vm-test-run-buildbot-nix-gitea
checks.x86_64-linux.gitea
· build #60
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit gitea.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot: QEMU running (pid 45)11buildbot # Disk image does not exist, creating the virtualisation disk image...12buildbot # Formatting '/build/vm-state-buildbot/tmp.PPdD8RvPWJ', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 7f5a9249-9708-40b4-b936-683a80fdcb9117buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:02.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:08.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.48 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Aug 28 06:22:54 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ncv9ff1db73m4kx48m8dfc4k1l1rj549-nixos-system-buildbot-test/init regInfo=/nix/store/sd3sibs1s6l52njada6gdmh7siqc9wnd-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved51buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved52buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved53buildbot # [ 0.000000] NX (Execute Disable) protection: active54buildbot # [ 0.000000] APIC: Static calls initialized55buildbot # [ 0.000000] SMBIOS 2.8 present.56buildbot # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201457buildbot # [ 0.000000] DMI: Memory slots populated: 1/158buildbot # [ 0.000000] Hypervisor detected: KVM59buildbot # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000060buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0061buildbot # [ 0.000000] kvm-clock: using sched offset of 532020364 cycles62buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns63buildbot # [ 0.000004] tsc: Detected 2400.010 MHz processor64buildbot # [ 0.000811] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000065buildbot # [ 0.000848] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs66buildbot # [ 0.000851] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT67buildbot # [ 0.002768] found SMP MP-table at [mem 0x000f5450-0x000f545f]68buildbot # [ 0.002780] Using GB pages for direct mapping69buildbot # [ 0.002896] RAMDISK: [mem 0x3e369000-0x3ffcffff]70buildbot # [ 0.002904] ACPI: Early table checksum verification disabled71buildbot # [ 0.002907] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )72buildbot # [ 0.002911] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002916] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001)74buildbot # [ 0.002923] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002925] ACPI: FACS 0x000000003FFE0000 00004076buildbot # [ 0.002927] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002928] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)78buildbot # [ 0.002930] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)79buildbot # [ 0.002931] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)80buildbot # [ 0.002933] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d]81buildbot # [ 0.002934] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219]82buildbot # [ 0.002934] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]83buildbot # [ 0.002935] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385]84buildbot # [ 0.002935] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd]85buildbot # [ 0.002936] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9]86buildbot # [ 0.002936] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421]87buildbot # [ 0.003436] No NUMA configuration found88buildbot # [ 0.003438] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff]89buildbot # [ 0.003441] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff]90buildbot # [ 0.005981] Zone ranges:91buildbot # [ 0.005982] DMA [mem 0x0000000000001000-0x0000000000ffffff]92buildbot # [ 0.005984] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff]93buildbot # [ 0.005985] Normal empty94buildbot # [ 0.005986] Device empty95buildbot # [ 0.005986] Movable zone start for each node96buildbot # [ 0.005987] Early memory node ranges97buildbot # [ 0.005987] node 0: [mem 0x0000000000001000-0x000000000009efff]98buildbot # [ 0.005988] node 0: [mem 0x0000000000100000-0x000000003ffd7fff]99buildbot # [ 0.005989] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]100buildbot # [ 0.006010] On node 0, zone DMA: 1 pages in unavailable ranges101buildbot # [ 0.006287] On node 0, zone DMA: 97 pages in unavailable ranges102buildbot # [ 0.024632] On node 0, zone DMA32: 40 pages in unavailable ranges103buildbot # [ 0.025740] ACPI: PM-Timer IO Port: 0x608104buildbot # [ 0.025754] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])105buildbot # [ 0.025783] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23106buildbot # [ 0.025786] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)107buildbot # [ 0.025787] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)108buildbot # [ 0.025789] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)109buildbot # [ 0.025790] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)110buildbot # [ 0.025791] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)111buildbot # [ 0.025793] ACPI: Using ACPI (MADT) for SMP configuration information112buildbot # [ 0.025794] ACPI: HPET id: 0x8086a201 base: 0xfed00000113buildbot # [ 0.025798] TSC deadline timer available114buildbot # [ 0.025802] CPU topo: Max. logical packages: 1115buildbot # [ 0.025803] CPU topo: Max. logical dies: 1116buildbot # [ 0.025803] CPU topo: Max. dies per package: 1117buildbot # [ 0.025806] CPU topo: Max. threads per core: 1118buildbot # [ 0.025807] CPU topo: Num. cores per package: 1119buildbot # [ 0.025807] CPU topo: Num. threads per package: 1120buildbot # [ 0.025808] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs121buildbot # [ 0.025827] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()122buildbot # [ 0.025870] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]123buildbot # [ 0.025871] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]124buildbot # [ 0.025872] [mem 0x40000000-0xafffffff] available for PCI devices125buildbot # [ 0.025874] Booting paravirtualized kernel on KVM126buildbot # [ 0.025876] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns127buildbot # [ 0.030317] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1128buildbot # [ 0.032582] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152129buildbot # [ 0.032626] kvm-guest: PV spinlocks disabled, single CPU130buildbot # [ 0.032627] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ncv9ff1db73m4kx48m8dfc4k1l1rj549-nixos-system-buildbot-test/init regInfo=/nix/store/sd3sibs1s6l52njada6gdmh7siqc9wnd-closure-info/registration console=ttyS0,115200n8 console=tty0131buildbot # [ 0.032721] Unknown kernel command line parameters "regInfo=/nix/store/sd3sibs1s6l52njada6gdmh7siqc9wnd-closure-info/registration", will be passed to user space.132buildbot # [ 0.032733] random: crng init done133buildbot # [ 0.032733] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes134buildbot # [ 0.033853] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)135buildbot # [ 0.033866] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)136buildbot # [ 0.033897] Fallback order for Node 0: 0137buildbot # [ 0.033899] Built 1 zonelists, mobility grouping on. Total pages: 262006138buildbot # [ 0.033900] Policy zone: DMA32139buildbot # [ 0.036472] mem auto-init: stack:all(zero), heap alloc:on, heap free:off140buildbot # [ 0.039047] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1141buildbot # [ 0.041370] allocated 2097152 bytes of page_ext142buildbot # [ 0.051086] ftrace: allocating 48733 entries in 192 pages143buildbot # [ 0.051089] ftrace: allocated 192 pages with 2 groups144buildbot # [ 0.051937] Dynamic Preempt: lazy145buildbot # [ 0.052099] rcu: Preemptible hierarchical RCU implementation.146buildbot # [ 0.052099] rcu: RCU event tracing is enabled.147buildbot # [ 0.052100] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.148buildbot # [ 0.052102] Trampoline variant of Tasks RCU enabled.149buildbot # [ 0.052102] Rude variant of Tasks RCU enabled.150buildbot # [ 0.052102] Tracing variant of Tasks RCU enabled.151buildbot # [ 0.052103] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.152buildbot # [ 0.052104] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1153buildbot # [ 0.052125] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.154buildbot # [ 0.052126] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.155buildbot # [ 0.052127] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.156buildbot # [ 0.056560] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16157buildbot # [ 0.056833] rcu: srcu_init: Setting srcu_struct sizes based on contention.158buildbot # [ 0.056839] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns159buildbot # [ 0.056941] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)160buildbot # [ 0.064151] Console: colour VGA+ 80x25161buildbot # [ 0.064154] printk: legacy console [tty0] enabled162buildbot # [ 0.106778] printk: legacy console [ttyS0] enabled163buildbot # [ 0.301351] ACPI: Core revision 20250807164buildbot # [ 0.302897] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns165buildbot # [ 0.305743] APIC: Switch to symmetric I/O mode setup166buildbot # [ 0.307498] x2apic enabled167buildbot # [ 0.308743] APIC: Switched APIC routing to: physical x2apic168buildbot # [ 0.311556] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1169buildbot # [ 0.313365] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns170buildbot # [ 0.316428] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400010)171buildbot # [ 0.318545] x86/cpu: User Mode Instruction Prevention (UMIP) activated172buildbot # [ 0.319582] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127173buildbot # [ 0.320427] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0174buildbot # [ 0.321431] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto175buildbot # [ 0.322427] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl176buildbot # [ 0.323427] Transient Scheduler Attacks: Mitigation: Clear CPU buffers177buildbot # [ 0.325426] Spectre V2 : Mitigation: Enhanced / Automatic IBRS178buildbot # [ 0.327426] Speculative Return Stack Overflow: Mitigation: Safe RET179buildbot # [ 0.328426] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization180buildbot # [ 0.330436] Spectre V2 : Enabling IBPB for BPF181buildbot # [ 0.331428] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier182buildbot # [ 0.333427] active return thunk: srso_alias_return_thunk183buildbot # [ 0.334455] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'184buildbot # [ 0.336426] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'185buildbot # [ 0.337426] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'186buildbot # [ 0.338426] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'187buildbot # [ 0.340426] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'188buildbot # [ 0.342426] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'189buildbot # [ 0.344426] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'190buildbot # [ 0.346426] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'191buildbot # [ 0.348426] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'192buildbot # [ 0.349427] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256193buildbot # [ 0.351426] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64194buildbot # [ 0.352426] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512195buildbot # [ 0.353426] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024196buildbot # [ 0.354426] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8197buildbot # [ 0.355426] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16198buildbot # [ 0.357426] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24199buildbot # [ 0.359426] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.200buildbot # [ 0.395092] Freeing SMP alternatives memory: 44K201buildbot # [ 0.395429] pid_max: default: 32768 minimum: 301202buildbot # [ 0.396557] LSM: initializing lsm=capability,landlock,yama,bpf,ima203buildbot # [ 0.398549] landlock: Up and running.204buildbot # [ 0.399427] Yama: becoming mindful.205buildbot # [ 0.401599] LSM support for eBPF active206buildbot # [ 0.402525] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)207buildbot # [ 0.403455] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)208buildbot # [ 0.406527] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)209buildbot # [ 0.408000] Performance Events: Fam17h+ core perfctr, AMD PMU driver.210buildbot # [ 0.408437] ... version: 2211buildbot # [ 0.409428] ... bit width: 48212buildbot # [ 0.410428] ... generic counters: 6213buildbot # [ 0.411428] ... generic bitmap: 000000000000003f214buildbot # [ 0.412428] ... fixed-purpose counters: 0215buildbot # [ 0.413428] ... fixed-purpose bitmap: 0000000000000000216buildbot # [ 0.414428] ... value mask: 0000ffffffffffff217buildbot # [ 0.415428] ... max period: 00007fffffffffff218buildbot # [ 0.416428] ... global_ctrl mask: 000000000000003f219buildbot # [ 0.417532] signal: max sigframe size: 3376220buildbot # [ 0.418542] rcu: Hierarchical SRCU implementation.221buildbot # [ 0.419433] rcu: Max phase no-delay instances is 400.222buildbot # [ 0.425284] smp: Bringing up secondary CPUs ...223buildbot # [ 0.426451] smp: Brought up 1 node, 1 CPU224buildbot # [ 0.427431] smpboot: Total of 1 processors activated (4800.02 BogoMIPS)225buildbot # [ 0.428637] Memory: 941036K/1048024K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 99608K reserved, 0K cma-reserved)226buildbot # [ 0.429678] devtmpfs: initialized227buildbot # [ 0.430620] x86/mm: Memory block size: 128MB228buildbot # [ 0.432404] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)229buildbot # [ 0.433464] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).230buildbot # [ 0.434518] pinctrl core: initialized pinctrl subsystem231buildbot # [ 0.435852] PM: RTC time: 07:50:36, date: 2026-08-30232buildbot # [ 0.439475] NET: Registered PF_NETLINK/PF_ROUTE protocol family233buildbot # [ 0.440833] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations234buildbot # [ 0.441451] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations235buildbot # [ 0.442589] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations236buildbot # [ 0.443440] audit: initializing netlink subsys (disabled)237buildbot # [ 0.444698] thermal_sys: Registered thermal governor 'fair_share'238buildbot # [ 0.444701] thermal_sys: Registered thermal governor 'bang_bang'239buildbot # [ 0.445429] thermal_sys: Registered thermal governor 'step_wise'240buildbot # [ 0.446432] audit: type=2000 audit(1788076236.462:1): state=initialized audit_enabled=0 res=1241buildbot # [ 0.448432] thermal_sys: Registered thermal governor 'user_space'242buildbot # [ 0.448435] thermal_sys: Registered thermal governor 'power_allocator'243buildbot # [ 0.449463] cpuidle: using governor menu244buildbot # [ 0.452675] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5245buildbot # [ 0.453776] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]246buildbot # [ 0.454431] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry247buildbot # [ 0.455442] PCI: Using configuration type 1 for base access248buildbot # [ 0.456654] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.249buildbot # [ 0.461720] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages250buildbot # [ 0.462429] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page251buildbot # [ 0.467428] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages252buildbot # [ 0.468428] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page253buildbot # [ 0.478798] ACPI: Added _OSI(Module Device)254buildbot # [ 0.479429] ACPI: Added _OSI(Processor Device)255buildbot # [ 0.484428] ACPI: Added _OSI(Processor Aggregator Device)256buildbot # [ 0.490018] ACPI: 1 ACPI AML tables successfully acquired and loaded257buildbot # [ 0.493582] ACPI: Interpreter enabled258buildbot # [ 0.494446] ACPI: PM: (supports S0 S3 S4 S5)259buildbot # [ 0.497428] ACPI: Using IOAPIC for interrupt routing260buildbot # [ 0.498496] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug261buildbot # [ 0.501428] PCI: Using E820 reservations for host bridge windows262buildbot # [ 0.502582] ACPI: Enabled 2 GPEs in block 00 to 3F263buildbot # [ 0.511230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])264buildbot # [ 0.512434] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]265buildbot # [ 0.513510] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]266buildbot # [ 0.514558] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]267buildbot # [ 0.516430] PCI host bridge to bus 0000:00268buildbot # [ 0.517436] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]269buildbot # [ 0.518430] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]270buildbot # [ 0.519429] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]271buildbot # [ 0.520429] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]272buildbot # [ 0.521429] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]273buildbot # [ 0.522429] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]274buildbot # [ 0.523439] pci_bus 0000:00: root bus resource [bus 00-ff]275buildbot # [ 0.524617] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint276buildbot # [ 0.526386] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint277buildbot # [ 0.529532] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]278buildbot # [ 0.530457] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]279buildbot # [ 0.531481] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]280buildbot # [ 0.532658] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]281buildbot # [ 0.535446] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint282buildbot # [ 0.538470] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f]283buildbot # [ 0.539443] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]284buildbot # [ 0.541481] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]285buildbot # [ 0.542469] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]286buildbot # [ 0.544667] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint287buildbot # [ 0.547470] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f]288buildbot # [ 0.548443] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]289buildbot # [ 0.549481] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]290buildbot # [ 0.551649] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint291buildbot # [ 0.554469] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf]292buildbot # [ 0.555443] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]293buildbot # [ 0.556480] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]294buildbot # [ 0.558649] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint295buildbot # [ 0.561468] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f]296buildbot # [ 0.562443] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]297buildbot # [ 0.563491] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]298buildbot # [ 0.566343] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint299buildbot # [ 0.569460] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf]300buildbot # [ 0.570443] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]301buildbot # [ 0.571490] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]302buildbot # [ 0.573650] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint303buildbot # [ 0.576467] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f]304buildbot # [ 0.577444] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]305buildbot # [ 0.578494] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]306buildbot # [ 0.581748] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint307buildbot # [ 0.584468] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df]308buildbot # [ 0.585443] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]309buildbot # [ 0.586482] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]310buildbot # [ 0.587443] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref]311buildbot # [ 0.589637] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint312buildbot # [ 0.592048] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]313buildbot # [ 0.593481] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]314buildbot # [ 0.595669] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint315buildbot # [ 0.598479] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff]316buildbot # [ 0.599444] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]317buildbot # [ 0.600481] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]318buildbot # [ 0.602649] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint319buildbot # [ 0.605429] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff]320buildbot # [ 0.606443] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]321buildbot # [ 0.607481] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]322buildbot # [ 0.609704] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint323buildbot # [ 0.613083] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f]324buildbot # [ 0.613931] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint325buildbot # [ 0.616225] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f]326buildbot # [ 0.617973] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint327buildbot # [ 0.619505] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f]328buildbot # [ 0.620832] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint329buildbot # [ 0.622468] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]330buildbot # [ 0.623915] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint331buildbot # [ 0.625121] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO332buildbot # [ 0.626891] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint333buildbot # [ 0.629332] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f]334buildbot # [ 0.630442] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]335buildbot # [ 0.632096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint336buildbot # [ 0.634513] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]337buildbot # [ 0.641714] ACPI: PCI: Interrupt link LNKA configured for IRQ 10338buildbot # [ 0.642588] ACPI: PCI: Interrupt link LNKB configured for IRQ 10339buildbot # [ 0.643601] ACPI: PCI: Interrupt link LNKC configured for IRQ 11340buildbot # [ 0.644586] ACPI: PCI: Interrupt link LNKD configured for IRQ 11341buildbot # [ 0.645591] ACPI: PCI: Interrupt link LNKE configured for IRQ 10342buildbot # [ 0.646600] ACPI: PCI: Interrupt link LNKF configured for IRQ 10343buildbot # [ 0.647601] ACPI: PCI: Interrupt link LNKG configured for IRQ 11344buildbot # [ 0.648580] ACPI: PCI: Interrupt link LNKH configured for IRQ 11345buildbot # [ 0.649493] ACPI: PCI: Interrupt link GSIA configured for IRQ 16346buildbot # [ 0.650451] ACPI: PCI: Interrupt link GSIB configured for IRQ 17347buildbot # [ 0.651450] ACPI: PCI: Interrupt link GSIC configured for IRQ 18348buildbot # [ 0.652445] ACPI: PCI: Interrupt link GSID configured for IRQ 19349buildbot # [ 0.653451] ACPI: PCI: Interrupt link GSIE configured for IRQ 20350buildbot # [ 0.654445] ACPI: PCI: Interrupt link GSIF configured for IRQ 21351buildbot # [ 0.655445] ACPI: PCI: Interrupt link GSIG configured for IRQ 22352buildbot # [ 0.656447] ACPI: PCI: Interrupt link GSIH configured for IRQ 23353buildbot # [ 0.658621] iommu: Default domain type: Translated354buildbot # [ 0.659439] iommu: DMA domain TLB invalidation policy: lazy mode355buildbot # [ 0.660721] ACPI: bus type USB registered356buildbot # [ 0.661517] usbcore: registered new interface driver usbfs357buildbot # [ 0.662446] usbcore: registered new interface driver hub358buildbot # [ 0.663456] usbcore: registered new device driver usb359buildbot # [ 0.665453] NetLabel: Initializing360buildbot # [ 0.666428] NetLabel: domain hash size = 128361buildbot # [ 0.667428] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO362buildbot # [ 0.668514] NetLabel: unlabeled traffic allowed by default363buildbot # [ 0.669441] PCI: Using ACPI for IRQ routing364buildbot # [ 0.776047] pci 0000:00:01.0: vgaarb: setting as boot VGA device365buildbot # [ 0.776423] pci 0000:00:01.0: vgaarb: bridge control possible366buildbot # [ 0.776423] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none367buildbot # [ 0.776432] vgaarb: loaded368buildbot # [ 0.777609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0369buildbot # [ 0.778428] hpet0: 3 comparators, 64-bit 100.000000 MHz counter370buildbot # [ 0.782532] clocksource: Switched to clocksource kvm-clock371buildbot # [ 0.787039] VFS: Disk quotas dquot_6.6.0372buildbot # [ 0.788319] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)373buildbot # [ 0.790643] pnp: PnP ACPI init374buildbot # [ 0.791915] ACPI: IRQ 4 override to edge(!), high(!)375buildbot # [ 0.793615] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved376buildbot # [ 0.796222] pnp: PnP ACPI: found 6 devices377buildbot # [ 0.804406] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns378buildbot # [ 0.806994] clocksource: Switched to clocksource acpi_pm379buildbot # [ 0.808754] NET: Registered PF_INET protocol family380buildbot # [ 0.810477] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)381buildbot # [ 0.828865] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)382buildbot # [ 0.831495] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)383buildbot # [ 0.833852] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)384buildbot # [ 0.836189] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)385buildbot # [ 0.838352] TCP: Hash tables configured (established 8192 bind 8192)386buildbot # [ 0.840327] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)387buildbot # [ 0.842701] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)388buildbot # [ 0.844707] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)389buildbot # [ 0.846838] NET: Registered PF_UNIX/PF_LOCAL protocol family390buildbot # [ 0.848675] NET: Registered PF_XDP protocol family391buildbot # [ 0.850187] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]392buildbot # [ 0.852006] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]393buildbot # [ 0.853842] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]394buildbot # [ 0.855864] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]395buildbot # [ 0.857894] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]396buildbot # [ 0.859911] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]397buildbot # [ 0.862697] ACPI: \_SB_.GSIA: Enabled at IRQ 16398buildbot # [ 0.865533] ACPI: \_SB_.GSIB: Enabled at IRQ 17399buildbot # [ 0.868382] ACPI: \_SB_.GSIC: Enabled at IRQ 18400buildbot # [ 0.871289] ACPI: \_SB_.GSID: Enabled at IRQ 19401buildbot # [ 0.873960] PCI: CLS 0 bytes, default 64402buildbot # [ 0.875574] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns403buildbot # [ 0.878705] Trying to unpack rootfs image as initramfs...404buildbot # [ 0.927081] Initialise system trusted keyrings405buildbot # [ 0.928813] workingset: timestamp_bits=40 max_order=18 bucket_order=0406buildbot # [ 0.954088] Key type asymmetric registered407buildbot # [ 0.955466] Asymmetric key parser 'x509' registered408buildbot # [ 0.960675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)409buildbot # [ 0.966684] io scheduler mq-deadline registered410buildbot # [ 0.968120] io scheduler kyber registered411buildbot # [ 0.972279] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled412buildbot # [ 0.974565] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A413buildbot # [ 0.984176] Linux agpgart interface v0.103414buildbot # [ 0.985564] ACPI: bus type drm_connector registered415buildbot # [ 0.991124] usbcore: registered new interface driver usbserial_generic416buildbot # [ 0.993064] usbserial: USB Serial support registered for generic417buildbot # [ 0.997632] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.418buildbot # [ 0.997632] Please enable it if your BIOS has the CPPC option.419buildbot # [ 1.008639] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled420buildbot # [ 1.011011] drop_monitor: Initializing network drop monitor service421buildbot # [ 1.017793] NET: Registered PF_INET6 protocol family422buildbot # [ 1.022982] Segment Routing with IPv6423buildbot # [ 1.026643] In-situ OAM (IOAM) with IPv6424buildbot # [ 1.028278] IPI shorthand broadcast: enabled425buildbot # [ 1.037188] sched_clock: Marking stable (784029707, 252585118)->(1244010036, -207395211)426buildbot # [ 1.044848] registered taskstats version 1427buildbot # [ 1.046409] Loading compiled-in X.509 certificates428buildbot # [ 1.068400] Demotion targets for Node 0: null429buildbot # [ 1.072672] Key type .fscrypt registered430buildbot # [ 1.073940] Key type fscrypt-provisioning registered431buildbot # [ 1.077750] ima: No TPM chip found, activating TPM-bypass!432buildbot # [ 1.079443] ima: Allocated hash algorithm: sha1433buildbot # [ 1.082659] ima: No architecture policies found434buildbot # [ 1.087642] PM: Magic number: 6:795:825435buildbot # [ 1.091915] RAS: Correctable Errors collector initialized.436buildbot # [ 1.101459] clk: Disabling unused clocks437buildbot # [ 1.104644] PM: genpd: Disabling unused power domains438buildbot # [ 1.241823] Freeing initrd memory: 29084K439buildbot # [ 1.245763] Freeing unused decrypted memory: 2028K440buildbot # [ 1.249222] Freeing unused kernel image (initmem) memory: 3644K441buildbot # [ 1.251097] Write protecting the kernel read-only data: 32768k442buildbot # [ 1.253876] Freeing unused kernel image (text/rodata gap) memory: 1216K443buildbot # [ 1.256308] Freeing unused kernel image (rodata/data gap) memory: 756K444buildbot # [ 1.312126] x86/mm: Checked W+X mappings: passed, no W+X pages found.445buildbot # [ 1.314073] Run /init as init process446buildbot # [ 1.325562] systemd[1]: Inserted module 'autofs4'447buildbot # [ 1.343319] fuse: init (API version 7.45)448buildbot # [ 1.350029] ACPI: \_SB_.GSIG: Enabled at IRQ 22449buildbot # [ 1.354039] ACPI: \_SB_.GSIH: Enabled at IRQ 23450buildbot # [ 1.359293] ACPI: \_SB_.GSIE: Enabled at IRQ 20451buildbot # [ 1.365127] ACPI: \_SB_.GSIF: Enabled at IRQ 21452buildbot # [ 1.404579] systemd[1]: Successfully made /usr/ read-only.453buildbot # [ 1.744195] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)454buildbot # [ 1.766191] systemd[1]: Detected virtualization kvm.455buildbot # [ 1.770186] systemd[1]: Detected architecture x86-64.456buildbot # [ 1.774230] systemd[1]: Running in initrd.457buildbot # [ 1.778510] systemd[1]: Initializing machine ID from random generator.458buildbot # [ 1.783782] systemd[1]: Hostname set to <buildbot>.459buildbot # [ 2.006246] systemd[1]: bpf-restrict-fs: LSM BPF program attached460buildbot # [ 2.066245] systemd[1]: Queued start job for default target Initrd Default Target.461buildbot # [ 2.072281] systemd[1]: Created slice Slice /system/modprobe.462buildbot # [ 2.074396] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.463buildbot # [ 2.076887] systemd[1]: Expecting device /dev/disk/by-label/nixos...464buildbot # [ 2.078955] systemd[1]: Reached target Path Units.465buildbot # [ 2.080561] systemd[1]: Reached target Slice Units.466buildbot # [ 2.082200] systemd[1]: Reached target Swaps.467buildbot # [ 2.083694] systemd[1]: Reached target Timer Units.468buildbot # [ 2.085405] systemd[1]: Listening on D-Bus System Message Bus Socket.469buildbot # [ 2.087565] systemd[1]: Listening on Journal Socket (/dev/log).470buildbot # [ 2.089735] systemd[1]: Listening on Journal Sockets.471buildbot # [ 2.091496] systemd[1]: Listening on udev Control Socket.472buildbot # [ 2.093343] systemd[1]: Listening on udev Kernel Socket.473buildbot # [ 2.095080] systemd[1]: Reached target Socket Units.474buildbot # [ 2.110052] systemd[1]: Starting Create List of Static Device Nodes...475buildbot # [ 2.115996] systemd[1]: Starting Load Kernel Module 9pnet_virtio...476buildbot # [ 2.128280] systemd[1]: Starting Load Kernel Module configfs...477buildbot # [ 2.140832] systemd[1]: Starting Journal Service...478buildbot # [ 2.159715] systemd[1]: Starting Load Kernel Modules...479buildbot # [ 2.166917] netfs: FS-Cache loaded480buildbot # [ 2.168169] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os481buildbot # [ 2.180836] systemd[1]: Starting Coldplug All udev Devices...482buildbot # [ 2.185820] 9pnet: Installing 9P2000 support483buildbot # [ 2.210056] systemd[1]: Finished Create List of Static Device Nodes.484buildbot # [ 2.214047] systemd-journald[67]: Collecting audit messages is disabled.485buildbot # [ 2.220432] systemd[1]: modprobe@configfs.service: Deactivated successfully.486buildbot # [ 2.232297] systemd[1]: Finished Load Kernel Module configfs.487buildbot # [ 2.238469] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.488buildbot # [ 2.245211] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.489buildbot # [ 2.253719] systemd[1]: Finished Load Kernel Module 9pnet_virtio.490buildbot # [ 2.257693] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev491buildbot # [ 2.263454] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config492buildbot # [ 2.284863] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...493buildbot # [ 2.304993] systemd[1]: Finished Load Kernel Modules.494buildbot # [ 2.317060] systemd[1]: Starting Apply Kernel Variables...495buildbot # [ 2.335319] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.496buildbot # [ 2.351031] systemd[1]: Starting Create Static Device Nodes in /dev...497buildbot # [ 2.368806] systemd[1]: Finished Apply Kernel Variables.498buildbot # [ 2.390711] systemd[1]: Finished Create Static Device Nodes in /dev.499buildbot # [ 2.398029] systemd[1]: Reached target Preparation for Local File Systems.500buildbot # [ 2.404778] systemd[1]: Reached target Local File Systems.501buildbot # [ 2.413957] systemd[1]: Starting Rule-based Manager for Device Events and Files...502buildbot # [ 2.169786] systemd-modules-load[68]: Inserted module 'dm_mod'503buildbot # [ 2.174818] systemd-modules-load[68]: Inserted module 'virtio_balloon'504buildbot # [ 2.178444] systemd-modules-load[68]: Inserted module 'virtio_gpu'505buildbot # [ 2.435880] systemd[1]: Started Journal Service.506buildbot # [ 2.206656] systemd[1]: Starting Create System Files and Directories...507buildbot # [ 2.239490] systemd-udevd[75]: Using default interface naming scheme 'v261'.508buildbot # [ 2.243542] systemd[1]: Finished Create System Files and Directories.509buildbot # [ 2.279107] systemd[1]: Started Rule-based Manager for Device Events and Files.510buildbot # [ 2.323171] systemd[1]: Finished Coldplug All udev Devices.511buildbot # [ 2.324754] systemd[1]: Reached target System Initialization.512buildbot # [ 2.326331] systemd[1]: Reached target Basic System.513buildbot # [ 2.871429] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12514buildbot # [ 2.882184] virtio_blk virtio5: 1/0/0 default/read/poll queues515buildbot # [ 2.908282] serio: i8042 KBD port at 0x60,0x64 irq 1516buildbot # [ 2.909543] serio: i8042 AUX port at 0x60,0x64 irq 12517buildbot # [ 2.917188] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)518buildbot # [ 2.923128] ehci-pci 0000:00:1d.7: EHCI Host Controller519buildbot # [ 2.924371] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1520buildbot # [ 2.929096] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000521buildbot # [ 2.935659] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00522buildbot # [ 2.938047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18523buildbot # [ 2.939928] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1524buildbot # [ 2.945624] usb usb1: Product: EHCI Host Controller525buildbot # [ 2.948623] usb usb1: Manufacturer: Linux 6.18.48 ehci_hcd526buildbot # [ 2.952666] usb usb1: SerialNumber: 0000:00:1d.7527buildbot # [ 2.954147] hub 1-0:1.0: USB hub found528buildbot # [ 2.956631] hub 1-0:1.0: 6 ports detected529buildbot # [ 2.958840] SCSI subsystem initialized530buildbot # [ 2.963124] uhci_hcd 0000:00:1d.0: UHCI Host Controller531buildbot # [ 2.964368] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2532buildbot # [ 2.984642] uhci_hcd 0000:00:1d.0: detected 2 ports533buildbot # [ 2.986027] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200534buildbot # [ 3.009663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18535buildbot # [ 3.011622] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1536buildbot # [ 3.040014] usb usb2: Product: UHCI Host Controller537buildbot # [ 2.797102] systemd[1]: Starting Virtual Console Setup...538buildbot # [ 2.802844] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line.539buildbot # [ 3.057388] usb usb2: Manufacturer: Linux 6.18.48 uhci_hcd540buildbot # [ 2.814818] (udev-worker)[92]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.541buildbot # [ 2.819264] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line.542buildbot # [ 3.075260] usb usb2: SerialNumber: 0000:00:1d.0543buildbot # [ 3.082774] hub 2-0:1.0: USB hub found544buildbot # [ 3.098705] hub 2-0:1.0: 2 ports detected545buildbot # [ 2.866314] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones.546buildbot # [ 2.871735] systemd[1]: Finished Virtual Console Setup.547buildbot # [ 3.127018] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0548buildbot # [ 3.132470] uhci_hcd 0000:00:1d.1: UHCI Host Controller549buildbot # [ 3.148773] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3550buildbot # [ 2.908179] systemd[1]: Found device /dev/disk/by-label/nixos.551buildbot # [ 2.909809] systemd[1]: Reached target Initrd Root Device.552buildbot # [ 3.165755] uhci_hcd 0000:00:1d.1: detected 2 ports553buildbot # [ 2.915427] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...554buildbot # [ 3.170768] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode555buildbot # [ 3.175138] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220556buildbot # [ 3.177318] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18557buildbot # [ 3.181636] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)558buildbot # [ 3.185482] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1559buildbot # [ 3.189646] ahci 0000:00:1f.2: flags: 64bit ncq only560buildbot # [ 3.193761] usb usb3: Product: UHCI Host Controller561buildbot # [ 3.197627] usb 1-1: new high-speed USB device number 2 using ehci-pci562buildbot # [ 3.201645] usb usb3: Manufacturer: Linux 6.18.48 uhci_hcd563buildbot # [ 3.207814] scsi host0: ahci564buildbot # [ 2.957867] systemd-fsck[109]: nixos: clean, 12/65536 files, 13019/262144 blocks565buildbot # [ 3.212630] usb usb3: SerialNumber: 0000:00:1d.1566buildbot # [ 3.214752] scsi host1: ahci567buildbot # [ 2.967155] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.568buildbot # [ 2.971235] systemd[1]: Mounting /sysroot...569buildbot # [ 3.227850] hub 3-0:1.0: USB hub found570buildbot # [ 3.231241] scsi host2: ahci571buildbot # [ 3.236146] hub 3-0:1.0: 2 ports detected572buildbot # [ 3.240855] scsi host3: ahci573buildbot # [ 3.253156] scsi host4: ahci574buildbot # [ 3.254979] uhci_hcd 0000:00:1d.2: UHCI Host Controller575buildbot # [ 3.262947] scsi host5: ahci576buildbot # [ 3.270212] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1577buildbot # [ 3.277111] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4578buildbot # [ 3.283134] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1579buildbot # [ 3.288003] uhci_hcd 0000:00:1d.2: detected 2 ports580buildbot # [ 3.291944] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240581buildbot # [ 3.295697] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1582buildbot # [ 3.300014] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18583buildbot # [ 3.305173] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1584buildbot # [ 3.309696] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1585buildbot # [ 3.313839] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1586buildbot # [ 3.317699] usb usb4: Product: UHCI Host Controller587buildbot # [ 3.321696] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1588buildbot # [ 3.325747] usb usb4: Manufacturer: Linux 6.18.48 uhci_hcd589buildbot # [ 3.336635] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00590buildbot # [ 3.338613] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10591buildbot # [ 3.344618] usb 1-1: Product: QEMU USB Tablet592buildbot # [ 3.348729] usb usb4: SerialNumber: 0000:00:1d.2593buildbot # [ 3.350056] usb 1-1: Manufacturer: QEMU594buildbot # [ 3.351205] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1595buildbot # [ 3.355676] hub 4-0:1.0: USB hub found596buildbot # [ 3.359860] hub 4-0:1.0: 2 ports detected597buildbot # [ 3.384177] hid: raw HID events driver (C) Jiri Kosina598buildbot # [ 3.644745] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)599buildbot # [ 3.646455] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100600buildbot # [ 3.648213] ata3.00: applying bridge limits601buildbot # [ 3.650007] ata3.00: configured for UDMA/100602buildbot # [ 3.651896] ata4: SATA link down (SStatus 0 SControl 300)603buildbot # [ 3.653637] ata6: SATA link down (SStatus 0 SControl 300)604buildbot # [ 3.655436] ata1: SATA link down (SStatus 0 SControl 300)605buildbot # [ 3.657243] ata2: SATA link down (SStatus 0 SControl 300)606buildbot # [ 3.659141] ata5: SATA link down (SStatus 0 SControl 300)607buildbot # [ 3.661801] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5608buildbot # [ 3.682456] EXT4-fs (vda): mounted filesystem 7f5a9249-9708-40b4-b936-683a80fdcb91 r/w with ordered data mode. Quota mode: none.609buildbot # [ 3.439559] systemd[1]: Mounted /sysroot.610buildbot # [ 3.445100] systemd[1]: Reached target Initrd Root File System.611buildbot # [ 3.447540] systemd[1]: Starting Mountpoints Configured in the Real Root...612buildbot # [ 3.469451] systemd-sysroot-fstab-check[140]: /sysroot should be mounted in the initrd, will request daemon-reload.613buildbot # [ 3.475463] systemd[1]: Reload requested from client PID 140 ('systemd-sysroot') (unit initrd-parse-etc.service)...614buildbot # [ 3.478244] systemd[1]: Reloading...615buildbot # [ 3.750784] usbcore: registered new interface driver usbhid616buildbot # [ 3.769648] usbhid: USB HID core driver617buildbot # [ 3.813506] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2618buildbot # [ 3.820260] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray619buildbot # [ 3.823690] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0620buildbot # [ 3.842775] cdrom: Uniform CD-ROM driver Revision: 3.20621buildbot # [ 3.624504] systemd[1]: Reloading finished in 149 ms.622buildbot # [ 3.636731] systemd-sysroot-fstab-check[140]: Requesting initrd-fs.target/start/replace...623buildbot # [ 3.644306] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio624buildbot # [ 3.647153] systemd-sysroot-fstab-check[140]: Requesting swap.target/start/replace...625buildbot # [ 3.653771] systemd[1]: initrd-parse-etc.service: Deactivated successfully.626buildbot # [ 3.656587] systemd[1]: Finished Mountpoints Configured in the Real Root.627buildbot # [ 3.658517] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.628buildbot # [ 3.955881] systemd[1]: Mounting /sysroot/nix/.ro-store...629buildbot # [ 3.966272] systemd[1]: Mounting /sysroot/nix/.rw-store...630buildbot # [ 3.976247] systemd[1]: Mounting /sysroot/run...631buildbot # [ 3.990911] systemd[1]: Mounting /sysroot/tmp/shared...632buildbot # [ 4.006192] systemd[1]: Mounting /sysroot/tmp/xchg...633buildbot # [ 4.298817] 9p: Installing v9fs 9p2000 file system support634buildbot # [ 4.050958] systemd[1]: Mounted /sysroot/nix/.rw-store.635buildbot # [ 4.052876] systemd[1]: Mounted /sysroot/run.636buildbot # [ 4.062184] systemd[1]: Mounted /sysroot/nix/.ro-store.637buildbot # [ 4.063953] systemd[1]: Mounted /sysroot/tmp/shared.638buildbot # [ 4.065661] systemd[1]: Mounted /sysroot/tmp/xchg.639buildbot # [ 4.071132] systemd[1]: Starting rw-sysroot-nix-store.service...640buildbot # [ 4.083469] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.641buildbot # [ 4.086510] systemd[1]: Finished rw-sysroot-nix-store.service.642buildbot # [ 4.956521] systemd[1]: Mounting /sysroot/nix/store...643buildbot # [ 5.010951] systemd[1]: Mounted /sysroot/nix/store.644buildbot # [ 5.013350] systemd[1]: Reached target Initrd File Systems.645buildbot # [ 5.016776] systemd[1]: Starting Find NixOS closure...646buildbot # [ 5.023679] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...647buildbot # [ 5.047194] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.648buildbot # [ 5.051196] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.649buildbot # [ 5.061144] systemd[1]: Finished Find NixOS closure.650buildbot # [ 5.063274] systemd[1]: Reached target Initrd Default Target.651buildbot # [ 5.065721] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...652buildbot # [ 5.081718] systemd[1]: Stopped target Initrd Default Target.653buildbot # [ 5.083656] systemd[1]: Stopped target Basic System.654buildbot # [ 5.085549] systemd[1]: Stopped target Initrd Root Device.655buildbot # [ 5.088197] systemd[1]: Stopped target Path Units.656buildbot # [ 5.089699] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.657buildbot # [ 5.091587] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.658buildbot # [ 5.093533] systemd[1]: Stopped target Slice Units.659buildbot # [ 5.095240] systemd[1]: Stopped target Socket Units.660buildbot # [ 5.097233] systemd[1]: Stopped target System Initialization.661buildbot # [ 5.099234] systemd[1]: Stopped target Swaps.662buildbot # [ 5.101341] systemd[1]: Stopped target Timer Units.663buildbot # [ 5.102738] systemd[1]: dbus.socket: Deactivated successfully.664buildbot # [ 5.104990] systemd[1]: Closed D-Bus System Message Bus Socket.665buildbot # [ 5.106628] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.666buildbot # [ 5.108850] systemd[1]: Stopped Find NixOS closure.667buildbot # [ 5.111303] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio668buildbot # [ 5.114090] systemd[1]: Starting rw-sysroot-nix-store.service...669buildbot # [ 5.115677] systemd[1]: systemd-sysctl.service: Deactivated successfully.670buildbot # [ 5.118340] systemd[1]: Stopped Apply Kernel Variables.671buildbot # [ 5.119778] systemd[1]: systemd-modules-load.service: Deactivated successfully.672buildbot # [ 5.123190] systemd[1]: Stopped Load Kernel Modules.673buildbot # [ 5.124599] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.674buildbot # [ 5.126559] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.675buildbot # [ 5.128695] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.676buildbot # [ 5.130764] systemd[1]: Stopped Create System Files and Directories.677buildbot # [ 5.132948] systemd[1]: Stopped target Local File Systems.678buildbot # [ 5.135751] systemd[1]: Stopped target Preparation for Local File Systems.679buildbot # [ 5.138232] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.680buildbot # [ 5.140690] systemd[1]: Stopped Coldplug All udev Devices.681buildbot # [ 5.142552] systemd[1]: Stopping Rule-based Manager for Device Events and Files...682buildbot # [ 5.145437] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.683buildbot # [ 5.149508] systemd[1]: Stopped Virtual Console Setup.684buildbot # [ 5.159241] systemd[1]: initrd-cleanup.service: Deactivated successfully.685buildbot # [ 5.164140] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.686buildbot # [ 5.167791] systemd[1]: systemd-udevd.service: Deactivated successfully.687buildbot # [ 5.170971] systemd[1]: Stopped Rule-based Manager for Device Events and Files.688buildbot # [ 5.173753] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.689buildbot # [ 5.176318] systemd[1]: Finished rw-sysroot-nix-store.service.690buildbot # [ 5.180801] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.691buildbot # [ 5.182752] systemd[1]: Closed udev Control Socket.692buildbot # [ 5.185217] systemd[1]: Starting Cleanup udev Database...693buildbot # [ 5.186751] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.694buildbot # [ 5.189200] systemd[1]: Stopped Create Static Device Nodes in /dev.695buildbot # [ 5.191234] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.696buildbot # [ 5.194234] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.697buildbot # [ 5.196092] systemd[1]: kmod-static-nodes.service: Deactivated successfully.698buildbot # [ 5.197802] systemd[1]: Stopped Create List of Static Device Nodes.699buildbot # [ 5.214257] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.700buildbot # [ 5.216954] systemd[1]: Finished Cleanup udev Database.701buildbot # [ 5.219449] systemd[1]: Reached target Switch Root.702buildbot # [ 5.221932] systemd[1]: Starting NixOS Activation...703buildbot # [ 5.381220] initrd-nixos-activation-start[194]: booting system configuration /nix/store/ncv9ff1db73m4kx48m8dfc4k1l1rj549-nixos-system-buildbot-test704buildbot # [ 5.443971] initrd-nixos-activation-start[194]: running activation script...705buildbot # [ 5.850659] initrd-nixos-activation-start[217]: setting up /etc...706buildbot # [ 6.124197] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.707buildbot # [ 6.127112] systemd[1]: Finished NixOS Activation.708buildbot # [ 6.129900] systemd[1]: Starting Switch Root...709buildbot # [ 6.144316] systemd[1]: Switching root.710buildbot # [ 6.528517] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).711buildbot # [ 6.692244] NET: Registered PF_VSOCK protocol family712buildbot # [ 7.081129] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)713buildbot # [ 7.097555] systemd[1]: Detected virtualization kvm.714buildbot # [ 7.100709] systemd[1]: Detected architecture x86-64.715buildbot # [ 7.103904] systemd[1]: Detected first boot.716buildbot # [ 7.111196] systemd[1]: Initializing machine ID from random generator.717buildbot # [ 7.250068] systemd[1]: bpf-restrict-fs: LSM BPF program attached718buildbot # [ 7.386286] systemd[1]: Applying preset policy.719buildbot # [ 7.917335] systemd[1]: Populated /etc with preset unit settings.720buildbot # [ 8.481783] systemd[1]: initrd-switch-root.service: Deactivated successfully.721buildbot # [ 8.484167] systemd[1]: Stopped initrd-switch-root.service.722buildbot # [ 8.488125] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.723buildbot # [ 8.491288] systemd[1]: Created slice Slice /system/getty.724buildbot # [ 8.493392] systemd[1]: Created slice User and Session Slice.725buildbot # [ 8.495039] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.726buildbot # [ 8.497073] systemd[1]: Started Forward Password Requests to Wall Directory Watch.727buildbot # [ 8.511126] systemd[1]: Expecting device /dev/hvc0...728buildbot # [ 8.512378] systemd[1]: Expecting device /dev/ttyS0...729buildbot # [ 8.513779] systemd[1]: Reached target Local Encrypted Volumes.730buildbot # [ 8.515247] systemd[1]: Stopped target initrd-fs.target.731buildbot # [ 8.516634] systemd[1]: Stopped target initrd-root-fs.target.732buildbot # [ 8.518042] systemd[1]: Stopped target initrd-switch-root.target.733buildbot # [ 8.519614] systemd[1]: Reached target Virtual Machines and Containers.734buildbot # [ 8.521219] systemd[1]: Reached target Path Units.735buildbot # [ 8.522487] systemd[1]: Reached target Remote File Systems.736buildbot # [ 8.523931] systemd[1]: Reached target Slice Units.737buildbot # [ 8.525209] systemd[1]: Reached target Swaps.738buildbot # [ 8.529414] systemd[1]: Listening on Query the User Interactively for a Password.739buildbot # [ 8.534342] systemd[1]: Listening on Process Core Dump Socket.740buildbot # [ 8.538170] systemd[1]: Listening on Credential Encryption/Decryption.741buildbot # [ 8.541867] systemd[1]: Listening on Factory Reset Management.742buildbot # [ 8.543461] systemd[1]: Listening on Hostname Service Socket.743buildbot # [ 8.548403] systemd[1]: Starting Journal Log Access Socket...744buildbot # [ 8.550766] systemd[1]: Listening on Journal Audit Socket.745buildbot # [ 8.554688] systemd[1]: Listening on Console Output Muting Service Socket.746buildbot # [ 8.556757] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.747buildbot # [ 8.559354] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os748buildbot # [ 8.561670] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki749buildbot # [ 8.573502] systemd[1]: Listening on Disk Repartitioning Service Socket.750buildbot # [ 8.575310] systemd[1]: Listening on udev Control Socket.751buildbot # [ 8.576903] systemd[1]: Listening on udev Varlink Socket.752buildbot # [ 8.582090] systemd[1]: Mounting Huge Pages File System...753buildbot # [ 8.586201] systemd[1]: Mounting POSIX Message Queue File System...754buildbot # [ 8.594260] systemd[1]: Mounting Kernel Debug File System...755buildbot # [ 8.601799] systemd[1]: Mounting Kernel Trace File System...756buildbot # [ 8.608180] systemd[1]: Starting Create List of Static Device Nodes...757buildbot # [ 8.614499] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio758buildbot # [ 8.625962] systemd[1]: Starting Load Kernel Module configfs...759buildbot # [ 8.629198] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm760buildbot # [ 8.632029] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore761buildbot # [ 8.637687] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse762buildbot # [ 8.645214] systemd[1]: Mounting FUSE Control File System...763buildbot # [ 8.648296] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67764buildbot # [ 8.686316] systemd[1]: Starting Journal Service...765buildbot # [ 8.710344] systemd[1]: Starting Load Kernel Modules...766buildbot # [ 8.731998] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...767buildbot # [ 8.746859] systemd[1]: Starting Remount Root and Kernel File Systems...768buildbot # [ 8.754761] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os769buildbot # [ 8.771052] systemd-journald[287]: Collecting audit messages is enabled.770buildbot # [ 8.773650] systemd[1]: Starting Coldplug All udev Devices...771buildbot # [ 8.803368] systemd[1]: Listening on Journal Log Access Socket.772buildbot # [ 8.811938] systemd[1]: Mounted Huge Pages File System.773buildbot # [ 8.822737] systemd[1]: Mounted POSIX Message Queue File System.774buildbot # [ 8.824778] loop: module loaded775buildbot # [ 8.830679] EXT4-fs (vda): re-mounted 7f5a9249-9708-40b4-b936-683a80fdcb91.776buildbot # [ 8.833759] systemd[1]: Mounted Kernel Debug File System.777buildbot # [ 8.585542] systemd[1]: Queued start job for default target Multi-User System.778buildbot # [ 8.844422] systemd[1]: Started Journal Service.779buildbot # [ 8.593473] systemd[1]: systemd-journald.service: Deactivated successfully.780buildbot # [ 8.597987] systemd-modules-load[288]: Inserted module 'loop'781buildbot # [ 8.611259] systemd[1]: Mounted Kernel Trace File System.782buildbot # [ 8.614131] systemd-modules-load[288]: Inserted module 'tls'783buildbot # [ 8.616741] systemd[1]: Finished Create List of Static Device Nodes.784buildbot # [ 8.623187] systemd[1]: modprobe@configfs.service: Deactivated successfully.785buildbot # [ 8.627462] systemd[1]: Finished Load Kernel Module configfs.786buildbot # [ 8.630749] systemd[1]: Mounted FUSE Control File System.787buildbot # [ 8.632745] systemd[1]: Finished Remount Root and Kernel File Systems.788buildbot # [ 8.640130] systemd[1]: Finished Load Kernel Modules.789buildbot # [ 8.659335] systemd[1]: Listening on Disk Image Download Service Socket.790buildbot # [ 8.668831] systemd[1]: Mounting Kernel Configuration File System...791buildbot # [ 8.673546] systemd-oomd[290]: No swap; memory pressure usage will be degraded792buildbot # [ 8.679159] systemd[1]: Starting Flush Journal to Persistent Storage...793buildbot # [ 8.682190] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore794buildbot # [ 8.695952] systemd[1]: Starting Load/Save OS Random Seed...795buildbot # [ 8.706171] systemd[1]: Starting Apply Kernel Variables...796buildbot # [ 8.728127] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...797buildbot # [ 8.730101] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os798buildbot # [ 8.738146] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.799buildbot # [ 9.005639] systemd-journald[287]: Received client request to flush runtime journal.800buildbot # [ 8.969922] systemd[1]: Mounted Kernel Configuration File System.801buildbot # [ 8.974275] systemd[1]: Finished Load/Save OS Random Seed.802buildbot # [ 8.977465] systemd[1]: Reached target First Boot Complete.803buildbot # [ 8.981176] systemd[1]: Finished Apply Kernel Variables.804buildbot # [ 8.984639] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.805buildbot # [ 8.986667] systemd[1]: Starting Create Static Device Nodes in /dev...806buildbot # [ 8.989899] systemd[1]: Finished Flush Journal to Persistent Storage.807buildbot # [ 9.004219] systemd[1]: Finished Create Static Device Nodes in /dev.808buildbot # [ 9.006121] systemd[1]: Reached target Preparation for Local File Systems.809buildbot # [ 9.011658] systemd[1]: Starting Rule-based Manager for Device Events and Files...810buildbot # [ 9.082903] systemd[1]: Finished Coldplug All udev Devices.811buildbot # [ 9.099885] systemd-udevd[319]: Using default interface naming scheme 'v261'.812buildbot # [ 9.213434] systemd[1]: Started Rule-based Manager for Device Events and Files.813buildbot # [ 9.235246] systemd[1]: Mounting /run/wrappers...814buildbot # [ 9.268117] systemd[1]: Mounted /run/wrappers.815buildbot # [ 9.270385] systemd[1]: Reached target Local File Systems.816buildbot # [ 9.275200] systemd[1]: Listening on Boot Loader Control Service Socket.817buildbot # [ 9.279100] systemd[1]: Starting register-nix-paths.service...818buildbot # [ 9.285556] systemd[1]: Starting Create SUID/SGID Wrappers...819buildbot # [ 9.287119] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.820buildbot # [ 9.300105] systemd[1]: Starting Save Transient machine-id to Disk...821buildbot # [ 9.314427] systemd[1]: Starting Create System Files and Directories...822buildbot # [ 9.375662] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.823buildbot # [ 9.384883] systemd[1]: Finished Save Transient machine-id to Disk.824buildbot # [ 9.465407] systemd[1]: Finished Create System Files and Directories.825buildbot # [ 9.475957] systemd[1]: Starting Rebuild Journal Catalog...826buildbot # [ 9.487651] systemd[1]: Starting Record System Boot/Shutdown in UTMP...827buildbot # [ 9.576643] systemd[1]: Finished Record System Boot/Shutdown in UTMP.828buildbot # [ 9.628401] systemd[1]: Finished Rebuild Journal Catalog.829buildbot # [ 9.637765] systemd[1]: Starting Update is Completed...830buildbot # [ 9.680720] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse831buildbot # [ 9.700585] systemd[1]: Finished Update is Completed.832buildbot # [ 9.860155] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.833buildbot # [ 9.923864] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.834buildbot # [ 9.928368] systemd[1]: Finished Create SUID/SGID Wrappers.835buildbot # [ 9.937752] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.836buildbot # [ 9.974651] (udev-worker)[342]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.837buildbot # [ 9.979436] (udev-worker)[342]: Network interface NamePolicy= disabled on kernel command line.838buildbot # [ 9.983622] (udev-worker)[352]: Network interface NamePolicy= disabled on kernel command line.839buildbot # [ 10.134871] systemd[1]: Condition check resulted in Virtio network device being skipped.840buildbot # [ 10.138061] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore841buildbot # [ 10.146098] systemd[1]: Starting Create SUID/SGID Wrappers...842buildbot # [ 10.148133] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.843buildbot # [ 10.150982] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67844buildbot # [ 10.156433] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore845buildbot # [ 10.159217] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os846buildbot # [ 10.162566] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os847buildbot # [ 10.245146] systemd[1]: Finished register-nix-paths.service.848buildbot # [ 10.587262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3849buildbot # [ 10.598961] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console850buildbot # [ 10.625924] mousedev: PS/2 mouse device common for all mice851buildbot # [ 10.631285] ACPI: button: Power Button [PWRF]852buildbot # [ 10.711722] rtc_cmos 00:04: RTC can wake from S4853buildbot # [ 10.726050] rtc_cmos 00:04: registered as rtc0854buildbot # [ 10.726178] rtc_cmos 00:04: setting system clock to 2026-08-30T07:50:46 UTC (1788076246)855buildbot # [ 10.726317] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs856buildbot # [ 10.726963] systemd-journald[287]: Time jumped backwards, rotating.857buildbot # [ 10.747771] parport_pc 00:02: reported by Plug and Play ACPI858buildbot # [ 10.747934] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]859buildbot # [ 10.757147] Console: switching to colour dummy device 80x25860buildbot # [ 10.803389] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized861buildbot # [ 10.819221] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4862buildbot # [ 10.890122] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt863buildbot # [ 10.890262] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD864buildbot # [ 10.674884] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.865buildbot # [ 10.931222] [drm] Found bochs VGA, ID 0xb0c5.866buildbot # [ 10.931224] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.867buildbot # [ 10.682612] systemd[1]: Finished Create SUID/SGID Wrappers.868buildbot # [ 10.684488] systemd[1]: Reached target System Initialization.869buildbot # [ 10.687114] systemd[1]: Started Discard unused filesystem blocks once a week.870buildbot # [ 10.941385] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic871buildbot # [ 10.942668] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0872buildbot # [ 10.691534] systemd[1]: Started Daily Cleanup of Temporary Directories.873buildbot # [ 10.695328] systemd[1]: Reached target Timer Units.874buildbot # [ 10.696821] systemd[1]: Listening on D-Bus System Message Bus Socket.875buildbot # [ 10.698569] systemd[1]: Listening on Nix Daemon Socket.876buildbot # [ 10.701128] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.877buildbot # [ 10.703375] systemd[1]: Reached target Socket Units.878buildbot # [ 10.707074] systemd[1]: Reached target Basic System.879buildbot # [ 10.708485] systemd[1]: Started backdoor.service.880buildbot # [ 10.715159] systemd[1]: Starting Import lastlog data into lastlog2 database...881buildbot # [ 10.722232] systemd[1]: Starting Name Service Cache Daemon (nsncd)...882buildbot # [ 10.979930] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6883buildbot # [ 10.984094] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5884buildbot # [ 10.738319] systemd[1]: Starting Post-Boot Actions...885buildbot # [ 10.757804] systemd[1]: Started Reset console on configuration changes.886buildbot # [ 10.775368] systemd[1]: Starting resolvconf update...887buildbot # [ 10.821191] systemd[1]: Starting D-Bus System Message Bus...888buildbot # [ 10.851638] systemd[1]: Finished Post-Boot Actions.889buildbot # connecting to host...890buildbot # [ 10.896464] nsncd[477]: Aug 30 07:50:46.919 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"891buildbot # [ 10.903816] systemd[1]: Started Name Service Cache Daemon (nsncd).892buildbot # [ 10.905957] systemd[1]: Reached target Host and Network Name Lookups.893buildbot # [ 10.910277] systemd[1]: Reached target User and Group Name Lookups.894buildbot # [ 10.927674] systemd[1]: Starting User Login Management...895buildbot: Guest shell says: b'Spawning backdoor root shell...\n'896buildbot: connected to guest root shell897buildbot: (connecting took 11.94 seconds)898buildbot: (finished: waiting for the VM to finish booting, in 12.14 seconds)899buildbot # [ 10.960802] systemd[1]: Finished Import lastlog data into lastlog2 database.900buildbot # [ 11.077572] dbus-broker-launch[484]: Looking up NSS user entry for 'systemd-timesync'...901buildbot # [ 11.108655] dbus-broker-launch[484]: NSS returned no entry for 'systemd-timesync'902buildbot # [ 11.110598] dbus-broker-launch[484]: Invalid user-name in /nix/store/dz9q22r9yxs410qcz126w4gdsnvd8zpw-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"903buildbot # [ 11.358346] Console: switching to colour frame buffer device 160x50904buildbot # [ 11.462640] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device905buildbot # [ 11.135321] systemd[1]: Starting Virtual Console Setup...906buildbot # [ 11.216121] systemd[1]: Started D-Bus System Message Bus.907buildbot # [ 11.220221] systemd[1]: Stopped target Host and Network Name Lookups.908buildbot # [ 11.226623] systemd[1]: Stopping Host and Network Name Lookups...909buildbot # [ 11.232300] systemd[1]: Stopped target User and Group Name Lookups.910buildbot # [ 11.235538] systemd[1]: Stopping User and Group Name Lookups...911buildbot # [ 11.240691] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...912buildbot # [ 11.243511] systemd[1]: nscd.service: Deactivated successfully.913buildbot # [ 11.247553] systemd[1]: Stopped Name Service Cache Daemon (nsncd).914buildbot # [ 11.250611] systemd-logind[503]: New seat seat0.915buildbot # [ 11.253514] systemd-logind[503]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)916buildbot # [ 11.257979] dbus-broker-launch[484]: Ready917buildbot # [ 11.261791] systemd-logind[503]: Watching system buttons on /dev/input/event2 (Power Button)918buildbot # [ 11.264569] systemd[1]: Starting Name Service Cache Daemon (nsncd)...919buildbot # [ 11.266747] systemd[1]: Started User Login Management.920buildbot # [ 11.301906] systemd[1]: Starting linger-users.service...921buildbot # [ 11.315695] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.922buildbot # [ 11.321660] systemd[1]: Stopped Virtual Console Setup.923buildbot # [ 11.337469] systemd[1]: Finished resolvconf update.924buildbot # [ 11.348399] systemd[1]: Reached target Preparation for Network.925buildbot # [ 11.360641] systemd[1]: Starting DHCP Client...926buildbot # [ 11.364631] nsncd[568]: Aug 30 07:50:47.386 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"927buildbot # [ 11.372403] systemd[1]: Starting Address configuration of eth1...928buildbot # [ 11.391215] systemd[1]: Starting Extra networking commands....929buildbot # [ 11.664820] ppdev: user-space parallel port driver930buildbot # [ 11.415124] systemd[1]: Starting Virtual Console Setup...931buildbot # [ 11.416822] systemd[1]: Started Name Service Cache Daemon (nsncd).932buildbot # [ 11.422198] systemd[1]: linger-users.service: Deactivated successfully.933buildbot # [ 11.431902] systemd[1]: Finished linger-users.service.934buildbot # [ 11.456551] systemd[1]: Reached target Host and Network Name Lookups.935buildbot # [ 11.461916] systemd[1]: Reached target User and Group Name Lookups.936buildbot # [ 11.780141] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)937buildbot # [ 11.556921] network-addresses-eth1-start[590]: adding address 192.168.1.1/24... done938buildbot # [ 11.583082] network-addresses-eth1-start[590]: adding address 2001:db8:1::1/64... done939buildbot # [ 11.866065] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)940buildbot # [ 11.617534] systemd[1]: Finished Address configuration of eth1.941buildbot # [ 11.664878] systemd-logind[503]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)942buildbot # [ 11.734252] systemd[1]: Finished Extra networking commands..943buildbot # [ 11.739415] dhcpcd[608]: dhcpcd-10.3.2 starting944buildbot # [ 11.746457] systemd[1]: Reached target Network.945buildbot # [ 11.752869] dhcpcd[660]: dev: loaded udev946buildbot # [ 11.759097] systemd[1]: Starting gitea...947buildbot # [ 11.773857] systemd[1]: Starting Nginx Web Server...948buildbot # [ 11.794639] systemd[1]: Starting PostgreSQL Server...949buildbot # [ 11.807482] systemd[1]: Starting Permit User Sessions...950buildbot # [ 12.089324] 8021q: 802.1Q VLAN Support v1.8951buildbot # [ 12.094362] 8021q: adding VLAN 0 to HW filter on device eth1952buildbot # [ 11.871646] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.953buildbot # [ 11.877642] systemd[1]: Stopped Virtual Console Setup.954buildbot # [ 11.901824] systemd[1]: Starting Virtual Console Setup...955buildbot # [ 11.923961] systemd[1]: Finished Permit User Sessions.956buildbot # [ 11.998202] systemd[1]: Started Getty on tty1.957buildbot # [ 12.005417] systemd[1]: Reached target Login Prompts.958buildbot # [ 12.064685] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.959buildbot # [ 12.407448] kvm_amd: TSC scaling supported960buildbot # [ 12.409721] kvm_amd: Nested Virtualization enabled961buildbot # [ 12.419344] kvm_amd: Nested Paging enabled962buildbot # [ 12.436893] kvm_amd: LBR virtualization supported963buildbot # [ 12.439725] kvm_amd: Virtual VMLOAD VMSAVE supported964buildbot # [ 12.443968] kvm_amd: Virtual GIF supported965buildbot # [ 12.446739] kvm_amd: Virtual NMI enabled966buildbot # [ 12.553264] cfg80211: Loading compiled-in X.509 certificates for regulatory database967buildbot # [ 12.345626] nginx-pre-start[681]: nginx: the configuration file /nix/store/fm5b2jl7kjzxkkc7bzkzis1prdivs6hz-nginx.conf syntax is ok968buildbot # [ 12.351402] nginx-pre-start[681]: nginx: configuration file /nix/store/fm5b2jl7kjzxkkc7bzkzis1prdivs6hz-nginx.conf test is successful969buildbot # [ 12.625518] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'970buildbot # [ 12.626705] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'971buildbot # [ 12.380479] postgresql-pre-start[685]: The files belonging to this database system will be owned by user "postgres".972buildbot # [ 12.383110] postgresql-pre-start[685]: This user must also own the server process.973buildbot # [ 12.639892] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2974buildbot # [ 12.643394] EDAC MC: Ver: 3.0.0975buildbot # [ 12.395612] systemd[1]: Started Nginx Web Server.976buildbot # [ 12.649654] cfg80211: failed to load regulatory.db977buildbot # [ 12.402498] postgresql-pre-start[685]: The database cluster will be initialized with locale "en_US.UTF-8".978buildbot # [ 12.406392] postgresql-pre-start[685]: The default database encoding has accordingly been set to "UTF8".979buildbot # [ 12.411173] postgresql-pre-start[685]: The default text search configuration will be set to "english".980buildbot # [ 12.413657] postgresql-pre-start[685]: Data page checksums are enabled.981buildbot # [ 12.417268] postgresql-pre-start[685]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok982buildbot # [ 12.422236] postgresql-pre-start[685]: creating subdirectories ... ok983buildbot # [ 12.424272] postgresql-pre-start[685]: selecting dynamic shared memory implementation ... posix984buildbot # [ 12.795358] 8021q: adding VLAN 0 to HW filter on device eth0985buildbot # [ 12.548889] dhcpcd[660]: eth0: waiting for carrier986buildbot # [ 12.551934] dhcpcd[660]: eth0: carrier acquired987buildbot # [ 12.568398] systemd-vconsole-setup[672]: Configuration of first virtual console was skipped, ignoring remaining ones.988buildbot # [ 12.578646] systemd[1]: Finished Virtual Console Setup.989buildbot # [ 12.581323] dhcpcd[660]: DUID 00:01:00:01:32:26:9d:58:52:54:00:12:34:56990buildbot # [ 12.584442] dhcpcd[660]: eth0: IAID 00:12:34:56991buildbot # [ 12.587876] dhcpcd[660]: eth0: adding address fe80::5054:ff:fe12:3456992buildbot # [ 12.606778] postgresql-pre-start[685]: selecting default "max_connections" ... 100993buildbot # [ 12.712900] postgresql-pre-start[685]: selecting default "shared_buffers" ... 128MB994buildbot # [ 12.978565] dhcpcd[660]: eth0: soliciting a DHCP lease995buildbot # [ 13.253725] NET: Registered PF_PACKET protocol family996buildbot # [ 13.006708] dhcpcd[660]: eth0: offered 10.0.2.15 from 10.0.2.2997buildbot # [ 13.010250] dhcpcd[660]: eth0: probing address 10.0.2.15/24998buildbot # [ 14.554481] gitea-pre-start[749]: 2026/08/30 07:50:50 .../v3@v3.10.0/command_run.go:95:(*Command).Run() [I] PING DATABASE sqlite3999buildbot # [ 14.557987] gitea-pre-start[749]: 2026/08/30 07:50:50 cmd/migrate.go:31:runMigrate() [I] AppPath: /nix/store/way79cwaiw6lx2dvw7cax4wx0p6nkndg-gitea-1.27.3/bin/gitea1000buildbot # [ 14.561715] gitea-pre-start[749]: 2026/08/30 07:50:50 cmd/migrate.go:32:runMigrate() [I] AppWorkPath: /var/lib/gitea1001buildbot # [ 14.564319] gitea-pre-start[749]: 2026/08/30 07:50:50 cmd/migrate.go:33:runMigrate() [I] Custom path: /var/lib/gitea/custom1002buildbot # [ 14.566970] gitea-pre-start[749]: 2026/08/30 07:50:50 cmd/migrate.go:34:runMigrate() [I] Log path: /var/lib/gitea/log1003buildbot # [ 14.569605] gitea-pre-start[749]: 2026/08/30 07:50:50 cmd/migrate.go:35:runMigrate() [I] Configuration file: /var/lib/gitea/custom/conf/app.ini1004buildbot # [ 14.664903] dhcpcd[660]: eth0: soliciting an IPv6 router1005buildbot # [ 14.667755] dhcpcd[660]: eth0: Router Advertisement from fe80::21006buildbot # [ 14.669539] dhcpcd[660]: eth0: adding address fec0::5054:ff:fe12:3456/641007buildbot # [ 14.671674] dhcpcd[660]: eth0: adding route to fec0::/641008buildbot # [ 14.673533] dhcpcd[660]: eth0: adding default route via fe80::21009buildbot # [ 15.701636] postgresql-pre-start[685]: selecting default time zone ... UTC1010buildbot # [ 15.708097] postgresql-pre-start[685]: creating configuration files ... ok1011buildbot # [ 16.057687] postgresql-pre-start[685]: running bootstrap script ... ok1012buildbot # [ 17.000675] postgresql-pre-start[685]: performing post-bootstrap initialization ... ok1013buildbot # [ 18.024268] postgresql-pre-start[685]: syncing data to disk ... ok1014buildbot # [ 18.025918] postgresql-pre-start[685]: initdb: warning: enabling "trust" authentication for local connections1015buildbot # [ 18.028387] postgresql-pre-start[685]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1016buildbot # [ 18.032165] postgresql-pre-start[685]: Success. You can now start the database server using:1017buildbot # [ 18.034765] postgresql-pre-start[685]: pg_ctl -D /var/lib/postgresql/18 -l logfile start1018buildbot # [ 18.217183] postgres[786]: [786] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1019buildbot # [ 18.234725] postgres[786]: [786] LOG: listening on IPv6 address "::1", port 54321020buildbot # [ 18.236701] postgres[786]: [786] LOG: listening on IPv4 address "127.0.0.1", port 54321021buildbot # [ 18.240601] postgres[786]: [786] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1022buildbot # [ 18.264483] postgres[795]: [795] LOG: database system was shut down at 2026-08-30 07:50:53 GMT1023buildbot # [ 18.272353] postgres[786]: [786] LOG: database system is ready to accept connections1024buildbot # [ 18.281324] systemd[1]: Started PostgreSQL Server.1025buildbot # [ 18.292434] systemd[1]: Starting PostgreSQL Setup Scripts...1026buildbot # [ 18.484994] dhcpcd[660]: eth0: leased 10.0.2.15 for 86400 seconds1027buildbot # [ 18.489351] dhcpcd[660]: eth0: adding route to 10.0.2.0/241028buildbot # [ 18.492192] dhcpcd[660]: eth0: adding default route via 10.0.2.21029buildbot # [ 18.693928] postgresql-setup-start[806]: CREATE DATABASE1030buildbot # [ 18.731570] systemd[1]: Started DHCP Client.1031buildbot # [ 18.773583] postgresql-setup-start[869]: CREATE ROLE1032buildbot # [ 18.824946] postgresql-setup-start[872]: ALTER DATABASE1033buildbot # [ 18.835178] systemd[1]: Finished PostgreSQL Setup Scripts.1034buildbot # [ 18.839661] systemd[1]: Reached target PostgreSQL.1035buildbot # [ 20.097684] gitea[890]: 2026/08/30 07:50:56 cmd/web.go:263:runWeb() [I] Starting Gitea on PID: 8901036buildbot # [ 21.477215] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:115:showWebStartupMessage() [I] Gitea version: 1.27.3 built with go1.26.7 : sqlite, sqlite_unlock_notify1037buildbot # [ 21.480478] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:116:showWebStartupMessage() [I] * RunMode: prod1038buildbot # [ 21.482856] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:117:showWebStartupMessage() [I] * AppPath: /nix/store/way79cwaiw6lx2dvw7cax4wx0p6nkndg-gitea-1.27.3/bin/gitea1039buildbot # [ 21.486147] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:118:showWebStartupMessage() [I] * WorkPath: /var/lib/gitea1040buildbot # [ 21.488541] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:119:showWebStartupMessage() [I] * CustomPath: /var/lib/gitea/custom1041buildbot # [ 21.491174] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:120:showWebStartupMessage() [I] * ConfigFile: /var/lib/gitea/custom/conf/app.ini1042buildbot # [ 21.493952] gitea[890]: 2026/08/30 07:50:57 cmd/web.go:121:showWebStartupMessage() [I] Prepare to run web server1043buildbot # [ 21.780841] gitea[890]: 2026/08/30 07:50:57 routers/init.go:117:InitWebInstalled() [I] Git version: 2.55.0 (home: /var/lib/gitea/data/home)1044buildbot # [ 22.159812] gitea[890]: 2026/08/30 07:50:58 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.01045buildbot # [ 22.179150] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:227:initAttachments() [I] Initialising Attachment storage with type: local1046buildbot # [ 22.182171] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/attachments1047buildbot # [ 22.185236] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:217:initAvatars() [I] Initialising Avatar storage with type: local1048buildbot # [ 22.187938] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/avatars1049buildbot # [ 22.191518] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:243:initRepoAvatars() [I] Initialising Repository Avatar storage with type: local1050buildbot # [ 22.194622] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-avatars1051buildbot # [ 22.197802] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:249:initRepoArchives() [I] Initialising Repository Archive storage with type: local1052buildbot # [ 22.201122] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-archive1053buildbot # [ 22.204433] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:259:initPackages() [I] Initialising Packages storage with type: local1054buildbot # [ 22.207300] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/packages1055buildbot # [ 22.210388] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:270:initActions() [I] Initialising Actions storage with type: local1056buildbot # [ 22.213251] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_log1057buildbot # [ 22.217128] gitea[890]: 2026/08/30 07:50:58 modules/storage/storage.go:274:initActions() [I] Initialising ActionsArtifacts storage with type: local1058buildbot # [ 22.220101] gitea[890]: 2026/08/30 07:50:58 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_artifacts1059buildbot # [ 22.254133] gitea[890]: 2026/08/30 07:50:58 routers/common/db.go:22:InitDBEngine() [I] Beginning ORM engine initialization.1060buildbot # [ 22.256685] gitea[890]: 2026/08/30 07:50:58 routers/common/db.go:29:InitDBEngine() [I] ORM engine initialization attempt #1/10...1061buildbot # [ 22.259281] gitea[890]: 2026/08/30 07:50:58 cmd/web.go:205:serveInstalled() [I] PING DATABASE sqlite31062buildbot # [ 22.360166] gitea[890]: 2026/08/30 07:50:58 cmd/web.go:205:serveInstalled() [W] Table system_setting Column version db default is , struct default is 11063buildbot # [ 22.493446] gitea[890]: 2026/08/30 07:50:58 routers/init.go:138:InitWebInstalled() [I] ORM engine initialization successful!1064buildbot # [ 22.658539] gitea[890]: 2026/08/30 07:50:58 .../indexer/issues/indexer.go:78:InitIssueIndexer.1() [I] PID 890: Initializing Issue Indexer: bleve1065buildbot # [ 22.661822] gitea[890]: 2026/08/30 07:50:58 .../indexer/stats/indexer.go:41:populateRepoIndexer() [I] Populating the repo stats indexer with existing repositories1066buildbot # [ 22.683366] gitea[890]: 2026/08/30 07:50:58 routers/init.go:86:syncAppConfForGit() [I] AppPath changed from '' to '/nix/store/way79cwaiw6lx2dvw7cax4wx0p6nkndg-gitea-1.27.3/bin/gitea'1067buildbot # [ 22.687357] gitea[890]: 2026/08/30 07:50:58 routers/init.go:91:syncAppConfForGit() [I] CustomConf changed from '' to '/var/lib/gitea/custom/conf/app.ini'1068buildbot # [ 22.690762] gitea[890]: 2026/08/30 07:50:58 routers/init.go:97:syncAppConfForGit() [I] re-sync repository hooks ...1069buildbot # [ 22.693660] gitea[890]: 2026/08/30 07:50:58 routers/init.go:100:syncAppConfForGit() [I] re-write ssh public keys ...1070buildbot # [ 22.719351] gitea[890]: 2026/08/30 07:50:58 .../indexer/issues/indexer.go:155:InitIssueIndexer.2() [I] Issue Indexer Initialization took 87.963694ms1071buildbot # [ 23.961353] gitea[890]: 2026/08/30 07:50:59 cmd/web.go:329:listen() [I] Listen: http://0.0.0.0:37421072buildbot # [ 23.964753] gitea[890]: 2026/08/30 07:50:59 cmd/web.go:333:listen() [I] AppURL(ROOT_URL): http://localhost:3742/1073buildbot # [ 23.967090] gitea[890]: 2026/08/30 07:50:59 modules/graceful/server.go:52:NewServer() [I] Starting new Web server: tcp:0.0.0.0:3742 on PID: 8901074buildbot # [ 23.972234] systemd[1]: Started gitea.1075buildbot # [ 23.977666] systemd[1]: Starting Setup Gitea test environment...1076buildbot # [ 24.024273] setup-gitea-start[944]: + timeout 60 /nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin/bash -c 'until curl -s http://localhost:3742/api/v1/version; do sleep 1; done'1077buildbot # [ 24.143643] setup-gitea-start[947]: {"version":"1.27.3"}1078buildbot # [ 24.148052] gitea[890]: 2026/08/30 07:51:00 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:43190, 200 OK in 19.3ms @ misc/version.go:15(misc.Version)1079buildbot: (finished: waiting for unit gitea.service, in 25.35 seconds)1080buildbot # [ 24.158845] setup-gitea-start[944]: + echo 'Gitea is ready'1081buildbot: waiting for unit setup-gitea.service1082buildbot # [ 24.160349] setup-gitea-start[944]: Gitea is ready1083buildbot # [ 24.161652] setup-gitea-start[944]: + echo 'Creating admin user...'1084buildbot # [ 24.163827] setup-gitea-start[944]: Creating admin user...1085buildbot # [ 24.165362] setup-gitea-start[944]: + cd /var/lib/gitea1086buildbot # [ 24.167207] setup-gitea-start[944]: + runuser -u gitea -- env GITEA_WORK_DIR=/var/lib/gitea GITEA_CUSTOM=/var/lib/gitea/custom /nix/store/way79cwaiw6lx2dvw7cax4wx0p6nkndg-gitea-1.27.3/bin/gitea admin user create --config /var/lib/gitea/custom/conf/app.ini --username gitea-admin --password testpassword123 --email admin@example.com --admin --must-change-password=false1087buildbot # [ 24.203512] runuser[954]: pam_unix(runuser:session): session opened for user gitea(uid=996) by (uid=0)1088buildbot # [ 24.373453] setup-gitea-start[957]: 2026/08/30 07:51:00 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.01089buildbot # [ 24.401051] setup-gitea-start[957]: New user 'gitea-admin' has been successfully created!1090buildbot # [ 24.409609] runuser[954]: pam_unix(runuser:session): session closed for user gitea1091buildbot # [ 24.413763] setup-gitea-start[944]: + USER_CREATE_RESULT=01092buildbot # [ 24.415197] setup-gitea-start[944]: + '[' 0 -ne 0 ']'1093buildbot # [ 24.416512] setup-gitea-start[944]: + echo 'Verifying user exists via API...'1094buildbot # [ 24.418206] setup-gitea-start[944]: Verifying user exists via API...1095buildbot # [ 24.420477] setup-gitea-start[944]: + for i in {1..10}1096buildbot # [ 24.422367] setup-gitea-start[963]: ++ curl -s -u gitea-admin:testpassword123 http://localhost:3742/api/v1/user1097buildbot # [ 24.495686] gitea[890]: 2026/08/30 07:51:00 HTTPRequest [I] router: completed GET /api/v1/user for [::1]:43204, 200 OK in 42.8ms @ user/user.go:127(user.GetAuthenticatedUser)1098buildbot # [ 24.504731] setup-gitea-start[944]: + USER_CHECK='{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'1099buildbot # [ 24.524973] setup-gitea-start[965]: + echo '{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'1100buildbot # [ 24.536133] setup-gitea-start[966]: + grep -q '"username":"gitea-admin"'1101buildbot # [ 24.539089] setup-gitea-start[944]: + echo 'User verified to exist!'1102buildbot # [ 24.540661] setup-gitea-start[944]: User verified to exist!1103buildbot # [ 24.542108] setup-gitea-start[944]: + break1104buildbot # [ 24.543222] setup-gitea-start[944]: + echo 'Creating access token...'1105buildbot # [ 24.545438] setup-gitea-start[944]: Creating access token...1106buildbot # [ 24.547279] setup-gitea-start[967]: ++ curl -v -X POST -H 'Content-Type: application/json' -d '{"name":"buildbot-token","scopes":["write:repository","write:user","write:admin","write:organization"]}' -u gitea-admin:testpassword123 http://localhost:3742/api/v1/users/gitea-admin/tokens1107buildbot # [ 24.625924] gitea[890]: 2026/08/30 07:51:00 HTTPRequest [I] router: completed POST /api/v1/users/gitea-admin/tokens for [::1]:43218, 201 Created in 38.0ms @ user/app.go:75(user.CreateAccessToken)1108buildbot # [ 24.636149] setup-gitea-start[944]: + TOKEN_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43218 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:00 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 6183 2403 0\r100 368 100 265 100 103 5582 2169 0\r100 368 100 265 100 103 5571 2165 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"32d469c80edb6cd8f8ce9fbe6e5176ee12762642","token_last_eight":"12762642","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1109buildbot # [ 24.666667] setup-gitea-start[944]: + echo $'Token response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43218 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:00 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 6183 2403 0\r100 368 100 265 100 103 5582 2169 0\r100 368 100 265 100 103 5571 2165 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"32d469c80edb6cd8f8ce9fbe6e5176ee12762642","token_last_eight":"12762642","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1110buildbot # [ 24.697236] setup-gitea-start[944]: Token response: Note: Unnecessary use of -X or --request, POST is already inferred.1111buildbot # [ 24.700731] setup-gitea-start[944]: * Host localhost:3742 was resolved.1112buildbot # [ 24.702346] setup-gitea-start[944]: * IPv6: ::11113buildbot # [ 24.704052] setup-gitea-start[944]: * IPv4: 127.0.0.11114buildbot # [ 24.705516] setup-gitea-start[944]: * Trying [::1]:3742...1115buildbot # [ 24.707364] setup-gitea-start[944]: * Established connection to localhost (::1 port 3742) from ::1 port 432181116buildbot # [ 24.709934] setup-gitea-start[944]: % Total % Received % Xferd Average Speed Time Time Time Current1117buildbot # [ 24.712402] setup-gitea-start[944]: Dload Upload Total Spent Left Speed1118buildbot # [ 24.715083] setup-gitea-start[944]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1119buildbot # [ 24.717778] setup-gitea-start[944]: * Server auth using Basic with user 'gitea-admin'1120buildbot # [ 24.720072] setup-gitea-start[944]: > POST /api/v1/users/gitea-admin/tokens HTTP/1.11121buildbot # [ 24.722163] setup-gitea-start[944]: > Host: localhost:37421122buildbot # [ 24.723630] setup-gitea-start[944]: > Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz1123buildbot # [ 24.725764] setup-gitea-start[944]: > User-Agent: curl/8.21.01124buildbot # [ 24.727308] setup-gitea-start[944]: > Accept: */*1125buildbot # [ 24.728908] setup-gitea-start[944]: > Content-Type: application/json1126buildbot # [ 24.730880] setup-gitea-start[944]: > Content-Length: 1031127buildbot # [ 24.732318] setup-gitea-start[944]: >1128buildbot # [ 24.733936] setup-gitea-start[944]: } [103 bytes data]1129buildbot # [ 24.735271] setup-gitea-start[944]: * upload completely sent off: 103 bytes1130buildbot # [ 24.736954] setup-gitea-start[944]: < HTTP/1.1 201 Created1131buildbot # [ 24.738356] setup-gitea-start[944]: < Cache-Control: max-age=0, private, must-revalidate1132buildbot # [ 24.740352] setup-gitea-start[944]: < Content-Type: application/json;charset=utf-81133buildbot # [ 24.742426] setup-gitea-start[944]: < X-Content-Type-Options: nosniff1134buildbot # [ 24.744758] setup-gitea-start[944]: < X-Frame-Options: SAMEORIGIN1135buildbot # [ 24.746359] setup-gitea-start[944]: < Date: Sun, 30 Aug 2026 07:51:00 GMT1136buildbot # [ 24.748079] setup-gitea-start[944]: < Content-Length: 2651137buildbot # [ 24.749708] setup-gitea-start[944]: <1138buildbot # [ 24.750842] setup-gitea-start[944]: { [265 bytes data]1139buildbot # [ 24.752261] setup-gitea-start[944]: 100 368 100 265 100 103 6183 2403 0100 368 100 265 100 103 5582 2169 0100 368 100 265 100 103 5571 2165 01140buildbot # [ 24.757507] setup-gitea-start[944]: * Connection #0 to host localhost:3742 left intact1141buildbot # [ 24.759669] setup-gitea-start[944]: {"id":1,"name":"buildbot-token","sha1":"32d469c80edb6cd8f8ce9fbe6e5176ee12762642","token_last_eight":"12762642","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}1142buildbot # [ 24.765792] setup-gitea-start[970]: ++ echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43218 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:00 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 6183 2403 0\r100 368 100 265 100 103 5582 2169 0\r100 368 100 265 100 103 5571 2165 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"32d469c80edb6cd8f8ce9fbe6e5176ee12762642","token_last_eight":"12762642","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1143buildbot # [ 24.797511] setup-gitea-start[971]: ++ grep -o '"sha1":"[^"]*'1144buildbot # [ 24.800284] setup-gitea-start[972]: ++ cut '-d"' -f41145buildbot # [ 24.804844] setup-gitea-start[944]: + TOKEN=32d469c80edb6cd8f8ce9fbe6e5176ee127626421146buildbot # [ 24.806887] setup-gitea-start[944]: + '[' -z 32d469c80edb6cd8f8ce9fbe6e5176ee12762642 ']'1147buildbot # [ 24.808873] setup-gitea-start[944]: + echo 'Token created successfully: 32d469c80e...'1148buildbot # [ 24.810898] setup-gitea-start[944]: Token created successfully: 32d469c80e...1149buildbot # [ 24.812677] setup-gitea-start[944]: + mkdir -p /var/lib/buildbot1150buildbot # [ 24.823501] setup-gitea-start[944]: + echo 32d469c80edb6cd8f8ce9fbe6e5176ee127626421151buildbot # [ 24.825384] setup-gitea-start[944]: + chmod 644 /var/lib/buildbot/gitea-token1152buildbot # [ 24.836605] setup-gitea-start[944]: + echo 32d469c80edb6cd8f8ce9fbe6e5176ee127626421153buildbot # [ 24.838453] setup-gitea-start[944]: + echo 'Creating repository test-flake...'1154buildbot # [ 24.840240] setup-gitea-start[944]: Creating repository test-flake...1155buildbot # [ 24.842779] setup-gitea-start[975]: ++ curl -v -X POST -H 'Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642' -H 'Content-Type: application/json' -H 'accept: application/json' -d '{"name":"test-flake","private":false}' http://localhost:3742/api/v1/user/repos1156buildbot # [ 25.065437] gitea[890]: 2026/08/30 07:51:01 HTTPRequest [I] router: completed POST /api/v1/user/repos for [::1]:43232, 201 Created in 182.2ms @ repo/repo.go:280(repo.Create)1157buildbot # [ 25.076725] setup-gitea-start[944]: + REPO_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43232 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:01 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 12639 198 0\r100 2391 0 2354 100 37 12609 198 0\r100 2391 0 2354 100 37 12309 193 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-30T07:51:00Z","updated_at":"2026-08-30T07:51:01Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1158buildbot # [ 25.142521] setup-gitea-start[944]: + echo $'Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43232 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:01 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 12639 198 0\r100 2391 0 2354 100 37 12609 198 0\r100 2391 0 2354 100 37 12309 193 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-30T07:51:00Z","updated_at":"2026-08-30T07:51:01Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1159buildbot # [ 25.210454] setup-gitea-start[944]: Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.1160buildbot # [ 25.213223] setup-gitea-start[944]: * Host localhost:3742 was resolved.1161buildbot # [ 25.214808] setup-gitea-start[944]: * IPv6: ::11162buildbot # [ 25.216972] setup-gitea-start[944]: * IPv4: 127.0.0.11163buildbot # [ 25.218531] setup-gitea-start[944]: * Trying [::1]:3742...1164buildbot # [ 25.220141] setup-gitea-start[944]: * Established connection to localhost (::1 port 3742) from ::1 port 432321165buildbot # [ 25.222945] setup-gitea-start[944]: % Total % Received % Xferd Average Speed Time Time Time Current1166buildbot # [ 25.225423] setup-gitea-start[944]: Dload Upload Total Spent Left Speed1167buildbot # [ 25.227793] setup-gitea-start[944]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1168buildbot # [ 25.230652] setup-gitea-start[944]: > POST /api/v1/user/repos HTTP/1.11169buildbot # [ 25.232755] setup-gitea-start[944]: > Host: localhost:37421170buildbot # [ 25.234497] setup-gitea-start[944]: > User-Agent: curl/8.21.01171buildbot # [ 25.236256] setup-gitea-start[944]: > Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee127626421172buildbot # [ 25.238748] setup-gitea-start[944]: > Content-Type: application/json1173buildbot # [ 25.240621] setup-gitea-start[944]: > accept: application/json1174buildbot # [ 25.242570] setup-gitea-start[944]: > Content-Length: 371175buildbot # [ 25.243974] setup-gitea-start[944]: >1176buildbot # [ 25.245353] setup-gitea-start[944]: } [37 bytes data]1177buildbot # [ 25.247519] setup-gitea-start[944]: * upload completely sent off: 37 bytes1178buildbot # [ 25.249913] setup-gitea-start[944]: < HTTP/1.1 201 Created1179buildbot # [ 25.251356] setup-gitea-start[944]: < Cache-Control: max-age=0, private, must-revalidate1180buildbot # [ 25.253562] setup-gitea-start[944]: < Content-Type: application/json;charset=utf-81181buildbot # [ 25.257473] setup-gitea-start[944]: < X-Content-Type-Options: nosniff1182buildbot # [ 25.259138] setup-gitea-start[944]: < X-Frame-Options: SAMEORIGIN1183buildbot # [ 25.260634] setup-gitea-start[944]: < Date: Sun, 30 Aug 2026 07:51:01 GMT1184buildbot # [ 25.262271] setup-gitea-start[944]: < Transfer-Encoding: chunked1185buildbot # [ 25.264597] setup-gitea-start[944]: <1186buildbot # [ 25.265877] setup-gitea-start[944]: { [2366 bytes data]1187buildbot # [ 25.267889] setup-gitea-start[944]: 100 2391 0 2354 100 37 12639 198 0100 2391 0 2354 100 37 12609 198 0100 2391 0 2354 100 37 12309 193 01188buildbot # [ 25.273356] setup-gitea-start[944]: * Connection #0 to host localhost:3742 left intact1189buildbot # [ 25.276448] setup-gitea-start[944]: {"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-30T07:51:00Z","updated_at":"2026-08-30T07:51:01Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}1190buildbot # [ 25.321354] setup-gitea-start[982]: + echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43232 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:01 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 12639 198 0\r100 2391 0 2354 100 37 12609 198 0\r100 2391 0 2354 100 37 12309 193 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-30T07:51:00Z","updated_at":"2026-08-30T07:51:01Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1191buildbot # [ 25.386830] setup-gitea-start[983]: + grep -q '"id"'1192buildbot # [ 25.390158] setup-gitea-start[944]: + echo 'Repository created successfully'1193buildbot # [ 25.392626] setup-gitea-start[944]: Repository created successfully1194buildbot # [ 25.395373] setup-gitea-start[944]: + echo 'Adding buildbot-nix topic to repository...'1195buildbot # [ 25.398147] setup-gitea-start[944]: Adding buildbot-nix topic to repository...1196buildbot # [ 25.400343] setup-gitea-start[987]: ++ curl -v -X PUT -H 'Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642' -H 'Content-Type: application/json' -d '{"topics":["buildbot-nix"]}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/topics1197buildbot # [ 25.489048] gitea[890]: 2026/08/30 07:51:01 HTTPRequest [I] router: completed PUT /api/v1/repos/gitea-admin/test-flake/topics for [::1]:43246, 204 No Content in 37.3ms @ repo/topic.go:75(repo.UpdateTopics)1198buildbot # [ 25.500962] setup-gitea-start[944]: + TOPIC_RESPONSE=$'* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43246 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:01 GMT\r\n< \r\n\r100 27 0 0 100 27 0 545 0\r100 27 0 0 100 27 0 543 0\r100 27 0 0 100 27 0 542 0\n* Connection #0 to host localhost:3742 left intact'1199buildbot # [ 25.523624] setup-gitea-start[944]: + echo $'Topic response: * Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 43246 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 30 Aug 2026 07:51:01 GMT\r\n< \r\n\r100 27 0 0 100 27 0 545 0\r100 27 0 0 100 27 0 543 0\r100 27 0 0 100 27 0 542 0\n* Connection #0 to host localhost:3742 left intact'1200buildbot # [ 25.548199] setup-gitea-start[944]: Topic response: * Host localhost:3742 was resolved.1201buildbot # [ 25.550317] setup-gitea-start[944]: * IPv6: ::11202buildbot # [ 25.551587] setup-gitea-start[944]: * IPv4: 127.0.0.11203buildbot # [ 25.552969] setup-gitea-start[944]: * Trying [::1]:3742...1204buildbot # [ 25.554705] setup-gitea-start[944]: * Established connection to localhost (::1 port 3742) from ::1 port 432461205buildbot # [ 25.558069] setup-gitea-start[944]: % Total % Received % Xferd Average Speed Time Time Time Current1206buildbot # [ 25.560412] setup-gitea-start[944]: Dload Upload Total Spent Left Speed1207buildbot # [ 25.562739] setup-gitea-start[944]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1208buildbot # [ 25.565339] setup-gitea-start[944]: > PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.11209buildbot # [ 25.567732] setup-gitea-start[944]: > Host: localhost:37421210buildbot # [ 25.569517] setup-gitea-start[944]: > User-Agent: curl/8.21.01211buildbot # [ 25.571635] setup-gitea-start[944]: > Accept: */*1212buildbot # [ 25.573097] setup-gitea-start[944]: > Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee127626421213buildbot # [ 25.575500] setup-gitea-start[944]: > Content-Type: application/json1214buildbot # [ 25.577491] setup-gitea-start[944]: > Content-Length: 271215buildbot # [ 25.578929] setup-gitea-start[944]: >1216buildbot # [ 25.580220] setup-gitea-start[944]: } [27 bytes data]1217buildbot # [ 25.581598] setup-gitea-start[944]: * upload completely sent off: 27 bytes1218buildbot # [ 25.583343] setup-gitea-start[944]: < HTTP/1.1 204 No Content1219buildbot # [ 25.585116] setup-gitea-start[944]: < Cache-Control: max-age=0, private, must-revalidate1220buildbot # [ 25.587049] setup-gitea-start[944]: < X-Content-Type-Options: nosniff1221buildbot # [ 25.589119] setup-gitea-start[944]: < X-Frame-Options: SAMEORIGIN1222buildbot # [ 25.590627] setup-gitea-start[944]: < Date: Sun, 30 Aug 2026 07:51:01 GMT1223buildbot # [ 25.592647] setup-gitea-start[944]: <1224buildbot # [ 25.593695] setup-gitea-start[944]: 100 27 0 0 100 27 0 545 0100 27 0 0 100 27 0 543 0100 27 0 0 100 27 0 542 01225buildbot # [ 25.598730] setup-gitea-start[944]: * Connection #0 to host localhost:3742 left intact1226buildbot # [ 25.600561] setup-gitea-start[944]: + rm -rf /tmp/test-flake1227buildbot # [ 25.604218] setup-gitea-start[944]: + mkdir -p /tmp/test-flake1228buildbot # [ 25.613641] setup-gitea-start[944]: + cd /tmp/test-flake1229buildbot # [ 25.615120] setup-gitea-start[944]: + git init1230buildbot # [ 25.648594] setup-gitea-start[993]: hint: Using 'master' as the name for the initial branch. This default branch name1231buildbot # [ 25.651066] setup-gitea-start[993]: hint: will change to "main" in Git 3.0. To configure the initial branch name1232buildbot # [ 25.653421] setup-gitea-start[993]: hint: to use in all of your new repositories, which will suppress this warning,1233buildbot # [ 25.655855] setup-gitea-start[993]: hint: call:1234buildbot # [ 25.657139] setup-gitea-start[993]: hint:1235buildbot # [ 25.658329] setup-gitea-start[993]: hint: git config --global init.defaultBranch <name>1236buildbot # [ 25.660470] setup-gitea-start[993]: hint:1237buildbot # [ 25.661591] setup-gitea-start[993]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and1238buildbot # [ 25.664354] setup-gitea-start[993]: hint: 'development'. The just-created branch can be renamed via this command:1239buildbot # [ 25.666927] setup-gitea-start[993]: hint:1240buildbot # [ 25.668199] setup-gitea-start[993]: hint: git branch -m <name>1241buildbot # [ 25.669813] setup-gitea-start[993]: hint:1242buildbot # [ 25.671493] setup-gitea-start[993]: hint: Disable this message with "git config set advice.defaultBranchName false"1243buildbot # [ 25.673952] setup-gitea-start[993]: Initialized empty Git repository in /tmp/test-flake/.git/1244buildbot # [ 25.676301] setup-gitea-start[944]: + git config user.name 'Test User'1245buildbot # [ 25.685449] setup-gitea-start[944]: + git config user.email test@example.com1246buildbot # [ 25.697097] setup-gitea-start[944]: + cat1247buildbot # [ 25.708743] setup-gitea-start[944]: + cat1248buildbot # [ 25.717868] setup-gitea-start[944]: + git add flake.nix buildbot-nix.toml1249buildbot # [ 25.740820] setup-gitea-start[944]: + git commit -m 'Initial commit'1250buildbot # [ 25.800233] setup-gitea-start[999]: [master (root-commit) f3e8722] Initial commit1251buildbot # [ 25.802140] setup-gitea-start[999]: 2 files changed, 24 insertions(+)1252buildbot # [ 25.803754] setup-gitea-start[999]: create mode 100644 buildbot-nix.toml1253buildbot # [ 25.805426] setup-gitea-start[999]: create mode 100644 flake.nix1254buildbot # [ 25.808243] setup-gitea-start[944]: + echo 'Verifying repository exists...'1255buildbot # [ 25.810695] setup-gitea-start[944]: Verifying repository exists...1256buildbot # [ 25.812727] setup-gitea-start[1002]: ++ curl -s -H 'Authorization: token 32d469c80edb6cd8f8ce9fbe6e5176ee12762642' http://localhost:3742/api/v1/repos/gitea-admin/test-flake1257buildbot # [ 25.871765] gitea[890]: 2026/08/30 07:51:01 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake for [::1]:43260, 200 OK in 21.4ms @ repo/repo.go:498(repo.Get)1258buildbot # [ 25.881588] setup-gitea-start[944]: + REPO_CHECK='{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-30T07:51:00Z","updated_at":"2026-08-30T07:51:01Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1259buildbot # [ 25.924302] setup-gitea-start[1003]: + echo '{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-08-30T07:51:00Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-08-30T07:51:00Z","updated_at":"2026-08-30T07:51:01Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1260buildbot # [ 25.966981] setup-gitea-start[1004]: + grep -q '"id"'1261buildbot # [ 25.980635] setup-gitea-start[944]: + echo 'Repository confirmed to exist, pushing code...'1262buildbot # [ 25.982601] setup-gitea-start[944]: Repository confirmed to exist, pushing code...1263buildbot # [ 25.984407] setup-gitea-start[944]: + git remote add origin http://gitea-admin:testpassword123@localhost:3742/gitea-admin/test-flake.git1264buildbot # [ 26.003569] setup-gitea-start[944]: + git push -u origin master1265buildbot # [ 26.095406] gitea[890]: 2026/08/30 07:51:02 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:43270, 401 Unauthorized in 5.4ms @ repo/githttp.go:455(repo.GetInfoRefs)1266buildbot # [ 26.135689] gitea[890]: 2026/08/30 07:51:02 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:43270, 200 OK in 34.5ms @ repo/githttp.go:455(repo.GetInfoRefs)1267buildbot # [ 26.428064] gitea[890]: 2026/08/30 07:51:02 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 7.0ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1268buildbot # [ 26.856477] gitea[890]: 2026/08/30 07:51:02 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 76.9ms @ private/hook_post_receive.go:101(private.HookPostReceive)1269buildbot # [ 26.879175] gitea[890]: 2026/08/30 07:51:02 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:43270, 200 OK in 704.1ms @ repo/githttp.go:438(repo.ServiceReceivePack)1270buildbot # [ 26.887308] setup-gitea-start[1006]: To http://localhost:3742/gitea-admin/test-flake.git1271buildbot # [ 26.889313] setup-gitea-start[1006]: * [new branch] master -> master1272buildbot # [ 26.899517] setup-gitea-start[1006]: branch 'master' set up to track 'origin/master'.1273buildbot # [ 26.905395] systemd[1]: Finished Setup Gitea test environment.1274buildbot # [ 26.911839] systemd[1]: Starting Buildbot Continuous Integration Server....1275buildbot # [ 26.981891] buildbot-master-pre-start[1075]: mkdir: created directory '/var/lib/buildbot/master'1276buildbot: (finished: waiting for unit setup-gitea.service, in 3.43 seconds)1277buildbot: waiting for unit multi-user.target1278buildbot # [ 33.853464] buildbot-master-pre-start[1077]: updating existing installation1279buildbot # [ 33.855479] buildbot-master-pre-start[1077]: not touching existing buildbot.tac1280buildbot # [ 33.858302] buildbot-master-pre-start[1077]: creating buildbot.tac.new instead1281buildbot # [ 33.860067] buildbot-master-pre-start[1077]: creating /var/lib/buildbot/master/master.cfg.sample1282buildbot # [ 33.862185] buildbot-master-pre-start[1077]: creating database (postgresql://@/buildbot)1283buildbot # [ 33.864181] buildbot-master-pre-start[1077]: buildmaster configured in /var/lib/buildbot/master1284buildbot # [ 34.106514] systemd[1]: Started Buildbot Continuous Integration Server..1285buildbot # [ 34.114119] systemd[1]: Started Buildbot Worker..1286buildbot # [ 34.115775] systemd[1]: Reached target Multi-User System.1287buildbot # [ 34.118201] systemd[1]: Startup finished in 1.065s (kernel) + 5.307s (initrd) + 27.744s (userspace) = 34.118s.1288buildbot: (finished: waiting for unit multi-user.target, in 6.74 seconds)1289subtest: Gitea service is accessible1290buildbot: waiting for TCP port 3742 on localhost1291buildbot # Connection to localhost (::1) 3742 port [tcp/cst-port] succeeded!1292buildbot: (finished: waiting for TCP port 3742 on localhost, in 0.09 seconds)1293??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1294 File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391295buildbot: waiting for success: curl --fail http://localhost:3742/api/v1/version1296??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1297 File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391298buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1299buildbot # Dload Upload Total Spent Left Speed1300buildbot # 0 0 0 0 0 0 0 0 0100 2[ 34.570457] gitea[890]: 2026/08/30 07:51:10 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:35446, 200 OK in 1.9ms @ misc/version.go:15(misc.Version)1301buildbot # 1 100 21 0 0 335 0 0100 21 100 21 0 0 247 0 0100 21 100 21 0 0 203 0 01302buildbot: (finished: waiting for success: curl --fail http://localhost:3742/api/v1/version, in 0.22 seconds)1303(finished: subtest: Gitea service is accessible, in 0.31 seconds)1304subtest: Gitea token was created1305buildbot: must succeed: test -f /var/lib/buildbot/gitea-token1306buildbot: (finished: must succeed: test -f /var/lib/buildbot/gitea-token, in 0.03 seconds)1307buildbot: must succeed: cat /tmp/gitea-token1308buildbot: (finished: must succeed: cat /tmp/gitea-token, in 0.04 seconds)1309(finished: subtest: Gitea token was created, in 0.07 seconds)1310subtest: Master and worker services start1311buildbot: waiting for unit buildbot-master.service1312buildbot: (finished: waiting for unit buildbot-master.service, in 0.08 seconds)1313buildbot: waiting for unit buildbot-worker.service1314buildbot: (finished: waiting for unit buildbot-worker.service, in 0.10 seconds)1315buildbot: waiting for TCP port 8010 on localhost1316buildbot # [ 36.095427] twistd[1161]: Starting worker local-worker-0001317buildbot # [ 36.097163] twistd[1161]: 2026-08-30T07:51:11+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1318buildbot # [ 36.100693] twistd[1161]: 2026-08-30T07:51:12+0000 [-] Loaded.1319buildbot # [ 36.102562] twistd[1161]: 2026-08-30T07:51:12+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up.1320buildbot # [ 36.107405] twistd[1161]: 2026-08-30T07:51:12+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1321buildbot # [ 36.110951] twistd[1161]: 2026-08-30T07:51:12+0000 [-] Starting Worker -- version: 2026.08.301322buildbot # [ 36.113383] twistd[1161]: 2026-08-30T07:51:12+0000 [-] recording hostname in twistd.hostname1323buildbot # [ 36.115875] twistd[1161]: 2026-08-30T07:51:12+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742d1f760050>1324buildbot # [ 36.126458] twistd[1161]: 2026-08-30T07:51:12+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x742d1f760590> in 1.965043215416172 seconds.1325buildbot # [ 36.131192] twistd[1161]: 2026-08-30T07:51:12+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x742d1f760050>1326buildbot # [ 38.097351] twistd[1161]: 2026-08-30T07:51:14+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742d1f760050>1327buildbot # [ 38.108656] twistd[1161]: 2026-08-30T07:51:14+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x742d1f760590> in 3.1031193148514333 seconds.1328buildbot # [ 38.113404] twistd[1161]: 2026-08-30T07:51:14+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x742d1f760050>1329buildbot # [ 38.216716] twistd[1160]: 2026-08-30T07:51:11+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1330buildbot # [ 38.219751] twistd[1160]: 2026-08-30T07:51:14+0000 [-] Loaded.1331buildbot # [ 38.221359] twistd[1160]: 2026-08-30T07:51:14+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up.1332buildbot # [ 38.225561] twistd[1160]: 2026-08-30T07:51:14+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1333buildbot # [ 38.228733] twistd[1160]: 2026-08-30T07:51:14+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01334buildbot # [ 38.242191] twistd[1160]: 2026-08-30T07:51:14+0000 [-] Loading configuration from '/nix/store/nd0y6q25qykarqyhdg481gfvazjmg19n-master.cfg'1335buildbot # [ 39.288078] twistd[1160]: 2026-08-30T07:51:15+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1336buildbot # [ 39.397335] twistd[1160]: 2026-08-30T07:51:15+0000 [-] adding 2 new builders, removing 01337buildbot # [ 39.430198] twistd[1160]: 2026-08-30T07:51:15+0000 [-] adding 4 new services, removing 01338buildbot # [ 39.548722] twistd[1160]: 2026-08-30T07:51:15+0000 [-] adding 4 new schedulers, removing 01339buildbot # [ 39.580762] twistd[1160]: 2026-08-30T07:51:15+0000 [-] PeriodicWithStartup scheduler <reload-gitea-projects-bidaily>: missed scheduled build time - building immediately1340buildbot # [ 39.637184] twistd[1160]: 2026-08-30T07:51:15+0000 [-] BuildbotSite starting on 80101341buildbot # [ 39.640243] twistd[1160]: 2026-08-30T07:51:15+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x7885f94ffe00>1342buildbot # [ 39.644444] twistd[1160]: 2026-08-30T07:51:15+0000 [-] adding 5 new workers, removing 01343buildbot # [ 39.652245] twistd[1160]: 2026-08-30T07:51:15+0000 [-] added buildset 1 to database1344buildbot # [ 39.663882] twistd[1160]: 2026-08-30T07:51:15+0000 [-] PBServerFactory starting on 99891345buildbot # [ 39.666218] twistd[1160]: 2026-08-30T07:51:15+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x7885f83d4c20>1346buildbot # [ 39.709543] twistd[1160]: 2026-08-30T07:51:15+0000 [-] Starting Worker -- version: 2026.08.301347buildbot # [ 39.711661] twistd[1160]: 2026-08-30T07:51:15+0000 [-] recording hostname in twistd.hostname1348buildbot # [ 39.713644] twistd[1160]: 2026-08-30T07:51:15+0000 [-] message from master: attached1349buildbot # [ 39.717410] twistd[1160]: 2026-08-30T07:51:15+0000 [-] Got workerinfo from '__Janitor'1350buildbot # [ 39.726094] twistd[1160]: 2026-08-30T07:51:15+0000 [-] bot attached1351buildbot # [ 39.727642] twistd[1160]: 2026-08-30T07:51:15+0000 [-] Worker __Janitor attached to __Janitor1352buildbot # [ 39.729605] twistd[1160]: 2026-08-30T07:51:15+0000 [-] message from master: attached1353buildbot # [ 39.756649] twistd[1160]: 2026-08-30T07:51:15+0000 [-] BuildMaster is running1354buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1355buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.39 seconds)1356buildbot: waiting for success: curl --fail -v --head http://localhost:80101357buildbot # * Host localhost:8010 was resolved.1358buildbot # * IPv6: ::11359buildbot # * IPv4: 127.0.0.11360buildbot # * Trying [::1]:8010...1361buildbot # * connect to ::1 port 8010 from ::1 port 48694 failed: Connection refused1362buildbot # * Trying 127.0.0.1:8010...1363buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 486321364buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1365buildbot # Dload Upload Total Spent Left Speed1366buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1367buildbot # > HEAD / HTTP/1.11368buildbot # > Host: localhost:80101369buildbot # > User-Agent: curl/8.21.01370buildbot # > Accept: */*1371buildbot # >1372buildbot # * Request completely sent off1373buildbot # < HTTP/1.1 200 OK1374buildbot # < Date: Sun, 30 Aug 2026 07:51:16 GMT1375buildbot # < Content-Type: text/html1376buildbot # < Cache-Control: public,max-age=01377buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4NjgxMDc2fQ.sDoyzTC9sG2AN5WiSyIfZvpAnXE-ve-5KLwF5KuMQJU; Path=/1378buildbot # <1379buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01380buildbot # * Connection #0 to host localhost:8010 left intact1381buildbot: (finished: waiting for success: curl --fail -v --head http://localhost:8010, in 0.15 seconds)1382(finished: subtest: Master and worker services start, in 5.72 seconds)1383subtest: Project is registered in buildbot1384??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1385 File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281386buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1387buildbot # * Host localhost:8010 was resolved.1388buildbot # * IPv6: ::11389buildbot # * IPv4: 127.0.0.11390buildbot # * Trying [::1]:8010...1391buildbot # * connect to ::1 port 8010 from ::1 port 48700 failed: Connection refused1392buildbot # * Trying 127.0.0.1:8010...1393buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 486421394buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1395buildbot # Dload Upload Total Spent Left Speed1396buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1397buildbot # > GET /api/v2/projects HTTP/1.11398buildbot # > Host: localhost:80101399buildbot # > User-Agent: curl/8.21.01400buildbot # > Accept: */*1401buildbot # >1402buildbot # * Request completely sent off1403buildbot # < HTTP/1.1 200 OK1404buildbot # < Date: Sun, 30 Aug 2026 07:51:16 GMT1405buildbot # < Content-Type: text/plain; charset=utf-81406buildbot # < Content-Length: 531407buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4NjgxMDc2fQ.sDoyzTC9sG2AN5WiSyIfZvpAnXE-ve-5KLwF5KuMQJU; Path=/1408buildbot # <1409buildbot # { [53 bytes data]1410buildbot # 100 53 100 53 0 0 891 0 0100 53 100 53 0 0 765 0 0100 53 100 53 0 0 667 0 01411buildbot # * Connection #0 to host localhost:8010 left intact1412buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.15 seconds)1413buildbot # [ 41.216903] twistd[1161]: 2026-08-30T07:51:17+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742d1f760050>1414buildbot # [ 41.240721] twistd[1160]: 2026-08-30T07:51:17+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=34934)1415buildbot # [ 41.251253] twistd[1161]: 2026-08-30T07:51:17+0000 [Broker,client] message from master: attached1416buildbot # [ 41.261939] twistd[1160]: 2026-08-30T07:51:17+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1417buildbot # [ 41.278108] twistd[1160]: 2026-08-30T07:51:17+0000 [-] bot attached1418buildbot # [ 41.284271] twistd[1160]: 2026-08-30T07:51:17+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to reload-gitea-projects1419buildbot # [ 41.286966] twistd[1161]: 2026-08-30T07:51:17+0000 [Broker,client] message from master: attached1420buildbot # [ 41.299448] twistd[1161]: 2026-08-30T07:51:17+0000 [Broker,client] Connected to buildmaster; worker is ready1421buildbot # [ 41.301740] twistd[1161]: 2026-08-30T07:51:17+0000 [Broker,client] sending application-level keepalives every 600 seconds1422buildbot # [ 41.336958] twistd[1160]: 2026-08-30T07:51:17+0000 [-] starting build <Build reload-gitea-projects number:None results:success> using worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=AVAILABLE>1423buildbot # [ 41.341872] twistd[1160]: 2026-08-30T07:51:17+0000 [-] <Build reload-gitea-projects number:None results:success>.startBuild1424buildbot # [ 41.397615] twistd[1160]: 2026-08-30T07:51:17+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1425buildbot # [ 41.403678] twistd[1160]: 2026-08-30T07:51:17+0000 [-] starting build <Build reload-gitea-projects number:1 results:success>.. pinging the worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=BUILDING>1426buildbot # [ 41.408756] twistd[1160]: 2026-08-30T07:51:17+0000 [-] sending ping1427buildbot # [ 41.411505] twistd[1160]: 2026-08-30T07:51:17+0000 [Broker,0,127.0.0.1] ping finished: success1428buildbot # [ 41.413567] twistd[1161]: 2026-08-30T07:51:17+0000 [Broker,client] message from master: ping1429buildbot # [ 41.502243] gitea[890]: 2026/08/30 07:51:17 HTTPRequest [I] router: completed GET /api/v1/user/repos?limit=100 for [::1]:35448, 200 OK in 23.1ms @ user/repo.go:89(user.ListMyRepos)1430buildbot # [ 41.526895] gitea[890]: 2026/08/30 07:51:17 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/topics for [::1]:35458, 200 OK in 17.1ms @ repo/topic.go:21(repo.ListTopics)1431buildbot # [ 41.533563] twistd[1160]: 2026-08-30T07:51:17+0000 [buildbot_nix.gitea_projects#info] Updated backend gitea_projects with 1 projects1432buildbot # [ 41.540354] twistd[1160]: 2026-08-30T07:51:17+0000 [-] releaseLocks(ReloadGiteaProjects(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), PosixPath('gitea-project-cache.json'), backend=<buildbot_nix.gitea_projects.GiteaBackend object at 0x7885f991fe00>)): []1433buildbot # [ 41.560377] twistd[1160]: 2026-08-30T07:51:17+0000 [-] step 'reload_gitea_projects' complete: success (None)1434buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1435buildbot # [ 41.597175] gitea[890]: 2026/08/30 07:51:17 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks?limit=100 for [::1]:35468, 200 OK in 20.8ms @ repo/hook.go:26(repo.ListHooks)1436buildbot # [ 41.601190] twistd[1160]: 2026-08-30T07:51:17+0000 [-] creating hook for gitea-admin/test-flake1437buildbot # [ 41.635150] gitea[890]: 2026/08/30 07:51:17 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:35470, 201 Created in 27.9ms @ repo/hook.go:200(repo.CreateHook)1438buildbot # [ 41.640509] twistd[1160]: 2026-08-30T07:51:17+0000 [-] beginning configuration update1439buildbot # [ 41.644914] twistd[1160]: 2026-08-30T07:51:17+0000 [-] Loading configuration from '/nix/store/nd0y6q25qykarqyhdg481gfvazjmg19n-master.cfg'1440buildbot # [ 41.650884] twistd[1160]: 2026-08-30T07:51:17+0000 [-] releaseLocks(CreateGiteaProjectHooks(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), 'http://localhost/')): []1441buildbot # [ 41.663770] twistd[1160]: 2026-08-30T07:51:17+0000 [buildbot_nix.gitea_projects#info] Loading 1 cached repositories: [gitea-admin/test-flake]1442buildbot # [ 41.672335] twistd[1160]: 2026-08-30T07:51:17+0000 [-] step 'create_gitea_project_hooks' complete: success (None)1443buildbot # [ 41.674980] twistd[1160]: 2026-08-30T07:51:17+0000 [-] <Build reload-gitea-projects number:1 results:success>: build finished1444buildbot # [ 41.692265] twistd[1160]: 2026-08-30T07:51:17+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1445buildbot # * Host localhost:8010 was resolved.1446buildbot # * IPv6: ::11447buildbot # * IPv4: 127.0.0.11448buildbot # * Trying [::1]:8010...1449buildbot # * connect to ::1 port 8010 from ::1 port 48714 failed: Connection refused1450buildbot # * Trying 127.0.0.1:8010...1451buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 486501452buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1453buildbot # Dload Upload Total Spent Left Speed1454buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1455buildbot # > GET /api/v2/projects HTTP/1.11456buildbot # > Host: localhost:80101457buildbot # > User-Agent: curl/8.21.01458buildbot # > Accept: */*1459buildbot # >1460buildbot # * Request completely sent off1461buildbot # < HTTP/1.1 200 OK1462buildbot # < Date: Sun, 30 Aug 2026 07:51:17 GMT1463buildbot # < Content-Type: text/plain; charset=utf-81464buildbot # < Content-Length: 2901465buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg4NjgxMDc3fQ.OHFVE98KH5X_5E15716eoJbLIGeGsXUSe251Xs9xajQ; Path=/1466buildbot # <1467buildbot # { [290 bytes [ 41.784086] twistd[1160]: 2026-08-30T07:51:17+0000 [-] adding 8 new builders, removing 01468buildbot # data]1469buildbot # 100 290 100 290 0 0 3257 0 0100 290 100 290 0 0 2741 0 0100 290 100 290 0 0 2423 0 01470buildbot # * Connection #0 to host localhost:8010 left intact1471buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.27 seconds)1472(finished: subtest: Project is registered in buildbot, in 1.42 seconds)1473subtest: Verify webhook was created by buildbot1474buildbot: waiting for success: 1475 TOKEN=$(cat /tmp/gitea-token)1476 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1477 1478buildbot # [ 42.051192] gitea[890]: 2026/08/30 07:51:18 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:35480, 200 OK in 78.2ms @ repo/hook.go:26(repo.ListHooks)1479buildbot # [ 42.062911] twistd[1160]: 2026-08-30T07:51:18+0000 [-] adding 12 new schedulers, removing 01480buildbot: (finished: waiting for success: 1481 TOKEN=$(cat /tmp/gitea-token)1482 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1483 , in 0.23 seconds)1484(finished: subtest: Verify webhook was created by buildbot, in 0.23 seconds)1485subtest: Push new commit to trigger webhook1486buildbot: must succeed: 1487 cd /tmp/test-flake1488 echo '# Updated via webhook test' >> flake.nix1489 git add flake.nix1490 git commit -m 'Test commit to trigger webhook'1491 git push origin master1492 1493buildbot # [ 42.223549] gitea[890]: 2026/08/30 07:51:18 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:35496, 401 Unauthorized in 6.9ms @ repo/githttp.go:455(repo.GetInfoRefs)1494buildbot # [ 42.252415] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-dependency-failed1495buildbot # [ 42.257184] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-cached-failure1496buildbot # [ 42.260160] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-register-gcroot1497buildbot # [ 42.263916] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-failed-eval1498buildbot # [ 42.266779] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-build1499buildbot # [ 42.269560] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-scheduled-effect1500buildbot # [ 42.275131] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-eval1501buildbot # [ 42.277895] twistd[1160]: 2026-08-30T07:51:18+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-effect1502buildbot # [ 42.280982] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1503buildbot # [ 42.284644] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1504buildbot # [ 42.286717] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1505buildbot # [ 42.288719] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1506buildbot # [ 42.291316] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1507buildbot # [ 42.293993] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1508buildbot # [ 42.296136] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1509buildbot # [ 42.298197] twistd[1161]: 2026-08-30T07:51:18+0000 [Broker,client] message from master: attached1510buildbot # [ 42.314586] twistd[1160]: 2026-08-30T07:51:18+0000 [-] configuration update complete (took 0.671 seconds)1511buildbot # [ 42.327506] gitea[890]: 2026/08/30 07:51:18 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:35496, 200 OK in 96.8ms @ repo/githttp.go:455(repo.GetInfoRefs)1512buildbot # Enumerating objects: 5, done.1513buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1514buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1515buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 347 bytes | 173.00 KiB/s, done.1516buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)1517buildbot # [ 42.615913] gitea[890]: 2026/08/30 07:51:18 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 5.4ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1518buildbot # [ 42.970553] gitea[890]: 2026/08/30 07:51:18 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 38.6ms @ private/hook_post_receive.go:101(private.HookPostReceive)1519buildbot # [ 42.994372] gitea[890]: 2026/08/30 07:51:19 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:35496, 200 OK in 626.1ms @ repo/githttp.go:438(repo.ServiceReceivePack)1520buildbot # To http://localhost:3742/gitea-admin/test-flake.git1521buildbot # f3e8722..5aed03f master -> master1522buildbot: (finished: must succeed: 1523 cd /tmp/test-flake1524 echo '# Updated via webhook test' >> flake.nix1525 git add flake.nix1526 git commit -m 'Test commit to trigger webhook'1527 git push origin master1528 , in 0.94 seconds)1529(finished: subtest: Push new commit to trigger webhook, in 0.94 seconds)1530subtest: Webhook triggers nix-eval build1531buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1532buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1533buildbot # Dload Upload Total Spent Left Speed1534buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 9188 0 0100 411 100 411 0 0 6858 0 0100 411 100 411 0 0 5468 0 01535buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1536buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1537buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1538buildbot # Dload Upload Total Spent Left Speed1539buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 17025 0 0100 937 100 937 0 0 13895 0 0100 937 100 937 0 0 12106 0 01540buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.15 seconds)1541buildbot # [ 44.042458] twistd[1160]: 2026-08-30T07:51:20+0000 [_GenericHTTPChannelProtocol,6,127.0.0.1] Received event 'push' from gitea1542buildbot # [ 44.067840] twistd[1160]: 2026-08-30T07:51:20+0000 [-] added change with revision 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 to database1543buildbot # [ 44.070517] twistd[1160]: 2026-08-30T07:51:20+0000 [-] injected change 11544buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1545buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1546buildbot # Dload Upload Total Spent Left Speed1547buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 6874 0 0100 411 100 411 0 0 5254 0 0100 411 100 411 0 0 4229 0 01548buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds)1549buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1550buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1551buildbot # Dload Upload Total Spent Left Speed1552buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25121 0 0100 937 100 937 0 0 19799 0 0100 937 100 937 0 0 16386 0 01553buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1554buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1555buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1556buildbot # Dload Upload Total Spent Left Speed1557buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 10905 0 0100 411 100 411 0 0 8585 0 0100 411 100 411 0 0 7114 0 01558buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1559buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1560buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1561buildbot # Dload Upload Total Spent Left Speed1562buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25643 0 0100 937 100 937 0 0 20066 0 0100 937 100 937 0 0 16548 0 01563buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1564buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1565buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1566buildbot # Dload Upload Total Spent Left Speed1567buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 10203 0 0100 411 100 411 0 0 8164 0 0100 411 100 411 0 0 6824 0 01568buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1569buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1570buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1571buildbot # Dload Upload Total Spent Left Speed1572buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25639 0 0100 937 100 937 0 0 20118 0 0100 937 100 937 0 0 16582 0 01573buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1574buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1575buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1576buildbot # Dload Upload Total Spent Left Speed1577buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 10729 0 0100 411 100 411 0 0 8518 0 0100 411 100 411 0 0 7078 0 01578buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1579buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1580buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1581buildbot # Dload Upload Total Spent Left Speed1582buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26123 0 0100 937 100 937 0 0 20374 0 0100 937 100 937 0 0 16655 0 01583buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1584buildbot # [ 49.108429] twistd[1160]: 2026-08-30T07:51:25+0000 [-] added buildset 2 to database1585buildbot # [ 49.263750] twistd[1160]: 2026-08-30T07:51:25+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1586buildbot # [ 49.274601] twistd[1160]: 2026-08-30T07:51:25+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild1587buildbot # [ 49.337627] twistd[1160]: 2026-08-30T07:51:25+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1588buildbot # [ 49.343955] twistd[1160]: 2026-08-30T07:51:25+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1589buildbot # [ 49.348779] twistd[1160]: 2026-08-30T07:51:25+0000 [-] sending ping1590buildbot # [ 49.350667] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] message from master: ping1591buildbot # [ 49.353459] twistd[1160]: 2026-08-30T07:51:25+0000 [Broker,0,127.0.0.1] ping finished: success1592buildbot # [ 49.378067] twistd[1160]: 2026-08-30T07:51:25+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1593buildbot # [ 49.380562] twistd[1160]: 2026-08-30T07:51:25+0000 [-] command '['git', '--version']' in dir 'build'1594buildbot # [ 49.383410] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 0): startCommand:shell1595buildbot # [ 49.387088] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1596buildbot # [ 49.391095] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', '--version']): git --version1597buildbot # [ 49.393441] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1598buildbot # [ 49.397271] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1599buildbot # [ 49.399734] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1600buildbot # [ 49.402417] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', '--version']): using PTY: False1601buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1602buildbot # [ 49.425117] twistd[1161]: 2026-08-30T07:51:25+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0190331603buildbot # [ 49.428300] twistd[1161]: 2026-08-30T07:51:25+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f762900>1604buildbot # [ 49.452104] twistd[1160]: 2026-08-30T07:51:25+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01605buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1606buildbot # Dload Upload Total Spent Left Speed1607buildbot # 0 0 [ 49.519824] twistd[1160]: 2026-08-30T07:51:25+0000 [-] <RemoteCommand 'stat' at 132516791576832>: RemoteCommand.run [1]1608buildbot # [ 49.523113] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 1): startCommand:stat1609buildbot # 0 0 0 [ 49.529093] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'1610buildbot # [ 49.534987] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x742d1fe3bb60>1611buildbot # 0 0 [ 49.541742] twistd[1160]: 2026-08-30T07:51:25+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132516791576832> rc=21612buildbot # 0 0100 760 100 760 0 0 11110 0 0100 760 100 760 0 0 9252 0 [ 49.578216] twistd[1160]: 2026-08-30T07:51:25+0000 [-] <RemoteCommand 'listdir' at 132516789837072>: RemoteCommand.run [2]1613buildbot # [ 49.582680] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 2): startCommand:listdir1614buildbot # 01[ 49.587696] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x742d1f761010>1615buildbot # [ 49.591866] twistd[1160]: 2026-08-30T07:51:25+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 132516789837072> rc=01616buildbot # 00 760 100 760 0 0 7502 0 01617buildbot # [ 49.611381] twistd[1160]: 2026-08-30T07:51:25+0000 [-] No git repo present, making full clone1618buildbot # [ 49.614233] twistd[1160]: 2026-08-30T07:51:25+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [3]1619buildbot # [ 49.618964] twistd[1160]: 2026-08-30T07:51:25+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'1620buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.20 seconds)1621buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1622buildbot # [ 49.641170] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command 3): startCommand:shell1623buildbot # [ 49.646905] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand1624buildbot # [ 49.651595] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake . --progress1625buildbot # [ 49.658125] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1626buildbot # [ 49.664769] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}1627buildbot # [ 49.669574] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']1628buildbot # [ 49.676664] twistd[1161]: 2026-08-30T07:51:25+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False1629buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1630buildbot # Dload Upload Total Spent Left Speed1631buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 16627 0 0100 937 100 937 0 0 12833 0 0100 937 100 937 0[ 49.811530] gitea[890]: 2026/08/30 07:51:25 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:43964, 200 OK in 32.9ms @ repo/githttp.go:455(repo.GetInfoRefs)1632buildbot # 0 10546 0 01633buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.21 seconds)1634buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1635buildbot # [ 49.839621] gitea[890]: 2026/08/30 07:51:25 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:43964, 200 OK in 21.2ms @ repo/githttp.go:433(repo.ServiceUploadPack)1636buildbot # [ 49.878117] gitea[890]: 2026/08/30 07:51:25 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:43964, 200 OK in 26.1ms @ repo/githttp.go:433(repo.ServiceUploadPack)1637buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1638buildbot # Dload Upload Total Spent Left Speed1639buildbot # 0 0 0 0 0 0 0 0 0[ 49.945377] twistd[1161]: 2026-08-30T07:51:25+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.2987241640buildbot # [ 49.950767] twistd[1161]: 2026-08-30T07:51:25+0000 [-] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7196d0>1641buildbot # [ 49.958239] twistd[1160]: 2026-08-30T07:51:25+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=01642buildbot # 100 1401 100 1401 0 0 20423 0 0100 1401 100 1401 0 0 16927 0 0100 1401 100 1401 0 0 14477 0 01643buildbot # [ 50.014164] twistd[1160]: 2026-08-30T07:51:26+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']'>: RemoteCommand.run [4]1644buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.19 seconds)1645buildbot # [ 50.019391] twistd[1160]: 2026-08-30T07:51:26+0000 [-] command '['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']' in dir 'build'1646buildbot # [ 50.022397] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command 4): startCommand:shell1647buildbot # [ 50.026248] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): RunProcess._startCommand1648buildbot # [ 50.029596] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): git checkout -f 5aed03f4128bbe5f2d1015d8b17342f43cb23f241649buildbot # [ 50.033514] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1650buildbot # [ 50.038205] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): watching logfiles {}1651buildbot # [ 50.043112] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): argv: [b'git', b'checkout', b'-f', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24']1652buildbot # [ 50.047453] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): using PTY: False1653buildbot # [ 50.073619] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): command finished with signal None, exit code 0, elapsedTime: 0.0316511654buildbot # [ 50.077874] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f71a850>1655buildbot # [ 50.096046] twistd[1160]: 2026-08-30T07:51:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']'> rc=01656buildbot # [ 50.123425] twistd[1160]: 2026-08-30T07:51:26+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [5]1657buildbot # [ 50.126953] twistd[1160]: 2026-08-30T07:51:26+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1658buildbot # [ 50.142050] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command 5): startCommand:shell1659buildbot # [ 50.144596] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1660buildbot # [ 50.149934] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive1661buildbot # [ 50.153357] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1662buildbot # [ 50.157740] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1663buildbot # [ 50.160781] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']1664buildbot # [ 50.164620] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False1665buildbot # [ 50.310371] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1611651666buildbot # [ 50.315169] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd0a650>1667buildbot # [ 50.320781] twistd[1160]: 2026-08-30T07:51:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=01668buildbot # [ 50.340481] twistd[1160]: 2026-08-30T07:51:26+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [6]1669buildbot # [ 50.343744] twistd[1160]: 2026-08-30T07:51:26+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1670buildbot # [ 50.366341] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command 6): startCommand:shell1671buildbot # [ 50.369204] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1672buildbot # [ 50.372348] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1673buildbot # [ 50.374967] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1674buildbot # [ 50.378994] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1675buildbot # [ 50.384412] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1676buildbot # [ 50.387378] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1677buildbot # [ 50.407046] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0242071678buildbot # [ 50.410604] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd0ab10>1679buildbot # [ 50.436817] twistd[1160]: 2026-08-30T07:51:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01680buildbot # [ 50.460858] twistd[1160]: 2026-08-30T07:51:26+0000 [-] Got Git revision 5aed03f4128bbe5f2d1015d8b17342f43cb23f241681buildbot # [ 50.471124] twistd[1160]: 2026-08-30T07:51:26+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []1682buildbot # [ 50.490750] twistd[1160]: 2026-08-30T07:51:26+0000 [-] step 'git' complete: success (None)1683buildbot # [ 50.499571] twistd[1160]: 2026-08-30T07:51:26+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7885f8498690>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7885f849d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7885f849d010>)])1684buildbot # [ 50.523156] twistd[1160]: 2026-08-30T07:51:26+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [7]1685buildbot # [ 50.526589] twistd[1160]: 2026-08-30T07:51:26+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1686buildbot # [ 50.531450] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command 7): startCommand:shell1687buildbot # [ 50.535350] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1688buildbot # [ 50.539197] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1689buildbot # [ 50.546234] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1690buildbot # [ 50.551080] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1691buildbot # [ 50.554477] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1692buildbot # [ 50.559096] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1693buildbot # [ 50.595969] twistd[1160]: 2026-08-30T07:51:26+0000 [twisted.web.client._HTTP11ClientFactory#info] Starting factory _HTTP11ClientFactory(<function HTTPConnectionPool._newConnection.<locals>.quiescentCallback at 0x7885f83a2140>, <HostnameEndpoint localhost:3742>)1694buildbot # [ 50.609604] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0633821695buildbot # [ 50.613880] twistd[1161]: 2026-08-30T07:51:26+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd2ab10>1696buildbot # [ 50.620093] twistd[1160]: 2026-08-30T07:51:26+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01697buildbot # [ 50.631507] twistd[1160]: 2026-08-30T07:51:26+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [8]1698buildbot # [ 50.639616] twistd[1160]: 2026-08-30T07:51:26+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1699buildbot # [ 50.649051] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command 8): startCommand:shell1700buildbot # [ 50.651860] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1701buildbot # [ 50.659881] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1702buildbot # [ 50.672676] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1703buildbot # [ 50.682074] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1704buildbot # [ 50.689691] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1705buildbot # [ 50.704228] twistd[1161]: 2026-08-30T07:51:26+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1706buildbot # [ 50.770544] gitea[890]: 2026/08/30 07:51:26 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/5aed03f4128bbe5f2d1015d8b17342f43cb23f24 for [::1]:43980, 201 Created in 165.3ms @ repo/status.go:21(repo.NewCommitStatus)1707buildbot # [ 50.995508] systemd[1]: Started Nix Daemon.1708buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1709buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1710buildbot # Dload Upload Total Spent Left Speed1711buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 13820 0 0100 760 100 760 0 0 10816 0 0100 760 100 760 0 0 8896 0 [ 51.169487] nix-daemon[1426]: accepted connection from pid 1421, user buildbot-worker1712buildbot # 01713buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1714buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1715buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1716buildbot # Dload Upload Total Spent Left Speed1717buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26187 0 0100 937 100 937 0 0 20283 0 0100 937 100 937 0 0 16696 0 01718buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1719buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1720buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1721buildbot # Dload Upload Total Spent Left Speed1722buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 49445 0 0100 1735 100 1735 0 0 38268 0 0100 1735 100 1735 0 0 31414 0 01723buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1724buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1725buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1726buildbot # Dload Upload Total Spent Left Speed1727buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 18059 0 0100 760 100 760 0 0 14623 0 0100 760 100 760 0 0 12308 0 01728buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1729buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1730buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1731buildbot # Dload Upload Total Spent Left Speed1732buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25844 0 0100 937 100 937 0 0 19895 0 0100 937 100 937 0 0 16236 0 01733buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1734buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1735buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1736buildbot # Dload Upload Total Spent Left Speed1737buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 43573 0 0100 1735 100 1735 0 0 34676 0 0100 1735 100 1735 0 0 28980 0 01738buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1739buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1740buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1741buildbot # Dload Upload Total Spent Left Speed1742buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 21052 0 0100 760 100 760 0 0 16533 0 0100 760 100 760 0 0 13642 0 01743buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1744buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1745buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1746buildbot # Dload Upload Total Spent Left Speed1747buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25887 0 0100 937 100 937 0 0 20365 0 0100 937 100 937 0 0 16796 0 01748buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1749buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1750buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1751buildbot # Dload Upload Total Spent Left Speed1752buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 48358 0 0100 1735 100 1735 0 0 37545 0 0100 1735 100 1735 0 0 30961 0 01753buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.11 seconds)1754buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1755buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1756buildbot # Dload Upload Total Spent Left Speed1757buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 17929 0 0100 760 100 760 0 0 14350 0 0100 760 100 760 0 0 12066 0 01758buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1759buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1760buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1761buildbot # Dload Upload Total Spent Left Speed1762buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26980 0 0100 937 100 937 0 0 21048 0 0100 937 100 937 0 0 17241 0 01763buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1764buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1765buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1766buildbot # Dload Upload Total Spent Left Speed1767buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 48193 0 0100 1735 100 1735 0 0 37638 0 0100 1735 100 1735 0 0 30934 0 01768buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.11 seconds)1769buildbot # [ 56.001504] nix-daemon[1426]: accepted connection from pid 1471, user buildbot-worker1770buildbot # [ 56.035949] nix-daemon[1426]: accepted connection from pid 1421, user buildbot-worker1771buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1772buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1773buildbot # Dload Upload Total Spent Left Speed1774buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 18122 0 0100 760 100 760 0 0 14596 0 0100 760 100 760 0 0 12274 0 01775buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1776buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1777buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1778buildbot # Dload Upload Total Spent Left Speed1779buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26017 0 0100 937 100 937 0 0 20315 0 0100 937 100 937 0 0 16753 0 01780buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1781buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1782buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1783buildbot # Dload Upload Total Spent Left Speed1784buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 48078 0 0100 1735 100 1735 0 0 37695 0 0100 1735 100 1735 0 0 30365 0 01785buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1786buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1787buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1788buildbot # Dload Upload Total Spent Left Speed1789buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 18161 0 0100 760 100 760 0 0 14642 0 0100 760 100 760 0 0 12323 0 01790buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1791buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1792buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1793buildbot # Dload Upload Total Spent Left Speed1794buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26663 0 0100 937 100 937 0 0 20838 0 0100 937 100 937 0 0 16977 0 01795buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1796buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1797buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1798buildbot # Dload Upload Total Spent Left Speed1799buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 49268 0 0100 1735 100 1735 0 0 38332 0 0100 1735 100 1735 0 0 31500 0 01800buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1801buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1802buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1803buildbot # Dload Upload Total Spent Left Speed1804buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 19537 0 0100 760 100 760 0 0 15483 0 0100 760 100 760 0 0 12896 0 01805buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1806buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1807buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1808buildbot # Dload Upload Total Spent Left Speed1809buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26654 0 0100 937 100 937 0 0 20803 0 0100 937 100 937 0 0 17092 0 01810buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1811buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1812buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1813buildbot # Dload Upload Total Spent Left Speed1814buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 48759 0 0100 1735 100 1735 0 0 37926 0 0100 1735 100 1735 0 0 31257 0 01815buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.11 seconds)1816buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1817buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1818buildbot # Dload Upload Total Spent Left Speed1819buildbot # 0 0 0 0 0 0 0 0 0[ 60.791476] twistd[1161]: 2026-08-30T07:51:36+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 10.0873831820buildbot # [ 60.799885] twistd[1161]: 2026-08-30T07:51:36+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fc8b8a0>1821buildbot # [ 60.807254] twistd[1160]: 2026-08-30T07:51:36+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01822buildbot # 100 760 100 760 0 0 9485 0 0100 760 100 760 0 0 8029 0 0100 760 100 760 0 0 6977 0 01823buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.21 seconds)1824buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1825buildbot # [ 60.890941] twistd[1160]: 2026-08-30T07:51:36+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7885f8498690>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7885f849d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7885f849d010>)]1826buildbot # [ 60.918418] twistd[1160]: 2026-08-30T07:51:36+0000 [-] step 'Evaluate flake' complete: success (None)1827buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1828buildbot # Dload Upload Total Spent Left Speed1829buildbot # 0 0 0 [ 61.016154] twistd[1160]: 2026-08-30T07:51:37+0000 [-] added buildset 3 to database1830buildbot # 0 0 0 0 0 0100 937 100 937 0 0 11340 0 0100 937 100 937 0 0 9271 0 0100 937 100 937 0 0 8050 0 01831buildbot # [ 61.101126] gitea[890]: 2026/08/30 07:51:37 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/5aed03f4128bbe5f2d1015d8b17342f43cb23f24 for [::1]:43980, 201 Created in 165.1ms @ repo/status.go:21(repo.NewCommitStatus)1832buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.24 seconds)1833buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1834buildbot # [ 61.173549] twistd[1160]: 2026-08-30T07:51:37+0000 [-] starting build <Build gitea-admin/test-flake/nix-build number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-build' worker='local-worker-000' state=AVAILABLE>1835buildbot # [ 61.178508] twistd[1160]: 2026-08-30T07:51:37+0000 [-] <Build gitea-admin/test-flake/nix-build number:None results:success>.startBuild1836buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1837buildbot # Dload Upload Total Spent Left Speed1838buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 24359 0 [ 61.275201] gitea[890]: 2026/08/30 07:51:37 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/5aed03f4128bbe5f2d1015d8b17342f43cb23f24 for [::1]:43980, 201 Created in 144.1ms @ repo/status.go:21(repo.NewCommitStatus)1839buildbot # 0100 1735 100 1735 0 0 18367 0 0100 1735 100 1735 0 0 16170 0 01840buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.21 seconds)1841buildbot # [ 61.346439] twistd[1160]: 2026-08-30T07:51:37+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1842buildbot # [ 61.351775] twistd[1160]: 2026-08-30T07:51:37+0000 [-] starting build <Build gitea-admin/test-flake/nix-build number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-build' worker='local-worker-000' state=BUILDING>1843buildbot # [ 61.357810] twistd[1160]: 2026-08-30T07:51:37+0000 [-] sending ping1844buildbot # [ 61.359407] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] message from master: ping1845buildbot # [ 61.362132] twistd[1160]: 2026-08-30T07:51:37+0000 [Broker,0,127.0.0.1] ping finished: success1846buildbot # [ 61.384598] twistd[1160]: 2026-08-30T07:51:37+0000 [-] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']'>: RemoteCommand.run [9]1847buildbot # [ 61.390349] twistd[1160]: 2026-08-30T07:51:37+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']' in dir 'build'1848buildbot # [ 61.396608] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command 9): startCommand:shell1849buildbot # [ 61.402233] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): RunProcess._startCommand1850buildbot # [ 61.407950] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-x86_64-linux.test '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*'1851buildbot # [ 61.416281] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-build/build (timeout 10800 secs)1852buildbot # [ 61.423389] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): watching logfiles {}1853buildbot # [ 61.429147] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-x86_64-linux.test', b'/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']1854buildbot # [ 61.438485] twistd[1161]: 2026-08-30T07:51:37+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): using PTY: False1855buildbot # [ 61.539675] nix-daemon[1426]: accepted connection from pid 1523, user buildbot-worker1856buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1857buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1858buildbot # Dload Upload Total Spent Left Speed1859buildbot # 0 0 0 0 0 0 0 0 0100 1110 100 1110 0 0 29406 0 0100 1110 100 1110 0 0 23235 0 0100 1110 100 1110 0 0 19290 0 01860buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1861buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1862buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1863buildbot # Dload Upload Total Spent Left Speed1864buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26625 0 0100 937 100 937 0 0 20642 0 0100 937 100 937 0 0 16983 0 01865buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1866buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1867buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1868buildbot # Dload Upload Total Spent Left Speed1869buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 48080 0 0100 1735 100 1735 0 0 37725 0 0100 1735 100 1735 0 0 30620 0 01870buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1871buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1872buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1873buildbot # Dload Upload Total Spent Left Speed1874buildbot # 0 0 0 0 0 0 0 0 0100 1110 100 1110 0 0 28594 0 0100 1110 100 1110 0 0 22649 0 0100 1110 100 1110 0 0 18574 0 01875buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1876buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1877buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1878buildbot # Dload Upload Total Spent Left Speed1879buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 26571 0 0100 937 100 937 0 0 20661 0 0100 937 100 937 0 0 16935 0 01880buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1881buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1882buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1883buildbot # Dload Upload Total Spent Left Speed1884buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 48692 0 0100 1735 100 1735 0 0 37728 0 0100 1735 100 1735 0 0 30925 0 01885buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1886buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1887buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1888buildbot # Dload Upload Total Spent Left Speed1889buildbot # 0 0 0 0 0 0 0 0 0100 1110 100 1110 0 0 28756 0 0100 1110 100 1110 0 0 22702 0 0100 1110 100 1110 0 0 18849 0 01890buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1891buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1892buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1893buildbot # Dload Upload Total Spent Left Speed1894buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25319 0 0100 937 100 937 0 0 19917 0 0100 937 100 937 0 0 16486 0 01895buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)1896buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1897buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1898buildbot # Dload Upload Total Spent Left Speed1899buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 49286 0 0100 1735 100 1735 0 0 38211 0 0100 1735 100 1735 0 0 31352 0 01900buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)1901buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1902buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1903buildbot # Dload Upload Total Sp[ 66.566511] twistd[1161]: 2026-08-30T07:51:42+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']): command finished with signal None, exit code 0, elapsedTime: 5.1636871904buildbot # ent Le[ 66.574294] twistd[1161]: 2026-08-30T07:51:42+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fc8bbd0>1905buildbot # ft Speed1906buildbot # 0 0 0 0 0 [ 66.586258] twistd[1160]: 2026-08-30T07:51:42+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-x86_64-linux.test', '/nix/store/qkmhm672mkkyvgcjrhmx1llqiwwr5nqs-test.drv^*']'> rc=01907buildbot # 0 0 0 0100 1110 100 1110 0 0 15321 0 0100 1110 100 1110 0 0 13143 0 0100 1110 100 1110 0 0 11176 0 01908buildbot # [ 66.658609] twistd[1160]: 2026-08-30T07:51:42+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): []1909buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds)1910buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1911buildbot # [ 66.682492] twistd[1160]: 2026-08-30T07:51:42+0000 [-] step 'Build flake attr' complete: success (None)1912buildbot # [ 66.714131] twistd[1160]: 2026-08-30T07:51:42+0000 [-] added buildset 4 to database1913buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1914buildbot # Dload Upload Total Spent Left Speed1915buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 27285 0 0100 937 100 937 0 0 21123 0 0100 937 100 937 0 0 17270 0 01916buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.13 seconds)1917buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1918buildbot # [ 66.843460] twistd[1160]: 2026-08-30T07:51:42+0000 [-] starting build <Build gitea-admin/test-flake/nix-register-gcroot number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-register-gcroot' worker='local-worker-000' state=AVAILABLE>1919buildbot # [ 66.849873] twistd[1160]: 2026-08-30T07:51:42+0000 [-] <Build gitea-admin/test-flake/nix-register-gcroot number:None results:success>.startBuild1920buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1921buildbot # Dload Upload Total Spent Left Speed1922buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 35803 0 0100 1735 100 1735 0 0 27763 0 0100 1735 100 1735 0 0 23137 0 01923buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.16 seconds)1924buildbot # [ 66.968532] twistd[1160]: 2026-08-30T07:51:42+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1925buildbot # [ 66.973799] twistd[1160]: 2026-08-30T07:51:43+0000 [-] starting build <Build gitea-admin/test-flake/nix-register-gcroot number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-register-gcroot' worker='local-worker-000' state=BUILDING>1926buildbot # [ 66.979513] twistd[1160]: 2026-08-30T07:51:43+0000 [-] sending ping1927buildbot # [ 66.981872] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] message from master: ping1928buildbot # [ 66.984559] twistd[1160]: 2026-08-30T07:51:43+0000 [Broker,0,127.0.0.1] ping finished: success1929buildbot # [ 67.007580] twistd[1160]: 2026-08-30T07:51:43+0000 [-] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']'>: RemoteCommand.run [10]1930buildbot # [ 67.012757] twistd[1160]: 2026-08-30T07:51:43+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']' in dir 'build'1931buildbot # [ 67.018524] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command 10): startCommand:shell1932buildbot # [ 67.023953] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): RunProcess._startCommand1933buildbot # [ 67.029156] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test -r /nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test1934buildbot # [ 67.036567] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-register-gcroot/build (timeout 1200 secs)1935buildbot # [ 67.043260] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): watching logfiles {}1936buildbot # [ 67.048430] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', b'-r', b'/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']1937buildbot # [ 67.056348] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): using PTY: False1938buildbot # [ 67.150407] nix-daemon[1426]: accepted connection from pid 1575, user buildbot-worker1939buildbot # [ 67.173139] twistd[1161]: 2026-08-30T07:51:43+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']): command finished with signal None, exit code 0, elapsedTime: 0.1500701940buildbot # [ 67.179333] twistd[1161]: 2026-08-30T07:51:43+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd3b550>1941buildbot # [ 67.185581] twistd[1160]: 2026-08-30T07:51:43+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/x86_64-linux.test', '-r', '/nix/store/4896bsdcnh0yzqidnw7rid4p7dggplik-test']'> rc=01942buildbot # [ 67.219958] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(ShellCommand(name='Register gcroot', command=['nix-store', '--add-root', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/%(prop:attr)s'), '-r', Property(out_path)], logEnviron=False)): []1943buildbot # [ 67.235742] twistd[1160]: 2026-08-30T07:51:43+0000 [-] step 'Register gcroot' complete: success (None)1944buildbot # [ 67.237937] twistd[1160]: 2026-08-30T07:51:43+0000 [-] <Build gitea-admin/test-flake/nix-register-gcroot number:1 results:success>: build finished1945buildbot # [ 67.252833] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1946buildbot # [ 67.372400] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(Trigger(name='Register gcroot', waitForFinish=True, schedulerNames=['gitea-admin-test-flake-nix-register-gcroot'], haltOnFailure=True, flunkOnFailure=True, sourceStamps=[], alwaysUseLatest=False, updateSourceStamp=False, doStepIf=<function nix_build_steps.<locals>.<lambda> at 0x7885f847a350>, copy_properties=['out_path', 'attr'], set_properties={'report_status': False})): []1947buildbot # [ 67.388617] twistd[1160]: 2026-08-30T07:51:43+0000 [-] step 'Register gcroot' complete: success (None)1948buildbot # [ 67.403481] twistd[1160]: 2026-08-30T07:51:43+0000 [-] <RemoteShellCommand '['rm', '-f', 'result-x86_64-linux.test']'>: RemoteCommand.run [11]1949buildbot # [ 67.406372] twistd[1160]: 2026-08-30T07:51:43+0000 [-] command '['rm', '-f', 'result-x86_64-linux.test']' in dir 'build'1950buildbot # [ 67.412863] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command 11): startCommand:shell1951buildbot # [ 67.415042] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): RunProcess._startCommand1952buildbot # [ 67.417989] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): rm -f result-x86_64-linux.test1953buildbot # [ 67.420987] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-build/build (timeout 1200 secs)1954buildbot # [ 67.425260] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): watching logfiles {}1955buildbot # [ 67.428110] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): argv: [b'rm', b'-f', b'result-x86_64-linux.test']1956buildbot # [ 67.431421] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-f', 'result-x86_64-linux.test']): using PTY: False1957buildbot # [ 67.450378] twistd[1161]: 2026-08-30T07:51:43+0000 [-] (command ['rm', '-f', 'result-x86_64-linux.test']): command finished with signal None, exit code 0, elapsedTime: 0.0384181958buildbot # [ 67.454169] twistd[1161]: 2026-08-30T07:51:43+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd3bb50>1959buildbot # [ 67.479839] twistd[1160]: 2026-08-30T07:51:43+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-f', 'result-x86_64-linux.test']'> rc=01960buildbot # [ 67.507960] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(ShellCommand(name='Delete temporary gcroots', command=['rm', '-f', Interpolate('result-%(prop:attr)s')], logEnviron=False)): []1961buildbot # [ 67.518573] twistd[1160]: 2026-08-30T07:51:43+0000 [-] step 'Delete temporary gcroots' complete: success (None)1962buildbot # [ 67.521261] twistd[1160]: 2026-08-30T07:51:43+0000 [-] <Build gitea-admin/test-flake/nix-build number:1 results:success>: build finished1963buildbot # [ 67.532068] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1964buildbot # [ 67.685888] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1965buildbot # [ 67.713604] twistd[1160]: 2026-08-30T07:51:43+0000 [-] step 'build flake' complete: success (None)1966buildbot # [ 67.734549] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b6b90>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b6c40>)): []1967buildbot # [ 67.750522] twistd[1160]: 2026-08-30T07:51:43+0000 [-] step 'Process skipped builds' complete: skipped (None)1968buildbot # [ 67.769729] twistd[1160]: 2026-08-30T07:51:43+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1969buildbot # [ 67.773804] twistd[1160]: 2026-08-30T07:51:43+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'1970buildbot # [ 67.781403] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command 12): startCommand:shell1971buildbot # [ 67.785248] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1972buildbot # [ 67.789285] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/1973buildbot # [ 67.794546] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1974buildbot # [ 67.799933] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}1975buildbot # [ 67.804965] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']1976buildbot # [ 67.812194] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False1977buildbot # [ 67.836060] twistd[1161]: 2026-08-30T07:51:43+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0247091978buildbot # [ 67.841559] twistd[1161]: 2026-08-30T07:51:43+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd43d40>1979buildbot # [ 67.852621] gitea[890]: 2026/08/30 07:51:43 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/5aed03f4128bbe5f2d1015d8b17342f43cb23f24 for [::1]:43980, 201 Created in 176.2ms @ repo/status.go:21(repo.NewCommitStatus)1980buildbot # [ 67.862609] twistd[1160]: 2026-08-30T07:51:43+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=01981buildbot # [ 67.891152] twistd[1160]: 2026-08-30T07:51:43+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1982buildbot # [ 67.902972] twistd[1160]: 2026-08-30T07:51:43+0000 [-] step 'Cleanup drv paths' complete: success (None)1983buildbot # [ 67.917154] twistd[1160]: 2026-08-30T07:51:43+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [13]1984buildbot # [ 67.921704] twistd[1160]: 2026-08-30T07:51:43+0000 [-] command '['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'1985buildbot # [ 67.926951] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command 13): startCommand:shell1986buildbot # [ 67.930284] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand1987buildbot # [ 67.937151] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 --branch master --repo gitea-admin/test-flake1988buildbot # [ 67.943263] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1989buildbot # [ 67.949184] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}1990buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1991buildbot # [ 67.953664] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']1992buildbot # [ 67.960437] twistd[1161]: 2026-08-30T07:51:43+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False1993buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1994buildbot # Dload Upload Total Spent Left Speed1995buildbot # 0 0 0 0 0 0 0 0 0100 1479 100 1479 0 0 28515 0 0100 1479 100 1479 0 0 22000 0 0100 1479 100 1479 0 0 18124 0 01996buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1997buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1998buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1999buildbot # Dload Upload Total Spent Left Speed2000buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 17284 0 0100 937 100 937 0 0 13192 0 0100 937 100 937 0 0 11058 0 02001buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.16 seconds)2002buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2003buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2004buildbot # Dload Upload Total Spent Left Speed2005buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 38214 0 0100 2003 100 2003 0 0 29516 0 0100 2003 100 2003 0 0 24092 0 02006buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.16 seconds)2007buildbot # [ 68.507422] nix-daemon[1426]: accepted connection from pid 1609, user buildbot-worker2008buildbot # [ 68.550113] twistd[1161]: 2026-08-30T07:51:44+0000 [-] (command ['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.6132572009buildbot # [ 68.555340] twistd[1161]: 2026-08-30T07:51:44+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f79c320>2010buildbot # [ 68.562098] twistd[1160]: 2026-08-30T07:51:44+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=02011buildbot # [ 68.606948] twistd[1160]: 2026-08-30T07:51:44+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b7110>, logEnviron=False)): []2012buildbot # [ 68.621835] twistd[1160]: 2026-08-30T07:51:44+0000 [-] step 'Evaluate effects' complete: success (None)2013buildbot # [ 68.658716] twistd[1160]: 2026-08-30T07:51:44+0000 [-] added buildset 5 to database2014buildbot # [ 68.727805] gitea[890]: 2026/08/30 07:51:44 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/5aed03f4128bbe5f2d1015d8b17342f43cb23f24 for [::1]:43980, 201 Created in 72.2ms @ repo/status.go:21(repo.NewCommitStatus)2015buildbot # [ 68.784528] twistd[1160]: 2026-08-30T07:51:44+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>2016buildbot # [ 68.789687] twistd[1160]: 2026-08-30T07:51:44+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild2017buildbot # [ 68.852966] twistd[1160]: 2026-08-30T07:51:44+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2018buildbot # [ 68.858084] twistd[1160]: 2026-08-30T07:51:44+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>2019buildbot # [ 68.863612] twistd[1160]: 2026-08-30T07:51:44+0000 [-] sending ping2020buildbot # [ 68.866373] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] message from master: ping2021buildbot # [ 68.868656] twistd[1160]: 2026-08-30T07:51:44+0000 [Broker,0,127.0.0.1] ping finished: success2022buildbot # [ 68.890627] twistd[1160]: 2026-08-30T07:51:44+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [14]2023buildbot # [ 68.893180] twistd[1160]: 2026-08-30T07:51:44+0000 [-] command '['git', '--version']' in dir 'build'2024buildbot # [ 68.896052] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command 14): startCommand:shell2025buildbot # [ 68.899075] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2026buildbot # [ 68.903256] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): git --version2027buildbot # [ 68.905608] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2028buildbot # [ 68.909505] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2029buildbot # [ 68.911978] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2030buildbot # [ 68.915119] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): environment:2031buildbot # [ 68.917479] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2032buildbot # [ 68.919328] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2033buildbot # [ 68.921444] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2034buildbot # [ 68.924705] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2035buildbot # [ 68.926556] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2036buildbot # [ 68.929097] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2037buildbot # [ 68.930945] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2038buildbot # [ 68.932415] twistd[1161]: 'LANG': 'en_US.UTF-8',2039buildbot # [ 68.933712] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2040buildbot # [ 68.936601] twistd[1161]: 'LOGNAME': 'buildbot-worker',2041buildbot # [ 68.939244] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2042buildbot # [ 68.940940] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2043buildbot # [ 68.943530] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2044buildbot # [ 68.946350] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2045buildbot # [ 68.982182] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2046buildbot # [ 68.986114] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2047buildbot # [ 68.987532] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2048buildbot # [ 68.990358] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2049buildbot # [ 68.992715] twistd[1161]: 'SHLVL': '0',2050buildbot # [ 68.993835] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2051buildbot # [ 68.995244] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2052buildbot # [ 68.997607] twistd[1161]: 'USER': 'buildbot-worker',2053buildbot # [ 69.000106] twistd[1161]: 'WORKER_COUNT': '0',2054buildbot # [ 69.001453] twistd[1161]: 'WORKER_NAME': 'local-worker',2055buildbot # [ 69.002910] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2056buildbot # [ 69.005428] twistd[1161]: 2026-08-30T07:51:44+0000 [Broker,client] (command ['git', '--version']): using PTY: False2057buildbot # [ 69.020104] twistd[1161]: 2026-08-30T07:51:45+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0961692058buildbot # [ 69.023229] twistd[1161]: 2026-08-30T07:51:45+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7692b0>2059buildbot # [ 69.035930] twistd[1160]: 2026-08-30T07:51:45+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02060buildbot # [ 69.060800] twistd[1160]: 2026-08-30T07:51:45+0000 [-] <RemoteCommand 'stat' at 132516788687632>: RemoteCommand.run [15]2061buildbot # [ 69.066098] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 15): startCommand:stat2062buildbot # [ 69.068254] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 15): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'2063buildbot # [ 69.074214] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 15): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x742d1f71aad0>2064buildbot # [ 69.077955] twistd[1160]: 2026-08-30T07:51:45+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132516788687632> rc=22065buildbot # [ 69.091394] twistd[1160]: 2026-08-30T07:51:45+0000 [-] <RemoteCommand 'listdir' at 132516788684112>: RemoteCommand.run [16]2066buildbot # [ 69.107095] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 16): startCommand:listdir2067buildbot # [ 69.109261] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 16): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x742d1f71ac10>2068buildbot # [ 69.113810] twistd[1160]: 2026-08-30T07:51:45+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 132516788684112> rc=02069buildbot # [ 69.122839] twistd[1160]: 2026-08-30T07:51:45+0000 [-] No git repo present, making full clone2070buildbot # [ 69.124806] twistd[1160]: 2026-08-30T07:51:45+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [17]2071buildbot # [ 69.129448] twistd[1160]: 2026-08-30T07:51:45+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'2072buildbot # [ 69.158077] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 17): startCommand:shell2073buildbot # [ 69.160633] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand2074buildbot # [ 69.166091] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake . --progress2075buildbot # [ 69.172610] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2076buildbot # [ 69.178664] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}2077buildbot # [ 69.184146] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']2078buildbot # [ 69.191309] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): environment:2079buildbot # [ 69.195829] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2080buildbot # [ 69.199259] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2081buildbot # [ 69.201384] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2082buildbot # [ 69.202944] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2083buildbot # [ 69.204799] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2084buildbot # [ 69.207257] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2085buildbot # [ 69.209136] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2086buildbot # [ 69.211132] twistd[1161]: 'LANG': 'en_US.UTF-8',2087buildbot # [ 69.212449] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2088buildbot # [ 69.215346] twistd[1161]: 'LOGNAME': 'buildbot-worker',2089buildbot # [ 69.216747] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2090buildbot # [ 69.219267] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2091buildbot # [ 69.221828] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2092buildbot # [ 69.223775] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2093buildbot # [ 69.263306] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2094buildbot # [ 69.265730] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2095buildbot # [ 69.267188] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2096buildbot # [ 69.270435] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2097buildbot # [ 69.272303] twistd[1161]: 'SHLVL': '0',2098buildbot # [ 69.273805] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2099buildbot # [ 69.275381] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2100buildbot # [ 69.279262] twistd[1161]: 'USER': 'buildbot-worker',2101buildbot # [ 69.280637] twistd[1161]: 'WORKER_COUNT': '0',2102buildbot # [ 69.281980] twistd[1161]: 'WORKER_NAME': 'local-worker',2103buildbot # [ 69.283455] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2104buildbot # [ 69.285935] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False2105buildbot # [ 69.367848] gitea[890]: 2026/08/30 07:51:45 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:55764, 200 OK in 11.4ms @ repo/githttp.go:455(repo.GetInfoRefs)2106buildbot # [ 69.384355] gitea[890]: 2026/08/30 07:51:45 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:55764, 200 OK in 10.2ms @ repo/githttp.go:433(repo.ServiceUploadPack)2107buildbot # [ 69.417826] gitea[890]: 2026/08/30 07:51:45 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:55764, 200 OK in 24.0ms @ repo/githttp.go:433(repo.ServiceUploadPack)2108buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2109buildbot # [ 69.460969] twistd[1161]: 2026-08-30T07:51:45+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.2626452110buildbot # [ 69.467109] twistd[1161]: 2026-08-30T07:51:45+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f769550>2111buildbot # [ 69.475212] twistd[1160]: 2026-08-30T07:51:45+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=02112buildbot # [ 69.510510] twistd[1160]: 2026-08-30T07:51:45+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']'>: RemoteCommand.run [18]2113buildbot # [ 69.514201] twistd[1160]: 2026-08-30T07:51:45+0000 [-] command '['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']' in dir 'build'2114buildbot # [ 69.519098] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 18): startCommand:shell2115buildbot # [ 69.523103] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): RunProcess._startCommand2116buildbot # [ 69.526457] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): git checkout -f 5aed03f4128bbe5f2d1015d8b17342f43cb23f242117buildbot # [ 69.531182] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2118buildbot # % Tota[ 69.538091] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): watching logfiles {}2119buildbot # [ 69.541395] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): argv: [b'git', b'checkout', b'-f', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24']2120buildbot # [ 69.545644] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): environment:2121buildbot # [ 69.548809] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2122buildbot # [ 69.552124] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2123buildbot # [ 69.554261] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2124buildbot # [ 69.555780] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2125buildbot # l % Received % X[ 69.560204] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2126buildbot # [ 69.562587] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2127buildbot # [ 69.564502] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2128buildbot # [ 69.565914] twistd[1161]: 'LANG': 'en_US.UTF-8',2129buildbot # [ 69.568270] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2130buildbot # [ 69.571183] twistd[1161]: 'LOGNAME': 'buildbot-worker',2131buildbot # [ 69.572589] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2132buildbot # ferd Average [ 69.576192] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2133buildbot # [ 69.578770] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2134buildbot # [ 69.580721] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2135buildbot # Speed Time [ 69.620422] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2136buildbot # [ 69.622867] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2137buildbot # [ 69.625277] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2138buildbot # [ 69.628067] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2139buildbot # [ 69.629701] twistd[1161]: 'SHLVL': '0',2140buildbot # [ 69.630810] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2141buildbot # Time Time Cu[ 69.633903] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2142buildbot # [ 69.638646] twistd[1161]: 'USER': 'buildbot-worker',2143buildbot # [ 69.640075] twistd[1161]: 'WORKER_COUNT': '0',2144buildbot # rrent2145buildbot # [ 69.644282] twistd[1161]: 'WORKER_NAME': 'local-worker',2146buildbot # [ 69.645924] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2147buildbot # [ 69.648392] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): using PTY: False2148buildbot # Dload Upload Total Spent Left Speed2149buildbot # 0 0 0 0 0 0 0 0 0[ 69.685219] twistd[1161]: 2026-08-30T07:51:45+0000 [-] (command ['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): command finished with signal None, exit code 0, elapsedTime: 0.1461422150buildbot # [ 69.689232] twistd[1161]: 2026-08-30T07:51:45+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1fd6e4e0>2151buildbot # [ 69.695806] twistd[1160]: 2026-08-30T07:51:45+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']'> rc=02152buildbot # 100 1829 100 1829 0 0 10142 0 0100 1829 100 1829 0 0 9332 0 0100 1829 100 1829 0 0 8723 0 02153buildbot # [ 69.752155] twistd[1160]: 2026-08-30T07:51:45+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [19]2154buildbot # [ 69.755314] twistd[1160]: 2026-08-30T07:51:45+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'2155buildbot # [ 69.758088] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command 19): startCommand:shell2156buildbot # [ 69.761802] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand2157buildbot # [ 69.766253] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive2158buildbot # [ 69.769633] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2159buildbot # [ 69.774201] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}2160buildbot # [ 69.777787] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']2161buildbot # [ 69.781945] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): environment:2162buildbot # [ 69.785232] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2163buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.36 seconds)2164buildbot # [ 69.788764] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2165buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2166buildbot # [ 69.790791] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2167buildbot # [ 69.793126] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2168buildbot # [ 69.794928] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2169buildbot # [ 69.797665] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2170buildbot # [ 69.799902] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2171buildbot # [ 69.801939] twistd[1161]: 'LANG': 'en_US.UTF-8',2172buildbot # [ 69.804133] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2173buildbot # [ 69.806979] twistd[1161]: 'LOGNAME': 'buildbot-worker',2174buildbot # [ 69.808431] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2175buildbot # [ 69.810457] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2176buildbot # [ 69.813604] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2177buildbot # [ 69.817404] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2178buildbot # [ 69.854320] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2179buildbot # [ 69.857793] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2180buildbot # [ 69.860477] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2181buildbot # [ 69.863975] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2182buildbot # [ 69.867506] twistd[1161]: 'SHLVL': '0',2183buildbot # [ 69.869878] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2184buildbot # [ 69.871678] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2185buildbot # [ 69.874308] twistd[1161]: 'USER': 'buildbot-worker',2186buildbot # [ 69.876160] twistd[1161]: 'WORKER_COUNT': '0',2187buildbot # [ 69.879542] twistd[1161]: 'WORKER_NAME': 'local-worker',2188buildbot # [ 69.881074] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2189buildbot # [ 69.883529] twistd[1161]: 2026-08-30T07:51:45+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False2190buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2191buildbot # Dload Upload Total Spent Left Speed2192buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 16932 0 0100 937 100 937 0 0 13243 0 0100 937 100 937 0 0 10914 0 02193buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.25 seconds)2194buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2195buildbot # [ 70.069943] twistd[1161]: 2026-08-30T07:51:46+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.2822992196buildbot # [ 70.074389] twistd[1161]: 2026-08-30T07:51:46+0000 [-] (command 19): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f734c50>2197buildbot # [ 70.083327] twistd[1160]: 2026-08-30T07:51:46+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=02198buildbot # % Total % Received % Xferd Average Speed Time Time [ 70.117201] twistd[1160]: 2026-08-30T07:51:46+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [20]2199buildbot # [ 70.119842] twistd[1160]: 2026-08-30T07:51:46+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'2200buildbot # [ 70.123188] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command 20): startCommand:shell2201buildbot # Time Curr[ 70.128706] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand2202buildbot # [ 70.131362] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD2203buildbot # [ 70.133910] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2204buildbot # [ 70.137930] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}2205buildbot # ent2206buildbot # [ 70.144489] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']2207buildbot # [ 70.147435] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:2208buildbot # [ 70.149886] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2209buildbot # [ 70.151688] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2210buildbot # [ 70.153992] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2211buildbot # [ 70.155545] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2212buildbot # [ 70.157425] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2213buildbot # D[ 70.163204] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2214buildbot # [ 70.165064] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2215buildbot # [ 70.166453] twistd[1161]: 'LANG': 'en_US.UTF-8',2216buildbot # [ 70.167754] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2217buildbot # [ 70.172795] twistd[1161]: 'LOGNAME': 'buildbot-worker',2218buildbot # [ 70.174636] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2219buildbot # [ 70.176375] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2220buildbot # load Upload Tot[ 70.181414] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2221buildbot # [ 70.183387] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2222buildbot # [ 70.220302] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2223buildbot # al Spent [ 70.224223] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2224buildbot # [ 70.225588] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2225buildbot # [ 70.228422] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2226buildbot # Left Speed2227buildbot # [ 70.233233] twistd[1161]: 'SHLVL': '0',2228buildbot # [ 70.234375] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2229buildbot # [ 70.235786] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2230buildbot # 0 0 0 [ 70.242064] twistd[1161]: 'USER': 'buildbot-worker',2231buildbot # [ 70.243437] twistd[1161]: 'WORKER_COUNT': '0',2232buildbot # [ 70.244710] twistd[1161]: 'WORKER_NAME': 'local-worker',2233buildbot # [ 70.246170] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2234buildbot # 0 [ 70.249381] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False2235buildbot # 0 0 0 0 0100 2003 100 2003 0 0 122[ 70.275487] twistd[1161]: 2026-08-30T07:51:46+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.1313652236buildbot # [ 70.278727] twistd[1161]: 2026-08-30T07:51:46+0000 [-] (command 20): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7350d0>2237buildbot # 89 0 0100 20[ 70.291889] twistd[1160]: 2026-08-30T07:51:46+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=02238buildbot # 03 100 2003 0 0 10771 0 0100 2003 100 2003 0 0 9844 0 02239buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.30 seconds)2240buildbot # [ 70.334973] twistd[1160]: 2026-08-30T07:51:46+0000 [-] Got Git revision 5aed03f4128bbe5f2d1015d8b17342f43cb23f242241buildbot # [ 70.345787] twistd[1160]: 2026-08-30T07:51:46+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []2242buildbot # [ 70.363758] twistd[1160]: 2026-08-30T07:51:46+0000 [-] step 'git' complete: success (None)2243buildbot # [ 70.376967] twistd[1160]: 2026-08-30T07:51:46+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [21]2244buildbot # [ 70.381774] twistd[1160]: 2026-08-30T07:51:46+0000 [-] command '['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'2245buildbot # [ 70.388227] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command 21): startCommand:shell2246buildbot # [ 70.390348] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand2247buildbot # [ 70.397920] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 --branch master --repo gitea-admin/test-flake test-effect2248buildbot # [ 70.404442] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2249buildbot # [ 70.410544] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}2250buildbot # [ 70.415309] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake', b'test-effect']2251buildbot # [ 70.422579] twistd[1161]: 2026-08-30T07:51:46+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False2252buildbot # [ 70.805469] nix-daemon[1426]: accepted connection from pid 1670, user buildbot-worker2253buildbot # [ 70.859114] twistd[1161]: 2026-08-30T07:51:46+0000 [-] (command ['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.4619342254buildbot # [ 70.865504] twistd[1161]: 2026-08-30T07:51:46+0000 [-] (command 21): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f789a70>2255buildbot # [ 70.871403] twistd[1160]: 2026-08-30T07:51:46+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=12256buildbot # [ 70.905890] twistd[1160]: 2026-08-30T07:51:46+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []2257buildbot # [ 70.917526] twistd[1160]: 2026-08-30T07:51:46+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])2258buildbot # [ 70.920348] twistd[1160]: 2026-08-30T07:51:46+0000 [-] <Build gitea-admin/test-flake/run-effect number:1 results:failure>: build finished2259buildbot # [ 70.938117] twistd[1160]: 2026-08-30T07:51:46+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2260buildbot # [ 71.065331] twistd[1160]: 2026-08-30T07:51:47+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []2261buildbot # [ 71.079842] twistd[1160]: 2026-08-30T07:51:47+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])2262buildbot # [ 71.108248] twistd[1160]: 2026-08-30T07:51:47+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [22]2263buildbot # [ 71.113930] twistd[1160]: 2026-08-30T07:51:47+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'2264buildbot # [ 71.121356] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command 22): startCommand:shell2265buildbot # [ 71.123500] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2266buildbot # [ 71.128750] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list-schedules --rev 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 --branch master --repo gitea-admin/test-flake2267buildbot # [ 71.135640] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2268buildbot # [ 71.141795] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2269buildbot # [ 71.148112] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']2270buildbot # [ 71.155250] twistd[1161]: 2026-08-30T07:51:47+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False2271buildbot # [ 71.220851] gitea[890]: 2026/08/30 07:51:47 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/5aed03f4128bbe5f2d1015d8b17342f43cb23f24 for [::1]:43980, 201 Created in 127.8ms @ repo/status.go:21(repo.NewCommitStatus)2272buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2273buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2274buildbot # Dload Upload Total Spent Left Speed2275buildbot # 0 0 0 0 0 0 0 0 0100 1912 100 1912 0 0 33028 0 0100 1912 100 1912 0 0 26478 0 0100 1912 100 1912 0 0 21931 0 02276buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)2277buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2278buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2279buildbot # Dload Upload Total Spent Left Speed2280buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 17413 0 0100 937 100 937 0 0 13764 0 0100 937 100 937 0 0 11312 0 02281buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.16 seconds)2282buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2283buildbot # [ 71.664830] nix-daemon[1426]: accepted connection from pid 1692, user buildbot-worker2284buildbot # [ 71.708121] twistd[1161]: 2026-08-30T07:51:47+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5596512285buildbot # [ 71.713544] twistd[1161]: 2026-08-30T07:51:47+0000 [-] (command 22): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f78a150>2286buildbot # [ 71.721616] twistd[1160]: 2026-08-30T07:51:47+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=02287buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2288buildbot # Dload Upload Total Spent Left Speed2289buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 36229 0 0100 1810 100 1810 0 0 28271 0 0100 1810 100 1810 0 0 23392 [ 71.816768] twistd[1160]: 2026-08-30T07:51:47+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b73d0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b7480>, logEnviron=False)): []2290buildbot # 0 02291buildbot # [ 71.844337] twistd[1160]: 2026-08-30T07:51:47+0000 [-] step 'Evaluate scheduled effects' complete: success (None)2292buildbot # [ 71.847115] twistd[1160]: 2026-08-30T07:51:47+0000 [-] <Build gitea-admin/test-flake/nix-eval number:1 results:failure>: build finished2293buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.20 seconds)2294buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2295buildbot # [ 71.863749] twistd[1160]: 2026-08-30T07:51:47+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2296buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2297buildbot # Dload Upload Total Spent Left Speed2298buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 31520 0 0100 2411 100 2411 0 0 26323 0 0100 2411 100 2411 0 0 23610 0 02299buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.22 seconds)2300buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2301buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2302buildbot # Dload Upload Total Spent Left Speed2303buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 55375 0 0100 2096 100 2096 0 0 43661 0 0100 2096 100 2096 0 0 35803 0 02304buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.12 seconds)2305buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2306buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2307buildbot # Dload Upload Total Spent Left Speed2308buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 54187 0 0100 2003 100 2003 0 0 42421 0 0100 2003 100 2003 0 0 35127 0 02309buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2310buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2311buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2312buildbot # Dload Upload Total Spent Left Speed2313buildbot # 0 0 0 0 0 0 0 0 0100 1921 100 1921 0 0 47032 0 0100 1921 100 1921 0 0 37592 0 0100 1921 100 1921 0 0 31300 0 02314buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)2315buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2316buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2317buildbot # Dload Upload Total Spent Left Speed2318buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25520 0 0100 937 100 937 0 0 19989 0 0100 937 100 937 0 0 16517 0 02319buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)2320buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2321buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2322buildbot # Dload Upload Total Spent Left Speed2323buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 51060 0 0100 1810 100 1810 0 0 39743 0 0100 1810 100 1810 0 0 32701 0 02324buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.12 seconds)2325buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2326buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2327buildbot # Dload Upload Total Spent Left Speed2328buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 65632 0 0100 2411 100 2411 0 0 51775 0 0100 2411 100 2411 0 0 42707 0 02329buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2330buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2331buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2332buildbot # Dload Upload Total Spent Left Speed2333buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 58504 0 0100 2096 100 2096 0 0 45844 0 0100 2096 100 2096 0 0 37622 0 02334buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.12 seconds)2335buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2336buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2337buildbot # Dload Upload Total Spent Left Speed2338buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 54653 0 0100 2003 100 2003 0 0 42789 0 0100 2003 100 2003 0 0 35330 0 02339buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2340buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2341buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2342buildbot # Dload Upload Total Spent Left Speed2343buildbot # 0 0 0 0 0 0 0 0 0100 3642 100 3642 0 0 98557 0 0100 3642 100 3642 0 0 76838 0 0100 3642 100 3642 0 0 63310 0 02344buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.12 seconds)2345buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2346buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2347buildbot # Dload Upload Total Spent Left Speed2348buildbot # 0 0 0 0 0 0 0 0 0100 3642 100 3642 0 0 98.47k 0 0100 3642 100 3642 0 0 78300 0 0100 3642 100 3642 0 0 64146 0 02349buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.12 seconds)2350(finished: subtest: Webhook triggers nix-eval build, in 31.28 seconds)2351subtest: PR with effects_on_pull_requests runs effects2352buildbot: must succeed: 2353 cd /tmp/test-flake2354 git checkout -b test-pr-effects2355 echo '# PR change' >> flake.nix2356 git add flake.nix2357 git commit -m 'PR to test effects on pull requests'2358 git push origin test-pr-effects2359 2360buildbot # Switched to a new branch 'test-pr-effects'2361buildbot # [ 74.410161] gitea[890]: 2026/08/30 07:51:50 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:49242, 401 Unauthorized in 4.0ms @ repo/githttp.go:455(repo.GetInfoRefs)2362buildbot # [ 74.446233] gitea[890]: 2026/08/30 07:51:50 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:49242, 200 OK in 30.6ms @ repo/githttp.go:455(repo.GetInfoRefs)2363buildbot # Enumerating objects: 5, done.2364buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.2365buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.2366buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 341 bytes | 170.00 KiB/s, done.2367buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)2368buildbot # [ 74.726746] gitea[890]: 2026/08/30 07:51:50 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 5.1ms @ private/hook_pre_receive.go:110(private.HookPreReceive)2369buildbot # [ 75.064256] gitea[890]: 2026/08/30 07:51:51 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 31.9ms @ private/hook_post_receive.go:101(private.HookPostReceive)2370buildbot # remote:2371buildbot # remote: Create a new pull request for 'test-pr-effects':2372buildbot # [ 75.090218] gitea[890]: 2026/08/30 07:51:51 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:49242, 200 OK in 601.9ms @ repo/githttp.go:438(repo.ServiceReceivePack)2373buildbot # remote: http://localhost:3742/gitea-admin/test-flake/pulls/new/test-pr-effects2374buildbot # remote:2375buildbot # To http://localhost:3742/gitea-admin/test-flake.git2376buildbot # * [new branch] test-pr-effects -> test-pr-effects2377buildbot: (finished: must succeed: 2378 cd /tmp/test-flake2379 git checkout -b test-pr-effects2380 echo '# PR change' >> flake.nix2381 git add flake.nix2382 git commit -m 'PR to test effects on pull requests'2383 git push origin test-pr-effects2384 , in 0.81 seconds)2385buildbot: must succeed: 2386 TOKEN=$(cat /tmp/gitea-token)2387 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2388 2389buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2390buildbot # Dload Upload Total Spent Left Speed2391buildbot # 0 0 0 0 0 0 0 0 0[ 76.094471] gitea[890]: 2026/08/30 07:51:52 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/pulls for [::1]:49270, 201 Created in 890.9ms @ repo/pull.go:370(repo.CreatePullRequest)2392buildbot # 100 6455 0 6387 100 68 6882 73 0100 6455 0 6387 100 68 6805 72 0100 6455 0 6387 100 68 6734 71 02393buildbot: (finished: must succeed: 2394 TOKEN=$(cat /tmp/gitea-token)2395 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2396 , in 1.03 seconds)2397buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2398buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2399buildbot # Dload Upload Total Spent Left Speed2400buildbot # 0 0 0 0 0 0 0 0 0100 1921 100 1921 0 0 52725 0 0100 1921 100 1921 0 0 41444 0 0100 1921 100 1921 0 0 34149 0 02401buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)2402buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2403buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2404buildbot # Dload Upload Total Spent Left Speed2405buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 18377 0 0100 937 100 937 0 0 14490 0 0100 937 100 937 0 0 11640 0 02406buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.16 seconds)2407buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2408buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2409buildbot # Dload Upload Total Spent Left Speed2410buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 45150 0 0100 1810 100 1810 0 0 36265 0 0100 1810 100 1810 0 0 30309 0 02411buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.13 seconds)2412buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2413buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2414buildbot # Dload Upload Total Spent Left Speed2415buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 65678 0 0100 2411 100 2411 0 0 51647 0 0100 2411 100 2411 0 0 42636 0 02416buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2417buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2418buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2419buildbot # Dload Upload Total Spent Left Speed2420buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 59466 0 0100 2096 100 2096 0 0 46209 0 0100 2096 100 2096 0 0 37953 0 02421buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.12 seconds)2422buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2423buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2424buildbot # Dload Upload Total Spent Left Speed2425buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 54083 0 0100 2003 100 2003 0 0 42437 0 0100 2003 100 2003 0 0 35051 0 02426buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2427buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2428buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2429buildbot # Dload Upload Total Spent Left Speed2430buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 54136 0 0100 2003 100 2003 0 0 42419 0 0100 2003 100 2003 0 0 35094 0 02431buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2432buildbot # [ 77.109826] twistd[1160]: 2026-08-30T07:51:53+0000 [_GenericHTTPChannelProtocol,81,127.0.0.1] Received event 'pull_request' from gitea2433buildbot # [ 77.131084] twistd[1160]: 2026-08-30T07:51:53+0000 [-] added change with revision 8e6065c83b433d9310de308b6855cb407ba71c16 to database2434buildbot # [ 77.135259] twistd[1160]: 2026-08-30T07:51:53+0000 [-] injected change 22435buildbot # [ 77.159523] twistd[1160]: 2026-08-30T07:51:53+0000 [-] added buildset 6 to database2436buildbot # [ 77.169101] twistd[1160]: 2026-08-30T07:51:53+0000 [_GenericHTTPChannelProtocol,82,127.0.0.1] Received event 'push' from gitea2437buildbot # [ 77.180577] twistd[1160]: 2026-08-30T07:51:53+0000 [-] added change with revision 8e6065c83b433d9310de308b6855cb407ba71c16 to database2438buildbot # [ 77.183838] twistd[1160]: 2026-08-30T07:51:53+0000 [-] injected change 32439buildbot # [ 77.284562] twistd[1160]: 2026-08-30T07:51:53+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>2440buildbot # [ 77.289471] twistd[1160]: 2026-08-30T07:51:53+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild2441buildbot # [ 77.371758] twistd[1160]: 2026-08-30T07:51:53+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2442buildbot # [ 77.377417] twistd[1160]: 2026-08-30T07:51:53+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>2443buildbot # [ 77.382263] twistd[1160]: 2026-08-30T07:51:53+0000 [-] sending ping2444buildbot # [ 77.385212] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] message from master: ping2445buildbot # [ 77.387858] twistd[1160]: 2026-08-30T07:51:53+0000 [Broker,0,127.0.0.1] ping finished: success2446buildbot # [ 77.409993] twistd[1160]: 2026-08-30T07:51:53+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [23]2447buildbot # [ 77.412550] twistd[1160]: 2026-08-30T07:51:53+0000 [-] command '['git', '--version']' in dir 'build'2448buildbot # [ 77.415406] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 23): startCommand:shell2449buildbot # [ 77.418826] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2450buildbot # [ 77.423866] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', '--version']): git --version2451buildbot # [ 77.426251] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2452buildbot # [ 77.430117] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2453buildbot # [ 77.433435] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2454buildbot # [ 77.436094] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', '--version']): using PTY: False2455buildbot # [ 77.457709] twistd[1161]: 2026-08-30T07:51:53+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0349672456buildbot # [ 77.461137] twistd[1161]: 2026-08-30T07:51:53+0000 [-] (command 23): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f766a30>2457buildbot # [ 77.488099] twistd[1160]: 2026-08-30T07:51:53+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02458buildbot # [ 77.513638] twistd[1160]: 2026-08-30T07:51:53+0000 [-] <RemoteCommand 'stat' at 132516788690832>: RemoteCommand.run [24]2459buildbot # [ 77.532775] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 24): startCommand:stat2460buildbot # [ 77.535564] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 24): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x742d1f71ae90>2461buildbot # [ 77.540165] twistd[1160]: 2026-08-30T07:51:53+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132516788690832> rc=02462buildbot # [ 77.548721] twistd[1160]: 2026-08-30T07:51:53+0000 [-] <RemoteCommand 'stat' at 132516788691152>: RemoteCommand.run [25]2463buildbot # [ 77.585116] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 25): startCommand:stat2464buildbot # [ 77.587284] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 25): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'2465buildbot # [ 77.593786] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 25): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x742d1fd0afd0>2466buildbot # [ 77.598082] twistd[1160]: 2026-08-30T07:51:53+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132516788691152> rc=22467buildbot # [ 77.613260] twistd[1160]: 2026-08-30T07:51:53+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']'>: RemoteCommand.run [26]2468buildbot # [ 77.620533] twistd[1160]: 2026-08-30T07:51:53+0000 [-] command '['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']' in dir 'build'2469buildbot # [ 77.642978] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 26): startCommand:shell2470buildbot # [ 77.645598] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): RunProcess._startCommand2471buildbot # [ 77.653092] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): git fetch -f -t http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 8e6065c83b433d9310de308b6855cb407ba71c16 +refs/heads/master:refs/remotes/origin/master2472buildbot # [ 77.663314] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2473buildbot # [ 77.671988] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): watching logfiles {}2474buildbot # [ 77.678564] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): argv: [b'git', b'fetch', b'-f', b'-t', b'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24', b'8e6065c83b433d9310de308b6855cb407ba71c16', b'+refs/heads/master:refs/remotes/origin/master']2475buildbot # [ 77.690853] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): using PTY: False2476buildbot # [ 77.776101] gitea[890]: 2026/08/30 07:51:53 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:49274, 200 OK in 13.7ms @ repo/githttp.go:455(repo.GetInfoRefs)2477buildbot # [ 77.788847] gitea[890]: 2026/08/30 07:51:53 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:49274, 200 OK in 16.2ms @ repo/githttp.go:433(repo.ServiceUploadPack)2478buildbot # [ 77.818351] gitea[890]: 2026/08/30 07:51:53 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:49274, 200 OK in 23.0ms @ repo/githttp.go:433(repo.ServiceUploadPack)2479buildbot # [ 77.854141] twistd[1161]: 2026-08-30T07:51:53+0000 [-] (command ['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']): command finished with signal None, exit code 0, elapsedTime: 0.2004072480buildbot # [ 77.861301] twistd[1161]: 2026-08-30T07:51:53+0000 [-] (command 26): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f766350>2481buildbot # [ 77.869102] twistd[1160]: 2026-08-30T07:51:53+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24', '8e6065c83b433d9310de308b6855cb407ba71c16', '+refs/heads/master:refs/remotes/origin/master']'> rc=02482buildbot # [ 77.898611] twistd[1160]: 2026-08-30T07:51:53+0000 [-] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']'>: RemoteCommand.run [27]2483buildbot # [ 77.902253] twistd[1160]: 2026-08-30T07:51:53+0000 [-] command '['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']' in dir 'build'2484buildbot # [ 77.906319] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command 27): startCommand:shell2485buildbot # [ 77.912062] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): RunProcess._startCommand2486buildbot # [ 77.915604] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): git checkout --detach -f 8e6065c83b433d9310de308b6855cb407ba71c162487buildbot # [ 77.919896] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2488buildbot # [ 77.924719] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): watching logfiles {}2489buildbot # [ 77.928271] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): argv: [b'git', b'checkout', b'--detach', b'-f', b'8e6065c83b433d9310de308b6855cb407ba71c16']2490buildbot # [ 77.933041] twistd[1161]: 2026-08-30T07:51:53+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): using PTY: False2491buildbot # [ 77.960194] twistd[1161]: 2026-08-30T07:51:53+0000 [-] (command ['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): command finished with signal None, exit code 0, elapsedTime: 0.0481222492buildbot # [ 77.964378] twistd[1161]: 2026-08-30T07:51:53+0000 [-] (command 27): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f6fe7b0>2493buildbot # [ 77.982087] twistd[1160]: 2026-08-30T07:51:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']'> rc=02494buildbot # [ 78.008099] twistd[1160]: 2026-08-30T07:51:54+0000 [-] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']'>: RemoteCommand.run [28]2495buildbot # [ 78.014405] twistd[1160]: 2026-08-30T07:51:54+0000 [-] command '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']' in dir 'build'2496buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2497buildbot # [ 78.028570] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command 28): startCommand:shell2498buildbot # [ 78.032911] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): RunProcess._startCommand2499buildbot # [ 78.039223] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): git -c user.email=buildbot@example.com -c user.name=buildbot merge --no-ff -m 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16' 5aed03f4128bbe5f2d1015d8b17342f43cb23f242500buildbot # [ 78.048751] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2501buildbot # [ 78.056328] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): watching logfiles {}2502buildbot # [ 78.063426] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): argv: [b'git', b'-c', b'user.email=buildbot@example.com', b'-c', b'user.name=buildbot', b'merge', b'--no-ff', b'-m', b'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', b'5aed03f4128bbe5f2d1015d8b17342f43cb23f24']2503buildbot # [ 78.075633] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): using PTY: False2504buildbot # [ 78.109421] twistd[1161]: 2026-08-30T07:51:54+0000 [-] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']): command finished with signal None, exit code 0, elapsedTime: 0.0768012505buildbot # [ 78.118206] twistd[1161]: 2026-08-30T07:51:54+0000 [-] (command 28): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ac050>2506buildbot # [ 78.135927] twistd[1160]: 2026-08-30T07:51:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 5aed03f4128bbe5f2d1015d8b17342f43cb23f24 into 8e6065c83b433d9310de308b6855cb407ba71c16', '5aed03f4128bbe5f2d1015d8b17342f43cb23f24']'> rc=02507buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2508buildbot # Dload Upload Total Spent Left Speed2509buildbot # 0 0 0 [ 78.198689] twistd[1160]: 2026-08-30T07:51:54+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []2510buildbot # 0 0 0 0 0 0100 2270 100 2270 0 0 36563 0 [ 78.234330] twistd[1160]: 2026-08-30T07:51:54+0000 [-] step 'git' complete: success (None)2511buildbot # 0100 2270 100 2270 0 0 28514 0 0100 2270 100 [ 78.257744] twistd[1160]: 2026-08-30T07:51:54+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7885f8498690>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7885f849d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7885f849d010>)])2512buildbot # 2270 0 0 24475 0 02513buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.27 seconds)2514buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2515buildbot # [ 78.296767] twistd[1160]: 2026-08-30T07:51:54+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [29]2516buildbot # [ 78.303787] twistd[1160]: 2026-08-30T07:51:54+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'2517buildbot # [ 78.310731] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command 29): startCommand:shell2518buildbot # [ 78.314207] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand2519buildbot # [ 78.317645] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'2520buildbot # [ 78.321836] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2521buildbot # [ 78.328438] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}2522buildbot # [ 78.333236] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']2523buildbot # [ 78.339383] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False2524buildbot # [ 78.396248] twistd[1161]: 2026-08-30T07:51:54+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0571702525buildbot # [ 78.401266] twistd[1161]: 2026-08-30T07:51:54+0000 [-] (command 29): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f77b750>2526buildbot # [ 78.410060] twistd[1160]: 2026-08-30T07:51:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=02527buildbot # [ 78.421231] twistd[1160]: 2026-08-30T07:51:54+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [30]2528buildbot # [ 78.428920] twistd[1160]: 2026-08-30T07:51:54+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'2529buildbot # [ 78.439492] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command 30): startCommand:shell2530buildbot # [ 78.443465] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand2531buildbot # [ 78.452179] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'2532buildbot # [ 78.464434] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2533buildbot # [ 78.474148] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}2534buildbot # [ 78.483748] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']2535buildbot # [ 78.496863] twistd[1161]: 2026-08-30T07:51:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False2536buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2537buildbot # Dload Upload Total Spent Left Speed2538buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 10165 0 0100 937 100 937 0 0 8307 0 [ 78.610577] gitea[890]: 2026/08/30 07:51:54 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/8e6065c83b433d9310de308b6855cb407ba71c16 for [::1]:43980, 201 Created in 230.0ms @ repo/status.go:21(repo.NewCommitStatus)2539buildbot # 0100 937 100 937 0 0 6853 0 02540buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.35 seconds)2541buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2542buildbot # [ 78.695437] nix-daemon[1426]: accepted connection from pid 1943, user buildbot-worker2543buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2544buildbot # Dload Upload Total Spent Left Speed2545buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 46039 0 0100 1810 100 1810 0 0 36530 0 0100 1810 100 1810 0 0 30503 0 02546buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.13 seconds)2547buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2548buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2549buildbot # Dload Upload Total Spent Left Speed2550buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 66174 0 0100 2411 100 2411 0 0 51657 0 0100 2411 100 2411 0 0 42434 0 02551buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2552buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2553buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2554buildbot # Dload Upload Total Spent Left Speed2555buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 59180 0 0100 2096 100 2096 0 0 46257 0 0100 2096 100 2096 0 0 38007 0 02556buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.12 seconds)2557buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2558buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2559buildbot # Dload Upload Total Spent Left Speed2560buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 55354 0 0100 2003 100 2003 0 0 43182 0 0100 2003 100 2003 0 0 35681 0 02561buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2562buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2563buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2564buildbot # Dload Upload Total Spent Left Speed2565buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 56155 0 0100 2003 100 2003 0 0 43646 0 0100 2003 100 2003 0 0 35922 0 02566buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2567buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2568buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2569buildbot # Dload Upload Total Spent Left Speed2570buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 79099 0 0100 2935 100 2935 0 0 61827 0 0100 2935 100 2935 0 0 51151 0 02571buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)2572buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2573buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2574buildbot # Dload Upload Total Spent Left Speed2575buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 79453 0 0100 2935 100 2935 0 0 62416 0 0100 2935 100 2935 0 0 51496 0 02576buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)2577buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2578buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2579buildbot # Dload Upload Total Spent Left Speed2580buildbot # 0 0 0 0 0 0 0 0 0100 2270 100 2270 0 0 59019 0 0100 2270 100 2270 0 0 46635 0 0100 2270 100 2270 0 0 38775 0 02581buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)2582buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2583buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2584buildbot # Dload Upload Total Spent Left Speed2585buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25900 0 0100 937 100 937 0 0 20283 0 0100 937 100 937 0 0 16730 0 02586buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)2587buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2588buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2589buildbot # Dload Upload Total Spent Left Speed2590buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 50391 0 0100 1810 100 1810 0 0 39317 0 0100 1810 100 1810 0 0 31876 0 02591buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.12 seconds)2592buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2593buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2594buildbot # Dload Upload Total Spent Left Speed2595buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 68063 0 0100 2411 100 2411 0 0 52076 0 0100 2411 100 2411 0 0 42992 0 02596buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2597buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2598buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2599buildbot # Dload Upload Total Spent Left Speed2600buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 55561 0 0100 2096 100 2096 0 0 43753 0 0100 2096 100 2096 0 0 35787 0 02601buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.12 seconds)2602buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2603buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2604buildbot # Dload Upload Total Spent Left Speed2605buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 56801 0 0100 2003 100 2003 0 0 43927 0 0100 2003 100 2003 0 0 36027 0 02606buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2607buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2608buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2609buildbot # Dload Upload Total Spent Left Speed2610buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 53477 0 0100 2003 100 2003 0 0 42155 0 0100 2003 100 2003 0 0 34898 0 02611buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2612buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2613buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2614buildbot # Dload Upload Total Spent Left Speed2615buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 82655 0 0100 2935 100 2935 0 0 64046 0 0100 2935 100 2935 0 0 52707 0 02616buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)2617buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2618buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2619buildbot # Dload Upload Total Spent Left Speed2620buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 79761 0 0100 2935 100 2935 0 0 62557 0 0100 2935 100 2935 0 0 51791 0 02621buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)2622buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2623buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2624buildbot # Dload Upload Total Spent Left Speed2625buildbot # 0 0 0 0 0 0 0 0 0100 2270 100 2270 0 0 58600 0 0100 2270 100 2270 0 0 46755 0 0100 2270 100 2270 0 0 38904 0 02626buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)2627buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2628buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2629buildbot # Dload Upload Total Spent Left Speed2630buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25572 0 0100 937 100 937 0 0 20063 0 0100 937 100 937 0 0 16550 0 02631buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)2632buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2633buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2634buildbot # Dload Upload Total Spent Left Speed2635buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 51000 0 0100 1810 100 1810 0 0 39638 0 0100 1810 100 1810 0 0 32610 0 02636buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.12 seconds)2637buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2638buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2639buildbot # Dload Upload Total Spent Left Speed2640buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 44429 0 0100 2411 100 2411 0 0 34574 0 0100 2411 100 2411 0 0 28442 0 02641buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.16 seconds)2642buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2643buildbot # [ 83.145943] nix-daemon[1426]: accepted connection from pid 2014, user buildbot-worker2644buildbot # [ 83.163168] nix-daemon[1426]: accepted connection from pid 1943, user buildbot-worker2645buildbot # [ 83.197067] twistd[1161]: 2026-08-30T07:51:59+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 4.7135562646buildbot # [ 83.207103] twistd[1161]: 2026-08-30T07:51:59+0000 [-] (command 30): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ac950>2647buildbot # [ 83.213876] twistd[1160]: 2026-08-30T07:51:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=02648buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2649buildbot # Dload Upload Total Spent Left Speed2650buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 43212 0 0100 2096 100 2096 0 0 33209 0 0100 2096 100 2096 0 0 26820 0 02651buildbot # [ 83.324594] twistd[1160]: 2026-08-30T07:51:59+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7885f8498690>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7885f849d010>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7885f849d010>)]2652buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.21 seconds)2653buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2654buildbot # [ 83.357120] twistd[1160]: 2026-08-30T07:51:59+0000 [-] step 'Evaluate flake' complete: success (None)2655buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2656buildbot # Dload Upload Total Spent Left Speed2657buildbot # [ 83.462851] twistd[1160]: 2026-08-30T07:51:59+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []2658buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 22902 0 [ 83.519702] twistd[1160]: 2026-08-30T07:51:59+0000 [-] step 'build flake' complete: success (None)2659buildbot # 0100 2003 100 2003 0 0 18104 0 0100 2003 100 2003 0 0 15354 [ 83.557852] twistd[1160]: 2026-08-30T07:51:59+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b6b90>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b6c40>)): []2660buildbot # [ 83.565881] gitea[890]: 2026/08/30 07:51:59 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/8e6065c83b433d9310de308b6855cb407ba71c16 for [::1]:43980, 201 Created in 186.2ms @ repo/status.go:21(repo.NewCommitStatus)2661buildbot # 0 02662buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.25 seconds)2663buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2664buildbot # [ 83.590145] twistd[1160]: 2026-08-30T07:51:59+0000 [-] step 'Process skipped builds' complete: skipped (None)2665buildbot # [ 83.625431] twistd[1160]: 2026-08-30T07:51:59+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [31]2666buildbot # [ 83.631094] twistd[1160]: 2026-08-30T07:51:59+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'2667buildbot # [ 83.636062] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command 31): startCommand:shell2668buildbot # [ 83.641108] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand2669buildbot # [ 83.646354] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/2670buildbot # [ 83.651630] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2671buildbot # [ 83.657686] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}2672buildbot # [ 83.662754] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']2673buildbot # [ 83.669966] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False2674buildbot # [ 83.697432] twistd[1161]: 2026-08-30T07:51:59+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0279992675buildbot # [ 83.704623] twistd[1161]: 2026-08-30T07:51:59+0000 [-] (command 31): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ac6d0>2676buildbot # % Total % Received % Xferd Average Speed Time Time Time [ 83.729555] twistd[1160]: 2026-08-30T07:51:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=02677buildbot # Current2678buildbot # Dload Upload Total Spent Left Speed2679buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 27420 0 [ 83.799585] gitea[890]: 2026/08/30 07:51:59 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/8e6065c83b433d9310de308b6855cb407ba71c16 for [::1]:43980, 201 Created in 178.3ms @ repo/status.go:21(repo.NewCommitStatus)2680buildbot # 0100 2003 100 2003 0 0 20302 0 [ 83.821186] twistd[1160]: 2026-08-30T07:51:59+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []2681buildbot # 0100 2003 100 2003 0 0 16458 0 02682buildbot # [ 83.853633] twistd[1160]: 2026-08-30T07:51:59+0000 [-] step 'Cleanup drv paths' complete: success (None)2683buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.27 seconds)2684buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2685buildbot # [ 83.885100] twistd[1160]: 2026-08-30T07:51:59+0000 [-] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'>: RemoteCommand.run [32]2686buildbot # [ 83.888166] twistd[1160]: 2026-08-30T07:51:59+0000 [-] command '['git', 'show', 'origin/master:buildbot-nix.toml']' in dir 'build'2687buildbot # [ 83.893343] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command 32): startCommand:shell2688buildbot # [ 83.897391] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): RunProcess._startCommand2689buildbot # [ 83.900655] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): git show origin/master:buildbot-nix.toml2690buildbot # [ 83.904677] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2691buildbot # [ 83.912134] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): watching logfiles {}2692buildbot # [ 83.915244] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): argv: [b'git', b'show', b'origin/master:buildbot-nix.toml']2693buildbot # [ 83.918921] twistd[1161]: 2026-08-30T07:51:59+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): using PTY: False2694buildbot # [ 83.949645] twistd[1161]: 2026-08-30T07:51:59+0000 [-] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): command finished with signal None, exit code 0, elapsedTime: 0.0381452695buildbot # [ 83.954349] twistd[1161]: 2026-08-30T07:51:59+0000 [-] (command 32): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7accd0>2696buildbot # % Total %[ 83.975582] twistd[1160]: 2026-08-30T07:52:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'> rc=02697buildbot # Received % Xferd Average Speed Time Time Time Cu[ 83.996158] twistd[1160]: 2026-08-30T07:52:00+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [33]2698buildbot # [ 84.000817] twistd[1160]: 2026-08-30T07:52:00+0000 [-] command '['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']' in dir 'build'2699buildbot # rrent2700buildbot # [ 84.007530] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command 33): startCommand:shell2701buildbot # [ 84.014524] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2702buildbot # [ 84.019350] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev 8e6065c83b433d9310de308b6855cb407ba71c16 --branch test-pr-effects --repo gitea-admin/test-flake2703buildbot # [ 84.025836] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2704buildbot # [ 84.032935] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2705buildbot # [ 84.039508] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'8e6065c83b433d9310de308b6855cb407ba71c16', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake']2706buildbot # [ 84.046640] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): using PTY: False2707buildbot # Dload Upload Total Spent Left Speed2708buildbot # 0 0 0 0 0 0 0 0 0100 3343 100 3343 0 0 25901 0 0100 3343 100 3343 0 0 [ 84.131128] gitea[890]: 2026/08/30 07:52:00 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/8e6065c83b433d9310de308b6855cb407ba71c16 for [::1]:43980, 201 Created in 247.4ms @ repo/status.go:21(repo.NewCommitStatus)2709buildbot # 21990 0 0100 3343 100 3343 0 0 19278 0 02710buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.30 seconds)2711buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties2712buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2713buildbot # Dload Upload Total Spent Left Speed2714buildbot # 0 0 0 0 0 0 0 0 0100 3343 100 3343 0 0 61898 0 0100 3343 100 3343 0 0 48036 0 0100 3343 100 3343 0 0 39180 0 02715buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.16 seconds)2716buildbot # [ 84.526619] nix-daemon[1426]: accepted connection from pid 2052, user buildbot-worker2717buildbot # [ 84.560404] twistd[1161]: 2026-08-30T07:52:00+0000 [-] (command ['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5261552718buildbot # [ 84.566708] twistd[1161]: 2026-08-30T07:52:00+0000 [-] (command 33): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ad3d0>2719buildbot # [ 84.573487] twistd[1160]: 2026-08-30T07:52:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'> rc=02720buildbot # [ 84.618483] twistd[1160]: 2026-08-30T07:52:00+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b7110>, logEnviron=False)): []2721buildbot # [ 84.633911] twistd[1160]: 2026-08-30T07:52:00+0000 [-] step 'Evaluate effects' complete: success (None)2722buildbot # [ 84.669969] twistd[1160]: 2026-08-30T07:52:00+0000 [-] added buildset 7 to database2723buildbot # [ 84.764654] gitea[890]: 2026/08/30 07:52:00 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/8e6065c83b433d9310de308b6855cb407ba71c16 for [::1]:43980, 201 Created in 94.2ms @ repo/status.go:21(repo.NewCommitStatus)2724buildbot # [ 84.812244] twistd[1160]: 2026-08-30T07:52:00+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>2725buildbot # [ 84.819089] twistd[1160]: 2026-08-30T07:52:00+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild2726buildbot # [ 84.886946] twistd[1160]: 2026-08-30T07:52:00+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2727buildbot # [ 84.892214] twistd[1160]: 2026-08-30T07:52:00+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>2728buildbot # [ 84.897621] twistd[1160]: 2026-08-30T07:52:00+0000 [-] sending ping2729buildbot # [ 84.899781] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] message from master: ping2730buildbot # [ 84.902731] twistd[1160]: 2026-08-30T07:52:00+0000 [Broker,0,127.0.0.1] ping finished: success2731buildbot # [ 84.924113] twistd[1160]: 2026-08-30T07:52:00+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [34]2732buildbot # [ 84.926641] twistd[1160]: 2026-08-30T07:52:00+0000 [-] command '['git', '--version']' in dir 'build'2733buildbot # [ 84.929595] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command 34): startCommand:shell2734buildbot # [ 84.934091] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2735buildbot # [ 84.936591] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): git --version2736buildbot # [ 84.938940] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2737buildbot # [ 84.942790] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2738buildbot # [ 84.945266] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2739buildbot # [ 84.947889] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): environment:2740buildbot # [ 84.950235] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2741buildbot # [ 84.953575] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2742buildbot # [ 84.955734] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2743buildbot # [ 84.957331] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2744buildbot # [ 84.959193] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2745buildbot # [ 84.961733] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2746buildbot # [ 84.963609] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2747buildbot # [ 84.965101] twistd[1161]: 'LANG': 'en_US.UTF-8',2748buildbot # [ 84.966428] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2749buildbot # [ 84.970276] twistd[1161]: 'LOGNAME': 'buildbot-worker',2750buildbot # [ 84.971690] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2751buildbot # [ 84.973427] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2752buildbot # [ 84.977133] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2753buildbot # [ 84.979089] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2754buildbot # [ 85.014877] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2755buildbot # [ 85.018319] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2756buildbot # [ 85.019720] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2757buildbot # [ 85.022525] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2758buildbot # [ 85.025308] twistd[1161]: 'SHLVL': '0',2759buildbot # [ 85.026457] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2760buildbot # [ 85.027907] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2761buildbot # [ 85.031398] twistd[1161]: 'USER': 'buildbot-worker',2762buildbot # [ 85.032786] twistd[1161]: 'WORKER_COUNT': '0',2763buildbot # [ 85.034133] twistd[1161]: 'WORKER_NAME': 'local-worker',2764buildbot # [ 85.035801] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2765buildbot # [ 85.038256] twistd[1161]: 2026-08-30T07:52:00+0000 [Broker,client] (command ['git', '--version']): using PTY: False2766buildbot # [ 85.053114] twistd[1161]: 2026-08-30T07:52:01+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.1182672767buildbot # [ 85.056396] twistd[1161]: 2026-08-30T07:52:01+0000 [-] (command 34): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ad750>2768buildbot # [ 85.068063] twistd[1160]: 2026-08-30T07:52:01+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02769buildbot # [ 85.093050] twistd[1160]: 2026-08-30T07:52:01+0000 [-] <RemoteCommand 'stat' at 132516788696272>: RemoteCommand.run [35]2770buildbot # [ 85.096846] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 35): startCommand:stat2771buildbot # [ 85.100497] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 35): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'2772buildbot # [ 85.106459] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 35): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x742d1fd0ad70>2773buildbot # [ 85.110228] twistd[1160]: 2026-08-30T07:52:01+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132516788696272> rc=22774buildbot # [ 85.124571] twistd[1160]: 2026-08-30T07:52:01+0000 [-] <RemoteCommand 'listdir' at 132516788695952>: RemoteCommand.run [36]2775buildbot # [ 85.155103] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 36): startCommand:listdir2776buildbot # [ 85.157266] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 36): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x742d1f7187d0>2777buildbot # [ 85.162207] twistd[1160]: 2026-08-30T07:52:01+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 132516788695952> rc=02778buildbot # [ 85.171076] twistd[1160]: 2026-08-30T07:52:01+0000 [-] <RemoteShellCommand '['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']'>: RemoteCommand.run [37]2779buildbot # [ 85.174895] twistd[1160]: 2026-08-30T07:52:01+0000 [-] command '['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']' in dir 'build'2780buildbot # [ 85.206980] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 37): startCommand:shell2781buildbot # [ 85.210167] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): RunProcess._startCommand2782buildbot # [ 85.213513] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): git cat-file -e 8e6065c83b433d9310de308b6855cb407ba71c162783buildbot # [ 85.217449] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2784buildbot # [ 85.224169] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): watching logfiles {}2785buildbot # [ 85.227524] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): argv: [b'git', b'cat-file', b'-e', b'8e6065c83b433d9310de308b6855cb407ba71c16']2786buildbot # [ 85.231818] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): environment:2787buildbot # [ 85.234950] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2788buildbot # [ 85.236755] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2789buildbot # [ 85.238900] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2790buildbot # [ 85.240462] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2791buildbot # [ 85.242332] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2792buildbot # [ 85.246127] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2793buildbot # [ 85.247968] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2794buildbot # [ 85.249389] twistd[1161]: 'LANG': 'en_US.UTF-8',2795buildbot # [ 85.250697] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2796buildbot # [ 85.253590] twistd[1161]: 'LOGNAME': 'buildbot-worker',2797buildbot # [ 85.255087] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2798buildbot # [ 85.258125] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2799buildbot # [ 85.260712] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2800buildbot # [ 85.262662] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2801buildbot # [ 85.298573] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2802buildbot # [ 85.301195] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2803buildbot # [ 85.302569] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2804buildbot # [ 85.306580] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2805buildbot # [ 85.308356] twistd[1161]: 'SHLVL': '0',2806buildbot # [ 85.309931] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2807buildbot # [ 85.311355] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2808buildbot # [ 85.313694] twistd[1161]: 'USER': 'buildbot-worker',2809buildbot # [ 85.316158] twistd[1161]: 'WORKER_COUNT': '0',2810buildbot # [ 85.317467] twistd[1161]: 'WORKER_NAME': 'local-worker',2811buildbot # [ 85.318919] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2812buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2813buildbot # [ 85.321859] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): using PTY: False2814buildbot # [ 85.340402] twistd[1161]: 2026-08-30T07:52:01+0000 [-] (command ['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']): command finished with signal None, exit code 1, elapsedTime: 0.1162482815buildbot # [ 85.344389] twistd[1161]: 2026-08-30T07:52:01+0000 [-] (command 37): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7add50>2816buildbot # [ 85.353159] twistd[1160]: 2026-08-30T07:52:01+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'cat-file', '-e', '8e6065c83b433d9310de308b6855cb407ba71c16']'> rc=12817buildbot # [ 85.377597] twistd[1160]: 2026-08-30T07:52:01+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'>: RemoteCommand.run [38]2818buildbot # [ 85.382589] twistd[1160]: 2026-08-30T07:52:01+0000 [-] command '['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']' in dir 'build'2819buildbot # [ 85.389122] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 38): startCommand:shell2820buildbot # [ 85.392428] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): RunProcess._startCommand2821buildbot # [ 85.397947] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): git fetch -f --progress http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake test-pr-effects2822buildbot # [ 85.404501] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2823buildbot # [ 85.412881] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): watching logfiles {}2824buildbot # [ 85.417547] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): argv: [b'git', b'fetch', b'-f', b'--progress', b'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', b'test-pr-effects']2825buildbot # [ 85.424640] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): environment:2826buildbot # [ 85.429603] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2827buildbot # [ 85.431529] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2828buildbot # [ 85.434076] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2829buildbot # [ 85.435946] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2830buildbot # [ 85.438201] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2831buildbot # [ 85.440743] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2832buildbot # [ 85.443424] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2833buildbot # [ 85.445123] twistd[1161]: 'LANG': 'en_US.UTF-8',2834buildbot # [ 85.446958] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2835buildbot # [ 85.450410] twistd[1161]: 'LOGNAME': 'buildbot-worker',2836buildbot # [ 85.452420] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2837buildbot # [ 85.454803] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2838buildbot # [ 85.458265] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2839buildbot # [ 85.460374] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2840buildbot # [ 85.497845] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2841buildbot # [ 85.500494] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2842buildbot # [ 85.502124] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2843buildbot # [ 85.506278] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2844buildbot # [ 85.509122] twistd[1161]: 'SHLVL': '0',2845buildbot # [ 85.510263] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2846buildbot # [ 85.511643] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2847buildbot # [ 85.515073] twistd[1161]: 'USER': 'buildbot-worker',2848buildbot # [ 85.516463] twistd[1161]: 'WORKER_COUNT': '0',2849buildbot # [ 85.517726] twistd[1161]: 'WORKER_NAME': 'local-worker',2850buildbot # [ 85.519242] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2851buildbot # [ 85.523145] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): using PTY: False2852buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2853buildbot # Dload Upload Total Spent Left Speed2854buildbot # 0 0 0 0 0 0 0 0 0100 2620 100 2620 0 0 50754 0 0100 2620 100 2620 0 0 39756 0 0100 2620 100 2620 0 0 31591 0 02855buildbot # [ 85.638301] gitea[890]: 2026/08/30 07:52:01 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:48980, 200 OK in 26.7ms @ repo/githttp.go:455(repo.GetInfoRefs)2856buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.32 seconds)2857buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2858buildbot # [ 85.662645] gitea[890]: 2026/08/30 07:52:01 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:48980, 200 OK in 18.4ms @ repo/githttp.go:433(repo.ServiceUploadPack)2859buildbot # [ 85.695502] gitea[890]: 2026/08/30 07:52:01 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:48980, 200 OK in 24.6ms @ repo/githttp.go:433(repo.ServiceUploadPack)2860buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2861buildbot # Dload Upload Total Spent Left Speed2862buildbot # 0 [ 85.748928] twistd[1161]: 2026-08-30T07:52:01+0000 [-] (command ['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.3353202863buildbot # [ 85.755657] twistd[1161]: 2026-08-30T07:52:01+0000 [-] (command 38): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ae050>2864buildbot # 0 0 [ 85.763216] twistd[1160]: 2026-08-30T07:52:01+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:32d469c80edb6cd8f8ce9fbe6e5176ee12762642@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'> rc=02865buildbot # 0 0 0 0 0 0100 937 100 937 0 0 13597 0 0100 937 100 937 0 0 11232 0 0100 937 100 937 0 0 9611 0 02866buildbot # [ 85.828938] twistd[1160]: 2026-08-30T07:52:01+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']'>: RemoteCommand.run [39]2867buildbot # [ 85.832581] twistd[1160]: 2026-08-30T07:52:01+0000 [-] command '['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']' in dir 'build'2868buildbot # [ 85.840152] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command 39): startCommand:shell2869buildbot # [ 85.842341] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): RunProcess._startCommand2870buildbot # [ 85.845693] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): git checkout -f 8e6065c83b433d9310de308b6855cb407ba71c162871buildbot # [ 85.850140] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2872buildbot # [ 85.855519] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): watching logfiles {}2873buildbot # [ 85.861071] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): argv: [b'git', b'checkout', b'-f', b'8e6065c83b433d9310de308b6855cb407ba71c16']2874buildbot # [ 85.865487] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): environment:2875buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.22 seconds)2876buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2877buildbot # [ 85.869231] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2878buildbot # [ 85.871098] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2879buildbot # [ 85.873225] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2880buildbot # [ 85.875703] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2881buildbot # [ 85.877589] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2882buildbot # [ 85.880143] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2883buildbot # [ 85.881972] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2884buildbot # [ 85.884130] twistd[1161]: 'LANG': 'en_US.UTF-8',2885buildbot # [ 85.886101] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2886buildbot # [ 85.889528] twistd[1161]: 'LOGNAME': 'buildbot-worker',2887buildbot # [ 85.892162] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2888buildbot # [ 85.893917] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2889buildbot # [ 85.896554] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2890buildbot # [ 85.901091] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2891buildbot # [ 85.937752] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2892buildbot # [ 85.940379] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2893buildbot # [ 85.941765] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2894buildbot # [ 85.946473] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2895buildbot # [ 85.948710] twistd[1161]: 'SHLVL': '0',2896buildbot # [ 85.949903] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2897buildbot # [ 85.953268] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2898buildbot # [ 85.955947] twistd[1161]: 'USER': 'buildbot-worker',2899buildbot # [ 85.957379] twistd[1161]: 'WORKER_COUNT': '0',2900buildbot # [ 85.959478] twistd[1161]: 'WORKER_NAME': 'local-worker',2901buildbot # [ 85.961384] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2902buildbot # [ 85.965779] twistd[1161]: 2026-08-30T07:52:01+0000 [Broker,client] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): using PTY: False2903buildbot # [ 85.987817] twistd[1161]: 2026-08-30T07:52:02+0000 [-] (command ['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']): command finished with signal None, exit code 0, elapsedTime: 0.1274352904buildbot # [ 85.992298] twistd[1161]: 2026-08-30T07:52:02+0000 [-] (command 39): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ae350>2905buildbot # [ 85.999507] twistd[1160]: 2026-08-30T07:52:02+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '8e6065c83b433d9310de308b6855cb407ba71c16']'> rc=02906buildbot # % Total [ 86.033151] twistd[1160]: 2026-08-30T07:52:02+0000 [-] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'>: RemoteCommand.run [40]2907buildbot # [ 86.036109] twistd[1160]: 2026-08-30T07:52:02+0000 [-] command '['git', 'checkout', '-B', 'test-pr-effects']' in dir 'build'2908buildbot # % Received % [ 86.042443] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command 40): startCommand:shell2909buildbot # Xferd Avera[ 86.047088] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): RunProcess._startCommand2910buildbot # [ 86.050052] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): git checkout -B test-pr-effects2911buildbot # [ 86.053127] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2912buildbot # [ 86.059720] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): watching logfiles {}2913buildbot # [ 86.062612] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): argv: [b'git', b'checkout', b'-B', b'test-pr-effects']2914buildbot # [ 86.066156] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): environment:2915buildbot # [ 86.068908] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2916buildbot # [ 86.070708] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2917buildbot # ge Speed Time [ 86.072834] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2918buildbot # [ 86.076591] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2919buildbot # [ 86.078464] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2920buildbot # [ 86.080914] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2921buildbot # Time Time [ 86.085215] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2922buildbot # [ 86.086606] twistd[1161]: 'LANG': 'en_US.UTF-8',2923buildbot # [ 86.087927] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2924buildbot # Current2925buildbot # [ 86.094208] twistd[1161]: 'LOGNAME': 'buildbot-worker',2926buildbot # [ 86.095614] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2927buildbot # [ 86.097374] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2928buildbot # [ 86.099957] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2929buildbot # [ 86.104165] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2930buildbot # [ 86.140132] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2931buildbot # [ 86.144364] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2932buildbot # [ 86.145783] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2933buildbot # [ 86.148586] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2934buildbot # [ 86.150306] twistd[1161]: 'SHLVL': '0',2935buildbot # Dl[ 86.154394] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2936buildbot # [ 86.155771] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2937buildbot # [ 86.158194] twistd[1161]: 'USER': 'buildbot-worker',2938buildbot # [ 86.159552] twistd[1161]: 'WORKER_COUNT': '0',2939buildbot # oad Upload Tota[ 86.163813] twistd[1161]: 'WORKER_NAME': 'local-worker',2940buildbot # [ 86.165360] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2941buildbot # [ 86.167767] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): using PTY: False2942buildbot # l Spent Left Speed2943buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 1078[ 86.205232] twistd[1161]: 2026-08-30T07:52:02+0000 [-] (command ['git', 'checkout', '-B', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.1452862944buildbot # [ 86.208742] twistd[1161]: 2026-08-30T07:52:02+0000 [-] (command 40): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ae750>2945buildbot # 8 0 0100 1[ 86.222176] twistd[1160]: 2026-08-30T07:52:02+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'> rc=02946buildbot # 810 100 1810 0 0 9490 0 0100 1810 100 1810 0 0 8687 0 02947buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.39 seconds)2948buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2949buildbot # [ 86.268218] twistd[1160]: 2026-08-30T07:52:02+0000 [-] <RemoteShellCommand '['git', 'submodule', 'sync']'>: RemoteCommand.run [41]2950buildbot # [ 86.271407] twistd[1160]: 2026-08-30T07:52:02+0000 [-] command '['git', 'submodule', 'sync']' in dir 'build'2951buildbot # [ 86.276341] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command 41): startCommand:shell2952buildbot # [ 86.279947] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): RunProcess._startCommand2953buildbot # [ 86.282670] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): git submodule sync2954buildbot # [ 86.285266] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2955buildbot # [ 86.290333] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): watching logfiles {}2956buildbot # [ 86.293405] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): argv: [b'git', b'submodule', b'sync']2957buildbot # [ 86.296351] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): environment:2958buildbot # [ 86.298800] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2959buildbot # [ 86.303262] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2960buildbot # [ 86.305428] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',2961buildbot # [ 86.306967] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',2962buildbot # [ 86.310307] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2963buildbot # [ 86.313306] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2964buildbot # [ 86.317136] twistd[1161]: 'JOURNAL_STREAM': '9:10577',2965buildbot # [ 86.319127] twistd[1161]: 'LANG': 'en_US.UTF-8',2966buildbot # [ 86.320447] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',2967buildbot # [ 86.323352] twistd[1161]: 'LOGNAME': 'buildbot-worker',2968buildbot # [ 86.324765] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2969buildbot # [ 86.329119] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2970buildbot # [ 86.331729] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2971buildbot # [ 86.333711] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',2972buildbot # [ 86.370298] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2973buildbot # [ 86.373134] twistd[1161]: 'PYTHONNOUSERSITE': 'true',2974buildbot # [ 86.375121] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',2975buildbot # [ 86.377935] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',2976buildbot # [ 86.380258] twistd[1161]: 'SHLVL': '0',2977buildbot # [ 86.381408] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',2978buildbot # [ 86.383485] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',2979buildbot # [ 86.386426] twistd[1161]: 'USER': 'buildbot-worker',2980buildbot # [ 86.388819] twistd[1161]: 'WORKER_COUNT': '0',2981buildbot # [ 86.390471] twistd[1161]: 'WORKER_NAME': 'local-worker',2982buildbot # [ 86.392217] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2983buildbot # [ 86.394928] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'sync']): using PTY: False2984buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2985buildbot # Dload Upload Total Spent Left Speed2986buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 42167 0 0100 2411 100 2411 0 0 33505 0 0100 2411 100 2411 0 0 27941 0 02987buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.28 seconds)2988buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2989buildbot # [ 86.585800] twistd[1161]: 2026-08-30T07:52:02+0000 [-] (command ['git', 'submodule', 'sync']): command finished with signal None, exit code 0, elapsedTime: 0.2838132990buildbot # [ 86.589653] twistd[1161]: 2026-08-30T07:52:02+0000 [-] (command 41): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7ad050>2991buildbot # [ 86.598630] twistd[1160]: 2026-08-30T07:52:02+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'sync']'> rc=02992buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2993buildbot # Dload Upload Total Spent Left Speed2994buildbot # 0 0 0 0 0 0 0 [ 86.644910] twistd[1160]: 2026-08-30T07:52:02+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'>: RemoteCommand.run [42]2995buildbot # [ 86.648503] twistd[1160]: 2026-08-30T07:52:02+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']' in dir 'build'2996buildbot # 0 [ 86.655181] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command 42): startCommand:shell2997buildbot # [ 86.657688] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): RunProcess._startCommand2998buildbot # [ 86.661516] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): git submodule update --init --recursive --force --checkout2999buildbot # [ 86.669091] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)3000buildbot # [ 86.674058] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): watching logfiles {}3001buildbot # [ 86.677514] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive', b'--force', b'--checkout']3002buildbot # [ 86.684091] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): environment:3003buildbot # 0[ 86.688095] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',3004buildbot # [ 86.689921] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',3005buildbot # [ 86.692081] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',3006buildbot # [ 86.693608] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',3007buildbot # [ 86.696273] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',3008buildbot # [ 86.698695] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3009buildbot # [ 86.700579] twistd[1161]: 'JOURNAL_STREAM': '9:10577',3010buildbot # [ 86.701986] twistd[1161]: 'LANG': 'en_US.UTF-8',3011buildbot # [ 86.705464] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',3012buildbot # [ 86.708354] twistd[1161]: 'LOGNAME': 'buildbot-worker',3013buildbot # [ 86.709769] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',3014buildbot # [ 86.713829] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',3015buildbot # [ 86.716418] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3016buildbot # [ 86.718409] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',3017buildbot # 100 2096 100 [ 86.757653] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',3018buildbot # [ 86.761271] twistd[1161]: 'PYTHONNOUSERSITE': 'true',3019buildbot # 2096 0 [ 86.764119] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',3020buildbot # [ 86.766916] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',3021buildbot # [ 86.768607] twistd[1161]: 'SHLVL': '0',3022buildbot # 0 14213 [ 86.773197] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',3023buildbot # [ 86.774606] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',3024buildbot # [ 86.777050] twistd[1161]: 'USER': 'buildbot-worker',3025buildbot # [ 86.779194] twistd[1161]: 'WORKER_COUNT': '0',3026buildbot # [ 86.780592] twistd[1161]: 'WORKER_NAME': 'local-worker',3027buildbot # [ 86.782078] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}3028buildbot # [ 86.784506] twistd[1161]: 2026-08-30T07:52:02+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): using PTY: False3029buildbot # 0 0100 2096 100 2096 0 0 11145 0 0100 2096 100 2096 0 0 10386 0 03030buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.29 seconds)3031buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties3032buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3033buildbot # Dload Upload Total Spent Left Speed3034buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 38319 0 0100 2003 100 2003 0 0 30159 0 0100 2003 100 2003 0 0 24652 0 03035buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.15 seconds)3036buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties3037buildbot # [ 86.993899] twistd[1161]: 2026-08-30T07:52:03+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): command finished with signal None, exit code 0, elapsedTime: 0.3105553038buildbot # [ 86.999282] twistd[1161]: 2026-08-30T07:52:03+0000 [-] (command 42): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7adfd0>3039buildbot # [ 87.007402] twistd[1160]: 2026-08-30T07:52:03+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'> rc=03040buildbot # [ 87.032480] twistd[1160]: 2026-08-30T07:52:03+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [43]3041buildbot # [ 87.036433] twistd[1160]: 2026-08-30T07:52:03+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'3042buildbot # [ 87.041238] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command 43): startCommand:shell3043buildbot # [ 87.044155] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand3044buildbot # [ 87.046948] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD3045buildbot # [ 87.050176] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)3046buildbot # [ 87.054231] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}3047buildbot # [ 87.057420] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']3048buildbot # [ 87.060876] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:3049buildbot # [ 87.064146] twistd[1161]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',3050buildbot # [ 87.066078] twistd[1161]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',3051buildbot # [ 87.068627] twistd[1161]: 'HOME': '/var/lib/buildbot-worker',3052buildbot # [ 87.071271] twistd[1161]: 'INVOCATION_ID': '232d1366c48d42e49a0e8ffc711b9a2c',3053buildbot # [ 87.073198] twistd[1161]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',3054buildbot # [ 87.075705] twistd[1161]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3055buildbot # [ 87.078103] twistd[1161]: 'JOURNAL_STREAM': '9:10577',3056buildbot # [ 87.080687] twistd[1161]: 'LANG': 'en_US.UTF-8',3057buildbot # [ 87.082110] twistd[1161]: 'LOCALE_ARCHIVE': '/nix/store/0da8w48lpq7zgyp7slalhlljjrqn7nsx-glibc-locales-2.42-84/lib/locale/locale-archive',3058buildbot # [ 87.085517] twistd[1161]: 'LOGNAME': 'buildbot-worker',3059buildbot # [ 87.087583] twistd[1161]: 'MASTER_URL': 'tcp:host=localhost:port=9989',3060buildbot # [ 87.089491] twistd[1161]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',3061buildbot # [ 87.093133] twistd[1161]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',3062buildbot # [ 87.095309] twistd[1161]: 'PATH': '/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin:/nix/store/4lnd7vb5a9w61rjyhw6j3cwdhk608dm2-python3.14-twisted-26.4.0/bin:/nix/store/fyda082w2nxnzllc4ln2s16d57g1bmw7-python3.14-automat-25.4.16/bin:/nix/store/cxn8450cl2vwyfaim125lx3avqn2pbyg-python3.14-idna-3.18/bin:/nix/store/1s7shagynsy8vryvdnzkr4mspqggbq56-python3.14-incremental-24.11.0/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/bin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/bin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/bin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/bin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/bin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/bin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/bin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/bin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/bin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/bin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/bin:/nix/store/zpilghpfzjbdirmmvry63afa9xnhrisc-cachix-1.12.0-bin/sbin:/nix/store/8yjpgadavqdwphcd2kw4dfvxmgdp5sb3-git-2.55.0/sbin:/nix/store/ggcm0s524bsly3qc7kww945qs7003psf-openssh-10.5p1/sbin:/nix/store/7vb637v8mqbycvmpwfl5q93ikr2xjpay-nix-2.34.8/sbin:/nix/store/7a60q5dgnv6z96c279rc1nalyiw4mgqn-bash-interactive-5.3p15/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/2r9gcrd8ya76afdbgjj1p2a0i2h1s5gy-nix-eval-jobs-2.35.2/sbin:/nix/store/wrhy9qr4hxwrsz9wncpb0mwibwxf6dpj-buildbot-effects/sbin:/nix/store/3qgy8q2j64v2m9jy3a5jmssacbblhd4r-coreutils-9.11/sbin:/nix/store/i4kjidyvl8ciwbcwm75g75sriq3knav0-findutils-4.11.0/sbin:/nix/store/yhr4ps9rdmb55pgqaq246vlh7xfac1dx-gnugrep-3.12/sbin:/nix/store/4nylac9gazdpsid79qyk0jpqm312b2jx-gnused-4.10/sbin:/nix/store/sm8d6jpilwdy3bw3yq2lv8rr8jld26pb-systemd-261.2/sbin',3063buildbot # [ 87.132816] twistd[1161]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',3064buildbot # [ 87.136079] twistd[1161]: 'PYTHONNOUSERSITE': 'true',3065buildbot # [ 87.137505] twistd[1161]: 'PYTHONPATH': '/nix/store/xsddrndbba0i51dv7m9j3d74hjr2j5pa-python3-3.14.7-env/lib/python3.14/site-packages',3066buildbot # [ 87.140340] twistd[1161]: 'SHELL': '/run/current-system/sw/bin/bash',3067buildbot # [ 87.142705] twistd[1161]: 'SHLVL': '0',3068buildbot # [ 87.144137] twistd[1161]: 'SYSTEMD_EXEC_PID': '1161',3069buildbot # [ 87.146313] twistd[1161]: 'TZDIR': '/nix/store/p0ff33dca0fbkskqwrl3spvxcn5974h0-tzdata-2026c/share/zoneinfo',3070buildbot # [ 87.149390] twistd[1161]: 'USER': 'buildbot-worker',3071buildbot # [ 87.151650] twistd[1161]: 'WORKER_COUNT': '0',3072buildbot # [ 87.153155] twistd[1161]: 'WORKER_NAME': 'local-worker',3073buildbot # [ 87.154682] twistd[1161]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}3074buildbot # [ 87.158266] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False3075buildbot # % Total % Received % Xferd Average Speed T[ 87.180153] twistd[1161]: 2026-08-30T07:52:03+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.1149513076buildbot # [ 87.183413] twistd[1161]: 2026-08-30T07:52:03+0000 [-] (command 43): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7aeb50>3077buildbot # ime Time Time Current3078buildbot # [ 87.196895] twistd[1160]: 2026-08-30T07:52:03+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=03079buildbot # Dload Upload Total Spent Left Speed3080buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 32787 0 0100 2003 100 2003 0 0 26763 0 [ 87.255088] twistd[1160]: 2026-08-30T07:52:03+0000 [-] Got Git revision 8e6065c83b433d9310de308b6855cb407ba71c163081buildbot # 0100 2003 100 2003 0 0 21855 0 03082buildbot # [ 87.279735] twistd[1160]: 2026-08-30T07:52:03+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []3083buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.31 seconds)3084buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3085buildbot # [ 87.301059] twistd[1160]: 2026-08-30T07:52:03+0000 [-] step 'git' complete: success (None)3086buildbot # [ 87.320665] twistd[1160]: 2026-08-30T07:52:03+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [44]3087buildbot # [ 87.326864] twistd[1160]: 2026-08-30T07:52:03+0000 [-] command '['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'3088buildbot # [ 87.333786] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command 44): startCommand:shell3089buildbot # [ 87.336331] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand3090buildbot # [ 87.342173] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev 8e6065c83b433d9310de308b6855cb407ba71c16 --branch test-pr-effects --repo gitea-admin/test-flake test-effect3091buildbot # [ 87.349534] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)3092buildbot # [ 87.357867] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}3093buildbot # [ 87.362802] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'8e6065c83b433d9310de308b6855cb407ba71c16', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake', b'test-effect']3094buildbot # [ 87.370392] twistd[1161]: 2026-08-30T07:52:03+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False3095buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3096buildbot # Dload Upload Total Spent Left Speed3097buildbot # 0 0 0 0 0 0 0 0 0100 3343 100 3343 0 0 68578 0 0100 3343 100 3343 0 0 53131 0 0100 3343 100 3343 0 0 42868 0 03098buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.21 seconds)3099buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3100buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3101buildbot # Dload Upload Total Spent Left Speed3102buildbot # 0 0 0 0 0 0 0 0 0100 3343 100 3343 0 0 62835 0 0100 3343 100 3343 0 0 49402 0 0100 3343 100 3343 0 0 40906 0 03103buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.15 seconds)3104buildbot # [ 87.831426] nix-daemon[1426]: accepted connection from pid 2162, user buildbot-worker3105buildbot # [ 87.879447] twistd[1161]: 2026-08-30T07:52:03+0000 [-] (command ['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.5216383106buildbot # [ 87.885110] twistd[1161]: 2026-08-30T07:52:03+0000 [-] (command 44): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742d1f7af3d0>3107buildbot # [ 87.891110] twistd[1160]: 2026-08-30T07:52:03+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '8e6065c83b433d9310de308b6855cb407ba71c16', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=13108buildbot # [ 87.925318] twistd[1160]: 2026-08-30T07:52:03+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []3109buildbot # [ 87.936918] twistd[1160]: 2026-08-30T07:52:03+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])3110buildbot # [ 87.939628] twistd[1160]: 2026-08-30T07:52:03+0000 [-] <Build gitea-admin/test-flake/run-effect number:2 results:failure>: build finished3111buildbot # [ 87.951553] twistd[1160]: 2026-08-30T07:52:03+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []3112buildbot # [ 88.082331] twistd[1160]: 2026-08-30T07:52:04+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []3113buildbot # [ 88.096868] twistd[1160]: 2026-08-30T07:52:04+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])3114buildbot # [ 88.120973] twistd[1160]: 2026-08-30T07:52:04+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0x7885f83d7b60>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b73d0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7885f84b7480>, logEnviron=False)): []3115buildbot # [ 88.144745] twistd[1160]: 2026-08-30T07:52:04+0000 [-] step 'Evaluate scheduled effects' complete: skipped (None)3116buildbot # [ 88.147128] twistd[1160]: 2026-08-30T07:52:04+0000 [-] <Build gitea-admin/test-flake/nix-eval number:2 results:failure>: build finished3117buildbot # [ 88.164117] twistd[1160]: 2026-08-30T07:52:04+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []3118buildbot # [ 88.279355] gitea[890]: 2026/08/30 07:52:04 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/8e6065c83b433d9310de308b6855cb407ba71c16 for [::1]:43980, 201 Created in 162.4ms @ repo/status.go:21(repo.NewCommitStatus)3119buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds3120buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3121buildbot # Dload Upload Total Spent Left Speed3122buildbot # 0 0 0 0 0 0 0 0 0100 2712 100 2712 0 0 75398 0 0100 2712 100 2712 0 0 59202 0 0100 2712 100 2712 0 0 48796 0 03123buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)3124buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties3125buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3126buildbot # Dload Upload Total Spent Left Speed3127buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 25424 0 0100 937 100 937 0 0 19808 0 0100 937 100 937 0 0 16413 0 03128buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.12 seconds)3129buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties3130buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3131buildbot # Dload Upload Total Spent Left Speed3132buildbot # 0 0 0 0 0 0 0 0 0100 1810 100 1810 0 0 51599 0 0100 1810 100 1810 0 0 40109 0 0100 1810 100 1810 0 0 32971 0 03133buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.11 seconds)3134buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties3135buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3136buildbot # Dload Upload Total Spent Left Speed3137buildbot # 0 0 0 0 0 0 0 0 0100 2411 100 2411 0 0 66953 0 0100 2411 100 2411 0 0 52195 0 0100 2411 100 2411 0 0 43050 0 03138buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)3139buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties3140buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3141buildbot # Dload Upload Total Spent Left Speed3142buildbot # 0 0 0 0 0 0 0 0 0100 2096 100 2096 0 0 55430 0 0100 2096 100 2096 0 0 43745 0 0100 2096 100 2096 0 0 36329 0 03143buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.12 seconds)3144buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties3145buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3146buildbot # Dload Upload Total Spent Left Speed3147buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 54744 0 0100 2003 100 2003 0 0 42380 0 0100 2003 100 2003 0 0 34993 0 03148buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)3149buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties3150buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3151buildbot # Dload Upload Total Spent Left Speed3152buildbot # 0 0 0 0 0 0 0 0 0100 2003 100 2003 0 0 54964 0 0100 2003 100 2003 0 0 42452 0 0100 2003 100 2003 0 0 35108 0 03153buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)3154buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/7/properties3155buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3156buildbot # Dload Upload Total Spent Left Speed3157buildbot # 0 0 0 0 0 0 0 0 0100 2105 100 2105 0 0 58347 0 0100 2105 100 2105 0 0 45326 0 0100 2105 100 2105 0 0 37408 0 03158buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/7/properties, in 0.12 seconds)3159buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3160buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3161buildbot # Dload Upload Total Spent Left Speed3162buildbot # 0 0 0 0 0 0 0 0 0100 3343 100 3343 0 0 89981 0 0100 3343 100 3343 0 0 70829 0 0100 3343 100 3343 0 0 58678 0 03163buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)3164buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties3165buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3166buildbot # Dload Upload Total Spent Left Speed3167buildbot # 0 0 0 0 0 0 0 0 0100 3343 100 3343 0 0 93408 0 0100 3343 100 3343 0 0 72694 0 0100 3343 100 3343 0 0 59959 0 03168buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/properties, in 0.12 seconds)3169buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps3170buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3171buildbot # Dload Upload Total Spent Left Speed3172buildbot # 0 0 0 0 0 0 0 0 0100 3522 100 3522 0 0 96535 0 0100 3522 100 3522 0 0 75655 0 0100 3522 100 3522 0 0 62401 0 03173buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps, in 0.12 seconds)3174buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps3175buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3176buildbot # Dload Upload Total Spent Left Speed3177buildbot # 0 0 0 0 0 0 0 0 0100 3522 100 3522 0 0 97016 0 0100 3522 100 3522 0 0 75325 0 0100 3522 100 3522 0 0 62022 0 03178buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/6/steps, in 0.12 seconds)3179(finished: subtest: PR with effects_on_pull_requests runs effects, in 15.79 seconds)3180(finished: run the VM test script, in 91.28 seconds)3181test script finished in 91.33s3182cleanup3183kill QemuMachine (pid 45)3184buildbot # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14)3185(finished: cleanup, in 0.03 seconds)3186additionally exposed symbols:3187 buildbot,3188 vlan1,3189 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh3190Token created: 32d469c80e...3191{'meta': {'total': 0}, 'projects': []}3192Project not yet registered, current projects: []3193{'meta': {'total': 1},3194 'projects': [{'active': None,3195 'description': None,3196 'description_format': None,3197 'description_html': None,3198 'name': 'gitea-admin/test-flake',3199 'projectid': 1,3200 'slug': 'gitea-admin/test-flake'}]}3201nix-eval build not found yet3202nix-eval build not found yet3203nix-eval build not found yet3204nix-eval build not found yet3205nix-eval build not found yet3206nix-eval build still running3207nix-eval build still running3208nix-eval build still running3209nix-eval build still running3210nix-eval build still running3211nix-eval build still running3212nix-eval build still running3213nix-eval build still running3214nix-eval build still running3215nix-eval build still running3216nix-eval build still running3217nix-eval build still running3218nix-eval build still running3219nix-eval build still running3220nix-eval build still running3221nix-eval build still running3222nix-eval build completed with result: 23223PR eval build not found yet3224PR eval build still running3225PR eval build still running3226PR eval build still running3227PR eval build still running3228PR eval build result: 2