vm-test-run-buildbot-nix-gitea
checks.aarch64-linux.gitea
· build #62
· raw
1tribuchet: building on eliza2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit gitea.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 45)12buildbot # Formatting '/build/vm-state-buildbot/tmp.L2XdOiPGhI', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 9c30a27c-37f7-4ec0-9c81-3124c1867c8917buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40]27buildbot # [ 0.000000] Linux version 6.18.49 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Wed Sep 2 12:31:51 UTC 202628buildbot # [ 0.000000] KASLR enabled29buildbot # [ 0.000000] random: crng init done30buildbot # [ 0.000000] Machine model: linux,dummy-virt31buildbot # [ 0.000000] efi: UEFI not found.32buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT33buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]34buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded700-0x7fdf0e7f]35buildbot # [ 0.000000] Zone ranges:36buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]37buildbot # [ 0.000000] DMA32 empty38buildbot # [ 0.000000] Normal empty39buildbot # [ 0.000000] Device empty40buildbot # [ 0.000000] Movable zone start for each node41buildbot # [ 0.000000] Early memory node ranges42buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]43buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]44buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc0000045buildbot # [ 0.000000] psci: probing for conduit method from DT.46buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware.47buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs48buildbot # [ 0.000000] psci: Trusted OS migration not required49buildbot # [ 0.000000] psci: SMC Calling Convention v1.150buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)51buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186648 r8192 d116456 u31129652buildbot # [ 0.000000] Detected PIPT I-cache on CPU053buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm)54buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface55buildbot # [ 0.000000] CPU features: detected: Spectre-v456buildbot # [ 0.000000] CPU features: detected: Spectre-BHB57buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_3858buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_2359buildbot # [ 0.000000] alternatives: applying boot alternatives60buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/vk68xxwfdkn5px6ylp4i85764ja82fi3-nixos-system-buildbot-test/init regInfo=/nix/store/c63mmh2ajl994dnngnv7jkriz31bkppj-closure-info/registration console=ttyAMA0,115200n8 console=tty061buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/c63mmh2ajl994dnngnv7jkriz31bkppj-closure-info/registration", will be passed to user space.62buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes63buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)64buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)65buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB66buildbot # [ 0.000000] software IO TLB: area num 1.67buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB)68buildbot # [ 0.000000] Fallback order for Node 0: 069buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 26214470buildbot # [ 0.000000] Policy zone: DMA71buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off72buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=173buildbot # [ 0.000000] allocated 2097152 bytes of page_ext74buildbot # [ 0.000000] ftrace: allocating 74886 entries in 294 pages75buildbot # [ 0.000000] ftrace: allocated 294 pages with 4 groups76buildbot # [ 0.000000] rcu: Hierarchical RCU implementation.77buildbot # [ 0.000000] rcu: RCU event tracing is enabled.78buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.79buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled.80buildbot # [ 0.000000] Rude variant of Tasks RCU enabled.81buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled.82buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.83buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=184buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.85buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.86buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.87buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 088buildbot # [ 0.000000] GICv3: 256 SPIs implemented89buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented90buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq91buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI92buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=093buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a000094buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff]95buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44cf0000 (indirect, esz 8, psz 64K, shr 1)96buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44d00000 (flat, esz 8, psz 64K, shr 1)97buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d1000098buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d2000099buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.100buildbot # [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns101buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).102buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns103buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns104buildbot # [ 0.000027] arm-pv: using stolen time PV105buildbot # [ 0.000388] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)106buildbot # [ 0.000559] Console: colour dummy device 80x25107buildbot # [ 0.000567] printk: legacy console [tty0] enabled108buildbot # [ 0.000757] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000)109buildbot # [ 0.000764] pid_max: default: 32768 minimum: 301110buildbot # [ 0.000833] LSM: initializing lsm=capability,landlock,yama,bpf,ima111buildbot # [ 0.000959] landlock: Up and running.112buildbot # [ 0.000962] Yama: becoming mindful.113buildbot # [ 0.001389] LSM support for eBPF active114buildbot # [ 0.001512] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)115buildbot # [ 0.001532] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)116buildbot # [ 0.002544] cacheinfo: Unable to detect cache hierarchy for CPU 0117buildbot # [ 0.003303] rcu: Hierarchical SRCU implementation.118buildbot # [ 0.003307] rcu: Max phase no-delay instances is 1000.119buildbot # [ 0.004459] fsl-mc MSI: its@8080000 domain created120buildbot # [ 0.004557] EFI services will not be available.121buildbot # [ 0.004627] smp: Bringing up secondary CPUs ...122buildbot # [ 0.004634] smp: Brought up 1 node, 1 CPU123buildbot # [ 0.004638] SMP: Total of 1 processors activated.124buildbot # [ 0.004641] CPU: All CPU(s) started at EL1125buildbot # [ 0.004653] CPU features: detected: Branch Target Identification126buildbot # [ 0.004657] CPU features: detected: ARMv8.4 Translation Table Level127buildbot # [ 0.004660] CPU features: detected: Instruction cache invalidation not required for I/D coherence128buildbot # [ 0.004664] CPU features: detected: Data cache clean to the PoU not required for I/D coherence129buildbot # [ 0.004668] CPU features: detected: Common not Private translations130buildbot # [ 0.004671] CPU features: detected: CRC32 instructions131buildbot # [ 0.004674] CPU features: detected: Data cache clean to Point of Deep Persistence132buildbot # [ 0.004677] CPU features: detected: Data cache clean to Point of Persistence133buildbot # [ 0.004680] CPU features: detected: Data independent timing control (DIT)134buildbot # [ 0.004684] CPU features: detected: E0PD135buildbot # [ 0.004686] CPU features: detected: Enhanced Counter Virtualization136buildbot # [ 0.004689] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)137buildbot # [ 0.004693] CPU features: detected: Enhanced Virtualization Traps138buildbot # [ 0.004696] CPU features: detected: Fine Grained Traps139buildbot # [ 0.004699] CPU features: detected: Generic authentication (architected QARMA5 algorithm)140buildbot # [ 0.004704] CPU features: detected: RCpc load-acquire (LDAPR)141buildbot # [ 0.004707] CPU features: detected: LSE atomic instructions142buildbot # [ 0.004710] CPU features: detected: Privileged Access Never143buildbot # [ 0.004712] CPU features: detected: PMUv3144buildbot # [ 0.004715] CPU features: detected: RAS Extension Support145buildbot # [ 0.004718] CPU features: detected: RASv1p1 Extension Support146buildbot # [ 0.004720] CPU features: detected: Random Number Generator147buildbot # [ 0.004723] CPU features: detected: Speculation barrier (SB)148buildbot # [ 0.004725] CPU features: detected: Stage-2 Force Write-Back149buildbot # [ 0.004729] CPU features: detected: TLB range maintenance instructions150buildbot # [ 0.004733] CPU features: detected: Speculative Store Bypassing Safe (SSBS)151buildbot # [ 0.004770] alternatives: applying system-wide alternatives152buildbot # [ 0.007657] CPU features: detected: BBM Level 2 without TLB conflict abort153buildbot # [ 0.007804] Memory: 894300K/1048576K available (24448K kernel code, 7090K rwdata, 26344K rodata, 4736K init, 1107K bss, 112948K reserved, 32768K cma-reserved)154buildbot # [ 0.008154] devtmpfs: initialized155buildbot # [ 0.009837] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)156buildbot # [ 0.009858] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).157buildbot # [ 0.010030] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL158buildbot # [ 0.010034] 0 pages in range for non-PLT usage159buildbot # [ 0.010035] 508288 pages in range for PLT usage160buildbot # [ 0.010144] pinctrl core: initialized pinctrl subsystem161buildbot # [ 0.010867] DMI not present or invalid.162buildbot # [ 0.013899] NET: Registered PF_NETLINK/PF_ROUTE protocol family163buildbot # [ 0.016221] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations164buildbot # [ 0.016375] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations165buildbot # [ 0.016543] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations166buildbot # [ 0.016565] audit: initializing netlink subsys (disabled)167buildbot # [ 0.017175] thermal_sys: Registered thermal governor 'fair_share'168buildbot # [ 0.017177] thermal_sys: Registered thermal governor 'bang_bang'169buildbot # [ 0.017181] thermal_sys: Registered thermal governor 'step_wise'170buildbot # [ 0.017184] thermal_sys: Registered thermal governor 'user_space'171buildbot # [ 0.017189] thermal_sys: Registered thermal governor 'power_allocator'172buildbot # [ 0.017212] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1173buildbot # [ 0.017222] cpuidle: using governor ladder174buildbot # [ 0.017228] cpuidle: using governor menu175buildbot # [ 0.017412] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers.176buildbot # [ 0.017427] ASID allocator initialised with 65536 entries177buildbot # [ 0.018581] Serial: AMBA PL011 UART driver178buildbot # [ 0.023589] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1179buildbot # [ 0.023742] printk: console [ttyAMA0] enabled180buildbot # [ 0.144265] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages181buildbot # [ 0.144281] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page182buildbot # [ 0.144286] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages183buildbot # [ 0.144290] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page184buildbot # [ 0.144295] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages185buildbot # [ 0.144299] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page186buildbot # [ 0.144303] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages187buildbot # [ 0.144307] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page188buildbot # [ 0.151618] fbcon: Taking over console189buildbot # [ 0.151632] ACPI: Interpreter disabled.190buildbot # [ 0.153517] iommu: Default domain type: Translated191buildbot # [ 0.153527] iommu: DMA domain TLB invalidation policy: strict mode192buildbot # [ 0.155170] SCSI subsystem initialized193buildbot # [ 0.160581] usbcore: registered new interface driver usbfs194buildbot # [ 0.160612] usbcore: registered new interface driver hub195buildbot # [ 0.160628] usbcore: registered new device driver usb196buildbot # [ 0.160901] pps_core: LinuxPPS API ver. 1 registered197buildbot # [ 0.160908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>198buildbot # [ 0.160918] PTP clock support registered199buildbot # [ 0.160965] EDAC MC: Ver: 3.0.0200buildbot # [ 0.165529] scmi_core: SCMI protocol bus registered201buildbot # [ 0.166503] FPGA manager framework202buildbot # [ 0.167471] vgaarb: loaded203buildbot # [ 0.168072] clocksource: Switched to clocksource arch_sys_counter204buildbot # [ 0.174278] VFS: Disk quotas dquot_6.6.0205buildbot # [ 0.174323] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)206buildbot # [ 0.175911] netfs: FS-Cache loaded207buildbot # [ 0.176026] pnp: PnP ACPI: disabled208buildbot # [ 0.179828] NET: Registered PF_INET protocol family209buildbot # [ 0.179982] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)210buildbot # [ 0.208600] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)211buildbot # [ 0.208637] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)212buildbot # [ 0.208659] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)213buildbot # [ 0.208699] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)214buildbot # [ 0.208775] TCP: Hash tables configured (established 8192 bind 8192)215buildbot # [ 0.208844] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)216buildbot # [ 0.208898] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)217buildbot # [ 0.208945] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)218buildbot # [ 0.209027] NET: Registered PF_UNIX/PF_LOCAL protocol family219buildbot # [ 0.209046] NET: Registered PF_XDP protocol family220buildbot # [ 0.209064] PCI: CLS 0 bytes, default 64221buildbot # [ 0.209282] Trying to unpack rootfs image as initramfs...222buildbot # [ 0.225568] kvm [1]: HYP mode not available223buildbot # [ 0.310352] Initialise system trusted keyrings224buildbot # [ 0.311041] workingset: timestamp_bits=42 max_order=18 bucket_order=0225buildbot # [ 0.312289] squashfs: version 4.0 (2009/01/31) Phillip Lougher226buildbot # [ 0.320124] 9p: Installing v9fs 9p2000 file system support227buildbot # [ 0.340065] Key type asymmetric registered228buildbot # [ 0.340088] Asymmetric key parser 'x509' registered229buildbot # [ 0.340138] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)230buildbot # [ 0.342237] io scheduler mq-deadline registered231buildbot # [ 0.342247] io scheduler kyber registered232buildbot # [ 0.356176] pl061_gpio 9030000.pl061: PL061 GPIO chip registered233buildbot # [ 0.356787] ledtrig-cpu: registered to indicate activity on CPUs234buildbot # [ 0.357158] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:235buildbot # [ 0.357175] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000236buildbot # [ 0.357190] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000237buildbot # [ 0.357199] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000238buildbot # [ 0.357220] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits239buildbot # [ 0.357243] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]240buildbot # [ 0.357310] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00241buildbot # [ 0.357319] pci_bus 0000:00: root bus resource [bus 00-ff]242buildbot # [ 0.357325] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]243buildbot # [ 0.357331] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]244buildbot # [ 0.357336] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]245buildbot # [ 0.357398] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint246buildbot # [ 0.357830] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint247buildbot # [ 0.358013] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f]248buildbot # [ 0.358030] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]249buildbot # [ 0.358059] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]250buildbot # [ 0.358075] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]251buildbot # [ 0.358518] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint252buildbot # [ 0.358698] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f]253buildbot # [ 0.358715] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]254buildbot # [ 0.358744] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]255buildbot # [ 0.359182] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint256buildbot # [ 0.359361] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f]257buildbot # [ 0.359377] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]258buildbot # [ 0.359406] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]259buildbot # [ 0.359843] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint260buildbot # [ 0.360021] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f]261buildbot # [ 0.360037] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]262buildbot # [ 0.360067] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]263buildbot # [ 0.360553] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint264buildbot # [ 0.360733] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f]265buildbot # [ 0.360749] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]266buildbot # [ 0.360778] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]267buildbot # [ 0.361226] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint268buildbot # [ 0.361405] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f]269buildbot # [ 0.361421] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]270buildbot # [ 0.361450] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]271buildbot # [ 0.361919] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint272buildbot # [ 0.362098] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f]273buildbot # [ 0.362114] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff]274buildbot # [ 0.362143] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]275buildbot # [ 0.362159] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref]276buildbot # [ 0.362601] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint277buildbot # [ 0.362784] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]278buildbot # [ 0.362814] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]279buildbot # [ 0.363251] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint280buildbot # [ 0.363432] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]281buildbot # [ 0.363462] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]282buildbot # [ 0.363837] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint283buildbot # [ 0.364014] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff]284buildbot # [ 0.412335] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint285buildbot # [ 0.412609] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f]286buildbot # [ 0.412627] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]287buildbot # [ 0.412657] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]288buildbot # [ 0.413107] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint289buildbot # [ 0.413286] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f]290buildbot # [ 0.413301] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]291buildbot # [ 0.413331] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]292buildbot # [ 0.413889] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned293buildbot # [ 0.413900] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned294buildbot # [ 0.413906] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned295buildbot # [ 0.413950] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned296buildbot # [ 0.413997] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned297buildbot # [ 0.414044] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned298buildbot # [ 0.414091] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned299buildbot # [ 0.414138] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned300buildbot # [ 0.414186] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned301buildbot # [ 0.414233] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned302buildbot # [ 0.414280] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned303buildbot # [ 0.414328] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned304buildbot # [ 0.414388] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned305buildbot # [ 0.414433] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned306buildbot # [ 0.414454] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned307buildbot # [ 0.414475] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned308buildbot # [ 0.414496] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned309buildbot # [ 0.414518] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned310buildbot # [ 0.414542] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned311buildbot # [ 0.414564] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned312buildbot # [ 0.414585] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned313buildbot # [ 0.414607] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned314buildbot # [ 0.414629] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned315buildbot # [ 0.414651] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned316buildbot # [ 0.414673] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned317buildbot # [ 0.414694] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned318buildbot # [ 0.414716] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned319buildbot # [ 0.414737] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned320buildbot # [ 0.414758] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned321buildbot # [ 0.414779] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned322buildbot # [ 0.414800] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned323buildbot # [ 0.414821] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned324buildbot # [ 0.414843] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned325buildbot # [ 0.414864] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned326buildbot # [ 0.414890] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]327buildbot # [ 0.414899] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]328buildbot # [ 0.414904] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]329buildbot # [ 0.416036] pci 0000:00:0a.0: enabling device (0000 -> 0002)330buildbot # [ 0.453844] pci 0000:00:0a.0: quirk_usb_early_handoff+0x0/0xa60 took 36928 usecs331buildbot # [ 0.478734] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)332buildbot # [ 0.484747] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)333buildbot # [ 0.486705] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)334buildbot # [ 0.497046] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)335buildbot # [ 0.498929] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)336buildbot # [ 0.502352] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)337buildbot # [ 0.508523] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003)338buildbot # [ 0.511905] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)339buildbot # [ 0.522931] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)340buildbot # [ 0.528571] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)341buildbot # [ 0.530656] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)342buildbot # [ 0.543683] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled343buildbot # [ 0.549502] msm_serial: driver initialized344buildbot # [ 0.549645] SuperH (H)SCI(F) driver initialized345buildbot # [ 0.549699] STM32 USART driver initialized346buildbot # [ 0.582399] loop: module loaded347buildbot # [ 0.582566] virtio_blk virtio5: 1/0/0 default/read/poll queues348buildbot # [ 0.583286] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)349buildbot # [ 0.588755] megasas: 07.734.00.00-rc1350buildbot # [ 0.589436] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]351buildbot # [ 0.591179] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000352buildbot # [ 0.591198] Intel/Sharp Extended Query Table at 0x0031353buildbot # [ 0.600837] Using buffer write method354buildbot # [ 0.600898] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]355buildbot # [ 0.602355] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000356buildbot # [ 0.602385] Intel/Sharp Extended Query Table at 0x0031357buildbot # [ 0.603953] Using buffer write method358buildbot # [ 0.603979] Concatenating MTD devices:359buildbot # [ 0.603983] (0): "0.flash"360buildbot # [ 0.603987] (1): "0.flash"361buildbot # [ 0.603991] into device "0.flash"362buildbot # [ 0.822766] Freeing initrd memory: 26088K363buildbot # [ 0.828751] tun: Universal TUN/TAP device driver, 1.6364buildbot # [ 0.832348] thunder_xcv, ver 1.0365buildbot # [ 0.832381] thunder_bgx, ver 1.0366buildbot # [ 0.832403] nicpf, ver 1.0367buildbot # [ 0.832958] e1000: Intel(R) PRO/1000 Network Driver368buildbot # [ 0.832966] e1000: Copyright (c) 1999-2006 Intel Corporation.369buildbot # [ 0.832993] e1000e: Intel(R) PRO/1000 Network Driver370buildbot # [ 0.833001] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.371buildbot # [ 0.833026] igb: Intel(R) Gigabit Ethernet Network Driver372buildbot # [ 0.833031] igb: Copyright (c) 2007-2014 Intel Corporation.373buildbot # [ 0.833052] igbvf: Intel(R) Gigabit Virtual Function Network Driver374buildbot # [ 0.833058] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.375buildbot # [ 0.833190] sky2: driver version 1.30376buildbot # [ 0.834790] usbcore: registered new interface driver usb-storage377buildbot # [ 0.834834] usbcore: registered new interface driver usbserial_generic378buildbot # [ 0.834848] usbserial: USB Serial support registered for generic379buildbot # [ 0.835442] hv_vmbus: registering driver hyperv_keyboard380buildbot # [ 0.836723] ehci-pci 0000:00:0a.0: EHCI Host Controller381buildbot # [ 0.836748] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1382buildbot # [ 0.836982] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000383buildbot # [ 0.849255] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00384buildbot # [ 0.849657] hub 1-0:1.0: USB hub found385buildbot # [ 0.849676] hub 1-0:1.0: 6 ports detected386buildbot # [ 0.851837] rtc-pl031 9010000.pl031: registered as rtc0387buildbot # [ 0.851864] rtc-pl031 9010000.pl031: setting system clock to 2026-09-06T07:07:01 UTC (1788678421)388buildbot # [ 0.853966] i2c_dev: i2c /dev entries driver389buildbot # [ 0.857251] sdhci: Secure Digital Host Controller Interface driver390buildbot # [ 0.857261] sdhci: Copyright(c) Pierre Ossman391buildbot # [ 0.857533] Synopsys Designware Multimedia Card Interface Driver392buildbot # [ 0.857914] sdhci-pltfm: SDHCI platform and OF driver helper393buildbot # [ 0.859605] hid: raw HID events driver (C) Jiri Kosina394buildbot # [ 0.859848] usbcore: registered new interface driver usbhid395buildbot # [ 0.859854] usbhid: USB HID core driver396buildbot # [ 0.865425] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available397buildbot # [ 0.866949] drop_monitor: Initializing network drop monitor service398buildbot # [ 0.867067] NET: Registered PF_INET6 protocol family399buildbot # [ 0.870172] Segment Routing with IPv6400buildbot # [ 0.870191] In-situ OAM (IOAM) with IPv6401buildbot # [ 0.870222] NET: Registered PF_PACKET protocol family402buildbot # [ 0.871847] 9pnet: Installing 9P2000 support403buildbot # [ 0.874594] Key type dns_resolver registered404buildbot # [ 0.880985] registered taskstats version 1405buildbot # [ 0.881144] Loading compiled-in X.509 certificates406buildbot # [ 0.889383] Demotion targets for Node 0: null407buildbot # [ 0.889485] Key type .fscrypt registered408buildbot # [ 0.889492] Key type fscrypt-provisioning registered409buildbot # [ 0.889589] ima: No TPM chip found, activating TPM-bypass!410buildbot # [ 0.889608] ima: Allocated hash algorithm: sha1411buildbot # [ 0.889629] ima: No architecture policies found412buildbot # [ 0.893578] input: gpio-keys as /devices/platform/gpio-keys/input/input0413buildbot # [ 0.911480] clk: Disabling unused clocks414buildbot # [ 0.911501] PM: genpd: Disabling unused power domains415buildbot # [ 0.915653] Freeing unused kernel memory: 4736K416buildbot # [ 0.915847] Run /init as init process417buildbot # [ 0.930231] systemd[1]: Successfully made /usr/ read-only.418buildbot # [ 1.096142] usb 1-1: new high-speed USB device number 2 using ehci-pci419buildbot # [ 1.248389] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1420buildbot # [ 1.264680] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)421buildbot # [ 1.276504] systemd[1]: Detected virtualization qemu.422buildbot # [ 1.278553] systemd[1]: Detected architecture arm64.423buildbot # [ 1.280478] systemd[1]: Running in initrd.424buildbot # [ 1.282945] systemd[1]: Initializing machine ID from random generator.425buildbot # [ 1.285971] systemd[1]: Hostname set to <buildbot>.426buildbot # [ 1.328354] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0427buildbot # [ 1.448105] usb 1-2: new high-speed USB device number 3 using ehci-pci428buildbot # [ 1.587388] systemd[1]: bpf-restrict-fs: LSM BPF program attached429buildbot # [ 1.606713] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2430buildbot # [ 1.611800] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0431buildbot # [ 1.701472] systemd[1]: Queued start job for default target Initrd Default Target.432buildbot # [ 1.710371] systemd[1]: Created slice Slice /system/modprobe.433buildbot # [ 1.711520] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.434buildbot # [ 1.712911] systemd[1]: Expecting device /dev/disk/by-label/nixos...435buildbot # [ 1.713954] systemd[1]: Reached target Path Units.436buildbot # [ 1.714757] systemd[1]: Reached target Slice Units.437buildbot # [ 1.715571] systemd[1]: Reached target Swaps.438buildbot # [ 1.716368] systemd[1]: Reached target Timer Units.439buildbot # [ 1.717421] systemd[1]: Listening on D-Bus System Message Bus Socket.440buildbot # [ 1.718625] systemd[1]: Listening on Journal Socket (/dev/log).441buildbot # [ 1.719736] systemd[1]: Listening on Journal Sockets.442buildbot # [ 1.720783] systemd[1]: Listening on udev Control Socket.443buildbot # [ 1.720899] systemd[1]: Listening on udev Kernel Socket.444buildbot # [ 1.720921] systemd[1]: Reached target Socket Units.445buildbot # [ 1.724972] systemd[1]: Starting Create List of Static Device Nodes...446buildbot # [ 1.735092] systemd[1]: Starting Load Kernel Module 9pnet_virtio...447buildbot # [ 1.736385] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs448buildbot # [ 1.749507] systemd[1]: Mounting Kernel Configuration File System...449buildbot # [ 1.768321] systemd[1]: Starting Journal Service...450buildbot # [ 1.775809] systemd[1]: Starting Load Kernel Modules...451buildbot # [ 1.776922] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os452buildbot # [ 1.790204] systemd[1]: Starting Coldplug All udev Devices...453buildbot # [ 1.816204] systemd[1]: Finished Create List of Static Device Nodes.454buildbot # [ 1.817289] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.455buildbot # [ 1.817562] systemd[1]: Finished Load Kernel Module 9pnet_virtio.456buildbot # [ 1.828540] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...457buildbot # [ 1.828830] systemd[1]: Mounted Kernel Configuration File System.458buildbot # [ 1.835305] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.459buildbot # [ 1.841024] systemd-journald[73]: Collecting audit messages is disabled.460buildbot # [ 1.841885] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev461buildbot # [ 1.859720] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0462buildbot # [ 1.859951] [drm] features: -virgl +edid -resource_blob -host_visible463buildbot # [ 1.859961] [drm] features: -context_init464buildbot # [ 1.872778] [drm] number of scanouts: 1465buildbot # [ 1.872808] [drm] number of cap sets: 0466buildbot # [ 1.875121] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic467buildbot # [ 1.875138] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0468buildbot # [ 1.882447] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.469buildbot # [ 1.892502] systemd[1]: Starting Create Static Device Nodes in /dev...470buildbot # [ 1.908573] Console: switching to colour frame buffer device 160x50471buildbot # [ 1.914856] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device472buildbot # [ 1.932210] systemd[1]: Finished Create Static Device Nodes in /dev.473buildbot # [ 1.932391] systemd[1]: Reached target Preparation for Local File Systems.474buildbot # [ 1.932423] systemd[1]: Reached target Local File Systems.475buildbot # [ 1.936229] systemd[1]: Starting Rule-based Manager for Device Events and Files...476buildbot # [ 1.956274] systemd[1]: Finished Load Kernel Modules.477buildbot # [ 1.965290] systemd[1]: Starting Apply Kernel Variables...478buildbot # [ 2.012657] systemd[1]: Finished Apply Kernel Variables.479buildbot # [ 2.018690] systemd[1]: Started Journal Service.480buildbot # [ 2.015738] systemd-modules-load[74]: Inserted module 'dm_mod'481buildbot # [ 2.020195] systemd-modules-load[74]: Module 'virtio_balloon' is built in482buildbot # [ 2.021327] systemd-modules-load[74]: Module 'virtio_console' is built in483buildbot # [ 2.022418] systemd-modules-load[74]: Inserted module 'virtio_gpu'484buildbot # [ 2.023406] systemd-modules-load[74]: Module 'virtio_rng' is built in485buildbot # [ 2.036377] systemd[1]: Starting Create System Files and Directories...486buildbot # [ 2.041809] systemd-udevd[80]: Using default interface naming scheme 'v261'.487buildbot # [ 2.052139] systemd[1]: Finished Create System Files and Directories.488buildbot # [ 2.070731] systemd[1]: Started Rule-based Manager for Device Events and Files.489buildbot # [ 2.128119] systemd[1]: Starting Virtual Console Setup...490buildbot # [ 2.177106] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones.491buildbot # [ 2.179590] systemd[1]: Finished Virtual Console Setup.492buildbot # [ 2.785330] systemd[1]: Finished Coldplug All udev Devices.493buildbot # [ 2.786261] systemd[1]: Reached target System Initialization.494buildbot # [ 2.787073] systemd[1]: Reached target Basic System.495buildbot # [ 2.923779] (udev-worker)[98]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.496buildbot # [ 2.960781] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line.497buildbot # [ 2.963157] (udev-worker)[98]: Network interface NamePolicy= disabled on kernel command line.498buildbot # [ 3.016180] systemd[1]: Found device /dev/disk/by-label/nixos.499buildbot # [ 3.018441] systemd[1]: Reached target Initrd Root Device.500buildbot # [ 3.021898] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...501buildbot # [ 3.072689] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks502buildbot # [ 3.079813] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.503buildbot # [ 3.084641] systemd[1]: Mounting /sysroot...504buildbot # [ 3.134104] EXT4-fs (vda): mounted filesystem 9c30a27c-37f7-4ec0-9c81-3124c1867c89 r/w with ordered data mode. Quota mode: none.505buildbot # [ 3.123033] systemd[1]: Mounted /sysroot.506buildbot # [ 3.124637] systemd[1]: Reached target Initrd Root File System.507buildbot # [ 3.128470] systemd[1]: Starting Mountpoints Configured in the Real Root...508buildbot # [ 3.147555] systemd-sysroot-fstab-check[120]: /sysroot should be mounted in the initrd, will request daemon-reload.509buildbot # [ 3.154808] systemd[1]: Reload requested from client PID 120 ('systemd-sysroot') (unit initrd-parse-etc.service)...510buildbot # [ 3.158865] systemd[1]: Reloading...511buildbot # [ 3.359243] systemd[1]: Reloading finished in 202 ms.512buildbot # [ 3.390033] systemd-sysroot-fstab-check[120]: Requesting initrd-fs.target/start/replace...513buildbot # [ 3.393804] systemd-sysroot-fstab-check[120]: Requesting swap.target/start/replace...514buildbot # [ 3.400969] systemd[1]: Starting Load Kernel Module 9pnet_virtio...515buildbot # [ 3.406209] systemd[1]: initrd-parse-etc.service: Deactivated successfully.516buildbot # [ 3.408225] systemd[1]: Finished Mountpoints Configured in the Real Root.517buildbot # [ 3.412059] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.518buildbot # [ 3.431288] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.519buildbot # [ 3.433883] systemd[1]: Finished Load Kernel Module 9pnet_virtio.520buildbot # [ 3.779465] systemd[1]: Mounting /sysroot/nix/.ro-store...521buildbot # [ 3.795008] systemd[1]: Mounting /sysroot/nix/.rw-store...522buildbot # [ 3.798581] systemd[1]: Mounting /sysroot/run...523buildbot # [ 3.830366] systemd[1]: Mounting /sysroot/tmp/shared...524buildbot # [ 3.842262] systemd[1]: Mounting /sysroot/tmp/xchg...525buildbot # [ 3.862387] systemd[1]: Mounted /sysroot/nix/.ro-store.526buildbot # [ 3.873116] systemd[1]: Mounted /sysroot/nix/.rw-store.527buildbot # [ 3.875100] systemd[1]: Mounted /sysroot/run.528buildbot # [ 3.892848] systemd[1]: Starting rw-sysroot-nix-store.service...529buildbot # [ 3.903103] systemd[1]: Mounted /sysroot/tmp/shared.530buildbot # [ 3.914563] systemd[1]: Mounted /sysroot/tmp/xchg.531buildbot # [ 3.917097] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.532buildbot # [ 3.920219] systemd[1]: Finished rw-sysroot-nix-store.service.533buildbot # [ 3.930268] systemd[1]: Mounting /sysroot/nix/store...534buildbot # [ 3.965286] systemd[1]: Mounted /sysroot/nix/store.535buildbot # [ 3.967450] systemd[1]: Reached target Initrd File Systems.536buildbot # [ 3.972128] systemd[1]: Starting Find NixOS closure...537buildbot # [ 3.981607] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...538buildbot # [ 4.009903] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.539buildbot # [ 4.028321] systemd[1]: Finished Find NixOS closure.540buildbot # [ 4.029707] systemd[1]: Reached target Initrd Default Target.541buildbot # [ 4.033900] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...542buildbot # [ 4.062571] systemd[1]: Stopped target Initrd Default Target.543buildbot # [ 4.063603] systemd[1]: Stopped target Basic System.544buildbot # [ 4.064831] systemd[1]: Stopped target Initrd Root Device.545buildbot # [ 4.068472] systemd[1]: Stopped target Path Units.546buildbot # [ 4.069887] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.547buildbot # [ 4.073263] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.548buildbot # [ 4.076811] systemd[1]: Stopped target Slice Units.549buildbot # [ 4.081277] systemd[1]: Stopped target Socket Units.550buildbot # [ 4.082051] systemd[1]: Stopped target System Initialization.551buildbot # [ 4.083386] systemd[1]: Stopped target Swaps.552buildbot # [ 4.085404] systemd[1]: Stopped target Timer Units.553buildbot # [ 4.088903] systemd[1]: dbus.socket: Deactivated successfully.554buildbot # [ 4.092758] systemd[1]: Closed D-Bus System Message Bus Socket.555buildbot # [ 4.094706] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.556buildbot # [ 4.097677] systemd[1]: Stopped Find NixOS closure.557buildbot # [ 4.100654] systemd[1]: Starting Load Kernel Module 9pnet_virtio...558buildbot # [ 4.108263] systemd[1]: Starting rw-sysroot-nix-store.service...559buildbot # [ 4.112361] systemd[1]: systemd-sysctl.service: Deactivated successfully.560buildbot # [ 4.114712] systemd[1]: Stopped Apply Kernel Variables.561buildbot # [ 4.116270] systemd[1]: systemd-modules-load.service: Deactivated successfully.562buildbot # [ 4.123949] systemd[1]: Stopped Load Kernel Modules.563buildbot # [ 4.128314] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.564buildbot # [ 4.129468] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.565buildbot # [ 4.130638] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.566buildbot # [ 4.131636] systemd[1]: Stopped Create System Files and Directories.567buildbot # [ 4.142423] systemd[1]: Stopped target Local File Systems.568buildbot # [ 4.144375] systemd[1]: Stopped target Preparation for Local File Systems.569buildbot # [ 4.146497] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.570buildbot # [ 4.151230] systemd[1]: Stopped Coldplug All udev Devices.571buildbot # [ 4.152469] systemd[1]: Stopping Rule-based Manager for Device Events and Files...572buildbot # [ 4.153593] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.573buildbot # [ 4.155036] systemd[1]: Stopped Virtual Console Setup.574buildbot # [ 4.155796] systemd[1]: initrd-cleanup.service: Deactivated successfully.575buildbot # [ 4.156877] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.576buildbot # [ 4.157768] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.577buildbot # [ 4.158747] systemd[1]: Finished Load Kernel Module 9pnet_virtio.578buildbot # [ 4.159575] systemd[1]: systemd-udevd.service: Deactivated successfully.579buildbot # [ 4.168208] systemd[1]: Stopped Rule-based Manager for Device Events and Files.580buildbot # [ 4.169254] systemd[1]: systemd-udevd.service: Consumed 1.094s CPU time over 2.221s wall clock time, 17.5M memory peak.581buildbot # [ 4.170848] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.582buildbot # [ 4.176221] systemd[1]: Finished rw-sysroot-nix-store.service.583buildbot # [ 4.177088] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.584buildbot # [ 4.178049] systemd[1]: Closed udev Control Socket.585buildbot # [ 4.178730] systemd[1]: Starting Cleanup udev Database...586buildbot # [ 4.179492] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.587buildbot # [ 4.184498] systemd[1]: Stopped Create Static Device Nodes in /dev.588buildbot # [ 4.185421] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.589buildbot # [ 4.186525] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.590buildbot # [ 4.188086] systemd[1]: kmod-static-nodes.service: Deactivated successfully.591buildbot # [ 4.192365] systemd[1]: Stopped Create List of Static Device Nodes.592buildbot # [ 4.203716] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.593buildbot # [ 4.208507] systemd[1]: Finished Cleanup udev Database.594buildbot # [ 4.209275] systemd[1]: Reached target Switch Root.595buildbot # [ 4.209966] systemd[1]: Starting NixOS Activation...596buildbot # [ 4.361003] initrd-nixos-activation-start[172]: booting system configuration /nix/store/vk68xxwfdkn5px6ylp4i85764ja82fi3-nixos-system-buildbot-test597buildbot # [ 4.422686] initrd-nixos-activation-start[172]: running activation script...598buildbot # [ 4.827764] initrd-nixos-activation-start[195]: setting up /etc...599buildbot # [ 5.082917] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.600buildbot # [ 5.085613] systemd[1]: Finished NixOS Activation.601buildbot # [ 5.088203] systemd[1]: Starting Switch Root...602buildbot # [ 5.106467] systemd[1]: Switching root.603buildbot # [ 5.299146] systemd-journald[73]: Received SIGTERM from PID 1 (systemd).604buildbot # [ 5.898883] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)605buildbot # [ 5.910925] systemd[1]: Detected virtualization qemu.606buildbot # [ 5.913981] systemd[1]: Detected architecture arm64.607buildbot # [ 5.916867] systemd[1]: Detected first boot.608buildbot # [ 5.924167] systemd[1]: Initializing machine ID from random generator.609buildbot # [ 6.245963] systemd[1]: bpf-restrict-fs: LSM BPF program attached610buildbot # [ 6.426976] systemd[1]: Applying preset policy.611buildbot # [ 6.918266] systemd[1]: Populated /etc with preset unit settings.612buildbot # [ 7.422227] systemd[1]: initrd-switch-root.service: Deactivated successfully.613buildbot # [ 7.423521] systemd[1]: Stopped initrd-switch-root.service.614buildbot # [ 7.427158] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.615buildbot # [ 7.431379] systemd[1]: Created slice Slice /system/getty.616buildbot # [ 7.433501] systemd[1]: Created slice User and Session Slice.617buildbot # [ 7.434730] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.618buildbot # [ 7.436552] systemd[1]: Started Forward Password Requests to Wall Directory Watch.619buildbot # [ 7.438131] systemd[1]: Expecting device /dev/hvc0...620buildbot # [ 7.439467] systemd[1]: Expecting device /dev/ttyAMA0...621buildbot # [ 7.440989] systemd[1]: Reached target Local Encrypted Volumes.622buildbot # [ 7.442441] systemd[1]: Stopped target initrd-fs.target.623buildbot # [ 7.443816] systemd[1]: Stopped target initrd-root-fs.target.624buildbot # [ 7.445283] systemd[1]: Stopped target initrd-switch-root.target.625buildbot # [ 7.446750] systemd[1]: Reached target Virtual Machines and Containers.626buildbot # [ 7.448374] systemd[1]: Reached target Path Units.627buildbot # [ 7.449713] systemd[1]: Reached target Remote File Systems.628buildbot # [ 7.451161] systemd[1]: Reached target Slice Units.629buildbot # [ 7.452594] systemd[1]: Reached target Swaps.630buildbot # [ 7.456894] systemd[1]: Listening on Query the User Interactively for a Password.631buildbot # [ 7.461550] systemd[1]: Listening on Process Core Dump Socket.632buildbot # [ 7.465315] systemd[1]: Listening on Credential Encryption/Decryption.633buildbot # [ 7.469080] systemd[1]: Listening on Factory Reset Management.634buildbot # [ 7.470286] systemd[1]: Listening on Hostname Service Socket.635buildbot # [ 7.475557] systemd[1]: Starting Journal Log Access Socket...636buildbot # [ 7.477679] systemd[1]: Listening on Journal Audit Socket.637buildbot # [ 7.481590] systemd[1]: Listening on Console Output Muting Service Socket.638buildbot # [ 7.483080] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.639buildbot # [ 7.484624] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os640buildbot # [ 7.487340] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki641buildbot # [ 7.498385] systemd[1]: Listening on Disk Repartitioning Service Socket.642buildbot # [ 7.500499] systemd[1]: Listening on udev Control Socket.643buildbot # [ 7.501656] systemd[1]: Listening on udev Varlink Socket.644buildbot # [ 7.506247] systemd[1]: Mounting Huge Pages File System...645buildbot # [ 7.511331] systemd[1]: Mounting POSIX Message Queue File System...646buildbot # [ 7.519324] systemd[1]: Mounting Kernel Debug File System...647buildbot # [ 7.527291] systemd[1]: Mounting Kernel Trace File System...648buildbot # [ 7.547260] systemd[1]: Starting Create List of Static Device Nodes...649buildbot # [ 7.558241] systemd[1]: Starting Load Kernel Module 9pnet_virtio...650buildbot # [ 7.559543] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs651buildbot # [ 7.572868] systemd[1]: Mounting Kernel Configuration File System...652buildbot # [ 7.574240] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm653buildbot # [ 7.576349] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore654buildbot # [ 7.592358] systemd[1]: Starting Load Kernel Module fuse...655buildbot # [ 7.593880] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67656buildbot # [ 7.685304] systemd[1]: Starting Journal Service...657buildbot # [ 7.715046] systemd[1]: Starting Load Kernel Modules...658buildbot # [ 7.735587] fuse: init (API version 7.45)659buildbot # [ 7.762299] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...660buildbot # [ 7.786003] systemd[1]: Starting Remount Root and Kernel File Systems...661buildbot # [ 7.789091] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os662buildbot # [ 7.810738] systemd[1]: Starting Coldplug All udev Devices...663buildbot # [ 7.819373] systemd-journald[267]: Collecting audit messages is enabled.664buildbot # [ 7.811912] systemd[1]: Queued start job for default target Multi-User System.665buildbot # [ 7.830640] systemd[1]: Started Journal Service.666buildbot # [ 7.821425] systemd[1]: systemd-journald.service: Deactivated successfully.667buildbot # [ 7.827898] systemd-modules-load[268]: Module 'atkbd' is built in668buildbot # [ 7.832073] systemd-modules-load[268]: Module 'loop' is built in669buildbot # [ 7.835706] systemd-modules-load[268]: Inserted module 'tls'670buildbot # [ 7.841411] systemd[1]: Listening on Journal Log Access Socket.671buildbot # [ 7.849136] systemd[1]: Mounted Huge Pages File System.672buildbot # [ 7.855265] systemd[1]: Mounted POSIX Message Queue File System.673buildbot # [ 7.861145] systemd[1]: Mounted Kernel Debug File System.674buildbot # [ 7.865879] systemd[1]: Mounted Kernel Trace File System.675buildbot # [ 7.886079] EXT4-fs (vda): re-mounted 9c30a27c-37f7-4ec0-9c81-3124c1867c89.676buildbot # [ 7.875212] systemd[1]: Finished Create List of Static Device Nodes.677buildbot # [ 7.880526] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.678buildbot # [ 7.881621] systemd[1]: Finished Load Kernel Module 9pnet_virtio.679buildbot # [ 7.882458] systemd[1]: Mounted Kernel Configuration File System.680buildbot # [ 7.883299] systemd[1]: modprobe@fuse.service: Deactivated successfully.681buildbot # [ 7.892230] systemd[1]: Finished Load Kernel Module fuse.682buildbot # [ 7.896839] systemd[1]: Finished Load Kernel Modules.683buildbot # [ 7.900422] systemd[1]: Finished Remount Root and Kernel File Systems.684buildbot # [ 7.904632] systemd[1]: Listening on Disk Image Download Service Socket.685buildbot # [ 7.909916] systemd[1]: Mounting FUSE Control File System...686buildbot # [ 7.917289] systemd[1]: Starting Flush Journal to Persistent Storage...687buildbot # [ 7.920134] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore688buildbot # [ 7.929237] systemd[1]: Starting Load/Save OS Random Seed...689buildbot # [ 7.942805] systemd[1]: Starting Apply Kernel Variables...690buildbot # [ 7.947055] systemd-oomd[270]: No swap; memory pressure usage will be degraded691buildbot # [ 7.973580] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...692buildbot # [ 7.977732] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os693buildbot # [ 7.986171] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.694buildbot # [ 8.013879] systemd[1]: Finished Load/Save OS Random Seed.695buildbot # [ 8.014896] systemd[1]: Reached target First Boot Complete.696buildbot # [ 8.049734] systemd-journald[267]: Received client request to flush runtime journal.697buildbot # [ 8.095181] systemd[1]: Mounted FUSE Control File System.698buildbot # [ 8.100349] systemd[1]: Finished Flush Journal to Persistent Storage.699buildbot # [ 8.106590] systemd[1]: Finished Apply Kernel Variables.700buildbot # [ 8.142038] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.701buildbot # [ 8.144462] systemd[1]: Starting Create Static Device Nodes in /dev...702buildbot # [ 8.230201] systemd[1]: Finished Create Static Device Nodes in /dev.703buildbot # [ 8.231214] systemd[1]: Reached target Preparation for Local File Systems.704buildbot # [ 8.233721] systemd[1]: Starting Rule-based Manager for Device Events and Files...705buildbot # [ 8.412978] systemd[1]: Mounting /run/wrappers...706buildbot # [ 8.415911] systemd-udevd[300]: Using default interface naming scheme 'v261'.707buildbot # [ 8.461161] systemd[1]: Mounted /run/wrappers.708buildbot # [ 8.463732] systemd[1]: Reached target Local File Systems.709buildbot # [ 8.472118] systemd[1]: Listening on Boot Loader Control Service Socket.710buildbot # [ 8.474924] systemd[1]: Starting register-nix-paths.service...711buildbot # [ 8.494791] systemd[1]: Starting Create SUID/SGID Wrappers...712buildbot # [ 8.496987] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.713buildbot # [ 8.504107] systemd[1]: Starting Save Transient machine-id to Disk...714buildbot # [ 8.523004] systemd[1]: Starting Create System Files and Directories...715buildbot # [ 8.636899] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.716buildbot # [ 8.649315] systemd[1]: Finished Save Transient machine-id to Disk.717buildbot # [ 8.673892] systemd[1]: Started Rule-based Manager for Device Events and Files.718buildbot # [ 8.752633] systemd[1]: Finished Create System Files and Directories.719buildbot # [ 8.768040] systemd[1]: Starting Rebuild Journal Catalog...720buildbot # [ 8.771454] systemd[1]: Starting Record System Boot/Shutdown in UTMP...721buildbot # [ 8.906175] systemd[1]: Finished Record System Boot/Shutdown in UTMP.722buildbot # [ 8.946450] systemd[1]: Finished Rebuild Journal Catalog.723buildbot # [ 8.959621] systemd[1]: Starting Update is Completed...724buildbot # [ 9.045459] systemd[1]: Finished Update is Completed.725buildbot # [ 9.544902] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.726buildbot # [ 9.552219] systemd[1]: Finished Create SUID/SGID Wrappers.727buildbot # [ 9.716759] systemd[1]: Finished Coldplug All udev Devices.728buildbot # [ 9.763424] systemd[1]: Finished register-nix-paths.service.729buildbot # [ 9.764745] systemd[1]: Reached target System Initialization.730buildbot # [ 9.765585] systemd[1]: Started Discard unused filesystem blocks once a week.731buildbot # [ 9.766557] systemd[1]: Started Daily Cleanup of Temporary Directories.732buildbot # [ 9.767473] systemd[1]: Reached target Timer Units.733buildbot # [ 9.775685] systemd[1]: Listening on D-Bus System Message Bus Socket.734buildbot # [ 9.778020] systemd[1]: Listening on Nix Daemon Socket.735buildbot # [ 9.780185] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.736buildbot # [ 9.783843] systemd[1]: Reached target Socket Units.737buildbot # [ 9.786778] systemd[1]: Reached target Basic System.738buildbot # [ 9.788841] systemd[1]: Starting Import lastlog data into lastlog2 database...739buildbot # [ 9.793998] systemd[1]: Starting Name Service Cache Daemon (nsncd)...740buildbot # [ 9.798227] systemd[1]: Starting Post-Boot Actions...741buildbot # [ 9.827862] systemd[1]: Started Reset console on configuration changes.742buildbot # [ 9.841521] systemd[1]: Starting resolvconf update...743buildbot # [ 9.898915] nsncd[388]: Sep 06 07:07:10.561 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"744buildbot # [ 9.908595] systemd[1]: Starting D-Bus System Message Bus...745buildbot # [ 9.915175] systemd[1]: Started Name Service Cache Daemon (nsncd).746buildbot # [ 9.920189] systemd[1]: Finished Post-Boot Actions.747buildbot # [ 9.954531] systemd[1]: Reached target Host and Network Name Lookups.748buildbot # [ 9.956567] systemd[1]: Reached target User and Group Name Lookups.749buildbot # [ 9.977194] systemd[1]: Starting User Login Management...750buildbot # [ 10.007418] systemd[1]: Finished Import lastlog data into lastlog2 database.751buildbot # [ 10.125253] dbus-broker-launch[393]: Looking up NSS user entry for 'systemd-timesync'...752buildbot # [ 10.140558] systemd-logind[409]: New seat seat0.753buildbot # [ 10.149833] systemd[1]: Started User Login Management.754buildbot # [ 10.152187] dbus-broker-launch[393]: NSS returned no entry for 'systemd-timesync'755buildbot # [ 10.154959] dbus-broker-launch[393]: Invalid user-name in /nix/store/pj6vv3xib9scdlhlkii1bl1c4sfbyb56-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"756buildbot # [ 10.167220] systemd[1]: Starting linger-users.service...757buildbot # [ 10.184839] systemd[1]: Stopped target Host and Network Name Lookups.758buildbot # [ 10.190583] systemd[1]: Stopping Host and Network Name Lookups...759buildbot # [ 10.210816] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3760buildbot # [ 10.198813] systemd[1]: Stopped target User and Group Name Lookups.761buildbot # [ 10.199718] systemd[1]: Stopping User and Group Name Lookups...762buildbot # [ 10.206953] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...763buildbot # [ 10.214539] systemd[1]: Started D-Bus System Message Bus.764buildbot # [ 10.218105] systemd[1]: nscd.service: Deactivated successfully.765buildbot # [ 10.226504] systemd[1]: Stopped Name Service Cache Daemon (nsncd).766buildbot # [ 10.243607] systemd[1]: Starting Name Service Cache Daemon (nsncd)...767buildbot # [ 10.267859] dbus-broker-launch[393]: Ready768buildbot # [ 10.272759] systemd[1]: linger-users.service: Deactivated successfully.769buildbot # [ 10.280634] systemd[1]: Finished linger-users.service.770buildbot # [ 10.322228] systemd[1]: Started Name Service Cache Daemon (nsncd).771buildbot # [ 10.325061] nsncd[461]: Sep 06 07:07:10.984 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"772buildbot # [ 10.330322] systemd[1]: Reached target Host and Network Name Lookups.773buildbot # [ 10.333046] systemd[1]: Reached target User and Group Name Lookups.774buildbot # [ 10.354366] systemd[1]: Finished resolvconf update.775buildbot # [ 10.359102] systemd[1]: Reached target Preparation for Network.776buildbot # [ 10.365524] systemd[1]: Starting DHCP Client...777buildbot # [ 10.372170] systemd[1]: Starting Extra networking commands....778buildbot # [ 10.586756] dhcpcd[491]: dhcpcd-10.3.2 starting779buildbot # [ 10.600398] dhcpcd[521]: dev: loaded udev780buildbot # [ 10.610155] dhcpcd[521]: no valid interfaces found781buildbot # [ 10.611272] dhcpcd[521]: no valid interfaces found782buildbot # [ 10.617015] dhcpcd[521]: libudev: received NULL device783buildbot # [ 10.617906] dhcpcd[521]: libudev: received NULL device784buildbot # [ 10.671382] systemd[1]: Finished Extra networking commands..785buildbot # [ 10.676274] systemd[1]: Reached target Network.786buildbot # [ 10.683719] systemd[1]: Starting gitea...787buildbot # [ 10.690154] systemd[1]: Starting Nginx Web Server...788buildbot # [ 10.697130] systemd[1]: Starting PostgreSQL Server...789buildbot # [ 10.718316] systemd[1]: Starting Permit User Sessions...790buildbot # [ 10.808705] systemd[1]: Finished Permit User Sessions.791buildbot # [ 10.830994] systemd[1]: Started Getty on tty1.792buildbot # [ 10.831730] systemd[1]: Reached target Login Prompts.793buildbot # [ 11.032174] systemd[1]: Starting Virtual Console Setup...794buildbot # [ 11.077887] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.795buildbot # [ 11.084200] systemd[1]: Stopped Virtual Console Setup.796buildbot # [ 11.098156] systemd[1]: Starting Virtual Console Setup...797buildbot # [ 11.133344] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs798buildbot # [ 11.167578] nginx-pre-start[557]: nginx: the configuration file /nix/store/04fl48y3s1y6nmj8ifccxjga9gh309lw-nginx.conf syntax is ok799buildbot # [ 11.176760] nginx-pre-start[557]: nginx: configuration file /nix/store/04fl48y3s1y6nmj8ifccxjga9gh309lw-nginx.conf test is successful800buildbot # [ 11.187070] postgresql-pre-start[562]: The files belonging to this database system will be owned by user "postgres".801buildbot # [ 11.195606] postgresql-pre-start[562]: This user must also own the server process.802buildbot # [ 11.204453] systemd[1]: Started Nginx Web Server.803buildbot # [ 11.209602] postgresql-pre-start[562]: The database cluster will be initialized with locale "en_US.UTF-8".804buildbot # [ 11.222635] postgresql-pre-start[562]: The default database encoding has accordingly been set to "UTF8".805buildbot # [ 11.230160] postgresql-pre-start[562]: The default text search configuration will be set to "english".806buildbot # [ 11.236792] postgresql-pre-start[562]: Data page checksums are enabled.807buildbot # [ 11.241927] postgresql-pre-start[562]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok808buildbot # [ 11.251966] postgresql-pre-start[562]: creating subdirectories ... ok809buildbot # [ 11.258051] postgresql-pre-start[562]: selecting dynamic shared memory implementation ... posix810buildbot # [ 11.487938] postgresql-pre-start[562]: selecting default "max_connections" ... 100811buildbot # [ 11.733823] postgresql-pre-start[562]: selecting default "shared_buffers" ... 128MB812buildbot # [ 11.965835] systemd-vconsole-setup[566]: Configuration of first virtual console was skipped, ignoring remaining ones.813buildbot # [ 11.986158] systemd[1]: Finished Virtual Console Setup.814buildbot # [ 12.117814] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.815buildbot # [ 12.188360] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.816buildbot # [ 12.201316] systemd[1]: Started backdoor.service.817buildbot # [ 12.350808] 8021q: 802.1Q VLAN Support v1.8818buildbot # connecting to host...819buildbot: Guest shell says: b'Spawning backdoor root shell...\n'820buildbot: connected to guest root shell821buildbot: (connecting took 12.72 seconds)822buildbot: (finished: waiting for the VM to finish booting, in 13.14 seconds)823buildbot # [ 12.451181] (udev-worker)[582]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.824buildbot # [ 12.473359] (udev-worker)[584]: Network interface NamePolicy= disabled on kernel command line.825buildbot # [ 12.478917] (udev-worker)[582]: Network interface NamePolicy= disabled on kernel command line.826buildbot # [ 12.542453] cfg80211: Loading compiled-in X.509 certificates for regulatory database827buildbot # [ 12.595758] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'828buildbot # [ 12.598618] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'829buildbot # [ 12.602655] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2830buildbot # [ 12.603012] cfg80211: failed to load regulatory.db831buildbot # [ 12.859802] systemd[1]: Condition check resulted in Virtio network device being skipped.832buildbot # [ 12.880876] systemd[1]: Starting Address configuration of eth1...833buildbot # [ 13.058557] 8021q: adding VLAN 0 to HW filter on device eth0834buildbot # [ 13.053828] dhcpcd[521]: eth0: waiting for carrier835buildbot # [ 13.056387] dhcpcd[521]: eth0: carrier acquired836buildbot # [ 13.078068] 8021q: adding VLAN 0 to HW filter on device eth1837buildbot # [ 13.083316] dhcpcd[521]: DUID 00:01:00:01:32:2f:cd:a1:52:54:00:12:34:56838buildbot # [ 13.084506] dhcpcd[521]: eth0: IAID 00:12:34:56839buildbot # [ 13.086814] dhcpcd[521]: eth0: adding address fe80::5054:ff:fe12:3456840buildbot # [ 13.101411] network-addresses-eth1-start[619]: adding address 192.168.1.1/24... done841buildbot # [ 13.129726] network-addresses-eth1-start[619]: adding address 2001:db8:1::1/64... done842buildbot # [ 13.168206] systemd[1]: Finished Address configuration of eth1.843buildbot # [ 13.279905] systemd-logind[409]: Watching system buttons on /dev/input/event0 (gpio-keys)844buildbot # [ 13.676867] mousedev: PS/2 mouse device common for all mice845buildbot # [ 13.893556] dhcpcd[521]: eth0: soliciting a DHCP lease846buildbot # [ 13.896653] dhcpcd[521]: eth0: offered 10.0.2.15 from 10.0.2.2847buildbot # [ 13.900224] dhcpcd[521]: eth0: probing address 10.0.2.15/24848buildbot # [ 14.003507] systemd-logind[409]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)849buildbot # [ 14.899282] dhcpcd[521]: eth0: soliciting an IPv6 router850buildbot # [ 14.900831] dhcpcd[521]: eth0: Router Advertisement from fe80::2851buildbot # [ 14.903234] dhcpcd[521]: eth0: adding address fec0::5054:ff:fe12:3456/64852buildbot # [ 14.905872] dhcpcd[521]: eth0: adding route to fec0::/64853buildbot # [ 14.908529] dhcpcd[521]: eth0: adding default route via fe80::2854buildbot # [ 15.578129] gitea-pre-start[669]: 2026/09/06 07:07:16 cmd/migrate.go:31:runMigrate() [I] AppPath: /nix/store/8wad4p541hvk5vh3m8sa3fpidiazxfnx-gitea-1.27.3/bin/gitea855buildbot # [ 15.580125] gitea-pre-start[669]: 2026/09/06 07:07:16 cmd/migrate.go:32:runMigrate() [I] AppWorkPath: /var/lib/gitea856buildbot # [ 15.583034] gitea-pre-start[669]: 2026/09/06 07:07:16 cmd/migrate.go:33:runMigrate() [I] Custom path: /var/lib/gitea/custom857buildbot # [ 15.589105] gitea-pre-start[669]: 2026/09/06 07:07:16 cmd/migrate.go:34:runMigrate() [I] Log path: /var/lib/gitea/log858buildbot # [ 15.597587] gitea-pre-start[669]: 2026/09/06 07:07:16 cmd/migrate.go:35:runMigrate() [I] Configuration file: /var/lib/gitea/custom/conf/app.ini859buildbot # [ 15.601225] gitea-pre-start[669]: 2026/09/06 07:07:16 .../v3@v3.10.0/command_run.go:95:(*Command).Run() [I] PING DATABASE sqlite3860buildbot # [ 15.795133] postgresql-pre-start[562]: selecting default time zone ... UTC861buildbot # [ 15.802076] postgresql-pre-start[562]: creating configuration files ... ok862buildbot # [ 16.453423] postgresql-pre-start[562]: running bootstrap script ... ok863buildbot # [ 17.168046] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.864buildbot # [ 17.168237] systemd[1]: Stopped Virtual Console Setup.865buildbot # [ 17.168312] systemd[1]: Stopping Virtual Console Setup...866buildbot # [ 17.181036] systemd[1]: Starting Virtual Console Setup...867buildbot # [ 17.231716] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.868buildbot # [ 17.262291] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.869buildbot # [ 17.272325] systemd[1]: Stopped Virtual Console Setup.870buildbot # [ 17.280940] systemd[1]: Starting Virtual Console Setup...871buildbot # [ 17.339412] systemd-logind[409]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)872buildbot # [ 17.714313] postgresql-pre-start[562]: performing post-bootstrap initialization ... ok873buildbot # [ 17.800886] systemd-vconsole-setup[701]: Configuration of first virtual console was skipped, ignoring remaining ones.874buildbot # [ 17.805561] systemd[1]: Finished Virtual Console Setup.875buildbot # [ 18.052184] postgresql-pre-start[562]: syncing data to disk ... ok876buildbot # [ 18.053321] postgresql-pre-start[562]: initdb: warning: enabling "trust" authentication for local connections877buildbot # [ 18.054936] postgresql-pre-start[562]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.878buildbot # [ 18.058908] postgresql-pre-start[562]: Success. You can now start the database server using:879buildbot # [ 18.060835] postgresql-pre-start[562]: pg_ctl -D /var/lib/postgresql/18 -l logfile start880buildbot # [ 18.224491] postgres[711]: [711] LOG: starting PostgreSQL 18.6 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit881buildbot # [ 18.237970] postgres[711]: [711] LOG: listening on IPv6 address "::1", port 5432882buildbot # [ 18.239122] postgres[711]: [711] LOG: listening on IPv4 address "127.0.0.1", port 5432883buildbot # [ 18.241197] postgres[711]: [711] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"884buildbot # [ 18.258523] postgres[720]: [720] LOG: database system was shut down at 2026-09-06 07:07:18 GMT885buildbot # [ 18.263443] postgres[711]: [711] LOG: database system is ready to accept connections886buildbot # [ 18.271271] systemd[1]: Started PostgreSQL Server.887buildbot # [ 18.276243] systemd[1]: Starting PostgreSQL Setup Scripts...888buildbot # [ 18.558984] postgresql-setup-start[731]: CREATE DATABASE889buildbot # [ 18.617933] postgresql-setup-start[736]: CREATE ROLE890buildbot # [ 18.646411] postgresql-setup-start[738]: ALTER DATABASE891buildbot # [ 18.653485] systemd[1]: Finished PostgreSQL Setup Scripts.892buildbot # [ 18.655582] systemd[1]: Reached target PostgreSQL.893buildbot # [ 18.659359] dhcpcd[521]: eth0: leased 10.0.2.15 for 86400 seconds894buildbot # [ 18.662436] dhcpcd[521]: eth0: adding route to 10.0.2.0/24895buildbot # [ 18.663209] dhcpcd[521]: eth0: adding default route via 10.0.2.2896buildbot # [ 18.803274] systemd[1]: Started DHCP Client.897buildbot # [ 19.492610] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:263:runWeb() [I] Starting Gitea on PID: 808898buildbot # [ 20.315952] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:115:showWebStartupMessage() [I] Gitea version: 1.27.3 built with go1.26.7 : sqlite, sqlite_unlock_notify899buildbot # [ 20.316200] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:116:showWebStartupMessage() [I] * RunMode: prod900buildbot # [ 20.316242] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:117:showWebStartupMessage() [I] * AppPath: /nix/store/8wad4p541hvk5vh3m8sa3fpidiazxfnx-gitea-1.27.3/bin/gitea901buildbot # [ 20.316286] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:118:showWebStartupMessage() [I] * WorkPath: /var/lib/gitea902buildbot # [ 20.316318] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:119:showWebStartupMessage() [I] * CustomPath: /var/lib/gitea/custom903buildbot # [ 20.316351] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:120:showWebStartupMessage() [I] * ConfigFile: /var/lib/gitea/custom/conf/app.ini904buildbot # [ 20.316383] gitea[808]: 2026/09/06 07:07:20 cmd/web.go:121:showWebStartupMessage() [I] Prepare to run web server905buildbot # [ 20.512196] gitea[808]: 2026/09/06 07:07:21 routers/init.go:117:InitWebInstalled() [I] Git version: 2.55.0 (home: /var/lib/gitea/data/home)906buildbot # [ 20.813398] gitea[808]: 2026/09/06 07:07:21 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.0907buildbot # [ 20.816534] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:227:initAttachments() [I] Initialising Attachment storage with type: local908buildbot # [ 20.818260] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/attachments909buildbot # [ 20.820089] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:217:initAvatars() [I] Initialising Avatar storage with type: local910buildbot # [ 20.821977] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/avatars911buildbot # [ 20.823843] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:243:initRepoAvatars() [I] Initialising Repository Avatar storage with type: local912buildbot # [ 20.826134] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-avatars913buildbot # [ 20.827976] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:249:initRepoArchives() [I] Initialising Repository Archive storage with type: local914buildbot # [ 20.830032] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/repo-archive915buildbot # [ 20.831850] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:259:initPackages() [I] Initialising Packages storage with type: local916buildbot # [ 20.833960] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/packages917buildbot # [ 20.835745] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:270:initActions() [I] Initialising Actions storage with type: local918buildbot # [ 20.837597] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_log919buildbot # [ 20.839555] gitea[808]: 2026/09/06 07:07:21 modules/storage/storage.go:274:initActions() [I] Initialising ActionsArtifacts storage with type: local920buildbot # [ 20.841493] gitea[808]: 2026/09/06 07:07:21 modules/storage/local.go:48:NewLocalStorage() [I] Creating new Local Storage at /var/lib/gitea/data/actions_artifacts921buildbot # [ 20.843452] gitea[808]: 2026/09/06 07:07:21 routers/common/db.go:22:InitDBEngine() [I] Beginning ORM engine initialization.922buildbot # [ 20.845356] gitea[808]: 2026/09/06 07:07:21 routers/common/db.go:29:InitDBEngine() [I] ORM engine initialization attempt #1/10...923buildbot # [ 20.846906] gitea[808]: 2026/09/06 07:07:21 cmd/web.go:205:serveInstalled() [I] PING DATABASE sqlite3924buildbot # [ 20.916074] gitea[808]: 2026/09/06 07:07:21 cmd/web.go:205:serveInstalled() [W] Table system_setting Column version db default is , struct default is 1925buildbot # [ 20.980043] gitea[808]: 2026/09/06 07:07:21 routers/init.go:138:InitWebInstalled() [I] ORM engine initialization successful!926buildbot # [ 21.553539] gitea[808]: 2026/09/06 07:07:22 .../indexer/issues/indexer.go:78:InitIssueIndexer.1() [I] PID 808: Initializing Issue Indexer: bleve927buildbot # [ 21.555294] gitea[808]: 2026/09/06 07:07:22 .../indexer/stats/indexer.go:41:populateRepoIndexer() [I] Populating the repo stats indexer with existing repositories928buildbot # [ 21.559967] gitea[808]: 2026/09/06 07:07:22 .../indexer/issues/indexer.go:155:InitIssueIndexer.2() [I] Issue Indexer Initialization took 12.70856ms929buildbot # [ 21.580926] gitea[808]: 2026/09/06 07:07:22 routers/init.go:86:syncAppConfForGit() [I] AppPath changed from '' to '/nix/store/8wad4p541hvk5vh3m8sa3fpidiazxfnx-gitea-1.27.3/bin/gitea'930buildbot # [ 21.582980] gitea[808]: 2026/09/06 07:07:22 routers/init.go:91:syncAppConfForGit() [I] CustomConf changed from '' to '/var/lib/gitea/custom/conf/app.ini'931buildbot # [ 21.584796] gitea[808]: 2026/09/06 07:07:22 routers/init.go:97:syncAppConfForGit() [I] re-sync repository hooks ...932buildbot # [ 21.586800] gitea[808]: 2026/09/06 07:07:22 routers/init.go:100:syncAppConfForGit() [I] re-write ssh public keys ...933buildbot # [ 22.310869] gitea[808]: 2026/09/06 07:07:22 cmd/web.go:329:listen() [I] Listen: http://0.0.0.0:3742934buildbot # [ 22.313673] gitea[808]: 2026/09/06 07:07:22 cmd/web.go:333:listen() [I] AppURL(ROOT_URL): http://localhost:3742/935buildbot # [ 22.315007] gitea[808]: 2026/09/06 07:07:22 modules/graceful/server.go:52:NewServer() [I] Starting new Web server: tcp:0.0.0.0:3742 on PID: 808936buildbot # [ 22.326661] systemd[1]: Started gitea.937buildbot # [ 22.331787] systemd[1]: Starting Setup Gitea test environment...938buildbot: (finished: waiting for unit gitea.service, in 23.11 seconds)939buildbot: waiting for unit setup-gitea.service940buildbot # [ 22.389208] setup-gitea-start[860]: + timeout 60 /nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin/bash -c 'until curl -s http://localhost:3742/api/v1/version; do sleep 1; done'941buildbot # [ 22.469160] gitea[808]: 2026/09/06 07:07:23 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:58274, 200 OK in 6.4ms @ misc/version.go:15(misc.Version)942buildbot # [ 22.472717] setup-gitea-start[868]: {"version":"1.27.3"}943buildbot # [ 22.477986] setup-gitea-start[860]: + echo 'Gitea is ready'944buildbot # [ 22.478908] setup-gitea-start[860]: Gitea is ready945buildbot # [ 22.479692] setup-gitea-start[860]: + echo 'Creating admin user...'946buildbot # [ 22.480767] setup-gitea-start[860]: Creating admin user...947buildbot # [ 22.481590] setup-gitea-start[860]: + cd /var/lib/gitea948buildbot # [ 22.482401] setup-gitea-start[860]: + runuser -u gitea -- env GITEA_WORK_DIR=/var/lib/gitea GITEA_CUSTOM=/var/lib/gitea/custom /nix/store/8wad4p541hvk5vh3m8sa3fpidiazxfnx-gitea-1.27.3/bin/gitea admin user create --config /var/lib/gitea/custom/conf/app.ini --username gitea-admin --password testpassword123 --email admin@example.com --admin --must-change-password=false949buildbot # [ 22.515920] runuser[869]: pam_unix(runuser:session): session opened for user gitea(uid=996) by (uid=0)950buildbot # [ 22.704528] setup-gitea-start[870]: 2026/09/06 07:07:23 modules/setting/webhook.go:38:loadWebhookFrom() [E] Deprecation: config option `[webhook].ALLOWED_HOST_LIST` present, please use `[security].ALLOWED_HOST_LIST` instead because this fallback will be/has been removed in v28.0.0951buildbot # [ 22.719809] setup-gitea-start[870]: New user 'gitea-admin' has been successfully created!952buildbot # [ 22.727365] runuser[869]: pam_unix(runuser:session): session closed for user gitea953buildbot # [ 22.730370] setup-gitea-start[860]: + USER_CREATE_RESULT=0954buildbot # [ 22.731235] setup-gitea-start[860]: + '[' 0 -ne 0 ']'955buildbot # [ 22.731995] setup-gitea-start[860]: + echo 'Verifying user exists via API...'956buildbot # [ 22.733889] setup-gitea-start[860]: Verifying user exists via API...957buildbot # [ 22.734938] setup-gitea-start[860]: + for i in {1..10}958buildbot # [ 22.736733] setup-gitea-start[877]: ++ curl -s -u gitea-admin:testpassword123 http://localhost:3742/api/v1/user959buildbot # [ 22.791557] gitea[808]: 2026/09/06 07:07:23 HTTPRequest [I] router: completed GET /api/v1/user for [::1]:58288, 200 OK in 30.6ms @ user/user.go:127(user.GetAuthenticatedUser)960buildbot # [ 22.796623] setup-gitea-start[860]: + USER_CHECK='{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'961buildbot # [ 22.811341] setup-gitea-start[879]: + echo '{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":true,"last_login":"1970-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":true,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"}'962buildbot # [ 22.818602] setup-gitea-start[880]: + grep -q '"username":"gitea-admin"'963buildbot # [ 22.820995] setup-gitea-start[860]: + echo 'User verified to exist!'964buildbot # [ 22.821875] setup-gitea-start[860]: User verified to exist!965buildbot # [ 22.822632] setup-gitea-start[860]: + break966buildbot # [ 22.823199] setup-gitea-start[860]: + echo 'Creating access token...'967buildbot # [ 22.824794] setup-gitea-start[860]: Creating access token...968buildbot # [ 22.826498] setup-gitea-start[881]: ++ curl -v -X POST -H 'Content-Type: application/json' -d '{"name":"buildbot-token","scopes":["write:repository","write:user","write:admin","write:organization"]}' -u gitea-admin:testpassword123 http://localhost:3742/api/v1/users/gitea-admin/tokens969buildbot # [ 22.881637] gitea[808]: 2026/09/06 07:07:23 HTTPRequest [I] router: completed POST /api/v1/users/gitea-admin/tokens for [::1]:58298, 201 Created in 27.9ms @ user/app.go:75(user.CreateAccessToken)970buildbot # [ 22.886736] setup-gitea-start[860]: + TOKEN_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58298 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:23 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 8768 3408 0\r100 368 100 265 100 103 8722 3390 0\r100 368 100 265 100 103 8717 3388 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc","token_last_eight":"ef95f5cc","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'971buildbot # [ 22.908340] setup-gitea-start[860]: + echo $'Token response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58298 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:23 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 8768 3408 0\r100 368 100 265 100 103 8722 3390 0\r100 368 100 265 100 103 8717 3388 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc","token_last_eight":"ef95f5cc","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'972buildbot # [ 22.930219] setup-gitea-start[860]: Token response: Note: Unnecessary use of -X or --request, POST is already inferred.973buildbot # [ 22.931884] setup-gitea-start[860]: * Host localhost:3742 was resolved.974buildbot # [ 22.933074] setup-gitea-start[860]: * IPv6: ::1975buildbot # [ 22.933956] setup-gitea-start[860]: * IPv4: 127.0.0.1976buildbot # [ 22.935458] setup-gitea-start[860]: * Trying [::1]:3742...977buildbot # [ 22.937159] setup-gitea-start[860]: * Established connection to localhost (::1 port 3742) from ::1 port 58298978buildbot # [ 22.938751] setup-gitea-start[860]: % Total % Received % Xferd Average Speed Time Time Time Current979buildbot # [ 22.940555] setup-gitea-start[860]: Dload Upload Total Spent Left Speed980buildbot # [ 22.942249] setup-gitea-start[860]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x981buildbot # [ 22.943906] setup-gitea-start[860]: * Server auth using Basic with user 'gitea-admin'982buildbot # [ 22.946220] setup-gitea-start[860]: > POST /api/v1/users/gitea-admin/tokens HTTP/1.1983buildbot # [ 22.948136] setup-gitea-start[860]: > Host: localhost:3742984buildbot # [ 22.949599] setup-gitea-start[860]: > Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz985buildbot # [ 22.951524] setup-gitea-start[860]: > User-Agent: curl/8.21.0986buildbot # [ 22.952456] setup-gitea-start[860]: > Accept: */*987buildbot # [ 22.953215] setup-gitea-start[860]: > Content-Type: application/json988buildbot # [ 22.954265] setup-gitea-start[860]: > Content-Length: 103989buildbot # [ 22.955056] setup-gitea-start[860]: >990buildbot # [ 22.955562] setup-gitea-start[860]: } [103 bytes data]991buildbot # [ 22.956808] setup-gitea-start[860]: * upload completely sent off: 103 bytes992buildbot # [ 22.957837] setup-gitea-start[860]: < HTTP/1.1 201 Created993buildbot # [ 22.958678] setup-gitea-start[860]: < Cache-Control: max-age=0, private, must-revalidate994buildbot # [ 22.959826] setup-gitea-start[860]: < Content-Type: application/json;charset=utf-8995buildbot # [ 22.961129] setup-gitea-start[860]: < X-Content-Type-Options: nosniff996buildbot # [ 22.962096] setup-gitea-start[860]: < X-Frame-Options: SAMEORIGIN997buildbot # [ 22.963034] setup-gitea-start[860]: < Date: Sun, 06 Sep 2026 07:07:23 GMT998buildbot # [ 22.964060] setup-gitea-start[860]: < Content-Length: 265999buildbot # [ 22.965325] setup-gitea-start[860]: <1000buildbot # [ 22.965924] setup-gitea-start[860]: { [265 bytes data]1001buildbot # [ 22.966881] setup-gitea-start[860]: 100 368 100 265 100 103 8768 3408 0100 368 100 265 100 103 8722 3390 0100 368 100 265 100 103 8717 3388 01002buildbot # [ 22.970161] setup-gitea-start[860]: * Connection #0 to host localhost:3742 left intact1003buildbot # [ 22.971625] setup-gitea-start[860]: {"id":1,"name":"buildbot-token","sha1":"e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc","token_last_eight":"ef95f5cc","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}1004buildbot # [ 22.975505] setup-gitea-start[884]: ++ echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58298 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n* Server auth using Basic with user \'gitea-admin\'\n> POST /api/v1/users/gitea-admin/tokens HTTP/1.1\r\n> Host: localhost:3742\r\n> Authorization: Basic Z2l0ZWEtYWRtaW46dGVzdHBhc3N3b3JkMTIz\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Content-Type: application/json\r\n> Content-Length: 103\r\n> \r\n} [103 bytes data]\n* upload completely sent off: 103 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:23 GMT\r\n< Content-Length: 265\r\n< \r\n{ [265 bytes data]\n\r100 368 100 265 100 103 8768 3408 0\r100 368 100 265 100 103 8722 3390 0\r100 368 100 265 100 103 8717 3388 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"name":"buildbot-token","sha1":"e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc","token_last_eight":"ef95f5cc","scopes":["write:admin","write:organization","write:repository","write:user"],"created_at":"0001-01-01T00:00:00Z","last_used_at":"0001-01-01T00:00:00Z"}'1005buildbot # [ 22.995904] setup-gitea-start[885]: ++ grep -o '"sha1":"[^"]*'1006buildbot # [ 22.997191] setup-gitea-start[886]: ++ cut '-d"' -f41007buildbot # [ 22.998271] setup-gitea-start[860]: + TOKEN=e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc1008buildbot # [ 22.999341] setup-gitea-start[860]: + '[' -z e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc ']'1009buildbot # [ 23.001443] setup-gitea-start[860]: + echo 'Token created successfully: e3e2b0593f...'1010buildbot # [ 23.002936] setup-gitea-start[860]: Token created successfully: e3e2b0593f...1011buildbot # [ 23.004089] setup-gitea-start[860]: + mkdir -p /var/lib/buildbot1012buildbot # [ 23.005470] setup-gitea-start[860]: + echo e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc1013buildbot # [ 23.006595] setup-gitea-start[860]: + chmod 644 /var/lib/buildbot/gitea-token1014buildbot # [ 23.013876] setup-gitea-start[860]: + echo e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc1015buildbot # [ 23.014914] setup-gitea-start[860]: + echo 'Creating repository test-flake...'1016buildbot # [ 23.015834] setup-gitea-start[860]: Creating repository test-flake...1017buildbot # [ 23.017952] setup-gitea-start[889]: ++ curl -v -X POST -H 'Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc' -H 'Content-Type: application/json' -H 'accept: application/json' -d '{"name":"test-flake","private":false}' http://localhost:3742/api/v1/user/repos1018buildbot # [ 23.149497] gitea[808]: 2026/09/06 07:07:23 HTTPRequest [I] router: completed POST /api/v1/user/repos for [::1]:58302, 201 Created in 103.0ms @ repo/repo.go:280(repo.Create)1019buildbot # [ 23.154722] setup-gitea-start[860]: + REPO_RESPONSE=$'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58302 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:23 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 22333 351 0\r100 2391 0 2354 100 37 22281 350 0\r100 2391 0 2354 100 37 22277 350 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-09-06T07:07:23Z","updated_at":"2026-09-06T07:07:23Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1020buildbot # [ 23.197725] setup-gitea-start[860]: + echo $'Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58302 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:23 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 22333 351 0\r100 2391 0 2354 100 37 22281 350 0\r100 2391 0 2354 100 37 22277 350 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-09-06T07:07:23Z","updated_at":"2026-09-06T07:07:23Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1021buildbot # [ 23.241737] setup-gitea-start[860]: Repository creation response: Note: Unnecessary use of -X or --request, POST is already inferred.1022buildbot # [ 23.243491] setup-gitea-start[860]: * Host localhost:3742 was resolved.1023buildbot # [ 23.244584] setup-gitea-start[860]: * IPv6: ::11024buildbot # [ 23.245404] setup-gitea-start[860]: * IPv4: 127.0.0.11025buildbot # [ 23.246166] setup-gitea-start[860]: * Trying [::1]:3742...1026buildbot # [ 23.247489] setup-gitea-start[860]: * Established connection to localhost (::1 port 3742) from ::1 port 583021027buildbot # [ 23.248964] setup-gitea-start[860]: % Total % Received % Xferd Average Speed Time Time Time Current1028buildbot # [ 23.250500] setup-gitea-start[860]: Dload Upload Total Spent Left Speed1029buildbot # [ 23.251850] setup-gitea-start[860]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1030buildbot # [ 23.253714] setup-gitea-start[860]: > POST /api/v1/user/repos HTTP/1.11031buildbot # [ 23.254672] setup-gitea-start[860]: > Host: localhost:37421032buildbot # [ 23.255492] setup-gitea-start[860]: > User-Agent: curl/8.21.01033buildbot # [ 23.256543] setup-gitea-start[860]: > Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc1034buildbot # [ 23.257785] setup-gitea-start[860]: > Content-Type: application/json1035buildbot # [ 23.258746] setup-gitea-start[860]: > accept: application/json1036buildbot # [ 23.259611] setup-gitea-start[860]: > Content-Length: 371037buildbot # [ 23.262147] setup-gitea-start[860]: >1038buildbot # [ 23.262770] setup-gitea-start[860]: } [37 bytes data]1039buildbot # [ 23.263681] setup-gitea-start[860]: * upload completely sent off: 37 bytes1040buildbot # [ 23.265238] setup-gitea-start[860]: < HTTP/1.1 201 Created1041buildbot # [ 23.266162] setup-gitea-start[860]: < Cache-Control: max-age=0, private, must-revalidate1042buildbot # [ 23.267285] setup-gitea-start[860]: < Content-Type: application/json;charset=utf-81043buildbot # [ 23.268357] setup-gitea-start[860]: < X-Content-Type-Options: nosniff1044buildbot # [ 23.269183] setup-gitea-start[860]: < X-Frame-Options: SAMEORIGIN1045buildbot # [ 23.269966] setup-gitea-start[860]: < Date: Sun, 06 Sep 2026 07:07:23 GMT1046buildbot # [ 23.270856] setup-gitea-start[860]: < Transfer-Encoding: chunked1047buildbot # [ 23.271634] setup-gitea-start[860]: <1048buildbot # [ 23.273267] setup-gitea-start[860]: { [2366 bytes data]1049buildbot # [ 23.274248] setup-gitea-start[860]: 100 2391 0 2354 100 37 22333 351 0100 2391 0 2354 100 37 22281 350 0100 2391 0 2354 100 37 22277 350 01050buildbot # [ 23.277419] setup-gitea-start[860]: * Connection #0 to host localhost:3742 left intact1051buildbot # [ 23.279003] setup-gitea-start[860]: {"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-09-06T07:07:23Z","updated_at":"2026-09-06T07:07:23Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}1052buildbot # [ 23.306594] setup-gitea-start[896]: + echo $'Note: Unnecessary use of -X or --request, POST is already inferred.\n* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58302 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> POST /api/v1/user/repos HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc\r\n> Content-Type: application/json\r\n> accept: application/json\r\n> Content-Length: 37\r\n> \r\n} [37 bytes data]\n* upload completely sent off: 37 bytes\n< HTTP/1.1 201 Created\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< Content-Type: application/json;charset=utf-8\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:23 GMT\r\n< Transfer-Encoding: chunked\r\n< \r\n{ [2366 bytes data]\n\r100 2391 0 2354 100 37 22333 351 0\r100 2391 0 2354 100 37 22281 350 0\r100 2391 0 2354 100 37 22277 350 0\n* Connection #0 to host localhost:3742 left intact\n{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-09-06T07:07:23Z","updated_at":"2026-09-06T07:07:23Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":[],"licenses":[]}'1053buildbot # [ 23.351146] setup-gitea-start[897]: + grep -q '"id"'1054buildbot # [ 23.351917] setup-gitea-start[860]: + echo 'Repository created successfully'1055buildbot # [ 23.353242] setup-gitea-start[860]: Repository created successfully1056buildbot # [ 23.354167] setup-gitea-start[860]: + echo 'Adding buildbot-nix topic to repository...'1057buildbot # [ 23.355280] setup-gitea-start[860]: Adding buildbot-nix topic to repository...1058buildbot # [ 23.357163] setup-gitea-start[898]: ++ curl -v -X PUT -H 'Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc' -H 'Content-Type: application/json' -d '{"topics":["buildbot-nix"]}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/topics1059buildbot # [ 23.394405] gitea[808]: 2026/09/06 07:07:24 HTTPRequest [I] router: completed PUT /api/v1/repos/gitea-admin/test-flake/topics for [::1]:58304, 204 No Content in 14.9ms @ repo/topic.go:75(repo.UpdateTopics)1060buildbot # [ 23.402562] setup-gitea-start[860]: + TOPIC_RESPONSE=$'* Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58304 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:24 GMT\r\n< \r\n\r100 27 0 0 100 27 0 1569 0\r100 27 0 0 100 27 0 1345 0\r100 27 0 0 100 27 0 1315 0\n* Connection #0 to host localhost:3742 left intact'1061buildbot # [ 23.417502] setup-gitea-start[860]: + echo $'Topic response: * Host localhost:3742 was resolved.\n* IPv6: ::1\n* IPv4: 127.0.0.1\n* Trying [::1]:3742...\n* Established connection to localhost (::1 port 3742) from ::1 port 58304 \n % Total % Received % Xferd Average Speed Time Time Time Current\n Dload Upload Total Spent Left Speed\n\r 0 0 0 0 0 0 0 0 0* using HTTP/1.x\n> PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.1\r\n> Host: localhost:3742\r\n> User-Agent: curl/8.21.0\r\n> Accept: */*\r\n> Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc\r\n> Content-Type: application/json\r\n> Content-Length: 27\r\n> \r\n} [27 bytes data]\n* upload completely sent off: 27 bytes\n< HTTP/1.1 204 No Content\r\n< Cache-Control: max-age=0, private, must-revalidate\r\n< X-Content-Type-Options: nosniff\r\n< X-Frame-Options: SAMEORIGIN\r\n< Date: Sun, 06 Sep 2026 07:07:24 GMT\r\n< \r\n\r100 27 0 0 100 27 0 1569 0\r100 27 0 0 100 27 0 1345 0\r100 27 0 0 100 27 0 1315 0\n* Connection #0 to host localhost:3742 left intact'1062buildbot # [ 23.432502] setup-gitea-start[860]: Topic response: * Host localhost:3742 was resolved.1063buildbot # [ 23.433979] setup-gitea-start[860]: * IPv6: ::11064buildbot # [ 23.434604] setup-gitea-start[860]: * IPv4: 127.0.0.11065buildbot # [ 23.435295] setup-gitea-start[860]: * Trying [::1]:3742...1066buildbot # [ 23.436276] setup-gitea-start[860]: * Established connection to localhost (::1 port 3742) from ::1 port 583041067buildbot # [ 23.437652] setup-gitea-start[860]: % Total % Received % Xferd Average Speed Time Time Time Current1068buildbot # [ 23.439067] setup-gitea-start[860]: Dload Upload Total Spent Left Speed1069buildbot # [ 23.440812] setup-gitea-start[860]: 0 0 0 0 0 0 0 0 0* using HTTP/1.x1070buildbot # [ 23.442811] setup-gitea-start[860]: > PUT /api/v1/repos/gitea-admin/test-flake/topics HTTP/1.11071buildbot # [ 23.444050] setup-gitea-start[860]: > Host: localhost:37421072buildbot # [ 23.444846] setup-gitea-start[860]: > User-Agent: curl/8.21.01073buildbot # [ 23.445905] setup-gitea-start[860]: > Accept: */*1074buildbot # [ 23.446639] setup-gitea-start[860]: > Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc1075buildbot # [ 23.447873] setup-gitea-start[860]: > Content-Type: application/json1076buildbot # [ 23.449077] setup-gitea-start[860]: > Content-Length: 271077buildbot # [ 23.449906] setup-gitea-start[860]: >1078buildbot # [ 23.450493] setup-gitea-start[860]: } [27 bytes data]1079buildbot # [ 23.451475] setup-gitea-start[860]: * upload completely sent off: 27 bytes1080buildbot # [ 23.454039] setup-gitea-start[860]: < HTTP/1.1 204 No Content1081buildbot # [ 23.454805] setup-gitea-start[860]: < Cache-Control: max-age=0, private, must-revalidate1082buildbot # [ 23.455801] setup-gitea-start[860]: < X-Content-Type-Options: nosniff1083buildbot # [ 23.457614] setup-gitea-start[860]: < X-Frame-Options: SAMEORIGIN1084buildbot # [ 23.458680] setup-gitea-start[860]: < Date: Sun, 06 Sep 2026 07:07:24 GMT1085buildbot # [ 23.459770] setup-gitea-start[860]: <1086buildbot # [ 23.461239] setup-gitea-start[860]: 100 27 0 0 100 27 0 1569 0100 27 0 0 100 27 0 1345 0100 27 0 0 100 27 0 1315 01087buildbot # [ 23.464693] setup-gitea-start[860]: * Connection #0 to host localhost:3742 left intact1088buildbot # [ 23.465845] setup-gitea-start[860]: + rm -rf /tmp/test-flake1089buildbot # [ 23.467767] setup-gitea-start[860]: + mkdir -p /tmp/test-flake1090buildbot # [ 23.474034] setup-gitea-start[860]: + cd /tmp/test-flake1091buildbot # [ 23.475540] setup-gitea-start[860]: + git init1092buildbot # [ 23.505894] setup-gitea-start[905]: hint: Using 'master' as the name for the initial branch. This default branch name1093buildbot # [ 23.509880] setup-gitea-start[905]: hint: will change to "main" in Git 3.0. To configure the initial branch name1094buildbot # [ 23.511219] setup-gitea-start[905]: hint: to use in all of your new repositories, which will suppress this warning,1095buildbot # [ 23.514494] setup-gitea-start[905]: hint: call:1096buildbot # [ 23.515227] setup-gitea-start[905]: hint:1097buildbot # [ 23.515912] setup-gitea-start[905]: hint: git config --global init.defaultBranch <name>1098buildbot # [ 23.518639] setup-gitea-start[905]: hint:1099buildbot # [ 23.519780] setup-gitea-start[905]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and1100buildbot # [ 23.521701] setup-gitea-start[905]: hint: 'development'. The just-created branch can be renamed via this command:1101buildbot # [ 23.523390] setup-gitea-start[905]: hint:1102buildbot # [ 23.524280] setup-gitea-start[905]: hint: git branch -m <name>1103buildbot # [ 23.525841] setup-gitea-start[905]: hint:1104buildbot # [ 23.526671] setup-gitea-start[905]: hint: Disable this message with "git config set advice.defaultBranchName false"1105buildbot # [ 23.528467] setup-gitea-start[905]: Initialized empty Git repository in /tmp/test-flake/.git/1106buildbot # [ 23.530496] setup-gitea-start[860]: + git config user.name 'Test User'1107buildbot # [ 23.533438] setup-gitea-start[860]: + git config user.email test@example.com1108buildbot # [ 23.541404] setup-gitea-start[860]: + cat1109buildbot # [ 23.548747] setup-gitea-start[860]: + cat1110buildbot # [ 23.555878] setup-gitea-start[860]: + git add flake.nix buildbot-nix.toml1111buildbot # [ 23.567098] setup-gitea-start[860]: + git commit -m 'Initial commit'1112buildbot # [ 23.607663] setup-gitea-start[912]: [master (root-commit) 8b76689] Initial commit1113buildbot # [ 23.608821] setup-gitea-start[912]: 2 files changed, 24 insertions(+)1114buildbot # [ 23.609905] setup-gitea-start[912]: create mode 100644 buildbot-nix.toml1115buildbot # [ 23.611037] setup-gitea-start[912]: create mode 100644 flake.nix1116buildbot # [ 23.612496] setup-gitea-start[860]: + echo 'Verifying repository exists...'1117buildbot # [ 23.614066] setup-gitea-start[860]: Verifying repository exists...1118buildbot # [ 23.616506] setup-gitea-start[915]: ++ curl -s -H 'Authorization: token e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc' http://localhost:3742/api/v1/repos/gitea-admin/test-flake1119buildbot # [ 23.651926] gitea[808]: 2026/09/06 07:07:24 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake for [::1]:58310, 200 OK in 11.0ms @ repo/repo.go:498(repo.Get)1120buildbot # [ 23.657034] setup-gitea-start[860]: + REPO_CHECK='{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-09-06T07:07:23Z","updated_at":"2026-09-06T07:07:24Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1121buildbot # [ 23.684691] setup-gitea-start[916]: + echo '{"id":1,"owner":{"id":1,"login":"gitea-admin","login_name":"","source_id":0,"full_name":"","email":"admin@example.com","avatar_url":"http://localhost:3742/avatars/e64c7d89f26bd1972efa854d13d7dd61","html_url":"http://localhost:3742/gitea-admin","language":"","is_admin":false,"last_login":"0001-01-01T00:00:00Z","created":"2026-09-06T07:07:23Z","restricted":false,"active":false,"prohibit_login":false,"location":"","website":"","description":"","visibility":"public","followers_count":0,"following_count":0,"starred_repos_count":0,"username":"gitea-admin"},"name":"test-flake","full_name":"gitea-admin/test-flake","description":"","empty":true,"private":false,"fork":false,"template":false,"mirror":false,"size":29,"language":"","languages_url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake/languages","html_url":"http://localhost:3742/gitea-admin/test-flake","url":"http://localhost:3742/api/v1/repos/gitea-admin/test-flake","link":"","ssh_url":"gitea@localhost:gitea-admin/test-flake.git","clone_url":"http://localhost:3742/gitea-admin/test-flake.git","original_url":"","website":"","stars_count":0,"forks_count":0,"watchers_count":1,"branch_count":0,"open_issues_count":0,"open_pr_counter":0,"release_counter":0,"default_branch":"main","archived":false,"created_at":"2026-09-06T07:07:23Z","updated_at":"2026-09-06T07:07:24Z","archived_at":"1970-01-01T00:00:00Z","permissions":{"admin":true,"push":true,"pull":true},"has_code":true,"has_issues":true,"internal_tracker":{"enable_time_tracker":true,"allow_only_contributors_to_track_time":true,"enable_issue_dependencies":true},"has_wiki":true,"has_pull_requests":true,"has_projects":true,"projects_mode":"all","has_releases":true,"has_packages":true,"has_actions":true,"ignore_whitespace_conflicts":false,"allow_merge_commits":true,"allow_rebase":true,"allow_rebase_explicit":true,"allow_squash_merge":true,"allow_fast_forward_only_merge":true,"allow_merge_update":true,"allow_rebase_update":true,"allow_manual_merge":false,"autodetect_manual_merge":false,"default_delete_branch_after_merge":false,"default_merge_style":"merge","default_update_style":"merge","default_allow_maintainer_edit":true,"avatar_url":"","internal":false,"mirror_interval":"","object_format_name":"sha1","mirror_updated":"0001-01-01T00:00:00Z","mirror_last_sync_at":"0001-01-01T00:00:00Z","topics":["buildbot-nix"],"licenses":[]}'1122buildbot # [ 23.712772] setup-gitea-start[917]: + grep -q '"id"'1123buildbot # [ 23.719632] setup-gitea-start[860]: + echo 'Repository confirmed to exist, pushing code...'1124buildbot # [ 23.721026] setup-gitea-start[860]: Repository confirmed to exist, pushing code...1125buildbot # [ 23.722087] setup-gitea-start[860]: + git remote add origin http://gitea-admin:testpassword123@localhost:3742/gitea-admin/test-flake.git1126buildbot # [ 23.734260] setup-gitea-start[860]: + git push -u origin master1127buildbot # [ 23.797172] gitea[808]: 2026/09/06 07:07:24 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:58322, 401 Unauthorized in 1.7ms @ repo/githttp.go:455(repo.GetInfoRefs)1128buildbot # [ 23.827850] gitea[808]: 2026/09/06 07:07:24 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:58322, 200 OK in 27.6ms @ repo/githttp.go:455(repo.GetInfoRefs)1129buildbot # [ 24.067607] gitea[808]: 2026/09/06 07:07:24 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 3.0ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1130buildbot # [ 24.416216] gitea[808]: 2026/09/06 07:07:25 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 45.0ms @ private/hook_post_receive.go:101(private.HookPostReceive)1131buildbot # [ 24.430789] gitea[808]: 2026/09/06 07:07:25 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:58322, 200 OK in 582.9ms @ repo/githttp.go:438(repo.ServiceReceivePack)1132buildbot # [ 24.435653] setup-gitea-start[919]: To http://localhost:3742/gitea-admin/test-flake.git1133buildbot # [ 24.439576] setup-gitea-start[919]: * [new branch] master -> master1134buildbot # [ 24.444440] setup-gitea-start[919]: branch 'master' set up to track 'origin/master'.1135buildbot # [ 24.448884] systemd[1]: Finished Setup Gitea test environment.1136buildbot # [ 24.453631] systemd[1]: Starting Buildbot Continuous Integration Server....1137buildbot # [ 24.506602] buildbot-master-pre-start[981]: mkdir: created directory '/var/lib/buildbot/master'1138buildbot: (finished: waiting for unit setup-gitea.service, in 2.21 seconds)1139buildbot: waiting for unit multi-user.target1140buildbot # [ 30.100065] buildbot-master-pre-start[983]: updating existing installation1141buildbot # [ 30.100291] buildbot-master-pre-start[983]: not touching existing buildbot.tac1142buildbot # [ 30.100329] buildbot-master-pre-start[983]: creating buildbot.tac.new instead1143buildbot # [ 30.100360] buildbot-master-pre-start[983]: creating /var/lib/buildbot/master/master.cfg.sample1144buildbot # [ 30.100391] buildbot-master-pre-start[983]: creating database (postgresql://@/buildbot)1145buildbot # [ 30.100423] buildbot-master-pre-start[983]: buildmaster configured in /var/lib/buildbot/master1146buildbot # [ 30.536535] systemd[1]: Started Buildbot Continuous Integration Server..1147buildbot # [ 30.546950] systemd[1]: Started Buildbot Worker..1148buildbot # [ 30.549391] systemd[1]: Reached target Multi-User System.1149buildbot # [ 30.550176] systemd[1]: Startup finished in 904ms (kernel) + 4.502s (initrd) + 25.142s (userspace) = 30.548s.1150buildbot: (finished: waiting for unit multi-user.target, in 6.75 seconds)1151subtest: Gitea service is accessible1152buildbot: waiting for TCP port 3742 on localhost1153buildbot # Connection to localhost (::1) 3742 port [tcp/cst-port] succeeded!1154buildbot: (finished: waiting for TCP port 3742 on localhost, in 0.09 seconds)1155??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1156 File "/nix/store/ifid8v1phbdldw2n5l1p1v3an4s9p3q8-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391157buildbot: waiting for success: curl --fail http://localhost:3742/api/v1/version1158??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1159 File "/nix/store/ifid8v1phbdldw2n5l1p1v3an4s9p3q8-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391160buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1161buildbot # Dload Upload Total Spent Left Speed1162buildbot # 0 0 0 0 0 0 0 0 0100 21 100 21 0 0 735 0 0100 21 100 21 0 0 6[ 31.560247] gitea[808]: 2026/09/06 07:07:32 HTTPRequest [I] router: completed GET /api/v1/version for [::1]:48650, 200 OK in 0.6ms @ misc/version.go:15(misc.Version)1163buildbot # 63 0 0100 21 100 21 0 0 478 0 01164buildbot: (finished: waiting for success: curl --fail http://localhost:3742/api/v1/version, in 0.15 seconds)1165(finished: subtest: Gitea service is accessible, in 0.24 seconds)1166subtest: Gitea token was created1167buildbot: must succeed: test -f /var/lib/buildbot/gitea-token1168buildbot: (finished: must succeed: test -f /var/lib/buildbot/gitea-token, in 0.02 seconds)1169buildbot: must succeed: cat /tmp/gitea-token1170buildbot: (finished: must succeed: cat /tmp/gitea-token, in 0.04 seconds)1171(finished: subtest: Gitea token was created, in 0.07 seconds)1172subtest: Master and worker services start1173buildbot: waiting for unit buildbot-master.service1174buildbot: (finished: waiting for unit buildbot-master.service, in 0.08 seconds)1175buildbot: waiting for unit buildbot-worker.service1176buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds)1177buildbot: waiting for TCP port 8010 on localhost1178buildbot # [ 32.395630] twistd[1067]: Starting worker local-worker-0001179buildbot # [ 32.395763] twistd[1067]: 2026-09-06T07:07:32+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1180buildbot # [ 32.397438] twistd[1067]: 2026-09-06T07:07:33+0000 [-] Loaded.1181buildbot # [ 32.400726] twistd[1067]: 2026-09-06T07:07:33+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin/python3.14 3.14.7) starting up.1182buildbot # [ 32.400791] twistd[1067]: 2026-09-06T07:07:33+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1183buildbot # [ 32.400823] twistd[1067]: 2026-09-06T07:07:33+0000 [-] Starting Worker -- version: 2026.09.061184buildbot # [ 32.400857] twistd[1067]: 2026-09-06T07:07:33+0000 [-] recording hostname in twistd.hostname1185buildbot # [ 32.400889] twistd[1067]: 2026-09-06T07:07:33+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xfd7dd1a80050>1186buildbot # [ 32.408577] twistd[1067]: 2026-09-06T07:07:33+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xfd7dd1a80590> in 2.071690256149161 seconds.1187buildbot # [ 32.419784] twistd[1067]: 2026-09-06T07:07:33+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xfd7dd1a80050>1188buildbot # [ 34.283676] twistd[1066]: 2026-09-06T07:07:32+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1189buildbot # [ 34.285711] twistd[1066]: 2026-09-06T07:07:34+0000 [-] Loaded.1190buildbot # [ 34.286518] twistd[1066]: 2026-09-06T07:07:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin/python3.14 3.14.7) starting up.1191buildbot # [ 34.288993] twistd[1066]: 2026-09-06T07:07:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1192buildbot # [ 34.290979] twistd[1066]: 2026-09-06T07:07:34+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01193buildbot # [ 34.301069] twistd[1066]: 2026-09-06T07:07:34+0000 [-] Loading configuration from '/nix/store/y0sag9kywigwyc09x0byb87pscgbgsv6-master.cfg'1194buildbot # [ 34.494995] twistd[1067]: 2026-09-06T07:07:35+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xfd7dd1a80050>1195buildbot # [ 34.498725] twistd[1067]: 2026-09-06T07:07:35+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xfd7dd1a80590> in 2.3413507794696184 seconds.1196buildbot # [ 34.501975] twistd[1067]: 2026-09-06T07:07:35+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xfd7dd1a80050>1197buildbot # [ 35.162339] twistd[1066]: 2026-09-06T07:07:35+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1198buildbot # [ 35.263823] twistd[1066]: 2026-09-06T07:07:35+0000 [-] adding 2 new builders, removing 01199buildbot # [ 35.301857] twistd[1066]: 2026-09-06T07:07:35+0000 [-] adding 4 new services, removing 01200buildbot # [ 35.454802] twistd[1066]: 2026-09-06T07:07:36+0000 [-] adding 4 new schedulers, removing 01201buildbot # [ 35.496355] twistd[1066]: 2026-09-06T07:07:36+0000 [-] PeriodicWithStartup scheduler <reload-gitea-projects-bidaily>: missed scheduled build time - building immediately1202buildbot # [ 35.531971] twistd[1066]: 2026-09-06T07:07:36+0000 [-] BuildbotSite starting on 80101203buildbot # [ 35.534165] twistd[1066]: 2026-09-06T07:07:36+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0xe3e305c77cb0>1204buildbot # [ 35.538725] twistd[1066]: 2026-09-06T07:07:36+0000 [-] adding 5 new workers, removing 01205buildbot # [ 35.559648] twistd[1066]: 2026-09-06T07:07:36+0000 [-] PBServerFactory starting on 99891206buildbot # [ 35.562627] twistd[1066]: 2026-09-06T07:07:36+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0xe3e30430c980>1207buildbot # [ 35.587523] twistd[1066]: 2026-09-06T07:07:36+0000 [-] added buildset 1 to database1208buildbot # [ 35.612862] twistd[1066]: 2026-09-06T07:07:36+0000 [-] Starting Worker -- version: 2026.09.061209buildbot # [ 35.614668] twistd[1066]: 2026-09-06T07:07:36+0000 [-] recording hostname in twistd.hostname1210buildbot # [ 35.615965] twistd[1066]: 2026-09-06T07:07:36+0000 [-] message from master: attached1211buildbot # [ 35.618253] twistd[1066]: 2026-09-06T07:07:36+0000 [-] Got workerinfo from '__Janitor'1212buildbot # [ 35.626158] twistd[1066]: 2026-09-06T07:07:36+0000 [-] bot attached1213buildbot # [ 35.627043] twistd[1066]: 2026-09-06T07:07:36+0000 [-] Worker __Janitor attached to __Janitor1214buildbot # [ 35.629733] twistd[1066]: 2026-09-06T07:07:36+0000 [-] message from master: attached1215buildbot # [ 35.667953] twistd[1066]: 2026-09-06T07:07:36+0000 [-] BuildMaster is running1216buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1217buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.28 seconds)1218buildbot: waiting for success: curl --fail -v --head http://localhost:80101219buildbot # * Host localhost:8010 was resolved.1220buildbot # * IPv6: ::11221buildbot # * IPv4: 127.0.0.11222buildbot # * Trying [::1]:8010...1223buildbot # * connect to ::1 port 8010 from ::1 port 39996 failed: Connection refused1224buildbot # * Trying 127.0.0.1:8010...1225buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 549841226buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1227buildbot # Dload Upload Total Spent Left Speed1228buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1229buildbot # > HEAD / HTTP/1.11230buildbot # > Host: localhost:80101231buildbot # > User-Agent: curl/8.21.01232buildbot # > Accept: */*1233buildbot # >1234buildbot # * Request completely sent off1235buildbot # < HTTP/1.1 200 OK1236buildbot # < Date: Sun, 06 Sep 2026 07:07:36 GMT1237buildbot # < Content-Type: text/html1238buildbot # < Cache-Control: public,max-age=01239buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg5MjgzMjU2fQ.cFxBXfylCE8YsbpFmc8bhuPD_lMiiVRuI8v4RIz_-A8; Path=/1240buildbot # <1241buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01242buildbot # * Connection #0 to host localhost:8010 left intact1243buildbot: (finished: waiting for success: curl --fail -v --head http://localhost:8010, in 0.10 seconds)1244(finished: subtest: Master and worker services start, in 4.54 seconds)1245subtest: Project is registered in buildbot1246??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1247 File "/nix/store/ifid8v1phbdldw2n5l1p1v3an4s9p3q8-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281248buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1249buildbot # * Host localhost:8010 was resolved.1250buildbot # * IPv6: ::11251buildbot # * IPv4: 127.0.0.11252buildbot # * Trying [::1]:8010...1253buildbot # * connect to ::1 port 8010 from ::1 port 39998 failed: Connection refused1254buildbot # * Trying 127.0.0.1:8010...1255buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 549901256buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1257buildbot # Dload Upload Total Spent Left Speed1258buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1259buildbot # > GET /api/v2/projects HTTP/1.11260buildbot # > Host: localhost:80101261buildbot # > User-Agent: curl/8.21.01262buildbot # > Accept: */*1263buildbot # >1264buildbot # * Request completely sent off1265buildbot # < HTTP/1.1 200 OK1266buildbot # < Date: Sun, 06 Sep 2026 07:07:36 GMT1267buildbot # < Content-Type: text/plain; charset=utf-81268buildbot # < Content-Length: 531269buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg5MjgzMjU2fQ.cFxBXfylCE8YsbpFmc8bhuPD_lMiiVRuI8v4RIz_-A8; Path=/1270buildbot # <1271buildbot # { [53 bytes data]1272buildbot # 100 53 100 53 0 0 2404 0 0100 53 100 53 0 0 2165 0 0100 53 100 53 0 0 1973 0 01273buildbot # * Connection #0 to host localhost:8010 left intact1274buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.08 seconds)1275buildbot # [ 36.845104] twistd[1067]: 2026-09-06T07:07:37+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xfd7dd1a80050>1276buildbot # [ 36.864499] twistd[1066]: 2026-09-06T07:07:37+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=43292)1277buildbot # [ 36.872588] twistd[1067]: 2026-09-06T07:07:37+0000 [Broker,client] message from master: attached1278buildbot # [ 36.886811] twistd[1066]: 2026-09-06T07:07:37+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1279buildbot # [ 36.906126] twistd[1066]: 2026-09-06T07:07:37+0000 [-] bot attached1280buildbot # [ 36.915397] twistd[1066]: 2026-09-06T07:07:37+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to reload-gitea-projects1281buildbot # [ 36.924064] twistd[1067]: 2026-09-06T07:07:37+0000 [Broker,client] message from master: attached1282buildbot # [ 36.935498] twistd[1067]: 2026-09-06T07:07:37+0000 [Broker,client] Connected to buildmaster; worker is ready1283buildbot # [ 36.944188] twistd[1067]: 2026-09-06T07:07:37+0000 [Broker,client] sending application-level keepalives every 600 seconds1284buildbot # [ 36.971652] twistd[1066]: 2026-09-06T07:07:37+0000 [-] starting build <Build reload-gitea-projects number:None results:success> using worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=AVAILABLE>1285buildbot # [ 36.980145] twistd[1066]: 2026-09-06T07:07:37+0000 [-] <Build reload-gitea-projects number:None results:success>.startBuild1286buildbot # [ 37.031776] twistd[1066]: 2026-09-06T07:07:37+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1287buildbot # [ 37.037012] twistd[1066]: 2026-09-06T07:07:37+0000 [-] starting build <Build reload-gitea-projects number:1 results:success>.. pinging the worker <WorkerForBuilder builder='reload-gitea-projects' worker='local-worker-000' state=BUILDING>1288buildbot # [ 37.039733] twistd[1066]: 2026-09-06T07:07:37+0000 [-] sending ping1289buildbot # [ 37.042180] twistd[1067]: 2026-09-06T07:07:37+0000 [Broker,client] message from master: ping1290buildbot # [ 37.045701] twistd[1066]: 2026-09-06T07:07:37+0000 [Broker,0,127.0.0.1] ping finished: success1291buildbot # [ 37.112162] gitea[808]: 2026/09/06 07:07:37 HTTPRequest [I] router: completed GET /api/v1/user/repos?limit=100 for [::1]:48656, 200 OK in 12.3ms @ user/repo.go:89(user.ListMyRepos)1292buildbot # [ 37.123233] twistd[1066]: 2026-09-06T07:07:37+0000 [buildbot_nix.gitea_projects#info] Updated backend gitea_projects with 1 projects1293buildbot # [ 37.126674] gitea[808]: 2026/09/06 07:07:37 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/topics for [::1]:48666, 200 OK in 11.3ms @ repo/topic.go:21(repo.ListTopics)1294buildbot # [ 37.130903] twistd[1066]: 2026-09-06T07:07:37+0000 [-] releaseLocks(ReloadGiteaProjects(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), PosixPath('gitea-project-cache.json'), backend=<buildbot_nix.gitea_projects.GiteaBackend object at 0xe3e3061dbe00>)): []1295buildbot # [ 37.146198] twistd[1066]: 2026-09-06T07:07:37+0000 [-] step 'reload_gitea_projects' complete: success (None)1296buildbot # [ 37.168935] gitea[808]: 2026/09/06 07:07:37 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks?limit=100 for [::1]:48670, 200 OK in 10.2ms @ repo/hook.go:26(repo.ListHooks)1297buildbot # [ 37.171214] twistd[1066]: 2026-09-06T07:07:37+0000 [-] creating hook for gitea-admin/test-flake1298buildbot # [ 37.187408] gitea[808]: 2026/09/06 07:07:37 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:48680, 201 Created in 13.1ms @ repo/hook.go:200(repo.CreateHook)1299buildbot # [ 37.191654] twistd[1066]: 2026-09-06T07:07:37+0000 [-] beginning configuration update1300buildbot # [ 37.193752] twistd[1066]: 2026-09-06T07:07:37+0000 [-] Loading configuration from '/nix/store/y0sag9kywigwyc09x0byb87pscgbgsv6-master.cfg'1301buildbot # [ 37.198610] twistd[1066]: 2026-09-06T07:07:37+0000 [-] releaseLocks(CreateGiteaProjectHooks(GiteaConfig(instance_url='http://localhost:3742', filters=RepoFilters(repo_allowlist=None, user_allowlist=None, topic='buildbot-nix'), token_file=PosixPath('gitea-token'), webhook_secret_file=PosixPath('gitea-webhook-secret'), project_cache_file=PosixPath('gitea-project-cache.json'), oauth_id=None, oauth_secret_file=PosixPath('gitea-oauth-secret'), ssh_private_key_file=None, ssh_known_hosts_file=None), 'http://localhost/')): []1302buildbot # [ 37.206394] twistd[1066]: 2026-09-06T07:07:37+0000 [buildbot_nix.gitea_projects#info] Loading 1 cached repositories: [gitea-admin/test-flake]1303buildbot # [ 37.212734] twistd[1066]: 2026-09-06T07:07:37+0000 [-] step 'create_gitea_project_hooks' complete: success (None)1304buildbot # [ 37.215777] twistd[1066]: 2026-09-06T07:07:37+0000 [-] <Build reload-gitea-projects number:1 results:success>: build finished1305buildbot # [ 37.223707] twistd[1066]: 2026-09-06T07:07:37+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1306buildbot # [ 37.268144] twistd[1066]: 2026-09-06T07:07:37+0000 [-] adding 8 new builders, removing 01307buildbot: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects1308buildbot # * Host localhost:8010 was resolved.1309buildbot # * IPv6: ::11310buildbot # * IPv4: 127.0.0.11311buildbot # * Trying [::1]:8010...1312buildbot # * connect to ::1 port 8010 from ::1 port 40012 failed: Connection refused1313buildbot # * Trying 127.0.0.1:8010...1314buildbot # * Established connection to localhost (127.0.0.1 port 8010) from 127.0.0.1 port 550061315buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1316buildbot # Dload Upload Total Spent Left Speed1317buildbot # 0 0 0 0 0 0 0 0 0* using HTTP/1.x1318buildbot # > GET /api/v2/projects HTTP/1.11319buildbot # > Host: localhost:80101320buildbot # > User-Agent: curl/8.21.01321buildbot # > Accept: */*1322buildbot # >1323buildbot # * Request completely sent off1324buildbot # [ 37.506926] twistd[1066]: 2026-09-06T07:07:38+0000 [-] adding 12 new schedulers, removing 01325buildbot # < HTTP/1.1 200 OK1326buildbot # < Date: Sun, 06 Sep 2026 07:07:38 GMT1327buildbot # < Content-Type: text/plain; charset=utf-81328buildbot # < Content-Length: 2901329buildbot # < Set-Cookie: TWISTED_SESSION=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyX2luZm8iOnsiYW5vbnltb3VzIjp0cnVlfSwiZXhwIjoxNzg5MjgzMjU4fQ.FdrICy2En2SVAmU43R4ekKifKZSHJSbNrx-fIcHMahI; Path=/1330buildbot # <1331buildbot # { [290 bytes data]1332buildbot # 100 290 100 290 0 0 1714 0 0100 290 100 290 0 0 1648 0 0100 290 100 290 0 0 1626 0 01333buildbot # * Connection #0 to host localhost:8010 left intact1334buildbot: (finished: waiting for success: curl --fail -v http://localhost:8010/api/v2/projects, in 0.29 seconds)1335(finished: subtest: Project is registered in buildbot, in 1.37 seconds)1336subtest: Verify webhook was created by buildbot1337buildbot: waiting for success: 1338 TOKEN=$(cat /tmp/gitea-token)1339 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1340 1341buildbot # [ 37.693953] gitea[808]: 2026/09/06 07:07:38 HTTPRequest [I] router: completed GET /api/v1/repos/gitea-admin/test-flake/hooks for [::1]:48686, 200 OK in 16.7ms @ repo/hook.go:26(repo.ListHooks)1342buildbot: (finished: waiting for success: 1343 TOKEN=$(cat /tmp/gitea-token)1344 curl -s -H "Authorization: token $TOKEN" http://localhost:3742/api/v1/repos/gitea-admin/test-flake/hooks | jq '.[0].active' | grep true1345 , in 0.13 seconds)1346(finished: subtest: Verify webhook was created by buildbot, in 0.13 seconds)1347subtest: Push new commit to trigger webhook1348buildbot: must succeed: 1349 cd /tmp/test-flake1350 echo '# Updated via webhook test' >> flake.nix1351 git add flake.nix1352 git commit -m 'Test commit to trigger webhook'1353 git push origin master1354 1355buildbot # [ 37.747075] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-eval1356buildbot # [ 37.751259] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-effect1357buildbot # [ 37.756561] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-register-gcroot1358buildbot # [ 37.759949] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-build1359buildbot # [ 37.762965] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-dependency-failed1360buildbot # [ 37.765221] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-cached-failure1361buildbot # [ 37.767708] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/run-scheduled-effect1362buildbot # [ 37.769793] twistd[1066]: 2026-09-06T07:07:38+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to gitea-admin/test-flake/nix-failed-eval1363buildbot # [ 37.771577] twistd[1066]: 2026-09-06T07:07:38+0000 [-] configuration update complete (took 0.572 seconds)1364buildbot # [ 37.774201] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1365buildbot # [ 37.775335] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1366buildbot # [ 37.776566] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1367buildbot # [ 37.777954] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1368buildbot # [ 37.781275] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1369buildbot # [ 37.782515] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1370buildbot # [ 37.783926] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1371buildbot # [ 37.785348] twistd[1067]: 2026-09-06T07:07:38+0000 [Broker,client] message from master: attached1372buildbot # [ 37.832384] gitea[808]: 2026/09/06 07:07:38 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:48698, 401 Unauthorized in 1.2ms @ repo/githttp.go:455(repo.GetInfoRefs)1373buildbot # [ 37.862416] gitea[808]: 2026/09/06 07:07:38 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:48698, 200 OK in 27.2ms @ repo/githttp.go:455(repo.GetInfoRefs)1374buildbot # Enumerating objects: 5, done.1375buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1376buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1377buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 346 bytes | 346.00 KiB/s, done.1378buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)1379buildbot # [ 38.147212] gitea[808]: 2026/09/06 07:07:38 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 2.6ms @ private/hook_pre_receive.go:110(private.HookPreReceive)1380buildbot # [ 38.464349] gitea[808]: 2026/09/06 07:07:39 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 25.8ms @ private/hook_post_receive.go:101(private.HookPostReceive)1381buildbot # [ 38.484131] gitea[808]: 2026/09/06 07:07:39 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:48698, 200 OK in 596.2ms @ repo/githttp.go:438(repo.ServiceReceivePack)1382buildbot # To http://localhost:3742/gitea-admin/test-flake.git1383buildbot # 8b76689..259f360 master -> master1384buildbot: (finished: must succeed: 1385 cd /tmp/test-flake1386 echo '# Updated via webhook test' >> flake.nix1387 git add flake.nix1388 git commit -m 'Test commit to trigger webhook'1389 git push origin master1390 , in 0.80 seconds)1391(finished: subtest: Push new commit to trigger webhook, in 0.80 seconds)1392subtest: Webhook triggers nix-eval build1393buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1394buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1395buildbot # Dload Upload Total Spent Left Speed1396buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 31390 0 0100 411 100 411 0 0 26471 0 0100 411 100 411 0 0 22498 0 01397buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds)1398buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1399buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1400buildbot # Dload Upload Total Spent Left Speed1401buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 64674 0 0100 937 100 937 0 0 55306 0 0100 937 100 937 0 0 47667 0 01402buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds)1403buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1404buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1405buildbot # Dload Upload Total Spent Left Speed1406buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 23910 0 0100 411 100 411 0 0 18612 0 0100 411 100 411 0 0 15572 0 01407buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1408buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1409buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1410buildbot # Dload Upload Total Spent Left Speed1411buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 81386 0 0100 937 100 937 0 0 67120 0 0100 937 100 937 0 0 56259 0 01412buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds)1413buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1414buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1415buildbot # Dload Upload Total Spent Left Speed1416buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 32720 0 0100 411 100 411 0 0 24299 0 0100 411 100 411 0 0 19726 0 01417buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1418buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1419buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1420buildbot # Dload Upload Total Spent Left Speed1421buildbot # 0 0 0 0 0 0 0 0 0[ 41.008804] twistd[1066]: 2026-09-06T07:07:41+0000 [_GenericHTTPChannelProtocol,9,127.0.0.1] Received event 'push' from gitea1422buildbot # 100 937 100 937 0 0 14452 0 0100 937 100 937 0 0 13874 0 0100 937 100 937 0 0 12602 0 01423buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.15 seconds)1424buildbot # [ 41.052798] twistd[1066]: 2026-09-06T07:07:41+0000 [-] added change with revision 259f360b80957c4514557e60c6ea20d76947650d to database1425buildbot # [ 41.057270] twistd[1066]: 2026-09-06T07:07:41+0000 [-] injected change 11426buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1427buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1428buildbot # Dload Upload Total Spent Left Speed1429buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 17957 0 0100 411 100 411 0 0 15466 0 0100 411 100 411 0 0 13627 0 01430buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1431buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1432buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1433buildbot # Dload Upload Total Spent Left Speed1434buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 68902 0 0100 937 100 937 0 0 57580 0 0100 937 100 937 0 0 48881 0 01435buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1436buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1437buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1438buildbot # Dload Upload Total Spent Left Speed1439buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 20820 0 0100 411 100 411 0 0 17384 0 0100 411 100 411 0 0 15027 0 01440buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1441buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1442buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1443buildbot # Dload Upload Total Spent Left Speed1444buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 63963 0 0100 937 100 937 0 0 53262 0 0100 937 100 937 0 0 45731 0 01445buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1446buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1447buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1448buildbot # Dload Upload Total Spent Left Speed1449buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 31813 0 0100 411 100 411 0 0 22853 0 0100 411 100 411 0 0 18539 0 01450buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1451buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1452buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1453buildbot # Dload Upload Total Spent Left Speed1454buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 64033 0 0100 937 100 937 0 0 53463 0 0100 937 100 937 0 0 46212 0 01455buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1456buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1457buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1458buildbot # Dload Upload Total Spent Left Speed1459buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 31578 0 0100 411 100 411 0 0 23826 0 0100 411 100 411 0 0 18947 0 01460buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1461buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1462buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1463buildbot # Dload Upload Total Spent Left Speed1464buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 56770 0 0100 937 100 937 0 0 48348 0 0100 937 100 937 0 0 42102 0 01465buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)1466buildbot # [ 46.101007] twistd[1066]: 2026-09-06T07:07:46+0000 [-] added buildset 2 to database1467buildbot # [ 46.270581] twistd[1066]: 2026-09-06T07:07:46+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1468buildbot # [ 46.282067] twistd[1066]: 2026-09-06T07:07:46+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild1469buildbot # [ 46.367199] twistd[1066]: 2026-09-06T07:07:47+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1470buildbot # [ 46.372647] twistd[1066]: 2026-09-06T07:07:47+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1471buildbot # [ 46.379040] twistd[1066]: 2026-09-06T07:07:47+0000 [-] sending ping1472buildbot # [ 46.381848] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] ping finished: success1473buildbot # [ 46.383598] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] message from master: ping1474buildbot # [ 46.408772] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1475buildbot # [ 46.410502] twistd[1066]: 2026-09-06T07:07:47+0000 [-] command '['git', '--version']' in dir 'build'1476buildbot # [ 46.417840] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 0): startCommand:shell1477buildbot # [ 46.419318] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1478buildbot # [ 46.424186] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', '--version']): git --version1479buildbot # [ 46.425705] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1480buildbot # [ 46.431045] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1481buildbot # [ 46.433460] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1482buildbot # [ 46.435295] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', '--version']): using PTY: False1483buildbot # [ 46.450729] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0344271484buildbot # [ 46.452826] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a827b0>1485buildbot # [ 46.474876] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01486buildbot # [ 46.510353] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteCommand 'stat' at 250564166212240>: RemoteCommand.run [1]1487buildbot # [ 46.521406] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 1): startCommand:stat1488buildbot # [ 46.522688] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'1489buildbot # [ 46.530755] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xfd7dd21bfb60>1490buildbot # [ 46.534162] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 250564166212240> rc=21491buildbot # [ 46.543086] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteCommand 'listdir' at 250564166540240>: RemoteCommand.run [2]1492buildbot # [ 46.573244] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 2): startCommand:listdir1493buildbot # [ 46.574656] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xfd7dd1a81010>1494buildbot # [ 46.581127] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 250564166540240> rc=01495buildbot # [ 46.585660] twistd[1066]: 2026-09-06T07:07:47+0000 [-] No git repo present, making full clone1496buildbot # [ 46.588991] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [3]1497buildbot # [ 46.592691] twistd[1066]: 2026-09-06T07:07:47+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'1498buildbot # [ 46.621366] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 3): startCommand:shell1499buildbot # [ 46.626585] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand1500buildbot # [ 46.635192] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake . --progress1501buildbot # [ 46.644524] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1502buildbot # [ 46.649892] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}1503buildbot # [ 46.656668] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']1504buildbot # [ 46.662725] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False1505buildbot # [ 46.731189] gitea[808]: 2026/09/06 07:07:47 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:36744, 200 OK in 9.0ms @ repo/githttp.go:455(repo.GetInfoRefs)1506buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1507buildbot # [ 46.750648] gitea[808]: 2026/09/06 07:07:47 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:36744, 200 OK in 15.1ms @ repo/githttp.go:433(repo.ServiceUploadPack)1508buildbot # [ 46.787621] gitea[808]: 2026/09/06 07:07:47 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:36744, 200 OK in 27.9ms @ repo/githttp.go:433(repo.ServiceUploadPack)1509buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1510buildbot # Dload Upload Total Spent Left Speed1511buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 33384 0 [ 46.846693] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.2202641512buildbot # 0100 760 100 760 0 0 23802 0 0100 760 100 [ 46.858066] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd21196d0>1513buildbot # 760 0 0 20471 0 01514buildbot # [ 46.864147] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=01515buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1516buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1517buildbot # [ 46.895367] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']'>: RemoteCommand.run [4]1518buildbot # [ 46.903007] twistd[1066]: 2026-09-06T07:07:47+0000 [-] command '['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']' in dir 'build'1519buildbot # [ 46.907382] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 4): startCommand:shell1520buildbot # [ 46.911864] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): RunProcess._startCommand1521buildbot # [ 46.916696] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): git checkout -f 259f360b80957c4514557e60c6ea20d76947650d1522buildbot # [ 46.919634] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1523buildbot # [ 46.925336] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): watching logfiles {}1524buildbot # [ 46.927575] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): argv: [b'git', b'checkout', b'-f', b'259f360b80957c4514557e60c6ea20d76947650d']1525buildbot # [ 46.931094] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): using PTY: False1526buildbot # [ 46.945453] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): command finished with signal None, exit code 0, elapsedTime: 0.0454171527buildbot # [ 46.947800] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd211a850>1528buildbot # [ 46.962031] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']'> rc=01529buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1530buildbot # Dload Upload Total Spent Left Speed1531buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 44625 0 0100 937 100 937 0 0 38791 0 0100 937 100 937 0 0 35310 0 01532buildbot # [ 47.005059] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [5]1533buildbot # [ 47.006950] twistd[1066]: 2026-09-06T07:07:47+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1534buildbot # [ 47.016406] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 5): startCommand:shell1535buildbot # [ 47.020676] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1536buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.15 seconds)1537buildbot # [ 47.024588] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive1538buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1539buildbot # [ 47.026685] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1540buildbot # [ 47.033274] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1541buildbot # [ 47.035427] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']1542buildbot # [ 47.038682] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False1543buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1544buildbot # Dload Upload Total Spent Left Speed1545buildbot # 0 0 0 0 0 0 0 0 0100 1401 100 1401 0 0 70693 0 0100 1401 100 1401 0 0 59523 0 0100 1401 100 1401 0 0 46630 0 01546buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.10 seconds)1547buildbot # [ 47.189962] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1777771548buildbot # [ 47.194481] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd208a650>1549buildbot # [ 47.199600] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=01550buildbot # [ 47.212089] twistd[1066]: 2026-09-06T07:07:47+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [6]1551buildbot # [ 47.213662] twistd[1066]: 2026-09-06T07:07:47+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1552buildbot # [ 47.236886] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command 6): startCommand:shell1553buildbot # [ 47.240108] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1554buildbot # [ 47.241730] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1555buildbot # [ 47.243195] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1556buildbot # [ 47.250850] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1557buildbot # [ 47.252512] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1558buildbot # [ 47.254451] twistd[1067]: 2026-09-06T07:07:47+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1559buildbot # [ 47.265026] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0251131560buildbot # [ 47.266988] twistd[1067]: 2026-09-06T07:07:47+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd208ab10>1561buildbot # [ 47.290773] twistd[1066]: 2026-09-06T07:07:47+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01562buildbot # [ 47.311188] twistd[1066]: 2026-09-06T07:07:47+0000 [-] Got Git revision 259f360b80957c4514557e60c6ea20d76947650d1563buildbot # [ 47.321765] twistd[1066]: 2026-09-06T07:07:47+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []1564buildbot # [ 47.340525] twistd[1066]: 2026-09-06T07:07:48+0000 [-] step 'git' complete: success (None)1565buildbot # [ 47.349028] twistd[1066]: 2026-09-06T07:07:48+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xe3e3041e4910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xe3e3041ec6e0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xe3e3041ec6e0>)])1566buildbot # [ 47.368075] twistd[1066]: 2026-09-06T07:07:48+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [7]1567buildbot # [ 47.370142] twistd[1066]: 2026-09-06T07:07:48+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1568buildbot # [ 47.379502] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command 7): startCommand:shell1569buildbot # [ 47.384532] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1570buildbot # [ 47.386589] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1571buildbot # [ 47.397187] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1572buildbot # [ 47.404728] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1573buildbot # [ 47.411754] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1574buildbot # [ 47.414896] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1575buildbot # [ 47.432779] twistd[1066]: 2026-09-06T07:07:48+0000 [twisted.web.client._HTTP11ClientFactory#info] Starting factory _HTTP11ClientFactory(<function HTTPConnectionPool._newConnection.<locals>.quiescentCallback at 0xe3e3040e94e0>, <HostnameEndpoint localhost:3742>)1576buildbot # [ 47.447414] twistd[1067]: 2026-09-06T07:07:48+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0687701577buildbot # [ 47.453872] twistd[1067]: 2026-09-06T07:07:48+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd20aeb10>1578buildbot # [ 47.456452] twistd[1066]: 2026-09-06T07:07:48+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01579buildbot # [ 47.458398] twistd[1066]: 2026-09-06T07:07:48+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [8]1580buildbot # [ 47.463409] twistd[1066]: 2026-09-06T07:07:48+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1581buildbot # [ 47.493210] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command 8): startCommand:shell1582buildbot # [ 47.496771] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1583buildbot # [ 47.509080] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1584buildbot # [ 47.521356] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1585buildbot # [ 47.527963] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1586buildbot # [ 47.533586] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1587buildbot # [ 47.542397] twistd[1067]: 2026-09-06T07:07:48+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1588buildbot # [ 47.547521] gitea[808]: 2026/09/06 07:07:48 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/259f360b80957c4514557e60c6ea20d76947650d for [::1]:36750, 201 Created in 82.4ms @ repo/status.go:21(repo.NewCommitStatus)1589buildbot # [ 47.765198] systemd[1]: Started Nix Daemon.1590buildbot # [ 47.870115] nix-daemon[1338]: accepted connection from pid 1336, user buildbot-worker1591buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1592buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1593buildbot # Dload Upload Total Spent Left Speed1594buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 27958 0 0100 760 100 760 0 0 23408 0 0100 760 100 760 0 0 20580 0 01595buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1596buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1597buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1598buildbot # Dload Upload Total Spent Left Speed1599buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 42875 0 0100 937 100 937 0 0 37119 0 0100 937 100 937 0 0 33705 0 01600buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.09 seconds)1601buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1602buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1603buildbot # Dload Upload Total Spent Left Speed1604buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 99.79k 0 0100 1735 100 1735 0 0 83369 0 0100 1735 100 1735 0 0 74119 0 01605buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.08 seconds)1606buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1607buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1608buildbot # Dload Upload Total Spent Left Speed1609buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 37493 0 0100 760 100 760 0 0 32531 0 0100 760 100 760 0 0 28910 0 01610buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1611buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1612buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1613buildbot # Dload Upload Total Spent Left Speed1614buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 63383 0 0100 937 100 937 0 0 53915 0 0100 937 100 937 0 0 46157 0 01615buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1616buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1617buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1618buildbot # Dload Upload Total Spent Left Speed1619buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 119.6k 0 0100 1735 100 1735 0 0 98.04k 0 0100 1735 100 1735 0 0 87657 0 01620buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1621buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1622buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1623buildbot # Dload Upload Total Spent Left Speed1624buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 56018 0 0100 760 100 760 0 0 43035 0 0100 760 100 760 0 0 35732 0 01625buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1626buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1627buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1628buildbot # Dload Upload Total Spent Left Speed1629buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 52901 0 0100 937 100 937 0 0 45656 0 0100 937 100 937 0 0 39747 0 01630buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1631buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1632buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1633buildbot # Dload Upload Total Spent Left Speed1634buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 141.5k 0 0100 1735 100 1735 0 0 114.5k 0 0100 1735 100 1735 0 0 98.45k 0 01635buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1636buildbot # [ 51.970031] nix-daemon[1338]: accepted connection from pid 1374, user buildbot-worker1637buildbot # [ 51.998098] nix-daemon[1338]: accepted connection from pid 1336, user buildbot-worker1638buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1639buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1640buildbot # Dload Upload Total Spent Left Speed1641buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 61944 0 0100 760 100 760 0 0 50085 0 0100 760 100 760 0 0 43216 0 01642buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1643buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1644buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1645buildbot # Dload Upload Total Spent Left Speed1646buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 71011 0 0100 937 100 937 0 0 60017 0 0100 937 100 937 0 0 51087 0 01647buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds)1648buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1649buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1650buildbot # Dload Upload Total Spent Left Speed1651buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 125.2k 0 0100 1735 100 1735 0 0 106.1k 0 0100 1735 100 1735 0 0 93788 0 01652buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1653buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1654buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1655buildbot # Dload Upload Total Spent Left Speed1656buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 59402 0 0100 760 100 760 0 0 43981 0 0100 760 100 760 0 0 35843 0 01657buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1658buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1659buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1660buildbot # Dload Upload Total Spent Left Speed1661buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 60052 0 0100 937 100 937 0 0 49186 0 0100 937 100 937 0 0 41175 0 01662buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1663buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1664buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1665buildbot # Dload Upload Total Spent Left Speed1666buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 138.0k 0 0100 1735 100 1735 0 0 111.9k 0 0100 1735 100 1735 0 0 98866 0 01667buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1668buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1669buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1670buildbot # Dload Upload Total Spent Left Speed1671buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 56425 0 0100 760 100 760 0 0 41450 0 0100 760 100 760 0 0 34099 0 01672buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1673buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1674buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1675buildbot # Dload Upload Total Spent Left Speed1676buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 56767 0 0100 937 100 937 0 0 47886 0 0100 937 100 937 0 0 41735 0 01677buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1678buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1679buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1680buildbot # Dload Upload Total Spent Left Speed1681buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 124.8k 0 0100 1735 100 1735 0 0 105.6k 0 0100 1735 100 1735 0 0 93109 0 01682buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1683buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1684buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1685buildbot # Dload Upload Total Spent Left Speed1686buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 48855 0 0100 760 100 760 0 0 37111 0 0100 760 100 760 0 0 30535 0 01687buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1688buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1689buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1690buildbot # Dload Upload Total Spent Left Speed1691buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 50569 0 0100 937 100 937 0 0 43809 0 0100 937 100 937 0 0 38033 0 01692buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)1693buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1694buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1695buildbot # Dload Upload Total Spent Left Speed1696buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 137.0k 0 0100 1735 100 1735 0 0 114.7k 0 0100 1735 100 1735 0 0 98.15k 0 01697buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)1698buildbot # [ 56.371693] twistd[1067]: 2026-09-06T07:07:57+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 8.8731491699buildbot # [ 56.396811] twistd[1067]: 2026-09-06T07:07:57+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd220b8a0>1700buildbot # [ 56.405185] twistd[1066]: 2026-09-06T07:07:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01701buildbot # [ 56.471566] twistd[1066]: 2026-09-06T07:07:57+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xe3e3041e4910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xe3e3041ec6e0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xe3e3041ec6e0>)]1702buildbot # [ 56.497736] twistd[1066]: 2026-09-06T07:07:57+0000 [-] step 'Evaluate flake' complete: success (None)1703buildbot # [ 56.548484] twistd[1066]: 2026-09-06T07:07:57+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1704buildbot # [ 56.564534] twistd[1066]: 2026-09-06T07:07:57+0000 [-] step 'build flake' complete: success (None)1705buildbot # [ 56.583996] twistd[1066]: 2026-09-06T07:07:57+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3042162a0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e304216350>)): []1706buildbot # [ 56.596589] twistd[1066]: 2026-09-06T07:07:57+0000 [-] step 'Process skipped builds' complete: skipped (None)1707buildbot # [ 56.618041] twistd[1066]: 2026-09-06T07:07:57+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [9]1708buildbot # [ 56.629850] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command 9): startCommand:shell1709buildbot # [ 56.631073] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1710buildbot # [ 56.642116] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/1711buildbot # [ 56.650300] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1712buildbot # [ 56.660400] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}1713buildbot # [ 56.666309] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']1714buildbot # [ 56.677334] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False1715buildbot # [ 56.684615] gitea[808]: 2026/09/06 07:07:57 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/259f360b80957c4514557e60c6ea20d76947650d for [::1]:36750, 201 Created in 115.3ms @ repo/status.go:21(repo.NewCommitStatus)1716buildbot # [ 56.687633] twistd[1066]: 2026-09-06T07:07:57+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'1717buildbot # [ 56.695560] twistd[1067]: 2026-09-06T07:07:57+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0585771718buildbot # [ 56.698927] twistd[1067]: 2026-09-06T07:07:57+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd220bce0>1719buildbot # [ 56.702733] twistd[1066]: 2026-09-06T07:07:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=01720buildbot # [ 56.735292] twistd[1066]: 2026-09-06T07:07:57+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1721buildbot # [ 56.747093] twistd[1066]: 2026-09-06T07:07:57+0000 [-] step 'Cleanup drv paths' complete: success (None)1722buildbot # [ 56.767088] gitea[808]: 2026/09/06 07:07:57 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/259f360b80957c4514557e60c6ea20d76947650d for [::1]:36750, 201 Created in 91.6ms @ repo/status.go:21(repo.NewCommitStatus)1723buildbot # [ 56.774838] twistd[1066]: 2026-09-06T07:07:57+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [10]1724buildbot # [ 56.784677] twistd[1066]: 2026-09-06T07:07:57+0000 [-] command '['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'1725buildbot # [ 56.787141] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command 10): startCommand:shell1726buildbot # [ 56.793290] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand1727buildbot # [ 56.795971] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev 259f360b80957c4514557e60c6ea20d76947650d --branch master --repo gitea-admin/test-flake1728buildbot # [ 56.810954] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)1729buildbot # [ 56.820465] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}1730buildbot # [ 56.829032] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'259f360b80957c4514557e60c6ea20d76947650d', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']1731buildbot # [ 56.833964] twistd[1067]: 2026-09-06T07:07:57+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False1732buildbot # [ 56.890738] gitea[808]: 2026/09/06 07:07:57 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/259f360b80957c4514557e60c6ea20d76947650d for [::1]:36750, 201 Created in 71.0ms @ repo/status.go:21(repo.NewCommitStatus)1733buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1734buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1735buildbot # Dload Upload Total Spent Left Speed1736buildbot # 0 0 0 0 0 0 0 0 0100 760 100 760 0 0 30350 0 0100 760 100 760 0 0 25213 0 0100 760 100 760 0 0 22300 0 01737buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1738buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1739buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1740buildbot # Dload Upload Total Spent Left Speed1741buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 40861 0 0100 937 100 937 0 0 32454 0 0100 937 100 937 0 0 28012 0 01742buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.10 seconds)1743buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1744buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1745buildbot # Dload Upload Total Spent Left Speed1746buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 51170 0 0100 1735 100 1735 0 0 47592 0 0100 1735 100 1735 0 0 35214 0 01747buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.11 seconds)1748buildbot # [ 57.287756] nix-daemon[1338]: accepted connection from pid 1444, user buildbot-worker1749buildbot # [ 57.328066] twistd[1067]: 2026-09-06T07:07:57+0000 [-] (command ['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5448891750buildbot # [ 57.331153] twistd[1067]: 2026-09-06T07:07:57+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd20bb950>1751buildbot # [ 57.339103] twistd[1066]: 2026-09-06T07:07:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=01752buildbot # [ 57.374533] twistd[1066]: 2026-09-06T07:07:58+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3041da610>, logEnviron=False)): []1753buildbot # [ 57.387049] twistd[1066]: 2026-09-06T07:07:58+0000 [-] step 'Evaluate effects' complete: success (None)1754buildbot # [ 57.431011] twistd[1066]: 2026-09-06T07:07:58+0000 [-] added buildset 3 to database1755buildbot # [ 57.474419] gitea[808]: 2026/09/06 07:07:58 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/259f360b80957c4514557e60c6ea20d76947650d for [::1]:36750, 201 Created in 46.7ms @ repo/status.go:21(repo.NewCommitStatus)1756buildbot # [ 57.563819] twistd[1066]: 2026-09-06T07:07:58+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>1757buildbot # [ 57.569891] twistd[1066]: 2026-09-06T07:07:58+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild1758buildbot # [ 57.642248] twistd[1066]: 2026-09-06T07:07:58+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1759buildbot # [ 57.646808] twistd[1066]: 2026-09-06T07:07:58+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:1 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>1760buildbot # [ 57.651698] twistd[1066]: 2026-09-06T07:07:58+0000 [-] sending ping1761buildbot # [ 57.654349] twistd[1066]: 2026-09-06T07:07:58+0000 [Broker,0,127.0.0.1] ping finished: success1762buildbot # [ 57.655819] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] message from master: ping1763buildbot # [ 57.676283] twistd[1066]: 2026-09-06T07:07:58+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [11]1764buildbot # [ 57.677769] twistd[1066]: 2026-09-06T07:07:58+0000 [-] command '['git', '--version']' in dir 'build'1765buildbot # [ 57.678956] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 11): startCommand:shell1766buildbot # [ 57.683876] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1767buildbot # [ 57.688094] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): git --version1768buildbot # [ 57.689452] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1769buildbot # [ 57.691670] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1770buildbot # [ 57.696139] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1771buildbot # [ 57.697770] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): environment:1772buildbot # [ 57.699330] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1773buildbot # [ 57.700469] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1774buildbot # [ 57.704121] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',1775buildbot # [ 57.704968] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',1776buildbot # [ 57.705922] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1777buildbot # [ 57.707239] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1778buildbot # [ 57.708464] twistd[1067]: 'JOURNAL_STREAM': '9:12698',1779buildbot # [ 57.709474] twistd[1067]: 'LANG': 'en_US.UTF-8',1780buildbot # [ 57.710257] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',1781buildbot # [ 57.711910] twistd[1067]: 'LOGNAME': 'buildbot-worker',1782buildbot # [ 57.713038] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1783buildbot # [ 57.714033] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1784buildbot # [ 57.715504] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1785buildbot # [ 57.717018] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',1786buildbot # [ 57.740891] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1787buildbot # [ 57.742537] twistd[1067]: 'PYTHONNOUSERSITE': 'true',1788buildbot # [ 57.743374] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',1789buildbot # [ 57.746168] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',1790buildbot # [ 57.748389] twistd[1067]: 'SHLVL': '0',1791buildbot # [ 57.749079] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',1792buildbot # [ 57.749883] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',1793buildbot # [ 57.751272] twistd[1067]: 'USER': 'buildbot-worker',1794buildbot # [ 57.752064] twistd[1067]: 'WORKER_COUNT': '0',1795buildbot # [ 57.752830] twistd[1067]: 'WORKER_NAME': 'local-worker',1796buildbot # [ 57.753556] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1797buildbot # [ 57.754878] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', '--version']): using PTY: False1798buildbot # [ 57.762016] twistd[1067]: 2026-09-06T07:07:58+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0750091799buildbot # [ 57.763818] twistd[1067]: 2026-09-06T07:07:58+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd20bbb50>1800buildbot # [ 57.767153] twistd[1066]: 2026-09-06T07:07:58+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01801buildbot # [ 57.785201] twistd[1066]: 2026-09-06T07:07:58+0000 [-] <RemoteCommand 'stat' at 250564198862992>: RemoteCommand.run [12]1802buildbot # [ 57.805449] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 12): startCommand:stat1803buildbot # [ 57.806701] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 12): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'1804buildbot # [ 57.814111] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xfd7dd211ad50>1805buildbot # [ 57.818088] twistd[1066]: 2026-09-06T07:07:58+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 250564198862992> rc=21806buildbot # [ 57.826023] twistd[1066]: 2026-09-06T07:07:58+0000 [-] <RemoteCommand 'listdir' at 250564198862672>: RemoteCommand.run [13]1807buildbot # [ 57.857397] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 13): startCommand:listdir1808buildbot # [ 57.858830] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xfd7dd211aad0>1809buildbot # [ 57.865921] twistd[1066]: 2026-09-06T07:07:58+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 250564198862672> rc=01810buildbot # [ 57.870665] twistd[1066]: 2026-09-06T07:07:58+0000 [-] No git repo present, making full clone1811buildbot # [ 57.873614] twistd[1066]: 2026-09-06T07:07:58+0000 [-] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']'>: RemoteCommand.run [14]1812buildbot # [ 57.878000] twistd[1066]: 2026-09-06T07:07:58+0000 [-] command '['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']' in dir 'build'1813buildbot # [ 57.905315] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 14): startCommand:shell1814buildbot # [ 57.911356] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): RunProcess._startCommand1815buildbot # [ 57.918825] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): git clone --branch master http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake . --progress1816buildbot # [ 57.928164] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1817buildbot # [ 57.933017] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): watching logfiles {}1818buildbot # [ 57.937034] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): argv: [b'git', b'clone', b'--branch', b'master', b'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', b'.', b'--progress']1819buildbot # [ 57.946240] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): environment:1820buildbot # [ 57.950276] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1821buildbot # [ 57.951519] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1822buildbot # [ 57.953501] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',1823buildbot # [ 57.954592] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',1824buildbot # [ 57.956194] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1825buildbot # [ 57.958061] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1826buildbot # [ 57.959420] twistd[1067]: 'JOURNAL_STREAM': '9:12698',1827buildbot # [ 57.960888] twistd[1067]: 'LANG': 'en_US.UTF-8',1828buildbot # [ 57.962020] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',1829buildbot # [ 57.964092] twistd[1067]: 'LOGNAME': 'buildbot-worker',1830buildbot # [ 57.966016] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1831buildbot # [ 57.967304] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1832buildbot # [ 57.969971] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1833buildbot # [ 57.972260] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',1834buildbot # [ 57.998101] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1835buildbot # [ 57.999527] twistd[1067]: 'PYTHONNOUSERSITE': 'true',1836buildbot # [ 58.000535] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',1837buildbot # [ 58.002346] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',1838buildbot # [ 58.003357] twistd[1067]: 'SHLVL': '0',1839buildbot # [ 58.004091] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',1840buildbot # [ 58.004900] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',1841buildbot # [ 58.006501] twistd[1067]: 'USER': 'buildbot-worker',1842buildbot # [ 58.007335] twistd[1067]: 'WORKER_COUNT': '0',1843buildbot # [ 58.008104] twistd[1067]: 'WORKER_NAME': 'local-worker',1844buildbot # [ 58.009101] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1845buildbot # [ 58.010560] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): using PTY: False1846buildbot # [ 58.068621] gitea[808]: 2026/09/06 07:07:58 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:52776, 200 OK in 8.9ms @ repo/githttp.go:455(repo.GetInfoRefs)1847buildbot # [ 58.080725] gitea[808]: 2026/09/06 07:07:58 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:52776, 200 OK in 7.9ms @ repo/githttp.go:433(repo.ServiceUploadPack)1848buildbot # [ 58.104118] gitea[808]: 2026/09/06 07:07:58 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:52776, 200 OK in 16.8ms @ repo/githttp.go:433(repo.ServiceUploadPack)1849buildbot # [ 58.138112] twistd[1067]: 2026-09-06T07:07:58+0000 [-] (command ['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.2288021850buildbot # [ 58.146788] twistd[1067]: 2026-09-06T07:07:58+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd20c3f20>1851buildbot # [ 58.151622] twistd[1066]: 2026-09-06T07:07:58+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'clone', '--branch', 'master', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '.', '--progress']'> rc=01852buildbot # [ 58.178202] twistd[1066]: 2026-09-06T07:07:58+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']'>: RemoteCommand.run [15]1853buildbot # [ 58.181377] twistd[1066]: 2026-09-06T07:07:58+0000 [-] command '['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']' in dir 'build'1854buildbot # [ 58.189050] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command 15): startCommand:shell1855buildbot # [ 58.193851] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): RunProcess._startCommand1856buildbot # [ 58.195876] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): git checkout -f 259f360b80957c4514557e60c6ea20d76947650d1857buildbot # [ 58.202053] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1858buildbot # [ 58.207165] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): watching logfiles {}1859buildbot # [ 58.209578] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): argv: [b'git', b'checkout', b'-f', b'259f360b80957c4514557e60c6ea20d76947650d']1860buildbot # [ 58.212548] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): environment:1861buildbot # [ 58.216979] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1862buildbot # [ 58.218004] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1863buildbot # [ 58.219130] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',1864buildbot # [ 58.219915] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',1865buildbot # [ 58.221147] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1866buildbot # [ 58.222585] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1867buildbot # [ 58.223910] twistd[1067]: 'JOURNAL_STREAM': '9:12698',1868buildbot # [ 58.224908] twistd[1067]: 'LANG': 'en_US.UTF-8',1869buildbot # [ 58.225849] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',1870buildbot # [ 58.227534] twistd[1067]: 'LOGNAME': 'buildbot-worker',1871buildbot # [ 58.228520] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1872buildbot # [ 58.229620] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1873buildbot # [ 58.231136] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1874buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1875buildbot # [ 58.232344] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',1876buildbot # [ 58.257489] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1877buildbot # [ 58.259913] twistd[1067]: 'PYTHONNOUSERSITE': 'true',1878buildbot # [ 58.262655] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',1879buildbot # [ 58.266879] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',1880buildbot # [ 58.268351] twistd[1067]: 'SHLVL': '0',1881buildbot # [ 58.269176] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',1882buildbot # [ 58.270980] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',1883buildbot # [ 58.275368] twistd[1067]: 'USER': 'buildbot-worker',1884buildbot # [ 58.286433] twistd[1067]: 'WORKER_COUNT': '0',1885buildbot # [ 58.287098] twistd[1067]: 'WORKER_NAME': 'local-worker',1886buildbot # [ 58.287838] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1887buildbot # [ 58.293440] twistd[1067]: 2026-09-06T07:07:58+0000 [Broker,client] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): using PTY: False1888buildbot # [ 58.296672] twistd[1067]: 2026-09-06T07:07:58+0000 [-] (command ['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']): command finished with signal None, exit code 0, elapsedTime: 0.0863771889buildbot # [ 58.301105] twistd[1067]: 2026-09-06T07:07:58+0000 [-] (command 15): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ac0230>1890buildbot # [ 58.304551] twistd[1066]: 2026-09-06T07:07:58+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '259f360b80957c4514557e60c6ea20d76947650d']'> rc=01891buildbot # [ 58.345568] twistd[1066]: 2026-09-06T07:07:59+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [16]1892buildbot # [ 58.352836] twistd[1066]: 2026-09-06T07:07:59+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1893buildbot # [ 58.354427] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command 16): startCommand:shell1894buildbot # [ 58.355595] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1895buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1896buildbot # Dload Upload Total Spent Left Speed1897buildbot # 0 0 0 0[ 58.372176] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): git submodule update --init --recursive1898buildbot # [ 58.374199] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1899buildbot # 0 0 0 0 0[ 58.383892] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1900buildbot # [ 58.392222] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive']1901buildbot # [ 58.394589] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): environment:1902buildbot # 100 1110 100 1110 0 0 21336 0 [ 58.402854] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1903buildbot # 0100 1110 100 1110 0 0 18940 0 0100 1110 100 1110 0 0 [ 58.408232] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1904buildbot # [ 58.409437] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',1905buildbot # [ 58.410223] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',1906buildbot # [ 58.411178] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1907buildbot # 18191 0 01908buildbot # [ 58.419377] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1909buildbot # [ 58.424240] twistd[1067]: 'JOURNAL_STREAM': '9:12698',1910buildbot # [ 58.426011] twistd[1067]: 'LANG': 'en_US.UTF-8',1911buildbot # [ 58.426802] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',1912buildbot # [ 58.429455] twistd[1067]: 'LOGNAME': 'buildbot-worker',1913buildbot # [ 58.430507] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1914buildbot # [ 58.431786] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1915buildbot # [ 58.434370] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1916buildbot # [ 58.435613] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',1917buildbot # [ 58.462832] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1918buildbot # [ 58.464753] twistd[1067]: 'PYTHONNOUSERSITE': 'true',1919buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.23 seconds)1920buildbot # [ 58.467455] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',1921buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1922buildbot # [ 58.470319] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',1923buildbot # [ 58.471975] twistd[1067]: 'SHLVL': '0',1924buildbot # [ 58.474566] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',1925buildbot # [ 58.477036] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',1926buildbot # [ 58.482614] twistd[1067]: 'USER': 'buildbot-worker',1927buildbot # [ 58.485260] twistd[1067]: 'WORKER_COUNT': '0',1928buildbot # [ 58.487085] twistd[1067]: 'WORKER_NAME': 'local-worker',1929buildbot # [ 58.489783] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1930buildbot # [ 58.491208] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive']): using PTY: False1931buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1932buildbot # Dload Upload Total Spent Left Speed1933buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 40294 0 0100 937 100 937 0 0 35853 0 0100 937 100 937 0 0 29363 0 01934buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.11 seconds)1935buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1936buildbot # [ 58.640240] twistd[1067]: 2026-09-06T07:07:59+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.2754521937buildbot # [ 58.645044] twistd[1067]: 2026-09-06T07:07:59+0000 [-] (command 16): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a89710>1938buildbot # [ 58.652523] twistd[1066]: 2026-09-06T07:07:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive']'> rc=01939buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1940buildbot # Dload Upload Total Spent Left Speed1941buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 75297 0 0100 1735 100 1735 0 0 63272 0 0100 1735 100 1735 0 0 56725 0 01942buildbot # [ 58.702005] twistd[1066]: 2026-09-06T07:07:59+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [17]1943buildbot # [ 58.710261] twistd[1066]: 2026-09-06T07:07:59+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1944buildbot # [ 58.711994] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command 17): startCommand:shell1945buildbot # [ 58.713455] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1946buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.13 seconds)1947buildbot # [ 58.719614] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1948buildbot # [ 58.721306] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1949buildbot # [ 58.725272] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1950buildbot # [ 58.726811] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1951buildbot # [ 58.728866] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:1952buildbot # [ 58.730572] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',1953buildbot # [ 58.731620] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',1954buildbot # [ 58.735593] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',1955buildbot # [ 58.736870] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',1956buildbot # [ 58.737922] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',1957buildbot # [ 58.739727] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1958buildbot # [ 58.740987] twistd[1067]: 'JOURNAL_STREAM': '9:12698',1959buildbot # [ 58.742028] twistd[1067]: 'LANG': 'en_US.UTF-8',1960buildbot # [ 58.742801] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',1961buildbot # [ 58.744636] twistd[1067]: 'LOGNAME': 'buildbot-worker',1962buildbot # [ 58.745633] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',1963buildbot # [ 58.746633] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',1964buildbot # [ 58.748598] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',1965buildbot # [ 58.750536] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',1966buildbot # [ 58.775685] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',1967buildbot # [ 58.777267] twistd[1067]: 'PYTHONNOUSERSITE': 'true',1968buildbot # [ 58.778050] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',1969buildbot # [ 58.779661] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',1970buildbot # [ 58.780722] twistd[1067]: 'SHLVL': '0',1971buildbot # [ 58.781349] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',1972buildbot # [ 58.782059] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',1973buildbot # [ 58.783345] twistd[1067]: 'USER': 'buildbot-worker',1974buildbot # [ 58.790619] twistd[1067]: 'WORKER_COUNT': '0',1975buildbot # [ 58.791464] twistd[1067]: 'WORKER_NAME': 'local-worker',1976buildbot # [ 58.793192] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}1977buildbot # [ 58.794595] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1978buildbot # [ 58.796743] twistd[1067]: 2026-09-06T07:07:59+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0769631979buildbot # [ 58.800159] twistd[1067]: 2026-09-06T07:07:59+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a899b0>1980buildbot # [ 58.802354] twistd[1066]: 2026-09-06T07:07:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01981buildbot # [ 58.819697] twistd[1066]: 2026-09-06T07:07:59+0000 [-] Got Git revision 259f360b80957c4514557e60c6ea20d76947650d1982buildbot # [ 58.832242] twistd[1066]: 2026-09-06T07:07:59+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []1983buildbot # [ 58.850385] twistd[1066]: 2026-09-06T07:07:59+0000 [-] step 'git' complete: success (None)1984buildbot # [ 58.868542] twistd[1066]: 2026-09-06T07:07:59+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [18]1985buildbot # [ 58.877206] twistd[1066]: 2026-09-06T07:07:59+0000 [-] command '['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'1986buildbot # [ 58.879798] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command 18): startCommand:shell1987buildbot # [ 58.883262] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand1988buildbot # [ 58.886768] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev 259f360b80957c4514557e60c6ea20d76947650d --branch master --repo gitea-admin/test-flake test-effect1989buildbot # [ 58.891277] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)1990buildbot # [ 58.897592] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}1991buildbot # [ 58.900472] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'259f360b80957c4514557e60c6ea20d76947650d', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake', b'test-effect']1992buildbot # [ 58.905195] twistd[1067]: 2026-09-06T07:07:59+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False1993buildbot # [ 59.222458] nix-daemon[1338]: accepted connection from pid 1505, user buildbot-worker1994buildbot # [ 59.281352] twistd[1067]: 2026-09-06T07:07:59+0000 [-] (command ['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.4140661995buildbot # [ 59.290588] twistd[1067]: 2026-09-06T07:07:59+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd20f24e0>1996buildbot # [ 59.294285] twistd[1066]: 2026-09-06T07:07:59+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=11997buildbot # [ 59.328763] twistd[1066]: 2026-09-06T07:07:59+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []1998buildbot # [ 59.340032] twistd[1066]: 2026-09-06T07:08:00+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])1999buildbot # [ 59.344050] twistd[1066]: 2026-09-06T07:08:00+0000 [-] <Build gitea-admin/test-flake/run-effect number:1 results:failure>: build finished2000buildbot # [ 59.356102] twistd[1066]: 2026-09-06T07:08:00+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2001buildbot # [ 59.542252] twistd[1066]: 2026-09-06T07:08:00+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []2002buildbot # [ 59.560798] twistd[1066]: 2026-09-06T07:08:00+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])2003buildbot # [ 59.590611] twistd[1066]: 2026-09-06T07:08:00+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [19]2004buildbot # [ 59.597889] twistd[1066]: 2026-09-06T07:08:00+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']' in dir 'build'2005buildbot # [ 59.608671] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command 19): startCommand:shell2006buildbot # [ 59.609858] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2007buildbot # [ 59.615518] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): buildbot-effects list-schedules --rev 259f360b80957c4514557e60c6ea20d76947650d --branch master --repo gitea-admin/test-flake2008buildbot # [ 59.621812] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2009buildbot # [ 59.626016] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2010buildbot # [ 59.632127] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'259f360b80957c4514557e60c6ea20d76947650d', b'--branch', b'master', b'--repo', b'gitea-admin/test-flake']2011buildbot # [ 59.637277] twistd[1067]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): using PTY: False2012buildbot # [ 59.678128] gitea[808]: 2026/09/06 07:08:00 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/259f360b80957c4514557e60c6ea20d76947650d for [::1]:36750, 201 Created in 101.7ms @ repo/status.go:21(repo.NewCommitStatus)2013buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2014buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2015buildbot # Dload Upload Total Spent Left Speed2016buildbot # 0 0 0 0 0 0 0 0 0100 1186 100 1186 0 0 47142 0 0100 1186 100 1186 0 0 42977 0 0100 1186 100 1186 0 0 33915 0 02017buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2018buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2019buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2020buildbot # Dload Upload Total Spent Left Speed2021buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 33205 0 0100 937 100 937 0 0 30538 0 0100 937 100 937 0 0 25209 0 02022buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.10 seconds)2023buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2024buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2025buildbot # Dload Upload Total Spent Left Speed2026buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 80872 0 0100 2095 100 2095 0 0 55759 0 0100 2095 100 2095 0 0 52424 0 02027buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.10 seconds)2028buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2029buildbot # [ 60.082428] nix-daemon[1338]: accepted connection from pid 1530, user buildbot-worker2030buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2031buildbot # Dload Upload Total Spent Left Speed2032buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 74447 0 0100 1735 100 1735 0 0 67362 0 0100 1735 100 1735 0 0 54894 0 02033buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.12 seconds)2034buildbot # [ 60.147160] twistd[1067]: 2026-09-06T07:08:00+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5479542035buildbot # [ 60.155629] twistd[1067]: 2026-09-06T07:08:00+0000 [-] (command 19): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a54e90>2036buildbot # [ 60.160504] twistd[1066]: 2026-09-06T07:08:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '259f360b80957c4514557e60c6ea20d76947650d', '--branch', 'master', '--repo', 'gitea-admin/test-flake']'> rc=02037buildbot # [ 60.194284] twistd[1066]: 2026-09-06T07:08:00+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3041d8880>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3041d9170>, logEnviron=False)): []2038buildbot # [ 60.211034] twistd[1066]: 2026-09-06T07:08:00+0000 [-] step 'Evaluate scheduled effects' complete: success (None)2039buildbot # [ 60.213189] twistd[1066]: 2026-09-06T07:08:00+0000 [-] <Build gitea-admin/test-flake/nix-eval number:1 results:failure>: build finished2040buildbot # [ 60.222019] twistd[1066]: 2026-09-06T07:08:00+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2041buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2042buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2043buildbot # Dload Upload Total Spent Left Speed2044buildbot # 0 0 0 0 0 0 0 0 0100 1195 100 1195 0 0 94436 0 0100 1195 100 1195 0 0 70970 0 0100 1195 100 1195 0 0 57762 0 02045buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2046buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2047buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2048buildbot # Dload Upload Total Spent Left Speed2049buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 62400 0 0100 937 100 937 0 0 51725 0 0100 937 100 937 0 0 44697 0 02050buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2051buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2052buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2053buildbot # Dload Upload Total Spent Left Speed2054buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 172.0k 0 0100 2095 100 2095 0 0 142.5k 0 0100 2095 100 2095 0 0 119.5k 0 02055buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2056buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2057buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2058buildbot # Dload Upload Total Spent Left Speed2059buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 141.9k 0 0100 1735 100 1735 0 0 117.4k 0 0100 1735 100 1735 0 0 100.8k 0 02060buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2061buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2062buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2063buildbot # Dload Upload Total Spent Left Speed2064buildbot # 0 0 0 0 0 0 0 0 0100 3497 100 3497 0 0 247.2k 0 0100 3497 100 3497 0 0 209.8k 0 0100 3497 100 3497 0 0 179.1k 0 02065buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.06 seconds)2066buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps2067buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2068buildbot # Dload Upload Total Spent Left Speed2069buildbot # 0 0 0 0 0 0 0 0 0100 3497 100 3497 0 0 267.0k 0 0100 3497 100 3497 0 0 224.4k 0 0100 3497 100 3497 0 0 190.0k 0 02070buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/steps, in 0.06 seconds)2071(finished: subtest: Webhook triggers nix-eval build, in 23.06 seconds)2072subtest: PR with effects_on_pull_requests runs effects2073buildbot: must succeed: 2074 cd /tmp/test-flake2075 git checkout -b test-pr-effects2076 echo '# PR change' >> flake.nix2077 git add flake.nix2078 git commit -m 'PR to test effects on pull requests'2079 git push origin test-pr-effects2080 2081buildbot # Switched to a new branch 'test-pr-effects'2082buildbot # [ 61.653309] gitea[808]: 2026/09/06 07:08:02 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:39512, 401 Unauthorized in 1.8ms @ repo/githttp.go:455(repo.GetInfoRefs)2083buildbot # [ 61.683588] gitea[808]: 2026/09/06 07:08:02 HTTPRequest [I] router: completed GET /gitea-admin/test-flake.git/info/refs?service=git-receive-pack for [::1]:39512, 200 OK in 27.3ms @ repo/githttp.go:455(repo.GetInfoRefs)2084buildbot # Enumerating objects: 5, done.2085buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.2086buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.2087buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 340 bytes | 340.00 KiB/s, done.2088buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)2089buildbot # [ 61.944192] gitea[808]: 2026/09/06 07:08:02 HTTPRequest [I] router: completed POST /api/internal/hook/pre-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 3.1ms @ private/hook_pre_receive.go:110(private.HookPreReceive)2090buildbot # [ 62.255481] gitea[808]: 2026/09/06 07:08:02 HTTPRequest [I] router: completed POST /api/internal/hook/post-receive/gitea-admin/test-flake for 127.0.0.1:0, 200 OK in 21.0ms @ private/hook_post_receive.go:101(private.HookPostReceive)2091buildbot # remote:2092buildbot # remote: Create a new pull request for 'test-pr-effects':2093buildbot # remote: http://localhost:3742/gitea-admin/test-flake/pulls/new/test-pr-effects2094buildbot # [ 62.276807] gitea[808]: 2026/09/06 07:08:02 HTTPRequest [I] router: completed POST /gitea-admin/test-flake.git/git-receive-pack for [::1]:39512, 200 OK in 565.6ms @ repo/githttp.go:438(repo.ServiceReceivePack)2095buildbot # remote:2096buildbot # To http://localhost:3742/gitea-admin/test-flake.git2097buildbot # * [new branch] test-pr-effects -> test-pr-effects2098buildbot: (finished: must succeed: 2099 cd /tmp/test-flake2100 git checkout -b test-pr-effects2101 echo '# PR change' >> flake.nix2102 git add flake.nix2103 git commit -m 'PR to test effects on pull requests'2104 git push origin test-pr-effects2105 , in 0.73 seconds)2106buildbot: must succeed: 2107 TOKEN=$(cat /tmp/gitea-token)2108 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2109 2110buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2111buildbot # Dload Upload Total Spent Left Speed2112buildbot # 0 0 0 0 0 0 0 0 0100 6455 0 6387 100 68 8955 95 0100 6455 0 6387 100 68 8953 95 0100 6455 0 6387 100 68 8952 95 02113buildbot # [ 63.060414] gitea[808]: 2026/09/06 07:08:03 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/pulls for [::1]:39544, 201 Created in 705.0ms @ repo/pull.go:370(repo.CreatePullRequest)2114buildbot: (finished: must succeed: 2115 TOKEN=$(cat /tmp/gitea-token)2116 curl -X POST -H "Authorization: token $TOKEN" -H "Content-Type: application/json" -d '{"title":"Test PR effects","head":"test-pr-effects","base":"master"}' http://localhost:3742/api/v1/repos/gitea-admin/test-flake/pulls2117 , in 0.77 seconds)2118buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2119buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2120buildbot # Dload Upload Total Spent Left Speed2121buildbot # 0 0 0 0 0 0 0 0 0100 1195 100 1195 0 0 92981 0 0100 1195 100 1195 0 0 77997 0 0100 1195 100 1195 0 0 66098 0 02122buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds)2123buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2124buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2125buildbot # Dload Upload Total Spent Left Speed2126buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 43007 0 0100 937 100 937 0 0 38100 0 0100 937 100 937 0 0 27972 0 02127buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.09 seconds)2128buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2129buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2130buildbot # Dload Upload Total Spent Left Speed2131buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 97668 0 0100 2095 100 2095 0 0 79718 0 0100 2095 100 2095 0 0 72436 0 02132buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.09 seconds)2133buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2134buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2135buildbot # Dload Upload Total Spent Left Speed2136buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 134.7k 0 0100 1735 100 1735 0 0 112.8k 0 0100 1735 100 1735 0 0 97603 0 02137buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2138buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2139buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2140buildbot # Dload Upload Total Spent Left Speed2141buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 141.3k 0 0100 1735 100 1735 0 0 114.4k 0 0100 1735 100 1735 0 0 98.54k 0 02142buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2143buildbot # [ 64.087501] twistd[1066]: 2026-09-06T07:08:04+0000 [_GenericHTTPChannelProtocol,64,127.0.0.1] Received event 'pull_request' from gitea2144buildbot # [ 64.137859] twistd[1066]: 2026-09-06T07:08:04+0000 [-] added change with revision 85a19a95810dd141218f06f69f0799ad65280d4f to database2145buildbot # [ 64.147014] twistd[1066]: 2026-09-06T07:08:04+0000 [-] injected change 22146buildbot # [ 64.175315] twistd[1066]: 2026-09-06T07:08:04+0000 [_GenericHTTPChannelProtocol,65,127.0.0.1] Received event 'push' from gitea2147buildbot # [ 64.203452] twistd[1066]: 2026-09-06T07:08:04+0000 [-] added change with revision 85a19a95810dd141218f06f69f0799ad65280d4f to database2148buildbot # [ 64.208274] twistd[1066]: 2026-09-06T07:08:04+0000 [-] injected change 32149buildbot # [ 64.210986] twistd[1066]: 2026-09-06T07:08:04+0000 [-] added buildset 4 to database2150buildbot # [ 64.372712] twistd[1066]: 2026-09-06T07:08:05+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>2151buildbot # [ 64.384150] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <Build gitea-admin/test-flake/nix-eval number:None results:success>.startBuild2152buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2153buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2154buildbot # Dload Upload Total Spent Left Speed2155buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 88047 0 0100 1544 100 1544 0 0 70181 0 0100 1544 100 1544 0 0 55326 0 02156buildbot # [ 64.542465] twistd[1066]: 2026-09-06T07:08:05+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2157buildbot # [ 64.547935] twistd[1066]: 2026-09-06T07:08:05+0000 [-] starting build <Build gitea-admin/test-flake/nix-eval number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/nix-eval' worker='local-worker-000' state=BUILDING>2158buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2159buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2160buildbot # [ 64.555637] twistd[1066]: 2026-09-06T07:08:05+0000 [-] sending ping2161buildbot # [ 64.559978] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] ping finished: success2162buildbot # [ 64.561703] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] message from master: ping2163buildbot # [ 64.595420] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [20]2164buildbot # [ 64.603900] twistd[1066]: 2026-09-06T07:08:05+0000 [-] command '['git', '--version']' in dir 'build'2165buildbot # [ 64.607998] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 20): startCommand:shell2166buildbot # [ 64.611393] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2167buildbot # [ 64.617158] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '--version']): git --version2168buildbot # [ 64.623749] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2169buildbot # [ 64.626852] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2170buildbot # [ 64.628898] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2171buildbot # [ 64.633289] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '--version']): using PTY: False2172buildbot # % Total % Received % Xferd Average S[ 64.648161] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0462472173buildbot # [ 64.649963] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command 20): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a550d0>2174buildbot # peed Time Time Time Current2175buildbot # Dload Upload Total Spent Left Speed2176buildbot # 0 0 [ 64.657843] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02177buildbot # 0 0 0 0 0 0 0100 937 100 937 0 0 38177 0 0100 937 100 937 0 0 34733 0 0100 937 100 937 0 0 30322 0 02178buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.14 seconds)2179buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2180buildbot # [ 64.706511] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <RemoteCommand 'stat' at 250564165540816>: RemoteCommand.run [21]2181buildbot # [ 64.712404] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 21): startCommand:stat2182buildbot # [ 64.713648] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 21): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xfd7dd211ae90>2183buildbot # [ 64.715752] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 250564165540816> rc=02184buildbot # [ 64.727527] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <RemoteCommand 'stat' at 250564165541136>: RemoteCommand.run [22]2185buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2186buildbot # Dload Upload Total Spent Left Speed2187buildbot # 0 0 0 0 0 0 0 0 0[ 64.761226] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 22): startCommand:stat2188buildbot # [ 64.762451] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 22): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build/.buildbot-patched'2189buildbot # 100 2095 100 2095 0 0 101.3k 0 [ 64.772772] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 22): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xfd7dd2089ba0>2190buildbot # [ 64.774933] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 250564165541136> rc=22191buildbot # 0100 2095 100 2095 0 0 76270 0 0100 2095 100 2095 0 0 68522 0 02192buildbot # [ 64.793523] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']'>: RemoteCommand.run [23]2193buildbot # [ 64.800361] twistd[1066]: 2026-09-06T07:08:05+0000 [-] command '['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']' in dir 'build'2194buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.12 seconds)2195buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2196buildbot # [ 64.811571] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 23): startCommand:shell2197buildbot # [ 64.813244] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): RunProcess._startCommand2198buildbot # [ 64.822550] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): git fetch -f -t http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake 259f360b80957c4514557e60c6ea20d76947650d 85a19a95810dd141218f06f69f0799ad65280d4f +refs/heads/master:refs/remotes/origin/master2199buildbot # [ 64.831856] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2200buildbot # [ 64.839954] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): watching logfiles {}2201buildbot # [ 64.850980] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): argv: [b'git', b'fetch', b'-f', b'-t', b'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', b'259f360b80957c4514557e60c6ea20d76947650d', b'85a19a95810dd141218f06f69f0799ad65280d4f', b'+refs/heads/master:refs/remotes/origin/master']2202buildbot # [ 64.862266] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): using PTY: False2203buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2204buildbot # Dload Upload Total Spent Left Speed2205buildbot # 0 0 0 0 0 0 0 0 0[ 64.932998] gitea[808]: 2026/09/06 07:08:05 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:39560, 200 OK in 15.4ms @ repo/githttp.go:455(repo.GetInfoRefs)2206buildbot # 100 1735 100 1735 0 0 61085 0 0100 1735 100 1735 0 0 56261 0 0100 1735 100 [ 64.952936] gitea[808]: 2026/09/06 07:08:05 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:39560, 200 OK in 16.6ms @ repo/githttp.go:433(repo.ServiceUploadPack)2207buildbot # 1735 0 0 44618 0 02208buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.16 seconds)2209buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2210buildbot # [ 64.977894] gitea[808]: 2026/09/06 07:08:05 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:39560, 200 OK in 22.1ms @ repo/githttp.go:433(repo.ServiceUploadPack)2211buildbot # [ 65.021212] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command ['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']): command finished with signal None, exit code 0, elapsedTime: 0.2071722212buildbot # [ 65.033821] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command 23): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1aac5d0>2213buildbot # % Total % Received % Xferd Average Speed Time [ 65.042522] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '-t', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', '259f360b80957c4514557e60c6ea20d76947650d', '85a19a95810dd141218f06f69f0799ad65280d4f', '+refs/heads/master:refs/remotes/origin/master']'> rc=02214buildbot # Time Time Current2215buildbot # Dload Upload Total Spent Left Speed2216buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 60436 0 0100 1735 100 1735 0 0 54740 0 0100 1735 100 1735 0 0 50879 0 02217buildbot # [ 65.080574] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']'>: RemoteCommand.run [24]2218buildbot # [ 65.088468] twistd[1066]: 2026-09-06T07:08:05+0000 [-] command '['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']' in dir 'build'2219buildbot # [ 65.090333] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 24): startCommand:shell2220buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.13 seconds)2221buildbot # [ 65.091490] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): RunProcess._startCommand2222buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2223buildbot # [ 65.098756] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): git checkout --detach -f 85a19a95810dd141218f06f69f0799ad65280d4f2224buildbot # [ 65.103622] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2225buildbot # [ 65.107229] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): watching logfiles {}2226buildbot # [ 65.112115] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): argv: [b'git', b'checkout', b'--detach', b'-f', b'85a19a95810dd141218f06f69f0799ad65280d4f']2227buildbot # [ 65.115061] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): using PTY: False2228buildbot # [ 65.135504] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command ['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): command finished with signal None, exit code 0, elapsedTime: 0.0489742229buildbot # [ 65.139973] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command 24): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1aadbd0>2230buildbot # [ 65.151676] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '--detach', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']'> rc=02231buildbot # [ 65.182723] twistd[1066]: 2026-09-06T07:08:05+0000 [-] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']'>: RemoteCommand.run [25]2232buildbot # [ 65.193494] twistd[1066]: 2026-09-06T07:08:05+0000 [-] command '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']' in dir 'build'2233buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2234buildbot # Dload Upload Total Spent Left Speed2235buildbot # [ 65.208195] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command 25): startCommand:shell2236buildbot # [ 65.209373] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): RunProcess._startCommand2237buildbot # 0 0 0 0 0 0 0 0 [ 65.216205] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): git -c user.email=buildbot@example.com -c user.name=buildbot merge --no-ff -m 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f' 259f360b80957c4514557e60c6ea20d76947650d2238buildbot # 0100 2601 100 2601 0 0 72867 0 0100 2601 100 2601 [ 65.232207] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2239buildbot # 0 0 68180 0 0100 2601 100 2601 0 0 56822[ 65.242761] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): watching logfiles {}2240buildbot # 0 02241buildbot # [ 65.252677] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): argv: [b'git', b'-c', b'user.email=buildbot@example.com', b'-c', b'user.name=buildbot', b'merge', b'--no-ff', b'-m', b'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', b'259f360b80957c4514557e60c6ea20d76947650d']2242buildbot # [ 65.259651] twistd[1067]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): using PTY: False2243buildbot # [ 65.265595] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command ['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']): command finished with signal None, exit code 0, elapsedTime: 0.0742582244buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.18 seconds)2245buildbot # [ 65.275358] twistd[1067]: 2026-09-06T07:08:05+0000 [-] (command 25): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a86490>2246buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2247buildbot # [ 65.277779] twistd[1066]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'user.email=buildbot@example.com', '-c', 'user.name=buildbot', 'merge', '--no-ff', '-m', 'Merge 259f360b80957c4514557e60c6ea20d76947650d into 85a19a95810dd141218f06f69f0799ad65280d4f', '259f360b80957c4514557e60c6ea20d76947650d']'> rc=02248buildbot # [ 65.333564] twistd[1066]: 2026-09-06T07:08:05+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey=None, sshKnownHosts=None)): []2249buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2250buildbot # Dload Upload Total Spent Left Speed2251buildbot # 0 0 0 0 0 0 0 0 0100 2601 100 2601 0 0 127.6k 0 0100 2601 100 2601 0 0 105.0k 0 [ 65.369210] twistd[1066]: 2026-09-06T07:08:06+0000 [-] step 'git' complete: success (None)2252buildbot # 0100 2601 100 2601 0 0 84308 0 02253buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.11 seconds)2254buildbot # [ 65.384839] twistd[1066]: 2026-09-06T07:08:06+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xe3e3041e4910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xe3e3041ec6e0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xe3e3041ec6e0>)])2255buildbot # [ 65.404083] twistd[1066]: 2026-09-06T07:08:06+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [26]2256buildbot # [ 65.412431] twistd[1066]: 2026-09-06T07:08:06+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'2257buildbot # [ 65.414267] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command 26): startCommand:shell2258buildbot # [ 65.415439] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand2259buildbot # [ 65.425951] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'2260buildbot # [ 65.433881] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2261buildbot # [ 65.443698] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}2262buildbot # [ 65.450405] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']2263buildbot # [ 65.458119] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False2264buildbot # [ 65.481787] twistd[1067]: 2026-09-06T07:08:06+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0693872265buildbot # [ 65.487779] twistd[1067]: 2026-09-06T07:08:06+0000 [-] (command 26): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1a86b70>2266buildbot # [ 65.493463] twistd[1066]: 2026-09-06T07:08:06+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=02267buildbot # [ 65.495948] twistd[1066]: 2026-09-06T07:08:06+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [27]2268buildbot # [ 65.501598] twistd[1066]: 2026-09-06T07:08:06+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'2269buildbot # [ 65.526088] gitea[808]: 2026/09/06 07:08:06 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/85a19a95810dd141218f06f69f0799ad65280d4f for [::1]:36750, 201 Created in 64.0ms @ repo/status.go:21(repo.NewCommitStatus)2270buildbot # [ 65.532631] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command 27): startCommand:shell2271buildbot # [ 65.536260] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand2272buildbot # [ 65.544123] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'2273buildbot # [ 65.552220] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2274buildbot # [ 65.558053] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}2275buildbot # [ 65.565911] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']2276buildbot # [ 65.575098] twistd[1067]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False2277buildbot # [ 65.669505] nix-daemon[1338]: accepted connection from pid 1774, user buildbot-worker2278buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2279buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2280buildbot # Dload Upload Total Spent Left Speed2281buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 108.1k 0 0100 1544 100 1544 0 0 83472 0 0100 1544 100 1544 0 0 68113 0 02282buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2283buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2284buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2285buildbot # Dload Upload Total Spent Left Speed2286buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 54635 0 0100 937 100 937 0 0 47009 0 0100 937 100 937 0 0 41246 0 02287buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2288buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2289buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2290buildbot # Dload Upload Total Spent Left Speed2291buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 174.9k 0 0100 2095 100 2095 0 0 143.9k 0 0100 2095 100 2095 0 0 112.4k 0 02292buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2293buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2294buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2295buildbot # Dload Upload Total Spent Left Speed2296buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 145.4k 0 0100 1735 100 1735 0 0 119.5k 0 0100 1735 100 1735 0 0 102.3k 0 02297buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2298buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2299buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2300buildbot # Dload Upload Total Spent Left Speed2301buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 146.9k 0 0100 1735 100 1735 0 0 118.4k 0 0100 1735 100 1735 0 0 101.3k 0 02302buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2303buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2304buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2305buildbot # Dload Upload Total Spent Left Speed2306buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 197.3k 0 0100 2935 100 2935 0 0 168.7k 0 0100 2935 100 2935 0 0 146.9k 0 02307buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2308buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2309buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2310buildbot # Dload Upload Total Spent Left Speed2311buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 240.6k 0 0100 2935 100 2935 0 0 198.6k 0 0100 2935 100 2935 0 0 166.9k 0 02312buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2313buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2314buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2315buildbot # Dload Upload Total Spent Left Speed2316buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 85473 0 0100 1544 100 1544 0 0 70344 0 0100 1544 100 1544 0 0 58691 0 02317buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2318buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2319buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2320buildbot # Dload Upload Total Spent Left Speed2321buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 57477 0 0100 937 100 937 0 0 48970 0 0100 937 100 937 0 0 41830 0 02322buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.08 seconds)2323buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2324buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2325buildbot # Dload Upload Total Spent Left Speed2326buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 148.4k 0 0100 2095 100 2095 0 0 125.5k 0 0100 2095 100 2095 0 0 106.0k 0 02327buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2328buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2329buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2330buildbot # Dload Upload Total Spent Left Speed2331buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 123.2k 0 0100 1735 100 1735 0 0 99.79k 0 0100 1735 100 1735 0 0 89281 0 02332buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2333buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2334buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2335buildbot # Dload Upload Total Spent Left Speed2336buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 118.2k 0 0100 1735 100 1735 0 0 100.6k 0 0100 1735 100 1735 0 0 87803 0 02337buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2338buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2339buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2340buildbot # Dload Upload Total Spent Left Speed2341buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 187.8k 0 0100 2935 100 2935 0 0 161.5k 0 0100 2935 100 2935 0 0 138.6k 0 02342buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2343buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2344buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2345buildbot # Dload Upload Total Spent Left Speed2346buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 208.3k 0 0100 2935 100 2935 0 0 170.2k 0 0100 2935 100 2935 0 0 148.8k 0 02347buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2348buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2349buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2350buildbot # Dload Upload Total Spent Left Speed2351buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 103.6k 0 0100 1544 100 1544 0 0 82615 0 0100 1544 100 1544 0 0 68747 0 02352buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)2353buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2354buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2355buildbot # Dload Upload Total Spent Left Speed2356buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 55062 0 0100 937 100 937 0 0 47057 0 0100 937 100 937 0 0 41076 0 02357buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2358buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2359buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2360buildbot # Dload Upload Total Spent Left Speed2361buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 118.2k 0 0100 2095 100 2095 0 0 103.5k 0 0100 2095 100 2095 0 0 92412 0 02362buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2363buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2364buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2365buildbot # Dload Upload Total Spent Left Speed2366buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 127.7k 0 0100 1735 100 1735 0 0 103.9k 0 0100 1735 100 1735 0 0 92850 0 02367buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2368buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2369buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2370buildbot # Dload Upload Total Spent Left Speed2371buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 128.2k 0 0100 1735 100 1735 0 0 104.2k 0 0100 1735 100 1735 0 0 93049 0 02372buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2373buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2374buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2375buildbot # Dload Upload Total Spent Left Speed2376buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 212.8k 0 0100 2935 100 2935 0 0 174.2k 0 0100 2935 100 2935 0 0 152.0k 0 02377buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2378buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2379buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2380buildbot # Dload Upload Total Spent Left Speed2381buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 182.8k 0 0100 2935 100 2935 0 0 157.9k 0 0100 2935 100 2935 0 0 137.9k 0 02382buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2383buildbot # [ 70.414594] nix-daemon[1338]: accepted connection from pid 1846, user buildbot-worker2384buildbot # [ 70.432571] nix-daemon[1338]: accepted connection from pid 1774, user buildbot-worker2385buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2386buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2387buildbot # Dload Upload Total Spent Left Speed2388buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 70666 0 0100 1544 100 1544 0 0 60185 0 0100 1544 100 1544 0 0 52468 0 02389buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2390buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2391buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2392buildbot # Dload Upload Total Spent Left Speed2393buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 55407 0 0100 937 100 937 0 0 48366 0 0100 937 100 937 0 0 42658 0 02394buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2395buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2396buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2397buildbot # Dload Upload Total Spent Left Speed2398buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 155.8k 0 0100 2095 100 2095 0 0 126.3k 0 0100 2095 100 2095 0 0 109.7k 0 02399buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2400buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2401buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2402buildbot # Dload Upload Total Spent Left Speed2403buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 128.4k 0 0100 1735 100 1735 0 0 107.9k 0 0100 1735 100 1735 0 0 93239 0 02404buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2405buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2406buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2407buildbot # Dload Upload Total Spent Left Speed2408buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 105.2k 0 0100 1735 100 1735 0 0 89933 0 0100 1735 100 1735 0 0 79895 0 02409buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2410buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2411buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2412buildbot # Dload Upload Total Spent Left Speed2413buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 224.3k 0 0100 2935 100 2935 0 0 188.0k 0 0100 2935 100 2935 0 0 159.4k 0 02414buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2415buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2416buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2417buildbot # Dload Upload Total Spent Left Speed2418buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 174.0k 0 0100 2935 100 2935 0 0 151.6k 0 0100 2935 100 2935 0 0 134.3k 0 02419buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2420buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2421buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2422buildbot # Dload Upload Total Spent Left Speed2423buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 67630 0 0100 1544 100 1544 0 0 56100 0 0100 1544 100 1544 0 0 49175 0 02424buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2425buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2426buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2427buildbot # Dload Upload Total Spent Left Speed2428buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 57287 0 0100 937 100 937 0 0 48786 0 0100 937 100 937 0 0 42413 0 02429buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2430buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2431buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2432buildbot # Dload Upload Total Spent Left Speed2433buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 165.0k 0 0100 2095 100 2095 0 0 137.6k 0 0100 2095 100 2095 0 0 117.2k 0 02434buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2435buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2436buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2437buildbot # Dload Upload Total Spent Left Speed2438buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 137.2k 0 0100 1735 100 1735 0 0 114.0k 0 0100 1735 100 1735 0 0 98.11k 0 02439buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2440buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2441buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2442buildbot # Dload Upload Total Spent Left Speed2443buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 134.8k 0 0100 1735 100 1735 0 0 112.8k 0 0100 1735 100 1735 0 0 98618 0 02444buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2445buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2446buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2447buildbot # Dload Upload Total Spent Left Speed2448buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 223.8k 0 0100 2935 100 2935 0 0 182.3k 0 0100 2935 100 2935 0 0 157.7k 0 02449buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2450buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2451buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2452buildbot # Dload Upload Total Spent Left Speed2453buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 194.7k 0 0100 2935 100 2935 0 0 167.2k 0 0100 2935 100 2935 0 0 145.8k 0 02454buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2455buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2456buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2457buildbot # Dload Upload Total Spent Left Speed2458buildbot # 0 0 0 0 0 0 0 0 0100 1544 100 1544 0 0 71924 0 0100 1544 100 1544 0 0 60260 0 0100 1544 100 1544 0 0 53107 0 02459buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2460buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2461buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2462buildbot # Dload Upload Total Spent Left Speed2463buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 64741 0 0100 937 100 937 0 0 53081 0 0100 937 100 937 0 0 46021 0 02464buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2465buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2466buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2467buildbot # Dload Upload Total Spent Left Speed2468buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 159.1k 0 0100 2095 100 2095 0 0 130.5k 0 0100 2095 100 2095 0 0 113.3k 0 02469buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.07 seconds)2470buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2471buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2472buildbot # Dload Upload Total Spent Left Speed2473buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 124.2k 0 0100 1735 100 1735 0 0 105.0k 0 0100 1735 100 1735 0 0 91634 0 02474buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)2475buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2476buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2477buildbot # Dload Upload Total Spent Left Speed2478buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 139.5k 0 0100 1735 100 1735 0 0 116.2k 0 0100 1735 100 1735 0 0 99.24k 0 02479buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2480buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2481buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2482buildbot # Dload Upload Total Spent Left Speed2483buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 230.1k 0 0100 2935 100 2935 0 0 192.3k 0 0100 2935 100 2935 0 0 164.2k 0 02484buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)2485buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2486buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2487buildbot # Dload Upload Total Spent Left Speed2488buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 180.3k 0 0100 2935 100 2935 0 0 156.4k 0 0100 2935 100 2935 0 0 136.3k 0 02489buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.07 seconds)2490buildbot # [ 74.963589] twistd[1067]: 2026-09-06T07:08:15+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 9.4304022491buildbot # [ 74.991087] twistd[1067]: 2026-09-06T07:08:15+0000 [-] (command 27): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd2116570>2492buildbot # [ 74.997768] twistd[1066]: 2026-09-06T07:08:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=02493buildbot # [ 75.057119] twistd[1066]: 2026-09-06T07:08:15+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xe3e3041e4910>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xe3e3041ec6e0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xe3e3041ec6e0>)]2494buildbot # [ 75.087784] twistd[1066]: 2026-09-06T07:08:15+0000 [-] step 'Evaluate flake' complete: success (None)2495buildbot # [ 75.144592] twistd[1066]: 2026-09-06T07:08:15+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, trigger_config=TriggerConfig(builds_scheduler='gitea-admin-test-flake-nix-build', failed_eval_scheduler='gitea-admin-test-flake-nix-failed-eval', dependency_failed_scheduler='gitea-admin-test-flake-nix-dependency-failed', cached_failure_scheduler='gitea-admin-test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []2496buildbot # [ 75.163636] twistd[1066]: 2026-09-06T07:08:15+0000 [-] step 'build flake' complete: success (None)2497buildbot # [ 75.182551] twistd[1066]: 2026-09-06T07:08:15+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3042162a0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e304216350>)): []2498buildbot # [ 75.194493] gitea[808]: 2026/09/06 07:08:15 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/85a19a95810dd141218f06f69f0799ad65280d4f for [::1]:36750, 201 Created in 89.2ms @ repo/status.go:21(repo.NewCommitStatus)2499buildbot # [ 75.204504] twistd[1066]: 2026-09-06T07:08:15+0000 [-] step 'Process skipped builds' complete: skipped (None)2500buildbot # [ 75.229992] twistd[1066]: 2026-09-06T07:08:15+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [28]2501buildbot # [ 75.244099] twistd[1066]: 2026-09-06T07:08:15+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']' in dir 'build'2502buildbot # [ 75.246295] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command 28): startCommand:shell2503buildbot # [ 75.247465] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): RunProcess._startCommand2504buildbot # [ 75.251848] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/2505buildbot # [ 75.255773] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2506buildbot # [ 75.259382] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): watching logfiles {}2507buildbot # [ 75.264557] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']2508buildbot # [ 75.268835] twistd[1067]: 2026-09-06T07:08:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): using PTY: False2509buildbot # [ 75.278442] twistd[1067]: 2026-09-06T07:08:15+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0421902510buildbot # [ 75.281539] twistd[1067]: 2026-09-06T07:08:15+0000 [-] (command 28): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae4250>2511buildbot # [ 75.292927] twistd[1066]: 2026-09-06T07:08:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/gitea-admin/test-flake/drvs/local-worker-000/']'> rc=02512buildbot # [ 75.325519] gitea[808]: 2026/09/06 07:08:15 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/85a19a95810dd141218f06f69f0799ad65280d4f for [::1]:36750, 201 Created in 98.5ms @ repo/status.go:21(repo.NewCommitStatus)2513buildbot # [ 75.338095] twistd[1066]: 2026-09-06T07:08:16+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []2514buildbot # [ 75.354438] twistd[1066]: 2026-09-06T07:08:16+0000 [-] step 'Cleanup drv paths' complete: success (None)2515buildbot # [ 75.379841] twistd[1066]: 2026-09-06T07:08:16+0000 [-] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'>: RemoteCommand.run [29]2516buildbot # [ 75.381979] twistd[1066]: 2026-09-06T07:08:16+0000 [-] command '['git', 'show', 'origin/master:buildbot-nix.toml']' in dir 'build'2517buildbot # [ 75.383516] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command 29): startCommand:shell2518buildbot # [ 75.390911] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): RunProcess._startCommand2519buildbot # [ 75.392834] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): git show origin/master:buildbot-nix.toml2520buildbot # [ 75.397916] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2521buildbot # [ 75.400837] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): watching logfiles {}2522buildbot # [ 75.405286] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): argv: [b'git', b'show', b'origin/master:buildbot-nix.toml']2523buildbot # [ 75.408958] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): using PTY: False2524buildbot # [ 75.421504] twistd[1067]: 2026-09-06T07:08:16+0000 [-] (command ['git', 'show', 'origin/master:buildbot-nix.toml']): command finished with signal None, exit code 0, elapsedTime: 0.0420972525buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2526buildbot # [ 75.423662] twistd[1067]: 2026-09-06T07:08:16+0000 [-] (command 29): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae4650>2527buildbot # [ 75.441782] twistd[1066]: 2026-09-06T07:08:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'show', 'origin/master:buildbot-nix.toml']'> rc=02528buildbot # [ 75.455454] twistd[1066]: 2026-09-06T07:08:16+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'>: RemoteCommand.run [30]2529buildbot # [ 75.459539] twistd[1066]: 2026-09-06T07:08:16+0000 [-] command '['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']' in dir 'build'2530buildbot # [ 75.470694] gitea[808]: 2026/09/06 07:08:16 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/85a19a95810dd141218f06f69f0799ad65280d4f for [::1]:36750, 201 Created in 103.3ms @ repo/status.go:21(repo.NewCommitStatus)2531buildbot # [ 75.493314] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command 30): startCommand:shell2532buildbot # [ 75.498151] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): RunProcess._startCommand2533buildbot # [ 75.504211] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): buildbot-effects list --rev 85a19a95810dd141218f06f69f0799ad65280d4f --branch test-pr-effects --repo gitea-admin/test-flake2534buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2535buildbot # Dload [ 75.516225] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_nix-eval/build (timeout 1200 secs)2536buildbot # [ 75.519802] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): watching logfiles {}2537buildbot # Upload Total Spent Left Speed2538buildbot # 0 0 0 0 0 0 0 0 [ 75.531409] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'85a19a95810dd141218f06f69f0799ad65280d4f', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake']2539buildbot # 0[ 75.540408] twistd[1067]: 2026-09-06T07:08:16+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): using PTY: False2540buildbot # 100 1544 100 1544 0 0 41969 0 0100 1544 100 1544 0 0 39301 0 0100 1544 100 1544 0 0 36124 0 02541buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)2542buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2543buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2544buildbot # Dload Upload Total Spent Left Speed2545buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 41841 0 0100 937 100 937 0 0 35919 0 0100 937 100 937 0 0 32774 0 02546buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.09 seconds)2547buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2548buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2549buildbot # Dload Upload Total Spent Left Speed2550buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 92433 0 0100 2095 100 2095 0 0 76742 0 0100 2095 100 2095 0 0 64106 0 02551buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.09 seconds)2552buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2553buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2554buildbot # Dload Upload Total Spent Left Speed2555buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 71546 0 0100 1735 100 1735 0 0 64100 0 0100 1735 100 1735 0 0 47268 0 02556buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.11 seconds)2557buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2558buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2559buildbot # Dload Upload Total Spent Left Speed2560buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 72045 0 0100 1735 100 1735 0 0 56743 0 0100 1735 100 1735 0 0 52551 0 02561buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.09 seconds)2562buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2563buildbot # [ 76.004411] nix-daemon[1338]: accepted connection from pid 1947, user buildbot-worker2564buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2565buildbot # Dload Upload Total Spent Left Speed2566buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 127.0k 0 0100 2935 100 2935 0 0 114.6k 0 0100 2935 100 2935 0 0 93304 0 02567buildbot # [ 76.072167] twistd[1067]: 2026-09-06T07:08:16+0000 [-] (command ['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5726892568buildbot # [ 76.075307] twistd[1067]: 2026-09-06T07:08:16+0000 [-] (command 30): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae4550>2569buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.12 seconds)2570buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2571buildbot # [ 76.086061] twistd[1066]: 2026-09-06T07:08:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake']'> rc=02572buildbot # [ 76.141341] twistd[1066]: 2026-09-06T07:08:16+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3041da610>, logEnviron=False)): []2573buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2574buildbot # [ 76.159186] twistd[1066]: 2026-09-06T07:08:16+0000 [-] step 'Evaluate effects' complete: success (None)2575buildbot # Dload Upload Total Spent Left Speed2576buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 146.3k 0 0100 2935 100 2935 0 0 130.0k 0 0100 2935 100 2935 0 0 112.1k 0 02577buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.11 seconds)2578buildbot # [ 76.219965] twistd[1066]: 2026-09-06T07:08:16+0000 [-] added buildset 5 to database2579buildbot # [ 76.266340] gitea[808]: 2026/09/06 07:08:16 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/85a19a95810dd141218f06f69f0799ad65280d4f for [::1]:36750, 201 Created in 41.5ms @ repo/status.go:21(repo.NewCommitStatus)2580buildbot # [ 76.359591] twistd[1066]: 2026-09-06T07:08:17+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:None results:success> using worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=AVAILABLE>2581buildbot # [ 76.369783] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <Build gitea-admin/test-flake/run-effect number:None results:success>.startBuild2582buildbot # [ 76.436256] twistd[1066]: 2026-09-06T07:08:17+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])2583buildbot # [ 76.441355] twistd[1066]: 2026-09-06T07:08:17+0000 [-] starting build <Build gitea-admin/test-flake/run-effect number:2 results:success>.. pinging the worker <WorkerForBuilder builder='gitea-admin/test-flake/run-effect' worker='local-worker-000' state=BUILDING>2584buildbot # [ 76.445565] twistd[1066]: 2026-09-06T07:08:17+0000 [-] sending ping2585buildbot # [ 76.448463] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] message from master: ping2586buildbot # [ 76.449617] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] ping finished: success2587buildbot # [ 76.472133] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [31]2588buildbot # [ 76.473626] twistd[1066]: 2026-09-06T07:08:17+0000 [-] command '['git', '--version']' in dir 'build'2589buildbot # [ 76.474824] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 31): startCommand:shell2590buildbot # [ 76.475996] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand2591buildbot # [ 76.481496] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): git --version2592buildbot # [ 76.482805] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2593buildbot # [ 76.487431] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}2594buildbot # [ 76.489493] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']2595buildbot # [ 76.493245] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): environment:2596buildbot # [ 76.494583] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2597buildbot # [ 76.495547] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2598buildbot # [ 76.496954] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2599buildbot # [ 76.497843] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2600buildbot # [ 76.499112] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2601buildbot # [ 76.500701] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2602buildbot # [ 76.501979] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2603buildbot # [ 76.502812] twistd[1067]: 'LANG': 'en_US.UTF-8',2604buildbot # [ 76.503573] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2605buildbot # [ 76.505719] twistd[1067]: 'LOGNAME': 'buildbot-worker',2606buildbot # [ 76.506545] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2607buildbot # [ 76.507769] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2608buildbot # [ 76.509685] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2609buildbot # [ 76.510777] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2610buildbot # [ 76.535173] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2611buildbot # [ 76.537788] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2612buildbot # [ 76.538584] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2613buildbot # [ 76.540342] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2614buildbot # [ 76.541285] twistd[1067]: 'SHLVL': '0',2615buildbot # [ 76.541915] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2616buildbot # [ 76.542684] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2617buildbot # [ 76.543967] twistd[1067]: 'USER': 'buildbot-worker',2618buildbot # [ 76.549936] twistd[1067]: 'WORKER_COUNT': '0',2619buildbot # [ 76.550658] twistd[1067]: 'WORKER_NAME': 'local-worker',2620buildbot # [ 76.551397] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2621buildbot # [ 76.553073] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', '--version']): using PTY: False2622buildbot # [ 76.554635] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0750822623buildbot # [ 76.557863] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command 31): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae4c50>2624buildbot # [ 76.561898] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=02625buildbot # [ 76.576877] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteCommand 'stat' at 250564165546256>: RemoteCommand.run [32]2626buildbot # [ 76.589168] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 32): startCommand:stat2627buildbot # [ 76.590427] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 32): StatFile /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build/.buildbot-patched'2628buildbot # [ 76.597097] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 32): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xfd7dd208ad70>2629buildbot # [ 76.600627] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 250564165546256> rc=22630buildbot # [ 76.608060] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteCommand 'listdir' at 250564165544336>: RemoteCommand.run [33]2631buildbot # [ 76.637299] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 33): startCommand:listdir2632buildbot # [ 76.639080] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 33): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xfd7dd21187d0>2633buildbot # [ 76.645225] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 250564165544336> rc=02634buildbot # [ 76.649453] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteShellCommand '['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']'>: RemoteCommand.run [34]2635buildbot # [ 76.653498] twistd[1066]: 2026-09-06T07:08:17+0000 [-] command '['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']' in dir 'build'2636buildbot # [ 76.685486] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 34): startCommand:shell2637buildbot # [ 76.691338] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): RunProcess._startCommand2638buildbot # [ 76.696174] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): git cat-file -e 85a19a95810dd141218f06f69f0799ad65280d4f2639buildbot # [ 76.699263] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2640buildbot # [ 76.708143] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): watching logfiles {}2641buildbot # [ 76.710953] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): argv: [b'git', b'cat-file', b'-e', b'85a19a95810dd141218f06f69f0799ad65280d4f']2642buildbot # [ 76.717320] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): environment:2643buildbot # [ 76.719761] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2644buildbot # [ 76.721321] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2645buildbot # [ 76.722916] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2646buildbot # [ 76.724517] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2647buildbot # [ 76.725919] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2648buildbot # [ 76.728070] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2649buildbot # [ 76.729616] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2650buildbot # [ 76.731035] twistd[1067]: 'LANG': 'en_US.UTF-8',2651buildbot # [ 76.732077] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2652buildbot # [ 76.734682] twistd[1067]: 'LOGNAME': 'buildbot-worker',2653buildbot # [ 76.735829] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2654buildbot # [ 76.737474] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2655buildbot # [ 76.740523] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2656buildbot # [ 76.742775] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2657buildbot # [ 76.771724] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2658buildbot # [ 76.773361] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2659buildbot # [ 76.774143] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2660buildbot # [ 76.775846] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2661buildbot # [ 76.776976] twistd[1067]: 'SHLVL': '0',2662buildbot # [ 76.777643] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2663buildbot # [ 76.778455] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2664buildbot # [ 76.779817] twistd[1067]: 'USER': 'buildbot-worker',2665buildbot # [ 76.786002] twistd[1067]: 'WORKER_COUNT': '0',2666buildbot # [ 76.788108] twistd[1067]: 'WORKER_NAME': 'local-worker',2667buildbot # [ 76.789983] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2668buildbot # [ 76.791440] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): using PTY: False2669buildbot # [ 76.795914] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command ['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']): command finished with signal None, exit code 1, elapsedTime: 0.0912572670buildbot # [ 76.799675] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command 34): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae5250>2671buildbot # [ 76.802128] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'cat-file', '-e', '85a19a95810dd141218f06f69f0799ad65280d4f']'> rc=12672buildbot # [ 76.810317] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'>: RemoteCommand.run [35]2673buildbot # [ 76.814292] twistd[1066]: 2026-09-06T07:08:17+0000 [-] command '['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']' in dir 'build'2674buildbot # [ 76.824999] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 35): startCommand:shell2675buildbot # [ 76.828985] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): RunProcess._startCommand2676buildbot # [ 76.831748] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): git fetch -f --progress http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake test-pr-effects2677buildbot # [ 76.841385] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2678buildbot # [ 76.845539] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): watching logfiles {}2679buildbot # [ 76.850672] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): argv: [b'git', b'fetch', b'-f', b'--progress', b'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', b'test-pr-effects']2680buildbot # [ 76.855141] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): environment:2681buildbot # [ 76.858451] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2682buildbot # [ 76.859770] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2683buildbot # [ 76.861205] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2684buildbot # [ 76.862292] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2685buildbot # [ 76.863364] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2686buildbot # [ 76.864923] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2687buildbot # [ 76.866119] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2688buildbot # [ 76.866933] twistd[1067]: 'LANG': 'en_US.UTF-8',2689buildbot # [ 76.867902] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2690buildbot # [ 76.870483] twistd[1067]: 'LOGNAME': 'buildbot-worker',2691buildbot # [ 76.871307] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2692buildbot # [ 76.873054] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2693buildbot # [ 76.874697] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2694buildbot # [ 76.876655] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2695buildbot # [ 76.900477] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2696buildbot # [ 76.902404] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2697buildbot # [ 76.903433] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2698buildbot # [ 76.905259] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2699buildbot # [ 76.906434] twistd[1067]: 'SHLVL': '0',2700buildbot # [ 76.907096] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2701buildbot # [ 76.907900] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2702buildbot # [ 76.909538] twistd[1067]: 'USER': 'buildbot-worker',2703buildbot # [ 76.910352] twistd[1067]: 'WORKER_COUNT': '0',2704buildbot # [ 76.911084] twistd[1067]: 'WORKER_NAME': 'local-worker',2705buildbot # [ 76.912191] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2706buildbot # [ 76.913636] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): using PTY: False2707buildbot # [ 76.951452] gitea[808]: 2026/09/06 07:08:17 HTTPRequest [I] router: completed GET /gitea-admin/test-flake/info/refs?service=git-upload-pack for [::1]:60964, 200 OK in 7.5ms @ repo/githttp.go:455(repo.GetInfoRefs)2708buildbot # [ 76.963021] gitea[808]: 2026/09/06 07:08:17 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:60964, 200 OK in 8.0ms @ repo/githttp.go:433(repo.ServiceUploadPack)2709buildbot # [ 76.983433] gitea[808]: 2026/09/06 07:08:17 HTTPRequest [I] router: completed POST /gitea-admin/test-flake/git-upload-pack for [::1]:60964, 200 OK in 15.9ms @ repo/githttp.go:433(repo.ServiceUploadPack)2710buildbot # [ 77.014440] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command ['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.1846382711buildbot # [ 77.021679] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command 35): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae5550>2712buildbot # [ 77.024814] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'fetch', '-f', '--progress', 'http://git:e3e2b0593fd50ebb323073f2eb0936c7ef95f5cc@localhost:3742/gitea-admin/test-flake', 'test-pr-effects']'> rc=02713buildbot # [ 77.045346] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteShellCommand '['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']'>: RemoteCommand.run [36]2714buildbot # [ 77.047329] twistd[1066]: 2026-09-06T07:08:17+0000 [-] command '['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']' in dir 'build'2715buildbot # [ 77.060991] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 36): startCommand:shell2716buildbot # [ 77.065327] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): RunProcess._startCommand2717buildbot # [ 77.067332] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): git checkout -f 85a19a95810dd141218f06f69f0799ad65280d4f2718buildbot # [ 77.074332] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2719buildbot # [ 77.078477] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): watching logfiles {}2720buildbot # [ 77.080714] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): argv: [b'git', b'checkout', b'-f', b'85a19a95810dd141218f06f69f0799ad65280d4f']2721buildbot # [ 77.083451] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): environment:2722buildbot # [ 77.085563] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2723buildbot # [ 77.088596] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2724buildbot # [ 77.089762] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2725buildbot # [ 77.090550] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2726buildbot # [ 77.091512] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2727buildbot # [ 77.093122] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2728buildbot # [ 77.094192] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2729buildbot # [ 77.095230] twistd[1067]: 'LANG': 'en_US.UTF-8',2730buildbot # [ 77.096070] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2731buildbot # [ 77.098034] twistd[1067]: 'LOGNAME': 'buildbot-worker',2732buildbot # [ 77.098865] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2733buildbot # [ 77.099863] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2734buildbot # [ 77.101644] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2735buildbot # [ 77.102809] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2736buildbot # [ 77.126920] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2737buildbot # [ 77.128710] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2738buildbot # [ 77.130237] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2739buildbot # [ 77.131940] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2740buildbot # [ 77.134541] twistd[1067]: 'SHLVL': '0',2741buildbot # [ 77.135373] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2742buildbot # [ 77.137729] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2743buildbot # [ 77.139175] twistd[1067]: 'USER': 'buildbot-worker',2744buildbot # [ 77.140038] twistd[1067]: 'WORKER_COUNT': '0',2745buildbot # [ 77.140983] twistd[1067]: 'WORKER_NAME': 'local-worker',2746buildbot # [ 77.142080] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2747buildbot # [ 77.143522] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): using PTY: False2748buildbot # [ 77.151227] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command ['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']): command finished with signal None, exit code 0, elapsedTime: 0.0851932749buildbot # [ 77.155985] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command 36): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae5850>2750buildbot # [ 77.158627] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-f', '85a19a95810dd141218f06f69f0799ad65280d4f']'> rc=02751buildbot # [ 77.177685] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'>: RemoteCommand.run [37]2752buildbot # [ 77.179386] twistd[1066]: 2026-09-06T07:08:17+0000 [-] command '['git', 'checkout', '-B', 'test-pr-effects']' in dir 'build'2753buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2754buildbot # [ 77.192913] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 37): startCommand:shell2755buildbot # [ 77.196684] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): RunProcess._startCommand2756buildbot # [ 77.198276] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): git checkout -B test-pr-effects2757buildbot # [ 77.203507] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2758buildbot # [ 77.207362] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): watching logfiles {}2759buildbot # [ 77.209437] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): argv: [b'git', b'checkout', b'-B', b'test-pr-effects']2760buildbot # [ 77.211575] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): environment:2761buildbot # [ 77.216989] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2762buildbot # [ 77.218376] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2763buildbot # [ 77.219939] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2764buildbot # [ 77.221240] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2765buildbot # [ 77.222644] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2766buildbot # [ 77.225394] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2767buildbot # [ 77.227053] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2768buildbot # [ 77.228297] twistd[1067]: 'LANG': 'en_US.UTF-8',2769buildbot # [ 77.229418] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2770buildbot # [ 77.231839] twistd[1067]: 'LOGNAME': 'buildbot-worker',2771buildbot # [ 77.234285] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2772buildbot # [ 77.236784] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2773buildbot # [ 77.239954] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2774buildbot # [ 77.243626] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2775buildbot # [ 77.270118] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2776buildbot # [ 77.274903] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2777buildbot # [ 77.275780] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2778buildbot # [ 77.277781] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2779buildbot # [ 77.286906] twistd[1067]: 'SHLVL': '0',2780buildbot # [ 77.287671] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2781buildbot # [ 77.290738] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2782buildbot # [ 77.296478] twistd[1067]: 'USER': 'buildbot-worker',2783buildbot # [ 77.299133] twistd[1067]: 'WORKER_COUNT': '0',2784buildbot # [ 77.301471] twistd[1067]: 'WORKER_NAME': 'local-worker',2785buildbot # [ 77.306904] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2786buildbot # [ 77.310104] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'checkout', '-B', 'test-pr-effects']): using PTY: False2787buildbot # [ 77.312822] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command ['git', 'checkout', '-B', 'test-pr-effects']): command finished with signal None, exit code 0, elapsedTime: 0.0835952788buildbot # [ 77.319406] twistd[1067]: 2026-09-06T07:08:17+0000 [-] (command 37): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae5c50>2789buildbot # [ 77.326281] twistd[1066]: 2026-09-06T07:08:17+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'checkout', '-B', 'test-pr-effects']'> rc=02790buildbot # [ 77.331983] twistd[1066]: 2026-09-06T07:08:17+0000 [-] <RemoteShellCommand '['git', 'submodule', 'sync']'>: RemoteCommand.run [38]2791buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2792buildbot # [ 77.342823] twistd[1066]: 2026-09-06T07:08:17+0000 [-] command '['git', 'submodule', 'sync']' in dir 'build'2793buildbot # [ 77.344625] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command 38): startCommand:shell2794buildbot # [ 77.345806] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'submodule', 'sync']): RunProcess._startCommand2795buildbot # [ 77.347292] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'submodule', 'sync']): git submodule sync2796buildbot # Dload Upload Total Spent Left Speed2797buildbot # 0 0 0 0 0 0 0 0 0[ 77.358599] twistd[1067]: 2026-09-06T07:08:17+0000 [Broker,client] (command ['git', 'submodule', 'sync']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2798buildbot # [ 77.363805] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'sync']): watching logfiles {}2799buildbot # 100 1894 100 1894 0 0 51347 0 0100 1894 100 1894 0 0 48080 0[ 77.372127] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'sync']): argv: [b'git', b'submodule', b'sync']2800buildbot # [ 77.373788] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'sync']): environment:2801buildbot # [ 77.375173] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2802buildbot # [ 77.378972] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2803buildbot # 0100 1894 100 1894 0 0 37973 0 02804buildbot # [ 77.384230] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2805buildbot # [ 77.387302] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2806buildbot # [ 77.389162] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2807buildbot # [ 77.391105] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2808buildbot # [ 77.392767] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2809buildbot # [ 77.394712] twistd[1067]: 'LANG': 'en_US.UTF-8',2810buildbot # [ 77.395727] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2811buildbot # [ 77.397836] twistd[1067]: 'LOGNAME': 'buildbot-worker',2812buildbot # [ 77.398695] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2813buildbot # [ 77.399807] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2814buildbot # [ 77.402500] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2815buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.22 seconds)2816buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2817buildbot # [ 77.404429] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2818buildbot # [ 77.429188] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2819buildbot # [ 77.431906] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2820buildbot # [ 77.433229] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2821buildbot # [ 77.435748] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2822buildbot # [ 77.437683] twistd[1067]: 'SHLVL': '0',2823buildbot # [ 77.439216] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2824buildbot # [ 77.441369] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2825buildbot # [ 77.443316] twistd[1067]: 'USER': 'buildbot-worker',2826buildbot # [ 77.446406] twistd[1067]: 'WORKER_COUNT': '0',2827buildbot # [ 77.448685] twistd[1067]: 'WORKER_NAME': 'local-worker',2828buildbot # [ 77.450596] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2829buildbot # [ 77.454420] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'sync']): using PTY: False2830buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2831buildbot # Dload Upload Total Spent Left Speed2832buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 43591 0 0100 937 100 937 0 0 34713 0 0100 937 100 937 0 0 31187 0 02833buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.13 seconds)2834buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2835buildbot # [ 77.585806] twistd[1067]: 2026-09-06T07:08:18+0000 [-] (command ['git', 'submodule', 'sync']): command finished with signal None, exit code 0, elapsedTime: 0.2438822836buildbot # [ 77.596362] twistd[1067]: 2026-09-06T07:08:18+0000 [-] (command 38): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae48d0>2837buildbot # [ 77.598562] twistd[1066]: 2026-09-06T07:08:18+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'sync']'> rc=02838buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2839buildbot # Dload Upload Total Spent Left Speed2840buildbot # 0 0 0 0 0 0 0 0 0[ 77.624791] twistd[1066]: 2026-09-06T07:08:18+0000 [-] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'>: RemoteCommand.run [39]2841buildbot # [ 77.626911] twistd[1066]: 2026-09-06T07:08:18+0000 [-] command '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']' in dir 'build'2842buildbot # 100 2095 100 2095 0 0 87266 0 0100 2095 100 2095 0 0 79002 0 [ 77.639544] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command 39): startCommand:shell2843buildbot # [ 77.640843] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): RunProcess._startCommand2844buildbot # [ 77.642860] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): git submodule update --init --recursive --force --checkout2845buildbot # 0100 2095 100 2095 0 0 49754 0 [ 77.653744] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2846buildbot # 02847buildbot # [ 77.659493] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): watching logfiles {}2848buildbot # [ 77.664795] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): argv: [b'git', b'submodule', b'update', b'--init', b'--recursive', b'--force', b'--checkout']2849buildbot # [ 77.668637] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): environment:2850buildbot # [ 77.670782] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2851buildbot # [ 77.672142] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2852buildbot # [ 77.673478] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2853buildbot # [ 77.674376] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2854buildbot # [ 77.675730] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2855buildbot # [ 77.677575] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2856buildbot # [ 77.679374] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2857buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.14 seconds)2858buildbot # [ 77.681420] twistd[1067]: 'LANG': 'en_US.UTF-8',2859buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2860buildbot # [ 77.682156] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2861buildbot # [ 77.683694] twistd[1067]: 'LOGNAME': 'buildbot-worker',2862buildbot # [ 77.686395] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2863buildbot # [ 77.687790] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2864buildbot # [ 77.690272] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2865buildbot # [ 77.691717] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2866buildbot # [ 77.717245] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2867buildbot # [ 77.719051] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2868buildbot # [ 77.720645] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2869buildbot # [ 77.722569] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2870buildbot # [ 77.724578] twistd[1067]: 'SHLVL': '0',2871buildbot # [ 77.726190] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2872buildbot # [ 77.728402] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2873buildbot # [ 77.731404] twistd[1067]: 'USER': 'buildbot-worker',2874buildbot # [ 77.733941] twistd[1067]: 'WORKER_COUNT': '0',2875buildbot # [ 77.735303] twistd[1067]: 'WORKER_NAME': 'local-worker',2876buildbot # [ 77.740867] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2877buildbot # [ 77.742220] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): using PTY: False2878buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2879buildbot # Dload Upload Total Spent Left Speed2880buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 78906 0 0100 1735 100 1735 0 0 70946 0 0100 1735 100 1735 0 0 54908 0 02881buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.14 seconds)2882buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2883buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2884buildbot # Dload Upload Total Spent Left Speed2885buildbot # 0 0 0 0 0 [ 77.886343] twistd[1067]: 2026-09-06T07:08:18+0000 [-] (command ['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']): command finished with signal None, exit code 0, elapsedTime: 0.2462642886buildbot # 0 0 0 0[ 77.892965] twistd[1067]: 2026-09-06T07:08:18+0000 [-] (command 39): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae54d0>2887buildbot # [ 77.899491] twistd[1066]: 2026-09-06T07:08:18+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'submodule', 'update', '--init', '--recursive', '--force', '--checkout']'> rc=02888buildbot # 100 1735 100 1735 0 0 63630 0 0100 1735 100 1735 0 0 55868 0 0100 1735 100 1735 0 0 48146 0 02889buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.10 seconds)2890buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2891buildbot # [ 77.924936] twistd[1066]: 2026-09-06T07:08:18+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [40]2892buildbot # [ 77.928687] twistd[1066]: 2026-09-06T07:08:18+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'2893buildbot # [ 77.935476] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command 40): startCommand:shell2894buildbot # [ 77.936848] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand2895buildbot # [ 77.941738] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD2896buildbot # [ 77.943243] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2897buildbot # [ 77.950456] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}2898buildbot # [ 77.955776] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']2899buildbot # [ 77.958266] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): environment:2900buildbot # [ 77.960097] twistd[1067]: {'BUILDBOT_DIR': '/var/lib/buildbot-worker/worker',2901buildbot # [ 77.961661] twistd[1067]: 'CREDENTIALS_DIRECTORY': '/run/credentials/buildbot-worker.service',2902buildbot # [ 77.965420] twistd[1067]: 'HOME': '/var/lib/buildbot-worker',2903buildbot # [ 77.968972] twistd[1067]: 'INVOCATION_ID': '692136cee91849559aa041ec57b7459c',2904buildbot # [ 77.970103] twistd[1067]: 'IO_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/io.pressure',2905buildbot # [ 77.972155] twistd[1067]: 'IO_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2906buildbot # [ 77.973459] twistd[1067]: 'JOURNAL_STREAM': '9:12698',2907buildbot # [ 77.975657] twistd[1067]: 'LANG': 'en_US.UTF-8',2908buildbot # [ 77.976746] twistd[1067]: 'LOCALE_ARCHIVE': '/nix/store/5nlj3av3zm73g4hcxpnf4fwij223mwb4-glibc-locales-2.42-84/lib/locale/locale-archive',2909buildbot # [ 77.978459] twistd[1067]: 'LOGNAME': 'buildbot-worker',2910buildbot # [ 77.979574] twistd[1067]: 'MASTER_URL': 'tcp:host=localhost:port=9989',2911buildbot # [ 77.980982] twistd[1067]: 'MEMORY_PRESSURE_WATCH': '/sys/fs/cgroup/system.slice/buildbot-worker.service/memory.pressure',2912buildbot # [ 77.982630] twistd[1067]: 'MEMORY_PRESSURE_WRITE': 'c29tZSAyMDAwMDAgMjAwMDAwMAA=',2913buildbot # [ 77.983969] twistd[1067]: 'PATH': '/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin:/nix/store/gildxi6l0nvrryv81y7xqpld4iwjviqz-python3.14-twisted-26.4.0/bin:/nix/store/dyis06kvhz9yvn77addh4v6v0c37zdhf-python3.14-automat-25.4.16/bin:/nix/store/5qdrrghvc7vq165d8wnmlxf7xa93vynv-python3.14-idna-3.18/bin:/nix/store/ydrrdbxpi8mq8mdx0a78212qzhsz48q8-python3.14-incremental-24.11.0/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/bin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/bin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/bin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/bin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/bin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/bin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/bin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/bin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/bin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/bin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/bin:/nix/store/z8y4hrfv46xc22k2vajqp8zflka1dj1y-cachix-1.12.1-bin/sbin:/nix/store/clxhwm4v3gl0k3hazm0zpx14gz2w0clz-git-2.55.0/sbin:/nix/store/6dibrdp9lf2p8ap2bf02kywgljh51qca-openssh-10.5p1/sbin:/nix/store/gjb6szzx4bl00zd1cnvadhhycpjrnb38-nix-2.34.8/sbin:/nix/store/2v6yfrj5kcq2f5vqw63cr6c3d6i898qc-bash-interactive-5.3p15/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/5830ppm3msl9h8gsb7ml1057zmqvbd7z-nix-eval-jobs-2.35.2/sbin:/nix/store/nvv3sfxwg56jfm3dx57s949aw5yq5ljj-buildbot-effects/sbin:/nix/store/85k56vdxxb75xmgvxj4zhaawyafkchwh-coreutils-9.11/sbin:/nix/store/jz7krjna0192djzg5ac86pj1l2d38ifv-findutils-4.11.0/sbin:/nix/store/hzxxkxr2lmlphhybvmwc7v2gcs5cpvgf-gnugrep-3.12/sbin:/nix/store/7p72znx78xpz8lz3rkb6f8ham7pz37qh-gnused-4.10/sbin:/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/sbin',2914buildbot # [ 78.014143] twistd[1067]: 'PWD': '/var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build',2915buildbot # [ 78.017587] twistd[1067]: 'PYTHONNOUSERSITE': 'true',2916buildbot # [ 78.018643] twistd[1067]: 'PYTHONPATH': '/nix/store/gy3a7i86ahrfxikf5ggxwgcnfas14f4s-python3-3.14.7-env/lib/python3.14/site-packages',2917buildbot # [ 78.022329] twistd[1067]: 'SHELL': '/run/current-system/sw/bin/bash',2918buildbot # [ 78.023236] twistd[1067]: 'SHLVL': '0',2919buildbot # [ 78.023814] twistd[1067]: 'SYSTEMD_EXEC_PID': '1067',2920buildbot # [ 78.027916] twistd[1067]: 'TZDIR': '/nix/store/9870dnbzywsgdi86yg1bc70aqwkqhxyp-tzdata-2026c/share/zoneinfo',2921buildbot # [ 78.030567] twistd[1067]: 'USER': 'buildbot-worker',2922buildbot # [ 78.031429] twistd[1067]: 'WORKER_COUNT': '0',2923buildbot # [ 78.033294] twistd[1067]: 'WORKER_NAME': 'local-worker',2924buildbot # [ 78.036814] twistd[1067]: 'WORKER_PASSWORD_FILE': '/run/credentials/buildbot-worker.service/worker-password-file'}2925buildbot # [ 78.039797] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False2926buildbot # [ 78.043381] twistd[1067]: 2026-09-06T07:08:18+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0404242927buildbot # [ 78.046844] twistd[1067]: 2026-09-06T07:08:18+0000 [-] (command 40): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae6050>2928buildbot # [ 78.052710] twistd[1066]: 2026-09-06T07:08:18+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=02929buildbot # % Total % Received % Xferd Average Speed Time Time Tim[ 78.068524] twistd[1066]: 2026-09-06T07:08:18+0000 [-] Got Git revision 85a19a95810dd141218f06f69f0799ad65280d4f2930buildbot # e Current2931buildbot # Dload Upload Total Spent Left Speed2932buildbot # 0 0 0 0 0 0 0 0 0[ 78.084051] twistd[1066]: 2026-09-06T07:08:18+0000 [-] releaseLocks(GitLocalPrMerge(repourl=Interpolate('http://git:%(secret:gitea-token)s@localhost:3742/gitea-admin/test-flake'), method='clean', submodules=True, haltOnFailure=True, sshPrivateKey=None, sshKnownHosts=None)): []2933buildbot # 100 2935 100 2935 0 0 110.9k 0 0100 2935 100 2935 0 0 97582 0 0100 2935 100 2935 0 0 76539 0 02934buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.19 seconds)2935buildbot # [ 78.114418] twistd[1066]: 2026-09-06T07:08:18+0000 [-] step 'git' complete: success (None)2936buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2937buildbot # [ 78.137751] twistd[1066]: 2026-09-06T07:08:18+0000 [-] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'>: RemoteCommand.run [41]2938buildbot # [ 78.144977] twistd[1066]: 2026-09-06T07:08:18+0000 [-] command '['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']' in dir 'build'2939buildbot # [ 78.152939] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command 41): startCommand:shell2940buildbot # [ 78.155931] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): RunProcess._startCommand2941buildbot # [ 78.159370] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): buildbot-effects run --rev 85a19a95810dd141218f06f69f0799ad65280d4f --branch test-pr-effects --repo gitea-admin/test-flake test-effect2942buildbot # [ 78.164334] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): in dir /var/lib/buildbot-worker/worker-000/gitea-admin_test-flake_run-effect/build (timeout 1200 secs)2943buildbot # [ 78.168519] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): watching logfiles {}2944buildbot # [ 78.173863] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): argv: [b'buildbot-effects', b'run', b'--rev', b'85a19a95810dd141218f06f69f0799ad65280d4f', b'--branch', b'test-pr-effects', b'--repo', b'gitea-admin/test-flake', b'test-effect']2945buildbot # [ 78.180285] twistd[1067]: 2026-09-06T07:08:18+0000 [Broker,client] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): using PTY: False2946buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2947buildbot # Dload Upload Total Spent Left Speed2948buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 199.3k 0 0100 2935 100 2935 0 0 139.7k 0 0100 2935 100 2935 0 0 119.1k 0 02949buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.13 seconds)2950buildbot # [ 78.515343] nix-daemon[1338]: accepted connection from pid 2061, user buildbot-worker2951buildbot # [ 78.565111] twistd[1067]: 2026-09-06T07:08:19+0000 [-] (command ['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']): command finished with signal None, exit code 1, elapsedTime: 0.4212032952buildbot # [ 78.572663] twistd[1067]: 2026-09-06T07:08:19+0000 [-] (command 41): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xfd7dd1ae68d0>2953buildbot # [ 78.575244] twistd[1066]: 2026-09-06T07:08:19+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'run', '--rev', '85a19a95810dd141218f06f69f0799ad65280d4f', '--branch', 'test-pr-effects', '--repo', 'gitea-admin/test-flake', 'test-effect']'> rc=12954buildbot # [ 78.606746] twistd[1066]: 2026-09-06T07:08:19+0000 [-] releaseLocks(ShellCommand(name='Run effects', command=['buildbot-effects', 'run', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project), Property(command)], logEnviron=False)): []2955buildbot # [ 78.616948] twistd[1066]: 2026-09-06T07:08:19+0000 [-] step 'Run effects' complete: failure (["'buildbot-effects run ...' (failure)"])2956buildbot # [ 78.620433] twistd[1066]: 2026-09-06T07:08:19+0000 [-] <Build gitea-admin/test-flake/run-effect number:2 results:failure>: build finished2957buildbot # [ 78.630216] twistd[1066]: 2026-09-06T07:08:19+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2958buildbot # [ 78.800966] twistd[1066]: 2026-09-06T07:08:19+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, effects_scheduler='gitea-admin-test-flake-run-effect', name='Buildbot effect', effects=['test-effect'])): []2959buildbot # [ 78.817448] twistd[1066]: 2026-09-06T07:08:19+0000 [-] step 'Buildbot effect' complete: failure (['triggered gitea-admin-test-flake-run-effect, 1 failure'])2960buildbot # [ 78.844569] twistd[1066]: 2026-09-06T07:08:19+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.gitea_projects.GiteaProject object at 0xe3e30430fb60>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/gitea-admin-test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3041d8880>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe3e3041d9170>, logEnviron=False)): []2961buildbot # [ 78.865749] twistd[1066]: 2026-09-06T07:08:19+0000 [-] step 'Evaluate scheduled effects' complete: skipped (None)2962buildbot # [ 78.869978] twistd[1066]: 2026-09-06T07:08:19+0000 [-] <Build gitea-admin/test-flake/nix-eval number:2 results:failure>: build finished2963buildbot # [ 78.882822] twistd[1066]: 2026-09-06T07:08:19+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []2964buildbot # [ 78.936478] gitea[808]: 2026/09/06 07:08:19 HTTPRequest [I] router: completed POST /api/v1/repos/gitea-admin/test-flake/statuses/85a19a95810dd141218f06f69f0799ad65280d4f for [::1]:36750, 201 Created in 99.9ms @ repo/status.go:21(repo.NewCommitStatus)2965buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds2966buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2967buildbot # Dload Upload Total Spent Left Speed2968buildbot # 0 0 0 0 0 0 0 0 0100 1986 100 1986 0 0 92999 0 0100 1986 100 1986 0 0 78457 0 0100 1986 100 1986 0 0 68273 0 02969buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)2970buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties2971buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2972buildbot # Dload Upload Total Spent Left Speed2973buildbot # 0 0 0 0 0 0 0 0 0100 937 100 937 0 0 63182 0 0100 937 100 937 0 0 53211 0 0100 937 100 937 0 0 46157 0 02974buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.07 seconds)2975buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties2976buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2977buildbot # Dload Upload Total Spent Left Speed2978buildbot # 0 0 0 0 0 0 0 0 0100 2095 100 2095 0 0 179.1k 0 0100 2095 100 2095 0 0 144.1k 0 0100 2095 100 2095 0 0 123.1k 0 02979buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)2980buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2981buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2982buildbot # Dload Upload Total Spent Left Speed2983buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 149.1k 0 0100 1735 100 1735 0 0 120.1k 0 0100 1735 100 1735 0 0 102.1k 0 02984buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2985buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties2986buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2987buildbot # Dload Upload Total Spent Left Speed2988buildbot # 0 0 0 0 0 0 0 0 0100 1735 100 1735 0 0 150.2k 0 0100 1735 100 1735 0 0 123.0k 0 0100 1735 100 1735 0 0 104.9k 0 02989buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.06 seconds)2990buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties2991buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2992buildbot # Dload Upload Total Spent Left Speed2993buildbot # 0 0 0 0 0 0 0 0 0100 2104 100 2104 0 0 149.7k 0 0100 2104 100 2104 0 0 127.0k 0 0100 2104 100 2104 0 0 110.4k 0 02994buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/5/properties, in 0.06 seconds)2995buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties2996buildbot # % Total % Received % Xferd Average Speed Time Time Time Current2997buildbot # Dload Upload Total Spent Left Speed2998buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 248.9k 0 0100 2935 100 2935 0 0 200.2k 0 0100 2935 100 2935 0 0 171.3k 0 02999buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)3000buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties3001buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3002buildbot # Dload Upload Total Spent Left Speed3003buildbot # 0 0 0 0 0 0 0 0 0100 2935 100 2935 0 0 248.4k 0 0100 2935 100 2935 0 0 204.9k 0 0100 2935 100 2935 0 0 171.7k 0 03004buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)3005buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps3006buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3007buildbot # Dload Upload Total Spent Left Speed3008buildbot # 0 0 0 0 0 0 0 0 0100 3518 100 3518 0 0 276.0k 0 0100 3518 100 3518 0 0 230.2k 0 0100 3518 100 3518 0 0 194.9k 0 03009buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps, in 0.06 seconds)3010buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps3011buildbot # % Total % Received % Xferd Average Speed Time Time Time Current3012buildbot # Dload Upload Total Spent Left Speed3013buildbot # 0 0 0 0 0 0 0 0 0100 3518 100 3518 0 0 228.9k 0 0100 3518 100 3518 0 0 195.3k 0 0100 3518 100 3518 0 0 172.0k 0 03014buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/steps, in 0.07 seconds)3015(finished: subtest: PR with effects_on_pull_requests runs effects, in 18.37 seconds)3016(finished: run the VM test script, in 80.65 seconds)3017test script finished in 80.70s3018cleanup3019kill QemuMachine (pid 45)3020buildbot # qemu-system-aarch64: terminating on signal 15 from pid 39 (/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin/python3.14)3021(finished: cleanup, in 0.33 seconds)3022additionally exposed symbols:3023 buildbot,3024 vlan1,3025 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh3026Token created: e3e2b0593f...3027{'meta': {'total': 0}, 'projects': []}3028Project not yet registered, current projects: []3029{'meta': {'total': 1},3030 'projects': [{'active': None,3031 'description': None,3032 'description_format': None,3033 'description_html': None,3034 'name': 'gitea-admin/test-flake',3035 'projectid': 1,3036 'slug': 'gitea-admin/test-flake'}]}3037nix-eval build not found yet3038nix-eval build not found yet3039nix-eval build not found yet3040nix-eval build not found yet3041nix-eval build not found yet3042nix-eval build not found yet3043nix-eval build not found yet3044nix-eval build still running3045nix-eval build still running3046nix-eval build still running3047nix-eval build still running3048nix-eval build still running3049nix-eval build still running3050nix-eval build still running3051nix-eval build still running3052nix-eval build still running3053nix-eval build still running3054nix-eval build still running3055nix-eval build completed with result: 23056PR eval build not found yet3057PR eval build still running3058PR eval build still running3059PR eval build still running3060PR eval build still running3061PR eval build still running3062PR eval build still running3063PR eval build still running3064PR eval build still running3065PR eval build still running3066PR eval build result: 2