left Speed1648buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 153.2k 0 0100 1735 100 1735 0 0 125.7k 0 0100 1735 100 1735 0 0 105.1k 0 01649buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1650buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1651buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1652buildbot # Dload Upload Total Spent Left Speed1653buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 41866 0 0100 760 100 760 0 0 32072 0 0100 760 100 760 0 0 25751 0 01654buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1655buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1656buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1657buildbot # Dload Upload Total Spent Left Speed1658buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 65958 0 0100 937 100 937 0 0 54760 0 0100 937 100 937 0 0 46260 0 01659buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1660buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1661buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1662buildbot # Dload Upload Total Spent Left Speed1663buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 142.7k 0 0100 1735 100 1735 0 0 118.1k 0 0100 1735 100 1735 0 0 101.2k 0 01664buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1665buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1666buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1667buildbot # Dload Upload Total Spent Left Speed1668buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 51584 0 0100 760 100 760 0 0 38553 0 0100 760 100 760 0 0 31570 0 01669buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1670buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1671buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1672buildbot # Dload Upload Total Spent Left Speed1673buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 65749 0 0100 937 100 937 0 0 53253 0 0100 937 100 937 0 0 45872 0 01674buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1675buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1676buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1677buildbot # Dload Upload Total Spent Left Speed1678buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 122.1k 0 0100 1735 100 1735 0 0 104.0k 0 0100 1735 100 1735 0 0 91566 0 01679buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1680buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1681buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1682buildbot # Dload Upload Total Spent Left Speed1683buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 30213 0 0100 760 100 760 0 0 25699 0 0100 760 100 760 0 0 22558 0 01684buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1685buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1686buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1687buildbot # Dload Upload Total Spent Left Speed1688buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 60064 0 0100 937 100 937 0 0 50525 0 0100 937 100 937 0 0 43805 0 01689buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1690buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1691buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1692buildbot # Dload Upload Total Spent Left Speed1693buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 146.4k 0 0100 1735 100 1735 0 0 118.1k 0 0100 1735 100 1735 0 0 101.5k 0 01694buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1695buildbot # [ 56.404638] twistd[1069]: 2026-08-23T03:05:40+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 9.1270681696buildbot # [ 56.426195] twistd[1069]: 2026-08-23T03:05:40+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa361fb8a0>1697buildbot # [ 56.434061] twistd[1068]: 2026-08-23T03:05:40+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01698buildbot # [ 56.497206] twistd[1068]: 2026-08-23T03:05:40+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xeb8ebc420910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xeb8ebc425010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xeb8ebc425010>)]1699buildbot # [ 56.524071] twistd[1068]: 2026-08-23T03:05:40+0000 [-] step 'Evaluate flake' complete: success (None)1700buildbot # [ 56.573496] twistd[1068]: 2026-08-23T03:05:40+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1701buildbot # [ 56.590184] twistd[1068]: 2026-08-23T03:05:40+0000 [-] step 'build flake' complete: success (None)1702buildbot # [ 56.614466] twistd[1068]: 2026-08-23T03:05:40+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc457270>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc457320>)): []1703buildbot # [ 56.628491] twistd[1068]: 2026-08-23T03:05:40+0000 [-] step 'Process skipped builds' complete: skipped (None)1704buildbot # [ 56.631018] gitea[749]: 2026/08/23 03:05:40 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/de980b2f0a21577428efbb066b03a139d2e75b20 for [::1]:51146, 201 Created in 92.3ms @ repo/status.go:21(repo.NewCommitStatus)1705buildbot # [ 56.656119] twistd[1068]: 2026-08-23T03:05:40+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [9]1706buildbot # [ 56.669105] twistd[1068]: 2026-08-23T03:05:40+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'1707buildbot # [ 56.675428] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command 9): startCommand:shell1708buildbot # [ 56.681545] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1709buildbot # [ 56.687943] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/1710buildbot # [ 56.691712] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1711buildbot # [ 56.695641] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}1712buildbot # [ 56.701662] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']1713buildbot # [ 56.705668] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False1714buildbot # [ 56.715084] twistd[1069]: 2026-08-23T03:05:40+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0526431715buildbot # [ 56.725005] twistd[1069]: 2026-08-23T03:05:40+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa361fbce0>1716buildbot # [ 56.728799] twistd[1068]: 2026-08-23T03:05:40+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=01717buildbot # [ 56.765997] gitea[749]: 2026/08/23 03:05:40 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/de980b2f0a21577428efbb066b03a139d2e75b20 for [::1]:51146, 201 Created in 85.8ms @ repo/status.go:21(repo.NewCommitStatus)1718buildbot # [ 56.774759] twistd[1068]: 2026-08-23T03:05:40+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1719buildbot # [ 56.788923] twistd[1068]: 2026-08-23T03:05:40+0000 [-] step 'Cleanup drv paths' complete: success (None)1720buildbot # [ 56.817641] twistd[1068]: 2026-08-23T03:05:40+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [10]1721buildbot # [ 56.821916] twistd[1068]: 2026-08-23T03:05:40+0000 [-] command '['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'1722buildbot # [ 56.828188] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command 10): startCommand:shell1723buildbot # [ 56.829382] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand1724buildbot # [ 56.834856] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev de980b2f0a21577428efbb066b03a139d2e75b20 --branch master --repo gitea-admin/test-flake1725buildbot # [ 56.839296] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1726buildbot # [ 56.843947] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}1727buildbot # [ 56.847087] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'de980b2f0a21577428efbb066b03a139d2e75b20', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']1728buildbot # [ 56.857798] twistd[1069]: 2026-08-23T03:05:40+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False1729buildbot # [ 56.910107] gitea[749]: 2026/08/23 03:05:40 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/de980b2f0a21577428efbb066b03a139d2e75b20 for [::1]:51146, 201 Created in 103.2ms @ repo/status.go:21(repo.NewCommitStatus)1730buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1731buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1732buildbot # Dload Upload Total Spent Left Speed1733buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 23601 0 0100 760 100 760 0 0 21927 0 0100 760 100 760 0 0 18477 0 01734buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1735buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1736buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1737buildbot # [ 57.262148] nix-daemon[1342]: accepted connection from pid 1442, user buildbot-worker1738buildbot # Dload Upload Total Spent Left Speed1739buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 33626 0 0100 937 100 937 0 0 27994 0 0100 937 100 937 0 0 20898 0 01740buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1741buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1742buildbot # [ 57.337922] twistd[1069]: 2026-08-23T03:05:40+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5213851743buildbot # [ 57.344624] twistd[1069]: 2026-08-23T03:05:40+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa360ab950>1744buildbot # [ 57.350952] twistd[1068]: 2026-08-23T03:05:40+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=01745buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1746buildbot # Dload Upload Total Spent Left Speed1747buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 98.91k 0 0100 1735 100 1735 0 0 85400 0 0100 1735 100 1735 0 0 67110 0 01748buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.11 seconds)1749buildbot # [ 57.423061] twistd[1068]: 2026-08-23T03:05:41+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc541590>, logEnviron=False)): []1750buildbot # [ 57.435384] twistd[1068]: 2026-08-23T03:05:41+0000 [-] step 'Evaluate effects' complete: success (None)1751buildbot # [ 57.481973] twistd[1068]: 2026-08-23T03:05:41+0000 [-] added buildset 3 to database1752buildbot # [ 57.525051] gitea[749]: 2026/08/23 03:05:41 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/de980b2f0a21577428efbb066b03a139d2e75b20 for [::1]:51146, 201 Created in 47.5ms @ repo/status.go:21(repo.NewCommitStatus)1753buildbot # [ 57.618354] twistd[1068]: 2026-08-23T03:05:41+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>1754buildbot # [ 57.624728] twistd[1068]: 2026-08-23T03:05:41+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild1755buildbot # [ 57.704318] twistd[1068]: 2026-08-23T03:05:41+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1756buildbot # [ 57.709386] twistd[1068]: 2026-08-23T03:05:41+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>1757buildbot # [ 57.713558] twistd[1068]: 2026-08-23T03:05:41+0000 [-] sending ping1758buildbot # [ 57.716174] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] message from master: ping1759buildbot # [ 57.717337] twistd[1068]: 2026-08-23T03:05:41+0000 [Broker,0,127.0.0.1] ping finished: success1760buildbot # [ 57.736063] twistd[1068]: 2026-08-23T03:05:41+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [11]1761buildbot # [ 57.737576] twistd[1068]: 2026-08-23T03:05:41+0000 [-] command '['git', '--version']' in dir 'build'1762buildbot # [ 57.744303] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 11): startCommand:shell1763buildbot # [ 57.745640] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1764buildbot # [ 57.747058] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): git --version1765buildbot # [ 57.752141] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1766buildbot # [ 57.754367] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1767buildbot # [ 57.755727] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1768buildbot # [ 57.759510] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): environment:1769buildbot # [ 57.761334] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1770buildbot # [ 57.764676] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1771buildbot # [ 57.765869] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',1772buildbot # [ 57.766701] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',1773buildbot # [ 57.767718] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1774buildbot # [ 57.769276] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1775buildbot # [ 57.770387] twistd[1069]: 'JOURNAL_STREAM': '9:12702',1776buildbot # [ 57.771418] twistd[1069]: 'LANG': 'en_US.UTF-8',1777buildbot # [ 57.772373] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',1778buildbot # [ 57.774246] twistd[1069]: 'LOGNAME': 'buildbot-worker',1779buildbot # [ 57.775080] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1780buildbot # [ 57.776075] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1781buildbot # [ 57.777754] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1782buildbot # [ 57.778917] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',1783buildbot # [ 57.802874] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1784buildbot # [ 57.804607] twistd[1069]: 'PYTHONNOUSERSITE': 'true',1785buildbot # [ 57.806175] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',1786buildbot # [ 57.809019] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',1787buildbot # [ 57.810007] twistd[1069]: 'SHLVL': '0',1788buildbot # [ 57.810626] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',1789buildbot # [ 57.811397] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',1790buildbot # [ 57.812887] twistd[1069]: 'USER': 'buildbot-worker',1791buildbot # [ 57.813655] twistd[1069]: 'WORKER_COUNT': '0',1792buildbot # [ 57.814356] twistd[1069]: 'WORKER_NAME': 'local-worker',1793buildbot # [ 57.815104] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1794buildbot # [ 57.822002] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', '--version']): using PTY: False1795buildbot # [ 57.825085] twistd[1069]: 2026-08-23T03:05:41+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0747071796buildbot # [ 57.827963] twistd[1069]: 2026-08-23T03:05:41+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa360abb50>1797buildbot # [ 57.832925] twistd[1068]: 2026-08-23T03:05:41+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01798buildbot # [ 57.846118] twistd[1068]: 2026-08-23T03:05:41+0000 [-] <RemoteCommand 'stat' at 258998275756816>: RemoteCommand.run [12]1799buildbot # [ 57.861768] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 12): startCommand:stat1800buildbot # [ 57.863006] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 12): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'1801buildbot # [ 57.869405] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf6aa3610ad50>1802buildbot # [ 57.872940] twistd[1068]: 2026-08-23T03:05:41+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 258998275756816> rc=21803buildbot # [ 57.880372] twistd[1068]: 2026-08-23T03:05:41+0000 [-] <RemoteCommand 'listdir' at 258998275752656>: RemoteCommand.run [13]1804buildbot # [ 57.909320] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 13): startCommand:listdir1805buildbot # [ 57.911074] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xf6aa3610aad0>1806buildbot # [ 57.917024] twistd[1068]: 2026-08-23T03:05:41+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 258998275752656> rc=01807buildbot # [ 57.921332] twistd[1068]: 2026-08-23T03:05:41+0000 [-] No git repo present, making full clone1808buildbot # [ 57.924282] twistd[1068]: 2026-08-23T03:05:41+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [14]1809buildbot # [ 57.927360] twistd[1068]: 2026-08-23T03:05:41+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'1810buildbot # [ 57.957203] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 14): startCommand:shell1811buildbot # [ 57.962969] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand1812buildbot # [ 57.970503] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake . --progress1813buildbot # [ 57.979209] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1814buildbot # [ 57.984717] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}1815buildbot # [ 57.988401] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']1816buildbot # [ 57.997831] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): environment:1817buildbot # [ 58.001876] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1818buildbot # [ 58.003156] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1819buildbot # [ 58.005142] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',1820buildbot # [ 58.006240] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',1821buildbot # [ 58.007813] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1822buildbot # [ 58.009830] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1823buildbot # [ 58.011465] twistd[1069]: 'JOURNAL_STREAM': '9:12702',1824buildbot # [ 58.013038] twistd[1069]: 'LANG': 'en_US.UTF-8',1825buildbot # [ 58.014917] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',1826buildbot # [ 58.017174] twistd[1069]: 'LOGNAME': 'buildbot-worker',1827buildbot # [ 58.018507] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1828buildbot # [ 58.019800] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1829buildbot # [ 58.022598] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1830buildbot # [ 58.023934] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',1831buildbot # [ 58.049770] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1832buildbot # [ 58.051221] twistd[1069]: 'PYTHONNOUSERSITE': 'true',1833buildbot # [ 58.052063] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',1834buildbot # [ 58.053863] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',1835buildbot # [ 58.054878] twistd[1069]: 'SHLVL': '0',1836buildbot # [ 58.055604] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',1837buildbot # [ 58.056520] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',1838buildbot # [ 58.058031] twistd[1069]: 'USER': 'buildbot-worker',1839buildbot # [ 58.058861] twistd[1069]: 'WORKER_COUNT': '0',1840buildbot # [ 58.059629] twistd[1069]: 'WORKER_NAME': 'local-worker',1841buildbot # [ 58.060800] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1842buildbot # [ 58.062235] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False1843buildbot # [ 58.117530] gitea[749]: 2026/08/23 03:05:41 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:36210, 200 OK in 8.3ms @ repo/githttp.go:455(repo.GetInfoRefs)1844buildbot # [ 58.129332] gitea[749]: 2026/08/23 03:05:41 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:36210, 200 OK in 7.9ms @ repo/githttp.go:433(repo.ServiceUploadPack)1845buildbot # [ 58.151921] gitea[749]: 2026/08/23 03:05:41 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:36210, 200 OK in 15.8ms @ repo/githttp.go:433(repo.ServiceUploadPack)1846buildbot # [ 58.185024] twistd[1069]: 2026-08-23T03:05:41+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.2240041847buildbot # [ 58.194745] twistd[1069]: 2026-08-23T03:05:41+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa360b3f20>1848buildbot # [ 58.197665] twistd[1068]: 2026-08-23T03:05:41+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=01849buildbot # [ 58.217877] twistd[1068]: 2026-08-23T03:05:41+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']'>: RemoteCommand.run [15]1850buildbot # [ 58.219884] twistd[1068]: 2026-08-23T03:05:41+0000 [-] command '['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']' in dir 'build'1851buildbot # [ 58.233060] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command 15): startCommand:shell1852buildbot # [ 58.237935] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): RunProcess._startCommand1853buildbot # [ 58.239945] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): git checkout -f de980b2f0a21577428efbb066b03a139d2e75b201854buildbot # [ 58.246177] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1855buildbot # [ 58.251053] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): watching logfiles {}1856buildbot # [ 58.253668] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): argv: [b'git', b'checkout', b'-f', b'de980b2f0a21577428efbb066b03a139d2e75b20']1857buildbot # [ 58.256880] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): environment:1858buildbot # [ 58.261648] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1859buildbot # [ 58.262676] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1860buildbot # [ 58.263836] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',1861buildbot # [ 58.264873] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',1862buildbot # [ 58.265964] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1863buildbot # [ 58.267655] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1864buildbot # [ 58.268939] twistd[1069]: 'JOURNAL_STREAM': '9:12702',1865buildbot # [ 58.269990] twistd[1069]: 'LANG': 'en_US.UTF-8',1866buildbot # [ 58.270772] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',1867buildbot # [ 58.272621] twistd[1069]: 'LOGNAME': 'buildbot-worker',1868buildbot # [ 58.273563] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1869buildbot # [ 58.274589] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1870buildbot # [ 58.276214] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1871buildbot # [ 58.277508] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',1872buildbot # [ 58.302516] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1873buildbot # [ 58.304844] twistd[1069]: 'PYTHONNOUSERSITE': 'true',1874buildbot # [ 58.305679] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',1875buildbot # [ 58.308663] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',1876buildbot # [ 58.309668] twistd[1069]: 'SHLVL': '0',1877buildbot # [ 58.310482] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',1878buildbot # [ 58.312080] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',1879buildbot # [ 58.313744] twistd[1069]: 'USER': 'buildbot-worker',1880buildbot # [ 58.314670] twistd[1069]: 'WORKER_COUNT': '0',1881buildbot # [ 58.315434] twistd[1069]: 'WORKER_NAME': 'local-worker',1882buildbot # [ 58.316430] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1883buildbot # [ 58.317891] twistd[1069]: 2026-08-23T03:05:41+0000 [Broker,client] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): using PTY: False1884buildbot # [ 58.327538] twistd[1069]: 2026-08-23T03:05:41+0000 [-] (command ['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']): command finished with signal None, exit code 0, elapsedTime: 0.0881311885buildbot # [ 58.332198] twistd[1069]: 2026-08-23T03:05:41+0000 [-] (command 15): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35aac230>1886buildbot # [ 58.334443] twistd[1068]: 2026-08-23T03:05:41+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', 'de980b2f0a21577428efbb066b03a139d2e75b20']'> rc=01887buildbot # [ 58.357057] twistd[1068]: 2026-08-23T03:05:42+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [16]1888buildbot # [ 58.358910] twistd[1068]: 2026-08-23T03:05:42+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1889buildbot # [ 58.372472] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command 16): startCommand:shell1890buildbot # [ 58.373739] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1891buildbot # [ 58.375529] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive1892buildbot # [ 58.382078] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1893buildbot # [ 58.386260] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1894buildbot # [ 58.388281] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']1895buildbot # [ 58.390821] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): environment:1896buildbot # [ 58.392757] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1897buildbot # [ 58.396404] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1898buildbot # [ 58.397605] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',1899buildbot # [ 58.398406] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',1900buildbot # [ 58.399396] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1901buildbot # [ 58.401028] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1902buildbot # [ 58.402128] twistd[1069]: 'JOURNAL_STREAM': '9:12702',1903buildbot # [ 58.403180] twistd[1069]: 'LANG': 'en_US.UTF-8',1904buildbot # [ 58.403976] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',1905buildbot # [ 58.405743] twistd[1069]: 'LOGNAME': 'buildbot-worker',1906buildbot # [ 58.406787] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1907buildbot # [ 58.407817] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1908buildbot # [ 58.409593] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1909buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1910buildbot # [ 58.410955] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',1911buildbot # [ 58.434810] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1912buildbot # [ 58.437756] twistd[1069]: 'PYTHONNOUSERSITE': 'true',1913buildbot # [ 58.439644] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',1914buildbot # [ 58.441945] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',1915buildbot # [ 58.443105] twistd[1069]: 'SHLVL': '0',1916buildbot # [ 58.448251] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',1917buildbot # [ 58.453515] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',1918buildbot # [ 58.455565] twistd[1069]: 'USER': 'buildbot-worker',1919buildbot # [ 58.460742] twistd[1069]: 'WORKER_COUNT': '0',1920buildbot # [ 58.462139] twistd[1069]: 'WORKER_NAME': 'local-worker',1921buildbot # [ 58.467508] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1922buildbot # [ 58.471664] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False1923buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1924buildbot # Dload Upload Total Spent Left Speed1925buildbot # 0 0 0 0 0 0 0 0 0100 1110 100 1110 0 0 46792 0 0100 1110 100 1110 0 0 38981 0 0100 1110 100 1110 0 0 34700 0 01926buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1927buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1928buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1929buildbot # Dload Upload Total Spent Left Speed1930buildbot # [ 58.629991] twistd[1069]: 2026-08-23T03:05:42+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.2582001931buildbot # 0 0 0 0 0 0 0 0 0[ 58.638394] twistd[1069]: 2026-08-23T03:05:42+0000 [-] (command 16): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a79710>1932buildbot # [ 58.643999] twistd[1068]: 2026-08-23T03:05:42+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=01933buildbot # 100 937 100 937 0 0 31179 0 0100 937 100 937 0 0 26687 0 0100 937 100 937 0 0 23030 0 01934buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1935buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1936buildbot # [ 58.683434] twistd[1068]: 2026-08-23T03:05:42+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [17]1937buildbot # [ 58.690596] twistd[1068]: 2026-08-23T03:05:42+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1938buildbot # [ 58.691945] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command 17): startCommand:shell1939buildbot # [ 58.697366] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1940buildbot # [ 58.706019] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1941buildbot # [ 58.707663] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1942buildbot # [ 58.714658] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1943buildbot # [ 58.720500] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1944buildbot # [ 58.722269] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:1945buildbot # [ 58.723714] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1946buildbot # [ 58.725800] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1947buildbot # [ 58.727435] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',1948buildbot # [ 58.728825] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',1949buildbot # [ 58.730015] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1950buildbot # [ 58.734162] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1951buildbot # [ 58.740729] twistd[1069]: 'JOURNAL_STREAM': '9:12702',1952buildbot # [ 58.741734] twistd[1069]: 'LANG': 'en_US.UTF-8',1953buildbot # [ 58.742871] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',1954buildbot # [ 58.746806] twistd[1069]: 'LOGNAME': 'buildbot-worker',1955buildbot # [ 58.747768] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1956buildbot # [ 58.754859] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1957buildbot # [ 58.758547] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1958buildbot # [ 58.762750] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',1959buildbot # [ 58.801202] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1960buildbot # [ 58.804698] twistd[1069]: 'PYTHONNOUSERSITE': 'true',1961buildbot # [ 58.818135] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',1962buildbot # [ 58.822315] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',1963buildbot # [ 58.823359] twistd[1069]: 'SHLVL': '0',1964buildbot # [ 58.823935] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',1965buildbot # % Total % Received % Xferd Average Speed Time Ti[ 58.828964] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',1966buildbot # [ 58.830329] twistd[1069]: 'USER': 'buildbot-worker',1967buildbot # [ 58.831039] twistd[1069]: 'WORKER_COUNT': '0',1968buildbot # [ 58.831703] twistd[1069]: 'WORKER_NAME': 'local-worker',1969buildbot # me Time Current1970buildbot # Dload Upload Total Spent Left Speed1971buildbot # 0 0 0 0 0 0 [ 58.840207] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1972buildbot # 0 0 0[ 58.844138] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1973buildbot # [ 58.845699] twistd[1069]: 2026-08-23T03:05:42+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0488131974buildbot # [ 58.847550] twistd[1069]: 2026-08-23T03:05:42+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a799b0>1975buildbot # [ 58.855450] twistd[1068]: 2026-08-23T03:05:42+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01976buildbot # 100 1735 100 1735 0 0 45835 0 0100 1735 100 1735 0 0 42946 0 [ 58.859491] twistd[1068]: 2026-08-23T03:05:42+0000 [-] Got Git revision de980b2f0a21577428efbb066b03a139d2e75b201977buildbot # 0100 1735 100 1735 0 0 36170 0 01978buildbot # [ 58.884166] twistd[1068]: 2026-08-23T03:05:42+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []1979buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.22 seconds)1980buildbot # [ 58.902825] twistd[1068]: 2026-08-23T03:05:42+0000 [-] step 'git' complete: success (None)1981buildbot # [ 58.920263] twistd[1068]: 2026-08-23T03:05:42+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [18]1982buildbot # [ 58.923182] twistd[1068]: 2026-08-23T03:05:42+0000 [-] command '['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'1983buildbot # [ 58.932154] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command 18): startCommand:shell1984buildbot # [ 58.933409] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand1985buildbot # [ 58.940135] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev de980b2f0a21577428efbb066b03a139d2e75b20 --branch master --repo gitea-admin/test-flake test-effect1986buildbot # [ 58.944382] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1987buildbot # [ 58.948471] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}1988buildbot # [ 58.951494] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'de980b2f0a21577428efbb066b03a139d2e75b20', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake', b'test-effect']1989buildbot # [ 58.956539] twistd[1069]: 2026-08-23T03:05:42+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False1990buildbot # [ 59.274387] nix-daemon[1342]: accepted connection from pid 1509, user buildbot-worker1991buildbot # [ 59.329695] twistd[1069]: 2026-08-23T03:05:42+0000 [-] (command ['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.4024391992buildbot # [ 59.338046] twistd[1069]: 2026-08-23T03:05:42+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa360e24e0>1993buildbot # [ 59.341489] twistd[1068]: 2026-08-23T03:05:42+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=11994buildbot # [ 59.370971] twistd[1068]: 2026-08-23T03:05:43+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []1995buildbot # [ 59.381428] twistd[1068]: 2026-08-23T03:05:43+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])1996buildbot # [ 59.384957] twistd[1068]: 2026-08-23T03:05:43+0000 [-] <Build gitea-admin/test-flake/run-effect number:1 results:failure>: build finished1997buildbot # [ 59.395604] twistd[1068]: 2026-08-23T03:05:43+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1998buildbot # [ 59.574418] twistd[1068]: 2026-08-23T03:05:43+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []1999buildbot # [ 59.590149] twistd[1068]: 2026-08-23T03:05:43+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])2000buildbot # [ 59.618110] twistd[1068]: 2026-08-23T03:05:43+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [19]2001buildbot # [ 59.627129] twistd[1068]: 2026-08-23T03:05:43+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'2002buildbot # [ 59.636252] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command 19): startCommand:shell2003buildbot # [ 59.637452] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2004buildbot # [ 59.643972] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list-schedules --rev de980b2f0a21577428efbb066b03a139d2e75b20 --branch master --repo gitea-admin/test-flake2005buildbot # [ 59.648836] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2006buildbot # [ 59.654798] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2007buildbot # [ 59.660965] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'de980b2f0a21577428efbb066b03a139d2e75b20', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']2008buildbot # [ 59.665984] twistd[1069]: 2026-08-23T03:05:43+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False2009buildbot # [ 59.705114] gitea[749]: 2026/08/23 03:05:43 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/de980b2f0a21577428efbb066b03a139d2e75b20 for [::1]:51146, 201 Created in 99.5ms @ repo/status.go:21(repo.NewCommitStatus)2010buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2011buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2012buildbot # Dload Upload Total Spent Left Speed2013buildbot # 0 0 0 0 0 0 0 0 0100 1186 100 1186 0 0 36705 0 0100 1186 100 1186 0 0 34066 0 0100 1186 100 1186 0 0 31882 0 02014buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2015buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2016buildbot # [ 60.038468] nix-daemon[1342]: accepted connection from pid 1525, user buildbot-worker2017buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2018buildbot # Dload Upload Total Spent Left Speed2019buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 42371 0 0100 937 100 937 0 0 38165 0 0100 937 100 937 0 0 34343 0 02020buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)2021buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2022buildbot # [ 60.109501] twistd[1069]: 2026-08-23T03:05:43+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4845572023buildbot # [ 60.120263] twistd[1069]: 2026-08-23T03:05:43+0000 [-] (command 19): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a44e90>2024buildbot # [ 60.128914] twistd[1068]: 2026-08-23T03:05:43+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'de980b2f0a21577428efbb066b03a139d2e75b20', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=02025buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2026buildbot # Dload Upload Total Spent Left Speed2027buildbot # 0 0 0 [ 60.190708] twistd[1068]: 2026-08-23T03:05:43+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc58b530>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc588670>, logEnviron=False)): []2028buildbot # 0 0 0 0 0 0100 2095 100 2095 0 0 75473 0 0100 2095 100 2095 0 0 69292 0 0100 2095 100 2095 0 0 57165 0 0[ 60.216931] twistd[1068]: 2026-08-23T03:05:43+0000 [-] step 'Evaluate scheduled effects' complete: success (None)2029buildbot # [ 60.218299] twistd[1068]: 2026-08-23T03:05:43+0000 [-] <Build gitea-admin/test-flake/nix-eval number:1 results:failure>: build finished2030buildbot # 2031buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2032buildbot # [ 60.230114] twistd[1068]: 2026-08-23T03:05:43+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2033buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2034buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2035buildbot # Dload Upload Total Spent Left Speed2036buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 32956 0 0100 1735 100 1735 0 0 31508 0 0100 1735 100 1735 0 0 27282 0 02037buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.21 seconds)2038buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2039buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2040buildbot # Dload Upload Total Spent Left Speed2041buildbot # 0 0 0 0 0 0 0 0 0100 1195 100 1195 0 0 83217 0 0100 1195 100 1195 0 0 63543 0 0100 1195 100 1195 0 0 53144 0 02042buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2043buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2044buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2045buildbot # Dload Upload Total Spent Left Speed2046buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 50392 0 0100 937 100 937 0 0 43333 0 0100 937 100 937 0 0 37685 0 02047buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)2048buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2049buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2050buildbot # Dload Upload Total Spent Left Speed2051buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 133.0k 0 0100 2095 100 2095 0 0 115.0k 0 0100 2095 100 2095 0 0 99.97k 0 02052buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2053buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2054buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2055buildbot # Dload Upload Total Spent Left Speed2056buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 147.5k 0 0100 1735 100 1735 0 0 119.0k 0 0100 1735 100 1735 0 0 102.1k 0 02057buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2058buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2059buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2060buildbot # Dload Upload Total Spent Left Speed2061buildbot # 0 0 0 0 0 0 0 0 0100 3497 100 3497 0 0 248.6k 0 0100 3497 100 3497 0 0 206.9k 0 0100 3497 100 3497 0 0 180.7k 0 02062buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.06 seconds)2063buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2064buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2065buildbot # Dload Upload Total Spent Left Speed2066buildbot # 0 0 0 0 0 0 0 0 0100 3497 100 3497 0 0 270.8k 0 0100 3497 100 3497 0 0 227.7k 0 0100 3497 100 3497 0 0 193.9k 0 02067buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.06 seconds)2068(finished: subtest: Webhook triggers nix-eval build, in 23.22 seconds)2069subtest: PR with effects_on_pull_requests runs effects2070buildbot: must succeed: 2071 cd /tmp/test-flake2072 git checkout -b test-pr-effects2073 echo '# PR change' >> flake.nix2074 git add flake.nix2075 git commit -m 'PR to test effects on pull requests'2076 git push origin test-pr-effects2077 2078buildbot # Switched to a new branch 'test-pr-effects'2079buildbot # [ 61.962188] gitea[749]: 2026/08/23 03:05:45 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:51122, 401 Unauthorized in 1.7ms @ repo/githttp.go:455(repo.GetInfoRefs)2080buildbot # [ 61.992922] gitea[749]: 2026/08/23 03:05:45 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:51122, 200 OK in 27.2ms @ repo/githttp.go:455(repo.GetInfoRefs)2081buildbot # Enumerating objects: 5, done.2082buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.2083buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.2084buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 341 bytes | 341.00 KiB/s, done.2085buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)2086buildbot # [ 62.244368] gitea[749]: 2026/08/23 03:05:45 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 2.3ms @ private/hook_pre_receive.go:110(private.HookPreReceive)2087buildbot # [ 62.556393] gitea[749]: 2026/08/23 03:05:46 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 19.1ms @ private/hook_post_receive.go:101(private.HookPostReceive)2088buildbot # remote:2089buildbot # remote: Create a new pull request for 'test-pr-effects':2090buildbot # remote: http://localhost:3742/gitea-admin/test-flake/pulls/new/test-pr-effects2091buildbot # remote:2092buildbot # [ 62.576565] gitea[749]: 2026/08/23 03:05:46 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:51122, 200 OK in 557.5ms @ repo/githttp.go:438(repo.ServiceReceivePack)2093buildbot # To http://localhost:3742/gitea-admin/test-flake.git2094buildbot # * [new branch] test-pr-effects -> test-pr-effects2095buildbot: (finished: must succeed: 2096 cd /tmp/test-flake2097 git checkout -b test-pr-effects2098 echo '# PR change' >> flake.nix2099 git add flake.nix2100 git commit -m 'PR to test effects on pull requests'2101 git push origin test-pr-effects2102 , in 0.72 seconds)2103buildbot: must succeed: 2104 TOKEN=$(cat /tmp/gitea-token)2105 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2106 2107buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2108buildbot # Dload Upload Total Spent Left Speed2109buildbot # 0 0 0 0 0 0 0 0 0100 6455 0 6387 100 68 8892 94 0100 6455 0 6387 100 68 8861 94 [ 63.365234] gitea[749]: 2026/08/23 03:05:47 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/pulls for [::1]:51140, 201 Created in 710.2ms @ repo/pull.go:371(repo.CreatePullRequest)2110buildbot # 0100 6455 0 6387 100 68 8777 93 02111buildbot: (finished: must succeed: 2112 TOKEN=$(cat /tmp/gitea-token)2113 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2114 , in 0.79 seconds)2115buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2116buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2117buildbot # Dload Upload Total Spent Left Speed2118buildbot # 0 0 0 0 0 0 0 0 0100 1195 100 1195 0 0 52153 0 0100 1195 100 1195 0 0 40308 0 0100 1195 100 1195 0 0 37327 0 02119buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2120buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2121buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2122buildbot # Dload Upload Total Spent Left Speed2123buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 68409 0 0100 937 100 937 0 0 58263 0 0100 937 100 937 0 0 50008 0 02124buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2125buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2126buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2127buildbot # Dload Upload Total Spent Left Speed2128buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 184.3k 0 0100 2095 100 2095 0 0 151.3k 0 0100 2095 100 2095 0 0 119.2k 0 02129buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2130buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2131buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2132buildbot # Dload Upload Total Spent Left Speed2133buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 147.2k 0 0100 1735 100 1735 0 0 121.8k 0 0100 1735 100 1735 0 0 104.0k 0 02134buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2135buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2136buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2137buildbot # Dload Upload Total Spent Left Speed2138buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 153.6k 0 0100 1735 100 1735 0 0 125.6k 0 0100 1735 100 1735 0 0 106.9k 0 02139buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2140buildbot # [ 63.940949] twistd[1068]: 2026-08-23T03:05:47+0000 [_GenericHTTPChannelProtocol,64,127.0.0.1] Received event 'pull_request' from gitea2141buildbot # [ 63.985902] twistd[1068]: 2026-08-23T03:05:47+0000 [-] added change with revision bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a to database2142buildbot # [ 63.995748] twistd[1068]: 2026-08-23T03:05:47+0000 [-] injected change 22143buildbot # [ 64.023358] twistd[1068]: 2026-08-23T03:05:47+0000 [_GenericHTTPChannelProtocol,65,127.0.0.1] Received event 'push' from gitea2144buildbot # [ 64.045958] twistd[1068]: 2026-08-23T03:05:47+0000 [-] added buildset 4 to database2145buildbot # [ 64.059369] twistd[1068]: 2026-08-23T03:05:47+0000 [-] added change with revision bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a to database2146buildbot # [ 64.063841] twistd[1068]: 2026-08-23T03:05:47+0000 [-] injected change 32147buildbot # [ 64.204606] twistd[1068]: 2026-08-23T03:05:47+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>2148buildbot # [ 64.215862] twistd[1068]: 2026-08-23T03:05:47+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild2149buildbot # [ 64.318411] twistd[1068]: 2026-08-23T03:05:47+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2150buildbot # [ 64.322796] twistd[1068]: 2026-08-23T03:05:47+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>2151buildbot # [ 64.327963] twistd[1068]: 2026-08-23T03:05:47+0000 [-] sending ping2152buildbot # [ 64.330907] twistd[1068]: 2026-08-23T03:05:47+0000 [Broker,0,127.0.0.1] ping finished: success2153buildbot # [ 64.333032] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] message from master: ping2154buildbot # [ 64.354018] twistd[1068]: 2026-08-23T03:05:47+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [20]2155buildbot # [ 64.355482] twistd[1068]: 2026-08-23T03:05:47+0000 [-] command '['git', '--version']' in dir 'build'2156buildbot # [ 64.358679] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command 20): startCommand:shell2157buildbot # [ 64.359888] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2158buildbot # [ 64.365871] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command ['git', '--version']): git --version2159buildbot # [ 64.367212] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2160buildbot # [ 64.374712] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2161buildbot # [ 64.376570] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2162buildbot # [ 64.380403] twistd[1069]: 2026-08-23T03:05:47+0000 [Broker,client] (command ['git', '--version']): using PTY: False2163buildbot # [ 64.389005] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0365072164buildbot # [ 64.390793] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command 20): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a450d0>2165buildbot # [ 64.413992] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02166buildbot # [ 64.435118] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteCommand 'stat' at 258998275759056>: RemoteCommand.run [21]2167buildbot # [ 64.457933] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 21): startCommand:stat2168buildbot # [ 64.459307] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 21): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf6aa3610ae90>2169buildbot # [ 64.464717] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 258998275759056> rc=02170buildbot # [ 64.468726] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteCommand 'stat' at 258998275759696>: RemoteCommand.run [22]2171buildbot # [ 64.505391] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 22): startCommand:stat2172buildbot # [ 64.507098] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 22): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'2173buildbot # [ 64.517246] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 22): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf6aa36079ba0>2174buildbot # [ 64.522552] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 258998275759696> rc=22175buildbot # [ 64.532918] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']'>: RemoteCommand.run [23]2176buildbot # [ 64.541457] twistd[1068]: 2026-08-23T03:05:48+0000 [-] command '['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']' in dir 'build'2177buildbot # [ 64.557258] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 23): startCommand:shell2178buildbot # [ 64.562049] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): RunProcess._startCommand2179buildbot # [ 64.574465] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): git fetch -f -t http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake de980b2f0a21577428efbb066b03a139d2e75b20 bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a +refs/heads/master:refs/remotes/origin/master2180buildbot # [ 64.584064] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2181buildbot # [ 64.590829] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): watching logfiles {}2182buildbot # [ 64.599077] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): argv: [b'git', b'fetch', b'-f', b'-t', b'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', b'de980b2f0a21577428efbb066b03a139d2e75b20', b'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', b'+refs/heads/master:refs/remotes/origin/master']2183buildbot # [ 64.608681] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): using PTY: False2184buildbot # [ 64.660002] gitea[749]: 2026/08/23 03:05:48 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:51152, 200 OK in 8.3ms @ repo/githttp.go:455(repo.GetInfoRefs)2185buildbot # [ 64.670769] gitea[749]: 2026/08/23 03:05:48 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:51152, 200 OK in 7.5ms @ repo/githttp.go:433(repo.ServiceUploadPack)2186buildbot # [ 64.690055] gitea[749]: 2026/08/23 03:05:48 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:51152, 200 OK in 15.3ms @ repo/githttp.go:433(repo.ServiceUploadPack)2187buildbot # [ 64.720788] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command ['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']): command finished with signal None, exit code 0, elapsedTime: 0.1574662188buildbot # [ 64.728192] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command 23): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a99a70>2189buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2190buildbot # [ 64.730768] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'de980b2f0a21577428efbb066b03a139d2e75b20', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '+refs/heads/master:refs/remotes/origin/master']'> rc=02191buildbot # [ 64.761115] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']'>: RemoteCommand.run [24]2192buildbot # [ 64.767483] twistd[1068]: 2026-08-23T03:05:48+0000 [-] command '['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']' in dir 'build'2193buildbot # [ 64.771837] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 24): startCommand:shell2194buildbot # [ 64.775552] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): RunProcess._startCommand2195buildbot # [ 64.784568] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): git checkout --detach -f bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a2196buildbot # [ 64.790481] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2197buildbot # [ 64.796518] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): watching logfiles {}2198buildbot # [ 64.799262] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): argv: [b'git', b'checkout', b'--detach', b'-f', b'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']2199buildbot # [ 64.803294] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): using PTY: False2200buildbot # [ 64.821488] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command ['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): command finished with signal None, exit code 0, elapsedTime: 0.0545362201buildbot # [ 64.832142] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command 24): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a99c80>2202buildbot # [ 64.834290] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']'> rc=02203buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2204buildbot # Dload Upload Total Spent Left Speed2205buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 97579 0 0100 1544 100 1544 0 0 84723 0 0100 1544 100 1544 0 0 69899 0 02206buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)2207buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2208buildbot # [ 64.879401] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']'>: RemoteCommand.run [25]2209buildbot # [ 64.889240] twistd[1068]: 2026-08-23T03:05:48+0000 [-] command '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']' in dir 'build'2210buildbot # [ 64.898420] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 25): startCommand:shell2211buildbot # [ 64.902156] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): RunProcess._startCommand2212buildbot # [ 64.906688] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): git -c user.email=buildbot@example.com -c user.name=buildbot merge --no-ff -m 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a' de980b2f0a21577428efbb066b03a139d2e75b202213buildbot # [ 64.916821] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2214buildbot # [ 64.922567] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): watching logfiles {}2215buildbot # [ 64.927096] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): argv: [b'git', b'-c', b'user.email=buildbot@example.com', b'-c', b'user.name=buildbot', b'merge', b'--no-ff', b'-m', b'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', b'de980b2f0a21577428efbb066b03a139d2e75b20']2216buildbot # [ 64.935738] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): using PTY: False2217buildbot # [ 64.947210] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']): command finished with signal None, exit code 0, elapsedTime: 0.0611412218buildbot # [ 64.958029] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command 25): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a76490>2219buildbot # [ 64.961516] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge de980b2f0a21577428efbb066b03a139d2e75b20 into bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', 'de980b2f0a21577428efbb066b03a139d2e75b20']'> rc=02220buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2221buildbot # Dload Upload Total Spent Left Speed2222buildbot # 0 0 0 0 0 0 0 0 [ 65.011696] twistd[1068]: 2026-08-23T03:05:48+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []2223buildbot # 0100 937 100 937 0 0 36422 0 0100 937 100 937 0 0 33307 0 0100 937 100 937 0 0 26916 0 02224buildbot # [ 65.040677] twistd[1068]: 2026-08-23T03:05:48+0000 [-] step 'git' complete: success (None)2225buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.17 seconds)2226buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2227buildbot # [ 65.051650] twistd[1068]: 2026-08-23T03:05:48+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xeb8ebc420910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xeb8ebc425010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xeb8ebc425010>)])2228buildbot # [ 65.080076] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [26]2229buildbot # [ 65.092145] twistd[1068]: 2026-08-23T03:05:48+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'2230buildbot # [ 65.093927] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 26): startCommand:shell2231buildbot # [ 65.095094] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand2232buildbot # [ 65.106242] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'2233buildbot # [ 65.118075] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2234buildbot # [ 65.128337] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}2235buildbot # [ 65.134646] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']2236buildbot # [ 65.146716] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False2237buildbot # [ 65.166146] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0793542238buildbot # % Total % Received % Xferd Average Speed Time Tim[ 65.176606] twistd[1069]: 2026-08-23T03:05:48+0000 [-] (command 26): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35a76b70>2239buildbot # e Time Current2240buildbot # Dload Upload Total Spent Left Speed2241buildbot # 0 0 0 0 0 [ 65.185516] twistd[1068]: 2026-08-23T03:05:48+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=02242buildbot # [ 65.187472] twistd[1068]: 2026-08-23T03:05:48+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [27]2243buildbot # 0 0 0 0100 2095 100 2095 0 0 80797 [ 65.201299] twistd[1068]: 2026-08-23T03:05:48+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'2244buildbot # 0 0100 2095 100 2095 0 0 58589 0 0100 2095 100 2095 0 0 54884 0 02245buildbot # [ 65.217358] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command 27): startCommand:shell2246buildbot # [ 65.220957] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand2247buildbot # [ 65.232802] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'2248buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.21 seconds)2249buildbot # [ 65.244300] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2250buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2251buildbot # [ 65.253200] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}2252buildbot # [ 65.261188] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']2253buildbot # [ 65.271489] twistd[1069]: 2026-08-23T03:05:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False2254buildbot # [ 65.294474] gitea[749]: 2026/08/23 03:05:48 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a for [::1]:51146, 201 Created in 149.3ms @ repo/status.go:21(repo.NewCommitStatus)2255buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2256buildbot # Dload Upload Total Spent Left Speed2257buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 76756 0 0100 1735 100 1735 0 0 59675 0 0100 1735 100 1735 0 0 55128 0 02258buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2259buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2260buildbot # [ 65.412868] nix-daemon[1342]: accepted connection from pid 1765, user buildbot-worker2261buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2262buildbot # Dload Upload Total Spent Left Speed2263buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 151.8k 0 0100 1735 100 1735 0 0 114.5k 0 0100 1735 100 1735 0 0 98.71k 0 02264buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)2265buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2266buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2267buildbot # Dload Upload Total Spent Left Speed2268buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 252.8k 0 0100 2935 100 2935 0 0 208.0k 0 0100 2935 100 2935 0 0 174.5k 0 02269buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2270buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2271buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2272buildbot # Dload Upload Total Spent Left Speed2273buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 253.0k 0 0100 2935 100 2935 0 0 204.2k 0 0100 2935 100 2935 0 0 174.4k 0 02274buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2275buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2276buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2277buildbot # Dload Upload Total Spent Left Speed2278buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 112.3k 0 0100 1544 100 1544 0 0 86377 0 0100 1544 100 1544 0 0 69194 0 02279buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2280buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2281buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2282buildbot # Dload Upload Total Spent Left Speed2283buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 62688 0 0100 937 100 937 0 0 52631 0 0100 937 100 937 0 0 44946 0 02284buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2285buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2286buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2287buildbot # Dload Upload Total Spent Left Speed2288buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 179.2k 0 0100 2095 100 2095 0 0 144.7k 0 0100 2095 100 2095 0 0 123.9k 0 02289buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2290buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2291buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2292buildbot # Dload Upload Total Spent Left Speed2293buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 153.7k 0 0100 1735 100 1735 0 0 126.0k 0 0100 1735 100 1735 0 0 105.4k 0 02294buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2295buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2296buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2297buildbot # Dload Upload Total Spent Left Speed2298buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 121.6k 0 0100 1735 100 1735 0 0 103.7k 0 0100 1735 100 1735 0 0 92277 0 02299buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2300buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2301buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2302buildbot # Dload Upload Total Spent Left Speed2303buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 246.7k 0 0100 2935 100 2935 0 0 200.4k 0 0100 2935 100 2935 0 0 172.1k 0 02304buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2305buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2306buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2307buildbot # Dload Upload Total Spent Left Speed2308buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 249.7k 0 0100 2935 100 2935 0 0 201.9k 0 0100 2935 100 2935 0 0 172.9k 0 02309buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2310buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2311buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2312buildbot # Dload Upload Total Spent Left Speed2313buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 99.41k 0 0100 1544 100 1544 0 0 77443 0 0100 1544 100 1544 0 0 64483 0 02314buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2315buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2316buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2317buildbot # Dload Upload Total Spent Left Speed2318buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 58292 0 0100 937 100 937 0 0 50651 0 0100 937 100 937 0 0 44644 0 02319buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2320buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2321buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2322buildbot # Dload Upload Total Spent Left Speed2323buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 178.9k 0 0100 2095 100 2095 0 0 147.2k 0 0100 2095 100 2095 0 0 123.3k 0 02324buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2325buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2326buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2327buildbot # Dload Upload Total Spent Left Speed2328buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 149.0k 0 0100 1735 100 1735 0 0 122.2k 0 0100 1735 100 1735 0 0 104.4k 0 02329buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2330buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2331buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2332buildbot # Dload Upload Total Spent Left Speed2333buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 129.9k 0 0100 1735 100 1735 0 0 109.7k 0 0100 1735 100 1735 0 0 95893 0 02334buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2335buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2336buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2337buildbot # Dload Upload Total Spent Left Speed2338buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 249.4k 0 0100 2935 100 2935 0 0 206.3k 0 0100 2935 100 2935 0 0 173.4k 0 02339buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2340buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2341buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2342buildbot # Dload Upload Total Spent Left Speed2343buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 245.6k 0 0100 2935 100 2935 0 0 203.2k 0 0100 2935 100 2935 0 0 170.8k 0 02344buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2345buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2346buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2347buildbot # Dload Upload Total Spent Left Speed2348buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 106.2k 0 0100 1544 100 1544 0 0 82184 0 0100 1544 100 1544 0 0 67329 0 02349buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2350buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2351buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2352buildbot # Dload Upload Total Spent Left Speed2353buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 50322 0 0100 937 100 937 0 0 43621 0 0100 937 100 937 0 0 38226 0 02354buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)2355buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2356buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2357buildbot # Dload Upload Total Spent Left Speed2358buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 156.6k 0 0100 2095 100 2095 0 0 132.3k 0 0100 2095 100 2095 0 0 112.4k 0 02359buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2360buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2361buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2362buildbot # Dload Upload Total Spent Left Speed2363buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 150.2k 0 0100 1735 100 1735 0 0 123.3k 0 0100 1735 100 1735 0 0 103.2k 0 02364buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2365buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2366buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2367buildbot # Dload Upload Total Spent Left Speed2368buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 72255 0 0100 1735 100 1735 0 0 65588 0 0100 1735 100 1735 0 0 50073 0 02369buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)2370buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2371buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2372buildbot # Dload Upload Total Spent Left Speed2373buildbot # 0 0 0 0 0 0 0 0 0[ 69.993992] nix-daemon[1342]: accepted connection from pid 1844, user buildbot-worker2374buildbot # 100 2935 100 2935 0 0 115.3k 0 0100 2935 100 2935 0 0 105.1k 0 0100 2935 100 2935 0 0 87265 0 02375buildbot # [ 70.022769] nix-daemon[1342]: accepted connection from pid 1765, user buildbot-worker2376buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.10 seconds)2377buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2378buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2379buildbot # Dload Upload Total Spent Left Speed2380buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 245.4k 0 0100 2935 100 2935 0 0 199.0k 0 0100 2935 100 2935 0 0 170.7k 0 02381buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2382buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2383buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2384buildbot # Dload Upload Total Spent Left Speed2385buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 101.7k 0 0100 1544 100 1544 0 0 80145 0 0100 1544 100 1544 0 0 67273 0 02386buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2387buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2388buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2389buildbot # Dload Upload Total Spent Left Speed2390buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 61954 0 0100 937 100 937 0 0 51645 0 0100 937 100 937 0 0 44778 0 02391buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2392buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2393buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2394buildbot # Dload Upload Total Spent Left Speed2395buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 182.0k 0 0100 2095 100 2095 0 0 146.5k 0 0100 2095 100 2095 0 0 125.1k 0 02396buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2397buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2398buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2399buildbot # Dload Upload Total Spent Left Speed2400buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 135.7k 0 0100 1735 100 1735 0 0 113.7k 0 0100 1735 100 1735 0 0 99827 0 02401buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2402buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2403buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2404buildbot # Dload Upload Total Spent Left Speed2405buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 151.5k 0 0100 1735 100 1735 0 0 124.6k 0 0100 1735 100 1735 0 0 106.0k 0 02406buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2407buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2408buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2409buildbot # Dload Upload Total Spent Left Speed2410buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 253.5k 0 0100 2935 100 2935 0 0 208.6k 0 0100 2935 100 2935 0 0 174.9k 0 02411buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2412buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2413buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2414buildbot # Dload Upload Total Spent Left Speed2415buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 246.5k 0 0100 2935 100 2935 0 0 204.2k 0 0100 2935 100 2935 0 0 171.6k 0 02416buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2417buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2418buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2419buildbot # Dload Upload Total Spent Left Speed2420buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 119.7k 0 0100 1544 100 1544 0 0 89011 0 0100 1544 100 1544 0 0 72267 0 02421buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2422buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2423buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2424buildbot # Dload Upload Total Spent Left Speed2425buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 61962 0 0100 937 100 937 0 0 52093 0 0100 937 100 937 0 0 44449 0 02426buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2427buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2428buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2429buildbot # Dload Upload Total Spent Left Speed2430buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 164.4k 0 0100 2095 100 2095 0 0 136.9k 0 0100 2095 100 2095 0 0 115.3k 0 02431buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2432buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2433buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2434buildbot # Dload Upload Total Spent Left Speed2435buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 152.1k 0 0100 1735 100 1735 0 0 125.1k 0 0100 1735 100 1735 0 0 106.4k 0 02436buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2437buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2438buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2439buildbot # Dload Upload Total Spent Left Speed2440buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 152.0k 0 0100 1735 100 1735 0 0 124.9k 0 0100 1735 100 1735 0 0 106.3k 0 02441buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2442buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2443buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2444buildbot # Dload Upload Total Spent Left Speed2445buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 251.3k 0 0100 2935 100 2935 0 0 203.1k 0 0100 2935 100 2935 0 0 173.8k 0 02446buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2447buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2448buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2449buildbot # Dload Upload Total Spent Left Speed2450buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 248.6k 0 0100 2935 100 2935 0 0 202.6k 0 0100 2935 100 2935 0 0 173.5k 0 02451buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2452buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2453buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2454buildbot # Dload Upload Total Spent Left Speed2455buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 67447 0 0100 1544 100 1544 0 0 57571 0 0100 1544 100 1544 0 0 50749 0 02456buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2457buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2458buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2459buildbot # Dload Upload Total Spent Left Speed2460buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 68394 0 0100 937 100 937 0 0 56276 0 0100 937 100 937 0 0 47344 0 02461buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2462buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2463buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2464buildbot # Dload Upload Total Spent Left Speed2465buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 165.1k 0 0100 2095 100 2095 0 0 136.8k 0 0100 2095 100 2095 0 0 117.4k 0 02466buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2467buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2468buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2469buildbot # Dload Upload Total Spent Left Speed2470buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 151.4k 0 0100 1735 100 1735 0 0 124.6k 0 0100 1735 100 1735 0 0 104.2k 0 02471buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2472buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2473buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2474buildbot # Dload Upload Total Spent Left Speed2475buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 153.3k 0 0100 1735 100 1735 0 0 126.0k 0 0100 1735 100 1735 0 0 106.1k 0 02476buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2477buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2478buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2479buildbot # Dload Upload Total Spent Left Speed2480buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 250.7k 0 0100 2935 100 2935 0 0 207.2k 0 0100 2935 100 2935 0 0 176.8k 0 02481buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2482buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2483buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2484buildbot # Dload Upload Total Spent Left Speed2485buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 250.1k 0 0100 2935 100 2935 0 0 206.3k 0 0100 2935 100 2935 0 0 176.0k 0 02486buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2487buildbot # [ 74.886743] twistd[1069]: 2026-08-23T03:05:58+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 9.6628692488buildbot # [ 74.912201] twistd[1069]: 2026-08-23T03:05:58+0000 [-] (command 27): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa36106570>2489buildbot # [ 74.925509] twistd[1068]: 2026-08-23T03:05:58+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=02490buildbot # [ 74.983849] twistd[1068]: 2026-08-23T03:05:58+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xeb8ebc420910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xeb8ebc425010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xeb8ebc425010>)]2491buildbot # [ 75.014593] twistd[1068]: 2026-08-23T03:05:58+0000 [-] step 'Evaluate flake' complete: success (None)2492buildbot # [ 75.068258] twistd[1068]: 2026-08-23T03:05:58+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []2493buildbot # [ 75.089754] twistd[1068]: 2026-08-23T03:05:58+0000 [-] step 'build flake' complete: success (None)2494buildbot # [ 75.102325] gitea[749]: 2026/08/23 03:05:58 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a for [::1]:51146, 201 Created in 78.3ms @ repo/status.go:21(repo.NewCommitStatus)2495buildbot # [ 75.113676] twistd[1068]: 2026-08-23T03:05:58+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc457270>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc457320>)): []2496buildbot # [ 75.129783] twistd[1068]: 2026-08-23T03:05:58+0000 [-] step 'Process skipped builds' complete: skipped (None)2497buildbot # [ 75.158810] twistd[1068]: 2026-08-23T03:05:58+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [28]2498buildbot # [ 75.169159] twistd[1068]: 2026-08-23T03:05:58+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'2499buildbot # [ 75.176537] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command 28): startCommand:shell2500buildbot # [ 75.178724] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand2501buildbot # [ 75.182122] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/2502buildbot # [ 75.188230] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2503buildbot # [ 75.191658] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}2504buildbot # [ 75.194590] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']2505buildbot # [ 75.198549] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False2506buildbot # [ 75.207560] twistd[1069]: 2026-08-23T03:05:58+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0436922507buildbot # [ 75.211668] twistd[1069]: 2026-08-23T03:05:58+0000 [-] (command 28): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad0250>2508buildbot # [ 75.218198] twistd[1068]: 2026-08-23T03:05:58+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=02509buildbot # [ 75.239063] gitea[749]: 2026/08/23 03:05:58 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a for [::1]:51146, 201 Created in 95.0ms @ repo/status.go:21(repo.NewCommitStatus)2510buildbot # [ 75.262912] twistd[1068]: 2026-08-23T03:05:58+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []2511buildbot # [ 75.279335] twistd[1068]: 2026-08-23T03:05:58+0000 [-] step 'Cleanup drv paths' complete: success (None)2512buildbot # [ 75.300832] twistd[1068]: 2026-08-23T03:05:58+0000 [-] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'>: RemoteCommand.run [29]2513buildbot # [ 75.302986] twistd[1068]: 2026-08-23T03:05:58+0000 [-] command '['git', 'show', 'origin/master:buildbot-nix.toml']' in dir 'build'2514buildbot # [ 75.308602] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command 29): startCommand:shell2515buildbot # [ 75.309744] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): RunProcess._startCommand2516buildbot # [ 75.311431] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): git show origin/master:buildbot-nix.toml2517buildbot # [ 75.317180] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2518buildbot # [ 75.324860] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): watching logfiles {}2519buildbot # [ 75.327267] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): argv: [b'git', b'show', b'origin/master:buildbot-nix.toml']2520buildbot # [ 75.332379] twistd[1069]: 2026-08-23T03:05:58+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): using PTY: False2521buildbot # [ 75.344863] twistd[1069]: 2026-08-23T03:05:58+0000 [-] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): command finished with signal None, exit code 0, elapsedTime: 0.0371462522buildbot # [ 75.347180] twistd[1069]: 2026-08-23T03:05:58+0000 [-] (command 29): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad0650>2523buildbot # [ 75.366984] twistd[1068]: 2026-08-23T03:05:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'> rc=02524buildbot # [ 75.372147] twistd[1068]: 2026-08-23T03:05:59+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [30]2525buildbot # [ 75.376400] twistd[1068]: 2026-08-23T03:05:59+0000 [-] command '['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']' in dir 'build'2526buildbot # [ 75.382366] gitea[749]: 2026/08/23 03:05:59 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a for [::1]:51146, 201 Created in 97.5ms @ repo/status.go:21(repo.NewCommitStatus)2527buildbot # [ 75.413085] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command 30): startCommand:shell2528buildbot # [ 75.416379] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2529buildbot # [ 75.419140] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a --branch test-pr-effects --repo gitea-admin/test-flake2530buildbot # [ 75.428697] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2531buildbot # [ 75.432739] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2532buildbot # [ 75.435732] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake']2533buildbot # [ 75.443504] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): using PTY: False2534buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2535buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2536buildbot # Dload Upload Total Spent Left Speed2537buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 65106 0 0100 1544 100 1544 0 0 52987 0 0100 1544 100 1544 0 0 48868 0 02538buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2539buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2540buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2541buildbot # Dload Upload Total Spent Left Speed2542buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 46861 0 0100 937 100 937 0 0 35958 0 0100 937 100 937 0 0 29841 0 02543buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)2544buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2545buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2546buildbot # Dload Upload Total Spent Left Speed2547buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 97351 0 0100 2095 100 2095 0 0 74818 0 0100 2095 100 2095 0 0 69016 0 02548buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.09 seconds)2549buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2550buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2551buildbot # [ 75.877728] nix-daemon[1342]: accepted connection from pid 1945, user buildbot-worker2552buildbot # Dload Upload Total Spent Left Speed2553buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 61818 0 0100 1735 100 1735 0 0 56905 0 0100 1735 100 1735 0 0 46880 0 02554buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.10 seconds)2555buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2556buildbot # [ 75.944656] twistd[1069]: 2026-08-23T03:05:59+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5278792557buildbot # [ 75.953322] twistd[1069]: 2026-08-23T03:05:59+0000 [-] (command 30): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad0550>2558buildbot # [ 75.964310] twistd[1068]: 2026-08-23T03:05:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'> rc=02559buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2560buildbot # Dload Upload Total Spent Left Speed2561buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 75949 0 0100 1735 100 1735 0 0 68691 0 0100 1735 100 1735 0 0 53640 0 [ 76.031464] twistd[1068]: 2026-08-23T03:05:59+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc541590>, logEnviron=False)): []2562buildbot # 02563buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2564buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2565buildbot # [ 76.047164] twistd[1068]: 2026-08-23T03:05:59+0000 [-] step 'Evaluate effects' complete: success (None)2566buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2567buildbot # Dload Upload Total Spent Left Speed2568buildbot # 0 0 0 0 0 0 0 0 0[ 76.132014] twistd[1068]: 2026-08-23T03:05:59+0000 [-] added buildset 5 to database2569buildbot # 100 2935 100 2935 0 0 94176 0 0100 2935 100 2935 0 0 87437 0 0100 2935 100 2935 0 0 66109 0 02570buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.12 seconds)2571buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2572buildbot # [ 76.199391] gitea[749]: 2026/08/23 03:05:59 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a for [::1]:51146, 201 Created in 78.1ms @ repo/status.go:21(repo.NewCommitStatus)2573buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2574buildbot # Dload Upload Total Spent Left Speed2575buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 232.2k 0 0100 2935 100 2935 0 0 193.8k 0 0100 2935 100 2935 0 0 163.8k 0 02576buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.09 seconds)2577buildbot # [ 76.269731] twistd[1068]: 2026-08-23T03:05:59+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>2578buildbot # [ 76.275249] twistd[1068]: 2026-08-23T03:05:59+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild2579buildbot # [ 76.335475] twistd[1068]: 2026-08-23T03:05:59+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2580buildbot # [ 76.340714] twistd[1068]: 2026-08-23T03:05:59+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>2581buildbot # [ 76.343604] twistd[1068]: 2026-08-23T03:05:59+0000 [-] sending ping2582buildbot # [ 76.345740] twistd[1069]: 2026-08-23T03:05:59+0000 [Broker,client] message from master: ping2583buildbot # [ 76.349376] twistd[1068]: 2026-08-23T03:05:59+0000 [Broker,0,127.0.0.1] ping finished: success2584buildbot # [ 76.368544] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [31]2585buildbot # [ 76.372901] twistd[1068]: 2026-08-23T03:06:00+0000 [-] command '['git', '--version']' in dir 'build'2586buildbot # [ 76.378201] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 31): startCommand:shell2587buildbot # [ 76.379585] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2588buildbot # [ 76.384130] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): git --version2589buildbot # [ 76.385636] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2590buildbot # [ 76.390371] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2591buildbot # [ 76.391980] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2592buildbot # [ 76.394977] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): environment:2593buildbot # [ 76.396749] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2594buildbot # [ 76.398102] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2595buildbot # [ 76.399489] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2596buildbot # [ 76.403713] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2597buildbot # [ 76.404755] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2598buildbot # [ 76.406410] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2599buildbot # [ 76.407506] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2600buildbot # [ 76.408395] twistd[1069]: 'LANG': 'en_US.UTF-8',2601buildbot # [ 76.409309] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2602buildbot # [ 76.410986] twistd[1069]: 'LOGNAME': 'buildbot-worker',2603buildbot # [ 76.411816] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2604buildbot # [ 76.413109] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2605buildbot # [ 76.414623] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2606buildbot # [ 76.415735] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2607buildbot # [ 76.439847] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2608buildbot # [ 76.442268] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2609buildbot # [ 76.443113] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2610buildbot # [ 76.446146] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2611buildbot # [ 76.447169] twistd[1069]: 'SHLVL': '0',2612buildbot # [ 76.447799] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2613buildbot # [ 76.448711] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2614buildbot # [ 76.450051] twistd[1069]: 'USER': 'buildbot-worker',2615buildbot # [ 76.450812] twistd[1069]: 'WORKER_COUNT': '0',2616buildbot # [ 76.451466] twistd[1069]: 'WORKER_NAME': 'local-worker',2617buildbot # [ 76.456209] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2618buildbot # [ 76.457617] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', '--version']): using PTY: False2619buildbot # [ 76.459016] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0766932620buildbot # [ 76.464922] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command 31): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad0c50>2621buildbot # [ 76.467312] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02622buildbot # [ 76.485666] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteCommand 'stat' at 258998275764176>: RemoteCommand.run [32]2623buildbot # [ 76.505356] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 32): startCommand:stat2624buildbot # [ 76.506571] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 32): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'2625buildbot # [ 76.513448] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 32): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf6aa3607ad70>2626buildbot # [ 76.516886] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 258998275764176> rc=22627buildbot # [ 76.524579] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteCommand 'listdir' at 258998275759376>: RemoteCommand.run [33]2628buildbot # [ 76.553276] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 33): startCommand:listdir2629buildbot # [ 76.554703] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 33): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xf6aa361087d0>2630buildbot # [ 76.560918] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 258998275759376> rc=02631buildbot # [ 76.566138] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteShellCommand '['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']'>: RemoteCommand.run [34]2632buildbot # [ 76.569214] twistd[1068]: 2026-08-23T03:06:00+0000 [-] command '['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']' in dir 'build'2633buildbot # [ 76.601808] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 34): startCommand:shell2634buildbot # [ 76.608519] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): RunProcess._startCommand2635buildbot # [ 76.611157] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): git cat-file -e bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a2636buildbot # [ 76.618986] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2637buildbot # [ 76.626379] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): watching logfiles {}2638buildbot # [ 76.629601] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): argv: [b'git', b'cat-file', b'-e', b'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']2639buildbot # [ 76.636844] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): environment:2640buildbot # [ 76.639318] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2641buildbot # [ 76.640929] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2642buildbot # [ 76.642580] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2643buildbot # [ 76.644059] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2644buildbot # [ 76.645584] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2645buildbot # [ 76.647726] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2646buildbot # [ 76.649393] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2647buildbot # [ 76.650733] twistd[1069]: 'LANG': 'en_US.UTF-8',2648buildbot # [ 76.651763] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2649buildbot # [ 76.654488] twistd[1069]: 'LOGNAME': 'buildbot-worker',2650buildbot # [ 76.655615] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2651buildbot # [ 76.657403] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2652buildbot # [ 76.660727] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2653buildbot # [ 76.662915] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2654buildbot # [ 76.693077] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2655buildbot # [ 76.694711] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2656buildbot # [ 76.695654] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2657buildbot # [ 76.705458] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2658buildbot # [ 76.706468] twistd[1069]: 'SHLVL': '0',2659buildbot # [ 76.707068] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2660buildbot # [ 76.707837] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2661buildbot # [ 76.710854] twistd[1069]: 'USER': 'buildbot-worker',2662buildbot # [ 76.711668] twistd[1069]: 'WORKER_COUNT': '0',2663buildbot # [ 76.715047] twistd[1069]: 'WORKER_NAME': 'local-worker',2664buildbot # [ 76.715892] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2665buildbot # [ 76.718505] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): using PTY: False2666buildbot # [ 76.721992] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command ['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): command finished with signal None, exit code 1, elapsedTime: 0.0908442667buildbot # [ 76.724738] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command 34): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad1250>2668buildbot # [ 76.726918] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'cat-file', '-e', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']'> rc=12669buildbot # [ 76.735479] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'>: RemoteCommand.run [35]2670buildbot # [ 76.739210] twistd[1068]: 2026-08-23T03:06:00+0000 [-] command '['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']' in dir 'build'2671buildbot # [ 76.745132] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 35): startCommand:shell2672buildbot # [ 76.750174] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): RunProcess._startCommand2673buildbot # [ 76.756118] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): git fetch -f --progress http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake test-pr-effects2674buildbot # [ 76.759934] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2675buildbot # [ 76.766878] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): watching logfiles {}2676buildbot # [ 76.770226] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): argv: [b'git', b'fetch', b'-f', b'--progress', b'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', b'test-pr-effects']2677buildbot # [ 76.777567] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): environment:2678buildbot # [ 76.780420] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2679buildbot # [ 76.781469] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2680buildbot # [ 76.782904] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2681buildbot # [ 76.783812] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2682buildbot # [ 76.785259] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2683buildbot # [ 76.786676] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2684buildbot # [ 76.787755] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2685buildbot # [ 76.788957] twistd[1069]: 'LANG': 'en_US.UTF-8',2686buildbot # [ 76.789701] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2687buildbot # [ 76.791582] twistd[1069]: 'LOGNAME': 'buildbot-worker',2688buildbot # [ 76.792535] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2689buildbot # [ 76.793608] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2690buildbot # [ 76.795071] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2691buildbot # [ 76.797191] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2692buildbot # [ 76.823164] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2693buildbot # [ 76.825029] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2694buildbot # [ 76.826408] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2695buildbot # [ 76.828394] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2696buildbot # [ 76.829371] twistd[1069]: 'SHLVL': '0',2697buildbot # [ 76.830233] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2698buildbot # [ 76.831048] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2699buildbot # [ 76.832582] twistd[1069]: 'USER': 'buildbot-worker',2700buildbot # [ 76.833524] twistd[1069]: 'WORKER_COUNT': '0',2701buildbot # [ 76.834272] twistd[1069]: 'WORKER_NAME': 'local-worker',2702buildbot # [ 76.835107] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2703buildbot # [ 76.836994] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): using PTY: False2704buildbot # [ 76.875258] gitea[749]: 2026/08/23 03:06:00 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:35288, 200 OK in 8.1ms @ repo/githttp.go:455(repo.GetInfoRefs)2705buildbot # [ 76.886488] gitea[749]: 2026/08/23 03:06:00 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:35288, 200 OK in 7.6ms @ repo/githttp.go:433(repo.ServiceUploadPack)2706buildbot # [ 76.908191] gitea[749]: 2026/08/23 03:06:00 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:35288, 200 OK in 17.2ms @ repo/githttp.go:433(repo.ServiceUploadPack)2707buildbot # [ 76.938605] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command ['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.1892602708buildbot # [ 76.947351] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command 35): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad1550>2709buildbot # [ 76.950350] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:b54936d9fd70f2b678c18924f0e999604be367a2@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'> rc=02710buildbot # [ 76.971260] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']'>: RemoteCommand.run [36]2711buildbot # [ 76.974763] twistd[1068]: 2026-08-23T03:06:00+0000 [-] command '['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']' in dir 'build'2712buildbot # [ 76.989057] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 36): startCommand:shell2713buildbot # [ 76.993802] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): RunProcess._startCommand2714buildbot # [ 76.995771] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): git checkout -f bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a2715buildbot # [ 77.002093] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2716buildbot # [ 77.006904] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): watching logfiles {}2717buildbot # [ 77.009458] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): argv: [b'git', b'checkout', b'-f', b'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']2718buildbot # [ 77.012338] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): environment:2719buildbot # [ 77.016948] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2720buildbot # [ 77.017929] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2721buildbot # [ 77.019058] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2722buildbot # [ 77.019853] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2723buildbot # [ 77.021042] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2724buildbot # [ 77.022469] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2725buildbot # [ 77.023746] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2726buildbot # [ 77.024764] twistd[1069]: 'LANG': 'en_US.UTF-8',2727buildbot # [ 77.025718] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2728buildbot # [ 77.027395] twistd[1069]: 'LOGNAME': 'buildbot-worker',2729buildbot # [ 77.028340] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2730buildbot # [ 77.029441] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2731buildbot # [ 77.030957] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2732buildbot # [ 77.032082] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2733buildbot # [ 77.055423] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2734buildbot # [ 77.057223] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2735buildbot # [ 77.058826] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2736buildbot # [ 77.060635] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2737buildbot # [ 77.063036] twistd[1069]: 'SHLVL': '0',2738buildbot # [ 77.067141] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2739buildbot # [ 77.070366] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2740buildbot # [ 77.071956] twistd[1069]: 'USER': 'buildbot-worker',2741buildbot # [ 77.074673] twistd[1069]: 'WORKER_COUNT': '0',2742buildbot # [ 77.075477] twistd[1069]: 'WORKER_NAME': 'local-worker',2743buildbot # [ 77.076441] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2744buildbot # [ 77.077842] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): using PTY: False2745buildbot # [ 77.083123] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command ['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']): command finished with signal None, exit code 0, elapsedTime: 0.0886752746buildbot # [ 77.087933] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command 36): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad14d0>2747buildbot # [ 77.090946] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a']'> rc=02748buildbot # [ 77.110185] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'>: RemoteCommand.run [37]2749buildbot # [ 77.111900] twistd[1068]: 2026-08-23T03:06:00+0000 [-] command '['git', 'checkout', '-B', 'test-pr-effects']' in dir 'build'2750buildbot # [ 77.128385] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 37): startCommand:shell2751buildbot # [ 77.129602] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): RunProcess._startCommand2752buildbot # [ 77.131250] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): git checkout -B test-pr-effects2753buildbot # [ 77.136100] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2754buildbot # [ 77.140157] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): watching logfiles {}2755buildbot # [ 77.141849] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): argv: [b'git', b'checkout', b'-B', b'test-pr-effects']2756buildbot # [ 77.143830] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): environment:2757buildbot # [ 77.147329] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2758buildbot # [ 77.148717] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2759buildbot # [ 77.152655] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2760buildbot # [ 77.153556] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2761buildbot # [ 77.154843] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2762buildbot # [ 77.156398] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2763buildbot # [ 77.157643] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2764buildbot # [ 77.158452] twistd[1069]: 'LANG': 'en_US.UTF-8',2765buildbot # [ 77.159198] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2766buildbot # [ 77.161306] twistd[1069]: 'LOGNAME': 'buildbot-worker',2767buildbot # [ 77.162108] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2768buildbot # [ 77.163302] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2769buildbot # [ 77.164950] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2770buildbot # [ 77.166141] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2771buildbot # [ 77.190238] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2772buildbot # [ 77.193046] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2773buildbot # [ 77.193870] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2774buildbot # [ 77.195663] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2775buildbot # [ 77.198068] twistd[1069]: 'SHLVL': '0',2776buildbot # [ 77.198795] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2777buildbot # [ 77.199626] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2778buildbot # [ 77.201314] twistd[1069]: 'USER': 'buildbot-worker',2779buildbot # [ 77.202377] twistd[1069]: 'WORKER_COUNT': '0',2780buildbot # [ 77.203148] twistd[1069]: 'WORKER_NAME': 'local-worker',2781buildbot # [ 77.204466] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2782buildbot # [ 77.207809] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): using PTY: False2783buildbot # [ 77.210997] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command ['git', 'checkout', '-B', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.0842852784buildbot # [ 77.217021] twistd[1069]: 2026-08-23T03:06:00+0000 [-] (command 37): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad1c50>2785buildbot # [ 77.219198] twistd[1068]: 2026-08-23T03:06:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'> rc=02786buildbot # [ 77.240763] twistd[1068]: 2026-08-23T03:06:00+0000 [-] <RemoteShellCommand '['git', 'submodule', 'sync']'>: RemoteCommand.run [38]2787buildbot # [ 77.242316] twistd[1068]: 2026-08-23T03:06:00+0000 [-] command '['git', 'submodule', 'sync']' in dir 'build'2788buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2789buildbot # [ 77.264997] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command 38): startCommand:shell2790buildbot # [ 77.269542] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): RunProcess._startCommand2791buildbot # [ 77.270972] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): git submodule sync2792buildbot # [ 77.275915] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2793buildbot # [ 77.278295] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): watching logfiles {}2794buildbot # [ 77.279664] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): argv: [b'git', b'submodule', b'sync']2795buildbot # [ 77.285324] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): environment:2796buildbot # [ 77.287149] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2797buildbot # [ 77.291708] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2798buildbot # [ 77.293716] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2799buildbot # [ 77.294892] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2800buildbot # [ 77.297104] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2801buildbot # [ 77.299972] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2802buildbot # [ 77.302440] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2803buildbot # [ 77.303866] twistd[1069]: 'LANG': 'en_US.UTF-8',2804buildbot # [ 77.305255] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2805buildbot # [ 77.307184] twistd[1069]: 'LOGNAME': 'buildbot-worker',2806buildbot # [ 77.312514] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2807buildbot # [ 77.314451] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2808buildbot # [ 77.315997] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2809buildbot # [ 77.317674] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2810buildbot # [ 77.341261] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2811buildbot # [ 77.343265] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2812buildbot # [ 77.344363] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2813buildbot # [ 77.346496] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2814buildbot # [ 77.347691] twistd[1069]: 'SHLVL': '0',2815buildbot # [ 77.348875] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2816buildbot # [ 77.349780] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2817buildbot # [ 77.351217] twistd[1069]: 'USER': 'buildbot-worker',2818buildbot # [ 77.352120] twistd[1069]: 'WORKER_COUNT': '0',2819buildbot # [ 77.353947] twistd[1069]: 'WORKER_NAME': 'local-worker',2820buildbot # [ 77.354909] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2821buildbot # [ 77.357584] twistd[1069]: 2026-08-23T03:06:00+0000 [Broker,client] (command ['git', 'submodule', 'sync']): using PTY: False2822buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2823buildbot # Dload Upload Total Spent Left Speed2824buildbot # 0 0 0 0 0 0 0 0 0100 1894 100 1894 0 0 96988 0 0100 1894 100 1894 0 0 80919 0 0100 1894 100 1894 0 0 68817 0 02825buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.18 seconds)2826buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2827buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2828buildbot # Dload Upload Total Spent Left Speed2829buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 39955 0 0100 937 100 937 0 0 34109 0 0100 937 100 937 0 0 31412 0 02830buildbot # [ 77.533675] twistd[1069]: 2026-08-23T03:06:01+0000 [-] (command ['git', 'submodule', 'sync']): command finished with signal None, exit code 0, elapsedTime: 0.2648392831buildbot # [ 77.535588] twistd[1069]: 2026-08-23T03:06:01+0000 [-] (command 38): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad08d0>2832buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)2833buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2834buildbot # [ 77.545451] twistd[1068]: 2026-08-23T03:06:01+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'sync']'> rc=02835buildbot # [ 77.568688] twistd[1068]: 2026-08-23T03:06:01+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'>: RemoteCommand.run [39]2836buildbot # [ 77.572821] twistd[1068]: 2026-08-23T03:06:01+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']' in dir 'build'2837buildbot # [ 77.588505] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command 39): startCommand:shell2838buildbot # [ 77.589840] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): RunProcess._startCommand2839buildbot # [ 77.595924] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): git submodule update --init --recursive --force --checkout2840buildbot # [ 77.599838] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2841buildbot # [ 77.605047] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): watching logfiles {}2842buildbot # [ 77.607374] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive', b'--force', b'--checkout']2843buildbot # [ 77.613479] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): environment:2844buildbot # [ 77.615749] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2845buildbot # [ 77.617142] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2846buildbot # [ 77.618542] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2847buildbot # [ 77.619651] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2848buildbot # [ 77.621120] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2849buildbot # [ 77.622754] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2850buildbot # [ 77.623842] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2851buildbot # [ 77.625269] twistd[1069]: 'LANG': 'en_US.UTF-8',2852buildbot # [ 77.626234] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2853buildbot # [ 77.628143] twistd[1069]: 'LOGNAME': 'buildbot-worker',2854buildbot # [ 77.629707] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2855buildbot # [ 77.635288] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2856buildbot # [ 77.637220] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2857buildbot # [ 77.638658] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2858buildbot # [ 77.664756] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2859buildbot # [ 77.666630] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2860buildbot # [ 77.667876] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2861buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2862buildbot # Dload Upload Total Spent Left Speed2863buildbot # 0 0 0 0 0 0 0 0[ 77.669960] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2864buildbot # 0[ 77.690419] twistd[1069]: 'SHLVL': '0',2865buildbot # [ 77.693149] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2866buildbot # [ 77.693889] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2867buildbot # [ 77.695171] twistd[1069]: 'USER': 'buildbot-worker',2868buildbot # [ 77.695863] twistd[1069]: 'WORKER_COUNT': '0',2869buildbot # 100 2095 100 2095 0 0 64084 0 0100 2095 100 2095 0 0 59705 [ 77.704154] twistd[1069]: 'WORKER_NAME': 'local-worker',2870buildbot # [ 77.705164] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2871buildbot # [ 77.706592] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): using PTY: False2872buildbot # 0 0100 2095 100 2095 0 0 48144 0 02873buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.18 seconds)2874buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2875buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2876buildbot # Dload Upload Total Spent Left Speed2877buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 59644 0 0100 1735 100 1735 0 0 55082 0 0100 1735 100 1735 0 0 45184 0 02878buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.10 seconds)2879buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2880buildbot # [ 77.842961] twistd[1069]: 2026-08-23T03:06:01+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): command finished with signal None, exit code 0, elapsedTime: 0.2524942881buildbot # [ 77.849200] twistd[1069]: 2026-08-23T03:06:01+0000 [-] (command 39): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad1850>2882buildbot # [ 77.854670] twistd[1068]: 2026-08-23T03:06:01+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'> rc=02883buildbot # [ 77.873886] twistd[1068]: 2026-08-23T03:06:01+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [40]2884buildbot # [ 77.877336] twistd[1068]: 2026-08-23T03:06:01+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'2885buildbot # [ 77.892670] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command 40): startCommand:shell2886buildbot # [ 77.893883] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand2887buildbot # [ 77.895362] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD2888buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2889buildbot # Dload Upload Total Spent Left Speed2890buildbot # 0 0 0 0 0 0 [ 77.908210] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2891buildbot # [ 77.910512] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}2892buildbot # [ 77.911974] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']2893buildbot # 0 0 0[ 77.918690] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:2894buildbot # [ 77.922677] twistd[1069]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2895buildbot # [ 77.923634] twistd[1069]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2896buildbot # 10[ 77.927713] twistd[1069]: 'HOME': '/var/lib/buildbot-worker',2897buildbot # 0 1735 100 1735 0 0 58411 0 0100 1735 100 1735 [ 77.932140] twistd[1069]: 'INVOCATION_ID': '278e533172e142d3a013a3c61c9298a5',2898buildbot # [ 77.933417] twistd[1069]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2899buildbot # 0 0 5[ 77.936664] twistd[1069]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2900buildbot # 1217 0 0100 [ 77.940596] twistd[1069]: 'JOURNAL_STREAM': '9:12702',2901buildbot # 1735 [ 77.942120] twistd[1069]: 'LANG': 'en_US.UTF-8',2902buildbot # 100 1735 0 0 40908 0 [ 77.944105] twistd[1069]: 'LOCALE_ARCHIVE': '/nix/store/167aam1j5yj2jkxwzfxbnlx39k5j1by7-glibc-locales-2.42-67/lib/locale/locale-archive',2903buildbot # [ 77.945707] twistd[1069]: 'LOGNAME': 'buildbot-worker',2904buildbot # [ 77.946433] twistd[1069]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2905buildbot # [ 77.947699] twistd[1069]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2906buildbot # 02907buildbot # [ 77.953793] twistd[1069]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2908buildbot # [ 77.954948] twistd[1069]: 'PATH': '/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin:/nix/store/vyy1xl89pxlrds3v2zhx4fa597sqfml8-python3.14-twisted-26.4.0/bin:/nix/store/fc1nc415ydiszyld6kqn9y5gzzdxq8g9-python3.14-automat-25.4.16/bin:/nix/store/6qlyn6314ppjpnq141zjr1y3zwzv307w-python3.14-idna-3.18/bin:/nix/store/a7s6dws40ir54qrw2pr16dk67lfmb5r2-python3.14-incremental-24.11.0/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/bin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/bin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/bin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/bin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/bin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/bin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/bin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/bin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/bin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/bin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/bin:/nix/store/zry4xlbsjjvqmhynpv4js1b098dyhac7-cachix-1.11.1-bin/sbin:/nix/store/q3pvpkn0qmin7x572p3z32hxz9yny73i-git-2.55.0/sbin:/nix/store/jvcwmx4wbygp7wl73x9n5aisr548psgg-openssh-10.5p1/sbin:/nix/store/c7yzcw6484sgpdfsii4ppjp87djdgh6y-nix-2.34.8/sbin:/nix/store/a9kda025a17126f14c01xpwscmjqddwb-bash-interactive-5.3p15/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/3prixp33jfmdy1cdmfwvvydihsmw9gkj-nix-eval-jobs-2.35.1/sbin:/nix/store/dyq01qix6znxv7kp4rphq2z4dzyp9yd0-buildbot-effects/sbin:/nix/store/dqxknsb71lsgzfzcdmn6x7fzssqbdyyx-coreutils-9.11/sbin:/nix/store/4fj1rs40wx8r4pbbzrjzmzxv4dg4aia5-findutils-4.11.0/sbin:/nix/store/07gribxm3sky3lw2g64n59l974q7q1bf-gnugrep-3.12/sbin:/nix/store/p6k41cfwvr8plgvcnnlb55wb0cy49qyx-gnused-4.10/sbin:/nix/store/pyrvwmigi6qdpz9lbbslj5771pfl7r69-systemd-261.1/sbin',2909buildbot # [ 77.983688] twistd[1069]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2910buildbot # [ 77.986802] twistd[1069]: 'PYTHONNOUSERSITE': 'true',2911buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.17 seconds)2912buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2913buildbot # [ 77.991245] twistd[1069]: 'PYTHONPATH': '/nix/store/s818yha3f17hy2agy21i3saicwjmh17f-python3-3.14.7-env/lib/python3.14/site-packages',2914buildbot # [ 77.995939] twistd[1069]: 'SHELL': '/run/current-system/sw/bin/bash',2915buildbot # [ 78.003003] twistd[1069]: 'SHLVL': '0',2916buildbot # [ 78.003596] twistd[1069]: 'SYSTEMD_EXEC_PID': '1069',2917buildbot # [ 78.006842] twistd[1069]: 'TZDIR': '/nix/store/l06hkrvzgb0iw5pbz6j5xzhkqs2bns6p-tzdata-2026c/share/zoneinfo',2918buildbot # [ 78.011211] twistd[1069]: 'USER': 'buildbot-worker',2919buildbot # [ 78.011952] twistd[1069]: 'WORKER_COUNT': '0',2920buildbot # [ 78.013254] twistd[1069]: 'WORKER_NAME': 'local-worker',2921buildbot # [ 78.016873] twistd[1069]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2922buildbot # [ 78.018249] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False2923buildbot # [ 78.019688] twistd[1069]: 2026-08-23T03:06:01+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0599962924buildbot # [ 78.024474] twistd[1069]: 2026-08-23T03:06:01+0000 [-] (command 40): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad2050>2925buildbot # [ 78.030544] twistd[1068]: 2026-08-23T03:06:01+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=02926buildbot # [ 78.035860] twistd[1068]: 2026-08-23T03:06:01+0000 [-] Got Git revision bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a2927buildbot # [ 78.049775] twistd[1068]: 2026-08-23T03:06:01+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []2928buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2929buildbot # Dload Upload Total Spent Left Speed2930buildbot # 0 0 0 0 0 0 0 0 0[ 78.084760] twistd[1068]: 2026-08-23T03:06:01+0000 [-] step 'git' complete: success (None)2931buildbot # 100 2935 100 2935 0 0 160.6k 0 0100 2935 100 2935 0 0 132.1k 0 0100 2935 100 2935 0 0 119.0k 0 02932buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.12 seconds)2933buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2934buildbot # [ 78.110959] twistd[1068]: 2026-08-23T03:06:01+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [41]2935buildbot # [ 78.120508] twistd[1068]: 2026-08-23T03:06:01+0000 [-] command '['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'2936buildbot # [ 78.126598] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command 41): startCommand:shell2937buildbot # [ 78.130190] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand2938buildbot # [ 78.138765] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a --branch test-pr-effects --repo gitea-admin/test-flake test-effect2939buildbot # [ 78.144222] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2940buildbot # [ 78.151347] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}2941buildbot # [ 78.157872] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake', b'test-effect']2942buildbot # [ 78.163173] twistd[1069]: 2026-08-23T03:06:01+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False2943buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2944buildbot # Dload Upload Total Spent Left Speed2945buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 111.7k 0 0100 2935 100 2935 0 0 101.0k 0 0100 2935 100 2935 0 0 95562 0 02946buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.14 seconds)2947buildbot # [ 78.496742] nix-daemon[1342]: accepted connection from pid 2065, user buildbot-worker2948buildbot # [ 78.545715] twistd[1069]: 2026-08-23T03:06:02+0000 [-] (command ['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.4284592949buildbot # [ 78.553216] twistd[1069]: 2026-08-23T03:06:02+0000 [-] (command 41): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf6aa35ad28d0>2950buildbot # [ 78.555410] twistd[1068]: 2026-08-23T03:06:02+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', 'bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=12951buildbot # [ 78.587503] twistd[1068]: 2026-08-23T03:06:02+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []2952buildbot # [ 78.597718] twistd[1068]: 2026-08-23T03:06:02+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])2953buildbot # [ 78.601207] twistd[1068]: 2026-08-23T03:06:02+0000 [-] <Build gitea-admin/test-flake/run-effect number:2 results:failure>: build finished2954buildbot # [ 78.611767] twistd[1068]: 2026-08-23T03:06:02+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2955buildbot # [ 78.788481] twistd[1068]: 2026-08-23T03:06:02+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []2956buildbot # [ 78.806892] twistd[1068]: 2026-08-23T03:06:02+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])2957buildbot # [ 78.832603] twistd[1068]: 2026-08-23T03:06:02+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xeb8ebc567a10>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc58b530>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb8ebc588670>, logEnviron=False)): []2958buildbot # [ 78.853909] twistd[1068]: 2026-08-23T03:06:02+0000 [-] step 'Evaluate scheduled effects' complete: skipped (None)2959buildbot # [ 78.857121] twistd[1068]: 2026-08-23T03:06:02+0000 [-] <Build gitea-admin/test-flake/nix-eval number:2 results:failure>: build finished2960buildbot # [ 78.871628] twistd[1068]: 2026-08-23T03:06:02+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2961buildbot # [ 78.925351] gitea[749]: 2026/08/23 03:06:02 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/bdec531d4b0d8e36b3eb35ea1d1b1cee4f7c028a for [::1]:51146, 201 Created in 99.8ms @ repo/status.go:21(repo.NewCommitStatus)2962buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2963buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2964buildbot # Dload Upload Total Spent Left Speed2965buildbot # 0 0 0 0 0 0 0 0 0100 1979 100 1979 0 0 98.04k 0 0100 1979 100 1979 0 0 79647 0 0100 1979 100 1979 0 0 69673 0 02966buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2967buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2968buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2969buildbot # Dload Upload Total Spent Left Speed2970buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 67795 0 0100 937 100 937 0 0 54817 0 0100 937 100 937 0 0 47083 0 02971buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2972buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2973buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2974buildbot # Dload Upload Total Spent Left Speed2975buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 138.5k 0 0100 2095 100 2095 0 0 119.1k 0 0100 2095 100 2095 0 0 104.0k 0 02976buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2977buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2978buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2979buildbot # Dload Upload Total Spent Left Speed2980buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 150.7k 0 0100 1735 100 1735 0 0 124.0k 0 0100 1735 100 1735 0 0 99.93k 0 02981buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2982buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2983buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2984buildbot # Dload Upload Total Spent Left Speed2985buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 152.0k 0 0100 1735 100 1735 0 0 124.5k 0 0100 1735 100 1735 0 0 104.1k 0 02986buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2987buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2988buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2989buildbot # Dload Upload Total Spent Left Speed2990buildbot # 0 0 0 0 0 0 0 0 0100 2104 100 2104 0 0 184.9k 0 0100 2104 100 2104 0 0 151.9k 0 0100 2104 100 2104 0 0 127.0k 0 02991buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.06 seconds)2992buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2993buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2994buildbot # Dload Upload Total Spent Left Speed2995buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 252.7k 0 0100 2935 100 2935 0 0 208.3k 0 0100 2935 100 2935 0 0 174.8k 0 02996buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2997buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2998buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2999buildbot # Dload Upload Total Spent Left Speed3000buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 252.3k 0 0100 2935 100 2935 0 0 203.4k 0 0100 2935 100 2935 0 0 174.5k 0 03001buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)3002buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps3003buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3004buildbot # Dload Upload Total Spent Left Speed3005buildbot # 0 0 0 0 0 0 0 0 0100 3518 100 3518 0 0 268.7k 0 0100 3518 100 3518 0 0 225.7k 0 0100 3518 100 3518 0 0 191.5k 0 03006buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps, in 0.06 seconds)3007buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps3008buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3009buildbot # Dload Upload Total Spent Left Speed3010buildbot # 0 0 0 0 0 0 0 0 0100 3518 100 3518 0 0 272.3k 0 0100 3518 100 3518 0 0 223.7k 0 0100 3518 100 3518 0 0 194.1k 0 03011buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps, in 0.06 seconds)3012(finished: subtest: PR with effects_on_pull_requests runs effects, in 18.04 seconds)3013(finished: run the VM test script, in 80.73 seconds)3014test script finished in 80.77s3015cleanup3016kill QemuMachine (pid 45)3017buildbot # qemu-system-aarch64: terminating on signal 15 from pid 39 (/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin/python3.14)3018(finished: cleanup, in 0.32 seconds)3019additionally exposed symbols:3020 buildbot,3021 vlan1,3022 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh3023Token created: b54936d9fd...3024{'meta': {'total': 0}, 'projects': []}3025Project not yet registered, current projects: []3026{'meta': {'total': 1},3027 'projects': [{'active': None,3028 'description': None,3029 'description_format': None,3030 'description_html': None,3031 'name': 'gitea-admin/test-flake',3032 'projectid': 1,3033 'slug': 'gitea-admin/test-flake'}]}3034nix-eval build not found yet3035nix-eval build not found yet3036nix-eval build not found yet3037nix-eval build not found yet3038nix-eval build not found yet3039nix-eval build not found yet3040nix-eval build not found yet3041nix-eval build still running3042nix-eval build still running3043nix-eval build still running3044nix-eval build still running3045nix-eval build still running3046nix-eval build still running3047nix-eval build still running3048nix-eval build still running3049nix-eval build still running3050nix-eval build still running3051nix-eval build still running3052nix-eval build completed with result: 23053PR eval build not found yet3054PR eval build still running3055PR eval build still running3056PR eval build still running3057PR eval build still running3058PR eval build still running3059PR eval build still running3060PR eval build still running3061PR eval build still running3062PR eval build still running3063PR eval build result: 2