tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600.0 seconds run the VM test script start all VMs node1: starting vm node1: QEMU running (pid 46) node1 # Disk image does not exist, creating the virtualisation disk image... node1 # Formatting '/build/vm-state-node1/tmp.zJANjZc438', fmt=raw size=1073741824 (finished: start all VMs, in 0.22 seconds) node1 # mke2fs 1.47.4 (6-Mar-2025) node1: waiting for unit buildbot-master node1 # Discarding device blocks: 0/262144 done node1: waiting for the VM to finish booting node1 # Creating filesystem with 262144 4k blocks and 65536 inodes node1 # Filesystem UUID: 8745debb-4e7c-47a6-a8c6-6a9758e0080f node1 # Superblock backups stored on blocks: node1 # 32768, 98304, 163840, 229376 node1 # node1 # Allocating group tables: 0/8 done node1 # Writing inode tables: 0/8 done node1 # Creating journal (8192 blocks): done node1 # Writing superblocks and filesystem accounting information: 0/8 done node1 # node1 # Virtualisation disk image created. node1 # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) node1 # node1 # node1 # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 node1 # Press Ctrl-B to configure iPXE (PCI 00:02.0)... node1 # node1 # node1 # node1 # node1 # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 node1 # Press Ctrl-B to configure iPXE (PCI 00:08.0)... node1 # node1 # node1 # Booting from ROM... node1 # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.48 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Aug 28 06:22:54 UTC 2026 node1 # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/yzzhymjyzlrx68ayqibfdillisg9hsfz-nixos-system-node1-test/init regInfo=/nix/store/2lqw6ks3w5l8ja6c8wmn1657nlbqlp92-closure-info/registration console=ttyS0,115200n8 console=tty0 node1 # [ 0.000000] BIOS-provided physical RAM map: node1 # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable node1 # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable node1 # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved node1 # [ 0.000000] NX (Execute Disable) protection: active node1 # [ 0.000000] APIC: Static calls initialized node1 # [ 0.000000] SMBIOS 2.8 present. node1 # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 node1 # [ 0.000000] DMI: Memory slots populated: 1/1 node1 # [ 0.000000] Hypervisor detected: KVM node1 # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 node1 # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 node1 # [ 0.000001] kvm-clock: using sched offset of 553060245 cycles node1 # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns node1 # [ 0.000005] tsc: Detected 2400.010 MHz processor node1 # [ 0.000812] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 node1 # [ 0.000849] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs node1 # [ 0.000852] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT node1 # [ 0.002773] found SMP MP-table at [mem 0x000f5450-0x000f545f] node1 # [ 0.002785] Using GB pages for direct mapping node1 # [ 0.002857] RAMDISK: [mem 0x3e36a000-0x3ffcffff] node1 # [ 0.002864] ACPI: Early table checksum verification disabled node1 # [ 0.002867] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) node1 # [ 0.002871] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002875] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002882] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002884] ACPI: FACS 0x000000003FFE0000 000040 node1 # [ 0.002886] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002887] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002889] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002890] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002892] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] node1 # [ 0.002893] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] node1 # [ 0.002893] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] node1 # [ 0.002894] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] node1 # [ 0.002894] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] node1 # [ 0.002895] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] node1 # [ 0.002895] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] node1 # [ 0.003388] No NUMA configuration found node1 # [ 0.003389] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] node1 # [ 0.003393] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] node1 # [ 0.006219] Zone ranges: node1 # [ 0.006220] DMA [mem 0x0000000000001000-0x0000000000ffffff] node1 # [ 0.006222] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] node1 # [ 0.006223] Normal empty node1 # [ 0.006224] Device empty node1 # [ 0.006224] Movable zone start for each node node1 # [ 0.006225] Early memory node ranges node1 # [ 0.006226] node 0: [mem 0x0000000000001000-0x000000000009efff] node1 # [ 0.006227] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] node1 # [ 0.006228] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] node1 # [ 0.006247] On node 0, zone DMA: 1 pages in unavailable ranges node1 # [ 0.006548] On node 0, zone DMA: 97 pages in unavailable ranges node1 # [ 0.026134] On node 0, zone DMA32: 40 pages in unavailable ranges node1 # [ 0.027241] ACPI: PM-Timer IO Port: 0x608 node1 # [ 0.027255] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) node1 # [ 0.027285] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 node1 # [ 0.027288] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) node1 # [ 0.027290] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) node1 # [ 0.027291] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) node1 # [ 0.027292] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) node1 # [ 0.027292] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) node1 # [ 0.027295] ACPI: Using ACPI (MADT) for SMP configuration information node1 # [ 0.027296] ACPI: HPET id: 0x8086a201 base: 0xfed00000 node1 # [ 0.027300] TSC deadline timer available node1 # [ 0.027304] CPU topo: Max. logical packages: 1 node1 # [ 0.027305] CPU topo: Max. logical dies: 1 node1 # [ 0.027305] CPU topo: Max. dies per package: 1 node1 # [ 0.027309] CPU topo: Max. threads per core: 1 node1 # [ 0.027309] CPU topo: Num. cores per package: 1 node1 # [ 0.027309] CPU topo: Num. threads per package: 1 node1 # [ 0.027310] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs node1 # [ 0.027328] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() node1 # [ 0.027365] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] node1 # [ 0.027367] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] node1 # [ 0.027368] [mem 0x40000000-0xafffffff] available for PCI devices node1 # [ 0.027369] Booting paravirtualized kernel on KVM node1 # [ 0.027372] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns node1 # [ 0.031856] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 node1 # [ 0.032958] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 node1 # [ 0.033005] kvm-guest: PV spinlocks disabled, single CPU node1 # [ 0.033006] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/yzzhymjyzlrx68ayqibfdillisg9hsfz-nixos-system-node1-test/init regInfo=/nix/store/2lqw6ks3w5l8ja6c8wmn1657nlbqlp92-closure-info/registration console=ttyS0,115200n8 console=tty0 node1 # [ 0.033101] Unknown kernel command line parameters "regInfo=/nix/store/2lqw6ks3w5l8ja6c8wmn1657nlbqlp92-closure-info/registration", will be passed to user space. node1 # [ 0.033114] random: crng init done node1 # [ 0.033114] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes node1 # [ 0.034302] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) node1 # [ 0.034315] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) node1 # [ 0.034345] Fallback order for Node 0: 0 node1 # [ 0.034348] Built 1 zonelists, mobility grouping on. Total pages: 262006 node1 # [ 0.034349] Policy zone: DMA32 node1 # [ 0.034847] mem auto-init: stack:all(zero), heap alloc:on, heap free:off node1 # [ 0.037428] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 node1 # [ 0.039906] allocated 2097152 bytes of page_ext node1 # [ 0.049826] ftrace: allocating 48733 entries in 192 pages node1 # [ 0.049828] ftrace: allocated 192 pages with 2 groups node1 # [ 0.050709] Dynamic Preempt: lazy node1 # [ 0.050903] rcu: Preemptible hierarchical RCU implementation. node1 # [ 0.050904] rcu: RCU event tracing is enabled. node1 # [ 0.050904] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. node1 # [ 0.050906] Trampoline variant of Tasks RCU enabled. node1 # [ 0.050906] Rude variant of Tasks RCU enabled. node1 # [ 0.050906] Tracing variant of Tasks RCU enabled. node1 # [ 0.050907] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. node1 # [ 0.050908] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 node1 # [ 0.050929] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.050930] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.050931] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.055356] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 node1 # [ 0.055644] rcu: srcu_init: Setting srcu_struct sizes based on contention. node1 # [ 0.055651] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns node1 # [ 0.055759] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) node1 # [ 0.063215] Console: colour VGA+ 80x25 node1 # [ 0.063219] printk: legacy console [tty0] enabled node1 # [ 0.105951] printk: legacy console [ttyS0] enabled node1 # [ 0.300836] ACPI: Core revision 20250807 node1 # [ 0.302437] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns node1 # [ 0.305309] APIC: Switch to symmetric I/O mode setup node1 # [ 0.307044] x2apic enabled node1 # [ 0.308276] APIC: Switched APIC routing to: physical x2apic node1 # [ 0.311128] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 node1 # [ 0.312941] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns node1 # [ 0.316006] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400010) node1 # [ 0.318122] x86/cpu: User Mode Instruction Prevention (UMIP) activated node1 # [ 0.319155] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 node1 # [ 0.320004] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 node1 # [ 0.321008] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto node1 # [ 0.322004] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl node1 # [ 0.323004] Transient Scheduler Attacks: Mitigation: Clear CPU buffers node1 # [ 0.325004] Spectre V2 : Mitigation: Enhanced / Automatic IBRS node1 # [ 0.327004] Speculative Return Stack Overflow: Mitigation: Safe RET node1 # [ 0.328004] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization node1 # [ 0.330013] Spectre V2 : Enabling IBPB for BPF node1 # [ 0.331005] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier node1 # [ 0.333013] active return thunk: srso_alias_return_thunk node1 # [ 0.334033] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' node1 # [ 0.336004] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' node1 # [ 0.338003] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' node1 # [ 0.339004] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' node1 # [ 0.341004] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' node1 # [ 0.343004] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' node1 # [ 0.344004] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' node1 # [ 0.345004] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' node1 # [ 0.347004] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' node1 # [ 0.348005] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 node1 # [ 0.349004] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 node1 # [ 0.350004] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 node1 # [ 0.351004] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 node1 # [ 0.352004] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 node1 # [ 0.354004] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16 node1 # [ 0.356004] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24 node1 # [ 0.357004] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format. node1 # [ 0.391595] Freeing SMP alternatives memory: 44K node1 # [ 0.392006] pid_max: default: 32768 minimum: 301 node1 # [ 0.393121] LSM: initializing lsm=capability,landlock,yama,bpf,ima node1 # [ 0.394126] landlock: Up and running. node1 # [ 0.395004] Yama: becoming mindful. node1 # [ 0.397122] LSM support for eBPF active node1 # [ 0.398100] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) node1 # [ 0.399030] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) node1 # [ 0.402199] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) node1 # [ 0.403598] Performance Events: Fam17h+ core perfctr, AMD PMU driver. node1 # [ 0.404014] ... version: 2 node1 # [ 0.405005] ... bit width: 48 node1 # [ 0.406006] ... generic counters: 6 node1 # [ 0.407005] ... generic bitmap: 000000000000003f node1 # [ 0.408006] ... fixed-purpose counters: 0 node1 # [ 0.409005] ... fixed-purpose bitmap: 0000000000000000 node1 # [ 0.410005] ... value mask: 0000ffffffffffff node1 # [ 0.411006] ... max period: 00007fffffffffff node1 # [ 0.412005] ... global_ctrl mask: 000000000000003f node1 # [ 0.413131] signal: max sigframe size: 3376 node1 # [ 0.414163] rcu: Hierarchical SRCU implementation. node1 # [ 0.415009] rcu: Max phase no-delay instances is 400. node1 # [ 0.420736] smp: Bringing up secondary CPUs ... node1 # [ 0.422019] smp: Brought up 1 node, 1 CPU node1 # [ 0.423008] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) node1 # [ 0.424178] Memory: 941032K/1048024K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 99604K reserved, 0K cma-reserved) node1 # [ 0.425271] devtmpfs: initialized node1 # [ 0.426211] x86/mm: Memory block size: 128MB node1 # [ 0.428069] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) node1 # [ 0.429038] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). node1 # [ 0.430112] pinctrl core: initialized pinctrl subsystem node1 # [ 0.431394] PM: RTC time: 07:50:32, date: 2026-08-30 node1 # [ 0.434938] NET: Registered PF_NETLINK/PF_ROUTE protocol family node1 # [ 0.436416] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations node1 # [ 0.437029] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations node1 # [ 0.438196] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations node1 # [ 0.439017] audit: initializing netlink subsys (disabled) node1 # [ 0.440300] thermal_sys: Registered thermal governor 'fair_share' node1 # [ 0.440302] thermal_sys: Registered thermal governor 'bang_bang' node1 # [ 0.441007] thermal_sys: Registered thermal governor 'step_wise' node1 # [ 0.442009] audit: type=2000 audit(1788076232.236:1): state=initialized audit_enabled=0 res=1 node1 # [ 0.444008] thermal_sys: Registered thermal governor 'user_space' node1 # [ 0.444010] thermal_sys: Registered thermal governor 'power_allocator' node1 # [ 0.445041] cpuidle: using governor menu node1 # [ 0.448230] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 node1 # [ 0.449309] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] node1 # [ 0.450009] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry node1 # [ 0.451021] PCI: Using configuration type 1 for base access node1 # [ 0.452223] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. node1 # [ 0.457268] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages node1 # [ 0.458006] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page node1 # [ 0.463006] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages node1 # [ 0.464006] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page node1 # [ 0.474414] ACPI: Added _OSI(Module Device) node1 # [ 0.475007] ACPI: Added _OSI(Processor Device) node1 # [ 0.479683] ACPI: Added _OSI(Processor Aggregator Device) node1 # [ 0.485602] ACPI: 1 ACPI AML tables successfully acquired and loaded node1 # [ 0.489182] ACPI: Interpreter enabled node1 # [ 0.490023] ACPI: PM: (supports S0 S3 S4 S5) node1 # [ 0.493006] ACPI: Using IOAPIC for interrupt routing node1 # [ 0.494046] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug node1 # [ 0.497005] PCI: Using E820 reservations for host bridge windows node1 # [ 0.498161] ACPI: Enabled 2 GPEs in block 00 to 3F node1 # [ 0.507138] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) node1 # [ 0.508013] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] node1 # [ 0.509093] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] node1 # [ 0.510171] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] node1 # [ 0.511987] PCI host bridge to bus 0000:00 node1 # [ 0.513009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] node1 # [ 0.514007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] node1 # [ 0.515007] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] node1 # [ 0.516007] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] node1 # [ 0.517007] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] node1 # [ 0.518006] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] node1 # [ 0.519007] pci_bus 0000:00: root bus resource [bus 00-ff] node1 # [ 0.520191] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint node1 # [ 0.521965] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint node1 # [ 0.525112] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] node1 # [ 0.526033] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] node1 # [ 0.527058] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] node1 # [ 0.528233] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] node1 # [ 0.531048] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint node1 # [ 0.534047] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f] node1 # [ 0.535429] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] node1 # [ 0.537058] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] node1 # [ 0.538020] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] node1 # [ 0.540215] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint node1 # [ 0.543046] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f] node1 # [ 0.544020] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] node1 # [ 0.545058] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] node1 # [ 0.547209] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint node1 # [ 0.550045] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf] node1 # [ 0.551020] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] node1 # [ 0.552058] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] node1 # [ 0.554254] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint node1 # [ 0.557044] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f] node1 # [ 0.558020] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] node1 # [ 0.559058] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] node1 # [ 0.561928] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint node1 # [ 0.565043] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf] node1 # [ 0.566020] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] node1 # [ 0.567058] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] node1 # [ 0.570006] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint node1 # [ 0.573045] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f] node1 # [ 0.574021] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] node1 # [ 0.575059] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] node1 # [ 0.577268] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint node1 # [ 0.580042] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df] node1 # [ 0.581021] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] node1 # [ 0.582066] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] node1 # [ 0.583028] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref] node1 # [ 0.585225] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint node1 # [ 0.587597] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] node1 # [ 0.588059] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] node1 # [ 0.590240] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint node1 # [ 0.593059] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff] node1 # [ 0.594021] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] node1 # [ 0.595059] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] node1 # [ 0.597227] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint node1 # [ 0.599973] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff] node1 # [ 0.601021] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] node1 # [ 0.602058] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] node1 # [ 0.604258] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.607731] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f] node1 # [ 0.609375] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.611071] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f] node1 # [ 0.612354] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.614123] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f] node1 # [ 0.615672] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint node1 # [ 0.618021] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] node1 # [ 0.619458] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint node1 # [ 0.620697] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO node1 # [ 0.622491] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint node1 # [ 0.625346] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f] node1 # [ 0.626020] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] node1 # [ 0.627651] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint node1 # [ 0.630070] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] node1 # [ 0.637403] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 node1 # [ 0.638160] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 node1 # [ 0.639158] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 node1 # [ 0.640158] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 node1 # [ 0.641163] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 node1 # [ 0.642162] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 node1 # [ 0.643164] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 node1 # [ 0.644162] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 node1 # [ 0.645069] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 node1 # [ 0.646025] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 node1 # [ 0.647023] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 node1 # [ 0.648029] ACPI: PCI: Interrupt link GSID configured for IRQ 19 node1 # [ 0.649028] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 node1 # [ 0.650027] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 node1 # [ 0.651028] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 node1 # [ 0.652023] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 node1 # [ 0.654154] iommu: Default domain type: Translated node1 # [ 0.655016] iommu: DMA domain TLB invalidation policy: lazy mode node1 # [ 0.656349] ACPI: bus type USB registered node1 # [ 0.657087] usbcore: registered new interface driver usbfs node1 # [ 0.658026] usbcore: registered new interface driver hub node1 # [ 0.659037] usbcore: registered new device driver usb node1 # [ 0.660964] NetLabel: Initializing node1 # [ 0.661850] NetLabel: domain hash size = 128 node1 # [ 0.663005] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO node1 # [ 0.664076] NetLabel: unlabeled traffic allowed by default node1 # [ 0.665025] PCI: Using ACPI for IRQ routing node1 # [ 0.771564] pci 0000:00:01.0: vgaarb: setting as boot VGA device node1 # [ 0.772001] pci 0000:00:01.0: vgaarb: bridge control possible node1 # [ 0.772001] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none node1 # [ 0.772009] vgaarb: loaded node1 # [ 0.773234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 node1 # [ 0.774006] hpet0: 3 comparators, 64-bit 100.000000 MHz counter node1 # [ 0.778123] clocksource: Switched to clocksource kvm-clock node1 # [ 0.782442] VFS: Disk quotas dquot_6.6.0 node1 # [ 0.783706] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) node1 # [ 0.785930] pnp: PnP ACPI init node1 # [ 0.787220] ACPI: IRQ 4 override to edge(!), high(!) node1 # [ 0.788928] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved node1 # [ 0.791589] pnp: PnP ACPI: found 6 devices node1 # [ 0.799806] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns node1 # [ 0.802382] clocksource: Switched to clocksource acpi_pm node1 # [ 0.804099] NET: Registered PF_INET protocol family node1 # [ 0.805859] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) node1 # [ 0.824914] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) node1 # [ 0.827542] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) node1 # [ 0.829854] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) node1 # [ 0.832202] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) node1 # [ 0.834428] TCP: Hash tables configured (established 8192 bind 8192) node1 # [ 0.836427] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) node1 # [ 0.838643] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) node1 # [ 0.840643] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) node1 # [ 0.842844] NET: Registered PF_UNIX/PF_LOCAL protocol family node1 # [ 0.844581] NET: Registered PF_XDP protocol family node1 # [ 0.846098] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] node1 # [ 0.847988] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] node1 # [ 0.849832] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] node1 # [ 0.851919] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] node1 # [ 0.853949] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] node1 # [ 0.855969] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] node1 # [ 0.858795] ACPI: \_SB_.GSIA: Enabled at IRQ 16 node1 # [ 0.861741] ACPI: \_SB_.GSIB: Enabled at IRQ 17 node1 # [ 0.864652] ACPI: \_SB_.GSIC: Enabled at IRQ 18 node1 # [ 0.867523] ACPI: \_SB_.GSID: Enabled at IRQ 19 node1 # [ 0.870122] PCI: CLS 0 bytes, default 64 node1 # [ 0.871697] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns node1 # [ 0.874707] Trying to unpack rootfs image as initramfs... node1 # [ 0.922803] Initialise system trusted keyrings node1 # [ 0.927498] workingset: timestamp_bits=40 max_order=18 bucket_order=0 node1 # [ 0.952934] Key type asymmetric registered node1 # [ 0.954261] Asymmetric key parser 'x509' registered node1 # [ 0.959443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) node1 # [ 0.964447] io scheduler mq-deadline registered node1 # [ 0.968400] io scheduler kyber registered node1 # [ 0.971955] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled node1 # [ 0.974211] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A node1 # [ 0.982758] Linux agpgart interface v0.103 node1 # [ 0.984130] ACPI: bus type drm_connector registered node1 # [ 0.989849] usbcore: registered new interface driver usbserial_generic node1 # [ 0.991810] usbserial: USB Serial support registered for generic node1 # [ 0.996397] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. node1 # [ 0.996397] Please enable it if your BIOS has the CPPC option. node1 # [ 1.000344] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled node1 # [ 1.008556] drop_monitor: Initializing network drop monitor service node1 # [ 1.010603] NET: Registered PF_INET6 protocol family node1 # [ 1.015981] Segment Routing with IPv6 node1 # [ 1.019416] In-situ OAM (IOAM) with IPv6 node1 # [ 1.022727] IPI shorthand broadcast: enabled node1 # [ 1.031618] sched_clock: Marking stable (778029713, 253350426)->(1241954105, -210573966) node1 # [ 1.039657] registered taskstats version 1 node1 # [ 1.041255] Loading compiled-in X.509 certificates node1 # [ 1.063863] Demotion targets for Node 0: null node1 # [ 1.067443] Key type .fscrypt registered node1 # [ 1.068699] Key type fscrypt-provisioning registered node1 # [ 1.072650] ima: No TPM chip found, activating TPM-bypass! node1 # [ 1.074332] ima: Allocated hash algorithm: sha1 node1 # [ 1.079440] ima: No architecture policies found node1 # [ 1.082406] PM: Magic number: 6:795:825 node1 # [ 1.086687] RAS: Correctable Errors collector initialized. node1 # [ 1.096251] clk: Disabling unused clocks node1 # [ 1.101411] PM: genpd: Disabling unused power domains node1 # [ 1.249760] Freeing initrd memory: 29080K node1 # [ 1.253790] Freeing unused decrypted memory: 2028K node1 # [ 1.257340] Freeing unused kernel image (initmem) memory: 3644K node1 # [ 1.259277] Write protecting the kernel read-only data: 32768k node1 # [ 1.262114] Freeing unused kernel image (text/rodata gap) memory: 1216K node1 # [ 1.264645] Freeing unused kernel image (rodata/data gap) memory: 756K node1 # [ 1.317789] x86/mm: Checked W+X mappings: passed, no W+X pages found. node1 # [ 1.319723] Run /init as init process node1 # [ 1.331210] systemd[1]: Inserted module 'autofs4' node1 # [ 1.348994] fuse: init (API version 7.45) node1 # [ 1.355611] ACPI: \_SB_.GSIG: Enabled at IRQ 22 node1 # [ 1.359846] ACPI: \_SB_.GSIH: Enabled at IRQ 23 node1 # [ 1.364786] ACPI: \_SB_.GSIE: Enabled at IRQ 20 node1 # [ 1.368719] ACPI: \_SB_.GSIF: Enabled at IRQ 21 node1 # [ 1.406335] systemd[1]: Successfully made /usr/ read-only. node1 # [ 1.746058] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) node1 # [ 1.770124] systemd[1]: Detected virtualization kvm. node1 # [ 1.774608] systemd[1]: Detected architecture x86-64. node1 # [ 1.779225] systemd[1]: Running in initrd. node1 # [ 1.783910] systemd[1]: Initializing machine ID from random generator. node1 # [ 1.789726] systemd[1]: Hostname set to . node1 # [ 2.015538] systemd[1]: bpf-restrict-fs: LSM BPF program attached node1 # [ 2.075518] systemd[1]: Queued start job for default target Initrd Default Target. node1 # [ 2.080048] systemd[1]: Created slice Slice /system/modprobe. node1 # [ 2.082166] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. node1 # [ 2.084684] systemd[1]: Expecting device /dev/disk/by-label/nixos... node1 # [ 2.086709] systemd[1]: Reached target Path Units. node1 # [ 2.088302] systemd[1]: Reached target Slice Units. node1 # [ 2.089961] systemd[1]: Reached target Swaps. node1 # [ 2.091448] systemd[1]: Reached target Timer Units. node1 # [ 2.093200] systemd[1]: Listening on D-Bus System Message Bus Socket. node1 # [ 2.095442] systemd[1]: Listening on Journal Socket (/dev/log). node1 # [ 2.097543] systemd[1]: Listening on Journal Sockets. node1 # [ 2.099294] systemd[1]: Listening on udev Control Socket. node1 # [ 2.101160] systemd[1]: Listening on udev Kernel Socket. node1 # [ 2.102928] systemd[1]: Reached target Socket Units. node1 # [ 2.117904] systemd[1]: Starting Create List of Static Device Nodes... node1 # [ 2.128056] systemd[1]: Starting Load Kernel Module 9pnet_virtio... node1 # [ 2.137661] systemd[1]: Starting Load Kernel Module configfs... node1 # [ 2.151480] systemd[1]: Starting Journal Service... node1 # [ 2.168489] systemd[1]: Starting Load Kernel Modules... node1 # [ 2.176944] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 2.182521] netfs: FS-Cache loaded node1 # [ 2.188637] systemd[1]: Starting Coldplug All udev Devices... node1 # [ 2.203751] 9pnet: Installing 9P2000 support node1 # [ 2.215495] systemd[1]: Finished Create List of Static Device Nodes. node1 # [ 2.223876] systemd-journald[67]: Collecting audit messages is disabled. node1 # [ 2.226915] systemd[1]: modprobe@configfs.service: Deactivated successfully. node1 # [ 2.241002] systemd[1]: Finished Load Kernel Module configfs. node1 # [ 2.250029] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. node1 # [ 2.254452] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. node1 # [ 2.263034] systemd[1]: Finished Load Kernel Module 9pnet_virtio. node1 # [ 2.267464] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev node1 # [ 2.273209] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config node1 # [ 2.290620] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... node1 # [ 2.314899] systemd[1]: Finished Load Kernel Modules. node1 # [ 2.327819] systemd[1]: Starting Apply Kernel Variables... node1 # [ 2.344545] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. node1 # [ 2.359804] systemd[1]: Starting Create Static Device Nodes in /dev... node1 # [ 2.379550] systemd[1]: Finished Apply Kernel Variables. node1 # [ 2.398562] systemd[1]: Finished Create Static Device Nodes in /dev. node1 # [ 2.404769] systemd[1]: Reached target Preparation for Local File Systems. node1 # [ 2.411538] systemd[1]: Reached target Local File Systems. node1 # [ 2.420718] systemd[1]: Starting Rule-based Manager for Device Events and Files... node1 # [ 2.185209] systemd-modules-load[68]: Inserted module 'dm_mod'[ 2.441520] systemd[1]: Started Journal Service. node1 # node1 # [ 2.189785] systemd-modules-load[68]: Inserted module 'virtio_balloon' node1 # [ 2.191795] systemd-modules-load[68]: Inserted module 'virtio_gpu' node1 # [ 2.216746] systemd[1]: Starting Create System Files and Directories... node1 # [ 2.248398] systemd-udevd[74]: Using default interface naming scheme 'v261'. node1 # [ 2.251103] systemd[1]: Finished Create System Files and Directories. node1 # [ 2.285835] systemd[1]: Started Rule-based Manager for Device Events and Files. node1 # [ 2.333410] systemd[1]: Finished Coldplug All udev Devices. node1 # [ 2.337115] systemd[1]: Reached target System Initialization. node1 # [ 2.339095] systemd[1]: Reached target Basic System. node1 # [ 2.860105] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 node1 # [ 2.887191] virtio_blk virtio5: 1/0/0 default/read/poll queues node1 # [ 2.892742] serio: i8042 KBD port at 0x60,0x64 irq 1 node1 # [ 2.910962] serio: i8042 AUX port at 0x60,0x64 irq 12 node1 # [ 2.920889] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) node1 # [ 2.932431] ehci-pci 0000:00:1d.7: EHCI Host Controller node1 # [ 2.933687] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 node1 # [ 2.937788] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 node1 # [ 2.947533] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 node1 # [ 2.952287] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 node1 # [ 2.956395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.960386] usb usb1: Product: EHCI Host Controller node1 # [ 2.962224] usb usb1: Manufacturer: Linux 6.18.48 ehci_hcd node1 # [ 2.965086] usb usb1: SerialNumber: 0000:00:1d.7 node1 # [ 2.967060] hub 1-0:1.0: USB hub found node1 # [ 2.969863] hub 1-0:1.0: 6 ports detected node1 # [ 2.975897] uhci_hcd 0000:00:1d.0: UHCI Host Controller node1 # [ 2.977169] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 node1 # [ 2.998426] uhci_hcd 0000:00:1d.0: detected 2 ports node1 # [ 3.007821] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200 node1 # [ 3.020142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 3.035916] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.794291] systemd[1]: Starting Virtual Console Setup... node1 # [ 3.057817] usb usb2: Product: UHCI Host Controller node1 # [ 3.064830] SCSI subsystem initialized node1 # [ 3.074152] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 node1 # [ 2.826552] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 2.835377] (udev-worker)[93]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. node1 # [ 2.840346] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 3.095795] usb usb2: Manufacturer: Linux 6.18.48 uhci_hcd node1 # [ 3.097146] usb usb2: SerialNumber: 0000:00:1d.0 node1 # [ 2.846447] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones. node1 # [ 2.850870] systemd[1]: Finished Virtual Console Setup. node1 # [ 3.124436] hub 2-0:1.0: USB hub found node1 # [ 3.134393] hub 2-0:1.0: 2 ports detected node1 # [ 3.143567] uhci_hcd 0000:00:1d.1: UHCI Host Controller node1 # [ 3.153399] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 node1 # [ 2.903486] systemd[1]: Found device /dev/disk/by-label/nixos. node1 # [ 2.905410] systemd[1]: Reached target Initrd Root Device. node1 # [ 2.910235] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... node1 # [ 3.167416] uhci_hcd 0000:00:1d.1: detected 2 ports node1 # [ 3.171578] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220 node1 # [ 3.178444] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 3.186437] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 3.198463] usb usb3: Product: UHCI Host Controller node1 # [ 2.947556] systemd-fsck[108]: nixos: clean, 12/65536 files, 13019/262144 blocks node1 # [ 3.204314] usb usb3: Manufacturer: Linux 6.18.48 uhci_hcd node1 # [ 2.957211] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. node1 # [ 2.961334] systemd[1]: Mounting /sysroot... node1 # [ 3.216401] usb 1-1: new high-speed USB device number 2 using ehci-pci node1 # [ 3.219699] usb usb3: SerialNumber: 0000:00:1d.1 node1 # [ 3.225733] hub 3-0:1.0: USB hub found node1 # [ 3.232118] hub 3-0:1.0: 2 ports detected node1 # [ 3.235631] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode node1 # [ 3.245506] uhci_hcd 0000:00:1d.2: UHCI Host Controller node1 # [ 3.249940] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) node1 # [ 3.261404] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 node1 # [ 3.266762] ahci 0000:00:1f.2: flags: 64bit ncq only node1 # [ 3.270316] uhci_hcd 0000:00:1d.2: detected 2 ports node1 # [ 3.280591] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240 node1 # [ 3.286622] scsi host0: ahci node1 # [ 3.297019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 3.306079] scsi host1: ahci node1 # [ 3.314465] scsi host2: ahci node1 # [ 3.317386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 3.323630] scsi host3: ahci node1 # [ 3.328851] usb usb4: Product: UHCI Host Controller node1 # [ 3.336483] usb usb4: Manufacturer: Linux 6.18.48 uhci_hcd node1 # [ 3.338146] scsi host4: ahci node1 # [ 3.345195] scsi host5: ahci node1 # [ 3.348066] usb usb4: SerialNumber: 0000:00:1d.2 node1 # [ 3.350597] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1 node1 # [ 3.356268] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 node1 # [ 3.358251] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 node1 # [ 3.361203] hub 4-0:1.0: USB hub found node1 # [ 3.363136] usb 1-1: Product: QEMU USB Tablet node1 # [ 3.364564] hub 4-0:1.0: 2 ports detected node1 # [ 3.365658] usb 1-1: Manufacturer: QEMU node1 # [ 3.367271] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1 node1 # [ 3.369297] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 node1 # [ 3.376883] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1 node1 # [ 3.379479] EXT4-fs (vda): mounted filesystem 8745debb-4e7c-47a6-a8c6-6a9758e0080f r/w with ordered data mode. Quota mode: none. node1 # [ 3.131918] systemd[1]: Mounted /sysroot. node1 # [ 3.135105] systemd[1]: Reached target Initrd Root File System. node1 # [ 3.141146] systemd[1]: Mounting /sysroot/nix/.ro-store... node1 # [ 3.150125] systemd[1]: Mounting /sysroot/nix/.rw-store... node1 # [ 3.408406] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1 node1 # [ 3.159102] systemd[1]: Mounting /sysroot/run... node1 # [ 3.173206] systemd[1]: Mounting /sysroot/tmp/shared... node1 # [ 3.432883] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1 node1 # [ 3.183320] systemd[1]: Mounting /sysroot/tmp/xchg... node1 # [ 3.195462] systemd[1]: Starting Mountpoints Configured in the Real Root... node1 # [ 3.458761] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1 node1 # [ 3.239321] systemd-sysroot-fstab-check[134]: /sysroot should be mounted in the initrd, will request daemon-reload. node1 # [ 3.503465] hid: raw HID events driver (C) Jiri Kosina node1 # [ 3.505513] 9p: Installing v9fs 9p2000 file system support node1 # [ 3.263402] systemd[1]: Mounted /sysroot/nix/.rw-store. node1 # [ 3.265369] systemd[1]: Mounted /sysroot/run. node1 # [ 3.271440] systemd[1]: Mounted /sysroot/tmp/shared. node1 # [ 3.273278] systemd[1]: Mounted /sysroot/tmp/xchg. node1 # [ 3.276898] systemd[1]: Reload requested from client PID 134 ('systemd-sysroot') (unit initrd-parse-etc.service)... node1 # [ 3.279906] systemd[1]: Reloading... node1 # [ 3.354676] systemd[1]: Reloading finished in 73 ms. node1 # [ 3.364641] systemd-sysroot-fstab-check[134]: Requesting initrd-fs.target/start/replace... node1 # [ 3.369452] systemd-sysroot-fstab-check[134]: Requesting swap.target/start/replace... node1 # [ 3.373198] systemd[1]: initrd-parse-etc.service: Deactivated successfully. node1 # [ 3.375759] systemd[1]: Finished Mountpoints Configured in the Real Root. node1 # [ 3.378322] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. node1 # [ 3.381681] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio node1 # [ 3.385577] systemd[1]: Starting rw-sysroot-nix-store.service... node1 # [ 3.398778] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. node1 # [ 3.401371] systemd[1]: Finished rw-sysroot-nix-store.service. node1 # [ 3.781815] ata5: SATA link down (SStatus 0 SControl 300) node1 # [ 3.786456] ata4: SATA link down (SStatus 0 SControl 300) node1 # [ 3.790344] ata6: SATA link down (SStatus 0 SControl 300) node1 # [ 3.794472] ata2: SATA link down (SStatus 0 SControl 300) node1 # [ 3.799136] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) node1 # [ 3.803183] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 node1 # [ 3.807180] ata3.00: applying bridge limits node1 # [ 3.810864] ata1: SATA link down (SStatus 0 SControl 300) node1 # [ 3.815023] ata3.00: configured for UDMA/100 node1 # [ 3.819216] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 node1 # [ 3.588294] systemd[1]: Mounted /sysroot/nix/.ro-store. node1 # [ 3.872325] usbcore: registered new interface driver usbhid node1 # [ 3.876011] usbhid: USB HID core driver node1 # [ 3.884949] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 node1 # [ 3.887953] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray node1 # [ 3.889644] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 node1 # [ 3.899568] cdrom: Uniform CD-ROM driver Revision: 3.20 node1 # [ 3.956683] systemd[1]: Mounting /sysroot/nix/store... node1 # [ 4.007413] systemd[1]: Mounted /sysroot/nix/store. node1 # [ 4.009696] systemd[1]: Reached target Initrd File Systems. node1 # [ 4.016213] systemd[1]: Starting Find NixOS closure... node1 # [ 4.023847] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... node1 # [ 4.046862] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. node1 # [ 4.051560] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. node1 # [ 4.059840] systemd[1]: Finished Find NixOS closure. node1 # [ 4.062301] systemd[1]: Reached target Initrd Default Target. node1 # [ 4.064931] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... node1 # [ 4.083329] systemd[1]: initrd-cleanup.service: Deactivated successfully. node1 # [ 4.085807] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. node1 # [ 4.090179] systemd[1]: Stopped target Initrd Default Target. node1 # [ 4.091740] systemd[1]: Stopped target Basic System. node1 # [ 4.094201] systemd[1]: Stopped target Initrd Root Device. node1 # [ 4.095714] systemd[1]: Stopped target Path Units. node1 # [ 4.097180] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. node1 # [ 4.099408] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. node1 # [ 4.102199] systemd[1]: Stopped target Slice Units. node1 # [ 4.103641] systemd[1]: Stopped target Socket Units. node1 # [ 4.105197] systemd[1]: Stopped target System Initialization. node1 # [ 4.107243] systemd[1]: Stopped target Swaps. node1 # [ 4.109231] systemd[1]: Stopped target Timer Units. node1 # [ 4.110644] systemd[1]: dbus.socket: Deactivated successfully. node1 # [ 4.113253] systemd[1]: Closed D-Bus System Message Bus Socket. node1 # [ 4.114922] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. node1 # [ 4.116889] systemd[1]: Stopped Find NixOS closure. node1 # [ 4.119490] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio node1 # [ 4.123253] systemd[1]: Starting rw-sysroot-nix-store.service... node1 # [ 4.124878] systemd[1]: systemd-sysctl.service: Deactivated successfully. node1 # [ 4.127357] systemd[1]: Stopped Apply Kernel Variables. node1 # [ 4.129740] systemd[1]: systemd-modules-load.service: Deactivated successfully. node1 # [ 4.133827] systemd[1]: Stopped Load Kernel Modules. node1 # [ 4.135627] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. node1 # [ 4.137637] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. node1 # [ 4.140431] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. node1 # [ 4.142923] systemd[1]: Stopped Create System Files and Directories. node1 # [ 4.145243] systemd[1]: Stopped target Local File Systems. node1 # [ 4.147867] systemd[1]: Stopped target Preparation for Local File Systems. node1 # [ 4.150382] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. node1 # [ 4.154286] systemd[1]: Stopped Coldplug All udev Devices. node1 # [ 4.155876] systemd[1]: Stopping Rule-based Manager for Device Events and Files... node1 # [ 4.158625] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 4.162215] systemd[1]: Stopped Virtual Console Setup. node1 # [ 4.164210] systemd[1]: systemd-udevd.service: Deactivated successfully. node1 # [ 4.166199] systemd[1]: Stopped Rule-based Manager for Device Events and Files. node1 # [ 4.170102] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. node1 # [ 4.173384] systemd[1]: Closed udev Control Socket. node1 # [ 4.175155] systemd[1]: Starting Cleanup udev Database... node1 # [ 4.177122] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. node1 # [ 4.179171] systemd[1]: Stopped Create Static Device Nodes in /dev. node1 # [ 4.181222] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. node1 # [ 4.184344] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. node1 # [ 4.186205] systemd[1]: kmod-static-nodes.service: Deactivated successfully. node1 # [ 4.188124] systemd[1]: Stopped Create List of Static Device Nodes. node1 # [ 4.190449] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. node1 # [ 4.194206] systemd[1]: Finished rw-sysroot-nix-store.service. node1 # [ 4.211902] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. node1 # [ 4.214783] systemd[1]: Finished Cleanup udev Database. node1 # [ 4.217253] systemd[1]: Reached target Switch Root. node1 # [ 4.219487] systemd[1]: Starting NixOS Activation... node1 # [ 4.401541] initrd-nixos-activation-start[194]: booting system configuration /nix/store/yzzhymjyzlrx68ayqibfdillisg9hsfz-nixos-system-node1-test node1 # [ 4.476624] initrd-nixos-activation-start[194]: running activation script... node1 # [ 4.965704] initrd-nixos-activation-start[217]: setting up /etc... node1 # [ 5.251336] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. node1 # [ 5.254173] systemd[1]: Finished NixOS Activation. node1 # [ 5.256729] systemd[1]: Starting Switch Root... node1 # [ 5.272246] systemd[1]: Switching root. node1 # [ 5.656039] systemd-journald[67]: Received SIGTERM from PID 1 (systemd). node1 # [ 5.816225] NET: Registered PF_VSOCK protocol family node1 # [ 6.207827] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) node1 # [ 6.224501] systemd[1]: Detected virtualization kvm. node1 # [ 6.227576] systemd[1]: Detected architecture x86-64. node1 # [ 6.230942] systemd[1]: Detected first boot. node1 # [ 6.239141] systemd[1]: Initializing machine ID from random generator. node1 # [ 6.378747] systemd[1]: bpf-restrict-fs: LSM BPF program attached node1 # [ 6.515145] systemd[1]: Applying preset policy. node1 # [ 7.069910] systemd[1]: Populated /etc with preset unit settings. node1 # [ 7.611461] systemd[1]: initrd-switch-root.service: Deactivated successfully. node1 # [ 7.613889] systemd[1]: Stopped initrd-switch-root.service. node1 # [ 7.617866] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. node1 # [ 7.621162] systemd[1]: Created slice Slice /system/getty. node1 # [ 7.623300] systemd[1]: Created slice User and Session Slice. node1 # [ 7.624928] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. node1 # [ 7.627111] systemd[1]: Started Forward Password Requests to Wall Directory Watch. node1 # [ 7.641517] systemd[1]: Expecting device /dev/hvc0... node1 # [ 7.642803] systemd[1]: Expecting device /dev/ttyS0... node1 # [ 7.644183] systemd[1]: Reached target Local Encrypted Volumes. node1 # [ 7.645701] systemd[1]: Stopped target initrd-fs.target. node1 # [ 7.647061] systemd[1]: Stopped target initrd-root-fs.target. node1 # [ 7.648517] systemd[1]: Stopped target initrd-switch-root.target. node1 # [ 7.650072] systemd[1]: Reached target Virtual Machines and Containers. node1 # [ 7.651718] systemd[1]: Reached target Path Units. node1 # [ 7.653020] systemd[1]: Reached target Remote File Systems. node1 # [ 7.654503] systemd[1]: Reached target Slice Units. node1 # [ 7.655771] systemd[1]: Reached target Swaps. node1 # [ 7.659812] systemd[1]: Listening on Query the User Interactively for a Password. node1 # [ 7.664637] systemd[1]: Listening on Process Core Dump Socket. node1 # [ 7.668248] systemd[1]: Listening on Credential Encryption/Decryption. node1 # [ 7.671807] systemd[1]: Listening on Factory Reset Management. node1 # [ 7.673495] systemd[1]: Listening on Hostname Service Socket. node1 # [ 7.678664] systemd[1]: Starting Journal Log Access Socket... node1 # [ 7.680972] systemd[1]: Listening on Journal Audit Socket. node1 # [ 7.684878] systemd[1]: Listening on Console Output Muting Service Socket. node1 # [ 7.686846] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. node1 # [ 7.689080] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.691438] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki node1 # [ 7.701480] systemd[1]: Listening on Disk Repartitioning Service Socket. node1 # [ 7.703308] systemd[1]: Listening on udev Control Socket. node1 # [ 7.704885] systemd[1]: Listening on udev Varlink Socket. node1 # [ 7.709469] systemd[1]: Mounting Huge Pages File System... node1 # [ 7.714491] systemd[1]: Mounting POSIX Message Queue File System... node1 # [ 7.721777] systemd[1]: Mounting Kernel Debug File System... node1 # [ 7.729565] systemd[1]: Mounting Kernel Trace File System... node1 # [ 7.737714] systemd[1]: Starting Create List of Static Device Nodes... node1 # [ 7.743876] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio node1 # [ 7.755740] systemd[1]: Starting Load Kernel Module configfs... node1 # [ 7.757779] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm node1 # [ 7.772084] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore node1 # [ 7.780678] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse node1 # [ 7.806542] systemd[1]: Mounting FUSE Control File System... node1 # [ 7.820702] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 node1 # [ 7.839023] systemd[1]: Starting Journal Service... node1 # [ 7.846226] systemd[1]: Starting Load Kernel Modules... node1 # [ 7.860955] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... node1 # [ 7.878513] systemd[1]: Starting Remount Root and Kernel File Systems... node1 # [ 7.888231] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.905545] systemd-journald[287]: Collecting audit messages is enabled. node1 # [ 7.915490] systemd[1]: Starting Coldplug All udev Devices... node1 # [ 7.940771] loop: module loaded node1 # [ 7.947066] systemd[1]: Listening on Journal Log Access Socket. node1 # [ 7.957122] systemd[1]: Mounted Huge Pages File System. node1 # [ 7.711555] systemd[1]: Queued start job for default target Multi-User System. node1 # [ 7.968517] systemd[1]: Started Journal Service. node1 # [ 7.716653] systemd[1]: systemd-journald.service: Deactivated successfully. node1 # [ 7.724989] systemd-modules-load[288]: Inserted module 'loop' node1 # [ 7.984392] EXT4-fs (vda): re-mounted 8745debb-4e7c-47a6-a8c6-6a9758e0080f. node1 # [ 7.734639] systemd[1]: Mounted POSIX Message Queue File System. node1 # [ 7.741565] systemd[1]: Mounted Kernel Debug File System. node1 # [ 7.743565] systemd[1]: Mounted Kernel Trace File System. node1 # [ 7.748682] systemd-modules-load[288]: Inserted module 'tls' node1 # [ 7.752495] systemd[1]: Finished Create List of Static Device Nodes. node1 # [ 7.756855] systemd[1]: modprobe@configfs.service: Deactivated successfully. node1 # [ 7.759790] systemd[1]: Finished Load Kernel Module configfs. node1 # [ 7.765869] systemd[1]: Mounted FUSE Control File System. node1 # [ 7.769832] systemd[1]: Finished Load Kernel Modules. node1 # [ 7.774165] systemd[1]: Finished Remount Root and Kernel File Systems. node1 # [ 7.795115] systemd[1]: Listening on Disk Image Download Service Socket. node1 # [ 7.800769] systemd-oomd[290]: No swap; memory pressure usage will be degraded node1 # [ 7.807154] systemd[1]: Mounting Kernel Configuration File System... node1 # [ 7.813381] systemd[1]: Starting Firewall... node1 # [ 7.821865] systemd[1]: Starting Flush Journal to Persistent Storage... node1 # [ 7.828101] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore node1 # [ 7.841952] systemd[1]: Starting Load/Save OS Random Seed... node1 # [ 7.858256] systemd[1]: Starting Apply Kernel Variables... node1 # [ 7.880888] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... node1 # [ 7.886365] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.892689] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. node1 # [ 8.161441] systemd-journald[287]: Received client request to flush runtime journal. node1 # [ 8.195847] systemd[1]: Finished Load/Save OS Random Seed. node1 # [ 8.198717] systemd[1]: Reached target First Boot Complete. node1 # [ 8.203219] systemd[1]: Mounted Kernel Configuration File System. node1 # [ 8.206747] systemd[1]: Finished Apply Kernel Variables. node1 # [ 8.210623] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. node1 # [ 8.212835] systemd[1]: Starting Create Static Device Nodes in /dev... node1 # [ 8.218153] systemd[1]: Finished Create Static Device Nodes in /dev. node1 # [ 8.219886] systemd[1]: Reached target Preparation for Local File Systems. node1 # [ 8.221650] systemd[1]: Starting Rule-based Manager for Device Events and Files... node1 # [ 8.223687] systemd[1]: Finished Flush Journal to Persistent Storage. node1 # [ 8.332181] systemd-udevd[327]: Using default interface naming scheme 'v261'. node1 # [ 8.365499] systemd[1]: Mounting /run/wrappers... node1 # [ 8.376618] systemd[1]: Finished Coldplug All udev Devices. node1 # [ 8.416737] systemd[1]: Mounted /run/wrappers. node1 # [ 8.418904] systemd[1]: Reached target Local File Systems. node1 # [ 8.423413] systemd[1]: Listening on Boot Loader Control Service Socket. node1 # [ 8.428874] systemd[1]: Starting register-nix-paths.service... node1 # [ 8.434885] systemd[1]: Starting Create SUID/SGID Wrappers... node1 # [ 8.437560] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. node1 # [ 8.448148] systemd[1]: Starting Save Transient machine-id to Disk... node1 # [ 8.458694] systemd[1]: Starting Create System Files and Directories... node1 # [ 8.528484] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. node1 # [ 8.535681] systemd[1]: Finished Save Transient machine-id to Disk. node1 # [ 8.609658] systemd[1]: Started Rule-based Manager for Device Events and Files. node1 # [ 8.631200] systemd[1]: Finished Create System Files and Directories. node1 # [ 8.647089] systemd[1]: Starting Rebuild Journal Catalog... node1 # [ 8.653375] systemd[1]: Starting Record System Boot/Shutdown in UTMP... node1 # [ 8.750989] systemd[1]: Finished Record System Boot/Shutdown in UTMP. node1 # [ 8.820563] systemd[1]: Finished Rebuild Journal Catalog. node1 # [ 8.830480] systemd[1]: Starting Update is Completed... node1 # [ 8.899647] systemd[1]: Finished Update is Completed. node1 # [ 9.174545] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. node1 # [ 9.181468] systemd[1]: Finished Create SUID/SGID Wrappers. node1 # [ 9.205536] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse node1 # [ 9.405126] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. node1 # [ 9.446471] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. node1 # [ 9.510709] (udev-worker)[443]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. node1 # [ 9.521236] (udev-worker)[443]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 9.525364] (udev-worker)[444]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 9.551892] systemd[1]: Finished register-nix-paths.service. node1 # [ 9.555686] systemd[1]: Reached target System Initialization. node1 # [ 9.558613] systemd[1]: Started Discard unused filesystem blocks once a week. node1 # [ 9.561492] systemd[1]: Started Daily Cleanup of Temporary Directories. node1 # [ 9.565287] systemd[1]: Reached target Timer Units. node1 # [ 9.567649] systemd[1]: Listening on D-Bus System Message Bus Socket. node1 # [ 9.570200] systemd[1]: Listening on Nix Daemon Socket. node1 # [ 9.573415] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. node1 # [ 9.575669] systemd[1]: Reached target Socket Units. node1 # [ 9.577640] systemd[1]: Reached target Basic System. node1 # [ 9.582547] systemd[1]: Started backdoor.service. node1 # [ 9.588680] systemd[1]: Starting Import lastlog data into lastlog2 database... node1 # [ 9.606805] systemd[1]: Starting Name Service Cache Daemon (nsncd)... node1 # [ 9.614641] systemd[1]: Starting Post-Boot Actions... node1 # [ 9.631242] systemd[1]: Started Reset console on configuration changes. node1 # [ 9.658125] systemd[1]: Starting resolvconf update... node1 # [ 9.681091] systemd[1]: Finished Firewall. node1 # connecting to host... node1 # [ 9.742874] systemd[1]: Finished Post-Boot Actions. node1: Guest shell says: b'Spawning backdoor root shell...\n' node1 # [ 9.777363] nsncd[507]: Aug 30 07:50:41.819 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" node1: connected to guest root shell node1: (connecting took 10.80 seconds) node1: (finished: waiting for the VM to finish booting, in 10.80 seconds) node1 # [ 9.786819] systemd[1]: Starting D-Bus System Message Bus... node1 # [ 9.790405] systemd[1]: Started Name Service Cache Daemon (nsncd). node1 # [ 9.807843] systemd[1]: Finished Import lastlog data into lastlog2 database. node1 # [ 9.814112] systemd[1]: Reached target Host and Network Name Lookups. node1 # [ 9.815888] systemd[1]: Reached target User and Group Name Lookups. node1 # [ 9.840365] systemd[1]: Starting User Login Management... node1 # [ 9.850268] systemd[1]: Condition check resulted in Virtio network device being skipped. node1 # [ 9.997071] dbus-broker-launch[535]: Looking up NSS user entry for 'systemd-timesync'... node1 # [ 10.027150] dbus-broker-launch[535]: NSS returned no entry for 'systemd-timesync' node1 # [ 10.029174] dbus-broker-launch[535]: Invalid user-name in /nix/store/ch1ia8wxf1qxzd6jxy5yrl02dv64kyhj-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" node1 # [ 10.047574] systemd[1]: Stopped target Host and Network Name Lookups. node1 # [ 10.050835] systemd[1]: Stopping Host and Network Name Lookups... node1 # [ 10.054285] systemd[1]: Stopped target User and Group Name Lookups. node1 # [ 10.058276] systemd[1]: Stopping User and Group Name Lookups... node1 # [ 10.062189] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... node1 # [ 10.069102] systemd[1]: nscd.service: Deactivated successfully. node1 # [ 10.075183] systemd[1]: Stopped Name Service Cache Daemon (nsncd). node1 # [ 10.090226] systemd[1]: Started D-Bus System Message Bus. node1 # [ 10.093944] systemd-logind[542]: New seat seat0. node1 # [ 10.102660] systemd[1]: Started User Login Management. node1 # [ 10.118497] systemd[1]: Starting linger-users.service... node1 # [ 10.126381] systemd[1]: Starting Name Service Cache Daemon (nsncd)... node1 # [ 10.130623] dbus-broker-launch[535]: Ready node1 # [ 10.198642] systemd[1]: Finished resolvconf update. node1 # [ 10.203549] systemd[1]: Reached target Preparation for Network. node1 # [ 10.214980] systemd[1]: Starting DHCP Client... node1 # [ 10.218337] nsncd[598]: Aug 30 07:50:42.267 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" node1 # [ 10.226850] systemd[1]: Starting Address configuration of eth1... node1 # [ 10.241992] systemd[1]: Starting Extra networking commands.... node1 # [ 10.246259] systemd[1]: Started Name Service Cache Daemon (nsncd). node1 # [ 10.257174] systemd[1]: linger-users.service: Deactivated successfully. node1 # [ 10.262610] systemd[1]: Finished linger-users.service. node1 # [ 10.275565] systemd[1]: Reached target Host and Network Name Lookups. node1 # [ 10.278398] systemd[1]: Reached target User and Group Name Lookups. node1 # [ 10.615814] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 node1 # [ 10.389411] network-addresses-eth1-start[619]: adding address 192.168.1.1/24... done node1 # [ 10.649737] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console node1 # [ 10.658422] mousedev: PS/2 mouse device common for all mice node1 # [ 10.417654] network-addresses-eth1-start[619]: adding address 2001:db8:1::1/64... done node1 # [ 10.452874] systemd[1]: Finished Address configuration of eth1. node1 # [ 10.530440] dhcpcd[629]: dhcpcd-10.3.2 starting node1 # [ 10.544669] dhcpcd[682]: dev: loaded udev node1 # [ 10.558389] systemd[1]: Finished Extra networking commands.. node1 # [ 10.561388] systemd[1]: Reached target Network. node1 # [ 10.571756] systemd[1]: Starting Nginx Web Server... node1 # [ 10.586183] systemd[1]: Starting PostgreSQL Server... node1 # [ 10.598517] systemd[1]: Starting Permit User Sessions... node1 # [ 10.772201] systemd[1]: Finished Permit User Sessions. node1 # [ 10.725026] ACPI: button: Power Button [PWRF] node1 # [ 10.834643] 8021q: 802.1Q VLAN Support v1.8 node1 # [ 10.834661] 8021q: adding VLAN 0 to HW filter on device eth1 node1 # [ 10.846481] rtc_cmos 00:04: RTC can wake from S4 node1 # [ 10.928456] rtc_cmos 00:04: registered as rtc0 node1 # [ 10.928589] rtc_cmos 00:04: setting system clock to 2026-08-30T07:50:42 UTC (1788076242) node1 # [ 10.928742] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs node1 # [ 10.930183] systemd-journald[287]: Time jumped backwards, rotating. node1 # [ 10.987022] parport_pc 00:02: reported by Plug and Play ACPI node1 # [ 11.014508] nginx-pre-start[700]: nginx: the configuration file /nix/store/ryifssk7ciqixz7ixc32ksm8hbmqvbvv-nginx.conf syntax is ok node1 # [ 11.020519] nginx-pre-start[700]: nginx: configuration file /nix/store/ryifssk7ciqixz7ixc32ksm8hbmqvbvv-nginx.conf test is successful node1 # [ 11.027817] dhcpcd[682]: eth0: waiting for carrier node1 # [ 11.031558] postgresql-pre-start[703]: The files belonging to this database system will be owned by user "postgres". node1 # [ 11.035421] postgresql-pre-start[703]: This user must also own the server process. node1 # [ 11.038149] dhcpcd[682]: libudev: received NULL device node1 # [ 11.040268] dhcpcd[682]: libudev: received NULL device node1 # [ 11.042322] dhcpcd[682]: eth0: carrier acquired node1 # [ 10.987161] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] node1 # [ 11.076094] Console: switching to colour dummy device 80x25 node1 # [ 11.055126] postgresql-pre-start[703]: The database cluster will be initialized with locale "en_US.UTF-8". node1 # [ 11.057407] postgresql-pre-start[703]: The default database encoding has accordingly been set to "UTF8". node1 # [ 11.059604] postgresql-pre-start[703]: The default text search configuration will be set to "english". node1 # [ 11.061826] postgresql-pre-start[703]: Data page checksums are enabled. node1 # [ 11.064689] postgresql-pre-start[703]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok node1 # [ 11.067084] postgresql-pre-start[703]: creating subdirectories ... ok node1 # [ 11.070122] postgresql-pre-start[703]: selecting dynamic shared memory implementation ... posix node1 # [ 11.073158] dhcpcd[682]: DUID 00:01:00:01:32:26:9d:52:52:54:00:12:34:56 node1 # [ 11.075949] dhcpcd[682]: eth0: IAID 00:12:34:56 node1 # [ 11.078292] dhcpcd[682]: eth0: adding address fe80::5054:ff:fe12:3456 node1 # [ 11.101555] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4 node1 # [ 11.124838] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized node1 # [ 11.130710] cfg80211: Loading compiled-in X.509 certificates for regulatory database node1 # [ 11.167381] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' node1 # [ 11.167500] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' node1 # [ 11.169413] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 node1 # [ 11.211118] postgresql-pre-start[703]: selecting default "max_connections" ... 100 node1 # [ 11.169424] cfg80211: failed to load regulatory.db node1 # [ 11.279834] 8021q: adding VLAN 0 to HW filter on device eth0 node1 # [ 11.388782] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt node1 # [ 11.388941] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD node1 # [ 11.453745] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 node1 # [ 11.454172] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 node1 # [ 11.582053] [drm] Found bochs VGA, ID 0xb0c5. node1 # [ 11.582057] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. node1 # [ 11.585999] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic node1 # [ 11.587411] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 node1 # [ 11.337529] systemd[1]: Started Getty on tty1. node1 # [ 11.339235] systemd[1]: Reached target Login Prompts. node1 # [ 11.344210] postgresql-pre-start[703]: selecting default "shared_buffers" ... 128MB node1 # [ 11.347575] systemd[1]: Started Nginx Web Server. node1 # [ 11.397645] systemd[1]: Starting Virtual Console Setup... node1 # [ 11.734853] Console: switching to colour frame buffer device 160x50 node1 # [ 11.752575] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device node1 # [ 11.914798] kvm_amd: TSC scaling supported node1 # [ 11.915820] kvm_amd: Nested Virtualization enabled node1 # [ 11.917513] kvm_amd: Nested Paging enabled node1 # [ 11.918774] kvm_amd: LBR virtualization supported node1 # [ 11.920468] kvm_amd: Virtual VMLOAD VMSAVE supported node1 # [ 11.927990] kvm_amd: Virtual GIF supported node1 # [ 11.931289] kvm_amd: Virtual NMI enabled node1 # [ 11.780292] systemd-logind[542]: Watching system buttons on /dev/input/event2 (Power Button) node1 # [ 11.784884] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. node1 # [ 11.794438] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 11.798538] systemd[1]: Stopped Virtual Console Setup. node1 # [ 11.804134] systemd-logind[542]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) node1 # [ 11.814944] systemd[1]: Starting Virtual Console Setup... node1 # [ 12.143896] ppdev: user-space parallel port driver node1 # [ 12.170078] EDAC MC: Ver: 3.0.0 node1 # [ 12.207945] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) node1 # [ 11.969528] systemd-logind[542]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) node1 # [ 12.243236] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) node1 # [ 12.046686] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 12.051120] systemd[1]: Stopped Virtual Console Setup. node1 # [ 12.066330] systemd[1]: Starting Virtual Console Setup... node1 # [ 12.428149] systemd-vconsole-setup[757]: Configuration of first virtual console was skipped, ignoring remaining ones. node1 # [ 12.434821] systemd[1]: Finished Virtual Console Setup. node1 # [ 12.517322] dhcpcd[682]: eth0: soliciting a DHCP lease node1 # [ 12.793192] NET: Registered PF_PACKET protocol family node1 # [ 12.547220] dhcpcd[682]: eth0: offered 10.0.2.15 from 10.0.2.2 node1 # [ 12.550271] dhcpcd[682]: eth0: probing address 10.0.2.15/24 node1 # [ 13.123914] dhcpcd[682]: eth0: soliciting an IPv6 router node1 # [ 13.126121] dhcpcd[682]: eth0: Router Advertisement from fe80::2 node1 # [ 13.127849] dhcpcd[682]: eth0: adding address fec0::5054:ff:fe12:3456/64 node1 # [ 13.129640] dhcpcd[682]: eth0: adding route to fec0::/64 node1 # [ 13.131266] dhcpcd[682]: eth0: adding default route via fe80::2 node1 # [ 14.173550] postgresql-pre-start[703]: selecting default time zone ... UTC node1 # [ 14.178756] postgresql-pre-start[703]: creating configuration files ... ok node1 # [ 14.431580] postgresql-pre-start[703]: running bootstrap script ... ok node1 # [ 15.104207] postgresql-pre-start[703]: performing post-bootstrap initialization ... ok node1 # [ 15.304227] postgresql-pre-start[703]: syncing data to disk ... ok node1 # [ 15.305890] postgresql-pre-start[703]: initdb: warning: enabling "trust" authentication for local connections node1 # [ 15.308202] postgresql-pre-start[703]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. node1 # [ 15.311736] postgresql-pre-start[703]: Success. You can now start the database server using: node1 # [ 15.313774] postgresql-pre-start[703]: pg_ctl -D /var/lib/postgresql/18 -l logfile start node1 # [ 15.448945] postgres[800]: [800] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit node1 # [ 15.464259] postgres[800]: [800] LOG: listening on IPv6 address "::1", port 5432 node1 # [ 15.466311] postgres[800]: [800] LOG: listening on IPv4 address "127.0.0.1", port 5432 node1 # [ 15.468904] postgres[800]: [800] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" node1 # [ 15.485629] postgres[809]: [809] LOG: database system was shut down at 2026-08-30 07:50:46 GMT node1 # [ 15.493350] postgres[800]: [800] LOG: database system is ready to accept connections node1 # [ 15.501352] systemd[1]: Started PostgreSQL Server. node1 # [ 15.508442] systemd[1]: Starting PostgreSQL Setup Scripts... node1 # [ 15.726806] postgresql-setup-start[820]: CREATE DATABASE node1 # [ 15.806623] postgresql-setup-start[829]: CREATE ROLE node1 # [ 15.836734] postgresql-setup-start[834]: ALTER DATABASE node1 # [ 15.845120] systemd[1]: Finished PostgreSQL Setup Scripts. node1 # [ 15.849900] systemd[1]: Reached target PostgreSQL. node1 # [ 15.854652] systemd[1]: Starting Buildbot Continuous Integration Server.... node1 # [ 15.911637] buildbot-master-pre-start[841]: mkdir: created directory '/var/lib/buildbot/master' node1 # [ 17.188907] dhcpcd[682]: eth0: leased 10.0.2.15 for 86400 seconds node1 # [ 17.191237] dhcpcd[682]: eth0: adding route to 10.0.2.0/24 node1 # [ 17.192799] dhcpcd[682]: eth0: adding default route via 10.0.2.2 node1 # [ 17.347455] systemd[1]: Started DHCP Client. node1 # [ 22.388859] buildbot-master-pre-start[843]: updating existing installation node1 # [ 22.390734] buildbot-master-pre-start[843]: not touching existing buildbot.tac node1 # [ 22.394170] buildbot-master-pre-start[843]: creating buildbot.tac.new instead node1 # [ 22.395901] buildbot-master-pre-start[843]: creating /var/lib/buildbot/master/master.cfg.sample node1 # [ 22.397941] buildbot-master-pre-start[843]: creating database (postgresql://@/buildbot) node1 # [ 22.399894] buildbot-master-pre-start[843]: buildmaster configured in /var/lib/buildbot/master node1 # [ 22.621058] systemd[1]: Started Buildbot Continuous Integration Server.. node1 # [ 22.625280] systemd[1]: Reached target Multi-User System. node1 # [ 22.627284] systemd[1]: Startup finished in 1.070s (kernel) + 4.428s (initrd) + 17.128s (userspace) = 22.626s. node1: (finished: waiting for unit buildbot-master, in 24.23 seconds) ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 node1: waiting for success: curl --fail -s --head localhost:8010 ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 node1 # [ 26.205557] twistd[930]: 2026-08-30T07:50:55+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... node1 # [ 26.208635] twistd[930]: 2026-08-30T07:50:58+0000 [-] Loaded. node1 # [ 26.210303] twistd[930]: 2026-08-30T07:50:58+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up. node1 # [ 26.214372] twistd[930]: 2026-08-30T07:50:58+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. node1 # [ 26.217545] twistd[930]: 2026-08-30T07:50:58+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 node1 # [ 26.231194] twistd[930]: 2026-08-30T07:50:58+0000 [-] Loading configuration from '/nix/store/s7kjf0cxgxilypbrryg07ingrdlh6096-master.cfg' node1 # [ 27.336465] twistd[930]: 2026-08-30T07:50:59+0000 [buildbot_nix.github_projects#info] ~project-id-map~ is not present, GitHub project reload will follow. node1 # [ 27.348102] twistd[930]: 2026-08-30T07:50:59+0000 [-] Setting up database with URL 'postgresql://@/buildbot' node1 # [ 27.453275] twistd[930]: 2026-08-30T07:50:59+0000 [-] adding 2 new builders, removing 0 node1 # [ 27.481131] twistd[930]: 2026-08-30T07:50:59+0000 [-] adding 4 new services, removing 0 node1 # [ 27.640685] twistd[930]: 2026-08-30T07:50:59+0000 [-] adding 4 new schedulers, removing 0 node1 # [ 27.668926] twistd[930]: 2026-08-30T07:50:59+0000 [-] PeriodicWithStartup scheduler : missed scheduled build time - building immediately node1 # [ 27.727956] twistd[930]: 2026-08-30T07:50:59+0000 [-] BuildbotSite starting on 8010 node1 # [ 27.730930] twistd[930]: 2026-08-30T07:50:59+0000 [buildbot.www.service.BuildbotSite#info] Starting factory node1 # [ 27.734288] twistd[930]: 2026-08-30T07:50:59+0000 [-] adding 17 new workers, removing 0 node1 # [ 27.743226] twistd[930]: 2026-08-30T07:50:59+0000 [-] added buildset 1 to database node1 # [ 27.763105] twistd[930]: 2026-08-30T07:50:59+0000 [-] Starting Worker -- version: 2026.08.30 node1 # [ 27.765197] twistd[930]: 2026-08-30T07:50:59+0000 [-] recording hostname in twistd.hostname node1 # [ 27.767175] twistd[930]: 2026-08-30T07:50:59+0000 [-] message from master: attached node1 # [ 27.770905] twistd[930]: 2026-08-30T07:50:59+0000 [-] Got workerinfo from '__Janitor' node1 # [ 27.780097] twistd[930]: 2026-08-30T07:50:59+0000 [-] bot attached node1 # [ 27.781688] twistd[930]: 2026-08-30T07:50:59+0000 [-] Worker __Janitor attached to __Janitor node1 # [ 27.783647] twistd[930]: 2026-08-30T07:50:59+0000 [-] message from master: attached node1 # [ 27.813126] twistd[930]: 2026-08-30T07:50:59+0000 [-] PBServerFactory starting on 9989 node1 # [ 27.815325] twistd[930]: 2026-08-30T07:50:59+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory node1 # [ 27.960944] twistd[930]: 2026-08-30T07:50:59+0000 [-] BuildMaster is running node1: (finished: waiting for success: curl --fail -s --head localhost:8010, in 5.50 seconds) (finished: run the VM test script, in 29.94 seconds) test script finished in 29.99s cleanup kill QemuMachine (pid 46) node1 # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14) (finished: cleanup, in 0.23 seconds) additionally exposed symbols: node1, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh