vm-test-run-scheduled-effects
checks.x86_64-linux.scheduled-effects
· build #62
· raw
1Machine state will be reset. To keep it, pass --keep-machine-state2start all VLans3(finished: start all VLans, in 0.00 seconds)4Test will time out and terminate in 3600.0 seconds5run the VM test script6additionally exposed symbols:7 buildbot,8 vlan1,9 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh10buildbot: waiting for unit sshd.service11buildbot: waiting for the VM to finish booting12buildbot: starting vm13buildbot # Disk image does not exist, creating the virtualisation disk image...14buildbot # Formatting '/build/vm-state-buildbot/tmp.E5bfhkkq5k', fmt=raw size=107374182415buildbot # mke2fs 1.47.4 (6-Mar-2025)16buildbot # Discarding device blocks: 0/262144 done17buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes18buildbot # Filesystem UUID: 64a3bce0-8860-4134-ba85-4b0a723890d919buildbot # Superblock backups stored on blocks:20buildbot # 32768, 98304, 163840, 22937621buildbot # 22buildbot # Allocating group tables: 0/8 done23buildbot # Writing inode tables: 0/8 done24buildbot # Creating journal (8192 blocks): done25buildbot # Writing superblocks and filesystem accounting information: 0/8 done26buildbot # 27buildbot # Virtualisation disk image created.28buildbot: QEMU running (pid 45)29buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)30buildbot # 31buildbot # 32buildbot # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA0033buildbot # Press Ctrl-B to configure iPXE (PCI 00:02.0)...34buildbot # 35buildbot # 36buildbot # 37buildbot # 38buildbot # iPXE (http://ipxe.org) 00:08.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB0039buildbot # Press Ctrl-B to configure iPXE (PCI 00:08.0)...40buildbot # 41buildbot # 42buildbot # Booting from ROM...43buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.49 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Wed Sep 2 12:31:51 UTC 202644buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/9xhbgzz5wpg9misgjddzackhxq9q0j8m-nixos-system-buildbot-test/init regInfo=/nix/store/b6s52ljz5j7ys18rx1nanl79k9qkyygl-closure-info/registration console=ttyS0,115200n8 console=tty045buildbot # [ 0.000000] x86 CPU feature dependency check failure: CPU0 has '18*32+31' enabled but '18*32+26' disabled. Kernel might be fine, but no guarantees.46buildbot # [ 0.000000] BIOS-provided physical RAM map:47buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable48buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable51buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved52buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved53buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved54buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved55buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved56buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved57buildbot # [ 0.000000] NX (Execute Disable) protection: active58buildbot # [ 0.000000] APIC: Static calls initialized59buildbot # [ 0.000000] SMBIOS 2.8 present.60buildbot # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201461buildbot # [ 0.000000] DMI: Memory slots populated: 1/162buildbot # [ 0.000000] Hypervisor detected: KVM63buildbot # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x40000000064buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0065buildbot # [ 0.000000] kvm-clock: using sched offset of 509588133 cycles66buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns67buildbot # [ 0.000006] tsc: Detected 3099.998 MHz processor68buildbot # [ 0.000766] last_pfn = 0x3ffd8 max_arch_pfn = 0x40000000069buildbot # [ 0.000794] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs70buildbot # [ 0.000797] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT71buildbot # [ 0.002945] found SMP MP-table at [mem 0x000f5450-0x000f545f]72buildbot # [ 0.002963] Using GB pages for direct mapping73buildbot # [ 0.003054] RAMDISK: [mem 0x3e36a000-0x3ffcffff]74buildbot # [ 0.003062] ACPI: Early table checksum verification disabled75buildbot # [ 0.003065] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )76buildbot # [ 0.003069] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.003074] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001)78buildbot # [ 0.003081] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001)79buildbot # [ 0.003083] ACPI: FACS 0x000000003FFE0000 00004080buildbot # [ 0.003085] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)81buildbot # [ 0.003087] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)82buildbot # [ 0.003089] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001)83buildbot # [ 0.003091] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)84buildbot # [ 0.003092] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d]85buildbot # [ 0.003094] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219]86buildbot # [ 0.003094] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]87buildbot # [ 0.003095] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385]88buildbot # [ 0.003095] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd]89buildbot # [ 0.003096] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9]90buildbot # [ 0.003096] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421]91buildbot # [ 0.003511] No NUMA configuration found92buildbot # [ 0.003512] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff]93buildbot # [ 0.003515] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff]94buildbot # [ 0.003604] Zone ranges:95buildbot # [ 0.003605] DMA [mem 0x0000000000001000-0x0000000000ffffff]96buildbot # [ 0.003606] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff]97buildbot # [ 0.003608] Normal empty98buildbot # [ 0.003608] Device empty99buildbot # [ 0.003609] Movable zone start for each node100buildbot # [ 0.003610] Early memory node ranges101buildbot # [ 0.003610] node 0: [mem 0x0000000000001000-0x000000000009efff]102buildbot # [ 0.003611] node 0: [mem 0x0000000000100000-0x000000003ffd7fff]103buildbot # [ 0.003612] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]104buildbot # [ 0.003633] On node 0, zone DMA: 1 pages in unavailable ranges105buildbot # [ 0.003900] On node 0, zone DMA: 97 pages in unavailable ranges106buildbot # [ 0.020921] On node 0, zone DMA32: 40 pages in unavailable ranges107buildbot # [ 0.021821] ACPI: PM-Timer IO Port: 0x608108buildbot # [ 0.021835] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])109buildbot # [ 0.021863] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23110buildbot # [ 0.021866] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)111buildbot # [ 0.021867] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)112buildbot # [ 0.021868] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)113buildbot # [ 0.021869] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)114buildbot # [ 0.021870] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)115buildbot # [ 0.021872] ACPI: Using ACPI (MADT) for SMP configuration information116buildbot # [ 0.021873] ACPI: HPET id: 0x8086a201 base: 0xfed00000117buildbot # [ 0.021879] TSC deadline timer available118buildbot # [ 0.021884] CPU topo: Max. logical packages: 1119buildbot # [ 0.021885] CPU topo: Max. logical dies: 1120buildbot # [ 0.021885] CPU topo: Max. dies per package: 1121buildbot # [ 0.021889] CPU topo: Max. threads per core: 1122buildbot # [ 0.021890] CPU topo: Num. cores per package: 1123buildbot # [ 0.021890] CPU topo: Num. threads per package: 1124buildbot # [ 0.021891] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs125buildbot # [ 0.021910] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()126buildbot # [ 0.021944] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]127buildbot # [ 0.021945] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]128buildbot # [ 0.021947] [mem 0x40000000-0xafffffff] available for PCI devices129buildbot # [ 0.021948] Booting paravirtualized kernel on KVM130buildbot # [ 0.021951] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns131buildbot # [ 0.026411] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1132buildbot # [ 0.028750] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152133buildbot # [ 0.028806] kvm-guest: PV spinlocks disabled, single CPU134buildbot # [ 0.028807] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/9xhbgzz5wpg9misgjddzackhxq9q0j8m-nixos-system-buildbot-test/init regInfo=/nix/store/b6s52ljz5j7ys18rx1nanl79k9qkyygl-closure-info/registration console=ttyS0,115200n8 console=tty0135buildbot # [ 0.028907] Unknown kernel command line parameters "regInfo=/nix/store/b6s52ljz5j7ys18rx1nanl79k9qkyygl-closure-info/registration", will be passed to user space.136buildbot # [ 0.028925] random: crng init done137buildbot # [ 0.028926] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes138buildbot # [ 0.029980] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)139buildbot # [ 0.030011] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)140buildbot # [ 0.030046] Fallback order for Node 0: 0141buildbot # [ 0.030049] Built 1 zonelists, mobility grouping on. Total pages: 262006142buildbot # [ 0.030050] Policy zone: DMA32143buildbot # [ 0.032417] mem auto-init: stack:all(zero), heap alloc:on, heap free:off144buildbot # [ 0.035654] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1145buildbot # [ 0.037843] allocated 2097152 bytes of page_ext146buildbot # [ 0.046128] ftrace: allocating 48732 entries in 192 pages147buildbot # [ 0.046132] ftrace: allocated 192 pages with 2 groups148buildbot # [ 0.047020] Dynamic Preempt: lazy149buildbot # [ 0.047139] rcu: Preemptible hierarchical RCU implementation.150buildbot # [ 0.047139] rcu: RCU event tracing is enabled.151buildbot # [ 0.047140] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.152buildbot # [ 0.047141] Trampoline variant of Tasks RCU enabled.153buildbot # [ 0.047142] Rude variant of Tasks RCU enabled.154buildbot # [ 0.047142] Tracing variant of Tasks RCU enabled.155buildbot # [ 0.047142] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.156buildbot # [ 0.047143] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1157buildbot # [ 0.047160] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.158buildbot # [ 0.047161] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.159buildbot # [ 0.047162] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.160buildbot # [ 0.051896] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16161buildbot # [ 0.052192] rcu: srcu_init: Setting srcu_struct sizes based on contention.162buildbot # [ 0.052200] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns163buildbot # [ 0.052304] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)164buildbot # [ 0.058405] Console: colour VGA+ 80x25165buildbot # [ 0.058411] printk: legacy console [tty0] enabled166buildbot # [ 0.096807] printk: legacy console [ttyS0] enabled167buildbot # [ 0.274999] ACPI: Core revision 20250807168buildbot # [ 0.276482] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns169buildbot # [ 0.279554] APIC: Switch to symmetric I/O mode setup170buildbot # [ 0.281312] x2apic enabled171buildbot # [ 0.282580] APIC: Switched APIC routing to: physical x2apic172buildbot # [ 0.285420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1173buildbot # [ 0.287194] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2caf45e6a57, max_idle_ns: 440795365367 ns174buildbot # [ 0.290201] Calibrating delay loop (skipped) preset value.. 6199.99 BogoMIPS (lpj=3099998)175buildbot # [ 0.292313] x86/cpu: User Mode Instruction Prevention (UMIP) activated176buildbot # [ 0.293417] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127177buildbot # [ 0.294199] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0178buildbot # [ 0.295206] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto179buildbot # [ 0.297199] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl180buildbot # [ 0.299201] Spectre V2 : Mitigation: Retpolines181buildbot # [ 0.301199] RETBleed: Mitigation: untrained return thunk182buildbot # [ 0.302200] Speculative Return Stack Overflow: Mitigation: SMT disabled183buildbot # [ 0.304200] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization184buildbot # [ 0.306199] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT185buildbot # [ 0.307206] Spectre V2 : Enabling Speculation Barrier for firmware calls186buildbot # [ 0.308199] active return thunk: retbleed_return_thunk187buildbot # [ 0.309204] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier188buildbot # [ 0.311217] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'189buildbot # [ 0.313198] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'190buildbot # [ 0.315198] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'191buildbot # [ 0.316199] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256192buildbot # [ 0.318198] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.193buildbot # [ 0.342037] Freeing SMP alternatives memory: 44K194buildbot # [ 0.343201] pid_max: default: 32768 minimum: 301195buildbot # [ 0.344296] LSM: initializing lsm=capability,landlock,yama,bpf,ima196buildbot # [ 0.345280] landlock: Up and running.197buildbot # [ 0.346859] Yama: becoming mindful.198buildbot # [ 0.347971] LSM support for eBPF active199buildbot # [ 0.348978] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)200buildbot # [ 0.350223] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)201buildbot # [ 0.353689] smpboot: CPU0: AMD Ryzen 9 3900 12-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)202buildbot # [ 0.354672] Performance Events: Fam17h+ core perfctr, AMD PMU driver.203buildbot # [ 0.355202] ... version: 0204buildbot # [ 0.356199] ... bit width: 48205buildbot # [ 0.357210] ... generic counters: 6206buildbot # [ 0.358199] ... generic bitmap: 000000000000003f207buildbot # [ 0.359199] ... fixed-purpose counters: 0208buildbot # [ 0.360199] ... fixed-purpose bitmap: 0000000000000000209buildbot # [ 0.361199] ... value mask: 0000ffffffffffff210buildbot # [ 0.362199] ... max period: 00007fffffffffff211buildbot # [ 0.363200] ... global_ctrl mask: 000000000000003f212buildbot # [ 0.364299] signal: max sigframe size: 1776213buildbot # [ 0.365321] rcu: Hierarchical SRCU implementation.214buildbot # [ 0.366202] rcu: Max phase no-delay instances is 400.215buildbot # [ 0.370489] smp: Bringing up secondary CPUs ...216buildbot # [ 0.371215] smp: Brought up 1 node, 1 CPU217buildbot # [ 0.372203] smpboot: Total of 1 processors activated (6199.99 BogoMIPS)218buildbot # [ 0.373403] Memory: 943024K/1048024K available (17215K kernel code, 2726K rwdata, 13584K rodata, 3644K init, 2988K bss, 97584K reserved, 0K cma-reserved)219buildbot # [ 0.374481] devtmpfs: initialized220buildbot # [ 0.375445] x86/mm: Memory block size: 128MB221buildbot # [ 0.376887] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)222buildbot # [ 0.378234] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).223buildbot # [ 0.379290] pinctrl core: initialized pinctrl subsystem224buildbot # [ 0.380504] PM: RTC time: 07:06:25, date: 2026-09-06225buildbot # [ 0.383827] NET: Registered PF_NETLINK/PF_ROUTE protocol family226buildbot # [ 0.384545] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations227buildbot # [ 0.385223] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations228buildbot # [ 0.386343] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations229buildbot # [ 0.387217] audit: initializing netlink subsys (disabled)230buildbot # [ 0.388510] thermal_sys: Registered thermal governor 'fair_share'231buildbot # [ 0.388511] thermal_sys: Registered thermal governor 'bang_bang'232buildbot # [ 0.389201] thermal_sys: Registered thermal governor 'step_wise'233buildbot # [ 0.390204] audit: type=2000 audit(1788678386.477:1): state=initialized audit_enabled=0 res=1234buildbot # [ 0.392203] thermal_sys: Registered thermal governor 'user_space'235buildbot # [ 0.392204] thermal_sys: Registered thermal governor 'power_allocator'236buildbot # [ 0.393224] cpuidle: using governor menu237buildbot # [ 0.396086] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5238buildbot # [ 0.397501] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]239buildbot # [ 0.398201] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry240buildbot # [ 0.399212] PCI: Using configuration type 1 for base access241buildbot # [ 0.400333] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.242buildbot # [ 0.405446] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages243buildbot # [ 0.406200] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page244buildbot # [ 0.411200] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages245buildbot # [ 0.412199] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page246buildbot # [ 0.422548] ACPI: Added _OSI(Module Device)247buildbot # [ 0.423199] ACPI: Added _OSI(Processor Device)248buildbot # [ 0.428198] ACPI: Added _OSI(Processor Aggregator Device)249buildbot # [ 0.433265] ACPI: 1 ACPI AML tables successfully acquired and loaded250buildbot # [ 0.437451] ACPI: Interpreter enabled251buildbot # [ 0.438212] ACPI: PM: (supports S0 S3 S4 S5)252buildbot # [ 0.441200] ACPI: Using IOAPIC for interrupt routing253buildbot # [ 0.442270] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug254buildbot # [ 0.445199] PCI: Using E820 reservations for host bridge windows255buildbot # [ 0.446315] ACPI: Enabled 2 GPEs in block 00 to 3F256buildbot # [ 0.451813] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])257buildbot # [ 0.452205] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]258buildbot # [ 0.453253] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR]259buildbot # [ 0.454281] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]260buildbot # [ 0.456040] PCI host bridge to bus 0000:00261buildbot # [ 0.457083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]262buildbot # [ 0.458200] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]263buildbot # [ 0.459209] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]264buildbot # [ 0.460201] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]265buildbot # [ 0.461228] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]266buildbot # [ 0.462201] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]267buildbot # [ 0.463201] pci_bus 0000:00: root bus resource [bus 00-ff]268buildbot # [ 0.464341] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint269buildbot # [ 0.466039] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint270buildbot # [ 0.469285] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]271buildbot # [ 0.470226] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]272buildbot # [ 0.471242] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref]273buildbot # [ 0.472507] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]274buildbot # [ 0.474203] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint275buildbot # [ 0.477217] pci 0000:00:02.0: BAR 0 [io 0xc140-0xc15f]276buildbot # [ 0.478213] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]277buildbot # [ 0.479244] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]278buildbot # [ 0.480212] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]279buildbot # [ 0.482323] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint280buildbot # [ 0.485256] pci 0000:00:03.0: BAR 0 [io 0xc160-0xc17f]281buildbot # [ 0.486220] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]282buildbot # [ 0.487253] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]283buildbot # [ 0.489362] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint284buildbot # [ 0.492020] pci 0000:00:04.0: BAR 0 [io 0xc080-0xc0bf]285buildbot # [ 0.493215] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]286buildbot # [ 0.494254] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]287buildbot # [ 0.496306] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint288buildbot # [ 0.498232] pci 0000:00:05.0: BAR 0 [io 0xc180-0xc19f]289buildbot # [ 0.499217] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]290buildbot # [ 0.500258] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]291buildbot # [ 0.502487] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint292buildbot # [ 0.505203] pci 0000:00:06.0: BAR 0 [io 0xc1a0-0xc1bf]293buildbot # [ 0.506217] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]294buildbot # [ 0.507258] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]295buildbot # [ 0.509758] pci 0000:00:07.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint296buildbot # [ 0.513205] pci 0000:00:07.0: BAR 0 [io 0xc000-0xc07f]297buildbot # [ 0.514217] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]298buildbot # [ 0.515259] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]299buildbot # [ 0.517492] pci 0000:00:08.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint300buildbot # [ 0.520221] pci 0000:00:08.0: BAR 0 [io 0xc1c0-0xc1df]301buildbot # [ 0.521222] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]302buildbot # [ 0.522285] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]303buildbot # [ 0.523217] pci 0000:00:08.0: ROM [mem 0xfeb80000-0xfebbffff pref]304buildbot # [ 0.525543] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint305buildbot # [ 0.527783] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]306buildbot # [ 0.528261] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]307buildbot # [ 0.530532] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint308buildbot # [ 0.533234] pci 0000:00:0a.0: BAR 0 [io 0xc0c0-0xc0ff]309buildbot # [ 0.534226] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]310buildbot # [ 0.535262] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]311buildbot # [ 0.537817] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint312buildbot # [ 0.540212] pci 0000:00:0b.0: BAR 0 [io 0xc1e0-0xc1ff]313buildbot # [ 0.541212] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff]314buildbot # [ 0.542247] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]315buildbot # [ 0.544261] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint316buildbot # [ 0.546073] pci 0000:00:1d.0: BAR 4 [io 0xc200-0xc21f]317buildbot # [ 0.547514] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint318buildbot # [ 0.549014] pci 0000:00:1d.1: BAR 4 [io 0xc220-0xc23f]319buildbot # [ 0.550506] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint320buildbot # [ 0.552227] pci 0000:00:1d.2: BAR 4 [io 0xc240-0xc25f]321buildbot # [ 0.553671] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint322buildbot # [ 0.555140] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff]323buildbot # [ 0.556640] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint324buildbot # [ 0.557772] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO325buildbot # [ 0.558636] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint326buildbot # [ 0.561273] pci 0000:00:1f.2: BAR 4 [io 0xc260-0xc27f]327buildbot # [ 0.562225] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff]328buildbot # [ 0.563941] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint329buildbot # [ 0.566745] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]330buildbot # [ 0.572761] ACPI: PCI: Interrupt link LNKA configured for IRQ 10331buildbot # [ 0.573350] ACPI: PCI: Interrupt link LNKB configured for IRQ 10332buildbot # [ 0.574333] ACPI: PCI: Interrupt link LNKC configured for IRQ 11333buildbot # [ 0.575342] ACPI: PCI: Interrupt link LNKD configured for IRQ 11334buildbot # [ 0.576326] ACPI: PCI: Interrupt link LNKE configured for IRQ 10335buildbot # [ 0.577320] ACPI: PCI: Interrupt link LNKF configured for IRQ 10336buildbot # [ 0.578327] ACPI: PCI: Interrupt link LNKG configured for IRQ 11337buildbot # [ 0.579356] ACPI: PCI: Interrupt link LNKH configured for IRQ 11338buildbot # [ 0.580250] ACPI: PCI: Interrupt link GSIA configured for IRQ 16339buildbot # [ 0.581211] ACPI: PCI: Interrupt link GSIB configured for IRQ 17340buildbot # [ 0.582218] ACPI: PCI: Interrupt link GSIC configured for IRQ 18341buildbot # [ 0.583218] ACPI: PCI: Interrupt link GSID configured for IRQ 19342buildbot # [ 0.584215] ACPI: PCI: Interrupt link GSIE configured for IRQ 20343buildbot # [ 0.585217] ACPI: PCI: Interrupt link GSIF configured for IRQ 21344buildbot # [ 0.586218] ACPI: PCI: Interrupt link GSIG configured for IRQ 22345buildbot # [ 0.587212] ACPI: PCI: Interrupt link GSIH configured for IRQ 23346buildbot # [ 0.589188] iommu: Default domain type: Translated347buildbot # [ 0.590208] iommu: DMA domain TLB invalidation policy: lazy mode348buildbot # [ 0.591456] ACPI: bus type USB registered349buildbot # [ 0.592266] usbcore: registered new interface driver usbfs350buildbot # [ 0.593221] usbcore: registered new interface driver hub351buildbot # [ 0.594222] usbcore: registered new device driver usb352buildbot # [ 0.595952] NetLabel: Initializing353buildbot # [ 0.596204] NetLabel: domain hash size = 128354buildbot # [ 0.597199] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO355buildbot # [ 0.598259] NetLabel: unlabeled traffic allowed by default356buildbot # [ 0.599210] PCI: Using ACPI for IRQ routing357buildbot # [ 0.688166] pci 0000:00:01.0: vgaarb: setting as boot VGA device358buildbot # [ 0.688195] pci 0000:00:01.0: vgaarb: bridge control possible359buildbot # [ 0.688195] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none360buildbot # [ 0.688205] vgaarb: loaded361buildbot # [ 0.689122] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0362buildbot # [ 0.690088] hpet0: 3 comparators, 64-bit 100.000000 MHz counter363buildbot # [ 0.696310] clocksource: Switched to clocksource kvm-clock364buildbot # [ 0.701192] VFS: Disk quotas dquot_6.6.0365buildbot # [ 0.702550] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)366buildbot # [ 0.704856] pnp: PnP ACPI init367buildbot # [ 0.706328] ACPI: IRQ 4 override to edge(!), high(!)368buildbot # [ 0.708076] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved369buildbot # [ 0.710716] pnp: PnP ACPI: found 6 devices370buildbot # [ 0.718958] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns371buildbot # [ 0.721105] clocksource: Switched to clocksource acpi_pm372buildbot # [ 0.722490] NET: Registered PF_INET protocol family373buildbot # [ 0.723872] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)374buildbot # [ 0.740858] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)375buildbot # [ 0.743264] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)376buildbot # [ 0.745299] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)377buildbot # [ 0.747257] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)378buildbot # [ 0.749250] TCP: Hash tables configured (established 8192 bind 8192)379buildbot # [ 0.750908] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)380buildbot # [ 0.752810] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)381buildbot # [ 0.754482] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)382buildbot # [ 0.756097] NET: Registered PF_UNIX/PF_LOCAL protocol family383buildbot # [ 0.757552] NET: Registered PF_XDP protocol family384buildbot # [ 0.759065] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]385buildbot # [ 0.761091] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]386buildbot # [ 0.763088] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]387buildbot # [ 0.765337] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]388buildbot # [ 0.767552] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]389buildbot # [ 0.769696] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]390buildbot # [ 0.772748] ACPI: \_SB_.GSIA: Enabled at IRQ 16391buildbot # [ 0.775846] ACPI: \_SB_.GSIB: Enabled at IRQ 17392buildbot # [ 0.778669] ACPI: \_SB_.GSIC: Enabled at IRQ 18393buildbot # [ 0.781574] ACPI: \_SB_.GSID: Enabled at IRQ 19394buildbot # [ 0.784153] PCI: CLS 0 bytes, default 64395buildbot # [ 0.786186] Trying to unpack rootfs image as initramfs...396buildbot # [ 0.791490] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf45e6a57, max_idle_ns: 440795365367 ns397buildbot # [ 0.839473] Initialise system trusted keyrings398buildbot # [ 0.844274] workingset: timestamp_bits=40 max_order=18 bucket_order=0399buildbot # [ 0.871854] Key type asymmetric registered400buildbot # [ 0.878051] Asymmetric key parser 'x509' registered401buildbot # [ 0.879356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)402buildbot # [ 0.885181] io scheduler mq-deadline registered403buildbot # [ 0.886331] io scheduler kyber registered404buildbot # [ 0.890578] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled405buildbot # [ 0.892372] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A406buildbot # [ 0.898952] Linux agpgart interface v0.103407buildbot # [ 0.902107] ACPI: bus type drm_connector registered408buildbot # [ 0.905171] usbcore: registered new interface driver usbserial_generic409buildbot # [ 0.906732] usbserial: USB Serial support registered for generic410buildbot # [ 0.911059] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled411buildbot # [ 0.915160] drop_monitor: Initializing network drop monitor service412buildbot # [ 0.916869] NET: Registered PF_INET6 protocol family413buildbot # [ 0.922526] Segment Routing with IPv6414buildbot # [ 0.925067] In-situ OAM (IOAM) with IPv6415buildbot # [ 0.928312] IPI shorthand broadcast: enabled416buildbot # [ 0.933712] sched_clock: Marking stable (702024331, 230996487)->(1074509216, -141488398)417buildbot # [ 0.939274] registered taskstats version 1418buildbot # [ 0.940637] Loading compiled-in X.509 certificates419buildbot # [ 0.954977] Demotion targets for Node 0: null420buildbot # [ 0.958262] Key type .fscrypt registered421buildbot # [ 0.961039] Key type fscrypt-provisioning registered422buildbot # [ 0.962611] ima: No TPM chip found, activating TPM-bypass!423buildbot # [ 0.968061] ima: Allocated hash algorithm: sha1424buildbot # [ 0.969269] ima: No architecture policies found425buildbot # [ 0.973198] PM: Magic number: 10:274:116426buildbot # [ 0.975194] RAS: Correctable Errors collector initialized.427buildbot # [ 0.984390] clk: Disabling unused clocks428buildbot # [ 0.989050] PM: genpd: Disabling unused power domains429buildbot # [ 1.190270] Freeing initrd memory: 29080K430buildbot # [ 1.194460] Freeing unused decrypted memory: 2028K431buildbot # [ 1.197332] Freeing unused kernel image (initmem) memory: 3644K432buildbot # [ 1.199029] Write protecting the kernel read-only data: 32768k433buildbot # [ 1.201470] Freeing unused kernel image (text/rodata gap) memory: 1216K434buildbot # [ 1.203478] Freeing unused kernel image (rodata/data gap) memory: 752K435buildbot # [ 1.237163] x86/mm: Checked W+X mappings: passed, no W+X pages found.436buildbot # [ 1.238666] Run /init as init process437buildbot # [ 1.248367] systemd[1]: Inserted module 'autofs4'438buildbot # [ 1.264707] fuse: init (API version 7.45)439buildbot # [ 1.270481] ACPI: \_SB_.GSIG: Enabled at IRQ 22440buildbot # [ 1.273363] ACPI: \_SB_.GSIH: Enabled at IRQ 23441buildbot # [ 1.276901] ACPI: \_SB_.GSIE: Enabled at IRQ 20442buildbot # [ 1.279872] ACPI: \_SB_.GSIF: Enabled at IRQ 21443buildbot # [ 1.306490] systemd[1]: Successfully made /usr/ read-only.444buildbot # [ 1.643419] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)445buildbot # [ 1.651309] systemd[1]: Detected virtualization kvm.446buildbot # [ 1.652740] systemd[1]: Detected architecture x86-64.447buildbot # [ 1.654107] systemd[1]: Running in initrd.448buildbot # [ 1.655529] systemd[1]: Initializing machine ID from random generator.449buildbot # [ 1.657391] systemd[1]: Hostname set to <buildbot>.450buildbot # [ 1.828648] systemd[1]: bpf-restrict-fs: LSM BPF program attached451buildbot # [ 1.868328] systemd[1]: Queued start job for default target Initrd Default Target.452buildbot # [ 1.872334] systemd[1]: Created slice Slice /system/modprobe.453buildbot # [ 1.874161] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.454buildbot # [ 1.876167] systemd[1]: Expecting device /dev/disk/by-label/nixos...455buildbot # [ 1.877747] systemd[1]: Reached target Path Units.456buildbot # [ 1.879072] systemd[1]: Reached target Slice Units.457buildbot # [ 1.880372] systemd[1]: Reached target Swaps.458buildbot # [ 1.881565] systemd[1]: Reached target Timer Units.459buildbot # [ 1.883129] systemd[1]: Listening on D-Bus System Message Bus Socket.460buildbot # [ 1.884792] systemd[1]: Listening on Journal Socket (/dev/log).461buildbot # [ 1.886494] systemd[1]: Listening on Journal Sockets.462buildbot # [ 1.887924] systemd[1]: Listening on udev Control Socket.463buildbot # [ 1.889395] systemd[1]: Listening on udev Kernel Socket.464buildbot # [ 1.890750] systemd[1]: Reached target Socket Units.465buildbot # [ 1.893081] systemd[1]: Starting Create List of Static Device Nodes...466buildbot # [ 1.900740] systemd[1]: Starting Load Kernel Module 9pnet_virtio...467buildbot # [ 1.910803] systemd[1]: Starting Load Kernel Module configfs...468buildbot # [ 1.923252] systemd[1]: Starting Journal Service...469buildbot # [ 1.935089] systemd[1]: Starting Load Kernel Modules...470buildbot # [ 1.944252] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os471buildbot # [ 1.947350] netfs: FS-Cache loaded472buildbot # [ 1.956354] systemd[1]: Starting Coldplug All udev Devices...473buildbot # [ 1.961913] 9pnet: Installing 9P2000 support474buildbot # [ 1.975706] systemd[1]: Finished Create List of Static Device Nodes.475buildbot # [ 1.985750] systemd[1]: modprobe@configfs.service: Deactivated successfully.476buildbot # [ 1.987969] systemd-journald[67]: Collecting audit messages is disabled.477buildbot # [ 1.998177] systemd[1]: Finished Load Kernel Module configfs.478buildbot # [ 2.012419] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.479buildbot # [ 2.021644] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.480buildbot # [ 2.025047] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev481buildbot # [ 2.032982] systemd[1]: Finished Load Kernel Module 9pnet_virtio.482buildbot # [ 2.040769] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config483buildbot # [ 2.057197] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...484buildbot # [ 2.072177] systemd[1]: Finished Load Kernel Modules.485buildbot # [ 2.085328] systemd[1]: Starting Apply Kernel Variables...486buildbot # [ 2.100629] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.487buildbot # [ 2.115260] systemd[1]: Starting Create Static Device Nodes in /dev...488buildbot # [ 2.130429] systemd[1]: Finished Apply Kernel Variables.489buildbot # [ 2.145840] systemd[1]: Started Journal Service.490buildbot # [ 1.916503] systemd-modules-load[68]: Inserted module 'dm_mod'491buildbot # [ 1.920452] systemd-modules-load[68]: Inserted module 'virtio_balloon'492buildbot # [ 1.923399] systemd-modules-load[68]: Inserted module 'virtio_gpu'493buildbot # [ 1.931092] systemd[1]: Finished Create Static Device Nodes in /dev.494buildbot # [ 1.939149] systemd[1]: Reached target Preparation for Local File Systems.495buildbot # [ 1.940884] systemd[1]: Reached target Local File Systems.496buildbot # [ 1.945131] systemd[1]: Starting Create System Files and Directories...497buildbot # [ 1.953379] systemd[1]: Starting Rule-based Manager for Device Events and Files...498buildbot # [ 1.973344] systemd[1]: Finished Create System Files and Directories.499buildbot # [ 1.982188] systemd[1]: Finished Coldplug All udev Devices.500buildbot # [ 1.992531] systemd-udevd[82]: Using default interface naming scheme 'v261'.501buildbot # [ 2.008483] systemd[1]: Started Rule-based Manager for Device Events and Files.502buildbot # [ 2.011160] systemd[1]: Reached target System Initialization.503buildbot # [ 2.012391] systemd[1]: Reached target Basic System.504buildbot # [ 2.480751] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12505buildbot # [ 2.488565] virtio_blk virtio5: 1/0/0 default/read/poll queues506buildbot # [ 2.507775] serio: i8042 KBD port at 0x60,0x64 irq 1507buildbot # [ 2.508698] serio: i8042 AUX port at 0x60,0x64 irq 12508buildbot # [ 2.513934] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)509buildbot # [ 2.521405] ehci-pci 0000:00:1d.7: EHCI Host Controller510buildbot # [ 2.522397] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1511buildbot # [ 2.524820] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000512buildbot # [ 2.534041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00513buildbot # [ 2.536437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18514buildbot # [ 2.537955] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1515buildbot # [ 2.542502] usb usb1: Product: EHCI Host Controller516buildbot # [ 2.545150] usb usb1: Manufacturer: Linux 6.18.49 ehci_hcd517buildbot # [ 2.548018] usb usb1: SerialNumber: 0000:00:1d.7518buildbot # [ 2.549322] hub 1-0:1.0: USB hub found519buildbot # [ 2.551283] hub 1-0:1.0: 6 ports detected520buildbot # [ 2.558638] uhci_hcd 0000:00:1d.0: UHCI Host Controller521buildbot # [ 2.559763] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2522buildbot # [ 2.577654] uhci_hcd 0000:00:1d.0: detected 2 ports523buildbot # [ 2.583932] SCSI subsystem initialized524buildbot # [ 2.588501] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c200525buildbot # [ 2.597192] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18526buildbot # [ 2.598917] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1527buildbot # [ 2.620836] usb usb2: Product: UHCI Host Controller528buildbot # [ 2.623033] usb usb2: Manufacturer: Linux 6.18.49 uhci_hcd529buildbot # [ 2.395045] (udev-worker)[87]: Network interface NamePolicy= disabled on kernel command line.530buildbot # [ 2.405602] systemd[1]: Starting Virtual Console Setup...531buildbot # [ 2.644716] usb usb2: SerialNumber: 0000:00:1d.0532buildbot # [ 2.651720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0533buildbot # [ 2.426343] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.534buildbot # [ 2.430294] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.535buildbot # [ 2.668141] hub 2-0:1.0: USB hub found536buildbot # [ 2.446172] systemd-vconsole-setup[98]: Configuration of first virtual console was skipped, ignoring remaining ones.537buildbot # [ 2.448540] systemd[1]: Finished Virtual Console Setup.538buildbot # [ 2.682549] hub 2-0:1.0: 2 ports detected539buildbot # [ 2.700081] uhci_hcd 0000:00:1d.1: UHCI Host Controller540buildbot # [ 2.701094] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3541buildbot # [ 2.485482] systemd[1]: Found device /dev/disk/by-label/nixos.542buildbot # [ 2.487223] systemd[1]: Reached target Initrd Root Device.543buildbot # [ 2.720088] uhci_hcd 0000:00:1d.1: detected 2 ports544buildbot # [ 2.490696] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...545buildbot # [ 2.724349] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c220546buildbot # [ 2.729482] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18547buildbot # [ 2.734072] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1548buildbot # [ 2.741078] usb usb3: Product: UHCI Host Controller549buildbot # [ 2.743055] usb usb3: Manufacturer: Linux 6.18.49 uhci_hcd550buildbot # [ 2.519982] systemd-fsck[108]: nixos: clean, 12/65536 files, 13019/262144 blocks551buildbot # [ 2.753085] usb usb3: SerialNumber: 0000:00:1d.1552buildbot # [ 2.527444] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.553buildbot # [ 2.760437] hub 3-0:1.0: USB hub found554buildbot # [ 2.763148] hub 3-0:1.0: 2 ports detected555buildbot # [ 2.768332] uhci_hcd 0000:00:1d.2: UHCI Host Controller556buildbot # [ 2.770177] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode557buildbot # [ 2.771711] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4558buildbot # [ 2.774096] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)559buildbot # [ 2.775590] uhci_hcd 0000:00:1d.2: detected 2 ports560buildbot # [ 2.776949] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c240561buildbot # [ 2.779103] ahci 0000:00:1f.2: flags: 64bit ncq only562buildbot # [ 2.781507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18563buildbot # [ 2.788105] scsi host0: ahci564buildbot # [ 2.788934] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1565buildbot # [ 2.791325] scsi host1: ahci566buildbot # [ 2.794077] usb usb4: Product: UHCI Host Controller567buildbot # [ 2.795518] scsi host2: ahci568buildbot # [ 2.796217] usb 1-1: new high-speed USB device number 2 using ehci-pci569buildbot # [ 2.799433] scsi host3: ahci570buildbot # [ 2.800628] usb usb4: Manufacturer: Linux 6.18.49 uhci_hcd571buildbot # [ 2.803387] scsi host4: ahci572buildbot # [ 2.806958] usb usb4: SerialNumber: 0000:00:1d.2573buildbot # [ 2.808519] scsi host5: ahci574buildbot # [ 2.809736] hub 4-0:1.0: USB hub found575buildbot # [ 2.812369] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 44 lpm-pol 1576buildbot # [ 2.814344] hub 4-0:1.0: 2 ports detected577buildbot # [ 2.818536] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 44 lpm-pol 1578buildbot # [ 2.830420] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 44 lpm-pol 1579buildbot # [ 2.837706] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 44 lpm-pol 1580buildbot # [ 2.843613] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 44 lpm-pol 1581buildbot # [ 2.845447] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 44 lpm-pol 1582buildbot # [ 2.925974] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00583buildbot # [ 2.927474] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10584buildbot # [ 2.929161] usb 1-1: Product: QEMU USB Tablet585buildbot # [ 2.929967] usb 1-1: Manufacturer: QEMU586buildbot # [ 2.930931] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1587buildbot # [ 2.946611] hid: raw HID events driver (C) Jiri Kosina588buildbot # [ 2.743327] systemd[1]: Mounting /sysroot...589buildbot # [ 3.154953] ata5: SATA link down (SStatus 0 SControl 300)590buildbot # [ 3.156529] ata2: SATA link down (SStatus 0 SControl 300)591buildbot # [ 3.158481] ata1: SATA link down (SStatus 0 SControl 300)592buildbot # [ 3.159815] ata6: SATA link down (SStatus 0 SControl 300)593buildbot # [ 3.161200] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)594buildbot # [ 3.162564] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100595buildbot # [ 3.163930] ata3.00: applying bridge limits596buildbot # [ 3.165163] ata4: SATA link down (SStatus 0 SControl 300)597buildbot # [ 3.166419] ata3.00: configured for UDMA/100598buildbot # [ 3.167949] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5599buildbot # [ 3.219885] usbcore: registered new interface driver usbhid600buildbot # [ 3.227037] usbhid: USB HID core driver601buildbot # [ 3.264345] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2602buildbot # [ 3.270078] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0603buildbot # [ 3.276375] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray604buildbot # [ 3.280713] EXT4-fs (vda): mounted filesystem 64a3bce0-8860-4134-ba85-4b0a723890d9 r/w with ordered data mode. Quota mode: none.605buildbot # [ 3.057271] systemd[1]: Mounted /sysroot.606buildbot # [ 3.058945] systemd[1]: Reached target Initrd Root File System.607buildbot # [ 3.293039] cdrom: Uniform CD-ROM driver Revision: 3.20608buildbot # [ 3.063958] systemd[1]: Starting Mountpoints Configured in the Real Root...609buildbot # [ 3.076674] systemd-sysroot-fstab-check[139]: /sysroot should be mounted in the initrd, will request daemon-reload.610buildbot # [ 3.083382] systemd[1]: Reload requested from client PID 139 ('systemd-sysroot') (unit initrd-parse-etc.service)...611buildbot # [ 3.086197] systemd[1]: Reloading...612buildbot # [ 3.169841] systemd[1]: Reloading finished in 86 ms.613buildbot # [ 3.178318] systemd-sysroot-fstab-check[139]: Requesting initrd-fs.target/start/replace...614buildbot # [ 3.184225] systemd-sysroot-fstab-check[139]: Requesting swap.target/start/replace...615buildbot # [ 3.189039] systemd[1]: initrd-parse-etc.service: Deactivated successfully.616buildbot # [ 3.191682] systemd[1]: Finished Mountpoints Configured in the Real Root.617buildbot # [ 3.194281] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.618buildbot # [ 3.196513] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio619buildbot # [ 3.744116] systemd[1]: Mounting /sysroot/nix/.ro-store...620buildbot # [ 3.747814] systemd[1]: Mounting /sysroot/nix/.rw-store...621buildbot # [ 3.752974] systemd[1]: Mounting /sysroot/run...622buildbot # [ 3.757848] systemd[1]: Mounting /sysroot/tmp/shared...623buildbot # [ 3.764418] systemd[1]: Mounting /sysroot/tmp/xchg...624buildbot # [ 4.013923] 9p: Installing v9fs 9p2000 file system support625buildbot # [ 3.789156] systemd[1]: Mounted /sysroot/nix/.rw-store.626buildbot # [ 3.794738] systemd[1]: Mounted /sysroot/nix/.ro-store.627buildbot # [ 3.799969] systemd[1]: Mounted /sysroot/run.628buildbot # [ 3.802277] systemd[1]: Mounted /sysroot/tmp/shared.629buildbot # [ 3.806243] systemd[1]: Mounted /sysroot/tmp/xchg.630buildbot # [ 3.809889] systemd[1]: Starting rw-sysroot-nix-store.service...631buildbot # [ 3.821728] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.632buildbot # [ 3.824355] systemd[1]: Finished rw-sysroot-nix-store.service.633buildbot # [ 4.743854] systemd[1]: Mounting /sysroot/nix/store...634buildbot # [ 4.765409] systemd[1]: Mounted /sysroot/nix/store.635buildbot # [ 4.767228] systemd[1]: Reached target Initrd File Systems.636buildbot # [ 4.769513] systemd[1]: Starting Find NixOS closure...637buildbot # [ 4.772902] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...638buildbot # [ 4.788505] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.639buildbot # [ 4.792652] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.640buildbot # [ 4.799116] systemd[1]: Finished Find NixOS closure.641buildbot # [ 4.800740] systemd[1]: Reached target Initrd Default Target.642buildbot # [ 4.802953] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...643buildbot # [ 4.817273] systemd[1]: Stopped target Initrd Default Target.644buildbot # [ 4.818847] systemd[1]: Stopped target Basic System.645buildbot # [ 4.820293] systemd[1]: Stopped target Initrd Root Device.646buildbot # [ 4.822170] systemd[1]: Stopped target Path Units.647buildbot # [ 4.824174] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.648buildbot # [ 4.826102] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.649buildbot # [ 4.827700] systemd[1]: Stopped target Slice Units.650buildbot # [ 4.829211] systemd[1]: Stopped target Socket Units.651buildbot # [ 4.830708] systemd[1]: Stopped target System Initialization.652buildbot # [ 4.832237] systemd[1]: Stopped target Swaps.653buildbot # [ 4.833511] systemd[1]: Stopped target Timer Units.654buildbot # [ 4.835190] systemd[1]: dbus.socket: Deactivated successfully.655buildbot # [ 4.836455] systemd[1]: Closed D-Bus System Message Bus Socket.656buildbot # [ 4.838171] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.657buildbot # [ 4.839647] systemd[1]: Stopped Find NixOS closure.658buildbot # [ 4.840970] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio659buildbot # [ 4.843553] systemd[1]: Starting rw-sysroot-nix-store.service...660buildbot # [ 4.845182] systemd[1]: systemd-sysctl.service: Deactivated successfully.661buildbot # [ 4.846716] systemd[1]: Stopped Apply Kernel Variables.662buildbot # [ 4.848159] systemd[1]: systemd-modules-load.service: Deactivated successfully.663buildbot # [ 4.850314] systemd[1]: Stopped Load Kernel Modules.664buildbot # [ 4.851715] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.665buildbot # [ 4.854140] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.666buildbot # [ 4.855645] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.667buildbot # [ 4.857196] systemd[1]: Stopped Create System Files and Directories.668buildbot # [ 4.858466] systemd[1]: Stopped target Local File Systems.669buildbot # [ 4.860164] systemd[1]: Stopped target Preparation for Local File Systems.670buildbot # [ 4.861516] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.671buildbot # [ 4.863500] systemd[1]: Stopped Coldplug All udev Devices.672buildbot # [ 4.865884] systemd[1]: Stopping Rule-based Manager for Device Events and Files...673buildbot # [ 4.868177] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.674buildbot # [ 4.869616] systemd[1]: Stopped Virtual Console Setup.675buildbot # [ 4.879875] systemd[1]: initrd-cleanup.service: Deactivated successfully.676buildbot # [ 4.884135] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.677buildbot # [ 4.887191] systemd[1]: systemd-udevd.service: Deactivated successfully.678buildbot # [ 4.889225] systemd[1]: Stopped Rule-based Manager for Device Events and Files.679buildbot # [ 4.891804] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.680buildbot # [ 4.893391] systemd[1]: Finished rw-sysroot-nix-store.service.681buildbot # [ 4.897106] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.682buildbot # [ 4.898573] systemd[1]: Closed udev Control Socket.683buildbot # [ 4.900471] systemd[1]: Starting Cleanup udev Database...684buildbot # [ 4.902203] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.685buildbot # [ 4.903707] systemd[1]: Stopped Create Static Device Nodes in /dev.686buildbot # [ 4.905193] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.687buildbot # [ 4.907213] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.688buildbot # [ 4.908663] systemd[1]: kmod-static-nodes.service: Deactivated successfully.689buildbot # [ 4.910480] systemd[1]: Stopped Create List of Static Device Nodes.690buildbot # [ 4.923314] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.691buildbot # [ 4.925664] systemd[1]: Finished Cleanup udev Database.692buildbot # [ 4.927948] systemd[1]: Reached target Switch Root.693buildbot # [ 4.929353] systemd[1]: Starting NixOS Activation...694buildbot # [ 5.044299] initrd-nixos-activation-start[192]: booting system configuration /nix/store/9xhbgzz5wpg9misgjddzackhxq9q0j8m-nixos-system-buildbot-test695buildbot # [ 5.093834] initrd-nixos-activation-start[192]: running activation script...696buildbot # [ 5.394423] initrd-nixos-activation-start[215]: setting up /etc...697buildbot # [ 5.573725] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.698buildbot # [ 5.576242] systemd[1]: Finished NixOS Activation.699buildbot # [ 5.577917] systemd[1]: Starting Switch Root...700buildbot # [ 5.589405] systemd[1]: Switching root.701buildbot # [ 5.944392] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).702buildbot # [ 6.026907] NET: Registered PF_VSOCK protocol family703buildbot # [ 6.395421] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)704buildbot # [ 6.400897] systemd[1]: Detected virtualization kvm.705buildbot # [ 6.401889] systemd[1]: Detected architecture x86-64.706buildbot # [ 6.402908] systemd[1]: Detected first boot.707buildbot # [ 6.405816] systemd[1]: Initializing machine ID from random generator.708buildbot # [ 6.494234] systemd[1]: bpf-restrict-fs: LSM BPF program attached709buildbot # [ 6.580681] systemd[1]: Applying preset policy.710buildbot # [ 6.892045] systemd[1]: Populated /etc with preset unit settings.711buildbot # [ 7.258679] systemd[1]: initrd-switch-root.service: Deactivated successfully.712buildbot # [ 7.260590] systemd[1]: Stopped initrd-switch-root.service.713buildbot # [ 7.263741] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.714buildbot # [ 7.266416] systemd[1]: Created slice Slice /system/getty.715buildbot # [ 7.268072] systemd[1]: Created slice User and Session Slice.716buildbot # [ 7.269330] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.717buildbot # [ 7.271009] systemd[1]: Started Forward Password Requests to Wall Directory Watch.718buildbot # [ 7.272493] systemd[1]: Expecting device /dev/hvc0...719buildbot # [ 7.273493] systemd[1]: Expecting device /dev/ttyS0...720buildbot # [ 7.274599] systemd[1]: Reached target Local Encrypted Volumes.721buildbot # [ 7.275754] systemd[1]: Stopped target initrd-fs.target.722buildbot # [ 7.276849] systemd[1]: Stopped target initrd-root-fs.target.723buildbot # [ 7.277994] systemd[1]: Stopped target initrd-switch-root.target.724buildbot # [ 7.279217] systemd[1]: Reached target Virtual Machines and Containers.725buildbot # [ 7.280501] systemd[1]: Reached target Path Units.726buildbot # [ 7.281520] systemd[1]: Reached target Remote File Systems.727buildbot # [ 7.282644] systemd[1]: Reached target Slice Units.728buildbot # [ 7.283667] systemd[1]: Reached target Swaps.729buildbot # [ 7.286700] systemd[1]: Listening on Query the User Interactively for a Password.730buildbot # [ 7.290292] systemd[1]: Listening on Process Core Dump Socket.731buildbot # [ 7.293005] systemd[1]: Listening on Credential Encryption/Decryption.732buildbot # [ 7.295889] systemd[1]: Listening on Factory Reset Management.733buildbot # [ 7.297210] systemd[1]: Listening on Hostname Service Socket.734buildbot # [ 7.301148] systemd[1]: Starting Journal Log Access Socket...735buildbot # [ 7.302769] systemd[1]: Listening on Journal Audit Socket.736buildbot # [ 7.310730] systemd[1]: Listening on Console Output Muting Service Socket.737buildbot # [ 7.312280] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.738buildbot # [ 7.314018] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os739buildbot # [ 7.315789] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki740buildbot # [ 7.323275] systemd[1]: Listening on Disk Repartitioning Service Socket.741buildbot # [ 7.324760] systemd[1]: Listening on udev Control Socket.742buildbot # [ 7.326030] systemd[1]: Listening on udev Varlink Socket.743buildbot # [ 7.329381] systemd[1]: Mounting Huge Pages File System...744buildbot # [ 7.333469] systemd[1]: Mounting POSIX Message Queue File System...745buildbot # [ 7.339543] systemd[1]: Mounting Kernel Debug File System...746buildbot # [ 7.345705] systemd[1]: Mounting Kernel Trace File System...747buildbot # [ 7.351382] systemd[1]: Starting Create List of Static Device Nodes...748buildbot # [ 7.356920] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio749buildbot # [ 7.366794] systemd[1]: Starting Load Kernel Module configfs...750buildbot # [ 7.368093] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm751buildbot # [ 7.370422] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore752buildbot # [ 7.388752] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse753buildbot # [ 7.402809] systemd[1]: Mounting FUSE Control File System...754buildbot # [ 7.404407] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67755buildbot # [ 7.415141] systemd[1]: Starting Journal Service...756buildbot # [ 7.425147] systemd[1]: Starting Load Kernel Modules...757buildbot # [ 7.437880] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...758buildbot # [ 7.451604] systemd[1]: Starting Remount Root and Kernel File Systems...759buildbot # [ 7.460210] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os760buildbot # [ 7.482313] systemd[1]: Starting Coldplug All udev Devices...761buildbot # [ 7.487578] systemd-journald[285]: Collecting audit messages is enabled.762buildbot # [ 7.494850] loop: module loaded763buildbot # [ 7.506556] systemd[1]: Listening on Journal Log Access Socket.764buildbot # [ 7.518544] systemd[1]: Mounted Huge Pages File System.765buildbot # [ 7.525280] systemd[1]: Mounted POSIX Message Queue File System.766buildbot # [ 7.530056] EXT4-fs (vda): re-mounted 64a3bce0-8860-4134-ba85-4b0a723890d9.767buildbot # [ 7.533323] systemd[1]: Mounted Kernel Debug File System.768buildbot # [ 7.541138] systemd[1]: Started Journal Service.769buildbot # [ 7.311833] systemd[1]: Queued start job for default target Multi-User System.770buildbot # [ 7.314661] systemd[1]: systemd-journald.service: Deactivated successfully.771buildbot # [ 7.319952] systemd-modules-load[286]: Inserted module 'loop'772buildbot # [ 7.324842] systemd-modules-load[286]: Inserted module 'tls'773buildbot # [ 7.326868] systemd[1]: Mounted Kernel Trace File System.774buildbot # [ 7.331421] systemd[1]: Finished Create List of Static Device Nodes.775buildbot # [ 7.336124] systemd[1]: modprobe@configfs.service: Deactivated successfully.776buildbot # [ 7.337816] systemd[1]: Finished Load Kernel Module configfs.777buildbot # [ 7.342685] systemd[1]: Mounted FUSE Control File System.778buildbot # [ 7.346886] systemd[1]: Finished Load Kernel Modules.779buildbot # [ 7.349697] systemd[1]: Finished Remount Root and Kernel File Systems.780buildbot # [ 7.367296] systemd[1]: Listening on Disk Image Download Service Socket.781buildbot # [ 7.375114] systemd[1]: Mounting Kernel Configuration File System...782buildbot # [ 7.377907] systemd-oomd[287]: No swap; memory pressure usage will be degraded783buildbot # [ 7.381646] systemd[1]: Starting Flush Journal to Persistent Storage...784buildbot # [ 7.383648] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore785buildbot # [ 7.397091] systemd[1]: Starting Load/Save OS Random Seed...786buildbot # [ 7.408126] systemd[1]: Starting Apply Kernel Variables...787buildbot # [ 7.423522] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...788buildbot # [ 7.425984] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os789buildbot # [ 7.433095] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.790buildbot # [ 7.668726] systemd-journald[285]: Received client request to flush runtime journal.791buildbot # [ 7.627547] systemd[1]: Mounted Kernel Configuration File System.792buildbot # [ 7.630346] systemd[1]: Finished Load/Save OS Random Seed.793buildbot # [ 7.632514] systemd[1]: Reached target First Boot Complete.794buildbot # [ 7.634705] systemd[1]: Finished Apply Kernel Variables.795buildbot # [ 7.636759] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.796buildbot # [ 7.639459] systemd[1]: Starting Create Static Device Nodes in /dev...797buildbot # [ 7.640785] systemd[1]: Finished Create Static Device Nodes in /dev.798buildbot # [ 7.643098] systemd[1]: Reached target Preparation for Local File Systems.799buildbot # [ 7.644483] systemd[1]: Starting Rule-based Manager for Device Events and Files...800buildbot # [ 7.646060] systemd[1]: Finished Flush Journal to Persistent Storage.801buildbot # [ 7.648280] systemd[1]: Finished Coldplug All udev Devices.802buildbot # [ 7.687424] systemd-udevd[311]: Using default interface naming scheme 'v261'.803buildbot # [ 7.754888] systemd[1]: Started Rule-based Manager for Device Events and Files.804buildbot # [ 7.853825] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse805buildbot # [ 7.905107] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.806buildbot # [ 7.929459] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.807buildbot # [ 7.951644] (udev-worker)[321]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.808buildbot # [ 7.956312] (udev-worker)[327]: Network interface NamePolicy= disabled on kernel command line.809buildbot # [ 7.959444] (udev-worker)[321]: Network interface NamePolicy= disabled on kernel command line.810buildbot # [ 8.014649] systemd[1]: Condition check resulted in Virtio network device being skipped.811buildbot # [ 8.017336] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore812buildbot # [ 8.019838] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67813buildbot # [ 8.023195] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore814buildbot # [ 8.025874] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os815buildbot # [ 8.029137] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os816buildbot # [ 8.034163] systemd[1]: Mounting /run/wrappers...817buildbot # [ 8.064965] systemd[1]: Mounted /run/wrappers.818buildbot # [ 8.066242] systemd[1]: Reached target Local File Systems.819buildbot # [ 8.070739] systemd[1]: Listening on Boot Loader Control Service Socket.820buildbot # [ 8.077733] systemd[1]: Starting register-nix-paths.service...821buildbot # [ 8.079952] systemd[1]: Starting Create SUID/SGID Wrappers...822buildbot # [ 8.082784] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.823buildbot # [ 8.087334] systemd[1]: Starting Save Transient machine-id to Disk...824buildbot # [ 8.100098] systemd[1]: Starting Create System Files and Directories...825buildbot # [ 8.183190] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.826buildbot # [ 8.188314] systemd[1]: Finished Save Transient machine-id to Disk.827buildbot # [ 8.240212] systemd[1]: Finished Create System Files and Directories.828buildbot # [ 8.250919] systemd[1]: Starting Rebuild Journal Catalog...829buildbot # [ 8.264062] systemd[1]: Starting Record System Boot/Shutdown in UTMP...830buildbot # [ 8.537605] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console831buildbot # [ 8.338638] systemd[1]: Finished Record System Boot/Shutdown in UTMP.832buildbot # [ 8.375877] systemd[1]: Finished Rebuild Journal Catalog.833buildbot # [ 8.384738] systemd[1]: Starting Update is Completed...834buildbot # [ 8.435267] systemd[1]: Finished Update is Completed.835buildbot # [ 8.575103] mousedev: PS/2 mouse device common for all mice836buildbot # [ 8.577910] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3837buildbot # [ 8.612639] ACPI: button: Power Button [PWRF]838buildbot # [ 8.702302] Console: switching to colour dummy device 80x25839buildbot # [ 8.751087] rtc_cmos 00:04: RTC can wake from S4840buildbot # [ 8.777500] rtc_cmos 00:04: registered as rtc0841buildbot # [ 8.777615] rtc_cmos 00:04: setting system clock to 2026-09-06T07:06:34 UTC (1788678394)842buildbot # [ 8.777709] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs843buildbot # [ 8.779763] systemd-journald[285]: Time jumped backwards, rotating.844buildbot # [ 8.809135] parport_pc 00:02: reported by Plug and Play ACPI845buildbot # [ 8.635175] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.846buildbot # [ 8.638911] systemd[1]: Finished Create SUID/SGID Wrappers.847buildbot # [ 8.809241] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]848buildbot # [ 8.876321] [drm] Found bochs VGA, ID 0xb0c5.849buildbot # [ 8.876323] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.850buildbot # [ 8.878732] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:09.0/virtio7/input/input4851buildbot # [ 8.889410] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic852buildbot # [ 8.907021] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized853buildbot # [ 8.913019] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0854buildbot # [ 8.883254] systemd[1]: Finished register-nix-paths.service.855buildbot # [ 8.886320] systemd[1]: Reached target System Initialization.856buildbot # [ 8.887944] systemd[1]: Started Discard unused filesystem blocks once a week.857buildbot # [ 8.889895] systemd[1]: Started Daily Cleanup of Temporary Directories.858buildbot # [ 8.892295] systemd[1]: Reached target Timer Units.859buildbot # [ 8.893748] systemd[1]: Listening on D-Bus System Message Bus Socket.860buildbot # [ 8.895765] systemd[1]: Listening on Nix Daemon Socket.861buildbot # [ 8.898399] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).862buildbot # [ 8.903717] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.863buildbot # [ 8.905422] systemd[1]: Reached target Socket Units.864buildbot # [ 8.906491] systemd[1]: Reached target Basic System.865buildbot # [ 8.909888] systemd[1]: Started backdoor.service.866buildbot # [ 8.913061] systemd[1]: Starting Import lastlog data into lastlog2 database...867buildbot # [ 8.923100] systemd[1]: Starting Name Service Cache Daemon (nsncd)...868buildbot # [ 8.938868] systemd[1]: Starting Post-Boot Actions...869buildbot # [ 8.960177] systemd[1]: Started Reset console on configuration changes.870buildbot # [ 8.983150] systemd[1]: Starting resolvconf update...871buildbot # [ 8.985974] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.872buildbot # connecting to host...873buildbot # [ 9.034439] nsncd[416]: Sep 06 07:06:34.980 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"874buildbot # [ 9.039493] systemd[1]: Started Name Service Cache Daemon (nsncd).875buildbot: Guest shell says: b'Spawning backdoor root shell...\n'876buildbot # [ 9.048389] systemd[1]: Finished Post-Boot Actions.877buildbot: connected to guest root shell878buildbot: (connecting took 9.94 seconds)879buildbot: (finished: waiting for the VM to finish booting, in 10.16 seconds)880buildbot # [ 9.084898] systemd[1]: Finished Import lastlog data into lastlog2 database.881buildbot # [ 9.094751] systemd[1]: Reached target Host and Network Name Lookups.882buildbot # [ 9.097202] systemd[1]: Reached target User and Group Name Lookups.883buildbot # [ 9.108222] systemd[1]: Starting D-Bus System Message Bus...884buildbot # [ 9.125530] systemd[1]: Starting User Login Management...885buildbot # [ 9.140484] systemd[1]: Starting Virtual Console Setup...886buildbot # [ 9.073000] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt887buildbot # [ 9.073109] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD888buildbot # [ 9.168975] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6889buildbot # [ 9.169276] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5890buildbot # [ 9.463538] ppdev: user-space parallel port driver891buildbot # [ 9.539590] Console: switching to colour frame buffer device 160x50892buildbot # [ 9.611350] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660)893buildbot # [ 9.623983] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)894buildbot # [ 9.736345] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device895buildbot # [ 9.263336] dbus-broker-launch[446]: Looking up NSS user entry for 'systemd-timesync'...896buildbot # [ 9.514736] dbus-broker-launch[446]: NSS returned no entry for 'systemd-timesync'897buildbot # [ 9.518544] dbus-broker-launch[446]: Invalid user-name in /nix/store/5pda55bmnn6d5x7vdnxdgvb0f747kgx2-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"898buildbot # [ 9.525212] systemd[1]: Stopped target Host and Network Name Lookups.899buildbot # [ 9.531482] systemd[1]: Stopping Host and Network Name Lookups...900buildbot # [ 9.533834] network-addresses-eth1-start[526]: adding address 192.168.1.1/24... done901buildbot # [ 9.539175] network-addresses-eth1-start[526]: adding address 2001:db8:1::1/64... done902buildbot # [ 9.540924] nsncd[507]: Sep 06 07:06:35.317 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"903buildbot # [ 9.545264] systemd[1]: Stopped target User and Group Name Lookups.904buildbot # [ 9.548798] systemd[1]: Stopping User and Group Name Lookups...905buildbot # [ 9.553727] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...906buildbot # [ 9.555986] systemd[1]: nscd.service: Deactivated successfully.907buildbot # [ 9.560260] systemd[1]: Stopped Name Service Cache Daemon (nsncd).908buildbot # [ 9.561504] systemd[1]: Started D-Bus System Message Bus.909buildbot # [ 9.562786] systemd-logind[447]: Watching system buttons on /dev/input/event2 (Power Button)910buildbot # [ 9.568688] systemd-logind[447]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)911buildbot # [ 9.570615] systemd[1]: Starting Name Service Cache Daemon (nsncd)...912buildbot # [ 9.573970] dbus-broker-launch[446]: Ready913buildbot # [ 9.576132] systemd[1]: Finished resolvconf update.914buildbot # [ 9.577774] systemd[1]: Reached target Preparation for Network.915buildbot # [ 9.582562] systemd[1]: Starting DHCP Client...916buildbot # [ 9.583658] systemd[1]: Starting Address configuration of eth1...917buildbot # [ 9.584879] systemd[1]: Starting Extra networking commands....918buildbot # [ 9.587894] systemd[1]: Started Name Service Cache Daemon (nsncd).919buildbot # [ 9.590172] systemd[1]: Reached target Host and Network Name Lookups.920buildbot # [ 9.591463] systemd[1]: Reached target User and Group Name Lookups.921buildbot # [ 9.594932] systemd-logind[447]: New seat seat0.922buildbot # [ 9.596598] systemd-logind[447]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)923buildbot # [ 9.599185] systemd[1]: Finished Address configuration of eth1.924buildbot # [ 9.602851] systemd[1]: Started User Login Management.925buildbot # [ 9.603989] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.926buildbot # [ 9.606496] systemd[1]: Stopped Virtual Console Setup.927buildbot # [ 9.609154] systemd[1]: Starting linger-users.service...928buildbot # [ 9.610296] systemd[1]: Starting Virtual Console Setup...929buildbot # [ 9.676852] systemd[1]: linger-users.service: Deactivated successfully.930buildbot # [ 9.681761] systemd[1]: Finished linger-users.service.931buildbot # [ 9.684925] dhcpcd[537]: dhcpcd-10.3.2 starting932buildbot # [ 9.689465] systemd[1]: Finished Extra networking commands..933buildbot # [ 9.694577] dhcpcd[596]: dev: loaded udev934buildbot # [ 9.696259] systemd[1]: Reached target Network.935buildbot # [ 9.708305] systemd[1]: Starting Nginx Web Server...936buildbot # [ 9.714771] systemd[1]: Starting PostgreSQL Server...937buildbot # [ 9.763051] systemd[1]: Starting SSH Daemon...938buildbot # [ 9.995322] 8021q: 802.1Q VLAN Support v1.8939buildbot # [ 9.995889] 8021q: adding VLAN 0 to HW filter on device eth1940buildbot # [ 9.768317] systemd[1]: Starting Permit User Sessions...941buildbot # [ 9.851215] systemd[1]: Finished Permit User Sessions.942buildbot # [ 9.864701] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.943buildbot # [ 9.882269] systemd[1]: Started Getty on tty1.944buildbot # [ 9.892266] systemd[1]: Reached target Login Prompts.945buildbot # [ 9.898621] sshd[601]: Server listening on 0.0.0.0 port 22.946buildbot # [ 9.901586] sshd[601]: Server listening on :: port 22.947buildbot # [ 9.905447] systemd[1]: Started SSH Daemon.948buildbot # [ 10.142659] kvm_amd: TSC scaling supported949buildbot # [ 10.152097] kvm_amd: Nested Virtualization enabled950buildbot # [ 10.152782] kvm_amd: Nested Paging enabled951buildbot # [ 10.160250] kvm_amd: LBR virtualization supported952buildbot # [ 9.932175] systemd[1]: Starting Setup git test repository with scheduled effects...953buildbot # [ 10.167053] kvm_amd: Virtual VMLOAD VMSAVE supported954buildbot # [ 10.167728] kvm_amd: Virtual GIF supported955buildbot # [ 10.285143] EDAC MC: Ver: 3.0.0956buildbot # [ 10.293674] cfg80211: Loading compiled-in X.509 certificates for regulatory database957buildbot # [ 10.320009] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'958buildbot # [ 10.320899] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'959buildbot # [ 10.324530] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2960buildbot # [ 10.325742] cfg80211: failed to load regulatory.db961buildbot # [ 10.110931] setup-git-repo-start[618]: hint: Using 'master' as the name for the initial branch. This default branch name962buildbot # [ 10.113193] setup-git-repo-start[618]: hint: will change to "main" in Git 3.0. To configure the initial branch name963buildbot # [ 10.116705] setup-git-repo-start[618]: hint: to use in all of your new repositories, which will suppress this warning,964buildbot # [ 10.119576] setup-git-repo-start[618]: hint: call:965buildbot # [ 10.121490] setup-git-repo-start[618]: hint:966buildbot # [ 10.122991] setup-git-repo-start[618]: hint: git config --global init.defaultBranch <name>967buildbot # [ 10.126279] setup-git-repo-start[618]: hint:968buildbot # [ 10.127172] setup-git-repo-start[618]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and969buildbot # [ 10.130484] setup-git-repo-start[618]: hint: 'development'. The just-created branch can be renamed via this command:970buildbot # [ 10.132744] setup-git-repo-start[618]: hint:971buildbot # [ 10.134959] setup-git-repo-start[618]: hint: git branch -m <name>972buildbot # [ 10.137340] setup-git-repo-start[618]: hint:973buildbot # [ 10.138368] setup-git-repo-start[618]: hint: Disable this message with "git config set advice.defaultBranchName false"974buildbot # [ 10.141610] setup-git-repo-start[618]: Initialized empty Git repository in /srv/repos/test-flake.git/975buildbot # [ 10.174189] systemd-vconsole-setup[571]: Configuration of first virtual console was skipped, ignoring remaining ones.976buildbot # [ 10.179440] postgresql-pre-start[615]: The files belonging to this database system will be owned by user "postgres".977buildbot # [ 10.182488] postgresql-pre-start[615]: This user must also own the server process.978buildbot # [ 10.186791] systemd[1]: Finished Virtual Console Setup.979buildbot # [ 10.189884] postgresql-pre-start[615]: The database cluster will be initialized with locale "en_US.UTF-8".980buildbot # [ 10.193130] postgresql-pre-start[615]: The default database encoding has accordingly been set to "UTF8".981buildbot # [ 10.195249] postgresql-pre-start[615]: The default text search configuration will be set to "english".982buildbot # [ 10.197178] postgresql-pre-start[615]: Data page checksums are enabled.983buildbot # [ 10.199649] postgresql-pre-start[615]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok984buildbot # [ 10.202619] postgresql-pre-start[615]: creating subdirectories ... ok985buildbot # [ 10.204608] postgresql-pre-start[615]: selecting dynamic shared memory implementation ... posix986buildbot # [ 10.207282] setup-git-repo-start[631]: hint: Using 'master' as the name for the initial branch. This default branch name987buildbot # [ 10.210784] setup-git-repo-start[631]: hint: will change to "main" in Git 3.0. To configure the initial branch name988buildbot # [ 10.212978] setup-git-repo-start[631]: hint: to use in all of your new repositories, which will suppress this warning,989buildbot # [ 10.215268] setup-git-repo-start[631]: hint: call:990buildbot # [ 10.217174] setup-git-repo-start[631]: hint:991buildbot # [ 10.218385] setup-git-repo-start[631]: hint: git config --global init.defaultBranch <name>992buildbot # [ 10.220240] setup-git-repo-start[631]: hint:993buildbot # [ 10.221912] setup-git-repo-start[631]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and994buildbot # [ 10.223798] setup-git-repo-start[631]: hint: 'development'. The just-created branch can be renamed via this command:995buildbot # [ 10.227134] setup-git-repo-start[631]: hint:996buildbot # [ 10.227959] setup-git-repo-start[631]: hint: git branch -m <name>997buildbot # [ 10.231062] setup-git-repo-start[631]: hint:998buildbot # [ 10.231900] setup-git-repo-start[631]: hint: Disable this message with "git config set advice.defaultBranchName false"999buildbot # [ 10.234602] setup-git-repo-start[631]: Initialized empty Git repository in /tmp/test-flake/.git/1000buildbot # [ 10.238254] nginx-pre-start[613]: nginx: the configuration file /nix/store/fm5b2jl7kjzxkkc7bzkzis1prdivs6hz-nginx.conf syntax is ok1001buildbot # [ 10.241236] nginx-pre-start[613]: nginx: configuration file /nix/store/fm5b2jl7kjzxkkc7bzkzis1prdivs6hz-nginx.conf test is successful1002buildbot # [ 10.477332] 8021q: adding VLAN 0 to HW filter on device eth01003buildbot # [ 10.249247] dhcpcd[596]: eth0: waiting for carrier1004buildbot # [ 10.251354] dhcpcd[596]: eth0: carrier acquired1005buildbot # [ 10.255077] systemd[1]: Started Nginx Web Server.1006buildbot # [ 10.267838] dhcpcd[596]: DUID 00:01:00:01:32:2f:cd:7c:52:54:00:12:34:561007buildbot # [ 10.269394] dhcpcd[596]: eth0: IAID 00:12:34:561008buildbot # [ 10.270476] dhcpcd[596]: eth0: adding address fe80::5054:ff:fe12:34561009buildbot # [ 10.308896] setup-git-repo-start[644]: [master (root-commit) ab9166e] Initial commit with scheduled effects1010buildbot # [ 10.312102] setup-git-repo-start[644]: 3 files changed, 131 insertions(+)1011buildbot # [ 10.313842] setup-git-repo-start[644]: create mode 100644 effects-lib.nix1012buildbot # [ 10.315729] setup-git-repo-start[644]: create mode 100644 flake.lock1013buildbot # [ 10.316964] setup-git-repo-start[644]: create mode 100644 flake.nix1014buildbot # [ 10.356779] postgresql-pre-start[615]: selecting default "max_connections" ... 1001015buildbot: (finished: waiting for unit sshd.service, in 11.50 seconds)1016buildbot: waiting for unit setup-git-repo.service1017buildbot # [ 10.440280] setup-git-repo-start[654]: To /srv/repos/test-flake.git1018buildbot # [ 10.442484] setup-git-repo-start[654]: * [new branch] master -> master1019buildbot # [ 10.445202] setup-git-repo-start[654]: branch 'master' set up to track 'origin/master'.1020buildbot # [ 10.461613] postgresql-pre-start[615]: selecting default "shared_buffers" ... 128MB1021buildbot # [ 10.468515] systemd[1]: Finished Setup git test repository with scheduled effects.1022buildbot: (finished: waiting for unit setup-git-repo.service, in 1.11 seconds)1023buildbot: waiting for unit multi-user.target1024buildbot # [ 11.519293] dhcpcd[596]: eth0: soliciting a DHCP lease1025buildbot # [ 11.766345] NET: Registered PF_PACKET protocol family1026buildbot # [ 11.540663] dhcpcd[596]: eth0: offered 10.0.2.15 from 10.0.2.21027buildbot # [ 11.543264] dhcpcd[596]: eth0: probing address 10.0.2.15/241028buildbot # [ 11.763463] postgresql-pre-start[615]: selecting default time zone ... UTC1029buildbot # [ 11.767165] postgresql-pre-start[615]: creating configuration files ... ok1030buildbot # [ 11.965165] postgresql-pre-start[615]: running bootstrap script ... ok1031buildbot # [ 12.422458] dhcpcd[596]: eth0: soliciting an IPv6 router1032buildbot # [ 12.425134] dhcpcd[596]: eth0: Router Advertisement from fe80::21033buildbot # [ 12.426525] dhcpcd[596]: eth0: adding address fec0::5054:ff:fe12:3456/641034buildbot # [ 12.427850] dhcpcd[596]: eth0: adding route to fec0::/641035buildbot # [ 12.429266] dhcpcd[596]: eth0: adding default route via fe80::21036buildbot # [ 12.503425] postgresql-pre-start[615]: performing post-bootstrap initialization ... ok1037buildbot # [ 12.699629] postgresql-pre-start[615]: syncing data to disk ... ok1038buildbot # [ 12.701117] postgresql-pre-start[615]: initdb: warning: enabling "trust" authentication for local connections1039buildbot # [ 12.703484] postgresql-pre-start[615]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1040buildbot # [ 12.707330] postgresql-pre-start[615]: Success. You can now start the database server using:1041buildbot # [ 12.709100] postgresql-pre-start[615]: pg_ctl -D /var/lib/postgresql/18 -l logfile start1042buildbot # [ 12.793278] postgres[705]: [705] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1043buildbot # [ 12.801502] postgres[705]: [705] LOG: listening on IPv6 address "::1", port 54321044buildbot # [ 12.803194] postgres[705]: [705] LOG: listening on IPv4 address "127.0.0.1", port 54321045buildbot # [ 12.805461] postgres[705]: [705] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1046buildbot # [ 12.816487] postgres[714]: [714] LOG: database system was shut down at 2026-09-06 07:06:38 GMT1047buildbot # [ 12.820508] postgres[705]: [705] LOG: database system is ready to accept connections1048buildbot # [ 12.824475] systemd[1]: Started PostgreSQL Server.1049buildbot # [ 12.831290] systemd[1]: Starting PostgreSQL Setup Scripts...1050buildbot # [ 12.977881] postgresql-setup-start[725]: CREATE DATABASE1051buildbot # [ 13.012995] postgresql-setup-start[730]: CREATE ROLE1052buildbot # [ 13.030543] postgresql-setup-start[732]: ALTER DATABASE1053buildbot # [ 13.034734] systemd[1]: Finished PostgreSQL Setup Scripts.1054buildbot # [ 13.037090] systemd[1]: Reached target PostgreSQL.1055buildbot # [ 13.040620] systemd[1]: Starting Buildbot Continuous Integration Server....1056buildbot # [ 13.077924] buildbot-master-pre-start[737]: mkdir: created directory '/var/lib/buildbot/master'1057buildbot # [ 16.493749] dhcpcd[596]: eth0: leased 10.0.2.15 for 86400 seconds1058buildbot # [ 16.495895] dhcpcd[596]: eth0: adding route to 10.0.2.0/241059buildbot # [ 16.498147] dhcpcd[596]: eth0: adding default route via 10.0.2.21060buildbot # [ 16.593579] systemd[1]: Started DHCP Client.1061buildbot # [ 17.288490] buildbot-master-pre-start[739]: updating existing installation1062buildbot # [ 17.291264] buildbot-master-pre-start[739]: not touching existing buildbot.tac1063buildbot # [ 17.292742] buildbot-master-pre-start[739]: creating buildbot.tac.new instead1064buildbot # [ 17.294250] buildbot-master-pre-start[739]: creating /var/lib/buildbot/master/master.cfg.sample1065buildbot # [ 17.295917] buildbot-master-pre-start[739]: creating database (postgresql://@/buildbot)1066buildbot # [ 17.297574] buildbot-master-pre-start[739]: buildmaster configured in /var/lib/buildbot/master1067buildbot # [ 17.637182] systemd[1]: Started Buildbot Continuous Integration Server..1068buildbot # [ 17.643794] systemd[1]: Started Buildbot Worker..1069buildbot # [ 17.644878] systemd[1]: Reached target Multi-User System.1070buildbot # [ 17.647171] systemd[1]: Startup finished in 1.011s (kernel) + 4.746s (initrd) + 11.889s (userspace) = 17.647s.1071buildbot: (finished: waiting for unit multi-user.target, in 6.54 seconds)1072subtest: Master and worker services start1073buildbot: waiting for unit buildbot-master.service1074buildbot: (finished: waiting for unit buildbot-master.service, in 0.06 seconds)1075buildbot: waiting for unit buildbot-worker.service1076buildbot: (finished: waiting for unit buildbot-worker.service, in 0.06 seconds)1077buildbot: waiting for TCP port 8010 on localhost1078buildbot # [ 18.943831] twistd[843]: Starting worker local-worker-0001079buildbot # [ 18.945768] twistd[843]: 2026-09-06T07:06:44+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1080buildbot # [ 18.949410] twistd[843]: 2026-09-06T07:06:44+0000 [-] Loaded.1081buildbot # [ 18.950940] twistd[843]: 2026-09-06T07:06:44+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up.1082buildbot # [ 18.954329] twistd[843]: 2026-09-06T07:06:44+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1083buildbot # [ 18.958164] twistd[843]: 2026-09-06T07:06:44+0000 [-] Starting Worker -- version: 2026.09.061084buildbot # [ 18.960262] twistd[843]: 2026-09-06T07:06:44+0000 [-] recording hostname in twistd.hostname1085buildbot # [ 18.962198] twistd[843]: 2026-09-06T07:06:44+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742292818050>1086buildbot # [ 18.972622] twistd[843]: 2026-09-06T07:06:44+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x742292818590> in 1.5163568782986696 seconds.1087buildbot # [ 18.976449] twistd[843]: 2026-09-06T07:06:44+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x742292818050>1088buildbot # [ 20.407187] twistd[842]: 2026-09-06T07:06:44+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1089buildbot # [ 20.409609] twistd[842]: 2026-09-06T07:06:46+0000 [-] Loaded.1090buildbot # [ 20.410729] twistd[842]: 2026-09-06T07:06:46+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14 3.14.7) starting up.1091buildbot # [ 20.413752] twistd[842]: 2026-09-06T07:06:46+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1092buildbot # [ 20.416140] twistd[842]: 2026-09-06T07:06:46+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01093buildbot # [ 20.424468] twistd[842]: 2026-09-06T07:06:46+0000 [-] Loading configuration from '/nix/store/6m528szw698gvgsikn6qm15ww7fgxlr9-master.cfg'1094buildbot # [ 20.495352] twistd[843]: 2026-09-06T07:06:46+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742292818050>1095buildbot # [ 20.499950] twistd[843]: 2026-09-06T07:06:46+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x742292818590> in 2.8851530917273207 seconds.1096buildbot # [ 20.503528] twistd[843]: 2026-09-06T07:06:46+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x742292818050>1097buildbot # [ 21.079110] twistd[842]: 2026-09-06T07:06:47+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1098buildbot # [ 21.166102] twistd[842]: 2026-09-06T07:06:47+0000 [-] adding 9 new builders, removing 01099buildbot # [ 21.387848] twistd[842]: 2026-09-06T07:06:47+0000 [-] adding 3 new services, removing 01100buildbot # [ 21.523583] twistd[842]: 2026-09-06T07:06:47+0000 [-] adding 1 new change_sources, removing 01101buildbot # [ 21.528846] twistd[842]: 2026-09-06T07:06:47+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1102buildbot # [ 21.537759] twistd[842]: 2026-09-06T07:06:47+0000 [-] adding 14 new schedulers, removing 01103buildbot # [ 21.700913] twistd[842]: 2026-09-06T07:06:47+0000 [-] BuildbotSite starting on 80101104buildbot # [ 21.704751] twistd[842]: 2026-09-06T07:06:47+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x78ddfff8cd70>1105buildbot # [ 21.707657] twistd[842]: 2026-09-06T07:06:47+0000 [-] adding 5 new workers, removing 01106buildbot # [ 21.723786] twistd[842]: 2026-09-06T07:06:47+0000 [-] PBServerFactory starting on 99891107buildbot # [ 21.726141] twistd[842]: 2026-09-06T07:06:47+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x78ddfff8d7f0>1108buildbot # [ 21.754137] twistd[842]: 2026-09-06T07:06:47+0000 [-] Starting Worker -- version: 2026.09.061109buildbot # [ 21.755880] twistd[842]: 2026-09-06T07:06:47+0000 [-] recording hostname in twistd.hostname1110buildbot # [ 21.757445] twistd[842]: 2026-09-06T07:06:47+0000 [-] message from master: attached1111buildbot # [ 21.760090] twistd[842]: 2026-09-06T07:06:47+0000 [-] Got workerinfo from '__Janitor'1112buildbot # [ 21.770139] twistd[842]: 2026-09-06T07:06:47+0000 [-] bot attached1113buildbot # [ 21.771909] twistd[842]: 2026-09-06T07:06:47+0000 [-] Worker __Janitor attached to __Janitor1114buildbot # [ 21.773932] twistd[842]: 2026-09-06T07:06:47+0000 [-] message from master: attached1115buildbot # [ 21.819207] sshd-session[902]: Accepted publickey for root from ::1 port 58570 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81116buildbot # [ 21.822557] twistd[842]: 2026-09-06T07:06:47+0000 [-] BuildMaster is running1117buildbot # [ 21.832661] sshd-session[902]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1118buildbot # [ 21.864363] systemd-logind[447]: New session '1' of user 'root' with class 'user' and type 'tty'.1119buildbot # [ 21.869426] systemd[1]: Created slice Slice /user/0.1120buildbot # [ 21.872543] systemd[1]: Starting User Runtime Directory /run/user/0...1121buildbot # [ 21.903060] systemd[1]: Finished User Runtime Directory /run/user/0.1122buildbot # [ 21.908170] systemd[1]: Starting User Manager for UID 0...1123buildbot # [ 21.934959] (systemd)[908]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1124buildbot # [ 21.940657] systemd-logind[447]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1125buildbot # [ 22.006508] systemd[908]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1126buildbot # [ 22.174833] systemd[908]: Queued start job for default target Main User Target.1127buildbot # [ 22.177674] systemd[908]: Failed to adjust io pressure threshold, ignoring: Device or resource busy1128buildbot # [ 22.180581] systemd[908]: Created slice User Application Slice.1129buildbot # [ 22.181906] systemd[908]: Started Daily Cleanup of User's Temporary Directories.1130buildbot # [ 22.183498] systemd[908]: Reached target Paths.1131buildbot # [ 22.185335] systemd[908]: Reached target Timers.1132buildbot # [ 22.188055] systemd[908]: Starting D-Bus User Message Bus Socket...1133buildbot # [ 22.190191] systemd[908]: Starting Create User Files and Directories...1134buildbot # [ 22.240691] systemd[908]: Finished Create User Files and Directories.1135buildbot # [ 22.269369] systemd[908]: Listening on D-Bus User Message Bus Socket.1136buildbot # [ 22.271350] systemd[908]: Reached target Sockets.1137buildbot # [ 22.272870] systemd[908]: Reached target Basic System.1138buildbot # [ 22.274979] systemd[908]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1139buildbot # [ 22.278633] systemd[908]: Reached target Main User Target.1140buildbot # [ 22.279948] systemd[908]: Startup finished in 315ms.1141buildbot # [ 22.282066] systemd[1]: Started User Manager for UID 0.1142buildbot # [ 22.283421] systemd[1]: Started Session 1 of User root.1143buildbot # [ 22.309623] sshd-session[921]: Received disconnect from ::1 port 58570:11: disconnected by user1144buildbot # [ 22.311459] sshd-session[921]: Disconnected from user root ::1 port 585701145buildbot # [ 22.312855] sshd-session[902]: pam_unix(sshd:session): session closed for user root1146buildbot # [ 22.317838] systemd[1]: session-1.scope: Deactivated successfully.1147buildbot # [ 22.323564] systemd-logind[447]: Session 1 logged out. Waiting for processes to exit.1148buildbot # [ 22.326624] systemd-logind[447]: Removed session 1.1149buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1150buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.21 seconds)1151??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1152 File "/nix/store/wqwvv2w9ih8r1f0lsa0h3fqf91nblq7g-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391153buildbot: waiting for success: curl --fail --head http://localhost:80101154??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead.1155 File "/nix/store/wqwvv2w9ih8r1f0lsa0h3fqf91nblq7g-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 391156buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1157buildbot # Dload Upload Total Spent Left Speed1158buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01159buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.12 seconds)1160(finished: subtest: Master and worker services start, in 4.44 seconds)1161subtest: Project is registered1162buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1163buildbot # [ 22.513905] sshd-session[930]: Accepted publickey for root from ::1 port 58586 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81164buildbot # [ 22.527245] sshd-session[930]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1165buildbot # % Total % Received % Xferd Average S[ 22.541756] systemd-logind[447]: New session '3' of user 'root' with class 'user' and type 'tty'.1166buildbot # peed [ 22.544748] systemd[1]: Started Session 3 of User root.1167buildbot # Time Time Time Current1168buildbot # Dload Upload Total Spent Left Speed1169buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 4986 0 0100 266 100 266 0 0 3998 0 [ 22.610298] sshd-session[941]: Received disconnect from ::1 port 58586:11: disconnected by user1170buildbot # [ 22.613542] sshd-session[941]: Disconnected from user root ::1 port 585861171buildbot # [ 22.616170] sshd-session[930]: pam_unix(sshd:session): session closed for user root1172buildbot # [ 22.619461] systemd[1]: session-3.scope: Deactivated successfully.1173buildbot # [ 22.624878] systemd-logind[447]: Session 3 logged out. Waiting for processes to exit.1174buildbot # 0100 [ 22.628080] systemd-logind[447]: Removed session 3.1175buildbot # 266 100 266 0 0 2746 0 01176buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.16 seconds)1177(finished: subtest: Project is registered, in 0.16 seconds)1178subtest: CLI list-schedules works1179buildbot: must succeed: 1180 cd /tmp/test-flake1181 buildbot-effects list-schedules1182 1183buildbot # [ 22.663446] twistd[842]: 2026-09-06T07:06:48+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1184buildbot: (finished: must succeed: 1185 cd /tmp/test-flake1186 buildbot-effects list-schedules1187 , in 0.38 seconds)1188(finished: subtest: CLI list-schedules works, in 0.38 seconds)1189subtest: Push a new commit to trigger build1190buildbot: must succeed: 1191 cd /tmp/test-flake1192 echo "# trigger rebuild" >> flake.nix1193 git add flake.nix1194 git commit -m "Trigger build"1195 git push origin master1196 1197buildbot # Enumerating objects: 5, done.1198buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1199buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1200buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done.1201buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1202buildbot # To /srv/repos/test-flake.git1203buildbot # ab9166e..d816537 master -> master1204buildbot: (finished: must succeed: 1205 cd /tmp/test-flake1206 echo "# trigger rebuild" >> flake.nix1207 git add flake.nix1208 git commit -m "Trigger build"1209 git push origin master1210 , in 0.08 seconds)1211(finished: subtest: Push a new commit to trigger build, in 0.08 seconds)1212subtest: Wait for nix-eval build to complete1213??? Warning (UserWarning): retry(): The 'timeout_seconds' argument is deprecated. Use 'timeout' instead.1214 File "/nix/store/wqwvv2w9ih8r1f0lsa0h3fqf91nblq7g-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/machine/__init__.py", line 1281215buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1216buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1217buildbot # Dload Upload Total Spent Left Speed1218buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1705 0 0100 51 100 51 0 0 1341 0 0100 51 100 51 0 0 1111 0 01219buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1220buildbot # [ 23.390110] twistd[843]: 2026-09-06T07:06:49+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x742292818050>1221buildbot # [ 23.397449] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=39768)1222buildbot # [ 23.401304] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1223buildbot # [ 23.406875] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1224buildbot # [ 23.414605] twistd[842]: 2026-09-06T07:06:49+0000 [-] bot attached1225buildbot # [ 23.419082] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1226buildbot # [ 23.421165] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1227buildbot # [ 23.423382] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1228buildbot # [ 23.425374] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1229buildbot # [ 23.431092] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1230buildbot # [ 23.433526] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1231buildbot # [ 23.435719] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1232buildbot # [ 23.437875] twistd[842]: 2026-09-06T07:06:49+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1233buildbot # [ 23.440512] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1234buildbot # [ 23.443167] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1235buildbot # [ 23.445231] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1236buildbot # [ 23.447262] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1237buildbot # [ 23.449254] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1238buildbot # [ 23.451521] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1239buildbot # [ 23.453620] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1240buildbot # [ 23.455197] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] message from master: attached1241buildbot # [ 23.476335] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] Connected to buildmaster; worker is ready1242buildbot # [ 23.478142] twistd[843]: 2026-09-06T07:06:49+0000 [Broker,client] sending application-level keepalives every 600 seconds1243buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1244buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1245buildbot # Dload Upload Total Spent Left Speed1246buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1823 0 0100 51 100 51 0 0 1423 0 0100 51 100 51 0 0 1169 0 01247buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1248buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1249buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1250buildbot # Dload Upload Total Spent Left Speed1251buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1562 0 0100 51 100 51 0 0 1237 0 0100 51 100 51 0 0 1030 0 01252buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1253buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1254buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1255buildbot # Dload Upload Total Spent Left Speed1256buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1646 0 0100 51 100 51 0 0 1312 0 0100 51 100 51 0 0 1089 0 01257buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1258buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1259buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1260buildbot # Dload Upload Total Spent Left Speed1261buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1857 0 0100 51 100 51 0 0 1450 0 0100 51 100 51 0 0 1194 0 01262buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1263buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1264buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1265buildbot # Dload Upload Total Spent Left Speed1266buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1852 0 0100 51 100 51 0 0 1403 0 0100 51 100 51 0 0 1154 0 01267buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1268buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1269buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1270buildbot # Dload Upload Total Spent Left Speed1271buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1658 0 0100 51 100 51 0 0 1311 0 0100 51 100 51 0 0 1095 0 01272buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1273buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1274buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1275buildbot # Dload Upload Total Spent Left Speed1276buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1457 0 0100 51 100 51 0 0 1133 0 0100 51 100 51 0 0 931 0 01277buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1278buildbot # [ 31.708895] sshd-session[1017]: Accepted publickey for root from ::1 port 49676 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81279buildbot # [ 31.720681] sshd-session[1017]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1280buildbot # [ 31.731224] systemd-logind[447]: New session '4' of user 'root' with class 'user' and type 'tty'.1281buildbot # [ 31.734415] systemd[1]: Started Session 4 of User root.1282buildbot # [ 31.764424] sshd-session[1020]: Received disconnect from ::1 port 49676:11: disconnected by user1283buildbot # [ 31.766826] sshd-session[1020]: Disconnected from user root ::1 port 496761284buildbot # [ 31.769839] sshd-session[1017]: pam_unix(sshd:session): session closed for user root1285buildbot # [ 31.777209] systemd[1]: session-4.scope: Deactivated successfully.1286buildbot # [ 31.780770] systemd-logind[447]: Session 4 logged out. Waiting for processes to exit.1287buildbot # [ 31.783369] systemd-logind[447]: Removed session 4.1288buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1289buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1290buildbot # Dload Upload Total Spent Left Speed1291buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1560 0 0100 51 100 51 0 0 1254 0 0100 51 100 51 0 0 1052 0 01292buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1293buildbot # [ 31.967600] sshd-session[1028]: Accepted publickey for root from ::1 port 49688 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81294buildbot # [ 31.975847] sshd-session[1028]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1295buildbot # [ 31.982192] systemd-logind[447]: New session '5' of user 'root' with class 'user' and type 'tty'.1296buildbot # [ 31.986240] systemd[1]: Started Session 5 of User root.1297buildbot # [ 32.015332] sshd-session[1031]: Received disconnect from ::1 port 49688:11: disconnected by user1298buildbot # [ 32.017626] sshd-session[1031]: Disconnected from user root ::1 port 496881299buildbot # [ 32.020336] sshd-session[1028]: pam_unix(sshd:session): session closed for user root1300buildbot # [ 32.024100] systemd[1]: session-5.scope: Deactivated successfully.1301buildbot # [ 32.026908] systemd-logind[447]: Session 5 logged out. Waiting for processes to exit.1302buildbot # [ 32.030483] systemd-logind[447]: Removed session 5.1303buildbot # [ 32.044210] twistd[842]: 2026-09-06T07:06:57+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1304buildbot # [ 32.067865] twistd[842]: 2026-09-06T07:06:58+0000 [-] gitpoller: processing 1 changes: ['d8165372d2c17d76768a6301e978787d796e7c4a'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1305buildbot # [ 32.136666] twistd[842]: 2026-09-06T07:06:58+0000 [-] added change with revision d8165372d2c17d76768a6301e978787d796e7c4a to database1306buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1307buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1308buildbot # Dload Upload Total Spent Left Speed1309buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1853 0 0100 51 100 51 0 0 1430 0 0100 51 100 51 0 0 1175 0 01310buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1311buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1312buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1313buildbot # Dload Upload Total Spent Left Speed1314buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1737 0 0100 51 100 51 0 0 1356 0 0100 51 100 51 0 0 1112 0 01315buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1316buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1317buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1318buildbot # Dload Upload Total Spent Left Speed1319buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1492 0 0100 51 100 51 0 0 1149 0 0100 51 100 51 0 0 965 0 01320buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1321buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1322buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1323buildbot # Dload Upload Total Spent Left Speed1324buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1754 0 0100 51 100 51 0 0 1394 0 0100 51 100 51 0 0 1158 0 01325buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1326buildbot # [ 37.170813] twistd[842]: 2026-09-06T07:07:03+0000 [-] added buildset 1 to database1327buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1328buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1329buildbot # Dload Upload Total Spent Left Speed1330buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1214 0 0100 51 100 51 0 0 946 0 0100 51 100 [ 37.348158] twistd[842]: 2026-09-06T07:07:03+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1331buildbot # [ 37.351824] twistd[842]: 2026-09-06T07:07:03+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1332buildbot # 51 0 0 765 0 01333buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1334buildbot # [ 37.412743] twistd[842]: 2026-09-06T07:07:03+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1335buildbot # [ 37.418689] twistd[842]: 2026-09-06T07:07:03+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1336buildbot # [ 37.423602] twistd[842]: 2026-09-06T07:07:03+0000 [-] sending ping1337buildbot # [ 37.426946] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] message from master: ping1338buildbot # [ 37.429172] twistd[842]: 2026-09-06T07:07:03+0000 [Broker,0,127.0.0.1] ping finished: success1339buildbot # [ 37.455122] twistd[842]: 2026-09-06T07:07:03+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1340buildbot # [ 37.458541] twistd[842]: 2026-09-06T07:07:03+0000 [-] command '['git', '--version']' in dir 'build'1341buildbot # [ 37.462467] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 0): startCommand:shell1342buildbot # [ 37.465774] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1343buildbot # [ 37.468567] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '--version']): git --version1344buildbot # [ 37.471501] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1345buildbot # [ 37.475560] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1346buildbot # [ 37.480094] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1347buildbot # [ 37.482908] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '--version']): using PTY: False1348buildbot # [ 37.497090] twistd[843]: 2026-09-06T07:07:03+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0180491349buildbot # [ 37.500898] twistd[843]: 2026-09-06T07:07:03+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x74229281a7b0>1350buildbot # [ 37.533146] twistd[842]: 2026-09-06T07:07:03+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01351buildbot # [ 37.565463] twistd[842]: 2026-09-06T07:07:03+0000 [-] <RemoteCommand 'stat' at 132894825531776>: RemoteCommand.run [1]1352buildbot # [ 37.579098] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 1): startCommand:stat1353buildbot # [ 37.581148] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1354buildbot # [ 37.587430] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x742292ef7b60>1355buildbot # [ 37.592592] twistd[842]: 2026-09-06T07:07:03+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132894825531776> rc=21356buildbot # [ 37.609148] twistd[842]: 2026-09-06T07:07:03+0000 [-] <RemoteCommand 'mkdir' at 132894825674896>: RemoteCommand.run [2]1357buildbot # [ 37.638129] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 2): startCommand:mkdir1358buildbot # [ 37.640699] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x742292819010>1359buildbot # [ 37.646178] twistd[842]: 2026-09-06T07:07:03+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 132894825674896> rc=01360buildbot # [ 37.654735] twistd[842]: 2026-09-06T07:07:03+0000 [-] <RemoteCommand 'downloadFile' at 132894825675856>: RemoteCommand.run [3]1361buildbot # [ 37.691359] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 3): startCommand:downloadFile1362buildbot # [ 37.696635] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x742292818d70>1363buildbot # [ 37.702174] twistd[842]: 2026-09-06T07:07:03+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 132894825675856> rc=01364buildbot # [ 37.711152] twistd[842]: 2026-09-06T07:07:03+0000 [-] <RemoteCommand 'listdir' at 132894825676176>: RemoteCommand.run [4]1365buildbot # [ 37.747140] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 4): startCommand:listdir1366buildbot # [ 37.749702] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x742292818c20>1367buildbot # [ 37.753941] twistd[842]: 2026-09-06T07:07:03+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 132894825676176> rc=01368buildbot # [ 37.762168] twistd[842]: 2026-09-06T07:07:03+0000 [-] No git repo present, making full clone1369buildbot # [ 37.763972] twistd[842]: 2026-09-06T07:07:03+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1370buildbot # [ 37.769572] twistd[842]: 2026-09-06T07:07:03+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1371buildbot # [ 37.798375] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command 5): startCommand:shell1372buildbot # [ 37.800598] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1373buildbot # [ 37.806169] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1374buildbot # [ 37.821232] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1375buildbot # [ 37.827236] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1376buildbot # [ 37.832274] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1377buildbot # [ 37.839723] twistd[843]: 2026-09-06T07:07:03+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1378buildbot # [ 38.011456] sshd-session[1067]: Accepted publickey for root from ::1 port 53516 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81379buildbot # [ 38.021159] sshd-session[1067]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1380buildbot # [ 38.028897] systemd-logind[447]: New session '6' of user 'root' with class 'user' and type 'tty'.1381buildbot # [ 38.033415] systemd[1]: Started Session 6 of User root.1382buildbot # [ 38.076584] sshd-session[1070]: Received disconnect from ::1 port 53516:11: disconnected by user1383buildbot # [ 38.079305] sshd-session[1070]: Disconnected from user root ::1 port 535161384buildbot # [ 38.081335] sshd-session[1067]: pam_unix(sshd:session): session closed for user root1385buildbot # [ 38.086977] systemd[1]: session-6.scope: Deactivated successfully.1386buildbot # [ 38.091179] systemd-logind[447]: Session 6 logged out. Waiting for processes to exit.1387buildbot # [ 38.093591] systemd-logind[447]: Removed session 6.1388buildbot # [ 38.104099] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.2884141389buildbot # [ 38.109598] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7422927d16d0>1390buildbot # [ 38.114534] twistd[842]: 2026-09-06T07:07:04+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01391buildbot # [ 38.139076] twistd[842]: 2026-09-06T07:07:04+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']'>: RemoteCommand.run [6]1392buildbot # [ 38.143569] twistd[842]: 2026-09-06T07:07:04+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']' in dir 'build'1393buildbot # [ 38.148868] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command 6): startCommand:shell1394buildbot # [ 38.151130] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): RunProcess._startCommand1395buildbot # [ 38.155777] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f d8165372d2c17d76768a6301e978787d796e7c4a1396buildbot # [ 38.163580] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1397buildbot # [ 38.171944] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): watching logfiles {}1398buildbot # [ 38.177276] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'd8165372d2c17d76768a6301e978787d796e7c4a']1399buildbot # [ 38.184623] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): using PTY: False1400buildbot # [ 38.203451] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']): command finished with signal None, exit code 0, elapsedTime: 0.0325581401buildbot # [ 38.209731] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7422927d2850>1402buildbot # [ 38.234340] twistd[842]: 2026-09-06T07:07:04+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd8165372d2c17d76768a6301e978787d796e7c4a']'> rc=01403buildbot # [ 38.256907] twistd[842]: 2026-09-06T07:07:04+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1404buildbot # [ 38.261169] twistd[842]: 2026-09-06T07:07:04+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1405buildbot # [ 38.268074] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command 7): startCommand:shell1406buildbot # [ 38.270940] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1407buildbot # [ 38.276582] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1408buildbot # [ 38.282956] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1409buildbot # [ 38.288057] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1410buildbot # [ 38.293583] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1411buildbot # [ 38.299941] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1412buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1413buildbot # [ 38.396510] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1036281414buildbot # [ 38.402565] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292dc6780>1415buildbot # [ 38.408397] twistd[842]: 2026-09-06T07:07:04+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01416buildbot # % Total % Received % Xferd Average Speed Time Ti[ 38.443349] twistd[842]: 2026-09-06T07:07:04+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1417buildbot # [ 38.445476] twistd[842]: 2026-09-06T07:07:04+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1418buildbot # [ 38.448262] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command 8): startCommand:shell1419buildbot # me Time Cur[ 38.453465] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1420buildbot # [ 38.455606] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1421buildbot # [ 38.457649] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1422buildbot # [ 38.460681] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1423buildbot # rent1424buildbot # [ 38.464257] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1425buildbot # [ 38.466552] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1426buildbot # Dload Upload Total Spent Left Speed1427buildbot # 0 0 0 0 0 0 0 0 [ 38.495127] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0399021428buildbot # [ 38.498534] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292dc68b0>1429buildbot # 0100 401 100 401 0 0 5158 0 0100 401 100 [ 38.524083] twistd[842]: 2026-09-06T07:07:04+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01430buildbot # 401 0 0 4523 0 0100 401 100 401 0 0 3776 0 01431buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.19 seconds)1432buildbot # [ 38.562125] twistd[842]: 2026-09-06T07:07:04+0000 [-] Got Git revision d8165372d2c17d76768a6301e978787d796e7c4a1433buildbot # [ 38.564742] twistd[842]: 2026-09-06T07:07:04+0000 [-] <RemoteCommand 'rmdir' at 132894826233936>: RemoteCommand.run [9]1434buildbot # [ 38.571089] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command 9): startCommand:rmdir1435buildbot # [ 38.573150] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1436buildbot # [ 38.576415] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1437buildbot # [ 38.580416] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1438buildbot # [ 38.586267] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1439buildbot # [ 38.589315] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1440buildbot # [ 38.593421] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1441buildbot # [ 38.607208] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0222181442buildbot # [ 38.611935] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x74229281b380>1443buildbot # [ 38.640810] twistd[842]: 2026-09-06T07:07:04+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 132894826233936> rc=01444buildbot # [ 38.658699] twistd[842]: 2026-09-06T07:07:04+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1445buildbot # [ 38.680728] twistd[842]: 2026-09-06T07:07:04+0000 [-] step 'git' complete: success (None)1446buildbot # [ 38.689068] twistd[842]: 2026-09-06T07:07:04+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x78de16b89940>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x78de16b8acf0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x78de16b8acf0>)])1447buildbot # [ 38.708615] twistd[842]: 2026-09-06T07:07:04+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1448buildbot # [ 38.711301] twistd[842]: 2026-09-06T07:07:04+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1449buildbot # [ 38.714513] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command 10): startCommand:shell1450buildbot # [ 38.718081] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1451buildbot # [ 38.720715] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1452buildbot # [ 38.723875] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1453buildbot # [ 38.727376] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1454buildbot # [ 38.731873] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1455buildbot # [ 38.735352] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1456buildbot # [ 38.752570] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0216081457buildbot # [ 38.756740] twistd[843]: 2026-09-06T07:07:04+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292de6e70>1458buildbot # [ 38.783201] twistd[842]: 2026-09-06T07:07:04+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01459buildbot # [ 38.790713] twistd[842]: 2026-09-06T07:07:04+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1460buildbot # [ 38.797518] twistd[842]: 2026-09-06T07:07:04+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1461buildbot # [ 38.829529] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command 11): startCommand:shell1462buildbot # [ 38.831844] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1463buildbot # [ 38.838482] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1464buildbot # [ 38.847925] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1465buildbot # [ 38.855106] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1466buildbot # [ 38.861262] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1467buildbot # [ 38.872953] twistd[843]: 2026-09-06T07:07:04+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1468buildbot # [ 39.080308] systemd[1]: Started Nix Daemon.1469buildbot # [ 39.153678] nix-daemon[1114]: accepted connection from pid 1111, user buildbot-worker1470buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1471buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1472buildbot # Dload Upload Total Spent Left Speed1473buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14019 0 0100 401 100 401 0 0 10838 0 0100 401 100 401 0 0 8883 0 01474buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1475buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1476buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1477buildbot # Dload Upload Total Spent Left Speed1478buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 13500 0 0100 401 100 401 0 0 10459 0 0100 401 100 401 0 0 8630 0 01479buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1480buildbot # [ 41.712585] sshd-session[1131]: Accepted publickey for root from ::1 port 53530 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81481buildbot # [ 41.722556] sshd-session[1131]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1482buildbot # [ 41.732298] systemd-logind[447]: New session '7' of user 'root' with class 'user' and type 'tty'.1483buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1484buildbot # [ 41.736474] systemd[1]: Started Session 7 of User root.1485buildbot # [ 41.768663] sshd-session[1136]: Received disconnect from ::1 port 53530:11: disconnected by user1486buildbot # [ 41.773320] sshd-session[1136]: Disconnected from user root ::1 port 535301487buildbot # [ 41.776360] sshd-session[1131]: pam_unix(sshd:session): session closed for user root1488buildbot # [ 41.780316] systemd[1]: session-7.scope: Deactivated successfully.1489buildbot # [ 41.783296] systemd-logind[447]: Session 7 logged out. Waiting for processes to exit.1490buildbot # [ 41.788656] systemd-logind[447]: Removed session 7.1491buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1492buildbot # Dload Upload Total Spent Left Speed1493buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 9233 0 0100 401 100 401 0 0 7016 0 0100 401 100 401 0 0 5736 0 01494buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1495buildbot # [ 41.995423] sshd-session[1142]: Accepted publickey for root from ::1 port 53544 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81496buildbot # [ 42.005138] sshd-session[1142]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1497buildbot # [ 42.013464] systemd-logind[447]: New session '8' of user 'root' with class 'user' and type 'tty'.1498buildbot # [ 42.017621] systemd[1]: Started Session 8 of User root.1499buildbot # [ 42.045511] sshd-session[1145]: Received disconnect from ::1 port 53544:11: disconnected by user1500buildbot # [ 42.048369] sshd-session[1145]: Disconnected from user root ::1 port 535441501buildbot # [ 42.050659] sshd-session[1142]: pam_unix(sshd:session): session closed for user root1502buildbot # [ 42.052875] systemd[1]: session-8.scope: Deactivated successfully.1503buildbot # [ 42.057757] systemd-logind[447]: Session 8 logged out. Waiting for processes to exit.1504buildbot # [ 42.060460] systemd-logind[447]: Removed session 8.1505buildbot # [ 42.068512] twistd[842]: 2026-09-06T07:07:08+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1506buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1507buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1508buildbot # Dload Upload Total Spent Left Speed1509buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 13012 0 0100 401 100 401 0 0 10245 0 0100 401 100 401 0 0 8213 0 01510buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1511buildbot # [ 43.449662] nix-daemon[1114]: accepted connection from pid 1159, user buildbot-worker1512buildbot # [ 43.511429] twistd[843]: 2026-09-06T07:07:09+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 4.6386001513buildbot # [ 43.519187] twistd[843]: 2026-09-06T07:07:09+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292d478a0>1514buildbot # [ 43.525590] twistd[842]: 2026-09-06T07:07:09+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01515buildbot # [ 43.563793] twistd[842]: 2026-09-06T07:07:09+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x78de16b89940>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x78de16b8acf0>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x78de16b8acf0>)]1516buildbot # [ 43.580602] twistd[842]: 2026-09-06T07:07:09+0000 [-] step 'Evaluate flake' complete: success (None)1517buildbot # [ 43.604682] twistd[842]: 2026-09-06T07:07:09+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1518buildbot # [ 43.617777] twistd[842]: 2026-09-06T07:07:09+0000 [-] step 'build flake' complete: success (None)1519buildbot # [ 43.632909] twistd[842]: 2026-09-06T07:07:09+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x78de16c07060>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x78de16c07110>)): []1520buildbot # [ 43.646692] twistd[842]: 2026-09-06T07:07:09+0000 [-] step 'Process skipped builds' complete: skipped (None)1521buildbot # [ 43.662278] twistd[842]: 2026-09-06T07:07:09+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1522buildbot # [ 43.665828] twistd[842]: 2026-09-06T07:07:09+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1523buildbot # [ 43.670125] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command 12): startCommand:shell1524buildbot # [ 43.673141] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1525buildbot # [ 43.676844] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1526buildbot # [ 43.681546] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1527buildbot # [ 43.687539] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1528buildbot # [ 43.690773] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1529buildbot # [ 43.695105] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1530buildbot # [ 43.707938] twistd[843]: 2026-09-06T07:07:09+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0212431531buildbot # [ 43.712914] twistd[843]: 2026-09-06T07:07:09+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292d47ce0>1532buildbot # [ 43.743884] twistd[842]: 2026-09-06T07:07:09+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01533buildbot # [ 43.771445] twistd[842]: 2026-09-06T07:07:09+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1534buildbot # [ 43.784283] twistd[842]: 2026-09-06T07:07:09+0000 [-] step 'Cleanup drv paths' complete: success (None)1535buildbot # [ 43.798385] twistd[842]: 2026-09-06T07:07:09+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1536buildbot # [ 43.802492] twistd[842]: 2026-09-06T07:07:09+0000 [-] command '['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1537buildbot # [ 43.808629] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command 13): startCommand:shell1538buildbot # [ 43.810954] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1539buildbot # [ 43.815374] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev d8165372d2c17d76768a6301e978787d796e7c4a --branch master --repo test-flake1540buildbot # [ 43.821241] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1541buildbot # [ 43.826430] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1542buildbot # [ 43.832166] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'd8165372d2c17d76768a6301e978787d796e7c4a', b'--branch', b'master', b'--repo', b'test-flake']1543buildbot # [ 43.838132] twistd[843]: 2026-09-06T07:07:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1544buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1545buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1546buildbot # Dload Upload Total Spent Left Speed1547buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 8204 0 0100 401 100 401 0 0 6241 0 0100 401 100 401 0 0 5187 0 01548buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1549buildbot # [ 44.171120] nix-daemon[1114]: accepted connection from pid 1171, user buildbot-worker1550buildbot # [ 44.196108] twistd[843]: 2026-09-06T07:07:10+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3646071551buildbot # [ 44.199731] twistd[843]: 2026-09-06T07:07:10+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292df7650>1552buildbot # [ 44.204790] twistd[842]: 2026-09-06T07:07:10+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']'> rc=01553buildbot # [ 44.231243] twistd[842]: 2026-09-06T07:07:10+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x78de16c075e0>, logEnviron=False)): []1554buildbot # [ 44.243096] twistd[842]: 2026-09-06T07:07:10+0000 [-] step 'Evaluate effects' complete: success (None)1555buildbot # [ 44.256317] twistd[842]: 2026-09-06T07:07:10+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1556buildbot # [ 44.265814] twistd[842]: 2026-09-06T07:07:10+0000 [-] step 'Buildbot effect' complete: success (None)1557buildbot # [ 44.278174] twistd[842]: 2026-09-06T07:07:10+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1558buildbot # [ 44.281508] twistd[842]: 2026-09-06T07:07:10+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1559buildbot # [ 44.285788] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command 14): startCommand:shell1560buildbot # [ 44.289804] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1561buildbot # [ 44.293160] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev d8165372d2c17d76768a6301e978787d796e7c4a --branch master --repo test-flake1562buildbot # [ 44.297452] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1563buildbot # [ 44.303064] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1564buildbot # [ 44.306841] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'd8165372d2c17d76768a6301e978787d796e7c4a', b'--branch', b'master', b'--repo', b'test-flake']1565buildbot # [ 44.312319] twistd[843]: 2026-09-06T07:07:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1566buildbot # [ 44.524436] nix-daemon[1114]: accepted connection from pid 1180, user buildbot-worker1567buildbot # [ 44.550517] twistd[843]: 2026-09-06T07:07:10+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.2612611568buildbot # [ 44.555254] twistd[843]: 2026-09-06T07:07:10+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x742292df7950>1569buildbot # [ 44.561358] twistd[842]: 2026-09-06T07:07:10+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'd8165372d2c17d76768a6301e978787d796e7c4a', '--branch', 'master', '--repo', 'test-flake']'> rc=01570buildbot # [ 44.595752] twistd[842]: 2026-09-06T07:07:10+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x78de16b881a0>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x78de16c078a0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x78de16c07950>, logEnviron=False)): []1571buildbot # [ 44.611600] twistd[842]: 2026-09-06T07:07:10+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1572buildbot # [ 44.613562] twistd[842]: 2026-09-06T07:07:10+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1573buildbot # [ 44.622340] twistd[842]: 2026-09-06T07:07:10+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1574buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1575buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1576buildbot # Dload Upload Total Spent Left Speed1577buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 13361 0 0100 411 100 411 0 0 10419 0 0100 411 100 411 0 0 8578 0 01578buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds)1579(finished: subtest: Wait for nix-eval build to complete, in 22.09 seconds)1580subtest: Schedule cache is created1581buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1582buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds)1583buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1584buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds)1585(finished: subtest: Schedule cache is created, in 0.04 seconds)1586subtest: Nightly schedulers are created1587buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1588buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1589buildbot # Dload Upload Total Spent Left Speed1590buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 52641 0 0100 3793 100 3793 0 0 47749 0 0100 3793 100 3793 0 0 43798 0 01591buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds)1592buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1593buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1594buildbot # Dload Upload Total Spent Left Speed1595buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 47088 0 0100 3793 100 3793 0 0 42617 0 0100 3793 100 3793 0 0 39076 0 01596buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds)1597buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1598buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1599buildbot # Dload Upload Total Spent Left Speed1600buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39934 0 0100 3793 100 3793 0 0 36290 0 0100 3793 100 3793 0 0 33151 0 01601buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1602buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1603buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1604buildbot # Dload Upload Total Spent Left Speed1605buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 50530 0 0100 3793 100 3793 0 0 45060 0 0100 3793 100 3793 0 0 41164 0 01606buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds)1607buildbot # [ 49.592987] twistd[842]: 2026-09-06T07:07:15+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1608buildbot # [ 49.595526] twistd[842]: 2026-09-06T07:07:15+0000 [-] beginning configuration update1609buildbot # [ 49.597417] twistd[842]: 2026-09-06T07:07:15+0000 [-] Loading configuration from '/nix/store/6m528szw698gvgsikn6qm15ww7fgxlr9-master.cfg'1610buildbot # [ 49.632152] twistd[842]: 2026-09-06T07:07:15+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1611buildbot # [ 49.642120] twistd[842]: 2026-09-06T07:07:15+0000 [-] adding 1 new schedulers, removing 01612buildbot # [ 49.770622] twistd[842]: 2026-09-06T07:07:15+0000 [-] configuration update complete (took 0.174 seconds)1613buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1614buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1615buildbot # Dload Upload Total Spent Left Speed1616buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 38745 0 0100 4079 100 4079 0 0 35419 0 0100 4079 100 4079 0 0 32735 0 01617buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds)1618buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1619buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1620buildbot # Dload Upload Total Spent Left Speed1621buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 40237 0 0100 4079 100 4079 0 0 36691 0 0100 4079 100 4079 0 0 33824 0 01622buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1623(finished: subtest: Nightly schedulers are created, in 4.88 seconds)1624subtest: Scheduled effect builder exists1625buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1626buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1627buildbot # Dload Upload Total Spent Left Speed1628buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 63915 0 0100 2371 100 2371 0 0 52119 0 0100 2371 100 2371 0 0 43762 0 01629buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.09 seconds)1630(finished: subtest: Scheduled effect builder exists, in 0.09 seconds)1631(finished: run the VM test script, in 51.31 seconds)1632test script finished in 51.34s1633cleanup1634kill QemuMachine (pid 45)1635buildbot # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/b5bpi6zfajzzrwwpgba2q6li3nnya4bs-python3-3.14.7/bin/python3.14)1636(finished: cleanup, in 0.26 seconds)