tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.01 seconds) Test will time out and terminate in 3600.0 seconds run the VM test script start all VMs node1: starting vm node1 # Disk image does not exist, creating the virtualisation disk image... node1: QEMU running (pid 46) node1 # Formatting '/build/vm-state-node1/tmp.CZYN8H00dx', fmt=raw size=1073741824 node1 # mke2fs 1.47.4 (6-Mar-2025) node1 # Discarding device blocks: 0/262144 done node1 # Creating filesystem with 262144 4k blocks and 65536 inodes node1 # Filesystem UUID: 1a69e85f-2848-4587-8464-1c540d47f612 node1 # Superblock backups stored on blocks: (finished: start all VMs, in 0.24 seconds) node1 # 32768, 98304, 163840, 229376 node1 # node1 # Allocating group tables: 0/8 done node1 # Writing inode tables: 0/8 done node1 # Creating journal (8192 blocks): done node1 # Writing superblocks and filesystem accounting information: 0/8 done node1 # node1 # Virtualisation disk image created. node1 # Starting virtiofs daemons... node1 # [2026-09-13T07:09:47Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) node1 # [2026-09-13T07:09:47Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether node1 # [2026-09-13T07:09:47Z INFO virtiofsd] Waiting for vhost-user socket connection... node1 # [2026-09-13T07:09:47Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) node1: waiting for unit buildbot-master node1 # [2026-09-13T07:09:47Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether node1: waiting for the VM to finish booting node1 # [2026-09-13T07:09:47Z INFO virtiofsd] Waiting for vhost-user socket connection... node1 # [2026-09-13T07:09:47Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) node1 # [2026-09-13T07:09:47Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether node1 # [2026-09-13T07:09:47Z INFO virtiofsd] Waiting for vhost-user socket connection... node1 # [2026-09-13T07:09:47Z INFO virtiofsd] Client connected, servicing requests node1 # [2026-09-13T07:09:47Z INFO virtiofsd] Client connected, servicing requests node1 # [2026-09-13T07:09:47Z INFO virtiofsd] Client connected, servicing requests node1 # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) node1 # node1 # node1 # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 node1 # Press Ctrl-B to configure iPXE (PCI 00:02.0)... node1 # node1 # node1 # node1 # node1 # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 node1 # Press Ctrl-B to configure iPXE (PCI 00:05.0)... node1 # node1 # node1 # Booting from ROM... node1 # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.51 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Fri Sep 11 09:49:46 UTC 2026 node1 # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/08p5x91927wncl5pgdz3divrfim5bk3i-nixos-system-node1-test/init regInfo=/nix/store/sxyp9p6nb7g6kp8wypw6m1pip6iyqsq1-closure-info/registration console=ttyS0,115200n8 console=tty0 node1 # [ 0.000000] BIOS-provided physical RAM map: node1 # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable node1 # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable node1 # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved node1 # [ 0.000000] NX (Execute Disable) protection: active node1 # [ 0.000000] APIC: Static calls initialized node1 # [ 0.000000] SMBIOS 2.8 present. node1 # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 node1 # [ 0.000000] DMI: Memory slots populated: 1/1 node1 # [ 0.000000] Hypervisor detected: KVM node1 # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 node1 # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 node1 # [ 0.000000] kvm-clock: using sched offset of 462186549 cycles node1 # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns node1 # [ 0.000004] tsc: Detected 2400.012 MHz processor node1 # [ 0.000811] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 node1 # [ 0.000838] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs node1 # [ 0.000840] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT node1 # [ 0.002729] found SMP MP-table at [mem 0x000f5450-0x000f545f] node1 # [ 0.002740] Using GB pages for direct mapping node1 # [ 0.002800] RAMDISK: [mem 0x3e36c000-0x3ffcffff] node1 # [ 0.002808] ACPI: Early table checksum verification disabled node1 # [ 0.002812] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) node1 # [ 0.002815] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002819] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002826] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002828] ACPI: FACS 0x000000003FFE0000 000040 node1 # [ 0.002829] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002831] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002832] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002834] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002835] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] node1 # [ 0.002836] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] node1 # [ 0.002837] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] node1 # [ 0.002837] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] node1 # [ 0.002838] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] node1 # [ 0.002838] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] node1 # [ 0.002839] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] node1 # [ 0.003059] No NUMA configuration found node1 # [ 0.003060] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] node1 # [ 0.003063] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] node1 # [ 0.005238] Zone ranges: node1 # [ 0.005239] DMA [mem 0x0000000000001000-0x0000000000ffffff] node1 # [ 0.005240] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] node1 # [ 0.005242] Normal empty node1 # [ 0.005242] Device empty node1 # [ 0.005243] Movable zone start for each node node1 # [ 0.005244] Early memory node ranges node1 # [ 0.005244] node 0: [mem 0x0000000000001000-0x000000000009efff] node1 # [ 0.005245] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] node1 # [ 0.005246] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] node1 # [ 0.005265] On node 0, zone DMA: 1 pages in unavailable ranges node1 # [ 0.005524] On node 0, zone DMA: 97 pages in unavailable ranges node1 # [ 0.022452] On node 0, zone DMA32: 40 pages in unavailable ranges node1 # [ 0.022891] ACPI: PM-Timer IO Port: 0x608 node1 # [ 0.022902] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) node1 # [ 0.022926] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 node1 # [ 0.022929] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) node1 # [ 0.022930] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) node1 # [ 0.022932] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) node1 # [ 0.022933] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) node1 # [ 0.022933] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) node1 # [ 0.022936] ACPI: Using ACPI (MADT) for SMP configuration information node1 # [ 0.022937] ACPI: HPET id: 0x8086a201 base: 0xfed00000 node1 # [ 0.022939] TSC deadline timer available node1 # [ 0.022943] CPU topo: Max. logical packages: 1 node1 # [ 0.022944] CPU topo: Max. logical dies: 1 node1 # [ 0.022944] CPU topo: Max. dies per package: 1 node1 # [ 0.022947] CPU topo: Max. threads per core: 1 node1 # [ 0.022948] CPU topo: Num. cores per package: 1 node1 # [ 0.022948] CPU topo: Num. threads per package: 1 node1 # [ 0.022948] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs node1 # [ 0.022965] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() node1 # [ 0.022997] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] node1 # [ 0.022999] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] node1 # [ 0.023000] [mem 0x40000000-0xafffffff] available for PCI devices node1 # [ 0.023002] Booting paravirtualized kernel on KVM node1 # [ 0.023005] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns node1 # [ 0.027462] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 node1 # [ 0.029570] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 node1 # [ 0.029614] kvm-guest: PV spinlocks disabled, single CPU node1 # [ 0.029616] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/08p5x91927wncl5pgdz3divrfim5bk3i-nixos-system-node1-test/init regInfo=/nix/store/sxyp9p6nb7g6kp8wypw6m1pip6iyqsq1-closure-info/registration console=ttyS0,115200n8 console=tty0 node1 # [ 0.029703] Unknown kernel command line parameters "regInfo=/nix/store/sxyp9p6nb7g6kp8wypw6m1pip6iyqsq1-closure-info/registration", will be passed to user space. node1 # [ 0.029715] random: crng init done node1 # [ 0.029716] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes node1 # [ 0.030747] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) node1 # [ 0.030759] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) node1 # [ 0.030789] Fallback order for Node 0: 0 node1 # [ 0.030792] Built 1 zonelists, mobility grouping on. Total pages: 262006 node1 # [ 0.030792] Policy zone: DMA32 node1 # [ 0.033287] mem auto-init: stack:all(zero), heap alloc:on, heap free:off node1 # [ 0.035685] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 node1 # [ 0.037857] allocated 2097152 bytes of page_ext node1 # [ 0.047401] ftrace: allocating 48736 entries in 192 pages node1 # [ 0.047403] ftrace: allocated 192 pages with 2 groups node1 # [ 0.048226] Dynamic Preempt: lazy node1 # [ 0.048388] rcu: Preemptible hierarchical RCU implementation. node1 # [ 0.048389] rcu: RCU event tracing is enabled. node1 # [ 0.048390] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. node1 # [ 0.048391] Trampoline variant of Tasks RCU enabled. node1 # [ 0.048392] Rude variant of Tasks RCU enabled. node1 # [ 0.048392] Tracing variant of Tasks RCU enabled. node1 # [ 0.048393] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. node1 # [ 0.048394] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 node1 # [ 0.048410] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.048411] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.048412] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.052758] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 node1 # [ 0.053040] rcu: srcu_init: Setting srcu_struct sizes based on contention. node1 # [ 0.053048] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns node1 # [ 0.053152] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) node1 # [ 0.056674] Console: colour VGA+ 80x25 node1 # [ 0.056677] printk: legacy console [tty0] enabled node1 # [ 0.085654] printk: legacy console [ttyS0] enabled node1 # [ 0.191051] ACPI: Core revision 20250807 node1 # [ 0.192013] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns node1 # [ 0.193618] APIC: Switch to symmetric I/O mode setup node1 # [ 0.194625] x2apic enabled node1 # [ 0.195371] APIC: Switched APIC routing to: physical x2apic node1 # [ 0.197164] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 node1 # [ 0.198179] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns node1 # [ 0.199935] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) node1 # [ 0.201020] x86/cpu: User Mode Instruction Prevention (UMIP) activated node1 # [ 0.202949] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 node1 # [ 0.203903] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 node1 # [ 0.204936] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto node1 # [ 0.205932] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl node1 # [ 0.207933] Transient Scheduler Attacks: Vulnerable: No microcode node1 # [ 0.208932] Spectre V2 : Mitigation: Enhanced / Automatic IBRS node1 # [ 0.209933] Speculative Return Stack Overflow: Mitigation: Safe RET node1 # [ 0.210932] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization node1 # [ 0.212940] Spectre V2 : Enabling IBPB for BPF node1 # [ 0.213694] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier node1 # [ 0.214933] active return thunk: srso_alias_return_thunk node1 # [ 0.215955] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' node1 # [ 0.216932] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' node1 # [ 0.217932] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' node1 # [ 0.218932] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' node1 # [ 0.219932] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' node1 # [ 0.220932] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' node1 # [ 0.222695] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' node1 # [ 0.223836] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 node1 # [ 0.224639] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 node1 # [ 0.225643] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 node1 # [ 0.226648] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 node1 # [ 0.227631] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 node1 # [ 0.228630] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. node1 # [ 0.262954] Freeing SMP alternatives memory: 44K node1 # [ 0.263710] pid_max: default: 32768 minimum: 301 node1 # [ 0.264026] LSM: initializing lsm=capability,landlock,yama,bpf,ima node1 # [ 0.265035] landlock: Up and running. node1 # [ 0.265933] Yama: becoming mindful. node1 # [ 0.267017] LSM support for eBPF active node1 # [ 0.267713] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) node1 # [ 0.268798] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) node1 # [ 0.271089] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) node1 # [ 0.272537] Performance Events: Fam17h+ core perfctr, AMD PMU driver. node1 # [ 0.272941] ... version: 2 node1 # [ 0.273602] ... bit width: 48 node1 # [ 0.273935] ... generic counters: 6 node1 # [ 0.274628] ... generic bitmap: 000000000000003f node1 # [ 0.274934] ... fixed-purpose counters: 0 node1 # [ 0.275594] ... fixed-purpose bitmap: 0000000000000000 node1 # [ 0.275934] ... value mask: 0000ffffffffffff node1 # [ 0.276789] ... max period: 00007fffffffffff node1 # [ 0.277683] ... global_ctrl mask: 000000000000003f node1 # [ 0.278062] signal: max sigframe size: 3376 node1 # [ 0.278941] rcu: Hierarchical SRCU implementation. node1 # [ 0.279785] rcu: Max phase no-delay instances is 400. node1 # [ 0.285166] smp: Bringing up secondary CPUs ... node1 # [ 0.285947] smp: Brought up 1 node, 1 CPU node1 # [ 0.286622] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) node1 # [ 0.287117] Memory: 941044K/1048024K available (17231K kernel code, 2726K rwdata, 13600K rodata, 3644K init, 2988K bss, 99596K reserved, 0K cma-reserved) node1 # [ 0.288175] devtmpfs: initialized node1 # [ 0.288994] x86/mm: Memory block size: 128MB node1 # [ 0.290716] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) node1 # [ 0.291917] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). node1 # [ 0.293027] pinctrl core: initialized pinctrl subsystem node1 # [ 0.294161] PM: RTC time: 07:09:47, date: 2026-09-13 node1 # [ 0.297740] NET: Registered PF_NETLINK/PF_ROUTE protocol family node1 # [ 0.299051] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations node1 # [ 0.299952] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations node1 # [ 0.301082] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations node1 # [ 0.301944] audit: initializing netlink subsys (disabled) node1 # [ 0.303149] thermal_sys: Registered thermal governor 'fair_share' node1 # [ 0.303151] thermal_sys: Registered thermal governor 'bang_bang' node1 # [ 0.303936] thermal_sys: Registered thermal governor 'step_wise' node1 # [ 0.304938] audit: type=2000 audit(1789283388.296:1): state=initialized audit_enabled=0 res=1 node1 # [ 0.306937] thermal_sys: Registered thermal governor 'user_space' node1 # [ 0.306939] thermal_sys: Registered thermal governor 'power_allocator' node1 # [ 0.307942] cpuidle: using governor menu node1 # [ 0.310190] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 node1 # [ 0.311149] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] node1 # [ 0.311938] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry node1 # [ 0.312948] PCI: Using configuration type 1 for base access node1 # [ 0.314096] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. node1 # [ 0.319065] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages node1 # [ 0.319935] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page node1 # [ 0.324936] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages node1 # [ 0.325935] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page node1 # [ 0.336290] ACPI: Added _OSI(Module Device) node1 # [ 0.336937] ACPI: Added _OSI(Processor Device) node1 # [ 0.337717] ACPI: Added _OSI(Processor Aggregator Device) node1 # [ 0.346448] ACPI: 1 ACPI AML tables successfully acquired and loaded node1 # [ 0.350352] ACPI: Interpreter enabled node1 # [ 0.350951] ACPI: PM: (supports S0 S3 S4 S5) node1 # [ 0.351664] ACPI: Using IOAPIC for interrupt routing node1 # [ 0.353986] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug node1 # [ 0.354936] PCI: Using E820 reservations for host bridge windows node1 # [ 0.358074] ACPI: Enabled 2 GPEs in block 00 to 3F node1 # [ 0.365899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) node1 # [ 0.366744] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] node1 # [ 0.368040] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] node1 # [ 0.369074] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] node1 # [ 0.370297] PCI host bridge to bus 0000:00 node1 # [ 0.370939] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] node1 # [ 0.371935] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] node1 # [ 0.372935] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] node1 # [ 0.373935] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] node1 # [ 0.374935] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] node1 # [ 0.375935] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] node1 # [ 0.376935] pci_bus 0000:00: root bus resource [bus 00-ff] node1 # [ 0.378001] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint node1 # [ 0.379372] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint node1 # [ 0.382068] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] node1 # [ 0.382946] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] node1 # [ 0.383956] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] node1 # [ 0.385252] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] node1 # [ 0.386659] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint node1 # [ 0.389997] pci 0000:00:02.0: BAR 0 [io 0xc100-0xc11f] node1 # [ 0.390795] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] node1 # [ 0.391628] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] node1 # [ 0.391940] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] node1 # [ 0.393439] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint node1 # [ 0.394942] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] node1 # [ 0.395855] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] node1 # [ 0.396674] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] node1 # [ 0.397531] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint node1 # [ 0.399972] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] node1 # [ 0.400941] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] node1 # [ 0.401903] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] node1 # [ 0.403315] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint node1 # [ 0.404971] pci 0000:00:05.0: BAR 0 [io 0xc140-0xc15f] node1 # [ 0.405779] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] node1 # [ 0.406720] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] node1 # [ 0.407845] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref] node1 # [ 0.409630] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint node1 # [ 0.411835] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] node1 # [ 0.412747] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] node1 # [ 0.414398] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint node1 # [ 0.415947] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] node1 # [ 0.416945] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] node1 # [ 0.418562] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint node1 # [ 0.419779] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] node1 # [ 0.420745] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] node1 # [ 0.422399] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint node1 # [ 0.423881] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] node1 # [ 0.424744] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] node1 # [ 0.426491] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint node1 # [ 0.427993] pci 0000:00:0a.0: BAR 0 [io 0xc080-0xc0bf] node1 # [ 0.428894] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] node1 # [ 0.429745] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] node1 # [ 0.431380] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint node1 # [ 0.432943] pci 0000:00:0b.0: BAR 0 [io 0xc160-0xc17f] node1 # [ 0.433941] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] node1 # [ 0.434956] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] node1 # [ 0.436533] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.437523] pci 0000:00:1d.0: BAR 4 [io 0xc180-0xc19f] node1 # [ 0.438135] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.439501] pci 0000:00:1d.1: BAR 4 [io 0xc1a0-0xc1bf] node1 # [ 0.440138] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.441513] pci 0000:00:1d.2: BAR 4 [io 0xc1c0-0xc1df] node1 # [ 0.442189] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint node1 # [ 0.444455] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] node1 # [ 0.445202] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint node1 # [ 0.446254] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO node1 # [ 0.447197] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint node1 # [ 0.448761] pci 0000:00:1f.2: BAR 4 [io 0xc1e0-0xc1ff] node1 # [ 0.449602] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] node1 # [ 0.450290] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint node1 # [ 0.451606] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] node1 # [ 0.455011] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 node1 # [ 0.456040] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 node1 # [ 0.457038] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 node1 # [ 0.458035] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 node1 # [ 0.459040] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 node1 # [ 0.460036] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 node1 # [ 0.461058] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 node1 # [ 0.462052] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 node1 # [ 0.462975] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 node1 # [ 0.463950] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 node1 # [ 0.464949] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 node1 # [ 0.465951] ACPI: PCI: Interrupt link GSID configured for IRQ 19 node1 # [ 0.466948] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 node1 # [ 0.467950] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 node1 # [ 0.468948] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 node1 # [ 0.469948] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 node1 # [ 0.471987] iommu: Default domain type: Translated node1 # [ 0.472833] iommu: DMA domain TLB invalidation policy: lazy mode node1 # [ 0.473999] ACPI: bus type USB registered node1 # [ 0.474788] usbcore: registered new interface driver usbfs node1 # [ 0.475671] usbcore: registered new interface driver hub node1 # [ 0.475947] usbcore: registered new device driver usb node1 # [ 0.477784] NetLabel: Initializing node1 # [ 0.478420] NetLabel: domain hash size = 128 node1 # [ 0.478935] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO node1 # [ 0.479901] NetLabel: unlabeled traffic allowed by default node1 # [ 0.480651] PCI: Using ACPI for IRQ routing node1 # [ 0.524478] pci 0000:00:01.0: vgaarb: setting as boot VGA device node1 # [ 0.524931] pci 0000:00:01.0: vgaarb: bridge control possible node1 # [ 0.524931] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none node1 # [ 0.524939] vgaarb: loaded node1 # [ 0.525706] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 node1 # [ 0.525937] hpet0: 3 comparators, 64-bit 100.000000 MHz counter node1 # [ 0.531016] clocksource: Switched to clocksource kvm-clock node1 # [ 0.532775] VFS: Disk quotas dquot_6.6.0 node1 # [ 0.535293] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) node1 # [ 0.536684] pnp: PnP ACPI init node1 # [ 0.537464] ACPI: IRQ 4 override to edge(!), high(!) node1 # [ 0.538458] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved node1 # [ 0.540030] pnp: PnP ACPI: found 5 devices node1 # [ 0.547577] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns node1 # [ 0.549057] clocksource: Switched to clocksource acpi_pm node1 # [ 0.550076] NET: Registered PF_INET protocol family node1 # [ 0.551167] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) node1 # [ 0.567857] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) node1 # [ 0.569465] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) node1 # [ 0.570798] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) node1 # [ 0.572168] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) node1 # [ 0.573432] TCP: Hash tables configured (established 8192 bind 8192) node1 # [ 0.574565] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) node1 # [ 0.575857] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) node1 # [ 0.577036] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) node1 # [ 0.578279] NET: Registered PF_UNIX/PF_LOCAL protocol family node1 # [ 0.579262] NET: Registered PF_XDP protocol family node1 # [ 0.580152] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] node1 # [ 0.581157] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] node1 # [ 0.582169] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] node1 # [ 0.583262] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] node1 # [ 0.584446] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] node1 # [ 0.585588] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] node1 # [ 0.587540] ACPI: \_SB_.GSIA: Enabled at IRQ 16 node1 # [ 0.589815] ACPI: \_SB_.GSIB: Enabled at IRQ 17 node1 # [ 0.592218] ACPI: \_SB_.GSIC: Enabled at IRQ 18 node1 # [ 0.594183] ACPI: \_SB_.GSID: Enabled at IRQ 19 node1 # [ 0.595946] PCI: CLS 0 bytes, default 64 node1 # [ 0.596864] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns node1 # [ 0.598680] Trying to unpack rootfs image as initramfs... node1 # [ 0.641875] Initialise system trusted keyrings node1 # [ 0.644956] workingset: timestamp_bits=40 max_order=18 bucket_order=0 node1 # [ 0.665154] Key type asymmetric registered node1 # [ 0.667916] Asymmetric key parser 'x509' registered node1 # [ 0.668803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) node1 # [ 0.672054] io scheduler mq-deadline registered node1 # [ 0.672856] io scheduler kyber registered node1 # [ 0.676926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled node1 # [ 0.678232] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A node1 # [ 0.683678] Linux agpgart interface v0.103 node1 # [ 0.684493] ACPI: bus type drm_connector registered node1 # [ 0.687362] usbcore: registered new interface driver usbserial_generic node1 # [ 0.688491] usbserial: USB Serial support registered for generic node1 # [ 0.691944] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. node1 # [ 0.691944] Please enable it if your BIOS has the CPPC option. node1 # [ 0.694223] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled node1 # [ 0.699045] drop_monitor: Initializing network drop monitor service node1 # [ 0.700272] NET: Registered PF_INET6 protocol family node1 # [ 0.703440] Segment Routing with IPv6 node1 # [ 0.704122] In-situ OAM (IOAM) with IPv6 node1 # [ 0.707208] IPI shorthand broadcast: enabled node1 # [ 0.715462] sched_clock: Marking stable (572015456, 142884056)->(783205794, -68306282) node1 # [ 0.719038] registered taskstats version 1 node1 # [ 0.720056] Loading compiled-in X.509 certificates node1 # [ 0.738910] Demotion targets for Node 0: null node1 # [ 0.739861] Key type .fscrypt registered node1 # [ 0.741910] Key type fscrypt-provisioning registered node1 # [ 0.742909] ima: No TPM chip found, activating TPM-bypass! node1 # [ 0.743849] ima: Allocated hash algorithm: sha1 node1 # [ 0.746952] ima: No architecture policies found node1 # [ 0.749913] PM: Magic number: 10:352:167 node1 # [ 0.751572] RAS: Correctable Errors collector initialized. node1 # [ 0.760632] clk: Disabling unused clocks node1 # [ 0.764916] PM: genpd: Disabling unused power domains node1 # [ 0.923639] Freeing initrd memory: 29072K node1 # [ 0.926937] Freeing unused decrypted memory: 2028K node1 # [ 0.929651] Freeing unused kernel image (initmem) memory: 3644K node1 # [ 0.930778] Write protecting the kernel read-only data: 32768k node1 # [ 0.932709] Freeing unused kernel image (text/rodata gap) memory: 1200K node1 # [ 0.934284] Freeing unused kernel image (rodata/data gap) memory: 736K node1 # [ 0.985163] x86/mm: Checked W+X mappings: passed, no W+X pages found. node1 # [ 0.986230] Run /init as init process node1 # [ 0.997019] systemd[1]: Inserted module 'autofs4' node1 # [ 1.017685] fuse: init (API version 7.45) node1 # [ 1.025076] ACPI: \_SB_.GSIG: Enabled at IRQ 22 node1 # [ 1.027528] ACPI: \_SB_.GSIH: Enabled at IRQ 23 node1 # [ 1.030303] ACPI: \_SB_.GSIE: Enabled at IRQ 20 node1 # [ 1.032221] ACPI: \_SB_.GSIF: Enabled at IRQ 21 node1 # [ 1.036864] virtiofs virtio5: discovered new tag: nix-store node1 # [ 1.038609] virtiofs virtio5: virtio_fs_setup_dax: No cache capability node1 # [ 1.044993] virtiofs virtio6: discovered new tag: shared node1 # [ 1.046533] virtiofs virtio6: virtio_fs_setup_dax: No cache capability node1 # [ 1.049829] virtiofs virtio7: discovered new tag: xchg node1 # [ 1.051371] virtiofs virtio7: virtio_fs_setup_dax: No cache capability node1 # [ 1.070681] systemd[1]: Successfully made /usr/ read-only. node1 # [ 1.406262] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) node1 # [ 1.411476] systemd[1]: Detected virtualization kvm. node1 # [ 1.412388] systemd[1]: Detected architecture x86-64. node1 # [ 1.413265] systemd[1]: Running in initrd. node1 # [ 1.414352] systemd[1]: Initializing machine ID from random generator. node1 # [ 1.415573] systemd[1]: Hostname set to . node1 # [ 1.607288] systemd[1]: bpf-restrict-fs: LSM BPF program attached node1 # [ 1.645095] systemd[1]: Queued start job for default target Initrd Default Target. node1 # [ 1.648243] systemd[1]: Created slice Slice /system/modprobe. node1 # [ 1.649415] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. node1 # [ 1.650846] systemd[1]: Expecting device /dev/disk/by-label/nixos... node1 # [ 1.651980] systemd[1]: Reached target Path Units. node1 # [ 1.652932] systemd[1]: Reached target Slice Units. node1 # [ 1.653824] systemd[1]: Reached target Swaps. node1 # [ 1.654693] systemd[1]: Reached target Timer Units. node1 # [ 1.655709] systemd[1]: Listening on D-Bus System Message Bus Socket. node1 # [ 1.657000] systemd[1]: Listening on Journal Socket (/dev/log). node1 # [ 1.658228] systemd[1]: Listening on Journal Sockets. node1 # [ 1.659253] systemd[1]: Listening on udev Control Socket. node1 # [ 1.660320] systemd[1]: Listening on udev Kernel Socket. node1 # [ 1.661257] systemd[1]: Reached target Socket Units. node1 # [ 1.663060] systemd[1]: Starting Create List of Static Device Nodes... node1 # [ 1.666976] systemd[1]: Starting Load Kernel Module configfs... node1 # [ 1.676349] systemd[1]: Starting Journal Service... node1 # [ 1.699980] systemd[1]: Starting Load Kernel Modules... node1 # [ 1.704049] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 1.712085] systemd[1]: Starting Coldplug All udev Devices... node1 # [ 1.718872] systemd-journald[66]: Collecting audit messages is disabled. node1 # [ 1.727119] systemd[1]: Finished Create List of Static Device Nodes. node1 # [ 1.729519] systemd[1]: modprobe@configfs.service: Deactivated successfully. node1 # [ 1.737286] systemd[1]: Finished Load Kernel Module configfs. node1 # [ 1.743358] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config node1 # [ 1.755973] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... node1 # [ 1.765930] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. node1 # [ 1.772971] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev node1 # [ 1.797451] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. node1 # [ 1.806107] systemd[1]: Starting Create Static Device Nodes in /dev... node1 # [ 1.816433] systemd[1]: Finished Load Kernel Modules. node1 # [ 1.824574] systemd[1]: Starting Apply Kernel Variables... node1 # [ 1.694595] systemd-modules-load[67]: Inserted module 'dm_mod'[ 1.840040] systemd[1]: Started Journal Service. node1 # node1 # [ 1.699350] systemd-modules-load[67]: Inserted module 'virtio_balloon' node1 # [ 1.701304] systemd-modules-load[67]: Inserted module 'virtio_gpu' node1 # [ 1.708597] systemd[1]: Finished Create Static Device Nodes in /dev. node1 # [ 1.716082] systemd[1]: Reached target Preparation for Local File Systems. node1 # [ 1.717124] systemd[1]: Reached target Local File Systems. node1 # [ 1.720934] systemd[1]: Starting Create System Files and Directories... node1 # [ 1.726138] systemd[1]: Starting Rule-based Manager for Device Events and Files... node1 # [ 1.732105] systemd[1]: Finished Apply Kernel Variables. node1 # [ 1.754248] systemd[1]: Finished Create System Files and Directories. node1 # [ 1.775671] systemd-udevd[80]: Using default interface naming scheme 'v261'. node1 # [ 1.802076] systemd[1]: Started Rule-based Manager for Device Events and Files. node1 # [ 1.852806] systemd[1]: Finished Coldplug All udev Devices. node1 # [ 1.855126] systemd[1]: Reached target System Initialization. node1 # [ 1.857458] systemd[1]: Reached target Basic System. node1 # [ 2.188364] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 node1 # [ 2.190180] virtio_blk virtio2: 1/0/0 default/read/poll queues node1 # [ 2.191704] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) node1 # [ 2.203535] ehci-pci 0000:00:1d.7: EHCI Host Controller node1 # [ 2.204366] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 node1 # [ 2.206053] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 node1 # [ 2.208066] serio: i8042 KBD port at 0x60,0x64 irq 1 node1 # [ 2.208754] serio: i8042 AUX port at 0x60,0x64 irq 12 node1 # [ 2.211918] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 node1 # [ 2.215974] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 node1 # [ 2.217056] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.218567] usb usb1: Product: EHCI Host Controller node1 # [ 2.221343] usb usb1: Manufacturer: Linux 6.18.51 ehci_hcd node1 # [ 2.222162] usb usb1: SerialNumber: 0000:00:1d.7 node1 # [ 2.223577] hub 1-0:1.0: USB hub found node1 # [ 2.225176] hub 1-0:1.0: 6 ports detected node1 # [ 2.232026] uhci_hcd 0000:00:1d.0: UHCI Host Controller node1 # [ 2.232776] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 node1 # [ 2.240613] uhci_hcd 0000:00:1d.0: detected 2 ports node1 # [ 2.245073] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c180 node1 # [ 2.255153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 2.256241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.271679] usb usb2: Product: UHCI Host Controller node1 # [ 2.275950] usb usb2: Manufacturer: Linux 6.18.51 uhci_hcd node1 # [ 2.276720] usb usb2: SerialNumber: 0000:00:1d.0 node1 # [ 2.280246] SCSI subsystem initialized node1 # [ 2.288560] hub 2-0:1.0: USB hub found node1 # [ 2.295048] hub 2-0:1.0: 2 ports detected node1 # [ 2.153597] systemd[1]: Starting Virtual Console Setup... node1 # [ 2.309858] uhci_hcd 0000:00:1d.1: UHCI Host Controller node1 # [ 2.171302] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 2.318015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 node1 # [ 2.180980] (udev-worker)[86]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. node1 # [ 2.183036] (udev-worker)[86]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 2.194218] systemd-vconsole-setup[97]: Configuration of first virtual console was skipped, ignoring remaining ones. node1 # [ 2.195966] systemd[1]: Finished Virtual Console Setup. node1 # [ 2.346773] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 node1 # [ 2.347848] uhci_hcd 0000:00:1d.1: detected 2 ports node1 # [ 2.360062] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a0 node1 # [ 2.366016] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 2.367117] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.227091] systemd[1]: Found device /dev/disk/by-label/nixos. node1 # [ 2.228119] systemd[1]: Reached target Initrd Root Device. node1 # [ 2.232067] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... node1 # [ 2.379860] usb usb3: Product: UHCI Host Controller node1 # [ 2.380794] usb usb3: Manufacturer: Linux 6.18.51 uhci_hcd node1 # [ 2.381656] usb usb3: SerialNumber: 0000:00:1d.1 node1 # [ 2.387653] hub 3-0:1.0: USB hub found node1 # [ 2.389933] hub 3-0:1.0: 2 ports detected node1 # [ 2.396170] uhci_hcd 0000:00:1d.2: UHCI Host Controller node1 # [ 2.397945] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 node1 # [ 2.400955] uhci_hcd 0000:00:1d.2: detected 2 ports node1 # [ 2.401795] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c0 node1 # [ 2.405166] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 2.407968] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.409938] usb usb4: Product: UHCI Host Controller node1 # [ 2.410663] usb usb4: Manufacturer: Linux 6.18.51 uhci_hcd node1 # [ 2.274327] systemd-fsck[105]: nixos: clean, 12/65536 files, 13019/262144 blocks node1 # [ 2.420984] usb usb4: SerialNumber: 0000:00:1d.2 node1 # [ 2.421851] hub 4-0:1.0: USB hub found node1 # [ 2.282699] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. node1 # [ 2.427011] hub 4-0:1.0: 2 ports detected node1 # [ 2.451007] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode node1 # [ 2.459431] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) node1 # [ 2.462421] ahci 0000:00:1f.2: flags: 64bit ncq only node1 # [ 2.468922] usb 1-1: new high-speed USB device number 2 using ehci-pci node1 # [ 2.470944] scsi host0: ahci node1 # [ 2.473400] scsi host1: ahci node1 # [ 2.475437] scsi host2: ahci node1 # [ 2.476799] scsi host3: ahci node1 # [ 2.478720] scsi host4: ahci node1 # [ 2.480228] scsi host5: ahci node1 # [ 2.480744] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 47 lpm-pol 1 node1 # [ 2.482840] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 47 lpm-pol 1 node1 # [ 2.484104] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 47 lpm-pol 1 node1 # [ 2.485235] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 47 lpm-pol 1 node1 # [ 2.486370] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 47 lpm-pol 1 node1 # [ 2.487551] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 47 lpm-pol 1 node1 # [ 2.598565] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 node1 # [ 2.601415] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 node1 # [ 2.604670] usb 1-1: Product: QEMU USB Tablet node1 # [ 2.606446] usb 1-1: Manufacturer: QEMU node1 # [ 2.608116] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 node1 # [ 2.640151] hid: raw HID events driver (C) Jiri Kosina node1 # [ 2.582291] systemd[1]: Mounting /sysroot... node1 # [ 2.797940] ata6: SATA link down (SStatus 0 SControl 300) node1 # [ 2.800437] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) node1 # [ 2.803180] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 node1 # [ 2.805322] ata3.00: applying bridge limits node1 # [ 2.807393] ata4: SATA link down (SStatus 0 SControl 300) node1 # [ 2.809645] ata1: SATA link down (SStatus 0 SControl 300) node1 # [ 2.812000] ata5: SATA link down (SStatus 0 SControl 300) node1 # [ 2.814221] ata2: SATA link down (SStatus 0 SControl 300) node1 # [ 2.816343] ata3.00: configured for UDMA/100 node1 # [ 2.818815] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 node1 # [ 2.890014] usbcore: registered new interface driver usbhid node1 # [ 2.890802] usbhid: USB HID core driver node1 # [ 2.919394] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 node1 # [ 2.921145] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 node1 # [ 2.926490] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray node1 # [ 2.937244] cdrom: Uniform CD-ROM driver Revision: 3.20 node1 # [ 2.943812] EXT4-fs (vda): mounted filesystem 1a69e85f-2848-4587-8464-1c540d47f612 r/w with ordered data mode. Quota mode: none. node1 # [ 2.807608] systemd[1]: Mounted /sysroot. node1 # [ 2.808586] systemd[1]: Reached target Initrd Root File System. node1 # [ 2.811817] systemd[1]: Starting Mountpoints Configured in the Real Root... node1 # [ 2.823729] systemd-sysroot-fstab-check[140]: /sysroot should be mounted in the initrd, will request daemon-reload. node1 # [ 2.829066] systemd[1]: Reload requested from client PID 140 ('systemd-sysroot') (unit initrd-parse-etc.service)... node1 # [ 2.830527] systemd[1]: Reloading... node1 # [ 2.911291] systemd[1]: Reloading finished in 82 ms. node1 # [ 2.918776] systemd-sysroot-fstab-check[140]: Requesting initrd-fs.target/start/replace... node1 # [ 2.920979] systemd-sysroot-fstab-check[140]: Requesting swap.target/start/replace... node1 # [ 2.925144] systemd[1]: initrd-parse-etc.service: Deactivated successfully. node1 # [ 2.926543] systemd[1]: Finished Mountpoints Configured in the Real Root. node1 # [ 2.928137] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. node1 # [ 3.583412] systemd[1]: Mounting /sysroot/nix/.ro-store... node1 # [ 3.590165] systemd[1]: Mounting /sysroot/nix/.rw-store... node1 # [ 3.597338] systemd[1]: Mounting /sysroot/run... node1 # [ 3.607176] systemd[1]: Mounting /sysroot/tmp/shared... node1 # [ 3.621160] systemd[1]: Mounting /sysroot/tmp/xchg... node1 # [ 3.657906] systemd[1]: Mounted /sysroot/nix/.ro-store. node1 # [ 3.660326] systemd[1]: Mounted /sysroot/nix/.rw-store. node1 # [ 3.662735] systemd[1]: Mounted /sysroot/run. node1 # [ 3.663598] systemd[1]: Mounted /sysroot/tmp/shared. node1 # [ 3.667891] systemd[1]: Mounted /sysroot/tmp/xchg. node1 # [ 3.670661] systemd[1]: Starting rw-sysroot-nix-store.service... node1 # [ 3.681158] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. node1 # [ 3.682593] systemd[1]: Finished rw-sysroot-nix-store.service. node1 # [ 4.582538] systemd[1]: Mounting /sysroot/nix/store... node1 # [ 4.630351] systemd[1]: Mounted /sysroot/nix/store. node1 # [ 4.632710] systemd[1]: Reached target Initrd File Systems. node1 # [ 4.634419] systemd[1]: Starting Find NixOS closure... node1 # [ 4.638354] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... node1 # [ 4.654677] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. node1 # [ 4.658082] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. node1 # [ 4.663798] systemd[1]: Finished Find NixOS closure. node1 # [ 4.665168] systemd[1]: Reached target Initrd Default Target. node1 # [ 4.667082] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... node1 # [ 4.680545] systemd[1]: Stopped target Initrd Default Target. node1 # [ 4.681614] systemd[1]: Stopped target Basic System. node1 # [ 4.682509] systemd[1]: Stopped target Initrd Root Device. node1 # [ 4.684107] systemd[1]: Stopped target Path Units. node1 # [ 4.684823] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. node1 # [ 4.685858] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. node1 # [ 4.687040] systemd[1]: Stopped target Slice Units. node1 # [ 4.687769] systemd[1]: Stopped target Socket Units. node1 # [ 4.688606] systemd[1]: Stopped target System Initialization. node1 # [ 4.689610] systemd[1]: Stopped target Swaps. node1 # [ 4.690581] systemd[1]: Stopped target Timer Units. node1 # [ 4.691486] systemd[1]: dbus.socket: Deactivated successfully. node1 # [ 4.692475] systemd[1]: Closed D-Bus System Message Bus Socket. node1 # [ 4.693974] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. node1 # [ 4.695043] systemd[1]: Stopped Find NixOS closure. node1 # [ 4.696101] systemd[1]: Starting rw-sysroot-nix-store.service... node1 # [ 4.697167] systemd[1]: systemd-sysctl.service: Deactivated successfully. node1 # [ 4.698377] systemd[1]: Stopped Apply Kernel Variables. node1 # [ 4.700319] systemd[1]: systemd-modules-load.service: Deactivated successfully. node1 # [ 4.701478] systemd[1]: Stopped Load Kernel Modules. node1 # [ 4.703747] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. node1 # [ 4.704872] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. node1 # [ 4.705934] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. node1 # [ 4.707085] systemd[1]: Stopped Create System Files and Directories. node1 # [ 4.707932] systemd[1]: Stopped target Local File Systems. node1 # [ 4.709332] systemd[1]: Stopped target Preparation for Local File Systems. node1 # [ 4.710303] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. node1 # [ 4.712309] systemd[1]: Stopped Coldplug All udev Devices. node1 # [ 4.714385] systemd[1]: Stopping Rule-based Manager for Device Events and Files... node1 # [ 4.715414] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 4.717125] systemd[1]: Stopped Virtual Console Setup. node1 # [ 4.724190] systemd[1]: initrd-cleanup.service: Deactivated successfully. node1 # [ 4.727084] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. node1 # [ 4.729978] systemd[1]: systemd-udevd.service: Deactivated successfully. node1 # [ 4.733060] systemd[1]: Stopped Rule-based Manager for Device Events and Files. node1 # [ 4.735864] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. node1 # [ 4.736858] systemd[1]: Closed udev Control Socket. node1 # [ 4.738148] systemd[1]: Starting Cleanup udev Database... node1 # [ 4.740151] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. node1 # [ 4.741250] systemd[1]: Stopped Create Static Device Nodes in /dev. node1 # [ 4.742098] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. node1 # [ 4.743985] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. node1 # [ 4.744981] systemd[1]: kmod-static-nodes.service: Deactivated successfully. node1 # [ 4.745945] systemd[1]: Stopped Create List of Static Device Nodes. node1 # [ 4.746867] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. node1 # [ 4.749571] systemd[1]: Finished rw-sysroot-nix-store.service. node1 # [ 4.763670] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. node1 # [ 4.766070] systemd[1]: Finished Cleanup udev Database. node1 # [ 4.766822] systemd[1]: Reached target Switch Root. node1 # [ 4.767857] systemd[1]: Starting NixOS Activation... node1 # [ 4.836159] initrd-nixos-activation-start[192]: booting system configuration /nix/store/08p5x91927wncl5pgdz3divrfim5bk3i-nixos-system-node1-test node1 # [ 4.861976] initrd-nixos-activation-start[192]: running activation script... node1 # [ 5.043749] initrd-nixos-activation-start[215]: setting up /etc... node1 # [ 5.147626] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. node1 # [ 5.148831] systemd[1]: Finished NixOS Activation. node1 # [ 5.150768] systemd[1]: Starting Switch Root... node1 # [ 5.163676] systemd[1]: Switching root. node1 # [ 5.436244] systemd-journald[66]: Received SIGTERM from PID 1 (systemd). node1 # [ 5.542629] NET: Registered PF_VSOCK protocol family node1 # [ 5.901259] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) node1 # [ 5.910840] systemd[1]: Detected virtualization kvm. node1 # [ 5.912643] systemd[1]: Detected architecture x86-64. node1 # [ 5.914552] systemd[1]: Detected first boot. node1 # [ 5.918613] systemd[1]: Initializing machine ID from random generator. node1 # [ 6.173411] systemd[1]: bpf-restrict-fs: LSM BPF program attached node1 # [ 6.256368] systemd[1]: Applying preset policy. node1 # [ 6.418451] systemd[1]: Populated /etc with preset unit settings. node1 # [ 6.612784] systemd[1]: initrd-switch-root.service: Deactivated successfully. node1 # [ 6.614168] systemd[1]: Stopped initrd-switch-root.service. node1 # [ 6.616278] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. node1 # [ 6.618293] systemd[1]: Created slice Slice /system/getty. node1 # [ 6.619551] systemd[1]: Created slice User and Session Slice. node1 # [ 6.620500] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. node1 # [ 6.621691] systemd[1]: Started Forward Password Requests to Wall Directory Watch. node1 # [ 6.622766] systemd[1]: Expecting device /dev/hvc0... node1 # [ 6.623574] systemd[1]: Expecting device /dev/ttyS0... node1 # [ 6.624300] systemd[1]: Reached target Local Encrypted Volumes. node1 # [ 6.625092] systemd[1]: Stopped target initrd-fs.target. node1 # [ 6.625832] systemd[1]: Stopped target initrd-root-fs.target. node1 # [ 6.626653] systemd[1]: Stopped target initrd-switch-root.target. node1 # [ 6.627518] systemd[1]: Reached target Virtual Machines and Containers. node1 # [ 6.628431] systemd[1]: Reached target Path Units. node1 # [ 6.629146] systemd[1]: Reached target Remote File Systems. node1 # [ 6.629943] systemd[1]: Reached target Slice Units. node1 # [ 6.630646] systemd[1]: Reached target Swaps. node1 # [ 6.632487] systemd[1]: Listening on Query the User Interactively for a Password. node1 # [ 6.634926] systemd[1]: Listening on Process Core Dump Socket. node1 # [ 6.636659] systemd[1]: Listening on Credential Encryption/Decryption. node1 # [ 6.638554] systemd[1]: Listening on Factory Reset Management. node1 # [ 6.650780] systemd[1]: Listening on Hostname Service Socket. node1 # [ 6.653468] systemd[1]: Starting Journal Log Access Socket... node1 # [ 6.654929] systemd[1]: Listening on Journal Audit Socket. node1 # [ 6.657566] systemd[1]: Listening on Console Output Muting Service Socket. node1 # [ 6.658955] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. node1 # [ 6.660054] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 6.661305] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki node1 # [ 6.665315] systemd[1]: Listening on Disk Repartitioning Service Socket. node1 # [ 6.666290] systemd[1]: Listening on udev Control Socket. node1 # [ 6.667143] systemd[1]: Listening on udev Varlink Socket. node1 # [ 6.669307] systemd[1]: Mounting Huge Pages File System... node1 # [ 6.671510] systemd[1]: Mounting POSIX Message Queue File System... node1 # [ 6.677309] systemd[1]: Mounting Kernel Debug File System... node1 # [ 6.685174] systemd[1]: Mounting Kernel Trace File System... node1 # [ 6.693388] systemd[1]: Starting Create List of Static Device Nodes... node1 # [ 6.703504] systemd[1]: Starting Load Kernel Module configfs... node1 # [ 6.708152] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm node1 # [ 6.716143] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore node1 # [ 6.729459] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse node1 # [ 6.741073] systemd[1]: Mounting FUSE Control File System... node1 # [ 6.750222] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 node1 # [ 6.760496] systemd[1]: Starting Journal Service... node1 # [ 6.766642] systemd[1]: Starting Load Kernel Modules... node1 # [ 6.777728] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... node1 # [ 6.787727] systemd[1]: Starting Remount Root and Kernel File Systems... node1 # [ 6.792986] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 6.804066] systemd[1]: Starting Coldplug All udev Devices... node1 # [ 6.815496] systemd-journald[285]: Collecting audit messages is enabled. node1 # [ 6.822839] systemd[1]: Listening on Journal Log Access Socket. node1 # [ 6.826067] systemd[1]: Mounted Huge Pages File System. node1 # [ 6.830105] systemd[1]: Mounted POSIX Message Queue File System. node1 # [ 6.835108] systemd[1]: Mounted Kernel Debug File System. node1 # [ 6.699206] systemd[1]: Queued start job for default target Multi-User System. node1 # [ 6.700603] systemd[1]: systemd-journald.service: Deactivated successfully. node1 # [ 6.847285] systemd[1]: Started Journal Service. node1 # [ 6.710559] systemd[1]: Mounted Kernel Trace File System. node1 # [ 6.711515] systemd[1]: Finished Create List of Static Device Nodes. node1 # [ 6.856047] loop: module loaded node1 # [ 6.716198] systemd[1]: modprobe@configfs.service: Deactivated successfully. node1 # [ 6.719556] systemd-modules-load[286]: Inserted module 'loop' node1 # [ 6.721139] systemd[1]: Finished Load Kernel Module configfs. node1 # [ 6.725130] systemd[1]: Mounted FUSE Control File System. node1 # [ 6.742071] systemd[1]: Mounting Kernel Configuration File System... node1 # [ 6.745917] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... node1 # [ 6.747494] systemd-modules-load[286]: Inserted module 'tls' node1 # [ 6.766185] systemd[1]: Finished Load Kernel Modules. node1 # [ 6.912920] EXT4-fs (vda): re-mounted 1a69e85f-2848-4587-8464-1c540d47f612. node1 # [ 6.776079] systemd[1]: Starting Firewall... node1 # [ 6.781162] systemd[1]: Starting Apply Kernel Variables... node1 # [ 6.786165] systemd[1]: Finished Remount Root and Kernel File Systems. node1 # [ 6.787163] systemd[1]: Listening on Disk Image Download Service Socket. node1 # [ 6.795427] systemd-oomd[288]: No swap; memory pressure usage will be degraded node1 # [ 6.808046] systemd[1]: Starting Flush Journal to Persistent Storage... node1 # [ 6.808976] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore node1 # [ 6.815219] systemd[1]: Starting Load/Save OS Random Seed... node1 # [ 6.816125] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 6.817422] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. node1 # [ 7.022071] systemd-journald[285]: Received client request to flush runtime journal. node1 # [ 6.976499] systemd[1]: Mounted Kernel Configuration File System. node1 # [ 6.978683] systemd[1]: Finished Load/Save OS Random Seed. node1 # [ 6.980218] systemd[1]: Reached target First Boot Complete. node1 # [ 6.982086] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. node1 # [ 6.985081] systemd[1]: Finished Apply Kernel Variables. node1 # [ 6.985856] systemd[1]: Starting Create Static Device Nodes in /dev... node1 # [ 6.987515] systemd[1]: Finished Flush Journal to Persistent Storage. node1 # [ 7.075743] systemd[1]: Finished Coldplug All udev Devices. node1 # [ 7.086288] systemd[1]: Finished Create Static Device Nodes in /dev. node1 # [ 7.087717] systemd[1]: Reached target Preparation for Local File Systems. node1 # [ 7.090562] systemd[1]: Starting Rule-based Manager for Device Events and Files... node1 # [ 7.135387] systemd-udevd[324]: Using default interface naming scheme 'v261'. node1 # [ 7.185077] systemd[1]: Started Rule-based Manager for Device Events and Files. node1 # [ 7.301097] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse node1 # [ 7.396166] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. node1 # [ 7.404061] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. node1 # [ 7.443887] (udev-worker)[348]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. node1 # [ 7.447181] (udev-worker)[348]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 7.450975] (udev-worker)[353]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 7.475105] systemd[1]: Mounting /run/wrappers... node1 # [ 7.516849] systemd[1]: Mounted /run/wrappers. node1 # [ 7.517609] systemd[1]: Reached target Local File Systems. node1 # [ 7.521179] systemd[1]: Listening on Boot Loader Control Service Socket. node1 # [ 7.525146] systemd[1]: Starting register-nix-paths.service... node1 # [ 7.531085] systemd[1]: Starting Create SUID/SGID Wrappers... node1 # [ 7.531951] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. node1 # [ 7.538116] systemd[1]: Starting Save Transient machine-id to Disk... node1 # [ 7.550500] systemd[1]: Starting Create System Files and Directories... node1 # [ 7.636761] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. node1 # [ 7.643558] systemd[1]: Finished Save Transient machine-id to Disk. node1 # [ 7.687401] systemd[1]: Condition check resulted in Virtio network device being skipped. node1 # [ 7.689556] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore node1 # [ 7.692383] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. node1 # [ 7.695193] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 node1 # [ 7.697723] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore node1 # [ 7.700145] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.702389] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.704186] systemd[1]: Finished Create System Files and Directories. node1 # [ 7.712356] systemd[1]: Starting Rebuild Journal Catalog... node1 # [ 7.719423] systemd[1]: Starting Record System Boot/Shutdown in UTMP... node1 # [ 7.812348] systemd[1]: Finished Record System Boot/Shutdown in UTMP. node1 # [ 7.840140] systemd[1]: Finished Rebuild Journal Catalog. node1 # [ 7.846387] systemd[1]: Starting Update is Completed... node1 # [ 7.897871] systemd[1]: Finished Update is Completed. node1 # [ 8.087476] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 node1 # [ 8.099343] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console node1 # [ 8.121629] mousedev: PS/2 mouse device common for all mice node1 # [ 8.127698] rtc_cmos PNP0B00:00: RTC can wake from S4 node1 # [ 8.138527] ACPI: button: Power Button [PWRF] node1 # [ 8.193713] systemd[1]: Finished Firewall. node1 # [ 8.163979] rtc_cmos PNP0B00:00: registered as rtc0 node1 # [ 8.164043] rtc_cmos PNP0B00:00: setting system clock to 2026-09-13T07:09:55 UTC (1789283395) node1 # [ 8.164126] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs node1 # [ 8.165158] systemd-journald[285]: Time jumped backwards, rotating. node1 # [ 8.184819] parport_pc 00:02: reported by Plug and Play ACPI node1 # [ 8.230653] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] node1 # [ 8.237307] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input4 node1 # [ 8.320674] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized node1 # [ 8.286989] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. node1 # [ 8.290137] systemd[1]: Finished Create SUID/SGID Wrappers. node1 # [ 8.358336] Console: switching to colour dummy device 80x25 node1 # [ 8.444662] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt node1 # [ 8.444769] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD node1 # [ 8.320281] systemd[1]: Finished register-nix-paths.service. node1 # [ 8.321844] systemd[1]: Reached target System Initialization. node1 # [ 8.325041] systemd[1]: Started Discard unused filesystem blocks once a week. node1 # [ 8.326111] systemd[1]: Started Daily Cleanup of Temporary Directories. node1 # [ 8.327047] systemd[1]: Reached target Timer Units. node1 # [ 8.327928] systemd[1]: Listening on D-Bus System Message Bus Socket. node1 # [ 8.329128] systemd[1]: Listening on Nix Daemon Socket. node1 # [ 8.330121] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. node1 # [ 8.332125] systemd[1]: Reached target Socket Units. node1 # [ 8.333392] systemd[1]: Reached target Basic System. node1 # [ 8.334402] systemd[1]: Started backdoor.service. node1 # [ 8.339295] systemd[1]: Starting Import lastlog data into lastlog2 database... node1 # [ 8.489520] [drm] Found bochs VGA, ID 0xb0c5. node1 # [ 8.489522] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. node1 # [ 8.492694] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic node1 # [ 8.351447] systemd[1]: Starting Name Service Cache Daemon (nsncd)... node1 # [ 8.357495] systemd[1]: Starting Post-Boot Actions... node1 # [ 8.503089] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 node1 # [ 8.506084] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 node1 # [ 8.514955] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 node1 # [ 8.373484] systemd[1]: Started Reset console on configuration changes. node1 # [ 8.381306] systemd[1]: Starting resolvconf update... node1 # [ 8.409665] systemd[1]: Starting D-Bus System Message Bus... node1 # [ 8.447948] systemd[1]: Finished Post-Boot Actions. node1 # [ 8.455883] nsncd[511]: Sep 13 07:09:55.934 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" node1 # [ 8.466771] systemd[1]: Started Name Service Cache Daemon (nsncd). node1 # connecting to host... node1 # [ 8.480041] systemd[1]: Reached target Host and Network Name Lookups. node1 # [ 8.483507] systemd[1]: Reached target User and Group Name Lookups. node1 # [ 8.500078] systemd[1]: Starting User Login Management... node1 # [ 8.507621] systemd[1]: Starting Virtual Console Setup... node1: Guest shell says: b'Spawning backdoor root shell...\n' node1: connected to guest root shell node1: (connecting took 9.19 seconds) node1: (finished: waiting for the VM to finish booting, in 9.19 seconds) node1 # [ 8.552248] systemd[1]: Finished Import lastlog data into lastlog2 database. node1 # [ 8.598595] dbus-broker-launch[517]: Looking up NSS user entry for 'systemd-timesync'... node1 # [ 8.614093] dbus-broker-launch[517]: NSS returned no entry for 'systemd-timesync' node1 # [ 8.615148] dbus-broker-launch[517]: Invalid user-name in /nix/store/xsi2sry47c6lv8ixsrsbc54g592jvx99-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" node1 # [ 8.834429] Console: switching to colour frame buffer device 160x50 node1 # [ 8.867711] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device node1 # [ 8.665716] systemd[1]: Started D-Bus System Message Bus. node1 # [ 8.728638] systemd-logind[537]: Watching system buttons on /dev/input/event2 (Power Button) node1 # [ 8.731668] systemd-logind[537]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) node1 # [ 8.736943] dbus-broker-launch[517]: Ready node1 # [ 8.738370] systemd[1]: Stopped target Host and Network Name Lookups. node1 # [ 8.742208] systemd[1]: Stopping Host and Network Name Lookups... node1 # [ 8.743055] systemd[1]: Stopped target User and Group Name Lookups. node1 # [ 8.743864] systemd[1]: Stopping User and Group Name Lookups... node1 # [ 8.744863] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... node1 # [ 8.746466] systemd[1]: nscd.service: Deactivated successfully. node1 # [ 8.747813] systemd[1]: Stopped Name Service Cache Daemon (nsncd). node1 # [ 8.750154] systemd-logind[537]: New seat seat0. node1 # [ 8.750844] systemd[1]: Starting Name Service Cache Daemon (nsncd)... node1 # [ 8.751775] systemd[1]: Started User Login Management. node1 # [ 8.753104] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 8.754703] systemd[1]: Stopped Virtual Console Setup. node1 # [ 8.766925] systemd[1]: Starting linger-users.service... node1 # [ 8.772733] systemd[1]: Starting Virtual Console Setup... node1 # [ 8.956045] ppdev: user-space parallel port driver node1 # [ 8.819227] systemd[1]: Finished resolvconf update. node1 # [ 8.819982] systemd[1]: Reached target Preparation for Network. node1 # [ 8.827375] systemd[1]: Starting DHCP Client... node1 # [ 8.833962] systemd[1]: Starting Address configuration of eth1... node1 # [ 8.840566] systemd[1]: Starting Extra networking commands.... node1 # [ 8.843304] nsncd[601]: Sep 13 07:09:56.321 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" node1 # [ 8.849319] systemd[1]: Started Name Service Cache Daemon (nsncd). node1 # [ 8.850187] systemd[1]: linger-users.service: Deactivated successfully. node1 # [ 8.858064] systemd[1]: Finished linger-users.service. node1 # [ 8.871217] systemd[1]: Reached target Host and Network Name Lookups. node1 # [ 8.872106] systemd[1]: Reached target User and Group Name Lookups. node1 # [ 9.068214] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) node1 # [ 8.932659] systemd-logind[537]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) node1 # [ 8.982963] network-addresses-eth1-start[614]: adding address 192.168.1.1/24... done node1 # [ 8.995143] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 8.996923] systemd[1]: Stopped Virtual Console Setup. node1 # [ 9.143742] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) node1 # [ 9.011560] systemd[1]: Starting Virtual Console Setup... node1 # [ 9.016290] network-addresses-eth1-start[614]: adding address 2001:db8:1::1/64... done node1 # [ 9.049156] systemd[1]: Finished Address configuration of eth1. node1 # [ 9.124681] dhcpcd[637]: dhcpcd-10.3.2 starting node1 # [ 9.148394] dhcpcd[693]: dev: loaded udev node1 # [ 9.168073] systemd[1]: Finished Extra networking commands.. node1 # [ 9.170191] systemd[1]: Reached target Network. node1 # [ 9.175177] systemd[1]: Starting Nginx Web Server... node1 # [ 9.179557] systemd[1]: Starting PostgreSQL Server... node1 # [ 9.183751] systemd[1]: Starting Permit User Sessions... node1 # [ 9.341057] 8021q: 802.1Q VLAN Support v1.8 node1 # [ 9.341524] 8021q: adding VLAN 0 to HW filter on device eth1 node1 # [ 9.345565] kvm_amd: TSC scaling supported node1 # [ 9.350405] kvm_amd: Nested Virtualization enabled node1 # [ 9.350855] kvm_amd: Nested Paging enabled node1 # [ 9.353897] kvm_amd: LBR virtualization supported node1 # [ 9.354382] kvm_amd: Virtual VMLOAD VMSAVE supported node1 # [ 9.354826] kvm_amd: Virtual GIF supported node1 # [ 9.357072] kvm_amd: Virtual NMI enabled node1 # [ 9.291276] systemd[1]: Finished Permit User Sessions. node1 # [ 9.300106] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. node1 # [ 9.308303] systemd[1]: Started Getty on tty1. node1 # [ 9.310901] systemd[1]: Reached target Login Prompts. node1 # [ 9.477029] EDAC MC: Ver: 3.0.0 node1 # [ 9.519551] cfg80211: Loading compiled-in X.509 certificates for regulatory database node1 # [ 9.557905] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' node1 # [ 9.558613] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' node1 # [ 9.561999] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 node1 # [ 9.562825] cfg80211: failed to load regulatory.db node1 # [ 9.460273] nginx-pre-start[711]: nginx: the configuration file /nix/store/9f2r227z3ixwsz7m0n9c97am5n26hwrr-nginx.conf syntax is ok node1 # [ 9.462593] nginx-pre-start[711]: nginx: configuration file /nix/store/9f2r227z3ixwsz7m0n9c97am5n26hwrr-nginx.conf test is successful node1 # [ 9.472110] systemd[1]: Started Nginx Web Server. node1 # [ 9.634371] 8021q: adding VLAN 0 to HW filter on device eth0 node1 # [ 9.494388] dhcpcd[693]: eth0: waiting for carrier node1 # [ 9.495126] dhcpcd[693]: eth0: carrier acquired node1 # [ 9.511080] dhcpcd[693]: DUID 00:01:00:01:32:39:08:c4:52:54:00:12:34:56 node1 # [ 9.512028] dhcpcd[693]: eth0: IAID 00:12:34:56 node1 # [ 9.512716] dhcpcd[693]: eth0: adding address fe80::5054:ff:fe12:3456 node1 # [ 9.529324] postgresql-pre-start[714]: The files belonging to this database system will be owned by user "postgres". node1 # [ 9.530883] postgresql-pre-start[714]: This user must also own the server process. node1 # [ 9.535100] postgresql-pre-start[714]: The database cluster will be initialized with locale "en_US.UTF-8". node1 # [ 9.537081] dhcpcd[693]: eth0: soliciting a DHCP lease node1 # [ 9.537791] postgresql-pre-start[714]: The default database encoding has accordingly been set to "UTF8". node1 # [ 9.539052] postgresql-pre-start[714]: The default text search configuration will be set to "english". node1 # [ 9.540153] postgresql-pre-start[714]: Data page checksums are enabled. node1 # [ 9.541020] postgresql-pre-start[714]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok node1 # [ 9.542901] postgresql-pre-start[714]: creating subdirectories ... ok node1 # [ 9.544524] postgresql-pre-start[714]: selecting dynamic shared memory implementation ... posix node1 # [ 9.706008] NET: Registered PF_PACKET protocol family node1 # [ 9.574510] dhcpcd[693]: eth0: offered 10.0.2.15 from 10.0.2.2 node1 # [ 9.576155] dhcpcd[693]: eth0: probing address 10.0.2.15/24 node1 # [ 9.623872] postgresql-pre-start[714]: selecting default "max_connections" ... 100 node1 # [ 9.658747] systemd-vconsole-setup[658]: Configuration of first virtual console was skipped, ignoring remaining ones. node1 # [ 9.663236] systemd[1]: Finished Virtual Console Setup. node1 # [ 9.675987] postgresql-pre-start[714]: selecting default "shared_buffers" ... 128MB node1 # [ 10.330522] postgresql-pre-start[714]: selecting default time zone ... UTC node1 # [ 10.333301] postgresql-pre-start[714]: creating configuration files ... ok node1 # [ 10.502097] postgresql-pre-start[714]: running bootstrap script ... ok node1 # [ 10.926951] postgresql-pre-start[714]: performing post-bootstrap initialization ... ok node1 # [ 11.063725] postgresql-pre-start[714]: syncing data to disk ... ok node1 # [ 11.064699] postgresql-pre-start[714]: initdb: warning: enabling "trust" authentication for local connections node1 # [ 11.065878] postgresql-pre-start[714]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. node1 # [ 11.067767] postgresql-pre-start[714]: Success. You can now start the database server using: node1 # [ 11.068797] postgresql-pre-start[714]: pg_ctl -D /var/lib/postgresql/18 -l logfile start node1 # [ 11.139582] dhcpcd[693]: eth0: soliciting an IPv6 router node1 # [ 11.140368] dhcpcd[693]: eth0: Router Advertisement from fe80::2 node1 # [ 11.141195] dhcpcd[693]: eth0: adding address fec0::5054:ff:fe12:3456/64 node1 # [ 11.142082] dhcpcd[693]: eth0: adding route to fec0::/64 node1 # [ 11.142847] dhcpcd[693]: eth0: adding default route via fe80::2 node1 # [ 11.147067] postgres[763]: [763] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit node1 # [ 11.151819] postgres[763]: [763] LOG: listening on IPv6 address "::1", port 5432 node1 # [ 11.152918] postgres[763]: [763] LOG: listening on IPv4 address "127.0.0.1", port 5432 node1 # [ 11.158143] postgres[763]: [763] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" node1 # [ 11.169280] postgres[772]: [772] LOG: database system was shut down at 2026-09-13 07:09:58 GMT node1 # [ 11.175047] postgres[763]: [763] LOG: database system is ready to accept connections node1 # [ 11.179817] systemd[1]: Started PostgreSQL Server. node1 # [ 11.185993] systemd[1]: Starting PostgreSQL Setup Scripts... node1 # [ 11.308379] postgresql-setup-start[783]: CREATE DATABASE node1 # [ 11.335770] postgresql-setup-start[788]: CREATE ROLE node1 # [ 11.348139] postgresql-setup-start[790]: ALTER DATABASE node1 # [ 11.352608] systemd[1]: Finished PostgreSQL Setup Scripts. node1 # [ 11.354399] systemd[1]: Reached target PostgreSQL. node1 # [ 11.356857] systemd[1]: Starting Buildbot Continuous Integration Server.... node1 # [ 11.381736] buildbot-master-pre-start[795]: mkdir: created directory '/var/lib/buildbot/master' node1 # [ 13.564518] buildbot-master-pre-start[797]: updating existing installation node1 # [ 13.565489] buildbot-master-pre-start[797]: not touching existing buildbot.tac node1 # [ 13.566369] buildbot-master-pre-start[797]: creating buildbot.tac.new instead node1 # [ 13.567273] buildbot-master-pre-start[797]: creating /var/lib/buildbot/master/master.cfg.sample node1 # [ 13.570081] buildbot-master-pre-start[797]: creating database (postgresql://@/buildbot) node1 # [ 13.571144] buildbot-master-pre-start[797]: buildmaster configured in /var/lib/buildbot/master node1 # [ 13.752919] systemd[1]: Started Buildbot Continuous Integration Server.. node1: (finished: waiting for unit buildbot-master, in 14.71 seconds) ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. File "/nix/store/q8bka5k1zvss9dd482k8ivsflp9lkmxw-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 node1: waiting for success: curl --fail -s --head localhost:8010 ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. File "/nix/store/q8bka5k1zvss9dd482k8ivsflp9lkmxw-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 node1 # [ 14.380583] dhcpcd[693]: eth0: leased 10.0.2.15 for 86400 seconds node1 # [ 14.381941] dhcpcd[693]: eth0: adding route to 10.0.2.0/24 node1 # [ 14.383269] dhcpcd[693]: eth0: adding default route via 10.0.2.2 node1 # [ 14.484938] systemd[1]: Started DHCP Client. node1 # [ 14.488604] systemd[1]: Reached target Multi-User System. node1 # [ 14.490271] systemd[1]: Startup finished in 846ms (kernel) + 4.531s (initrd) + 9.111s (userspace) = 14.490s. node1 # [ 15.055627] twistd[817]: 2026-09-13T07:10:01+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... node1 # [ 15.057624] twistd[817]: 2026-09-13T07:10:02+0000 [-] Loaded. node1 # [ 15.058519] twistd[817]: 2026-09-13T07:10:02+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14 3.14.7) starting up. node1 # [ 15.060990] twistd[817]: 2026-09-13T07:10:02+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. node1 # [ 15.062894] twistd[817]: 2026-09-13T07:10:02+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 node1 # [ 15.067493] twistd[817]: 2026-09-13T07:10:02+0000 [-] Loading configuration from '/nix/store/xlczy4q5s5fm6bcs110dg4akkak76fy8-master.cfg' node1 # [ 15.447149] twistd[817]: 2026-09-13T07:10:02+0000 [buildbot_nix.github_projects#info] ~project-id-map~ is not present, GitHub project reload will follow. node1 # [ 15.451974] twistd[817]: 2026-09-13T07:10:02+0000 [-] Setting up database with URL 'postgresql://@/buildbot' node1 # [ 15.504644] twistd[817]: 2026-09-13T07:10:02+0000 [-] adding 2 new builders, removing 0 node1 # [ 15.528081] twistd[817]: 2026-09-13T07:10:03+0000 [-] adding 4 new services, removing 0 node1 # [ 15.631643] twistd[817]: 2026-09-13T07:10:03+0000 [-] adding 4 new schedulers, removing 0 node1 # [ 15.668804] twistd[817]: 2026-09-13T07:10:03+0000 [-] PeriodicWithStartup scheduler : missed scheduled build time - building immediately node1 # [ 15.689752] twistd[817]: 2026-09-13T07:10:03+0000 [-] BuildbotSite starting on 8010 node1 # [ 15.690891] twistd[817]: 2026-09-13T07:10:03+0000 [buildbot.www.service.BuildbotSite#info] Starting factory node1 # [ 15.693394] twistd[817]: 2026-09-13T07:10:03+0000 [-] adding 17 new workers, removing 0 node1 # [ 15.711101] twistd[817]: 2026-09-13T07:10:03+0000 [-] PBServerFactory starting on 9989 node1 # [ 15.713052] twistd[817]: 2026-09-13T07:10:03+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory node1 # [ 15.724195] twistd[817]: 2026-09-13T07:10:03+0000 [-] added buildset 1 to database node1 # [ 15.785549] twistd[817]: 2026-09-13T07:10:03+0000 [-] Starting Worker -- version: 2026.09.13 node1 # [ 15.786708] twistd[817]: 2026-09-13T07:10:03+0000 [-] recording hostname in twistd.hostname node1 # [ 15.788248] twistd[817]: 2026-09-13T07:10:03+0000 [-] message from master: attached node1 # [ 15.790749] twistd[817]: 2026-09-13T07:10:03+0000 [-] Got workerinfo from '__Janitor' node1 # [ 15.801031] twistd[817]: 2026-09-13T07:10:03+0000 [-] bot attached node1 # [ 15.801853] twistd[817]: 2026-09-13T07:10:03+0000 [-] Worker __Janitor attached to __Janitor node1 # [ 15.802841] twistd[817]: 2026-09-13T07:10:03+0000 [-] message from master: attached node1 # [ 15.894926] twistd[817]: 2026-09-13T07:10:03+0000 [-] BuildMaster is running node1: (finished: waiting for success: curl --fail -s --head localhost:8010, in 2.11 seconds) (finished: run the VM test script, in 17.05 seconds) test script finished in 17.09s cleanup kill QemuMachine (pid 46) node1 # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14) node1 # [2026-09-13T07:10:04Z INFO virtiofsd] Client disconnected, shutting down node1 # [2026-09-13T07:10:04Z INFO virtiofsd] Client disconnected, shutting down node1 # [2026-09-13T07:10:04Z INFO virtiofsd] Client disconnected, shutting down (finished: cleanup, in 0.21 seconds) additionally exposed symbols: node1, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh