vm-test-run-scheduled-effects
checks.x86_64-linux.scheduled-effects
· build #58
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.01 seconds)5Test will time out and terminate in 3600 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 12)12buildbot # Formatting '/build/vm-state-buildbot/tmp.KUWK8I6hhW', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 77952788-d205-4e96-8b24-cc05924efded17buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/rf1dkf6byz0zcdzgxvxv1frdwih6cwgd-nixos-system-buildbot-test/init regInfo=/nix/store/cj43gshsncklacpp6v0lqwj8h2sgxc9d-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved51buildbot # [ 0.000000] NX (Execute Disable) protection: active52buildbot # [ 0.000000] APIC: Static calls initialized53buildbot # [ 0.000000] SMBIOS 2.8 present.54buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201455buildbot # [ 0.000000] DMI: Memory slots populated: 1/156buildbot # [ 0.000000] Hypervisor detected: KVM57buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000058buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0059buildbot # [ 0.000000] kvm-clock: using sched offset of 499254064 cycles60buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns61buildbot # [ 0.000004] tsc: Detected 2400.008 MHz processor62buildbot # [ 0.000808] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000063buildbot # [ 0.000835] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs64buildbot # [ 0.000837] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT65buildbot # [ 0.002725] found SMP MP-table at [mem 0x000f5470-0x000f547f]66buildbot # [ 0.002736] Using GB pages for direct mapping67buildbot # [ 0.002813] RAMDISK: [mem 0x3e4ba000-0x3ffcffff]68buildbot # [ 0.002821] ACPI: Early table checksum verification disabled69buildbot # [ 0.002824] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )70buildbot # [ 0.002827] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)71buildbot # [ 0.002831] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)72buildbot # [ 0.002838] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002840] ACPI: FACS 0x000000003FFE0000 00004074buildbot # [ 0.002842] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002843] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)76buildbot # [ 0.002845] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002846] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3]78buildbot # [ 0.002847] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f]79buildbot # [ 0.002848] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]80buildbot # [ 0.002848] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b]81buildbot # [ 0.002849] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3]82buildbot # [ 0.002849] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb]83buildbot # [ 0.003066] No NUMA configuration found84buildbot # [ 0.003067] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff]85buildbot # [ 0.003070] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff]86buildbot # [ 0.006018] Zone ranges:87buildbot # [ 0.006019] DMA [mem 0x0000000000001000-0x0000000000ffffff]88buildbot # [ 0.006020] DMA32 [mem 0x0000000001000000-0x000000003ffdafff]89buildbot # [ 0.006022] Normal empty90buildbot # [ 0.006022] Device empty91buildbot # [ 0.006023] Movable zone start for each node92buildbot # [ 0.006024] Early memory node ranges93buildbot # [ 0.006024] node 0: [mem 0x0000000000001000-0x000000000009efff]94buildbot # [ 0.006025] node 0: [mem 0x0000000000100000-0x000000003ffdafff]95buildbot # [ 0.006026] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff]96buildbot # [ 0.006105] On node 0, zone DMA: 1 pages in unavailable ranges97buildbot # [ 0.006390] On node 0, zone DMA: 97 pages in unavailable ranges98buildbot # [ 0.025561] On node 0, zone DMA32: 37 pages in unavailable ranges99buildbot # [ 0.025959] ACPI: PM-Timer IO Port: 0x608100buildbot # [ 0.025971] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])101buildbot # [ 0.026000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23102buildbot # [ 0.026002] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)103buildbot # [ 0.026004] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)104buildbot # [ 0.026005] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)105buildbot # [ 0.026006] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)106buildbot # [ 0.026007] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)107buildbot # [ 0.026009] ACPI: Using ACPI (MADT) for SMP configuration information108buildbot # [ 0.026010] ACPI: HPET id: 0x8086a201 base: 0xfed00000109buildbot # [ 0.026013] TSC deadline timer available110buildbot # [ 0.026017] CPU topo: Max. logical packages: 1111buildbot # [ 0.026018] CPU topo: Max. logical dies: 1112buildbot # [ 0.026018] CPU topo: Max. dies per package: 1113buildbot # [ 0.026021] CPU topo: Max. threads per core: 1114buildbot # [ 0.026022] CPU topo: Num. cores per package: 1115buildbot # [ 0.026022] CPU topo: Num. threads per package: 1116buildbot # [ 0.026023] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs117buildbot # [ 0.026041] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()118buildbot # [ 0.026070] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]119buildbot # [ 0.026072] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]120buildbot # [ 0.026073] [mem 0x40000000-0xfeffbfff] available for PCI devices121buildbot # [ 0.026075] Booting paravirtualized kernel on KVM122buildbot # [ 0.026078] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns123buildbot # [ 0.030514] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1124buildbot # [ 0.032830] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152125buildbot # [ 0.032874] kvm-guest: PV spinlocks disabled, single CPU126buildbot # [ 0.032875] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/rf1dkf6byz0zcdzgxvxv1frdwih6cwgd-nixos-system-buildbot-test/init regInfo=/nix/store/cj43gshsncklacpp6v0lqwj8h2sgxc9d-closure-info/registration console=ttyS0,115200n8 console=tty0127buildbot # [ 0.032969] Unknown kernel command line parameters "regInfo=/nix/store/cj43gshsncklacpp6v0lqwj8h2sgxc9d-closure-info/registration", will be passed to user space.128buildbot # [ 0.032982] random: crng init done129buildbot # [ 0.032983] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes130buildbot # [ 0.033004] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)131buildbot # [ 0.033571] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)132buildbot # [ 0.033600] Fallback order for Node 0: 0133buildbot # [ 0.033603] Built 1 zonelists, mobility grouping on. Total pages: 262009134buildbot # [ 0.033604] Policy zone: DMA32135buildbot # [ 0.035928] mem auto-init: stack:all(zero), heap alloc:on, heap free:off136buildbot # [ 0.038453] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1137buildbot # [ 0.040831] allocated 2097152 bytes of page_ext138buildbot # [ 0.051009] ftrace: allocating 48598 entries in 192 pages139buildbot # [ 0.051012] ftrace: allocated 192 pages with 2 groups140buildbot # [ 0.051857] Dynamic Preempt: lazy141buildbot # [ 0.052032] rcu: Preemptible hierarchical RCU implementation.142buildbot # [ 0.052032] rcu: RCU event tracing is enabled.143buildbot # [ 0.052033] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.144buildbot # [ 0.052034] Trampoline variant of Tasks RCU enabled.145buildbot # [ 0.052035] Rude variant of Tasks RCU enabled.146buildbot # [ 0.052035] Tracing variant of Tasks RCU enabled.147buildbot # [ 0.052036] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.148buildbot # [ 0.052037] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1149buildbot # [ 0.052059] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.150buildbot # [ 0.052060] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.151buildbot # [ 0.052061] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.152buildbot # [ 0.056414] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16153buildbot # [ 0.056714] rcu: srcu_init: Setting srcu_struct sizes based on contention.154buildbot # [ 0.056819] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)155buildbot # [ 0.060285] Console: colour VGA+ 80x25156buildbot # [ 0.060288] printk: legacy console [tty0] enabled157buildbot # [ 0.088310] printk: legacy console [ttyS0] enabled158buildbot # [ 0.179026] ACPI: Core revision 20250807159buildbot # [ 0.179970] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns160buildbot # [ 0.181510] APIC: Switch to symmetric I/O mode setup161buildbot # [ 0.182457] x2apic enabled162buildbot # [ 0.183196] APIC: Switched APIC routing to: physical x2apic163buildbot # [ 0.184996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1164buildbot # [ 0.185961] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns165buildbot # [ 0.187591] Calibrating delay loop (skipped) preset value.. 4800.01 BogoMIPS (lpj=2400008)166buildbot # [ 0.188677] x86/cpu: User Mode Instruction Prevention (UMIP) activated167buildbot # [ 0.189706] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127168buildbot # [ 0.190588] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0169buildbot # [ 0.191592] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto170buildbot # [ 0.192588] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl171buildbot # [ 0.193588] Transient Scheduler Attacks: Vulnerable: No microcode172buildbot # [ 0.194588] Spectre V2 : Mitigation: Enhanced / Automatic IBRS173buildbot # [ 0.195588] Speculative Return Stack Overflow: Mitigation: Safe RET174buildbot # [ 0.196588] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization175buildbot # [ 0.197592] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier176buildbot # [ 0.199588] active return thunk: srso_alias_return_thunk177buildbot # [ 0.200430] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'178buildbot # [ 0.201588] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'179buildbot # [ 0.202537] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'180buildbot # [ 0.203588] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'181buildbot # [ 0.204588] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'182buildbot # [ 0.205588] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'183buildbot # [ 0.206588] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'184buildbot # [ 0.207589] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256185buildbot # [ 0.208588] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64186buildbot # [ 0.209588] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512187buildbot # [ 0.210588] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024188buildbot # [ 0.211588] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8189buildbot # [ 0.212588] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.190buildbot # [ 0.247464] Freeing SMP alternatives memory: 44K191buildbot # [ 0.248112] pid_max: default: 32768 minimum: 301192buildbot # [ 0.248697] LSM: initializing lsm=capability,landlock,yama,bpf,ima193buildbot # [ 0.249711] landlock: Up and running.194buildbot # [ 0.250588] Yama: becoming mindful.195buildbot # [ 0.251644] LSM support for eBPF active196buildbot # [ 0.252347] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)197buildbot # [ 0.253453] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)198buildbot # [ 0.255762] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)199buildbot # [ 0.257188] Performance Events: Fam17h+ core perfctr, AMD PMU driver.200buildbot # [ 0.257597] ... version: 2201buildbot # [ 0.258261] ... bit width: 48202buildbot # [ 0.258590] ... generic counters: 6203buildbot # [ 0.259293] ... generic bitmap: 000000000000003f204buildbot # [ 0.259591] ... fixed-purpose counters: 0205buildbot # [ 0.260260] ... fixed-purpose bitmap: 0000000000000000206buildbot # [ 0.260590] ... value mask: 0000ffffffffffff207buildbot # [ 0.261457] ... max period: 00007fffffffffff208buildbot # [ 0.262257] ... global_ctrl mask: 000000000000003f209buildbot # [ 0.262688] signal: max sigframe size: 3376210buildbot # [ 0.263478] rcu: Hierarchical SRCU implementation.211buildbot # [ 0.264165] rcu: Max phase no-delay instances is 400.212buildbot # [ 0.269136] smp: Bringing up secondary CPUs ...213buildbot # [ 0.269604] smp: Brought up 1 node, 1 CPU214buildbot # [ 0.270251] smpboot: Total of 1 processors activated (4800.01 BogoMIPS)215buildbot # [ 0.270819] Memory: 942424K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved)216buildbot # [ 0.271824] devtmpfs: initialized217buildbot # [ 0.272517] x86/mm: Memory block size: 128MB218buildbot # [ 0.274101] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns219buildbot # [ 0.274614] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)220buildbot # [ 0.275623] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).221buildbot # [ 0.276684] pinctrl core: initialized pinctrl subsystem222buildbot # [ 0.277758] PM: RTC time: 02:58:51, date: 2026-08-23223buildbot # [ 0.281473] NET: Registered PF_NETLINK/PF_ROUTE protocol family224buildbot # [ 0.282690] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations225buildbot # [ 0.283609] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations226buildbot # [ 0.284750] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations227buildbot # [ 0.285600] audit: initializing netlink subsys (disabled)228buildbot # [ 0.286720] thermal_sys: Registered thermal governor 'fair_share'229buildbot # [ 0.286722] thermal_sys: Registered thermal governor 'bang_bang'230buildbot # [ 0.287591] thermal_sys: Registered thermal governor 'step_wise'231buildbot # [ 0.288487] thermal_sys: Registered thermal governor 'user_space'232buildbot # [ 0.289308] audit: type=2000 audit(1787453931.838:1): state=initialized audit_enabled=0 res=1233buildbot # [ 0.290594] thermal_sys: Registered thermal governor 'power_allocator'234buildbot # [ 0.290608] cpuidle: using governor menu235buildbot # [ 0.292805] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5236buildbot # [ 0.293828] PCI: Using configuration type 1 for base access237buildbot # [ 0.294591] PCI: Using configuration type 1 for extended access238buildbot # [ 0.295711] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.239buildbot # [ 0.300852] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages240buildbot # [ 0.301592] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page241buildbot # [ 0.306591] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages242buildbot # [ 0.307590] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page243buildbot # [ 0.317969] ACPI: Added _OSI(Module Device)244buildbot # [ 0.318592] ACPI: Added _OSI(Processor Device)245buildbot # [ 0.319285] ACPI: Added _OSI(Processor Aggregator Device)246buildbot # [ 0.325428] ACPI: 1 ACPI AML tables successfully acquired and loaded247buildbot # [ 0.329331] ACPI: Interpreter enabled248buildbot # [ 0.329606] ACPI: PM: (supports S0 S3 S4 S5)249buildbot # [ 0.330280] ACPI: Using IOAPIC for interrupt routing250buildbot # [ 0.330607] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug251buildbot # [ 0.335592] PCI: Using E820 reservations for host bridge windows252buildbot # [ 0.336603] ACPI: Enabled 2 GPEs in block 00 to 0F253buildbot # [ 0.345349] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])254buildbot # [ 0.345985] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]255buildbot # [ 0.346909] acpiphp: Slot [3] registered256buildbot # [ 0.347580] acpiphp: Slot [4] registered257buildbot # [ 0.348109] acpiphp: Slot [5] registered258buildbot # [ 0.348612] acpiphp: Slot [6] registered259buildbot # [ 0.349261] acpiphp: Slot [7] registered260buildbot # [ 0.349622] acpiphp: Slot [8] registered261buildbot # [ 0.350271] acpiphp: Slot [9] registered262buildbot # [ 0.350610] acpiphp: Slot [10] registered263buildbot # [ 0.351299] acpiphp: Slot [11] registered264buildbot # [ 0.351619] acpiphp: Slot [12] registered265buildbot # [ 0.352306] acpiphp: Slot [13] registered266buildbot # [ 0.352610] acpiphp: Slot [14] registered267buildbot # [ 0.353289] acpiphp: Slot [15] registered268buildbot # [ 0.353617] acpiphp: Slot [16] registered269buildbot # [ 0.354292] acpiphp: Slot [17] registered270buildbot # [ 0.354609] acpiphp: Slot [18] registered271buildbot # [ 0.355287] acpiphp: Slot [19] registered272buildbot # [ 0.355610] acpiphp: Slot [20] registered273buildbot # [ 0.356291] acpiphp: Slot [21] registered274buildbot # [ 0.356609] acpiphp: Slot [22] registered275buildbot # [ 0.357302] acpiphp: Slot [23] registered276buildbot # [ 0.357616] acpiphp: Slot [24] registered277buildbot # [ 0.358276] acpiphp: Slot [25] registered278buildbot # [ 0.358609] acpiphp: Slot [26] registered279buildbot # [ 0.359307] acpiphp: Slot [27] registered280buildbot # [ 0.359616] acpiphp: Slot [28] registered281buildbot # [ 0.360281] acpiphp: Slot [29] registered282buildbot # [ 0.360609] acpiphp: Slot [30] registered283buildbot # [ 0.361265] acpiphp: Slot [31] registered284buildbot # [ 0.361640] PCI host bridge to bus 0000:00285buildbot # [ 0.362324] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]286buildbot # [ 0.362592] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]287buildbot # [ 0.363591] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]288buildbot # [ 0.364591] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]289buildbot # [ 0.365591] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]290buildbot # [ 0.366591] pci_bus 0000:00: root bus resource [bus 00-ff]291buildbot # [ 0.367603] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint292buildbot # [ 0.369037] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint293buildbot # [ 0.370018] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint294buildbot # [ 0.371638] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef]295buildbot # [ 0.372476] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk296buildbot # [ 0.373403] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk297buildbot # [ 0.374325] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk298buildbot # [ 0.374591] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk299buildbot # [ 0.375737] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint300buildbot # [ 0.377640] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f]301buildbot # [ 0.379475] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint302buildbot # [ 0.380850] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI303buildbot # [ 0.381597] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB304buildbot # [ 0.382803] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint305buildbot # [ 0.385370] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]306buildbot # [ 0.385606] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]307buildbot # [ 0.386547] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]308buildbot # [ 0.387496] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]309buildbot # [ 0.389326] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint310buildbot # [ 0.392623] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f]311buildbot # [ 0.393441] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]312buildbot # [ 0.394601] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]313buildbot # [ 0.395598] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]314buildbot # [ 0.397894] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint315buildbot # [ 0.399598] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f]316buildbot # [ 0.400496] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]317buildbot # [ 0.401374] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]318buildbot # [ 0.404075] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint319buildbot # [ 0.405621] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf]320buildbot # [ 0.406403] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]321buildbot # [ 0.407271] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]322buildbot # [ 0.408845] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint323buildbot # [ 0.411598] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f]324buildbot # [ 0.412420] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]325buildbot # [ 0.413306] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]326buildbot # [ 0.414827] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint327buildbot # [ 0.416621] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f]328buildbot # [ 0.417462] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]329buildbot # [ 0.418308] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]330buildbot # [ 0.420723] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint331buildbot # [ 0.423625] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f]332buildbot # [ 0.424414] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]333buildbot # [ 0.425264] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]334buildbot # [ 0.426846] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint335buildbot # [ 0.429608] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf]336buildbot # [ 0.430617] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]337buildbot # [ 0.431535] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]338buildbot # [ 0.432399] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref]339buildbot # [ 0.434548] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint340buildbot # [ 0.436625] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]341buildbot # [ 0.437501] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]342buildbot # [ 0.439977] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint343buildbot # [ 0.441628] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff]344buildbot # [ 0.442444] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]345buildbot # [ 0.443321] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]346buildbot # [ 0.444778] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint347buildbot # [ 0.447501] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df]348buildbot # [ 0.448171] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff]349buildbot # [ 0.448612] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]350buildbot # [ 0.453212] ACPI: PCI: Interrupt link LNKA configured for IRQ 10351buildbot # [ 0.453728] ACPI: PCI: Interrupt link LNKB configured for IRQ 10352buildbot # [ 0.454717] ACPI: PCI: Interrupt link LNKC configured for IRQ 11353buildbot # [ 0.455710] ACPI: PCI: Interrupt link LNKD configured for IRQ 11354buildbot # [ 0.456657] ACPI: PCI: Interrupt link LNKS configured for IRQ 9355buildbot # [ 0.458680] iommu: Default domain type: Translated356buildbot # [ 0.459470] iommu: DMA domain TLB invalidation policy: lazy mode357buildbot # [ 0.460592] ACPI: bus type USB registered358buildbot # [ 0.461306] usbcore: registered new interface driver usbfs359buildbot # [ 0.461611] usbcore: registered new interface driver hub360buildbot # [ 0.462461] usbcore: registered new device driver usb361buildbot # [ 0.464288] NetLabel: Initializing362buildbot # [ 0.464592] NetLabel: domain hash size = 128363buildbot # [ 0.465276] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO364buildbot # [ 0.465665] NetLabel: unlabeled traffic allowed by default365buildbot # [ 0.466551] PCI: Using ACPI for IRQ routing366buildbot # [ 0.467484] pci 0000:00:02.0: vgaarb: setting as boot VGA device367buildbot # [ 0.467587] pci 0000:00:02.0: vgaarb: bridge control possible368buildbot # [ 0.467587] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none369buildbot # [ 0.467593] vgaarb: loaded370buildbot # [ 0.468341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0371buildbot # [ 0.468591] hpet0: 3 comparators, 64-bit 100.000000 MHz counter372buildbot # [ 0.471667] clocksource: Switched to clocksource kvm-clock373buildbot # [ 0.476252] VFS: Disk quotas dquot_6.6.0374buildbot # [ 0.476976] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)375buildbot # [ 0.478269] pnp: PnP ACPI init376buildbot # [ 0.479371] pnp: PnP ACPI: found 6 devices377buildbot # [ 0.486980] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns378buildbot # [ 0.488372] clocksource: Switched to clocksource acpi_pm379buildbot # [ 0.489301] NET: Registered PF_INET protocol family380buildbot # [ 0.490312] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)381buildbot # [ 0.507580] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)382buildbot # [ 0.509029] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)383buildbot # [ 0.510285] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)384buildbot # [ 0.511574] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)385buildbot # [ 0.512756] TCP: Hash tables configured (established 8192 bind 8192)386buildbot # [ 0.513814] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)387buildbot # [ 0.515041] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)388buildbot # [ 0.516121] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)389buildbot # [ 0.517299] NET: Registered PF_UNIX/PF_LOCAL protocol family390buildbot # [ 0.518216] NET: Registered PF_XDP protocol family391buildbot # [ 0.519016] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]392buildbot # [ 0.519995] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]393buildbot # [ 0.520975] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]394buildbot # [ 0.522056] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]395buildbot # [ 0.523117] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]396buildbot # [ 0.524268] pci 0000:00:01.0: PIIX3: Enabling Passive Release397buildbot # [ 0.525188] pci 0000:00:00.0: Limiting direct PCI/PCI transfers398buildbot # [ 0.527554] ACPI: \_SB_.LNKD: Enabled at IRQ 11399buildbot # [ 0.530596] PCI: CLS 0 bytes, default 64400buildbot # [ 0.531427] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns401buildbot # [ 0.533074] Trying to unpack rootfs image as initramfs...402buildbot # [ 0.574309] Initialise system trusted keyrings403buildbot # [ 0.577951] workingset: timestamp_bits=40 max_order=18 bucket_order=0404buildbot # [ 0.597157] Key type asymmetric registered405buildbot # [ 0.601898] Asymmetric key parser 'x509' registered406buildbot # [ 0.602709] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)407buildbot # [ 0.604104] io scheduler mq-deadline registered408buildbot # [ 0.606892] io scheduler kyber registered409buildbot # [ 0.608195] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled410buildbot # [ 0.609409] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A411buildbot # [ 0.615289] Linux agpgart interface v0.103412buildbot # [ 0.616058] ACPI: bus type drm_connector registered413buildbot # [ 0.619384] usbcore: registered new interface driver usbserial_generic414buildbot # [ 0.620344] usbserial: USB Serial support registered for generic415buildbot # [ 0.623908] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.416buildbot # [ 0.623908] Please enable it if your BIOS has the CPPC option.417buildbot # [ 0.625973] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled418buildbot # [ 0.630065] drop_monitor: Initializing network drop monitor service419buildbot # [ 0.631221] NET: Registered PF_INET6 protocol family420buildbot # [ 0.632502] Segment Routing with IPv6421buildbot # [ 0.635911] In-situ OAM (IOAM) with IPv6422buildbot # [ 0.636994] IPI shorthand broadcast: enabled423buildbot # [ 0.645309] sched_clock: Marking stable (518015228, 126866664)->(714041050, -69159158)424buildbot # [ 0.649982] registered taskstats version 1425buildbot # [ 0.650927] Loading compiled-in X.509 certificates426buildbot # [ 0.670019] Demotion targets for Node 0: null427buildbot # [ 0.670913] Key type .fscrypt registered428buildbot # [ 0.671585] Key type fscrypt-provisioning registered429buildbot # [ 0.672487] ima: No TPM chip found, activating TPM-bypass!430buildbot # [ 0.676917] ima: Allocated hash algorithm: sha1431buildbot # [ 0.677712] ima: No architecture policies found432buildbot # [ 0.679903] PM: Magic number: 6:393:966433buildbot # [ 0.681534] RAS: Correctable Errors collector initialized.434buildbot # [ 0.690564] clk: Disabling unused clocks435buildbot # [ 0.692903] PM: genpd: Disabling unused power domains436buildbot # [ 0.855888] Freeing initrd memory: 27736K437buildbot # [ 0.859153] Freeing unused decrypted memory: 2028K438buildbot # [ 0.861905] Freeing unused kernel image (initmem) memory: 3636K439buildbot # [ 0.862963] Write protecting the kernel read-only data: 32768k440buildbot # [ 0.864903] Freeing unused kernel image (text/rodata gap) memory: 1272K441buildbot # [ 0.866434] Freeing unused kernel image (rodata/data gap) memory: 776K442buildbot # [ 0.917514] x86/mm: Checked W+X mappings: passed, no W+X pages found.443buildbot # [ 0.918552] Run /init as init process444buildbot # [ 0.930018] systemd[1]: Inserted module 'autofs4'445buildbot # [ 0.945688] fuse: init (API version 7.45)446buildbot # [ 0.952374] ACPI: \_SB_.LNKC: Enabled at IRQ 10447buildbot # [ 0.958442] ACPI: \_SB_.LNKA: Enabled at IRQ 10448buildbot # [ 0.961441] ACPI: \_SB_.LNKB: Enabled at IRQ 11449buildbot # [ 0.990585] systemd[1]: Successfully made /usr/ read-only.450buildbot # [ 1.327569] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)451buildbot # [ 1.339056] systemd[1]: Detected virtualization kvm.452buildbot # [ 1.341050] systemd[1]: Detected architecture x86-64.453buildbot # [ 1.343075] systemd[1]: Running in initrd.454buildbot # [ 1.345625] systemd[1]: Initializing machine ID from random generator.455buildbot # [ 1.348398] systemd[1]: Hostname set to <buildbot>.456buildbot # [ 1.412473] systemd[1]: Queued start job for default target Initrd Default Target.457buildbot # [ 1.416157] systemd[1]: Created slice Slice /system/modprobe.458buildbot # [ 1.417258] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.459buildbot # [ 1.418626] systemd[1]: Expecting device /dev/disk/by-label/nixos...460buildbot # [ 1.419741] systemd[1]: Reached target Path Units.461buildbot # [ 1.420591] systemd[1]: Reached target Slice Units.462buildbot # [ 1.421438] systemd[1]: Reached target Swaps.463buildbot # [ 1.422193] systemd[1]: Reached target Timer Units.464buildbot # [ 1.423102] systemd[1]: Listening on D-Bus System Message Bus Socket.465buildbot # [ 1.424262] systemd[1]: Listening on Journal Socket (/dev/log).466buildbot # [ 1.425349] systemd[1]: Listening on Journal Sockets.467buildbot # [ 1.426336] systemd[1]: Listening on udev Control Socket.468buildbot # [ 1.427343] systemd[1]: Listening on udev Kernel Socket.469buildbot # [ 1.428244] systemd[1]: Reached target Socket Units.470buildbot # [ 1.429949] systemd[1]: Starting Create List of Static Device Nodes...471buildbot # [ 1.433693] systemd[1]: Starting Load Kernel Module 9pnet_virtio...472buildbot # [ 1.442231] systemd[1]: Starting Load Kernel Module configfs...473buildbot # [ 1.451994] systemd[1]: Starting Journal Service...474buildbot # [ 1.460951] systemd[1]: Starting Load Kernel Modules...475buildbot # [ 1.461836] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki476buildbot # [ 1.478968] systemd[1]: Starting Coldplug All udev Devices...477buildbot # [ 1.489462] netfs: FS-Cache loaded478buildbot # [ 1.494949] systemd[1]: Finished Create List of Static Device Nodes.479buildbot # [ 1.502447] systemd[1]: modprobe@configfs.service: Deactivated successfully.480buildbot # [ 1.511320] 9pnet: Installing 9P2000 support481buildbot # [ 1.512083] systemd[1]: Finished Load Kernel Module configfs.482buildbot # [ 1.517787] systemd-journald[67]: Collecting audit messages is disabled.483buildbot # [ 1.531075] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config484buildbot # [ 1.540217] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.485buildbot # [ 1.542261] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...486buildbot # [ 1.550149] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev487buildbot # [ 1.558195] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.488buildbot # [ 1.564121] systemd[1]: Finished Load Kernel Module 9pnet_virtio.489buildbot # [ 1.573844] systemd[1]: Finished Load Kernel Modules.490buildbot # [ 1.578979] systemd[1]: Starting Apply Kernel Variables...491buildbot # [ 1.590959] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.492buildbot # [ 1.600105] systemd[1]: Starting Create Static Device Nodes in /dev...493buildbot # [ 1.613987] systemd[1]: Finished Apply Kernel Variables.494buildbot # [ 1.634399] systemd[1]: Finished Create Static Device Nodes in /dev.495buildbot # [ 1.638068] systemd[1]: Reached target Preparation for Local File Systems.496buildbot # [ 1.641951] systemd[1]: Reached target Local File Systems.497buildbot # [ 1.648078] systemd[1]: Starting Rule-based Manager for Device Events and Files...498buildbot # [ 1.549595] systemd-modules-load[68]: Inserted module 'dm_mod'[ 1.677463] systemd[1]: Started Journal Service.499buildbot # 500buildbot # [ 1.553479] systemd-modules-load[68]: Inserted module 'virtio_balloon'501buildbot # [ 1.555280] systemd-modules-load[68]: Inserted module 'virtio_gpu'502buildbot # [ 1.561063] systemd[1]: Starting Create System Files and Directories...503buildbot # [ 1.581659] systemd-udevd[75]: Using default interface naming scheme 'v260'.504buildbot # [ 1.598148] systemd[1]: Finished Create System Files and Directories.505buildbot # [ 1.617061] systemd[1]: Started Rule-based Manager for Device Events and Files.506buildbot # [ 1.695154] systemd[1]: Finished Coldplug All udev Devices.507buildbot # [ 1.697173] systemd[1]: Reached target System Initialization.508buildbot # [ 1.697905] systemd[1]: Reached target Basic System.509buildbot # [ 1.991762] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12510buildbot # [ 2.023166] serio: i8042 KBD port at 0x60,0x64 irq 1511buildbot # [ 2.023857] serio: i8042 AUX port at 0x60,0x64 irq 12512buildbot # [ 2.033503] uhci_hcd 0000:00:01.2: UHCI Host Controller513buildbot # [ 2.045914] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1514buildbot # [ 2.054855] uhci_hcd 0000:00:01.2: detected 2 ports515buildbot # [ 2.056375] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100516buildbot # [ 2.063242] virtio_blk virtio5: 1/0/0 default/read/poll queues517buildbot # [ 2.064736] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)518buildbot # [ 2.071186] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18519buildbot # [ 2.072220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1520buildbot # [ 2.074042] SCSI subsystem initialized521buildbot # [ 2.087144] usb usb1: Product: UHCI Host Controller522buildbot # [ 2.087793] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd523buildbot # [ 2.093898] usb usb1: SerialNumber: 0000:00:01.2524buildbot # [ 2.103527] hub 1-0:1.0: USB hub found525buildbot # [ 2.104094] hub 1-0:1.0: 2 ports detected526buildbot # [ 2.125349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0527buildbot # [ 2.001076] systemd[1]: Starting Virtual Console Setup...528buildbot # [ 2.011247] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line.529buildbot # [ 2.014605] (udev-worker)[95]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.530buildbot # [ 2.025044] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line.531buildbot # [ 2.036286] systemd-vconsole-setup[100]: Configuration of first virtual console was skipped, ignoring remaining ones.532buildbot # [ 2.039691] systemd[1]: Finished Virtual Console Setup.533buildbot # [ 2.069063] systemd[1]: Found device /dev/disk/by-label/nixos.534buildbot # [ 2.069855] systemd[1]: Reached target Initrd Root Device.535buildbot # [ 2.074067] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...536buildbot # [ 2.215238] scsi host0: ata_piix537buildbot # [ 2.218046] scsi host1: ata_piix538buildbot # [ 2.218630] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0539buildbot # [ 2.221540] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0540buildbot # [ 2.102876] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks541buildbot # [ 2.108559] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.542buildbot # [ 2.335975] usb 1-1: new full-speed USB device number 2 using uhci_hcd543buildbot # [ 2.376581] ata2: found unknown device (class 0)544buildbot # [ 2.379299] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100545buildbot # [ 2.384213] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5546buildbot # [ 2.429296] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray547buildbot # [ 2.438108] cdrom: Uniform CD-ROM driver Revision: 3.20548buildbot # [ 2.363166] systemd[1]: Mounting /sysroot...549buildbot # [ 2.503063] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00550buildbot # [ 2.504145] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10551buildbot # [ 2.508881] usb 1-1: Product: QEMU USB Tablet552buildbot # [ 2.509487] usb 1-1: Manufacturer: QEMU553buildbot # [ 2.510192] usb 1-1: SerialNumber: 28754-0000:00:01.2-1554buildbot # [ 2.549314] hid: raw HID events driver (C) Jiri Kosina555buildbot # [ 2.569818] usbcore: registered new interface driver usbhid556buildbot # [ 2.571386] usbhid: USB HID core driver557buildbot # [ 2.583150] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2558buildbot # [ 2.584817] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0559buildbot # [ 2.619799] EXT4-fs (vda): mounted filesystem 77952788-d205-4e96-8b24-cc05924efded r/w with ordered data mode. Quota mode: none.560buildbot # [ 2.496249] systemd[1]: Mounted /sysroot.561buildbot # [ 2.497488] systemd[1]: Reached target Initrd Root File System.562buildbot # [ 2.500082] systemd[1]: Mounting /sysroot/nix/.ro-store...563buildbot # [ 2.502618] systemd[1]: Mounting /sysroot/nix/.rw-store...564buildbot # [ 2.507779] systemd[1]: Mounting /sysroot/run...565buildbot # [ 2.509125] systemd[1]: Mounting /sysroot/tmp/shared...566buildbot # [ 2.520310] systemd[1]: Mounting /sysroot/tmp/xchg...567buildbot # [ 2.521885] systemd[1]: Starting Mountpoints Configured in the Real Root...568buildbot # [ 2.665488] 9p: Installing v9fs 9p2000 file system support569buildbot # [ 2.544682] systemd[1]: Mounted /sysroot/nix/.rw-store.570buildbot # [ 2.546569] systemd[1]: Mounted /sysroot/run.571buildbot # [ 2.550778] systemd[1]: Mounted /sysroot/nix/.ro-store.572buildbot # [ 2.557991] systemd-sysroot-fstab-check[132]: /sysroot should be mounted in the initrd, will request daemon-reload.573buildbot # [ 2.562119] systemd[1]: Mounted /sysroot/tmp/shared.574buildbot # [ 2.565568] systemd[1]: Mounted /sysroot/tmp/xchg.575buildbot # [ 2.568066] systemd[1]: Reload requested from client PID 132 ('systemd-sysroot') (unit initrd-parse-etc.service)...576buildbot # [ 2.569409] systemd[1]: Reloading...577buildbot # [ 2.635795] systemd[1]: Reloading finished in 67 ms.578buildbot # [ 2.642440] systemd-sysroot-fstab-check[132]: Requesting initrd-fs.target/start/replace...579buildbot # [ 2.645121] systemd-sysroot-fstab-check[132]: Requesting swap.target/start/replace...580buildbot # [ 2.646669] systemd[1]: Starting rw-sysroot-nix-store.service...581buildbot # [ 2.649711] systemd[1]: initrd-parse-etc.service: Deactivated successfully.582buildbot # [ 2.652125] systemd[1]: Finished Mountpoints Configured in the Real Root.583buildbot # [ 2.653124] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.584buildbot # [ 2.662359] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.585buildbot # [ 2.663715] systemd[1]: Finished rw-sysroot-nix-store.service.586buildbot # [ 3.364942] systemd[1]: Mounting /sysroot/nix/store...587buildbot # [ 3.409252] systemd[1]: Mounted /sysroot/nix/store.588buildbot # [ 3.413102] systemd[1]: Reached target Initrd File Systems.589buildbot # [ 3.415129] systemd[1]: Starting Find NixOS closure...590buildbot # [ 3.420068] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...591buildbot # [ 3.443391] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.592buildbot # [ 3.446059] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.593buildbot # [ 3.452732] systemd[1]: Finished Find NixOS closure.594buildbot # [ 3.453925] systemd[1]: Reached target Initrd Default Target.595buildbot # [ 3.455760] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...596buildbot # [ 3.468940] systemd[1]: Stopped target Initrd Default Target.597buildbot # [ 3.470163] systemd[1]: Stopped target Basic System.598buildbot # [ 3.471047] systemd[1]: Stopped target Initrd Root Device.599buildbot # [ 3.471866] systemd[1]: Stopped target Path Units.600buildbot # [ 3.473100] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.601buildbot # [ 3.474038] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.602buildbot # [ 3.475085] systemd[1]: Stopped target Slice Units.603buildbot # [ 3.476064] systemd[1]: Stopped target Socket Units.604buildbot # [ 3.477113] systemd[1]: Stopped target System Initialization.605buildbot # [ 3.477924] systemd[1]: Stopped target Swaps.606buildbot # [ 3.478576] systemd[1]: Stopped target Timer Units.607buildbot # [ 3.479417] systemd[1]: dbus.socket: Deactivated successfully.608buildbot # [ 3.480418] systemd[1]: Closed D-Bus System Message Bus Socket.609buildbot # [ 3.482109] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.610buildbot # [ 3.483066] systemd[1]: Stopped Find NixOS closure.611buildbot # [ 3.483682] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio612buildbot # [ 3.485314] systemd[1]: Starting rw-sysroot-nix-store.service...613buildbot # [ 3.487132] systemd[1]: systemd-sysctl.service: Deactivated successfully.614buildbot # [ 3.488110] systemd[1]: Stopped Apply Kernel Variables.615buildbot # [ 3.489095] systemd[1]: systemd-modules-load.service: Deactivated successfully.616buildbot # [ 3.490792] systemd[1]: Stopped Load Kernel Modules.617buildbot # [ 3.491480] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.618buildbot # [ 3.492413] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.619buildbot # [ 3.493498] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.620buildbot # [ 3.494920] systemd[1]: Stopped Create System Files and Directories.621buildbot # [ 3.495748] systemd[1]: Stopped target Local File Systems.622buildbot # [ 3.496938] systemd[1]: Stopped target Preparation for Local File Systems.623buildbot # [ 3.499148] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.624buildbot # [ 3.500856] systemd[1]: Stopped Coldplug All udev Devices.625buildbot # [ 3.501875] systemd[1]: Stopping Rule-based Manager for Device Events and Files...626buildbot # [ 3.502806] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.627buildbot # [ 3.503721] systemd[1]: Stopped Virtual Console Setup.628buildbot # [ 3.511876] systemd[1]: systemd-udevd.service: Deactivated successfully.629buildbot # [ 3.515072] systemd[1]: Stopped Rule-based Manager for Device Events and Files.630buildbot # [ 3.517324] systemd[1]: initrd-cleanup.service: Deactivated successfully.631buildbot # [ 3.519161] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.632buildbot # [ 3.522533] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.633buildbot # [ 3.524083] systemd[1]: Finished rw-sysroot-nix-store.service.634buildbot # [ 3.526147] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.635buildbot # [ 3.527082] systemd[1]: Closed udev Control Socket.636buildbot # [ 3.528159] systemd[1]: Starting Cleanup udev Database...637buildbot # [ 3.529113] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.638buildbot # [ 3.530120] systemd[1]: Stopped Create Static Device Nodes in /dev.639buildbot # [ 3.531133] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.640buildbot # [ 3.533123] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.641buildbot # [ 3.533963] systemd[1]: kmod-static-nodes.service: Deactivated successfully.642buildbot # [ 3.534815] systemd[1]: Stopped Create List of Static Device Nodes.643buildbot # [ 3.548906] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.644buildbot # [ 3.550066] systemd[1]: Finished Cleanup udev Database.645buildbot # [ 3.551972] systemd[1]: Reached target Switch Root.646buildbot # [ 3.553036] systemd[1]: Starting NixOS Activation...647buildbot # [ 3.721757] initrd-nixos-activation-start[176]: booting system configuration /nix/store/rf1dkf6byz0zcdzgxvxv1frdwih6cwgd-nixos-system-buildbot-test648buildbot # [ 3.786963] initrd-nixos-activation-start[176]: running activation script...649buildbot # [ 4.219537] initrd-nixos-activation-start[199]: setting up /etc...650buildbot # [ 4.487605] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.651buildbot # [ 4.489974] systemd[1]: Finished NixOS Activation.652buildbot # [ 4.490895] systemd[1]: Starting Switch Root...653buildbot # [ 4.504679] systemd[1]: Switching root.654buildbot # [ 4.650219] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).655buildbot # [ 4.809704] NET: Registered PF_VSOCK protocol family656buildbot # [ 5.198357] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)657buildbot # [ 5.207381] systemd[1]: Detected virtualization kvm.658buildbot # [ 5.209134] systemd[1]: Detected architecture x86-64.659buildbot # [ 5.210927] systemd[1]: Detected first boot.660buildbot # [ 5.219411] systemd[1]: Initializing machine ID from random generator.661buildbot # [ 5.480435] systemd[1]: bpf-restrict-fs: LSM BPF program attached662buildbot # [ 5.609949] systemd[1]: Applying preset policy.663buildbot # [ 6.181746] systemd[1]: Populated /etc with preset unit settings.664buildbot # [ 6.851358] systemd[1]: initrd-switch-root.service: Deactivated successfully.665buildbot # [ 6.852653] systemd[1]: Stopped initrd-switch-root.service.666buildbot # [ 6.855958] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.667buildbot # [ 6.857927] systemd[1]: Created slice Slice /system/getty.668buildbot # [ 6.859169] systemd[1]: Created slice User and Session Slice.669buildbot # [ 6.860016] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.670buildbot # [ 6.861169] systemd[1]: Started Forward Password Requests to Wall Directory Watch.671buildbot # [ 6.862180] systemd[1]: Expecting device /dev/hvc0...672buildbot # [ 6.862818] systemd[1]: Expecting device /dev/ttyS0...673buildbot # [ 6.863549] systemd[1]: Reached target Local Encrypted Volumes.674buildbot # [ 6.864324] systemd[1]: Stopped target initrd-fs.target.675buildbot # [ 6.865014] systemd[1]: Stopped target initrd-root-fs.target.676buildbot # [ 6.865734] systemd[1]: Stopped target initrd-switch-root.target.677buildbot # [ 6.866548] systemd[1]: Reached target Virtual Machines and Containers.678buildbot # [ 6.867399] systemd[1]: Reached target Path Units.679buildbot # [ 6.868049] systemd[1]: Reached target Remote File Systems.680buildbot # [ 6.868797] systemd[1]: Reached target Slice Units.681buildbot # [ 6.869476] systemd[1]: Reached target Swaps.682buildbot # [ 6.873100] systemd[1]: Listening on Query the User Interactively for a Password.683buildbot # [ 6.877450] systemd[1]: Listening on Process Core Dump Socket.684buildbot # [ 6.880789] systemd[1]: Listening on Credential Encryption/Decryption.685buildbot # [ 6.883967] systemd[1]: Listening on Factory Reset Management.686buildbot # [ 6.888333] systemd[1]: Starting Journal Log Access Socket...687buildbot # [ 6.889777] systemd[1]: Listening on Journal Audit Socket.688buildbot # [ 6.893102] systemd[1]: Listening on Console Output Muting Service Socket.689buildbot # [ 6.894208] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.690buildbot # [ 6.895267] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki691buildbot # [ 6.896584] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki692buildbot # [ 6.909154] systemd[1]: Listening on Disk Repartitioning Service Socket.693buildbot # [ 6.910110] systemd[1]: Listening on udev Control Socket.694buildbot # [ 6.910946] systemd[1]: Listening on udev Varlink Socket.695buildbot # [ 6.916217] systemd[1]: Mounting Huge Pages File System...696buildbot # [ 6.919649] systemd[1]: Mounting POSIX Message Queue File System...697buildbot # [ 6.923195] systemd[1]: Mounting Kernel Debug File System...698buildbot # [ 6.929619] systemd[1]: Mounting Kernel Trace File System...699buildbot # [ 6.938412] systemd[1]: Starting Create List of Static Device Nodes...700buildbot # [ 6.939780] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio701buildbot # [ 6.945274] systemd[1]: Starting Load Kernel Module configfs...702buildbot # [ 6.948169] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm703buildbot # [ 6.952230] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore704buildbot # [ 6.953983] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse705buildbot # [ 6.964348] systemd[1]: Mounting FUSE Control File System...706buildbot # [ 6.965538] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67707buildbot # [ 6.972813] systemd[1]: Starting Journal Service...708buildbot # [ 6.999963] systemd[1]: Starting Load Kernel Modules...709buildbot # [ 7.026278] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...710buildbot # [ 7.045387] systemd[1]: Starting Remount Root and Kernel File Systems...711buildbot # [ 7.051016] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki712buildbot # [ 7.067687] systemd[1]: Starting Coldplug All udev Devices...713buildbot # [ 7.083425] systemd[1]: Listening on Journal Log Access Socket.714buildbot # [ 7.089281] systemd[1]: Mounted Huge Pages File System.715buildbot # [ 7.098001] systemd[1]: Mounted POSIX Message Queue File System.716buildbot # [ 7.102029] systemd[1]: Mounted Kernel Debug File System.717buildbot # [ 7.106056] systemd[1]: Mounted Kernel Trace File System.718buildbot # [ 7.109211] loop: module loaded719buildbot # [ 7.111712] systemd[1]: Finished Create List of Static Device Nodes.720buildbot # [ 7.114799] systemd-journald[268]: Collecting audit messages is enabled.721buildbot # [ 7.116696] systemd[1]: modprobe@configfs.service: Deactivated successfully.722buildbot # [ 7.123897] EXT4-fs (vda): re-mounted 77952788-d205-4e96-8b24-cc05924efded.723buildbot # [ 7.125583] systemd[1]: Finished Load Kernel Module configfs.724buildbot # [ 7.130444] systemd[1]: Mounted FUSE Control File System.725buildbot # [ 7.145010] systemd[1]: Mounting Kernel Configuration File System...726buildbot # [ 7.025844] systemd[1]: Queued start job for default target Multi-User System.727buildbot # [ 7.027230] systemd[1]: systemd-journald.service: Deactivated successfully.728buildbot # [ 7.155733] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...729buildbot # [ 7.030899] systemd-modules-load[269]: Inserted module 'loop'730buildbot # [ 7.033781] systemd-modules-load[269]: Inserted module 'tls'731buildbot # [ 7.166519] systemd[1]: Started Journal Service.732buildbot # [ 7.054137] systemd[1]: Finished Load Kernel Modules.733buildbot # [ 7.057302] systemd[1]: Finished Remount Root and Kernel File Systems.734buildbot # [ 7.072821] systemd-oomd[270]: No swap; memory pressure usage will be degraded735buildbot # [ 7.084230] systemd[1]: Listening on Disk Image Download Service Socket.736buildbot # [ 7.091849] systemd[1]: Starting Flush Journal to Persistent Storage...737buildbot # [ 7.093506] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore738buildbot # [ 7.100897] systemd[1]: Starting Load/Save OS Random Seed...739buildbot # [ 7.107939] systemd[1]: Starting Apply Kernel Variables...740buildbot # [ 7.109430] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki741buildbot # [ 7.111891] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.742buildbot # [ 7.136200] systemd[1]: Mounted Kernel Configuration File System.743buildbot # [ 7.289301] systemd-journald[268]: Received client request to flush runtime journal.744buildbot # [ 7.269326] systemd[1]: Finished Load/Save OS Random Seed.745buildbot # [ 7.273234] systemd[1]: Reached target First Boot Complete.746buildbot # [ 7.274153] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.747buildbot # [ 7.275094] systemd[1]: Starting Create Static Device Nodes in /dev...748buildbot # [ 7.276197] systemd[1]: Finished Apply Kernel Variables.749buildbot # [ 7.278994] systemd[1]: Finished Flush Journal to Persistent Storage.750buildbot # [ 7.322699] systemd[1]: Finished Create Static Device Nodes in /dev.751buildbot # [ 7.324275] systemd[1]: Reached target Preparation for Local File Systems.752buildbot # [ 7.330077] systemd[1]: Starting Rule-based Manager for Device Events and Files...753buildbot # [ 7.371301] systemd[1]: Finished Coldplug All udev Devices.754buildbot # [ 7.424056] systemd-udevd[299]: Using default interface naming scheme 'v260'.755buildbot # [ 7.567916] systemd[1]: Started Rule-based Manager for Device Events and Files.756buildbot # [ 7.654619] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse757buildbot # [ 7.699941] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.758buildbot # [ 7.716608] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.759buildbot # [ 7.729396] systemd[1]: Mounting /run/wrappers...760buildbot # [ 7.762844] (udev-worker)[311]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.761buildbot # [ 7.769460] (udev-worker)[303]: Network interface NamePolicy= disabled on kernel command line.762buildbot # [ 7.770660] (udev-worker)[311]: Network interface NamePolicy= disabled on kernel command line.763buildbot # [ 7.773948] systemd[1]: Mounted /run/wrappers.764buildbot # [ 7.774688] systemd[1]: Reached target Local File Systems.765buildbot # [ 7.778155] systemd[1]: Listening on Boot Loader Control Service Socket.766buildbot # [ 7.782185] systemd[1]: Starting register-nix-paths.service...767buildbot # [ 7.786515] systemd[1]: Starting Create SUID/SGID Wrappers...768buildbot # [ 7.788154] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.769buildbot # [ 7.795083] systemd[1]: Starting Save Transient machine-id to Disk...770buildbot # [ 7.803673] systemd[1]: Starting Create System Files and Directories...771buildbot # [ 7.893229] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.772buildbot # [ 7.901570] systemd[1]: Finished Save Transient machine-id to Disk.773buildbot # [ 7.965116] systemd[1]: Finished Create System Files and Directories.774buildbot # [ 7.974416] systemd[1]: Starting Rebuild Journal Catalog...775buildbot # [ 7.978111] systemd[1]: Starting Record System Boot/Shutdown in UTMP...776buildbot # [ 7.999226] systemd[1]: Condition check resulted in Virtio network device being skipped.777buildbot # [ 8.002831] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore778buildbot # [ 8.004265] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.779buildbot # [ 8.006150] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67780buildbot # [ 8.008974] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore781buildbot # [ 8.011864] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki782buildbot # [ 8.012983] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki783buildbot # [ 8.062170] systemd[1]: Finished Record System Boot/Shutdown in UTMP.784buildbot # [ 8.108072] systemd[1]: Finished Rebuild Journal Catalog.785buildbot # [ 8.114303] systemd[1]: Starting Update is Completed...786buildbot # [ 8.285351] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3787buildbot # [ 8.170662] systemd[1]: Finished Update is Completed.788buildbot # [ 8.320988] ACPI: button: Power Button [PWRF]789buildbot # [ 8.333945] mousedev: PS/2 mouse device common for all mice790buildbot # [ 8.339560] rtc_cmos 00:05: RTC can wake from S4791buildbot # [ 8.374723] rtc_cmos 00:05: registered as rtc0792buildbot # [ 8.379721] rtc_cmos 00:05: setting system clock to 2026-08-23T02:58:59 UTC (1787453939)793buildbot # [ 8.394635] Floppy drive(s): fd0 is 2.88M AMI BIOS794buildbot # [ 8.406448] FDC 0 is a S82078B795buildbot # [ 8.426341] systemd-journald[268]: Time jumped backwards, rotating.796buildbot # [ 8.494706] parport_pc 00:03: reported by Plug and Play ACPI797buildbot # [ 8.508552] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs798buildbot # [ 8.512326] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]799buildbot # [ 8.516780] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console800buildbot # [ 8.496103] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.801buildbot # [ 8.498608] systemd[1]: Finished Create SUID/SGID Wrappers.802buildbot # [ 8.559520] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0803buildbot # [ 8.559596] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD804buildbot # [ 8.592190] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4805buildbot # [ 8.628188] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6806buildbot # [ 8.628440] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5807buildbot # [ 8.632399] Console: switching to colour dummy device 80x25808buildbot # [ 8.667489] [drm] Found bochs VGA, ID 0xb0c5.809buildbot # [ 8.667500] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.810buildbot # [ 8.679825] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic811buildbot # [ 8.680518] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0812buildbot # [ 8.613988] systemd[1]: Starting Virtual Console Setup...813buildbot # [ 8.727719] fbcon: bochs-drmdrmfb (fb0) is primary device814buildbot # [ 8.815010] Console: switching to colour frame buffer device 160x50815buildbot # [ 8.820991] ppdev: user-space parallel port driver816buildbot # [ 8.841117] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device817buildbot # [ 8.780070] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.818buildbot # [ 8.782153] systemd[1]: Stopped Virtual Console Setup.819buildbot # [ 8.801564] systemd[1]: Starting Virtual Console Setup...820buildbot # [ 8.830064] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.821buildbot # [ 8.831110] systemd[1]: Stopped Virtual Console Setup.822buildbot # [ 8.838167] systemd[1]: Starting Virtual Console Setup...823buildbot # [ 9.045584] kvm_amd: TSC scaling supported824buildbot # [ 9.046112] kvm_amd: Nested Virtualization enabled825buildbot # [ 9.046698] kvm_amd: Nested Paging enabled826buildbot # [ 9.047487] kvm_amd: LBR virtualization supported827buildbot # [ 9.048137] kvm_amd: Virtual VMLOAD VMSAVE supported828buildbot # [ 9.048732] kvm_amd: Virtual GIF supported829buildbot # [ 9.049735] kvm_amd: Virtual NMI enabled830buildbot # [ 8.927484] systemd[1]: Finished register-nix-paths.service.831buildbot # [ 9.098302] EDAC MC: Ver: 3.0.0832buildbot # [ 9.479037] systemd-vconsole-setup[400]: Configuration of first virtual console was skipped, ignoring remaining ones.833buildbot # [ 9.484224] systemd[1]: Finished Virtual Console Setup.834buildbot # [ 9.484918] systemd[1]: Reached target System Initialization.835buildbot # [ 9.486966] systemd[1]: Started Discard unused filesystem blocks once a week.836buildbot # [ 9.487890] systemd[1]: Started Daily Cleanup of Temporary Directories.837buildbot # [ 9.489212] systemd[1]: Reached target Timer Units.838buildbot # [ 9.489874] systemd[1]: Listening on D-Bus System Message Bus Socket.839buildbot # [ 9.490861] systemd[1]: Listening on Nix Daemon Socket.840buildbot # [ 9.494078] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).841buildbot # [ 9.495136] systemd[1]: Listening on Hostname Service Socket.842buildbot # [ 9.495841] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.843buildbot # [ 9.496846] systemd[1]: Reached target Socket Units.844buildbot # [ 9.497478] systemd[1]: Reached target Basic System.845buildbot # [ 9.500656] systemd[1]: Started backdoor.service.846buildbot # [ 9.503924] systemd[1]: Starting Import lastlog data into lastlog2 database...847buildbot # [ 9.507556] systemd[1]: Starting Name Service Cache Daemon (nsncd)...848buildbot # [ 9.511917] systemd[1]: Starting Post-Boot Actions...849buildbot # [ 9.518937] systemd[1]: Started Reset console on configuration changes.850buildbot # [ 9.524208] systemd[1]: Starting resolvconf update...851buildbot # [ 9.525293] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.852buildbot # [ 9.550699] systemd[1]: Starting D-Bus System Message Bus...853buildbot # [ 9.588492] systemd[1]: Finished Post-Boot Actions.854buildbot # connecting to host...855buildbot # [ 9.621057] systemd[1]: Started Name Service Cache Daemon (nsncd).856buildbot # [ 9.622511] systemd[1]: Reached target Host and Network Name Lookups.857buildbot # [ 9.625259] systemd[1]: Reached target User and Group Name Lookups.858buildbot # [ 9.628145] nsncd[407]: Aug 23 02:59:00.866 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"859buildbot # [ 9.637754] systemd[1]: Starting User Login Management...860buildbot: Guest shell says: b'Spawning backdoor root shell...\n'861buildbot: connected to guest root shell862buildbot # [ 9.649866] systemd[1]: Finished Import lastlog data into lastlog2 database.863buildbot: (connecting took 10.33 seconds)864buildbot: (finished: waiting for the VM to finish booting, in 10.59 seconds)865buildbot # [ 9.724338] dbus-broker-launch[412]: Looking up NSS user entry for 'systemd-timesync'...866buildbot # [ 9.748437] systemd-logind[432]: New seat seat0.867buildbot # [ 9.752454] systemd-logind[432]: Watching system buttons on /dev/input/event2 (Power Button)868buildbot # [ 9.753771] systemd-logind[432]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)869buildbot # [ 9.755181] systemd-logind[432]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)870buildbot # [ 9.780077] systemd[1]: Started User Login Management.871buildbot # [ 9.787953] systemd[1]: Stopped target Host and Network Name Lookups.872buildbot # [ 9.788882] systemd[1]: Stopping Host and Network Name Lookups...873buildbot # [ 9.789601] systemd[1]: Stopped target User and Group Name Lookups.874buildbot # [ 9.790364] systemd[1]: Stopping User and Group Name Lookups...875buildbot # [ 9.791470] dbus-broker-launch[412]: NSS returned no entry for 'systemd-timesync'876buildbot # [ 9.792789] dbus-broker-launch[412]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"877buildbot # [ 9.798773] systemd[1]: Starting linger-users.service...878buildbot # [ 9.799781] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...879buildbot # [ 9.804294] systemd[1]: nscd.service: Deactivated successfully.880buildbot # [ 9.807130] systemd[1]: Stopped Name Service Cache Daemon (nsncd).881buildbot # [ 9.823666] systemd[1]: Starting Name Service Cache Daemon (nsncd)...882buildbot # [ 9.842183] systemd[1]: Started D-Bus System Message Bus.883buildbot # [ 9.879772] dbus-broker-launch[412]: Ready884buildbot # [ 9.884226] systemd[1]: linger-users.service: Deactivated successfully.885buildbot # [ 9.885605] systemd[1]: Finished linger-users.service.886buildbot # [ 9.888741] systemd[1]: Started Name Service Cache Daemon (nsncd).887buildbot # [ 9.891171] nsncd[485]: Aug 23 02:59:01.135 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"888buildbot # [ 9.896266] systemd[1]: Reached target Host and Network Name Lookups.889buildbot # [ 9.897485] systemd[1]: Reached target User and Group Name Lookups.890buildbot # [ 9.909537] systemd[1]: Finished resolvconf update.891buildbot # [ 9.910961] systemd[1]: Reached target Preparation for Network.892buildbot # [ 9.915553] systemd[1]: Starting DHCP Client...893buildbot # [ 9.918757] systemd[1]: Starting Address configuration of eth1...894buildbot # [ 9.922146] systemd[1]: Starting Extra networking commands....895buildbot # [ 10.049616] network-addresses-eth1-start[511]: adding address 192.168.1.1/24... done896buildbot # [ 10.066958] network-addresses-eth1-start[511]: adding address 2001:db8:1::1/64... done897buildbot # [ 10.080985] dhcpcd[518]: dhcpcd-10.3.2 starting898buildbot # [ 10.087357] systemd[1]: Finished Address configuration of eth1.899buildbot # [ 10.095976] dhcpcd[561]: dev: loaded udev900buildbot # [ 10.113837] systemd[1]: Finished Extra networking commands..901buildbot # [ 10.116149] systemd[1]: Reached target Network.902buildbot # [ 10.119866] systemd[1]: Starting Nginx Web Server...903buildbot # [ 10.123870] systemd[1]: Starting PostgreSQL Server...904buildbot # [ 10.128106] systemd[1]: Starting SSH Daemon...905buildbot # [ 10.259375] 8021q: 802.1Q VLAN Support v1.8906buildbot # [ 10.259779] 8021q: adding VLAN 0 to HW filter on device eth1907buildbot # [ 10.136228] systemd[1]: Starting Permit User Sessions...908buildbot # [ 10.187270] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.909buildbot # [ 10.224295] systemd[1]: Finished Permit User Sessions.910buildbot # [ 10.234535] systemd[1]: Started Getty on tty1.911buildbot # [ 10.236703] systemd[1]: Reached target Login Prompts.912buildbot # [ 10.277940] sshd[573]: Server listening on 0.0.0.0 port 22.913buildbot # [ 10.279206] sshd[573]: Server listening on :: port 22.914buildbot # [ 10.279956] systemd[1]: Started SSH Daemon.915buildbot # [ 10.288557] systemd[1]: Starting Setup git test repository with scheduled effects...916buildbot # [ 10.447940] cfg80211: Loading compiled-in X.509 certificates for regulatory database917buildbot # [ 10.484873] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'918buildbot # [ 10.485538] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'919buildbot # [ 10.489906] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2920buildbot # [ 10.490694] cfg80211: failed to load regulatory.db921buildbot # [ 10.559275] 8021q: adding VLAN 0 to HW filter on device eth0922buildbot # [ 10.433541] dhcpcd[561]: eth0: waiting for carrier923buildbot # [ 10.434632] setup-git-repo-start[595]: hint: Using 'master' as the name for the initial branch. This default branch name924buildbot # [ 10.436058] setup-git-repo-start[595]: hint: will change to "main" in Git 3.0. To configure the initial branch name925buildbot # [ 10.437615] setup-git-repo-start[595]: hint: to use in all of your new repositories, which will suppress this warning,926buildbot # [ 10.438859] setup-git-repo-start[595]: hint: call:927buildbot # [ 10.440139] setup-git-repo-start[595]: hint:928buildbot # [ 10.441136] setup-git-repo-start[595]: hint: git config --global init.defaultBranch <name>929buildbot # [ 10.442199] setup-git-repo-start[595]: hint:930buildbot # [ 10.443752] setup-git-repo-start[595]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and931buildbot # [ 10.445072] setup-git-repo-start[595]: hint: 'development'. The just-created branch can be renamed via this command:932buildbot # [ 10.446446] setup-git-repo-start[595]: hint:933buildbot # [ 10.447163] setup-git-repo-start[595]: hint: git branch -m <name>934buildbot # [ 10.448893] setup-git-repo-start[595]: hint:935buildbot # [ 10.449798] setup-git-repo-start[595]: hint: Disable this message with "git config set advice.defaultBranchName false"936buildbot # [ 10.451244] setup-git-repo-start[595]: Initialized empty Git repository in /srv/repos/test-flake.git/937buildbot # [ 10.453363] dhcpcd[561]: eth0: carrier acquired938buildbot # [ 10.462971] dhcpcd[561]: DUID 00:01:00:01:32:1d:1e:75:52:54:00:12:34:56939buildbot # [ 10.463918] dhcpcd[561]: eth0: IAID 00:12:34:56940buildbot # [ 10.464990] dhcpcd[561]: eth0: adding address fe80::5054:ff:fe12:3456941buildbot # [ 10.474284] dhcpcd[561]: eth0: soliciting a DHCP lease942buildbot # [ 10.487204] postgresql-pre-start[588]: The files belonging to this database system will be owned by user "postgres".943buildbot # [ 10.488824] postgresql-pre-start[588]: This user must also own the server process.944buildbot # [ 10.627807] NET: Registered PF_PACKET protocol family945buildbot # [ 10.502908] postgresql-pre-start[588]: The database cluster will be initialized with locale "en_US.UTF-8".946buildbot # [ 10.505075] postgresql-pre-start[588]: The default database encoding has accordingly been set to "UTF8".947buildbot # [ 10.506605] postgresql-pre-start[588]: The default text search configuration will be set to "english".948buildbot # [ 10.508095] postgresql-pre-start[588]: Data page checksums are disabled.949buildbot # [ 10.509518] postgresql-pre-start[588]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok950buildbot # [ 10.510965] postgresql-pre-start[588]: creating subdirectories ... ok951buildbot # [ 10.511966] postgresql-pre-start[588]: selecting dynamic shared memory implementation ... posix952buildbot # [ 10.513556] dhcpcd[561]: eth0: offered 10.0.2.15 from 10.0.2.2953buildbot # [ 10.514704] dhcpcd[561]: eth0: probing address 10.0.2.15/24954buildbot # [ 10.530769] nginx-pre-start[584]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok955buildbot # [ 10.532605] setup-git-repo-start[607]: hint: Using 'master' as the name for the initial branch. This default branch name956buildbot # [ 10.534334] setup-git-repo-start[607]: hint: will change to "main" in Git 3.0. To configure the initial branch name957buildbot # [ 10.535897] setup-git-repo-start[607]: hint: to use in all of your new repositories, which will suppress this warning,958buildbot # [ 10.538675] setup-git-repo-start[607]: hint: call:959buildbot # [ 10.539603] setup-git-repo-start[607]: hint:960buildbot # [ 10.540515] setup-git-repo-start[607]: hint: git config --global init.defaultBranch <name>961buildbot # [ 10.542121] setup-git-repo-start[607]: hint:962buildbot # [ 10.542707] setup-git-repo-start[607]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and963buildbot # [ 10.544248] setup-git-repo-start[607]: hint: 'development'. The just-created branch can be renamed via this command:964buildbot # [ 10.545666] setup-git-repo-start[607]: hint:965buildbot # [ 10.546506] setup-git-repo-start[607]: hint: git branch -m <name>966buildbot # [ 10.548095] setup-git-repo-start[607]: hint:967buildbot # [ 10.548665] setup-git-repo-start[607]: hint: Disable this message with "git config set advice.defaultBranchName false"968buildbot # [ 10.549840] setup-git-repo-start[607]: Initialized empty Git repository in /tmp/test-flake/.git/969buildbot # [ 10.552137] nginx-pre-start[584]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful970buildbot # [ 10.562408] systemd[1]: Started Nginx Web Server.971buildbot # [ 10.635614] setup-git-repo-start[618]: [master (root-commit) 7426195] Initial commit with scheduled effects972buildbot # [ 10.636899] setup-git-repo-start[618]: 3 files changed, 131 insertions(+)973buildbot # [ 10.637866] setup-git-repo-start[618]: create mode 100644 effects-lib.nix974buildbot # [ 10.638899] setup-git-repo-start[618]: create mode 100644 flake.lock975buildbot # [ 10.640472] setup-git-repo-start[618]: create mode 100644 flake.nix976buildbot # [ 10.664598] postgresql-pre-start[588]: selecting default "max_connections" ... 100977buildbot # [ 10.747760] postgresql-pre-start[588]: selecting default "shared_buffers" ... 128MB978buildbot # [ 10.752099] setup-git-repo-start[623]: To /srv/repos/test-flake.git979buildbot # [ 10.752988] setup-git-repo-start[623]: * [new branch] master -> master980buildbot # [ 10.754839] setup-git-repo-start[623]: branch 'master' set up to track 'origin/master'.981buildbot # [ 10.758742] systemd[1]: Finished Setup git test repository with scheduled effects.982buildbot: (finished: waiting for unit sshd.service, in 11.89 seconds)983buildbot: waiting for unit setup-git-repo.service984buildbot: (finished: waiting for unit setup-git-repo.service, in 0.10 seconds)985buildbot: waiting for unit multi-user.target986buildbot # [ 12.773427] dhcpcd[561]: eth0: soliciting an IPv6 router987buildbot # [ 12.774699] dhcpcd[561]: eth0: Router Advertisement from fe80::2988buildbot # [ 12.775651] dhcpcd[561]: eth0: adding address fec0::5054:ff:fe12:3456/64989buildbot # [ 12.776488] dhcpcd[561]: eth0: adding route to fec0::/64990buildbot # [ 12.777453] dhcpcd[561]: eth0: adding default route via fe80::2991buildbot # [ 13.692123] postgresql-pre-start[588]: selecting default time zone ... UTC992buildbot # [ 13.697310] postgresql-pre-start[588]: creating configuration files ... ok993buildbot # [ 13.952776] postgresql-pre-start[588]: running bootstrap script ... ok994buildbot # [ 14.613928] postgresql-pre-start[588]: performing post-bootstrap initialization ... ok995buildbot # [ 14.772529] postgresql-pre-start[588]: syncing data to disk ... ok996buildbot # [ 14.773329] postgresql-pre-start[588]: initdb: warning: enabling "trust" authentication for local connections997buildbot # [ 14.774359] postgresql-pre-start[588]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.998buildbot # [ 14.775987] postgresql-pre-start[588]: Success. You can now start the database server using:999buildbot # [ 14.776909] postgresql-pre-start[588]: pg_ctl -D /var/lib/postgresql/17 -l logfile start1000buildbot # [ 14.903741] postgres[695]: [695] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1001buildbot # [ 14.918321] postgres[695]: [695] LOG: listening on IPv6 address "::1", port 54321002buildbot # [ 14.919298] postgres[695]: [695] LOG: listening on IPv4 address "127.0.0.1", port 54321003buildbot # [ 14.922242] postgres[695]: [695] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1004buildbot # [ 14.935461] postgres[701]: [701] LOG: database system was shut down at 2026-08-23 02:59:05 GMT1005buildbot # [ 14.941615] postgres[695]: [695] LOG: database system is ready to accept connections1006buildbot # [ 14.950578] systemd[1]: Started PostgreSQL Server.1007buildbot # [ 14.955053] systemd[1]: Starting PostgreSQL Setup Scripts...1008buildbot # [ 15.158564] postgresql-setup-start[712]: CREATE DATABASE1009buildbot # [ 15.214876] postgresql-setup-start[717]: CREATE ROLE1010buildbot # [ 15.241452] postgresql-setup-start[719]: ALTER DATABASE1011buildbot # [ 15.247457] systemd[1]: Finished PostgreSQL Setup Scripts.1012buildbot # [ 15.249084] systemd[1]: Reached target PostgreSQL.1013buildbot # [ 15.253109] systemd[1]: Starting Buildbot Continuous Integration Server....1014buildbot # [ 15.319197] buildbot-master-pre-start[724]: mkdir: created directory '/var/lib/buildbot/master'1015buildbot # [ 16.236770] dhcpcd[561]: eth0: leased 10.0.2.15 for 86400 seconds1016buildbot # [ 16.238111] dhcpcd[561]: eth0: adding route to 10.0.2.0/241017buildbot # [ 16.238852] dhcpcd[561]: eth0: adding default route via 10.0.2.21018buildbot # [ 16.370219] systemd[1]: Started DHCP Client.1019buildbot # [ 23.642089] buildbot-master-pre-start[726]: updating existing installation1020buildbot # [ 23.642988] buildbot-master-pre-start[726]: not touching existing buildbot.tac1021buildbot # [ 23.643818] buildbot-master-pre-start[726]: creating buildbot.tac.new instead1022buildbot # [ 23.644667] buildbot-master-pre-start[726]: creating /var/lib/buildbot/master/master.cfg.sample1023buildbot # [ 23.646078] buildbot-master-pre-start[726]: creating database (postgresql://@/buildbot)1024buildbot # [ 23.646954] buildbot-master-pre-start[726]: buildmaster configured in /var/lib/buildbot/master1025buildbot # [ 23.830463] systemd[1]: Started Buildbot Continuous Integration Server..1026buildbot # [ 23.835323] systemd[1]: Started Buildbot Worker..1027buildbot # [ 23.836612] systemd[1]: Reached target Multi-User System.1028buildbot # [ 23.837758] systemd[1]: Startup finished in 795ms (kernel) + 3.826s (initrd) + 19.215s (userspace) = 23.837s.1029buildbot: (finished: waiting for unit multi-user.target, in 13.39 seconds)1030subtest: Master and worker services start1031buildbot: waiting for unit buildbot-master.service1032buildbot: (finished: waiting for unit buildbot-master.service, in 0.11 seconds)1033buildbot: waiting for unit buildbot-worker.service1034buildbot: (finished: waiting for unit buildbot-worker.service, in 0.11 seconds)1035buildbot: waiting for TCP port 8010 on localhost1036buildbot # [ 25.700219] twistd[854]: Starting worker local-worker-0001037buildbot # [ 25.701074] twistd[854]: 2026-08-23T02:59:16+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1038buildbot # [ 25.703140] twistd[854]: 2026-08-23T02:59:16+0000 [-] Loaded.1039buildbot # [ 25.703804] twistd[854]: 2026-08-23T02:59:16+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1040buildbot # [ 25.706253] twistd[854]: 2026-08-23T02:59:16+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1041buildbot # [ 25.707724] twistd[854]: 2026-08-23T02:59:16+0000 [-] Starting Worker -- version: 2026.06.261042buildbot # [ 25.708664] twistd[854]: 2026-08-23T02:59:16+0000 [-] recording hostname in twistd.hostname1043buildbot # [ 25.709551] twistd[854]: 2026-08-23T02:59:16+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x74b0cfb78590>1044buildbot # [ 25.720618] twistd[854]: 2026-08-23T02:59:16+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x74b0cfb78ad0> in 1.6994529712964193 seconds.1045buildbot # [ 25.722822] twistd[854]: 2026-08-23T02:59:16+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x74b0cfb78590>1046buildbot # [ 27.423084] twistd[854]: 2026-08-23T02:59:18+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x74b0cfb78590>1047buildbot # [ 27.427805] twistd[854]: 2026-08-23T02:59:18+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x74b0cfb78ad0> in 2.7093526533954164 seconds.1048buildbot # [ 27.430170] twistd[854]: 2026-08-23T02:59:18+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x74b0cfb78590>1049buildbot # [ 28.352191] twistd[853]: 2026-08-23T02:59:16+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1050buildbot # [ 28.353949] twistd[853]: 2026-08-23T02:59:19+0000 [-] Loaded.1051buildbot # [ 28.354675] twistd[853]: 2026-08-23T02:59:19+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1052buildbot # [ 28.356743] twistd[853]: 2026-08-23T02:59:19+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1053buildbot # [ 28.358410] twistd[853]: 2026-08-23T02:59:19+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01054buildbot # [ 28.372404] twistd[853]: 2026-08-23T02:59:19+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1055buildbot # [ 29.608201] twistd[853]: 2026-08-23T02:59:20+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1056buildbot # [ 29.725399] twistd[853]: 2026-08-23T02:59:20+0000 [-] adding 9 new builders, removing 01057buildbot # [ 29.827135] twistd[853]: 2026-08-23T02:59:21+0000 [-] adding 3 new services, removing 01058buildbot # [ 29.953339] twistd[853]: 2026-08-23T02:59:21+0000 [-] adding 1 new change_sources, removing 01059buildbot # [ 29.959124] twistd[853]: 2026-08-23T02:59:21+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1060buildbot # [ 29.965854] twistd[853]: 2026-08-23T02:59:21+0000 [-] adding 14 new schedulers, removing 01061buildbot # [ 30.120807] twistd[853]: 2026-08-23T02:59:21+0000 [-] BuildbotSite starting on 80101062buildbot # [ 30.121798] twistd[853]: 2026-08-23T02:59:21+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x797460488ad0>1063buildbot # [ 30.123289] twistd[853]: 2026-08-23T02:59:21+0000 [-] adding 5 new workers, removing 01064buildbot # [ 30.133525] twistd[853]: 2026-08-23T02:59:21+0000 [-] PBServerFactory starting on 99891065buildbot # [ 30.134839] twistd[853]: 2026-08-23T02:59:21+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x797460489550>1066buildbot # [ 30.142986] twistd[854]: 2026-08-23T02:59:21+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x74b0cfb78590>1067buildbot # [ 30.174451] twistd[853]: 2026-08-23T02:59:21+0000 [-] Starting Worker -- version: 2026.06.261068buildbot # [ 30.175452] twistd[853]: 2026-08-23T02:59:21+0000 [-] recording hostname in twistd.hostname1069buildbot # [ 30.176345] twistd[853]: 2026-08-23T02:59:21+0000 [-] message from master: attached1070buildbot # [ 30.178615] twistd[853]: 2026-08-23T02:59:21+0000 [-] Got workerinfo from '__Janitor'1071buildbot # [ 30.188626] twistd[853]: 2026-08-23T02:59:21+0000 [-] bot attached1072buildbot # [ 30.189858] twistd[853]: 2026-08-23T02:59:21+0000 [-] Worker __Janitor attached to __Janitor1073buildbot # [ 30.192141] twistd[853]: 2026-08-23T02:59:21+0000 [-] message from master: attached1074buildbot # [ 30.227485] twistd[853]: 2026-08-23T02:59:21+0000 [-] BuildMaster is running1075buildbot # [ 30.228319] twistd[853]: 2026-08-23T02:59:21+0000 [-] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=47208)1076buildbot # [ 30.230604] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1077buildbot # [ 30.235666] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1078buildbot # [ 30.241678] twistd[853]: 2026-08-23T02:59:21+0000 [-] bot attached1079buildbot # [ 30.245072] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1080buildbot # [ 30.246323] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1081buildbot # [ 30.247598] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1082buildbot # [ 30.248787] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1083buildbot # [ 30.250044] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1084buildbot # [ 30.251310] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1085buildbot # [ 30.252497] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1086buildbot # [ 30.253741] twistd[853]: 2026-08-23T02:59:21+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1087buildbot # [ 30.256809] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1088buildbot # [ 30.257775] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1089buildbot # [ 30.258706] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1090buildbot # [ 30.259633] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1091buildbot # [ 30.260546] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1092buildbot # [ 30.261446] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1093buildbot # [ 30.262355] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1094buildbot # [ 30.263314] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] message from master: attached1095buildbot # [ 30.278977] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] Connected to buildmaster; worker is ready1096buildbot # [ 30.280189] twistd[854]: 2026-08-23T02:59:21+0000 [Broker,client] sending application-level keepalives every 600 seconds1097buildbot # [ 30.386819] sshd-session[922]: Accepted publickey for root from ::1 port 59544 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81098buildbot # [ 30.403667] sshd-session[922]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1099buildbot # [ 30.456046] systemd[1]: Created slice Slice /user/0.1100buildbot # [ 30.459657] systemd[1]: Starting User Runtime Directory /run/user/0...1101buildbot # [ 30.470890] systemd-logind[432]: New session '1' of user 'root' with class 'user' and type 'tty'.1102buildbot # [ 30.511253] systemd[1]: Finished User Runtime Directory /run/user/0.1103buildbot # [ 30.515550] systemd[1]: Starting User Manager for UID 0...1104buildbot # [ 30.561826] (systemd)[933]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1105buildbot # [ 30.567603] systemd-logind[432]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1106buildbot # [ 30.929211] systemd[933]: Queued start job for default target Main User Target.1107buildbot # [ 30.933383] systemd[933]: Created slice User Application Slice.1108buildbot # [ 30.934568] systemd[933]: Started Daily Cleanup of User's Temporary Directories.1109buildbot # [ 30.935426] systemd[933]: Reached target Paths.1110buildbot # [ 30.936048] systemd[933]: Reached target Timers.1111buildbot # [ 30.939738] systemd[933]: Starting D-Bus User Message Bus Socket...1112buildbot # [ 30.942097] systemd[933]: Starting Create User Files and Directories...1113buildbot # [ 30.996083] systemd[933]: Finished Create User Files and Directories.1114buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1115buildbot # [ 31.078080] systemd[933]: Listening on D-Bus User Message Bus Socket.1116buildbot # [ 31.079843] systemd[933]: Reached target Sockets.1117buildbot # [ 31.081223] systemd[933]: Reached target Basic System.1118buildbot # [ 31.081916] systemd[933]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1119buildbot # [ 31.083076] systemd[933]: Reached target Main User Target.1120buildbot # [ 31.083791] systemd[933]: Startup finished in 483ms.1121buildbot # [ 31.085663] systemd[1]: Started User Manager for UID 0.1122buildbot # [ 31.088182] systemd[1]: Started Session 1 of User root.1123buildbot: (finished: waiting for TCP port 8010 on localhost, in 6.43 seconds)1124buildbot: waiting for success: curl --fail --head http://localhost:80101125buildbot # [ 31.131804] sshd-session[949]: Received disconnect from ::1 port 59544:11: disconnected by user1126buildbot # [ 31.133800] sshd-session[949]: Disconnected from user root ::1 port 595441127buildbot # [ 31.135597] sshd-session[922]: pam_unix(sshd:session): session closed for user root1128buildbot # [ 31.145208] systemd[1]: session-1.scope: Deactivated successfully.1129buildbot # [ 31.148085] systemd-logind[432]: Session 1 logged out. Waiting for processes to exit.1130buildbot # [ 31.151357] systemd-logind[432]: Removed session 1.1131buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1132buildbot # Dload Upload Total Spent Left Speed1133buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01134buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.16 seconds)1135(finished: subtest: Master and worker services start, in 6.81 seconds)1136subtest: Project is registered1137buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1138buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1139buildbot # Dload Upload Total Spent Left Speed1140buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 11298 0 0100 266 100 266 0 0 9137 0 0100 266 100 266 0 0 7952 0 01141buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.11 seconds)1142(finished: subtest: Project is registered, in 0.11 seconds)1143subtest: CLI list-schedules works1144buildbot: must succeed: 1145 cd /tmp/test-flake1146 buildbot-effects list-schedules1147 1148buildbot # [ 31.362504] sshd-session[958]: Accepted publickey for root from ::1 port 59548 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81149buildbot # [ 31.378079] sshd-session[958]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1150buildbot # [ 31.386136] systemd-logind[432]: New session '3' of user 'root' with class 'user' and type 'tty'.1151buildbot # [ 31.389681] systemd[1]: Started Session 3 of User root.1152buildbot # [ 31.448690] sshd-session[969]: Received disconnect from ::1 port 59548:11: disconnected by user1153buildbot # [ 31.450846] sshd-session[969]: Disconnected from user root ::1 port 595481154buildbot # [ 31.452092] sshd-session[958]: pam_unix(sshd:session): session closed for user root1155buildbot # [ 31.458968] systemd[1]: session-3.scope: Deactivated successfully.1156buildbot # [ 31.462379] systemd-logind[432]: Session 3 logged out. Waiting for processes to exit.1157buildbot # [ 31.464220] systemd-logind[432]: Removed session 3.1158buildbot # [ 31.492306] twistd[853]: 2026-08-23T02:59:22+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1159buildbot: (finished: must succeed: 1160 cd /tmp/test-flake1161 buildbot-effects list-schedules1162 , in 0.58 seconds)1163(finished: subtest: CLI list-schedules works, in 0.58 seconds)1164subtest: Push a new commit to trigger build1165buildbot: must succeed: 1166 cd /tmp/test-flake1167 echo "# trigger rebuild" >> flake.nix1168 git add flake.nix1169 git commit -m "Trigger build"1170 git push origin master1171 1172buildbot # Enumerating objects: 5, done.1173buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1174buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1175buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 296.00 KiB/s, done.1176buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1177buildbot # To /srv/repos/test-flake.git1178buildbot # 7426195..7ceff00 master -> master1179buildbot: (finished: must succeed: 1180 cd /tmp/test-flake1181 echo "# trigger rebuild" >> flake.nix1182 git add flake.nix1183 git commit -m "Trigger build"1184 git push origin master1185 , in 0.13 seconds)1186(finished: subtest: Push a new commit to trigger build, in 0.13 seconds)1187subtest: Wait for nix-eval build to complete1188buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1189buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1190buildbot # Dload Upload Total Spent Left Speed1191buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2530 0 0100 51 100 51 0 0 2059 0 0100 51 100 51 0 0 1754 0 01192buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1193buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1194buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1195buildbot # Dload Upload Total Spent Left Speed1196buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2088 0 0100 51 100 51 0 0 1758 0 0100 51 100 51 0 0 1528 0 01197buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1198buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1199buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1200buildbot # Dload Upload Total Spent Left Speed1201buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1994 0 0100 51 100 51 0 0 1703 0 0100 51 100 51 0 0 1483 0 01202buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1203buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1204buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1205buildbot # Dload Upload Total Spent Left Speed1206buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1887 0 0100 51 100 51 0 0 1614 0 0100 51 100 51 0 0 1418 0 01207buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1208buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1209buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1210buildbot # Dload Upload Total Spent Left Speed1211buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1791 0 0100 51 100 51 0 0 1540 0 0100 51 100 51 0 0 1361 0 01212buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1213buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1214buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1215buildbot # Dload Upload Total Spent Left Speed1216buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2070 0 0100 51 100 51 0 0 1723 0 0100 51 100 51 0 0 1485 0 01217buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1218buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1219buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1220buildbot # Dload Upload Total Spent Left Speed1221buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2014 0 0100 51 100 51 0 0 1705 0 0100 51 100 51 0 0 1488 0 01222buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1223buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1224buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1225buildbot # Dload Upload Total Spent Left Speed1226buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1979 0 0100 51 100 51 0 0 1682 0 0100 51 100 51 0 0 1469 0 01227buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1228buildbot # [ 40.185308] sshd-session[1039]: Accepted publickey for root from ::1 port 34732 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81229buildbot # [ 40.206147] sshd-session[1039]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1230buildbot # [ 40.219431] systemd-logind[432]: New session '4' of user 'root' with class 'user' and type 'tty'.1231buildbot # [ 40.224534] systemd[1]: Started Session 4 of User root.1232buildbot # [ 40.264675] sshd-session[1042]: Received disconnect from ::1 port 34732:11: disconnected by user1233buildbot # [ 40.265804] sshd-session[1042]: Disconnected from user root ::1 port 347321234buildbot # [ 40.267215] sshd-session[1039]: pam_unix(sshd:session): session closed for user root1235buildbot # [ 40.276147] systemd[1]: session-4.scope: Deactivated successfully.1236buildbot # [ 40.280622] systemd-logind[432]: Session 4 logged out. Waiting for processes to exit.1237buildbot # [ 40.282319] systemd-logind[432]: Removed session 4.1238buildbot # [ 40.481319] sshd-session[1047]: Accepted publickey for root from ::1 port 34748 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81239buildbot # [ 40.500938] sshd-session[1047]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1240buildbot # [ 40.515264] systemd-logind[432]: New session '5' of user 'root' with class 'user' and type 'tty'.1241buildbot # [ 40.517228] systemd[1]: Started Session 5 of User root.1242buildbot # [ 40.569795] sshd-session[1050]: Received disconnect from ::1 port 34748:11: disconnected by user1243buildbot # [ 40.570935] sshd-session[1050]: Disconnected from user root ::1 port 347481244buildbot # [ 40.572343] sshd-session[1047]: pam_unix(sshd:session): session closed for user root1245buildbot # [ 40.580474] systemd[1]: session-5.scope: Deactivated successfully.1246buildbot # [ 40.582108] systemd-logind[432]: Session 5 logged out. Waiting for processes to exit.1247buildbot # [ 40.584840] systemd-logind[432]: Removed session 5.1248buildbot # [ 40.603067] twistd[853]: 2026-08-23T02:59:31+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1249buildbot # [ 40.633751] twistd[853]: 2026-08-23T02:59:31+0000 [-] gitpoller: processing 1 changes: ['7ceff00643a7d080d9ba92c798f9476e193089ba'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1250buildbot # [ 40.707068] twistd[853]: 2026-08-23T02:59:31+0000 [-] added change with revision 7ceff00643a7d080d9ba92c798f9476e193089ba to database1251buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1252buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1253buildbot # Dload Upload Total Spent Left Speed1254buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1914 0 0100 51 100 51 0 0 1640 0 0100 51 100 51 0 0 1437 0 01255buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1256buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1257buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1258buildbot # Dload Upload Total Spent Left Speed1259buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2092 0 0100 51 100 51 0 0 1762 0 0100 51 100 51 0 0 1530 0 01260buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1261buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1262buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1263buildbot # Dload Upload Total Spent Left Speed1264buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2011 0 0100 51 100 51 0 0 1712 0 0100 51 100 51 0 0 1493 0 01265buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1266buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1267buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1268buildbot # Dload Upload Total Spent Left Speed1269buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1890 0 0100 51 100 51 0 0 1600 0 0100 51 100 51 0 0 1405 0 01270buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1271buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1272buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1273buildbot # Dload Upload Total Spent Left Speed1274buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2147 0 0100 51 100 51 0 0 1799 0 0100 51 100 51 0 0 1557 0 01275buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1276buildbot # [ 45.748732] twistd[853]: 2026-08-23T02:59:36+0000 [-] added buildset 1 to database1277buildbot # [ 45.894682] twistd[853]: 2026-08-23T02:59:37+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1278buildbot # [ 45.899830] twistd[853]: 2026-08-23T02:59:37+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1279buildbot # [ 45.962225] twistd[853]: 2026-08-23T02:59:37+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1280buildbot # [ 45.966125] twistd[853]: 2026-08-23T02:59:37+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1281buildbot # [ 45.968179] twistd[853]: 2026-08-23T02:59:37+0000 [-] sending ping1282buildbot # [ 45.969585] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] message from master: ping1283buildbot # [ 45.970878] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] ping finished: success1284buildbot # [ 45.991275] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1285buildbot # [ 45.992463] twistd[853]: 2026-08-23T02:59:37+0000 [-] command '['git', '--version']' in dir 'build'1286buildbot # [ 45.995279] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 0): startCommand:shell1287buildbot # [ 45.996273] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1288buildbot # [ 45.997421] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '--version']): git --version1289buildbot # [ 45.999292] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1290buildbot # [ 46.001205] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1291buildbot # [ 46.002484] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1292buildbot # [ 46.003857] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '--version']): using PTY: False1293buildbot # [ 46.020708] twistd[854]: 2026-08-23T02:59:37+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0148311294buildbot # [ 46.022176] twistd[854]: 2026-08-23T02:59:37+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb7aba0>1295buildbot # [ 46.051832] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01296buildbot # [ 46.088457] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteCommand 'stat' at 133540736632544>: RemoteCommand.run [1]1297buildbot # [ 46.096059] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 1): startCommand:stat1298buildbot # [ 46.097098] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1299buildbot # [ 46.099583] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x74b0cfb79400>1300buildbot # [ 46.101797] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 133540736632544> rc=21301buildbot # [ 46.122876] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteCommand 'mkdir' at 133540738370128>: RemoteCommand.run [2]1302buildbot # [ 46.145076] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 2): startCommand:mkdir1303buildbot # [ 46.146104] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x74b0cfb79160>1304buildbot # [ 46.148754] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 133540738370128> rc=01305buildbot # [ 46.155098] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteCommand 'downloadFile' at 133540738369168>: RemoteCommand.run [3]1306buildbot # [ 46.191058] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 3): startCommand:downloadFile1307buildbot # [ 46.193917] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x74b0cfb781a0>1308buildbot # [ 46.198846] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 133540738369168> rc=01309buildbot # [ 46.208586] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteCommand 'listdir' at 133540736907408>: RemoteCommand.run [4]1310buildbot # [ 46.238845] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 4): startCommand:listdir1311buildbot # [ 46.241527] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x74b0cfb792b0>1312buildbot # [ 46.247544] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 133540736907408> rc=01313buildbot # [ 46.261154] twistd[853]: 2026-08-23T02:59:37+0000 [-] No git repo present, making full clone1314buildbot # [ 46.263100] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1315buildbot # [ 46.268870] twistd[853]: 2026-08-23T02:59:37+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1316buildbot # [ 46.294116] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command 5): startCommand:shell1317buildbot # [ 46.296164] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1318buildbot # [ 46.301959] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1319buildbot # [ 46.326037] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1320buildbot # [ 46.329665] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1321buildbot # [ 46.332477] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1322buildbot # [ 46.337140] twistd[854]: 2026-08-23T02:59:37+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1323buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1324buildbot # [ 46.556815] sshd-session[1085]: Accepted publickey for root from ::1 port 50128 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81325buildbot # [ 46.581388] sshd-session[1085]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1326buildbot # [ 46.591164] systemd-logind[432]: New session '6' of user 'root' with class 'user' and type 'tty'.1327buildbot # [ 46.593377] systemd[1]: Started Session 6 of User root.1328buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1329buildbot # Dload Upload Total Spent Left Speed1330buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 13976 0 0100 401 100 401 0 0 10671 0 [ 46.671496] sshd-session[1091]: Received disconnect from ::1 port 50128:11: disconnected by user1331buildbot # [ 46.675093] sshd-session[1091]: Disconnected from user root ::1 port 501281332buildbot # [ 46.675949] sshd-session[1085]: pam_unix(sshd:session): session closed for user root1333buildbot # 0100 401 100 401 0[ 46.684445] systemd[1]: session-6.scope: Deactivated successfully.1334buildbot # 0[ 46.687684] systemd-logind[432]: Session 6 logged out. Waiting for processes to exit.1335buildbot # 7160 0 [ 46.691527] systemd-logind[432]: Removed session 6.1336buildbot # 01337buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1338buildbot # [ 46.708255] twistd[854]: 2026-08-23T02:59:37+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3959711339buildbot # [ 46.711690] twistd[854]: 2026-08-23T02:59:37+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb91090>1340buildbot # [ 46.715698] twistd[853]: 2026-08-23T02:59:37+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01341buildbot # [ 46.739359] twistd[853]: 2026-08-23T02:59:37+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']'>: RemoteCommand.run [6]1342buildbot # [ 46.742038] twistd[853]: 2026-08-23T02:59:37+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']' in dir 'build'1343buildbot # [ 46.761062] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command 6): startCommand:shell1344buildbot # [ 46.762142] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): RunProcess._startCommand1345buildbot # [ 46.764966] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 7ceff00643a7d080d9ba92c798f9476e193089ba1346buildbot # [ 46.769039] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1347buildbot # [ 46.772319] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): watching logfiles {}1348buildbot # [ 46.775066] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'7ceff00643a7d080d9ba92c798f9476e193089ba']1349buildbot # [ 46.780639] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): using PTY: False1350buildbot # [ 46.802415] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']): command finished with signal None, exit code 0, elapsedTime: 0.0228331351buildbot # [ 46.805591] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb91450>1352buildbot # [ 46.829614] twistd[853]: 2026-08-23T02:59:38+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '7ceff00643a7d080d9ba92c798f9476e193089ba']'> rc=01353buildbot # [ 46.851087] twistd[853]: 2026-08-23T02:59:38+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1354buildbot # [ 46.853614] twistd[853]: 2026-08-23T02:59:38+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1355buildbot # [ 46.870884] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command 7): startCommand:shell1356buildbot # [ 46.872208] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1357buildbot # [ 46.874893] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1358buildbot # [ 46.878640] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1359buildbot # [ 46.881801] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1360buildbot # [ 46.884390] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1361buildbot # [ 46.889767] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1362buildbot # [ 47.035441] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1463101363buildbot # [ 47.038537] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb36520>1364buildbot # [ 47.041979] twistd[853]: 2026-08-23T02:59:38+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01365buildbot # [ 47.058943] twistd[853]: 2026-08-23T02:59:38+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1366buildbot # [ 47.061065] twistd[853]: 2026-08-23T02:59:38+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1367buildbot # [ 47.086895] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command 8): startCommand:shell1368buildbot # [ 47.088212] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1369buildbot # [ 47.089589] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1370buildbot # [ 47.090925] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1371buildbot # [ 47.092804] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1372buildbot # [ 47.095498] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1373buildbot # [ 47.096837] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1374buildbot # [ 47.110504] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0160621375buildbot # [ 47.112230] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb36650>1376buildbot # [ 47.142540] twistd[853]: 2026-08-23T02:59:38+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01377buildbot # [ 47.163375] twistd[853]: 2026-08-23T02:59:38+0000 [-] Got Git revision 7ceff00643a7d080d9ba92c798f9476e193089ba1378buildbot # [ 47.165034] twistd[853]: 2026-08-23T02:59:38+0000 [-] <RemoteCommand 'rmdir' at 133540736908688>: RemoteCommand.run [9]1379buildbot # [ 47.185627] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command 9): startCommand:rmdir1380buildbot # [ 47.187031] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1381buildbot # [ 47.189405] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1382buildbot # [ 47.191738] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1383buildbot # [ 47.195334] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1384buildbot # [ 47.197057] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1385buildbot # [ 47.199293] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1386buildbot # [ 47.215625] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0214221387buildbot # [ 47.217939] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x74b0cfb7b0e0>1388buildbot # [ 47.245435] twistd[853]: 2026-08-23T02:59:38+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 133540736908688> rc=01389buildbot # [ 47.264693] twistd[853]: 2026-08-23T02:59:38+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1390buildbot # [ 47.282095] twistd[853]: 2026-08-23T02:59:38+0000 [-] step 'git' complete: success (None)1391buildbot # [ 47.288689] twistd[853]: 2026-08-23T02:59:38+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7974620c52b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7974620c6660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7974620c6660>)])1392buildbot # [ 47.301980] twistd[853]: 2026-08-23T02:59:38+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1393buildbot # [ 47.304484] twistd[853]: 2026-08-23T02:59:38+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1394buildbot # [ 47.306781] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command 10): startCommand:shell1395buildbot # [ 47.308445] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1396buildbot # [ 47.310235] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1397buildbot # [ 47.312338] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1398buildbot # [ 47.316028] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1399buildbot # [ 47.317633] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1400buildbot # [ 47.319697] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1401buildbot # [ 47.342510] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0274961402buildbot # [ 47.344624] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0d015be30>1403buildbot # [ 47.364812] twistd[853]: 2026-08-23T02:59:38+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01404buildbot # [ 47.369303] twistd[853]: 2026-08-23T02:59:38+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1405buildbot # [ 47.372913] twistd[853]: 2026-08-23T02:59:38+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1406buildbot # [ 47.409637] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command 11): startCommand:shell1407buildbot # [ 47.411027] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1408buildbot # [ 47.414630] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1409buildbot # [ 47.420135] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1410buildbot # [ 47.425702] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1411buildbot # [ 47.429130] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1412buildbot # [ 47.435023] twistd[854]: 2026-08-23T02:59:38+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1413buildbot # [ 47.585185] systemd[1]: Started Nix Daemon.1414buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1415buildbot # [ 47.714218] nix-daemon[1133]: accepted connection from pid 1132, user buildbot-worker1416buildbot # [ 47.751764] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.3262231417buildbot # [ 47.755535] twistd[854]: 2026-08-23T02:59:38+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb98af0>1418buildbot # [ 47.758864] twistd[853]: 2026-08-23T02:59:39+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01419buildbot # % Total % Received % Xferd Average Speed Time Time [ 47.792985] twistd[853]: 2026-08-23T02:59:39+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7974620c52b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7974620c6660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7974620c6660>)]1420buildbot # Time Current1421buildbot # Dload Upload Total Spent Left Speed1422buildbot # 0 0 0 0 0 0 [ 47.812102] twistd[853]: 2026-08-23T02:59:39+0000 [-] step 'Evaluate flake' complete: success (None)1423buildbot # 0 0 0100 401 100 401 0 0 11074 0 0100 401 100 401 0 0 9470 0 0100 401 100 401 0 0 8197 0 01424buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1425buildbot # [ 47.852446] twistd[853]: 2026-08-23T02:59:39+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1426buildbot # [ 47.861337] twistd[853]: 2026-08-23T02:59:39+0000 [-] step 'build flake' complete: success (None)1427buildbot # [ 47.872744] twistd[853]: 2026-08-23T02:59:39+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x797461f20ae0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x797461f20b80>)): []1428buildbot # [ 47.879938] twistd[853]: 2026-08-23T02:59:39+0000 [-] step 'Process skipped builds' complete: skipped (None)1429buildbot # [ 47.891036] twistd[853]: 2026-08-23T02:59:39+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1430buildbot # [ 47.893405] twistd[853]: 2026-08-23T02:59:39+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1431buildbot # [ 47.896043] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command 12): startCommand:shell1432buildbot # [ 47.897450] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1433buildbot # [ 47.899383] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1434buildbot # [ 47.901834] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1435buildbot # [ 47.904243] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1436buildbot # [ 47.907614] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1437buildbot # [ 47.910075] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1438buildbot # [ 47.924415] twistd[854]: 2026-08-23T02:59:39+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0178841439buildbot # [ 47.926690] twistd[854]: 2026-08-23T02:59:39+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfb98f30>1440buildbot # [ 47.956323] twistd[853]: 2026-08-23T02:59:39+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01441buildbot # [ 48.043690] twistd[853]: 2026-08-23T02:59:39+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1442buildbot # [ 48.050735] twistd[853]: 2026-08-23T02:59:39+0000 [-] step 'Cleanup drv paths' complete: success (None)1443buildbot # [ 48.061758] twistd[853]: 2026-08-23T02:59:39+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1444buildbot # [ 48.064698] twistd[853]: 2026-08-23T02:59:39+0000 [-] command '['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1445buildbot # [ 48.067946] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command 13): startCommand:shell1446buildbot # [ 48.069304] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1447buildbot # [ 48.071518] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 7ceff00643a7d080d9ba92c798f9476e193089ba --branch master --repo test-flake1448buildbot # [ 48.074315] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1449buildbot # [ 48.078501] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1450buildbot # [ 48.080462] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'7ceff00643a7d080d9ba92c798f9476e193089ba', b'--branch', b'master', b'--repo', b'test-flake']1451buildbot # [ 48.083389] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1452buildbot # [ 48.453955] nix-daemon[1133]: accepted connection from pid 1145, user buildbot-worker1453buildbot # [ 48.485228] twistd[854]: 2026-08-23T02:59:39+0000 [-] (command ['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4076651454buildbot # [ 48.487829] twistd[854]: 2026-08-23T02:59:39+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfba8550>1455buildbot # [ 48.491825] twistd[853]: 2026-08-23T02:59:39+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']'> rc=01456buildbot # [ 48.523745] twistd[853]: 2026-08-23T02:59:39+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x797461f21300>, logEnviron=False)): []1457buildbot # [ 48.531844] twistd[853]: 2026-08-23T02:59:39+0000 [-] step 'Evaluate effects' complete: success (None)1458buildbot # [ 48.544266] twistd[853]: 2026-08-23T02:59:39+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1459buildbot # [ 48.550481] twistd[853]: 2026-08-23T02:59:39+0000 [-] step 'Buildbot effect' complete: success (None)1460buildbot # [ 48.560923] twistd[853]: 2026-08-23T02:59:39+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1461buildbot # [ 48.563939] twistd[853]: 2026-08-23T02:59:39+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1462buildbot # [ 48.566790] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command 14): startCommand:shell1463buildbot # [ 48.568250] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1464buildbot # [ 48.570521] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 7ceff00643a7d080d9ba92c798f9476e193089ba --branch master --repo test-flake1465buildbot # [ 48.573458] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1466buildbot # [ 48.577623] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1467buildbot # [ 48.579694] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'7ceff00643a7d080d9ba92c798f9476e193089ba', b'--branch', b'master', b'--repo', b'test-flake']1468buildbot # [ 48.582747] twistd[854]: 2026-08-23T02:59:39+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1469buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1470buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1471buildbot # Dload Upload Total Spent Left Speed1472buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 16215 0 0100 401 100 401 0 0 12722 0 0100 401 100 401 0 0 10586 0 01473buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1474buildbot # [ 48.964176] nix-daemon[1133]: accepted connection from pid 1154, user buildbot-worker1475buildbot # [ 48.995199] twistd[854]: 2026-08-23T02:59:40+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4185141476buildbot # [ 48.997955] twistd[854]: 2026-08-23T02:59:40+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74b0cfba8850>1477buildbot # [ 49.003319] twistd[853]: 2026-08-23T02:59:40+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '7ceff00643a7d080d9ba92c798f9476e193089ba', '--branch', 'master', '--repo', 'test-flake']'> rc=01478buildbot # [ 49.040224] twistd[853]: 2026-08-23T02:59:40+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7974620c4d70>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x797461f214e0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x797461f21580>, logEnviron=False)): []1479buildbot # [ 49.050982] twistd[853]: 2026-08-23T02:59:40+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1480buildbot # [ 49.052268] twistd[853]: 2026-08-23T02:59:40+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1481buildbot # [ 49.060411] twistd[853]: 2026-08-23T02:59:40+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1482buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1483buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1484buildbot # Dload Upload Total Spent Left Speed1485buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 15723 0 0100 411 100 411 0 0 12607 0 0100 411 100 411 0 0 10604 0 01486buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1487(finished: subtest: Wait for nix-eval build to complete, in 18.02 seconds)1488subtest: Schedule cache is created1489buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1490buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1491buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1492buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1493(finished: subtest: Schedule cache is created, in 0.07 seconds)1494subtest: Nightly schedulers are created1495buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1496buildbot # [ 50.173272] sshd-session[1174]: Accepted publickey for root from ::1 port 50144 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81497buildbot # [ 50.183669] sshd-session[1174]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1498buildbot # [ 50.194678] systemd-logind[432]: New session '7' of user 'root' with class 'user' and type 'tty'.1499buildbot # [ 50.196434] systemd[1]: Started Session 7 of User root.1500buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1501buildbot # Dload Upload Total Spent Left Speed1502buildbot # 0 0 0 0 0 0 0 0 0[ 50.246294] sshd-session[1187]: Received disconnect from ::1 port 50144:11: disconnected by user1503buildbot # [ 50.252256] sshd-session[1187]: Disconnected from user root ::1 port 501441504buildbot # [ 50.255588] sshd-session[1174]: pam_unix(sshd:session): session closed for user root1505buildbot # [ 50.261118] systemd[1]: session-7.scope: Deactivated successfully.1506buildbot # [ 50.264098] systemd-logind[432]: Session 7 logged out. Waiting for processes to exit.1507buildbot # [ 50.268663] systemd-logind[432]: Removed session 7.1508buildbot # 100 3793 100 3793 0 0 43272 0 0100 3793 100 3793 0 0 40603 0 0100 3793 100 3793 0 0 38306 0 01509buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1510buildbot # [ 50.494284] sshd-session[1200]: Accepted publickey for root from ::1 port 50154 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81511buildbot # [ 50.513899] sshd-session[1200]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1512buildbot # [ 50.527411] systemd-logind[432]: New session '8' of user 'root' with class 'user' and type 'tty'.1513buildbot # [ 50.530396] systemd[1]: Started Session 8 of User root.1514buildbot # [ 50.579923] sshd-session[1203]: Received disconnect from ::1 port 50154:11: disconnected by user1515buildbot # [ 50.581164] sshd-session[1203]: Disconnected from user root ::1 port 501541516buildbot # [ 50.582237] sshd-session[1200]: pam_unix(sshd:session): session closed for user root1517buildbot # [ 50.588951] systemd[1]: session-8.scope: Deactivated successfully.1518buildbot # [ 50.591978] systemd-logind[432]: Session 8 logged out. Waiting for processes to exit.1519buildbot # [ 50.595535] systemd-logind[432]: Removed session 8.1520buildbot # [ 50.598446] twistd[853]: 2026-08-23T02:59:41+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1521buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1522buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1523buildbot # Dload Upload Total Spent Left Speed1524buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 50684 0 0100 3793 100 3793 0 0 47743 0 0100 3793 100 3793 0 0 45232 0 01525buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1526buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1527buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1528buildbot # Dload Upload Total Spent Left Speed1529buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 50722 0 0100 3793 100 3793 0 0 47781 0 0100 3793 100 3793 0 0 45281 0 01530buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1531buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1532buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1533buildbot # Dload Upload Total Spent Left Speed1534buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 49966 0 0100 3793 100 3793 0 0 47127 0 0100 3793 100 3793 0 0 44687 0 01535buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1536buildbot # [ 54.036978] twistd[853]: 2026-08-23T02:59:45+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1537buildbot # [ 54.041093] twistd[853]: 2026-08-23T02:59:45+0000 [-] beginning configuration update1538buildbot # [ 54.044151] twistd[853]: 2026-08-23T02:59:45+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1539buildbot # [ 54.082188] twistd[853]: 2026-08-23T02:59:45+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1540buildbot # [ 54.087944] twistd[853]: 2026-08-23T02:59:45+0000 [-] adding 1 new schedulers, removing 01541buildbot # [ 54.191886] twistd[853]: 2026-08-23T02:59:45+0000 [-] configuration update complete (took 0.155 seconds)1542buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1543buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1544buildbot # Dload Upload Total Spent Left Speed1545buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 51563 0 0100 4079 100 4079 0 0 48765 0 0100 4079 100 4079 0 0 46335 0 01546buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds)1547buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1548buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1549buildbot # Dload Upload Total Spent Left Speed1550buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 59176 0 0100 4079 100 4079 0 0 55501 0 0100 4079 100 4079 0 0 52382 0 01551buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds)1552(finished: subtest: Nightly schedulers are created, in 4.97 seconds)1553subtest: Scheduled effect builder exists1554buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1555buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1556buildbot # Dload Upload Total Spent Left Speed1557buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 123.2k 0 0100 2371 100 2371 0 0 99.59k 0 0100 2371 100 2371 0 0 85955 0 01558buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.09 seconds)1559(finished: subtest: Scheduled effect builder exists, in 0.09 seconds)1560(finished: run the VM test script, in 56.13 seconds)1561test script finished in 56.19s1562cleanup1563kill QemuMachine (pid 12)1564buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13)1565(finished: cleanup, in 0.26 seconds)1566additionally exposed symbols:1567 buildbot,1568 vlan1,1569 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh