vm-test-run-scheduled-effects
checks.x86_64-linux.scheduled-effects
· build #60
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 45)12buildbot # Formatting '/build/vm-state-buildbot/tmp.E2GWuymScM', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 189d303a-aef2-4373-ab06-d4dfc511bc8417buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:02.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:08.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... ok41buildbot # [ 0.000000] Linux version 6.18.48 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Aug 28 06:22:54 UTC 202642buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/mawdhqxwc9zc90fma0asx19g30w75a2l-nixos-system-buildbot-test/init regInfo=/nix/store/fkiqd2h15wvlv7lv2d87l93fr6rw50bw-closure-info/registration console=ttyS0,115200n8 console=tty043buildbot # [ 0.000000] BIOS-provided physical RAM map:44buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable45buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved47buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable48buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved51buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved52buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved53buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved54buildbot # [ 0.000000] NX (Execute Disable) protection: active55buildbot # [ 0.000000] APIC: Static calls initialized56buildbot # [ 0.000000] SMBIOS 2.8 present.57buildbot # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201458buildbot # [ 0.000000] DMI: Memory slots populated: 1/159buildbot # [ 0.000000] Hypervisor detected: KVM60buildbot # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000061buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0062buildbot # [ 0.000000] kvm-clock: using sched offset of 571169640 cycles63buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns64buildbot # [ 0.000005] tsc: Detected 2400.010 MHz processor65buildbot # [ 0.000813] last_pfn = 0x3ffd8 max_arch_pfn = 0x1000000000066buildbot # [ 0.000850] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs67buildbot # [ 0.000853] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT68buildbot # [ 0.002768] found SMP MP-table at [mem 0x000f5450-0x000f545f]69buildbot # [ 0.002779] Using GB pages for direct mapping70buildbot # [ 0.002833] RAMDISK: [mem 0x3e369000-0x3ffcffff]71buildbot # [ 0.002840] ACPI: Early table checksum verification disabled72buildbot # [ 0.002842] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )73buildbot # [ 0.002846] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)74buildbot # [ 0.002850] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002857] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001)76buildbot # [ 0.002859] ACPI: FACS 0x000000003FFE0000 00004077buildbot # [ 0.002860] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)78buildbot # [ 0.002862] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)79buildbot # [ 0.002864] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)80buildbot # [ 0.002865] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)81buildbot # [ 0.002866] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d]82buildbot # [ 0.002867] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219]83buildbot # [ 0.002868] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]84buildbot # [ 0.002868] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385]85buildbot # [ 0.002869] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd]86buildbot # [ 0.002869] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9]87buildbot # [ 0.002870] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421]88buildbot # [ 0.003350] No NUMA configuration found89buildbot # [ 0.003351] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff]90buildbot # [ 0.003354] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff]91buildbot # [ 0.006000] Zone ranges:92buildbot # [ 0.006001] DMA [mem 0x0000000000001000-0x0000000000ffffff]93buildbot # [ 0.006002] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff]94buildbot # [ 0.006003] Normal empty95buildbot # [ 0.006004] Device empty96buildbot # [ 0.006005] Movable zone start for each node97buildbot # [ 0.006006] Early memory node ranges98buildbot # [ 0.006006] node 0: [mem 0x0000000000001000-0x000000000009efff]99buildbot # [ 0.006007] node 0: [mem 0x0000000000100000-0x000000003ffd7fff]100buildbot # [ 0.006008] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]101buildbot # [ 0.006027] On node 0, zone DMA: 1 pages in unavailable ranges102buildbot # [ 0.006309] On node 0, zone DMA: 97 pages in unavailable ranges103buildbot # [ 0.025037] On node 0, zone DMA32: 40 pages in unavailable ranges104buildbot # [ 0.026130] ACPI: PM-Timer IO Port: 0x608105buildbot # [ 0.026144] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])106buildbot # [ 0.026182] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23107buildbot # [ 0.026185] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)108buildbot # [ 0.026186] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)109buildbot # [ 0.026188] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)110buildbot # [ 0.026189] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)111buildbot # [ 0.026189] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)112buildbot # [ 0.026191] ACPI: Using ACPI (MADT) for SMP configuration information113buildbot # [ 0.026193] ACPI: HPET id: 0x8086a201 base: 0xfed00000114buildbot # [ 0.026197] TSC deadline timer available115buildbot # [ 0.026201] CPU topo: Max. logical packages: 1116buildbot # [ 0.026202] CPU topo: Max. logical dies: 1117buildbot # [ 0.026202] CPU topo: Max. dies per package: 1118buildbot # [ 0.026205] CPU topo: Max. threads per core: 1119buildbot # [ 0.026206] CPU topo: Num. cores per package: 1120buildbot # [ 0.026206] CPU topo: Num. threads per package: 1121buildbot # [ 0.026206] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs122buildbot # [ 0.026224] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()123buildbot # [ 0.026258] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]124buildbot # [ 0.026260] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]125buildbot # [ 0.026261] [mem 0x40000000-0xafffffff] available for PCI devices126buildbot # [ 0.026263] Booting paravirtualized kernel on KVM127buildbot # [ 0.026265] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns128buildbot # [ 0.030715] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1129buildbot # [ 0.033033] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152130buildbot # [ 0.033080] kvm-guest: PV spinlocks disabled, single CPU131buildbot # [ 0.033082] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/mawdhqxwc9zc90fma0asx19g30w75a2l-nixos-system-buildbot-test/init regInfo=/nix/store/fkiqd2h15wvlv7lv2d87l93fr6rw50bw-closure-info/registration console=ttyS0,115200n8 console=tty0132buildbot # [ 0.033177] Unknown kernel command line parameters "regInfo=/nix/store/fkiqd2h15wvlv7lv2d87l93fr6rw50bw-closure-info/registration", will be passed to user space.133buildbot # [ 0.033189] random: crng init done134buildbot # [ 0.033190] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes135buildbot # [ 0.034328] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)136buildbot # [ 0.034340] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)137buildbot # [ 0.034371] Fallback order for Node 0: 0138buildbot # [ 0.034374] Built 1 zonelists, mobility grouping on. Total pages: 262006139buildbot # [ 0.034375] Policy zone: DMA32140buildbot # [ 0.036965] mem auto-init: stack:all(zero), heap alloc:on, heap free:off141buildbot # [ 0.039407] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1142buildbot # [ 0.042015] allocated 2097152 bytes of page_ext143buildbot # [ 0.051616] ftrace: allocating 48733 entries in 192 pages144buildbot # [ 0.051618] ftrace: allocated 192 pages with 2 groups145buildbot # [ 0.052470] Dynamic Preempt: lazy146buildbot # [ 0.052649] rcu: Preemptible hierarchical RCU implementation.147buildbot # [ 0.052650] rcu: RCU event tracing is enabled.148buildbot # [ 0.052650] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.149buildbot # [ 0.052652] Trampoline variant of Tasks RCU enabled.150buildbot # [ 0.052652] Rude variant of Tasks RCU enabled.151buildbot # [ 0.052652] Tracing variant of Tasks RCU enabled.152buildbot # [ 0.052653] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.153buildbot # [ 0.052654] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1154buildbot # [ 0.052670] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.155buildbot # [ 0.052671] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.156buildbot # [ 0.052672] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.157buildbot # [ 0.057056] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16158buildbot # [ 0.057349] rcu: srcu_init: Setting srcu_struct sizes based on contention.159buildbot # [ 0.057356] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns160buildbot # [ 0.057456] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)161buildbot # [ 0.064678] Console: colour VGA+ 80x25162buildbot # [ 0.064682] printk: legacy console [tty0] enabled163buildbot # [ 0.107230] printk: legacy console [ttyS0] enabled164buildbot # [ 0.301554] ACPI: Core revision 20250807165buildbot # [ 0.303091] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns166buildbot # [ 0.305832] APIC: Switch to symmetric I/O mode setup167buildbot # [ 0.307561] x2apic enabled168buildbot # [ 0.308782] APIC: Switched APIC routing to: physical x2apic169buildbot # [ 0.311754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1170buildbot # [ 0.313589] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns171buildbot # [ 0.316642] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400010)172buildbot # [ 0.318769] x86/cpu: User Mode Instruction Prevention (UMIP) activated173buildbot # [ 0.319814] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127174buildbot # [ 0.320640] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0175buildbot # [ 0.321644] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto176buildbot # [ 0.322641] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl177buildbot # [ 0.323641] Transient Scheduler Attacks: Mitigation: Clear CPU buffers178buildbot # [ 0.325640] Spectre V2 : Mitigation: Enhanced / Automatic IBRS179buildbot # [ 0.327641] Speculative Return Stack Overflow: Mitigation: Safe RET180buildbot # [ 0.328640] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization181buildbot # [ 0.330650] Spectre V2 : Enabling IBPB for BPF182buildbot # [ 0.331642] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier183buildbot # [ 0.333641] active return thunk: srso_alias_return_thunk184buildbot # [ 0.334669] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'185buildbot # [ 0.336640] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'186buildbot # [ 0.337640] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'187buildbot # [ 0.338640] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'188buildbot # [ 0.340640] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'189buildbot # [ 0.342640] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'190buildbot # [ 0.343640] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'191buildbot # [ 0.345640] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'192buildbot # [ 0.347640] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'193buildbot # [ 0.348641] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256194buildbot # [ 0.350640] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64195buildbot # [ 0.351640] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512196buildbot # [ 0.352640] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024197buildbot # [ 0.353640] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8198buildbot # [ 0.355641] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16199buildbot # [ 0.357640] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24200buildbot # [ 0.358640] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.201buildbot # [ 0.393011] Freeing SMP alternatives memory: 44K202buildbot # [ 0.393643] pid_max: default: 32768 minimum: 301203buildbot # [ 0.395732] LSM: initializing lsm=capability,landlock,yama,bpf,ima204buildbot # [ 0.396740] landlock: Up and running.205buildbot # [ 0.397640] Yama: becoming mindful.206buildbot # [ 0.398854] LSM support for eBPF active207buildbot # [ 0.400735] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)208buildbot # [ 0.401665] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)209buildbot # [ 0.404355] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)210buildbot # [ 0.405241] Performance Events: Fam17h+ core perfctr, AMD PMU driver.211buildbot # [ 0.405646] ... version: 2212buildbot # [ 0.406642] ... bit width: 48213buildbot # [ 0.407655] ... generic counters: 6214buildbot # [ 0.408642] ... generic bitmap: 000000000000003f215buildbot # [ 0.409642] ... fixed-purpose counters: 0216buildbot # [ 0.410642] ... fixed-purpose bitmap: 0000000000000000217buildbot # [ 0.411642] ... value mask: 0000ffffffffffff218buildbot # [ 0.412642] ... max period: 00007fffffffffff219buildbot # [ 0.413642] ... global_ctrl mask: 000000000000003f220buildbot # [ 0.414758] signal: max sigframe size: 3376221buildbot # [ 0.415762] rcu: Hierarchical SRCU implementation.222buildbot # [ 0.416646] rcu: Max phase no-delay instances is 400.223buildbot # [ 0.422709] smp: Bringing up secondary CPUs ...224buildbot # [ 0.423651] smp: Brought up 1 node, 1 CPU225buildbot # [ 0.424649] smpboot: Total of 1 processors activated (4800.02 BogoMIPS)226buildbot # [ 0.425871] Memory: 941048K/1048024K available (17215K kernel code, 2726K rwdata, 13580K rodata, 3644K init, 2988K bss, 99608K reserved, 0K cma-reserved)227buildbot # [ 0.426877] devtmpfs: initialized228buildbot # [ 0.427833] x86/mm: Memory block size: 128MB229buildbot # [ 0.429616] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)230buildbot # [ 0.430686] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).231buildbot # [ 0.431762] pinctrl core: initialized pinctrl subsystem232buildbot # [ 0.433013] PM: RTC time: 07:50:32, date: 2026-08-30233buildbot # [ 0.436727] NET: Registered PF_NETLINK/PF_ROUTE protocol family234buildbot # [ 0.438028] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations235buildbot # [ 0.438663] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations236buildbot # [ 0.439798] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations237buildbot # [ 0.440654] audit: initializing netlink subsys (disabled)238buildbot # [ 0.441928] thermal_sys: Registered thermal governor 'fair_share'239buildbot # [ 0.441930] thermal_sys: Registered thermal governor 'bang_bang'240buildbot # [ 0.442643] thermal_sys: Registered thermal governor 'step_wise'241buildbot # [ 0.443646] audit: type=2000 audit(1788076232.761:1): state=initialized audit_enabled=0 res=1242buildbot # [ 0.445645] thermal_sys: Registered thermal governor 'user_space'243buildbot # [ 0.445647] thermal_sys: Registered thermal governor 'power_allocator'244buildbot # [ 0.446662] cpuidle: using governor menu245buildbot # [ 0.449826] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5246buildbot # [ 0.450938] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]247buildbot # [ 0.451645] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry248buildbot # [ 0.452655] PCI: Using configuration type 1 for base access249buildbot # [ 0.453876] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.250buildbot # [ 0.460936] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages251buildbot # [ 0.461643] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page252buildbot # [ 0.466641] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages253buildbot # [ 0.467643] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page254buildbot # [ 0.476251] ACPI: Added _OSI(Module Device)255buildbot # [ 0.476643] ACPI: Added _OSI(Processor Device)256buildbot # [ 0.477642] ACPI: Added _OSI(Processor Aggregator Device)257buildbot # [ 0.487205] ACPI: 1 ACPI AML tables successfully acquired and loaded258buildbot # [ 0.491069] ACPI: Interpreter enabled259buildbot # [ 0.491659] ACPI: PM: (supports S0 S3 S4 S5)260buildbot # [ 0.492644] ACPI: Using IOAPIC for interrupt routing261buildbot # [ 0.493692] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug262buildbot # [ 0.496641] PCI: Using E820 reservations for host bridge windows263buildbot # [ 0.497797] ACPI: Enabled 2 GPEs in block 00 to 3F264buildbot # [ 0.507480] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])265buildbot # [ 0.508649] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]266buildbot # [ 0.509728] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]267buildbot # [ 0.510810] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]268buildbot # [ 0.512325] PCI host bridge to bus 0000:00269buildbot # [ 0.512649] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]270buildbot # [ 0.513643] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]271buildbot # [ 0.514643] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]272buildbot # [ 0.515643] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]273buildbot # [ 0.516644] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]274buildbot # [ 0.517643] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]275buildbot # [ 0.518643] pci_bus 0000:00: root bus resource [bus 00-ff]276buildbot # [ 0.519828] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint277buildbot # [ 0.521564] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint278buildbot # [ 0.524743] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]279buildbot # [ 0.525670] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]280buildbot # [ 0.526695] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]281buildbot # [ 0.527865] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]282buildbot # [ 0.530636] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint283buildbot # [ 0.533680] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f]284buildbot # [ 0.534657] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]285buildbot # [ 0.535695] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]286buildbot # [ 0.536656] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]287buildbot # [ 0.538873] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint288buildbot # [ 0.541678] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f]289buildbot # [ 0.542657] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]290buildbot # [ 0.543696] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]291buildbot # [ 0.545850] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint292buildbot # [ 0.548679] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf]293buildbot # [ 0.549657] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]294buildbot # [ 0.550694] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]295buildbot # [ 0.552900] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint296buildbot # [ 0.555681] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f]297buildbot # [ 0.556664] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]298buildbot # [ 0.557694] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]299buildbot # [ 0.559838] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint300buildbot # [ 0.562385] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf]301buildbot # [ 0.563657] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]302buildbot # [ 0.564705] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]303buildbot # [ 0.566875] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint304buildbot # [ 0.569491] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f]305buildbot # [ 0.570662] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]306buildbot # [ 0.571694] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]307buildbot # [ 0.574150] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint308buildbot # [ 0.576419] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df]309buildbot # [ 0.577656] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]310buildbot # [ 0.578694] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]311buildbot # [ 0.579656] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref]312buildbot # [ 0.581864] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint313buildbot # [ 0.583669] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]314buildbot # [ 0.584695] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]315buildbot # [ 0.586864] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint316buildbot # [ 0.589525] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff]317buildbot # [ 0.590657] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]318buildbot # [ 0.591695] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]319buildbot # [ 0.593857] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint320buildbot # [ 0.596281] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff]321buildbot # [ 0.596657] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]322buildbot # [ 0.597694] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]323buildbot # [ 0.599895] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint324buildbot # [ 0.603264] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f]325buildbot # [ 0.604030] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint326buildbot # [ 0.605707] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f]327buildbot # [ 0.607019] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint328buildbot # [ 0.608731] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f]329buildbot # [ 0.610065] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint330buildbot # [ 0.611656] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]331buildbot # [ 0.613090] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint332buildbot # [ 0.615550] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO333buildbot # [ 0.617112] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint334buildbot # [ 0.619281] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f]335buildbot # [ 0.620656] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]336buildbot # [ 0.622295] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint337buildbot # [ 0.624668] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]338buildbot # [ 0.632065] ACPI: PCI: Interrupt link LNKA configured for IRQ 10339buildbot # [ 0.632806] ACPI: PCI: Interrupt link LNKB configured for IRQ 10340buildbot # [ 0.633802] ACPI: PCI: Interrupt link LNKC configured for IRQ 11341buildbot # [ 0.634802] ACPI: PCI: Interrupt link LNKD configured for IRQ 11342buildbot # [ 0.635808] ACPI: PCI: Interrupt link LNKE configured for IRQ 10343buildbot # [ 0.636794] ACPI: PCI: Interrupt link LNKF configured for IRQ 10344buildbot # [ 0.637799] ACPI: PCI: Interrupt link LNKG configured for IRQ 11345buildbot # [ 0.638819] ACPI: PCI: Interrupt link LNKH configured for IRQ 11346buildbot # [ 0.639725] ACPI: PCI: Interrupt link GSIA configured for IRQ 16347buildbot # [ 0.640668] ACPI: PCI: Interrupt link GSIB configured for IRQ 17348buildbot # [ 0.641667] ACPI: PCI: Interrupt link GSIC configured for IRQ 18349buildbot # [ 0.642667] ACPI: PCI: Interrupt link GSID configured for IRQ 19350buildbot # [ 0.643660] ACPI: PCI: Interrupt link GSIE configured for IRQ 20351buildbot # [ 0.644660] ACPI: PCI: Interrupt link GSIF configured for IRQ 21352buildbot # [ 0.645660] ACPI: PCI: Interrupt link GSIG configured for IRQ 22353buildbot # [ 0.646665] ACPI: PCI: Interrupt link GSIH configured for IRQ 23354buildbot # [ 0.648780] iommu: Default domain type: Translated355buildbot # [ 0.649652] iommu: DMA domain TLB invalidation policy: lazy mode356buildbot # [ 0.650919] ACPI: bus type USB registered357buildbot # [ 0.651712] usbcore: registered new interface driver usbfs358buildbot # [ 0.652665] usbcore: registered new interface driver hub359buildbot # [ 0.653676] usbcore: registered new device driver usb360buildbot # [ 0.655609] NetLabel: Initializing361buildbot # [ 0.656478] NetLabel: domain hash size = 128362buildbot # [ 0.657642] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO363buildbot # [ 0.658711] NetLabel: unlabeled traffic allowed by default364buildbot # [ 0.659655] PCI: Using ACPI for IRQ routing365buildbot # [ 0.765634] pci 0000:00:01.0: vgaarb: setting as boot VGA device366buildbot # [ 0.765637] pci 0000:00:01.0: vgaarb: bridge control possible367buildbot # [ 0.765637] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none368buildbot # [ 0.765646] vgaarb: loaded369buildbot # [ 0.766792] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0370buildbot # [ 0.767644] hpet0: 3 comparators, 64-bit 100.000000 MHz counter371buildbot # [ 0.772746] clocksource: Switched to clocksource kvm-clock372buildbot # [ 0.777071] VFS: Disk quotas dquot_6.6.0373buildbot # [ 0.778339] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)374buildbot # [ 0.780585] pnp: PnP ACPI init375buildbot # [ 0.781869] ACPI: IRQ 4 override to edge(!), high(!)376buildbot # [ 0.783535] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved377buildbot # [ 0.786120] pnp: PnP ACPI: found 6 devices378buildbot # [ 0.794356] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns379buildbot # [ 0.796926] clocksource: Switched to clocksource acpi_pm380buildbot # [ 0.798638] NET: Registered PF_INET protocol family381buildbot # [ 0.800404] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)382buildbot # [ 0.818831] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)383buildbot # [ 0.821438] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)384buildbot # [ 0.823717] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)385buildbot # [ 0.826042] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)386buildbot # [ 0.828220] TCP: Hash tables configured (established 8192 bind 8192)387buildbot # [ 0.830174] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)388buildbot # [ 0.832416] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)389buildbot # [ 0.834390] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)390buildbot # [ 0.836512] NET: Registered PF_UNIX/PF_LOCAL protocol family391buildbot # [ 0.838231] NET: Registered PF_XDP protocol family392buildbot # [ 0.839775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]393buildbot # [ 0.841569] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]394buildbot # [ 0.843376] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]395buildbot # [ 0.845344] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]396buildbot # [ 0.847316] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]397buildbot # [ 0.849321] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]398buildbot # [ 0.851999] ACPI: \_SB_.GSIA: Enabled at IRQ 16399buildbot # [ 0.854784] ACPI: \_SB_.GSIB: Enabled at IRQ 17400buildbot # [ 0.857536] ACPI: \_SB_.GSIC: Enabled at IRQ 18401buildbot # [ 0.860262] ACPI: \_SB_.GSID: Enabled at IRQ 19402buildbot # [ 0.862761] PCI: CLS 0 bytes, default 64403buildbot # [ 0.864232] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns404buildbot # [ 0.867228] Trying to unpack rootfs image as initramfs...405buildbot # [ 0.912642] Initialise system trusted keyrings406buildbot # [ 0.917379] workingset: timestamp_bits=40 max_order=18 bucket_order=0407buildbot # [ 0.942722] Key type asymmetric registered408buildbot # [ 0.944029] Asymmetric key parser 'x509' registered409buildbot # [ 0.949379] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)410buildbot # [ 0.954373] io scheduler mq-deadline registered411buildbot # [ 0.957341] io scheduler kyber registered412buildbot # [ 0.961903] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled413buildbot # [ 0.964145] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A414buildbot # [ 0.971475] Linux agpgart interface v0.103415buildbot # [ 0.972844] ACPI: bus type drm_connector registered416buildbot # [ 0.978871] usbcore: registered new interface driver usbserial_generic417buildbot # [ 0.980801] usbserial: USB Serial support registered for generic418buildbot # [ 0.985329] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.419buildbot # [ 0.985329] Please enable it if your BIOS has the CPPC option.420buildbot # [ 0.989231] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled421buildbot # [ 0.997498] drop_monitor: Initializing network drop monitor service422buildbot # [ 0.999516] NET: Registered PF_INET6 protocol family423buildbot # [ 1.005847] Segment Routing with IPv6424buildbot # [ 1.009353] In-situ OAM (IOAM) with IPv6425buildbot # [ 1.011610] IPI shorthand broadcast: enabled426buildbot # [ 1.020420] sched_clock: Marking stable (768029759, 252282129)->(1225797362, -205485474)427buildbot # [ 1.028573] registered taskstats version 1428buildbot # [ 1.030129] Loading compiled-in X.509 certificates429buildbot # [ 1.050333] Demotion targets for Node 0: null430buildbot # [ 1.053379] Key type .fscrypt registered431buildbot # [ 1.057320] Key type fscrypt-provisioning registered432buildbot # [ 1.058944] ima: No TPM chip found, activating TPM-bypass!433buildbot # [ 1.062331] ima: Allocated hash algorithm: sha1434buildbot # [ 1.063767] ima: No architecture policies found435buildbot # [ 1.069502] PM: Magic number: 6:795:825436buildbot # [ 1.073729] RAS: Correctable Errors collector initialized.437buildbot # [ 1.083186] clk: Disabling unused clocks438buildbot # [ 1.086346] PM: genpd: Disabling unused power domains439buildbot # [ 1.234639] Freeing initrd memory: 29084K440buildbot # [ 1.238603] Freeing unused decrypted memory: 2028K441buildbot # [ 1.242073] Freeing unused kernel image (initmem) memory: 3644K442buildbot # [ 1.243991] Write protecting the kernel read-only data: 32768k443buildbot # [ 1.246791] Freeing unused kernel image (text/rodata gap) memory: 1216K444buildbot # [ 1.249213] Freeing unused kernel image (rodata/data gap) memory: 756K445buildbot # [ 1.302443] x86/mm: Checked W+X mappings: passed, no W+X pages found.446buildbot # [ 1.304393] Run /init as init process447buildbot # [ 1.315746] systemd[1]: Inserted module 'autofs4'448buildbot # [ 1.333413] fuse: init (API version 7.45)449buildbot # [ 1.340053] ACPI: \_SB_.GSIG: Enabled at IRQ 22450buildbot # [ 1.343901] ACPI: \_SB_.GSIH: Enabled at IRQ 23451buildbot # [ 1.348615] ACPI: \_SB_.GSIE: Enabled at IRQ 20452buildbot # [ 1.352203] ACPI: \_SB_.GSIF: Enabled at IRQ 21453buildbot # [ 1.387246] systemd[1]: Successfully made /usr/ read-only.454buildbot # [ 1.727597] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)455buildbot # [ 1.749473] systemd[1]: Detected virtualization kvm.456buildbot # [ 1.753420] systemd[1]: Detected architecture x86-64.457buildbot # [ 1.757402] systemd[1]: Running in initrd.458buildbot # [ 1.761674] systemd[1]: Initializing machine ID from random generator.459buildbot # [ 1.766829] systemd[1]: Hostname set to <buildbot>.460buildbot # [ 1.990979] systemd[1]: bpf-restrict-fs: LSM BPF program attached461buildbot # [ 2.051036] systemd[1]: Queued start job for default target Initrd Default Target.462buildbot # [ 2.056945] systemd[1]: Created slice Slice /system/modprobe.463buildbot # [ 2.059017] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.464buildbot # [ 2.061532] systemd[1]: Expecting device /dev/disk/by-label/nixos...465buildbot # [ 2.063523] systemd[1]: Reached target Path Units.466buildbot # [ 2.065090] systemd[1]: Reached target Slice Units.467buildbot # [ 2.066742] systemd[1]: Reached target Swaps.468buildbot # [ 2.068190] systemd[1]: Reached target Timer Units.469buildbot # [ 2.069936] systemd[1]: Listening on D-Bus System Message Bus Socket.470buildbot # [ 2.072135] systemd[1]: Listening on Journal Socket (/dev/log).471buildbot # [ 2.074197] systemd[1]: Listening on Journal Sockets.472buildbot # [ 2.076006] systemd[1]: Listening on udev Control Socket.473buildbot # [ 2.077843] systemd[1]: Listening on udev Kernel Socket.474buildbot # [ 2.079566] systemd[1]: Reached target Socket Units.475buildbot # [ 2.094497] systemd[1]: Starting Create List of Static Device Nodes...476buildbot # [ 2.100487] systemd[1]: Starting Load Kernel Module 9pnet_virtio...477buildbot # [ 2.111647] systemd[1]: Starting Load Kernel Module configfs...478buildbot # [ 2.125007] systemd[1]: Starting Journal Service...479buildbot # [ 2.142413] systemd[1]: Starting Load Kernel Modules...480buildbot # [ 2.148456] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os481buildbot # [ 2.153272] netfs: FS-Cache loaded482buildbot # [ 2.159606] systemd[1]: Starting Coldplug All udev Devices...483buildbot # [ 2.173460] 9pnet: Installing 9P2000 support484buildbot # [ 2.185391] systemd[1]: Finished Create List of Static Device Nodes.485buildbot # [ 2.197145] systemd[1]: modprobe@configfs.service: Deactivated successfully.486buildbot # [ 2.201898] systemd-journald[67]: Collecting audit messages is disabled.487buildbot # [ 2.210994] systemd[1]: Finished Load Kernel Module configfs.488buildbot # [ 2.221017] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.489buildbot # [ 2.226686] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.490buildbot # [ 2.233951] systemd[1]: Finished Load Kernel Module 9pnet_virtio.491buildbot # [ 2.240339] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev492buildbot # [ 2.243954] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config493buildbot # [ 2.261540] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...494buildbot # [ 2.284881] systemd[1]: Finished Load Kernel Modules.495buildbot # [ 2.296770] systemd[1]: Starting Apply Kernel Variables...496buildbot # [ 2.315509] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.497buildbot # [ 2.329735] systemd[1]: Starting Create Static Device Nodes in /dev...498buildbot # [ 2.348503] systemd[1]: Finished Apply Kernel Variables.499buildbot # [ 2.370227] systemd[1]: Finished Create Static Device Nodes in /dev.500buildbot # [ 2.376714] systemd[1]: Reached target Preparation for Local File Systems.501buildbot # [ 2.384436] systemd[1]: Reached target Local File Systems.502buildbot # [ 2.392715] systemd[1]: Starting Rule-based Manager for Device Events and Files...503buildbot # [ 2.156059] systemd-modules-load[68]: Inserted module 'dm_mod'[ 2.410599] systemd[1]: Started Journal Service.504buildbot # 505buildbot # [ 2.159953] systemd-modules-load[68]: Inserted module 'virtio_balloon'506buildbot # [ 2.163729] systemd-modules-load[68]: Inserted module 'virtio_gpu'507buildbot # [ 2.189120] systemd[1]: Starting Create System Files and Directories...508buildbot # [ 2.221290] systemd-udevd[74]: Using default interface naming scheme 'v261'.509buildbot # [ 2.225551] systemd[1]: Finished Create System Files and Directories.510buildbot # [ 2.259344] systemd[1]: Started Rule-based Manager for Device Events and Files.511buildbot # [ 2.306235] systemd[1]: Finished Coldplug All udev Devices.512buildbot # [ 2.309103] systemd[1]: Reached target System Initialization.513buildbot # [ 2.310755] systemd[1]: Reached target Basic System.514buildbot # [ 2.851990] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12515buildbot # [ 2.858145] virtio_blk virtio5: 1/0/0 default/read/poll queues516buildbot # [ 2.886950] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)517buildbot # [ 2.889521] serio: i8042 KBD port at 0x60,0x64 irq 1518buildbot # [ 2.896231] ehci-pci 0000:00:1d.7: EHCI Host Controller519buildbot # [ 2.897855] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1520buildbot # [ 2.903622] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000521buildbot # [ 2.907628] serio: i8042 AUX port at 0x60,0x64 irq 12522buildbot # [ 2.910372] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00523buildbot # [ 2.912739] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18524buildbot # [ 2.914669] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1525buildbot # [ 2.920324] usb usb1: Product: EHCI Host Controller526buildbot # [ 2.923124] usb usb1: Manufacturer: Linux 6.18.48 ehci_hcd527buildbot # [ 2.925263] usb usb1: SerialNumber: 0000:00:1d.7528buildbot # [ 2.926988] hub 1-0:1.0: USB hub found529buildbot # [ 2.928614] hub 1-0:1.0: 6 ports detected530buildbot # [ 2.935414] uhci_hcd 0000:00:1d.0: UHCI Host Controller531buildbot # [ 2.936708] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2532buildbot # [ 2.956959] uhci_hcd 0000:00:1d.0: detected 2 ports533buildbot # [ 2.967608] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200534buildbot # [ 2.979820] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18535buildbot # [ 2.995734] SCSI subsystem initialized536buildbot # [ 2.997642] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1537buildbot # [ 3.010475] usb usb2: Product: UHCI Host Controller538buildbot # [ 3.011733] usb usb2: Manufacturer: Linux 6.18.48 uhci_hcd539buildbot # [ 2.764266] systemd[1]: Starting Virtual Console Setup...540buildbot # [ 2.777258] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line.541buildbot # [ 3.038548] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0542buildbot # [ 3.052637] usb usb2: SerialNumber: 0000:00:1d.0543buildbot # [ 2.806504] (udev-worker)[86]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.544buildbot # [ 2.812099] (udev-worker)[86]: Network interface NamePolicy= disabled on kernel command line.545buildbot # [ 2.816980] systemd-vconsole-setup[98]: Configuration of first virtual console was skipped, ignoring remaining ones.546buildbot # [ 2.822633] systemd[1]: Finished Virtual Console Setup.547buildbot # [ 3.081441] hub 2-0:1.0: USB hub found548buildbot # [ 3.094137] hub 2-0:1.0: 2 ports detected549buildbot # [ 3.099650] uhci_hcd 0000:00:1d.1: UHCI Host Controller550buildbot # [ 3.111713] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3551buildbot # [ 3.118350] uhci_hcd 0000:00:1d.1: detected 2 ports552buildbot # [ 3.122545] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220553buildbot # [ 2.874046] systemd[1]: Found device /dev/disk/by-label/nixos.554buildbot # [ 2.878103] systemd[1]: Reached target Initrd Root Device.555buildbot # [ 2.884148] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...556buildbot # [ 3.139475] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18557buildbot # [ 3.142046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1558buildbot # [ 3.149338] usb usb3: Product: UHCI Host Controller559buildbot # [ 3.158819] usb usb3: Manufacturer: Linux 6.18.48 uhci_hcd560buildbot # [ 3.164033] usb usb3: SerialNumber: 0000:00:1d.1561buildbot # [ 3.166362] usb 1-1: new high-speed USB device number 2 using ehci-pci562buildbot # [ 3.172709] hub 3-0:1.0: USB hub found563buildbot # [ 2.922659] systemd-fsck[107]: nixos: clean, 12/65536 files, 13019/262144 blocks564buildbot # [ 3.178714] hub 3-0:1.0: 2 ports detected565buildbot # [ 2.932122] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.566buildbot # [ 3.188425] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode567buildbot # [ 2.940177] systemd[1]: Mounting /sysroot...568buildbot # [ 3.198320] uhci_hcd 0000:00:1d.2: UHCI Host Controller569buildbot # [ 3.203769] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)570buildbot # [ 3.208015] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4571buildbot # [ 3.212372] ahci 0000:00:1f.2: flags: 64bit ncq only572buildbot # [ 3.215443] uhci_hcd 0000:00:1d.2: detected 2 ports573buildbot # [ 3.222554] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240574buildbot # [ 3.236487] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18575buildbot # [ 3.244944] scsi host0: ahci576buildbot # [ 3.251323] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1577buildbot # [ 3.256099] scsi host1: ahci578buildbot # [ 3.260582] scsi host2: ahci579buildbot # [ 3.268421] scsi host3: ahci580buildbot # [ 3.269526] usb usb4: Product: UHCI Host Controller581buildbot # [ 3.276615] usb usb4: Manufacturer: Linux 6.18.48 uhci_hcd582buildbot # [ 3.280443] scsi host4: ahci583buildbot # [ 3.286422] usb usb4: SerialNumber: 0000:00:1d.2584buildbot # [ 3.293345] scsi host5: ahci585buildbot # [ 3.299369] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1586buildbot # [ 3.301376] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1587buildbot # [ 3.309035] hub 4-0:1.0: USB hub found588buildbot # [ 3.312317] hub 4-0:1.0: 2 ports detected589buildbot # [ 3.315339] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00590buildbot # [ 3.317245] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10591buildbot # [ 3.322320] usb 1-1: Product: QEMU USB Tablet592buildbot # [ 3.324898] usb 1-1: Manufacturer: QEMU593buildbot # [ 3.327544] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1594buildbot # [ 3.340407] EXT4-fs (vda): mounted filesystem 189d303a-aef2-4373-ab06-d4dfc511bc84 r/w with ordered data mode. Quota mode: none.595buildbot # [ 3.345092] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1596buildbot # [ 3.096841] systemd[1]: Mounted /sysroot.597buildbot # [ 3.100732] systemd[1]: Reached target Initrd Root File System.598buildbot # [ 3.106111] systemd[1]: Mounting /sysroot/nix/.ro-store...599buildbot # [ 3.111912] systemd[1]: Mounting /sysroot/nix/.rw-store...600buildbot # [ 3.121100] systemd[1]: Mounting /sysroot/run...601buildbot # [ 3.377473] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1602buildbot # [ 3.133050] systemd[1]: Mounting /sysroot/tmp/shared...603buildbot # [ 3.143254] systemd[1]: Mounting /sysroot/tmp/xchg...604buildbot # [ 3.404359] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1605buildbot # [ 3.155116] systemd[1]: Starting Mountpoints Configured in the Real Root...606buildbot # [ 3.422243] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1607buildbot # [ 3.453544] hid: raw HID events driver (C) Jiri Kosina608buildbot # [ 3.218550] systemd[1]: Mounted /sysroot/nix/.rw-store.609buildbot # [ 3.475405] 9p: Installing v9fs 9p2000 file system support610buildbot # [ 3.225497] systemd-sysroot-fstab-check[134]: /sysroot should be mounted in the initrd, will request daemon-reload.611buildbot # [ 3.229835] systemd[1]: Mounted /sysroot/run.612buildbot # [ 3.235614] systemd[1]: Mounted /sysroot/tmp/shared.613buildbot # [ 3.237881] systemd[1]: Mounted /sysroot/tmp/xchg.614buildbot # [ 3.242231] systemd[1]: Reload requested from client PID 134 ('systemd-sysroot') (unit initrd-parse-etc.service)...615buildbot # [ 3.246150] systemd[1]: Reloading...616buildbot # [ 3.318966] systemd[1]: Reloading finished in 73 ms.617buildbot # [ 3.328797] systemd-sysroot-fstab-check[134]: Requesting initrd-fs.target/start/replace...618buildbot # [ 3.333690] systemd-sysroot-fstab-check[134]: Requesting swap.target/start/replace...619buildbot # [ 3.336224] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio620buildbot # [ 3.341111] systemd[1]: Starting rw-sysroot-nix-store.service...621buildbot # [ 3.342719] systemd[1]: initrd-parse-etc.service: Deactivated successfully.622buildbot # [ 3.347108] systemd[1]: Finished Mountpoints Configured in the Real Root.623buildbot # [ 3.348866] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.624buildbot # [ 3.361529] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.625buildbot # [ 3.364146] systemd[1]: Finished rw-sysroot-nix-store.service.626buildbot # [ 3.742839] ata4: SATA link down (SStatus 0 SControl 300)627buildbot # [ 3.747054] ata1: SATA link down (SStatus 0 SControl 300)628buildbot # [ 3.752102] ata5: SATA link down (SStatus 0 SControl 300)629buildbot # [ 3.756630] ata2: SATA link down (SStatus 0 SControl 300)630buildbot # [ 3.761463] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)631buildbot # [ 3.765658] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100632buildbot # [ 3.769857] ata3.00: applying bridge limits633buildbot # [ 3.773658] ata6: SATA link down (SStatus 0 SControl 300)634buildbot # [ 3.778020] ata3.00: configured for UDMA/100635buildbot # [ 3.781854] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5636buildbot # [ 3.551184] systemd[1]: Mounted /sysroot/nix/.ro-store.637buildbot # [ 3.830026] usbcore: registered new interface driver usbhid638buildbot # [ 3.834372] usbhid: USB HID core driver639buildbot # [ 3.844808] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2640buildbot # [ 3.847910] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0641buildbot # [ 3.851606] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray642buildbot # [ 3.862469] cdrom: Uniform CD-ROM driver Revision: 3.20643buildbot # [ 3.930483] systemd[1]: Mounting /sysroot/nix/store...644buildbot # [ 3.980565] systemd[1]: Mounted /sysroot/nix/store.645buildbot # [ 3.982815] systemd[1]: Reached target Initrd File Systems.646buildbot # [ 3.985435] systemd[1]: Starting Find NixOS closure...647buildbot # [ 3.988733] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...648buildbot # [ 4.012119] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.649buildbot # [ 4.016114] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.650buildbot # [ 4.025855] systemd[1]: Finished Find NixOS closure.651buildbot # [ 4.028253] systemd[1]: Reached target Initrd Default Target.652buildbot # [ 4.030709] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...653buildbot # [ 4.047371] systemd[1]: Stopped target Initrd Default Target.654buildbot # [ 4.048924] systemd[1]: Stopped target Basic System.655buildbot # [ 4.050332] systemd[1]: Stopped target Initrd Root Device.656buildbot # [ 4.051807] systemd[1]: Stopped target Path Units.657buildbot # [ 4.053665] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.658buildbot # [ 4.056190] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.659buildbot # [ 4.058470] systemd[1]: Stopped target Slice Units.660buildbot # [ 4.061220] systemd[1]: Stopped target Socket Units.661buildbot # [ 4.062619] systemd[1]: Stopped target System Initialization.662buildbot # [ 4.064365] systemd[1]: Stopped target Swaps.663buildbot # [ 4.065615] systemd[1]: Stopped target Timer Units.664buildbot # [ 4.067518] systemd[1]: dbus.socket: Deactivated successfully.665buildbot # [ 4.069198] systemd[1]: Closed D-Bus System Message Bus Socket.666buildbot # [ 4.071208] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.667buildbot # [ 4.073443] systemd[1]: Stopped Find NixOS closure.668buildbot # [ 4.075281] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio669buildbot # [ 4.078256] systemd[1]: Starting rw-sysroot-nix-store.service...670buildbot # [ 4.081226] systemd[1]: systemd-sysctl.service: Deactivated successfully.671buildbot # [ 4.082947] systemd[1]: Stopped Apply Kernel Variables.672buildbot # [ 4.084420] systemd[1]: systemd-modules-load.service: Deactivated successfully.673buildbot # [ 4.086253] systemd[1]: Stopped Load Kernel Modules.674buildbot # [ 4.088154] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.675buildbot # [ 4.090304] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.676buildbot # [ 4.093247] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.677buildbot # [ 4.095291] systemd[1]: Stopped Create System Files and Directories.678buildbot # [ 4.097159] systemd[1]: Stopped target Local File Systems.679buildbot # [ 4.099250] systemd[1]: Stopped target Preparation for Local File Systems.680buildbot # [ 4.101445] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.681buildbot # [ 4.104244] systemd[1]: Stopped Coldplug All udev Devices.682buildbot # [ 4.107196] systemd[1]: Stopping Rule-based Manager for Device Events and Files...683buildbot # [ 4.109138] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.684buildbot # [ 4.111364] systemd[1]: Stopped Virtual Console Setup.685buildbot # [ 4.118940] systemd[1]: initrd-cleanup.service: Deactivated successfully.686buildbot # [ 4.126287] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.687buildbot # [ 4.132555] systemd[1]: systemd-udevd.service: Deactivated successfully.688buildbot # [ 4.136174] systemd[1]: Stopped Rule-based Manager for Device Events and Files.689buildbot # [ 4.139919] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.690buildbot # [ 4.143127] systemd[1]: Finished rw-sysroot-nix-store.service.691buildbot # [ 4.144916] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.692buildbot # [ 4.146929] systemd[1]: Closed udev Control Socket.693buildbot # [ 4.149420] systemd[1]: Starting Cleanup udev Database...694buildbot # [ 4.150959] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.695buildbot # [ 4.153316] systemd[1]: Stopped Create Static Device Nodes in /dev.696buildbot # [ 4.155240] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.697buildbot # [ 4.158242] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.698buildbot # [ 4.160192] systemd[1]: kmod-static-nodes.service: Deactivated successfully.699buildbot # [ 4.162100] systemd[1]: Stopped Create List of Static Device Nodes.700buildbot # [ 4.178196] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.701buildbot # [ 4.180942] systemd[1]: Finished Cleanup udev Database.702buildbot # [ 4.183458] systemd[1]: Reached target Switch Root.703buildbot # [ 4.185977] systemd[1]: Starting NixOS Activation...704buildbot # [ 4.363309] initrd-nixos-activation-start[195]: booting system configuration /nix/store/mawdhqxwc9zc90fma0asx19g30w75a2l-nixos-system-buildbot-test705buildbot # [ 4.433640] initrd-nixos-activation-start[195]: running activation script...706buildbot # [ 4.899995] initrd-nixos-activation-start[218]: setting up /etc...707buildbot # [ 5.209964] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.708buildbot # [ 5.213139] systemd[1]: Finished NixOS Activation.709buildbot # [ 5.215139] systemd[1]: Starting Switch Root...710buildbot # [ 5.230444] systemd[1]: Switching root.711buildbot # [ 5.612625] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).712buildbot # [ 5.774813] NET: Registered PF_VSOCK protocol family713buildbot # [ 6.163825] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)714buildbot # [ 6.170329] systemd[1]: Detected virtualization kvm.715buildbot # [ 6.171550] systemd[1]: Detected architecture x86-64.716buildbot # [ 6.172845] systemd[1]: Detected first boot.717buildbot # [ 6.176536] systemd[1]: Initializing machine ID from random generator.718buildbot # [ 6.424033] systemd[1]: bpf-restrict-fs: LSM BPF program attached719buildbot # [ 6.552496] systemd[1]: Applying preset policy.720buildbot # [ 7.063510] systemd[1]: Populated /etc with preset unit settings.721buildbot # [ 7.609362] systemd[1]: initrd-switch-root.service: Deactivated successfully.722buildbot # [ 7.611748] systemd[1]: Stopped initrd-switch-root.service.723buildbot # [ 7.615740] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.724buildbot # [ 7.618868] systemd[1]: Created slice Slice /system/getty.725buildbot # [ 7.620933] systemd[1]: Created slice User and Session Slice.726buildbot # [ 7.622493] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.727buildbot # [ 7.624500] systemd[1]: Started Forward Password Requests to Wall Directory Watch.728buildbot # [ 7.638440] systemd[1]: Expecting device /dev/hvc0...729buildbot # [ 7.639705] systemd[1]: Expecting device /dev/ttyS0...730buildbot # [ 7.641016] systemd[1]: Reached target Local Encrypted Volumes.731buildbot # [ 7.642523] systemd[1]: Stopped target initrd-fs.target.732buildbot # [ 7.643846] systemd[1]: Stopped target initrd-root-fs.target.733buildbot # [ 7.645244] systemd[1]: Stopped target initrd-switch-root.target.734buildbot # [ 7.646819] systemd[1]: Reached target Virtual Machines and Containers.735buildbot # [ 7.648424] systemd[1]: Reached target Path Units.736buildbot # [ 7.649692] systemd[1]: Reached target Remote File Systems.737buildbot # [ 7.651092] systemd[1]: Reached target Slice Units.738buildbot # [ 7.652401] systemd[1]: Reached target Swaps.739buildbot # [ 7.656752] systemd[1]: Listening on Query the User Interactively for a Password.740buildbot # [ 7.662123] systemd[1]: Listening on Process Core Dump Socket.741buildbot # [ 7.666122] systemd[1]: Listening on Credential Encryption/Decryption.742buildbot # [ 7.669958] systemd[1]: Listening on Factory Reset Management.743buildbot # [ 7.671580] systemd[1]: Listening on Hostname Service Socket.744buildbot # [ 7.676681] systemd[1]: Starting Journal Log Access Socket...745buildbot # [ 7.679009] systemd[1]: Listening on Journal Audit Socket.746buildbot # [ 7.683114] systemd[1]: Listening on Console Output Muting Service Socket.747buildbot # [ 7.685250] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.748buildbot # [ 7.687493] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os749buildbot # [ 7.689729] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki750buildbot # [ 7.701726] systemd[1]: Listening on Disk Repartitioning Service Socket.751buildbot # [ 7.703513] systemd[1]: Listening on udev Control Socket.752buildbot # [ 7.705061] systemd[1]: Listening on udev Varlink Socket.753buildbot # [ 7.710104] systemd[1]: Mounting Huge Pages File System...754buildbot # [ 7.714374] systemd[1]: Mounting POSIX Message Queue File System...755buildbot # [ 7.722878] systemd[1]: Mounting Kernel Debug File System...756buildbot # [ 7.730541] systemd[1]: Mounting Kernel Trace File System...757buildbot # [ 7.738247] systemd[1]: Starting Create List of Static Device Nodes...758buildbot # [ 7.741139] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio759buildbot # [ 7.753140] systemd[1]: Starting Load Kernel Module configfs...760buildbot # [ 7.756129] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm761buildbot # [ 7.758890] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore762buildbot # [ 7.762133] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse763buildbot # [ 7.773935] systemd[1]: Mounting FUSE Control File System...764buildbot # [ 7.781772] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67765buildbot # [ 7.824674] systemd[1]: Starting Journal Service...766buildbot # [ 7.843016] systemd[1]: Starting Load Kernel Modules...767buildbot # [ 7.854551] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...768buildbot # [ 7.866361] systemd[1]: Starting Remount Root and Kernel File Systems...769buildbot # [ 7.878869] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os770buildbot # [ 7.899164] systemd-journald[288]: Collecting audit messages is enabled.771buildbot # [ 7.902006] systemd[1]: Starting Coldplug All udev Devices...772buildbot # [ 7.930965] systemd[1]: Listening on Journal Log Access Socket.773buildbot # [ 7.941688] systemd[1]: Mounted Huge Pages File System.774buildbot # [ 7.944488] loop: module loaded775buildbot # [ 7.950198] systemd[1]: Mounted POSIX Message Queue File System.776buildbot # [ 7.703746] systemd[1]: Queued start job for default target Multi-User System.[ 7.958396] EXT4-fs (vda): re-mounted 189d303a-aef2-4373-ab06-d4dfc511bc84.777buildbot # 778buildbot # [ 7.962387] systemd[1]: Started Journal Service.779buildbot # [ 7.711893] systemd[1]: systemd-journald.service: Deactivated successfully.780buildbot # [ 7.719319] systemd-modules-load[289]: Inserted module 'loop'781buildbot # [ 7.728317] systemd[1]: Mounted Kernel Debug File System.782buildbot # [ 7.731540] systemd[1]: Mounted Kernel Trace File System.783buildbot # [ 7.738161] systemd[1]: Finished Create List of Static Device Nodes.784buildbot # [ 7.741089] systemd-modules-load[289]: Inserted module 'tls'785buildbot # [ 7.744895] systemd[1]: modprobe@configfs.service: Deactivated successfully.786buildbot # [ 7.751449] systemd[1]: Finished Load Kernel Module configfs.787buildbot # [ 7.753132] systemd[1]: Mounted FUSE Control File System.788buildbot # [ 7.756151] systemd[1]: Finished Load Kernel Modules.789buildbot # [ 7.759947] systemd[1]: Finished Remount Root and Kernel File Systems.790buildbot # [ 7.783112] systemd[1]: Listening on Disk Image Download Service Socket.791buildbot # [ 7.786292] systemd-oomd[291]: No swap; memory pressure usage will be degraded792buildbot # [ 7.791163] systemd[1]: Mounting Kernel Configuration File System...793buildbot # [ 7.798805] systemd[1]: Starting Flush Journal to Persistent Storage...794buildbot # [ 7.800767] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore795buildbot # [ 7.815352] systemd[1]: Starting Load/Save OS Random Seed...796buildbot # [ 7.826798] systemd[1]: Starting Apply Kernel Variables...797buildbot # [ 7.838676] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...798buildbot # [ 7.842211] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os799buildbot # [ 7.845139] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.800buildbot # [ 8.126994] systemd-journald[288]: Received client request to flush runtime journal.801buildbot # [ 8.091110] systemd[1]: Finished Load/Save OS Random Seed.802buildbot # [ 8.092975] systemd[1]: Reached target First Boot Complete.803buildbot # [ 8.097422] systemd[1]: Mounted Kernel Configuration File System.804buildbot # [ 8.102142] systemd[1]: Finished Apply Kernel Variables.805buildbot # [ 8.103882] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.806buildbot # [ 8.105940] systemd[1]: Starting Create Static Device Nodes in /dev...807buildbot # [ 8.107977] systemd[1]: Finished Flush Journal to Persistent Storage.808buildbot # [ 8.120155] systemd[1]: Finished Create Static Device Nodes in /dev.809buildbot # [ 8.122108] systemd[1]: Reached target Preparation for Local File Systems.810buildbot # [ 8.128650] systemd[1]: Starting Rule-based Manager for Device Events and Files...811buildbot # [ 8.204224] systemd[1]: Finished Coldplug All udev Devices.812buildbot # [ 8.216693] systemd-udevd[320]: Using default interface naming scheme 'v261'.813buildbot # [ 8.328848] systemd[1]: Started Rule-based Manager for Device Events and Files.814buildbot # [ 8.364122] systemd[1]: Mounting /run/wrappers...815buildbot # [ 8.402522] systemd[1]: Mounted /run/wrappers.816buildbot # [ 8.406158] systemd[1]: Reached target Local File Systems.817buildbot # [ 8.410102] systemd[1]: Listening on Boot Loader Control Service Socket.818buildbot # [ 8.417099] systemd[1]: Starting register-nix-paths.service...819buildbot # [ 8.423107] systemd[1]: Starting Create SUID/SGID Wrappers...820buildbot # [ 8.424690] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.821buildbot # [ 8.438069] systemd[1]: Starting Save Transient machine-id to Disk...822buildbot # [ 8.453233] systemd[1]: Starting Create System Files and Directories...823buildbot # [ 8.517555] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.824buildbot # [ 8.524053] systemd[1]: Finished Save Transient machine-id to Disk.825buildbot # [ 8.591583] systemd[1]: Finished Create System Files and Directories.826buildbot # [ 8.604653] systemd[1]: Starting Rebuild Journal Catalog...827buildbot # [ 8.614234] systemd[1]: Starting Record System Boot/Shutdown in UTMP...828buildbot # [ 8.702385] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse829buildbot # [ 8.716316] systemd[1]: Finished Record System Boot/Shutdown in UTMP.830buildbot # [ 8.759306] systemd[1]: Finished Rebuild Journal Catalog.831buildbot # [ 8.767806] systemd[1]: Starting Update is Completed...832buildbot # [ 8.825632] systemd[1]: Finished Update is Completed.833buildbot # [ 8.918739] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.834buildbot # [ 8.966151] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.835buildbot # [ 9.025356] (udev-worker)[342]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.836buildbot # [ 9.032284] (udev-worker)[342]: Network interface NamePolicy= disabled on kernel command line.837buildbot # [ 9.038585] (udev-worker)[330]: Network interface NamePolicy= disabled on kernel command line.838buildbot # [ 9.072141] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.839buildbot # [ 9.076799] systemd[1]: Finished Create SUID/SGID Wrappers.840buildbot # [ 9.180133] systemd[1]: Condition check resulted in Virtio network device being skipped.841buildbot # [ 9.182233] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore842buildbot # [ 9.191075] systemd[1]: Starting Create SUID/SGID Wrappers...843buildbot # [ 9.193235] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.844buildbot # [ 9.195453] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67845buildbot # [ 9.200667] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore846buildbot # [ 9.204357] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os847buildbot # [ 9.207514] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os848buildbot # [ 9.384260] systemd[1]: Finished register-nix-paths.service.849buildbot # [ 9.682905] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3850buildbot # [ 9.708880] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console851buildbot # [ 9.713234] ACPI: button: Power Button [PWRF]852buildbot # [ 9.747492] mousedev: PS/2 mouse device common for all mice853buildbot # [ 9.813848] rtc_cmos 00:04: RTC can wake from S4854buildbot # [ 9.825565] rtc_cmos 00:04: registered as rtc0855buildbot # [ 9.825782] rtc_cmos 00:04: setting system clock to 2026-08-30T07:50:41 UTC (1788076241)856buildbot # [ 9.825900] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs857buildbot # [ 9.826756] systemd-journald[288]: Time jumped backwards, rotating.858buildbot # [ 9.833557] parport_pc 00:02: reported by Plug and Play ACPI859buildbot # [ 9.833684] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]860buildbot # [ 9.859134] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4861buildbot # [ 9.865428] Console: switching to colour dummy device 80x25862buildbot # [ 9.720767] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.863buildbot # [ 9.724650] systemd[1]: Finished Create SUID/SGID Wrappers.864buildbot # [ 9.726865] systemd[1]: Reached target System Initialization.865buildbot # [ 9.731197] systemd[1]: Started Discard unused filesystem blocks once a week.866buildbot # [ 9.733241] systemd[1]: Started Daily Cleanup of Temporary Directories.867buildbot # [ 9.735445] systemd[1]: Reached target Timer Units.868buildbot # [ 9.737713] systemd[1]: Listening on D-Bus System Message Bus Socket.869buildbot # [ 9.739856] systemd[1]: Listening on Nix Daemon Socket.870buildbot # [ 9.742627] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).871buildbot # [ 9.746233] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.872buildbot # [ 9.748369] systemd[1]: Reached target Socket Units.873buildbot # [ 9.750245] systemd[1]: Reached target Basic System.874buildbot # [ 9.756502] systemd[1]: Started backdoor.service.875buildbot # [ 9.762110] systemd[1]: Starting Import lastlog data into lastlog2 database...876buildbot # [ 9.776878] systemd[1]: Starting Name Service Cache Daemon (nsncd)...877buildbot # [ 9.885153] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized878buildbot # [ 10.019043] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt879buildbot # [ 9.791493] systemd[1]: Starting Post-Boot Actions...880buildbot # [ 9.802763] systemd[1]: Started Reset console on configuration changes.881buildbot # [ 9.824421] systemd[1]: Starting resolvconf update...882buildbot # [ 9.827183] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.883buildbot # connecting to host...884buildbot # [ 10.019189] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD885buildbot # [ 10.137204] [drm] Found bochs VGA, ID 0xb0c5.886buildbot # [ 10.137206] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.887buildbot # [ 9.904345] nsncd[477]: Aug 30 07:50:41.829 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"888buildbot # [ 9.913134] systemd[1]: Starting D-Bus System Message Bus...889buildbot # [ 10.172162] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6890buildbot # [ 9.921661] systemd[1]: Started Name Service Cache Daemon (nsncd).891buildbot # [ 9.924335] systemd[1]: Finished Post-Boot Actions.892buildbot # [ 10.183511] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5893buildbot: Guest shell says: b'Spawning backdoor root shell...\n'894buildbot # [ 10.196071] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic895buildbot: connected to guest root shell896buildbot: (connecting took 10.98 seconds)897buildbot: (finished: waiting for the VM to finish booting, in 11.17 seconds)898buildbot # [ 9.961804] systemd[1]: Reached target Host and Network Name Lookups.899buildbot # [ 9.965503] systemd[1]: Reached target User and Group Name Lookups.900buildbot # [ 10.219689] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0901buildbot # [ 9.985371] systemd[1]: Starting User Login Management...902buildbot # [ 9.990861] systemd[1]: Finished Import lastlog data into lastlog2 database.903buildbot # [ 10.110786] dbus-broker-launch[487]: Looking up NSS user entry for 'systemd-timesync'...904buildbot # [ 10.132899] dbus-broker-launch[487]: NSS returned no entry for 'systemd-timesync'905buildbot # [ 10.136215] dbus-broker-launch[487]: Invalid user-name in /nix/store/1qp3p3iwsljv36kk53ky93i4v2x66bf4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"906buildbot # [ 10.174767] systemd[1]: Started D-Bus System Message Bus.907buildbot # [ 10.189541] systemd[1]: Stopped target Host and Network Name Lookups.908buildbot # [ 10.193172] systemd[1]: Stopping Host and Network Name Lookups...909buildbot # [ 10.196556] systemd[1]: Stopped target User and Group Name Lookups.910buildbot # [ 10.198927] systemd[1]: Stopping User and Group Name Lookups...911buildbot # [ 10.202522] systemd-logind[506]: New seat seat0.912buildbot # [ 10.205383] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...913buildbot # [ 10.207899] systemd[1]: Started User Login Management.914buildbot # [ 10.213388] systemd[1]: nscd.service: Deactivated successfully.915buildbot # [ 10.216972] systemd[1]: Stopped Name Service Cache Daemon (nsncd).916buildbot # [ 10.240661] dbus-broker-launch[487]: Ready917buildbot # [ 10.245145] systemd[1]: Starting linger-users.service...918buildbot # [ 10.255202] systemd[1]: Starting Name Service Cache Daemon (nsncd)...919buildbot # [ 10.299109] systemd[1]: Starting Virtual Console Setup...920buildbot # [ 10.336448] systemd[1]: linger-users.service: Deactivated successfully.921buildbot # [ 10.342694] systemd[1]: Finished linger-users.service.922buildbot # [ 10.351865] systemd[1]: Started Name Service Cache Daemon (nsncd).923buildbot # [ 10.355249] nsncd[562]: Aug 30 07:50:42.277 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"924buildbot # [ 10.360313] systemd[1]: Reached target Host and Network Name Lookups.925buildbot # [ 10.362526] systemd[1]: Reached target User and Group Name Lookups.926buildbot # [ 10.649923] Console: switching to colour frame buffer device 160x50927buildbot # [ 10.701182] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device928buildbot # [ 10.381335] systemd[1]: Finished resolvconf update.929buildbot # [ 10.454917] systemd[1]: Reached target Preparation for Network.930buildbot # [ 10.456655] systemd[1]: Starting DHCP Client...931buildbot # [ 10.463327] systemd[1]: Starting Address configuration of eth1...932buildbot # [ 10.469203] systemd[1]: Starting Extra networking commands....933buildbot # [ 10.471901] systemd-logind[506]: Watching system buttons on /dev/input/event2 (Power Button)934buildbot # [ 10.476718] systemd-logind[506]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)935buildbot # [ 10.480793] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.936buildbot # [ 10.487299] systemd[1]: Stopped Virtual Console Setup.937buildbot # [ 10.502427] systemd[1]: Starting Virtual Console Setup...938buildbot # [ 10.585691] network-addresses-eth1-start[590]: adding address 192.168.1.1/24... done939buildbot # [ 10.845018] ppdev: user-space parallel port driver940buildbot # [ 10.611591] network-addresses-eth1-start[590]: adding address 2001:db8:1::1/64... done941buildbot # [ 10.644485] systemd[1]: Finished Address configuration of eth1.942buildbot # [ 10.727441] dhcpcd[600]: dhcpcd-10.3.2 starting943buildbot # [ 10.992294] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)944buildbot # [ 10.741714] dhcpcd[657]: dev: loaded udev945buildbot # [ 10.751560] systemd[1]: Finished Extra networking commands..946buildbot # [ 10.755966] systemd[1]: Reached target Network.947buildbot # [ 10.766663] systemd[1]: Starting Nginx Web Server...948buildbot # [ 11.031092] 8021q: 802.1Q VLAN Support v1.8949buildbot # [ 10.782509] systemd-logind[506]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)950buildbot # [ 11.037469] 8021q: adding VLAN 0 to HW filter on device eth1951buildbot # [ 10.789926] systemd[1]: Starting PostgreSQL Server...952buildbot # [ 10.808382] systemd[1]: Starting SSH Daemon...953buildbot # [ 10.824400] systemd[1]: Starting Permit User Sessions...954buildbot # [ 11.080769] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)955buildbot # [ 10.946563] systemd[1]: Finished Permit User Sessions.956buildbot # [ 10.962520] systemd[1]: Started Getty on tty1.957buildbot # [ 10.965756] systemd[1]: Reached target Login Prompts.958buildbot # [ 11.008664] sshd[664]: Server listening on 0.0.0.0 port 22.959buildbot # [ 11.013868] systemd[1]: Started SSH Daemon.960buildbot # [ 11.017240] sshd[664]: Server listening on :: port 22.961buildbot # [ 11.026588] systemd[1]: Starting Setup git test repository with scheduled effects...962buildbot # [ 11.392852] cfg80211: Loading compiled-in X.509 certificates for regulatory database963buildbot # [ 11.147891] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.964buildbot # [ 11.156572] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.965buildbot # [ 11.162757] systemd[1]: Stopped Virtual Console Setup.966buildbot # [ 11.190220] systemd[1]: Starting Virtual Console Setup...967buildbot # [ 11.464427] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'968buildbot # [ 11.468834] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'969buildbot # [ 11.225344] setup-git-repo-start[681]: hint: Using 'master' as the name for the initial branch. This default branch name970buildbot # [ 11.228045] setup-git-repo-start[681]: hint: will change to "main" in Git 3.0. To configure the initial branch name971buildbot # [ 11.482806] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2972buildbot # [ 11.484439] cfg80211: failed to load regulatory.db973buildbot # [ 11.233639] setup-git-repo-start[681]: hint: to use in all of your new repositories, which will suppress this warning,974buildbot # [ 11.236086] setup-git-repo-start[681]: hint: call:975buildbot # [ 11.237320] setup-git-repo-start[681]: hint:976buildbot # [ 11.238459] setup-git-repo-start[681]: hint: git config --global init.defaultBranch <name>977buildbot # [ 11.241919] setup-git-repo-start[681]: hint:978buildbot # [ 11.244578] setup-git-repo-start[681]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and979buildbot # [ 11.250922] setup-git-repo-start[681]: hint: 'development'. The just-created branch can be renamed via this command:980buildbot # [ 11.254245] setup-git-repo-start[681]: hint:981buildbot # [ 11.257591] setup-git-repo-start[681]: hint: git branch -m <name>982buildbot # [ 11.261824] setup-git-repo-start[681]: hint:983buildbot # [ 11.265773] setup-git-repo-start[681]: hint: Disable this message with "git config set advice.defaultBranchName false"984buildbot # [ 11.271456] setup-git-repo-start[681]: Initialized empty Git repository in /srv/repos/test-flake.git/985buildbot # [ 11.357166] setup-git-repo-start[698]: hint: Using 'master' as the name for the initial branch. This default branch name986buildbot # [ 11.359640] setup-git-repo-start[698]: hint: will change to "main" in Git 3.0. To configure the initial branch name987buildbot # [ 11.365633] setup-git-repo-start[698]: hint: to use in all of your new repositories, which will suppress this warning,988buildbot # [ 11.370287] setup-git-repo-start[698]: hint: call:989buildbot # [ 11.371539] setup-git-repo-start[698]: hint:990buildbot # [ 11.372650] setup-git-repo-start[698]: hint: git config --global init.defaultBranch <name>991buildbot # [ 11.379130] setup-git-repo-start[698]: hint:992buildbot # [ 11.382962] setup-git-repo-start[698]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and993buildbot # [ 11.385293] setup-git-repo-start[698]: hint: 'development'. The just-created branch can be renamed via this command:994buildbot # [ 11.391824] setup-git-repo-start[698]: hint:995buildbot: (finished: waiting for unit sshd.service, in 12.61 seconds)996buildbot # [ 11.394510] setup-git-repo-start[698]: hint: git branch -m <name>997buildbot: waiting for unit setup-git-repo.service998buildbot # [ 11.397563] setup-git-repo-start[698]: hint:999buildbot # [ 11.400994] setup-git-repo-start[698]: hint: Disable this message with "git config set advice.defaultBranchName false"1000buildbot # [ 11.404886] setup-git-repo-start[698]: Initialized empty Git repository in /tmp/test-flake/.git/1001buildbot # [ 11.411581] nginx-pre-start[676]: nginx: the configuration file /nix/store/fm5b2jl7kjzxkkc7bzkzis1prdivs6hz-nginx.conf syntax is ok1002buildbot # [ 11.414291] nginx-pre-start[676]: nginx: configuration file /nix/store/fm5b2jl7kjzxkkc7bzkzis1prdivs6hz-nginx.conf test is successful1003buildbot # [ 11.420952] postgresql-pre-start[678]: The files belonging to this database system will be owned by user "postgres".1004buildbot # [ 11.424913] postgresql-pre-start[678]: This user must also own the server process.1005buildbot # [ 11.426774] postgresql-pre-start[678]: The database cluster will be initialized with locale "en_US.UTF-8".1006buildbot # [ 11.433428] postgresql-pre-start[678]: The default database encoding has accordingly been set to "UTF8".1007buildbot # [ 11.436608] postgresql-pre-start[678]: The default text search configuration will be set to "english".1008buildbot # [ 11.440184] postgresql-pre-start[678]: Data page checksums are enabled.1009buildbot # [ 11.444449] postgresql-pre-start[678]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok1010buildbot # [ 11.448308] postgresql-pre-start[678]: creating subdirectories ... ok1011buildbot # [ 11.452906] postgresql-pre-start[678]: selecting dynamic shared memory implementation ... posix1012buildbot # [ 11.456244] systemd[1]: Started Nginx Web Server.1013buildbot # [ 11.715140] 8021q: adding VLAN 0 to HW filter on device eth01014buildbot # [ 11.470646] dhcpcd[657]: eth0: waiting for carrier1015buildbot # [ 11.473188] dhcpcd[657]: eth0: carrier acquired1016buildbot # [ 11.500136] dhcpcd[657]: DUID 00:01:00:01:32:26:9d:53:52:54:00:12:34:561017buildbot # [ 11.501810] dhcpcd[657]: eth0: IAID 00:12:34:561018buildbot # [ 11.503142] dhcpcd[657]: eth0: adding address fe80::5054:ff:fe12:34561019buildbot # [ 11.586728] setup-git-repo-start[745]: [master (root-commit) a3507d6] Initial commit with scheduled effects1020buildbot # [ 11.588980] setup-git-repo-start[745]: 3 files changed, 131 insertions(+)1021buildbot # [ 11.594341] setup-git-repo-start[745]: create mode 100644 effects-lib.nix1022buildbot # [ 11.596787] setup-git-repo-start[745]: create mode 100644 flake.lock1023buildbot # [ 11.599860] setup-git-repo-start[745]: create mode 100644 flake.nix1024buildbot # [ 11.893855] kvm_amd: TSC scaling supported1025buildbot # [ 11.644485] postgresql-pre-start[678]: selecting default "max_connections" ... 1001026buildbot # [ 11.901403] kvm_amd: Nested Virtualization enabled1027buildbot # [ 11.910401] kvm_amd: Nested Paging enabled1028buildbot # [ 11.911163] kvm_amd: LBR virtualization supported1029buildbot # [ 11.916152] kvm_amd: Virtual VMLOAD VMSAVE supported1030buildbot # [ 11.919924] kvm_amd: Virtual GIF supported1031buildbot # [ 11.926688] kvm_amd: Virtual NMI enabled1032buildbot # [ 12.020564] EDAC MC: Ver: 3.0.01033buildbot # [ 11.778682] setup-git-repo-start[752]: To /srv/repos/test-flake.git1034buildbot # [ 11.780598] setup-git-repo-start[752]: * [new branch] master -> master1035buildbot # [ 11.786849] setup-git-repo-start[752]: branch 'master' set up to track 'origin/master'.1036buildbot # [ 11.797702] systemd[1]: Finished Setup git test repository with scheduled effects.1037buildbot # [ 11.817125] postgresql-pre-start[678]: selecting default "shared_buffers" ... 128MB1038buildbot # [ 11.826399] systemd-vconsole-setup[685]: Configuration of first virtual console was skipped, ignoring remaining ones.1039buildbot # [ 11.833139] systemd[1]: Finished Virtual Console Setup.1040buildbot: (finished: waiting for unit setup-git-repo.service, in 1.25 seconds)1041buildbot: waiting for unit multi-user.target1042buildbot # [ 12.822906] dhcpcd[657]: eth0: soliciting a DHCP lease1043buildbot # [ 13.091889] NET: Registered PF_PACKET protocol family1044buildbot # [ 12.844657] dhcpcd[657]: eth0: offered 10.0.2.15 from 10.0.2.21045buildbot # [ 12.848232] dhcpcd[657]: eth0: probing address 10.0.2.15/241046buildbot # [ 13.970732] dhcpcd[657]: eth0: soliciting an IPv6 router1047buildbot # [ 13.973096] dhcpcd[657]: eth0: Router Advertisement from fe80::21048buildbot # [ 13.974845] dhcpcd[657]: eth0: adding address fec0::5054:ff:fe12:3456/641049buildbot # [ 13.976599] dhcpcd[657]: eth0: adding route to fec0::/641050buildbot # [ 13.978261] dhcpcd[657]: eth0: adding default route via fe80::21051buildbot # [ 14.082401] postgresql-pre-start[678]: selecting default time zone ... UTC1052buildbot # [ 14.087292] postgresql-pre-start[678]: creating configuration files ... ok1053buildbot # [ 14.336861] postgresql-pre-start[678]: running bootstrap script ... ok1054buildbot # [ 15.039439] postgresql-pre-start[678]: performing post-bootstrap initialization ... ok1055buildbot # [ 15.235848] postgresql-pre-start[678]: syncing data to disk ... ok1056buildbot # [ 15.237512] postgresql-pre-start[678]: initdb: warning: enabling "trust" authentication for local connections1057buildbot # [ 15.239772] postgresql-pre-start[678]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1058buildbot # [ 15.243327] postgresql-pre-start[678]: Success. You can now start the database server using:1059buildbot # [ 15.245320] postgresql-pre-start[678]: pg_ctl -D /var/lib/postgresql/18 -l logfile start1060buildbot # [ 15.366462] postgres[818]: [818] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1061buildbot # [ 15.376830] postgres[818]: [818] LOG: listening on IPv6 address "::1", port 54321062buildbot # [ 15.378863] postgres[818]: [818] LOG: listening on IPv4 address "127.0.0.1", port 54321063buildbot # [ 15.381535] postgres[818]: [818] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1064buildbot # [ 15.395337] postgres[827]: [827] LOG: database system was shut down at 2026-08-30 07:50:46 GMT1065buildbot # [ 15.401209] postgres[818]: [818] LOG: database system is ready to accept connections1066buildbot # [ 15.408621] systemd[1]: Started PostgreSQL Server.1067buildbot # [ 15.414872] systemd[1]: Starting PostgreSQL Setup Scripts...1068buildbot # [ 15.631350] postgresql-setup-start[838]: CREATE DATABASE1069buildbot # [ 15.680713] postgresql-setup-start[848]: CREATE ROLE1070buildbot # [ 15.703456] postgresql-setup-start[850]: ALTER DATABASE1071buildbot # [ 15.710580] systemd[1]: Finished PostgreSQL Setup Scripts.1072buildbot # [ 15.713097] systemd[1]: Reached target PostgreSQL.1073buildbot # [ 15.717983] systemd[1]: Starting Buildbot Continuous Integration Server....1074buildbot # [ 15.773861] buildbot-master-pre-start[855]: mkdir: created directory '/var/lib/buildbot/master'1075buildbot # [ 17.836242] dhcpcd[657]: eth0: leased 10.0.2.15 for 86400 seconds1076buildbot # [ 17.838528] dhcpcd[657]: eth0: adding route to 10.0.2.0/241077buildbot # [ 17.840308] dhcpcd[657]: eth0: adding default route via 10.0.2.21078buildbot # [ 17.971233] systemd[1]: Started DHCP Client.1079buildbot # [ 21.913925] buildbot-master-pre-start[857]: updating existing installation1080buildbot # [ 21.915765] buildbot-master-pre-start[857]: not touching existing buildbot.tac1081buildbot # [ 21.919169] buildbot-master-pre-start[857]: creating buildbot.tac.new instead1082buildbot # [ 21.920853] buildbot-master-pre-start[857]: creating /var/lib/buildbot/master/master.cfg.sample1083buildbot # [ 21.922884] buildbot-master-pre-start[857]: creating database (postgresql://@/buildbot)1084buildbot # [ 21.924815] buildbot-master-pre-start[857]: buildmaster configured in /var/lib/buildbot/master1085buildbot # [ 22.134496] systemd[1]: Started Buildbot Continuous Integration Server..1086buildbot # [ 22.142289] systemd[1]: Started Buildbot Worker..1087buildbot # [ 22.145485] systemd[1]: Reached target Multi-User System.1088buildbot # [ 22.147650] systemd[1]: Startup finished in 1.056s (kernel) + 4.398s (initrd) + 16.692s (userspace) = 22.147s.1089buildbot: (finished: waiting for unit multi-user.target, in 9.95 seconds)1090subtest: Master and worker services start1091buildbot: waiting for unit buildbot-master.service1092buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds)1093buildbot: waiting for unit buildbot-worker.service1094buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds)1095buildbot: waiting for TCP port 8010 on localhost1096buildbot # [ 23.856493] twistd[975]: Starting worker local-worker-0001097buildbot # [ 23.858188] twistd[975]: 2026-08-30T07:50:55+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1098buildbot # [ 23.862213] twistd[975]: 2026-08-30T07:50:55+0000 [-] Loaded.1099buildbot # [ 23.864180] twistd[975]: 2026-08-30T07:50:55+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up.1100buildbot # [ 23.868272] twistd[975]: 2026-08-30T07:50:55+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1101buildbot # [ 23.871734] twistd[975]: 2026-08-30T07:50:55+0000 [-] Starting Worker -- version: 2026.08.301102buildbot # [ 23.873996] twistd[975]: 2026-08-30T07:50:55+0000 [-] recording hostname in twistd.hostname1103buildbot # [ 23.876921] twistd[975]: 2026-08-30T07:50:55+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742079e48050>1104buildbot # [ 23.890108] twistd[975]: 2026-08-30T07:50:55+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x742079e48590> in 2.0333718133164753 seconds.1105buildbot # [ 23.895452] twistd[975]: 2026-08-30T07:50:55+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x742079e48050>1106buildbot # [ 25.932253] twistd[975]: 2026-08-30T07:50:57+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742079e48050>1107buildbot # [ 25.937620] twistd[975]: 2026-08-30T07:50:57+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x742079e48590> in 2.394333354098433 seconds.1108buildbot # [ 25.942447] twistd[975]: 2026-08-30T07:50:57+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x742079e48050>1109buildbot # [ 26.026436] twistd[974]: 2026-08-30T07:50:55+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1110buildbot # [ 26.028887] twistd[974]: 2026-08-30T07:50:57+0000 [-] Loaded.1111buildbot # [ 26.030479] twistd[974]: 2026-08-30T07:50:57+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up.1112buildbot # [ 26.034622] twistd[974]: 2026-08-30T07:50:57+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1113buildbot # [ 26.037878] twistd[974]: 2026-08-30T07:50:57+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01114buildbot # [ 26.049727] twistd[974]: 2026-08-30T07:50:57+0000 [-] Loading configuration from '/nix/store/6m528szw698gvgsikn6qm15ww7fgxlr9-master.cfg'1115buildbot # [ 27.036442] twistd[974]: 2026-08-30T07:50:58+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1116buildbot # [ 27.149114] twistd[974]: 2026-08-30T07:50:59+0000 [-] adding 9 new builders, removing 01117buildbot # [ 27.361203] twistd[974]: 2026-08-30T07:50:59+0000 [-] adding 3 new services, removing 01118buildbot # [ 27.529494] twistd[974]: 2026-08-30T07:50:59+0000 [-] adding 1 new change_sources, removing 01119buildbot # [ 27.538681] twistd[974]: 2026-08-30T07:50:59+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1120buildbot # [ 27.555782] twistd[974]: 2026-08-30T07:50:59+0000 [-] adding 14 new schedulers, removing 01121buildbot # [ 27.779833] twistd[974]: 2026-08-30T07:50:59+0000 [-] BuildbotSite starting on 80101122buildbot # [ 27.781747] twistd[974]: 2026-08-30T07:50:59+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x751c41300d70>1123buildbot # [ 27.785058] twistd[974]: 2026-08-30T07:50:59+0000 [-] adding 5 new workers, removing 01124buildbot # [ 27.798558] twistd[974]: 2026-08-30T07:50:59+0000 [-] PBServerFactory starting on 99891125buildbot # [ 27.800754] twistd[974]: 2026-08-30T07:50:59+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x751c413017f0>1126buildbot # [ 27.836836] twistd[974]: 2026-08-30T07:50:59+0000 [-] Starting Worker -- version: 2026.08.301127buildbot # [ 27.839354] twistd[974]: 2026-08-30T07:50:59+0000 [-] recording hostname in twistd.hostname1128buildbot # [ 27.841427] twistd[974]: 2026-08-30T07:50:59+0000 [-] message from master: attached1129buildbot # [ 27.844534] twistd[974]: 2026-08-30T07:50:59+0000 [-] Got workerinfo from '__Janitor'1130buildbot # [ 27.852926] twistd[974]: 2026-08-30T07:50:59+0000 [-] bot attached1131buildbot # [ 27.854489] twistd[974]: 2026-08-30T07:50:59+0000 [-] Worker __Janitor attached to __Janitor1132buildbot # [ 27.856466] twistd[974]: 2026-08-30T07:50:59+0000 [-] message from master: attached1133buildbot # [ 27.888746] sshd-session[1039]: Accepted publickey for root from ::1 port 59136 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81134buildbot # [ 27.904768] twistd[974]: 2026-08-30T07:50:59+0000 [-] BuildMaster is running1135buildbot # [ 27.913747] sshd-session[1039]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1136buildbot # [ 27.963735] systemd-logind[506]: New session '1' of user 'root' with class 'user' and type 'tty'.1137buildbot # [ 27.970992] systemd[1]: Created slice Slice /user/0.1138buildbot # [ 27.977192] systemd[1]: Starting User Runtime Directory /run/user/0...1139buildbot # [ 28.021048] systemd[1]: Finished User Runtime Directory /run/user/0.1140buildbot # [ 28.027700] systemd[1]: Starting User Manager for UID 0...1141buildbot # [ 28.066885] (systemd)[1045]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1142buildbot # [ 28.075650] systemd-logind[506]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1143buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1144buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.41 seconds)1145??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1146 File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391147buildbot: waiting for success: curl --fail --head http://localhost:80101148??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1149 File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391150buildbot # [ 28.206821] systemd[1045]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1151buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1152buildbot # Dload Upload Total Spent Left Speed1153buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 [ 28.343618] twistd[975]: 2026-08-30T07:51:00+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742079e48050>1154buildbot # 0 0 0 0 [ 28.362313] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=38764)1155buildbot # [ 28.368530] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1156buildbot # 0 0 0 0 0 0 0 [ 28.385518] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1157buildbot # 0 0 0 0 0 0 0 0 [ 28.409707] twistd[974]: 2026-08-30T07:51:00+0000 [-] bot attached1158buildbot # 0 0 0 [ 28.425073] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1159buildbot # [ 28.427777] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1160buildbot # [ 28.430418] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1161buildbot # [ 28.434127] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1162buildbot # 01163buildbot # [ 28.438388] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1164buildbot # [ 28.442121] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1165buildbot # [ 28.446153] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1166buildbot # [ 28.450717] twistd[974]: 2026-08-30T07:51:00+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1167buildbot # [ 28.453386] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1168buildbot # [ 28.456450] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1169buildbot # [ 28.458961] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1170buildbot # [ 28.461388] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1171buildbot # [ 28.464339] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1172buildbot # [ 28.466591] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1173buildbot # [ 28.469559] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1174buildbot # [ 28.472591] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] message from master: attached1175buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.28 seconds)1176(finished: subtest: Master and worker services start, in 5.88 seconds)1177subtest: Project is registered1178buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1179buildbot # [ 28.488507] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] Connected to buildmaster; worker is ready1180buildbot # [ 28.493537] twistd[975]: 2026-08-30T07:51:00+0000 [Broker,client] sending application-level keepalives every 600 seconds1181buildbot # [ 28.586092] systemd[1045]: Queued start job for default target Main User Target.1182buildbot # [ 28.588313] systemd[1045]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1183buildbot # [ 28.597577] systemd[1045]: Created slice User Application Slice.1184buildbot # [ 28.613294] systemd[1045]: Started Daily Cleanup of User's Temporary Directories.1185buildbot # [ 28.618486] systemd[1045]: Reached target Paths.1186buildbot # [ 28.625171] systemd[1045]: Reached target Timers.1187buildbot # [ 28.635127] systemd[1045]: Starting D-Bus User Message Bus Socket...1188buildbot # [ 28.644061] systemd[1045]: Starting Create User Files and Directories...1189buildbot # [ 28.666537] systemd[1045]: Finished Create User Files and Directories.1190buildbot # % Total % Received % Xferd[ 28.734903] systemd[1045]: Listening on D-Bus User Message Bus Socket.1191buildbot # [ 28.736645] systemd[1045]: Reached target Sockets.1192buildbot # [ 28.740371] systemd[1045]: Reached target Basic System.1193buildbot # Average Spee[ 28.745338] systemd[1045]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1194buildbot # [ 28.747786] systemd[1045]: Reached target Main User Target.1195buildbot # [ 28.749305] systemd[1045]: Startup finished in 615ms.1196buildbot # d Time Time [ 28.754543] systemd[1]: Started User Manager for UID 0.1197buildbot # [ 28.756572] systemd[1]: Started Session 1 of User root.1198buildbot # Time Current1199buildbot # Dload Upload Total Spent Left Speed1200buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 3147 0 0100 266 100 266 0 [ 28.827333] sshd-session[1075]: Received disconnect from ::1 port 59136:11: disconnected by user1201buildbot # [ 28.830221] sshd-session[1075]: Disconnected from user root ::1 port 591361202buildbot # 0 2[ 28.833211] sshd-session[1039]: pam_unix(sshd:session): session closed for user root1203buildbot # 649 0 [ 28.843198] systemd[1]: session-1.scope: Deactivated successfully.1204buildbot # [ 28.847229] systemd-logind[506]: Session 1 logged out. Waiting for processes to exit.1205buildbot # 01[ 28.854671] systemd-logind[506]: Removed session 1.1206buildbot # 00 266 100 266 0 0 1978 0 01207buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.40 seconds)1208(finished: subtest: Project is registered, in 0.40 seconds)1209subtest: CLI list-schedules works1210buildbot: must succeed: 1211 cd /tmp/test-flake1212 buildbot-effects list-schedules1213 1214buildbot # [ 29.055611] sshd-session[1084]: Accepted publickey for root from ::1 port 59146 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81215buildbot # [ 29.073272] sshd-session[1084]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1216buildbot # [ 29.087237] systemd-logind[506]: New session '3' of user 'root' with class 'user' and type 'tty'.1217buildbot # [ 29.089971] systemd[1]: Started Session 3 of User root.1218buildbot # [ 29.151430] sshd-session[1087]: Received disconnect from ::1 port 59146:11: disconnected by user1219buildbot # [ 29.155834] sshd-session[1087]: Disconnected from user root ::1 port 591461220buildbot # [ 29.161104] sshd-session[1084]: pam_unix(sshd:session): session closed for user root1221buildbot # [ 29.168420] systemd[1]: session-3.scope: Deactivated successfully.1222buildbot # [ 29.172343] systemd-logind[506]: Session 3 logged out. Waiting for processes to exit.1223buildbot # [ 29.174463] systemd-logind[506]: Removed session 3.1224buildbot # [ 29.211148] twistd[974]: 2026-08-30T07:51:01+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1225buildbot: (finished: must succeed: 1226 cd /tmp/test-flake1227 buildbot-effects list-schedules1228 , in 0.58 seconds)1229(finished: subtest: CLI list-schedules works, in 0.58 seconds)1230subtest: Push a new commit to trigger build1231buildbot: must succeed: 1232 cd /tmp/test-flake1233 echo "# trigger rebuild" >> flake.nix1234 git add flake.nix1235 git commit -m "Trigger build"1236 git push origin master1237 1238buildbot # Enumerating objects: 5, done.1239buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1240buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1241buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done.1242buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1243buildbot # To /srv/repos/test-flake.git1244buildbot # a3507d6..5ce38e0 master -> master1245buildbot: (finished: must succeed: 1246 cd /tmp/test-flake1247 echo "# trigger rebuild" >> flake.nix1248 git add flake.nix1249 git commit -m "Trigger build"1250 git push origin master1251 , in 0.13 seconds)1252(finished: subtest: Push a new commit to trigger build, in 0.13 seconds)1253subtest: Wait for nix-eval build to complete1254??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1255 File "/nix/store/n2idrk0jvf991mc9cwbdlyb60018wbhz-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281256buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1257buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1258buildbot # Dload Upload Total Spent Left Speed1259buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1348 0 0100 51 100 51 0 0 1065 0 0100 51 100 51 0 0 884 0 01260buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1261buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1262buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1263buildbot # Dload Upload Total Spent Left Speed1264buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1343 0 0100 51 100 51 0 0 1065 0 0100 51 100 51 0 0 885 0 01265buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1266buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1267buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1268buildbot # Dload Upload Total Spent Left Speed1269buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1287 0 0100 51 100 51 0 0 1034 0 0100 51 100 51 0 0 862 0 01270buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1271buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1272buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1273buildbot # Dload Upload Total Spent Left Speed1274buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1305 0 0100 51 100 51 0 0 1039 0 0100 51 100 51 0 0 866 0 01275buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1276buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1277buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1278buildbot # Dload Upload Total Spent Left Speed1279buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1275 0 0100 51 100 51 0 0 1018 0 0100 51 100 51 0 0 851 0 01280buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1281buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1282buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1283buildbot # Dload Upload Total Spent Left Speed1284buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1304 0 0100 51 100 51 0 0 1042 0 0100 51 100 51 0 0 869 0 01285buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1286buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1287buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1288buildbot # Dload Upload Total Spent Left Speed1289buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1290 0 0100 51 100 51 0 0 1029 0 0100 51 100 51 0 0 860 0 01290buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1291buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1292buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1293buildbot # Dload Upload Total Spent Left Speed1294buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 949 0 0100 51 100 51 0 0 787 0 0100 51 100 51 0 0 684 0 01295buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1296buildbot # [ 37.786347] sshd-session[1154]: Accepted publickey for root from ::1 port 50846 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81297buildbot # [ 37.804110] sshd-session[1154]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1298buildbot # [ 37.816221] systemd-logind[506]: New session '4' of user 'root' with class 'user' and type 'tty'.1299buildbot # [ 37.819340] systemd[1]: Started Session 4 of User root.1300buildbot # [ 37.858992] sshd-session[1157]: Received disconnect from ::1 port 50846:11: disconnected by user1301buildbot # [ 37.862770] sshd-session[1157]: Disconnected from user root ::1 port 508461302buildbot # [ 37.865151] sshd-session[1154]: pam_unix(sshd:session): session closed for user root1303buildbot # [ 37.875935] systemd[1]: session-4.scope: Deactivated successfully.1304buildbot # [ 37.882781] systemd-logind[506]: Session 4 logged out. Waiting for processes to exit.1305buildbot # [ 37.885829] systemd-logind[506]: Removed session 4.1306buildbot # [ 38.080791] sshd-session[1162]: Accepted publickey for root from ::1 port 50850 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81307buildbot # [ 38.097610] sshd-session[1162]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1308buildbot # [ 38.109101] systemd-logind[506]: New session '5' of user 'root' with class 'user' and type 'tty'.1309buildbot # [ 38.113485] systemd[1]: Started Session 5 of User root.1310buildbot # [ 38.169263] sshd-session[1165]: Received disconnect from ::1 port 50850:11: disconnected by user1311buildbot # [ 38.171666] sshd-session[1165]: Disconnected from user root ::1 port 508501312buildbot # [ 38.174739] sshd-session[1162]: pam_unix(sshd:session): session closed for user root1313buildbot # [ 38.182608] systemd[1]: session-5.scope: Deactivated successfully.1314buildbot # [ 38.187496] systemd-logind[506]: Session 5 logged out. Waiting for processes to exit.1315buildbot # [ 38.191235] systemd-logind[506]: Removed session 5.1316buildbot # [ 38.214327] twistd[974]: 2026-08-30T07:51:10+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1317buildbot # [ 38.251112] twistd[974]: 2026-08-30T07:51:10+0000 [-] gitpoller: processing 1 changes: ['5ce38e099b231ed61b39c6f724f3b8875e5ffb78'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1318buildbot # [ 38.333715] twistd[974]: 2026-08-30T07:51:10+0000 [-] added change with revision 5ce38e099b231ed61b39c6f724f3b8875e5ffb78 to database1319buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1320buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1321buildbot # Dload Upload Total Spent Left Speed1322buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1346 0 0100 51 100 51 0 0 1069 0 0100 51 100 51 0 0 887 0 01323buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1324buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1325buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1326buildbot # Dload Upload Total Spent Left Speed1327buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1304 0 0100 51 100 51 0 0 1046 0 0100 51 100 51 0 0 871 0 01328buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1329buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1330buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1331buildbot # Dload Upload Total Spent Left Speed1332buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1328 0 0100 51 100 51 0 0 1054 0 0100 51 100 51 0 0 877 0 01333buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1334buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1335buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1336buildbot # Dload Upload Total Spent Left Speed1337buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1333 0 0100 51 100 51 0 0 1056 0 0100 51 100 51 0 0 879 0 01338buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1339buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1340buildbot # [ 43.371229] twistd[974]: 2026-08-30T07:51:15+0000 [-] added buildset 1 to database1341buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1342buildbot # Dload Upload Total Spent Left Speed1343buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1524 0 0100 51 100 51 0 0 1178 0 0100 51 100 51 0 0 961 0 01344buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1345buildbot # [ 43.495672] twistd[974]: 2026-08-30T07:51:15+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1346buildbot # [ 43.500065] twistd[974]: 2026-08-30T07:51:15+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1347buildbot # [ 43.554097] twistd[974]: 2026-08-30T07:51:15+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1348buildbot # [ 43.559136] twistd[974]: 2026-08-30T07:51:15+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1349buildbot # [ 43.564598] twistd[974]: 2026-08-30T07:51:15+0000 [-] sending ping1350buildbot # [ 43.566925] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] message from master: ping1351buildbot # [ 43.569574] twistd[974]: 2026-08-30T07:51:15+0000 [Broker,0,127.0.0.1] ping finished: success1352buildbot # [ 43.593117] twistd[974]: 2026-08-30T07:51:15+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1353buildbot # [ 43.595579] twistd[974]: 2026-08-30T07:51:15+0000 [-] command '['git', '--version']' in dir 'build'1354buildbot # [ 43.600118] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 0): startCommand:shell1355buildbot # [ 43.602188] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1356buildbot # [ 43.604641] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '--version']): git --version1357buildbot # [ 43.606923] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1358buildbot # [ 43.611566] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1359buildbot # [ 43.614203] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1360buildbot # [ 43.618373] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '--version']): using PTY: False1361buildbot # [ 43.637722] twistd[975]: 2026-08-30T07:51:15+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0203811362buildbot # [ 43.641149] twistd[975]: 2026-08-30T07:51:15+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742079e4a7b0>1363buildbot # [ 43.667220] twistd[974]: 2026-08-30T07:51:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01364buildbot # [ 43.705660] twistd[974]: 2026-08-30T07:51:15+0000 [-] <RemoteCommand 'stat' at 128764213479472>: RemoteCommand.run [1]1365buildbot # [ 43.711659] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 1): startCommand:stat1366buildbot # [ 43.714093] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1367buildbot # [ 43.720120] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x74207a52bb60>1368buildbot # [ 43.724128] twistd[974]: 2026-08-30T07:51:15+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 128764213479472> rc=21369buildbot # [ 43.738171] twistd[974]: 2026-08-30T07:51:15+0000 [-] <RemoteCommand 'mkdir' at 128764194732176>: RemoteCommand.run [2]1370buildbot # [ 43.768690] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 2): startCommand:mkdir1371buildbot # [ 43.771217] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x742079e49010>1372buildbot # [ 43.776959] twistd[974]: 2026-08-30T07:51:15+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 128764194732176> rc=01373buildbot # [ 43.784169] twistd[974]: 2026-08-30T07:51:15+0000 [-] <RemoteCommand 'downloadFile' at 128764194733136>: RemoteCommand.run [3]1374buildbot # [ 43.817732] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 3): startCommand:downloadFile1375buildbot # [ 43.822569] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x742079e48d70>1376buildbot # [ 43.827820] twistd[974]: 2026-08-30T07:51:15+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 128764194733136> rc=01377buildbot # [ 43.835662] twistd[974]: 2026-08-30T07:51:15+0000 [-] <RemoteCommand 'listdir' at 128764194733456>: RemoteCommand.run [4]1378buildbot # [ 43.869103] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 4): startCommand:listdir1379buildbot # [ 43.871266] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x742079e48c20>1380buildbot # [ 43.875647] twistd[974]: 2026-08-30T07:51:15+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 128764194733456> rc=01381buildbot # [ 43.885593] twistd[974]: 2026-08-30T07:51:15+0000 [-] No git repo present, making full clone1382buildbot # [ 43.887568] twistd[974]: 2026-08-30T07:51:15+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1383buildbot # [ 43.893672] twistd[974]: 2026-08-30T07:51:15+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1384buildbot # [ 43.921096] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command 5): startCommand:shell1385buildbot # [ 43.923430] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1386buildbot # [ 43.929831] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1387buildbot # [ 43.951910] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1388buildbot # [ 43.959342] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1389buildbot # [ 43.965731] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1390buildbot # [ 43.975900] twistd[975]: 2026-08-30T07:51:15+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1391buildbot # [ 44.200722] sshd-session[1201]: Accepted publickey for root from ::1 port 57770 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81392buildbot # [ 44.226412] sshd-session[1201]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1393buildbot # [ 44.238319] systemd-logind[506]: New session '6' of user 'root' with class 'user' and type 'tty'.1394buildbot # [ 44.242438] systemd[1]: Started Session 6 of User root.1395buildbot # [ 44.309420] sshd-session[1204]: Received disconnect from ::1 port 57770:11: disconnected by user1396buildbot # [ 44.311863] sshd-session[1204]: Disconnected from user root ::1 port 577701397buildbot # [ 44.314301] sshd-session[1201]: pam_unix(sshd:session): session closed for user root1398buildbot # [ 44.322273] systemd[1]: session-6.scope: Deactivated successfully.1399buildbot # [ 44.325774] systemd-logind[506]: Session 6 logged out. Waiting for processes to exit.1400buildbot # [ 44.330356] systemd-logind[506]: Removed session 6.1401buildbot # [ 44.349127] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.4087131402buildbot # [ 44.356211] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742079e016d0>1403buildbot # [ 44.362225] twistd[974]: 2026-08-30T07:51:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01404buildbot # [ 44.391666] twistd[974]: 2026-08-30T07:51:16+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']'>: RemoteCommand.run [6]1405buildbot # [ 44.397911] twistd[974]: 2026-08-30T07:51:16+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']' in dir 'build'1406buildbot # [ 44.410932] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command 6): startCommand:shell1407buildbot # [ 44.413432] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): RunProcess._startCommand1408buildbot # [ 44.421095] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 5ce38e099b231ed61b39c6f724f3b8875e5ffb781409buildbot # [ 44.429369] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1410buildbot # [ 44.436581] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): watching logfiles {}1411buildbot # [ 44.442110] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'5ce38e099b231ed61b39c6f724f3b8875e5ffb78']1412buildbot # [ 44.450896] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): using PTY: False1413buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1414buildbot # [ 44.481801] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']): command finished with signal None, exit code 0, elapsedTime: 0.0613701415buildbot # [ 44.488449] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742079e02850>1416buildbot # [ 44.499936] twistd[974]: 2026-08-30T07:51:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78']'> rc=01417buildbot # [ 44.532113] twistd[974]: 2026-08-30T07:51:16+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1418buildbot # [ 44.537442] twistd[974]: 2026-08-30T07:51:16+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1419buildbot # [ 44.544249] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command 7): startCommand:shell1420buildbot # [ 44.546665] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1421buildbot # [ 44.555097] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1422buildbot # [ 44.562883] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1423buildbot # [ 44.569613] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1424buildbot # [ 44.576359] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1425buildbot # [ 44.584757] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1426buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1427buildbot # Dload Upload Total Spent Left Speed1428buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 7630 0 0100 401 100 401 0 0 5999 0 0100 401 100 401 0 0 4913 0 01429buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.25 seconds)1430buildbot # [ 44.778252] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.2231401431buildbot # [ 44.784283] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a3f6780>1432buildbot # [ 44.789617] twistd[974]: 2026-08-30T07:51:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01433buildbot # [ 44.811929] twistd[974]: 2026-08-30T07:51:16+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1434buildbot # [ 44.814589] twistd[974]: 2026-08-30T07:51:16+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1435buildbot # [ 44.837966] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command 8): startCommand:shell1436buildbot # [ 44.841089] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1437buildbot # [ 44.843697] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1438buildbot # [ 44.846258] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1439buildbot # [ 44.851568] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1440buildbot # [ 44.854220] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1441buildbot # [ 44.857106] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1442buildbot # [ 44.874649] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0241701443buildbot # [ 44.878192] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a3f68b0>1444buildbot # [ 44.904839] twistd[974]: 2026-08-30T07:51:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01445buildbot # [ 44.929343] twistd[974]: 2026-08-30T07:51:16+0000 [-] Got Git revision 5ce38e099b231ed61b39c6f724f3b8875e5ffb781446buildbot # [ 44.931665] twistd[974]: 2026-08-30T07:51:16+0000 [-] <RemoteCommand 'rmdir' at 128764195258448>: RemoteCommand.run [9]1447buildbot # [ 44.950098] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command 9): startCommand:rmdir1448buildbot # [ 44.952201] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1449buildbot # [ 44.957944] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1450buildbot # [ 44.962517] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1451buildbot # [ 44.966774] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1452buildbot # [ 44.970331] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1453buildbot # [ 44.975251] twistd[975]: 2026-08-30T07:51:16+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1454buildbot # [ 44.993994] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0371621455buildbot # [ 44.998674] twistd[975]: 2026-08-30T07:51:16+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x742079e4b380>1456buildbot # [ 45.024522] twistd[974]: 2026-08-30T07:51:16+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 128764195258448> rc=01457buildbot # [ 45.046112] twistd[974]: 2026-08-30T07:51:16+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1458buildbot # [ 45.073106] twistd[974]: 2026-08-30T07:51:16+0000 [-] step 'git' complete: success (None)1459buildbot # [ 45.081710] twistd[974]: 2026-08-30T07:51:17+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x751c43669940>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x751c4366acf0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x751c4366acf0>)])1460buildbot # [ 45.104673] twistd[974]: 2026-08-30T07:51:17+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1461buildbot # [ 45.108096] twistd[974]: 2026-08-30T07:51:17+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1462buildbot # [ 45.112044] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command 10): startCommand:shell1463buildbot # [ 45.116093] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1464buildbot # [ 45.119505] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1465buildbot # [ 45.123659] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1466buildbot # [ 45.128244] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1467buildbot # [ 45.133067] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1468buildbot # [ 45.137562] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1469buildbot # [ 45.163348] twistd[975]: 2026-08-30T07:51:17+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0313281470buildbot # [ 45.167658] twistd[975]: 2026-08-30T07:51:17+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a416e70>1471buildbot # [ 45.186094] twistd[974]: 2026-08-30T07:51:17+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01472buildbot # [ 45.192901] twistd[974]: 2026-08-30T07:51:17+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1473buildbot # [ 45.200503] twistd[974]: 2026-08-30T07:51:17+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1474buildbot # [ 45.208922] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command 11): startCommand:shell1475buildbot # [ 45.211400] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1476buildbot # [ 45.218987] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1477buildbot # [ 45.231088] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1478buildbot # [ 45.239553] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1479buildbot # [ 45.246696] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1480buildbot # [ 45.259179] twistd[975]: 2026-08-30T07:51:17+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1481buildbot # [ 45.569963] systemd[1]: Started Nix Daemon.1482buildbot # [ 45.689260] nix-daemon[1247]: accepted connection from pid 1245, user buildbot-worker1483buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1484buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1485buildbot # Dload Upload Total Spent Left Speed1486buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 11134 0 0100 401 100 401 0 0 8689 0 0100 401 100 401 0 0 7173 0 01487buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1488buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1489buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1490buildbot # Dload Upload Total Spent Left Speed1491buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 10510 0 0100 401 100 401 0 0 8362 0 0100 401 100 401 0 0 6953 0 01492buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1493buildbot # [ 47.829828] sshd-session[1264]: Accepted publickey for root from ::1 port 57774 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81494buildbot # [ 47.857511] sshd-session[1264]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1495buildbot # [ 47.869380] systemd-logind[506]: New session '7' of user 'root' with class 'user' and type 'tty'.1496buildbot # [ 47.873439] systemd[1]: Started Session 7 of User root.1497buildbot # [ 47.916154] sshd-session[1267]: Received disconnect from ::1 port 57774:11: disconnected by user1498buildbot # [ 47.919240] sshd-session[1267]: Disconnected from user root ::1 port 577741499buildbot # [ 47.921752] sshd-session[1264]: pam_unix(sshd:session): session closed for user root1500buildbot # [ 47.933205] systemd[1]: session-7.scope: Deactivated successfully.1501buildbot # [ 47.937193] systemd-logind[506]: Session 7 logged out. Waiting for processes to exit.1502buildbot # [ 47.940349] systemd-logind[506]: Removed session 7.1503buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1504buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1505buildbot # Dload Upload Total Spent Left Speed1506buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 9303 0 0100 401 100 401 0 0 7578 0 0100 401 100 401 0 0 6395 0 01507buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1508buildbot # [ 48.140294] sshd-session[1274]: Accepted publickey for root from ::1 port 57784 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81509buildbot # [ 48.157504] sshd-session[1274]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1510buildbot # [ 48.169905] systemd-logind[506]: New session '8' of user 'root' with class 'user' and type 'tty'.1511buildbot # [ 48.172887] systemd[1]: Started Session 8 of User root.1512buildbot # [ 48.225453] sshd-session[1278]: Received disconnect from ::1 port 57784:11: disconnected by user1513buildbot # [ 48.227705] sshd-session[1278]: Disconnected from user root ::1 port 577841514buildbot # [ 48.229687] sshd-session[1274]: pam_unix(sshd:session): session closed for user root1515buildbot # [ 48.237176] systemd[1]: session-8.scope: Deactivated successfully.1516buildbot # [ 48.241267] systemd-logind[506]: Session 8 logged out. Waiting for processes to exit.1517buildbot # [ 48.244774] systemd-logind[506]: Removed session 8.1518buildbot # [ 48.252346] twistd[974]: 2026-08-30T07:51:20+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1519buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1520buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1521buildbot # Dload Upload Total Spent Left Speed1522buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 10061 0 0100 401 100 401 0 0 8079 0 0100 401 100 401 0 0 6755 0 01523buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1524buildbot # [ 49.982418] nix-daemon[1247]: accepted connection from pid 1291, user buildbot-worker1525buildbot # [ 50.047373] twistd[975]: 2026-08-30T07:51:21+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 4.7792541526buildbot # [ 50.055336] twistd[975]: 2026-08-30T07:51:21+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a3778a0>1527buildbot # [ 50.062865] twistd[974]: 2026-08-30T07:51:21+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01528buildbot # [ 50.103614] twistd[974]: 2026-08-30T07:51:22+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x751c43669940>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x751c4366acf0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x751c4366acf0>)]1529buildbot # [ 50.123337] twistd[974]: 2026-08-30T07:51:22+0000 [-] step 'Evaluate flake' complete: success (None)1530buildbot # [ 50.151255] twistd[974]: 2026-08-30T07:51:22+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1531buildbot # [ 50.165963] twistd[974]: 2026-08-30T07:51:22+0000 [-] step 'build flake' complete: success (None)1532buildbot # [ 50.179533] twistd[974]: 2026-08-30T07:51:22+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x751c436e7060>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x751c436e7110>)): []1533buildbot # [ 50.191787] twistd[974]: 2026-08-30T07:51:22+0000 [-] step 'Process skipped builds' complete: skipped (None)1534buildbot # [ 50.206442] twistd[974]: 2026-08-30T07:51:22+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1535buildbot # [ 50.210212] twistd[974]: 2026-08-30T07:51:22+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1536buildbot # [ 50.215056] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command 12): startCommand:shell1537buildbot # [ 50.217857] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1538buildbot # [ 50.221873] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1539buildbot # [ 50.227093] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1540buildbot # [ 50.233727] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1541buildbot # [ 50.237468] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1542buildbot # [ 50.242597] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1543buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1544buildbot # [ 50.259846] twistd[975]: 2026-08-30T07:51:22+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0272191545buildbot # [ 50.265413] twistd[975]: 2026-08-30T07:51:22+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a377ce0>1546buildbot # [ 50.292610] twistd[974]: 2026-08-30T07:51:22+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01547buildbot # [ 50.324931] twistd[974]: 2026-08-30T07:51:22+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1548buildbot # [ 50.338086] twistd[974]: 2026-08-30T07:51:22+0000 [-] step 'Cleanup drv paths' complete: success (None)1549buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1550buildbot # Dload Upload [ 50.366368] twistd[974]: 2026-08-30T07:51:22+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1551buildbot # [ 50.370706] twistd[974]: 2026-08-30T07:51:22+0000 [-] command '['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1552buildbot # [ 50.375557] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command 13): startCommand:shell1553buildbot # Total Spent Lef[ 50.383094] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1554buildbot # [ 50.387494] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 5ce38e099b231ed61b39c6f724f3b8875e5ffb78 --branch master --repo test-flake1555buildbot # [ 50.393111] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1556buildbot # [ 50.398504] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1557buildbot # t Speed1558buildbot # 0 [ 50.405167] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'5ce38e099b231ed61b39c6f724f3b8875e5ffb78', b'--branch', b'master', b'--repo', b'test-flake']1559buildbot # [ 50.411489] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1560buildbot # 0 0 0 0 0 0 0 0100 401 100 401 0 0 4165 0 0100 401 100 401 0 0 3622 0 0100 401 100 401 0 0 3221 0 01561buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.22 seconds)1562buildbot # [ 50.817685] nix-daemon[1247]: accepted connection from pid 1303, user buildbot-worker1563buildbot # [ 50.852365] twistd[975]: 2026-08-30T07:51:22+0000 [-] (command ['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4699911564buildbot # [ 50.858297] twistd[975]: 2026-08-30T07:51:22+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a427650>1565buildbot # [ 50.863810] twistd[974]: 2026-08-30T07:51:22+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']'> rc=01566buildbot # [ 50.902608] twistd[974]: 2026-08-30T07:51:22+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x751c436e75e0>, logEnviron=False)): []1567buildbot # [ 50.915601] twistd[974]: 2026-08-30T07:51:22+0000 [-] step 'Evaluate effects' complete: success (None)1568buildbot # [ 50.930777] twistd[974]: 2026-08-30T07:51:22+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1569buildbot # [ 50.940479] twistd[974]: 2026-08-30T07:51:22+0000 [-] step 'Buildbot effect' complete: success (None)1570buildbot # [ 50.953939] twistd[974]: 2026-08-30T07:51:22+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1571buildbot # [ 50.958442] twistd[974]: 2026-08-30T07:51:22+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1572buildbot # [ 50.963455] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command 14): startCommand:shell1573buildbot # [ 50.966642] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1574buildbot # [ 50.973175] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 5ce38e099b231ed61b39c6f724f3b8875e5ffb78 --branch master --repo test-flake1575buildbot # [ 50.979177] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1576buildbot # [ 50.984721] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1577buildbot # [ 50.989129] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'5ce38e099b231ed61b39c6f724f3b8875e5ffb78', b'--branch', b'master', b'--repo', b'test-flake']1578buildbot # [ 50.995741] twistd[975]: 2026-08-30T07:51:22+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1579buildbot # [ 51.350619] nix-daemon[1247]: accepted connection from pid 1312, user buildbot-worker1580buildbot # [ 51.384393] twistd[975]: 2026-08-30T07:51:23+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4113251581buildbot # [ 51.389588] twistd[975]: 2026-08-30T07:51:23+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74207a427950>1582buildbot # [ 51.395976] twistd[974]: 2026-08-30T07:51:23+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '5ce38e099b231ed61b39c6f724f3b8875e5ffb78', '--branch', 'master', '--repo', 'test-flake']'> rc=01583buildbot # [ 51.441055] twistd[974]: 2026-08-30T07:51:23+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x751c436681a0>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x751c436e78a0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x751c436e7950>, logEnviron=False)): []1584buildbot # [ 51.459804] twistd[974]: 2026-08-30T07:51:23+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1585buildbot # [ 51.462173] twistd[974]: 2026-08-30T07:51:23+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1586buildbot # [ 51.473134] twistd[974]: 2026-08-30T07:51:23+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1587buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1588buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1589buildbot # Dload Upload Total Spent Left Speed1590buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 11666 0 0100 411 100 411 0 0 9112 0 0100 411 100 411 0 0 7490 0 01591buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds)1592(finished: subtest: Wait for nix-eval build to complete, in 22.08 seconds)1593subtest: Schedule cache is created1594buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1595buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1596buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1597buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1598(finished: subtest: Schedule cache is created, in 0.06 seconds)1599subtest: Nightly schedulers are created1600buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1601buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1602buildbot # Dload Upload Total Spent Left Speed1603buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 44530 0 0100 3793 100 3793 0 0 39847 0 0100 3793 100 3793 0 0 36110 0 01604buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1605buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1606buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1607buildbot # Dload Upload Total Spent Left Speed1608buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 41268 0 0100 3793 100 3793 0 0 37192 0 0100 3793 100 3793 0 0 33933 0 01609buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.20 seconds)1610buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1611buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1612buildbot # Dload Upload Total Spent Left Speed1613buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 38619 0 0100 3793 100 3793 0 0 35044 0 0100 3793 100 3793 0 0 32139 0 01614buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds)1615buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1616buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1617buildbot # Dload Upload Total Spent Left Speed1618buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39347 0 0100 3793 100 3793 0 0 35468 0 0100 3793 100 3793 0 0 32498 0 01619buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds)1620buildbot # [ 56.436858] twistd[974]: 2026-08-30T07:51:28+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1621buildbot # [ 56.445695] twistd[974]: 2026-08-30T07:51:28+0000 [-] beginning configuration update1622buildbot # [ 56.451681] twistd[974]: 2026-08-30T07:51:28+0000 [-] Loading configuration from '/nix/store/6m528szw698gvgsikn6qm15ww7fgxlr9-master.cfg'1623buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1624buildbot # [ 56.519179] twistd[974]: 2026-08-30T07:51:28+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1625buildbot # [ 56.521745] twistd[974]: 2026-08-30T07:51:28+0000 [-] adding 1 new schedulers, removing 01626buildbot # [ 56.632424] twistd[974]: 2026-08-30T07:51:28+0000 [-] configuration update complete (took 0.188 seconds)1627buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1628buildbot # Dload Upload Total Spent Left Speed1629buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 46421 0 0100 4079 100 4079 0 0 41668 0 0100 4079 100 4079 0 0 37849 0 01630buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.27 seconds)1631buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1632buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1633buildbot # Dload Upload Total Spent Left Speed1634buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 40345 0 0100 4079 100 4079 0 0 36686 0 0100 4079 100 4079 0 0 33721 0 01635buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds)1636(finished: subtest: Nightly schedulers are created, in 5.22 seconds)1637subtest: Scheduled effect builder exists1638buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1639buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1640buildbot # Dload Upload Total Spent Left Speed1641buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 66282 0 0100 2371 100 2371 0 0 52034 0 0100 2371 100 2371 0 0 42858 0 01642buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.11 seconds)1643(finished: subtest: Scheduled effect builder exists, in 0.11 seconds)1644(finished: run the VM test script, in 58.29 seconds)1645test script finished in 58.34s1646cleanup1647kill QemuMachine (pid 45)1648buildbot # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14)1649(finished: cleanup, in 0.23 seconds)1650additionally exposed symbols:1651 buildbot,1652 vlan1,1653 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh