vm-test-run-buildbot-nix-gitea
checks.x86_64-linux.gitea
· build #56
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit gitea.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot: QEMU running (pid 45)11buildbot # Disk image does not exist, creating the virtualisation disk image...12buildbot # Formatting '/build/vm-state-buildbot/tmp.Tu5xT2bXfX', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: bdf5fda3-db93-4678-9c9e-d12fd0fde76717buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:02.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:08.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Aug 19 16:18:21 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/3y054sb91fg0idkzd6xrhcs4yv0q6l5b-nixos-system-buildbot-test/init regInfo=/nix/store/221an2ids4n9bas0da55aqb4ws7lvqki-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved51buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved52buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved53buildbot # [ 0.000000] NX (Execute Disable) protection: active54buildbot # [ 0.000000] APIC: Static calls initialized55buildbot # [ 0.000000] SMBIOS 2.8 present.56buildbot # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201457buildbot # [ 0.000000] DMI: Memory slots populated: 1/158buildbot # [ 0.000000] Hypervisor detected: KVM59buildbot # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000060buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0061buildbot # [ 0.000000] kvm-clock: using sched offset of 557579771 cycles62buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns63buildbot # [ 0.000005] tsc: Detected 2400.008 MHz processor64buildbot # [ 0.000810] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000065buildbot # [ 0.000837] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs66buildbot # [ 0.000840] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT67buildbot # [ 0.002746] found SMP MP-table at [mem 0x000f5450-0x000f545f]68buildbot # [ 0.002759] Using GB pages for direct mapping69buildbot # [ 0.002864] RAMDISK: [mem 0x3e34c000-0x3ffcffff]70buildbot # [ 0.002872] ACPI: Early table checksum verification disabled71buildbot # [ 0.002875] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )72buildbot # [ 0.002879] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002883] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001)74buildbot # [ 0.002892] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002894] ACPI: FACS 0x000000003FFE0000 00004076buildbot # [ 0.002896] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002897] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)78buildbot # [ 0.002899] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)79buildbot # [ 0.002900] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)80buildbot # [ 0.002902] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d]81buildbot # [ 0.002903] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219]82buildbot # [ 0.002903] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]83buildbot # [ 0.002904] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385]84buildbot # [ 0.002904] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd]85buildbot # [ 0.002905] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9]86buildbot # [ 0.002905] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421]87buildbot # [ 0.003126] No NUMA configuration found88buildbot # [ 0.003127] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff]89buildbot # [ 0.003129] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff]90buildbot # [ 0.005592] Zone ranges:91buildbot # [ 0.005592] DMA [mem 0x0000000000001000-0x0000000000ffffff]92buildbot # [ 0.005594] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff]93buildbot # [ 0.005595] Normal empty94buildbot # [ 0.005596] Device empty95buildbot # [ 0.005597] Movable zone start for each node96buildbot # [ 0.005597] Early memory node ranges97buildbot # [ 0.005598] node 0: [mem 0x0000000000001000-0x000000000009efff]98buildbot # [ 0.005599] node 0: [mem 0x0000000000100000-0x000000003ffd7fff]99buildbot # [ 0.005600] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]100buildbot # [ 0.005621] On node 0, zone DMA: 1 pages in unavailable ranges101buildbot # [ 0.005908] On node 0, zone DMA: 97 pages in unavailable ranges102buildbot # [ 0.025206] On node 0, zone DMA32: 40 pages in unavailable ranges103buildbot # [ 0.025647] ACPI: PM-Timer IO Port: 0x608104buildbot # [ 0.025658] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])105buildbot # [ 0.025684] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23106buildbot # [ 0.025687] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)107buildbot # [ 0.025688] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)108buildbot # [ 0.025689] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)109buildbot # [ 0.025690] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)110buildbot # [ 0.025691] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)111buildbot # [ 0.025693] ACPI: Using ACPI (MADT) for SMP configuration information112buildbot # [ 0.025694] ACPI: HPET id: 0x8086a201 base: 0xfed00000113buildbot # [ 0.025697] TSC deadline timer available114buildbot # [ 0.025701] CPU topo: Max. logical packages: 1115buildbot # [ 0.025702] CPU topo: Max. logical dies: 1116buildbot # [ 0.025702] CPU topo: Max. dies per package: 1117buildbot # [ 0.025705] CPU topo: Max. threads per core: 1118buildbot # [ 0.025706] CPU topo: Num. cores per package: 1119buildbot # [ 0.025706] CPU topo: Num. threads per package: 1120buildbot # [ 0.025707] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs121buildbot # [ 0.025724] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()122buildbot # [ 0.025755] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]123buildbot # [ 0.025757] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]124buildbot # [ 0.025758] [mem 0x40000000-0xafffffff] available for PCI devices125buildbot # [ 0.025759] Booting paravirtualized kernel on KVM126buildbot # [ 0.025762] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns127buildbot # [ 0.030220] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1128buildbot # [ 0.032536] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152129buildbot # [ 0.032583] kvm-guest: PV spinlocks disabled, single CPU130buildbot # [ 0.032584] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/3y054sb91fg0idkzd6xrhcs4yv0q6l5b-nixos-system-buildbot-test/init regInfo=/nix/store/221an2ids4n9bas0da55aqb4ws7lvqki-closure-info/registration console=ttyS0,115200n8 console=tty0131buildbot # [ 0.032679] Unknown kernel command line parameters "regInfo=/nix/store/221an2ids4n9bas0da55aqb4ws7lvqki-closure-info/registration", will be passed to user space.132buildbot # [ 0.032691] random: crng init done133buildbot # [ 0.032692] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes134buildbot # [ 0.033839] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)135buildbot # [ 0.033852] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)136buildbot # [ 0.033881] Fallback order for Node 0: 0137buildbot # [ 0.033884] Built 1 zonelists, mobility grouping on. Total pages: 262006138buildbot # [ 0.033885] Policy zone: DMA32139buildbot # [ 0.036628] mem auto-init: stack:all(zero), heap alloc:on, heap free:off140buildbot # [ 0.039225] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1141buildbot # [ 0.041611] allocated 2097152 bytes of page_ext142buildbot # [ 0.051550] ftrace: allocating 48728 entries in 192 pages143buildbot # [ 0.051553] ftrace: allocated 192 pages with 2 groups144buildbot # [ 0.052430] Dynamic Preempt: lazy145buildbot # [ 0.052570] rcu: Preemptible hierarchical RCU implementation.146buildbot # [ 0.052571] rcu: RCU event tracing is enabled.147buildbot # [ 0.052572] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.148buildbot # [ 0.052573] Trampoline variant of Tasks RCU enabled.149buildbot # [ 0.052574] Rude variant of Tasks RCU enabled.150buildbot # [ 0.052574] Tracing variant of Tasks RCU enabled.151buildbot # [ 0.052574] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.152buildbot # [ 0.052575] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1153buildbot # [ 0.052591] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.154buildbot # [ 0.052593] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.155buildbot # [ 0.052593] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.156buildbot # [ 0.057040] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16157buildbot # [ 0.057369] rcu: srcu_init: Setting srcu_struct sizes based on contention.158buildbot # [ 0.057377] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns159buildbot # [ 0.057478] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)160buildbot # [ 0.060942] Console: colour VGA+ 80x25161buildbot # [ 0.060945] printk: legacy console [tty0] enabled162buildbot # [ 0.090212] printk: legacy console [ttyS0] enabled163buildbot # [ 0.186574] ACPI: Core revision 20250807164buildbot # [ 0.187439] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns165buildbot # [ 0.189031] APIC: Switch to symmetric I/O mode setup166buildbot # [ 0.189974] x2apic enabled167buildbot # [ 0.190757] APIC: Switched APIC routing to: physical x2apic168buildbot # [ 0.192583] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1169buildbot # [ 0.193528] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns170buildbot # [ 0.195129] Calibrating delay loop (skipped) preset value.. 4800.01 BogoMIPS (lpj=2400008)171buildbot # [ 0.196214] x86/cpu: User Mode Instruction Prevention (UMIP) activated172buildbot # [ 0.197260] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127173buildbot # [ 0.198127] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0174buildbot # [ 0.199131] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto175buildbot # [ 0.200126] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl176buildbot # [ 0.201126] Transient Scheduler Attacks: Vulnerable: No microcode177buildbot # [ 0.202126] Spectre V2 : Mitigation: Enhanced / Automatic IBRS178buildbot # [ 0.203126] Speculative Return Stack Overflow: Mitigation: Safe RET179buildbot # [ 0.204126] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization180buildbot # [ 0.206134] Spectre V2 : Enabling IBPB for BPF181buildbot # [ 0.206838] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier182buildbot # [ 0.208126] active return thunk: srso_alias_return_thunk183buildbot # [ 0.208965] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'184buildbot # [ 0.210126] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'185buildbot # [ 0.211126] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'186buildbot # [ 0.212058] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'187buildbot # [ 0.212857] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'188buildbot # [ 0.213851] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'189buildbot # [ 0.214887] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'190buildbot # [ 0.216126] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256191buildbot # [ 0.217126] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64192buildbot # [ 0.218046] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512193buildbot # [ 0.218834] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024194buildbot # [ 0.219838] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8195buildbot # [ 0.220828] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.196buildbot # [ 0.255355] Freeing SMP alternatives memory: 44K197buildbot # [ 0.256100] pid_max: default: 32768 minimum: 301198buildbot # [ 0.256742] LSM: initializing lsm=capability,landlock,yama,bpf,ima199buildbot # [ 0.257940] landlock: Up and running.200buildbot # [ 0.258542] Yama: becoming mindful.201buildbot # [ 0.259340] LSM support for eBPF active202buildbot # [ 0.260134] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)203buildbot # [ 0.261150] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)204buildbot # [ 0.263731] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)205buildbot # [ 0.264680] Performance Events: Fam17h+ core perfctr, AMD PMU driver.206buildbot # [ 0.265131] ... version: 2207buildbot # [ 0.265865] ... bit width: 48208buildbot # [ 0.266129] ... generic counters: 6209buildbot # [ 0.266870] ... generic bitmap: 000000000000003f210buildbot # [ 0.267180] ... fixed-purpose counters: 0211buildbot # [ 0.267924] ... fixed-purpose bitmap: 0000000000000000212buildbot # [ 0.268129] ... value mask: 0000ffffffffffff213buildbot # [ 0.269048] ... max period: 00007fffffffffff214buildbot # [ 0.269840] ... global_ctrl mask: 000000000000003f215buildbot # [ 0.270261] signal: max sigframe size: 3376216buildbot # [ 0.271075] rcu: Hierarchical SRCU implementation.217buildbot # [ 0.271696] rcu: Max phase no-delay instances is 400.218buildbot # [ 0.276811] smp: Bringing up secondary CPUs ...219buildbot # [ 0.277144] smp: Brought up 1 node, 1 CPU220buildbot # [ 0.277807] smpboot: Total of 1 processors activated (4800.01 BogoMIPS)221buildbot # [ 0.278314] Memory: 940936K/1048024K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 99724K reserved, 0K cma-reserved)222buildbot # [ 0.279394] devtmpfs: initialized223buildbot # [ 0.280224] x86/mm: Memory block size: 128MB224buildbot # [ 0.281926] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)225buildbot # [ 0.283001] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).226buildbot # [ 0.284210] pinctrl core: initialized pinctrl subsystem227buildbot # [ 0.285364] PM: RTC time: 03:03:12, date: 2026-08-23228buildbot # [ 0.289347] NET: Registered PF_NETLINK/PF_ROUTE protocol family229buildbot # [ 0.290516] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations230buildbot # [ 0.291148] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations231buildbot # [ 0.292294] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations232buildbot # [ 0.293140] audit: initializing netlink subsys (disabled)233buildbot # [ 0.294130] audit: type=2000 audit(1787454193.538:1): state=initialized audit_enabled=0 res=1234buildbot # [ 0.295313] thermal_sys: Registered thermal governor 'fair_share'235buildbot # [ 0.295315] thermal_sys: Registered thermal governor 'bang_bang'236buildbot # [ 0.296129] thermal_sys: Registered thermal governor 'step_wise'237buildbot # [ 0.297036] thermal_sys: Registered thermal governor 'user_space'238buildbot # [ 0.297835] thermal_sys: Registered thermal governor 'power_allocator'239buildbot # [ 0.298151] cpuidle: using governor menu240buildbot # [ 0.300308] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5241buildbot # [ 0.301371] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]242buildbot # [ 0.302131] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry243buildbot # [ 0.303140] PCI: Using configuration type 1 for base access244buildbot # [ 0.304228] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.245buildbot # [ 0.311156] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages246buildbot # [ 0.312130] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page247buildbot # [ 0.313122] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages248buildbot # [ 0.318130] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page249buildbot # [ 0.326483] ACPI: Added _OSI(Module Device)250buildbot # [ 0.327130] ACPI: Added _OSI(Processor Device)251buildbot # [ 0.327829] ACPI: Added _OSI(Processor Aggregator Device)252buildbot # [ 0.335732] ACPI: 1 ACPI AML tables successfully acquired and loaded253buildbot # [ 0.339543] ACPI: Interpreter enabled254buildbot # [ 0.340144] ACPI: PM: (supports S0 S3 S4 S5)255buildbot # [ 0.340840] ACPI: Using IOAPIC for interrupt routing256buildbot # [ 0.343166] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug257buildbot # [ 0.344129] PCI: Using E820 reservations for host bridge windows258buildbot # [ 0.347183] ACPI: Enabled 2 GPEs in block 00 to 3F259buildbot # [ 0.355714] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])260buildbot # [ 0.356136] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]261buildbot # [ 0.357273] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]262buildbot # [ 0.358252] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]263buildbot # [ 0.359567] PCI host bridge to bus 0000:00264buildbot # [ 0.360134] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]265buildbot # [ 0.361090] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]266buildbot # [ 0.361883] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]267buildbot # [ 0.362925] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]268buildbot # [ 0.363933] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]269buildbot # [ 0.364942] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]270buildbot # [ 0.365981] pci_bus 0000:00: root bus resource [bus 00-ff]271buildbot # [ 0.366869] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint272buildbot # [ 0.368467] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint273buildbot # [ 0.371192] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]274buildbot # [ 0.372139] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]275buildbot # [ 0.372998] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]276buildbot # [ 0.374299] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]277buildbot # [ 0.375895] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint278buildbot # [ 0.378144] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f]279buildbot # [ 0.378918] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]280buildbot # [ 0.379783] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]281buildbot # [ 0.380134] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]282buildbot # [ 0.382166] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint283buildbot # [ 0.385144] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f]284buildbot # [ 0.385914] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]285buildbot # [ 0.386781] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]286buildbot # [ 0.387688] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint287buildbot # [ 0.390145] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf]288buildbot # [ 0.391693] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]289buildbot # [ 0.392149] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]290buildbot # [ 0.393662] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint291buildbot # [ 0.395136] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f]292buildbot # [ 0.395914] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]293buildbot # [ 0.396778] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]294buildbot # [ 0.397667] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint295buildbot # [ 0.399136] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf]296buildbot # [ 0.399901] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]297buildbot # [ 0.400150] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]298buildbot # [ 0.401679] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint299buildbot # [ 0.404145] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f]300buildbot # [ 0.404917] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]301buildbot # [ 0.406149] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]302buildbot # [ 0.407667] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint303buildbot # [ 0.409137] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df]304buildbot # [ 0.409920] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]305buildbot # [ 0.410784] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]306buildbot # [ 0.411134] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref]307buildbot # [ 0.412568] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint308buildbot # [ 0.415141] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]309buildbot # [ 0.416008] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]310buildbot # [ 0.417390] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint311buildbot # [ 0.419145] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff]312buildbot # [ 0.419916] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]313buildbot # [ 0.420779] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]314buildbot # [ 0.421653] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint315buildbot # [ 0.423873] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff]316buildbot # [ 0.424135] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]317buildbot # [ 0.425008] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]318buildbot # [ 0.426419] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint319buildbot # [ 0.427845] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f]320buildbot # [ 0.428329] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint321buildbot # [ 0.429811] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f]322buildbot # [ 0.430317] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint323buildbot # [ 0.433765] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f]324buildbot # [ 0.434448] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint325buildbot # [ 0.436136] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]326buildbot # [ 0.437238] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint327buildbot # [ 0.438403] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO328buildbot # [ 0.439401] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint329buildbot # [ 0.442156] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f]330buildbot # [ 0.442969] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]331buildbot # [ 0.444134] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint332buildbot # [ 0.445999] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]333buildbot # [ 0.449670] ACPI: PCI: Interrupt link LNKA configured for IRQ 10334buildbot # [ 0.450232] ACPI: PCI: Interrupt link LNKB configured for IRQ 10335buildbot # [ 0.451228] ACPI: PCI: Interrupt link LNKC configured for IRQ 11336buildbot # [ 0.452224] ACPI: PCI: Interrupt link LNKD configured for IRQ 11337buildbot # [ 0.453228] ACPI: PCI: Interrupt link LNKE configured for IRQ 10338buildbot # [ 0.454225] ACPI: PCI: Interrupt link LNKF configured for IRQ 10339buildbot # [ 0.455228] ACPI: PCI: Interrupt link LNKG configured for IRQ 11340buildbot # [ 0.456227] ACPI: PCI: Interrupt link LNKH configured for IRQ 11341buildbot # [ 0.457164] ACPI: PCI: Interrupt link GSIA configured for IRQ 16342buildbot # [ 0.458092] ACPI: PCI: Interrupt link GSIB configured for IRQ 17343buildbot # [ 0.458834] ACPI: PCI: Interrupt link GSIC configured for IRQ 18344buildbot # [ 0.459142] ACPI: PCI: Interrupt link GSID configured for IRQ 19345buildbot # [ 0.460140] ACPI: PCI: Interrupt link GSIE configured for IRQ 20346buildbot # [ 0.461142] ACPI: PCI: Interrupt link GSIF configured for IRQ 21347buildbot # [ 0.462102] ACPI: PCI: Interrupt link GSIG configured for IRQ 22348buildbot # [ 0.462842] ACPI: PCI: Interrupt link GSIH configured for IRQ 23349buildbot # [ 0.464171] iommu: Default domain type: Translated350buildbot # [ 0.464934] iommu: DMA domain TLB invalidation policy: lazy mode351buildbot # [ 0.466087] ACPI: bus type USB registered352buildbot # [ 0.466660] usbcore: registered new interface driver usbfs353buildbot # [ 0.467140] usbcore: registered new interface driver hub354buildbot # [ 0.467978] usbcore: registered new device driver usb355buildbot # [ 0.469690] NetLabel: Initializing356buildbot # [ 0.470129] NetLabel: domain hash size = 128357buildbot # [ 0.470835] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO358buildbot # [ 0.471172] NetLabel: unlabeled traffic allowed by default359buildbot # [ 0.472033] PCI: Using ACPI for IRQ routing360buildbot # [ 0.513956] pci 0000:00:01.0: vgaarb: setting as boot VGA device361buildbot # [ 0.514124] pci 0000:00:01.0: vgaarb: bridge control possible362buildbot # [ 0.514124] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none363buildbot # [ 0.514133] vgaarb: loaded364buildbot # [ 0.514854] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0365buildbot # [ 0.515128] hpet0: 3 comparators, 64-bit 100.000000 MHz counter366buildbot # [ 0.518224] clocksource: Switched to clocksource kvm-clock367buildbot # [ 0.521810] VFS: Disk quotas dquot_6.6.0368buildbot # [ 0.522514] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)369buildbot # [ 0.523867] pnp: PnP ACPI init370buildbot # [ 0.524640] ACPI: IRQ 4 override to edge(!), high(!)371buildbot # [ 0.525584] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved372buildbot # [ 0.527048] pnp: PnP ACPI: found 6 devices373buildbot # [ 0.534596] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns374buildbot # [ 0.535979] clocksource: Switched to clocksource acpi_pm375buildbot # [ 0.536899] NET: Registered PF_INET protocol family376buildbot # [ 0.537888] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)377buildbot # [ 0.554942] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)378buildbot # [ 0.556398] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)379buildbot # [ 0.557640] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)380buildbot # [ 0.558873] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)381buildbot # [ 0.560045] TCP: Hash tables configured (established 8192 bind 8192)382buildbot # [ 0.561084] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)383buildbot # [ 0.562313] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)384buildbot # [ 0.563367] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)385buildbot # [ 0.564526] NET: Registered PF_UNIX/PF_LOCAL protocol family386buildbot # [ 0.565484] NET: Registered PF_XDP protocol family387buildbot # [ 0.566288] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]388buildbot # [ 0.567245] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]389buildbot # [ 0.568203] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]390buildbot # [ 0.569238] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]391buildbot # [ 0.570276] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]392buildbot # [ 0.571311] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]393buildbot # [ 0.572958] ACPI: \_SB_.GSIA: Enabled at IRQ 16394buildbot # [ 0.574982] ACPI: \_SB_.GSIB: Enabled at IRQ 17395buildbot # [ 0.577091] ACPI: \_SB_.GSIC: Enabled at IRQ 18396buildbot # [ 0.579105] ACPI: \_SB_.GSID: Enabled at IRQ 19397buildbot # [ 0.580837] PCI: CLS 0 bytes, default 64398buildbot # [ 0.581878] Trying to unpack rootfs image as initramfs...399buildbot # [ 0.585826] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns400buildbot # [ 0.626573] Initialise system trusted keyrings401buildbot # [ 0.628822] workingset: timestamp_bits=40 max_order=18 bucket_order=0402buildbot # [ 0.651880] Key type asymmetric registered403buildbot # [ 0.652562] Asymmetric key parser 'x509' registered404buildbot # [ 0.653393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)405buildbot # [ 0.656916] io scheduler mq-deadline registered406buildbot # [ 0.657614] io scheduler kyber registered407buildbot # [ 0.661397] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled408buildbot # [ 0.662644] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A409buildbot # [ 0.667911] Linux agpgart interface v0.103410buildbot # [ 0.668617] ACPI: bus type drm_connector registered411buildbot # [ 0.671927] usbcore: registered new interface driver usbserial_generic412buildbot # [ 0.672940] usbserial: USB Serial support registered for generic413buildbot # [ 0.675785] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.414buildbot # [ 0.675785] Please enable it if your BIOS has the CPPC option.415buildbot # [ 0.677888] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled416buildbot # [ 0.681915] drop_monitor: Initializing network drop monitor service417buildbot # [ 0.683023] NET: Registered PF_INET6 protocol family418buildbot # [ 0.686259] Segment Routing with IPv6419buildbot # [ 0.686937] In-situ OAM (IOAM) with IPv6420buildbot # [ 0.689114] IPI shorthand broadcast: enabled421buildbot # [ 0.697394] sched_clock: Marking stable (563014529, 133748270)->(771850737, -75087938)422buildbot # [ 0.702925] registered taskstats version 1423buildbot # [ 0.703827] Loading compiled-in X.509 certificates424buildbot # [ 0.720392] Demotion targets for Node 0: null425buildbot # [ 0.722818] Key type .fscrypt registered426buildbot # [ 0.723439] Key type fscrypt-provisioning registered427buildbot # [ 0.724350] ima: No TPM chip found, activating TPM-bypass!428buildbot # [ 0.726781] ima: Allocated hash algorithm: sha1429buildbot # [ 0.727537] ima: No architecture policies found430buildbot # [ 0.730782] PM: Magic number: 6:569:58431buildbot # [ 0.732400] RAS: Correctable Errors collector initialized.432buildbot # [ 0.742447] clk: Disabling unused clocks433buildbot # [ 0.744783] PM: genpd: Disabling unused power domains434buildbot # [ 0.918793] Freeing initrd memory: 29200K435buildbot # [ 0.922436] Freeing unused decrypted memory: 2028K436buildbot # [ 0.925141] Freeing unused kernel image (initmem) memory: 3644K437buildbot # [ 0.926186] Write protecting the kernel read-only data: 32768k438buildbot # [ 0.928070] Freeing unused kernel image (text/rodata gap) memory: 1216K439buildbot # [ 0.929566] Freeing unused kernel image (rodata/data gap) memory: 756K440buildbot # [ 0.980564] x86/mm: Checked W+X mappings: passed, no W+X pages found.441buildbot # [ 0.981600] Run /init as init process442buildbot # [ 0.992015] systemd[1]: Inserted module 'autofs4'443buildbot # [ 1.008360] fuse: init (API version 7.45)444buildbot # [ 1.014218] ACPI: \_SB_.GSIG: Enabled at IRQ 22445buildbot # [ 1.016534] ACPI: \_SB_.GSIH: Enabled at IRQ 23446buildbot # [ 1.019669] ACPI: \_SB_.GSIE: Enabled at IRQ 20447buildbot # [ 1.021971] ACPI: \_SB_.GSIF: Enabled at IRQ 21448buildbot # [ 1.047460] systemd[1]: Successfully made /usr/ read-only.449buildbot # [ 1.384065] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)450buildbot # [ 1.395460] systemd[1]: Detected virtualization kvm.451buildbot # [ 1.397527] systemd[1]: Detected architecture x86-64.452buildbot # [ 1.399570] systemd[1]: Running in initrd.453buildbot # [ 1.402076] systemd[1]: Initializing machine ID from random generator.454buildbot # [ 1.404920] systemd[1]: Hostname set to <buildbot>.455buildbot # [ 1.623438] systemd[1]: bpf-restrict-fs: LSM BPF program attached456buildbot # [ 1.677110] systemd[1]: Queued start job for default target Initrd Default Target.457buildbot # [ 1.681058] systemd[1]: Created slice Slice /system/modprobe.458buildbot # [ 1.682149] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.459buildbot # [ 1.683482] systemd[1]: Expecting device /dev/disk/by-label/nixos...460buildbot # [ 1.684551] systemd[1]: Reached target Path Units.461buildbot # [ 1.685395] systemd[1]: Reached target Slice Units.462buildbot # [ 1.686249] systemd[1]: Reached target Swaps.463buildbot # [ 1.687734] systemd[1]: Reached target Timer Units.464buildbot # [ 1.688874] systemd[1]: Listening on D-Bus System Message Bus Socket.465buildbot # [ 1.690015] systemd[1]: Listening on Journal Socket (/dev/log).466buildbot # [ 1.691162] systemd[1]: Listening on Journal Sockets.467buildbot # [ 1.692118] systemd[1]: Listening on udev Control Socket.468buildbot # [ 1.693080] systemd[1]: Listening on udev Kernel Socket.469buildbot # [ 1.694052] systemd[1]: Reached target Socket Units.470buildbot # [ 1.695773] systemd[1]: Starting Create List of Static Device Nodes...471buildbot # [ 1.699836] systemd[1]: Starting Load Kernel Module 9pnet_virtio...472buildbot # [ 1.707828] systemd[1]: Starting Load Kernel Module configfs...473buildbot # [ 1.721130] systemd[1]: Starting Journal Service...474buildbot # [ 1.734642] systemd[1]: Starting Load Kernel Modules...475buildbot # [ 1.739840] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os476buildbot # [ 1.756391] netfs: FS-Cache loaded477buildbot # [ 1.761582] 9pnet: Installing 9P2000 support478buildbot # [ 1.776345] systemd[1]: Starting Coldplug All udev Devices...479buildbot # [ 1.787310] systemd-journald[67]: Collecting audit messages is disabled.480buildbot # [ 1.789129] systemd[1]: Finished Create List of Static Device Nodes.481buildbot # [ 1.795883] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.482buildbot # [ 1.803149] systemd[1]: Finished Load Kernel Module 9pnet_virtio.483buildbot # [ 1.809136] systemd[1]: modprobe@configfs.service: Deactivated successfully.484buildbot # [ 1.816119] systemd[1]: Finished Load Kernel Module configfs.485buildbot # [ 1.820180] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config486buildbot # [ 1.822211] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.487buildbot # [ 1.829927] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev488buildbot # [ 1.832849] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...489buildbot # [ 1.861286] systemd[1]: Finished Load Kernel Modules.490buildbot # [ 1.866663] systemd[1]: Starting Apply Kernel Variables...491buildbot # [ 1.879165] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.492buildbot # [ 1.890942] systemd[1]: Starting Create Static Device Nodes in /dev...493buildbot # [ 1.903876] systemd[1]: Finished Apply Kernel Variables.494buildbot # [ 1.772478] systemd-modules-load[68]: Inserted module 'dm_mod'[ 1.908058] systemd[1]: Started Journal Service.495buildbot # 496buildbot # [ 1.777421] systemd-modules-load[68]: Inserted module 'virtio_balloon'497buildbot # [ 1.778396] systemd-modules-load[68]: Inserted module 'virtio_gpu'498buildbot # [ 1.793112] systemd[1]: Finished Create Static Device Nodes in /dev.499buildbot # [ 1.794029] systemd[1]: Reached target Preparation for Local File Systems.500buildbot # [ 1.794921] systemd[1]: Reached target Local File Systems.501buildbot # [ 1.796337] systemd[1]: Starting Create System Files and Directories...502buildbot # [ 1.804072] systemd[1]: Starting Rule-based Manager for Device Events and Files...503buildbot # [ 1.826095] systemd[1]: Finished Create System Files and Directories.504buildbot # [ 1.847948] systemd-udevd[83]: Using default interface naming scheme 'v261'.505buildbot # [ 1.871846] systemd[1]: Started Rule-based Manager for Device Events and Files.506buildbot # [ 1.928717] systemd[1]: Finished Coldplug All udev Devices.507buildbot # [ 1.929957] systemd[1]: Reached target System Initialization.508buildbot # [ 1.932077] systemd[1]: Reached target Basic System.509buildbot # [ 2.232402] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12510buildbot # [ 2.244327] virtio_blk virtio5: 1/0/0 default/read/poll queues511buildbot # [ 2.253395] serio: i8042 KBD port at 0x60,0x64 irq 1512buildbot # [ 2.268725] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)513buildbot # [ 2.271152] serio: i8042 AUX port at 0x60,0x64 irq 12514buildbot # [ 2.276594] ehci-pci 0000:00:1d.7: EHCI Host Controller515buildbot # [ 2.277301] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1516buildbot # [ 2.278979] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000517buildbot # [ 2.284964] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00518buildbot # [ 2.287810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18519buildbot # [ 2.288854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1520buildbot # [ 2.292913] usb usb1: Product: EHCI Host Controller521buildbot # [ 2.293645] usb usb1: Manufacturer: Linux 6.18.45 ehci_hcd522buildbot # [ 2.294515] usb usb1: SerialNumber: 0000:00:1d.7523buildbot # [ 2.295356] hub 1-0:1.0: USB hub found524buildbot # [ 2.296785] hub 1-0:1.0: 6 ports detected525buildbot # [ 2.304091] uhci_hcd 0000:00:1d.0: UHCI Host Controller526buildbot # [ 2.307230] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2527buildbot # [ 2.308394] uhci_hcd 0000:00:1d.0: detected 2 ports528buildbot # [ 2.320878] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200529buildbot # [ 2.331232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18530buildbot # [ 2.332304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1531buildbot # [ 2.346992] usb usb2: Product: UHCI Host Controller532buildbot # [ 2.347641] usb usb2: Manufacturer: Linux 6.18.45 uhci_hcd533buildbot # [ 2.356774] usb usb2: SerialNumber: 0000:00:1d.0534buildbot # [ 2.362807] hub 2-0:1.0: USB hub found535buildbot # [ 2.363632] hub 2-0:1.0: 2 ports detected536buildbot # [ 2.234187] systemd[1]: Starting Virtual Console Setup...537buildbot # [ 2.237249] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line.538buildbot # [ 2.382438] SCSI subsystem initialized539buildbot # [ 2.384021] uhci_hcd 0000:00:1d.1: UHCI Host Controller540buildbot # [ 2.384673] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3541buildbot # [ 2.262380] (udev-worker)[86]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.542buildbot # [ 2.264223] (udev-worker)[86]: Network interface NamePolicy= disabled on kernel command line.543buildbot # [ 2.402300] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0544buildbot # [ 2.278173] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones.545buildbot # [ 2.281580] systemd[1]: Finished Virtual Console Setup.546buildbot # [ 2.422798] uhci_hcd 0000:00:1d.1: detected 2 ports547buildbot # [ 2.423690] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220548buildbot # [ 2.435150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18549buildbot # [ 2.436226] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1550buildbot # [ 2.442783] usb usb3: Product: UHCI Host Controller551buildbot # [ 2.443394] usb usb3: Manufacturer: Linux 6.18.45 uhci_hcd552buildbot # [ 2.312144] systemd[1]: Found device /dev/disk/by-label/nixos.553buildbot # [ 2.314744] systemd[1]: Reached target Initrd Root Device.554buildbot # [ 2.316123] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...555buildbot # [ 2.451782] usb usb3: SerialNumber: 0000:00:1d.1556buildbot # [ 2.455681] hub 3-0:1.0: USB hub found557buildbot # [ 2.456546] hub 3-0:1.0: 2 ports detected558buildbot # [ 2.467814] uhci_hcd 0000:00:1d.2: UHCI Host Controller559buildbot # [ 2.468472] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4560buildbot # [ 2.470795] uhci_hcd 0000:00:1d.2: detected 2 ports561buildbot # [ 2.471514] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240562buildbot # [ 2.474945] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18563buildbot # [ 2.477903] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1564buildbot # [ 2.479798] usb usb4: Product: UHCI Host Controller565buildbot # [ 2.480465] usb usb4: Manufacturer: Linux 6.18.45 uhci_hcd566buildbot # [ 2.482353] usb usb4: SerialNumber: 0000:00:1d.2567buildbot # [ 2.356308] systemd-fsck[108]: nixos: clean, 12/65536 files, 13019/262144 blocks568buildbot # [ 2.491493] hub 4-0:1.0: USB hub found569buildbot # [ 2.492817] hub 4-0:1.0: 2 ports detected570buildbot # [ 2.364388] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.571buildbot # [ 2.516723] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode572buildbot # [ 2.522031] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)573buildbot # [ 2.526632] ahci 0000:00:1f.2: flags: 64bit ncq only574buildbot # [ 2.535050] scsi host0: ahci575buildbot # [ 2.535774] usb 1-1: new high-speed USB device number 2 using ehci-pci576buildbot # [ 2.538053] scsi host1: ahci577buildbot # [ 2.540806] scsi host2: ahci578buildbot # [ 2.543085] scsi host3: ahci579buildbot # [ 2.545930] scsi host4: ahci580buildbot # [ 2.549081] scsi host5: ahci581buildbot # [ 2.549604] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1582buildbot # [ 2.552095] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1583buildbot # [ 2.553240] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1584buildbot # [ 2.554338] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1585buildbot # [ 2.555437] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1586buildbot # [ 2.556517] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1587buildbot # [ 2.664185] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00588buildbot # [ 2.666929] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10589buildbot # [ 2.670012] usb 1-1: Product: QEMU USB Tablet590buildbot # [ 2.671697] usb 1-1: Manufacturer: QEMU591buildbot # [ 2.673249] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1592buildbot # [ 2.703679] hid: raw HID events driver (C) Jiri Kosina593buildbot # [ 2.651783] systemd[1]: Mounting /sysroot...594buildbot # [ 2.871290] ata4: SATA link down (SStatus 0 SControl 300)595buildbot # [ 2.873429] ata6: SATA link down (SStatus 0 SControl 300)596buildbot # [ 2.875846] ata1: SATA link down (SStatus 0 SControl 300)597buildbot # [ 2.878035] ata5: SATA link down (SStatus 0 SControl 300)598buildbot # [ 2.880068] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)599buildbot # [ 2.882389] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100600buildbot # [ 2.884457] ata3.00: applying bridge limits601buildbot # [ 2.886257] ata2: SATA link down (SStatus 0 SControl 300)602buildbot # [ 2.888398] ata3.00: configured for UDMA/100603buildbot # [ 2.890624] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5604buildbot # [ 2.956436] usbcore: registered new interface driver usbhid605buildbot # [ 2.962144] usbhid: USB HID core driver606buildbot # [ 2.983986] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2607buildbot # [ 2.987392] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0608buildbot # [ 2.991978] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray609buildbot # [ 3.002963] cdrom: Uniform CD-ROM driver Revision: 3.20610buildbot # [ 3.006411] EXT4-fs (vda): mounted filesystem bdf5fda3-db93-4678-9c9e-d12fd0fde767 r/w with ordered data mode. Quota mode: none.611buildbot # [ 2.879126] systemd[1]: Mounted /sysroot.612buildbot # [ 2.880380] systemd[1]: Reached target Initrd Root File System.613buildbot # [ 2.884065] systemd[1]: Starting Mountpoints Configured in the Real Root...614buildbot # [ 2.896842] systemd-sysroot-fstab-check[139]: /sysroot should be mounted in the initrd, will request daemon-reload.615buildbot # [ 2.902067] systemd[1]: Reload requested from client PID 139 ('systemd-sysroot') (unit initrd-parse-etc.service)...616buildbot # [ 2.903409] systemd[1]: Reloading...617buildbot # [ 2.985120] systemd[1]: Reloading finished in 83 ms.618buildbot # [ 2.992751] systemd-sysroot-fstab-check[139]: Requesting initrd-fs.target/start/replace...619buildbot # [ 2.995159] systemd-sysroot-fstab-check[139]: Requesting swap.target/start/replace...620buildbot # [ 2.999390] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio621buildbot # [ 3.001862] systemd[1]: initrd-parse-etc.service: Deactivated successfully.622buildbot # [ 3.002808] systemd[1]: Finished Mountpoints Configured in the Real Root.623buildbot # [ 3.003742] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.624buildbot # [ 3.653281] systemd[1]: Mounting /sysroot/nix/.ro-store...625buildbot # [ 3.660174] systemd[1]: Mounting /sysroot/nix/.rw-store...626buildbot # [ 3.667172] systemd[1]: Mounting /sysroot/run...627buildbot # [ 3.677309] systemd[1]: Mounting /sysroot/tmp/shared...628buildbot # [ 3.688701] systemd[1]: Mounting /sysroot/tmp/xchg...629buildbot # [ 3.726654] systemd[1]: Mounted /sysroot/nix/.rw-store.630buildbot # [ 3.863424] 9p: Installing v9fs 9p2000 file system support631buildbot # [ 3.732846] systemd[1]: Mounted /sysroot/run.632buildbot # [ 3.740200] systemd[1]: Starting rw-sysroot-nix-store.service...633buildbot # [ 3.742762] systemd[1]: Mounted /sysroot/nix/.ro-store.634buildbot # [ 3.744285] systemd[1]: Mounted /sysroot/tmp/shared.635buildbot # [ 3.745995] systemd[1]: Mounted /sysroot/tmp/xchg.636buildbot # [ 3.756248] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.637buildbot # [ 3.757605] systemd[1]: Finished rw-sysroot-nix-store.service.638buildbot # [ 3.759710] systemd[1]: Mounting /sysroot/nix/store...639buildbot # [ 3.778199] systemd[1]: Mounted /sysroot/nix/store.640buildbot # [ 3.779193] systemd[1]: Reached target Initrd File Systems.641buildbot # [ 3.780626] systemd[1]: Starting Find NixOS closure...642buildbot # [ 3.784137] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...643buildbot # [ 3.799083] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.644buildbot # [ 3.806880] systemd[1]: Finished Find NixOS closure.645buildbot # [ 3.808903] systemd[1]: Reached target Initrd Default Target.646buildbot # [ 3.809923] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...647buildbot # [ 3.823573] systemd[1]: Stopped target Initrd Default Target.648buildbot # [ 3.824700] systemd[1]: Stopped target Basic System.649buildbot # [ 3.826116] systemd[1]: Stopped target Initrd Root Device.650buildbot # [ 3.826818] systemd[1]: Stopped target Path Units.651buildbot # [ 3.827569] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.652buildbot # [ 3.828494] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.653buildbot # [ 3.829491] systemd[1]: Stopped target Slice Units.654buildbot # [ 3.830410] systemd[1]: Stopped target Socket Units.655buildbot # [ 3.831381] systemd[1]: Stopped target System Initialization.656buildbot # [ 3.832314] systemd[1]: Stopped target Swaps.657buildbot # [ 3.833149] systemd[1]: Stopped target Timer Units.658buildbot # [ 3.833951] systemd[1]: dbus.socket: Deactivated successfully.659buildbot # [ 3.834949] systemd[1]: Closed D-Bus System Message Bus Socket.660buildbot # [ 3.836135] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.661buildbot # [ 3.837090] systemd[1]: Stopped Find NixOS closure.662buildbot # [ 3.838101] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio663buildbot # [ 3.839793] systemd[1]: Starting rw-sysroot-nix-store.service...664buildbot # [ 3.841172] systemd[1]: systemd-sysctl.service: Deactivated successfully.665buildbot # [ 3.842230] systemd[1]: Stopped Apply Kernel Variables.666buildbot # [ 3.843107] systemd[1]: systemd-modules-load.service: Deactivated successfully.667buildbot # [ 3.845108] systemd[1]: Stopped Load Kernel Modules.668buildbot # [ 3.846058] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.669buildbot # [ 3.847123] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.670buildbot # [ 3.848646] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.671buildbot # [ 3.849694] systemd[1]: Stopped Create System Files and Directories.672buildbot # [ 3.851041] systemd[1]: Stopped target Local File Systems.673buildbot # [ 3.851885] systemd[1]: Stopped target Preparation for Local File Systems.674buildbot # [ 3.854121] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.675buildbot # [ 3.855038] systemd[1]: Stopped Coldplug All udev Devices.676buildbot # [ 3.857129] systemd[1]: Stopping Rule-based Manager for Device Events and Files...677buildbot # [ 3.860106] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.678buildbot # [ 3.860995] systemd[1]: Stopped Virtual Console Setup.679buildbot # [ 3.868944] systemd[1]: initrd-cleanup.service: Deactivated successfully.680buildbot # [ 3.871186] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.681buildbot # [ 3.873821] systemd[1]: systemd-udevd.service: Deactivated successfully.682buildbot # [ 3.875104] systemd[1]: Stopped Rule-based Manager for Device Events and Files.683buildbot # [ 3.876491] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.684buildbot # [ 3.877843] systemd[1]: Finished rw-sysroot-nix-store.service.685buildbot # [ 3.881228] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.686buildbot # [ 3.882129] systemd[1]: Closed udev Control Socket.687buildbot # [ 3.883361] systemd[1]: Starting Cleanup udev Database...688buildbot # [ 3.885144] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.689buildbot # [ 3.886113] systemd[1]: Stopped Create Static Device Nodes in /dev.690buildbot # [ 3.887120] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.691buildbot # [ 3.888092] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.692buildbot # [ 3.889114] systemd[1]: kmod-static-nodes.service: Deactivated successfully.693buildbot # [ 3.890156] systemd[1]: Stopped Create List of Static Device Nodes.694buildbot # [ 3.905152] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.695buildbot # [ 3.906246] systemd[1]: Finished Cleanup udev Database.696buildbot # [ 3.907335] systemd[1]: Reached target Switch Root.697buildbot # [ 3.908836] systemd[1]: Starting NixOS Activation...698buildbot # [ 4.061537] initrd-nixos-activation-start[193]: booting system configuration /nix/store/3y054sb91fg0idkzd6xrhcs4yv0q6l5b-nixos-system-buildbot-test699buildbot # [ 4.125584] initrd-nixos-activation-start[193]: running activation script...700buildbot # [ 4.508686] initrd-nixos-activation-start[216]: setting up /etc...701buildbot # [ 4.751825] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.702buildbot # [ 4.754062] systemd[1]: Finished NixOS Activation.703buildbot # [ 4.755186] systemd[1]: Starting Switch Root...704buildbot # [ 4.768131] systemd[1]: Switching root.705buildbot # [ 5.032940] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).706buildbot # [ 5.192642] NET: Registered PF_VSOCK protocol family707buildbot # [ 5.577502] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)708buildbot # [ 5.586614] systemd[1]: Detected virtualization kvm.709buildbot # [ 5.588460] systemd[1]: Detected architecture x86-64.710buildbot # [ 5.590272] systemd[1]: Detected first boot.711buildbot # [ 5.597298] systemd[1]: Initializing machine ID from random generator.712buildbot # [ 5.855223] systemd[1]: bpf-restrict-fs: LSM BPF program attached713buildbot # [ 5.984760] systemd[1]: Applying preset policy.714buildbot # [ 6.428518] systemd[1]: Populated /etc with preset unit settings.715buildbot # [ 6.901227] systemd[1]: initrd-switch-root.service: Deactivated successfully.716buildbot # [ 6.902812] systemd[1]: Stopped initrd-switch-root.service.717buildbot # [ 6.905649] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.718buildbot # [ 6.907528] systemd[1]: Created slice Slice /system/getty.719buildbot # [ 6.908875] systemd[1]: Created slice User and Session Slice.720buildbot # [ 6.909695] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.721buildbot # [ 6.910856] systemd[1]: Started Forward Password Requests to Wall Directory Watch.722buildbot # [ 6.911858] systemd[1]: Expecting device /dev/hvc0...723buildbot # [ 6.912538] systemd[1]: Expecting device /dev/ttyS0...724buildbot # [ 6.913285] systemd[1]: Reached target Local Encrypted Volumes.725buildbot # [ 6.914090] systemd[1]: Stopped target initrd-fs.target.726buildbot # [ 6.914782] systemd[1]: Stopped target initrd-root-fs.target.727buildbot # [ 6.915478] systemd[1]: Stopped target initrd-switch-root.target.728buildbot # [ 6.916279] systemd[1]: Reached target Virtual Machines and Containers.729buildbot # [ 6.917133] systemd[1]: Reached target Path Units.730buildbot # [ 6.917784] systemd[1]: Reached target Remote File Systems.731buildbot # [ 6.918484] systemd[1]: Reached target Slice Units.732buildbot # [ 6.919163] systemd[1]: Reached target Swaps.733buildbot # [ 6.934523] systemd[1]: Listening on Query the User Interactively for a Password.734buildbot # [ 6.938695] systemd[1]: Listening on Process Core Dump Socket.735buildbot # [ 6.942031] systemd[1]: Listening on Credential Encryption/Decryption.736buildbot # [ 6.945048] systemd[1]: Listening on Factory Reset Management.737buildbot # [ 6.945902] systemd[1]: Listening on Hostname Service Socket.738buildbot # [ 6.950092] systemd[1]: Starting Journal Log Access Socket...739buildbot # [ 6.951940] systemd[1]: Listening on Journal Audit Socket.740buildbot # [ 6.955371] systemd[1]: Listening on Console Output Muting Service Socket.741buildbot # [ 6.956439] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.742buildbot # [ 6.957973] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os743buildbot # [ 6.959186] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki744buildbot # [ 6.970401] systemd[1]: Listening on Disk Repartitioning Service Socket.745buildbot # [ 6.971400] systemd[1]: Listening on udev Control Socket.746buildbot # [ 6.972299] systemd[1]: Listening on udev Varlink Socket.747buildbot # [ 6.976847] systemd[1]: Mounting Huge Pages File System...748buildbot # [ 6.980298] systemd[1]: Mounting POSIX Message Queue File System...749buildbot # [ 6.986018] systemd[1]: Mounting Kernel Debug File System...750buildbot # [ 6.992394] systemd[1]: Mounting Kernel Trace File System...751buildbot # [ 6.997945] systemd[1]: Starting Create List of Static Device Nodes...752buildbot # [ 7.000135] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio753buildbot # [ 7.007340] systemd[1]: Starting Load Kernel Module configfs...754buildbot # [ 7.011107] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm755buildbot # [ 7.014903] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore756buildbot # [ 7.017260] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse757buildbot # [ 7.023295] systemd[1]: Mounting FUSE Control File System...758buildbot # [ 7.025014] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67759buildbot # [ 7.035964] systemd[1]: Starting Journal Service...760buildbot # [ 7.053575] systemd[1]: Starting Load Kernel Modules...761buildbot # [ 7.086440] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...762buildbot # [ 7.101985] systemd[1]: Starting Remount Root and Kernel File Systems...763buildbot # [ 7.114431] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os764buildbot # [ 7.127978] systemd[1]: Starting Coldplug All udev Devices...765buildbot # [ 7.139286] systemd-journald[286]: Collecting audit messages is enabled.766buildbot # [ 7.142081] systemd[1]: Listening on Journal Log Access Socket.767buildbot # [ 7.149844] systemd[1]: Mounted Huge Pages File System.768buildbot # [ 7.154214] systemd[1]: Mounted POSIX Message Queue File System.769buildbot # [ 7.160371] systemd[1]: Mounted Kernel Debug File System.770buildbot # [ 7.163180] loop: module loaded771buildbot # [ 7.166287] systemd[1]: Mounted Kernel Trace File System.772buildbot # [ 7.173223] systemd[1]: Finished Create List of Static Device Nodes.773buildbot # [ 7.042636] systemd[1]: Queued start job for default target Multi-User System.774buildbot # [ 7.044291] systemd[1]: systemd-journald.service: Deactivated successfully.775buildbot # [ 7.180987] systemd[1]: Started Journal Service.776buildbot # [ 7.048463] systemd-modules-load[287]: Inserted module 'loop'777buildbot # [ 7.191632] EXT4-fs (vda): re-mounted bdf5fda3-db93-4678-9c9e-d12fd0fde767.778buildbot # [ 7.060234] systemd[1]: modprobe@configfs.service: Deactivated successfully.779buildbot # [ 7.063749] systemd[1]: Finished Load Kernel Module configfs.780buildbot # [ 7.064591] systemd[1]: Mounted FUSE Control File System.781buildbot # [ 7.067216] systemd-modules-load[287]: Inserted module 'tls'782buildbot # [ 7.071350] systemd[1]: Finished Remount Root and Kernel File Systems.783buildbot # [ 7.075134] systemd[1]: Finished Load Kernel Modules.784buildbot # [ 7.089082] systemd[1]: Listening on Disk Image Download Service Socket.785buildbot # [ 7.096517] systemd[1]: Mounting Kernel Configuration File System...786buildbot # [ 7.102885] systemd[1]: Starting Flush Journal to Persistent Storage...787buildbot # [ 7.103750] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore788buildbot # [ 7.114066] systemd[1]: Starting Load/Save OS Random Seed...789buildbot # [ 7.125087] systemd[1]: Starting Apply Kernel Variables...790buildbot # [ 7.136475] systemd-oomd[288]: No swap; memory pressure usage will be degraded791buildbot # [ 7.141444] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...792buildbot # [ 7.142478] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os793buildbot # [ 7.156346] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.794buildbot # [ 7.325301] systemd-journald[286]: Received client request to flush runtime journal.795buildbot # [ 7.288766] systemd[1]: Finished Load/Save OS Random Seed.796buildbot # [ 7.289735] systemd[1]: Reached target First Boot Complete.797buildbot # [ 7.290976] systemd[1]: Mounted Kernel Configuration File System.798buildbot # [ 7.293371] systemd[1]: Finished Apply Kernel Variables.799buildbot # [ 7.294166] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.800buildbot # [ 7.295367] systemd[1]: Starting Create Static Device Nodes in /dev...801buildbot # [ 7.298063] systemd[1]: Finished Flush Journal to Persistent Storage.802buildbot # [ 7.367073] systemd[1]: Finished Create Static Device Nodes in /dev.803buildbot # [ 7.368157] systemd[1]: Reached target Preparation for Local File Systems.804buildbot # [ 7.373575] systemd[1]: Starting Rule-based Manager for Device Events and Files...805buildbot # [ 7.388845] systemd[1]: Finished Coldplug All udev Devices.806buildbot # [ 7.448397] systemd-udevd[317]: Using default interface naming scheme 'v261'.807buildbot # [ 7.545780] systemd[1]: Started Rule-based Manager for Device Events and Files.808buildbot # [ 7.628331] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse809buildbot # [ 7.673079] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.810buildbot # [ 7.687876] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.811buildbot # [ 7.730549] (udev-worker)[327]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.812buildbot # [ 7.732777] (udev-worker)[327]: Network interface NamePolicy= disabled on kernel command line.813buildbot # [ 7.734285] (udev-worker)[321]: Network interface NamePolicy= disabled on kernel command line.814buildbot # [ 7.772152] systemd[1]: Mounting /run/wrappers...815buildbot # [ 7.812611] systemd[1]: Mounted /run/wrappers.816buildbot # [ 7.813662] systemd[1]: Reached target Local File Systems.817buildbot # [ 7.817071] systemd[1]: Listening on Boot Loader Control Service Socket.818buildbot # [ 7.820588] systemd[1]: Starting register-nix-paths.service...819buildbot # [ 7.825146] systemd[1]: Starting Create SUID/SGID Wrappers...820buildbot # [ 7.827066] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.821buildbot # [ 7.836501] systemd[1]: Starting Save Transient machine-id to Disk...822buildbot # [ 7.844312] systemd[1]: Starting Create System Files and Directories...823buildbot # [ 7.863473] systemd[1]: Condition check resulted in Virtio network device being skipped.824buildbot # [ 7.866792] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore825buildbot # [ 7.869908] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.826buildbot # [ 7.871599] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67827buildbot # [ 7.874717] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore828buildbot # [ 7.877681] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os829buildbot # [ 7.878764] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os830buildbot # [ 7.933902] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.831buildbot # [ 7.937430] systemd[1]: Finished Save Transient machine-id to Disk.832buildbot # [ 7.991325] systemd[1]: Finished Create System Files and Directories.833buildbot # [ 8.000602] systemd[1]: Starting Rebuild Journal Catalog...834buildbot # [ 8.010144] systemd[1]: Starting Record System Boot/Shutdown in UTMP...835buildbot # [ 8.194934] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console836buildbot # [ 8.201772] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3837buildbot # [ 8.075895] systemd[1]: Finished Record System Boot/Shutdown in UTMP.838buildbot # [ 8.124442] systemd[1]: Finished Rebuild Journal Catalog.839buildbot # [ 8.130548] systemd[1]: Starting Update is Completed...840buildbot # [ 8.183463] systemd[1]: Finished Update is Completed.841buildbot # [ 8.254265] ACPI: button: Power Button [PWRF]842buildbot # [ 8.255291] mousedev: PS/2 mouse device common for all mice843buildbot # [ 8.258771] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4844buildbot # [ 8.370846] rtc_cmos 00:04: RTC can wake from S4845buildbot # [ 8.395099] rtc_cmos 00:04: registered as rtc0846buildbot # [ 8.395167] rtc_cmos 00:04: setting system clock to 2026-08-23T03:03:21 UTC (1787454201)847buildbot # [ 8.395248] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs848buildbot # [ 8.396048] systemd-journald[286]: Time jumped backwards, rotating.849buildbot # [ 8.430452] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized850buildbot # [ 8.440543] parport_pc 00:02: reported by Plug and Play ACPI851buildbot # [ 8.440627] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]852buildbot # [ 8.444600] Console: switching to colour dummy device 80x25853buildbot # [ 8.561187] [drm] Found bochs VGA, ID 0xb0c5.854buildbot # [ 8.561189] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.855buildbot # [ 8.565379] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt856buildbot # [ 8.566066] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD857buildbot # [ 8.577120] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic858buildbot # [ 8.577763] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0859buildbot # [ 8.448120] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.860buildbot # [ 8.449665] systemd[1]: Finished Create SUID/SGID Wrappers.861buildbot # [ 8.639895] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6862buildbot # [ 8.640238] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5863buildbot # [ 8.714181] Console: switching to colour frame buffer device 160x50864buildbot # [ 8.619451] systemd[1]: Starting Virtual Console Setup...865buildbot # [ 8.781784] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device866buildbot # [ 8.661161] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.867buildbot # [ 8.662605] systemd[1]: Stopped Virtual Console Setup.868buildbot # [ 8.668710] systemd[1]: Starting Virtual Console Setup...869buildbot # [ 8.710557] systemd[1]: Finished register-nix-paths.service.870buildbot # [ 8.863458] ppdev: user-space parallel port driver871buildbot # [ 8.873869] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)872buildbot # [ 8.886445] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)873buildbot # [ 8.783284] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.874buildbot # [ 8.785133] systemd[1]: Stopped Virtual Console Setup.875buildbot # [ 8.793272] systemd[1]: Starting Virtual Console Setup...876buildbot # [ 9.004688] kvm_amd: TSC scaling supported877buildbot # [ 9.005192] kvm_amd: Nested Virtualization enabled878buildbot # [ 9.005655] kvm_amd: Nested Paging enabled879buildbot # [ 9.006430] kvm_amd: LBR virtualization supported880buildbot # [ 9.007086] kvm_amd: Virtual VMLOAD VMSAVE supported881buildbot # [ 9.007543] kvm_amd: Virtual GIF supported882buildbot # [ 9.008111] kvm_amd: Virtual NMI enabled883buildbot # [ 9.048478] EDAC MC: Ver: 3.0.0884buildbot # [ 9.297570] systemd-vconsole-setup[422]: Configuration of first virtual console was skipped, ignoring remaining ones.885buildbot # [ 9.301228] systemd[1]: Finished Virtual Console Setup.886buildbot # [ 9.302796] systemd[1]: Reached target System Initialization.887buildbot # [ 9.304558] systemd[1]: Started Discard unused filesystem blocks once a week.888buildbot # [ 9.305873] systemd[1]: Started Daily Cleanup of Temporary Directories.889buildbot # [ 9.306797] systemd[1]: Reached target Timer Units.890buildbot # [ 9.308153] systemd[1]: Listening on D-Bus System Message Bus Socket.891buildbot # [ 9.309104] systemd[1]: Listening on Nix Daemon Socket.892buildbot # [ 9.310100] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.893buildbot # [ 9.311840] systemd[1]: Reached target Socket Units.894buildbot # [ 9.312546] systemd[1]: Reached target Basic System.895buildbot # [ 9.315580] systemd[1]: Started backdoor.service.896buildbot # [ 9.317341] systemd[1]: Starting Import lastlog data into lastlog2 database...897buildbot # [ 9.320737] systemd[1]: Starting Name Service Cache Daemon (nsncd)...898buildbot # [ 9.328654] systemd[1]: Starting Post-Boot Actions...899buildbot # [ 9.336900] systemd[1]: Started Reset console on configuration changes.900buildbot # [ 9.345631] systemd[1]: Starting resolvconf update...901buildbot # [ 9.372416] systemd[1]: Starting D-Bus System Message Bus...902buildbot # [ 9.404432] systemd[1]: Finished Post-Boot Actions.903buildbot # [ 9.423528] nsncd[428]: Aug 23 03:03:22.659 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"904buildbot # [ 9.426081] systemd[1]: Started Name Service Cache Daemon (nsncd).905buildbot # [ 9.428700] systemd[1]: Reached target Host and Network Name Lookups.906buildbot # [ 9.431134] systemd[1]: Reached target User and Group Name Lookups.907buildbot # connecting to host...908buildbot # [ 9.443740] systemd[1]: Starting User Login Management...909buildbot # [ 9.468180] systemd[1]: Finished Import lastlog data into lastlog2 database.910buildbot: Guest shell says: b'Spawning backdoor root shell...\n'911buildbot: connected to guest root shell912buildbot: (connecting took 10.25 seconds)913buildbot: (finished: waiting for the VM to finish booting, in 10.56 seconds)914buildbot # [ 9.545284] dbus-broker-launch[433]: Looking up NSS user entry for 'systemd-timesync'...915buildbot # [ 9.565960] systemd-logind[452]: New seat seat0.916buildbot # [ 9.575433] systemd-logind[452]: Watching system buttons on /dev/input/event2 (Power Button)917buildbot # [ 9.576546] systemd-logind[452]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)918buildbot # [ 9.578395] systemd-logind[452]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)919buildbot # [ 9.583920] systemd[1]: Started User Login Management.920buildbot # [ 9.584667] dbus-broker-launch[433]: NSS returned no entry for 'systemd-timesync'921buildbot # [ 9.585544] dbus-broker-launch[433]: Invalid user-name in /nix/store/nirn4w35z77cmm8mqx82dim7n9590kzi-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"922buildbot # [ 9.593177] systemd[1]: Starting linger-users.service...923buildbot # [ 9.612955] systemd[1]: Stopped target Host and Network Name Lookups.924buildbot # [ 9.615127] systemd[1]: Stopping Host and Network Name Lookups...925buildbot # [ 9.617637] systemd[1]: Stopped target User and Group Name Lookups.926buildbot # [ 9.619806] systemd[1]: Stopping User and Group Name Lookups...927buildbot # [ 9.621219] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...928buildbot # [ 9.626434] systemd[1]: Started D-Bus System Message Bus.929buildbot # [ 9.662612] dbus-broker-launch[433]: Ready930buildbot # [ 9.665526] systemd[1]: nscd.service: Deactivated successfully.931buildbot # [ 9.667190] systemd[1]: Stopped Name Service Cache Daemon (nsncd).932buildbot # [ 9.672135] systemd[1]: linger-users.service: Deactivated successfully.933buildbot # [ 9.673636] systemd[1]: Finished linger-users.service.934buildbot # [ 9.686581] systemd[1]: Starting Name Service Cache Daemon (nsncd)...935buildbot # [ 9.704654] systemd[1]: Finished resolvconf update.936buildbot # [ 9.706193] systemd[1]: Reached target Preparation for Network.937buildbot # [ 9.713237] systemd[1]: Starting DHCP Client...938buildbot # [ 9.717151] systemd[1]: Starting Address configuration of eth1...939buildbot # [ 9.721978] systemd[1]: Starting Extra networking commands....940buildbot # [ 9.730684] nsncd[521]: Aug 23 03:03:22.967 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"941buildbot # [ 9.733313] systemd[1]: Started Name Service Cache Daemon (nsncd).942buildbot # [ 9.737367] systemd[1]: Reached target Host and Network Name Lookups.943buildbot # [ 9.739195] systemd[1]: Reached target User and Group Name Lookups.944buildbot # [ 9.828264] network-addresses-eth1-start[527]: adding address 192.168.1.1/24... done945buildbot # [ 9.845851] network-addresses-eth1-start[527]: adding address 2001:db8:1::1/64... done946buildbot # [ 9.868389] systemd[1]: Finished Address configuration of eth1.947buildbot # [ 9.892543] dhcpcd[545]: dhcpcd-10.3.2 starting948buildbot # [ 9.900882] dhcpcd[597]: dev: loaded udev949buildbot # [ 9.914940] systemd[1]: Finished Extra networking commands..950buildbot # [ 9.918166] systemd[1]: Reached target Network.951buildbot # [ 9.920908] systemd[1]: Starting gitea...952buildbot # [ 10.060534] 8021q: 802.1Q VLAN Support v1.8953buildbot # [ 9.928350] systemd[1]: Starting Nginx Web Server...954buildbot # [ 10.063771] 8021q: adding VLAN 0 to HW filter on device eth1955buildbot # [ 9.936766] systemd[1]: Starting PostgreSQL Server...956buildbot # [ 9.944990] systemd[1]: Starting Permit User Sessions...957buildbot # [ 9.981707] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.958buildbot # [ 10.019209] systemd[1]: Finished Permit User Sessions.959buildbot # [ 10.030992] systemd[1]: Started Getty on tty1.960buildbot # [ 10.031641] systemd[1]: Reached target Login Prompts.961buildbot # [ 10.255707] cfg80211: Loading compiled-in X.509 certificates for regulatory database962buildbot # [ 10.291169] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'963buildbot # [ 10.292088] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'964buildbot # [ 10.296477] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2965buildbot # [ 10.297550] cfg80211: failed to load regulatory.db966buildbot # [ 10.368674] 8021q: adding VLAN 0 to HW filter on device eth0967buildbot # [ 10.237801] dhcpcd[597]: eth0: waiting for carrier968buildbot # [ 10.239386] dhcpcd[597]: eth0: carrier acquired969buildbot # [ 10.256127] dhcpcd[597]: DUID 00:01:00:01:32:1d:1f:7b:52:54:00:12:34:56970buildbot # [ 10.256931] dhcpcd[597]: eth0: IAID 00:12:34:56971buildbot # [ 10.258830] dhcpcd[597]: eth0: adding address fe80::5054:ff:fe12:3456972buildbot # [ 10.280860] nginx-pre-start[620]: nginx: the configuration file /nix/store/lgfqgn5pr7s80d5pr2pa06h0i5ffxa29-nginx.conf syntax is ok973buildbot # [ 10.283615] nginx-pre-start[620]: nginx: configuration file /nix/store/lgfqgn5pr7s80d5pr2pa06h0i5ffxa29-nginx.conf test is successful974buildbot # [ 10.292906] systemd[1]: Started Nginx Web Server.975buildbot # [ 10.298294] postgresql-pre-start[625]: The files belonging to this database system will be owned by user "postgres".976buildbot # [ 10.300185] postgresql-pre-start[625]: This user must also own the server process.977buildbot # [ 10.311075] postgresql-pre-start[625]: The database cluster will be initialized with locale "en_US.UTF-8".978buildbot # [ 10.312408] postgresql-pre-start[625]: The default database encoding has accordingly been set to "UTF8".979buildbot # [ 10.313621] postgresql-pre-start[625]: The default text search configuration will be set to "english".980buildbot # [ 10.314819] postgresql-pre-start[625]: Data page checksums are enabled.981buildbot # [ 10.317212] postgresql-pre-start[625]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok982buildbot # [ 10.319303] postgresql-pre-start[625]: creating subdirectories ... ok983buildbot # [ 10.320742] postgresql-pre-start[625]: selecting dynamic shared memory implementation ... posix984buildbot # [ 10.434602] postgresql-pre-start[625]: selecting default "max_connections" ... 100985buildbot # [ 10.514227] postgresql-pre-start[625]: selecting default "shared_buffers" ... 128MB986buildbot # [ 10.586549] dhcpcd[597]: eth0: soliciting a DHCP lease987buildbot # [ 10.740323] NET: Registered PF_PACKET protocol family988buildbot # [ 10.611757] dhcpcd[597]: eth0: offered 10.0.2.15 from 10.0.2.2989buildbot # [ 10.614210] dhcpcd[597]: eth0: probing address 10.0.2.15/24990buildbot # [ 12.133641] dhcpcd[597]: eth0: soliciting an IPv6 router991buildbot # [ 12.136160] dhcpcd[597]: eth0: Router Advertisement from fe80::2992buildbot # [ 12.136854] dhcpcd[597]: eth0: adding address fec0::5054:ff:fe12:3456/64993buildbot # [ 12.138119] dhcpcd[597]: eth0: adding route to fec0::/64994buildbot # [ 12.138811] dhcpcd[597]: eth0: adding default route via fe80::2995buildbot # [ 12.229171] gitea-pre-start[679]: 2026/08/23 03:03:25 .../v3@v3.10.0/command_run.go:95:(*Command).Run() [I] PING DATABASE sqlite3996buildbot # [ 12.231083] gitea-pre-start[679]: 2026/08/23 03:03:25 cmd/migrate.go:31:runMigrate() [I] AppPath: /nix/store/hmnprw81idl7jcr8n06p0qsdwz6dhbsb-gitea-1.27.2/bin/gitea997buildbot # [ 12.234119] gitea-pre-start[679]: 2026/08/23 03:03:25 cmd/migrate.go:32:runMigrate() [I] AppWorkPath: /var/lib/gitea998buildbot # [ 12.235261] gitea-pre-start[679]: 2026/08/23 03:03:25 cmd/migrate.go:33:runMigrate() [I] Custom path: /var/lib/gitea/custom999buildbot # [ 12.236403] gitea-pre-start[679]: 2026/08/23 03:03:25 cmd/migrate.go:34:runMigrate() [I] Log path: /var/lib/gitea/log1000buildbot # [ 12.237556] gitea-pre-start[679]: 2026/08/23 03:03:25 cmd/migrate.go:35:runMigrate() [I] Configuration file: /var/lib/gitea/custom/conf/app.ini1001buildbot # [ 13.021585] postgresql-pre-start[625]: selecting default time zone ... UTC1002buildbot # [ 13.026435] postgresql-pre-start[625]: creating configuration files ... ok1003buildbot # [ 13.326497] postgresql-pre-start[625]: running bootstrap script ... ok1004buildbot # [ 14.031170] postgresql-pre-start[625]: performing post-bootstrap initialization ... ok1005buildbot # [ 14.526113] postgresql-pre-start[625]: syncing data to disk ... ok1006buildbot # [ 14.527687] postgresql-pre-start[625]: initdb: warning: enabling "trust" authentication for local connections1007buildbot # [ 14.529777] postgresql-pre-start[625]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1008buildbot # [ 14.531948] postgresql-pre-start[625]: Success. You can now start the database server using:1009buildbot # [ 14.532984] postgresql-pre-start[625]: pg_ctl -D /var/lib/postgresql/18 -l logfile start1010buildbot # [ 14.656266] postgres[707]: [707] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1011buildbot # [ 14.668718] postgres[707]: [707] LOG: listening on IPv6 address "::1", port 54321012buildbot # [ 14.669680] postgres[707]: [707] LOG: listening on IPv4 address "127.0.0.1", port 54321013buildbot # [ 14.673357] postgres[707]: [707] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1014buildbot # [ 14.687316] postgres[716]: [716] LOG: database system was shut down at 2026-08-23 03:03:27 GMT1015buildbot # [ 14.695980] postgres[707]: [707] LOG: database system is ready to accept connections1016buildbot # [ 14.702363] systemd[1]: Started PostgreSQL Server.1017buildbot # [ 14.708381] systemd[1]: Starting PostgreSQL Setup Scripts...1018buildbot # [ 14.975785] postgresql-setup-start[727]: CREATE DATABASE1019buildbot # [ 15.028334] postgresql-setup-start[736]: CREATE ROLE1020buildbot # [ 15.054839] postgresql-setup-start[738]: ALTER DATABASE1021buildbot # [ 15.059388] systemd[1]: Finished PostgreSQL Setup Scripts.1022buildbot # [ 15.061578] systemd[1]: Reached target PostgreSQL.1023buildbot # [ 16.387853] dhcpcd[597]: eth0: leased 10.0.2.15 for 86400 seconds1024buildbot # [ 16.389045] dhcpcd[597]: eth0: adding route to 10.0.2.0/241025buildbot # [ 16.390165] dhcpcd[597]: eth0: adding default route via 10.0.2.21026buildbot # [ 16.505877] systemd[1]: Started DHCP Client.1027buildbot # [ 16.801079] gitea[810]: 2026/08/23 03:03:30 cmd/web.go:263:runWeb() [I] Starting Gitea on PID: 8101028buildbot # [ 17.826403] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:115:showWebStartupMessage() [I] Gitea version: 1.27.2 built with go1.26.5 : sqlite, sqlite_unlock_notify1029buildbot # [ 17.828182] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:116:showWebStartupMessage() [I] * RunMode: prod1030buildbot # [ 17.829203] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:117:showWebStartupMessage() [I] * AppPath: /nix/store/hmnprw81idl7jcr8n06p0qsdwz6dhbsb-gitea-1.27.2/bin/gitea1031buildbot # [ 17.830738] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:118:showWebStartupMessage() [I] * WorkPath: /var/lib/gitea1032buildbot # [ 17.831879] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:119:showWebStartupMessage() [I] * CustomPath: /var/lib/gitea/custom1033buildbot # [ 17.833095] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:120:showWebStartupMessage() [I] * ConfigFile: /var/lib/gitea/custom/conf/app.ini1034buildbot # [ 17.834452] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:121:showWebStartupMessage() [I] Prepare to run web server1035buildbot # [ 18.041737] gitea[810]: 2026/08/23 03:03:31 routers/init.go:117:InitWebInstalled() [I] Git version: 2.55.0 (home: /var/lib/gitea/data/home)1036buildbot # [ 18.347693] gitea[810]: 2026/08/23 03:03:31 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.01037buildbot # [ 18.350431] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:227:initAttachments() [I] Initialising Attachment storage with type: local1038buildbot # [ 18.352077] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/attachments1039buildbot # [ 18.353513] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:217:initAvatars() [I] Initialising Avatar storage with type: local1040buildbot # [ 18.354760] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/avatars1041buildbot # [ 18.356132] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:243:initRepoAvatars() [I] Initialising Repository Avatar storage with type: local1042buildbot # [ 18.357626] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-avatars1043buildbot # [ 18.359796] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:249:initRepoArchives() [I] Initialising Repository Archive storage with type: local1044buildbot # [ 18.361279] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-archive1045buildbot # [ 18.362670] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:259:initPackages() [I] Initialising Packages storage with type: local1046buildbot # [ 18.363941] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/packages1047buildbot # [ 18.365347] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:270:initActions() [I] Initialising Actions storage with type: local1048buildbot # [ 18.366629] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_log1049buildbot # [ 18.368224] gitea[810]: 2026/08/23 03:03:31 modules/storage/storage.go:274:initActions() [I] Initialising ActionsArtifacts storage with type: local1050buildbot # [ 18.369908] gitea[810]: 2026/08/23 03:03:31 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_artifacts1051buildbot # [ 18.392980] gitea[810]: 2026/08/23 03:03:31 routers/common/db.go:22:InitDBEngine() [I] Beginning ORM engine initialization.1052buildbot # [ 18.394269] gitea[810]: 2026/08/23 03:03:31 routers/common/db.go:29:InitDBEngine() [I] ORM engine initialization attempt #1/10...1053buildbot # [ 18.395466] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:205:serveInstalled() [I] PING DATABASE sqlite31054buildbot # [ 18.459032] gitea[810]: 2026/08/23 03:03:31 cmd/web.go:205:serveInstalled() [W] Table system_setting Column version db default is , struct default is 11055buildbot # [ 18.493063] gitea[810]: 2026/08/23 03:03:31 routers/init.go:138:InitWebInstalled() [I] ORM engine initialization successful!1056buildbot # [ 18.899236] gitea[810]: 2026/08/23 03:03:32 routers/init.go:86:syncAppConfForGit() [I] AppPath changed from '' to '/nix/store/hmnprw81idl7jcr8n06p0qsdwz6dhbsb-gitea-1.27.2/bin/gitea'1057buildbot # [ 18.901281] gitea[810]: 2026/08/23 03:03:32 routers/init.go:91:syncAppConfForGit() [I] CustomConf changed from '' to '/var/lib/gitea/custom/conf/app.ini'1058buildbot # [ 18.902978] gitea[810]: 2026/08/23 03:03:32 routers/init.go:97:syncAppConfForGit() [I] re-sync repository hooks ...1059buildbot # [ 18.904385] gitea[810]: 2026/08/23 03:03:32 routers/init.go:100:syncAppConfForGit() [I] re-write ssh public keys ...1060buildbot # [ 18.905770] gitea[810]: 2026/08/23 03:03:32 .../indexer/issues/indexer.go:78:InitIssueIndexer.1() [I] PID 810: Initializing Issue Indexer: bleve1061buildbot # [ 18.907265] gitea[810]: 2026/08/23 03:03:32 .../indexer/stats/indexer.go:41:populateRepoIndexer() [I] Populating the repo stats indexer with existing repositories1062buildbot # [ 18.937172] gitea[810]: 2026/08/23 03:03:32 .../indexer/issues/indexer.go:155:InitIssueIndexer.2() [I] Issue Indexer Initialization took 69.321939ms1063buildbot # [ 19.931226] gitea[810]: 2026/08/23 03:03:33 cmd/web.go:329:listen() [I] Listen: http://0.0.0.0:37421064buildbot # [ 19.932404] gitea[810]: 2026/08/23 03:03:33 cmd/web.go:333:listen() [I] AppURL(ROOT_URL): http://localhost:3742/1065buildbot # [ 19.933581] gitea[810]: 2026/08/23 03:03:33 modules/graceful/server.go:52:NewServer() [I] Starting new Web server: tcp:0.0.0.0:3742 on PID: 8101066buildbot # [ 19.935607] systemd[1]: Started gitea.1067buildbot # [ 19.940217] systemd[1]: Starting Setup Gitea test environment...1068buildbot # [ 19.984741] setup-gitea-start[867]: + timeout 60 /nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin/bash -c 'until curl -s http://localhost:3742/api/v1/version; do sleep 1; done'1069buildbot # [ 20.085716] gitea[810]: 2026/08/23 03:03:33 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:58224, 200 OK in 12.7ms @ misc/version.go:15(misc.Version)1070buildbot # [ 20.087622] setup-gitea-start[870]: {"version":"1.27.2"}1071buildbot # [ 20.095491] setup-gitea-start[867]: + echo 'Gitea is ready'1072buildbot # [ 20.096258] setup-gitea-start[867]: Gitea is ready1073buildbot # [ 20.096823] setup-gitea-start[867]: + echo 'Creating admin user...'1074buildbot # [ 20.097547] setup-gitea-start[867]: Creating admin user...1075buildbot # [ 20.098184] setup-gitea-start[867]: + cd /var/lib/gitea1076buildbot # [ 20.098780] setup-gitea-start[867]: + runuser -u gitea -- env GITEA_WORK_DIR=/var/lib/gitea GITEA_CUSTOM=/var/lib/gitea/custom /nix/store/hmnprw81idl7jcr8n06p0qsdwz6dhbsb-gitea-1.27.2/bin/gitea admin user create --config /var/lib/gitea/custom/conf/app.ini --username gitea-admin --password testpassword123 --email admin@example.com --admin --must-change-password=false1077buildbot # [ 20.133795] runuser[871]: pam_unix(runuser:session): session opened for user gitea(uid=996) by (uid=0)1078buildbot: (finished: waiting for unit gitea.service, in 21.28 seconds)1079buildbot: waiting for unit setup-gitea.service1080buildbot # [ 20.319387] setup-gitea-start[872]: 2026/08/23 03:03:33 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.01081buildbot # [ 20.336708] setup-gitea-start[872]: New user 'gitea-admin' has been successfully created!1082buildbot # [ 20.342715] runuser[871]: pam_unix(runuser:session): session closed for user gitea1083buildbot # [ 20.345839] setup-gitea-start[867]: + USER_CREATE_RESULT=01084buildbot # [ 20.346534] setup-gitea-start[867]: + '[' 0 -ne 0 ']'1085buildbot # [ 20.347282] setup-gitea-start[867]: + echo 'Verifying user exists via API...'1086buildbot # [ 20.348083] setup-gitea-start[867]: Verifying user exists via API...1087buildbot # [ 20.348837] setup-gitea-start[867]: + for i in {1..10}1088buildbot # [ 20.350308] setup-gitea-start[886]: ++ curl -s -u gitea-admin:testpassword123 http://localhost:3742/api/v1/user1089buildbot # [ 20.422666] gitea[810]: 2026/08/23 03:03:33 HTTPRequest [I] router: completed GET /api/v1/user for [::1]:58234, 200 OK in 41.3ms @ user/user.go:127(user.GetAuthenticatedUser)1090buildbot # [ 20.428076] setup-gitea-start[867]: + USER_CHECK='{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'1091buildbot # [ 20.441886] setup-gitea-start[888]: + echo '{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'1092buildbot # [ 20.447076] setup-gitea-start[889]: + grep -q '"username":"gitea-admin"'1093buildbot # [ 20.451344] setup-gitea-start[867]: + echo 'User verified to exist!'1094buildbot # [ 20.452092] setup-gitea-start[867]: User verified to exist!1095buildbot # [ 20.452724] setup-gitea-start[867]: + break1096buildbot # [ 20.453249] setup-gitea-start[867]: + echo 'Creating access token...'1097buildbot # [ 20.453957] setup-gitea-start[867]: Creating access token...1098buildbot # [ 20.455311] setup-gitea-start[890]: ++ curl -v -X POST -H 'Content-Type: application/json' -d '{"name":"buildbot-token","scopes":["write:repository","write:user","write:admin","write:organization"]}' -u gitea-admin:testpassword123 http://localhost:3742/api/v1/users/gitea-admin/tokens1099buildbot # [ 20.522681] gitea[810]: 2026/08/23 03:03:33 HTTPRequest [I] router: completed POST /api/v1/users/gitea-admin/tokens for [::1]:58248, 201 Created in 33.5ms @ user/app.go:75(user.CreateAccessToken)1100buildbot # [ 20.529967] setup-gitea-start[867]: + TOKEN_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58248 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:33 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 6808 2646 0\r100 368 100 265 100 103 6726 2614 0\r100 368 100 265 100 103 6719 2611 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"f7260c114bc3ae87ea516d121a164cdc3591cc60","token_last_eight":"3591cc60","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1101buildbot # [ 20.544394] setup-gitea-start[867]: + echo $'Token response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58248 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:33 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 6808 2646 0\r100 368 100 265 100 103 6726 2614 0\r100 368 100 265 100 103 6719 2611 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"f7260c114bc3ae87ea516d121a164cdc3591cc60","token_last_eight":"3591cc60","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1102buildbot # [ 20.558605] setup-gitea-start[867]: Token response: Note: Unnecessary use of -X or --request, POST is already inferred.1103buildbot # [ 20.559731] setup-gitea-start[867]: * Host localhost:3742 was resolved.1104buildbot # [ 20.560530] setup-gitea-start[867]: * IPv6: ::11105buildbot # [ 20.561076] setup-gitea-start[867]: * IPv4: 127.0.0.11106buildbot # [ 20.561656] setup-gitea-start[867]: * Trying [::1]:3742...1107buildbot # [ 20.563350] setup-gitea-start[867]: * Established connection to localhost (::1 port 3742) from ::1 port 582481108buildbot # [ 20.564518] setup-gitea-start[867]: % Total % Received % Xferd Average Speed Time Time Time Current1109buildbot # [ 20.565756] setup-gitea-start[867]: Dload Upload Total Spent Left Speed1110buildbot # [ 20.566865] setup-gitea-start[867]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1111buildbot # [ 20.568288] setup-gitea-start[867]: * Server auth using Basic with user 'gitea-admin'1112buildbot # [ 20.569313] setup-gitea-start[867]: > POST /api/v1/users/gitea-admin/tokens HTTP/1.11113buildbot # [ 20.570391] setup-gitea-start[867]: > Host: localhost:37421114buildbot # [ 20.571140] setup-gitea-start[867]: > Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz1115buildbot # [ 20.572571] setup-gitea-start[867]: > User-Agent: curl/8.21.01116buildbot # [ 20.573290] setup-gitea-start[867]: > Accept: */*1117buildbot # [ 20.573837] setup-gitea-start[867]: > Content-Type: application/json1118buildbot # [ 20.574609] setup-gitea-start[867]: > Content-Length: 1031119buildbot # [ 20.575359] setup-gitea-start[867]: >1120buildbot # [ 20.576075] setup-gitea-start[867]: } [103 bytes data]1121buildbot # [ 20.576679] setup-gitea-start[867]: * upload completely sent off: 103 bytes1122buildbot # [ 20.577496] setup-gitea-start[867]: < HTTP/1.1 201 Created1123buildbot # [ 20.578248] setup-gitea-start[867]: < Cache-Control: max-age=0, private, must-revalidate1124buildbot # [ 20.579385] setup-gitea-start[867]: < Content-Type: application/json;charset=utf-81125buildbot # [ 20.580311] setup-gitea-start[867]: < X-Content-Type-Options: nosniff1126buildbot # [ 20.581403] setup-gitea-start[867]: < X-Frame-Options: SAMEORIGIN1127buildbot # [ 20.582121] setup-gitea-start[867]: < Date: Sun, 23 Aug 2026 03:03:33 GMT1128buildbot # [ 20.583068] setup-gitea-start[867]: < Content-Length: 2651129buildbot # [ 20.583943] setup-gitea-start[867]: <1130buildbot # [ 20.584520] setup-gitea-start[867]: { [265 bytes data]1131buildbot # [ 20.585365] setup-gitea-start[867]: 100 368 100 265 100 103 6808 2646 0100 368 100 265 100 103 6726 2614 0100 368 100 265 100 103 6719 2611 01132buildbot # [ 20.587799] setup-gitea-start[867]: * Connection #0 to host localhost:3742 left intact1133buildbot # [ 20.588739] setup-gitea-start[867]: {"id":1,"name":"buildbot-token","sha1":"f7260c114bc3ae87ea516d121a164cdc3591cc60","token_last_eight":"3591cc60","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}1134buildbot # [ 20.591955] setup-gitea-start[893]: ++ echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58248 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:33 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 6808 2646 0\r100 368 100 265 100 103 6726 2614 0\r100 368 100 265 100 103 6719 2611 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"f7260c114bc3ae87ea516d121a164cdc3591cc60","token_last_eight":"3591cc60","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1135buildbot # [ 20.606491] setup-gitea-start[894]: ++ grep -o '"sha1":"[^"]*'1136buildbot # [ 20.607604] setup-gitea-start[895]: ++ cut '-d"' -f41137buildbot # [ 20.613505] setup-gitea-start[867]: + TOKEN=f7260c114bc3ae87ea516d121a164cdc3591cc601138buildbot # [ 20.614506] setup-gitea-start[867]: + '[' -z f7260c114bc3ae87ea516d121a164cdc3591cc60 ']'1139buildbot # [ 20.615494] setup-gitea-start[867]: + echo 'Token created successfully: f7260c114b...'1140buildbot # [ 20.616484] setup-gitea-start[867]: Token created successfully: f7260c114b...1141buildbot # [ 20.617377] setup-gitea-start[867]: + mkdir -p /var/lib/buildbot1142buildbot # [ 20.625980] setup-gitea-start[867]: + echo f7260c114bc3ae87ea516d121a164cdc3591cc601143buildbot # [ 20.626948] setup-gitea-start[867]: + chmod 644 /var/lib/buildbot/gitea-token1144buildbot # [ 20.636309] setup-gitea-start[867]: + echo f7260c114bc3ae87ea516d121a164cdc3591cc601145buildbot # [ 20.637183] setup-gitea-start[867]: + echo 'Creating repository test-flake...'1146buildbot # [ 20.637952] setup-gitea-start[867]: Creating repository test-flake...1147buildbot # [ 20.639330] setup-gitea-start[898]: ++ curl -v -X POST -H 'Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60' -H 'Content-Type: application/json' -H 'accept: application/json' -d '{"name":"test-flake","private":false}' http://localhost:3742/api/v1/user/repos1148buildbot # [ 20.838348] gitea[810]: 2026/08/23 03:03:34 HTTPRequest [I] router: completed POST /api/v1/user/repos for [::1]:58252, 201 Created in 164.6ms @ repo/repo.go:280(repo.Create)1149buildbot # [ 20.844593] setup-gitea-start[867]: + REPO_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58252 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:34 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 14081 221 0\r100 2391 0 2354 100 37 14048 220 0\r100 2391 0 2354 100 37 14016 220 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:03:33Z","updated_at":"2026-08-23T03:03:34Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1150buildbot # [ 20.875074] setup-gitea-start[867]: + echo $'Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58252 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:34 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 14081 221 0\r100 2391 0 2354 100 37 14048 220 0\r100 2391 0 2354 100 37 14016 220 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:03:33Z","updated_at":"2026-08-23T03:03:34Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1151buildbot # [ 20.905636] setup-gitea-start[867]: Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.1152buildbot # [ 20.907198] setup-gitea-start[867]: * Host localhost:3742 was resolved.1153buildbot # [ 20.907909] setup-gitea-start[867]: * IPv6: ::11154buildbot # [ 20.909088] setup-gitea-start[867]: * IPv4: 127.0.0.11155buildbot # [ 20.909693] setup-gitea-start[867]: * Trying [::1]:3742...1156buildbot # [ 20.910362] setup-gitea-start[867]: * Established connection to localhost (::1 port 3742) from ::1 port 582521157buildbot # [ 20.911617] setup-gitea-start[867]: % Total % Received % Xferd Average Speed Time Time Time Current1158buildbot # [ 20.912714] setup-gitea-start[867]: Dload Upload Total Spent Left Speed1159buildbot # [ 20.913777] setup-gitea-start[867]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1160buildbot # [ 20.914974] setup-gitea-start[867]: > POST /api/v1/user/repos HTTP/1.11161buildbot # [ 20.915761] setup-gitea-start[867]: > Host: localhost:37421162buildbot # [ 20.916393] setup-gitea-start[867]: > User-Agent: curl/8.21.01163buildbot # [ 20.917026] setup-gitea-start[867]: > Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc601164buildbot # [ 20.917959] setup-gitea-start[867]: > Content-Type: application/json1165buildbot # [ 20.919153] setup-gitea-start[867]: > accept: application/json1166buildbot # [ 20.919856] setup-gitea-start[867]: > Content-Length: 371167buildbot # [ 20.920696] setup-gitea-start[867]: >1168buildbot # [ 20.921271] setup-gitea-start[867]: } [37 bytes data]1169buildbot # [ 20.922304] setup-gitea-start[867]: * upload completely sent off: 37 bytes1170buildbot # [ 20.923132] setup-gitea-start[867]: < HTTP/1.1 201 Created1171buildbot # [ 20.923817] setup-gitea-start[867]: < Cache-Control: max-age=0, private, must-revalidate1172buildbot # [ 20.925030] setup-gitea-start[867]: < Content-Type: application/json;charset=utf-81173buildbot # [ 20.925884] setup-gitea-start[867]: < X-Content-Type-Options: nosniff1174buildbot # [ 20.926630] setup-gitea-start[867]: < X-Frame-Options: SAMEORIGIN1175buildbot # [ 20.927558] setup-gitea-start[867]: < Date: Sun, 23 Aug 2026 03:03:34 GMT1176buildbot # [ 20.928460] setup-gitea-start[867]: < Transfer-Encoding: chunked1177buildbot # [ 20.929686] setup-gitea-start[867]: <1178buildbot # [ 20.930263] setup-gitea-start[867]: { [2366 bytes data]1179buildbot # [ 20.930852] setup-gitea-start[867]: 100 2391 0 2354 100 37 14081 221 0100 2391 0 2354 100 37 14048 220 0100 2391 0 2354 100 37 14016 220 01180buildbot # [ 20.933302] setup-gitea-start[867]: * Connection #0 to host localhost:3742 left intact1181buildbot # [ 20.934382] setup-gitea-start[867]: {"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:03:33Z","updated_at":"2026-08-23T03:03:34Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}1182buildbot # [ 20.953938] setup-gitea-start[905]: + echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58252 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:34 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 14081 221 0\r100 2391 0 2354 100 37 14048 220 0\r100 2391 0 2354 100 37 14016 220 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:03:33Z","updated_at":"2026-08-23T03:03:34Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1183buildbot # [ 20.985141] setup-gitea-start[906]: + grep -q '"id"'1184buildbot # [ 20.991137] setup-gitea-start[867]: + echo 'Repository created successfully'1185buildbot # [ 20.991936] setup-gitea-start[867]: Repository created successfully1186buildbot # [ 20.992654] setup-gitea-start[867]: + echo 'Adding buildbot-nix topic to repository...'1187buildbot # [ 20.993518] setup-gitea-start[867]: Adding buildbot-nix topic to repository...1188buildbot # [ 20.994941] setup-gitea-start[907]: ++ curl -v -X PUT -H 'Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60' -H 'Content-Type: application/json' -d '{"topics":["buildbot-nix"]}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/topics1189buildbot # [ 21.052487] gitea[810]: 2026/08/23 03:03:34 HTTPRequest [I] router: completed PUT /api/v1/repos/gitea-admin/test-flake/topics for [::1]:58260, 204 No Content in 25.2ms @ repo/topic.go:75(repo.UpdateTopics)1190buildbot # [ 21.060096] setup-gitea-start[867]: + TOPIC_RESPONSE=$'* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58260 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:34 GMT\r\n< \r\n\r100 27 0 0 100 27 0 1023 0\r100 27 0 0 100 27 0 930 0\r100 27 0 0 100 27 0 915 0\n* Connection #0 to host localhost:3742 left intact'1191buildbot # [ 21.070580] setup-gitea-start[867]: + echo $'Topic response: * Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58260 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 23 Aug 2026 03:03:34 GMT\r\n< \r\n\r100 27 0 0 100 27 0 1023 0\r100 27 0 0 100 27 0 930 0\r100 27 0 0 100 27 0 915 0\n* Connection #0 to host localhost:3742 left intact'1192buildbot # [ 21.083200] setup-gitea-start[867]: Topic response: * Host localhost:3742 was resolved.1193buildbot # [ 21.084111] setup-gitea-start[867]: * IPv6: ::11194buildbot # [ 21.084713] setup-gitea-start[867]: * IPv4: 127.0.0.11195buildbot # [ 21.085459] setup-gitea-start[867]: * Trying [::1]:3742...1196buildbot # [ 21.086220] setup-gitea-start[867]: * Established connection to localhost (::1 port 3742) from ::1 port 582601197buildbot # [ 21.087425] setup-gitea-start[867]: % Total % Received % Xferd Average Speed Time Time Time Current1198buildbot # [ 21.088635] setup-gitea-start[867]: Dload Upload Total Spent Left Speed1199buildbot # [ 21.089837] setup-gitea-start[867]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1200buildbot # [ 21.091151] setup-gitea-start[867]: > PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.11201buildbot # [ 21.092163] setup-gitea-start[867]: > Host: localhost:37421202buildbot # [ 21.092862] setup-gitea-start[867]: > User-Agent: curl/8.21.01203buildbot # [ 21.093898] setup-gitea-start[867]: > Accept: */*1204buildbot # [ 21.094688] setup-gitea-start[867]: > Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc601205buildbot # [ 21.095779] setup-gitea-start[867]: > Content-Type: application/json1206buildbot # [ 21.096592] setup-gitea-start[867]: > Content-Length: 271207buildbot # [ 21.097467] setup-gitea-start[867]: >1208buildbot # [ 21.097988] setup-gitea-start[867]: } [27 bytes data]1209buildbot # [ 21.099173] setup-gitea-start[867]: * upload completely sent off: 27 bytes1210buildbot # [ 21.100072] setup-gitea-start[867]: < HTTP/1.1 204 No Content1211buildbot # [ 21.100787] setup-gitea-start[867]: < Cache-Control: max-age=0, private, must-revalidate1212buildbot # [ 21.101931] setup-gitea-start[867]: < X-Content-Type-Options: nosniff1213buildbot # [ 21.102763] setup-gitea-start[867]: < X-Frame-Options: SAMEORIGIN1214buildbot # [ 21.103543] setup-gitea-start[867]: < Date: Sun, 23 Aug 2026 03:03:34 GMT1215buildbot # [ 21.104562] setup-gitea-start[867]: <1216buildbot # [ 21.105128] setup-gitea-start[867]: 100 27 0 0 100 27 0 1023 0100 27 0 0 100 27 0 930 0100 27 0 0 100 27 0 915 01217buildbot # [ 21.107888] setup-gitea-start[867]: * Connection #0 to host localhost:3742 left intact1218buildbot # [ 21.108940] setup-gitea-start[867]: + rm -rf /tmp/test-flake1219buildbot # [ 21.112699] setup-gitea-start[867]: + mkdir -p /tmp/test-flake1220buildbot # [ 21.120523] setup-gitea-start[867]: + cd /tmp/test-flake1221buildbot # [ 21.121274] setup-gitea-start[867]: + git init1222buildbot # [ 21.151247] setup-gitea-start[911]: hint: Using 'master' as the name for the initial branch. This default branch name1223buildbot # [ 21.152433] setup-gitea-start[911]: hint: will change to "main" in Git 3.0. To configure the initial branch name1224buildbot # [ 21.153529] setup-gitea-start[911]: hint: to use in all of your new repositories, which will suppress this warning,1225buildbot # [ 21.154668] setup-gitea-start[911]: hint: call:1226buildbot # [ 21.155257] setup-gitea-start[911]: hint:1227buildbot # [ 21.155747] setup-gitea-start[911]: hint: git config --global init.defaultBranch <name>1228buildbot # [ 21.156704] setup-gitea-start[911]: hint:1229buildbot # [ 21.157307] setup-gitea-start[911]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and1230buildbot # [ 21.158459] setup-gitea-start[911]: hint: 'development'. The just-created branch can be renamed via this command:1231buildbot # [ 21.159642] setup-gitea-start[911]: hint:1232buildbot # [ 21.160208] setup-gitea-start[911]: hint: git branch -m <name>1233buildbot # [ 21.160950] setup-gitea-start[911]: hint:1234buildbot # [ 21.161523] setup-gitea-start[911]: hint: Disable this message with "git config set advice.defaultBranchName false"1235buildbot # [ 21.162770] setup-gitea-start[911]: Initialized empty Git repository in /tmp/test-flake/.git/1236buildbot # [ 21.164056] setup-gitea-start[867]: + git config user.name 'Test User'1237buildbot # [ 21.174042] setup-gitea-start[867]: + git config user.email test@example.com1238buildbot # [ 21.183758] setup-gitea-start[867]: + cat1239buildbot # [ 21.193795] setup-gitea-start[867]: + cat1240buildbot # [ 21.201582] setup-gitea-start[867]: + git add flake.nix buildbot-nix.toml1241buildbot # [ 21.222393] setup-gitea-start[867]: + git commit -m 'Initial commit'1242buildbot # [ 21.275519] setup-gitea-start[917]: [master (root-commit) 6dc6325] Initial commit1243buildbot # [ 21.276511] setup-gitea-start[917]: 2 files changed, 24 insertions(+)1244buildbot # [ 21.277293] setup-gitea-start[917]: create mode 100644 buildbot-nix.toml1245buildbot # [ 21.278036] setup-gitea-start[917]: create mode 100644 flake.nix1246buildbot # [ 21.280353] setup-gitea-start[867]: + echo 'Verifying repository exists...'1247buildbot # [ 21.281149] setup-gitea-start[867]: Verifying repository exists...1248buildbot # [ 21.282334] setup-gitea-start[920]: ++ curl -s -H 'Authorization: token f7260c114bc3ae87ea516d121a164cdc3591cc60' http://localhost:3742/api/v1/repos/gitea-admin/test-flake1249buildbot # [ 21.334873] gitea[810]: 2026/08/23 03:03:34 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake for [::1]:58262, 200 OK in 21.3ms @ repo/repo.go:498(repo.Get)1250buildbot # [ 21.341164] setup-gitea-start[867]: + REPO_CHECK='{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:03:33Z","updated_at":"2026-08-23T03:03:34Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1251buildbot # [ 21.361538] setup-gitea-start[925]: + echo '{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-23T03:03:33Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-23T03:03:33Z","updated_at":"2026-08-23T03:03:34Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1252buildbot # [ 21.381604] setup-gitea-start[926]: + grep -q '"id"'1253buildbot # [ 21.392891] setup-gitea-start[867]: + echo 'Repository confirmed to exist, pushing code...'1254buildbot # [ 21.393849] setup-gitea-start[867]: Repository confirmed to exist, pushing code...1255buildbot # [ 21.394900] setup-gitea-start[867]: + git remote add origin http://gitea-admin:testpassword123@localhost:3742/gitea-admin/test-flake.git1256buildbot # [ 21.411112] setup-gitea-start[867]: + git push -u origin master1257buildbot # [ 21.496313] gitea[810]: 2026/08/23 03:03:34 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:58276, 401 Unauthorized in 2.6ms @ repo/githttp.go:455(repo.GetInfoRefs)1258buildbot # [ 21.529590] gitea[810]: 2026/08/23 03:03:34 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:58276, 200 OK in 30.4ms @ repo/githttp.go:455(repo.GetInfoRefs)1259buildbot # [ 21.788289] gitea[810]: 2026/08/23 03:03:35 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 5.5ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1260buildbot # [ 22.114773] gitea[810]: 2026/08/23 03:03:35 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 65.1ms @ private/hook_post_receive.go:101(private.HookPostReceive)1261buildbot # [ 22.134300] gitea[810]: 2026/08/23 03:03:35 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:58276, 200 OK in 571.7ms @ repo/githttp.go:438(repo.ServiceReceivePack)1262buildbot # [ 22.139151] setup-gitea-start[928]: To http://localhost:3742/gitea-admin/test-flake.git1263buildbot # [ 22.140034] setup-gitea-start[928]: * [new branch] master -> master1264buildbot # [ 22.147942] setup-gitea-start[928]: branch 'master' set up to track 'origin/master'.1265buildbot # [ 22.151926] systemd[1]: Finished Setup Gitea test environment.1266buildbot # [ 22.156419] systemd[1]: Starting Buildbot Continuous Integration Server....1267buildbot # [ 22.218433] buildbot-master-pre-start[988]: mkdir: created directory '/var/lib/buildbot/master'1268buildbot: (finished: waiting for unit setup-gitea.service, in 2.19 seconds)1269buildbot: waiting for unit multi-user.target1270buildbot # [ 28.247422] buildbot-master-pre-start[990]: updating existing installation1271buildbot # [ 28.248345] buildbot-master-pre-start[990]: not touching existing buildbot.tac1272buildbot # [ 28.249136] buildbot-master-pre-start[990]: creating buildbot.tac.new instead1273buildbot # [ 28.249887] buildbot-master-pre-start[990]: creating /var/lib/buildbot/master/master.cfg.sample1274buildbot # [ 28.251066] buildbot-master-pre-start[990]: creating database (postgresql://@/buildbot)1275buildbot # [ 28.251946] buildbot-master-pre-start[990]: buildmaster configured in /var/lib/buildbot/master1276buildbot # [ 28.456936] systemd[1]: Started Buildbot Continuous Integration Server..1277buildbot # [ 28.462509] systemd[1]: Started Buildbot Worker..1278buildbot # [ 28.463504] systemd[1]: Reached target Multi-User System.1279buildbot # [ 28.464601] systemd[1]: Startup finished in 851ms (kernel) + 4.146s (initrd) + 23.466s (userspace) = 28.464s.1280buildbot: (finished: waiting for unit multi-user.target, in 6.61 seconds)1281subtest: Gitea service is accessible1282buildbot: waiting for TCP port 3742 on localhost1283buildbot # Connection to localhost (::1) 3742 port [tcp/cst-port] succeeded!1284buildbot: (finished: waiting for TCP port 3742 on localhost, in 0.09 seconds)1285??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1286 File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391287buildbot: waiting for success: curl --fail http://localhost:3742/api/v1/version1288??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1289 File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391290buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1291buildbot # Dload Upload Total Spent Left Speed1292buildbot # 0 0 0 0 0 0 0 0 0100 21 100 21 [ 29.183164] gitea[810]: 2026/08/23 03:03:42 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:32858, 200 OK in 0.6ms @ misc/version.go:15(misc.Version)1293buildbot # 0 0 677 0 0100 21 100 21 0 0 499 0 0100 21 100 21 0 0 405 0 01294buildbot: (finished: waiting for success: curl --fail http://localhost:3742/api/v1/version, in 0.13 seconds)1295(finished: subtest: Gitea service is accessible, in 0.22 seconds)1296subtest: Gitea token was created1297buildbot: must succeed: test -f /var/lib/buildbot/gitea-token1298buildbot: (finished: must succeed: test -f /var/lib/buildbot/gitea-token, in 0.02 seconds)1299buildbot: must succeed: cat /tmp/gitea-token1300buildbot: (finished: must succeed: cat /tmp/gitea-token, in 0.03 seconds)1301(finished: subtest: Gitea token was created, in 0.05 seconds)1302subtest: Master and worker services start1303buildbot: waiting for unit buildbot-master.service1304buildbot: (finished: waiting for unit buildbot-master.service, in 0.07 seconds)1305buildbot: waiting for unit buildbot-worker.service1306buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds)1307buildbot: waiting for TCP port 8010 on localhost1308buildbot # [ 30.031111] twistd[1074]: Starting worker local-worker-0001309buildbot # [ 30.031855] twistd[1074]: 2026-08-23T03:03:42+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1310buildbot # [ 30.033260] twistd[1074]: 2026-08-23T03:03:43+0000 [-] Loaded.1311buildbot # [ 30.033908] twistd[1074]: 2026-08-23T03:03:43+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14 3.14.7) starting up.1312buildbot # [ 30.036196] twistd[1074]: 2026-08-23T03:03:43+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1313buildbot # [ 30.038081] twistd[1074]: 2026-08-23T03:03:43+0000 [-] Starting Worker -- version: 2026.08.231314buildbot # [ 30.039079] twistd[1074]: 2026-08-23T03:03:43+0000 [-] recording hostname in twistd.hostname1315buildbot # [ 30.040084] twistd[1074]: 2026-08-23T03:03:43+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x725fa4118050>1316buildbot # [ 30.049821] twistd[1074]: 2026-08-23T03:03:43+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x725fa4118590> in 2.196420231480555 seconds.1317buildbot # [ 30.051978] twistd[1074]: 2026-08-23T03:03:43+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x725fa4118050>1318buildbot # [ 31.905979] twistd[1073]: 2026-08-23T03:03:42+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1319buildbot # [ 31.907685] twistd[1073]: 2026-08-23T03:03:45+0000 [-] Loaded.1320buildbot # [ 31.908486] twistd[1073]: 2026-08-23T03:03:45+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14 3.14.7) starting up.1321buildbot # [ 31.910431] twistd[1073]: 2026-08-23T03:03:45+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1322buildbot # [ 31.911973] twistd[1073]: 2026-08-23T03:03:45+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01323buildbot # [ 31.922766] twistd[1073]: 2026-08-23T03:03:45+0000 [-] Loading configuration from '/nix/store/81i9hbhd1izrch0ajjp1bjhjrqiw8msk-master.cfg'1324buildbot # [ 32.249348] twistd[1074]: 2026-08-23T03:03:45+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x725fa4118050>1325buildbot # [ 32.253105] twistd[1074]: 2026-08-23T03:03:45+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x725fa4118590> in 3.057871043704286 seconds.1326buildbot # [ 32.255327] twistd[1074]: 2026-08-23T03:03:45+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x725fa4118050>1327buildbot # [ 32.857927] twistd[1073]: 2026-08-23T03:03:46+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1328buildbot # [ 32.954918] twistd[1073]: 2026-08-23T03:03:46+0000 [-] adding 2 new builders, removing 01329buildbot # [ 32.979087] twistd[1073]: 2026-08-23T03:03:46+0000 [-] adding 4 new services, removing 01330buildbot # [ 33.092883] twistd[1073]: 2026-08-23T03:03:46+0000 [-] adding 4 new schedulers, removing 01331buildbot # [ 33.108182] twistd[1073]: 2026-08-23T03:03:46+0000 [-] PeriodicWithStartup scheduler <reload-gitea-projects-bidaily>: missed scheduled build time - building immediately1332buildbot # [ 33.146985] twistd[1073]: 2026-08-23T03:03:46+0000 [-] added buildset 1 to database1333buildbot # [ 33.169887] twistd[1073]: 2026-08-23T03:03:46+0000 [-] BuildbotSite starting on 80101334buildbot # [ 33.170853] twistd[1073]: 2026-08-23T03:03:46+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x7dc4dc464050>1335buildbot # [ 33.172392] twistd[1073]: 2026-08-23T03:03:46+0000 [-] adding 5 new workers, removing 01336buildbot # [ 33.181981] twistd[1073]: 2026-08-23T03:03:46+0000 [-] PBServerFactory starting on 99891337buildbot # [ 33.183303] twistd[1073]: 2026-08-23T03:03:46+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x7dc4dc464ad0>1338buildbot # [ 33.214126] twistd[1073]: 2026-08-23T03:03:46+0000 [-] Starting Worker -- version: 2026.08.231339buildbot # [ 33.215514] twistd[1073]: 2026-08-23T03:03:46+0000 [-] recording hostname in twistd.hostname1340buildbot # [ 33.216498] twistd[1073]: 2026-08-23T03:03:46+0000 [-] message from master: attached1341buildbot # [ 33.218640] twistd[1073]: 2026-08-23T03:03:46+0000 [-] Got workerinfo from '__Janitor'1342buildbot # [ 33.225242] twistd[1073]: 2026-08-23T03:03:46+0000 [-] bot attached1343buildbot # [ 33.226815] twistd[1073]: 2026-08-23T03:03:46+0000 [-] Worker __Janitor attached to __Janitor1344buildbot # [ 33.227763] twistd[1073]: 2026-08-23T03:03:46+0000 [-] message from master: attached1345buildbot # [ 33.254613] twistd[1073]: 2026-08-23T03:03:46+0000 [-] BuildMaster is running1346buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1347buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.26 seconds)1348buildbot: waiting for success: curl --fail -v --head http://localhost:80101349buildbot # * Host localhost:8010 was resolved.1350buildbot # * IPv6: ::11351buildbot # * IPv4: 127.0.0.11352buildbot # * Trying [::1]:8010...1353buildbot # * connect to ::1 port 8010 from ::1 port 41700 failed: Connection refused1354buildbot # * Trying 127.0.0.1:8010...1355buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 595001356buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1357buildbot # Dload Upload Total Spent Left Speed1358buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1359buildbot # > HEAD / HTTP/1.11360buildbot # > Host: localhost:80101361buildbot # > User-Agent: curl/8.21.01362buildbot # > Accept: */*1363buildbot # >1364buildbot # * Request completely sent off1365buildbot # < HTTP/1.1 200 OK1366buildbot # < Date: Sun, 23 Aug 2026 03:03:46 GMT1367buildbot # < Content-Type: text/html1368buildbot # < Cache-Control: public,max-age=01369buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MDI2fQ.lG0l55eaCI_zUPOzjhrVbFmcNhRaEpnU3-ge7RkCJuw; Path=/1370buildbot # <1371buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01372buildbot # * Connection #0 to host localhost:8010 left intact1373buildbot: (finished: waiting for success: curl --fail -v --head http://localhost:8010, in 0.09 seconds)1374(finished: subtest: Master and worker services start, in 4.51 seconds)1375subtest: Project is registered in buildbot1376??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1377 File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281378buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1379buildbot # * Host localhost:8010 was resolved.1380buildbot # * IPv6: ::11381buildbot # * IPv4: 127.0.0.11382buildbot # * Trying [::1]:8010...1383buildbot # * connect to ::1 port 8010 from ::1 port 41702 failed: Connection refused1384buildbot # * Trying 127.0.0.1:8010...1385buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 595101386buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1387buildbot # Dload Upload Total Spent Left Speed1388buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1389buildbot # > GET /api/v2/projects HTTP/1.11390buildbot # > Host: localhost:80101391buildbot # > User-Agent: curl/8.21.01392buildbot # > Accept: */*1393buildbot # >1394buildbot # * Request completely sent off1395buildbot # < HTTP/1.1 200 OK1396buildbot # < Date: Sun, 23 Aug 2026 03:03:47 GMT1397buildbot # < Content-Type: text/plain; charset=utf-81398buildbot # < Content-Length: 531399buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MDI3fQ.7gwm3xw3WBUIL4550RlbYuQOZRFR3xESFhvLQ6XaZz8; Path=/1400buildbot # <1401buildbot # { [53 bytes data]1402buildbot # 100 53 100 53 0 0 1790 0 0100 53 100 53 0 0 1562 0 0100 53 100 53 0 0 1385 0 01403buildbot # * Connection #0 to host localhost:8010 left intact1404buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.09 seconds)1405buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1406buildbot # * Host localhost:8010 was resolved.1407buildbot # * IPv6: ::11408buildbot # * IPv4: 127.0.0.11409buildbot # * Trying [::1]:8010...1410buildbot # * connect to ::1 port 8010 from ::1 port 41718 failed: Connection refused1411buildbot # * Trying 127.0.0.1:8010...1412buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 595121413buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1414buildbot # Dload Upload Total Spent Left Speed1415buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1416buildbot # > GET /api/v2/projects HTTP/1.11417buildbot # > Host: localhost:80101418buildbot # > User-Agent: curl/8.21.01419buildbot # > Accept: */*1420buildbot # >1421buildbot # * Request completely sent off1422buildbot # < HTTP/1.1 200 OK1423buildbot # < Date: Sun, 23 Aug 2026 03:03:48 GMT1424buildbot # < Content-Type: text/plain; charset=utf-81425buildbot # < Content-Length: 531426buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MDI4fQ.geb8f2metFiiRNarBvXMnWoYpi7CInOLA9Uw4wcDhqg; Path=/1427buildbot # <1428buildbot # { [53 bytes data]1429buildbot # 100 53 100 53 0 0 1526 0 0100 53 100 53 0 0 1358 0 0100 53 100 53 0 0 1223 0 01430buildbot # * Connection #0 to host localhost:8010 left intact1431buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.12 seconds)1432buildbot # [ 35.315844] twistd[1074]: 2026-08-23T03:03:48+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x725fa4118050>1433buildbot # [ 35.329117] twistd[1073]: 2026-08-23T03:03:48+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=36442)1434buildbot # [ 35.335233] twistd[1074]: 2026-08-23T03:03:48+0000 [Broker,client] message from master: attached1435buildbot # [ 35.344697] twistd[1073]: 2026-08-23T03:03:48+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1436buildbot # [ 35.359329] twistd[1073]: 2026-08-23T03:03:48+0000 [-] bot attached1437buildbot # [ 35.364378] twistd[1073]: 2026-08-23T03:03:48+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to reload-gitea-projects1438buildbot # [ 35.368117] twistd[1074]: 2026-08-23T03:03:48+0000 [Broker,client] message from master: attached1439buildbot # [ 35.374287] twistd[1074]: 2026-08-23T03:03:48+0000 [Broker,client] Connected to buildmaster; worker is ready1440buildbot # [ 35.376684] twistd[1074]: 2026-08-23T03:03:48+0000 [Broker,client] sending application-level keepalives every 600 seconds1441buildbot # [ 35.399811] twistd[1073]: 2026-08-23T03:03:48+0000 [-] starting build <Build reload-gitea-projects number:None results:success> using worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=AVAILABLE>1442buildbot # [ 35.402206] twistd[1073]: 2026-08-23T03:03:48+0000 [-] <Build reload-gitea-projects number:None results:success>.startBuild1443buildbot # [ 35.440785] twistd[1073]: 2026-08-23T03:03:48+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1444buildbot # [ 35.444521] twistd[1073]: 2026-08-23T03:03:48+0000 [-] starting build <Build reload-gitea-projects number:1 results:success>.. pinging the worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=BUILDING>1445buildbot # [ 35.446690] twistd[1073]: 2026-08-23T03:03:48+0000 [-] sending ping1446buildbot # [ 35.448209] twistd[1074]: 2026-08-23T03:03:48+0000 [Broker,client] message from master: ping1447buildbot # [ 35.449141] twistd[1073]: 2026-08-23T03:03:48+0000 [Broker,0,127.0.0.1] ping finished: success1448buildbot # [ 35.521936] gitea[810]: 2026/08/23 03:03:48 HTTPRequest [I] router: completed GET /api/v1/user/repos?limit=100 for [::1]:48704, 200 OK in 20.2ms @ user/repo.go:89(user.ListMyRepos)1449buildbot # [ 35.538459] gitea[810]: 2026/08/23 03:03:48 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/topics for [::1]:48712, 200 OK in 12.2ms @ repo/topic.go:21(repo.ListTopics)1450buildbot # [ 35.541958] twistd[1073]: 2026-08-23T03:03:48+0000 [buildbot_nix.gitea_projects#info] Updated backend gitea_projects with 1 projects1451buildbot # [ 35.547090] twistd[1073]: 2026-08-23T03:03:48+0000 [-] releaseLocks(ReloadGiteaProjects(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), PosixPath('gitea-project-cache.json'), backend=<buildbot_nix.gitea_projects.GiteaBackend object at 0x7dc4dd997cb0>)): []1452buildbot # [ 35.559770] twistd[1073]: 2026-08-23T03:03:48+0000 [-] step 'reload_gitea_projects' complete: success (None)1453buildbot # [ 35.586647] gitea[810]: 2026/08/23 03:03:48 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks?limit=100 for [::1]:48718, 200 OK in 15.3ms @ repo/hook.go:26(repo.ListHooks)1454buildbot # [ 35.588537] twistd[1073]: 2026-08-23T03:03:48+0000 [-] creating hook for gitea-admin/test-flake1455buildbot # [ 35.611891] gitea[810]: 2026/08/23 03:03:48 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:48720, 201 Created in 20.0ms @ repo/hook.go:200(repo.CreateHook)1456buildbot # [ 35.614813] twistd[1073]: 2026-08-23T03:03:48+0000 [-] beginning configuration update1457buildbot # [ 35.616664] twistd[1073]: 2026-08-23T03:03:48+0000 [-] Loading configuration from '/nix/store/81i9hbhd1izrch0ajjp1bjhjrqiw8msk-master.cfg'1458buildbot # [ 35.620056] twistd[1073]: 2026-08-23T03:03:48+0000 [-] releaseLocks(CreateGiteaProjectHooks(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), 'http://localhost/')): []1459buildbot # [ 35.625807] twistd[1073]: 2026-08-23T03:03:48+0000 [buildbot_nix.gitea_projects#info] Loading 1 cached repositories: [gitea-admin/test-flake]1460buildbot # [ 35.631953] twistd[1073]: 2026-08-23T03:03:48+0000 [-] step 'create_gitea_project_hooks' complete: success (None)1461buildbot # [ 35.633106] twistd[1073]: 2026-08-23T03:03:48+0000 [-] <Build reload-gitea-projects number:1 results:success>: build finished1462buildbot # [ 35.640584] twistd[1073]: 2026-08-23T03:03:48+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1463buildbot # [ 35.672065] twistd[1073]: 2026-08-23T03:03:48+0000 [-] adding 8 new builders, removing 01464buildbot # [ 35.841163] twistd[1073]: 2026-08-23T03:03:49+0000 [-] adding 12 new schedulers, removing 01465buildbot # [ 35.991846] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-dependency-failed1466buildbot # [ 35.993373] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-register-gcroot1467buildbot # [ 35.994733] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-failed-eval1468buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1469buildbot # [ 35.996078] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-effect1470buildbot # [ 35.997394] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-scheduled-effect1471buildbot # [ 35.998718] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-build1472buildbot # [ 36.000065] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-cached-failure1473buildbot # [ 36.002635] twistd[1073]: 2026-08-23T03:03:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-eval1474buildbot # [ 36.003958] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1475buildbot # [ 36.004905] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1476buildbot # [ 36.005844] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1477buildbot # [ 36.006847] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1478buildbot # [ 36.007786] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1479buildbot # [ 36.008730] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1480buildbot # [ 36.009661] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1481buildbot # [ 36.012095] twistd[1074]: 2026-08-23T03:03:49+0000 [Broker,client] message from master: attached1482buildbot # [ 36.027457] twistd[1073]: 2026-08-23T03:03:49+0000 [-] configuration update complete (took 0.412 seconds)1483buildbot # * Host localhost:8010 was resolved.1484buildbot # * IPv6: ::11485buildbot # * IPv4: 127.0.0.11486buildbot # * Trying [::1]:8010...1487buildbot # * connect to ::1 port 8010 from ::1 port 41734 failed: Connection refused1488buildbot # * Trying 127.0.0.1:8010...1489buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 595221490buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1491buildbot # Dload Upload Total Spent Left Speed1492buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1493buildbot # > GET /api/v2/projects HTTP/1.11494buildbot # > Host: localhost:80101495buildbot # > User-Agent: curl/8.21.01496buildbot # > Accept: */*1497buildbot # >1498buildbot # * Request completely sent off1499buildbot # < HTTP/1.1 200 OK1500buildbot # < Date: Sun, 23 Aug 2026 03:03:49 GMT1501buildbot # < Content-Type: text/plain; charset=utf-81502buildbot # < Content-Length: 2901503buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4MDU5MDI5fQ.-GH0mUqCAPPobg3baTSwYyoIkqhNGjxJ_j7p3AMA_dw; Path=/1504buildbot # <1505buildbot # { [290 bytes data]1506buildbot # 100 290 100 290 0 0 10668 0 0100 290 100 290 0 0 9201 0 0100 290 100 290 0 0 8020 0 01507buildbot # * Connection #0 to host localhost:8010 left intact1508buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.12 seconds)1509(finished: subtest: Project is registered in buildbot, in 2.33 seconds)1510subtest: Verify webhook was created by buildbot1511buildbot: waiting for success: 1512 TOKEN=$(cat /tmp/gitea-token)1513 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1514 1515buildbot # [ 36.189994] gitea[810]: 2026/08/23 03:03:49 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:48736, 200 OK in 14.1ms @ repo/hook.go:26(repo.ListHooks)1516buildbot: (finished: waiting for success: 1517 TOKEN=$(cat /tmp/gitea-token)1518 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1519 , in 0.08 seconds)1520(finished: subtest: Verify webhook was created by buildbot, in 0.08 seconds)1521subtest: Push new commit to trigger webhook1522buildbot: must succeed: 1523 cd /tmp/test-flake1524 echo '# Updated via webhook test' >> flake.nix1525 git add flake.nix1526 git commit -m 'Test commit to trigger webhook'1527 git push origin master1528 1529buildbot # [ 36.281607] gitea[810]: 2026/08/23 03:03:49 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:48742, 401 Unauthorized in 1.2ms @ repo/githttp.go:455(repo.GetInfoRefs)1530buildbot # [ 36.312715] gitea[810]: 2026/08/23 03:03:49 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:48742, 200 OK in 27.9ms @ repo/githttp.go:455(repo.GetInfoRefs)1531buildbot # Enumerating objects: 5, done.1532buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1533buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1534buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 348 bytes | 348.00 KiB/s, done.1535buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)1536buildbot # [ 36.553808] gitea[810]: 2026/08/23 03:03:49 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 2.7ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1537buildbot # [ 36.832040] gitea[810]: 2026/08/23 03:03:50 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 33.2ms @ private/hook_post_receive.go:101(private.HookPostReceive)1538buildbot # [ 36.849260] gitea[810]: 2026/08/23 03:03:50 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:48742, 200 OK in 510.4ms @ repo/githttp.go:438(repo.ServiceReceivePack)1539buildbot # To http://localhost:3742/gitea-admin/test-flake.git1540buildbot # 6dc6325..44cabc5 master -> master1541buildbot: (finished: must succeed: 1542 cd /tmp/test-flake1543 echo '# Updated via webhook test' >> flake.nix1544 git add flake.nix1545 git commit -m 'Test commit to trigger webhook'1546 git push origin master1547 , in 0.66 seconds)1548(finished: subtest: Push new commit to trigger webhook, in 0.66 seconds)1549subtest: Webhook triggers nix-eval build1550buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1551buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1552buildbot # Dload Upload Total Spent Left Speed1553buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 23409 0 0100 411 100 411 0 0 18571 0 0100 411 100 411 0 0 15541 0 01554buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1555buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1556buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1557buildbot # Dload Upload Total Spent Left Speed1558buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51648 0 0100 937 100 937 0 0 41390 0 0100 937 100 937 0 0 34698 0 01559buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1560buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1561buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1562buildbot # Dload Upload Total Spent Left Speed1563buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 14924 0 0100 411 100 411 0 0 12872 0 0100 411 100 411 0 0 11329 0 01564buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1565buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1566buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1567buildbot # Dload Upload Total Spent Left Speed1568buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51616 0 0100 937 100 937 0 0 41312 0 0100 937 100 937 0 0 33148 0 01569buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1570buildbot # [ 38.265607] twistd[1073]: 2026-08-23T03:03:51+0000 [_GenericHTTPChannelProtocol,9,127.0.0.1] Received event 'push' from gitea1571buildbot # [ 38.287286] twistd[1073]: 2026-08-23T03:03:51+0000 [-] added change with revision 44cabc5baa515a737cac0bb1c71f0a814337a0be to database1572buildbot # [ 38.289048] twistd[1073]: 2026-08-23T03:03:51+0000 [-] injected change 11573buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1574buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1575buildbot # Dload Upload Total Spent Left Speed1576buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 23574 0 0100 411 100 411 0 0 18691 0 0100 411 100 411 0 0 15452 0 01577buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1578buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1579buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1580buildbot # Dload Upload Total Spent Left Speed1581buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 53625 0 0100 937 100 937 0 0 42881 0 0100 937 100 937 0 0 35778 0 01582buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1583buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1584buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1585buildbot # Dload Upload Total Spent Left Speed1586buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 15049 0 0100 411 100 411 0 0 12947 0 0100 411 100 411 0 0 11370 0 01587buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1588buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1589buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1590buildbot # Dload Upload Total Spent Left Speed1591buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54074 0 0100 937 100 937 0 0 42879 0 0100 937 100 937 0 0 35746 0 01592buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1593buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1594buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1595buildbot # Dload Upload Total Spent Left Speed1596buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 15730 0 0100 411 100 411 0 0 13400 0 0100 411 100 411 0 0 11739 0 01597buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1598buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1599buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1600buildbot # Dload Upload Total Spent Left Speed1601buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 53211 0 0100 937 100 937 0 0 42271 0 0100 937 100 937 0 0 35274 0 01602buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1603buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1604buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1605buildbot # Dload Upload Total Spent Left Speed1606buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 16317 0 0100 411 100 411 0 0 13824 0 0100 411 100 411 0 0 12054 0 01607buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1608buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1609buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1610buildbot # Dload Upload Total Spent Left Speed1611buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54597 0 0100 937 100 937 0 0 43211 0 0100 937 100 937 0 0 36023 0 01612buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1613buildbot # [ 43.319540] twistd[1073]: 2026-08-23T03:03:56+0000 [-] added buildset 2 to database1614buildbot # [ 43.464626] twistd[1073]: 2026-08-23T03:03:56+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1615buildbot # [ 43.469831] twistd[1073]: 2026-08-23T03:03:56+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild1616buildbot # [ 43.533423] twistd[1073]: 2026-08-23T03:03:56+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1617buildbot # [ 43.537055] twistd[1073]: 2026-08-23T03:03:56+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1618buildbot # [ 43.539348] twistd[1073]: 2026-08-23T03:03:56+0000 [-] sending ping1619buildbot # [ 43.541664] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] message from master: ping1620buildbot # [ 43.542899] twistd[1073]: 2026-08-23T03:03:56+0000 [Broker,0,127.0.0.1] ping finished: success1621buildbot # [ 43.562085] twistd[1073]: 2026-08-23T03:03:56+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1622buildbot # [ 43.564098] twistd[1073]: 2026-08-23T03:03:56+0000 [-] command '['git', '--version']' in dir 'build'1623buildbot # [ 43.566064] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command 0): startCommand:shell1624buildbot # [ 43.567066] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1625buildbot # [ 43.569151] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command ['git', '--version']): git --version1626buildbot # [ 43.570641] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1627buildbot # [ 43.572596] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1628buildbot # [ 43.573898] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1629buildbot # [ 43.576690] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command ['git', '--version']): using PTY: False1630buildbot # [ 43.594681] twistd[1074]: 2026-08-23T03:03:56+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0191651631buildbot # [ 43.596384] twistd[1074]: 2026-08-23T03:03:56+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa411a7b0>1632buildbot # [ 43.623864] twistd[1073]: 2026-08-23T03:03:56+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01633buildbot # [ 43.657652] twistd[1073]: 2026-08-23T03:03:56+0000 [-] <RemoteCommand 'stat' at 138284463349040>: RemoteCommand.run [1]1634buildbot # [ 43.667061] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command 1): startCommand:stat1635buildbot # [ 43.668082] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'1636buildbot # [ 43.670841] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x725fa47f3b60>1637buildbot # [ 43.673239] twistd[1073]: 2026-08-23T03:03:56+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 138284463349040> rc=21638buildbot # [ 43.683915] twistd[1073]: 2026-08-23T03:03:56+0000 [-] <RemoteCommand 'listdir' at 138284461580176>: RemoteCommand.run [2]1639buildbot # [ 43.715522] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command 2): startCommand:listdir1640buildbot # [ 43.716850] twistd[1074]: 2026-08-23T03:03:56+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x725fa4119010>1641buildbot # [ 43.719580] twistd[1073]: 2026-08-23T03:03:56+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 138284461580176> rc=01642buildbot # [ 43.726404] twistd[1073]: 2026-08-23T03:03:56+0000 [-] No git repo present, making full clone1643buildbot # [ 43.727591] twistd[1073]: 2026-08-23T03:03:56+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [3]1644buildbot # [ 43.729964] twistd[1073]: 2026-08-23T03:03:56+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'1645buildbot # [ 43.763067] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command 3): startCommand:shell1646buildbot # [ 43.764278] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand1647buildbot # [ 43.766689] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake . --progress1648buildbot # [ 43.769898] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1649buildbot # [ 43.772850] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}1650buildbot # [ 43.776657] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']1651buildbot # [ 43.779977] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False1652buildbot # [ 43.865589] gitea[810]: 2026/08/23 03:03:57 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:51466, 200 OK in 11.1ms @ repo/githttp.go:455(repo.GetInfoRefs)1653buildbot # [ 43.877392] gitea[810]: 2026/08/23 03:03:57 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:51466, 200 OK in 9.4ms @ repo/githttp.go:433(repo.ServiceUploadPack)1654buildbot # [ 43.905120] gitea[810]: 2026/08/23 03:03:57 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:51466, 200 OK in 18.5ms @ repo/githttp.go:433(repo.ServiceUploadPack)1655buildbot # [ 43.941761] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.1662101656buildbot # [ 43.944546] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa40d16d0>1657buildbot # [ 43.947950] twistd[1073]: 2026-08-23T03:03:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=01658buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1659buildbot # [ 43.976078] twistd[1073]: 2026-08-23T03:03:57+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']'>: RemoteCommand.run [4]1660buildbot # [ 43.977716] twistd[1073]: 2026-08-23T03:03:57+0000 [-] command '['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']' in dir 'build'1661buildbot # [ 43.993154] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command 4): startCommand:shell1662buildbot # [ 43.994208] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): RunProcess._startCommand1663buildbot # [ 43.995931] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): git checkout -f 44cabc5baa515a737cac0bb1c71f0a814337a0be1664buildbot # [ 43.999699] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1665buildbot # [ 44.001887] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): watching logfiles {}1666buildbot # [ 44.003429] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): argv: [b'git', b'checkout', b'-f', b'44cabc5baa515a737cac0bb1c71f0a814337a0be']1667buildbot # [ 44.005436] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): using PTY: False1668buildbot # % Total % Received % Xferd Average Speed Tim[ 44.032088] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): command finished with signal None, exit code 0, elapsedTime: 0.0318991669buildbot # [ 44.033959] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa40d2850>1670buildbot # e Time Time Current1671buildbot # Dload Upload Total Spent Left Speed1672buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 30981 0 [ 44.055070] twistd[1073]: 2026-08-23T03:03:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']'> rc=01673buildbot # 0100 761 100 761 0 0 23375 0 0100 761 100 761 0 0 19477 0 01674buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1675buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1676buildbot # [ 44.089128] twistd[1073]: 2026-08-23T03:03:57+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [5]1677buildbot # [ 44.090778] twistd[1073]: 2026-08-23T03:03:57+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1678buildbot # [ 44.099079] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command 5): startCommand:shell1679buildbot # [ 44.100343] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1680buildbot # [ 44.101943] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive1681buildbot # [ 44.103809] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1682buildbot # [ 44.107612] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1683buildbot # [ 44.109063] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']1684buildbot # [ 44.110847] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False1685buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1686buildbot # Dload Upload Total Spent Left Speed1687buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 35725 0 0100 937 100 937 0 0 27839 0 0100 937 100 937 0 0 22923 0 01688buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1689buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1690buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1691buildbot # Dload Upload Total Spent Left Speed1692buildbot # 0 0 0 0 0 0 0 0 0100 1402 100 1402 0 0 53513 0 0100 1402 100 1402 0 0 42223 0 0100 1402 100 1402 0 0 34483 0 01693buildbot # [ 44.291720] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1848971694buildbot # [ 44.294154] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46c2650>1695buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.10 seconds)1696buildbot # [ 44.297616] twistd[1073]: 2026-08-23T03:03:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=01697buildbot # [ 44.314058] twistd[1073]: 2026-08-23T03:03:57+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [6]1698buildbot # [ 44.315338] twistd[1073]: 2026-08-23T03:03:57+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1699buildbot # [ 44.341065] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command 6): startCommand:shell1700buildbot # [ 44.342137] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1701buildbot # [ 44.343549] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1702buildbot # [ 44.344949] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1703buildbot # [ 44.346958] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1704buildbot # [ 44.349700] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1705buildbot # [ 44.351078] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1706buildbot # [ 44.366661] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0180281707buildbot # [ 44.368426] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46c2b10>1708buildbot # [ 44.398361] twistd[1073]: 2026-08-23T03:03:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01709buildbot # [ 44.418552] twistd[1073]: 2026-08-23T03:03:57+0000 [-] Got Git revision 44cabc5baa515a737cac0bb1c71f0a814337a0be1710buildbot # [ 44.426738] twistd[1073]: 2026-08-23T03:03:57+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []1711buildbot # [ 44.441166] twistd[1073]: 2026-08-23T03:03:57+0000 [-] step 'git' complete: success (None)1712buildbot # [ 44.447918] twistd[1073]: 2026-08-23T03:03:57+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7dc4dc504910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7dc4dc50d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7dc4dc50d010>)])1713buildbot # [ 44.462991] twistd[1073]: 2026-08-23T03:03:57+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [7]1714buildbot # [ 44.464645] twistd[1073]: 2026-08-23T03:03:57+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1715buildbot # [ 44.466965] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command 7): startCommand:shell1716buildbot # [ 44.469534] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1717buildbot # [ 44.473095] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1718buildbot # [ 44.475105] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1719buildbot # [ 44.477343] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1720buildbot # [ 44.478908] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1721buildbot # [ 44.480971] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1722buildbot # [ 44.513643] twistd[1073]: 2026-08-23T03:03:57+0000 [twisted.web.client._HTTP11ClientFactory#info] Starting factory _HTTP11ClientFactory(<function HTTPConnectionPool._newConnection.<locals>.quiescentCallback at 0x7dc4dc218880>, <HostnameEndpoint localhost:3742>)1723buildbot # [ 44.524785] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0520011724buildbot # [ 44.526724] twistd[1074]: 2026-08-23T03:03:57+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46e2b10>1725buildbot # [ 44.532109] twistd[1073]: 2026-08-23T03:03:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01726buildbot # [ 44.536898] twistd[1073]: 2026-08-23T03:03:57+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [8]1727buildbot # [ 44.540541] twistd[1073]: 2026-08-23T03:03:57+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1728buildbot # [ 44.578467] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command 8): startCommand:shell1729buildbot # [ 44.579523] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1730buildbot # [ 44.583058] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1731buildbot # [ 44.588571] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1732buildbot # [ 44.592845] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1733buildbot # [ 44.596468] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1734buildbot # [ 44.602552] twistd[1074]: 2026-08-23T03:03:57+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1735buildbot # [ 44.616984] gitea[810]: 2026/08/23 03:03:57 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/44cabc5baa515a737cac0bb1c71f0a814337a0be for [::1]:51482, 201 Created in 98.9ms @ repo/status.go:21(repo.NewCommitStatus)1736buildbot # [ 44.891754] systemd[1]: Started Nix Daemon.1737buildbot # [ 45.005962] nix-daemon[1348]: accepted connection from pid 1346, user buildbot-worker1738buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1739buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1740buildbot # Dload Upload Total Spent Left Speed1741buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 32888 0 0100 761 100 761 0 0 27626 0 0100 761 100 761 0 0 23864 0 01742buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1743buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1744buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1745buildbot # Dload Upload Total Spent Left Speed1746buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 53145 0 0100 937 100 937 0 0 42419 0 0100 937 100 937 0 0 35476 0 01747buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1748buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1749buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1750buildbot # Dload Upload Total Spent Left Speed1751buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 99827 0 0100 1736 100 1736 0 0 79301 0 0100 1736 100 1736 0 0 66211 0 01752buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1753buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1754buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1755buildbot # Dload Upload Total Spent Left Speed1756buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 27469 0 0100 761 100 761 0 0 23608 0 0100 761 100 761 0 0 20762 0 01757buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1758buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1759buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1760buildbot # Dload Upload Total Spent Left Speed1761buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54840 0 0100 937 100 937 0 0 43357 0 0100 937 100 937 0 0 35922 0 01762buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1763buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1764buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1765buildbot # Dload Upload Total Spent Left Speed1766buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 96842 0 0100 1736 100 1736 0 0 77330 0 0100 1736 100 1736 0 0 64790 0 01767buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1768buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1769buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1770buildbot # Dload Upload Total Spent Left Speed1771buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 27229 0 0100 761 100 761 0 0 23420 0 0100 761 100 761 0 0 20631 0 01772buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1773buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1774buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1775buildbot # Dload Upload Total Spent Left Speed1776buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54619 0 0100 937 100 937 0 0 43269 0 0100 937 100 937 0 0 35999 0 01777buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1778buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1779buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1780buildbot # Dload Upload Total Spent Left Speed1781buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 95568 0 0100 1736 100 1736 0 0 76462 0 0100 1736 100 1736 0 0 64179 0 01782buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1783buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1784buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1785buildbot # Dload Upload Total Spent Left Speed1786buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 25015 0 0100 761 100 761 0 0 20603 0 0100 761 100 761 0 0 17473 0 01787buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1788buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1789buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1790buildbot # Dload Upload Total Spent Left Speed1791buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 35663 0 0100 937 100 937 0 0 27842 0 0100 937 100 937 0 0 23827 0 01792buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.10 seconds)1793buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1794buildbot # [ 49.339933] nix-daemon[1348]: accepted connection from pid 1387, user buildbot-worker1795buildbot # [ 49.375453] nix-daemon[1348]: accepted connection from pid 1346, user buildbot-worker1796buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1797buildbot # Dload Upload Total Spent Left Speed1798buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 96337 0 0100 1736 100 1736 0 0 77220 0 0100 1736 100 1736 0 0 64708 0 01799buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.09 seconds)1800buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1801buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1802buildbot # Dload Upload Total Spent Left Speed1803buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 26575 0 0100 761 100 761 0 0 22945 0 0100 761 100 761 0 0 20254 0 01804buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1805buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1806buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1807buildbot # Dload Upload Total Spent Left Speed1808buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54321 0 0100 937 100 937 0 0 43078 0 0100 937 100 937 0 0 35914 0 01809buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1810buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1811buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1812buildbot # Dload Upload Total Spent Left Speed1813buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 98156 0 0100 1736 100 1736 0 0 78456 0 0100 1736 100 1736 0 0 65586 0 01814buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1815buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1816buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1817buildbot # Dload Upload Total Spent Left Speed1818buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 29250 0 0100 761 100 761 0 0 25057 0 0100 761 100 761 0 0 21911 0 01819buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1820buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1821buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1822buildbot # Dload Upload Total Spent Left Speed1823buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54479 0 0100 937 100 937 0 0 43183 0 0100 937 100 937 0 0 35990 0 01824buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1825buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1826buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1827buildbot # Dload Upload Total Spent Left Speed1828buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 96972 0 0100 1736 100 1736 0 0 77669 0 0100 1736 100 1736 0 0 65209 0 01829buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1830buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1831buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1832buildbot # Dload Upload Total Spent Left Speed1833buildbot # 0 0 0 0 0 0 0 0 0100 761 100 761 0 0 26503 0 0100 761 100 761 0 0 22878 0 0100 761 100 761 0 0 20215 0 01834buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1835buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1836buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1837buildbot # Dload Upload Total Spent Left Speed1838buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54562 0 0100 937 100 937 0 0 43163 0 0100 937 100 937 0 0 35965 0 01839buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1840buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1841buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1842buildbot # Dload Upload Total Spent Left Speed1843buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 92105 0 0100 1736 100 1736 0 0 74238 0 0100 1736 100 1736 0 0 62551 0 01844buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1845buildbot # [ 53.720789] twistd[1074]: 2026-08-23T03:04:06+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 9.1415161846buildbot # [ 53.731368] twistd[1074]: 2026-08-23T03:04:06+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46438a0>1847buildbot # [ 53.738670] twistd[1073]: 2026-08-23T03:04:06+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01848buildbot # [ 53.788189] twistd[1073]: 2026-08-23T03:04:07+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7dc4dc504910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7dc4dc50d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7dc4dc50d010>)]1849buildbot # [ 53.803416] twistd[1073]: 2026-08-23T03:04:07+0000 [-] step 'Evaluate flake' complete: success (None)1850buildbot # [ 53.848458] twistd[1073]: 2026-08-23T03:04:07+0000 [-] added buildset 3 to database1851buildbot # [ 53.886577] gitea[810]: 2026/08/23 03:04:07 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/44cabc5baa515a737cac0bb1c71f0a814337a0be for [::1]:51482, 201 Created in 75.8ms @ repo/status.go:21(repo.NewCommitStatus)1852buildbot # [ 53.948531] gitea[810]: 2026/08/23 03:04:07 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/44cabc5baa515a737cac0bb1c71f0a814337a0be for [::1]:51482, 201 Created in 49.0ms @ repo/status.go:21(repo.NewCommitStatus)1853buildbot # [ 53.967980] twistd[1073]: 2026-08-23T03:04:07+0000 [-] starting build <Build gitea-admin/test-flake/nix-build number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-build' worker='local-worker-000' state=AVAILABLE>1854buildbot # [ 53.970291] twistd[1073]: 2026-08-23T03:04:07+0000 [-] <Build gitea-admin/test-flake/nix-build number:None results:success>.startBuild1855buildbot # [ 54.031243] twistd[1073]: 2026-08-23T03:04:07+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1856buildbot # [ 54.035052] twistd[1073]: 2026-08-23T03:04:07+0000 [-] starting build <Build gitea-admin/test-flake/nix-build number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-build' worker='local-worker-000' state=BUILDING>1857buildbot # [ 54.037335] twistd[1073]: 2026-08-23T03:04:07+0000 [-] sending ping1858buildbot # [ 54.039122] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] message from master: ping1859buildbot # [ 54.040076] twistd[1073]: 2026-08-23T03:04:07+0000 [Broker,0,127.0.0.1] ping finished: success1860buildbot # [ 54.058068] twistd[1073]: 2026-08-23T03:04:07+0000 [-] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']'>: RemoteCommand.run [9]1861buildbot # [ 54.060795] twistd[1073]: 2026-08-23T03:04:07+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']' in dir 'build'1862buildbot # [ 54.064786] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command 9): startCommand:shell1863buildbot # [ 54.066479] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): RunProcess._startCommand1864buildbot # [ 54.069333] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-x86_64-linux.test '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*'1865buildbot # [ 54.073373] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-build/build (timeout 10800 secs)1866buildbot # [ 54.076804] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): watching logfiles {}1867buildbot # [ 54.081079] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-x86_64-linux.test', b'/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']1868buildbot # [ 54.085397] twistd[1074]: 2026-08-23T03:04:07+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): using PTY: False1869buildbot # [ 54.183770] nix-daemon[1348]: accepted connection from pid 1436, user buildbot-worker1870buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1871buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1872buildbot # Dload Upload Total Spent Left Speed1873buildbot # 0 0 0 0 0 0 0 0 0100 1111 100 1111 0 0 61077 0 0100 1111 100 1111 0 0 48824 0 0100 1111 100 1111 0 0 40769 0 01874buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1875buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1876buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1877buildbot # Dload Upload Total Spent Left Speed1878buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 49758 0 0100 937 100 937 0 0 40123 0 0100 937 100 937 0 0 33794 0 01879buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1880buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1881buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1882buildbot # Dload Upload Total Spent Left Speed1883buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 99404 0 0100 1736 100 1736 0 0 79056 0 0100 1736 100 1736 0 0 66085 0 01884buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1885buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1886buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1887buildbot # Dload Upload Total Spent Left Speed1888buildbot # 0 0 0 0 0 0 0 0 0100 1111 100 1111 0 0 44456 0 0100 1111 100 1111 0 0 36229 0 0100 1111 100 1111 0 0 30463 0 01889buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1890buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1891buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1892buildbot # Dload Upload Total Spent Left Speed1893buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51523 0 0100 937 100 937 0 0 41266 0 0100 937 100 937 0 0 34615 0 01894buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1895buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1896buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1897buildbot # Dload Upload Total Spent Left Speed1898buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 96241 0 0100 1736 100 1736 0 0 76831 0 0100 1736 100 1736 0 0 64492 0 01899buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1900buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1901buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1902buildbot # Dload Upload Total Spent Left Speed1903buildbot # 0 0 0 0 0 0 0 0 0100 1111 100 1111 0 0 34597 0 0100 1111 100 1111 0 0 30293 0 0100 1111 100 1111 0 0 27075 0 01904buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1905buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1906buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1907buildbot # Dload Upload Total Spent Left Speed1908buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 55332 0 0100 937 100 937 0 0 43674 0 0100 937 100 937 0 0 36329 0 01909buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1910buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1911buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1912buildbot # Dload Upload Total Spent Left Speed1913buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 97.76k 0 0100 1736 100 1736 0 0 79381 0 0100 1736 100 1736 0 0 66138 0 01914buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1915buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1916buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1917buildbot # Dload Upload Total Spent Left Speed1918buildbot # 0 0 0 0 0 0 0 0 0100 1111 100 1111 0 0 38074 0 0100 1111 100 1111 0 0 32898 0 0100 1111 100 1111 0 0 29163 0 01919buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1920buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1921buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1922buildbot # Dload Upload Total Spent Left Speed1923buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 53897 0 0100 937 100 937 0 0 42983 0 0100 937 100 937 0 0 35833 0 01924buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1925buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1926buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1927buildbot # Dload Upload Total Spent Left Speed1928buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 95196 0 0100 1736 100 1736 0 0 76314 0 0100 1736 100 1736 0 0 64037 0 01929buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1930buildbot # [ 58.921355] twistd[1074]: 2026-08-23T03:04:12+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): command finished with signal None, exit code 0, elapsedTime: 4.8403521931buildbot # [ 58.924416] twistd[1074]: 2026-08-23T03:04:12+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4643bd0>1932buildbot # [ 58.928210] twistd[1073]: 2026-08-23T03:04:12+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']'> rc=01933buildbot # [ 58.960152] twistd[1073]: 2026-08-23T03:04:12+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): []1934buildbot # [ 58.972802] twistd[1073]: 2026-08-23T03:04:12+0000 [-] step 'Build flake attr' complete: success (None)1935buildbot # [ 58.992555] twistd[1073]: 2026-08-23T03:04:12+0000 [-] added buildset 4 to database1936buildbot # [ 59.131969] twistd[1073]: 2026-08-23T03:04:12+0000 [-] starting build <Build gitea-admin/test-flake/nix-register-gcroot number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-register-gcroot' worker='local-worker-000' state=AVAILABLE>1937buildbot # [ 59.137398] twistd[1073]: 2026-08-23T03:04:12+0000 [-] <Build gitea-admin/test-flake/nix-register-gcroot number:None results:success>.startBuild1938buildbot # [ 59.202985] twistd[1073]: 2026-08-23T03:04:12+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1939buildbot # [ 59.206981] twistd[1073]: 2026-08-23T03:04:12+0000 [-] starting build <Build gitea-admin/test-flake/nix-register-gcroot number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-register-gcroot' worker='local-worker-000' state=BUILDING>1940buildbot # [ 59.209432] twistd[1073]: 2026-08-23T03:04:12+0000 [-] sending ping1941buildbot # [ 59.210614] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] message from master: ping1942buildbot # [ 59.212063] twistd[1073]: 2026-08-23T03:04:12+0000 [Broker,0,127.0.0.1] ping finished: success1943buildbot # [ 59.230914] twistd[1073]: 2026-08-23T03:04:12+0000 [-] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']'>: RemoteCommand.run [10]1944buildbot # [ 59.233369] twistd[1073]: 2026-08-23T03:04:12+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']' in dir 'build'1945buildbot # [ 59.237124] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command 10): startCommand:shell1946buildbot # [ 59.238120] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): RunProcess._startCommand1947buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1948buildbot # [ 59.240505] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test -r /nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test1949buildbot # [ 59.243993] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-register-gcroot/build (timeout 1200 secs)1950buildbot # [ 59.247113] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): watching logfiles {}1951buildbot # [ 59.249518] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', b'-r', b'/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']1952buildbot # [ 59.253163] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): using PTY: False1953buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1954buildbot # Dload Upload Total Spent Left Speed1955buildbot # 0 0 0 0 0 0 0 0 0100 1460 100 1460 0 0 48896 0 0100 1460 100 1460 0 0 40802 0 0100 1460 100 1460 0 0 34683 0 01956buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1957buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1958buildbot # [ 59.364390] nix-daemon[1348]: accepted connection from pid 1490, user buildbot-worker1959buildbot # [ 59.385170] twistd[1074]: 2026-08-23T03:04:12+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): command finished with signal None, exit code 0, elapsedTime: 0.1472311960buildbot # [ 59.387919] twistd[1074]: 2026-08-23T03:04:12+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46f3550>1961buildbot # [ 59.392730] twistd[1073]: 2026-08-23T03:04:12+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']'> rc=01962buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1963buildbot # Dload Upload Total Spent Left Speed1964buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 [ 59.443114] twistd[1073]: 2026-08-23T03:04:12+0000 [-] releaseLocks(ShellCommand(name='Register gcroot', command=['nix-store', '--add-root', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/%(prop:attr)s'), '-r', Property(out_path)], logEnviron=False)): []1965buildbot # 0 36812 0 0100 937 100 937 0 0 27391 0 0100 937 100 937 0 0 23067 0 01966buildbot # [ 59.465460] twistd[1073]: 2026-08-23T03:04:12+0000 [-] step 'Register gcroot' complete: success (None)1967buildbot # [ 59.467068] twistd[1073]: 2026-08-23T03:04:12+0000 [-] <Build gitea-admin/test-flake/nix-register-gcroot number:1 results:success>: build finished1968buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1969buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1970buildbot # [ 59.476710] twistd[1073]: 2026-08-23T03:04:12+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1971buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1972buildbot # Dload Upload Total Spent Left Speed1973buildbot # 0 0 0 0 0 0 0 0 0100 1736 100 1736 0 0 43486 0 0100 1736 100 1736 0 0 37730 0 0100 1736 100 1736 0 0 31952 0 01974buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.17 seconds)1975buildbot # [ 59.651927] twistd[1073]: 2026-08-23T03:04:12+0000 [-] releaseLocks(Trigger(name='Register gcroot', waitForFinish=True, schedulerNames=['gitea-admin-test-flake-nix-register-gcroot'], haltOnFailure=True, flunkOnFailure=True, sourceStamps=[], alwaysUseLatest=False, updateSourceStamp=False, doStepIf=<function nix_build_steps.<locals>.<lambda> at 0x7dc4dd62a770>, copy_properties=['out_path', 'attr'], set_properties={'report_status': False})): []1976buildbot # [ 59.660841] twistd[1073]: 2026-08-23T03:04:12+0000 [-] step 'Register gcroot' complete: success (None)1977buildbot # [ 59.673058] twistd[1073]: 2026-08-23T03:04:12+0000 [-] <RemoteShellCommand '['rm', '-f', 'result-x86_64-linux.test']'>: RemoteCommand.run [11]1978buildbot # [ 59.674432] twistd[1073]: 2026-08-23T03:04:12+0000 [-] command '['rm', '-f', 'result-x86_64-linux.test']' in dir 'build'1979buildbot # [ 59.677365] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command 11): startCommand:shell1980buildbot # [ 59.678679] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): RunProcess._startCommand1981buildbot # [ 59.680265] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): rm -f result-x86_64-linux.test1982buildbot # [ 59.681817] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-build/build (timeout 1200 secs)1983buildbot # [ 59.683912] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): watching logfiles {}1984buildbot # [ 59.686781] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): argv: [b'rm', b'-f', b'result-x86_64-linux.test']1985buildbot # [ 59.688351] twistd[1074]: 2026-08-23T03:04:12+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): using PTY: False1986buildbot # [ 59.701114] twistd[1074]: 2026-08-23T03:04:12+0000 [-] (command ['rm', '-f', 'result-x86_64-linux.test']): command finished with signal None, exit code 0, elapsedTime: 0.0153921987buildbot # [ 59.702958] twistd[1074]: 2026-08-23T03:04:12+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46f3b50>1988buildbot # [ 59.734567] twistd[1073]: 2026-08-23T03:04:12+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-f', 'result-x86_64-linux.test']'> rc=01989buildbot # [ 59.757549] twistd[1073]: 2026-08-23T03:04:12+0000 [-] releaseLocks(ShellCommand(name='Delete temporary gcroots', command=['rm', '-f', Interpolate('result-%(prop:attr)s')], logEnviron=False)): []1990buildbot # [ 59.764106] twistd[1073]: 2026-08-23T03:04:13+0000 [-] step 'Delete temporary gcroots' complete: success (None)1991buildbot # [ 59.765400] twistd[1073]: 2026-08-23T03:04:13+0000 [-] <Build gitea-admin/test-flake/nix-build number:1 results:success>: build finished1992buildbot # [ 59.773117] twistd[1073]: 2026-08-23T03:04:13+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1993buildbot # [ 59.911603] twistd[1073]: 2026-08-23T03:04:13+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1994buildbot # [ 59.932031] twistd[1073]: 2026-08-23T03:04:13+0000 [-] step 'build flake' complete: success (None)1995buildbot # [ 59.947371] twistd[1073]: 2026-08-23T03:04:13+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dc4eec40>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dc4eefb0>)): []1996buildbot # [ 59.957866] twistd[1073]: 2026-08-23T03:04:13+0000 [-] step 'Process skipped builds' complete: skipped (None)1997buildbot # [ 59.972064] twistd[1073]: 2026-08-23T03:04:13+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1998buildbot # [ 59.974404] twistd[1073]: 2026-08-23T03:04:13+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'1999buildbot # [ 59.978575] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command 12): startCommand:shell2000buildbot # [ 59.982550] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand2001buildbot # [ 59.984870] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/2002buildbot # [ 59.987644] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2003buildbot # [ 59.990652] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}2004buildbot # [ 59.992620] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']2005buildbot # [ 59.995277] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False2006buildbot # [ 60.013053] twistd[1074]: 2026-08-23T03:04:13+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0309902007buildbot # [ 60.015223] twistd[1074]: 2026-08-23T03:04:13+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa46fbd40>2008buildbot # [ 60.019848] gitea[810]: 2026/08/23 03:04:13 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/44cabc5baa515a737cac0bb1c71f0a814337a0be for [::1]:51482, 201 Created in 119.3ms @ repo/status.go:21(repo.NewCommitStatus)2009buildbot # [ 60.044834] twistd[1073]: 2026-08-23T03:04:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=02010buildbot # [ 60.067879] twistd[1073]: 2026-08-23T03:04:13+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []2011buildbot # [ 60.075723] twistd[1073]: 2026-08-23T03:04:13+0000 [-] step 'Cleanup drv paths' complete: success (None)2012buildbot # [ 60.087368] twistd[1073]: 2026-08-23T03:04:13+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [13]2013buildbot # [ 60.089574] twistd[1073]: 2026-08-23T03:04:13+0000 [-] command '['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'2014buildbot # [ 60.092668] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command 13): startCommand:shell2015buildbot # [ 60.094502] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2016buildbot # [ 60.096848] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev 44cabc5baa515a737cac0bb1c71f0a814337a0be --branch master --repo gitea-admin/test-flake2017buildbot # [ 60.099884] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2018buildbot # [ 60.102792] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2019buildbot # [ 60.105049] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'44cabc5baa515a737cac0bb1c71f0a814337a0be', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']2020buildbot # [ 60.108328] twistd[1074]: 2026-08-23T03:04:13+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False2021buildbot # [ 60.456226] nix-daemon[1348]: accepted connection from pid 1522, user buildbot-worker2022buildbot # [ 60.494641] twistd[1074]: 2026-08-23T03:04:13+0000 [-] (command ['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3838772023buildbot # [ 60.497494] twistd[1074]: 2026-08-23T03:04:13+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4154320>2024buildbot # [ 60.501806] twistd[1073]: 2026-08-23T03:04:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=02025buildbot # [ 60.538755] twistd[1073]: 2026-08-23T03:04:13+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dc462770>, logEnviron=False)): []2026buildbot # [ 60.548104] twistd[1073]: 2026-08-23T03:04:13+0000 [-] step 'Evaluate effects' complete: success (None)2027buildbot # [ 60.579694] twistd[1073]: 2026-08-23T03:04:13+0000 [-] added buildset 5 to database2028buildbot # [ 60.628201] gitea[810]: 2026/08/23 03:04:13 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/44cabc5baa515a737cac0bb1c71f0a814337a0be for [::1]:51482, 201 Created in 51.4ms @ repo/status.go:21(repo.NewCommitStatus)2029buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2030buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2031buildbot # Dload Upload Total Spent Left Speed2032buildbot # 0 0 0 0 0 0 0 0 0100 1480 100 1480 0 0 57339 0 0100 1480 100 1480 0 0 46421 0 0100 1480 100 1480 0 0 37909 0 02033buildbot # [ 60.729421] twistd[1073]: 2026-08-23T03:04:13+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>2034buildbot # [ 60.732404] twistd[1073]: 2026-08-23T03:04:13+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild2035buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)2036buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2037buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2038buildbot # Dload Upload Total Spent Left Speed2039buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 42273 0 0100 937 100 937 0 0 33595 0 0100 937 100 937 0 0 27686 0 02040buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.09 seconds)2041buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2042buildbot # [ 60.831091] twistd[1073]: 2026-08-23T03:04:14+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2043buildbot # [ 60.835726] twistd[1073]: 2026-08-23T03:04:14+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>2044buildbot # [ 60.838400] twistd[1073]: 2026-08-23T03:04:14+0000 [-] sending ping2045buildbot # [ 60.840380] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] message from master: ping2046buildbot # [ 60.841627] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] ping finished: success2047buildbot # [ 60.865780] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [14]2048buildbot # [ 60.867019] twistd[1073]: 2026-08-23T03:04:14+0000 [-] command '['git', '--version']' in dir 'build'2049buildbot # [ 60.868610] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 14): startCommand:shell2050buildbot # [ 60.870988] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2051buildbot # [ 60.873223] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): git --version2052buildbot # [ 60.874286] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2053buildbot # [ 60.876057] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2054buildbot # [ 60.877184] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2055buildbot # [ 60.878366] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): environment:2056buildbot # [ 60.879411] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2057buildbot # [ 60.880304] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2058buildbot # [ 60.881498] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2059buildbot # [ 60.882281] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2060buildbot # [ 60.884082] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2061buildbot # [ 60.885212] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2062buildbot # [ 60.886052] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2063buildbot # [ 60.886669] twistd[1074]: 'LANG': 'en_US.UTF-8',2064buildbot # [ 60.887370] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2065buildbot # [ 60.888708] twistd[1074]: 'LOGNAME': 'buildbot-worker',2066buildbot # [ 60.890097] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2067buildbot # [ 60.892080] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2068buildbot # [ 60.893304] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2069buildbot # [ 60.894192] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2070buildbot # [ 60.912173] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2071buildbot # [ 60.913304] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2072buildbot # [ 60.913911] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2073buildbot # [ 60.915201] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2074buildbot # [ 60.915928] twistd[1074]: 'SHLVL': '0',2075buildbot # [ 60.916455] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2076buildbot # [ 60.918087] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2077buildbot # [ 60.919189] twistd[1074]: 'USER': 'buildbot-worker',2078buildbot # [ 60.919794] twistd[1074]: 'WORKER_COUNT': '0',2079buildbot # [ 60.920410] twistd[1074]: 'WORKER_NAME': 'local-worker',2080buildbot # [ 60.921057] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2081buildbot # [ 60.922161] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', '--version']): using PTY: False2082buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2083buildbot # Dload Upload Total Spent Left Speed2084buildbot # 0 0 [ 60.944076] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0597532085buildbot # [ 60.945526] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa41212b0>2086buildbot # 0 0 0 0 0 0 0100 2004 100 2004 0 0 76203 0 0100 2004 100 2004 0 0 65334 0 0100 2004 100 2004 0 0 57386 0 02087buildbot # [ 60.970657] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02088buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.15 seconds)2089buildbot # [ 60.991848] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteCommand 'stat' at 138284460510736>: RemoteCommand.run [15]2090buildbot # [ 60.994564] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 15): startCommand:stat2091buildbot # [ 60.995543] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 15): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'2092buildbot # [ 60.998262] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 15): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x725fa40d2ad0>2093buildbot # [ 61.001262] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 138284460510736> rc=22094buildbot # [ 61.010967] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteCommand 'listdir' at 138284460509136>: RemoteCommand.run [16]2095buildbot # [ 61.044574] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 16): startCommand:listdir2096buildbot # [ 61.045876] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 16): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x725fa40d2c10>2097buildbot # [ 61.049123] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 138284460509136> rc=02098buildbot # [ 61.054561] twistd[1073]: 2026-08-23T03:04:14+0000 [-] No git repo present, making full clone2099buildbot # [ 61.055965] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [17]2100buildbot # [ 61.058582] twistd[1073]: 2026-08-23T03:04:14+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'2101buildbot # [ 61.089830] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 17): startCommand:shell2102buildbot # [ 61.092054] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand2103buildbot # [ 61.094264] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake . --progress2104buildbot # [ 61.097264] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2105buildbot # [ 61.100032] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}2106buildbot # [ 61.102174] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']2107buildbot # [ 61.105407] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): environment:2108buildbot # [ 61.107460] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2109buildbot # [ 61.108279] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2110buildbot # [ 61.109228] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2111buildbot # [ 61.109894] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2112buildbot # [ 61.112173] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2113buildbot # [ 61.113283] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2114buildbot # [ 61.114123] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2115buildbot # [ 61.114744] twistd[1074]: 'LANG': 'en_US.UTF-8',2116buildbot # [ 61.115357] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2117buildbot # [ 61.116642] twistd[1074]: 'LOGNAME': 'buildbot-worker',2118buildbot # [ 61.117317] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2119buildbot # [ 61.118090] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2120buildbot # [ 61.119265] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2121buildbot # [ 61.120135] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2122buildbot # [ 61.139392] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2123buildbot # [ 61.140548] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2124buildbot # [ 61.141179] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2125buildbot # [ 61.142442] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2126buildbot # [ 61.143188] twistd[1074]: 'SHLVL': '0',2127buildbot # [ 61.143683] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2128buildbot # [ 61.144328] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2129buildbot # [ 61.146207] twistd[1074]: 'USER': 'buildbot-worker',2130buildbot # [ 61.146823] twistd[1074]: 'WORKER_COUNT': '0',2131buildbot # [ 61.147428] twistd[1074]: 'WORKER_NAME': 'local-worker',2132buildbot # [ 61.148075] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2133buildbot # [ 61.149225] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False2134buildbot # [ 61.219370] gitea[810]: 2026/08/23 03:04:14 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:52604, 200 OK in 8.6ms @ repo/githttp.go:455(repo.GetInfoRefs)2135buildbot # [ 61.230593] gitea[810]: 2026/08/23 03:04:14 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:52604, 200 OK in 8.5ms @ repo/githttp.go:433(repo.ServiceUploadPack)2136buildbot # [ 61.253354] gitea[810]: 2026/08/23 03:04:14 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:52604, 200 OK in 15.8ms @ repo/githttp.go:433(repo.ServiceUploadPack)2137buildbot # [ 61.286945] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.1939132138buildbot # [ 61.289532] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4121550>2139buildbot # [ 61.292948] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=02140buildbot # [ 61.314879] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']'>: RemoteCommand.run [18]2141buildbot # [ 61.316623] twistd[1073]: 2026-08-23T03:04:14+0000 [-] command '['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']' in dir 'build'2142buildbot # [ 61.320372] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 18): startCommand:shell2143buildbot # [ 61.321387] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): RunProcess._startCommand2144buildbot # [ 61.322903] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): git checkout -f 44cabc5baa515a737cac0bb1c71f0a814337a0be2145buildbot # [ 61.324706] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2146buildbot # [ 61.326866] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): watching logfiles {}2147buildbot # [ 61.328415] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): argv: [b'git', b'checkout', b'-f', b'44cabc5baa515a737cac0bb1c71f0a814337a0be']2148buildbot # [ 61.330479] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): environment:2149buildbot # [ 61.331989] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2150buildbot # [ 61.333164] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2151buildbot # [ 61.334147] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2152buildbot # [ 61.334874] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2153buildbot # [ 61.335744] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2154buildbot # [ 61.336879] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2155buildbot # [ 61.337738] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2156buildbot # [ 61.340088] twistd[1074]: 'LANG': 'en_US.UTF-8',2157buildbot # [ 61.340712] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2158buildbot # [ 61.342069] twistd[1074]: 'LOGNAME': 'buildbot-worker',2159buildbot # [ 61.342720] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2160buildbot # [ 61.343495] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2161buildbot # [ 61.344668] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2162buildbot # [ 61.345543] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2163buildbot # [ 61.362161] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2164buildbot # [ 61.363269] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2165buildbot # [ 61.363896] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2166buildbot # [ 61.365286] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2167buildbot # [ 61.366059] twistd[1074]: 'SHLVL': '0',2168buildbot # [ 61.366587] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2169buildbot # [ 61.368094] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2170buildbot # [ 61.369255] twistd[1074]: 'USER': 'buildbot-worker',2171buildbot # [ 61.369870] twistd[1074]: 'WORKER_COUNT': '0',2172buildbot # [ 61.370495] twistd[1074]: 'WORKER_NAME': 'local-worker',2173buildbot # [ 61.371164] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2174buildbot # [ 61.372330] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): using PTY: False2175buildbot # [ 61.392983] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command ['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): command finished with signal None, exit code 0, elapsedTime: 0.0534842176buildbot # [ 61.394891] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa47264e0>2177buildbot # [ 61.418888] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '44cabc5baa515a737cac0bb1c71f0a814337a0be']'> rc=02178buildbot # [ 61.439905] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [19]2179buildbot # [ 61.441420] twistd[1073]: 2026-08-23T03:04:14+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'2180buildbot # [ 61.444317] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 19): startCommand:shell2181buildbot # [ 61.445316] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand2182buildbot # [ 61.446754] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive2183buildbot # [ 61.448336] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2184buildbot # [ 61.450411] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}2185buildbot # [ 61.451860] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']2186buildbot # [ 61.456044] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): environment:2187buildbot # [ 61.457441] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2188buildbot # [ 61.458273] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2189buildbot # [ 61.459273] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2190buildbot # [ 61.459944] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2191buildbot # [ 61.460792] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2192buildbot # [ 61.461899] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2193buildbot # [ 61.462745] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2194buildbot # [ 61.463396] twistd[1074]: 'LANG': 'en_US.UTF-8',2195buildbot # [ 61.463976] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2196buildbot # [ 61.465332] twistd[1074]: 'LOGNAME': 'buildbot-worker',2197buildbot # [ 61.465947] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2198buildbot # [ 61.466751] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2199buildbot # [ 61.467923] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2200buildbot # [ 61.468801] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2201buildbot # [ 61.487389] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2202buildbot # [ 61.488570] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2203buildbot # [ 61.489275] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2204buildbot # [ 61.490647] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2205buildbot # [ 61.491505] twistd[1074]: 'SHLVL': '0',2206buildbot # [ 61.493654] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2207buildbot # [ 61.494420] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2208buildbot # [ 61.495590] twistd[1074]: 'USER': 'buildbot-worker',2209buildbot # [ 61.496281] twistd[1074]: 'WORKER_COUNT': '0',2210buildbot # [ 61.496915] twistd[1074]: 'WORKER_NAME': 'local-worker',2211buildbot # [ 61.497725] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2212buildbot # [ 61.498939] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False2213buildbot # [ 61.612838] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1570902214buildbot # [ 61.614718] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command 19): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa40ecc50>2215buildbot # [ 61.618072] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=02216buildbot # [ 61.634851] twistd[1073]: 2026-08-23T03:04:14+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [20]2217buildbot # [ 61.636131] twistd[1073]: 2026-08-23T03:04:14+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'2218buildbot # [ 61.638311] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command 20): startCommand:shell2219buildbot # [ 61.639292] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand2220buildbot # [ 61.643194] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD2221buildbot # [ 61.644403] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2222buildbot # [ 61.646261] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}2223buildbot # [ 61.647465] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']2224buildbot # [ 61.648799] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:2225buildbot # [ 61.649938] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2226buildbot # [ 61.650768] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2227buildbot # [ 61.651734] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2228buildbot # [ 61.652447] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2229buildbot # [ 61.653312] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2230buildbot # [ 61.654422] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2231buildbot # [ 61.655249] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2232buildbot # [ 61.655852] twistd[1074]: 'LANG': 'en_US.UTF-8',2233buildbot # [ 61.656461] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2234buildbot # [ 61.657778] twistd[1074]: 'LOGNAME': 'buildbot-worker',2235buildbot # [ 61.658435] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2236buildbot # [ 61.659193] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2237buildbot # [ 61.660391] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2238buildbot # [ 61.661259] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2239buildbot # [ 61.677848] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2240buildbot # [ 61.680115] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2241buildbot # [ 61.680754] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2242buildbot # [ 61.682045] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2243buildbot # [ 61.682799] twistd[1074]: 'SHLVL': '0',2244buildbot # [ 61.683345] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2245buildbot # [ 61.683946] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2246buildbot # [ 61.685048] twistd[1074]: 'USER': 'buildbot-worker',2247buildbot # [ 61.685666] twistd[1074]: 'WORKER_COUNT': '0',2248buildbot # [ 61.686262] twistd[1074]: 'WORKER_NAME': 'local-worker',2249buildbot # [ 61.686886] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2250buildbot # [ 61.689077] twistd[1074]: 2026-08-23T03:04:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False2251buildbot # [ 61.701933] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0599202252buildbot # [ 61.703731] twistd[1074]: 2026-08-23T03:04:14+0000 [-] (command 20): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa40ed0d0>2253buildbot # [ 61.732825] twistd[1073]: 2026-08-23T03:04:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=02254buildbot # [ 61.753181] twistd[1073]: 2026-08-23T03:04:14+0000 [-] Got Git revision 44cabc5baa515a737cac0bb1c71f0a814337a0be2255buildbot # [ 61.760718] twistd[1073]: 2026-08-23T03:04:14+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []2256buildbot # [ 61.774386] twistd[1073]: 2026-08-23T03:04:15+0000 [-] step 'git' complete: success (None)2257buildbot # [ 61.785065] twistd[1073]: 2026-08-23T03:04:15+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [21]2258buildbot # [ 61.787344] twistd[1073]: 2026-08-23T03:04:15+0000 [-] command '['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'2259buildbot # [ 61.790931] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command 21): startCommand:shell2260buildbot # [ 61.792276] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand2261buildbot # [ 61.794731] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev 44cabc5baa515a737cac0bb1c71f0a814337a0be --branch master --repo gitea-admin/test-flake test-effect2262buildbot # [ 61.798038] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2263buildbot # [ 61.802646] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}2264buildbot # [ 61.804920] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'44cabc5baa515a737cac0bb1c71f0a814337a0be', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake', b'test-effect']2265buildbot # [ 61.808280] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False2266buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2267buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2268buildbot # Dload Upload Total Spent Left Speed2269buildbot # 0 0 0 0 0 0 0 0 0100 1830 100 1830 0 0 67607 0 0100 1830 100 1830 0 0 53821 0 0100 1830 100 1830 0 0 44780 0 02270buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2271buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2272buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2273buildbot # Dload Upload Total Spent Left Speed2274buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 35068 0 0100 937 100 937 0 0 26916 0 0100 937 100 937 0 0 22712 0 02275buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.10 seconds)2276buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2277buildbot # [ 62.199149] nix-daemon[1348]: accepted connection from pid 1586, user buildbot-worker2278buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2279buildbot # Dload Upload Total Spent Left Speed2280buildbot # 0 0 0 0 0 0 [ 62.264400] twistd[1074]: 2026-08-23T03:04:15+0000 [-] (command ['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.4610422281buildbot # [ 62.267099] twistd[1074]: 2026-08-23T03:04:15+0000 [-] (command 21): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa41459c0>2282buildbot # 0 0 0[ 62.273694] twistd[1073]: 2026-08-23T03:04:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=12283buildbot # 100 2004 100 2004 0 0 58697 0 0100 2004 100 2004 0 0 49335 0 0100 2004 100 2004 0 0 42586 0 02284buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2285buildbot # [ 62.316566] twistd[1073]: 2026-08-23T03:04:15+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []2286buildbot # [ 62.324115] twistd[1073]: 2026-08-23T03:04:15+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])2287buildbot # [ 62.326036] twistd[1073]: 2026-08-23T03:04:15+0000 [-] <Build gitea-admin/test-flake/run-effect number:1 results:failure>: build finished2288buildbot # [ 62.335641] twistd[1073]: 2026-08-23T03:04:15+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2289buildbot # [ 62.451264] twistd[1073]: 2026-08-23T03:04:15+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []2290buildbot # [ 62.462410] twistd[1073]: 2026-08-23T03:04:15+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])2291buildbot # [ 62.485074] twistd[1073]: 2026-08-23T03:04:15+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [22]2292buildbot # [ 62.487419] twistd[1073]: 2026-08-23T03:04:15+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'2293buildbot # [ 62.489462] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command 22): startCommand:shell2294buildbot # [ 62.490449] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2295buildbot # [ 62.492707] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list-schedules --rev 44cabc5baa515a737cac0bb1c71f0a814337a0be --branch master --repo gitea-admin/test-flake2296buildbot # [ 62.495769] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2297buildbot # [ 62.501325] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2298buildbot # [ 62.503563] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'44cabc5baa515a737cac0bb1c71f0a814337a0be', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']2299buildbot # [ 62.506868] twistd[1074]: 2026-08-23T03:04:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False2300buildbot # [ 62.552090] gitea[810]: 2026/08/23 03:04:15 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/44cabc5baa515a737cac0bb1c71f0a814337a0be for [::1]:51482, 201 Created in 79.7ms @ repo/status.go:21(repo.NewCommitStatus)2301buildbot # [ 62.833753] nix-daemon[1348]: accepted connection from pid 1608, user buildbot-worker2302buildbot # [ 62.863491] twistd[1074]: 2026-08-23T03:04:16+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3619622303buildbot # [ 62.866049] twistd[1074]: 2026-08-23T03:04:16+0000 [-] (command 22): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa41460a0>2304buildbot # [ 62.868896] twistd[1073]: 2026-08-23T03:04:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=02305buildbot # [ 62.902117] twistd[1073]: 2026-08-23T03:04:16+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dd62afb0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dd629900>, logEnviron=False)): []2306buildbot # [ 62.913944] twistd[1073]: 2026-08-23T03:04:16+0000 [-] step 'Evaluate scheduled effects' complete: success (None)2307buildbot # [ 62.915382] twistd[1073]: 2026-08-23T03:04:16+0000 [-] <Build gitea-admin/test-flake/nix-eval number:1 results:failure>: build finished2308buildbot # [ 62.923886] twistd[1073]: 2026-08-23T03:04:16+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2309buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2310buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2311buildbot # Dload Upload Total Spent Left Speed2312buildbot # 0 0 0 0 0 0 0 0 0100 1922 100 1922 0 0 66873 0 0100 1922 100 1922 0 0 58092 0 0100 1922 100 1922 0 0 51163 0 02313buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2314buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2315buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2316buildbot # Dload Upload Total Spent Left Speed2317buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 49219 0 0100 937 100 937 0 0 39673 0 0100 937 100 937 0 0 33496 0 02318buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)2319buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2320buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2321buildbot # Dload Upload Total Spent Left Speed2322buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 103.5k 0 0100 1810 100 1810 0 0 83866 0 0100 1810 100 1810 0 0 69663 0 02323buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2324buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2325buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2326buildbot # Dload Upload Total Spent Left Speed2327buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 120.1k 0 0100 2411 100 2411 0 0 97.98k 0 0100 2411 100 2411 0 0 84792 0 02328buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.08 seconds)2329buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2330buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2331buildbot # Dload Upload Total Spent Left Speed2332buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 119.2k 0 0100 2095 100 2095 0 0 96566 0 0100 2095 100 2095 0 0 80360 0 02333buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.07 seconds)2334buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2335buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2336buildbot # Dload Upload Total Spent Left Speed2337buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 102.8k 0 0100 2004 100 2004 0 0 85066 0 0100 2004 100 2004 0 0 71789 0 02338buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2339buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2340buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2341buildbot # Dload Upload Total Spent Left Speed2342buildbot # 0 0 0 0 0 0 0 0 0100 3642 100 3642 0 0 186.8k 0 0100 3642 100 3642 0 0 147.5k 0 0100 3642 100 3642 0 0 124.7k 0 02343buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.08 seconds)2344buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2345buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2346buildbot # Dload Upload Total Spent Left Speed2347buildbot # 0 0 0 0 0 0 0 0 0100 3642 100 3642 0 0 193.6k 0 0100 3642 100 3642 0 0 155.2k 0 0100 3642 100 3642 0 0 130.5k 0 02348buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.07 seconds)2349(finished: subtest: Webhook triggers nix-eval build, in 27.08 seconds)2350subtest: PR with effects_on_pull_requests runs effects2351buildbot: must succeed: 2352 cd /tmp/test-flake2353 git checkout -b test-pr-effects2354 echo '# PR change' >> flake.nix2355 git add flake.nix2356 git commit -m 'PR to test effects on pull requests'2357 git push origin test-pr-effects2358 2359buildbot # Switched to a new branch 'test-pr-effects'2360buildbot # [ 64.035716] gitea[810]: 2026/08/23 03:04:17 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:54338, 401 Unauthorized in 1.9ms @ repo/githttp.go:455(repo.GetInfoRefs)2361buildbot # [ 64.065525] gitea[810]: 2026/08/23 03:04:17 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:54338, 200 OK in 27.3ms @ repo/githttp.go:455(repo.GetInfoRefs)2362buildbot # Enumerating objects: 5, done.2363buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.2364buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.2365buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 340 bytes | 340.00 KiB/s, done.2366buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)2367buildbot # [ 64.286506] gitea[810]: 2026/08/23 03:04:17 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 2.6ms @ private/hook_pre_receive.go:110(private.HookPreReceive)2368buildbot # [ 64.571129] gitea[810]: 2026/08/23 03:04:17 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 25.5ms @ private/hook_post_receive.go:101(private.HookPostReceive)2369buildbot # remote:2370buildbot # remote: Create a new pull request for 'test-pr-effects':2371buildbot # [ 64.588620] gitea[810]: 2026/08/23 03:04:17 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:54338, 200 OK in 496.9ms @ repo/githttp.go:438(repo.ServiceReceivePack)2372buildbot # remote: http://localhost:3742/gitea-admin/test-flake/pulls/new/test-pr-effects2373buildbot # remote:2374buildbot # To http://localhost:3742/gitea-admin/test-flake.git2375buildbot # * [new branch] test-pr-effects -> test-pr-effects2376buildbot: (finished: must succeed: 2377 cd /tmp/test-flake2378 git checkout -b test-pr-effects2379 echo '# PR change' >> flake.nix2380 git add flake.nix2381 git commit -m 'PR to test effects on pull requests'2382 git push origin test-pr-effects2383 , in 0.66 seconds)2384buildbot: must succeed: 2385 TOKEN=$(cat /tmp/gitea-token)2386 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2387 2388buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2389buildbot # Dload Upload Total Spent Left Speed2390buildbot # 0 0 0 0 0 0 0 0 0100 6455 0 6387 100 68 9126 97 [ 65.356341] gitea[810]: 2026/08/23 03:04:18 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/pulls for [::1]:54376, 201 Created in 685.8ms @ repo/pull.go:371(repo.CreatePullRequest)2391buildbot # 0100 6455 0 6387 100 68 9021 96 0100 6455 0 6387 100 68 8947 95 02392buildbot # [ 65.375734] twistd[1073]: 2026-08-23T03:04:18+0000 [_GenericHTTPChannelProtocol,71,127.0.0.1] Received event 'pull_request' from gitea2393buildbot: (finished: must succeed: 2394 TOKEN=$(cat /tmp/gitea-token)2395 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2396 , in 0.78 seconds)2397buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2398buildbot # [ 65.400831] twistd[1073]: 2026-08-23T03:04:18+0000 [-] added change with revision 57b61aa47cd0469143d3f83e1b4ae964915c22c0 to database2399buildbot # [ 65.402828] twistd[1073]: 2026-08-23T03:04:18+0000 [-] injected change 22400buildbot # [ 65.424462] twistd[1073]: 2026-08-23T03:04:18+0000 [-] added buildset 6 to database2401buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2402buildbot # Dload Upload Total Spent Left Speed2403buildbot # 0 0 0 0 0 0 0 0 0100 1922 100 1922 0 0 111.6k 0 0100 1922 100 1922 0 0 90188 0 0100 1922 100 1922 0 0 74966 0 02404buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)2405buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2406buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2407buildbot # Dload Upload Total Spent Left Speed2408buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51443 0 0100 937 100 937 0 0 39765 0 0100 937 100 937 0 0 30615 0 02409buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)2410buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2411buildbot # [ 65.560801] twistd[1073]: 2026-08-23T03:04:18+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>2412buildbot # [ 65.564286] twistd[1073]: 2026-08-23T03:04:18+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild2413buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2414buildbot # Dload Upload Total Spent Left Speed2415buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 80922 0 0100 1810 100 1810 0 0 63689 0 0100 1810 100 1810 0 0 51114 0 02416buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.11 seconds)2417buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2418buildbot # [ 65.682531] twistd[1073]: 2026-08-23T03:04:18+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2419buildbot # [ 65.686820] twistd[1073]: 2026-08-23T03:04:18+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>2420buildbot # [ 65.689521] twistd[1073]: 2026-08-23T03:04:18+0000 [-] sending ping2421buildbot # [ 65.691424] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] message from master: ping2422buildbot # [ 65.693133] twistd[1073]: 2026-08-23T03:04:18+0000 [Broker,0,127.0.0.1] ping finished: success2423buildbot # % Total % Received[ 65.718733] twistd[1073]: 2026-08-23T03:04:18+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [23]2424buildbot # [ 65.719957] twistd[1073]: 2026-08-23T03:04:18+0000 [-] command '['git', '--version']' in dir 'build'2425buildbot # % Xferd Average Speed Time Tim[ 65.724916] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command 23): startCommand:shell2426buildbot # [ 65.728056] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2427buildbot # [ 65.729289] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command ['git', '--version']): git --version2428buildbot # [ 65.730376] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2429buildbot # [ 65.732167] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2430buildbot # [ 65.733355] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2431buildbot # [ 65.734553] twistd[1074]: 2026-08-23T03:04:18+0000 [Broker,client] (command ['git', '--version']): using PTY: False2432buildbot # e Time Current2433buildbot # Dload Upload Total Spent Left Speed2434buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 58256 0 0100 2411 100 2411 0 0 50511 0 0100 [ 65.771073] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0423122435buildbot # [ 65.772557] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command 23): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa411ea30>2436buildbot # 2411 100 2411 0 0 43677 0 02437buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2438buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2439buildbot # [ 65.794042] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02440buildbot # [ 65.819817] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteCommand 'stat' at 138284460515536>: RemoteCommand.run [24]2441buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2442buildbot # Dload Upload Total Spent Left Speed2443buildbot # 0 0 0 0 0 0 0 0 [ 65.841098] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 24): startCommand:stat2444buildbot # [ 65.842110] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 24): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x725fa40d07d0>2445buildbot # [ 65.844552] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 138284460515536> rc=02446buildbot # 0100 2095 100 2095 0 0 88407 0 0100 2095 100 2095 0 0 71440 0 [ 65.861250] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteCommand 'stat' at 138284460516176>: RemoteCommand.run [25]2447buildbot # 0100 2095 100 2095 0 0 57474 0 02448buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.09 seconds)2449buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2450buildbot # [ 65.888483] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 25): startCommand:stat2451buildbot # [ 65.889736] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 25): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'2452buildbot # [ 65.893105] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 25): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x725fa46c2d70>2453buildbot # [ 65.895730] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 138284460516176> rc=22454buildbot # [ 65.909869] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']'>: RemoteCommand.run [26]2455buildbot # [ 65.912965] twistd[1073]: 2026-08-23T03:04:19+0000 [-] command '['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']' in dir 'build'2456buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2457buildbot # Dload Upload Total Spent Left Speed2458buildbot # 0 0 0 0 0 0 0 0 0[ 65.940321] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 26): startCommand:shell2459buildbot # [ 65.941371] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): RunProcess._startCommand2460buildbot # [ 65.946286] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): git fetch -f -t http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake 44cabc5baa515a737cac0bb1c71f0a814337a0be 57b61aa47cd0469143d3f83e1b4ae964915c22c0 +refs/heads/master:refs/remotes/origin/master2461buildbot # [ 65.951038] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2462buildbot # [ 65.954731] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): watching logfiles {}2463buildbot # [ 65.957725] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): argv: [b'git', b'fetch', b'-f', b'-t', b'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', b'44cabc5baa515a737cac0bb1c71f0a814337a0be', b'57b61aa47cd0469143d3f83e1b4ae964915c22c0', b'+refs/heads/master:refs/remotes/origin/master']2464buildbot # [ 65.962773] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): using PTY: False2465buildbot # 100 2004 100 2004 0 0 45641 0 0100 2004 100 2004 0 0 39840 0 0100 2004 100 2004 0 0 35496 0 02466buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2467buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2468buildbot # % Total % Received % [ 66.039224] gitea[810]: 2026/08/23 03:04:19 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:54384, 200 OK in 12.4ms @ repo/githttp.go:455(repo.GetInfoRefs)2469buildbot # Xferd Average Speed Time Time Time Current2470buildbot # Dload Upload Total Spent Left Speed2471buildbot # 0 0 0 0 0 0 0 [ 66.058088] gitea[810]: 2026/08/23 03:04:19 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:54384, 200 OK in 15.6ms @ repo/githttp.go:433(repo.ServiceUploadPack)2472buildbot # 0 0100 2004 100 2004 0 0 59577 0 0100 2004 100 2004 0 0 49479 0 0100 2004 100 2004 0 0 42224 0 02473buildbot # [ 66.092770] gitea[810]: 2026/08/23 03:04:19 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:54384, 200 OK in 30.9ms @ repo/githttp.go:433(repo.ServiceUploadPack)2474buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.10 seconds)2475buildbot # [ 66.120094] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command ['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']): command finished with signal None, exit code 0, elapsedTime: 0.1739592476buildbot # [ 66.123479] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command 26): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa411e350>2477buildbot # [ 66.129065] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', '44cabc5baa515a737cac0bb1c71f0a814337a0be', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '+refs/heads/master:refs/remotes/origin/master']'> rc=02478buildbot # [ 66.149742] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']'>: RemoteCommand.run [27]2479buildbot # [ 66.152045] twistd[1073]: 2026-08-23T03:04:19+0000 [-] command '['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']' in dir 'build'2480buildbot # [ 66.155169] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 27): startCommand:shell2481buildbot # [ 66.156151] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): RunProcess._startCommand2482buildbot # [ 66.157816] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): git checkout --detach -f 57b61aa47cd0469143d3f83e1b4ae964915c22c02483buildbot # [ 66.159911] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2484buildbot # [ 66.162358] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): watching logfiles {}2485buildbot # [ 66.164137] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): argv: [b'git', b'checkout', b'--detach', b'-f', b'57b61aa47cd0469143d3f83e1b4ae964915c22c0']2486buildbot # [ 66.167844] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): using PTY: False2487buildbot # [ 66.187496] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command ['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): command finished with signal None, exit code 0, elapsedTime: 0.0207332488buildbot # [ 66.189759] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command 27): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa40b67b0>2489buildbot # [ 66.214561] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']'> rc=02490buildbot # [ 66.238648] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']'>: RemoteCommand.run [28]2491buildbot # [ 66.242059] twistd[1073]: 2026-08-23T03:04:19+0000 [-] command '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']' in dir 'build'2492buildbot # [ 66.258520] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 28): startCommand:shell2493buildbot # [ 66.260400] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): RunProcess._startCommand2494buildbot # [ 66.264104] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): git -c user.email=buildbot@example.com -c user.name=buildbot merge --no-ff -m 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0' 44cabc5baa515a737cac0bb1c71f0a814337a0be2495buildbot # [ 66.268572] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2496buildbot # [ 66.272099] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): watching logfiles {}2497buildbot # [ 66.274981] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): argv: [b'git', b'-c', b'user.email=buildbot@example.com', b'-c', b'user.name=buildbot', b'merge', b'--no-ff', b'-m', b'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', b'44cabc5baa515a737cac0bb1c71f0a814337a0be']2498buildbot # [ 66.280260] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): using PTY: False2499buildbot # [ 66.300396] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']): command finished with signal None, exit code 0, elapsedTime: 0.0167952500buildbot # [ 66.304078] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command 28): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4178050>2501buildbot # [ 66.330760] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 44cabc5baa515a737cac0bb1c71f0a814337a0be into 57b61aa47cd0469143d3f83e1b4ae964915c22c0', '44cabc5baa515a737cac0bb1c71f0a814337a0be']'> rc=02502buildbot # [ 66.358499] twistd[1073]: 2026-08-23T03:04:19+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []2503buildbot # [ 66.372317] twistd[1073]: 2026-08-23T03:04:19+0000 [-] step 'git' complete: success (None)2504buildbot # [ 66.379208] twistd[1073]: 2026-08-23T03:04:19+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7dc4dc504910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7dc4dc50d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7dc4dc50d010>)])2505buildbot # [ 66.394464] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [29]2506buildbot # [ 66.396098] twistd[1073]: 2026-08-23T03:04:19+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'2507buildbot # [ 66.398890] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 29): startCommand:shell2508buildbot # [ 66.402561] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand2509buildbot # [ 66.404181] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'2510buildbot # [ 66.406110] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2511buildbot # [ 66.408337] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}2512buildbot # [ 66.409913] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']2513buildbot # [ 66.411971] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False2514buildbot # [ 66.450358] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0490632515buildbot # [ 66.453183] twistd[1074]: 2026-08-23T03:04:19+0000 [-] (command 29): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4133750>2516buildbot # [ 66.460875] twistd[1073]: 2026-08-23T03:04:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=02517buildbot # [ 66.468139] twistd[1073]: 2026-08-23T03:04:19+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [30]2518buildbot # [ 66.472236] twistd[1073]: 2026-08-23T03:04:19+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'2519buildbot # [ 66.499323] gitea[810]: 2026/08/23 03:04:19 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/57b61aa47cd0469143d3f83e1b4ae964915c22c0 for [::1]:51482, 201 Created in 70.7ms @ repo/status.go:21(repo.NewCommitStatus)2520buildbot # [ 66.510063] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command 30): startCommand:shell2521buildbot # [ 66.511102] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand2522buildbot # [ 66.514667] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'2523buildbot # [ 66.520209] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2524buildbot # [ 66.524337] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}2525buildbot # [ 66.527839] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']2526buildbot # [ 66.533959] twistd[1074]: 2026-08-23T03:04:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False2527buildbot # [ 66.648394] nix-daemon[1348]: accepted connection from pid 1833, user buildbot-worker2528buildbot # [ 66.932081] twistd[1073]: 2026-08-23T03:04:20+0000 [_GenericHTTPChannelProtocol,79,127.0.0.1] Received event 'push' from gitea2529buildbot # [ 66.954239] twistd[1073]: 2026-08-23T03:04:20+0000 [-] added change with revision 57b61aa47cd0469143d3f83e1b4ae964915c22c0 to database2530buildbot # [ 66.958572] twistd[1073]: 2026-08-23T03:04:20+0000 [-] injected change 32531buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2532buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2533buildbot # Dload Upload Total Spent Left Speed2534buildbot # 0 0 0 0 0 0 0 0 0100 2272 100 2272 0 0 74289 0 0100 2272 100 2272 0 0 64422 0 0100 2272 100 2272 0 0 57237 0 02535buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)2536buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2537buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2538buildbot # Dload Upload Total Spent Left Speed2539buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51438 0 0100 937 100 937 0 0 41217 0 0100 937 100 937 0 0 34654 0 02540buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2541buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2542buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2543buildbot # Dload Upload Total Spent Left Speed2544buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 101.1k 0 0100 1810 100 1810 0 0 82224 0 0100 1810 100 1810 0 0 68782 0 02545buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2546buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2547buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2548buildbot # Dload Upload Total Spent Left Speed2549buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 127.9k 0 0100 2411 100 2411 0 0 101.9k 0 0100 2411 100 2411 0 0 87883 0 02550buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2551buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2552buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2553buildbot # Dload Upload Total Spent Left Speed2554buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 118.9k 0 0100 2095 100 2095 0 0 95841 0 0100 2095 100 2095 0 0 79964 0 02555buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.07 seconds)2556buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2557buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2558buildbot # Dload Upload Total Spent Left Speed2559buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 108.0k 0 0100 2004 100 2004 0 0 88037 0 0100 2004 100 2004 0 0 73901 0 02560buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2561buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2562buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2563buildbot # Dload Upload Total Spent Left Speed2564buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 112.8k 0 0100 2004 100 2004 0 0 92036 0 0100 2004 100 2004 0 0 76811 0 02565buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2566buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2567buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2568buildbot # Dload Upload Total Spent Left Speed2569buildbot # 0 0 0 0 0 0 0 0 0100 2928 100 2928 0 0 154.4k 0 0100 2928 100 2928 0 0 123.7k 0 0100 2928 100 2928 0 0 104.2k 0 02570buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.07 seconds)2571buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2572buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2573buildbot # Dload Upload Total Spent Left Speed2574buildbot # 0 0 0 0 0 0 0 0 0100 2928 100 2928 0 0 161.1k 0 0100 2928 100 2928 0 0 128.0k 0 0100 2928 100 2928 0 0 107.3k 0 02575buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.07 seconds)2576buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2577buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2578buildbot # Dload Upload Total Spent Left Speed2579buildbot # 0 0 0 0 0 0 0 0 0100 2272 100 2272 0 0 72991 0 0100 2272 100 2272 0 0 63750 0 0100 2272 100 2272 0 0 56868 0 02580buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2581buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2582buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2583buildbot # Dload Upload Total Spent Left Speed2584buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 55094 0 0100 937 100 937 0 0 43573 0 0100 937 100 937 0 0 36270 0 02585buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2586buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2587buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2588buildbot # Dload Upload Total Spent Left Speed2589buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 104.2k 0 0100 1810 100 1810 0 0 84441 0 0100 1810 100 1810 0 0 70324 0 02590buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2591buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2592buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2593buildbot # Dload Upload Total Spent Left Speed2594buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 125.1k 0 0100 2411 100 2411 0 0 101.2k 0 0100 2411 100 2411 0 0 87516 0 02595buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2596buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2597buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2598buildbot # Dload Upload Total Spent Left Speed2599buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 116.1k 0 0100 2095 100 2095 0 0 94267 0 0100 2095 100 2095 0 0 78635 0 02600buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.07 seconds)2601buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2602buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2603buildbot # Dload Upload Total Spent Left Speed2604buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 111.4k 0 0100 2004 100 2004 0 0 90396 0 0100 2004 100 2004 0 0 75502 0 02605buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2606buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2607buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2608buildbot # Dload Upload Total Spent Left Speed2609buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 104.2k 0 0100 2004 100 2004 0 0 86390 0 0100 2004 100 2004 0 0 72700 0 02610buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2611buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2612buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2613buildbot # Dload Upload Total Spent Left Speed2614buildbot # 0 0 0 0 0 0 0 0 0100 2928 100 2928 0 0 163.2k 0 0100 2928 100 2928 0 0 129.5k 0 0100 2928 100 2928 0 0 108.0k 0 02615buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.07 seconds)2616buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2617buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2618buildbot # Dload Upload Total Spent Left Speed2619buildbot # 0 0 0 0 0 0 0 0 0100 2928 100 2928 0 0 163.3k 0 0100 2928 100 2928 0 0 129.7k 0 0100 2928 100 2928 0 0 108.4k 0 02620buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.07 seconds)2621buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2622buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2623buildbot # Dload Upload Total Spent Left Speed2624buildbot # 0 0 0 0 0 0 0 0 0100 2272 100 2272 0 0 80019 0 0100 2272 100 2272 0 0 68925 0 0100 2272 100 2272 0 0 60865 0 02625buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2626buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2627buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2628buildbot # Dload Upload Total Spent Left Speed2629buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54426 0 0100 937 100 937 0 0 43126 0 0100 937 100 937 0 0 35967 0 02630buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2631buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2632buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2633buildbot # Dload Upload Total Spent Left Speed2634buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 97.88k 0 0100 1810 100 1810 0 0 79351 0 0100 1810 100 1810 0 0 66329 0 02635buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.08 seconds)2636buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2637buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2638buildbot # Dload Upload Total Spent Left Speed2639buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 129.9k 0 0100 2411 100 2411 0 0 103.6k 0 0100 2411 100 2411 0 0 88888 0 02640buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2641buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2642buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2643buildbot # Dload Upload Total Spent Left Speed2644buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 106.5k 0 0100 2095 100 2095 0 0 88214 0 0100 2095 100 2095 0 0 74533 0 02645buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.07 seconds)2646buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2647buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2648buildbot # Dload Upload Total Spent Left Speed2649buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 106.5k 0 0100 2004 100 2004 0 0 87073 0 0100 2004 100 2004 0 0 73216 0 02650buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2651buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2652buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2653buildbot # Dload Upload Total Spent Left Speed2654buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 113.8k 0 0100 2004 100 2004 0 0 93005 0 0100 2004 100 2004 0 0 77314 0 02655buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2656buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2657buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2658buildbot # Dload Upload Total Spent Left Speed2659buildbot # 0 0 0 0 0 0 0 0 0100 2928 100 2928 0 0 98.91k 0 0100 2928 100 2928 0 0 82871 0 0100 2928 100 2928 0 0 67052 0 02660buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.10 seconds)2661buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2662buildbot # [ 71.151973] nix-daemon[1348]: accepted connection from pid 1929, user buildbot-worker2663buildbot # [ 71.163208] nix-daemon[1348]: accepted connection from pid 1833, user buildbot-worker2664buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2665buildbot # Dload Upload Total Spent Left Speed2666buildbot # 0 0[ 71.201376] twistd[1074]: 2026-08-23T03:04:24+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 4.6904752667buildbot # [ 71.205217] twistd[1074]: 2026-08-23T03:04:24+0000 [-] (command 30): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4178950>2668buildbot # 0 0 0 0 0 0 0[ 71.213809] twistd[1073]: 2026-08-23T03:04:24+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=02669buildbot # 100 2928 100 2928 0 0 80545 0 0100 2928 100 2928 0 0 70083 0 0100 2928 100 2928 0 0 61559 0 02670buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)2671buildbot # [ 71.264735] twistd[1073]: 2026-08-23T03:04:24+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7dc4dc504910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7dc4dc50d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7dc4dc50d010>)]2672buildbot # [ 71.281133] twistd[1073]: 2026-08-23T03:04:24+0000 [-] step 'Evaluate flake' complete: success (None)2673buildbot # [ 71.321818] twistd[1073]: 2026-08-23T03:04:24+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []2674buildbot # [ 71.343828] twistd[1073]: 2026-08-23T03:04:24+0000 [-] step 'build flake' complete: success (None)2675buildbot # [ 71.355426] twistd[1073]: 2026-08-23T03:04:24+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dc4eec40>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dc4eefb0>)): []2676buildbot # [ 71.367195] twistd[1073]: 2026-08-23T03:04:24+0000 [-] step 'Process skipped builds' complete: skipped (None)2677buildbot # [ 71.383409] gitea[810]: 2026/08/23 03:04:24 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/57b61aa47cd0469143d3f83e1b4ae964915c22c0 for [::1]:51482, 201 Created in 93.4ms @ repo/status.go:21(repo.NewCommitStatus)2678buildbot # [ 71.388512] twistd[1073]: 2026-08-23T03:04:24+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [31]2679buildbot # [ 71.390407] twistd[1073]: 2026-08-23T03:04:24+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'2680buildbot # [ 71.392914] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command 31): startCommand:shell2681buildbot # [ 71.395063] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand2682buildbot # [ 71.396953] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/2683buildbot # [ 71.399432] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2684buildbot # [ 71.401916] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}2685buildbot # [ 71.406126] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']2686buildbot # [ 71.408763] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False2687buildbot # [ 71.432716] twistd[1074]: 2026-08-23T03:04:24+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0271942688buildbot # [ 71.435233] twistd[1074]: 2026-08-23T03:04:24+0000 [-] (command 31): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa41786d0>2689buildbot # [ 71.459549] twistd[1073]: 2026-08-23T03:04:24+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=02690buildbot # [ 71.488718] twistd[1073]: 2026-08-23T03:04:24+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []2691buildbot # [ 71.495639] gitea[810]: 2026/08/23 03:04:24 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/57b61aa47cd0469143d3f83e1b4ae964915c22c0 for [::1]:51482, 201 Created in 69.4ms @ repo/status.go:21(repo.NewCommitStatus)2692buildbot # [ 71.505565] twistd[1073]: 2026-08-23T03:04:24+0000 [-] step 'Cleanup drv paths' complete: success (None)2693buildbot # [ 71.521023] twistd[1073]: 2026-08-23T03:04:24+0000 [-] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'>: RemoteCommand.run [32]2694buildbot # [ 71.522491] twistd[1073]: 2026-08-23T03:04:24+0000 [-] command '['git', 'show', 'origin/master:buildbot-nix.toml']' in dir 'build'2695buildbot # [ 71.524819] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command 32): startCommand:shell2696buildbot # [ 71.528688] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): RunProcess._startCommand2697buildbot # [ 71.530135] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): git show origin/master:buildbot-nix.toml2698buildbot # [ 71.531685] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2699buildbot # [ 71.533700] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): watching logfiles {}2700buildbot # [ 71.535073] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): argv: [b'git', b'show', b'origin/master:buildbot-nix.toml']2701buildbot # [ 71.536797] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): using PTY: False2702buildbot # [ 71.557443] twistd[1074]: 2026-08-23T03:04:24+0000 [-] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): command finished with signal None, exit code 0, elapsedTime: 0.0301072703buildbot # [ 71.560086] twistd[1074]: 2026-08-23T03:04:24+0000 [-] (command 32): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4178cd0>2704buildbot # [ 71.585970] twistd[1073]: 2026-08-23T03:04:24+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'> rc=02705buildbot # [ 71.593080] twistd[1073]: 2026-08-23T03:04:24+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [33]2706buildbot # [ 71.595290] twistd[1073]: 2026-08-23T03:04:24+0000 [-] command '['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']' in dir 'build'2707buildbot # [ 71.610097] gitea[810]: 2026/08/23 03:04:24 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/57b61aa47cd0469143d3f83e1b4ae964915c22c0 for [::1]:51482, 201 Created in 90.5ms @ repo/status.go:21(repo.NewCommitStatus)2708buildbot # [ 71.630975] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command 33): startCommand:shell2709buildbot # [ 71.632329] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2710buildbot # [ 71.634710] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev 57b61aa47cd0469143d3f83e1b4ae964915c22c0 --branch test-pr-effects --repo gitea-admin/test-flake2711buildbot # [ 71.637864] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2712buildbot # [ 71.642058] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2713buildbot # [ 71.644336] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'57b61aa47cd0469143d3f83e1b4ae964915c22c0', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake']2714buildbot # [ 71.647627] twistd[1074]: 2026-08-23T03:04:24+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): using PTY: False2715buildbot # [ 71.956461] nix-daemon[1348]: accepted connection from pid 1955, user buildbot-worker2716buildbot # [ 71.985298] twistd[1074]: 2026-08-23T03:04:25+0000 [-] (command ['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3439902717buildbot # [ 71.988068] twistd[1074]: 2026-08-23T03:04:25+0000 [-] (command 33): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa41793d0>2718buildbot # [ 71.992340] twistd[1073]: 2026-08-23T03:04:25+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'> rc=02719buildbot # [ 72.030379] twistd[1073]: 2026-08-23T03:04:25+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dc462770>, logEnviron=False)): []2720buildbot # [ 72.040055] twistd[1073]: 2026-08-23T03:04:25+0000 [-] step 'Evaluate effects' complete: success (None)2721buildbot # [ 72.071528] twistd[1073]: 2026-08-23T03:04:25+0000 [-] added buildset 7 to database2722buildbot # [ 72.124954] gitea[810]: 2026/08/23 03:04:25 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/57b61aa47cd0469143d3f83e1b4ae964915c22c0 for [::1]:51482, 201 Created in 55.0ms @ repo/status.go:21(repo.NewCommitStatus)2723buildbot # [ 72.191030] twistd[1073]: 2026-08-23T03:04:25+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>2724buildbot # [ 72.193397] twistd[1073]: 2026-08-23T03:04:25+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild2725buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2726buildbot # [ 72.247900] twistd[1073]: 2026-08-23T03:04:25+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2727buildbot # [ 72.252375] twistd[1073]: 2026-08-23T03:04:25+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>2728buildbot # [ 72.255109] twistd[1073]: 2026-08-23T03:04:25+0000 [-] sending ping2729buildbot # [ 72.256596] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] message from master: ping2730buildbot # [ 72.258458] twistd[1073]: 2026-08-23T03:04:25+0000 [Broker,0,127.0.0.1] ping finished: success2731buildbot # [ 72.283604] twistd[1073]: 2026-08-23T03:04:25+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [34]2732buildbot # [ 72.285070] twistd[1073]: 2026-08-23T03:04:25+0000 [-] command '['git', '--version']' in dir 'build'2733buildbot # [ 72.288172] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 34): startCommand:shell2734buildbot # [ 72.289180] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2735buildbot # [ 72.290334] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): git --version2736buildbot # [ 72.291437] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2737buildbot # [ 72.293212] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2738buildbot # [ 72.294349] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2739buildbot # [ 72.296142] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): environment:2740buildbot # [ 72.297497] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2741buildbot # [ 72.298629] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2742buildbot # [ 72.300143] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2743buildbot # [ 72.300843] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2744buildbot # [ 72.301695] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2745buildbot # [ 72.303063] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2746buildbot # [ 72.304048] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2747buildbot # [ 72.305073] twistd[1074]: 'LANG': 'en_US.UTF-8',2748buildbot # [ 72.306094] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2749buildbot # [ 72.308178] twistd[1074]: 'LOGNAME': 'buildbot-worker',2750buildbot # [ 72.308864] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2751buildbot # [ 72.309899] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2752buildbot # [ 72.311242] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2753buildbot # [ 72.312457] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2754buildbot # [ 72.330083] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2755buildbot # [ 72.331361] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2756buildbot # [ 72.332076] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2757buildbot # [ 72.334153] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2758buildbot # [ 72.334888] twistd[1074]: 'SHLVL': '0',2759buildbot # [ 72.335424] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2760buildbot # [ 72.336052] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2761buildbot # [ 72.337140] twistd[1074]: 'USER': 'buildbot-worker',2762buildbot # [ 72.337765] twistd[1074]: 'WORKER_COUNT': '0',2763buildbot # [ 72.338739] twistd[1074]: 'WORKER_NAME': 'local-worker',2764buildbot # [ 72.339515] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2765buildbot # [ 72.341198] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', '--version']): using PTY: False2766buildbot # [ 72.356077] twistd[1074]: 2026-08-23T03:04:25+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0578012767buildbot # [ 72.357570] twistd[1074]: 2026-08-23T03:04:25+0000 [-] (command 34): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4179750>2768buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2769buildbot # Dload Upload Total Spent Left Speed2770buildbot # 0 0 0 0 0 0 0 0 0100 2622 100 2622 0 0 132.9k 0 [ 72.387072] twistd[1073]: 2026-08-23T03:04:25+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02771buildbot # 0100 2622 100 2622 0 0 97872 0 0100 2622 100 2622 0 0 79611 0 02772buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)2773buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2774buildbot # [ 72.419689] twistd[1073]: 2026-08-23T03:04:25+0000 [-] <RemoteCommand 'stat' at 138284460521296>: RemoteCommand.run [35]2775buildbot # [ 72.423621] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 35): startCommand:stat2776buildbot # [ 72.424632] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 35): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'2777buildbot # [ 72.427403] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 35): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x725fa46c1ba0>2778buildbot # [ 72.429120] twistd[1073]: 2026-08-23T03:04:25+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 138284460521296> rc=22779buildbot # [ 72.443698] twistd[1073]: 2026-08-23T03:04:25+0000 [-] <RemoteCommand 'listdir' at 138284460519056>: RemoteCommand.run [36]2780buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2781buildbot # Dload Upload Total [ 72.475860] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 36): startCommand:listdir2782buildbot # [ 72.476916] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 36): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x725fa40d2fd0>2783buildbot # [ 72.478628] twistd[1073]: 2026-08-23T03:04:25+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 138284460519056> rc=02784buildbot # Spent Left Speed2785buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 35635 0 0100 937 1[ 72.498121] twistd[1073]: 2026-08-23T03:04:25+0000 [-] <RemoteShellCommand '['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']'>: RemoteCommand.run [37]2786buildbot # [ 72.499733] twistd[1073]: 2026-08-23T03:04:25+0000 [-] command '['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']' in dir 'build'2787buildbot # 00 937 0 0 30152 0 0100 937 100 937 0 0 23413 0 02788buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.10 seconds)2789buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2790buildbot # [ 72.517302] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 37): startCommand:shell2791buildbot # [ 72.518375] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): RunProcess._startCommand2792buildbot # [ 72.519895] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): git cat-file -e 57b61aa47cd0469143d3f83e1b4ae964915c22c02793buildbot # [ 72.521962] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2794buildbot # [ 72.526152] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): watching logfiles {}2795buildbot # [ 72.527732] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): argv: [b'git', b'cat-file', b'-e', b'57b61aa47cd0469143d3f83e1b4ae964915c22c0']2796buildbot # [ 72.529725] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): environment:2797buildbot # [ 72.531157] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2798buildbot # [ 72.531950] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2799buildbot # [ 72.532927] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2800buildbot # [ 72.533682] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2801buildbot # [ 72.534593] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2802buildbot # [ 72.535701] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2803buildbot # [ 72.536566] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2804buildbot # [ 72.537227] twistd[1074]: 'LANG': 'en_US.UTF-8',2805buildbot # [ 72.537795] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2806buildbot # [ 72.539123] twistd[1074]: 'LOGNAME': 'buildbot-worker',2807buildbot # [ 72.539764] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2808buildbot # [ 72.540625] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2809buildbot # [ 72.541933] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2810buildbot # [ 72.543086] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2811buildbot # [ 72.560087] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2812buildbot # [ 72.561595] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2813buildbot # [ 72.563520] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2814buildbot # [ 72.565370] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2815buildbot # [ 72.566868] twistd[1074]: 'SHLVL': '0',2816buildbot # [ 72.567514] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2817buildbot # [ 72.569084] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2818buildbot # [ 72.570188] twistd[1074]: 'USER': 'buildbot-worker',2819buildbot # [ 72.570781] twistd[1074]: 'WORKER_COUNT': '0',2820buildbot # [ 72.571391] twistd[1074]: 'WORKER_NAME': 'local-worker',2821buildbot # [ 72.572030] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2822buildbot # [ 72.573145] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): using PTY: False2823buildbot # [ 72.588665] twistd[1074]: 2026-08-23T03:04:25+0000 [-] (command ['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): command finished with signal None, exit code 1, elapsedTime: 0.0633702824buildbot # [ 72.591123] twistd[1074]: 2026-08-23T03:04:25+0000 [-] (command 37): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4179d50>2825buildbot # % Total % Received % Xferd Average Speed Time Time[ 72.620077] twistd[1073]: 2026-08-23T03:04:25+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'cat-file', '-e', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']'> rc=12826buildbot # Time Current2827buildbot # Dload Upload Total Spent Left Speed2828buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 71273 0 0100 1810 100 1810 0 0 59661 0 0100 1810 100 1810 0 0 48912 0 02829buildbot # [ 72.661102] twistd[1073]: 2026-08-23T03:04:25+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'>: RemoteCommand.run [38]2830buildbot # [ 72.663307] twistd[1073]: 2026-08-23T03:04:25+0000 [-] command '['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']' in dir 'build'2831buildbot # [ 72.665315] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command 38): startCommand:shell2832buildbot # [ 72.666279] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): RunProcess._startCommand2833buildbot # [ 72.668429] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): git fetch -f --progress http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake test-pr-effects2834buildbot # [ 72.671423] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2835buildbot # [ 72.675486] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): watching logfiles {}2836buildbot # [ 72.677936] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): argv: [b'git', b'fetch', b'-f', b'--progress', b'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', b'test-pr-effects']2837buildbot # [ 72.682284] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): environment:2838buildbot # [ 72.686032] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2839buildbot # [ 72.686860] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2840buildbot # [ 72.687826] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2841buildbot # [ 72.688535] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2842buildbot # [ 72.689386] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2843buildbot # [ 72.690506] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2844buildbot # [ 72.691384] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2845buildbot # [ 72.692072] twistd[1074]: 'LANG': 'en_US.UTF-8',2846buildbot # [ 72.692698] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2847buildbot # [ 72.694122] twistd[1074]: 'LOGNAME': 'buildbot-worker',2848buildbot # [ 72.694811] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2849buildbot # [ 72.695665] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2850buildbot # [ 72.696947] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2851buildbot # [ 72.697879] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2852buildbot # [ 72.714835] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2853buildbot # [ 72.717087] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2854buildbot # [ 72.717757] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2855buildbot # [ 72.719044] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2856buildbot # [ 72.719796] twistd[1074]: 'SHLVL': '0',2857buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.21 seconds)2858buildbot # [ 72.720529] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2859buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2860buildbot # [ 72.721158] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2861buildbot # [ 72.722195] twistd[1074]: 'USER': 'buildbot-worker',2862buildbot # [ 72.722771] twistd[1074]: 'WORKER_COUNT': '0',2863buildbot # [ 72.723377] twistd[1074]: 'WORKER_NAME': 'local-worker',2864buildbot # [ 72.723983] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2865buildbot # [ 72.726372] twistd[1074]: 2026-08-23T03:04:25+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): using PTY: False2866buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2867buildbot # Dload Upload Total Spent Left Speed2868buildbot # 0 0 0 0 0 0 0 0 [ 72.791811] gitea[810]: 2026/08/23 03:04:26 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:50220, 200 OK in 18.6ms @ repo/githttp.go:455(repo.GetInfoRefs)2869buildbot # 0100 2411 100 2411 0 0 76529 0 0100 2411 100 2411 0 0 626[ 72.812459] gitea[810]: 2026/08/23 03:04:26 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:50220, 200 OK in 15.5ms @ repo/githttp.go:433(repo.ServiceUploadPack)2870buildbot # 78 0 0100 2411 100 2411 0 0 51156 0 02871buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.11 seconds)2872buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2873buildbot # [ 72.841093] gitea[810]: 2026/08/23 03:04:26 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:50220, 200 OK in 23.9ms @ repo/githttp.go:433(repo.ServiceUploadPack)2874buildbot # [ 72.872186] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command ['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.1864302875buildbot # [ 72.874765] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command 38): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa417a050>2876buildbot # [ 72.878728] twistd[1073]: 2026-08-23T03:04:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:f7260c114bc3ae87ea516d121a164cdc3591cc60@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'> rc=02877buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2878buildbot # Dload Upload Total Spent Left Speed2879buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 91297 0 0100 2095 100 2095 0 0 70887 0 01[ 72.923521] twistd[1073]: 2026-08-23T03:04:26+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']'>: RemoteCommand.run [39]2880buildbot # 00 2095 100 2095 0 [ 72.927807] twistd[1073]: 2026-08-23T03:04:26+0000 [-] command '['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']' in dir 'build'2881buildbot # 0 60350 0 [ 72.932072] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command 39): startCommand:shell2882buildbot # [ 72.933295] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): RunProcess._startCommand2883buildbot # [ 72.935036] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): git checkout -f 57b61aa47cd0469143d3f83e1b4ae964915c22c02884buildbot # [ 72.937034] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2885buildbot # 02886buildbot # [ 72.943257] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): watching logfiles {}2887buildbot # [ 72.944795] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): argv: [b'git', b'checkout', b'-f', b'57b61aa47cd0469143d3f83e1b4ae964915c22c0']2888buildbot # [ 72.946791] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): environment:2889buildbot # [ 72.948259] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2890buildbot # [ 72.949064] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2891buildbot # [ 72.950029] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2892buildbot # [ 72.950726] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2893buildbot # [ 72.951592] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2894buildbot # [ 72.952731] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2895buildbot # [ 72.953566] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2896buildbot # [ 72.954231] twistd[1074]: 'LANG': 'en_US.UTF-8',2897buildbot # [ 72.954795] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2898buildbot # [ 72.956134] twistd[1074]: 'LOGNAME': 'buildbot-worker',2899buildbot # [ 72.956774] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2900buildbot # [ 72.957559] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2901buildbot # [ 72.959252] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2902buildbot # [ 72.960420] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2903buildbot # [ 72.978127] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2904buildbot # [ 72.979277] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2905buildbot # [ 72.979891] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2906buildbot # [ 72.981963] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2907buildbot # [ 72.983118] twistd[1074]: 'SHLVL': '0',2908buildbot # [ 72.984083] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2909buildbot # [ 72.984767] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2910buildbot # [ 72.985962] twistd[1074]: 'USER': 'buildbot-worker',2911buildbot # [ 72.986903] twistd[1074]: 'WORKER_COUNT': '0',2912buildbot # [ 72.987725] twistd[1074]: 'WORKER_NAME': 'local-worker',2913buildbot # [ 72.988623] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2914buildbot # [ 72.990062] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): using PTY: False2915buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.16 seconds)2916buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2917buildbot # [ 73.013482] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command ['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']): command finished with signal None, exit code 0, elapsedTime: 0.0711572918buildbot # [ 73.016140] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command 39): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa417a350>2919buildbot # [ 73.035957] twistd[1073]: 2026-08-23T03:04:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '57b61aa47cd0469143d3f83e1b4ae964915c22c0']'> rc=02920buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2921buildbot # Dload Upload Total Spent Left Speed2922buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 79378 0 0100 2004 100 2004 0 0 66081 0 0100 2004 100 2004 0[ 73.085562] twistd[1073]: 2026-08-23T03:04:26+0000 [-] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'>: RemoteCommand.run [40]2923buildbot # 0 53902 0 [ 73.091143] twistd[1073]: 2026-08-23T03:04:26+0000 [-] command '['git', 'checkout', '-B', 'test-pr-effects']' in dir 'build'2924buildbot # [ 73.092406] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command 40): startCommand:shell2925buildbot # [ 73.093398] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): RunProcess._startCommand2926buildbot # [ 73.094739] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): git checkout -B test-pr-effects2927buildbot # [ 73.096117] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2928buildbot # [ 73.098112] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): watching logfiles {}2929buildbot # [ 73.099455] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): argv: [b'git', b'checkout', b'-B', b'test-pr-effects']2930buildbot # 02931buildbot # [ 73.105991] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): environment:2932buildbot # [ 73.107351] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2933buildbot # [ 73.108154] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2934buildbot # [ 73.109093] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2935buildbot # [ 73.109799] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2936buildbot # [ 73.110631] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2937buildbot # [ 73.111743] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2938buildbot # [ 73.112600] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2939buildbot # [ 73.113292] twistd[1074]: 'LANG': 'en_US.UTF-8',2940buildbot # [ 73.113900] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2941buildbot # [ 73.115287] twistd[1074]: 'LOGNAME': 'buildbot-worker',2942buildbot # [ 73.115912] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2943buildbot # [ 73.116721] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2944buildbot # [ 73.117945] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2945buildbot # [ 73.118922] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2946buildbot # [ 73.136077] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2947buildbot # [ 73.137881] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2948buildbot # [ 73.138735] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2949buildbot # [ 73.140206] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2950buildbot # [ 73.141240] twistd[1074]: 'SHLVL': '0',2951buildbot # [ 73.141890] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2952buildbot # [ 73.142737] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2953buildbot # [ 73.144084] twistd[1074]: 'USER': 'buildbot-worker',2954buildbot # [ 73.144961] twistd[1074]: 'WORKER_COUNT': '0',2955buildbot # [ 73.146078] twistd[1074]: 'WORKER_NAME': 'local-worker',2956buildbot # [ 73.146779] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2957buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.15 seconds)2958buildbot # [ 73.148167] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): using PTY: False2959buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2960buildbot # [ 73.170143] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command ['git', 'checkout', '-B', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.0657802961buildbot # [ 73.171834] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command 40): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa417a750>2962buildbot # [ 73.195755] twistd[1073]: 2026-08-23T03:04:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'> rc=02963buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2964buildbot # Dload Upload Total Spent Left Speed2965buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 82073 0 0100 2004 100 2004 0 0 65041 0 0100 2004 100 2004 0 0 54311 0[ 73.242566] twistd[1073]: 2026-08-23T03:04:26+0000 [-] <RemoteShellCommand '['git', 'submodule', 'sync']'>: RemoteCommand.run [41]2966buildbot # [ 73.243871] twistd[1073]: 2026-08-23T03:04:26+0000 [-] command '['git', 'submodule', 'sync']' in dir 'build'2967buildbot # [ 73.246239] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command 41): startCommand:shell2968buildbot # 02969buildbot # [ 73.250056] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): RunProcess._startCommand2970buildbot # [ 73.251326] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): git submodule sync2971buildbot # [ 73.252512] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2972buildbot # [ 73.254351] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): watching logfiles {}2973buildbot # [ 73.255548] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): argv: [b'git', b'submodule', b'sync']2974buildbot # [ 73.257173] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): environment:2975buildbot # [ 73.261089] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2976buildbot # [ 73.261925] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2977buildbot # [ 73.262915] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',2978buildbot # [ 73.263624] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',2979buildbot # [ 73.264481] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2980buildbot # [ 73.265627] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2981buildbot # [ 73.266485] twistd[1074]: 'JOURNAL_STREAM': '9:10255',2982buildbot # [ 73.267649] twistd[1074]: 'LANG': 'en_US.UTF-8',2983buildbot # [ 73.268331] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',2984buildbot # [ 73.269651] twistd[1074]: 'LOGNAME': 'buildbot-worker',2985buildbot # [ 73.270334] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2986buildbot # [ 73.271088] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2987buildbot # [ 73.272266] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2988buildbot # [ 73.273109] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',2989buildbot # [ 73.293084] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2990buildbot # [ 73.294305] twistd[1074]: 'PYTHONNOUSERSITE': 'true',2991buildbot # [ 73.294939] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',2992buildbot # [ 73.296308] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',2993buildbot # [ 73.297087] twistd[1074]: 'SHLVL': '0',2994buildbot # [ 73.297632] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',2995buildbot # [ 73.298551] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',2996buildbot # [ 73.299893] twistd[1074]: 'USER': 'buildbot-worker',2997buildbot # [ 73.300620] twistd[1074]: 'WORKER_COUNT': '0',2998buildbot # [ 73.301991] twistd[1074]: 'WORKER_NAME': 'local-worker',2999buildbot # [ 73.304177] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}3000buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.16 seconds)3001buildbot # [ 73.305639] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'sync']): using PTY: False3002buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3003buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3004buildbot # Dload Upload Total Spent Left Speed3005buildbot # 0 0 0 0 0 0 0 0 0100 3336 100 3336 0 0 120.8k 0 0100 3336 100 3336 0 0 97197 0 0100 3336 100 3336 0 0 79181 0 03006buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.10 seconds)3007buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3008buildbot # [ 73.448775] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command ['git', 'submodule', 'sync']): command finished with signal None, exit code 0, elapsedTime: 0.1884643009buildbot # [ 73.451121] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command 41): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4179050>3010buildbot # [ 73.454257] twistd[1073]: 2026-08-23T03:04:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'sync']'> rc=03011buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3012buildbot # Dload Upload Total Spent Left Speed3013buildbot # 0 0 0 0 0 0 0 0 0100 3336 100 3336 0 0 148.5k 0 0100 3336 100 3336 0 0 116.0k 0 0100 3336 100 3336 0 0 96917 0 03014buildbot # [ 73.499206] twistd[1073]: 2026-08-23T03:04:26+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'>: RemoteCommand.run [42]3015buildbot # [ 73.500910] twistd[1073]: 2026-08-23T03:04:26+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']' in dir 'build'3016buildbot # [ 73.505291] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command 42): startCommand:shell3017buildbot # [ 73.506355] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): RunProcess._startCommand3018buildbot # [ 73.508030] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): git submodule update --init --recursive --force --checkout3019buildbot # [ 73.509982] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)3020buildbot # [ 73.512343] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): watching logfiles {}3021buildbot # [ 73.514023] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive', b'--force', b'--checkout']3022buildbot # [ 73.516280] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): environment:3023buildbot # [ 73.518781] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',3024buildbot # [ 73.519646] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',3025buildbot # [ 73.520623] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',3026buildbot # [ 73.521351] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',3027buildbot # [ 73.522167] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',3028buildbot # [ 73.523270] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3029buildbot # [ 73.524089] twistd[1074]: 'JOURNAL_STREAM': '9:10255',3030buildbot # [ 73.524728] twistd[1074]: 'LANG': 'en_US.UTF-8',3031buildbot # [ 73.525630] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',3032buildbot # [ 73.527125] twistd[1074]: 'LOGNAME': 'buildbot-worker',3033buildbot # [ 73.527831] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',3034buildbot # [ 73.528655] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',3035buildbot # [ 73.529935] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3036buildbot # [ 73.531077] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',3037buildbot # [ 73.548859] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',3038buildbot # [ 73.551111] twistd[1074]: 'PYTHONNOUSERSITE': 'true',3039buildbot # [ 73.551765] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',3040buildbot # [ 73.553070] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',3041buildbot # [ 73.553823] twistd[1074]: 'SHLVL': '0',3042buildbot # [ 73.554392] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',3043buildbot # [ 73.555073] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',3044buildbot # [ 73.556293] twistd[1074]: 'USER': 'buildbot-worker',3045buildbot # [ 73.556935] twistd[1074]: 'WORKER_COUNT': '0',3046buildbot # [ 73.557578] twistd[1074]: 'WORKER_NAME': 'local-worker',3047buildbot # [ 73.558434] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}3048buildbot # [ 73.559780] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): using PTY: False3049buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.16 seconds)3050buildbot # [ 73.671944] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): command finished with signal None, exit code 0, elapsedTime: 0.1676413051buildbot # [ 73.674378] twistd[1074]: 2026-08-23T03:04:26+0000 [-] (command 42): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa4179fd0>3052buildbot # [ 73.677722] twistd[1073]: 2026-08-23T03:04:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'> rc=03053buildbot # [ 73.694412] twistd[1073]: 2026-08-23T03:04:26+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [43]3054buildbot # [ 73.695855] twistd[1073]: 2026-08-23T03:04:26+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'3055buildbot # [ 73.699228] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command 43): startCommand:shell3056buildbot # [ 73.700206] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand3057buildbot # [ 73.701414] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD3058buildbot # [ 73.702594] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)3059buildbot # [ 73.704448] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}3060buildbot # [ 73.705670] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']3061buildbot # [ 73.707103] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:3062buildbot # [ 73.708568] twistd[1074]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',3063buildbot # [ 73.709447] twistd[1074]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',3064buildbot # [ 73.710436] twistd[1074]: 'HOME': '/var/lib/buildbot-worker',3065buildbot # [ 73.711152] twistd[1074]: 'INVOCATION_ID': 'a9b7a497fa3e4587a2be8c3ba9c1cd4e',3066buildbot # [ 73.711986] twistd[1074]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',3067buildbot # [ 73.713149] twistd[1074]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3068buildbot # [ 73.713991] twistd[1074]: 'JOURNAL_STREAM': '9:10255',3069buildbot # [ 73.716343] twistd[1074]: 'LANG': 'en_US.UTF-8',3070buildbot # [ 73.716955] twistd[1074]: 'LOCALE_ARCHIVE': '/nix/store/c59mcax29xrwyfdqs308wkmn2srnmzkn-glibc-locales-2.42-67/lib/locale/locale-archive',3071buildbot # [ 73.718364] twistd[1074]: 'LOGNAME': 'buildbot-worker',3072buildbot # [ 73.719022] twistd[1074]: 'MASTER_URL': 'tcp:host=localhost:port=9989',3073buildbot # [ 73.719791] twistd[1074]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',3074buildbot # [ 73.720980] twistd[1074]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3075buildbot # [ 73.721857] twistd[1074]: 'PATH': '/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin:/nix/store/9p224c95k7m3cf01qa95gnxdv3lkkryw-python3.14-twisted-26.4.0/bin:/nix/store/xxwbmal9s8vnm5n1nv5rgxhhk49wlyw2-python3.14-automat-25.4.16/bin:/nix/store/5gnzi47n1l509jvifq0gxpvxcdpmi8fa-python3.14-idna-3.18/bin:/nix/store/zp358ag9cmg5w7iyxzq61zaizcd67qwf-python3.14-incremental-24.11.0/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/bin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/bin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/bin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/bin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/bin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/bin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/bin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/bin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/bin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/bin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/bin:/nix/store/nfdfl8kf8kd2na67krwmbvd51y0ylnir-cachix-1.11.1-bin/sbin:/nix/store/8wxs6573l730vxkqd6wp58kvxa19csll-git-2.55.0/sbin:/nix/store/aw4kb88y82xv4pl48lb388mhs48iq7iv-openssh-10.5p1/sbin:/nix/store/j02vvifyzjw52xqrvyj1bhd8s45yn1fl-nix-2.34.8/sbin:/nix/store/90nk33c4fkyg4x4dfk5cykqiryf2nlqq-bash-interactive-5.3p15/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/rrvy9r23ca5nhbma3fmghf22b5a4n1wc-nix-eval-jobs-2.35.1/sbin:/nix/store/iyxxhg9ml6f9xz939wjiasmsni3wxpv2-buildbot-effects/sbin:/nix/store/97d5ygrvqj55f4nx1x34wfdcc7qn11c0-coreutils-9.11/sbin:/nix/store/ibg16grw5is7i7ilnflc5xmj6fwksqkl-findutils-4.11.0/sbin:/nix/store/4dgym2zhac9vy0vrih4gsplh0wpfl13m-gnugrep-3.12/sbin:/nix/store/rxd8p6g4k4s0sx4q1szmzvp9rsmhmfys-gnused-4.10/sbin:/nix/store/mc901k2s1n3v1disrj0356l7lwz7l6vg-systemd-261.1/sbin',3076buildbot # [ 73.738731] twistd[1074]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',3077buildbot # [ 73.739879] twistd[1074]: 'PYTHONNOUSERSITE': 'true',3078buildbot # [ 73.740526] twistd[1074]: 'PYTHONPATH': '/nix/store/d122zr2j847c5271rjjbwbrrz6x8fs6k-python3-3.14.7-env/lib/python3.14/site-packages',3079buildbot # [ 73.742073] twistd[1074]: 'SHELL': '/run/current-system/sw/bin/bash',3080buildbot # [ 73.742862] twistd[1074]: 'SHLVL': '0',3081buildbot # [ 73.744084] twistd[1074]: 'SYSTEMD_EXEC_PID': '1074',3082buildbot # [ 73.744742] twistd[1074]: 'TZDIR': '/nix/store/vlgjd2179ahfh509p1aid8fl22bw8ri3-tzdata-2026c/share/zoneinfo',3083buildbot # [ 73.745827] twistd[1074]: 'USER': 'buildbot-worker',3084buildbot # [ 73.746474] twistd[1074]: 'WORKER_COUNT': '0',3085buildbot # [ 73.747056] twistd[1074]: 'WORKER_NAME': 'local-worker',3086buildbot # [ 73.747729] twistd[1074]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}3087buildbot # [ 73.748883] twistd[1074]: 2026-08-23T03:04:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False3088buildbot # [ 73.764124] twistd[1074]: 2026-08-23T03:04:27+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0495763089buildbot # [ 73.765929] twistd[1074]: 2026-08-23T03:04:27+0000 [-] (command 43): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa417ab50>3090buildbot # [ 73.793818] twistd[1073]: 2026-08-23T03:04:27+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=03091buildbot # [ 73.814236] twistd[1073]: 2026-08-23T03:04:27+0000 [-] Got Git revision 57b61aa47cd0469143d3f83e1b4ae964915c22c03092buildbot # [ 73.822040] twistd[1073]: 2026-08-23T03:04:27+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []3093buildbot # [ 73.836432] twistd[1073]: 2026-08-23T03:04:27+0000 [-] step 'git' complete: success (None)3094buildbot # [ 73.847572] twistd[1073]: 2026-08-23T03:04:27+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [44]3095buildbot # [ 73.849928] twistd[1073]: 2026-08-23T03:04:27+0000 [-] command '['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'3096buildbot # [ 73.855797] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command 44): startCommand:shell3097buildbot # [ 73.856826] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand3098buildbot # [ 73.859120] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev 57b61aa47cd0469143d3f83e1b4ae964915c22c0 --branch test-pr-effects --repo gitea-admin/test-flake test-effect3099buildbot # [ 73.862275] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)3100buildbot # [ 73.865169] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}3101buildbot # [ 73.867495] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'57b61aa47cd0469143d3f83e1b4ae964915c22c0', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake', b'test-effect']3102buildbot # [ 73.871113] twistd[1074]: 2026-08-23T03:04:27+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False3103buildbot # [ 74.197645] nix-daemon[1348]: accepted connection from pid 2065, user buildbot-worker3104buildbot # [ 74.236816] twistd[1074]: 2026-08-23T03:04:27+0000 [-] (command ['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.3821223105buildbot # [ 74.239760] twistd[1074]: 2026-08-23T03:04:27+0000 [-] (command 44): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x725fa417b3d0>3106buildbot # [ 74.243935] twistd[1073]: 2026-08-23T03:04:27+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '57b61aa47cd0469143d3f83e1b4ae964915c22c0', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=13107buildbot # [ 74.275666] twistd[1073]: 2026-08-23T03:04:27+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []3108buildbot # [ 74.282810] twistd[1073]: 2026-08-23T03:04:27+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])3109buildbot # [ 74.284312] twistd[1073]: 2026-08-23T03:04:27+0000 [-] <Build gitea-admin/test-flake/run-effect number:2 results:failure>: build finished3110buildbot # [ 74.293471] twistd[1073]: 2026-08-23T03:04:27+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []3111buildbot # [ 74.412036] twistd[1073]: 2026-08-23T03:04:27+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []3112buildbot # [ 74.424118] twistd[1073]: 2026-08-23T03:04:27+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])3113buildbot # [ 74.442418] twistd[1073]: 2026-08-23T03:04:27+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7dc4dc467a10>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dd62afb0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7dc4dd629900>, logEnviron=False)): []3114buildbot # [ 74.455201] twistd[1073]: 2026-08-23T03:04:27+0000 [-] step 'Evaluate scheduled effects' complete: skipped (None)3115buildbot # [ 74.456809] twistd[1073]: 2026-08-23T03:04:27+0000 [-] <Build gitea-admin/test-flake/nix-eval number:2 results:failure>: build finished3116buildbot # [ 74.467072] twistd[1073]: 2026-08-23T03:04:27+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []3117buildbot # [ 74.548375] gitea[810]: 2026/08/23 03:04:27 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/57b61aa47cd0469143d3f83e1b4ae964915c22c0 for [::1]:51482, 201 Created in 113.9ms @ repo/status.go:21(repo.NewCommitStatus)3118buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds3119buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3120buildbot # Dload Upload Total Spent Left Speed3121buildbot # 0 0 0 0 0 0 0 0 0100 2714 100 2714 0 0 145.5k 0 0100 2714 100 2714 0 0 115.6k 0 0100 2714 100 2714 0 0 99344 0 03122buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)3123buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties3124buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3125buildbot # Dload Upload Total Spent Left Speed3126buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 51608 0 0100 937 100 937 0 0 41354 0 0100 937 100 937 0 0 34669 0 03127buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)3128buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties3129buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3130buildbot # Dload Upload Total Spent Left Speed3131buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 102.1k 0 0100 1810 100 1810 0 0 81793 0 0100 1810 100 1810 0 0 68402 0 03132buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.08 seconds)3133buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties3134buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3135buildbot # Dload Upload Total Spent Left Speed3136buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 119.5k 0 0100 2411 100 2411 0 0 99185 0 0100 2411 100 2411 0 0 84147 0 03137buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.08 seconds)3138buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties3139buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3140buildbot # Dload Upload Total Spent Left Speed3141buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 116.8k 0 0100 2095 100 2095 0 0 94839 0 0100 2095 100 2095 0 0 79080 0 03142buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.07 seconds)3143buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties3144buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3145buildbot # Dload Upload Total Spent Left Speed3146buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 101.6k 0 0100 2004 100 2004 0 0 83768 0 0100 2004 100 2004 0 0 70695 0 03147buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)3148buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties3149buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3150buildbot # Dload Upload Total Spent Left Speed3151buildbot # 0 0 0 0 0 0 0 0 0100 2004 100 2004 0 0 111.3k 0 0100 2004 100 2004 0 0 90384 0 0100 2004 100 2004 0 0 75500 0 03152buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)3153buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/7/properties3154buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3155buildbot # Dload Upload Total Spent Left Speed3156buildbot # 0 0 0 0 0 0 0 0 0100 2104 100 2104 0 0 109.9k 0 0100 2104 100 2104 0 0 90619 0 0100 2104 100 2104 0 0 76331 0 03157buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/7/properties, in 0.07 seconds)3158buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3159buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3160buildbot # Dload Upload Total Spent Left Speed3161buildbot # 0 0 0 0 0 0 0 0 0100 3336 100 3336 0 0 183.3k 0 0100 3336 100 3336 0 0 147.1k 0 0100 3336 100 3336 0 0 122.9k 0 03162buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.07 seconds)3163buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3164buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3165buildbot # Dload Upload Total Spent Left Speed3166buildbot # 0 0 0 0 0 0 0 0 0100 3336 100 3336 0 0 168.2k 0 0100 3336 100 3336 0 0 136.2k 0 0100 3336 100 3336 0 0 115.3k 0 03167buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.07 seconds)3168buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps3169buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3170buildbot # Dload Upload Total Spent Left Speed3171buildbot # 0 0 0 0 0 0 0 0 0100 3522 100 3522 0 0 176.6k 0 0100 3522 100 3522 0 0 143.2k 0 0100 3522 100 3522 0 0 121.2k 0 03172buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps, in 0.07 seconds)3173buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps3174buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3175buildbot # Dload Upload Total Spent Left Speed3176buildbot # 0 0 0 0 0 0 0 0 0100 3522 100 3522 0 0 188.7k 0 0100 3522 100 3522 0 0 150.9k 0 0100 3522 100 3522 0 0 126.6k 0 03177buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps, in 0.07 seconds)3178(finished: subtest: PR with effects_on_pull_requests runs effects, in 11.53 seconds)3179(finished: run the VM test script, in 76.56 seconds)3180test script finished in 76.60s3181cleanup3182kill QemuMachine (pid 45)3183buildbot # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14)3184(finished: cleanup, in 0.31 seconds)3185additionally exposed symbols:3186 buildbot,3187 vlan1,3188 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh3189Token created: f7260c114b...3190{'meta': {'total': 0}, 'projects': []}3191Project not yet registered, current projects: []3192{'meta': {'total': 0}, 'projects': []}3193Project not yet registered, current projects: []3194{'meta': {'total': 1},3195 'projects': [{'active': None,3196 'description': None,3197 'description_format': None,3198 'description_html': None,3199 'name': 'gitea-admin/test-flake',3200 'projectid': 1,3201 'slug': 'gitea-admin/test-flake'}]}3202nix-eval build not found yet3203nix-eval build not found yet3204nix-eval build not found yet3205nix-eval build not found yet3206nix-eval build not found yet3207nix-eval build not found yet3208nix-eval build still running3209nix-eval build still running3210nix-eval build still running3211nix-eval build still running3212nix-eval build still running3213nix-eval build still running3214nix-eval build still running3215nix-eval build still running3216nix-eval build still running3217nix-eval build still running3218nix-eval build still running3219nix-eval build still running3220nix-eval build still running3221nix-eval build still running3222nix-eval build still running3223nix-eval build completed with result: 23224PR eval build not found yet3225PR eval build still running3226PR eval build still running3227PR eval build still running3228PR eval build still running3229PR eval build result: 2