vm-test-run-scheduled-effects
checks.x86_64-linux.scheduled-effects
· build #56
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 45)12buildbot # Formatting '/build/vm-state-buildbot/tmp.VuyEzIfDZn', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 70937099-3064-4e19-ba7a-6fd8e4d000d517buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:02.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:08.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.45 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Aug 19 16:18:21 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4i8hxlg7y03hljs5wsb0a0z3xk3awds6-nixos-system-buildbot-test/init regInfo=/nix/store/70c2hplgh4azrv9wg5nq8v20qw69nik6-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved51buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved52buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved53buildbot # [ 0.000000] NX (Execute Disable) protection: active54buildbot # [ 0.000000] APIC: Static calls initialized55buildbot # [ 0.000000] SMBIOS 2.8 present.56buildbot # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201457buildbot # [ 0.000000] DMI: Memory slots populated: 1/158buildbot # [ 0.000000] Hypervisor detected: KVM59buildbot # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000060buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0061buildbot # [ 0.000000] kvm-clock: using sched offset of 501830686 cycles62buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns63buildbot # [ 0.000004] tsc: Detected 2400.008 MHz processor64buildbot # [ 0.000812] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000065buildbot # [ 0.000839] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs66buildbot # [ 0.000841] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT67buildbot # [ 0.002739] found SMP MP-table at [mem 0x000f5450-0x000f545f]68buildbot # [ 0.002750] Using GB pages for direct mapping69buildbot # [ 0.002830] RAMDISK: [mem 0x3e34c000-0x3ffcffff]70buildbot # [ 0.002837] ACPI: Early table checksum verification disabled71buildbot # [ 0.002840] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )72buildbot # [ 0.002844] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002848] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001)74buildbot # [ 0.002855] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002857] ACPI: FACS 0x000000003FFE0000 00004076buildbot # [ 0.002859] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002860] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)78buildbot # [ 0.002862] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)79buildbot # [ 0.002863] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)80buildbot # [ 0.002865] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d]81buildbot # [ 0.002866] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219]82buildbot # [ 0.002866] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]83buildbot # [ 0.002867] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385]84buildbot # [ 0.002867] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd]85buildbot # [ 0.002868] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9]86buildbot # [ 0.002868] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421]87buildbot # [ 0.003087] No NUMA configuration found88buildbot # [ 0.003088] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff]89buildbot # [ 0.003090] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff]90buildbot # [ 0.005567] Zone ranges:91buildbot # [ 0.005567] DMA [mem 0x0000000000001000-0x0000000000ffffff]92buildbot # [ 0.005569] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff]93buildbot # [ 0.005570] Normal empty94buildbot # [ 0.005571] Device empty95buildbot # [ 0.005572] Movable zone start for each node96buildbot # [ 0.005573] Early memory node ranges97buildbot # [ 0.005573] node 0: [mem 0x0000000000001000-0x000000000009efff]98buildbot # [ 0.005574] node 0: [mem 0x0000000000100000-0x000000003ffd7fff]99buildbot # [ 0.005575] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]100buildbot # [ 0.005596] On node 0, zone DMA: 1 pages in unavailable ranges101buildbot # [ 0.005884] On node 0, zone DMA: 97 pages in unavailable ranges102buildbot # [ 0.025334] On node 0, zone DMA32: 40 pages in unavailable ranges103buildbot # [ 0.025780] ACPI: PM-Timer IO Port: 0x608104buildbot # [ 0.025791] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])105buildbot # [ 0.025819] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23106buildbot # [ 0.025822] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)107buildbot # [ 0.025824] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)108buildbot # [ 0.025825] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)109buildbot # [ 0.025826] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)110buildbot # [ 0.025827] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)111buildbot # [ 0.025829] ACPI: Using ACPI (MADT) for SMP configuration information112buildbot # [ 0.025830] ACPI: HPET id: 0x8086a201 base: 0xfed00000113buildbot # [ 0.025833] TSC deadline timer available114buildbot # [ 0.025837] CPU topo: Max. logical packages: 1115buildbot # [ 0.025838] CPU topo: Max. logical dies: 1116buildbot # [ 0.025839] CPU topo: Max. dies per package: 1117buildbot # [ 0.025842] CPU topo: Max. threads per core: 1118buildbot # [ 0.025842] CPU topo: Num. cores per package: 1119buildbot # [ 0.025843] CPU topo: Num. threads per package: 1120buildbot # [ 0.025843] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs121buildbot # [ 0.025862] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()122buildbot # [ 0.025894] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]123buildbot # [ 0.025895] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]124buildbot # [ 0.025897] [mem 0x40000000-0xafffffff] available for PCI devices125buildbot # [ 0.025898] Booting paravirtualized kernel on KVM126buildbot # [ 0.025901] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns127buildbot # [ 0.030364] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1128buildbot # [ 0.032704] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152129buildbot # [ 0.032748] kvm-guest: PV spinlocks disabled, single CPU130buildbot # [ 0.032749] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/4i8hxlg7y03hljs5wsb0a0z3xk3awds6-nixos-system-buildbot-test/init regInfo=/nix/store/70c2hplgh4azrv9wg5nq8v20qw69nik6-closure-info/registration console=ttyS0,115200n8 console=tty0131buildbot # [ 0.032844] Unknown kernel command line parameters "regInfo=/nix/store/70c2hplgh4azrv9wg5nq8v20qw69nik6-closure-info/registration", will be passed to user space.132buildbot # [ 0.032857] random: crng init done133buildbot # [ 0.032857] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes134buildbot # [ 0.034013] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)135buildbot # [ 0.034026] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)136buildbot # [ 0.034055] Fallback order for Node 0: 0137buildbot # [ 0.034058] Built 1 zonelists, mobility grouping on. Total pages: 262006138buildbot # [ 0.034059] Policy zone: DMA32139buildbot # [ 0.036370] mem auto-init: stack:all(zero), heap alloc:on, heap free:off140buildbot # [ 0.039461] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1141buildbot # [ 0.041868] allocated 2097152 bytes of page_ext142buildbot # [ 0.051754] ftrace: allocating 48728 entries in 192 pages143buildbot # [ 0.051756] ftrace: allocated 192 pages with 2 groups144buildbot # [ 0.052618] Dynamic Preempt: lazy145buildbot # [ 0.052809] rcu: Preemptible hierarchical RCU implementation.146buildbot # [ 0.052810] rcu: RCU event tracing is enabled.147buildbot # [ 0.052811] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.148buildbot # [ 0.052812] Trampoline variant of Tasks RCU enabled.149buildbot # [ 0.052813] Rude variant of Tasks RCU enabled.150buildbot # [ 0.052813] Tracing variant of Tasks RCU enabled.151buildbot # [ 0.052814] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.152buildbot # [ 0.052814] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1153buildbot # [ 0.052829] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.154buildbot # [ 0.052831] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.155buildbot # [ 0.052832] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.156buildbot # [ 0.057240] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16157buildbot # [ 0.057519] rcu: srcu_init: Setting srcu_struct sizes based on contention.158buildbot # [ 0.057525] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns159buildbot # [ 0.057629] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)160buildbot # [ 0.061124] Console: colour VGA+ 80x25161buildbot # [ 0.061127] printk: legacy console [tty0] enabled162buildbot # [ 0.090603] printk: legacy console [ttyS0] enabled163buildbot # [ 0.187828] ACPI: Core revision 20250807164buildbot # [ 0.188755] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns165buildbot # [ 0.190257] APIC: Switch to symmetric I/O mode setup166buildbot # [ 0.191242] x2apic enabled167buildbot # [ 0.192016] APIC: Switched APIC routing to: physical x2apic168buildbot # [ 0.193841] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1169buildbot # [ 0.194768] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns170buildbot # [ 0.196373] Calibrating delay loop (skipped) preset value.. 4800.01 BogoMIPS (lpj=2400008)171buildbot # [ 0.197458] x86/cpu: User Mode Instruction Prevention (UMIP) activated172buildbot # [ 0.198539] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127173buildbot # [ 0.199370] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0174buildbot # [ 0.200373] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto175buildbot # [ 0.201370] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl176buildbot # [ 0.203370] Transient Scheduler Attacks: Vulnerable: No microcode177buildbot # [ 0.204370] Spectre V2 : Mitigation: Enhanced / Automatic IBRS178buildbot # [ 0.205370] Speculative Return Stack Overflow: Mitigation: Safe RET179buildbot # [ 0.206369] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization180buildbot # [ 0.208377] Spectre V2 : Enabling IBPB for BPF181buildbot # [ 0.209053] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier182buildbot # [ 0.210370] active return thunk: srso_alias_return_thunk183buildbot # [ 0.211397] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'184buildbot # [ 0.212370] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'185buildbot # [ 0.213370] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'186buildbot # [ 0.214370] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'187buildbot # [ 0.215369] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'188buildbot # [ 0.216369] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'189buildbot # [ 0.217370] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'190buildbot # [ 0.218370] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256191buildbot # [ 0.219370] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64192buildbot # [ 0.220369] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512193buildbot # [ 0.221370] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024194buildbot # [ 0.222369] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8195buildbot # [ 0.223370] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.196buildbot # [ 0.258296] Freeing SMP alternatives memory: 44K197buildbot # [ 0.258877] pid_max: default: 32768 minimum: 301198buildbot # [ 0.259464] LSM: initializing lsm=capability,landlock,yama,bpf,ima199buildbot # [ 0.260476] landlock: Up and running.200buildbot # [ 0.261371] Yama: becoming mindful.201buildbot # [ 0.262151] LSM support for eBPF active202buildbot # [ 0.262922] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)203buildbot # [ 0.264246] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)204buildbot # [ 0.266735] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)205buildbot # [ 0.267976] Performance Events: Fam17h+ core perfctr, AMD PMU driver.206buildbot # [ 0.268379] ... version: 2207buildbot # [ 0.269078] ... bit width: 48208buildbot # [ 0.269372] ... generic counters: 6209buildbot # [ 0.270058] ... generic bitmap: 000000000000003f210buildbot # [ 0.270373] ... fixed-purpose counters: 0211buildbot # [ 0.271050] ... fixed-purpose bitmap: 0000000000000000212buildbot # [ 0.271372] ... value mask: 0000ffffffffffff213buildbot # [ 0.272236] ... max period: 00007fffffffffff214buildbot # [ 0.273009] ... global_ctrl mask: 000000000000003f215buildbot # [ 0.273482] signal: max sigframe size: 3376216buildbot # [ 0.274343] rcu: Hierarchical SRCU implementation.217buildbot # [ 0.274961] rcu: Max phase no-delay instances is 400.218buildbot # [ 0.279991] smp: Bringing up secondary CPUs ...219buildbot # [ 0.280387] smp: Brought up 1 node, 1 CPU220buildbot # [ 0.281032] smpboot: Total of 1 processors activated (4800.01 BogoMIPS)221buildbot # [ 0.281517] Memory: 940920K/1048024K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 99724K reserved, 0K cma-reserved)222buildbot # [ 0.282622] devtmpfs: initialized223buildbot # [ 0.283489] x86/mm: Memory block size: 128MB224buildbot # [ 0.285192] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)225buildbot # [ 0.286248] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).226buildbot # [ 0.287453] pinctrl core: initialized pinctrl subsystem227buildbot # [ 0.288771] PM: RTC time: 03:06:06, date: 2026-08-23228buildbot # [ 0.292542] NET: Registered PF_NETLINK/PF_ROUTE protocol family229buildbot # [ 0.293755] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations230buildbot # [ 0.294390] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations231buildbot # [ 0.295534] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations232buildbot # [ 0.296382] audit: initializing netlink subsys (disabled)233buildbot # [ 0.297519] thermal_sys: Registered thermal governor 'fair_share'234buildbot # [ 0.297522] thermal_sys: Registered thermal governor 'bang_bang'235buildbot # [ 0.298373] thermal_sys: Registered thermal governor 'step_wise'236buildbot # [ 0.299283] thermal_sys: Registered thermal governor 'user_space'237buildbot # [ 0.300081] audit: type=2000 audit(1787454366.868:1): state=initialized audit_enabled=0 res=1238buildbot # [ 0.301375] thermal_sys: Registered thermal governor 'power_allocator'239buildbot # [ 0.301389] cpuidle: using governor menu240buildbot # [ 0.303565] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5241buildbot # [ 0.304608] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]242buildbot # [ 0.305376] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry243buildbot # [ 0.306384] PCI: Using configuration type 1 for base access244buildbot # [ 0.307463] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.245buildbot # [ 0.312637] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages246buildbot # [ 0.313374] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page247buildbot # [ 0.314315] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages248buildbot # [ 0.319373] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page249buildbot # [ 0.325234] ACPI: Added _OSI(Module Device)250buildbot # [ 0.325870] ACPI: Added _OSI(Processor Device)251buildbot # [ 0.326373] ACPI: Added _OSI(Processor Aggregator Device)252buildbot # [ 0.339443] ACPI: 1 ACPI AML tables successfully acquired and loaded253buildbot # [ 0.343773] ACPI: Interpreter enabled254buildbot # [ 0.344382] ACPI: PM: (supports S0 S3 S4 S5)255buildbot # [ 0.345085] ACPI: Using IOAPIC for interrupt routing256buildbot # [ 0.345426] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug257buildbot # [ 0.346373] PCI: Using E820 reservations for host bridge windows258buildbot # [ 0.349439] ACPI: Enabled 2 GPEs in block 00 to 3F259buildbot # [ 0.358008] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])260buildbot # [ 0.358379] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]261buildbot # [ 0.360578] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]262buildbot # [ 0.361495] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]263buildbot # [ 0.362750] PCI host bridge to bus 0000:00264buildbot # [ 0.363383] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]265buildbot # [ 0.364373] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]266buildbot # [ 0.365372] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]267buildbot # [ 0.366372] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]268buildbot # [ 0.367372] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]269buildbot # [ 0.368377] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]270buildbot # [ 0.369401] pci_bus 0000:00: root bus resource [bus 00-ff]271buildbot # [ 0.370341] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint272buildbot # [ 0.371765] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint273buildbot # [ 0.374452] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]274buildbot # [ 0.375385] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]275buildbot # [ 0.376314] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]276buildbot # [ 0.377550] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]277buildbot # [ 0.379131] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint278buildbot # [ 0.382401] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f]279buildbot # [ 0.383213] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]280buildbot # [ 0.384098] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]281buildbot # [ 0.384379] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]282buildbot # [ 0.385935] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint283buildbot # [ 0.387404] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f]284buildbot # [ 0.388205] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]285buildbot # [ 0.389112] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]286buildbot # [ 0.389912] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint287buildbot # [ 0.392401] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf]288buildbot # [ 0.393191] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]289buildbot # [ 0.394063] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]290buildbot # [ 0.394910] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint291buildbot # [ 0.396402] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f]292buildbot # [ 0.397228] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]293buildbot # [ 0.398072] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]294buildbot # [ 0.399751] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint295buildbot # [ 0.401380] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf]296buildbot # [ 0.402258] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]297buildbot # [ 0.403123] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]298buildbot # [ 0.403916] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint299buildbot # [ 0.406765] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f]300buildbot # [ 0.407950] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]301buildbot # [ 0.408393] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]302buildbot # [ 0.409986] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint303buildbot # [ 0.411402] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df]304buildbot # [ 0.412214] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]305buildbot # [ 0.413063] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]306buildbot # [ 0.413379] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref]307buildbot # [ 0.415579] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint308buildbot # [ 0.417385] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]309buildbot # [ 0.418321] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]310buildbot # [ 0.419751] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint311buildbot # [ 0.421409] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff]312buildbot # [ 0.422200] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]313buildbot # [ 0.423039] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]314buildbot # [ 0.423910] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint315buildbot # [ 0.425379] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff]316buildbot # [ 0.426192] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]317buildbot # [ 0.427094] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]318buildbot # [ 0.427926] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint319buildbot # [ 0.429086] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f]320buildbot # [ 0.429594] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint321buildbot # [ 0.431037] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f]322buildbot # [ 0.431602] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint323buildbot # [ 0.433960] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f]324buildbot # [ 0.434603] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint325buildbot # [ 0.435938] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]326buildbot # [ 0.436604] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint327buildbot # [ 0.437655] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO328buildbot # [ 0.438616] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint329buildbot # [ 0.440400] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f]330buildbot # [ 0.441235] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]331buildbot # [ 0.442394] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint332buildbot # [ 0.444034] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]333buildbot # [ 0.447821] ACPI: PCI: Interrupt link LNKA configured for IRQ 10334buildbot # [ 0.448479] ACPI: PCI: Interrupt link LNKB configured for IRQ 10335buildbot # [ 0.449478] ACPI: PCI: Interrupt link LNKC configured for IRQ 11336buildbot # [ 0.450474] ACPI: PCI: Interrupt link LNKD configured for IRQ 11337buildbot # [ 0.451494] ACPI: PCI: Interrupt link LNKE configured for IRQ 10338buildbot # [ 0.452492] ACPI: PCI: Interrupt link LNKF configured for IRQ 10339buildbot # [ 0.453479] ACPI: PCI: Interrupt link LNKG configured for IRQ 11340buildbot # [ 0.454479] ACPI: PCI: Interrupt link LNKH configured for IRQ 11341buildbot # [ 0.455410] ACPI: PCI: Interrupt link GSIA configured for IRQ 16342buildbot # [ 0.456390] ACPI: PCI: Interrupt link GSIB configured for IRQ 17343buildbot # [ 0.457342] ACPI: PCI: Interrupt link GSIC configured for IRQ 18344buildbot # [ 0.458100] ACPI: PCI: Interrupt link GSID configured for IRQ 19345buildbot # [ 0.458386] ACPI: PCI: Interrupt link GSIE configured for IRQ 20346buildbot # [ 0.459319] ACPI: PCI: Interrupt link GSIF configured for IRQ 21347buildbot # [ 0.460094] ACPI: PCI: Interrupt link GSIG configured for IRQ 22348buildbot # [ 0.460392] ACPI: PCI: Interrupt link GSIH configured for IRQ 23349buildbot # [ 0.462534] iommu: Default domain type: Translated350buildbot # [ 0.463258] iommu: DMA domain TLB invalidation policy: lazy mode351buildbot # [ 0.464381] ACPI: bus type USB registered352buildbot # [ 0.465073] usbcore: registered new interface driver usbfs353buildbot # [ 0.465393] usbcore: registered new interface driver hub354buildbot # [ 0.466194] usbcore: registered new device driver usb355buildbot # [ 0.467849] NetLabel: Initializing356buildbot # [ 0.468373] NetLabel: domain hash size = 128357buildbot # [ 0.469049] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO358buildbot # [ 0.469416] NetLabel: unlabeled traffic allowed by default359buildbot # [ 0.470336] PCI: Using ACPI for IRQ routing360buildbot # [ 0.513689] pci 0000:00:01.0: vgaarb: setting as boot VGA device361buildbot # [ 0.514369] pci 0000:00:01.0: vgaarb: bridge control possible362buildbot # [ 0.514369] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none363buildbot # [ 0.514378] vgaarb: loaded364buildbot # [ 0.515088] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0365buildbot # [ 0.515374] hpet0: 3 comparators, 64-bit 100.000000 MHz counter366buildbot # [ 0.519464] clocksource: Switched to clocksource kvm-clock367buildbot # [ 0.523391] VFS: Disk quotas dquot_6.6.0368buildbot # [ 0.524097] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)369buildbot # [ 0.525406] pnp: PnP ACPI init370buildbot # [ 0.526229] ACPI: IRQ 4 override to edge(!), high(!)371buildbot # [ 0.527200] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved372buildbot # [ 0.528664] pnp: PnP ACPI: found 6 devices373buildbot # [ 0.536219] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns374buildbot # [ 0.537646] clocksource: Switched to clocksource acpi_pm375buildbot # [ 0.538615] NET: Registered PF_INET protocol family376buildbot # [ 0.539588] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)377buildbot # [ 0.556755] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)378buildbot # [ 0.558242] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)379buildbot # [ 0.559501] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)380buildbot # [ 0.560760] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)381buildbot # [ 0.561952] TCP: Hash tables configured (established 8192 bind 8192)382buildbot # [ 0.562996] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)383buildbot # [ 0.564200] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)384buildbot # [ 0.565272] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)385buildbot # [ 0.566467] NET: Registered PF_UNIX/PF_LOCAL protocol family386buildbot # [ 0.567412] NET: Registered PF_XDP protocol family387buildbot # [ 0.568213] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]388buildbot # [ 0.569198] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]389buildbot # [ 0.570158] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]390buildbot # [ 0.571213] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]391buildbot # [ 0.572270] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]392buildbot # [ 0.573330] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]393buildbot # [ 0.575031] ACPI: \_SB_.GSIA: Enabled at IRQ 16394buildbot # [ 0.577269] ACPI: \_SB_.GSIB: Enabled at IRQ 17395buildbot # [ 0.579793] ACPI: \_SB_.GSIC: Enabled at IRQ 18396buildbot # [ 0.581813] ACPI: \_SB_.GSID: Enabled at IRQ 19397buildbot # [ 0.583603] PCI: CLS 0 bytes, default 64398buildbot # [ 0.584531] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns399buildbot # [ 0.586263] Trying to unpack rootfs image as initramfs...400buildbot # [ 0.629698] Initialise system trusted keyrings401buildbot # [ 0.630583] workingset: timestamp_bits=40 max_order=18 bucket_order=0402buildbot # [ 0.653973] Key type asymmetric registered403buildbot # [ 0.654643] Asymmetric key parser 'x509' registered404buildbot # [ 0.655485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)405buildbot # [ 0.662010] io scheduler mq-deadline registered406buildbot # [ 0.662752] io scheduler kyber registered407buildbot # [ 0.666455] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled408buildbot # [ 0.667665] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A409buildbot # [ 0.672099] Linux agpgart interface v0.103410buildbot # [ 0.672843] ACPI: bus type drm_connector registered411buildbot # [ 0.676172] usbcore: registered new interface driver usbserial_generic412buildbot # [ 0.677180] usbserial: USB Serial support registered for generic413buildbot # [ 0.679873] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.414buildbot # [ 0.679873] Please enable it if your BIOS has the CPPC option.415buildbot # [ 0.682110] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled416buildbot # [ 0.685049] drop_monitor: Initializing network drop monitor service417buildbot # [ 0.686163] NET: Registered PF_INET6 protocol family418buildbot # [ 0.691350] Segment Routing with IPv6419buildbot # [ 0.692040] In-situ OAM (IOAM) with IPv6420buildbot # [ 0.695137] IPI shorthand broadcast: enabled421buildbot # [ 0.703499] sched_clock: Marking stable (568014501, 134843568)->(776543342, -73685273)422buildbot # [ 0.707082] registered taskstats version 1423buildbot # [ 0.708025] Loading compiled-in X.509 certificates424buildbot # [ 0.725872] Demotion targets for Node 0: null425buildbot # [ 0.727915] Key type .fscrypt registered426buildbot # [ 0.728538] Key type fscrypt-provisioning registered427buildbot # [ 0.729445] ima: No TPM chip found, activating TPM-bypass!428buildbot # [ 0.733880] ima: Allocated hash algorithm: sha1429buildbot # [ 0.734644] ima: No architecture policies found430buildbot # [ 0.735554] PM: Magic number: 6:122:109431buildbot # [ 0.739195] RAS: Correctable Errors collector initialized.432buildbot # [ 0.747749] clk: Disabling unused clocks433buildbot # [ 0.749877] PM: genpd: Disabling unused power domains434buildbot # [ 0.923668] Freeing initrd memory: 29200K435buildbot # [ 0.926947] Freeing unused decrypted memory: 2028K436buildbot # [ 0.929649] Freeing unused kernel image (initmem) memory: 3644K437buildbot # [ 0.930711] Write protecting the kernel read-only data: 32768k438buildbot # [ 0.932598] Freeing unused kernel image (text/rodata gap) memory: 1216K439buildbot # [ 0.934078] Freeing unused kernel image (rodata/data gap) memory: 756K440buildbot # [ 0.985353] x86/mm: Checked W+X mappings: passed, no W+X pages found.441buildbot # [ 0.986359] Run /init as init process442buildbot # [ 0.997351] systemd[1]: Inserted module 'autofs4'443buildbot # [ 1.013677] fuse: init (API version 7.45)444buildbot # [ 1.019446] ACPI: \_SB_.GSIG: Enabled at IRQ 22445buildbot # [ 1.021784] ACPI: \_SB_.GSIH: Enabled at IRQ 23446buildbot # [ 1.024903] ACPI: \_SB_.GSIE: Enabled at IRQ 20447buildbot # [ 1.027088] ACPI: \_SB_.GSIF: Enabled at IRQ 21448buildbot # [ 1.054965] systemd[1]: Successfully made /usr/ read-only.449buildbot # [ 1.391585] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)450buildbot # [ 1.403129] systemd[1]: Detected virtualization kvm.451buildbot # [ 1.405172] systemd[1]: Detected architecture x86-64.452buildbot # [ 1.407160] systemd[1]: Running in initrd.453buildbot # [ 1.409632] systemd[1]: Initializing machine ID from random generator.454buildbot # [ 1.412447] systemd[1]: Hostname set to <buildbot>.455buildbot # [ 1.632991] systemd[1]: bpf-restrict-fs: LSM BPF program attached456buildbot # [ 1.687661] systemd[1]: Queued start job for default target Initrd Default Target.457buildbot # [ 1.692194] systemd[1]: Created slice Slice /system/modprobe.458buildbot # [ 1.693312] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.459buildbot # [ 1.694652] systemd[1]: Expecting device /dev/disk/by-label/nixos...460buildbot # [ 1.695797] systemd[1]: Reached target Path Units.461buildbot # [ 1.696709] systemd[1]: Reached target Slice Units.462buildbot # [ 1.697526] systemd[1]: Reached target Swaps.463buildbot # [ 1.698318] systemd[1]: Reached target Timer Units.464buildbot # [ 1.699308] systemd[1]: Listening on D-Bus System Message Bus Socket.465buildbot # [ 1.700477] systemd[1]: Listening on Journal Socket (/dev/log).466buildbot # [ 1.701581] systemd[1]: Listening on Journal Sockets.467buildbot # [ 1.702537] systemd[1]: Listening on udev Control Socket.468buildbot # [ 1.703540] systemd[1]: Listening on udev Kernel Socket.469buildbot # [ 1.704472] systemd[1]: Reached target Socket Units.470buildbot # [ 1.706269] systemd[1]: Starting Create List of Static Device Nodes...471buildbot # [ 1.709933] systemd[1]: Starting Load Kernel Module 9pnet_virtio...472buildbot # [ 1.718075] systemd[1]: Starting Load Kernel Module configfs...473buildbot # [ 1.732933] systemd[1]: Starting Journal Service...474buildbot # [ 1.741952] systemd[1]: Starting Load Kernel Modules...475buildbot # [ 1.750899] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os476buildbot # [ 1.769486] netfs: FS-Cache loaded477buildbot # [ 1.774712] 9pnet: Installing 9P2000 support478buildbot # [ 1.788934] systemd[1]: Starting Coldplug All udev Devices...479buildbot # [ 1.800462] systemd-journald[67]: Collecting audit messages is disabled.480buildbot # [ 1.803619] systemd[1]: Finished Create List of Static Device Nodes.481buildbot # [ 1.810098] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.482buildbot # [ 1.817256] systemd[1]: Finished Load Kernel Module 9pnet_virtio.483buildbot # [ 1.824267] systemd[1]: modprobe@configfs.service: Deactivated successfully.484buildbot # [ 1.828242] systemd[1]: Finished Load Kernel Module configfs.485buildbot # [ 1.834425] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config486buildbot # [ 1.839046] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.487buildbot # [ 1.845944] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...488buildbot # [ 1.848881] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev489buildbot # [ 1.879027] systemd[1]: Finished Load Kernel Modules.490buildbot # [ 1.887071] systemd[1]: Starting Apply Kernel Variables...491buildbot # [ 1.898950] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.492buildbot # [ 1.908090] systemd[1]: Starting Create Static Device Nodes in /dev...493buildbot # [ 1.784296] systemd-modules-load[68]: Inserted module 'dm_mod'[ 1.921229] systemd[1]: Started Journal Service.494buildbot # 495buildbot # [ 1.787297] systemd-modules-load[68]: Inserted module 'virtio_balloon'496buildbot # [ 1.790332] systemd-modules-load[68]: Inserted module 'virtio_gpu'497buildbot # [ 1.800097] systemd[1]: Finished Apply Kernel Variables.498buildbot # [ 1.813118] systemd[1]: Finished Create Static Device Nodes in /dev.499buildbot # [ 1.814025] systemd[1]: Reached target Preparation for Local File Systems.500buildbot # [ 1.814878] systemd[1]: Reached target Local File Systems.501buildbot # [ 1.818068] systemd[1]: Starting Create System Files and Directories...502buildbot # [ 1.825133] systemd[1]: Starting Rule-based Manager for Device Events and Files...503buildbot # [ 1.848283] systemd[1]: Finished Create System Files and Directories.504buildbot # [ 1.872368] systemd-udevd[83]: Using default interface naming scheme 'v261'.505buildbot # [ 1.896342] systemd[1]: Started Rule-based Manager for Device Events and Files.506buildbot # [ 1.948691] systemd[1]: Finished Coldplug All udev Devices.507buildbot # [ 1.949577] systemd[1]: Reached target System Initialization.508buildbot # [ 1.950356] systemd[1]: Reached target Basic System.509buildbot # [ 2.264733] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12510buildbot # [ 2.272332] virtio_blk virtio5: 1/0/0 default/read/poll queues511buildbot # [ 2.290751] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)512buildbot # [ 2.297081] serio: i8042 KBD port at 0x60,0x64 irq 1513buildbot # [ 2.297732] serio: i8042 AUX port at 0x60,0x64 irq 12514buildbot # [ 2.314808] ehci-pci 0000:00:1d.7: EHCI Host Controller515buildbot # [ 2.315648] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1516buildbot # [ 2.317399] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000517buildbot # [ 2.324887] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00518buildbot # [ 2.326105] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18519buildbot # [ 2.327562] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1520buildbot # [ 2.328871] usb usb1: Product: EHCI Host Controller521buildbot # [ 2.329475] usb usb1: Manufacturer: Linux 6.18.45 ehci_hcd522buildbot # [ 2.331867] usb usb1: SerialNumber: 0000:00:1d.7523buildbot # [ 2.333450] hub 1-0:1.0: USB hub found524buildbot # [ 2.334560] hub 1-0:1.0: 6 ports detected525buildbot # [ 2.340526] uhci_hcd 0000:00:1d.0: UHCI Host Controller526buildbot # [ 2.341313] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2527buildbot # [ 2.350957] uhci_hcd 0000:00:1d.0: detected 2 ports528buildbot # [ 2.351719] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200529buildbot # [ 2.362500] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18530buildbot # [ 2.363750] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1531buildbot # [ 2.370782] usb usb2: Product: UHCI Host Controller532buildbot # [ 2.374906] usb usb2: Manufacturer: Linux 6.18.45 uhci_hcd533buildbot # [ 2.375599] usb usb2: SerialNumber: 0000:00:1d.0534buildbot # [ 2.378559] SCSI subsystem initialized535buildbot # [ 2.386459] hub 2-0:1.0: USB hub found536buildbot # [ 2.390789] hub 2-0:1.0: 2 ports detected537buildbot # [ 2.402988] uhci_hcd 0000:00:1d.1: UHCI Host Controller538buildbot # [ 2.403823] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3539buildbot # [ 2.271332] systemd[1]: Starting Virtual Console Setup...540buildbot # [ 2.410472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0541buildbot # [ 2.280627] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line.542buildbot # [ 2.302436] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones.543buildbot # [ 2.305172] systemd[1]: Finished Virtual Console Setup.544buildbot # [ 2.310297] (udev-worker)[87]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.545buildbot # [ 2.312140] (udev-worker)[87]: Network interface NamePolicy= disabled on kernel command line.546buildbot # [ 2.449907] uhci_hcd 0000:00:1d.1: detected 2 ports547buildbot # [ 2.450644] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220548buildbot # [ 2.462237] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18549buildbot # [ 2.463295] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1550buildbot # [ 2.474037] usb usb3: Product: UHCI Host Controller551buildbot # [ 2.474832] usb usb3: Manufacturer: Linux 6.18.45 uhci_hcd552buildbot # [ 2.475523] usb usb3: SerialNumber: 0000:00:1d.1553buildbot # [ 2.347645] systemd[1]: Found device /dev/disk/by-label/nixos.554buildbot # [ 2.483598] hub 3-0:1.0: USB hub found555buildbot # [ 2.350328] systemd[1]: Reached target Initrd Root Device.556buildbot # [ 2.486119] hub 3-0:1.0: 2 ports detected557buildbot # [ 2.354429] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...558buildbot # [ 2.495394] uhci_hcd 0000:00:1d.2: UHCI Host Controller559buildbot # [ 2.496281] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4560buildbot # [ 2.503523] uhci_hcd 0000:00:1d.2: detected 2 ports561buildbot # [ 2.505074] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240562buildbot # [ 2.508760] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18563buildbot # [ 2.510887] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1564buildbot # [ 2.517053] usb usb4: Product: UHCI Host Controller565buildbot # [ 2.517695] usb usb4: Manufacturer: Linux 6.18.45 uhci_hcd566buildbot # [ 2.520960] usb usb4: SerialNumber: 0000:00:1d.2567buildbot # [ 2.388610] systemd-fsck[107]: nixos: clean, 12/65536 files, 13019/262144 blocks568buildbot # [ 2.524991] hub 4-0:1.0: USB hub found569buildbot # [ 2.394245] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.570buildbot # [ 2.530584] hub 4-0:1.0: 2 ports detected571buildbot # [ 2.542196] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode572buildbot # [ 2.543259] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)573buildbot # [ 2.554134] ahci 0000:00:1f.2: flags: 64bit ncq only574buildbot # [ 2.565800] scsi host0: ahci575buildbot # [ 2.568009] scsi host1: ahci576buildbot # [ 2.571102] scsi host2: ahci577buildbot # [ 2.573914] scsi host3: ahci578buildbot # [ 2.575982] scsi host4: ahci579buildbot # [ 2.576876] usb 1-1: new high-speed USB device number 2 using ehci-pci580buildbot # [ 2.578956] scsi host5: ahci581buildbot # [ 2.579471] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1582buildbot # [ 2.583298] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1583buildbot # [ 2.585031] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1584buildbot # [ 2.586229] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1585buildbot # [ 2.587309] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1586buildbot # [ 2.588362] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1587buildbot # [ 2.706209] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00588buildbot # [ 2.708970] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10589buildbot # [ 2.711933] usb 1-1: Product: QEMU USB Tablet590buildbot # [ 2.713625] usb 1-1: Manufacturer: QEMU591buildbot # [ 2.715207] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1592buildbot # [ 2.744379] hid: raw HID events driver (C) Jiri Kosina593buildbot # [ 2.664748] systemd[1]: Mounting /sysroot...594buildbot # [ 2.896623] ata4: SATA link down (SStatus 0 SControl 300)595buildbot # [ 2.898716] ata2: SATA link down (SStatus 0 SControl 300)596buildbot # [ 2.901160] ata1: SATA link down (SStatus 0 SControl 300)597buildbot # [ 2.903351] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)598buildbot # [ 2.905615] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100599buildbot # [ 2.907708] ata3.00: applying bridge limits600buildbot # [ 2.909495] ata5: SATA link down (SStatus 0 SControl 300)601buildbot # [ 2.911632] ata6: SATA link down (SStatus 0 SControl 300)602buildbot # [ 2.913749] ata3.00: configured for UDMA/100603buildbot # [ 2.916099] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5604buildbot # [ 2.985107] usbcore: registered new interface driver usbhid605buildbot # [ 2.989176] usbhid: USB HID core driver606buildbot # [ 3.008235] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2607buildbot # [ 3.012050] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0608buildbot # [ 3.017958] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray609buildbot # [ 3.028986] cdrom: Uniform CD-ROM driver Revision: 3.20610buildbot # [ 3.031200] EXT4-fs (vda): mounted filesystem 70937099-3064-4e19-ba7a-6fd8e4d000d5 r/w with ordered data mode. Quota mode: none.611buildbot # [ 2.900826] systemd[1]: Mounted /sysroot.612buildbot # [ 2.903071] systemd[1]: Reached target Initrd Root File System.613buildbot # [ 2.906723] systemd[1]: Starting Mountpoints Configured in the Real Root...614buildbot # [ 2.920687] systemd-sysroot-fstab-check[139]: /sysroot should be mounted in the initrd, will request daemon-reload.615buildbot # [ 2.923886] systemd[1]: Reload requested from client PID 139 ('systemd-sysroot') (unit initrd-parse-etc.service)...616buildbot # [ 2.927060] systemd[1]: Reloading...617buildbot # [ 3.008964] systemd[1]: Reloading finished in 83 ms.618buildbot # [ 3.017111] systemd-sysroot-fstab-check[139]: Requesting initrd-fs.target/start/replace...619buildbot # [ 3.021222] systemd-sysroot-fstab-check[139]: Requesting swap.target/start/replace...620buildbot # [ 3.024034] systemd[1]: initrd-parse-etc.service: Deactivated successfully.621buildbot # [ 3.025296] systemd[1]: Finished Mountpoints Configured in the Real Root.622buildbot # [ 3.026257] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.623buildbot # [ 3.028865] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio624buildbot # [ 3.666288] systemd[1]: Mounting /sysroot/nix/.ro-store...625buildbot # [ 3.673172] systemd[1]: Mounting /sysroot/nix/.rw-store...626buildbot # [ 3.682156] systemd[1]: Mounting /sysroot/run...627buildbot # [ 3.691329] systemd[1]: Mounting /sysroot/tmp/shared...628buildbot # [ 3.702618] systemd[1]: Mounting /sysroot/tmp/xchg...629buildbot # [ 3.740273] systemd[1]: Mounted /sysroot/run.630buildbot # [ 3.882345] 9p: Installing v9fs 9p2000 file system support631buildbot # [ 3.750269] systemd[1]: Mounted /sysroot/nix/.rw-store.632buildbot # [ 3.757353] systemd[1]: Starting rw-sysroot-nix-store.service...633buildbot # [ 3.760505] systemd[1]: Mounted /sysroot/nix/.ro-store.634buildbot # [ 3.762690] systemd[1]: Mounted /sysroot/tmp/shared.635buildbot # [ 3.764341] systemd[1]: Mounted /sysroot/tmp/xchg.636buildbot # [ 3.774696] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.637buildbot # [ 3.776101] systemd[1]: Finished rw-sysroot-nix-store.service.638buildbot # [ 3.778192] systemd[1]: Mounting /sysroot/nix/store...639buildbot # [ 3.798175] systemd[1]: Mounted /sysroot/nix/store.640buildbot # [ 3.799217] systemd[1]: Reached target Initrd File Systems.641buildbot # [ 3.801070] systemd[1]: Starting Find NixOS closure...642buildbot # [ 3.803433] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...643buildbot # [ 3.819902] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.644buildbot # [ 3.827192] systemd[1]: Finished Find NixOS closure.645buildbot # [ 3.828400] systemd[1]: Reached target Initrd Default Target.646buildbot # [ 3.830451] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...647buildbot # [ 3.843139] systemd[1]: Stopped target Initrd Default Target.648buildbot # [ 3.844074] systemd[1]: Stopped target Basic System.649buildbot # [ 3.844925] systemd[1]: Stopped target Initrd Root Device.650buildbot # [ 3.845711] systemd[1]: Stopped target Path Units.651buildbot # [ 3.847050] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.652buildbot # [ 3.847960] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.653buildbot # [ 3.848958] systemd[1]: Stopped target Slice Units.654buildbot # [ 3.849598] systemd[1]: Stopped target Socket Units.655buildbot # [ 3.850663] systemd[1]: Stopped target System Initialization.656buildbot # [ 3.851599] systemd[1]: Stopped target Swaps.657buildbot # [ 3.853140] systemd[1]: Stopped target Timer Units.658buildbot # [ 3.853753] systemd[1]: dbus.socket: Deactivated successfully.659buildbot # [ 3.854596] systemd[1]: Closed D-Bus System Message Bus Socket.660buildbot # [ 3.855413] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.661buildbot # [ 3.856317] systemd[1]: Stopped Find NixOS closure.662buildbot # [ 3.857164] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio663buildbot # [ 3.859176] systemd[1]: Starting rw-sysroot-nix-store.service...664buildbot # [ 3.860087] systemd[1]: systemd-sysctl.service: Deactivated successfully.665buildbot # [ 3.861190] systemd[1]: Stopped Apply Kernel Variables.666buildbot # [ 3.862275] systemd[1]: systemd-modules-load.service: Deactivated successfully.667buildbot # [ 3.864164] systemd[1]: Stopped Load Kernel Modules.668buildbot # [ 3.865094] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.669buildbot # [ 3.866407] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.670buildbot # [ 3.867515] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.671buildbot # [ 3.868651] systemd[1]: Stopped Create System Files and Directories.672buildbot # [ 3.870119] systemd[1]: Stopped target Local File Systems.673buildbot # [ 3.870971] systemd[1]: Stopped target Preparation for Local File Systems.674buildbot # [ 3.871896] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.675buildbot # [ 3.873099] systemd[1]: Stopped Coldplug All udev Devices.676buildbot # [ 3.873826] systemd[1]: Stopping Rule-based Manager for Device Events and Files...677buildbot # [ 3.875337] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.678buildbot # [ 3.877119] systemd[1]: Stopped Virtual Console Setup.679buildbot # [ 3.884194] systemd[1]: initrd-cleanup.service: Deactivated successfully.680buildbot # [ 3.889993] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.681buildbot # [ 3.893221] systemd[1]: systemd-udevd.service: Deactivated successfully.682buildbot # [ 3.895152] systemd[1]: Stopped Rule-based Manager for Device Events and Files.683buildbot # [ 3.896651] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.684buildbot # [ 3.898659] systemd[1]: Closed udev Control Socket.685buildbot # [ 3.901233] systemd[1]: Starting Cleanup udev Database...686buildbot # [ 3.901944] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.687buildbot # [ 3.902875] systemd[1]: Stopped Create Static Device Nodes in /dev.688buildbot # [ 3.903642] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.689buildbot # [ 3.905129] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.690buildbot # [ 3.906032] systemd[1]: kmod-static-nodes.service: Deactivated successfully.691buildbot # [ 3.906856] systemd[1]: Stopped Create List of Static Device Nodes.692buildbot # [ 3.908096] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.693buildbot # [ 3.909294] systemd[1]: Finished rw-sysroot-nix-store.service.694buildbot # [ 3.925310] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.695buildbot # [ 3.926460] systemd[1]: Finished Cleanup udev Database.696buildbot # [ 3.928122] systemd[1]: Reached target Switch Root.697buildbot # [ 3.929126] systemd[1]: Starting NixOS Activation...698buildbot # [ 4.074457] initrd-nixos-activation-start[192]: booting system configuration /nix/store/4i8hxlg7y03hljs5wsb0a0z3xk3awds6-nixos-system-buildbot-test699buildbot # [ 4.134294] initrd-nixos-activation-start[192]: running activation script...700buildbot # [ 4.536428] initrd-nixos-activation-start[215]: setting up /etc...701buildbot # [ 4.785611] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.702buildbot # [ 4.787184] systemd[1]: Finished NixOS Activation.703buildbot # [ 4.789130] systemd[1]: Starting Switch Root...704buildbot # [ 4.802105] systemd[1]: Switching root.705buildbot # [ 5.064637] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).706buildbot # [ 5.235991] NET: Registered PF_VSOCK protocol family707buildbot # [ 5.624523] systemd[1]: systemd 261.1 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)708buildbot # [ 5.633771] systemd[1]: Detected virtualization kvm.709buildbot # [ 5.635497] systemd[1]: Detected architecture x86-64.710buildbot # [ 5.637362] systemd[1]: Detected first boot.711buildbot # [ 5.645638] systemd[1]: Initializing machine ID from random generator.712buildbot # [ 5.921956] systemd[1]: bpf-restrict-fs: LSM BPF program attached713buildbot # [ 6.067133] systemd[1]: Applying preset policy.714buildbot # [ 6.522423] systemd[1]: Populated /etc with preset unit settings.715buildbot # [ 6.998286] systemd[1]: initrd-switch-root.service: Deactivated successfully.716buildbot # [ 7.000506] systemd[1]: Stopped initrd-switch-root.service.717buildbot # [ 7.003319] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.718buildbot # [ 7.005205] systemd[1]: Created slice Slice /system/getty.719buildbot # [ 7.006465] systemd[1]: Created slice User and Session Slice.720buildbot # [ 7.007310] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.721buildbot # [ 7.008399] systemd[1]: Started Forward Password Requests to Wall Directory Watch.722buildbot # [ 7.009420] systemd[1]: Expecting device /dev/hvc0...723buildbot # [ 7.010092] systemd[1]: Expecting device /dev/ttyS0...724buildbot # [ 7.010768] systemd[1]: Reached target Local Encrypted Volumes.725buildbot # [ 7.011524] systemd[1]: Stopped target initrd-fs.target.726buildbot # [ 7.012265] systemd[1]: Stopped target initrd-root-fs.target.727buildbot # [ 7.013020] systemd[1]: Stopped target initrd-switch-root.target.728buildbot # [ 7.013800] systemd[1]: Reached target Virtual Machines and Containers.729buildbot # [ 7.014632] systemd[1]: Reached target Path Units.730buildbot # [ 7.015277] systemd[1]: Reached target Remote File Systems.731buildbot # [ 7.016013] systemd[1]: Reached target Slice Units.732buildbot # [ 7.016665] systemd[1]: Reached target Swaps.733buildbot # [ 7.020991] systemd[1]: Listening on Query the User Interactively for a Password.734buildbot # [ 7.036628] systemd[1]: Listening on Process Core Dump Socket.735buildbot # [ 7.039656] systemd[1]: Listening on Credential Encryption/Decryption.736buildbot # [ 7.042710] systemd[1]: Listening on Factory Reset Management.737buildbot # [ 7.043540] systemd[1]: Listening on Hostname Service Socket.738buildbot # [ 7.047606] systemd[1]: Starting Journal Log Access Socket...739buildbot # [ 7.049616] systemd[1]: Listening on Journal Audit Socket.740buildbot # [ 7.052801] systemd[1]: Listening on Console Output Muting Service Socket.741buildbot # [ 7.053966] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.742buildbot # [ 7.056001] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os743buildbot # [ 7.057208] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki744buildbot # [ 7.068272] systemd[1]: Listening on Disk Repartitioning Service Socket.745buildbot # [ 7.069253] systemd[1]: Listening on udev Control Socket.746buildbot # [ 7.070124] systemd[1]: Listening on udev Varlink Socket.747buildbot # [ 7.074795] systemd[1]: Mounting Huge Pages File System...748buildbot # [ 7.077919] systemd[1]: Mounting POSIX Message Queue File System...749buildbot # [ 7.083126] systemd[1]: Mounting Kernel Debug File System...750buildbot # [ 7.089409] systemd[1]: Mounting Kernel Trace File System...751buildbot # [ 7.095811] systemd[1]: Starting Create List of Static Device Nodes...752buildbot # [ 7.096956] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio753buildbot # [ 7.106104] systemd[1]: Starting Load Kernel Module configfs...754buildbot # [ 7.107484] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm755buildbot # [ 7.109524] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore756buildbot # [ 7.111272] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse757buildbot # [ 7.119663] systemd[1]: Mounting FUSE Control File System...758buildbot # [ 7.121694] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67759buildbot # [ 7.148386] systemd[1]: Starting Journal Service...760buildbot # [ 7.171038] systemd[1]: Starting Load Kernel Modules...761buildbot # [ 7.192213] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...762buildbot # [ 7.206696] systemd[1]: Starting Remount Root and Kernel File Systems...763buildbot # [ 7.212313] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os764buildbot # [ 7.223280] systemd[1]: Starting Coldplug All udev Devices...765buildbot # [ 7.235026] systemd-journald[285]: Collecting audit messages is enabled.766buildbot # [ 7.245401] systemd[1]: Listening on Journal Log Access Socket.767buildbot # [ 7.249793] systemd[1]: Mounted Huge Pages File System.768buildbot # [ 7.254629] systemd[1]: Mounted POSIX Message Queue File System.769buildbot # [ 7.262959] systemd[1]: Mounted Kernel Debug File System.770buildbot # [ 7.265130] systemd[1]: Mounted Kernel Trace File System.771buildbot # [ 7.134863] systemd[1]: Queued start job for default target Multi-User System.772buildbot # [ 7.271898] systemd[1]: Started Journal Service.773buildbot # [ 7.140077] systemd[1]: systemd-journald.service: Deactivated successfully.774buildbot # [ 7.145385] systemd[1]: Finished Create List of Static Device Nodes.775buildbot # [ 7.282132] EXT4-fs (vda): re-mounted 70937099-3064-4e19-ba7a-6fd8e4d000d5.776buildbot # [ 7.149407] systemd[1]: modprobe@configfs.service: Deactivated successfully.777buildbot # [ 7.152857] systemd[1]: Finished Load Kernel Module configfs.778buildbot # [ 7.158099] systemd[1]: Mounted FUSE Control File System.779buildbot # [ 7.294165] loop: module loaded780buildbot # [ 7.162658] systemd-modules-load[286]: Inserted module 'loop'781buildbot # [ 7.166100] systemd[1]: Finished Remount Root and Kernel File Systems.782buildbot # [ 7.181136] systemd[1]: Listening on Disk Image Download Service Socket.783buildbot # [ 7.186201] systemd-modules-load[286]: Inserted module 'tls'784buildbot # [ 7.190117] systemd[1]: Mounting Kernel Configuration File System...785buildbot # [ 7.195221] systemd[1]: Starting Flush Journal to Persistent Storage...786buildbot # [ 7.197147] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore787buildbot # [ 7.203983] systemd[1]: Starting Load/Save OS Random Seed...788buildbot # [ 7.215057] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...789buildbot # [ 7.217154] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os790buildbot # [ 7.226350] systemd-oomd[288]: No swap; memory pressure usage will be degraded791buildbot # [ 7.230281] systemd[1]: Finished Load Kernel Modules.792buildbot # [ 7.241935] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.793buildbot # [ 7.254613] systemd[1]: Starting Apply Kernel Variables...794buildbot # [ 7.404632] systemd-journald[285]: Received client request to flush runtime journal.795buildbot # [ 7.378129] systemd[1]: Finished Load/Save OS Random Seed.796buildbot # [ 7.379633] systemd[1]: Mounted Kernel Configuration File System.797buildbot # [ 7.382361] systemd[1]: Reached target First Boot Complete.798buildbot # [ 7.383677] systemd[1]: Finished Apply Kernel Variables.799buildbot # [ 7.384412] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.800buildbot # [ 7.387129] systemd[1]: Finished Flush Journal to Persistent Storage.801buildbot # [ 7.392590] systemd[1]: Starting Create Static Device Nodes in /dev...802buildbot # [ 7.469719] systemd[1]: Finished Create Static Device Nodes in /dev.803buildbot # [ 7.471075] systemd[1]: Reached target Preparation for Local File Systems.804buildbot # [ 7.475896] systemd[1]: Starting Rule-based Manager for Device Events and Files...805buildbot # [ 7.491866] systemd[1]: Finished Coldplug All udev Devices.806buildbot # [ 7.545835] systemd-udevd[316]: Using default interface naming scheme 'v261'.807buildbot # [ 7.643912] systemd[1]: Started Rule-based Manager for Device Events and Files.808buildbot # [ 7.728049] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse809buildbot # [ 7.775079] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.810buildbot # [ 7.784450] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.811buildbot # [ 7.822295] (udev-worker)[324]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.812buildbot # [ 7.826086] (udev-worker)[324]: Network interface NamePolicy= disabled on kernel command line.813buildbot # [ 7.827511] (udev-worker)[321]: Network interface NamePolicy= disabled on kernel command line.814buildbot # [ 7.868305] systemd[1]: Mounting /run/wrappers...815buildbot # [ 7.906334] systemd[1]: Mounted /run/wrappers.816buildbot # [ 7.907414] systemd[1]: Reached target Local File Systems.817buildbot # [ 7.911080] systemd[1]: Listening on Boot Loader Control Service Socket.818buildbot # [ 7.913447] systemd[1]: Starting register-nix-paths.service...819buildbot # [ 7.917882] systemd[1]: Starting Create SUID/SGID Wrappers...820buildbot # [ 7.918767] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.821buildbot # [ 7.926075] systemd[1]: Starting Save Transient machine-id to Disk...822buildbot # [ 7.939483] systemd[1]: Starting Create System Files and Directories...823buildbot # [ 7.962421] systemd[1]: Condition check resulted in Virtio network device being skipped.824buildbot # [ 7.963693] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore825buildbot # [ 7.965661] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.826buildbot # [ 7.966837] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67827buildbot # [ 7.970296] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore828buildbot # [ 7.973119] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os829buildbot # [ 7.975144] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os830buildbot # [ 8.021740] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.831buildbot # [ 8.026648] systemd[1]: Finished Save Transient machine-id to Disk.832buildbot # [ 8.072516] systemd[1]: Finished Create System Files and Directories.833buildbot # [ 8.082308] systemd[1]: Starting Rebuild Journal Catalog...834buildbot # [ 8.088627] systemd[1]: Starting Record System Boot/Shutdown in UTMP...835buildbot # [ 8.247260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3836buildbot # [ 8.276920] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console837buildbot # [ 8.158221] systemd[1]: Finished Record System Boot/Shutdown in UTMP.838buildbot # [ 8.197835] systemd[1]: Finished Rebuild Journal Catalog.839buildbot # [ 8.205340] systemd[1]: Starting Update is Completed...840buildbot # [ 8.252798] systemd[1]: Finished Update is Completed.841buildbot # [ 8.310881] mousedev: PS/2 mouse device common for all mice842buildbot # [ 8.327163] ACPI: button: Power Button [PWRF]843buildbot # [ 8.466468] rtc_cmos 00:04: RTC can wake from S4844buildbot # [ 8.471781] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4845buildbot # [ 8.472143] rtc_cmos 00:04: registered as rtc0846buildbot # [ 8.472209] rtc_cmos 00:04: setting system clock to 2026-08-23T03:06:15 UTC (1787454375)847buildbot # [ 8.472292] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs848buildbot # [ 8.483580] Console: switching to colour dummy device 80x25849buildbot # [ 8.502350] parport_pc 00:02: reported by Plug and Play ACPI850buildbot # [ 8.502430] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]851buildbot # [ 8.564504] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized852buildbot # [ 8.618379] [drm] Found bochs VGA, ID 0xb0c5.853buildbot # [ 8.618381] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.854buildbot # [ 8.622131] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic855buildbot # [ 8.622756] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0856buildbot # [ 8.645452] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt857buildbot # [ 8.646105] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD858buildbot # [ 8.513372] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.859buildbot # [ 8.515624] systemd[1]: Finished Create SUID/SGID Wrappers.860buildbot # [ 8.717624] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6861buildbot # [ 8.717903] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5862buildbot # [ 8.649025] systemd[1]: Starting Virtual Console Setup...863buildbot # [ 8.757999] Console: switching to colour frame buffer device 160x50864buildbot # [ 8.805590] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device865buildbot # [ 8.677069] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.866buildbot # [ 8.679059] systemd[1]: Stopped Virtual Console Setup.867buildbot # [ 8.691994] systemd[1]: Starting Virtual Console Setup...868buildbot # [ 8.935749] ppdev: user-space parallel port driver869buildbot # [ 8.824616] systemd[1]: Finished register-nix-paths.service.870buildbot # [ 8.974496] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)871buildbot # [ 8.843336] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.872buildbot # [ 8.846193] systemd[1]: Stopped Virtual Console Setup.873buildbot # [ 8.852386] systemd[1]: Starting Virtual Console Setup...874buildbot # [ 8.997140] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)875buildbot # [ 9.082886] kvm_amd: TSC scaling supported876buildbot # [ 9.083323] kvm_amd: Nested Virtualization enabled877buildbot # [ 9.083740] kvm_amd: Nested Paging enabled878buildbot # [ 9.084440] kvm_amd: LBR virtualization supported879buildbot # [ 9.085086] kvm_amd: Virtual VMLOAD VMSAVE supported880buildbot # [ 9.085577] kvm_amd: Virtual GIF supported881buildbot # [ 9.086148] kvm_amd: Virtual NMI enabled882buildbot # [ 9.129184] EDAC MC: Ver: 3.0.0883buildbot # [ 9.445724] systemd-vconsole-setup[420]: Configuration of first virtual console was skipped, ignoring remaining ones.884buildbot # [ 9.449260] systemd[1]: Finished Virtual Console Setup.885buildbot # [ 9.450697] systemd[1]: Reached target System Initialization.886buildbot # [ 9.453068] systemd[1]: Started Discard unused filesystem blocks once a week.887buildbot # [ 9.453950] systemd[1]: Started Daily Cleanup of Temporary Directories.888buildbot # [ 9.455402] systemd[1]: Reached target Timer Units.889buildbot # [ 9.456190] systemd[1]: Listening on D-Bus System Message Bus Socket.890buildbot # [ 9.457095] systemd[1]: Listening on Nix Daemon Socket.891buildbot # [ 9.459811] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).892buildbot # [ 9.460881] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.893buildbot # [ 9.461890] systemd[1]: Reached target Socket Units.894buildbot # [ 9.462522] systemd[1]: Reached target Basic System.895buildbot # [ 9.466057] systemd[1]: Started backdoor.service.896buildbot # [ 9.468901] systemd[1]: Starting Import lastlog data into lastlog2 database...897buildbot # [ 9.473058] systemd[1]: Starting Name Service Cache Daemon (nsncd)...898buildbot # [ 9.481923] systemd[1]: Starting Post-Boot Actions...899buildbot # [ 9.490066] systemd[1]: Started Reset console on configuration changes.900buildbot # [ 9.506513] systemd[1]: Starting resolvconf update...901buildbot # [ 9.508612] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.902buildbot # [ 9.536093] systemd[1]: Starting D-Bus System Message Bus...903buildbot # [ 9.565300] systemd[1]: Finished Post-Boot Actions.904buildbot # connecting to host...905buildbot # [ 9.605491] systemd[1]: Started Name Service Cache Daemon (nsncd).906buildbot # [ 9.609288] systemd[1]: Finished Import lastlog data into lastlog2 database.907buildbot # [ 9.610448] nsncd[426]: Aug 23 03:06:16.766 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"908buildbot: Guest shell says: b'Spawning backdoor root shell...\n'909buildbot # [ 9.613471] systemd[1]: Reached target Host and Network Name Lookups.910buildbot: connected to guest root shell911buildbot # [ 9.614713] systemd[1]: Reached target User and Group Name Lookups.912buildbot: (connecting took 10.32 seconds)913buildbot: (finished: waiting for the VM to finish booting, in 10.53 seconds)914buildbot # [ 9.624585] systemd[1]: Starting User Login Management...915buildbot # [ 9.713490] dbus-broker-launch[433]: Looking up NSS user entry for 'systemd-timesync'...916buildbot # [ 9.736116] systemd[1]: Stopped target Host and Network Name Lookups.917buildbot # [ 9.736931] systemd[1]: Stopping Host and Network Name Lookups...918buildbot # [ 9.738395] systemd[1]: Stopped target User and Group Name Lookups.919buildbot # [ 9.741073] systemd[1]: Stopping User and Group Name Lookups...920buildbot # [ 9.742331] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...921buildbot # [ 9.746771] systemd-logind[452]: New seat seat0.922buildbot # [ 9.750707] systemd[1]: nscd.service: Deactivated successfully.923buildbot # [ 9.754166] dbus-broker-launch[433]: NSS returned no entry for 'systemd-timesync'924buildbot # [ 9.755123] dbus-broker-launch[433]: Invalid user-name in /nix/store/ycrlgbzi0ikg4zhnjfd3n6pik31vz0h8-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"925buildbot # [ 9.757911] systemd[1]: Stopped Name Service Cache Daemon (nsncd).926buildbot # [ 9.761473] systemd-logind[452]: Watching system buttons on /dev/input/event2 (Power Button)927buildbot # [ 9.764060] systemd-logind[452]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)928buildbot # [ 9.765635] systemd-logind[452]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)929buildbot # [ 9.772927] systemd[1]: Started User Login Management.930buildbot # [ 9.785243] systemd[1]: Starting linger-users.service...931buildbot # [ 9.790425] systemd[1]: Starting Name Service Cache Daemon (nsncd)...932buildbot # [ 9.796611] systemd[1]: Started D-Bus System Message Bus.933buildbot # [ 9.835481] dbus-broker-launch[433]: Ready934buildbot # [ 9.865934] systemd[1]: Started Name Service Cache Daemon (nsncd).935buildbot # [ 9.867747] nsncd[509]: Aug 23 03:06:17.029 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"936buildbot # [ 9.870354] systemd[1]: Finished resolvconf update.937buildbot # [ 9.873118] systemd[1]: Reached target Preparation for Network.938buildbot # [ 9.874253] systemd[1]: Reached target Host and Network Name Lookups.939buildbot # [ 9.875413] systemd[1]: Reached target User and Group Name Lookups.940buildbot # [ 9.880140] systemd[1]: Starting DHCP Client...941buildbot # [ 9.882655] systemd[1]: Starting Address configuration of eth1...942buildbot # [ 9.888655] systemd[1]: Starting Extra networking commands....943buildbot # [ 9.892512] systemd[1]: linger-users.service: Deactivated successfully.944buildbot # [ 9.895325] systemd[1]: Finished linger-users.service.945buildbot # [ 9.997461] network-addresses-eth1-start[535]: adding address 192.168.1.1/24... done946buildbot # [ 10.013990] network-addresses-eth1-start[535]: adding address 2001:db8:1::1/64... done947buildbot # [ 10.036496] systemd[1]: Finished Address configuration of eth1.948buildbot # [ 10.052207] dhcpcd[543]: dhcpcd-10.3.2 starting949buildbot # [ 10.060757] dhcpcd[597]: dev: loaded udev950buildbot # [ 10.070475] systemd[1]: Finished Extra networking commands..951buildbot # [ 10.072566] systemd[1]: Reached target Network.952buildbot # [ 10.076931] systemd[1]: Starting Nginx Web Server...953buildbot # [ 10.081690] systemd[1]: Starting PostgreSQL Server...954buildbot # [ 10.222345] 8021q: 802.1Q VLAN Support v1.8955buildbot # [ 10.222774] 8021q: adding VLAN 0 to HW filter on device eth1956buildbot # [ 10.092286] systemd[1]: Starting SSH Daemon...957buildbot # [ 10.099320] systemd[1]: Starting Permit User Sessions...958buildbot # [ 10.140903] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.959buildbot # [ 10.165110] systemd[1]: Finished Permit User Sessions.960buildbot # [ 10.177191] systemd[1]: Started Getty on tty1.961buildbot # [ 10.177867] systemd[1]: Reached target Login Prompts.962buildbot # [ 10.222158] sshd[604]: Server listening on 0.0.0.0 port 22.963buildbot # [ 10.222927] systemd[1]: Started SSH Daemon.964buildbot # [ 10.223668] sshd[604]: Server listening on :: port 22.965buildbot # [ 10.231051] systemd[1]: Starting Setup git test repository with scheduled effects...966buildbot # [ 10.414916] cfg80211: Loading compiled-in X.509 certificates for regulatory database967buildbot # [ 10.447330] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'968buildbot # [ 10.448327] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'969buildbot # [ 10.451183] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2970buildbot # [ 10.452060] cfg80211: failed to load regulatory.db971buildbot # [ 10.378642] setup-git-repo-start[623]: hint: Using 'master' as the name for the initial branch. This default branch name972buildbot # [ 10.380323] setup-git-repo-start[623]: hint: will change to "main" in Git 3.0. To configure the initial branch name973buildbot # [ 10.382170] setup-git-repo-start[623]: hint: to use in all of your new repositories, which will suppress this warning,974buildbot # [ 10.383447] setup-git-repo-start[623]: hint: call:975buildbot # [ 10.384536] setup-git-repo-start[623]: hint:976buildbot # [ 10.385936] setup-git-repo-start[623]: hint: git config --global init.defaultBranch <name>977buildbot # [ 10.387100] setup-git-repo-start[623]: hint:978buildbot # [ 10.388342] setup-git-repo-start[623]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and979buildbot # [ 10.390275] setup-git-repo-start[623]: hint: 'development'. The just-created branch can be renamed via this command:980buildbot # [ 10.391520] setup-git-repo-start[623]: hint:981buildbot # [ 10.393069] setup-git-repo-start[623]: hint: git branch -m <name>982buildbot # [ 10.393784] setup-git-repo-start[623]: hint:983buildbot # [ 10.394515] setup-git-repo-start[623]: hint: Disable this message with "git config set advice.defaultBranchName false"984buildbot # [ 10.396327] setup-git-repo-start[623]: Initialized empty Git repository in /srv/repos/test-flake.git/985buildbot # [ 10.535170] 8021q: adding VLAN 0 to HW filter on device eth0986buildbot # [ 10.402614] dhcpcd[597]: eth0: waiting for carrier987buildbot # [ 10.403785] dhcpcd[597]: eth0: carrier acquired988buildbot # [ 10.420732] dhcpcd[597]: DUID 00:01:00:01:32:1d:20:29:52:54:00:12:34:56989buildbot # [ 10.421590] dhcpcd[597]: eth0: IAID 00:12:34:56990buildbot # [ 10.422777] dhcpcd[597]: eth0: adding address fe80::5054:ff:fe12:3456991buildbot # [ 10.446051] postgresql-pre-start[619]: The files belonging to this database system will be owned by user "postgres".992buildbot # [ 10.447562] postgresql-pre-start[619]: This user must also own the server process.993buildbot # [ 10.454791] setup-git-repo-start[637]: hint: Using 'master' as the name for the initial branch. This default branch name994buildbot # [ 10.455960] setup-git-repo-start[637]: hint: will change to "main" in Git 3.0. To configure the initial branch name995buildbot # [ 10.457044] setup-git-repo-start[637]: hint: to use in all of your new repositories, which will suppress this warning,996buildbot # [ 10.458119] setup-git-repo-start[637]: hint: call:997buildbot # [ 10.458646] setup-git-repo-start[637]: hint:998buildbot # [ 10.459176] setup-git-repo-start[637]: hint: git config --global init.defaultBranch <name>999buildbot # [ 10.460202] setup-git-repo-start[637]: hint:1000buildbot # [ 10.460825] setup-git-repo-start[637]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and1001buildbot # [ 10.462163] setup-git-repo-start[637]: hint: 'development'. The just-created branch can be renamed via this command:1002buildbot # [ 10.463415] setup-git-repo-start[637]: hint:1003buildbot # [ 10.464604] setup-git-repo-start[637]: hint: git branch -m <name>1004buildbot # [ 10.465607] setup-git-repo-start[637]: hint:1005buildbot # [ 10.466771] setup-git-repo-start[637]: hint: Disable this message with "git config set advice.defaultBranchName false"1006buildbot # [ 10.468257] setup-git-repo-start[637]: Initialized empty Git repository in /tmp/test-flake/.git/1007buildbot # [ 10.470077] postgresql-pre-start[619]: The database cluster will be initialized with locale "en_US.UTF-8".1008buildbot # [ 10.471124] postgresql-pre-start[619]: The default database encoding has accordingly been set to "UTF8".1009buildbot # [ 10.472119] postgresql-pre-start[619]: The default text search configuration will be set to "english".1010buildbot # [ 10.473094] postgresql-pre-start[619]: Data page checksums are enabled.1011buildbot # [ 10.473839] postgresql-pre-start[619]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok1012buildbot # [ 10.475428] postgresql-pre-start[619]: creating subdirectories ... ok1013buildbot # [ 10.477339] nginx-pre-start[616]: nginx: the configuration file /nix/store/lgfqgn5pr7s80d5pr2pa06h0i5ffxa29-nginx.conf syntax is ok1014buildbot # [ 10.479990] nginx-pre-start[616]: nginx: configuration file /nix/store/lgfqgn5pr7s80d5pr2pa06h0i5ffxa29-nginx.conf test is successful1015buildbot # [ 10.481599] postgresql-pre-start[619]: selecting dynamic shared memory implementation ... posix1016buildbot # [ 10.489347] systemd[1]: Started Nginx Web Server.1017buildbot # [ 10.584337] setup-git-repo-start[648]: [master (root-commit) 1f18872] Initial commit with scheduled effects1018buildbot # [ 10.586258] setup-git-repo-start[648]: 3 files changed, 131 insertions(+)1019buildbot # [ 10.588074] setup-git-repo-start[648]: create mode 100644 effects-lib.nix1020buildbot # [ 10.588856] setup-git-repo-start[648]: create mode 100644 flake.lock1021buildbot # [ 10.590354] setup-git-repo-start[648]: create mode 100644 flake.nix1022buildbot # [ 10.617640] postgresql-pre-start[619]: selecting default "max_connections" ... 1001023buildbot # [ 10.699648] postgresql-pre-start[619]: selecting default "shared_buffers" ... 128MB1024buildbot # [ 10.703417] setup-git-repo-start[653]: To /srv/repos/test-flake.git1025buildbot # [ 10.704967] setup-git-repo-start[653]: * [new branch] master -> master1026buildbot # [ 10.706594] setup-git-repo-start[653]: branch 'master' set up to track 'origin/master'.1027buildbot # [ 10.710442] systemd[1]: Finished Setup git test repository with scheduled effects.1028buildbot: (finished: waiting for unit sshd.service, in 11.80 seconds)1029buildbot: waiting for unit setup-git-repo.service1030buildbot: (finished: waiting for unit setup-git-repo.service, in 0.06 seconds)1031buildbot: waiting for unit multi-user.target1032buildbot # [ 11.242772] dhcpcd[597]: eth0: soliciting a DHCP lease1033buildbot # [ 11.391364] NET: Registered PF_PACKET protocol family1034buildbot # [ 11.260459] dhcpcd[597]: eth0: offered 10.0.2.15 from 10.0.2.21035buildbot # [ 11.263165] dhcpcd[597]: eth0: probing address 10.0.2.15/241036buildbot # [ 11.655700] dhcpcd[597]: eth0: soliciting an IPv6 router1037buildbot # [ 11.656884] dhcpcd[597]: eth0: Router Advertisement from fe80::21038buildbot # [ 11.657834] dhcpcd[597]: eth0: adding address fec0::5054:ff:fe12:3456/641039buildbot # [ 11.658994] dhcpcd[597]: eth0: adding route to fec0::/641040buildbot # [ 11.659932] dhcpcd[597]: eth0: adding default route via fe80::21041buildbot # [ 12.808247] postgresql-pre-start[619]: selecting default time zone ... UTC1042buildbot # [ 12.812927] postgresql-pre-start[619]: creating configuration files ... ok1043buildbot # [ 13.060457] postgresql-pre-start[619]: running bootstrap script ... ok1044buildbot # [ 13.692515] postgresql-pre-start[619]: performing post-bootstrap initialization ... ok1045buildbot # [ 13.841633] postgresql-pre-start[619]: syncing data to disk ... ok1046buildbot # [ 13.842481] postgresql-pre-start[619]: initdb: warning: enabling "trust" authentication for local connections1047buildbot # [ 13.843526] postgresql-pre-start[619]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1048buildbot # [ 13.845167] postgresql-pre-start[619]: Success. You can now start the database server using:1049buildbot # [ 13.846095] postgresql-pre-start[619]: pg_ctl -D /var/lib/postgresql/18 -l logfile start1050buildbot # [ 13.967487] postgres[716]: [716] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1051buildbot # [ 13.980219] postgres[716]: [716] LOG: listening on IPv6 address "::1", port 54321052buildbot # [ 13.981497] postgres[716]: [716] LOG: listening on IPv4 address "127.0.0.1", port 54321053buildbot # [ 13.985160] postgres[716]: [716] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1054buildbot # [ 13.998417] postgres[725]: [725] LOG: database system was shut down at 2026-08-23 03:06:20 GMT1055buildbot # [ 14.004281] postgres[716]: [716] LOG: database system is ready to accept connections1056buildbot # [ 14.010447] systemd[1]: Started PostgreSQL Server.1057buildbot # [ 14.014948] systemd[1]: Starting PostgreSQL Setup Scripts...1058buildbot # [ 14.220336] postgresql-setup-start[736]: CREATE DATABASE1059buildbot # [ 14.280946] postgresql-setup-start[744]: CREATE ROLE1060buildbot # [ 14.309660] postgresql-setup-start[747]: ALTER DATABASE1061buildbot # [ 14.317102] systemd[1]: Finished PostgreSQL Setup Scripts.1062buildbot # [ 14.319767] systemd[1]: Reached target PostgreSQL.1063buildbot # [ 14.324433] systemd[1]: Starting Buildbot Continuous Integration Server....1064buildbot # [ 14.369188] buildbot-master-pre-start[757]: mkdir: created directory '/var/lib/buildbot/master'1065buildbot # [ 16.107449] dhcpcd[597]: eth0: leased 10.0.2.15 for 86400 seconds1066buildbot # [ 16.108980] dhcpcd[597]: eth0: adding route to 10.0.2.0/241067buildbot # [ 16.110104] dhcpcd[597]: eth0: adding default route via 10.0.2.21068buildbot # [ 16.222208] systemd[1]: Started DHCP Client.1069buildbot # [ 20.804448] buildbot-master-pre-start[759]: updating existing installation1070buildbot # [ 20.806158] buildbot-master-pre-start[759]: not touching existing buildbot.tac1071buildbot # [ 20.806964] buildbot-master-pre-start[759]: creating buildbot.tac.new instead1072buildbot # [ 20.807783] buildbot-master-pre-start[759]: creating /var/lib/buildbot/master/master.cfg.sample1073buildbot # [ 20.808938] buildbot-master-pre-start[759]: creating database (postgresql://@/buildbot)1074buildbot # [ 20.809968] buildbot-master-pre-start[759]: buildmaster configured in /var/lib/buildbot/master1075buildbot # [ 21.037921] systemd[1]: Started Buildbot Continuous Integration Server..1076buildbot # [ 21.043519] systemd[1]: Started Buildbot Worker..1077buildbot # [ 21.044654] systemd[1]: Reached target Multi-User System.1078buildbot # [ 21.046098] systemd[1]: Startup finished in 854ms (kernel) + 4.179s (initrd) + 16.011s (userspace) = 21.045s.1079buildbot: (finished: waiting for unit multi-user.target, in 10.96 seconds)1080subtest: Master and worker services start1081buildbot: waiting for unit buildbot-master.service1082buildbot: (finished: waiting for unit buildbot-master.service, in 0.08 seconds)1083buildbot: waiting for unit buildbot-worker.service1084buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds)1085buildbot: waiting for TCP port 8010 on localhost1086buildbot # [ 22.533363] twistd[877]: Starting worker local-worker-0001087buildbot # [ 22.534371] twistd[877]: 2026-08-23T03:06:29+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1088buildbot # [ 22.535805] twistd[877]: 2026-08-23T03:06:29+0000 [-] Loaded.1089buildbot # [ 22.536973] twistd[877]: 2026-08-23T03:06:29+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14 3.14.7) starting up.1090buildbot # [ 22.539118] twistd[877]: 2026-08-23T03:06:29+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1091buildbot # [ 22.540778] twistd[877]: 2026-08-23T03:06:29+0000 [-] Starting Worker -- version: 2026.08.231092buildbot # [ 22.541958] twistd[877]: 2026-08-23T03:06:29+0000 [-] recording hostname in twistd.hostname1093buildbot # [ 22.543096] twistd[877]: 2026-08-23T03:06:29+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x79bfa8dc8050>1094buildbot # [ 22.551969] twistd[877]: 2026-08-23T03:06:29+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x79bfa8dc8590> in 1.6877494302128935 seconds.1095buildbot # [ 22.554281] twistd[877]: 2026-08-23T03:06:29+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x79bfa8dc8050>1096buildbot # [ 24.242307] twistd[877]: 2026-08-23T03:06:31+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x79bfa8dc8050>1097buildbot # [ 24.245845] twistd[877]: 2026-08-23T03:06:31+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x79bfa8dc8590> in 2.367164228389518 seconds.1098buildbot # [ 24.248440] twistd[877]: 2026-08-23T03:06:31+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x79bfa8dc8050>1099buildbot # [ 24.481876] twistd[876]: 2026-08-23T03:06:28+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1100buildbot # [ 24.483235] twistd[876]: 2026-08-23T03:06:31+0000 [-] Loaded.1101buildbot # [ 24.484107] twistd[876]: 2026-08-23T03:06:31+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14 3.14.7) starting up.1102buildbot # [ 24.486452] twistd[876]: 2026-08-23T03:06:31+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1103buildbot # [ 24.488299] twistd[876]: 2026-08-23T03:06:31+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01104buildbot # [ 24.498869] twistd[876]: 2026-08-23T03:06:31+0000 [-] Loading configuration from '/nix/store/nrxqwr6f8qnxr6481mxlqnshxs2f5xim-master.cfg'1105buildbot # [ 25.390962] twistd[876]: 2026-08-23T03:06:32+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1106buildbot # [ 25.494994] twistd[876]: 2026-08-23T03:06:32+0000 [-] adding 9 new builders, removing 01107buildbot # [ 25.649137] twistd[876]: 2026-08-23T03:06:32+0000 [-] adding 3 new services, removing 01108buildbot # [ 25.802086] twistd[876]: 2026-08-23T03:06:32+0000 [-] adding 1 new change_sources, removing 01109buildbot # [ 25.807306] twistd[876]: 2026-08-23T03:06:32+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1110buildbot # [ 25.819603] twistd[876]: 2026-08-23T03:06:32+0000 [-] adding 14 new schedulers, removing 01111buildbot # [ 25.957272] twistd[876]: 2026-08-23T03:06:33+0000 [-] BuildbotSite starting on 80101112buildbot # [ 25.959822] twistd[876]: 2026-08-23T03:06:33+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x7975a80f9160>1113buildbot # [ 25.962289] twistd[876]: 2026-08-23T03:06:33+0000 [-] adding 5 new workers, removing 01114buildbot # [ 25.975059] twistd[876]: 2026-08-23T03:06:33+0000 [-] PBServerFactory starting on 99891115buildbot # [ 25.976604] twistd[876]: 2026-08-23T03:06:33+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x7975a80f97f0>1116buildbot # [ 26.029128] twistd[876]: 2026-08-23T03:06:33+0000 [-] Starting Worker -- version: 2026.08.231117buildbot # [ 26.030773] twistd[876]: 2026-08-23T03:06:33+0000 [-] recording hostname in twistd.hostname1118buildbot # [ 26.031946] twistd[876]: 2026-08-23T03:06:33+0000 [-] message from master: attached1119buildbot # [ 26.034399] twistd[876]: 2026-08-23T03:06:33+0000 [-] Got workerinfo from '__Janitor'1120buildbot # [ 26.041801] twistd[876]: 2026-08-23T03:06:33+0000 [-] bot attached1121buildbot # [ 26.042731] twistd[876]: 2026-08-23T03:06:33+0000 [-] Worker __Janitor attached to __Janitor1122buildbot # [ 26.043863] twistd[876]: 2026-08-23T03:06:33+0000 [-] message from master: attached1123buildbot # [ 26.058402] twistd[876]: 2026-08-23T03:06:33+0000 [-] BuildMaster is running1124buildbot # [ 26.122038] sshd-session[939]: Accepted publickey for root from ::1 port 49644 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81125buildbot # [ 26.134302] sshd-session[939]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1126buildbot # [ 26.177051] systemd[1]: Created slice Slice /user/0.1127buildbot # [ 26.180288] systemd[1]: Starting User Runtime Directory /run/user/0...1128buildbot # [ 26.195162] systemd-logind[452]: New session '1' of user 'root' with class 'user' and type 'tty'.1129buildbot # [ 26.224672] systemd[1]: Finished User Runtime Directory /run/user/0.1130buildbot # [ 26.229515] systemd[1]: Starting User Manager for UID 0...1131buildbot # [ 26.264283] (systemd)[945]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1132buildbot # [ 26.271965] systemd-logind[452]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1133buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1134buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.32 seconds)1135??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1136 File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391137buildbot: waiting for success: curl --fail --head http://localhost:80101138??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1139 File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391140buildbot # [ 26.403941] systemd[945]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1141buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1142buildbot # Dload Upload Total Spent Left Speed1143buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01144buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.14 seconds)1145(finished: subtest: Master and worker services start, in 4.61 seconds)1146subtest: Project is registered1147buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1148buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1149buildbot # Dload Upload Total Spent Left Speed1150buildbot # 0 0 0 0 0 0 0 0 0[ 26.618741] twistd[877]: 2026-08-23T03:06:33+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x79bfa8dc8050>1151buildbot # 100 266 100 266 0 0 8140 0 [ 26.633429] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=53702)1152buildbot # [ 26.636148] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1153buildbot # 0100 266 100 266 0 0 5545 0 010[ 26.649539] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1154buildbot # 0 266 100 266 0 0 4550 0 01155buildbot # [ 26.666125] twistd[876]: 2026-08-23T03:06:33+0000 [-] bot attached1156buildbot # [ 26.670502] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1157buildbot # [ 26.671856] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1158buildbot # [ 26.673630] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1159buildbot # [ 26.675360] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1160buildbot # [ 26.677364] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1161buildbot # [ 26.679184] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1162buildbot # [ 26.681138] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1163buildbot # [ 26.682501] twistd[876]: 2026-08-23T03:06:33+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1164buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.15 seconds)1165(finished: subtest: Project is registered, in 0.15 seconds)1166subtest: CLI list-schedules works1167buildbot: must succeed: 1168 cd /tmp/test-flake1169 buildbot-effects list-schedules1170 1171buildbot # [ 26.687633] systemd[945]: Queued start job for default target Main User Target.1172buildbot # [ 26.689144] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1173buildbot # [ 26.690300] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1174buildbot # [ 26.691327] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1175buildbot # [ 26.692259] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1176buildbot # [ 26.693219] systemd[945]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1177buildbot # [ 26.695393] systemd[945]: Created slice User Application Slice.1178buildbot # [ 26.696738] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1179buildbot # [ 26.698562] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1180buildbot # [ 26.700125] systemd[945]: Started Daily Cleanup of User's Temporary Directories.1181buildbot # [ 26.702391] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1182buildbot # [ 26.705794] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] message from master: attached1183buildbot # [ 26.707231] systemd[945]: Reached target Paths.1184buildbot # [ 26.707972] systemd[945]: Reached target Timers.1185buildbot # [ 26.708565] systemd[945]: Starting D-Bus User Message Bus Socket...1186buildbot # [ 26.709343] systemd[945]: Starting Create User Files and Directories...1187buildbot # [ 26.735405] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] Connected to buildmaster; worker is ready1188buildbot # [ 26.736735] twistd[877]: 2026-08-23T03:06:33+0000 [Broker,client] sending application-level keepalives every 600 seconds1189buildbot # [ 26.763126] systemd[945]: Finished Create User Files and Directories.1190buildbot # [ 26.841609] systemd[945]: Listening on D-Bus User Message Bus Socket.1191buildbot # [ 26.842877] systemd[945]: Reached target Sockets.1192buildbot # [ 26.844780] systemd[945]: Reached target Basic System.1193buildbot # [ 26.846979] systemd[945]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1194buildbot # [ 26.852843] systemd[945]: Reached target Main User Target.1195buildbot # [ 26.853558] systemd[945]: Startup finished in 522ms.1196buildbot # [ 26.855145] systemd[1]: Started User Manager for UID 0.1197buildbot # [ 26.855782] systemd[1]: Started Session 1 of User root.1198buildbot # [ 26.911920] sshd-session[980]: Received disconnect from ::1 port 49644:11: disconnected by user1199buildbot # [ 26.914786] sshd-session[980]: Disconnected from user root ::1 port 496441200buildbot # [ 26.915727] sshd-session[939]: pam_unix(sshd:session): session closed for user root1201buildbot # [ 26.920177] systemd[1]: session-1.scope: Deactivated successfully.1202buildbot # [ 26.922212] systemd-logind[452]: Session 1 logged out. Waiting for processes to exit.1203buildbot # [ 26.925478] systemd-logind[452]: Removed session 1.1204buildbot # [ 27.126582] sshd-session[985]: Accepted publickey for root from ::1 port 49648 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81205buildbot # [ 27.138602] sshd-session[985]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1206buildbot # [ 27.147426] systemd-logind[452]: New session '3' of user 'root' with class 'user' and type 'tty'.1207buildbot # [ 27.151521] systemd[1]: Started Session 3 of User root.1208buildbot # [ 27.199122] sshd-session[991]: Received disconnect from ::1 port 49648:11: disconnected by user1209buildbot # [ 27.201320] sshd-session[991]: Disconnected from user root ::1 port 496481210buildbot # [ 27.202756] sshd-session[985]: pam_unix(sshd:session): session closed for user root1211buildbot # [ 27.209650] systemd[1]: session-3.scope: Deactivated successfully.1212buildbot # [ 27.211937] systemd-logind[452]: Session 3 logged out. Waiting for processes to exit.1213buildbot # [ 27.214160] systemd-logind[452]: Removed session 3.1214buildbot # [ 27.243065] twistd[876]: 2026-08-23T03:06:34+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1215buildbot: (finished: must succeed: 1216 cd /tmp/test-flake1217 buildbot-effects list-schedules1218 , in 0.71 seconds)1219(finished: subtest: CLI list-schedules works, in 0.71 seconds)1220subtest: Push a new commit to trigger build1221buildbot: must succeed: 1222 cd /tmp/test-flake1223 echo "# trigger rebuild" >> flake.nix1224 git add flake.nix1225 git commit -m "Trigger build"1226 git push origin master1227 1228buildbot # Enumerating objects: 5, done.1229buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1230buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1231buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 297 bytes | 297.00 KiB/s, done.1232buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1233buildbot # To /srv/repos/test-flake.git1234buildbot # 1f18872..b0a7dc3 master -> master1235buildbot: (finished: must succeed: 1236 cd /tmp/test-flake1237 echo "# trigger rebuild" >> flake.nix1238 git add flake.nix1239 git commit -m "Trigger build"1240 git push origin master1241 , in 0.11 seconds)1242(finished: subtest: Push a new commit to trigger build, in 0.12 seconds)1243subtest: Wait for nix-eval build to complete1244??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1245 File "/nix/store/ri05iv8i720xw2qylqi7msjin73k6v9y-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281246buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1247buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1248buildbot # Dload Upload Total Spent Left Speed1249buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2426 0 0100 51 100 51 0 0 1975 0 0100 51 100 51 0 0 1682 0 01250buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1251buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1252buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1253buildbot # Dload Upload Total Spent Left Speed1254buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1931 0 0100 51 100 51 0 0 1646 0 0100 51 100 51 0 0 1444 0 01255buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1256buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1257buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1258buildbot # Dload Upload Total Spent Left Speed1259buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1924 0 0100 51 100 51 0 0 1650 0 0100 51 100 51 0 0 1448 0 01260buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1261buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1262buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1263buildbot # Dload Upload Total Spent Left Speed1264buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1860 0 0100 51 100 51 0 0 1596 0 0100 51 100 51 0 0 1405 0 01265buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1266buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1267buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1268buildbot # Dload Upload Total Spent Left Speed1269buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1845 0 0100 51 100 51 0 0 1582 0 0100 51 100 51 0 0 1395 0 01270buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1271buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1272buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1273buildbot # Dload Upload Total Spent Left Speed1274buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1876 0 0100 51 100 51 0 0 1601 0 0100 51 100 51 0 0 1409 0 01275buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1276buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1277buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1278buildbot # Dload Upload Total Spent Left Speed1279buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1752 0 0100 51 100 51 0 0 1506 0 0100 51 100 51 0 0 1330 0 01280buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1281buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1282buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1283buildbot # Dload Upload Total Spent Left Speed1284buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1929 0 0100 51 100 51 0 0 1647 0 0100 51 100 51 0 0 1446 0 01285buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1286buildbot # [ 36.057900] sshd-session[1054]: Accepted publickey for root from ::1 port 48184 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81287buildbot # [ 36.072602] sshd-session[1054]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1288buildbot # [ 36.079865] systemd-logind[452]: New session '4' of user 'root' with class 'user' and type 'tty'.1289buildbot # [ 36.084530] systemd[1]: Started Session 4 of User root.1290buildbot # [ 36.119693] sshd-session[1058]: Received disconnect from ::1 port 48184:11: disconnected by user1291buildbot # [ 36.121578] sshd-session[1058]: Disconnected from user root ::1 port 481841292buildbot # [ 36.122806] sshd-session[1054]: pam_unix(sshd:session): session closed for user root1293buildbot # [ 36.131308] systemd[1]: session-4.scope: Deactivated successfully.1294buildbot # [ 36.136992] systemd-logind[452]: Session 4 logged out. Waiting for processes to exit.1295buildbot # [ 36.138525] systemd-logind[452]: Removed session 4.1296buildbot # [ 36.320300] sshd-session[1063]: Accepted publickey for root from ::1 port 48200 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81297buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1298buildbot # [ 36.338282] sshd-session[1063]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1299buildbot # [ 36.352533] systemd-logind[452]: New session '5' of user 'root' with class 'user' and type 'tty'.1300buildbot # [ 36.356575] systemd[1]: Started Session 5 of User root.1301buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1302buildbot # Dload Upload[ 36.408660] sshd-session[1069]: Received disconnect from ::1 port 48200:11: disconnected by user1303buildbot # [ 36.409941] sshd-session[1069]: Disconnected from user root ::1 port 482001304buildbot # [ 36.410894] sshd-session[1063]: pam_unix(sshd:session): session closed for user root1305buildbot # Total Spent Left Speed1306buildbot # 0 [ 36.419282] systemd[1]: session-5.scope: Deactivated successfully.1307buildbot # 0 0 0[ 36.422321] systemd-logind[452]: Session 5 logged out. Waiting for processes to exit.1308buildbot # 0 0 [ 36.425769] systemd-logind[452]: Removed session 5.1309buildbot # 0 0 0100 51 100 51 0 0 1190 0 0100 51 100 51 0 0 1028 0 0100 51 100 51 0 0 900 0 01310buildbot # [ 36.460741] twistd[876]: 2026-08-23T03:06:43+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1311buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1312buildbot # [ 36.496074] twistd[876]: 2026-08-23T03:06:43+0000 [-] gitpoller: processing 1 changes: ['b0a7dc3b3632fa94201bb1b21da391ae0b7ca467'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1313buildbot # [ 36.571051] twistd[876]: 2026-08-23T03:06:43+0000 [-] added change with revision b0a7dc3b3632fa94201bb1b21da391ae0b7ca467 to database1314buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1315buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1316buildbot # Dload Upload Total Spent Left Speed1317buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1857 0 0100 51 100 51 0 0 1590 0 0100 51 100 51 0 0 1402 0 01318buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1319buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1320buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1321buildbot # Dload Upload Total Spent Left Speed1322buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1922 0 0100 51 100 51 0 0 1630 0 0100 51 100 51 0 0 1432 0 01323buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1324buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1325buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1326buildbot # Dload Upload Total Spent Left Speed1327buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2118 0 0100 51 100 51 0 0 1780 0 0100 51 100 51 0 0 1547 0 01328buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1329buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1330buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1331buildbot # Dload Upload Total Spent Left Speed1332buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2038 0 0100 51 100 51 0 0 1741 0 0100 51 100 51 0 0 1519 0 01333buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1334buildbot # [ 41.616467] twistd[876]: 2026-08-23T03:06:48+0000 [-] added buildset 1 to database1335buildbot # [ 41.765667] twistd[876]: 2026-08-23T03:06:48+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1336buildbot # [ 41.770877] twistd[876]: 2026-08-23T03:06:48+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1337buildbot # [ 41.833056] twistd[876]: 2026-08-23T03:06:48+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1338buildbot # [ 41.836590] twistd[876]: 2026-08-23T03:06:48+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1339buildbot # [ 41.838768] twistd[876]: 2026-08-23T03:06:49+0000 [-] sending ping1340buildbot # [ 41.840898] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] message from master: ping1341buildbot # [ 41.842430] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] ping finished: success1342buildbot # [ 41.862676] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1343buildbot # [ 41.863886] twistd[876]: 2026-08-23T03:06:49+0000 [-] command '['git', '--version']' in dir 'build'1344buildbot # [ 41.865419] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 0): startCommand:shell1345buildbot # [ 41.867551] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1346buildbot # [ 41.868913] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '--version']): git --version1347buildbot # [ 41.870404] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1348buildbot # [ 41.872280] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1349buildbot # [ 41.873569] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1350buildbot # [ 41.874942] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '--version']): using PTY: False1351buildbot # [ 41.893080] twistd[877]: 2026-08-23T03:06:49+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0163161352buildbot # [ 41.894547] twistd[877]: 2026-08-23T03:06:49+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa8dca7b0>1353buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1354buildbot # [ 41.924128] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01355buildbot # % To[ 41.967152] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteCommand 'stat' at 133546238036352>: RemoteCommand.run [1]1356buildbot # tal % Received % Xferd[ 41.971304] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 1): startCommand:stat1357buildbot # [ 41.972296] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1358buildbot # [ 41.974824] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x79bfa94a7b60>1359buildbot # Average Speed Time Time Time Cu[ 41.979681] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 133546238036352> rc=21360buildbot # rrent1361buildbot # Dload Upload Total Spent Left Speed1362buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 12059 0 [ 42.003075] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteCommand 'mkdir' at 133545975675344>: RemoteCommand.run [2]1363buildbot # 0100 401 100 401 0 0 9889 0 0100 401 100 401 0 0 8932 0 01364buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1365buildbot # [ 42.022498] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 2): startCommand:mkdir1366buildbot # [ 42.023826] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x79bfa8dc9010>1367buildbot # [ 42.026294] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 133545975675344> rc=01368buildbot # [ 42.033845] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteCommand 'downloadFile' at 133545975675984>: RemoteCommand.run [3]1369buildbot # [ 42.069721] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 3): startCommand:downloadFile1370buildbot # [ 42.072465] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x79bfa8dc8d70>1371buildbot # [ 42.075099] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 133545975675984> rc=01372buildbot # [ 42.082645] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteCommand 'listdir' at 133545975676304>: RemoteCommand.run [4]1373buildbot # [ 42.119054] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 4): startCommand:listdir1374buildbot # [ 42.120115] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x79bfa8dc8c20>1375buildbot # [ 42.122345] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 133545975676304> rc=01376buildbot # [ 42.130185] twistd[876]: 2026-08-23T03:06:49+0000 [-] No git repo present, making full clone1377buildbot # [ 42.133537] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1378buildbot # [ 42.136934] twistd[876]: 2026-08-23T03:06:49+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1379buildbot # [ 42.165929] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 5): startCommand:shell1380buildbot # [ 42.167918] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1381buildbot # [ 42.173977] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1382buildbot # [ 42.194415] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1383buildbot # [ 42.198043] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1384buildbot # [ 42.200964] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1385buildbot # [ 42.205694] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1386buildbot # [ 42.410388] sshd-session[1104]: Accepted publickey for root from ::1 port 48202 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81387buildbot # [ 42.423169] sshd-session[1104]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1388buildbot # [ 42.431946] systemd-logind[452]: New session '6' of user 'root' with class 'user' and type 'tty'.1389buildbot # [ 42.434661] systemd[1]: Started Session 6 of User root.1390buildbot # [ 42.495946] sshd-session[1108]: Received disconnect from ::1 port 48202:11: disconnected by user1391buildbot # [ 42.497233] sshd-session[1108]: Disconnected from user root ::1 port 482021392buildbot # [ 42.498341] sshd-session[1104]: pam_unix(sshd:session): session closed for user root1393buildbot # [ 42.503945] systemd[1]: session-6.scope: Deactivated successfully.1394buildbot # [ 42.507675] systemd-logind[452]: Session 6 logged out. Waiting for processes to exit.1395buildbot # [ 42.509631] systemd-logind[452]: Removed session 6.1396buildbot # [ 42.528078] twistd[877]: 2026-08-23T03:06:49+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3434301397buildbot # [ 42.531265] twistd[877]: 2026-08-23T03:06:49+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa8d816d0>1398buildbot # [ 42.535049] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01399buildbot # [ 42.557454] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']'>: RemoteCommand.run [6]1400buildbot # [ 42.560147] twistd[876]: 2026-08-23T03:06:49+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']' in dir 'build'1401buildbot # [ 42.579879] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 6): startCommand:shell1402buildbot # [ 42.582937] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): RunProcess._startCommand1403buildbot # [ 42.585534] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f b0a7dc3b3632fa94201bb1b21da391ae0b7ca4671404buildbot # [ 42.589374] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1405buildbot # [ 42.592500] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): watching logfiles {}1406buildbot # [ 42.595096] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']1407buildbot # [ 42.599186] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): using PTY: False1408buildbot # [ 42.622618] twistd[877]: 2026-08-23T03:06:49+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']): command finished with signal None, exit code 0, elapsedTime: 0.0407361409buildbot # [ 42.625841] twistd[877]: 2026-08-23T03:06:49+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa8d82850>1410buildbot # [ 42.646920] twistd[876]: 2026-08-23T03:06:49+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467']'> rc=01411buildbot # [ 42.669562] twistd[876]: 2026-08-23T03:06:49+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1412buildbot # [ 42.672127] twistd[876]: 2026-08-23T03:06:49+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1413buildbot # [ 42.691882] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command 7): startCommand:shell1414buildbot # [ 42.693245] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1415buildbot # [ 42.697736] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1416buildbot # [ 42.701373] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1417buildbot # [ 42.704398] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1418buildbot # [ 42.706828] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1419buildbot # [ 42.710661] twistd[877]: 2026-08-23T03:06:49+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1420buildbot # [ 42.859759] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1627731421buildbot # [ 42.862857] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa9376780>1422buildbot # [ 42.868059] twistd[876]: 2026-08-23T03:06:50+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01423buildbot # [ 42.883745] twistd[876]: 2026-08-23T03:06:50+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1424buildbot # [ 42.885857] twistd[876]: 2026-08-23T03:06:50+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1425buildbot # [ 42.911834] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command 8): startCommand:shell1426buildbot # [ 42.914890] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1427buildbot # [ 42.916169] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1428buildbot # [ 42.917328] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1429buildbot # [ 42.919069] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1430buildbot # [ 42.920258] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1431buildbot # [ 42.921570] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1432buildbot # [ 42.936819] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0229751433buildbot # [ 42.938884] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa93768b0>1434buildbot # [ 42.967574] twistd[876]: 2026-08-23T03:06:50+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01435buildbot # [ 42.988742] twistd[876]: 2026-08-23T03:06:50+0000 [-] Got Git revision b0a7dc3b3632fa94201bb1b21da391ae0b7ca4671436buildbot # [ 42.990155] twistd[876]: 2026-08-23T03:06:50+0000 [-] <RemoteCommand 'rmdir' at 133545976168848>: RemoteCommand.run [9]1437buildbot # [ 43.011067] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command 9): startCommand:rmdir1438buildbot # [ 43.012721] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1439buildbot # [ 43.014404] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1440buildbot # [ 43.016692] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1441buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1442buildbot # [ 43.020408] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1443buildbot # [ 43.022091] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1444buildbot # [ 43.024259] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1445buildbot # [ 43.040407] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0210201446buildbot # [ 43.043907] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x79bfa8dcb380>1447buildbot # [ 43.069933] twistd[876]: 2026-08-23T03:06:50+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 133545976168848> rc=01448buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1449buildbot # Dload Upload Total Spent[ 43.100936] twistd[876]: 2026-08-23T03:06:50+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1450buildbot # Left Speed1451buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 10776 0 0100 401 100 4[ 43.129770] twistd[876]: 2026-08-23T03:06:50+0000 [-] step 'git' complete: success (None)1452buildbot # 01 0 0 9224 0 0100 401 100 401 0 0 7924 0 01453buildbot # [ 43.145138] twistd[876]: 2026-08-23T03:06:50+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7975a9cfd7f0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7975a9cfeba0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7975a9cfeba0>)])1454buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1455buildbot # [ 43.160730] twistd[876]: 2026-08-23T03:06:50+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1456buildbot # [ 43.162369] twistd[876]: 2026-08-23T03:06:50+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1457buildbot # [ 43.164660] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command 10): startCommand:shell1458buildbot # [ 43.166333] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1459buildbot # [ 43.168178] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1460buildbot # [ 43.170286] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1461buildbot # [ 43.172541] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1462buildbot # [ 43.175628] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1463buildbot # [ 43.177776] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1464buildbot # [ 43.199593] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0249541465buildbot # [ 43.201792] twistd[877]: 2026-08-23T03:06:50+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa9396e70>1466buildbot # [ 43.223810] twistd[876]: 2026-08-23T03:06:50+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01467buildbot # [ 43.228941] twistd[876]: 2026-08-23T03:06:50+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1468buildbot # [ 43.232387] twistd[876]: 2026-08-23T03:06:50+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1469buildbot # [ 43.269099] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command 11): startCommand:shell1470buildbot # [ 43.270476] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1471buildbot # [ 43.274272] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1472buildbot # [ 43.279809] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1473buildbot # [ 43.284022] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1474buildbot # [ 43.287589] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1475buildbot # [ 43.295141] twistd[877]: 2026-08-23T03:06:50+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1476buildbot # [ 43.599091] systemd[1]: Started Nix Daemon.1477buildbot # [ 43.716538] nix-daemon[1151]: accepted connection from pid 1149, user buildbot-worker1478buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1479buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1480buildbot # Dload Upload Total Spent Left Speed1481buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 18176 0 0100 401 100 401 0 0 15108 0 0100 401 100 401 0 0 13025 0 01482buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1483buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1484buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1485buildbot # Dload Upload Total Spent Left Speed1486buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 17744 0 0100 401 100 401 0 0 14390 0 0100 401 100 401 0 0 12422 0 01487buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1488buildbot # [ 46.066699] sshd-session[1168]: Accepted publickey for root from ::1 port 55914 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81489buildbot # [ 46.087338] sshd-session[1168]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1490buildbot # [ 46.100744] systemd-logind[452]: New session '7' of user 'root' with class 'user' and type 'tty'.1491buildbot # [ 46.104809] systemd[1]: Started Session 7 of User root.1492buildbot # [ 46.147907] sshd-session[1171]: Received disconnect from ::1 port 55914:11: disconnected by user1493buildbot # [ 46.149186] sshd-session[1171]: Disconnected from user root ::1 port 559141494buildbot # [ 46.150395] sshd-session[1168]: pam_unix(sshd:session): session closed for user root1495buildbot # [ 46.160070] systemd[1]: session-7.scope: Deactivated successfully.1496buildbot # [ 46.164534] systemd-logind[452]: Session 7 logged out. Waiting for processes to exit.1497buildbot # [ 46.165517] systemd-logind[452]: Removed session 7.1498buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1499buildbot # [ 46.369302] sshd-session[1176]: Accepted publickey for root from ::1 port 55916 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81500buildbot # [ 46.398182] sshd-session[1176]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1501buildbot # [ 46.407084] systemd-logind[452]: New session '8' of user 'root' with class 'user' and type 'tty'.1502buildbot # [ 46.411229] systemd[1]: Started Session 8 of User root.1503buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1504buildbot # Dload Upload Total Spent Left Speed1505buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15528 0 [ 46.477239] sshd-session[1182]: Received disconnect from ::1 port 55916:11: disconnected by user1506buildbot # 0100 [ 46.479261] sshd-session[1182]: Disconnected from user root ::1 port 559161507buildbot # 401 100 401 0 0 11128 [ 46.482380] sshd-session[1176]: pam_unix(sshd:session): session closed for user root1508buildbot # 0 0100 [ 46.490668] systemd[1]: session-8.scope: Deactivated successfully.1509buildbot # [ 46.492415] systemd-logind[452]: Session 8 logged out. Waiting for processes to exit.1510buildbot # 401 100 401 [ 46.496072] systemd-logind[452]: Removed session 8.1511buildbot # 0 0 8564 0 01512buildbot # [ 46.509079] twistd[876]: 2026-08-23T03:06:53+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1513buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1514buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1515buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1516buildbot # Dload Upload Total Spent Left Speed1517buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15207 0 0100 401 100 401 0 0 12908 0 0100 401 100 401 0 0 11280 0 01518buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1519buildbot # [ 48.177625] nix-daemon[1151]: accepted connection from pid 1195, user buildbot-worker1520buildbot # [ 48.239830] twistd[877]: 2026-08-23T03:06:55+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 4.9454721521buildbot # [ 48.244176] twistd[877]: 2026-08-23T03:06:55+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa92f78a0>1522buildbot # [ 48.249042] twistd[876]: 2026-08-23T03:06:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01523buildbot # [ 48.282739] twistd[876]: 2026-08-23T03:06:55+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7975a9cfd7f0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7975a9cfeba0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7975a9cfeba0>)]1524buildbot # [ 48.294768] twistd[876]: 2026-08-23T03:06:55+0000 [-] step 'Evaluate flake' complete: success (None)1525buildbot # [ 48.317718] twistd[876]: 2026-08-23T03:06:55+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1526buildbot # [ 48.326536] twistd[876]: 2026-08-23T03:06:55+0000 [-] step 'build flake' complete: success (None)1527buildbot # [ 48.337634] twistd[876]: 2026-08-23T03:06:55+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7975a9d7f110>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7975a9d7f1c0>)): []1528buildbot # [ 48.345409] twistd[876]: 2026-08-23T03:06:55+0000 [-] step 'Process skipped builds' complete: skipped (None)1529buildbot # [ 48.356201] twistd[876]: 2026-08-23T03:06:55+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1530buildbot # [ 48.358468] twistd[876]: 2026-08-23T03:06:55+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1531buildbot # [ 48.361646] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command 12): startCommand:shell1532buildbot # [ 48.362954] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1533buildbot # [ 48.364858] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1534buildbot # [ 48.367284] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1535buildbot # [ 48.369688] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1536buildbot # [ 48.371541] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1537buildbot # [ 48.375548] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1538buildbot # [ 48.389787] twistd[877]: 2026-08-23T03:06:55+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0153821539buildbot # [ 48.392108] twistd[877]: 2026-08-23T03:06:55+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa92f7ce0>1540buildbot # [ 48.422028] twistd[876]: 2026-08-23T03:06:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01541buildbot # [ 48.445651] twistd[876]: 2026-08-23T03:06:55+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1542buildbot # [ 48.452916] twistd[876]: 2026-08-23T03:06:55+0000 [-] step 'Cleanup drv paths' complete: success (None)1543buildbot # [ 48.463403] twistd[876]: 2026-08-23T03:06:55+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1544buildbot # [ 48.466390] twistd[876]: 2026-08-23T03:06:55+0000 [-] command '['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1545buildbot # [ 48.469115] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command 13): startCommand:shell1546buildbot # [ 48.470568] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1547buildbot # [ 48.472802] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev b0a7dc3b3632fa94201bb1b21da391ae0b7ca467 --branch master --repo test-flake1548buildbot # [ 48.475619] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1549buildbot # [ 48.478305] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1550buildbot # [ 48.481888] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', b'--branch', b'master', b'--repo', b'test-flake']1551buildbot # [ 48.484822] twistd[877]: 2026-08-23T03:06:55+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1552buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1553buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1554buildbot # Dload Upload Total Spent Left Speed1555buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14914 0 0100 401 100 401 0 0 11700 0 0100 401 100 401 0 0 9850 0 01556buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1557buildbot # [ 48.885894] nix-daemon[1151]: accepted connection from pid 1207, user buildbot-worker1558buildbot # [ 48.918234] twistd[877]: 2026-08-23T03:06:56+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4373521559buildbot # [ 48.920830] twistd[877]: 2026-08-23T03:06:56+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa93a7650>1560buildbot # [ 48.925658] twistd[876]: 2026-08-23T03:06:56+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']'> rc=01561buildbot # [ 48.958468] twistd[876]: 2026-08-23T03:06:56+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7975a9d7f690>, logEnviron=False)): []1562buildbot # [ 48.967998] twistd[876]: 2026-08-23T03:06:56+0000 [-] step 'Evaluate effects' complete: success (None)1563buildbot # [ 48.980039] twistd[876]: 2026-08-23T03:06:56+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1564buildbot # [ 48.986424] twistd[876]: 2026-08-23T03:06:56+0000 [-] step 'Buildbot effect' complete: success (None)1565buildbot # [ 48.997624] twistd[876]: 2026-08-23T03:06:56+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1566buildbot # [ 48.999755] twistd[876]: 2026-08-23T03:06:56+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1567buildbot # [ 49.003041] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command 14): startCommand:shell1568buildbot # [ 49.004331] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1569buildbot # [ 49.006597] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev b0a7dc3b3632fa94201bb1b21da391ae0b7ca467 --branch master --repo test-flake1570buildbot # [ 49.009568] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1571buildbot # [ 49.012444] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1572buildbot # [ 49.016052] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', b'--branch', b'master', b'--repo', b'test-flake']1573buildbot # [ 49.019203] twistd[877]: 2026-08-23T03:06:56+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1574buildbot # [ 49.388841] nix-daemon[1151]: accepted connection from pid 1216, user buildbot-worker1575buildbot # [ 49.419358] twistd[877]: 2026-08-23T03:06:56+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4039751576buildbot # [ 49.422164] twistd[877]: 2026-08-23T03:06:56+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79bfa93a7950>1577buildbot # [ 49.426281] twistd[876]: 2026-08-23T03:06:56+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'b0a7dc3b3632fa94201bb1b21da391ae0b7ca467', '--branch', 'master', '--repo', 'test-flake']'> rc=01578buildbot # [ 49.463768] twistd[876]: 2026-08-23T03:06:56+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7975a9cfc050>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7975a9d7f950>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7975a9d7fa00>, logEnviron=False)): []1579buildbot # [ 49.474447] twistd[876]: 2026-08-23T03:06:56+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1580buildbot # [ 49.475560] twistd[876]: 2026-08-23T03:06:56+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1581buildbot # [ 49.483981] twistd[876]: 2026-08-23T03:06:56+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1582buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1583buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1584buildbot # Dload Upload Total Spent Left Speed1585buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 17447 0 0100 411 100 411 0 0 14701 0 0100 411 100 411 0 0 12734 0 01586buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1587(finished: subtest: Wait for nix-eval build to complete, in 22.33 seconds)1588subtest: Schedule cache is created1589buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1590buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1591buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1592buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1593(finished: subtest: Schedule cache is created, in 0.06 seconds)1594subtest: Nightly schedulers are created1595buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1596buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1597buildbot # Dload Upload Total Spent Left Speed1598buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 61760 0 0100 3793 100 3793 0 0 57506 0 0100 3793 100 3793 0 0 53912 0 01599buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds)1600buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1601buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1602buildbot # Dload Upload Total Spent Left Speed1603buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 54911 0 0100 3793 100 3793 0 0 51479 0 0100 3793 100 3793 0 0 48602 0 01604buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds)1605buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1606buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1607buildbot # Dload Upload Total Spent Left Speed1608buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 51235 0 0100 3793 100 3793 0 0 48280 0 0100 3793 100 3793 0 0 45748 0 01609buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1610buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1611buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1612buildbot # Dload Upload Total Spent Left Speed1613buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 50722 0 0100 3793 100 3793 0 0 47751 0 0100 3793 100 3793 0 0 45266 0 01614buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1615buildbot # [ 54.460815] twistd[876]: 2026-08-23T03:07:01+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1616buildbot # [ 54.464975] twistd[876]: 2026-08-23T03:07:01+0000 [-] beginning configuration update1617buildbot # [ 54.469327] twistd[876]: 2026-08-23T03:07:01+0000 [-] Loading configuration from '/nix/store/nrxqwr6f8qnxr6481mxlqnshxs2f5xim-master.cfg'1618buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1619buildbot # [ 54.521312] twistd[876]: 2026-08-23T03:07:01+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1620buildbot # [ 54.523277] twistd[876]: 2026-08-23T03:07:01+0000 [-] adding 1 new schedulers, removing 01621buildbot # [ 54.640906] twistd[876]: 2026-08-23T03:07:01+0000 [-] configuration update complete (took 0.176 seconds)1622buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1623buildbot # Dload Upload Total Spent Left Speed1624buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 55406 0 0100 4079 100 4079 0 0 52031 0 0100 4079 100 4079 0 0 49288 0 01625buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.23 seconds)1626buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1627buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1628buildbot # Dload Upload Total Spent Left Speed1629buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 62825 0 0100 4079 100 4079 0 0 58654 0 0100 4079 100 4079 0 0 55203 0 01630buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds)1631(finished: subtest: Nightly schedulers are created, in 4.97 seconds)1632subtest: Scheduled effect builder exists1633buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1634buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1635buildbot # Dload Upload Total Spent Left Speed1636buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 124.5k 0 0100 2371 100 2371 0 0 100.7k 0 0100 2371 100 2371 0 0 86656 0 01637buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.08 seconds)1638(finished: subtest: Scheduled effect builder exists, in 0.08 seconds)1639(finished: run the VM test script, in 55.87 seconds)1640test script finished in 55.92s1641cleanup1642kill QemuMachine (pid 45)1643buildbot # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/3n4qphl9s728sz8frmpqqrv9b1m87g68-python3-3.14.7/bin/python3.14)1644(finished: cleanup, in 0.25 seconds)1645additionally exposed symbols:1646 buildbot,1647 vlan1,1648 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh