vm-test-run-buildbot-nix-poller
checks.aarch64-linux.poller
· build #56
· raw
1tribuchet: building on eliza2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 45)12buildbot # Formatting '/build/vm-state-buildbot/tmp.ggn07eFcmS', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: b05578a2-9bb1-4433-9eb5-0cd19904881417buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40]27buildbot # [ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Wed Aug 19 16:18:21 UTC 202628buildbot # [ 0.000000] KASLR enabled29buildbot # [ 0.000000] random: crng init done30buildbot # [ 0.000000] Machine model: linux,dummy-virt31buildbot # [ 0.000000] efi: UEFI not found.32buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT33buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]34buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded700-0x7fdf0e7f]35buildbot # [ 0.000000] Zone ranges:36buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]37buildbot # [ 0.000000] DMA32 empty38buildbot # [ 0.000000] Normal empty39buildbot # [ 0.000000] Device empty40buildbot # [ 0.000000] Movable zone start for each node41buildbot # [ 0.000000] Early memory node ranges42buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]43buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]44buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc0000045buildbot # [ 0.000000] psci: probing for conduit method from DT.46buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware.47buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs48buildbot # [ 0.000000] psci: Trusted OS migration not required49buildbot # [ 0.000000] psci: SMC Calling Convention v1.150buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)51buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186712 r8192 d116392 u31129652buildbot # [ 0.000000] Detected PIPT I-cache on CPU053buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm)54buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface55buildbot # [ 0.000000] CPU features: detected: Spectre-v456buildbot # [ 0.000000] CPU features: detected: Spectre-BHB57buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_3858buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_2359buildbot # [ 0.000000] alternatives: applying boot alternatives60buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/pm6cmivnagnsrpj64m2vbdk9kz73n8vi-nixos-system-buildbot-test/init regInfo=/nix/store/wa2xcqisvx8i6lclxb55h3rif27fqqi6-closure-info/registration console=ttyAMA0,115200n8 console=tty061buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/wa2xcqisvx8i6lclxb55h3rif27fqqi6-closure-info/registration", will be passed to user space.62buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes63buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)64buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)65buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB66buildbot # [ 0.000000] software IO TLB: area num 1.67buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB)68buildbot # [ 0.000000] Fallback order for Node 0: 069buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 26214470buildbot # [ 0.000000] Policy zone: DMA71buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off72buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=173buildbot # [ 0.000000] allocated 2097152 bytes of page_ext74buildbot # [ 0.000000] ftrace: allocating 74881 entries in 294 pages75buildbot # [ 0.000000] ftrace: allocated 294 pages with 4 groups76buildbot # [ 0.000000] rcu: Hierarchical RCU implementation.77buildbot # [ 0.000000] rcu: RCU event tracing is enabled.78buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.79buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled.80buildbot # [ 0.000000] Rude variant of Tasks RCU enabled.81buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled.82buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.83buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=184buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.85buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.86buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.87buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 088buildbot # [ 0.000000] GICv3: 256 SPIs implemented89buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented90buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq91buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI92buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=093buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a000094buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff]95buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44cf0000 (indirect, esz 8, psz 64K, shr 1)96buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44d00000 (flat, esz 8, psz 64K, shr 1)97buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d1000098buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d2000099buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.100buildbot # [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns101buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).102buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns103buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns104buildbot # [ 0.000031] arm-pv: using stolen time PV105buildbot # [ 0.000520] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)106buildbot # [ 0.000691] Console: colour dummy device 80x25107buildbot # [ 0.000698] printk: legacy console [tty0] enabled108buildbot # [ 0.000882] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000)109buildbot # [ 0.000890] pid_max: default: 32768 minimum: 301110buildbot # [ 0.000957] LSM: initializing lsm=capability,landlock,yama,bpf,ima111buildbot # [ 0.001094] landlock: Up and running.112buildbot # [ 0.001097] Yama: becoming mindful.113buildbot # [ 0.001621] LSM support for eBPF active114buildbot # [ 0.001751] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)115buildbot # [ 0.001771] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)116buildbot # [ 0.002824] cacheinfo: Unable to detect cache hierarchy for CPU 0117buildbot # [ 0.003886] rcu: Hierarchical SRCU implementation.118buildbot # [ 0.003891] rcu: Max phase no-delay instances is 1000.119buildbot # [ 0.005029] fsl-mc MSI: its@8080000 domain created120buildbot # [ 0.005116] EFI services will not be available.121buildbot # [ 0.005179] smp: Bringing up secondary CPUs ...122buildbot # [ 0.005187] smp: Brought up 1 node, 1 CPU123buildbot # [ 0.005190] SMP: Total of 1 processors activated.124buildbot # [ 0.005193] CPU: All CPU(s) started at EL1125buildbot # [ 0.005205] CPU features: detected: Branch Target Identification126buildbot # [ 0.005210] CPU features: detected: ARMv8.4 Translation Table Level127buildbot # [ 0.005213] CPU features: detected: Instruction cache invalidation not required for I/D coherence128buildbot # [ 0.005217] CPU features: detected: Data cache clean to the PoU not required for I/D coherence129buildbot # [ 0.005220] CPU features: detected: Common not Private translations130buildbot # [ 0.005224] CPU features: detected: CRC32 instructions131buildbot # [ 0.005226] CPU features: detected: Data cache clean to Point of Deep Persistence132buildbot # [ 0.005230] CPU features: detected: Data cache clean to Point of Persistence133buildbot # [ 0.005233] CPU features: detected: Data independent timing control (DIT)134buildbot # [ 0.005236] CPU features: detected: E0PD135buildbot # [ 0.005238] CPU features: detected: Enhanced Counter Virtualization136buildbot # [ 0.005241] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)137buildbot # [ 0.005245] CPU features: detected: Enhanced Virtualization Traps138buildbot # [ 0.005248] CPU features: detected: Fine Grained Traps139buildbot # [ 0.005251] CPU features: detected: Generic authentication (architected QARMA5 algorithm)140buildbot # [ 0.005256] CPU features: detected: RCpc load-acquire (LDAPR)141buildbot # [ 0.005259] CPU features: detected: LSE atomic instructions142buildbot # [ 0.005262] CPU features: detected: Privileged Access Never143buildbot # [ 0.005265] CPU features: detected: PMUv3144buildbot # [ 0.005267] CPU features: detected: RAS Extension Support145buildbot # [ 0.005270] CPU features: detected: RASv1p1 Extension Support146buildbot # [ 0.005273] CPU features: detected: Random Number Generator147buildbot # [ 0.005275] CPU features: detected: Speculation barrier (SB)148buildbot # [ 0.005278] CPU features: detected: Stage-2 Force Write-Back149buildbot # [ 0.005281] CPU features: detected: TLB range maintenance instructions150buildbot # [ 0.005286] CPU features: detected: Speculative Store Bypassing Safe (SSBS)151buildbot # [ 0.005323] alternatives: applying system-wide alternatives152buildbot # [ 0.008131] CPU features: detected: BBM Level 2 without TLB conflict abort153buildbot # [ 0.008300] Memory: 893424K/1048576K available (24448K kernel code, 7090K rwdata, 26344K rodata, 4736K init, 1107K bss, 113800K reserved, 32768K cma-reserved)154buildbot # [ 0.008621] devtmpfs: initialized155buildbot # [ 0.010373] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)156buildbot # [ 0.010394] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).157buildbot # [ 0.010560] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL158buildbot # [ 0.010564] 0 pages in range for non-PLT usage159buildbot # [ 0.010565] 508288 pages in range for PLT usage160buildbot # [ 0.010668] pinctrl core: initialized pinctrl subsystem161buildbot # [ 0.011422] DMI not present or invalid.162buildbot # [ 0.014621] NET: Registered PF_NETLINK/PF_ROUTE protocol family163buildbot # [ 0.016747] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations164buildbot # [ 0.016885] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations165buildbot # [ 0.017044] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations166buildbot # [ 0.017065] audit: initializing netlink subsys (disabled)167buildbot # [ 0.017569] thermal_sys: Registered thermal governor 'fair_share'168buildbot # [ 0.017571] thermal_sys: Registered thermal governor 'bang_bang'169buildbot # [ 0.017575] thermal_sys: Registered thermal governor 'step_wise'170buildbot # [ 0.017578] thermal_sys: Registered thermal governor 'user_space'171buildbot # [ 0.017583] thermal_sys: Registered thermal governor 'power_allocator'172buildbot # [ 0.017627] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1173buildbot # [ 0.017637] cpuidle: using governor ladder174buildbot # [ 0.017642] cpuidle: using governor menu175buildbot # [ 0.017843] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers.176buildbot # [ 0.017859] ASID allocator initialised with 65536 entries177buildbot # [ 0.019126] Serial: AMBA PL011 UART driver178buildbot # [ 0.024357] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1179buildbot # [ 0.024503] printk: console [ttyAMA0] enabled180buildbot # [ 0.147635] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages181buildbot # [ 0.147651] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page182buildbot # [ 0.147657] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages183buildbot # [ 0.147661] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page184buildbot # [ 0.147665] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages185buildbot # [ 0.147670] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page186buildbot # [ 0.147674] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages187buildbot # [ 0.147678] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page188buildbot # [ 0.155051] fbcon: Taking over console189buildbot # [ 0.155066] ACPI: Interpreter disabled.190buildbot # [ 0.156890] iommu: Default domain type: Translated191buildbot # [ 0.156900] iommu: DMA domain TLB invalidation policy: strict mode192buildbot # [ 0.158558] SCSI subsystem initialized193buildbot # [ 0.163987] usbcore: registered new interface driver usbfs194buildbot # [ 0.164019] usbcore: registered new interface driver hub195buildbot # [ 0.164036] usbcore: registered new device driver usb196buildbot # [ 0.164295] pps_core: LinuxPPS API ver. 1 registered197buildbot # [ 0.164302] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>198buildbot # [ 0.164312] PTP clock support registered199buildbot # [ 0.164359] EDAC MC: Ver: 3.0.0200buildbot # [ 0.169032] scmi_core: SCMI protocol bus registered201buildbot # [ 0.169984] FPGA manager framework202buildbot # [ 0.170928] vgaarb: loaded203buildbot # [ 0.171544] clocksource: Switched to clocksource arch_sys_counter204buildbot # [ 0.175059] VFS: Disk quotas dquot_6.6.0205buildbot # [ 0.175110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)206buildbot # [ 0.178760] netfs: FS-Cache loaded207buildbot # [ 0.178878] pnp: PnP ACPI: disabled208buildbot # [ 0.183161] NET: Registered PF_INET protocol family209buildbot # [ 0.183318] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)210buildbot # [ 0.211203] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)211buildbot # [ 0.211238] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)212buildbot # [ 0.211262] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)213buildbot # [ 0.211305] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)214buildbot # [ 0.211382] TCP: Hash tables configured (established 8192 bind 8192)215buildbot # [ 0.211449] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)216buildbot # [ 0.211503] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)217buildbot # [ 0.217828] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)218buildbot # [ 0.217939] NET: Registered PF_UNIX/PF_LOCAL protocol family219buildbot # [ 0.217959] NET: Registered PF_XDP protocol family220buildbot # [ 0.217978] PCI: CLS 0 bytes, default 64221buildbot # [ 0.218193] Trying to unpack rootfs image as initramfs...222buildbot # [ 0.226768] kvm [1]: HYP mode not available223buildbot # [ 0.316039] Initialise system trusted keyrings224buildbot # [ 0.316748] workingset: timestamp_bits=42 max_order=18 bucket_order=0225buildbot # [ 0.318013] squashfs: version 4.0 (2009/01/31) Phillip Lougher226buildbot # [ 0.318767] 9p: Installing v9fs 9p2000 file system support227buildbot # [ 0.347737] Key type asymmetric registered228buildbot # [ 0.347759] Asymmetric key parser 'x509' registered229buildbot # [ 0.347813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)230buildbot # [ 0.349879] io scheduler mq-deadline registered231buildbot # [ 0.349891] io scheduler kyber registered232buildbot # [ 0.359730] pl061_gpio 9030000.pl061: PL061 GPIO chip registered233buildbot # [ 0.361071] ledtrig-cpu: registered to indicate activity on CPUs234buildbot # [ 0.361443] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:235buildbot # [ 0.361460] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000236buildbot # [ 0.361481] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000237buildbot # [ 0.361491] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000238buildbot # [ 0.361518] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits239buildbot # [ 0.361541] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]240buildbot # [ 0.361613] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00241buildbot # [ 0.361623] pci_bus 0000:00: root bus resource [bus 00-ff]242buildbot # [ 0.361630] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]243buildbot # [ 0.361637] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]244buildbot # [ 0.361643] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]245buildbot # [ 0.361698] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint246buildbot # [ 0.362130] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint247buildbot # [ 0.362314] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f]248buildbot # [ 0.362331] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]249buildbot # [ 0.362360] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]250buildbot # [ 0.362377] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]251buildbot # [ 0.362817] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint252buildbot # [ 0.362999] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f]253buildbot # [ 0.363015] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]254buildbot # [ 0.363044] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]255buildbot # [ 0.363480] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint256buildbot # [ 0.384527] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f]257buildbot # [ 0.384558] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]258buildbot # [ 0.384588] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]259buildbot # [ 0.385120] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint260buildbot # [ 0.385309] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f]261buildbot # [ 0.385325] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]262buildbot # [ 0.385356] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]263buildbot # [ 0.385816] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint264buildbot # [ 0.386003] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f]265buildbot # [ 0.386020] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]266buildbot # [ 0.386050] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]267buildbot # [ 0.386545] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint268buildbot # [ 0.386735] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f]269buildbot # [ 0.386751] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]270buildbot # [ 0.386781] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]271buildbot # [ 0.387241] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint272buildbot # [ 0.387430] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f]273buildbot # [ 0.387446] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff]274buildbot # [ 0.387477] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]275buildbot # [ 0.387493] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref]276buildbot # [ 0.408038] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint277buildbot # [ 0.408246] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]278buildbot # [ 0.408278] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]279buildbot # [ 0.408753] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint280buildbot # [ 0.408947] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]281buildbot # [ 0.408977] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]282buildbot # [ 0.409373] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint283buildbot # [ 0.409561] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff]284buildbot # [ 0.409810] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint285buildbot # [ 0.410065] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f]286buildbot # [ 0.410084] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]287buildbot # [ 0.410113] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]288buildbot # [ 0.410576] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint289buildbot # [ 0.410764] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f]290buildbot # [ 0.410780] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]291buildbot # [ 0.410810] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]292buildbot # [ 0.411398] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned293buildbot # [ 0.411410] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned294buildbot # [ 0.411417] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned295buildbot # [ 0.411463] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned296buildbot # [ 0.411512] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned297buildbot # [ 0.435609] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned298buildbot # [ 0.435671] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned299buildbot # [ 0.435721] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned300buildbot # [ 0.435770] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned301buildbot # [ 0.435820] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned302buildbot # [ 0.435870] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned303buildbot # [ 0.435919] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned304buildbot # [ 0.436020] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned305buildbot # [ 0.436070] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned306buildbot # [ 0.436093] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned307buildbot # [ 0.436116] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned308buildbot # [ 0.436139] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned309buildbot # [ 0.436162] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned310buildbot # [ 0.436187] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned311buildbot # [ 0.436210] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned312buildbot # [ 0.436233] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned313buildbot # [ 0.436256] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned314buildbot # [ 0.436278] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned315buildbot # [ 0.436302] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned316buildbot # [ 0.436326] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned317buildbot # [ 0.436348] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned318buildbot # [ 0.436370] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned319buildbot # [ 0.436392] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned320buildbot # [ 0.436413] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned321buildbot # [ 0.436435] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned322buildbot # [ 0.436469] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned323buildbot # [ 0.436491] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned324buildbot # [ 0.436514] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned325buildbot # [ 0.436536] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned326buildbot # [ 0.436566] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]327buildbot # [ 0.436577] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]328buildbot # [ 0.436582] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]329buildbot # [ 0.437756] pci 0000:00:0a.0: enabling device (0000 -> 0002)330buildbot # [ 0.489847] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)331buildbot # [ 0.499784] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)332buildbot # [ 0.503447] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)333buildbot # [ 0.505413] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)334buildbot # [ 0.507256] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)335buildbot # [ 0.517230] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)336buildbot # [ 0.519288] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003)337buildbot # [ 0.530522] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)338buildbot # [ 0.540478] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)339buildbot # [ 0.544528] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)340buildbot # [ 0.546793] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)341buildbot # [ 0.567797] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled342buildbot # [ 0.570502] msm_serial: driver initialized343buildbot # [ 0.570637] SuperH (H)SCI(F) driver initialized344buildbot # [ 0.570691] STM32 USART driver initialized345buildbot # [ 0.602280] loop: module loaded346buildbot # [ 0.602440] virtio_blk virtio5: 1/0/0 default/read/poll queues347buildbot # [ 0.603144] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)348buildbot # [ 0.608110] megasas: 07.734.00.00-rc1349buildbot # [ 0.608894] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]350buildbot # [ 0.610912] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000351buildbot # [ 0.610932] Intel/Sharp Extended Query Table at 0x0031352buildbot # [ 0.620426] Using buffer write method353buildbot # [ 0.620515] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]354buildbot # [ 0.623273] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000355buildbot # [ 0.623297] Intel/Sharp Extended Query Table at 0x0031356buildbot # [ 0.636520] Using buffer write method357buildbot # [ 0.636554] Concatenating MTD devices:358buildbot # [ 0.636558] (0): "0.flash"359buildbot # [ 0.636562] (1): "0.flash"360buildbot # [ 0.636566] into device "0.flash"361buildbot # [ 0.851858] Freeing initrd memory: 26940K362buildbot # [ 0.857781] tun: Universal TUN/TAP device driver, 1.6363buildbot # [ 0.861327] thunder_xcv, ver 1.0364buildbot # [ 0.861370] thunder_bgx, ver 1.0365buildbot # [ 0.861393] nicpf, ver 1.0366buildbot # [ 0.861937] e1000: Intel(R) PRO/1000 Network Driver367buildbot # [ 0.861944] e1000: Copyright (c) 1999-2006 Intel Corporation.368buildbot # [ 0.861973] e1000e: Intel(R) PRO/1000 Network Driver369buildbot # [ 0.861981] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.370buildbot # [ 0.862006] igb: Intel(R) Gigabit Ethernet Network Driver371buildbot # [ 0.862013] igb: Copyright (c) 2007-2014 Intel Corporation.372buildbot # [ 0.862040] igbvf: Intel(R) Gigabit Virtual Function Network Driver373buildbot # [ 0.862046] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.374buildbot # [ 0.862182] sky2: driver version 1.30375buildbot # [ 0.864236] ehci-pci 0000:00:0a.0: EHCI Host Controller376buildbot # [ 0.864263] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1377buildbot # [ 0.864522] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000378buildbot # [ 0.873913] usbcore: registered new interface driver usb-storage379buildbot # [ 0.874012] usbcore: registered new interface driver usbserial_generic380buildbot # [ 0.874027] usbserial: USB Serial support registered for generic381buildbot # [ 0.874626] hv_vmbus: registering driver hyperv_keyboard382buildbot # [ 0.878139] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00383buildbot # [ 0.878451] hub 1-0:1.0: USB hub found384buildbot # [ 0.878471] hub 1-0:1.0: 6 ports detected385buildbot # [ 0.880794] rtc-pl031 9010000.pl031: registered as rtc0386buildbot # [ 0.880817] rtc-pl031 9010000.pl031: setting system clock to 2026-08-23T03:04:44 UTC (1787454284)387buildbot # [ 0.881129] i2c_dev: i2c /dev entries driver388buildbot # [ 0.886089] sdhci: Secure Digital Host Controller Interface driver389buildbot # [ 0.886102] sdhci: Copyright(c) Pierre Ossman390buildbot # [ 0.886370] Synopsys Designware Multimedia Card Interface Driver391buildbot # [ 0.886740] sdhci-pltfm: SDHCI platform and OF driver helper392buildbot # [ 0.891161] hid: raw HID events driver (C) Jiri Kosina393buildbot # [ 0.891402] usbcore: registered new interface driver usbhid394buildbot # [ 0.891408] usbhid: USB HID core driver395buildbot # [ 0.894302] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available396buildbot # [ 0.896964] drop_monitor: Initializing network drop monitor service397buildbot # [ 0.897134] NET: Registered PF_INET6 protocol family398buildbot # [ 0.899314] Segment Routing with IPv6399buildbot # [ 0.899333] In-situ OAM (IOAM) with IPv6400buildbot # [ 0.899363] NET: Registered PF_PACKET protocol family401buildbot # [ 0.901234] 9pnet: Installing 9P2000 support402buildbot # [ 0.903279] Key type dns_resolver registered403buildbot # [ 0.910331] registered taskstats version 1404buildbot # [ 0.910514] Loading compiled-in X.509 certificates405buildbot # [ 0.918942] Demotion targets for Node 0: null406buildbot # [ 0.919041] Key type .fscrypt registered407buildbot # [ 0.919048] Key type fscrypt-provisioning registered408buildbot # [ 0.919143] ima: No TPM chip found, activating TPM-bypass!409buildbot # [ 0.919162] ima: Allocated hash algorithm: sha1410buildbot # [ 0.919184] ima: No architecture policies found411buildbot # [ 0.923324] input: gpio-keys as /devices/platform/gpio-keys/input/input0412buildbot # [ 0.941133] clk: Disabling unused clocks413buildbot # [ 0.941159] PM: genpd: Disabling unused power domains414buildbot # [ 0.945364] Freeing unused kernel memory: 4736K415buildbot # [ 0.945549] Run /init as init process416buildbot # [ 0.961693] systemd[1]: Successfully made /usr/ read-only.417buildbot # [ 1.123623] usb 1-1: new high-speed USB device number 2 using ehci-pci418buildbot # [ 1.275849] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1419buildbot # [ 1.296515] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)420buildbot # [ 1.308671] systemd[1]: Detected virtualization qemu.421buildbot # [ 1.310650] systemd[1]: Detected architecture arm64.422buildbot # [ 1.312672] systemd[1]: Running in initrd.423buildbot # [ 1.315178] systemd[1]: Initializing machine ID from random generator.424buildbot # [ 1.318131] systemd[1]: Hostname set to <buildbot>.425buildbot # [ 1.375792] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0426buildbot # [ 1.483994] systemd[1]: bpf-restrict-fs: LSM BPF program attached427buildbot # [ 1.495612] usb 1-2: new high-speed USB device number 3 using ehci-pci428buildbot # [ 1.543053] systemd[1]: Queued start job for default target Initrd Default Target.429buildbot # [ 1.553403] systemd[1]: Created slice Slice /system/modprobe.430buildbot # [ 1.554325] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.431buildbot # [ 1.555378] systemd[1]: Expecting device /dev/disk/by-label/nixos...432buildbot # [ 1.556237] systemd[1]: Reached target Path Units.433buildbot # [ 1.556856] systemd[1]: Reached target Slice Units.434buildbot # [ 1.557474] systemd[1]: Reached target Swaps.435buildbot # [ 1.558032] systemd[1]: Reached target Timer Units.436buildbot # [ 1.558761] systemd[1]: Listening on D-Bus System Message Bus Socket.437buildbot # [ 1.559910] systemd[1]: Listening on Journal Socket (/dev/log).438buildbot # [ 1.560785] systemd[1]: Listening on Journal Sockets.439buildbot # [ 1.561531] systemd[1]: Listening on udev Control Socket.440buildbot # [ 1.562301] systemd[1]: Listening on udev Kernel Socket.441buildbot # [ 1.562972] systemd[1]: Reached target Socket Units.442buildbot # [ 1.564840] systemd[1]: Starting Create List of Static Device Nodes...443buildbot # [ 1.571086] systemd[1]: Starting Load Kernel Module 9pnet_virtio...444buildbot # [ 1.572101] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs445buildbot # [ 1.585200] systemd[1]: Mounting Kernel Configuration File System...446buildbot # [ 1.599758] systemd[1]: Starting Journal Service...447buildbot # [ 1.607826] systemd[1]: Starting Load Kernel Modules...448buildbot # [ 1.608609] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os449buildbot # [ 1.621610] systemd[1]: Starting Coldplug All udev Devices...450buildbot # [ 1.635867] systemd[1]: Finished Create List of Static Device Nodes.451buildbot # [ 1.636859] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.452buildbot # [ 1.649317] systemd[1]: Finished Load Kernel Module 9pnet_virtio.453buildbot # [ 1.649756] systemd[1]: Mounted Kernel Configuration File System.454buildbot # [ 1.654485] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...455buildbot # [ 1.665705] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2456buildbot # [ 1.665844] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0457buildbot # [ 1.673202] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.458buildbot # [ 1.676837] systemd-journald[73]: Collecting audit messages is disabled.459buildbot # [ 1.677766] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev460buildbot # [ 1.691667] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0461buildbot # [ 1.691915] [drm] features: -virgl +edid -resource_blob -host_visible462buildbot # [ 1.691925] [drm] features: -context_init463buildbot # [ 1.692605] [drm] number of scanouts: 1464buildbot # [ 1.692623] [drm] number of cap sets: 0465buildbot # [ 1.707891] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic466buildbot # [ 1.707907] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0467buildbot # [ 1.720138] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.468buildbot # [ 1.722436] systemd[1]: Starting Create Static Device Nodes in /dev...469buildbot # [ 1.739820] Console: switching to colour frame buffer device 160x50470buildbot # [ 1.745982] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device471buildbot # [ 1.768095] systemd[1]: Finished Load Kernel Modules.472buildbot # [ 1.770985] systemd[1]: Starting Apply Kernel Variables...473buildbot # [ 1.784341] systemd[1]: Finished Create Static Device Nodes in /dev.474buildbot # [ 1.786190] systemd[1]: Reached target Preparation for Local File Systems.475buildbot # [ 1.786230] systemd[1]: Reached target Local File Systems.476buildbot # [ 1.791965] systemd[1]: Starting Rule-based Manager for Device Events and Files...477buildbot # [ 1.824194] systemd[1]: Finished Apply Kernel Variables.478buildbot # [ 1.840484] systemd-modules-load[74]: Inserted module 'dm_mod'479buildbot # [ 1.857097] systemd[1]: Started Journal Service.480buildbot # [ 1.851800] systemd-modules-load[74]: Module 'virtio_balloon' is built in481buildbot # [ 1.853163] systemd-modules-load[74]: Module 'virtio_console' is built in482buildbot # [ 1.854228] systemd-modules-load[74]: Inserted module 'virtio_gpu'483buildbot # [ 1.855223] systemd-modules-load[74]: Module 'virtio_rng' is built in484buildbot # [ 1.872410] systemd[1]: Starting Create System Files and Directories...485buildbot # [ 1.873755] systemd-udevd[81]: Using default interface naming scheme 'v261'.486buildbot # [ 1.892545] systemd[1]: Finished Create System Files and Directories.487buildbot # [ 1.911250] systemd[1]: Started Rule-based Manager for Device Events and Files.488buildbot # [ 1.980131] systemd[1]: Starting Virtual Console Setup...489buildbot # [ 2.049405] systemd-vconsole-setup[103]: Configuration of first virtual console was skipped, ignoring remaining ones.490buildbot # [ 2.054653] systemd[1]: Finished Virtual Console Setup.491buildbot # [ 2.639899] systemd[1]: Finished Coldplug All udev Devices.492buildbot # [ 2.641340] systemd[1]: Reached target System Initialization.493buildbot # [ 2.644374] systemd[1]: Reached target Basic System.494buildbot # [ 2.783249] (udev-worker)[97]: Network interface NamePolicy= disabled on kernel command line.495buildbot # [ 2.811088] (udev-worker)[99]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.496buildbot # [ 2.816105] (udev-worker)[99]: Network interface NamePolicy= disabled on kernel command line.497buildbot # [ 2.889752] systemd[1]: Found device /dev/disk/by-label/nixos.498buildbot # [ 2.899536] systemd[1]: Reached target Initrd Root Device.499buildbot # [ 2.904093] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...500buildbot # [ 2.945818] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks501buildbot # [ 2.954042] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.502buildbot # [ 2.963463] systemd[1]: Mounting /sysroot...503buildbot # [ 3.006911] EXT4-fs (vda): mounted filesystem b05578a2-9bb1-4433-9eb5-0cd199048814 r/w with ordered data mode. Quota mode: none.504buildbot # [ 2.999010] systemd[1]: Mounted /sysroot.505buildbot # [ 3.000856] systemd[1]: Reached target Initrd Root File System.506buildbot # [ 3.002820] systemd[1]: Starting Mountpoints Configured in the Real Root...507buildbot # [ 3.027552] systemd-sysroot-fstab-check[120]: /sysroot should be mounted in the initrd, will request daemon-reload.508buildbot # [ 3.034798] systemd[1]: Reload requested from client PID 120 ('systemd-sysroot') (unit initrd-parse-etc.service)...509buildbot # [ 3.037745] systemd[1]: Reloading...510buildbot # [ 3.239396] systemd[1]: Reloading finished in 206 ms.511buildbot # [ 3.276372] systemd-sysroot-fstab-check[120]: Requesting initrd-fs.target/start/replace...512buildbot # [ 3.280481] systemd-sysroot-fstab-check[120]: Requesting swap.target/start/replace...513buildbot # [ 3.286330] systemd[1]: Starting Load Kernel Module 9pnet_virtio...514buildbot # [ 3.288796] systemd[1]: initrd-parse-etc.service: Deactivated successfully.515buildbot # [ 3.297986] systemd[1]: Finished Mountpoints Configured in the Real Root.516buildbot # [ 3.299025] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.517buildbot # [ 3.320409] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.518buildbot # [ 3.321880] systemd[1]: Finished Load Kernel Module 9pnet_virtio.519buildbot # [ 3.610326] systemd[1]: Mounting /sysroot/nix/.ro-store...520buildbot # [ 3.619958] systemd[1]: Mounting /sysroot/nix/.rw-store...521buildbot # [ 3.630950] systemd[1]: Mounting /sysroot/run...522buildbot # [ 3.648106] systemd[1]: Mounting /sysroot/tmp/shared...523buildbot # [ 3.690001] systemd[1]: Mounting /sysroot/tmp/xchg...524buildbot # [ 3.706013] systemd[1]: Mounted /sysroot/nix/.ro-store.525buildbot # [ 3.714531] systemd[1]: Mounted /sysroot/nix/.rw-store.526buildbot # [ 3.715633] systemd[1]: Mounted /sysroot/run.527buildbot # [ 3.730248] systemd[1]: Mounted /sysroot/tmp/shared.528buildbot # [ 3.737635] systemd[1]: Starting rw-sysroot-nix-store.service...529buildbot # [ 3.747743] systemd[1]: Mounted /sysroot/tmp/xchg.530buildbot # [ 3.769945] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.531buildbot # [ 3.771051] systemd[1]: Finished rw-sysroot-nix-store.service.532buildbot # [ 3.772323] systemd[1]: Mounting /sysroot/nix/store...533buildbot # [ 3.814641] systemd[1]: Mounted /sysroot/nix/store.534buildbot # [ 3.816452] systemd[1]: Reached target Initrd File Systems.535buildbot # [ 3.817657] systemd[1]: Starting Find NixOS closure...536buildbot # [ 3.829774] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...537buildbot # [ 3.859099] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.538buildbot # [ 3.872760] systemd[1]: Finished Find NixOS closure.539buildbot # [ 3.875317] systemd[1]: Reached target Initrd Default Target.540buildbot # [ 3.880264] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...541buildbot # [ 3.906267] systemd[1]: Stopped target Initrd Default Target.542buildbot # [ 3.909958] systemd[1]: Stopped target Basic System.543buildbot # [ 3.911038] systemd[1]: Stopped target Initrd Root Device.544buildbot # [ 3.916118] systemd[1]: Stopped target Path Units.545buildbot # [ 3.917939] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.546buildbot # [ 3.919652] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.547buildbot # [ 3.923428] systemd[1]: Stopped target Slice Units.548buildbot # [ 3.928232] systemd[1]: Stopped target Socket Units.549buildbot # [ 3.929006] systemd[1]: Stopped target System Initialization.550buildbot # [ 3.929809] systemd[1]: Stopped target Swaps.551buildbot # [ 3.930451] systemd[1]: Stopped target Timer Units.552buildbot # [ 3.931143] systemd[1]: dbus.socket: Deactivated successfully.553buildbot # [ 3.931944] systemd[1]: Closed D-Bus System Message Bus Socket.554buildbot # [ 3.941552] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.555buildbot # [ 3.942629] systemd[1]: Stopped Find NixOS closure.556buildbot # [ 3.943316] systemd[1]: Starting Load Kernel Module 9pnet_virtio...557buildbot # [ 3.949304] systemd[1]: Starting rw-sysroot-nix-store.service...558buildbot # [ 3.953048] systemd[1]: systemd-sysctl.service: Deactivated successfully.559buildbot # [ 3.965853] systemd[1]: Stopped Apply Kernel Variables.560buildbot # [ 3.966736] systemd[1]: systemd-modules-load.service: Deactivated successfully.561buildbot # [ 3.969885] systemd[1]: Stopped Load Kernel Modules.562buildbot # [ 3.975445] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.563buildbot # [ 3.981435] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.564buildbot # [ 3.983304] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.565buildbot # [ 3.988939] systemd[1]: Stopped Create System Files and Directories.566buildbot # [ 3.989845] systemd[1]: Stopped target Local File Systems.567buildbot # [ 3.990648] systemd[1]: Stopped target Preparation for Local File Systems.568buildbot # [ 3.991585] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.569buildbot # [ 3.994026] systemd[1]: Stopped Coldplug All udev Devices.570buildbot # [ 3.994835] systemd[1]: Stopping Rule-based Manager for Device Events and Files...571buildbot # [ 3.995873] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.572buildbot # [ 3.997103] systemd[1]: Stopped Virtual Console Setup.573buildbot # [ 3.997847] systemd[1]: initrd-cleanup.service: Deactivated successfully.574buildbot # [ 3.998784] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.575buildbot # [ 3.999690] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.576buildbot # [ 4.008256] systemd[1]: Finished Load Kernel Module 9pnet_virtio.577buildbot # [ 4.009276] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.578buildbot # [ 4.010812] systemd[1]: Finished rw-sysroot-nix-store.service.579buildbot # [ 4.011742] systemd[1]: systemd-udevd.service: Deactivated successfully.580buildbot # [ 4.013129] systemd[1]: Stopped Rule-based Manager for Device Events and Files.581buildbot # [ 4.014130] systemd[1]: systemd-udevd.service: Consumed 1.115s CPU time over 2.226s wall clock time, 17.5M memory peak.582buildbot # [ 4.015530] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.583buildbot # [ 4.020281] systemd[1]: Closed udev Control Socket.584buildbot # [ 4.021246] systemd[1]: Starting Cleanup udev Database...585buildbot # [ 4.024344] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.586buildbot # [ 4.025598] systemd[1]: Stopped Create Static Device Nodes in /dev.587buildbot # [ 4.028201] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.588buildbot # [ 4.032166] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.589buildbot # [ 4.033181] systemd[1]: kmod-static-nodes.service: Deactivated successfully.590buildbot # [ 4.034146] systemd[1]: Stopped Create List of Static Device Nodes.591buildbot # [ 4.056441] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.592buildbot # [ 4.060786] systemd[1]: Finished Cleanup udev Database.593buildbot # [ 4.061635] systemd[1]: Reached target Switch Root.594buildbot # [ 4.062347] systemd[1]: Starting NixOS Activation...595buildbot # [ 4.225011] initrd-nixos-activation-start[173]: booting system configuration /nix/store/pm6cmivnagnsrpj64m2vbdk9kz73n8vi-nixos-system-buildbot-test596buildbot # [ 4.287679] initrd-nixos-activation-start[173]: running activation script...597buildbot # [ 4.700746] initrd-nixos-activation-start[196]: setting up /etc...598buildbot # [ 4.966723] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.599buildbot # [ 4.969462] systemd[1]: Finished NixOS Activation.600buildbot # [ 4.970640] systemd[1]: Starting Switch Root...601buildbot # [ 4.991297] systemd[1]: Switching root.602buildbot # [ 5.183033] systemd-journald[73]: Received SIGTERM from PID 1 (systemd).603buildbot # [ 5.787100] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)604buildbot # [ 5.800469] systemd[1]: Detected virtualization qemu.605buildbot # [ 5.804307] systemd[1]: Detected architecture arm64.606buildbot # [ 5.806392] systemd[1]: Detected first boot.607buildbot # [ 5.813181] systemd[1]: Initializing machine ID from random generator.608buildbot # [ 6.003964] systemd[1]: bpf-restrict-fs: LSM BPF program attached609buildbot # [ 6.145952] NET: Registered PF_VSOCK protocol family610buildbot # [ 6.153173] Guest personality initialized and is inactive611buildbot # [ 6.154196] VMCI host device registered (name=vmci, major=10, minor=261)612buildbot # [ 6.154221] Initialized host personality613buildbot # [ 6.218827] systemd[1]: Applying preset policy.614buildbot # [ 6.711404] systemd[1]: Populated /etc with preset unit settings.615buildbot # [ 7.214449] systemd[1]: initrd-switch-root.service: Deactivated successfully.616buildbot # [ 7.216345] systemd[1]: Stopped initrd-switch-root.service.617buildbot # [ 7.219405] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.618buildbot # [ 7.223348] systemd[1]: Created slice Slice /system/getty.619buildbot # [ 7.225437] systemd[1]: Created slice User and Session Slice.620buildbot # [ 7.226690] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.621buildbot # [ 7.228664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.622buildbot # [ 7.231266] systemd[1]: Expecting device /dev/hvc0...623buildbot # [ 7.232325] systemd[1]: Expecting device /dev/ttyAMA0...624buildbot # [ 7.233862] systemd[1]: Reached target Local Encrypted Volumes.625buildbot # [ 7.236364] systemd[1]: Stopped target initrd-fs.target.626buildbot # [ 7.237408] systemd[1]: Stopped target initrd-root-fs.target.627buildbot # [ 7.238987] systemd[1]: Stopped target initrd-switch-root.target.628buildbot # [ 7.241443] systemd[1]: Reached target Virtual Machines and Containers.629buildbot # [ 7.242632] systemd[1]: Reached target Path Units.630buildbot # [ 7.244143] systemd[1]: Reached target Remote File Systems.631buildbot # [ 7.246449] systemd[1]: Reached target Slice Units.632buildbot # [ 7.247432] systemd[1]: Reached target Swaps.633buildbot # [ 7.252533] systemd[1]: Listening on Query the User Interactively for a Password.634buildbot # [ 7.257275] systemd[1]: Listening on Process Core Dump Socket.635buildbot # [ 7.261151] systemd[1]: Listening on Credential Encryption/Decryption.636buildbot # [ 7.265055] systemd[1]: Listening on Factory Reset Management.637buildbot # [ 7.266273] systemd[1]: Listening on Hostname Service Socket.638buildbot # [ 7.272418] systemd[1]: Starting Journal Log Access Socket...639buildbot # [ 7.274002] systemd[1]: Listening on Journal Audit Socket.640buildbot # [ 7.278098] systemd[1]: Listening on Console Output Muting Service Socket.641buildbot # [ 7.279651] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.642buildbot # [ 7.281489] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os643buildbot # [ 7.284235] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki644buildbot # [ 7.295171] systemd[1]: Listening on Disk Repartitioning Service Socket.645buildbot # [ 7.296662] systemd[1]: Listening on udev Control Socket.646buildbot # [ 7.298205] systemd[1]: Listening on udev Varlink Socket.647buildbot # [ 7.302422] systemd[1]: Mounting Huge Pages File System...648buildbot # [ 7.306463] systemd[1]: Mounting POSIX Message Queue File System...649buildbot # [ 7.316619] systemd[1]: Mounting Kernel Debug File System...650buildbot # [ 7.326880] systemd[1]: Mounting Kernel Trace File System...651buildbot # [ 7.335896] systemd[1]: Starting Create List of Static Device Nodes...652buildbot # [ 7.347086] systemd[1]: Starting Load Kernel Module 9pnet_virtio...653buildbot # [ 7.348412] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs654buildbot # [ 7.365730] systemd[1]: Mounting Kernel Configuration File System...655buildbot # [ 7.367996] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm656buildbot # [ 7.370483] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore657buildbot # [ 7.388773] systemd[1]: Starting Load Kernel Module fuse...658buildbot # [ 7.390183] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67659buildbot # [ 7.453884] systemd[1]: Starting Journal Service...660buildbot # [ 7.495186] systemd[1]: Starting Load Kernel Modules...661buildbot # [ 7.523468] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...662buildbot # [ 7.557880] systemd-journald[269]: Collecting audit messages is enabled.663buildbot # [ 7.566455] fuse: init (API version 7.45)664buildbot # [ 7.567434] systemd[1]: Starting Remount Root and Kernel File Systems...665buildbot # [ 7.567856] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os666buildbot # [ 7.561972] systemd[1]: Queued start job for default target Multi-User System.667buildbot # [ 7.579516] systemd[1]: Starting Coldplug All udev Devices...668buildbot # [ 7.567067] systemd[1]: systemd-journald.service: Deactivated successfully.669buildbot # [ 7.612988] systemd[1]: Started Journal Service.670buildbot # [ 7.604153] systemd-modules-load[271]: Module 'atkbd' is built in671buildbot # [ 7.609918] systemd-modules-load[271]: Module 'loop' is built in672buildbot # [ 7.615977] systemd[1]: Listening on Journal Log Access Socket.673buildbot # [ 7.625288] systemd[1]: Mounted Huge Pages File System.674buildbot # [ 7.626093] systemd[1]: Mounted POSIX Message Queue File System.675buildbot # [ 7.626934] systemd[1]: Mounted Kernel Debug File System.676buildbot # [ 7.627696] systemd[1]: Mounted Kernel Trace File System.677buildbot # [ 7.639323] systemd[1]: Finished Create List of Static Device Nodes.678buildbot # [ 7.645815] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.679buildbot # [ 7.653018] systemd[1]: Finished Load Kernel Module 9pnet_virtio.680buildbot # [ 7.657468] systemd[1]: Mounted Kernel Configuration File System.681buildbot # [ 7.658563] systemd[1]: modprobe@fuse.service: Deactivated successfully.682buildbot # [ 7.672205] systemd[1]: Finished Load Kernel Module fuse.683buildbot # [ 7.673024] systemd-modules-load[271]: Inserted module 'tls'684buildbot # [ 7.673835] systemd[1]: Finished Load Kernel Modules.685buildbot # [ 7.677892] systemd[1]: Mounting FUSE Control File System...686buildbot # [ 7.686530] systemd[1]: Starting Apply Kernel Variables...687buildbot # [ 7.718025] EXT4-fs (vda): re-mounted b05578a2-9bb1-4433-9eb5-0cd199048814.688buildbot # [ 7.706494] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...689buildbot # [ 7.728818] systemd-oomd[272]: No swap; memory pressure usage will be degraded690buildbot # [ 7.741415] systemd[1]: Finished Remount Root and Kernel File Systems.691buildbot # [ 7.744362] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.692buildbot # [ 7.749115] systemd[1]: Listening on Disk Image Download Service Socket.693buildbot # [ 7.753744] systemd[1]: Starting Flush Journal to Persistent Storage...694buildbot # [ 7.759333] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore695buildbot # [ 7.774026] systemd[1]: Starting Load/Save OS Random Seed...696buildbot # [ 7.778579] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os697buildbot # [ 7.836678] systemd[1]: Mounted FUSE Control File System.698buildbot # [ 7.856989] systemd-journald[269]: Received client request to flush runtime journal.699buildbot # [ 7.896753] systemd[1]: Finished Apply Kernel Variables.700buildbot # [ 7.901782] systemd[1]: Finished Load/Save OS Random Seed.701buildbot # [ 7.908219] systemd[1]: Reached target First Boot Complete.702buildbot # [ 7.911081] systemd[1]: Finished Flush Journal to Persistent Storage.703buildbot # [ 7.916292] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.704buildbot # [ 7.918070] systemd[1]: Starting Create Static Device Nodes in /dev...705buildbot # [ 8.002102] systemd[1]: Finished Create Static Device Nodes in /dev.706buildbot # [ 8.003102] systemd[1]: Reached target Preparation for Local File Systems.707buildbot # [ 8.008305] systemd[1]: Starting Rule-based Manager for Device Events and Files...708buildbot # [ 8.182812] systemd-udevd[302]: Using default interface naming scheme 'v261'.709buildbot # [ 8.206360] systemd[1]: Mounting /run/wrappers...710buildbot # [ 8.250464] systemd[1]: Mounted /run/wrappers.711buildbot # [ 8.253699] systemd[1]: Reached target Local File Systems.712buildbot # [ 8.257490] systemd[1]: Listening on Boot Loader Control Service Socket.713buildbot # [ 8.263598] systemd[1]: Starting register-nix-paths.service...714buildbot # [ 8.276960] systemd[1]: Starting Create SUID/SGID Wrappers...715buildbot # [ 8.280260] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.716buildbot # [ 8.285604] systemd[1]: Starting Save Transient machine-id to Disk...717buildbot # [ 8.303554] systemd[1]: Starting Create System Files and Directories...718buildbot # [ 8.423708] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.719buildbot # [ 8.432066] systemd[1]: Finished Save Transient machine-id to Disk.720buildbot # [ 8.455898] systemd[1]: Started Rule-based Manager for Device Events and Files.721buildbot # [ 8.492159] systemd[1]: Finished Create System Files and Directories.722buildbot # [ 8.502226] systemd[1]: Starting Rebuild Journal Catalog...723buildbot # [ 8.516159] systemd[1]: Starting Record System Boot/Shutdown in UTMP...724buildbot # [ 8.630799] systemd[1]: Finished Record System Boot/Shutdown in UTMP.725buildbot # [ 8.699542] systemd[1]: Finished Rebuild Journal Catalog.726buildbot # [ 8.706379] systemd[1]: Starting Update is Completed...727buildbot # [ 8.781289] systemd[1]: Finished Update is Completed.728buildbot # [ 9.335160] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.729buildbot # [ 9.336845] systemd[1]: Finished Create SUID/SGID Wrappers.730buildbot # [ 9.491791] systemd[1]: Finished Coldplug All udev Devices.731buildbot # [ 9.548811] systemd[1]: Finished register-nix-paths.service.732buildbot # [ 9.550913] systemd[1]: Reached target System Initialization.733buildbot # [ 9.552931] systemd[1]: Started Discard unused filesystem blocks once a week.734buildbot # [ 9.556483] systemd[1]: Started Daily Cleanup of Temporary Directories.735buildbot # [ 9.560747] systemd[1]: Reached target Timer Units.736buildbot # [ 9.562680] systemd[1]: Listening on D-Bus System Message Bus Socket.737buildbot # [ 9.567675] systemd[1]: Listening on Nix Daemon Socket.738buildbot # [ 9.569196] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).739buildbot # [ 9.571829] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.740buildbot # [ 9.576473] systemd[1]: Reached target Socket Units.741buildbot # [ 9.579531] systemd[1]: Reached target Basic System.742buildbot # [ 9.582104] systemd[1]: Starting Import lastlog data into lastlog2 database...743buildbot # [ 9.588742] systemd[1]: Starting Name Service Cache Daemon (nsncd)...744buildbot # [ 9.590646] systemd[1]: Starting Post-Boot Actions...745buildbot # [ 9.605037] systemd[1]: Started Reset console on configuration changes.746buildbot # [ 9.630495] systemd[1]: Starting resolvconf update...747buildbot # [ 9.633173] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.748buildbot # [ 9.656873] systemd[1]: Starting D-Bus System Message Bus...749buildbot # [ 9.700674] systemd[1]: Finished Post-Boot Actions.750buildbot # [ 9.720982] nsncd[390]: Aug 23 03:04:53.355 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"751buildbot # [ 9.729913] systemd[1]: Started Name Service Cache Daemon (nsncd).752buildbot # [ 9.736874] systemd[1]: Reached target Host and Network Name Lookups.753buildbot # [ 9.741265] systemd[1]: Reached target User and Group Name Lookups.754buildbot # [ 9.757446] systemd[1]: Starting User Login Management...755buildbot # [ 9.784898] systemd[1]: Finished Import lastlog data into lastlog2 database.756buildbot # [ 9.891702] dbus-broker-launch[395]: Looking up NSS user entry for 'systemd-timesync'...757buildbot # [ 9.908631] systemd-logind[411]: New seat seat0.758buildbot # [ 9.913953] dbus-broker-launch[395]: NSS returned no entry for 'systemd-timesync'759buildbot # [ 9.920749] dbus-broker-launch[395]: Invalid user-name in /nix/store/l3igxwzcw7qzfq2f6lci1x15924cyxpj-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"760buildbot # [ 9.931247] systemd[1]: Started User Login Management.761buildbot # [ 9.935742] systemd[1]: Starting linger-users.service...762buildbot # [ 9.958227] systemd[1]: Started D-Bus System Message Bus.763buildbot # [ 10.016456] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3764buildbot # [ 10.005050] dbus-broker-launch[395]: Ready765buildbot # [ 10.022348] systemd[1]: linger-users.service: Deactivated successfully.766buildbot # [ 10.024410] systemd[1]: Finished linger-users.service.767buildbot # [ 10.033741] systemd[1]: Stopped target Host and Network Name Lookups.768buildbot # [ 10.036689] systemd[1]: Stopping Host and Network Name Lookups...769buildbot # [ 10.037652] systemd[1]: Stopped target User and Group Name Lookups.770buildbot # [ 10.038539] systemd[1]: Stopping User and Group Name Lookups...771buildbot # [ 10.039367] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...772buildbot # [ 10.048207] systemd[1]: nscd.service: Deactivated successfully.773buildbot # [ 10.053662] systemd[1]: Stopped Name Service Cache Daemon (nsncd).774buildbot # [ 10.062574] systemd[1]: Starting Name Service Cache Daemon (nsncd)...775buildbot # [ 10.123046] nsncd[465]: Aug 23 03:04:53.756 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"776buildbot # [ 10.130756] systemd[1]: Started Name Service Cache Daemon (nsncd).777buildbot # [ 10.131824] systemd[1]: Reached target Host and Network Name Lookups.778buildbot # [ 10.135657] systemd[1]: Reached target User and Group Name Lookups.779buildbot # [ 10.162471] systemd[1]: Finished resolvconf update.780buildbot # [ 10.167952] systemd[1]: Reached target Preparation for Network.781buildbot # [ 10.172891] systemd[1]: Starting DHCP Client...782buildbot # [ 10.184000] systemd[1]: Starting Extra networking commands....783buildbot # [ 10.397148] dhcpcd[493]: dhcpcd-10.3.2 starting784buildbot # [ 10.413228] dhcpcd[523]: dev: loaded udev785buildbot # [ 10.420085] dhcpcd[523]: no valid interfaces found786buildbot # [ 10.422021] dhcpcd[523]: no valid interfaces found787buildbot # [ 10.478036] systemd[1]: Finished Extra networking commands..788buildbot # [ 10.483132] systemd[1]: Reached target Network.789buildbot # [ 10.488462] systemd[1]: Starting Nginx Web Server...790buildbot # [ 10.496319] systemd[1]: Starting PostgreSQL Server...791buildbot # [ 10.504879] systemd[1]: Starting SSH Daemon...792buildbot # [ 10.527920] systemd[1]: Starting Permit User Sessions...793buildbot # [ 10.620948] systemd[1]: Finished Permit User Sessions.794buildbot # [ 10.639499] systemd[1]: Started Getty on tty1.795buildbot # [ 10.640454] systemd[1]: Reached target Login Prompts.796buildbot # [ 10.690935] sshd[545]: Server listening on 0.0.0.0 port 22.797buildbot # [ 10.695748] systemd[1]: Started SSH Daemon.798buildbot # [ 10.699731] sshd[545]: Server listening on :: port 22.799buildbot # [ 10.708797] systemd[1]: Starting Setup git test repository...800buildbot # [ 10.770958] systemd[1]: Starting Virtual Console Setup...801buildbot # [ 10.836229] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.802buildbot # [ 10.842408] systemd[1]: Stopped Virtual Console Setup.803buildbot # [ 10.859507] systemd[1]: Starting Virtual Console Setup...804buildbot # [ 10.893807] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs805buildbot # [ 10.951773] setup-git-repo-start[566]: hint: Using 'master' as the name for the initial branch. This default branch name806buildbot # [ 10.964556] setup-git-repo-start[566]: hint: will change to "main" in Git 3.0. To configure the initial branch name807buildbot # [ 10.972374] setup-git-repo-start[566]: hint: to use in all of your new repositories, which will suppress this warning,808buildbot # [ 10.981330] setup-git-repo-start[566]: hint: call:809buildbot # [ 10.988889] setup-git-repo-start[566]: hint:810buildbot # [ 10.993829] setup-git-repo-start[566]: hint: git config --global init.defaultBranch <name>811buildbot # [ 10.998133] setup-git-repo-start[566]: hint:812buildbot # [ 11.002717] setup-git-repo-start[566]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and813buildbot # [ 11.008768] setup-git-repo-start[566]: hint: 'development'. The just-created branch can be renamed via this command:814buildbot # [ 11.017459] setup-git-repo-start[566]: hint:815buildbot # [ 11.021591] setup-git-repo-start[566]: hint: git branch -m <name>816buildbot # [ 11.029095] setup-git-repo-start[566]: hint:817buildbot # [ 11.033337] setup-git-repo-start[566]: hint: Disable this message with "git config set advice.defaultBranchName false"818buildbot # [ 11.040340] setup-git-repo-start[566]: Initialized empty Git repository in /srv/repos/test-flake.git/819buildbot # [ 11.046653] systemd[1]: Started Nginx Web Server.820buildbot # [ 11.053047] nginx-pre-start[559]: nginx: the configuration file /nix/store/q9lawikvsas3xr3g2zsgsiw9h7mnkf8z-nginx.conf syntax is ok821buildbot # [ 11.061117] nginx-pre-start[559]: nginx: configuration file /nix/store/q9lawikvsas3xr3g2zsgsiw9h7mnkf8z-nginx.conf test is successful822buildbot # [ 11.071351] postgresql-pre-start[561]: The files belonging to this database system will be owned by user "postgres".823buildbot # [ 11.080300] postgresql-pre-start[561]: This user must also own the server process.824buildbot # [ 11.086052] postgresql-pre-start[561]: The database cluster will be initialized with locale "en_US.UTF-8".825buildbot # [ 11.093671] postgresql-pre-start[561]: The default database encoding has accordingly been set to "UTF8".826buildbot # [ 11.099854] postgresql-pre-start[561]: The default text search configuration will be set to "english".827buildbot # [ 11.104907] postgresql-pre-start[561]: Data page checksums are enabled.828buildbot # [ 11.111813] postgresql-pre-start[561]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok829buildbot # [ 11.120062] postgresql-pre-start[561]: creating subdirectories ... ok830buildbot # [ 11.125816] postgresql-pre-start[561]: selecting dynamic shared memory implementation ... posix831buildbot # [ 11.134562] setup-git-repo-start[572]: hint: Using 'master' as the name for the initial branch. This default branch name832buildbot # [ 11.141534] setup-git-repo-start[572]: hint: will change to "main" in Git 3.0. To configure the initial branch name833buildbot # [ 11.149825] setup-git-repo-start[572]: hint: to use in all of your new repositories, which will suppress this warning,834buildbot # [ 11.159029] setup-git-repo-start[572]: hint: call:835buildbot # [ 11.165194] setup-git-repo-start[572]: hint:836buildbot # [ 11.167705] setup-git-repo-start[572]: hint: git config --global init.defaultBranch <name>837buildbot # [ 11.171284] setup-git-repo-start[572]: hint:838buildbot # [ 11.177462] setup-git-repo-start[572]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and839buildbot # [ 11.184535] setup-git-repo-start[572]: hint: 'development'. The just-created branch can be renamed via this command:840buildbot # [ 11.191455] setup-git-repo-start[572]: hint:841buildbot # [ 11.197211] setup-git-repo-start[572]: hint: git branch -m <name>842buildbot # [ 11.203781] setup-git-repo-start[572]: hint:843buildbot # [ 11.205536] setup-git-repo-start[572]: hint: Disable this message with "git config set advice.defaultBranchName false"844buildbot # [ 11.212820] setup-git-repo-start[572]: Initialized empty Git repository in /tmp/test-flake/.git/845buildbot # [ 11.319707] postgresql-pre-start[561]: selecting default "max_connections" ... 100846buildbot # [ 11.327612] setup-git-repo-start[582]: warning: you don't have Internet access; disabling some network-dependent features847buildbot # [ 11.433603] setup-git-repo-start[595]: [master (root-commit) 49a8c13] Initial commit848buildbot # [ 11.440197] setup-git-repo-start[595]: 1 file changed, 39 insertions(+)849buildbot # [ 11.443099] setup-git-repo-start[595]: create mode 100644 flake.nix850buildbot # [ 11.530079] postgresql-pre-start[561]: selecting default "shared_buffers" ... 128MB851buildbot # [ 11.599853] setup-git-repo-start[604]: To /srv/repos/test-flake.git852buildbot # [ 11.605074] setup-git-repo-start[604]: * [new branch] master -> master853buildbot # [ 11.609207] setup-git-repo-start[604]: branch 'master' set up to track 'origin/master'.854buildbot # [ 11.681203] systemd-vconsole-setup[568]: Configuration of first virtual console was skipped, ignoring remaining ones.855buildbot # [ 11.691331] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.856buildbot # [ 11.696972] systemd[1]: Finished Virtual Console Setup.857buildbot # [ 11.756484] setup-git-repo-start[615]: warning: you don't have Internet access; disabling some network-dependent features858buildbot # [ 11.763653] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.859buildbot # [ 11.770904] systemd[1]: Started backdoor.service.860buildbot # [ 11.879511] 8021q: 802.1Q VLAN Support v1.8861buildbot # connecting to host...862buildbot: Guest shell says: b'Spawning backdoor root shell...\n'863buildbot: connected to guest root shell864buildbot # [ 11.975533] setup-git-repo-start[615]: this derivation will be built:865buildbot: (connecting took 12.32 seconds)866buildbot: (finished: waiting for the VM to finish booting, in 12.75 seconds)867buildbot # [ 11.980109] setup-git-repo-start[615]: /nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv868buildbot # [ 12.033849] (udev-worker)[598]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.869buildbot # [ 12.041709] (udev-worker)[598]: Network interface NamePolicy= disabled on kernel command line.870buildbot # [ 12.067020] cfg80211: Loading compiled-in X.509 certificates for regulatory database871buildbot # [ 12.076698] (udev-worker)[596]: Network interface NamePolicy= disabled on kernel command line.872buildbot # [ 12.115043] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'873buildbot # [ 12.115511] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'874buildbot # [ 12.120184] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2875buildbot # [ 12.120543] cfg80211: failed to load regulatory.db876buildbot: (finished: waiting for unit sshd.service, in 12.92 seconds)877buildbot: waiting for unit setup-git-repo.service878buildbot # [ 12.294480] setup-git-repo-start[615]: building '/nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv'...879buildbot # [ 12.345417] systemd[1]: Finished Setup git test repository.880buildbot # [ 12.363107] systemd[1]: Condition check resulted in Virtio network device being skipped.881buildbot # [ 12.372898] systemd[1]: Starting Address configuration of eth1...882buildbot # [ 12.478072] 8021q: adding VLAN 0 to HW filter on device eth0883buildbot # [ 12.466753] dhcpcd[523]: eth0: waiting for carrier884buildbot # [ 12.468776] dhcpcd[523]: eth0: carrier acquired885buildbot # [ 12.487206] dhcpcd[523]: DUID 00:01:00:01:32:1d:1f:d8:52:54:00:12:34:56886buildbot # [ 12.490090] dhcpcd[523]: eth0: IAID 00:12:34:56887buildbot # [ 12.491938] dhcpcd[523]: eth0: adding address fe80::5054:ff:fe12:3456[ 12.509770] 8021q: adding VLAN 0 to HW filter on device eth1888buildbot # 889buildbot # [ 12.513743] network-addresses-eth1-start[652]: adding address 192.168.1.1/24... done890buildbot # [ 12.528253] network-addresses-eth1-start[652]: adding address 2001:db8:1::1/64... done891buildbot # [ 12.550535] systemd[1]: Finished Address configuration of eth1.892buildbot # [ 12.582566] systemd-logind[411]: Watching system buttons on /dev/input/event0 (gpio-keys)893buildbot # [ 12.705785] mousedev: PS/2 mouse device common for all mice894buildbot # [ 12.884365] systemd-logind[411]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)895buildbot: (finished: waiting for unit setup-git-repo.service, in 1.20 seconds)896buildbot: waiting for unit multi-user.target897buildbot # [ 13.479808] dhcpcd[523]: eth0: soliciting a DHCP lease898buildbot # [ 13.486162] dhcpcd[523]: eth0: offered 10.0.2.15 from 10.0.2.2899buildbot # [ 13.492216] dhcpcd[523]: eth0: probing address 10.0.2.15/24900buildbot # [ 14.573040] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.901buildbot # [ 14.576255] systemd[1]: Stopped Virtual Console Setup.902buildbot # [ 14.583225] systemd[1]: Stopping Virtual Console Setup...903buildbot # [ 14.591351] systemd[1]: Starting Virtual Console Setup...904buildbot # [ 14.645553] dhcpcd[523]: eth0: soliciting an IPv6 router905buildbot # [ 14.646405] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.906buildbot # [ 14.647508] dhcpcd[523]: eth0: Router Advertisement from fe80::2907buildbot # [ 14.654775] dhcpcd[523]: eth0: adding address fec0::5054:ff:fe12:3456/64908buildbot # [ 14.655731] dhcpcd[523]: eth0: adding route to fec0::/64909buildbot # [ 14.661072] dhcpcd[523]: eth0: adding default route via fe80::2910buildbot # [ 14.664139] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.911buildbot # [ 14.667814] systemd[1]: Stopped Virtual Console Setup.912buildbot # [ 14.693026] systemd[1]: Starting Virtual Console Setup...913buildbot # [ 14.700209] postgresql-pre-start[561]: selecting default time zone ... UTC914buildbot # [ 14.710927] postgresql-pre-start[561]: creating configuration files ... ok915buildbot # [ 14.767433] systemd-logind[411]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)916buildbot # [ 15.074347] postgresql-pre-start[561]: running bootstrap script ... ok917buildbot # [ 15.124669] systemd-vconsole-setup[706]: Configuration of first virtual console was skipped, ignoring remaining ones.918buildbot # [ 15.134325] systemd[1]: Finished Virtual Console Setup.919buildbot # [ 15.688089] postgresql-pre-start[561]: performing post-bootstrap initialization ... ok920buildbot # [ 15.868994] postgresql-pre-start[561]: syncing data to disk ... ok921buildbot # [ 15.870971] postgresql-pre-start[561]: initdb: warning: enabling "trust" authentication for local connections922buildbot # [ 15.872536] postgresql-pre-start[561]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.923buildbot # [ 15.874604] postgresql-pre-start[561]: Success. You can now start the database server using:924buildbot # [ 15.875784] postgresql-pre-start[561]: pg_ctl -D /var/lib/postgresql/18 -l logfile start925buildbot # [ 15.997140] postgres[728]: [728] LOG: starting PostgreSQL 18.6 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit926buildbot # [ 16.009135] postgres[728]: [728] LOG: listening on IPv6 address "::1", port 5432927buildbot # [ 16.010370] postgres[728]: [728] LOG: listening on IPv4 address "127.0.0.1", port 5432928buildbot # [ 16.012248] postgres[728]: [728] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"929buildbot # [ 16.024431] postgres[737]: [737] LOG: database system was shut down at 2026-08-23 03:04:59 GMT930buildbot # [ 16.030965] postgres[728]: [728] LOG: database system is ready to accept connections931buildbot # [ 16.035598] systemd[1]: Started PostgreSQL Server.932buildbot # [ 16.044376] systemd[1]: Starting PostgreSQL Setup Scripts...933buildbot # [ 16.268797] postgresql-setup-start[748]: CREATE DATABASE934buildbot # [ 16.318049] postgresql-setup-start[753]: CREATE ROLE935buildbot # [ 16.341963] postgresql-setup-start[755]: ALTER DATABASE936buildbot # [ 16.349111] systemd[1]: Finished PostgreSQL Setup Scripts.937buildbot # [ 16.351269] systemd[1]: Reached target PostgreSQL.938buildbot # [ 16.355630] systemd[1]: Starting Buildbot Continuous Integration Server....939buildbot # [ 16.409376] buildbot-master-pre-start[760]: mkdir: created directory '/var/lib/buildbot/master'940buildbot # [ 19.272794] dhcpcd[523]: eth0: leased 10.0.2.15 for 86400 seconds941buildbot # [ 19.273383] dhcpcd[523]: eth0: adding route to 10.0.2.0/24942buildbot # [ 19.273438] dhcpcd[523]: eth0: adding default route via 10.0.2.2943buildbot # [ 19.432265] systemd[1]: Started DHCP Client.944buildbot # [ 22.164940] buildbot-master-pre-start[762]: updating existing installation945buildbot # [ 22.168150] buildbot-master-pre-start[762]: not touching existing buildbot.tac946buildbot # [ 22.169215] buildbot-master-pre-start[762]: creating buildbot.tac.new instead947buildbot # [ 22.170163] buildbot-master-pre-start[762]: creating /var/lib/buildbot/master/master.cfg.sample948buildbot # [ 22.171318] buildbot-master-pre-start[762]: creating database (postgresql://@/buildbot)949buildbot # [ 22.176264] buildbot-master-pre-start[762]: buildmaster configured in /var/lib/buildbot/master950buildbot # [ 22.650851] systemd[1]: Started Buildbot Continuous Integration Server..951buildbot # [ 22.659971] systemd[1]: Started Buildbot Worker..952buildbot # [ 22.663106] systemd[1]: Reached target Multi-User System.953buildbot # [ 22.663945] systemd[1]: Startup finished in 934ms (kernel) + 4.360s (initrd) + 17.367s (userspace) = 22.662s.954buildbot: (finished: waiting for unit multi-user.target, in 10.18 seconds)955subtest: Master and worker services start956buildbot: waiting for unit buildbot-master.service957buildbot: (finished: waiting for unit buildbot-master.service, in 0.12 seconds)958buildbot: waiting for unit buildbot-worker.service959buildbot: (finished: waiting for unit buildbot-worker.service, in 0.11 seconds)960buildbot: waiting for TCP port 8010 on localhost961buildbot # [ 24.572441] twistd[885]: Starting worker local-worker-000962buildbot # [ 24.572581] twistd[885]: 2026-08-23T03:05:07+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...963buildbot # [ 24.577583] twistd[885]: 2026-08-23T03:05:08+0000 [-] Loaded.964buildbot # [ 24.579234] twistd[885]: 2026-08-23T03:05:08+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin/python3.14 3.14.7) starting up.965buildbot # [ 24.582800] twistd[885]: 2026-08-23T03:05:08+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.966buildbot # [ 24.586879] twistd[885]: 2026-08-23T03:05:08+0000 [-] Starting Worker -- version: 2026.08.23967buildbot # [ 24.588761] twistd[885]: 2026-08-23T03:05:08+0000 [-] recording hostname in twistd.hostname968buildbot # [ 24.590208] twistd[885]: 2026-08-23T03:05:08+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf58a10070050>969buildbot # [ 24.597046] twistd[885]: 2026-08-23T03:05:08+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xf58a10070590> in 2.365101367540579 seconds.970buildbot # [ 24.599775] twistd[885]: 2026-08-23T03:05:08+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xf58a10070050>971buildbot # [ 26.502634] twistd[884]: 2026-08-23T03:05:07+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...972buildbot # [ 26.504791] twistd[884]: 2026-08-23T03:05:10+0000 [-] Loaded.973buildbot # [ 26.504885] twistd[884]: 2026-08-23T03:05:10+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin/python3.14 3.14.7) starting up.974buildbot # [ 26.504920] twistd[884]: 2026-08-23T03:05:10+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.975buildbot # [ 26.504954] twistd[884]: 2026-08-23T03:05:10+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0976buildbot # [ 26.514362] twistd[884]: 2026-08-23T03:05:10+0000 [-] Loading configuration from '/nix/store/bkmrh6bpq4lngjrpcsvkbw040v32fp9j-master.cfg'977buildbot # [ 26.966119] twistd[885]: 2026-08-23T03:05:10+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf58a10070050>978buildbot # [ 26.971724] twistd[885]: 2026-08-23T03:05:10+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xf58a10070590> in 3.200074374465415 seconds.979buildbot # [ 26.975481] twistd[885]: 2026-08-23T03:05:10+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xf58a10070050>980buildbot # [ 27.405691] twistd[884]: 2026-08-23T03:05:11+0000 [-] Setting up database with URL 'postgresql://@/buildbot'981buildbot # [ 27.516859] twistd[884]: 2026-08-23T03:05:11+0000 [-] adding 9 new builders, removing 0982buildbot # [ 27.736164] twistd[884]: 2026-08-23T03:05:11+0000 [-] adding 3 new services, removing 0983buildbot # [ 27.924615] twistd[884]: 2026-08-23T03:05:11+0000 [-] adding 1 new change_sources, removing 0984buildbot # [ 27.931712] twistd[884]: 2026-08-23T03:05:11+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'985buildbot # [ 27.940344] twistd[884]: 2026-08-23T03:05:11+0000 [-] adding 14 new schedulers, removing 0986buildbot # [ 28.165343] twistd[884]: 2026-08-23T03:05:11+0000 [-] BuildbotSite starting on 8010987buildbot # [ 28.167698] twistd[884]: 2026-08-23T03:05:11+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0xeb12b83ecc20>988buildbot # [ 28.170795] twistd[884]: 2026-08-23T03:05:11+0000 [-] adding 5 new workers, removing 0989buildbot # [ 28.181061] twistd[884]: 2026-08-23T03:05:11+0000 [-] PBServerFactory starting on 9989990buildbot # [ 28.183503] twistd[884]: 2026-08-23T03:05:11+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0xeb12b83ed6a0>991buildbot # [ 28.208530] twistd[884]: 2026-08-23T03:05:11+0000 [-] Starting Worker -- version: 2026.08.23992buildbot # [ 28.210511] twistd[884]: 2026-08-23T03:05:11+0000 [-] recording hostname in twistd.hostname993buildbot # [ 28.212067] twistd[884]: 2026-08-23T03:05:11+0000 [-] message from master: attached994buildbot # [ 28.213883] twistd[884]: 2026-08-23T03:05:11+0000 [-] Got workerinfo from '__Janitor'995buildbot # [ 28.224126] twistd[884]: 2026-08-23T03:05:11+0000 [-] bot attached996buildbot # [ 28.226586] twistd[884]: 2026-08-23T03:05:11+0000 [-] Worker __Janitor attached to __Janitor997buildbot # [ 28.229408] twistd[884]: 2026-08-23T03:05:11+0000 [-] message from master: attached998buildbot # [ 28.277669] sshd-session[948]: Accepted publickey for root from ::1 port 57752 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8999buildbot # [ 28.301017] sshd-session[948]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1000buildbot # [ 28.305976] twistd[884]: 2026-08-23T03:05:11+0000 [-] BuildMaster is running1001buildbot # [ 28.350980] systemd[1]: Created slice Slice /user/0.1002buildbot # [ 28.356208] systemd[1]: Starting User Runtime Directory /run/user/0...1003buildbot # [ 28.389131] systemd-logind[411]: New session '1' of user 'root' with class 'user' and type 'tty'.1004buildbot # [ 28.404906] systemd[1]: Finished User Runtime Directory /run/user/0.1005buildbot # [ 28.410616] systemd[1]: Starting User Manager for UID 0...1006buildbot # [ 28.450830] (systemd)[954]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1007buildbot # [ 28.456883] systemd-logind[411]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1008buildbot # [ 28.558951] systemd[954]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1009buildbot # [ 28.815859] systemd[954]: Queued start job for default target Main User Target.1010buildbot # [ 28.820963] systemd[954]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1011buildbot # [ 28.824644] systemd[954]: Created slice User Application Slice.1012buildbot # [ 28.825562] systemd[954]: Started Daily Cleanup of User's Temporary Directories.1013buildbot # [ 28.826550] systemd[954]: Reached target Paths.1014buildbot # [ 28.827189] systemd[954]: Reached target Timers.1015buildbot # [ 28.829467] systemd[954]: Starting D-Bus User Message Bus Socket...1016buildbot # [ 28.836792] systemd[954]: Starting Create User Files and Directories...1017buildbot # [ 28.913791] systemd[954]: Finished Create User Files and Directories.1018buildbot # [ 28.979148] systemd[954]: Listening on D-Bus User Message Bus Socket.1019buildbot # [ 28.983802] systemd[954]: Reached target Sockets.1020buildbot # [ 28.984794] systemd[954]: Reached target Basic System.1021buildbot # [ 28.985569] systemd[954]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1022buildbot # [ 28.986985] systemd[954]: Reached target Main User Target.1023buildbot # [ 28.987796] systemd[954]: Startup finished in 501ms.1024buildbot # [ 28.990310] systemd[1]: Started User Manager for UID 0.1025buildbot # [ 28.991125] systemd[1]: Started Session 1 of User root.1026buildbot # [ 29.025923] sshd-session[968]: Received disconnect from ::1 port 57752:11: disconnected by user1027buildbot # [ 29.028104] sshd-session[968]: Disconnected from user root ::1 port 577521028buildbot # [ 29.029194] sshd-session[948]: pam_unix(sshd:session): session closed for user root1029buildbot # [ 29.041610] systemd[1]: session-1.scope: Deactivated successfully.1030buildbot # [ 29.042537] systemd-logind[411]: Session 1 logged out. Waiting for processes to exit.1031buildbot # [ 29.050293] systemd-logind[411]: Removed session 1.1032buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1033buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.37 seconds)1034??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1035 File "/nix/store/fj3hhjjdra1gp3haf9l1g8ms70afp8c9-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391036buildbot: waiting for success: curl --fail --head http://localhost:80101037??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1038 File "/nix/store/fj3hhjjdra1gp3haf9l1g8ms70afp8c9-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391039buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1040buildbot # Dload Upload Total Spent Left Speed1041buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01042buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.10 seconds)1043(finished: subtest: Master and worker services start, in 5.69 seconds)1044buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1045buildbot # [ 29.268325] sshd-session[977]: Accepted publickey for root from ::1 port 57756 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81046buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1047buildbot # Dload Upload Total Spent Left Speed1048buildbot # [ 29.287771] sshd-session[977]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1049buildbot # 0 0 0 0 0 0 0 0 0[ 29.303972] systemd-logind[411]: New session '3' of user 'root' with class 'user' and type 'tty'.1050buildbot # [ 29.310420] systemd[1]: Started Session 3 of User root.1051buildbot # 100 266 100 266 0 0 6592 0 0100 266 100 266 0 0 5758 0 0100 266 100 266 0 0 5213 0 01052buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.12 seconds)1053subtest: Wait for poller to initialize1054buildbot: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from"1055buildbot # [ 29.371151] sshd-session[988]: Received disconnect from ::1 port 57756:11: disconnected by user1056buildbot # [ 29.373800] sshd-session[988]: Disconnected from user root ::1 port 577561057buildbot # [ 29.377783] sshd-session[977]: pam_unix(sshd:session): session closed for user root1058buildbot # [ 29.380478] systemd[1]: session-3.scope: Deactivated successfully.1059buildbot # [ 29.386747] systemd-logind[411]: Session 3 logged out. Waiting for processes to exit.1060buildbot # [ 29.389604] systemd-logind[411]: Removed session 3.1061buildbot # [ 29.425282] twistd[884]: 2026-08-23T03:05:13+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1062buildbot # [ 30.178265] twistd[885]: 2026-08-23T03:05:13+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf58a10070050>1063buildbot # [ 30.197434] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=52774)1064buildbot # [ 30.207356] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1065buildbot # [ 30.220925] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1066buildbot # [ 30.248276] twistd[884]: 2026-08-23T03:05:13+0000 [-] bot attached1067buildbot # [ 30.253527] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1068buildbot # [ 30.264342] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1069buildbot # [ 30.267541] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1070buildbot # [ 30.279245] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1071buildbot # [ 30.292149] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1072buildbot # [ 30.294572] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1073buildbot # [ 30.329476] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1074buildbot # [ 30.331178] twistd[884]: 2026-08-23T03:05:13+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1075buildbot # [ 30.370548] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1076buildbot # [ 30.371754] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1077buildbot # [ 30.387772] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1078buildbot # [ 30.399556] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1079buildbot # [ 30.405640] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1080buildbot # [ 30.406837] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1081buildbot # [ 30.407975] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1082buildbot # [ 30.429873] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] message from master: attached1083buildbot # [ 30.439332] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] Connected to buildmaster; worker is ready1084buildbot # [ 30.451864] twistd[885]: 2026-08-23T03:05:13+0000 [Broker,client] sending application-level keepalives every 600 seconds1085buildbot: (finished: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from", in 1.16 seconds)1086(finished: subtest: Wait for poller to initialize, in 1.16 seconds)1087subtest: Push new commit to trigger poller1088buildbot: must succeed: 1089 cd /tmp/test-flake1090 echo '# Updated at test time' >> flake.nix1091 git add flake.nix1092 git commit -m 'Test commit to trigger poller'1093 git push origin master1094 1095buildbot # Enumerating objects: 5, done.1096buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1097buildbot # Compressing objects: 50% (1/2)Compressing objects: 100% (2/2)Compressing objects: 100% (2/2), done.1098buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 302 bytes | 151.00 KiB/s, done.1099buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)1100buildbot # To /srv/repos/test-flake.git1101buildbot # 49a8c13..ab2ea51 master -> master1102buildbot: (finished: must succeed: 1103 cd /tmp/test-flake1104 echo '# Updated at test time' >> flake.nix1105 git add flake.nix1106 git commit -m 'Test commit to trigger poller'1107 git push origin master1108 , in 0.12 seconds)1109(finished: subtest: Push new commit to trigger poller, in 0.12 seconds)1110subtest: Poller triggers builds and verifies results1111??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1112 File "/nix/store/fj3hhjjdra1gp3haf9l1g8ms70afp8c9-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281113buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1114buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1115buildbot # Dload Upload Total Spent Left Speed1116buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3203 0 0100 51 100 51 0 0 2771 0 0100 51 100 51 0 0 2425 0 01117buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1118buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1119buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1120buildbot # Dload Upload Total Spent Left Speed1121buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3851 0 0100 51 100 51 0 0 2874 0 0100 51 100 51 0 0 2329 0 01122buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1123buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1124buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1125buildbot # Dload Upload Total Spent Left Speed1126buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2606 0 0100 51 100 51 0 0 2052 0 0100 51 100 51 0 0 1783 0 01127buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1128buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1129buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1130buildbot # Dload Upload Total Spent Left Speed1131buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2413 0 0100 51 100 51 0 0 1879 0 0100 51 100 51 0 0 1591 0 01132buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1133buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1134buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1135buildbot # Dload Upload Total Spent Left Speed1136buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3554 0 0100 51 100 51 0 0 2707 0 0100 51 100 51 0 0 2249 0 01137buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1138buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1139buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1140buildbot # Dload Upload Total Spent Left Speed1141buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2602 0 0100 51 100 51 0 0 2170 0 0100 51 100 51 0 0 1779 0 01142buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1143buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1144buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1145buildbot # Dload Upload Total Spent Left Speed1146buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2639 0 0100 51 100 51 0 0 2189 0 0100 51 100 51 0 0 1894 0 01147buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1148buildbot # [ 38.201895] sshd-session[1060]: Accepted publickey for root from ::1 port 35320 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81149buildbot # [ 38.225486] sshd-session[1060]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1150buildbot # [ 38.241767] systemd-logind[411]: New session '4' of user 'root' with class 'user' and type 'tty'.1151buildbot # [ 38.249265] systemd[1]: Started Session 4 of User root.1152buildbot # [ 38.290744] sshd-session[1063]: Received disconnect from ::1 port 35320:11: disconnected by user1153buildbot # [ 38.293926] sshd-session[1063]: Disconnected from user root ::1 port 353201154buildbot # [ 38.296800] sshd-session[1060]: pam_unix(sshd:session): session closed for user root1155buildbot # [ 38.313592] systemd[1]: session-4.scope: Deactivated successfully.1156buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1157buildbot # [ 38.319962] systemd-logind[411]: Session 4 logged out. Waiting for processes to exit.1158buildbot # [ 38.322963] systemd-logind[411]: Removed session 4.1159buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1160buildbot # Dload Upload Total Spent Left Speed1161buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1771 0 0100 51 100 51 0 0 1628 0 0100 51 100 51 0 0 1492 0 01162buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1163buildbot # [ 38.537505] sshd-session[1071]: Accepted publickey for root from ::1 port 35334 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81164buildbot # [ 38.557204] sshd-session[1071]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1165buildbot # [ 38.570817] systemd-logind[411]: New session '5' of user 'root' with class 'user' and type 'tty'.1166buildbot # [ 38.576489] systemd[1]: Started Session 5 of User root.1167buildbot # [ 38.632958] sshd-session[1074]: Received disconnect from ::1 port 35334:11: disconnected by user1168buildbot # [ 38.635529] sshd-session[1074]: Disconnected from user root ::1 port 353341169buildbot # [ 38.638813] sshd-session[1071]: pam_unix(sshd:session): session closed for user root1170buildbot # [ 38.647040] systemd[1]: session-5.scope: Deactivated successfully.1171buildbot # [ 38.649136] systemd-logind[411]: Session 5 logged out. Waiting for processes to exit.1172buildbot # [ 38.653299] systemd-logind[411]: Removed session 5.1173buildbot # [ 38.688705] twistd[884]: 2026-08-23T03:05:22+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1174buildbot # [ 38.746214] twistd[884]: 2026-08-23T03:05:22+0000 [-] gitpoller: processing 1 changes: ['ab2ea518d6622d843f0eae97d69ede3d64496054'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1175buildbot # [ 38.864130] twistd[884]: 2026-08-23T03:05:22+0000 [-] added change with revision ab2ea518d6622d843f0eae97d69ede3d64496054 to database1176buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1177buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1178buildbot # Dload Upload Total Spent Left Speed1179buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2160 0 0100 51 100 51 0 0 1833 0 0100 51 100 51 0 0 1586 0 01180buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1181buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1182buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1183buildbot # Dload Upload Total Spent Left Speed1184buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3126 0 0100 51 100 51 0 0 2364 0 0100 51 100 51 0 0 1965 0 01185buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1186buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1187buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1188buildbot # Dload Upload Total Spent Left Speed1189buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2226 0 0100 51 100 51 0 0 1777 0 0100 51 100 51 0 0 1521 0 01190buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1191buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1192buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1193buildbot # Dload Upload Total Spent Left Speed1194buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4449 0 0100 51 100 51 0 0 3257 0 0100 51 100 51 0 0 2607 0 01195buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1196buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1197buildbot # [ 43.967528] twistd[884]: 2026-08-23T03:05:27+0000 [-] added buildset 1 to database1198buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1199buildbot # Dload Upload Total Spent Left Speed1200buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3337 0 0100 51 100 51 0 0 2761 0 0100 51 100 51 0 0 2376 0 01201buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1202buildbot # [ 44.133574] twistd[884]: 2026-08-23T03:05:27+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1203buildbot # [ 44.141817] twistd[884]: 2026-08-23T03:05:27+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1204buildbot # [ 44.224251] twistd[884]: 2026-08-23T03:05:27+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1205buildbot # [ 44.229751] twistd[884]: 2026-08-23T03:05:27+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1206buildbot # [ 44.235776] twistd[884]: 2026-08-23T03:05:27+0000 [-] sending ping1207buildbot # [ 44.238278] twistd[884]: 2026-08-23T03:05:27+0000 [Broker,0,127.0.0.1] ping finished: success1208buildbot # [ 44.242586] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] message from master: ping1209buildbot # [ 44.265684] twistd[884]: 2026-08-23T03:05:27+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1210buildbot # [ 44.272293] twistd[884]: 2026-08-23T03:05:27+0000 [-] command '['git', '--version']' in dir 'build'1211buildbot # [ 44.273633] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command 0): startCommand:shell1212buildbot # [ 44.274826] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1213buildbot # [ 44.283316] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command ['git', '--version']): git --version1214buildbot # [ 44.285283] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1215buildbot # [ 44.287562] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1216buildbot # [ 44.289363] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1217buildbot # [ 44.291144] twistd[885]: 2026-08-23T03:05:27+0000 [Broker,client] (command ['git', '--version']): using PTY: False1218buildbot # [ 44.303021] twistd[885]: 2026-08-23T03:05:27+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0309341219buildbot # [ 44.305002] twistd[885]: 2026-08-23T03:05:27+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a100727b0>1220buildbot # [ 44.325956] twistd[884]: 2026-08-23T03:05:27+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01221buildbot # [ 44.365736] twistd[884]: 2026-08-23T03:05:27+0000 [-] <RemoteCommand 'stat' at 258465631897312>: RemoteCommand.run [1]1222buildbot # [ 44.373272] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 1): startCommand:stat1223buildbot # [ 44.374462] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1224buildbot # [ 44.380852] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf58a107afb60>1225buildbot # [ 44.384361] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 258465631897312> rc=21226buildbot # [ 44.392347] twistd[884]: 2026-08-23T03:05:28+0000 [-] <RemoteCommand 'mkdir' at 258465631500112>: RemoteCommand.run [2]1227buildbot # [ 44.421120] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 2): startCommand:mkdir1228buildbot # [ 44.422401] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0xf58a10071010>1229buildbot # [ 44.427698] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 258465631500112> rc=01230buildbot # [ 44.432320] twistd[884]: 2026-08-23T03:05:28+0000 [-] <RemoteCommand 'downloadFile' at 258465631501072>: RemoteCommand.run [3]1231buildbot # [ 44.469070] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 3): startCommand:downloadFile1232buildbot # [ 44.475594] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0xf58a10070d70>1233buildbot # [ 44.483156] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 258465631501072> rc=01234buildbot # [ 44.489713] twistd[884]: 2026-08-23T03:05:28+0000 [-] <RemoteCommand 'listdir' at 258465631501392>: RemoteCommand.run [4]1235buildbot # [ 44.517626] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 4): startCommand:listdir1236buildbot # [ 44.519790] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xf58a10070c20>1237buildbot # [ 44.528876] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 258465631501392> rc=01238buildbot # [ 44.537063] twistd[884]: 2026-08-23T03:05:28+0000 [-] No git repo present, making full clone1239buildbot # [ 44.539102] twistd[884]: 2026-08-23T03:05:28+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1240buildbot # [ 44.546551] twistd[884]: 2026-08-23T03:05:28+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1241buildbot # [ 44.569642] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 5): startCommand:shell1242buildbot # [ 44.576553] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1243buildbot # [ 44.598298] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1244buildbot # [ 44.620100] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1245buildbot # [ 44.627161] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1246buildbot # [ 44.633461] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1247buildbot # [ 44.643201] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1248buildbot # [ 44.848567] sshd-session[1110]: Accepted publickey for root from ::1 port 50466 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81249buildbot # [ 44.867417] sshd-session[1110]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1250buildbot # [ 44.883068] systemd-logind[411]: New session '6' of user 'root' with class 'user' and type 'tty'.1251buildbot # [ 44.889527] systemd[1]: Started Session 6 of User root.1252buildbot # [ 44.956659] sshd-session[1113]: Received disconnect from ::1 port 50466:11: disconnected by user1253buildbot # [ 44.958819] sshd-session[1113]: Disconnected from user root ::1 port 504661254buildbot # [ 44.960321] sshd-session[1110]: pam_unix(sshd:session): session closed for user root1255buildbot # [ 44.966162] systemd-logind[411]: Session 6 logged out. Waiting for processes to exit.1256buildbot # [ 44.969164] systemd[1]: session-6.scope: Deactivated successfully.1257buildbot # [ 44.971949] systemd-logind[411]: Removed session 6.1258buildbot # [ 44.987756] twistd[885]: 2026-08-23T03:05:28+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.4136331259buildbot # [ 44.999644] twistd[885]: 2026-08-23T03:05:28+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a107096d0>1260buildbot # [ 45.006903] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01261buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1262buildbot # [ 45.023943] twistd[884]: 2026-08-23T03:05:28+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']'>: RemoteCommand.run [6]1263buildbot # [ 45.029736] twistd[884]: 2026-08-23T03:05:28+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']' in dir 'build'1264buildbot # [ 45.043642] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 6): startCommand:shell1265buildbot # [ 45.048395] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): RunProcess._startCommand1266buildbot # [ 45.056331] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f ab2ea518d6622d843f0eae97d69ede3d644960541267buildbot # [ 45.063693] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1268buildbot # [ 45.070795] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): watching logfiles {}1269buildbot # [ 45.074974] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'ab2ea518d6622d843f0eae97d69ede3d64496054']1270buildbot # [ 45.082094] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): using PTY: False1271buildbot # [ 45.099501] twistd[885]: 2026-08-23T03:05:28+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']): command finished with signal None, exit code 0, elapsedTime: 0.0546111272buildbot # [ 45.106454] twistd[885]: 2026-08-23T03:05:28+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a1070a990>1273buildbot # [ 45.115804] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'ab2ea518d6622d843f0eae97d69ede3d64496054']'> rc=01274buildbot # [ 45.139460] twistd[884]: 2026-08-23T03:05:28+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1275buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1276buildbot # [ 45.155962] twistd[884]: 2026-08-23T03:05:28+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1277buildbot # [ 45.158954] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command 7): startCommand:shell1278buildbot # Dload Upload Total Spent Left Speed1279buildbot # 0 0 0 0 0 0 0 0 0[ 45.167899] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1280buildbot # 100 401 100 401 0 0 10652[ 45.178043] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1281buildbot # 0 0100 401 100 401 0 0 8410 0 [ 45.190468] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1282buildbot # 0100 401 100 401 0 0 6816 0 01283buildbot # [ 45.201520] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1284buildbot # [ 45.205613] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1285buildbot # [ 45.211227] twistd[885]: 2026-08-23T03:05:28+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1286buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds)1287buildbot # [ 45.348243] twistd[885]: 2026-08-23T03:05:28+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1970401288buildbot # [ 45.357341] twistd[885]: 2026-08-23T03:05:28+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a1067a780>1289buildbot # [ 45.360093] twistd[884]: 2026-08-23T03:05:28+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01290buildbot # [ 45.379355] twistd[884]: 2026-08-23T03:05:29+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1291buildbot # [ 45.382486] twistd[884]: 2026-08-23T03:05:29+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1292buildbot # [ 45.397105] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command 8): startCommand:shell1293buildbot # [ 45.404097] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1294buildbot # [ 45.405683] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1295buildbot # [ 45.407066] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1296buildbot # [ 45.412169] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1297buildbot # [ 45.413996] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1298buildbot # [ 45.415814] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1299buildbot # [ 45.425752] twistd[885]: 2026-08-23T03:05:29+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0263131300buildbot # [ 45.428506] twistd[885]: 2026-08-23T03:05:29+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a1067a8b0>1301buildbot # [ 45.453899] twistd[884]: 2026-08-23T03:05:29+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01302buildbot # [ 45.474170] twistd[884]: 2026-08-23T03:05:29+0000 [-] Got Git revision ab2ea518d6622d843f0eae97d69ede3d644960541303buildbot # [ 45.475552] twistd[884]: 2026-08-23T03:05:29+0000 [-] <RemoteCommand 'rmdir' at 258465632092560>: RemoteCommand.run [9]1304buildbot # [ 45.502811] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command 9): startCommand:rmdir1305buildbot # [ 45.507645] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1306buildbot # [ 45.512835] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1307buildbot # [ 45.515869] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1308buildbot # [ 45.519173] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1309buildbot # [ 45.522187] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1310buildbot # [ 45.526146] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1311buildbot # [ 45.538125] twistd[885]: 2026-08-23T03:05:29+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0356961312buildbot # [ 45.541236] twistd[885]: 2026-08-23T03:05:29+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0xf58a10073380>1313buildbot # [ 45.558029] twistd[884]: 2026-08-23T03:05:29+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 258465632092560> rc=01314buildbot # [ 45.579666] twistd[884]: 2026-08-23T03:05:29+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1315buildbot # [ 45.604300] twistd[884]: 2026-08-23T03:05:29+0000 [-] step 'git' complete: success (None)1316buildbot # [ 45.611898] twistd[884]: 2026-08-23T03:05:29+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xeb12b911d7f0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xeb12b911eba0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xeb12b911eba0>)])1317buildbot # [ 45.632430] twistd[884]: 2026-08-23T03:05:29+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1318buildbot # [ 45.634527] twistd[884]: 2026-08-23T03:05:29+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1319buildbot # [ 45.642098] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command 10): startCommand:shell1320buildbot # [ 45.643317] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1321buildbot # [ 45.647776] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1322buildbot # [ 45.650935] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1323buildbot # [ 45.654141] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1324buildbot # [ 45.656632] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1325buildbot # [ 45.659470] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1326buildbot # [ 45.674919] twistd[885]: 2026-08-23T03:05:29+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0363671327buildbot # [ 45.677515] twistd[885]: 2026-08-23T03:05:29+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a1069ee70>1328buildbot # [ 45.685654] twistd[884]: 2026-08-23T03:05:29+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01329buildbot # [ 45.690790] twistd[884]: 2026-08-23T03:05:29+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1330buildbot # [ 45.695612] twistd[884]: 2026-08-23T03:05:29+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1331buildbot # [ 45.729227] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command 11): startCommand:shell1332buildbot # [ 45.732520] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1333buildbot # [ 45.742289] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1334buildbot # [ 45.750364] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1335buildbot # [ 45.756279] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1336buildbot # [ 45.761283] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1337buildbot # [ 45.770099] twistd[885]: 2026-08-23T03:05:29+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1338buildbot # [ 46.018301] systemd[1]: Started Nix Daemon.1339buildbot # [ 46.118341] nix-daemon[1157]: accepted connection from pid 1155, user buildbot-worker1340buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1341buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1342buildbot # Dload Upload Total Spent Left Speed1343buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14640 0 0100 401 100 401 0 0 13116 0 0100 401 100 401 0 0 11752 0 01344buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1345buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1346buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1347buildbot # Dload Upload Total Spent Left Speed1348buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 33039 0 0100 401 100 401 0 0 24434 0 0100 401 100 401 0 0 19686 0 01349buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1350buildbot # [ 48.203696] sshd-session[1174]: Accepted publickey for root from ::1 port 50478 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81351buildbot # [ 48.228395] sshd-session[1174]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1352buildbot # [ 48.246257] systemd-logind[411]: New session '7' of user 'root' with class 'user' and type 'tty'.1353buildbot # [ 48.253062] systemd[1]: Started Session 7 of User root.1354buildbot # [ 48.297780] sshd-session[1177]: Received disconnect from ::1 port 50478:11: disconnected by user1355buildbot # [ 48.300836] sshd-session[1177]: Disconnected from user root ::1 port 504781356buildbot # [ 48.305474] sshd-session[1174]: pam_unix(sshd:session): session closed for user root1357buildbot # [ 48.310423] systemd[1]: session-7.scope: Deactivated successfully.1358buildbot # [ 48.311720] systemd-logind[411]: Session 7 logged out. Waiting for processes to exit.1359buildbot # [ 48.326049] systemd-logind[411]: Removed session 7.1360buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1361buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1362buildbot # Dload Upload Total Spent Left Speed1363buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14737 0 0100 401 100 401 0 0 13498 0[ 48.523372] sshd-session[1182]: Accepted publickey for root from ::1 port 50488 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81364buildbot # 0100 401 100 401 0 0 9961 0 01365buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1366buildbot # [ 48.539768] sshd-session[1182]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1367buildbot # [ 48.548570] systemd-logind[411]: New session '8' of user 'root' with class 'user' and type 'tty'.1368buildbot # [ 48.556862] systemd[1]: Started Session 8 of User root.1369buildbot # [ 48.596916] sshd-session[1188]: Received disconnect from ::1 port 50488:11: disconnected by user1370buildbot # [ 48.598703] sshd-session[1188]: Disconnected from user root ::1 port 504881371buildbot # [ 48.599636] sshd-session[1182]: pam_unix(sshd:session): session closed for user root1372buildbot # [ 48.605167] systemd[1]: session-8.scope: Deactivated successfully.1373buildbot # [ 48.608448] systemd-logind[411]: Session 8 logged out. Waiting for processes to exit.1374buildbot # [ 48.611254] systemd-logind[411]: Removed session 8.1375buildbot # [ 48.618346] twistd[884]: 2026-08-23T03:05:32+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1376buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1377buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1378buildbot # Dload Upload Total Spent Left Speed1379buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 22919 0 0100 401 100 401 0 0 18540 0 0100 401 100 401 0 0 15792 0 01380buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1381buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1382buildbot # [ 50.713806] nix-daemon[1157]: accepted connection from pid 1201, user buildbot-worker1383buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1384buildbot # Dload Upload Total Spent Left Speed1385buildbot # 0 0 0 0 0 0 0 0 0[ 50.746353] nix-daemon[1157]: accepted connection from pid 1155, user buildbot-worker1386buildbot # 100 401 100 401 0 0 11560 0 0100 401 100 401 0 0 9534 0 0100 401 100 401 0 0 6779 0 01387buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1388buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1389buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1390buildbot # Dload Upload Total Spent Left Speed1391buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 25421 0 0100 401 100 401 0 0 18143 0 0100 401 100 401 0 0 14612 0 01392buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1393buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1394buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1395buildbot # Dload Upload Total Spent Left Speed1396buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 26835 0 0100 401 100 401 0 0 20133 0 0100 401 100 401 0 0 16614 0 01397buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1398buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1399buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1400buildbot # Dload Upload Total Spent Left Speed1401buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 32855 0 0100 401 100 401 0 0 24379 0 0100 401 100 401 0 0 19638 0 01402buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1403buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1404buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1405buildbot # Dload Upload Total Spent Left Speed1406buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 29655 0 0100 401 100 401 0 0 22525 0 0100 401 100 401 0 0 18257 0 01407buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1408buildbot # [ 55.671543] twistd[885]: 2026-08-23T03:05:39+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 9.9381961409buildbot # [ 55.699913] twistd[885]: 2026-08-23T03:05:39+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a107fb8a0>1410buildbot # [ 55.711903] twistd[884]: 2026-08-23T03:05:39+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01411buildbot # [ 55.766810] twistd[884]: 2026-08-23T03:05:39+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xeb12b911d7f0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xeb12b911eba0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xeb12b911eba0>)]1412buildbot # [ 55.789750] twistd[884]: 2026-08-23T03:05:39+0000 [-] step 'Evaluate flake' complete: success (None)1413buildbot # [ 55.832668] twistd[884]: 2026-08-23T03:05:39+0000 [-] added buildset 2 to database1414buildbot # [ 55.865310] twistd[884]: 2026-08-23T03:05:39+0000 [-] added buildset 3 to database1415buildbot # [ 56.026641] twistd[884]: 2026-08-23T03:05:39+0000 [-] starting build <Build test-flake/nix-build number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=AVAILABLE>1416buildbot # [ 56.041228] twistd[884]: 2026-08-23T03:05:39+0000 [-] <Build test-flake/nix-build number:None results:success>.startBuild1417buildbot # [ 56.132903] twistd[884]: 2026-08-23T03:05:39+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1418buildbot # [ 56.138182] twistd[884]: 2026-08-23T03:05:39+0000 [-] starting build <Build test-flake/nix-build number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=BUILDING>1419buildbot # [ 56.142387] twistd[884]: 2026-08-23T03:05:39+0000 [-] sending ping1420buildbot # [ 56.144737] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] message from master: ping1421buildbot # [ 56.145946] twistd[884]: 2026-08-23T03:05:39+0000 [Broker,0,127.0.0.1] ping finished: success1422buildbot # [ 56.164064] twistd[884]: 2026-08-23T03:05:39+0000 [-] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']'>: RemoteCommand.run [12]1423buildbot # [ 56.167912] twistd[884]: 2026-08-23T03:05:39+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']' in dir 'build'1424buildbot # [ 56.183068] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command 12): startCommand:shell1425buildbot # [ 56.184695] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): RunProcess._startCommand1426buildbot # [ 56.188898] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.failing-test '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*'1427buildbot # [ 56.195067] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs)1428buildbot # [ 56.200055] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): watching logfiles {}1429buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1430buildbot # [ 56.203549] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.failing-test', b'/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']1431buildbot # [ 56.210031] twistd[885]: 2026-08-23T03:05:39+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): using PTY: False1432buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1433buildbot # Dload Upload Total Spent Left Speed1434buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 16308 0 0100 751 100 751 0 0 14597 0 0100 751 100 751 0 0 13937 0 01435buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1436buildbot # [ 56.327037] nix-daemon[1157]: accepted connection from pid 1225, user buildbot-worker1437buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1438buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1439buildbot # Dload Upload Total Spent Left Speed1440buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 60731 0 0100 751 100 751 0 0 44986 0 0100 751 100 751 0 0 36345 0 01441buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1442buildbot # [ 58.205795] sshd-session[1243]: Accepted publickey for root from ::1 port 42154 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81443buildbot # [ 58.230903] sshd-session[1243]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1444buildbot # [ 58.249256] systemd-logind[411]: New session '9' of user 'root' with class 'user' and type 'tty'.1445buildbot # [ 58.252979] systemd[1]: Started Session 9 of User root.1446buildbot # [ 58.295861] sshd-session[1246]: Received disconnect from ::1 port 42154:11: disconnected by user1447buildbot # [ 58.298759] sshd-session[1246]: Disconnected from user root ::1 port 421541448buildbot # [ 58.303035] sshd-session[1243]: pam_unix(sshd:session): session closed for user root1449buildbot # [ 58.314669] systemd[1]: session-9.scope: Deactivated successfully.1450buildbot # [ 58.315974] systemd-logind[411]: Session 9 logged out. Waiting for processes to exit.1451buildbot # [ 58.318617] systemd-logind[411]: Removed session 9.1452buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1453buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1454buildbot # Dload Upload Total Spent Left Speed1455buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 40002 0 0100 751 100 751 0 0 28598 0 0100 751 100 751 0 0 23838 0 01456buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1457buildbot # [ 58.528644] sshd-session[1251]: Accepted publickey for root from ::1 port 42162 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81458buildbot # [ 58.541221] sshd-session[1251]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1459buildbot # [ 58.551439] systemd-logind[411]: New session '10' of user 'root' with class 'user' and type 'tty'.1460buildbot # [ 58.556986] systemd[1]: Started Session 10 of User root.1461buildbot # [ 58.600804] sshd-session[1257]: Received disconnect from ::1 port 42162:11: disconnected by user1462buildbot # [ 58.602998] sshd-session[1257]: Disconnected from user root ::1 port 421621463buildbot # [ 58.605209] sshd-session[1251]: pam_unix(sshd:session): session closed for user root1464buildbot # [ 58.610677] systemd[1]: session-10.scope: Deactivated successfully.1465buildbot # [ 58.614961] systemd-logind[411]: Session 10 logged out. Waiting for processes to exit.1466buildbot # [ 58.618296] systemd-logind[411]: Removed session 10.1467buildbot # [ 58.630768] twistd[884]: 2026-08-23T03:05:42+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1468buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1469buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1470buildbot # Dload Upload Total Spent Left Speed1471buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 47226 0 0100 751 100 751 0 0 35629 0 0100 751 100 751 0 0 28620 0 01472buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1473buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1474buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1475buildbot # Dload Upload Total Spent Left Speed1476buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 53539 0 0100 751 100 751 0 0 39809 0 0100 751 100 751 0 0 32693 0 01477buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1478buildbot # [ 61.371446] twistd[885]: 2026-08-23T03:05:45+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): command finished with signal None, exit code 1, elapsedTime: 5.1964041479buildbot # [ 61.376547] twistd[885]: 2026-08-23T03:05:45+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a107fbf00>1480buildbot # [ 61.379399] twistd[884]: 2026-08-23T03:05:45+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']'> rc=11481buildbot # [ 61.404127] twistd[884]: 2026-08-23T03:05:45+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): []1482buildbot # [ 61.425044] twistd[884]: 2026-08-23T03:05:45+0000 [-] step 'Build flake attr' complete: failure (["'nix build ...' (failure)"])1483buildbot # [ 61.426586] twistd[884]: 2026-08-23T03:05:45+0000 [-] <Build test-flake/nix-build number:1 results:failure>: build finished1484buildbot # [ 61.452613] twistd[884]: 2026-08-23T03:05:45+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1485buildbot # [ 61.579772] twistd[884]: 2026-08-23T03:05:45+0000 [-] starting build <Build test-flake/nix-build number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=AVAILABLE>1486buildbot # [ 61.588664] twistd[884]: 2026-08-23T03:05:45+0000 [-] <Build test-flake/nix-build number:None results:success>.startBuild1487buildbot # [ 61.682882] twistd[884]: 2026-08-23T03:05:45+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1488buildbot # [ 61.687340] twistd[884]: 2026-08-23T03:05:45+0000 [-] starting build <Build test-flake/nix-build number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=BUILDING>1489buildbot # [ 61.691606] twistd[884]: 2026-08-23T03:05:45+0000 [-] sending ping1490buildbot # [ 61.693112] twistd[884]: 2026-08-23T03:05:45+0000 [Broker,0,127.0.0.1] ping finished: success1491buildbot # [ 61.695123] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] message from master: ping1492buildbot # [ 61.718104] twistd[884]: 2026-08-23T03:05:45+0000 [-] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']'>: RemoteCommand.run [13]1493buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1494buildbot # [ 61.728560] twistd[884]: 2026-08-23T03:05:45+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']' in dir 'build'1495buildbot # [ 61.731700] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command 13): startCommand:shell1496buildbot # [ 61.734774] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): RunProcess._startCommand1497buildbot # [ 61.741542] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.test '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*'1498buildbot # [ 61.747467] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs)1499buildbot # [ 61.752617] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): watching logfiles {}1500buildbot # [ 61.757391] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.test', b'/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']1501buildbot # [ 61.764749] twistd[885]: 2026-08-23T03:05:45+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): using PTY: False1502buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1503buildbot # Dload Upload Total Spent Left Speed1504buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 48882 0 0100 1120 100 1120 0 0 44125 0 0100 1120 100 1120 0 0 40361 0 01505buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1506buildbot # [ 61.861405] nix-daemon[1157]: accepted connection from pid 1283, user buildbot-worker1507buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1508buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1509buildbot # Dload Upload Total Spent Left Speed1510buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 53789 0 0100 1120 100 1120 0 0 44582 0 0100 1120 100 1120 0 0 39013 0 01511buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1512buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1513buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1514buildbot # Dload Upload Total Spent Left Speed1515buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 51703 0 0100 1120 100 1120 0 0 43980 0 0100 1120 100 1120 0 0 38567 0 01516buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1517buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1518buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1519buildbot # Dload Upload Total Spent Left Speed1520buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 74255 0 0100 1120 100 1120 0 0 58190 0 0100 1120 100 1120 0 0 48655 0 01521buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1522buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1523buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1524buildbot # Dload Upload Total Spent Left Speed1525buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 48535 0 0100 1120 100 1120 0 0 39185 0 0100 1120 100 1120 0 0 34263 0 01526buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1527buildbot # [ 67.041223] twistd[885]: 2026-08-23T03:05:50+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): command finished with signal None, exit code 0, elapsedTime: 5.3248621528buildbot # [ 67.046042] twistd[885]: 2026-08-23T03:05:50+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a106ab950>1529buildbot # [ 67.051657] twistd[884]: 2026-08-23T03:05:50+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']'> rc=01530buildbot # [ 67.076397] twistd[884]: 2026-08-23T03:05:50+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): []1531buildbot # [ 67.092287] twistd[884]: 2026-08-23T03:05:50+0000 [-] step 'Build flake attr' complete: success (None)1532buildbot # [ 67.119193] twistd[884]: 2026-08-23T03:05:50+0000 [-] added buildset 4 to database1533buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1534buildbot # [ 67.277981] twistd[884]: 2026-08-23T03:05:50+0000 [-] starting build <Build test-flake/nix-register-gcroot number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-register-gcroot' worker='local-worker-000' state=AVAILABLE>1535buildbot # [ 67.297109] twistd[884]: 2026-08-23T03:05:50+0000 [-] <Build test-flake/nix-register-gcroot number:None results:success>.startBuild1536buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1537buildbot # Dload Upload Total Spent Left Speed1538buildbot # 0 0 0 0 0 0 0 0 0100 1469 100 1469 0 0 42995 0 0100 1469 100 1469 0 0 38420 0 [ 67.425237] twistd[884]: 2026-08-23T03:05:51+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1539buildbot # 0100 1469 100 1469 0 0 31471 0 [ 67.434018] twistd[884]: 2026-08-23T03:05:51+0000 [-] starting build <Build test-flake/nix-register-gcroot number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-register-gcroot' worker='local-worker-000' state=BUILDING>1540buildbot # 01541buildbot # [ 67.442244] twistd[884]: 2026-08-23T03:05:51+0000 [-] sending ping1542buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds)1543buildbot # [ 67.446873] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] message from master: ping1544buildbot # [ 67.450441] twistd[884]: 2026-08-23T03:05:51+0000 [Broker,0,127.0.0.1] ping finished: success1545buildbot # [ 67.470711] twistd[884]: 2026-08-23T03:05:51+0000 [-] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']'>: RemoteCommand.run [14]1546buildbot # [ 67.479972] twistd[884]: 2026-08-23T03:05:51+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']' in dir 'build'1547buildbot # [ 67.483354] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command 14): startCommand:shell1548buildbot # [ 67.484871] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): RunProcess._startCommand1549buildbot # [ 67.488069] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test -r /nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test1550buildbot # [ 67.492731] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-register-gcroot/build (timeout 1200 secs)1551buildbot # [ 67.497131] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): watching logfiles {}1552buildbot # [ 67.500455] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', b'-r', b'/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']1553buildbot # [ 67.505387] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): using PTY: False1554buildbot # [ 67.574283] nix-daemon[1157]: accepted connection from pid 1317, user buildbot-worker1555buildbot # [ 67.595185] twistd[885]: 2026-08-23T03:05:51+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): command finished with signal None, exit code 0, elapsedTime: 0.1238331556buildbot # [ 67.601049] twistd[885]: 2026-08-23T03:05:51+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a106aba50>1557buildbot # [ 67.604503] twistd[884]: 2026-08-23T03:05:51+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']'> rc=01558buildbot # [ 67.627591] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(ShellCommand(name='Register gcroot', command=['nix-store', '--add-root', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/%(prop:attr)s'), '-r', Property(out_path)], logEnviron=False)): []1559buildbot # [ 67.642463] twistd[884]: 2026-08-23T03:05:51+0000 [-] step 'Register gcroot' complete: success (None)1560buildbot # [ 67.644761] twistd[884]: 2026-08-23T03:05:51+0000 [-] <Build test-flake/nix-register-gcroot number:1 results:success>: build finished1561buildbot # [ 67.652636] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1562buildbot # [ 67.796085] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(Trigger(name='Register gcroot', waitForFinish=True, schedulerNames=['test-flake-nix-register-gcroot'], haltOnFailure=True, flunkOnFailure=True, sourceStamps=[], alwaysUseLatest=False, updateSourceStamp=False, doStepIf=<function nix_build_steps.<locals>.<lambda> at 0xeb12b919bed0>, copy_properties=['out_path', 'attr'], set_properties={'report_status': False})): []1563buildbot # [ 67.809994] twistd[884]: 2026-08-23T03:05:51+0000 [-] step 'Register gcroot' complete: success (None)1564buildbot # [ 67.826819] twistd[884]: 2026-08-23T03:05:51+0000 [-] <RemoteShellCommand '['rm', '-f', 'result-aarch64-linux.test']'>: RemoteCommand.run [15]1565buildbot # [ 67.832619] twistd[884]: 2026-08-23T03:05:51+0000 [-] command '['rm', '-f', 'result-aarch64-linux.test']' in dir 'build'1566buildbot # [ 67.834056] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command 15): startCommand:shell1567buildbot # [ 67.835228] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): RunProcess._startCommand1568buildbot # [ 67.839663] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): rm -f result-aarch64-linux.test1569buildbot # [ 67.841799] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 1200 secs)1570buildbot # [ 67.844604] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): watching logfiles {}1571buildbot # [ 67.848629] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): argv: [b'rm', b'-f', b'result-aarch64-linux.test']1572buildbot # [ 67.850740] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): using PTY: False1573buildbot # [ 67.857711] twistd[885]: 2026-08-23T03:05:51+0000 [-] (command ['rm', '-f', 'result-aarch64-linux.test']): command finished with signal None, exit code 0, elapsedTime: 0.0318541574buildbot # [ 67.859757] twistd[885]: 2026-08-23T03:05:51+0000 [-] (command 15): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a100b4050>1575buildbot # [ 67.881266] twistd[884]: 2026-08-23T03:05:51+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-f', 'result-aarch64-linux.test']'> rc=01576buildbot # [ 67.905719] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(ShellCommand(name='Delete temporary gcroots', command=['rm', '-f', Interpolate('result-%(prop:attr)s')], logEnviron=False)): []1577buildbot # [ 67.914818] twistd[884]: 2026-08-23T03:05:51+0000 [-] step 'Delete temporary gcroots' complete: success (None)1578buildbot # [ 67.929473] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(UpdateBuildOutput(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, name='Update build output', path=PosixPath('/var/lib/buildbot-outputs'), branch_config={})): []1579buildbot # [ 67.937752] twistd[884]: 2026-08-23T03:05:51+0000 [-] step 'Update build output' complete: success (None)1580buildbot # [ 67.939827] twistd[884]: 2026-08-23T03:05:51+0000 [-] <Build test-flake/nix-build number:1 results:success>: build finished1581buildbot # [ 67.957466] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1582buildbot # [ 68.145490] twistd[884]: 2026-08-23T03:05:51+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1583buildbot # [ 68.196893] twistd[884]: 2026-08-23T03:05:51+0000 [-] step 'build flake' complete: failure (['(1 success, 1 failure, 1 skipped)'])1584buildbot # [ 68.212411] twistd[884]: 2026-08-23T03:05:51+0000 [-] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']'>: RemoteCommand.run [16]1585buildbot # [ 68.215573] twistd[884]: 2026-08-23T03:05:51+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']' in dir 'build'1586buildbot # [ 68.227939] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command 16): startCommand:shell1587buildbot # [ 68.229328] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): RunProcess._startCommand1588buildbot # [ 68.232809] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test -r /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test1589buildbot # [ 68.240560] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1590buildbot # [ 68.246283] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): watching logfiles {}1591buildbot # [ 68.250691] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', b'-r', b'/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']1592buildbot # [ 68.256789] twistd[885]: 2026-08-23T03:05:51+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): using PTY: False1593buildbot # [ 68.288511] sshd-session[1334]: Accepted publickey for root from ::1 port 56894 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81594buildbot # [ 68.301791] sshd-session[1334]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1595buildbot # [ 68.319420] systemd-logind[411]: New session '11' of user 'root' with class 'user' and type 'tty'.1596buildbot # [ 68.326502] systemd[1]: Started Session 11 of User root.1597buildbot # [ 68.354304] nix-daemon[1157]: accepted connection from pid 1336, user buildbot-worker1598buildbot # [ 68.376269] sshd-session[1338]: Received disconnect from ::1 port 56894:11: disconnected by user1599buildbot # [ 68.378246] sshd-session[1338]: Disconnected from user root ::1 port 568941600buildbot # [ 68.379461] sshd-session[1334]: pam_unix(sshd:session): session closed for user root1601buildbot # [ 68.391901] systemd[1]: session-11.scope: Deactivated successfully.1602buildbot # [ 68.396385] systemd-logind[411]: Session 11 logged out. Waiting for processes to exit.1603buildbot # [ 68.397494] systemd-logind[411]: Removed session 11.1604buildbot # [ 68.407404] twistd[885]: 2026-08-23T03:05:52+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): command finished with signal None, exit code 0, elapsedTime: 0.1829971605buildbot # [ 68.420431] twistd[885]: 2026-08-23T03:05:52+0000 [-] (command 16): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a100b4500>1606buildbot # [ 68.426199] twistd[884]: 2026-08-23T03:05:52+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']'> rc=01607buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1608buildbot # [ 68.485967] twistd[884]: 2026-08-23T03:05:52+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=PosixPath('/var/lib/buildbot-outputs'), name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb12b919b110>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb12b919b1c0>)): []1609buildbot # [ 68.507857] twistd[884]: 2026-08-23T03:05:52+0000 [-] step 'Process skipped builds' complete: success (None)1610buildbot # [ 68.540594] twistd[884]: 2026-08-23T03:05:52+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [17]1611buildbot # [ 68.552136] twistd[884]: 2026-08-23T03:05:52+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1612buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1613buildbot # Dload Upload Total Spent Left Speed1614buildbot # 0 [ 68.565414] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command 17): startCommand:shell1615buildbot # [ 68.566623] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1616buildbot # [ 68.570548] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1617buildbot # 0 0 0 0 0 0 0 0[ 68.587719] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1618buildbot # [ 68.602263] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1619buildbot # 100 1514 100 1514 0 0 26432 0 0100 1514 100 1514 0 [ 68.612136] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1620buildbot # [ 68.615186] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1621buildbot # 0 24579 0 0100 1514 100 1514 0 0 21747 0 01622buildbot # [ 68.622999] twistd[885]: 2026-08-23T03:05:52+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0513821623buildbot # [ 68.629503] twistd[885]: 2026-08-23T03:05:52+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a10079630>1624buildbot # [ 68.636108] twistd[884]: 2026-08-23T03:05:52+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01625buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds)1626buildbot # [ 68.659333] twistd[884]: 2026-08-23T03:05:52+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1627buildbot # [ 68.670578] twistd[884]: 2026-08-23T03:05:52+0000 [-] step 'Cleanup drv paths' complete: success (None)1628buildbot # [ 68.683148] twistd[884]: 2026-08-23T03:05:52+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb12b919b690>, logEnviron=False)): []1629buildbot # [ 68.696752] twistd[884]: 2026-08-23T03:05:52+0000 [-] step 'Evaluate effects' complete: skipped (None)1630buildbot # [ 68.703522] sshd-session[1349]: Accepted publickey for root from ::1 port 56904 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81631buildbot # [ 68.715886] sshd-session[1349]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1632buildbot # [ 68.727930] systemd-logind[411]: New session '12' of user 'root' with class 'user' and type 'tty'.1633buildbot # [ 68.731801] twistd[884]: 2026-08-23T03:05:52+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [18]1634buildbot # [ 68.740909] twistd[884]: 2026-08-23T03:05:52+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1635buildbot # [ 68.743349] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command 18): startCommand:shell1636buildbot # [ 68.752463] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1637buildbot # [ 68.755757] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev ab2ea518d6622d843f0eae97d69ede3d64496054 --branch master --repo test-flake1638buildbot # [ 68.760396] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1639buildbot # [ 68.764388] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1640buildbot # [ 68.767450] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'ab2ea518d6622d843f0eae97d69ede3d64496054', b'--branch', b'master', b'--repo', b'test-flake']1641buildbot # [ 68.772449] twistd[885]: 2026-08-23T03:05:52+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1642buildbot # [ 68.775914] systemd[1]: Started Session 12 of User root.1643buildbot # [ 68.824447] sshd-session[1353]: Received disconnect from ::1 port 56904:11: disconnected by user1644buildbot # [ 68.825668] sshd-session[1353]: Disconnected from user root ::1 port 569041645buildbot # [ 68.826582] sshd-session[1349]: pam_unix(sshd:session): session closed for user root1646buildbot # [ 68.833349] systemd[1]: session-12.scope: Deactivated successfully.1647buildbot # [ 68.836622] systemd-logind[411]: Session 12 logged out. Waiting for processes to exit.1648buildbot # [ 68.838052] systemd-logind[411]: Removed session 12.1649buildbot # [ 68.854324] twistd[884]: 2026-08-23T03:05:52+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1650buildbot # [ 69.143524] nix-daemon[1157]: accepted connection from pid 1365, user buildbot-worker1651buildbot # [ 69.179719] twistd[885]: 2026-08-23T03:05:52+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4406361652buildbot # [ 69.187422] twistd[885]: 2026-08-23T03:05:52+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf58a10079a90>1653buildbot # [ 69.192430] twistd[884]: 2026-08-23T03:05:52+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'ab2ea518d6622d843f0eae97d69ede3d64496054', '--branch', 'master', '--repo', 'test-flake']'> rc=01654buildbot # [ 69.228706] twistd[884]: 2026-08-23T03:05:52+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xeb12b911c050>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb12b919b950>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xeb12b919ba00>, logEnviron=False)): []1655buildbot # [ 69.243414] twistd[884]: 2026-08-23T03:05:52+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1656buildbot # [ 69.245594] twistd[884]: 2026-08-23T03:05:52+0000 [-] <Build test-flake/nix-eval number:1 results:failure>: build finished1657buildbot # [ 69.271647] twistd[884]: 2026-08-23T03:05:52+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1658buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1659buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1660buildbot # Dload Upload Total Spent Left Speed1661buildbot # 0 0 0 0 0 0 0 0 0100 1523 100 1523 0 0 71101 0 0100 1523 100 1523 0 0 60518 0 0100 1523 100 1523 0 0 52272 0 01662buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1663buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1664buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1665buildbot # Dload Upload Total Spent Left Speed1666buildbot # 0 0 0 0 0 0 0 0 0100 2172 100 2172 0 0 149.5k 0 0100 2172 100 2172 0 0 124.2k 0 0100 2172 100 2172 0 0 106.8k 0 01667buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1668buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties1669buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1670buildbot # Dload Upload Total Spent Left Speed1671buildbot # 0 0 0 0 0 0 0 0 0100 1548 100 1548 0 0 113.9k 0 0100 1548 100 1548 0 0 98755 0 0100 1548 100 1548 0 0 81234 0 01672buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)1673buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties1674buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1675buildbot # Dload Upload Total Spent Left Speed1676buildbot # 0 0 0 0 0 0 0 0 0100 2132 100 2132 0 0 178.0k 0 0100 2132 100 2132 0 0 146.7k 0 0100 2132 100 2132 0 0 125.1k 0 01677buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)1678buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1679buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1680buildbot # Dload Upload Total Spent Left Speed1681buildbot # 0 0 0 0 0 0 0 0 0100 2489 100 2489 0 0 210.7k 0 0100 2489 100 2489 0 0 173.8k 0 0100 2489 100 2489 0 0 148.5k 0 01682buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds)1683(finished: subtest: Poller triggers builds and verifies results, in 39.39 seconds)1684subtest: Verify output paths are written for skipped builds1685buildbot: must succeed: nix config show system1686buildbot: (finished: must succeed: nix config show system, in 0.09 seconds)1687buildbot: must succeed: 1688 nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath1689 1690buildbot: (finished: must succeed: 1691 nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath1692 , in 0.12 seconds)1693buildbot: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test1694buildbot: (finished: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.02 seconds)1695buildbot: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test1696buildbot: (finished: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.03 seconds)1697(finished: subtest: Verify output paths are written for skipped builds, in 0.26 seconds)1698(finished: run the VM test script, in 71.04 seconds)1699test script finished in 71.08s1700cleanup1701kill QemuMachine (pid 45)1702buildbot # qemu-system-aarch64: terminating on signal 15 from pid 39 (/nix/store/3inr3nxzqarhb9rh1z7s2s20j8c0395h-python3-3.14.7/bin/python3.14)1703(finished: cleanup, in 0.27 seconds)1704additionally exposed symbols:1705 buildbot,1706 vlan1,1707 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh1708Poller has started processing1709Pushed new commit to repository1710Expected output path for skippable-test: /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test