vm-test-run-buildbot-nix-poller
checks.aarch64-linux.poller
· build #62
· raw
1tribuchet: building on eliza2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600.0 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 45)12buildbot # Formatting '/build/vm-state-buildbot/tmp.fvzbOalP6r', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: b805960a-6125-41f0-a1e1-cf08794e6e4817buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40]27buildbot # [ 0.000000] Linux version 6.18.49 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Wed Sep 2 12:31:51 UTC 202628buildbot # [ 0.000000] KASLR enabled29buildbot # [ 0.000000] random: crng init done30buildbot # [ 0.000000] Machine model: linux,dummy-virt31buildbot # [ 0.000000] efi: UEFI not found.32buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT33buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]34buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded700-0x7fdf0e7f]35buildbot # [ 0.000000] Zone ranges:36buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]37buildbot # [ 0.000000] DMA32 empty38buildbot # [ 0.000000] Normal empty39buildbot # [ 0.000000] Device empty40buildbot # [ 0.000000] Movable zone start for each node41buildbot # [ 0.000000] Early memory node ranges42buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]43buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]44buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc0000045buildbot # [ 0.000000] psci: probing for conduit method from DT.46buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware.47buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs48buildbot # [ 0.000000] psci: Trusted OS migration not required49buildbot # [ 0.000000] psci: SMC Calling Convention v1.150buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)51buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186648 r8192 d116456 u31129652buildbot # [ 0.000000] Detected PIPT I-cache on CPU053buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm)54buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface55buildbot # [ 0.000000] CPU features: detected: Spectre-v456buildbot # [ 0.000000] CPU features: detected: Spectre-BHB57buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_3858buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_2359buildbot # [ 0.000000] alternatives: applying boot alternatives60buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/b9sh498p2gwjnbg68mb7150f4b8ap20w-nixos-system-buildbot-test/init regInfo=/nix/store/qfvlalg8d4kjvb8khm7bis58n5n6wv40-closure-info/registration console=ttyAMA0,115200n8 console=tty061buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/qfvlalg8d4kjvb8khm7bis58n5n6wv40-closure-info/registration", will be passed to user space.62buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes63buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)64buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)65buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB66buildbot # [ 0.000000] software IO TLB: area num 1.67buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB)68buildbot # [ 0.000000] Fallback order for Node 0: 069buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 26214470buildbot # [ 0.000000] Policy zone: DMA71buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off72buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=173buildbot # [ 0.000000] allocated 2097152 bytes of page_ext74buildbot # [ 0.000000] ftrace: allocating 74886 entries in 294 pages75buildbot # [ 0.000000] ftrace: allocated 294 pages with 4 groups76buildbot # [ 0.000000] rcu: Hierarchical RCU implementation.77buildbot # [ 0.000000] rcu: RCU event tracing is enabled.78buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.79buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled.80buildbot # [ 0.000000] Rude variant of Tasks RCU enabled.81buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled.82buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.83buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=184buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.85buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.86buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.87buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 088buildbot # [ 0.000000] GICv3: 256 SPIs implemented89buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented90buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq91buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI92buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=093buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a000094buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff]95buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44cf0000 (indirect, esz 8, psz 64K, shr 1)96buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44d00000 (flat, esz 8, psz 64K, shr 1)97buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d1000098buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d2000099buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.100buildbot # [ 0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns101buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).102buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns103buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns104buildbot # [ 0.000029] arm-pv: using stolen time PV105buildbot # [ 0.000417] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)106buildbot # [ 0.000536] Console: colour dummy device 80x25107buildbot # [ 0.000545] printk: legacy console [tty0] enabled108buildbot # [ 0.000739] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000)109buildbot # [ 0.000746] pid_max: default: 32768 minimum: 301110buildbot # [ 0.000819] LSM: initializing lsm=capability,landlock,yama,bpf,ima111buildbot # [ 0.000953] landlock: Up and running.112buildbot # [ 0.000955] Yama: becoming mindful.113buildbot # [ 0.001419] LSM support for eBPF active114buildbot # [ 0.001549] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)115buildbot # [ 0.001575] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)116buildbot # [ 0.002709] cacheinfo: Unable to detect cache hierarchy for CPU 0117buildbot # [ 0.003405] rcu: Hierarchical SRCU implementation.118buildbot # [ 0.003410] rcu: Max phase no-delay instances is 1000.119buildbot # [ 0.004605] fsl-mc MSI: its@8080000 domain created120buildbot # [ 0.004693] EFI services will not be available.121buildbot # [ 0.004759] smp: Bringing up secondary CPUs ...122buildbot # [ 0.004767] smp: Brought up 1 node, 1 CPU123buildbot # [ 0.004770] SMP: Total of 1 processors activated.124buildbot # [ 0.004773] CPU: All CPU(s) started at EL1125buildbot # [ 0.004788] CPU features: detected: Branch Target Identification126buildbot # [ 0.004793] CPU features: detected: ARMv8.4 Translation Table Level127buildbot # [ 0.004796] CPU features: detected: Instruction cache invalidation not required for I/D coherence128buildbot # [ 0.004800] CPU features: detected: Data cache clean to the PoU not required for I/D coherence129buildbot # [ 0.004803] CPU features: detected: Common not Private translations130buildbot # [ 0.004807] CPU features: detected: CRC32 instructions131buildbot # [ 0.004810] CPU features: detected: Data cache clean to Point of Deep Persistence132buildbot # [ 0.004813] CPU features: detected: Data cache clean to Point of Persistence133buildbot # [ 0.004816] CPU features: detected: Data independent timing control (DIT)134buildbot # [ 0.004820] CPU features: detected: E0PD135buildbot # [ 0.004822] CPU features: detected: Enhanced Counter Virtualization136buildbot # [ 0.004825] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)137buildbot # [ 0.004829] CPU features: detected: Enhanced Virtualization Traps138buildbot # [ 0.004832] CPU features: detected: Fine Grained Traps139buildbot # [ 0.004836] CPU features: detected: Generic authentication (architected QARMA5 algorithm)140buildbot # [ 0.004841] CPU features: detected: RCpc load-acquire (LDAPR)141buildbot # [ 0.004844] CPU features: detected: LSE atomic instructions142buildbot # [ 0.004847] CPU features: detected: Privileged Access Never143buildbot # [ 0.004850] CPU features: detected: PMUv3144buildbot # [ 0.004853] CPU features: detected: RAS Extension Support145buildbot # [ 0.004855] CPU features: detected: RASv1p1 Extension Support146buildbot # [ 0.004858] CPU features: detected: Random Number Generator147buildbot # [ 0.004861] CPU features: detected: Speculation barrier (SB)148buildbot # [ 0.004863] CPU features: detected: Stage-2 Force Write-Back149buildbot # [ 0.004866] CPU features: detected: TLB range maintenance instructions150buildbot # [ 0.004871] CPU features: detected: Speculative Store Bypassing Safe (SSBS)151buildbot # [ 0.004909] alternatives: applying system-wide alternatives152buildbot # [ 0.007868] CPU features: detected: BBM Level 2 without TLB conflict abort153buildbot # [ 0.008045] Memory: 894336K/1048576K available (24448K kernel code, 7090K rwdata, 26344K rodata, 4736K init, 1107K bss, 112948K reserved, 32768K cma-reserved)154buildbot # [ 0.008380] devtmpfs: initialized155buildbot # [ 0.010085] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)156buildbot # [ 0.010107] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).157buildbot # [ 0.010266] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL158buildbot # [ 0.010271] 0 pages in range for non-PLT usage159buildbot # [ 0.010272] 508288 pages in range for PLT usage160buildbot # [ 0.010375] pinctrl core: initialized pinctrl subsystem161buildbot # [ 0.011055] DMI not present or invalid.162buildbot # [ 0.014084] NET: Registered PF_NETLINK/PF_ROUTE protocol family163buildbot # [ 0.016319] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations164buildbot # [ 0.016477] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations165buildbot # [ 0.016636] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations166buildbot # [ 0.016657] audit: initializing netlink subsys (disabled)167buildbot # [ 0.017199] thermal_sys: Registered thermal governor 'fair_share'168buildbot # [ 0.017201] thermal_sys: Registered thermal governor 'bang_bang'169buildbot # [ 0.017205] thermal_sys: Registered thermal governor 'step_wise'170buildbot # [ 0.017208] thermal_sys: Registered thermal governor 'user_space'171buildbot # [ 0.017213] thermal_sys: Registered thermal governor 'power_allocator'172buildbot # [ 0.017242] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1173buildbot # [ 0.017253] cpuidle: using governor ladder174buildbot # [ 0.017258] cpuidle: using governor menu175buildbot # [ 0.017448] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers.176buildbot # [ 0.017464] ASID allocator initialised with 65536 entries177buildbot # [ 0.018641] Serial: AMBA PL011 UART driver178buildbot # [ 0.023798] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1179buildbot # [ 0.023927] printk: console [ttyAMA0] enabled180buildbot # [ 0.148091] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages181buildbot # [ 0.148108] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page182buildbot # [ 0.148114] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages183buildbot # [ 0.148118] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page184buildbot # [ 0.148123] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages185buildbot # [ 0.148127] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page186buildbot # [ 0.148131] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages187buildbot # [ 0.148135] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page188buildbot # [ 0.155687] fbcon: Taking over console189buildbot # [ 0.155702] ACPI: Interpreter disabled.190buildbot # [ 0.164376] iommu: Default domain type: Translated191buildbot # [ 0.164386] iommu: DMA domain TLB invalidation policy: strict mode192buildbot # [ 0.164712] SCSI subsystem initialized193buildbot # [ 0.166670] usbcore: registered new interface driver usbfs194buildbot # [ 0.166701] usbcore: registered new interface driver hub195buildbot # [ 0.166724] usbcore: registered new device driver usb196buildbot # [ 0.166987] pps_core: LinuxPPS API ver. 1 registered197buildbot # [ 0.166994] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>198buildbot # [ 0.167004] PTP clock support registered199buildbot # [ 0.167051] EDAC MC: Ver: 3.0.0200buildbot # [ 0.171567] scmi_core: SCMI protocol bus registered201buildbot # [ 0.172548] FPGA manager framework202buildbot # [ 0.173537] vgaarb: loaded203buildbot # [ 0.174174] clocksource: Switched to clocksource arch_sys_counter204buildbot # [ 0.178460] VFS: Disk quotas dquot_6.6.0205buildbot # [ 0.178501] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)206buildbot # [ 0.180132] netfs: FS-Cache loaded207buildbot # [ 0.180229] pnp: PnP ACPI: disabled208buildbot # [ 0.184102] NET: Registered PF_INET protocol family209buildbot # [ 0.184258] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)210buildbot # [ 0.212360] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)211buildbot # [ 0.212395] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)212buildbot # [ 0.212417] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)213buildbot # [ 0.212457] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)214buildbot # [ 0.212532] TCP: Hash tables configured (established 8192 bind 8192)215buildbot # [ 0.212600] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)216buildbot # [ 0.212632] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)217buildbot # [ 0.212657] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)218buildbot # [ 0.212740] NET: Registered PF_UNIX/PF_LOCAL protocol family219buildbot # [ 0.212779] NET: Registered PF_XDP protocol family220buildbot # [ 0.212798] PCI: CLS 0 bytes, default 64221buildbot # [ 0.213014] Trying to unpack rootfs image as initramfs...222buildbot # [ 0.227797] kvm [1]: HYP mode not available223buildbot # [ 0.318613] Initialise system trusted keyrings224buildbot # [ 0.319302] workingset: timestamp_bits=42 max_order=18 bucket_order=0225buildbot # [ 0.320500] squashfs: version 4.0 (2009/01/31) Phillip Lougher226buildbot # [ 0.321252] 9p: Installing v9fs 9p2000 file system support227buildbot # [ 0.341819] Key type asymmetric registered228buildbot # [ 0.341834] Asymmetric key parser 'x509' registered229buildbot # [ 0.341901] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)230buildbot # [ 0.350227] io scheduler mq-deadline registered231buildbot # [ 0.350242] io scheduler kyber registered232buildbot # [ 0.358299] pl061_gpio 9030000.pl061: PL061 GPIO chip registered233buildbot # [ 0.359598] ledtrig-cpu: registered to indicate activity on CPUs234buildbot # [ 0.359958] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:235buildbot # [ 0.359974] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000236buildbot # [ 0.359989] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000237buildbot # [ 0.359998] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000238buildbot # [ 0.360020] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits239buildbot # [ 0.360040] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]240buildbot # [ 0.360125] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00241buildbot # [ 0.360135] pci_bus 0000:00: root bus resource [bus 00-ff]242buildbot # [ 0.360140] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]243buildbot # [ 0.360145] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]244buildbot # [ 0.360151] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]245buildbot # [ 0.360212] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint246buildbot # [ 0.360644] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint247buildbot # [ 0.360827] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f]248buildbot # [ 0.360842] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]249buildbot # [ 0.360872] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]250buildbot # [ 0.360888] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]251buildbot # [ 0.361332] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint252buildbot # [ 0.361511] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f]253buildbot # [ 0.361526] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]254buildbot # [ 0.361555] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]255buildbot # [ 0.361995] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint256buildbot # [ 0.390227] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f]257buildbot # [ 0.390256] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]258buildbot # [ 0.390286] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]259buildbot # [ 0.390764] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint260buildbot # [ 0.390947] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f]261buildbot # [ 0.390963] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]262buildbot # [ 0.390992] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]263buildbot # [ 0.391449] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint264buildbot # [ 0.391629] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f]265buildbot # [ 0.391644] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]266buildbot # [ 0.391674] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]267buildbot # [ 0.392122] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint268buildbot # [ 0.392304] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f]269buildbot # [ 0.392320] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]270buildbot # [ 0.392350] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]271buildbot # [ 0.392795] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint272buildbot # [ 0.392976] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f]273buildbot # [ 0.392992] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff]274buildbot # [ 0.393021] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]275buildbot # [ 0.393037] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref]276buildbot # [ 0.393537] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint277buildbot # [ 0.393722] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]278buildbot # [ 0.393752] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]279buildbot # [ 0.394227] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint280buildbot # [ 0.394411] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]281buildbot # [ 0.394440] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]282buildbot # [ 0.394818] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint283buildbot # [ 0.394997] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff]284buildbot # [ 0.395247] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint285buildbot # [ 0.395506] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f]286buildbot # [ 0.395523] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]287buildbot # [ 0.395553] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]288buildbot # [ 0.396009] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint289buildbot # [ 0.396189] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f]290buildbot # [ 0.396205] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]291buildbot # [ 0.396233] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]292buildbot # [ 0.396782] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned293buildbot # [ 0.396794] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned294buildbot # [ 0.396800] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned295buildbot # [ 0.396842] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned296buildbot # [ 0.396887] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned297buildbot # [ 0.396932] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned298buildbot # [ 0.396981] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned299buildbot # [ 0.397027] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned300buildbot # [ 0.397072] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned301buildbot # [ 0.397118] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned302buildbot # [ 0.397164] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned303buildbot # [ 0.397209] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned304buildbot # [ 0.397271] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned305buildbot # [ 0.397316] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned306buildbot # [ 0.397337] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned307buildbot # [ 0.397357] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned308buildbot # [ 0.397378] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned309buildbot # [ 0.397399] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned310buildbot # [ 0.397422] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned311buildbot # [ 0.397443] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned312buildbot # [ 0.397464] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned313buildbot # [ 0.397485] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned314buildbot # [ 0.397507] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned315buildbot # [ 0.397528] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned316buildbot # [ 0.397550] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned317buildbot # [ 0.397571] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned318buildbot # [ 0.397591] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned319buildbot # [ 0.397612] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned320buildbot # [ 0.397632] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned321buildbot # [ 0.397653] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned322buildbot # [ 0.397673] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned323buildbot # [ 0.397696] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned324buildbot # [ 0.397717] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned325buildbot # [ 0.397739] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned326buildbot # [ 0.397764] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]327buildbot # [ 0.397773] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]328buildbot # [ 0.397778] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]329buildbot # [ 0.462967] pci 0000:00:0a.0: enabling device (0000 -> 0002)330buildbot # [ 0.483550] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)331buildbot # [ 0.485624] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)332buildbot # [ 0.496682] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)333buildbot # [ 0.502749] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)334buildbot # [ 0.504632] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)335buildbot # [ 0.514669] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)336buildbot # [ 0.516659] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003)337buildbot # [ 0.526721] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)338buildbot # [ 0.529634] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)339buildbot # [ 0.531397] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)340buildbot # [ 0.533495] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)341buildbot # [ 0.551389] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled342buildbot # [ 0.553920] msm_serial: driver initialized343buildbot # [ 0.554088] SuperH (H)SCI(F) driver initialized344buildbot # [ 0.554142] STM32 USART driver initialized345buildbot # [ 0.590403] loop: module loaded346buildbot # [ 0.590569] virtio_blk virtio5: 1/0/0 default/read/poll queues347buildbot # [ 0.591297] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)348buildbot # [ 0.598746] megasas: 07.734.00.00-rc1349buildbot # [ 0.599402] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]350buildbot # [ 0.601507] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000351buildbot # [ 0.601531] Intel/Sharp Extended Query Table at 0x0031352buildbot # [ 0.603075] Using buffer write method353buildbot # [ 0.603136] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]354buildbot # [ 0.604880] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000355buildbot # [ 0.604901] Intel/Sharp Extended Query Table at 0x0031356buildbot # [ 0.622224] Using buffer write method357buildbot # [ 0.622251] Concatenating MTD devices:358buildbot # [ 0.622255] (0): "0.flash"359buildbot # [ 0.622259] (1): "0.flash"360buildbot # [ 0.622262] into device "0.flash"361buildbot # [ 0.841655] Freeing initrd memory: 26088K362buildbot # [ 0.847779] tun: Universal TUN/TAP device driver, 1.6363buildbot # [ 0.851587] thunder_xcv, ver 1.0364buildbot # [ 0.851627] thunder_bgx, ver 1.0365buildbot # [ 0.851650] nicpf, ver 1.0366buildbot # [ 0.852202] e1000: Intel(R) PRO/1000 Network Driver367buildbot # [ 0.852209] e1000: Copyright (c) 1999-2006 Intel Corporation.368buildbot # [ 0.852236] e1000e: Intel(R) PRO/1000 Network Driver369buildbot # [ 0.852244] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.370buildbot # [ 0.852274] igb: Intel(R) Gigabit Ethernet Network Driver371buildbot # [ 0.852280] igb: Copyright (c) 2007-2014 Intel Corporation.372buildbot # [ 0.852303] igbvf: Intel(R) Gigabit Virtual Function Network Driver373buildbot # [ 0.852309] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.374buildbot # [ 0.852446] sky2: driver version 1.30375buildbot # [ 0.854006] usbcore: registered new interface driver usb-storage376buildbot # [ 0.854157] usbcore: registered new interface driver usbserial_generic377buildbot # [ 0.854817] ehci-pci 0000:00:0a.0: EHCI Host Controller378buildbot # [ 0.854859] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1379buildbot # [ 0.855020] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000380buildbot # [ 0.866064] usbserial: USB Serial support registered for generic381buildbot # [ 0.866207] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00382buildbot # [ 0.866554] hub 1-0:1.0: USB hub found383buildbot # [ 0.866575] hub 1-0:1.0: 6 ports detected384buildbot # [ 0.869875] hv_vmbus: registering driver hyperv_keyboard385buildbot # [ 0.871421] rtc-pl031 9010000.pl031: registered as rtc0386buildbot # [ 0.871448] rtc-pl031 9010000.pl031: setting system clock to 2026-09-06T07:06:58 UTC (1788678418)387buildbot # [ 0.871747] i2c_dev: i2c /dev entries driver388buildbot # [ 0.876662] sdhci: Secure Digital Host Controller Interface driver389buildbot # [ 0.876674] sdhci: Copyright(c) Pierre Ossman390buildbot # [ 0.876940] Synopsys Designware Multimedia Card Interface Driver391buildbot # [ 0.877309] sdhci-pltfm: SDHCI platform and OF driver helper392buildbot # [ 0.881731] hid: raw HID events driver (C) Jiri Kosina393buildbot # [ 0.881983] usbcore: registered new interface driver usbhid394buildbot # [ 0.881991] usbhid: USB HID core driver395buildbot # [ 0.930483] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available396buildbot # [ 0.932001] drop_monitor: Initializing network drop monitor service397buildbot # [ 0.932184] NET: Registered PF_INET6 protocol family398buildbot # [ 0.935195] Segment Routing with IPv6399buildbot # [ 0.935219] In-situ OAM (IOAM) with IPv6400buildbot # [ 0.935246] NET: Registered PF_PACKET protocol family401buildbot # [ 0.936894] 9pnet: Installing 9P2000 support402buildbot # [ 0.939628] Key type dns_resolver registered403buildbot # [ 0.946019] registered taskstats version 1404buildbot # [ 0.946715] Loading compiled-in X.509 certificates405buildbot # [ 0.954894] Demotion targets for Node 0: null406buildbot # [ 0.954998] Key type .fscrypt registered407buildbot # [ 0.955005] Key type fscrypt-provisioning registered408buildbot # [ 0.955096] ima: No TPM chip found, activating TPM-bypass!409buildbot # [ 0.955116] ima: Allocated hash algorithm: sha1410buildbot # [ 0.955144] ima: No architecture policies found411buildbot # [ 0.959164] input: gpio-keys as /devices/platform/gpio-keys/input/input0412buildbot # [ 0.977422] clk: Disabling unused clocks413buildbot # [ 0.977445] PM: genpd: Disabling unused power domains414buildbot # [ 0.981676] Freeing unused kernel memory: 4736K415buildbot # [ 0.981867] Run /init as init process416buildbot # [ 0.996343] systemd[1]: Successfully made /usr/ read-only.417buildbot # [ 1.154252] usb 1-1: new high-speed USB device number 2 using ehci-pci418buildbot # [ 1.306504] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1419buildbot # [ 1.331110] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)420buildbot # [ 1.343240] systemd[1]: Detected virtualization qemu.421buildbot # [ 1.343315] systemd[1]: Detected architecture arm64.422buildbot # [ 1.343330] systemd[1]: Running in initrd.423buildbot # [ 1.344253] systemd[1]: Initializing machine ID from random generator.424buildbot # [ 1.344510] systemd[1]: Hostname set to <buildbot>.425buildbot # [ 1.398444] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0426buildbot # [ 1.518221] usb 1-2: new high-speed USB device number 3 using ehci-pci427buildbot # [ 1.656134] systemd[1]: bpf-restrict-fs: LSM BPF program attached428buildbot # [ 1.674824] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2429buildbot # [ 1.680472] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0430buildbot # [ 1.770693] systemd[1]: Queued start job for default target Initrd Default Target.431buildbot # [ 1.780506] systemd[1]: Created slice Slice /system/modprobe.432buildbot # [ 1.781706] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.433buildbot # [ 1.783128] systemd[1]: Expecting device /dev/disk/by-label/nixos...434buildbot # [ 1.783164] systemd[1]: Reached target Path Units.435buildbot # [ 1.783184] systemd[1]: Reached target Slice Units.436buildbot # [ 1.783204] systemd[1]: Reached target Swaps.437buildbot # [ 1.783224] systemd[1]: Reached target Timer Units.438buildbot # [ 1.783410] systemd[1]: Listening on D-Bus System Message Bus Socket.439buildbot # [ 1.783560] systemd[1]: Listening on Journal Socket (/dev/log).440buildbot # [ 1.783703] systemd[1]: Listening on Journal Sockets.441buildbot # [ 1.783836] systemd[1]: Listening on udev Control Socket.442buildbot # [ 1.783962] systemd[1]: Listening on udev Kernel Socket.443buildbot # [ 1.783984] systemd[1]: Reached target Socket Units.444buildbot # [ 1.794982] systemd[1]: Starting Create List of Static Device Nodes...445buildbot # [ 1.805205] systemd[1]: Starting Load Kernel Module 9pnet_virtio...446buildbot # [ 1.806506] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs447buildbot # [ 1.819816] systemd[1]: Mounting Kernel Configuration File System...448buildbot # [ 1.838764] systemd[1]: Starting Journal Service...449buildbot # [ 1.846842] systemd[1]: Starting Load Kernel Modules...450buildbot # [ 1.847781] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os451buildbot # [ 1.868069] systemd[1]: Starting Coldplug All udev Devices...452buildbot # [ 1.890492] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.453buildbot # [ 1.896459] systemd[1]: Finished Create List of Static Device Nodes.454buildbot # [ 1.897586] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.455buildbot # [ 1.897877] systemd[1]: Finished Load Kernel Module 9pnet_virtio.456buildbot # [ 1.898122] systemd[1]: Mounted Kernel Configuration File System.457buildbot # [ 1.910515] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...458buildbot # [ 1.914301] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev459buildbot # [ 1.918947] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0460buildbot # [ 1.919184] [drm] features: -virgl +edid -resource_blob -host_visible461buildbot # [ 1.919193] [drm] features: -context_init462buildbot # [ 1.919899] [drm] number of scanouts: 1463buildbot # [ 1.919918] [drm] number of cap sets: 0464buildbot # [ 1.930750] systemd-journald[73]: Collecting audit messages is disabled.465buildbot # [ 1.938481] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic466buildbot # [ 1.938496] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0467buildbot # [ 1.965809] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.468buildbot # [ 1.968344] systemd[1]: Starting Create Static Device Nodes in /dev...469buildbot # [ 1.978469] Console: switching to colour frame buffer device 160x50470buildbot # [ 1.985279] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device471buildbot # [ 2.010766] systemd[1]: Finished Load Kernel Modules.472buildbot # [ 2.013626] systemd[1]: Starting Apply Kernel Variables...473buildbot # [ 2.030351] systemd[1]: Finished Create Static Device Nodes in /dev.474buildbot # [ 2.030544] systemd[1]: Reached target Preparation for Local File Systems.475buildbot # [ 2.030576] systemd[1]: Reached target Local File Systems.476buildbot # [ 2.035650] systemd[1]: Starting Rule-based Manager for Device Events and Files...477buildbot # [ 2.078382] systemd[1]: Finished Apply Kernel Variables.478buildbot # [ 2.103799] systemd[1]: Started Journal Service.479buildbot # [ 2.088601] systemd-modules-load[74]: Inserted module 'dm_mod'480buildbot # [ 2.089688] systemd-modules-load[74]: Module 'virtio_balloon' is built in481buildbot # [ 2.095779] systemd-modules-load[74]: Module 'virtio_console' is built in482buildbot # [ 2.104370] systemd-modules-load[74]: Inserted module 'virtio_gpu'483buildbot # [ 2.105403] systemd-modules-load[74]: Module 'virtio_rng' is built in484buildbot # [ 2.106426] systemd[1]: Starting Create System Files and Directories...485buildbot # [ 2.107792] systemd-udevd[80]: Using default interface naming scheme 'v261'.486buildbot # [ 2.131803] systemd[1]: Finished Create System Files and Directories.487buildbot # [ 2.153031] systemd[1]: Started Rule-based Manager for Device Events and Files.488buildbot # [ 2.200154] systemd[1]: Starting Virtual Console Setup...489buildbot # [ 2.253816] systemd-vconsole-setup[102]: Configuration of first virtual console was skipped, ignoring remaining ones.490buildbot # [ 2.255658] systemd[1]: Finished Virtual Console Setup.491buildbot # [ 2.879723] systemd[1]: Finished Coldplug All udev Devices.492buildbot # [ 2.884245] systemd[1]: Reached target System Initialization.493buildbot # [ 2.885072] systemd[1]: Reached target Basic System.494buildbot # [ 3.059368] (udev-worker)[100]: Network interface NamePolicy= disabled on kernel command line.495buildbot # [ 3.068374] (udev-worker)[95]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.496buildbot # [ 3.073037] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line.497buildbot # [ 3.128974] systemd[1]: Found device /dev/disk/by-label/nixos.498buildbot # [ 3.141142] systemd[1]: Reached target Initrd Root Device.499buildbot # [ 3.147721] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...500buildbot # [ 3.189829] systemd-fsck[110]: nixos: clean, 12/65536 files, 13019/262144 blocks501buildbot # [ 3.195470] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.502buildbot # [ 3.200575] systemd[1]: Mounting /sysroot...503buildbot # [ 3.249913] EXT4-fs (vda): mounted filesystem b805960a-6125-41f0-a1e1-cf08794e6e48 r/w with ordered data mode. Quota mode: none.504buildbot # [ 3.239412] systemd[1]: Mounted /sysroot.505buildbot # [ 3.241250] systemd[1]: Reached target Initrd Root File System.506buildbot # [ 3.243335] systemd[1]: Starting Mountpoints Configured in the Real Root...507buildbot # [ 3.263829] systemd-sysroot-fstab-check[118]: /sysroot should be mounted in the initrd, will request daemon-reload.508buildbot # [ 3.271994] systemd[1]: Reload requested from client PID 118 ('systemd-sysroot') (unit initrd-parse-etc.service)...509buildbot # [ 3.278002] systemd[1]: Reloading...510buildbot # [ 3.496162] systemd[1]: Reloading finished in 222 ms.511buildbot # [ 3.534431] systemd-sysroot-fstab-check[118]: Requesting initrd-fs.target/start/replace...512buildbot # [ 3.538159] systemd-sysroot-fstab-check[118]: Requesting swap.target/start/replace...513buildbot # [ 3.544083] systemd[1]: Starting Load Kernel Module 9pnet_virtio...514buildbot # [ 3.551618] systemd[1]: initrd-parse-etc.service: Deactivated successfully.515buildbot # [ 3.553904] systemd[1]: Finished Mountpoints Configured in the Real Root.516buildbot # [ 3.556118] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.517buildbot # [ 3.577101] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.518buildbot # [ 3.578188] systemd[1]: Finished Load Kernel Module 9pnet_virtio.519buildbot # [ 3.854578] systemd[1]: Mounting /sysroot/nix/.ro-store...520buildbot # [ 3.866798] systemd[1]: Mounting /sysroot/nix/.rw-store...521buildbot # [ 3.879567] systemd[1]: Mounting /sysroot/run...522buildbot # [ 3.912128] systemd[1]: Mounting /sysroot/tmp/shared...523buildbot # [ 3.930861] systemd[1]: Mounting /sysroot/tmp/xchg...524buildbot # [ 3.937891] systemd[1]: Mounted /sysroot/run.525buildbot # [ 3.954753] systemd[1]: Mounted /sysroot/nix/.ro-store.526buildbot # [ 3.957635] systemd[1]: Mounted /sysroot/nix/.rw-store.527buildbot # [ 3.974417] systemd[1]: Starting rw-sysroot-nix-store.service...528buildbot # [ 3.984856] systemd[1]: Mounted /sysroot/tmp/shared.529buildbot # [ 3.994899] systemd[1]: Mounted /sysroot/tmp/xchg.530buildbot # [ 4.009024] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.531buildbot # [ 4.010108] systemd[1]: Finished rw-sysroot-nix-store.service.532buildbot # [ 4.379040] (udev-worker)[96]: mtd0ro: Failed to find and pin callout binary "/nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/lib/udev/mtd_probe": No such file or directory533buildbot # [ 4.387732] (udev-worker)[96]: mtd0ro: /nix/store/awq6qdiyxlvdp21km39qj020fcshgkia-systemd-261.2/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory534buildbot # [ 4.414761] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.535buildbot # [ 4.416062] systemd[1]: Stopped Virtual Console Setup.536buildbot # [ 4.419361] systemd[1]: Stopping Virtual Console Setup...537buildbot # [ 4.424595] systemd[1]: Starting Virtual Console Setup...538buildbot # [ 4.428085] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.539buildbot # [ 4.432183] systemd[1]: Stopped Virtual Console Setup.540buildbot # [ 4.437039] systemd[1]: Starting Virtual Console Setup...541buildbot # [ 4.465841] systemd-vconsole-setup[153]: Configuration of first virtual console was skipped, ignoring remaining ones.542buildbot # [ 4.467442] systemd[1]: Finished Virtual Console Setup.543buildbot # [ 4.857820] systemd[1]: Mounting /sysroot/nix/store...544buildbot # [ 4.921426] systemd[1]: Mounted /sysroot/nix/store.545buildbot # [ 4.927233] systemd[1]: Reached target Initrd File Systems.546buildbot # [ 4.930389] systemd[1]: Starting Find NixOS closure...547buildbot # [ 4.944404] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...548buildbot # [ 4.992131] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.549buildbot # [ 4.993996] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.550buildbot # [ 5.009490] systemd[1]: Finished Find NixOS closure.551buildbot # [ 5.012239] systemd[1]: Reached target Initrd Default Target.552buildbot # [ 5.014576] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...553buildbot # [ 5.045462] systemd[1]: Stopped target Initrd Default Target.554buildbot # [ 5.047659] systemd[1]: Stopped target Basic System.555buildbot # [ 5.052640] systemd[1]: Stopped target Initrd Root Device.556buildbot # [ 5.053780] systemd[1]: Stopped target Path Units.557buildbot # [ 5.054752] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.558buildbot # [ 5.057508] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.559buildbot # [ 5.064094] systemd[1]: Stopped target Slice Units.560buildbot # [ 5.065047] systemd[1]: Stopped target Socket Units.561buildbot # [ 5.065928] systemd[1]: Stopped target System Initialization.562buildbot # [ 5.066910] systemd[1]: Stopped target Swaps.563buildbot # [ 5.067687] systemd[1]: Stopped target Timer Units.564buildbot # [ 5.069102] systemd[1]: dbus.socket: Deactivated successfully.565buildbot # [ 5.070091] systemd[1]: Closed D-Bus System Message Bus Socket.566buildbot # [ 5.071069] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.567buildbot # [ 5.072406] systemd[1]: Stopped Find NixOS closure.568buildbot # [ 5.073230] systemd[1]: Starting Load Kernel Module 9pnet_virtio...569buildbot # [ 5.082445] systemd[1]: Starting rw-sysroot-nix-store.service...570buildbot # [ 5.083636] systemd[1]: systemd-sysctl.service: Deactivated successfully.571buildbot # [ 5.092257] systemd[1]: Stopped Apply Kernel Variables.572buildbot # [ 5.093209] systemd[1]: systemd-modules-load.service: Deactivated successfully.573buildbot # [ 5.094362] systemd[1]: Stopped Load Kernel Modules.574buildbot # [ 5.095186] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.575buildbot # [ 5.104597] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.576buildbot # [ 5.108755] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.577buildbot # [ 5.113376] systemd[1]: Stopped Create System Files and Directories.578buildbot # [ 5.115345] systemd[1]: Stopped target Local File Systems.579buildbot # [ 5.121740] systemd[1]: Stopped target Preparation for Local File Systems.580buildbot # [ 5.124243] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.581buildbot # [ 5.129495] systemd[1]: Stopped Coldplug All udev Devices.582buildbot # [ 5.130393] systemd[1]: Stopping Rule-based Manager for Device Events and Files...583buildbot # [ 5.131423] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.584buildbot # [ 5.135094] systemd[1]: Stopped Virtual Console Setup.585buildbot # [ 5.135915] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.586buildbot # [ 5.140237] systemd[1]: Finished Load Kernel Module 9pnet_virtio.587buildbot # [ 5.141108] systemd[1]: systemd-udevd.service: Deactivated successfully.588buildbot # [ 5.142183] systemd[1]: Stopped Rule-based Manager for Device Events and Files.589buildbot # [ 5.143170] systemd[1]: systemd-udevd.service: Consumed 1.399s CPU time over 3.103s wall clock time, 21.7M memory peak.590buildbot # [ 5.146321] systemd[1]: initrd-cleanup.service: Deactivated successfully.591buildbot # [ 5.147281] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.592buildbot # [ 5.148307] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.593buildbot # [ 5.149297] systemd[1]: Closed udev Control Socket.594buildbot # [ 5.150003] systemd[1]: Starting Cleanup udev Database...595buildbot # [ 5.150790] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.596buildbot # [ 5.151874] systemd[1]: Stopped Create Static Device Nodes in /dev.597buildbot # [ 5.160286] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.598buildbot # [ 5.161448] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.599buildbot # [ 5.162688] systemd[1]: kmod-static-nodes.service: Deactivated successfully.600buildbot # [ 5.164187] systemd[1]: Stopped Create List of Static Device Nodes.601buildbot # [ 5.168166] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.602buildbot # [ 5.169198] systemd[1]: Finished rw-sysroot-nix-store.service.603buildbot # [ 5.197601] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.604buildbot # [ 5.200474] systemd[1]: Finished Cleanup udev Database.605buildbot # [ 5.201274] systemd[1]: Reached target Switch Root.606buildbot # [ 5.204526] systemd[1]: Starting NixOS Activation...607buildbot # [ 5.361767] initrd-nixos-activation-start[179]: booting system configuration /nix/store/b9sh498p2gwjnbg68mb7150f4b8ap20w-nixos-system-buildbot-test608buildbot # [ 5.423999] initrd-nixos-activation-start[179]: running activation script...609buildbot # [ 5.825578] initrd-nixos-activation-start[202]: setting up /etc...610buildbot # [ 6.092638] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.611buildbot # [ 6.095344] systemd[1]: Finished NixOS Activation.612buildbot # [ 6.100246] systemd[1]: Starting Switch Root...613buildbot # [ 6.119039] systemd[1]: Switching root.614buildbot # [ 6.312808] systemd-journald[73]: Received SIGTERM from PID 1 (systemd).615buildbot # [ 6.908900] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)616buildbot # [ 6.921436] systemd[1]: Detected virtualization qemu.617buildbot # [ 6.924480] systemd[1]: Detected architecture arm64.618buildbot # [ 6.928434] systemd[1]: Detected first boot.619buildbot # [ 6.935157] systemd[1]: Initializing machine ID from random generator.620buildbot # [ 7.251684] systemd[1]: bpf-restrict-fs: LSM BPF program attached621buildbot # [ 7.423085] NET: Registered PF_VSOCK protocol family622buildbot # [ 7.429843] Guest personality initialized and is inactive623buildbot # [ 7.431093] VMCI host device registered (name=vmci, major=10, minor=261)624buildbot # [ 7.431117] Initialized host personality625buildbot # [ 7.484919] systemd[1]: Applying preset policy.626buildbot # [ 7.987103] systemd[1]: Populated /etc with preset unit settings.627buildbot # [ 8.500001] systemd[1]: initrd-switch-root.service: Deactivated successfully.628buildbot # [ 8.501634] systemd[1]: Stopped initrd-switch-root.service.629buildbot # [ 8.504849] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.630buildbot # [ 8.509579] systemd[1]: Created slice Slice /system/getty.631buildbot # [ 8.511738] systemd[1]: Created slice User and Session Slice.632buildbot # [ 8.512955] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.633buildbot # [ 8.514886] systemd[1]: Started Forward Password Requests to Wall Directory Watch.634buildbot # [ 8.516614] systemd[1]: Expecting device /dev/hvc0...635buildbot # [ 8.518107] systemd[1]: Expecting device /dev/ttyAMA0...636buildbot # [ 8.519668] systemd[1]: Reached target Local Encrypted Volumes.637buildbot # [ 8.521254] systemd[1]: Stopped target initrd-fs.target.638buildbot # [ 8.523686] systemd[1]: Stopped target initrd-root-fs.target.639buildbot # [ 8.524754] systemd[1]: Stopped target initrd-switch-root.target.640buildbot # [ 8.526427] systemd[1]: Reached target Virtual Machines and Containers.641buildbot # [ 8.528883] systemd[1]: Reached target Path Units.642buildbot # [ 8.529840] systemd[1]: Reached target Remote File Systems.643buildbot # [ 8.531491] systemd[1]: Reached target Slice Units.644buildbot # [ 8.533709] systemd[1]: Reached target Swaps.645buildbot # [ 8.537575] systemd[1]: Listening on Query the User Interactively for a Password.646buildbot # [ 8.542564] systemd[1]: Listening on Process Core Dump Socket.647buildbot # [ 8.546471] systemd[1]: Listening on Credential Encryption/Decryption.648buildbot # [ 8.550377] systemd[1]: Listening on Factory Reset Management.649buildbot # [ 8.551572] systemd[1]: Listening on Hostname Service Socket.650buildbot # [ 8.557036] systemd[1]: Starting Journal Log Access Socket...651buildbot # [ 8.559084] systemd[1]: Listening on Journal Audit Socket.652buildbot # [ 8.563611] systemd[1]: Listening on Console Output Muting Service Socket.653buildbot # [ 8.566287] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.654buildbot # [ 8.568483] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os655buildbot # [ 8.570932] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki656buildbot # [ 8.581435] systemd[1]: Listening on Disk Repartitioning Service Socket.657buildbot # [ 8.581868] systemd[1]: Listening on udev Control Socket.658buildbot # [ 8.583799] systemd[1]: Listening on udev Varlink Socket.659buildbot # [ 8.587891] systemd[1]: Mounting Huge Pages File System...660buildbot # [ 8.591862] systemd[1]: Mounting POSIX Message Queue File System...661buildbot # [ 8.602810] systemd[1]: Mounting Kernel Debug File System...662buildbot # [ 8.611795] systemd[1]: Mounting Kernel Trace File System...663buildbot # [ 8.625419] systemd[1]: Starting Create List of Static Device Nodes...664buildbot # [ 8.633448] systemd[1]: Starting Load Kernel Module 9pnet_virtio...665buildbot # [ 8.635379] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs666buildbot # [ 8.647030] systemd[1]: Mounting Kernel Configuration File System...667buildbot # [ 8.649259] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm668buildbot # [ 8.653549] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore669buildbot # [ 8.672920] systemd[1]: Starting Load Kernel Module fuse...670buildbot # [ 8.676385] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67671buildbot # [ 8.689045] systemd[1]: Starting Journal Service...672buildbot # [ 8.714244] systemd[1]: Starting Load Kernel Modules...673buildbot # [ 8.761199] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...674buildbot # [ 8.780577] fuse: init (API version 7.45)675buildbot # [ 8.792871] systemd[1]: Starting Remount Root and Kernel File Systems...676buildbot # [ 8.794550] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os677buildbot # [ 8.835826] systemd[1]: Queued start job for default target Multi-User System.678buildbot # [ 8.850439] systemd-journald[274]: Collecting audit messages is enabled.679buildbot # [ 8.857166] systemd[1]: Starting Coldplug All udev Devices...680buildbot # [ 8.848960] systemd[1]: systemd-journald.service: Deactivated successfully.681buildbot # [ 8.870484] systemd[1]: Started Journal Service.682buildbot # [ 8.859183] systemd-modules-load[275]: Module 'atkbd' is built in683buildbot # [ 8.866565] systemd-modules-load[275]: Module 'loop' is built in684buildbot # [ 8.867550] systemd[1]: Listening on Journal Log Access Socket.685buildbot # [ 8.875783] systemd[1]: Mounted Huge Pages File System.686buildbot # [ 8.884548] systemd[1]: Mounted POSIX Message Queue File System.687buildbot # [ 8.885539] systemd[1]: Mounted Kernel Debug File System.688buildbot # [ 8.886422] systemd[1]: Mounted Kernel Trace File System.689buildbot # [ 8.887279] systemd[1]: Finished Create List of Static Device Nodes.690buildbot # [ 8.908436] EXT4-fs (vda): re-mounted b805960a-6125-41f0-a1e1-cf08794e6e48.691buildbot # [ 8.899661] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.692buildbot # [ 8.906206] systemd[1]: Finished Load Kernel Module 9pnet_virtio.693buildbot # [ 8.913663] systemd[1]: Mounted Kernel Configuration File System.694buildbot # [ 8.916308] systemd[1]: modprobe@fuse.service: Deactivated successfully.695buildbot # [ 8.918444] systemd[1]: Finished Load Kernel Module fuse.696buildbot # [ 8.921530] systemd-modules-load[275]: Inserted module 'tls'697buildbot # [ 8.925925] systemd[1]: Finished Load Kernel Modules.698buildbot # [ 8.927290] systemd[1]: Finished Remount Root and Kernel File Systems.699buildbot # [ 8.929233] systemd[1]: Listening on Disk Image Download Service Socket.700buildbot # [ 8.934962] systemd[1]: Mounting FUSE Control File System...701buildbot # [ 8.941043] systemd[1]: Starting Flush Journal to Persistent Storage...702buildbot # [ 8.946269] systemd-oomd[276]: No swap; memory pressure usage will be degraded703buildbot # [ 8.953368] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore704buildbot # [ 8.956613] systemd[1]: Starting Load/Save OS Random Seed...705buildbot # [ 8.979134] systemd[1]: Starting Apply Kernel Variables...706buildbot # [ 8.993167] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...707buildbot # [ 8.996595] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os708buildbot # [ 9.005968] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.709buildbot # [ 9.046692] systemd-journald[274]: Received client request to flush runtime journal.710buildbot # [ 9.094523] systemd[1]: Finished Load/Save OS Random Seed.711buildbot # [ 9.098063] systemd[1]: Reached target First Boot Complete.712buildbot # [ 9.101426] systemd[1]: Mounted FUSE Control File System.713buildbot # [ 9.104716] systemd[1]: Finished Flush Journal to Persistent Storage.714buildbot # [ 9.128448] systemd[1]: Finished Apply Kernel Variables.715buildbot # [ 9.174017] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.716buildbot # [ 9.176619] systemd[1]: Starting Create Static Device Nodes in /dev...717buildbot # [ 9.266058] systemd[1]: Finished Create Static Device Nodes in /dev.718buildbot # [ 9.267040] systemd[1]: Reached target Preparation for Local File Systems.719buildbot # [ 9.269697] systemd[1]: Starting Rule-based Manager for Device Events and Files...720buildbot # [ 9.372414] systemd-udevd[307]: Using default interface naming scheme 'v261'.721buildbot # [ 9.485273] systemd[1]: Mounting /run/wrappers...722buildbot # [ 9.525719] systemd[1]: Started Rule-based Manager for Device Events and Files.723buildbot # [ 9.537245] systemd[1]: Mounted /run/wrappers.724buildbot # [ 9.538073] systemd[1]: Reached target Local File Systems.725buildbot # [ 9.544912] systemd[1]: Listening on Boot Loader Control Service Socket.726buildbot # [ 9.548746] systemd[1]: Starting register-nix-paths.service...727buildbot # [ 9.556207] systemd[1]: Starting Create SUID/SGID Wrappers...728buildbot # [ 9.559481] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.729buildbot # [ 9.574183] systemd[1]: Starting Save Transient machine-id to Disk...730buildbot # [ 9.606011] systemd[1]: Starting Create System Files and Directories...731buildbot # [ 9.688196] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.732buildbot # [ 9.694200] systemd[1]: Finished Save Transient machine-id to Disk.733buildbot # [ 9.769955] systemd[1]: Finished Create System Files and Directories.734buildbot # [ 9.783208] systemd[1]: Starting Rebuild Journal Catalog...735buildbot # [ 9.786515] systemd[1]: Starting Record System Boot/Shutdown in UTMP...736buildbot # [ 9.881369] systemd[1]: Finished Record System Boot/Shutdown in UTMP.737buildbot # [ 9.914729] systemd[1]: Finished Rebuild Journal Catalog.738buildbot # [ 9.920132] systemd[1]: Starting Update is Completed...739buildbot # [ 9.986316] systemd[1]: Finished Update is Completed.740buildbot # [ 10.519079] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.741buildbot # [ 10.520976] systemd[1]: Finished Create SUID/SGID Wrappers.742buildbot # [ 10.524150] systemd[1]: Finished Coldplug All udev Devices.743buildbot # [ 10.590121] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs744buildbot # [ 10.690262] systemd[1]: Finished register-nix-paths.service.745buildbot # [ 10.691803] systemd[1]: Reached target System Initialization.746buildbot # [ 10.695121] systemd[1]: Started Discard unused filesystem blocks once a week.747buildbot # [ 10.698003] systemd[1]: Started Daily Cleanup of Temporary Directories.748buildbot # [ 10.701380] systemd[1]: Reached target Timer Units.749buildbot # [ 10.703243] systemd[1]: Listening on D-Bus System Message Bus Socket.750buildbot # [ 10.708271] systemd[1]: Listening on Nix Daemon Socket.751buildbot # [ 10.709057] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).752buildbot # [ 10.710268] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.753buildbot # [ 10.711442] systemd[1]: Reached target Socket Units.754buildbot # [ 10.721079] systemd[1]: Reached target Basic System.755buildbot # [ 10.721848] systemd[1]: Starting Import lastlog data into lastlog2 database...756buildbot # [ 10.722799] systemd[1]: Starting Name Service Cache Daemon (nsncd)...757buildbot # [ 10.736483] systemd[1]: Starting Post-Boot Actions...758buildbot # [ 10.755814] systemd[1]: Started Reset console on configuration changes.759buildbot # [ 10.770428] systemd[1]: Starting resolvconf update...760buildbot # [ 10.772120] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.761buildbot # [ 10.813828] systemd[1]: Starting D-Bus System Message Bus...762buildbot # [ 10.824882] nsncd[394]: Sep 06 07:07:08.470 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"763buildbot # [ 10.834439] systemd[1]: Finished Post-Boot Actions.764buildbot # [ 10.838439] systemd[1]: Started Name Service Cache Daemon (nsncd).765buildbot # [ 10.904670] systemd[1]: Reached target Host and Network Name Lookups.766buildbot # [ 10.909860] systemd[1]: Reached target User and Group Name Lookups.767buildbot # [ 10.927343] systemd[1]: Starting User Login Management...768buildbot # [ 10.931616] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.769buildbot # [ 10.938482] systemd[1]: Finished Import lastlog data into lastlog2 database.770buildbot # [ 11.026195] dbus-broker-launch[399]: Looking up NSS user entry for 'systemd-timesync'...771buildbot # [ 11.043130] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.772buildbot # [ 11.048162] dbus-broker-launch[399]: NSS returned no entry for 'systemd-timesync'773buildbot # [ 11.057079] dbus-broker-launch[399]: Invalid user-name in /nix/store/g2iz7k5b6y3w1zb2v3xl599pkw3hnbfx-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"774buildbot # [ 11.059294] systemd[1]: Started backdoor.service.775buildbot # [ 11.094399] systemd[1]: Started D-Bus System Message Bus.776buildbot # [ 11.140677] systemd-logind[416]: New seat seat0.777buildbot # [ 11.151905] systemd[1]: Started User Login Management.778buildbot # [ 11.157501] dbus-broker-launch[399]: Ready779buildbot # [ 11.161527] systemd[1]: Starting linger-users.service...780buildbot # connecting to host...781buildbot # [ 11.203981] systemd[1]: Stopped target Host and Network Name Lookups.782buildbot # [ 11.210053] systemd[1]: Stopping Host and Network Name Lookups...783buildbot # [ 11.210944] systemd[1]: Stopped target User and Group Name Lookups.784buildbot # [ 11.211819] systemd[1]: Stopping User and Group Name Lookups...785buildbot # [ 11.225391] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...786buildbot # [ 11.230012] systemd[1]: nscd.service: Deactivated successfully.787buildbot # [ 11.235909] systemd[1]: Stopped Name Service Cache Daemon (nsncd).788buildbot: Guest shell says: b'Spawning backdoor root shell...\n'789buildbot # [ 11.249579] systemd[1]: Starting Name Service Cache Daemon (nsncd)...790buildbot: connected to guest root shell791buildbot: (connecting took 11.57 seconds)792buildbot: (finished: waiting for the VM to finish booting, in 12.06 seconds)793buildbot # [ 11.271840] systemd[1]: linger-users.service: Deactivated successfully.794buildbot # [ 11.281552] systemd[1]: Finished linger-users.service.795buildbot # [ 11.336226] systemd[1]: Started Name Service Cache Daemon (nsncd).796buildbot # [ 11.344421] systemd[1]: Reached target Host and Network Name Lookups.797buildbot # [ 11.352049] nsncd[474]: Sep 06 07:07:08.986 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"798buildbot # [ 11.354036] systemd[1]: Reached target User and Group Name Lookups.799buildbot # [ 11.398378] systemd[1]: Finished resolvconf update.800buildbot # [ 11.404524] systemd[1]: Reached target Preparation for Network.801buildbot # [ 11.416576] systemd[1]: Starting DHCP Client...802buildbot # [ 11.423484] systemd[1]: Starting Extra networking commands....803buildbot # [ 11.459606] (udev-worker)[315]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.804buildbot # [ 11.465705] (udev-worker)[315]: Network interface NamePolicy= disabled on kernel command line.805buildbot # [ 11.483432] (udev-worker)[316]: Network interface NamePolicy= disabled on kernel command line.806buildbot # [ 11.676997] dhcpcd[512]: dhcpcd-10.3.2 starting807buildbot # [ 11.695768] dhcpcd[552]: dev: loaded udev808buildbot # [ 11.757526] 8021q: 802.1Q VLAN Support v1.8809buildbot # [ 11.742938] systemd-logind[416]: Watching system buttons on /dev/input/event0 (gpio-keys)810buildbot # [ 11.749764] systemd[1]: Finished Extra networking commands..811buildbot # [ 11.753611] systemd[1]: Reached target Network.812buildbot # [ 11.761861] systemd[1]: Starting Nginx Web Server...813buildbot # [ 11.778607] systemd[1]: Starting PostgreSQL Server...814buildbot # [ 11.791625] systemd[1]: Starting SSH Daemon...815buildbot # [ 11.827389] systemd[1]: Starting Permit User Sessions...816buildbot # [ 11.832117] systemd[1]: Condition check resulted in Virtio network device being skipped.817buildbot # [ 11.866823] systemd[1]: Starting Address configuration of eth1...818buildbot # [ 11.935739] cfg80211: Loading compiled-in X.509 certificates for regulatory database819buildbot # [ 11.937659] systemd[1]: Finished Permit User Sessions.820buildbot # [ 11.967834] systemd[1]: Started Getty on tty1.821buildbot # [ 11.968998] systemd[1]: Reached target Login Prompts.822buildbot # [ 12.002469] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'823buildbot # [ 12.002953] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'824buildbot # [ 11.990470] sshd[568]: Server listening on 0.0.0.0 port 22.825buildbot # [ 11.991323] sshd[568]: Server listening on :: port 22.826buildbot # [ 12.010269] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2827buildbot # [ 12.010583] cfg80211: failed to load regulatory.db828buildbot # [ 12.016659] systemd[1]: Started SSH Daemon.829buildbot # [ 12.024307] systemd[1]: Starting Setup git test repository...830buildbot # [ 12.097261] 8021q: adding VLAN 0 to HW filter on device eth1831buildbot # [ 12.118603] network-addresses-eth1-start[570]: adding address 192.168.1.1/24... done832buildbot # [ 12.144708] network-addresses-eth1-start[570]: adding address 2001:db8:1::1/64... done833buildbot # [ 12.195169] 8021q: adding VLAN 0 to HW filter on device eth0834buildbot # [ 12.178456] dhcpcd[552]: eth0: waiting for carrier835buildbot # [ 12.184789] systemd[1]: Finished Address configuration of eth1.836buildbot # [ 12.189246] dhcpcd[552]: eth0: waiting for carrier837buildbot # [ 12.193237] dhcpcd[552]: eth0: carrier acquired838buildbot # [ 12.214002] dhcpcd[552]: DUID 00:01:00:01:32:2f:cd:9d:52:54:00:12:34:56839buildbot # [ 12.216947] dhcpcd[552]: eth0: IAID 00:12:34:56840buildbot # [ 12.219357] dhcpcd[552]: eth0: adding address fe80::5054:ff:fe12:3456[ 12.238660] mousedev: PS/2 mouse device common for all mice841buildbot # 842buildbot # [ 12.267618] setup-git-repo-start[602]: hint: Using 'master' as the name for the initial branch. This default branch name843buildbot # [ 12.272566] setup-git-repo-start[602]: hint: will change to "main" in Git 3.0. To configure the initial branch name844buildbot # [ 12.277929] setup-git-repo-start[602]: hint: to use in all of your new repositories, which will suppress this warning,845buildbot # [ 12.283261] setup-git-repo-start[602]: hint: call:846buildbot # [ 12.285957] setup-git-repo-start[602]: hint:847buildbot # [ 12.288345] setup-git-repo-start[602]: hint: git config --global init.defaultBranch <name>848buildbot # [ 12.292338] setup-git-repo-start[602]: hint:849buildbot # [ 12.294695] setup-git-repo-start[602]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and850buildbot # [ 12.299996] setup-git-repo-start[602]: hint: 'development'. The just-created branch can be renamed via this command:851buildbot # [ 12.302735] setup-git-repo-start[602]: hint:852buildbot # [ 12.310951] setup-git-repo-start[602]: hint: git branch -m <name>853buildbot # [ 12.312558] setup-git-repo-start[602]: hint:854buildbot # [ 12.313364] setup-git-repo-start[602]: hint: Disable this message with "git config set advice.defaultBranchName false"855buildbot # [ 12.323212] setup-git-repo-start[602]: Initialized empty Git repository in /srv/repos/test-flake.git/856buildbot # [ 12.352306] setup-git-repo-start[612]: hint: Using 'master' as the name for the initial branch. This default branch name857buildbot # [ 12.358006] setup-git-repo-start[612]: hint: will change to "main" in Git 3.0. To configure the initial branch name858buildbot # [ 12.363476] setup-git-repo-start[612]: hint: to use in all of your new repositories, which will suppress this warning,859buildbot # [ 12.370639] setup-git-repo-start[612]: hint: call:860buildbot # [ 12.371300] setup-git-repo-start[612]: hint:861buildbot # [ 12.371893] setup-git-repo-start[612]: hint: git config --global init.defaultBranch <name>862buildbot # [ 12.380929] setup-git-repo-start[612]: hint:863buildbot # [ 12.387227] setup-git-repo-start[612]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and864buildbot # [ 12.389429] setup-git-repo-start[612]: hint: 'development'. The just-created branch can be renamed via this command:865buildbot # [ 12.394850] setup-git-repo-start[612]: hint:866buildbot # [ 12.400388] setup-git-repo-start[612]: hint: git branch -m <name>867buildbot # [ 12.402870] setup-git-repo-start[612]: hint:868buildbot # [ 12.405267] setup-git-repo-start[612]: hint: Disable this message with "git config set advice.defaultBranchName false"869buildbot # [ 12.409465] setup-git-repo-start[612]: Initialized empty Git repository in /tmp/test-flake/.git/870buildbot # [ 12.414494] postgresql-pre-start[601]: The files belonging to this database system will be owned by user "postgres".871buildbot # [ 12.416597] postgresql-pre-start[601]: This user must also own the server process.872buildbot # [ 12.424679] nginx-pre-start[594]: nginx: the configuration file /nix/store/691m83dyqqpbdr0619zd4hr665mja8xd-nginx.conf syntax is ok873buildbot # [ 12.426621] nginx-pre-start[594]: nginx: configuration file /nix/store/691m83dyqqpbdr0619zd4hr665mja8xd-nginx.conf test is successful874buildbot # [ 12.438322] postgresql-pre-start[601]: The database cluster will be initialized with locale "en_US.UTF-8".875buildbot # [ 12.439584] postgresql-pre-start[601]: The default database encoding has accordingly been set to "UTF8".876buildbot # [ 12.445197] postgresql-pre-start[601]: The default text search configuration will be set to "english".877buildbot # [ 12.453181] postgresql-pre-start[601]: Data page checksums are enabled.878buildbot # [ 12.456851] postgresql-pre-start[601]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok879buildbot # [ 12.464361] postgresql-pre-start[601]: creating subdirectories ... ok880buildbot # [ 12.469855] postgresql-pre-start[601]: selecting dynamic shared memory implementation ... posix881buildbot # [ 12.475510] systemd[1]: Started Nginx Web Server.882buildbot # [ 12.484414] systemd-logind[416]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)883buildbot: (finished: waiting for unit sshd.service, in 13.43 seconds)884buildbot: waiting for unit setup-git-repo.service885buildbot # [ 12.715259] postgresql-pre-start[601]: selecting default "max_connections" ... 100886buildbot # [ 12.807297] setup-git-repo-start[644]: [master (root-commit) 26b6a8e] Initial commit887buildbot # [ 12.811852] setup-git-repo-start[644]: 1 file changed, 39 insertions(+)888buildbot # [ 12.818439] setup-git-repo-start[644]: create mode 100644 flake.nix889buildbot # [ 12.899570] postgresql-pre-start[601]: selecting default "shared_buffers" ... 128MB890buildbot # [ 12.961888] setup-git-repo-start[652]: To /srv/repos/test-flake.git891buildbot # [ 12.962835] setup-git-repo-start[652]: * [new branch] master -> master892buildbot # [ 12.967637] setup-git-repo-start[652]: branch 'master' set up to track 'origin/master'.893buildbot # [ 13.241060] setup-git-repo-start[663]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 274 ms (attempt 1/5)894buildbot # [ 13.515668] setup-git-repo-start[663]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 676 ms (attempt 2/5)895buildbot # [ 14.023938] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3896buildbot # [ 14.122299] dhcpcd[552]: eth0: soliciting a DHCP lease897buildbot # [ 14.128421] dhcpcd[552]: eth0: offered 10.0.2.15 from 10.0.2.2898buildbot # [ 14.136241] dhcpcd[552]: eth0: probing address 10.0.2.15/24899buildbot # [ 14.195265] setup-git-repo-start[663]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 1296 ms (attempt 3/5)900buildbot # [ 14.523999] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.901buildbot # [ 14.539481] systemd[1]: Starting Virtual Console Setup...902buildbot # [ 14.574225] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.903buildbot # [ 14.579471] systemd[1]: Stopped Virtual Console Setup.904buildbot # [ 14.590770] systemd[1]: Starting Virtual Console Setup...905buildbot # [ 14.644159] dhcpcd[552]: eth0: soliciting an IPv6 router906buildbot # [ 14.647788] dhcpcd[552]: eth0: Router Advertisement from fe80::2907buildbot # [ 14.651627] dhcpcd[552]: eth0: adding address fec0::5054:ff:fe12:3456/64908buildbot # [ 14.655486] systemd-logind[416]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)909buildbot # [ 14.658540] dhcpcd[552]: eth0: adding route to fec0::/64910buildbot # [ 14.659435] dhcpcd[552]: eth0: adding default route via fe80::2911buildbot # [ 15.127008] systemd-vconsole-setup[679]: Configuration of first virtual console was skipped, ignoring remaining ones.912buildbot # [ 15.132874] systemd[1]: Finished Virtual Console Setup.913buildbot # [ 15.492980] setup-git-repo-start[663]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org; retrying in 2637 ms (attempt 4/5)914buildbot # [ 15.629993] postgresql-pre-start[601]: selecting default time zone ... UTC915buildbot # [ 15.634168] postgresql-pre-start[601]: creating configuration files ... ok916buildbot # [ 16.018283] postgresql-pre-start[601]: running bootstrap script ... ok917buildbot # [ 16.751965] postgresql-pre-start[601]: performing post-bootstrap initialization ... ok918buildbot # [ 16.911940] postgresql-pre-start[601]: syncing data to disk ... ok919buildbot # [ 16.913197] postgresql-pre-start[601]: initdb: warning: enabling "trust" authentication for local connections920buildbot # [ 16.915883] postgresql-pre-start[601]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.921buildbot # [ 16.918313] postgresql-pre-start[601]: Success. You can now start the database server using:922buildbot # [ 16.919538] postgresql-pre-start[601]: pg_ctl -D /var/lib/postgresql/18 -l logfile start923buildbot # [ 17.104913] postgres[702]: [702] LOG: starting PostgreSQL 18.6 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit924buildbot # [ 17.116853] postgres[702]: [702] LOG: listening on IPv6 address "::1", port 5432925buildbot # [ 17.118082] postgres[702]: [702] LOG: listening on IPv4 address "127.0.0.1", port 5432926buildbot # [ 17.120843] postgres[702]: [702] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"927buildbot # [ 17.135676] postgres[715]: [715] LOG: database system was shut down at 2026-09-06 07:07:14 GMT928buildbot # [ 17.141368] postgres[702]: [702] LOG: database system is ready to accept connections929buildbot # [ 17.148465] systemd[1]: Started PostgreSQL Server.930buildbot # [ 17.152470] systemd[1]: Starting PostgreSQL Setup Scripts...931buildbot # [ 17.418543] postgresql-setup-start[726]: CREATE DATABASE932buildbot # [ 17.474489] postgresql-setup-start[731]: CREATE ROLE933buildbot # [ 17.501901] postgresql-setup-start[733]: ALTER DATABASE934buildbot # [ 17.509107] systemd[1]: Finished PostgreSQL Setup Scripts.935buildbot # [ 17.511209] systemd[1]: Reached target PostgreSQL.936buildbot # [ 17.516114] systemd[1]: Starting Buildbot Continuous Integration Server....937buildbot # [ 17.580576] buildbot-master-pre-start[738]: mkdir: created directory '/var/lib/buildbot/master'938buildbot # [ 18.134135] setup-git-repo-start[663]: warning: unable to download 'https://cache.nixos.org/nix-cache-info': Could not resolve hostname (6) Could not resolve host: cache.nixos.org939buildbot # [ 18.139267] setup-git-repo-start[663]: this derivation will be built:940buildbot # [ 18.143102] setup-git-repo-start[663]: /nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv941buildbot # [ 18.301323] setup-git-repo-start[663]: building '/nix/store/lqx3p33b67znqs9dzp4mdp81b11fiwzz-skippable-test.drv'...942buildbot # [ 18.341493] systemd[1]: Finished Setup git test repository.943buildbot # [ 18.825619] dhcpcd[552]: eth0: leased 10.0.2.15 for 86400 seconds944buildbot # [ 18.827108] dhcpcd[552]: eth0: adding route to 10.0.2.0/24945buildbot # [ 18.828264] dhcpcd[552]: eth0: adding default route via 10.0.2.2946buildbot # [ 19.001442] systemd[1]: Started DHCP Client.947buildbot: (finished: waiting for unit setup-git-repo.service, in 6.60 seconds)948buildbot: waiting for unit multi-user.target949buildbot # [ 23.483307] buildbot-master-pre-start[740]: updating existing installation950buildbot # [ 23.483438] buildbot-master-pre-start[740]: not touching existing buildbot.tac951buildbot # [ 23.483475] buildbot-master-pre-start[740]: creating buildbot.tac.new instead952buildbot # [ 23.483507] buildbot-master-pre-start[740]: creating /var/lib/buildbot/master/master.cfg.sample953buildbot # [ 23.483541] buildbot-master-pre-start[740]: creating database (postgresql://@/buildbot)954buildbot # [ 23.483601] buildbot-master-pre-start[740]: buildmaster configured in /var/lib/buildbot/master955buildbot # [ 23.940899] systemd[1]: Started Buildbot Continuous Integration Server..956buildbot # [ 23.950479] systemd[1]: Started Buildbot Worker..957buildbot # [ 23.953019] systemd[1]: Reached target Multi-User System.958buildbot # [ 23.954531] systemd[1]: Startup finished in 968ms (kernel) + 5.450s (initrd) + 17.532s (userspace) = 23.951s.959buildbot: (finished: waiting for unit multi-user.target, in 5.66 seconds)960subtest: Master and worker services start961buildbot: waiting for unit buildbot-master.service962buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds)963buildbot: waiting for unit buildbot-worker.service964buildbot: (finished: waiting for unit buildbot-worker.service, in 0.10 seconds)965buildbot: waiting for TCP port 8010 on localhost966buildbot # [ 25.788156] twistd[866]: Starting worker local-worker-000967buildbot # [ 25.788330] twistd[866]: 2026-09-06T07:07:22+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...968buildbot # [ 25.792110] twistd[866]: 2026-09-06T07:07:23+0000 [-] Loaded.969buildbot # [ 25.792926] twistd[866]: 2026-09-06T07:07:23+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin/python3.14 3.14.7) starting up.970buildbot # [ 25.795174] twistd[866]: 2026-09-06T07:07:23+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.971buildbot # [ 25.798093] twistd[866]: 2026-09-06T07:07:23+0000 [-] Starting Worker -- version: 2026.09.06972buildbot # [ 25.799589] twistd[866]: 2026-09-06T07:07:23+0000 [-] recording hostname in twistd.hostname973buildbot # [ 25.802703] twistd[866]: 2026-09-06T07:07:23+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf2cfa72c0050>974buildbot # [ 25.809669] twistd[866]: 2026-09-06T07:07:23+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xf2cfa72c0590> in 1.752288864894487 seconds.975buildbot # [ 25.813485] twistd[866]: 2026-09-06T07:07:23+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xf2cfa72c0050>976buildbot # [ 27.568872] twistd[866]: 2026-09-06T07:07:25+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf2cfa72c0050>977buildbot # [ 27.572544] twistd[866]: 2026-09-06T07:07:25+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xf2cfa72c0590> in 3.1554561324936925 seconds.978buildbot # [ 27.576681] twistd[866]: 2026-09-06T07:07:25+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xf2cfa72c0050>979buildbot # [ 27.688384] twistd[865]: 2026-09-06T07:07:22+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...980buildbot # [ 27.690371] twistd[865]: 2026-09-06T07:07:25+0000 [-] Loaded.981buildbot # [ 27.691340] twistd[865]: 2026-09-06T07:07:25+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin/python3.14 3.14.7) starting up.982buildbot # [ 27.694080] twistd[865]: 2026-09-06T07:07:25+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.983buildbot # [ 27.695967] twistd[865]: 2026-09-06T07:07:25+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0984buildbot # [ 27.706000] twistd[865]: 2026-09-06T07:07:25+0000 [-] Loading configuration from '/nix/store/l2cqh5pjwgyx40nf93x3b2772p2nwpf9-master.cfg'985buildbot # [ 28.585313] twistd[865]: 2026-09-06T07:07:26+0000 [-] Setting up database with URL 'postgresql://@/buildbot'986buildbot # [ 28.724459] twistd[865]: 2026-09-06T07:07:26+0000 [-] adding 9 new builders, removing 0987buildbot # [ 28.954058] twistd[865]: 2026-09-06T07:07:26+0000 [-] adding 3 new services, removing 0988buildbot # [ 29.157362] twistd[865]: 2026-09-06T07:07:26+0000 [-] adding 1 new change_sources, removing 0989buildbot # [ 29.163445] twistd[865]: 2026-09-06T07:07:26+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'990buildbot # [ 29.172067] twistd[865]: 2026-09-06T07:07:26+0000 [-] adding 14 new schedulers, removing 0991buildbot # [ 29.385100] twistd[865]: 2026-09-06T07:07:27+0000 [-] BuildbotSite starting on 8010992buildbot # [ 29.386228] twistd[865]: 2026-09-06T07:07:27+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0xf79054d5cd70>993buildbot # [ 29.389549] twistd[865]: 2026-09-06T07:07:27+0000 [-] adding 5 new workers, removing 0994buildbot # [ 29.399775] twistd[865]: 2026-09-06T07:07:27+0000 [-] PBServerFactory starting on 9989995buildbot # [ 29.402338] twistd[865]: 2026-09-06T07:07:27+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0xf79054d5d7f0>996buildbot # [ 29.449972] twistd[865]: 2026-09-06T07:07:27+0000 [-] Starting Worker -- version: 2026.09.06997buildbot # [ 29.451827] twistd[865]: 2026-09-06T07:07:27+0000 [-] recording hostname in twistd.hostname998buildbot # [ 29.453425] twistd[865]: 2026-09-06T07:07:27+0000 [-] message from master: attached999buildbot # [ 29.455394] twistd[865]: 2026-09-06T07:07:27+0000 [-] Got workerinfo from '__Janitor'1000buildbot # [ 29.465419] twistd[865]: 2026-09-06T07:07:27+0000 [-] bot attached1001buildbot # [ 29.466324] twistd[865]: 2026-09-06T07:07:27+0000 [-] Worker __Janitor attached to __Janitor1002buildbot # [ 29.467390] twistd[865]: 2026-09-06T07:07:27+0000 [-] message from master: attached1003buildbot # [ 29.500358] twistd[865]: 2026-09-06T07:07:27+0000 [-] BuildMaster is running1004buildbot # [ 29.513376] sshd-session[926]: Accepted publickey for root from ::1 port 47202 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81005buildbot # [ 29.526310] sshd-session[926]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1006buildbot # [ 29.571392] systemd[1]: Created slice Slice /user/0.1007buildbot # [ 29.576267] systemd[1]: Starting User Runtime Directory /run/user/0...1008buildbot # [ 29.612686] systemd-logind[416]: New session '1' of user 'root' with class 'user' and type 'tty'.1009buildbot # [ 29.624744] systemd[1]: Finished User Runtime Directory /run/user/0.1010buildbot # [ 29.630274] systemd[1]: Starting User Manager for UID 0...1011buildbot # [ 29.670089] (systemd)[936]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1012buildbot # [ 29.676316] systemd-logind[416]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1013buildbot # [ 29.774498] systemd[936]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1014buildbot # [ 30.008777] systemd[936]: Queued start job for default target Main User Target.1015buildbot # [ 30.016925] systemd[936]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1016buildbot # [ 30.020664] systemd[936]: Created slice User Application Slice.1017buildbot # [ 30.021577] systemd[936]: Started Daily Cleanup of User's Temporary Directories.1018buildbot # [ 30.022552] systemd[936]: Reached target Paths.1019buildbot # [ 30.023180] systemd[936]: Reached target Timers.1020buildbot # [ 30.025423] systemd[936]: Starting D-Bus User Message Bus Socket...1021buildbot # [ 30.032804] systemd[936]: Starting Create User Files and Directories...1022buildbot # [ 30.123773] systemd[936]: Finished Create User Files and Directories.1023buildbot # [ 30.175673] systemd[936]: Listening on D-Bus User Message Bus Socket.1024buildbot # [ 30.179879] systemd[936]: Reached target Sockets.1025buildbot # [ 30.180677] systemd[936]: Reached target Basic System.1026buildbot # [ 30.181421] systemd[936]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1027buildbot # [ 30.182738] systemd[936]: Reached target Main User Target.1028buildbot # [ 30.183479] systemd[936]: Startup finished in 479ms.1029buildbot # [ 30.185754] systemd[1]: Started User Manager for UID 0.1030buildbot # [ 30.186512] systemd[1]: Started Session 1 of User root.1031buildbot # [ 30.221322] sshd-session[949]: Received disconnect from ::1 port 47202:11: disconnected by user1032buildbot # [ 30.223283] sshd-session[949]: Disconnected from user root ::1 port 472021033buildbot # [ 30.224529] sshd-session[926]: pam_unix(sshd:session): session closed for user root1034buildbot # [ 30.236626] systemd[1]: session-1.scope: Deactivated successfully.1035buildbot # [ 30.237543] systemd-logind[416]: Session 1 logged out. Waiting for processes to exit.1036buildbot # [ 30.244343] systemd-logind[416]: Removed session 1.1037buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1038buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.36 seconds)1039??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1040 File "/nix/store/ifid8v1phbdldw2n5l1p1v3an4s9p3q8-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391041buildbot: waiting for success: curl --fail --head http://localhost:80101042??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1043 File "/nix/store/ifid8v1phbdldw2n5l1p1v3an4s9p3q8-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391044buildbot # [ 30.438887] sshd-session[954]: Accepted publickey for root from ::1 port 47212 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81045buildbot # [ 30.456669] sshd-session[954]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1046buildbot # [ 30.467094] systemd-logind[416]: New session '3' of user 'root' with class 'user' and type 'tty'.1047buildbot # [ 30.474950] systemd[1]: Started Session 3 of User root.1048buildbot # [ 30.527706] sshd-session[965]: Received disconnect from ::1 port 47212:11: disconnected by user1049buildbot # [ 30.535440] sshd-session[965]: Disconnected from user root ::1 port 472121050buildbot # [ 30.542041] systemd[1]: session-3.scope: Deactivated successfully.1051buildbot # [ 30.543582] sshd-session[954]: pam_unix(sshd:session): session closed for user root1052buildbot # [ 30.546347] systemd-logind[416]: Session 3 logged out. Waiting for processes to exit.1053buildbot # [ 30.547436] systemd-logind[416]: Removed session 3.1054buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1055buildbot # Dload Upload Total Spent Left Speed1056buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01057buildbot # [ 30.600477] twistd[865]: 2026-09-06T07:07:28+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1058buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.18 seconds)1059(finished: subtest: Master and worker services start, in 5.72 seconds)1060buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1061buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1062buildbot # Dload Upload Total Spent Left Speed1063buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 15989 0 0100 266 100 266 0 0 13937 0 0100 266 100 266 0 0 12142 0 01064buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.08 seconds)1065subtest: Wait for poller to initialize1066buildbot: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from"1067buildbot # [ 30.733971] twistd[866]: 2026-09-06T07:07:28+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xf2cfa72c0050>1068buildbot # [ 30.743184] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=56790)1069buildbot # [ 30.747597] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1070buildbot: (finished: waiting for success: journalctl -u buildbot-master.service | grep "gitpoller: processing changes from", in 0.06 seconds)1071(finished: subtest: Wait for poller to initialize, in 0.06 seconds)1072subtest: Push new commit to trigger poller1073buildbot: must succeed: 1074 cd /tmp/test-flake1075 echo '# Updated at test time' >> flake.nix1076 git add flake.nix1077 git commit -m 'Test commit to trigger poller'1078 git push origin master1079 1080buildbot # [ 30.755243] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1081buildbot # [ 30.773142] twistd[865]: 2026-09-06T07:07:28+0000 [-] bot attached1082buildbot # [ 30.779260] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1083buildbot # [ 30.783801] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1084buildbot # [ 30.789668] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1085buildbot # [ 30.807453] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1086buildbot # [ 30.825685] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1087buildbot # [ 30.827281] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1088buildbot # [ 30.877049] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1089buildbot # [ 30.878684] twistd[865]: 2026-09-06T07:07:28+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1090buildbot # [ 30.899128] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1091buildbot # [ 30.913119] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1092buildbot # [ 30.914283] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1093buildbot # [ 30.915396] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1094buildbot # [ 30.945110] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1095buildbot # [ 30.949594] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1096buildbot # [ 30.950765] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1097buildbot # [ 30.951887] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] message from master: attached1098buildbot # [ 30.964176] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] Connected to buildmaster; worker is ready1099buildbot # [ 30.965500] twistd[866]: 2026-09-06T07:07:28+0000 [Broker,client] sending application-level keepalives every 600 seconds1100buildbot # Enumerating objects: 5, done.1101buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1102buildbot # Compressing objects: 50% (1/2)Compressing objects: 100% (2/2)Compressing objects: 100% (2/2), done.1103buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 299 bytes | 149.00 KiB/s, done.1104buildbot # Total 3 (delta 1), reused 0 (delta 0), pack-reused 0 (from 0)1105buildbot # To /srv/repos/test-flake.git1106buildbot # 26b6a8e..3e972e8 master -> master1107buildbot: (finished: must succeed: 1108 cd /tmp/test-flake1109 echo '# Updated at test time' >> flake.nix1110 git add flake.nix1111 git commit -m 'Test commit to trigger poller'1112 git push origin master1113 , in 0.31 seconds)1114(finished: subtest: Push new commit to trigger poller, in 0.31 seconds)1115subtest: Poller triggers builds and verifies results1116??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1117 File "/nix/store/ifid8v1phbdldw2n5l1p1v3an4s9p3q8-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281118buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1119buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1120buildbot # Dload Upload Total Spent Left Speed1121buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3259 0 0100 51 100 51 0 0 2817 0 0100 51 100 51 0 0 2446 0 01122buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1123buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1124buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1125buildbot # Dload Upload Total Spent Left Speed1126buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4554 0 0100 51 100 51 0 0 3311 0 0100 51 100 51 0 0 2691 0 01127buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1128buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1129buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1130buildbot # Dload Upload Total Spent Left Speed1131buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2349 0 0100 51 100 51 0 0 1864 0 0100 51 100 51 0 0 1632 0 01132buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1133buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1134buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1135buildbot # Dload Upload Total Spent Left Speed1136buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2655 0 0100 51 100 51 0 0 2185 0 0100 51 100 51 0 0 1898 0 01137buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1138buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1139buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1140buildbot # Dload Upload Total Spent Left Speed1141buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3256 0 0100 51 100 51 0 0 2706 0 0100 51 100 51 0 0 2345 0 01142buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1143buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1144buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1145buildbot # Dload Upload Total Spent Left Speed1146buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4511 0 0100 51 100 51 0 0 3162 0 0100 51 100 51 0 0 2534 0 01147buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1148buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1149buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1150buildbot # Dload Upload Total Spent Left Speed1151buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2983 0 0100 51 100 51 0 0 2267 0 0100 51 100 51 0 0 1887 0 01152buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1153buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1154buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1155buildbot # Dload Upload Total Spent Left Speed1156buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 6331 0 0100 51 100 51 0 0 4694 0 0100 51 100 51 0 0 3779 0 01157buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1158buildbot # [ 39.441704] sshd-session[1039]: Accepted publickey for root from ::1 port 50394 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81159buildbot # [ 39.466436] sshd-session[1039]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1160buildbot # [ 39.484175] systemd-logind[416]: New session '4' of user 'root' with class 'user' and type 'tty'.1161buildbot # [ 39.488536] systemd[1]: Started Session 4 of User root.1162buildbot # [ 39.529205] sshd-session[1042]: Received disconnect from ::1 port 50394:11: disconnected by user1163buildbot # [ 39.531735] sshd-session[1042]: Disconnected from user root ::1 port 503941164buildbot # [ 39.536719] sshd-session[1039]: pam_unix(sshd:session): session closed for user root1165buildbot # [ 39.548197] systemd[1]: session-4.scope: Deactivated successfully.1166buildbot # [ 39.549556] systemd-logind[416]: Session 4 logged out. Waiting for processes to exit.1167buildbot # [ 39.559411] systemd-logind[416]: Removed session 4.1168buildbot # [ 39.762058] sshd-session[1047]: Accepted publickey for root from ::1 port 50398 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81169buildbot # [ 39.783182] sshd-session[1047]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1170buildbot # [ 39.799745] systemd-logind[416]: New session '5' of user 'root' with class 'user' and type 'tty'.1171buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1172buildbot # [ 39.805557] systemd[1]: Started Session 5 of User root.1173buildbot # [ 39.883787] sshd-session[1050]: Received disconnect from ::1 port 50398:11: disconnected by user1174buildbot # [ 39.890873] sshd-session[1050]: Disconnected from user root ::1 port 503981175buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1176buildbot # [ 39.904874] sshd-session[1047]: pam_unix(sshd:session): session closed for user root1177buildbot # [ 39.906267] systemd[1]: session-5.scope: Deactivated successfully.1178buildbot # [ 39.907408] systemd-logind[416]: Session 5 logged out. Waiting for processes to exit.1179buildbot # [ 39.912284] systemd-logind[416]: Removed session 5.1180buildbot # Dload Upload Total Spent Left Speed1181buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1260 0 0100 51 100 51 0 0 1036 0 [ 39.951685] twistd[865]: 2026-09-06T07:07:37+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1182buildbot # 0100 51 100 51 0 0 832 0 01183buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds)1184buildbot # [ 39.999286] twistd[865]: 2026-09-06T07:07:37+0000 [-] gitpoller: processing 1 changes: ['3e972e83104459fe5c77f56ab6d54906a843f0f5'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1185buildbot # [ 40.106480] twistd[865]: 2026-09-06T07:07:37+0000 [-] added change with revision 3e972e83104459fe5c77f56ab6d54906a843f0f5 to database1186buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1187buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1188buildbot # Dload Upload Total Spent Left Speed1189buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3880 0 0100 51 100 51 0 0 2957 0 0100 51 100 51 0 0 2424 0 01190buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1191buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1192buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1193buildbot # Dload Upload Total Spent Left Speed1194buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4367 0 0100 51 100 51 0 0 3615 0 0100 51 100 51 0 0 3089 0 01195buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1196buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1197buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1198buildbot # Dload Upload Total Spent Left Speed1199buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4254 0 0100 51 100 51 0 0 3081 0 0100 51 100 51 0 0 2449 0 01200buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1201buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1202buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1203buildbot # Dload Upload Total Spent Left Speed1204buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4641 0 0100 51 100 51 0 0 3234 0 0100 51 100 51 0 0 2578 0 01205buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1206buildbot # [ 45.170107] twistd[865]: 2026-09-06T07:07:42+0000 [-] added buildset 1 to database1207buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1208buildbot # [ 45.390176] twistd[865]: 2026-09-06T07:07:43+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1209buildbot # [ 45.400481] twistd[865]: 2026-09-06T07:07:43+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1210buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1211buildbot # Dload Upload Total Spent Left Speed1212buildbot # 0 0 0 0 0 0 0 0 0100 400 100 400 0 0 12685 0 0100 400 100 400 0 0 10685 0 0100 400 100 400 0 0 7891 0 01213buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.18 seconds)1214buildbot # [ 45.537768] twistd[865]: 2026-09-06T07:07:43+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1215buildbot # [ 45.543049] twistd[865]: 2026-09-06T07:07:43+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1216buildbot # [ 45.547454] twistd[865]: 2026-09-06T07:07:43+0000 [-] sending ping1217buildbot # [ 45.550480] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] message from master: ping1218buildbot # [ 45.551607] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] ping finished: success1219buildbot # [ 45.573973] twistd[865]: 2026-09-06T07:07:43+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1220buildbot # [ 45.575485] twistd[865]: 2026-09-06T07:07:43+0000 [-] command '['git', '--version']' in dir 'build'1221buildbot # [ 45.585269] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 0): startCommand:shell1222buildbot # [ 45.586510] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1223buildbot # [ 45.587900] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '--version']): git --version1224buildbot # [ 45.592325] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1225buildbot # [ 45.594640] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1226buildbot # [ 45.596135] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1227buildbot # [ 45.597869] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '--version']): using PTY: False1228buildbot # [ 45.610668] twistd[866]: 2026-09-06T07:07:43+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0299131229buildbot # [ 45.612541] twistd[866]: 2026-09-06T07:07:43+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa72c2510>1230buildbot # [ 45.633879] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01231buildbot # [ 45.672723] twistd[865]: 2026-09-06T07:07:43+0000 [-] <RemoteCommand 'stat' at 272199260490112>: RemoteCommand.run [1]1232buildbot # [ 45.681277] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 1): startCommand:stat1233buildbot # [ 45.682482] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1234buildbot # [ 45.688890] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xf2cfa79ffb60>1235buildbot # [ 45.691931] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 272199260490112> rc=21236buildbot # [ 45.700636] twistd[865]: 2026-09-06T07:07:43+0000 [-] <RemoteCommand 'mkdir' at 272199260616848>: RemoteCommand.run [2]1237buildbot # [ 45.729440] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 2): startCommand:mkdir1238buildbot # [ 45.731142] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0xf2cfa72c1010>1239buildbot # [ 45.736517] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 272199260616848> rc=01240buildbot # [ 45.741245] twistd[865]: 2026-09-06T07:07:43+0000 [-] <RemoteCommand 'downloadFile' at 272199260617808>: RemoteCommand.run [3]1241buildbot # [ 45.776990] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 3): startCommand:downloadFile1242buildbot # [ 45.782923] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0xf2cfa72c0d70>1243buildbot # [ 45.790835] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 272199260617808> rc=01244buildbot # [ 45.798117] twistd[865]: 2026-09-06T07:07:43+0000 [-] <RemoteCommand 'listdir' at 272199260618128>: RemoteCommand.run [4]1245buildbot # [ 45.830585] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 4): startCommand:listdir1246buildbot # [ 45.836817] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xf2cfa72c0c20>1247buildbot # [ 45.845162] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 272199260618128> rc=01248buildbot # [ 45.855094] twistd[865]: 2026-09-06T07:07:43+0000 [-] No git repo present, making full clone1249buildbot # [ 45.858366] twistd[865]: 2026-09-06T07:07:43+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1250buildbot # [ 45.866457] twistd[865]: 2026-09-06T07:07:43+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1251buildbot # [ 45.877474] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command 5): startCommand:shell1252buildbot # [ 45.883450] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1253buildbot # [ 45.901554] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1254buildbot # [ 45.923458] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1255buildbot # [ 45.930817] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1256buildbot # [ 45.937257] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1257buildbot # [ 45.947608] twistd[866]: 2026-09-06T07:07:43+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1258buildbot # [ 46.157734] sshd-session[1089]: Accepted publickey for root from ::1 port 41524 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81259buildbot # [ 46.179794] sshd-session[1089]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1260buildbot # [ 46.192383] systemd-logind[416]: New session '6' of user 'root' with class 'user' and type 'tty'.1261buildbot # [ 46.206641] systemd[1]: Started Session 6 of User root.1262buildbot # [ 46.281892] sshd-session[1092]: Received disconnect from ::1 port 41524:11: disconnected by user1263buildbot # [ 46.285200] sshd-session[1092]: Disconnected from user root ::1 port 415241264buildbot # [ 46.287128] sshd-session[1089]: pam_unix(sshd:session): session closed for user root1265buildbot # [ 46.293810] systemd[1]: session-6.scope: Deactivated successfully.1266buildbot # [ 46.298234] systemd-logind[416]: Session 6 logged out. Waiting for processes to exit.1267buildbot # [ 46.301833] systemd-logind[416]: Removed session 6.1268buildbot # [ 46.318623] twistd[866]: 2026-09-06T07:07:43+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.4372891269buildbot # [ 46.329830] twistd[866]: 2026-09-06T07:07:43+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa79596d0>1270buildbot # [ 46.332966] twistd[865]: 2026-09-06T07:07:43+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01271buildbot # [ 46.355612] twistd[865]: 2026-09-06T07:07:44+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']'>: RemoteCommand.run [6]1272buildbot # [ 46.359348] twistd[865]: 2026-09-06T07:07:44+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']' in dir 'build'1273buildbot # [ 46.369059] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command 6): startCommand:shell1274buildbot # [ 46.373303] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): RunProcess._startCommand1275buildbot # [ 46.381880] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 3e972e83104459fe5c77f56ab6d54906a843f0f51276buildbot # [ 46.387719] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1277buildbot # [ 46.394563] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): watching logfiles {}1278buildbot # [ 46.398529] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'3e972e83104459fe5c77f56ab6d54906a843f0f5']1279buildbot # [ 46.404516] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): using PTY: False1280buildbot # [ 46.419729] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']): command finished with signal None, exit code 0, elapsedTime: 0.0472341281buildbot # [ 46.423777] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa795a990>1282buildbot # [ 46.430013] twistd[865]: 2026-09-06T07:07:44+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '3e972e83104459fe5c77f56ab6d54906a843f0f5']'> rc=01283buildbot # [ 46.451290] twistd[865]: 2026-09-06T07:07:44+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1284buildbot # [ 46.455605] twistd[865]: 2026-09-06T07:07:44+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1285buildbot # [ 46.468999] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command 7): startCommand:shell1286buildbot # [ 46.472461] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1287buildbot # [ 46.475748] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1288buildbot # [ 46.486193] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1289buildbot # [ 46.492783] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1290buildbot # [ 46.496251] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1291buildbot # [ 46.501649] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1292buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1293buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1294buildbot # Dload Upload Total Spent Left Speed1295buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15539 0 0100 401 100 401 0 0 14135 0 0100 401 100 401 0 0 10152 0 01296buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1297buildbot # [ 46.665798] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1931301298buildbot # [ 46.673803] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa78ca780>1299buildbot # [ 46.677160] twistd[865]: 2026-09-06T07:07:44+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01300buildbot # [ 46.693976] twistd[865]: 2026-09-06T07:07:44+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1301buildbot # [ 46.695600] twistd[865]: 2026-09-06T07:07:44+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1302buildbot # [ 46.713088] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command 8): startCommand:shell1303buildbot # [ 46.716763] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1304buildbot # [ 46.718364] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1305buildbot # [ 46.719801] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1306buildbot # [ 46.727692] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1307buildbot # [ 46.729688] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1308buildbot # [ 46.733440] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1309buildbot # [ 46.742291] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0259331310buildbot # [ 46.744295] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa78ca8b0>1311buildbot # [ 46.769914] twistd[865]: 2026-09-06T07:07:44+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01312buildbot # [ 46.796709] twistd[865]: 2026-09-06T07:07:44+0000 [-] Got Git revision 3e972e83104459fe5c77f56ab6d54906a843f0f51313buildbot # [ 46.798205] twistd[865]: 2026-09-06T07:07:44+0000 [-] <RemoteCommand 'rmdir' at 272199261225040>: RemoteCommand.run [9]1314buildbot # [ 46.819333] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command 9): startCommand:rmdir1315buildbot # [ 46.824123] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1316buildbot # [ 46.826585] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1317buildbot # [ 46.832257] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1318buildbot # [ 46.835424] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1319buildbot # [ 46.838449] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1320buildbot # [ 46.842445] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1321buildbot # [ 46.856097] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0371591322buildbot # [ 46.859016] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0xf2cfa72c3380>1323buildbot # [ 46.873523] twistd[865]: 2026-09-06T07:07:44+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 272199261225040> rc=01324buildbot # [ 46.896463] twistd[865]: 2026-09-06T07:07:44+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1325buildbot # [ 46.919438] twistd[865]: 2026-09-06T07:07:44+0000 [-] step 'git' complete: success (None)1326buildbot # [ 46.928518] twistd[865]: 2026-09-06T07:07:44+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xf79056aad940>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xf79056aaecf0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xf79056aaecf0>)])1327buildbot # [ 46.950201] twistd[865]: 2026-09-06T07:07:44+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1328buildbot # [ 46.957975] twistd[865]: 2026-09-06T07:07:44+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1329buildbot # [ 46.959774] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command 10): startCommand:shell1330buildbot # [ 46.961464] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1331buildbot # [ 46.963676] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1332buildbot # [ 46.966535] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1333buildbot # [ 46.969543] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1334buildbot # [ 46.971804] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1335buildbot # [ 46.974965] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1336buildbot # [ 46.990661] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0410651337buildbot # [ 46.993179] twistd[866]: 2026-09-06T07:07:44+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa78eee70>1338buildbot # [ 47.001703] twistd[865]: 2026-09-06T07:07:44+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01339buildbot # [ 47.006303] twistd[865]: 2026-09-06T07:07:44+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1340buildbot # [ 47.011595] twistd[865]: 2026-09-06T07:07:44+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1341buildbot # [ 47.045332] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command 11): startCommand:shell1342buildbot # [ 47.049009] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1343buildbot # [ 47.060068] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1344buildbot # [ 47.067609] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1345buildbot # [ 47.073544] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1346buildbot # [ 47.078686] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1347buildbot # [ 47.087197] twistd[866]: 2026-09-06T07:07:44+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1348buildbot # [ 47.343797] systemd[1]: Started Nix Daemon.1349buildbot # [ 47.443374] nix-daemon[1135]: accepted connection from pid 1133, user buildbot-worker1350buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1351buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1352buildbot # Dload Upload Total Spent Left Speed1353buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15775 0 0100 401 100 401 0 0 13630 0 0100 401 100 401 0 0 12214 0 01354buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1355buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1356buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1357buildbot # Dload Upload Total Spent Left Speed1358buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 32971 0 0100 401 100 401 0 0 24391 0 0100 401 100 401 0 0 19721 0 01359buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1360buildbot # [ 49.443542] sshd-session[1152]: Accepted publickey for root from ::1 port 41536 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81361buildbot # [ 49.466279] sshd-session[1152]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1362buildbot # [ 49.483290] systemd-logind[416]: New session '7' of user 'root' with class 'user' and type 'tty'.1363buildbot # [ 49.489003] systemd[1]: Started Session 7 of User root.1364buildbot # [ 49.534495] sshd-session[1155]: Received disconnect from ::1 port 41536:11: disconnected by user1365buildbot # [ 49.537295] sshd-session[1155]: Disconnected from user root ::1 port 415361366buildbot # [ 49.541796] sshd-session[1152]: pam_unix(sshd:session): session closed for user root1367buildbot # [ 49.557312] systemd[1]: session-7.scope: Deactivated successfully.1368buildbot # [ 49.558559] systemd-logind[416]: Session 7 logged out. Waiting for processes to exit.1369buildbot # [ 49.561174] systemd-logind[416]: Removed session 7.1370buildbot # [ 49.770750] sshd-session[1160]: Accepted publickey for root from ::1 port 41542 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81371buildbot # [ 49.792160] sshd-session[1160]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1372buildbot # [ 49.805152] systemd-logind[416]: New session '8' of user 'root' with class 'user' and type 'tty'.1373buildbot # [ 49.817952] systemd[1]: Started Session 8 of User root.1374buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1375buildbot # [ 49.872574] sshd-session[1163]: Received disconnect from ::1 port 41542:11: disconnected by user1376buildbot # [ 49.874301] sshd-session[1163]: Disconnected from user root ::1 port 415421377buildbot # [ 49.878072] sshd-session[1160]: pam_unix(sshd:session): session closed for user root1378buildbot # [ 49.890865] systemd[1]: session-8.scope: Deactivated successfully.1379buildbot # [ 49.894358] systemd-logind[416]: Session 8 logged out. Waiting for processes to exit.1380buildbot # [ 49.896660] systemd-logind[416]: Removed session 8.1381buildbot # [ 49.910221] twistd[865]: 2026-09-06T07:07:47+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1382buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1383buildbot # Dload Upload Total Spent Left Speed1384buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 18439 0 0100 401 100 401 0 0 16330 0 0100 401 100 401 0 0 14874 0 01385buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1386buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1387buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1388buildbot # Dload Upload Total Spent Left Speed1389buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 32556 0 0100 401 100 401 0 0 24239 0 0100 401 100 401 0 0 19604 0 01390buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1391buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1392buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1393buildbot # Dload Upload Total Spent Left Speed1394buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 17892 0 0100 401 100 401 0 0 14651 0 0100 401 100 401 0 0 12368 0 01395buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.18 seconds)1396buildbot # [ 52.359350] nix-daemon[1135]: accepted connection from pid 1182, user buildbot-worker1397buildbot # [ 52.382252] nix-daemon[1135]: accepted connection from pid 1133, user buildbot-worker1398buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1399buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1400buildbot # Dload Upload Total Spent Left Speed1401buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 24909 0 0100 401 100 401 0 0 19190 0 0100 401 100 401 0 0 16491 0 01402buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1403buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1404buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1405buildbot # Dload Upload Total Spent Left Speed1406buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 27901 0 0100 401 100 401 0 0 21886 0 0100 401 100 401 0 0 18228 0 01407buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1408buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1409buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1410buildbot # Dload Upload Total Spent Left Speed1411buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 21913 0 0100 401 100 401 0 0 17838 0 0100 401 100 401 0 0 15408 0 01412buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1413buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1414buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1415buildbot # Dload Upload Total Spent Left Speed1416buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 28004 0 0100 401 100 401 0 0 20330 0 0100 401 100 401 0 0 16546 0 01417buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1418buildbot # [ 56.965302] twistd[866]: 2026-09-06T07:07:54+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 9.9098651419buildbot # [ 56.988314] twistd[866]: 2026-09-06T07:07:54+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa7a4b8a0>1420buildbot # [ 56.996167] twistd[865]: 2026-09-06T07:07:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01421buildbot # [ 57.044376] twistd[865]: 2026-09-06T07:07:54+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xf79056aad940>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xf79056aaecf0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xf79056aaecf0>)]1422buildbot # [ 57.075935] twistd[865]: 2026-09-06T07:07:54+0000 [-] step 'Evaluate flake' complete: success (None)1423buildbot # [ 57.122309] twistd[865]: 2026-09-06T07:07:54+0000 [-] added buildset 2 to database1424buildbot # [ 57.154856] twistd[865]: 2026-09-06T07:07:54+0000 [-] added buildset 3 to database1425buildbot # [ 57.314529] twistd[865]: 2026-09-06T07:07:54+0000 [-] starting build <Build test-flake/nix-build number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=AVAILABLE>1426buildbot # [ 57.327599] twistd[865]: 2026-09-06T07:07:54+0000 [-] <Build test-flake/nix-build number:None results:success>.startBuild1427buildbot # [ 57.414714] twistd[865]: 2026-09-06T07:07:55+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1428buildbot # [ 57.419262] twistd[865]: 2026-09-06T07:07:55+0000 [-] starting build <Build test-flake/nix-build number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=BUILDING>1429buildbot # [ 57.424219] twistd[865]: 2026-09-06T07:07:55+0000 [-] sending ping1430buildbot # [ 57.426013] twistd[865]: 2026-09-06T07:07:55+0000 [Broker,0,127.0.0.1] ping finished: success1431buildbot # [ 57.427234] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] message from master: ping1432buildbot # [ 57.448110] twistd[865]: 2026-09-06T07:07:55+0000 [-] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']'>: RemoteCommand.run [12]1433buildbot # [ 57.451766] twistd[865]: 2026-09-06T07:07:55+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']' in dir 'build'1434buildbot # [ 57.464410] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command 12): startCommand:shell1435buildbot # [ 57.465613] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): RunProcess._startCommand1436buildbot # [ 57.470474] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.failing-test '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*'1437buildbot # [ 57.476551] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs)1438buildbot # [ 57.481208] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): watching logfiles {}1439buildbot # [ 57.485205] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.failing-test', b'/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']1440buildbot # [ 57.491659] twistd[866]: 2026-09-06T07:07:55+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): using PTY: False1441buildbot # [ 57.566677] nix-daemon[1135]: accepted connection from pid 1203, user buildbot-worker1442buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1443buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1444buildbot # Dload Upload Total Spent Left Speed1445buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 36022 0 0100 751 100 751 0 0 30700 0 0100 751 100 751 0 0 27101 0 01446buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1447buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1448buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1449buildbot # Dload Upload Total Spent Left Speed1450buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 40296 0 0100 751 100 751 0 0 33224 0 0100 751 100 751 0 0 28686 0 01451buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1452buildbot # [ 59.435653] sshd-session[1221]: Accepted publickey for root from ::1 port 47732 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81453buildbot # [ 59.459859] sshd-session[1221]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1454buildbot # [ 59.480657] systemd-logind[416]: New session '9' of user 'root' with class 'user' and type 'tty'.1455buildbot # [ 59.485942] systemd[1]: Started Session 9 of User root.1456buildbot # [ 59.532542] sshd-session[1224]: Received disconnect from ::1 port 47732:11: disconnected by user1457buildbot # [ 59.538082] sshd-session[1224]: Disconnected from user root ::1 port 477321458buildbot # [ 59.547306] sshd-session[1221]: pam_unix(sshd:session): session closed for user root1459buildbot # [ 59.549138] systemd[1]: session-9.scope: Deactivated successfully.1460buildbot # [ 59.553663] systemd-logind[416]: Session 9 logged out. Waiting for processes to exit.1461buildbot # [ 59.560169] systemd-logind[416]: Removed session 9.1462buildbot # [ 59.769609] sshd-session[1229]: Accepted publickey for root from ::1 port 47748 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81463buildbot # [ 59.792834] sshd-session[1229]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1464buildbot # [ 59.808748] systemd-logind[416]: New session '10' of user 'root' with class 'user' and type 'tty'.1465buildbot # [ 59.815910] systemd[1]: Started Session 10 of User root.1466buildbot # [ 59.866005] sshd-session[1232]: Received disconnect from ::1 port 47748:11: disconnected by user1467buildbot # [ 59.868734] sshd-session[1232]: Disconnected from user root ::1 port 477481468buildbot # [ 59.871182] sshd-session[1229]: pam_unix(sshd:session): session closed for user root1469buildbot # [ 59.876242] systemd[1]: session-10.scope: Deactivated successfully.1470buildbot # [ 59.881848] systemd-logind[416]: Session 10 logged out. Waiting for processes to exit.1471buildbot # [ 59.885944] systemd-logind[416]: Removed session 10.1472buildbot # [ 59.893909] twistd[865]: 2026-09-06T07:07:57+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1473buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1474buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1475buildbot # Dload Upload Total Spent Left Speed1476buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 56717 0 0100 751 100 751 0 0 47426 0 0100 751 100 751 0 0 41134 0 01477buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1478buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1479buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1480buildbot # Dload Upload Total Spent Left Speed1481buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 59674 0 0100 751 100 751 0 0 44959 0 0100 751 100 751 0 0 36671 0 01482buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1483buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1484buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1485buildbot # Dload Upload Total Spent Left Speed1486buildbot # 0 0 0 0 0 0 0 0 0100 751 100 751 0 0 26197 0 0100 751 100 751 0 0 18916 0 0100 751 100 751 0 0 14355 0 01487buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1488buildbot # [ 62.371215] twistd[866]: 2026-09-06T07:08:00+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']): command finished with signal None, exit code 1, elapsedTime: 4.9130311489buildbot # [ 62.380339] twistd[866]: 2026-09-06T07:08:00+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa7a4bf00>1490buildbot # [ 62.382810] twistd[865]: 2026-09-06T07:08:00+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.failing-test', '/nix/store/1rz7z5l65lpcjdjcl22xwd06g4b3wywz-failing-test.drv^*']'> rc=11491buildbot # [ 62.419403] twistd[865]: 2026-09-06T07:08:00+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): []1492buildbot # [ 62.439307] twistd[865]: 2026-09-06T07:08:00+0000 [-] step 'Build flake attr' complete: failure (["'nix build ...' (failure)"])1493buildbot # [ 62.442707] twistd[865]: 2026-09-06T07:08:00+0000 [-] <Build test-flake/nix-build number:1 results:failure>: build finished1494buildbot # [ 62.454155] twistd[865]: 2026-09-06T07:08:00+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1495buildbot # [ 62.605023] twistd[865]: 2026-09-06T07:08:00+0000 [-] starting build <Build test-flake/nix-build number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=AVAILABLE>1496buildbot # [ 62.615254] twistd[865]: 2026-09-06T07:08:00+0000 [-] <Build test-flake/nix-build number:None results:success>.startBuild1497buildbot # [ 62.719115] twistd[865]: 2026-09-06T07:08:00+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1498buildbot # [ 62.723897] twistd[865]: 2026-09-06T07:08:00+0000 [-] starting build <Build test-flake/nix-build number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-build' worker='local-worker-000' state=BUILDING>1499buildbot # [ 62.728190] twistd[865]: 2026-09-06T07:08:00+0000 [-] sending ping1500buildbot # [ 62.729065] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] message from master: ping1501buildbot # [ 62.730173] twistd[865]: 2026-09-06T07:08:00+0000 [Broker,0,127.0.0.1] ping finished: success1502buildbot # [ 62.755518] twistd[865]: 2026-09-06T07:08:00+0000 [-] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']'>: RemoteCommand.run [13]1503buildbot # [ 62.765525] twistd[865]: 2026-09-06T07:08:00+0000 [-] command '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']' in dir 'build'1504buildbot # [ 62.774585] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command 13): startCommand:shell1505buildbot # [ 62.775897] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): RunProcess._startCommand1506buildbot # [ 62.780760] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): nix build -L --option keep-going true --max-silent-time 1200 --accept-flake-config --out-link result-aarch64-linux.test '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*'1507buildbot # [ 62.786093] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 10800 secs)1508buildbot # [ 62.790754] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): watching logfiles {}1509buildbot # [ 62.797347] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): argv: [b'nix', b'build', b'-L', b'--option', b'keep-going', b'true', b'--max-silent-time', b'1200', b'--accept-flake-config', b'--out-link', b'result-aarch64-linux.test', b'/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']1510buildbot # [ 62.803685] twistd[866]: 2026-09-06T07:08:00+0000 [Broker,client] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): using PTY: False1511buildbot # [ 62.877509] nix-daemon[1135]: accepted connection from pid 1261, user buildbot-worker1512buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1513buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1514buildbot # Dload Upload Total Spent Left Speed1515buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 51470 0 0100 1120 100 1120 0 0 43678 0 0100 1120 100 1120 0 0 38386 0 01516buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1517buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1518buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1519buildbot # Dload Upload Total Spent Left Speed1520buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 59372 0 0100 1120 100 1120 0 0 49330 0 0100 1120 100 1120 0 0 42235 0 01521buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1522buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1523buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1524buildbot # Dload Upload Total Spent Left Speed1525buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 87500 0 0100 1120 100 1120 0 0 66033 0 0100 1120 100 1120 0 0 53872 0 01526buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1527buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1528buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1529buildbot # Dload Upload Total Spent Left Speed1530buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 62692 0 0100 1120 100 1120 0 0 48752 0 0100 1120 100 1120 0 0 40785 0 01531buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1532buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1533buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1534buildbot # Dload Upload Total Spent Left Speed1535buildbot # 0 0 0 0 0 0 0 0 0100 1120 100 1120 0 0 64010 0 0100 1120 100 1120 0 0 46229 0 0100 1120 100 1120 0 0 41898 0 01536buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1537buildbot # [ 67.907130] twistd[866]: 2026-09-06T07:08:05+0000 [-] (command ['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']): command finished with signal None, exit code 0, elapsedTime: 5.1431721538buildbot # [ 67.915888] twistd[866]: 2026-09-06T07:08:05+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa78fb950>1539buildbot # [ 67.920334] twistd[865]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', 'result-aarch64-linux.test', '/nix/store/aphv0x43ggg93wqzz8pr7f6kypv8y3sa-test.drv^*']'> rc=01540buildbot # [ 67.943093] twistd[865]: 2026-09-06T07:08:05+0000 [-] releaseLocks(NixBuildCommand(name='Build flake attr', command=['nix', 'build', '-L', '--option', 'keep-going', 'true', '--max-silent-time', '1200', '--accept-flake-config', '--out-link', Interpolate('result-%(prop:attr)s'), Interpolate('%(prop:drv_path)s^*')], timeout=10800, haltOnFailure=True, logEnviron=False)): []1541buildbot # [ 67.960296] twistd[865]: 2026-09-06T07:08:05+0000 [-] step 'Build flake attr' complete: success (None)1542buildbot # [ 67.989698] twistd[865]: 2026-09-06T07:08:05+0000 [-] added buildset 4 to database1543buildbot # [ 68.139142] twistd[865]: 2026-09-06T07:08:05+0000 [-] starting build <Build test-flake/nix-register-gcroot number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-register-gcroot' worker='local-worker-000' state=AVAILABLE>1544buildbot # [ 68.147707] twistd[865]: 2026-09-06T07:08:05+0000 [-] <Build test-flake/nix-register-gcroot number:None results:success>.startBuild1545buildbot # [ 68.211045] twistd[865]: 2026-09-06T07:08:05+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1546buildbot # [ 68.217100] twistd[865]: 2026-09-06T07:08:05+0000 [-] starting build <Build test-flake/nix-register-gcroot number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-register-gcroot' worker='local-worker-000' state=BUILDING>1547buildbot # [ 68.221416] twistd[865]: 2026-09-06T07:08:05+0000 [-] sending ping1548buildbot # [ 68.224836] twistd[865]: 2026-09-06T07:08:05+0000 [Broker,0,127.0.0.1] ping finished: success1549buildbot # [ 68.226115] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] message from master: ping1550buildbot # [ 68.249065] twistd[865]: 2026-09-06T07:08:05+0000 [-] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']'>: RemoteCommand.run [14]1551buildbot # [ 68.256689] twistd[865]: 2026-09-06T07:08:05+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']' in dir 'build'1552buildbot # [ 68.259547] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command 14): startCommand:shell1553buildbot # [ 68.263178] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): RunProcess._startCommand1554buildbot # [ 68.266664] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test -r /nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test1555buildbot # [ 68.272551] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-register-gcroot/build (timeout 1200 secs)1556buildbot # [ 68.276639] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): watching logfiles {}1557buildbot # [ 68.279702] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', b'-r', b'/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']1558buildbot # [ 68.284756] twistd[866]: 2026-09-06T07:08:05+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): using PTY: False1559buildbot # [ 68.355049] nix-daemon[1135]: accepted connection from pid 1292, user buildbot-worker1560buildbot # [ 68.374912] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']): command finished with signal None, exit code 0, elapsedTime: 0.1280631561buildbot # [ 68.384316] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa78fba50>1562buildbot # [ 68.391042] twistd[865]: 2026-09-06T07:08:06+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.test', '-r', '/nix/store/4s73dg6jd7g31ryhgw4jiz4l9kji4g0b-test']'> rc=01563buildbot # [ 68.419215] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(ShellCommand(name='Register gcroot', command=['nix-store', '--add-root', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/%(prop:attr)s'), '-r', Property(out_path)], logEnviron=False)): []1564buildbot # [ 68.433074] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Register gcroot' complete: success (None)1565buildbot # [ 68.435357] twistd[865]: 2026-09-06T07:08:06+0000 [-] <Build test-flake/nix-register-gcroot number:1 results:success>: build finished1566buildbot # [ 68.443345] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1567buildbot # [ 68.590080] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(Trigger(name='Register gcroot', waitForFinish=True, schedulerNames=['test-flake-nix-register-gcroot'], haltOnFailure=True, flunkOnFailure=True, sourceStamps=[], alwaysUseLatest=False, updateSourceStamp=False, doStepIf=<function nix_build_steps.<locals>.<lambda> at 0xf79056b27e20>, copy_properties=['out_path', 'attr'], set_properties={'report_status': False})): []1568buildbot # [ 68.601025] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Register gcroot' complete: success (None)1569buildbot # [ 68.617462] twistd[865]: 2026-09-06T07:08:06+0000 [-] <RemoteShellCommand '['rm', '-f', 'result-aarch64-linux.test']'>: RemoteCommand.run [15]1570buildbot # [ 68.619174] twistd[865]: 2026-09-06T07:08:06+0000 [-] command '['rm', '-f', 'result-aarch64-linux.test']' in dir 'build'1571buildbot # [ 68.626764] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command 15): startCommand:shell1572buildbot # [ 68.628326] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): RunProcess._startCommand1573buildbot # [ 68.630129] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): rm -f result-aarch64-linux.test1574buildbot # [ 68.632190] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-build/build (timeout 1200 secs)1575buildbot # [ 68.634646] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): watching logfiles {}1576buildbot # [ 68.638824] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): argv: [b'rm', b'-f', b'result-aarch64-linux.test']1577buildbot # [ 68.640864] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-f', 'result-aarch64-linux.test']): using PTY: False1578buildbot # [ 68.647883] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command ['rm', '-f', 'result-aarch64-linux.test']): command finished with signal None, exit code 0, elapsedTime: 0.0313731579buildbot # [ 68.650058] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command 15): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa7300050>1580buildbot # [ 68.669778] twistd[865]: 2026-09-06T07:08:06+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-f', 'result-aarch64-linux.test']'> rc=01581buildbot # [ 68.692634] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(ShellCommand(name='Delete temporary gcroots', command=['rm', '-f', Interpolate('result-%(prop:attr)s')], logEnviron=False)): []1582buildbot # [ 68.702087] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Delete temporary gcroots' complete: success (None)1583buildbot # [ 68.717004] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(UpdateBuildOutput(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, name='Update build output', path=PosixPath('/var/lib/buildbot-outputs'), branch_config={})): []1584buildbot # [ 68.724905] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Update build output' complete: success (None)1585buildbot # [ 68.727277] twistd[865]: 2026-09-06T07:08:06+0000 [-] <Build test-flake/nix-build number:1 results:success>: build finished1586buildbot # [ 68.734878] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1587buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1588buildbot # [ 68.911383] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1589buildbot # [ 68.948822] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'build flake' complete: failure (['(1 success, 1 failure, 1 skipped)'])1590buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1591buildbot # Dload Upload Total Spent Left Speed1592buildbot # 0 0 0 0 0 0 0 0 0[ 68.977850] twistd[865]: 2026-09-06T07:08:06+0000 [-] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']'>: RemoteCommand.run [16]1593buildbot # 100 1514 100 1514 0 0 44784 0 [ 68.988136] twistd[865]: 2026-09-06T07:08:06+0000 [-] command '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']' in dir 'build'1594buildbot # [ 68.991302] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command 16): startCommand:shell1595buildbot # 0100 1514 100 1514 0 0 35126 [ 69.000214] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): RunProcess._startCommand1596buildbot # 0 0100 1514 100 1514 0 0 29117 0 01597buildbot # [ 69.007030] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): nix-store --add-root /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test -r /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test1598buildbot # [ 69.014498] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1599buildbot # [ 69.018914] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): watching logfiles {}1600buildbot # [ 69.022737] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): argv: [b'nix-store', b'--add-root', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', b'-r', b'/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']1601buildbot # [ 69.029066] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): using PTY: False1602buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.18 seconds)1603buildbot # [ 69.093640] nix-daemon[1135]: accepted connection from pid 1308, user buildbot-worker1604buildbot # [ 69.112091] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command ['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']): command finished with signal None, exit code 0, elapsedTime: 0.1352651605buildbot # [ 69.115528] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command 16): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa7300500>1606buildbot # [ 69.122255] twistd[865]: 2026-09-06T07:08:06+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-store', '--add-root', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/aarch64-linux.skippable-test', '-r', '/nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test']'> rc=01607buildbot # [ 69.150020] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=PosixPath('/var/lib/buildbot-outputs'), name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xf79056b27060>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xf79056b27110>)): []1608buildbot # [ 69.161854] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Process skipped builds' complete: success (None)1609buildbot # [ 69.176546] twistd[865]: 2026-09-06T07:08:06+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [17]1610buildbot # [ 69.187012] twistd[865]: 2026-09-06T07:08:06+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1611buildbot # [ 69.191994] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command 17): startCommand:shell1612buildbot # [ 69.194271] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1613buildbot # [ 69.198782] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1614buildbot # [ 69.202868] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1615buildbot # [ 69.207099] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1616buildbot # [ 69.209651] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1617buildbot # [ 69.213278] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1618buildbot # [ 69.220807] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0389801619buildbot # [ 69.224166] twistd[866]: 2026-09-06T07:08:06+0000 [-] (command 17): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa72c9630>1620buildbot # [ 69.229967] twistd[865]: 2026-09-06T07:08:06+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01621buildbot # [ 69.263460] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1622buildbot # [ 69.274780] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Cleanup drv paths' complete: success (None)1623buildbot # [ 69.292143] twistd[865]: 2026-09-06T07:08:06+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xf79056b275e0>, logEnviron=False)): []1624buildbot # [ 69.305576] twistd[865]: 2026-09-06T07:08:06+0000 [-] step 'Evaluate effects' complete: skipped (None)1625buildbot # [ 69.326512] twistd[865]: 2026-09-06T07:08:06+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [18]1626buildbot # [ 69.336561] twistd[865]: 2026-09-06T07:08:06+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1627buildbot # [ 69.338956] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command 18): startCommand:shell1628buildbot # [ 69.342556] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1629buildbot # [ 69.345999] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 3e972e83104459fe5c77f56ab6d54906a843f0f5 --branch master --repo test-flake1630buildbot # [ 69.350275] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1631buildbot # [ 69.354280] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1632buildbot # [ 69.357533] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'3e972e83104459fe5c77f56ab6d54906a843f0f5', b'--branch', b'master', b'--repo', b'test-flake']1633buildbot # [ 69.361913] twistd[866]: 2026-09-06T07:08:06+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1634buildbot # [ 69.464479] sshd-session[1317]: Accepted publickey for root from ::1 port 41784 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81635buildbot # [ 69.478013] sshd-session[1317]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1636buildbot # [ 69.489790] systemd-logind[416]: New session '11' of user 'root' with class 'user' and type 'tty'.1637buildbot # [ 69.498092] systemd[1]: Started Session 11 of User root.1638buildbot # [ 69.538411] sshd-session[1321]: Received disconnect from ::1 port 41784:11: disconnected by user1639buildbot # [ 69.540005] sshd-session[1321]: Disconnected from user root ::1 port 417841640buildbot # [ 69.542673] sshd-session[1317]: pam_unix(sshd:session): session closed for user root1641buildbot # [ 69.554102] systemd[1]: session-11.scope: Deactivated successfully.1642buildbot # [ 69.560215] systemd-logind[416]: Session 11 logged out. Waiting for processes to exit.1643buildbot # [ 69.562753] systemd-logind[416]: Removed session 11.1644buildbot # [ 69.777064] sshd-session[1326]: Accepted publickey for root from ::1 port 41796 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81645buildbot # [ 69.793464] sshd-session[1326]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1646buildbot # [ 69.810346] systemd-logind[416]: New session '12' of user 'root' with class 'user' and type 'tty'.1647buildbot # [ 69.813986] systemd[1]: Started Session 12 of User root.1648buildbot # [ 69.836538] nix-daemon[1135]: accepted connection from pid 1331, user buildbot-worker1649buildbot # [ 69.876472] sshd-session[1335]: Received disconnect from ::1 port 41796:11: disconnected by user1650buildbot # [ 69.880850] sshd-session[1335]: Disconnected from user root ::1 port 417961651buildbot # [ 69.889989] sshd-session[1326]: pam_unix(sshd:session): session closed for user root1652buildbot # [ 69.891063] systemd[1]: session-12.scope: Deactivated successfully.1653buildbot # [ 69.891909] systemd-logind[416]: Session 12 logged out. Waiting for processes to exit.1654buildbot # [ 69.894291] systemd-logind[416]: Removed session 12.1655buildbot # [ 69.904092] twistd[865]: 2026-09-06T07:08:07+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1656buildbot # [ 69.926322] twistd[866]: 2026-09-06T07:08:07+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.5943851657buildbot # [ 69.934496] twistd[866]: 2026-09-06T07:08:07+0000 [-] (command 18): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xf2cfa72c9a90>1658buildbot # [ 69.946795] twistd[865]: 2026-09-06T07:08:07+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '3e972e83104459fe5c77f56ab6d54906a843f0f5', '--branch', 'master', '--repo', 'test-flake']'> rc=01659buildbot # [ 70.001863] twistd[865]: 2026-09-06T07:08:07+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xf79056aac1a0>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xf79056b278a0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xf79056b27950>, logEnviron=False)): []1660buildbot # [ 70.017343] twistd[865]: 2026-09-06T07:08:07+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1661buildbot # [ 70.020056] twistd[865]: 2026-09-06T07:08:07+0000 [-] <Build test-flake/nix-eval number:1 results:failure>: build finished1662buildbot # [ 70.026966] twistd[865]: 2026-09-06T07:08:07+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1663buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1664buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1665buildbot # Dload Upload Total Spent Left Speed1666buildbot # 0 0 0 0 0 0 0 0 0100 1523 100 1523 0 0 78793 0 0100 1523 100 1523 0 0 69913 0 0100 1523 100 1523 0 0 63103 0 01667buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.18 seconds)1668buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties1669buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1670buildbot # Dload Upload Total Spent Left Speed1671buildbot # 0 0 0 0 0 0 0 0 0100 2172 100 2172 0 0 127.4k 0 0100 2172 100 2172 0 0 111.3k 0 0100 2172 100 2172 0 0 98.55k 0 01672buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/2/properties, in 0.07 seconds)1673buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties1674buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1675buildbot # Dload Upload Total Spent Left Speed1676buildbot # 0 0 0 0 0 0 0 0 0100 1548 100 1548 0 0 136.2k 0 0100 1548 100 1548 0 0 109.5k 0 0100 1548 100 1548 0 0 95869 0 01677buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/4/properties, in 0.06 seconds)1678buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties1679buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1680buildbot # Dload Upload Total Spent Left Speed1681buildbot # 0 0 0 0 0 0 0 0 0100 2132 100 2132 0 0 188.1k 0 0100 2132 100 2132 0 0 153.9k 0 0100 2132 100 2132 0 0 131.2k 0 01682buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/3/properties, in 0.06 seconds)1683buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties1684buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1685buildbot # Dload Upload Total Spent Left Speed1686buildbot # 0 0 0 0 0 0 0 0 0100 2489 100 2489 0 0 220.0k 0 0100 2489 100 2489 0 0 179.9k 0 0100 2489 100 2489 0 0 153.2k 0 01687buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds/1/properties, in 0.06 seconds)1688(finished: subtest: Poller triggers builds and verifies results, in 39.40 seconds)1689subtest: Verify output paths are written for skipped builds1690buildbot: must succeed: nix config show system1691buildbot: (finished: must succeed: nix config show system, in 0.09 seconds)1692buildbot: must succeed: 1693 nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath1694 1695buildbot: (finished: must succeed: 1696 nix eval --raw /tmp/test-flake#checks.aarch64-linux.skippable-test.outPath1697 , in 0.12 seconds)1698buildbot: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test1699buildbot: (finished: waiting for success: test -f /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.02 seconds)1700buildbot: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test1701buildbot: (finished: must succeed: cat /var/lib/buildbot-outputs/unknown/test-flake/master/aarch64-linux.skippable-test, in 0.03 seconds)1702(finished: subtest: Verify output paths are written for skipped builds, in 0.26 seconds)1703(finished: run the VM test script, in 71.52 seconds)1704test script finished in 71.57s1705cleanup1706kill QemuMachine (pid 45)1707buildbot # qemu-system-aarch64: terminating on signal 15 from pid 39 (/nix/store/lfh101cfjj8p8npcari9hk0lbqi33yvh-python3-3.14.7/bin/python3.14)1708(finished: cleanup, in 0.28 seconds)1709additionally exposed symbols:1710 buildbot,1711 vlan1,1712 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh1713Poller has started processing1714Pushed new commit to repository1715Expected output path for skippable-test: /nix/store/fv115ywyg5wphpv3wy4iln1r9dmsk42f-skippable-test