tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600.0 seconds run the VM test script start all VMs node1: starting vm node1 # Disk image does not exist, creating the virtualisation disk image... node1: QEMU running (pid 46) node1 # Formatting '/build/vm-state-node1/tmp.5HO8a7Y2EV', fmt=raw size=1073741824 node1 # mke2fs 1.47.4 (6-Mar-2025) node1 # Discarding device blocks: 0/262144 done node1 # Creating filesystem with 262144 4k blocks and 65536 inodes node1 # Filesystem UUID: 32c977aa-e8c2-4c1e-af3f-a51bc16721e4 node1 # Superblock backups stored on blocks: node1 # 32768, 98304, 163840, 229376 node1 # (finished: start all VMs, in 0.21 seconds) node1 # Allocating group tables: 0/8 done node1 # Writing inode tables: 0/8 done node1 # Creating journal (8192 blocks): done node1 # Writing superblocks and filesystem accounting information: 0/8 done node1 # node1 # Virtualisation disk image created. node1 # Starting virtiofs daemons... node1 # [2026-09-20T07:26:26Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) node1: waiting for unit buildbot-master node1: waiting for the VM to finish booting node1 # [2026-09-20T07:26:26Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether node1 # [2026-09-20T07:26:26Z INFO virtiofsd] Waiting for vhost-user socket connection... node1 # [2026-09-20T07:26:26Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) node1 # [2026-09-20T07:26:26Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether node1 # [2026-09-20T07:26:26Z INFO virtiofsd] Waiting for vhost-user socket connection... node1 # [2026-09-20T07:26:26Z WARN virtiofsd::passthrough] Failed to open file handle for the root node: Operation not permitted (os error 1) node1 # [2026-09-20T07:26:26Z WARN virtiofsd::passthrough] File handles do not appear safe to use, disabling file handles altogether node1 # [2026-09-20T07:26:26Z INFO virtiofsd] Waiting for vhost-user socket connection... node1 # [2026-09-20T07:26:26Z INFO virtiofsd] Client connected, servicing requests node1 # [2026-09-20T07:26:26Z INFO virtiofsd] Client connected, servicing requests node1 # [2026-09-20T07:26:26Z INFO virtiofsd] Client connected, servicing requests node1 # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) node1 # node1 # node1 # iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+3EFCC730+3EF2C730 CA00 node1 # Press Ctrl-B to configure iPXE (PCI 00:02.0)... node1 # node1 # node1 # node1 # node1 # iPXE (http://ipxe.org) 00:05.0 CB00 PCI2.10 PnP PMM 3EFCC730 3EF2C730 CB00 node1 # Press Ctrl-B to configure iPXE (PCI 00:05.0)... node1 # node1 # node1 # Booting from ROM... node1 # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.52 (nixbld@localhost) (gcc (GCC) 15.3.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Mon Sep 14 11:36:19 UTC 2026 node1 # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/wi1ykkdzbg5jfjh375n4gc38f6k65s9n-nixos-system-node1-test/init regInfo=/nix/store/hkvd4b0112iywxk6h3i2vxpz83kcjmpc-closure-info/registration console=ttyS0,115200n8 console=tty0 node1 # [ 0.000000] BIOS-provided physical RAM map: node1 # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable node1 # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable node1 # [ 0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved node1 # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved node1 # [ 0.000000] NX (Execute Disable) protection: active node1 # [ 0.000000] APIC: Static calls initialized node1 # [ 0.000000] SMBIOS 2.8 present. node1 # [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 node1 # [ 0.000000] DMI: Memory slots populated: 1/1 node1 # [ 0.000000] Hypervisor detected: KVM node1 # [ 0.000000] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 node1 # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 node1 # [ 0.000001] kvm-clock: using sched offset of 480948505 cycles node1 # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns node1 # [ 0.000005] tsc: Detected 2400.012 MHz processor node1 # [ 0.000815] last_pfn = 0x3ffd8 max_arch_pfn = 0x10000000000 node1 # [ 0.000842] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs node1 # [ 0.000844] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT node1 # [ 0.002745] found SMP MP-table at [mem 0x000f5450-0x000f545f] node1 # [ 0.002756] Using GB pages for direct mapping node1 # [ 0.002802] RAMDISK: [mem 0x3e370000-0x3ffcffff] node1 # [ 0.002811] ACPI: Early table checksum verification disabled node1 # [ 0.002814] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) node1 # [ 0.002818] ACPI: RSDT 0x000000003FFE2422 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002822] ACPI: FACP 0x000000003FFE221A 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002829] ACPI: DSDT 0x000000003FFE0040 0021DA (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002831] ACPI: FACS 0x000000003FFE0000 000040 node1 # [ 0.002832] ACPI: APIC 0x000000003FFE230E 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002834] ACPI: HPET 0x000000003FFE2386 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002835] ACPI: MCFG 0x000000003FFE23BE 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002837] ACPI: WAET 0x000000003FFE23FA 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) node1 # [ 0.002838] ACPI: Reserving FACP table memory at [mem 0x3ffe221a-0x3ffe230d] node1 # [ 0.002839] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2219] node1 # [ 0.002840] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] node1 # [ 0.002840] ACPI: Reserving APIC table memory at [mem 0x3ffe230e-0x3ffe2385] node1 # [ 0.002841] ACPI: Reserving HPET table memory at [mem 0x3ffe2386-0x3ffe23bd] node1 # [ 0.002841] ACPI: Reserving MCFG table memory at [mem 0x3ffe23be-0x3ffe23f9] node1 # [ 0.002842] ACPI: Reserving WAET table memory at [mem 0x3ffe23fa-0x3ffe2421] node1 # [ 0.003076] No NUMA configuration found node1 # [ 0.003077] Faking a node at [mem 0x0000000000000000-0x000000003ffd7fff] node1 # [ 0.003080] NODE_DATA(0) allocated [mem 0x3ffd2780-0x3ffd7cff] node1 # [ 0.005425] Zone ranges: node1 # [ 0.005426] DMA [mem 0x0000000000001000-0x0000000000ffffff] node1 # [ 0.005427] DMA32 [mem 0x0000000001000000-0x000000003ffd7fff] node1 # [ 0.005428] Normal empty node1 # [ 0.005429] Device empty node1 # [ 0.005430] Movable zone start for each node node1 # [ 0.005431] Early memory node ranges node1 # [ 0.005431] node 0: [mem 0x0000000000001000-0x000000000009efff] node1 # [ 0.005432] node 0: [mem 0x0000000000100000-0x000000003ffd7fff] node1 # [ 0.005433] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff] node1 # [ 0.005457] On node 0, zone DMA: 1 pages in unavailable ranges node1 # [ 0.005734] On node 0, zone DMA: 97 pages in unavailable ranges node1 # [ 0.024077] On node 0, zone DMA32: 40 pages in unavailable ranges node1 # [ 0.024539] ACPI: PM-Timer IO Port: 0x608 node1 # [ 0.024549] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) node1 # [ 0.024576] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 node1 # [ 0.024578] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) node1 # [ 0.024580] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) node1 # [ 0.024581] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) node1 # [ 0.024582] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) node1 # [ 0.024583] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) node1 # [ 0.024585] ACPI: Using ACPI (MADT) for SMP configuration information node1 # [ 0.024586] ACPI: HPET id: 0x8086a201 base: 0xfed00000 node1 # [ 0.024589] TSC deadline timer available node1 # [ 0.024594] CPU topo: Max. logical packages: 1 node1 # [ 0.024594] CPU topo: Max. logical dies: 1 node1 # [ 0.024595] CPU topo: Max. dies per package: 1 node1 # [ 0.024598] CPU topo: Max. threads per core: 1 node1 # [ 0.024599] CPU topo: Num. cores per package: 1 node1 # [ 0.024599] CPU topo: Num. threads per package: 1 node1 # [ 0.024599] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs node1 # [ 0.024618] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() node1 # [ 0.024648] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] node1 # [ 0.024650] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] node1 # [ 0.024652] [mem 0x40000000-0xafffffff] available for PCI devices node1 # [ 0.024653] Booting paravirtualized kernel on KVM node1 # [ 0.024656] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns node1 # [ 0.029145] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 node1 # [ 0.031381] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 node1 # [ 0.031427] kvm-guest: PV spinlocks disabled, single CPU node1 # [ 0.031429] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/wi1ykkdzbg5jfjh375n4gc38f6k65s9n-nixos-system-node1-test/init regInfo=/nix/store/hkvd4b0112iywxk6h3i2vxpz83kcjmpc-closure-info/registration console=ttyS0,115200n8 console=tty0 node1 # [ 0.031528] Unknown kernel command line parameters "regInfo=/nix/store/hkvd4b0112iywxk6h3i2vxpz83kcjmpc-closure-info/registration", will be passed to user space. node1 # [ 0.031540] random: crng init done node1 # [ 0.031541] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes node1 # [ 0.032644] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) node1 # [ 0.032657] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) node1 # [ 0.032690] Fallback order for Node 0: 0 node1 # [ 0.032693] Built 1 zonelists, mobility grouping on. Total pages: 262006 node1 # [ 0.032695] Policy zone: DMA32 node1 # [ 0.035473] mem auto-init: stack:all(zero), heap alloc:on, heap free:off node1 # [ 0.037963] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 node1 # [ 0.040280] allocated 2097152 bytes of page_ext node1 # [ 0.050093] ftrace: allocating 48787 entries in 192 pages node1 # [ 0.050095] ftrace: allocated 192 pages with 2 groups node1 # [ 0.050941] Dynamic Preempt: lazy node1 # [ 0.051105] rcu: Preemptible hierarchical RCU implementation. node1 # [ 0.051106] rcu: RCU event tracing is enabled. node1 # [ 0.051107] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. node1 # [ 0.051108] Trampoline variant of Tasks RCU enabled. node1 # [ 0.051109] Rude variant of Tasks RCU enabled. node1 # [ 0.051109] Tracing variant of Tasks RCU enabled. node1 # [ 0.051110] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. node1 # [ 0.051110] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 node1 # [ 0.051127] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.051128] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.051129] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. node1 # [ 0.055584] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 node1 # [ 0.055871] rcu: srcu_init: Setting srcu_struct sizes based on contention. node1 # [ 0.055878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns node1 # [ 0.055985] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) node1 # [ 0.059538] Console: colour VGA+ 80x25 node1 # [ 0.059540] printk: legacy console [tty0] enabled node1 # [ 0.089111] printk: legacy console [ttyS0] enabled node1 # [ 0.194624] ACPI: Core revision 20250807 node1 # [ 0.195559] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns node1 # [ 0.197169] APIC: Switch to symmetric I/O mode setup node1 # [ 0.198165] x2apic enabled node1 # [ 0.198952] APIC: Switched APIC routing to: physical x2apic node1 # [ 0.200841] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 node1 # [ 0.201906] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns node1 # [ 0.203652] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) node1 # [ 0.205652] x86/cpu: User Mode Instruction Prevention (UMIP) activated node1 # [ 0.206772] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 node1 # [ 0.207649] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 node1 # [ 0.208653] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto node1 # [ 0.209649] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl node1 # [ 0.210649] Transient Scheduler Attacks: Vulnerable: No microcode node1 # [ 0.211648] Spectre V2 : Mitigation: Enhanced / Automatic IBRS node1 # [ 0.212648] Speculative Return Stack Overflow: Mitigation: Safe RET node1 # [ 0.213648] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization node1 # [ 0.215656] Spectre V2 : Enabling IBPB for BPF node1 # [ 0.217232] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier node1 # [ 0.217649] active return thunk: srso_alias_return_thunk node1 # [ 0.218671] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' node1 # [ 0.219649] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' node1 # [ 0.220648] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' node1 # [ 0.221653] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' node1 # [ 0.223366] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' node1 # [ 0.224357] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' node1 # [ 0.225438] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' node1 # [ 0.226649] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 node1 # [ 0.227648] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 node1 # [ 0.228649] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 node1 # [ 0.229649] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 node1 # [ 0.230649] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 node1 # [ 0.231648] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. node1 # [ 0.267134] Freeing SMP alternatives memory: 44K node1 # [ 0.267652] pid_max: default: 32768 minimum: 301 node1 # [ 0.268753] LSM: initializing lsm=capability,landlock,yama,bpf,ima node1 # [ 0.269761] landlock: Up and running. node1 # [ 0.270649] Yama: becoming mindful. node1 # [ 0.271488] LSM support for eBPF active node1 # [ 0.272284] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) node1 # [ 0.272669] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) node1 # [ 0.275976] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) node1 # [ 0.277270] Performance Events: Fam17h+ core perfctr, AMD PMU driver. node1 # [ 0.277658] ... version: 2 node1 # [ 0.278408] ... bit width: 48 node1 # [ 0.278651] ... generic counters: 6 node1 # [ 0.279388] ... generic bitmap: 000000000000003f node1 # [ 0.279651] ... fixed-purpose counters: 0 node1 # [ 0.280413] ... fixed-purpose bitmap: 0000000000000000 node1 # [ 0.280651] ... value mask: 0000ffffffffffff node1 # [ 0.281604] ... max period: 00007fffffffffff node1 # [ 0.282398] ... global_ctrl mask: 000000000000003f node1 # [ 0.282765] signal: max sigframe size: 3376 node1 # [ 0.283611] rcu: Hierarchical SRCU implementation. node1 # [ 0.284300] rcu: Max phase no-delay instances is 400. node1 # [ 0.289271] smp: Bringing up secondary CPUs ... node1 # [ 0.289666] smp: Brought up 1 node, 1 CPU node1 # [ 0.290391] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) node1 # [ 0.290864] Memory: 941068K/1048024K available (17247K kernel code, 2727K rwdata, 13616K rodata, 3652K init, 2976K bss, 99580K reserved, 0K cma-reserved) node1 # [ 0.291903] devtmpfs: initialized node1 # [ 0.292766] x86/mm: Memory block size: 128MB node1 # [ 0.294529] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) node1 # [ 0.295600] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). node1 # [ 0.296735] pinctrl core: initialized pinctrl subsystem node1 # [ 0.297879] PM: RTC time: 07:26:26, date: 2026-09-20 node1 # [ 0.301724] NET: Registered PF_NETLINK/PF_ROUTE protocol family node1 # [ 0.303017] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations node1 # [ 0.303669] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations node1 # [ 0.304805] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations node1 # [ 0.305661] audit: initializing netlink subsys (disabled) node1 # [ 0.306932] thermal_sys: Registered thermal governor 'fair_share' node1 # [ 0.306935] thermal_sys: Registered thermal governor 'bang_bang' node1 # [ 0.307653] thermal_sys: Registered thermal governor 'step_wise' node1 # [ 0.308654] audit: type=2000 audit(1789889187.250:1): state=initialized audit_enabled=0 res=1 node1 # [ 0.310655] thermal_sys: Registered thermal governor 'user_space' node1 # [ 0.310657] thermal_sys: Registered thermal governor 'power_allocator' node1 # [ 0.311663] cpuidle: using governor menu node1 # [ 0.313934] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 node1 # [ 0.314896] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff] node1 # [ 0.315654] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry node1 # [ 0.316663] PCI: Using configuration type 1 for base access node1 # [ 0.317832] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. node1 # [ 0.322898] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages node1 # [ 0.323652] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page node1 # [ 0.328653] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages node1 # [ 0.329651] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page node1 # [ 0.340112] ACPI: Added _OSI(Module Device) node1 # [ 0.340653] ACPI: Added _OSI(Processor Device) node1 # [ 0.341423] ACPI: Added _OSI(Processor Aggregator Device) node1 # [ 0.350407] ACPI: 1 ACPI AML tables successfully acquired and loaded node1 # [ 0.354056] ACPI: Interpreter enabled node1 # [ 0.354667] ACPI: PM: (supports S0 S3 S4 S5) node1 # [ 0.355436] ACPI: Using IOAPIC for interrupt routing node1 # [ 0.355717] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug node1 # [ 0.356652] PCI: Using E820 reservations for host bridge windows node1 # [ 0.359791] ACPI: Enabled 2 GPEs in block 00 to 3F node1 # [ 0.368451] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) node1 # [ 0.369449] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] node1 # [ 0.370987] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug LTR] node1 # [ 0.371775] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] node1 # [ 0.372996] PCI host bridge to bus 0000:00 node1 # [ 0.373656] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] node1 # [ 0.374651] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] node1 # [ 0.375651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] node1 # [ 0.376651] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window] node1 # [ 0.377652] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] node1 # [ 0.378651] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] node1 # [ 0.379652] pci_bus 0000:00: root bus resource [bus 00-ff] node1 # [ 0.380700] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint node1 # [ 0.382088] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint node1 # [ 0.384740] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] node1 # [ 0.385663] pci 0000:00:01.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] node1 # [ 0.386672] pci 0000:00:01.0: ROM [mem 0xfebc0000-0xfebcffff pref] node1 # [ 0.388028] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] node1 # [ 0.389362] pci 0000:00:02.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint node1 # [ 0.392693] pci 0000:00:02.0: BAR 0 [io 0xc100-0xc11f] node1 # [ 0.393613] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] node1 # [ 0.394446] pci 0000:00:02.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] node1 # [ 0.395559] pci 0000:00:02.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] node1 # [ 0.397216] pci 0000:00:03.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint node1 # [ 0.398689] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] node1 # [ 0.399610] pci 0000:00:03.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] node1 # [ 0.400467] pci 0000:00:03.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] node1 # [ 0.402161] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint node1 # [ 0.404689] pci 0000:00:04.0: BAR 0 [io 0xc000-0xc07f] node1 # [ 0.405581] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] node1 # [ 0.406471] pci 0000:00:04.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] node1 # [ 0.408124] pci 0000:00:05.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint node1 # [ 0.410548] pci 0000:00:05.0: BAR 0 [io 0xc140-0xc15f] node1 # [ 0.411328] pci 0000:00:05.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] node1 # [ 0.411704] pci 0000:00:05.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] node1 # [ 0.413537] pci 0000:00:05.0: ROM [mem 0xfeb80000-0xfebbffff pref] node1 # [ 0.415027] pci 0000:00:06.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint node1 # [ 0.416693] pci 0000:00:06.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] node1 # [ 0.417699] pci 0000:00:06.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] node1 # [ 0.419205] pci 0000:00:07.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint node1 # [ 0.421038] pci 0000:00:07.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] node1 # [ 0.422465] pci 0000:00:07.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] node1 # [ 0.424144] pci 0000:00:08.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint node1 # [ 0.425653] pci 0000:00:08.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] node1 # [ 0.426673] pci 0000:00:08.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] node1 # [ 0.428216] pci 0000:00:09.0: [1af4:105a] type 00 class 0x018000 conventional PCI endpoint node1 # [ 0.430218] pci 0000:00:09.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] node1 # [ 0.430675] pci 0000:00:09.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] node1 # [ 0.432220] pci 0000:00:0a.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint node1 # [ 0.433695] pci 0000:00:0a.0: BAR 0 [io 0xc080-0xc0bf] node1 # [ 0.434621] pci 0000:00:0a.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] node1 # [ 0.435458] pci 0000:00:0a.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] node1 # [ 0.437091] pci 0000:00:0b.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint node1 # [ 0.439688] pci 0000:00:0b.0: BAR 0 [io 0xc160-0xc17f] node1 # [ 0.440602] pci 0000:00:0b.0: BAR 1 [mem 0xfebda000-0xfebdafff] node1 # [ 0.441469] pci 0000:00:0b.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] node1 # [ 0.443119] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.444309] pci 0000:00:1d.0: BAR 4 [io 0xc180-0xc19f] node1 # [ 0.444879] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.446302] pci 0000:00:1d.1: BAR 4 [io 0xc1a0-0xc1bf] node1 # [ 0.446849] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint node1 # [ 0.448284] pci 0000:00:1d.2: BAR 4 [io 0xc1c0-0xc1df] node1 # [ 0.448908] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint node1 # [ 0.451307] pci 0000:00:1d.7: BAR 0 [mem 0xfebdb000-0xfebdbfff] node1 # [ 0.451932] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint node1 # [ 0.452936] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO node1 # [ 0.453907] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint node1 # [ 0.455608] pci 0000:00:1f.2: BAR 4 [io 0xc1e0-0xc1ff] node1 # [ 0.456421] pci 0000:00:1f.2: BAR 5 [mem 0xfebdc000-0xfebdcfff] node1 # [ 0.456998] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint node1 # [ 0.458311] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f] node1 # [ 0.461778] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 node1 # [ 0.462754] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 node1 # [ 0.463747] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 node1 # [ 0.464749] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 node1 # [ 0.465752] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 node1 # [ 0.466757] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 node1 # [ 0.467754] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 node1 # [ 0.468755] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 node1 # [ 0.469691] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 node1 # [ 0.470666] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 node1 # [ 0.471666] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 node1 # [ 0.472666] ACPI: PCI: Interrupt link GSID configured for IRQ 19 node1 # [ 0.473663] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 node1 # [ 0.474664] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 node1 # [ 0.475663] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 node1 # [ 0.476667] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 node1 # [ 0.478758] iommu: Default domain type: Translated node1 # [ 0.479619] iommu: DMA domain TLB invalidation policy: lazy mode node1 # [ 0.480721] ACPI: bus type USB registered node1 # [ 0.481520] usbcore: registered new interface driver usbfs node1 # [ 0.482407] usbcore: registered new interface driver hub node1 # [ 0.482660] usbcore: registered new device driver usb node1 # [ 0.484303] NetLabel: Initializing node1 # [ 0.484657] NetLabel: domain hash size = 128 node1 # [ 0.485428] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO node1 # [ 0.485723] NetLabel: unlabeled traffic allowed by default node1 # [ 0.486670] PCI: Using ACPI for IRQ routing node1 # [ 0.530727] pci 0000:00:01.0: vgaarb: setting as boot VGA device node1 # [ 0.531647] pci 0000:00:01.0: vgaarb: bridge control possible node1 # [ 0.531647] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none node1 # [ 0.531655] vgaarb: loaded node1 # [ 0.532473] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 node1 # [ 0.533277] hpet0: 3 comparators, 64-bit 100.000000 MHz counter node1 # [ 0.536737] clocksource: Switched to clocksource kvm-clock node1 # [ 0.540344] VFS: Disk quotas dquot_6.6.0 node1 # [ 0.541102] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) node1 # [ 0.542513] pnp: PnP ACPI init node1 # [ 0.543331] ACPI: IRQ 4 override to edge(!), high(!) node1 # [ 0.544336] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved node1 # [ 0.545920] pnp: PnP ACPI: found 5 devices node1 # [ 0.553514] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns node1 # [ 0.555042] clocksource: Switched to clocksource acpi_pm node1 # [ 0.556055] NET: Registered PF_INET protocol family node1 # [ 0.557136] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) node1 # [ 0.574482] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) node1 # [ 0.576086] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) node1 # [ 0.577445] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) node1 # [ 0.578837] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) node1 # [ 0.580126] TCP: Hash tables configured (established 8192 bind 8192) node1 # [ 0.581265] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) node1 # [ 0.582617] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) node1 # [ 0.583798] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) node1 # [ 0.585060] NET: Registered PF_UNIX/PF_LOCAL protocol family node1 # [ 0.586107] NET: Registered PF_XDP protocol family node1 # [ 0.587003] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] node1 # [ 0.588060] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] node1 # [ 0.589141] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] node1 # [ 0.590306] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window] node1 # [ 0.591478] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] node1 # [ 0.592688] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] node1 # [ 0.594503] ACPI: \_SB_.GSIA: Enabled at IRQ 16 node1 # [ 0.596757] ACPI: \_SB_.GSIB: Enabled at IRQ 17 node1 # [ 0.599153] ACPI: \_SB_.GSIC: Enabled at IRQ 18 node1 # [ 0.601205] ACPI: \_SB_.GSID: Enabled at IRQ 19 node1 # [ 0.603023] PCI: CLS 0 bytes, default 64 node1 # [ 0.604037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns node1 # [ 0.605860] Trying to unpack rootfs image as initramfs... node1 # [ 0.650747] Initialise system trusted keyrings node1 # [ 0.651705] workingset: timestamp_bits=40 max_order=18 bucket_order=0 node1 # [ 0.674975] Key type asymmetric registered node1 # [ 0.675746] Asymmetric key parser 'x509' registered node1 # [ 0.676666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) node1 # [ 0.681906] io scheduler mq-deadline registered node1 # [ 0.682689] io scheduler kyber registered node1 # [ 0.685348] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled node1 # [ 0.686640] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A node1 # [ 0.692622] Linux agpgart interface v0.103 node1 # [ 0.693410] ACPI: bus type drm_connector registered node1 # [ 0.696270] usbcore: registered new interface driver usbserial_generic node1 # [ 0.697427] usbserial: USB Serial support registered for generic node1 # [ 0.700810] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. node1 # [ 0.700810] Please enable it if your BIOS has the CPPC option. node1 # [ 0.703064] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled node1 # [ 0.706950] drop_monitor: Initializing network drop monitor service node1 # [ 0.708178] NET: Registered PF_INET6 protocol family node1 # [ 0.713240] Segment Routing with IPv6 node1 # [ 0.713989] In-situ OAM (IOAM) with IPv6 node1 # [ 0.717119] IPI shorthand broadcast: enabled node1 # [ 0.725463] sched_clock: Marking stable (582014978, 142769441)->(801357383, -76572964) node1 # [ 0.728977] registered taskstats version 1 node1 # [ 0.730014] Loading compiled-in X.509 certificates node1 # [ 0.748797] Demotion targets for Node 0: null node1 # [ 0.749696] Key type .fscrypt registered node1 # [ 0.752789] Key type fscrypt-provisioning registered node1 # [ 0.753794] ima: No TPM chip found, activating TPM-bypass! node1 # [ 0.754738] ima: Allocated hash algorithm: sha1 node1 # [ 0.755564] ima: No architecture policies found node1 # [ 0.757797] PM: Magic number: 10:636:420 node1 # [ 0.759443] RAS: Correctable Errors collector initialized. node1 # [ 0.768467] clk: Disabling unused clocks node1 # [ 0.771814] PM: genpd: Disabling unused power domains node1 # [ 0.942841] Freeing initrd memory: 29056K node1 # [ 0.946078] Freeing unused decrypted memory: 2028K node1 # [ 0.948811] Freeing unused kernel image (initmem) memory: 3652K node1 # [ 0.949939] Write protecting the kernel read-only data: 32768k node1 # [ 0.951832] Freeing unused kernel image (text/rodata gap) memory: 1184K node1 # [ 0.953389] Freeing unused kernel image (rodata/data gap) memory: 720K node1 # [ 1.004600] x86/mm: Checked W+X mappings: passed, no W+X pages found. node1 # [ 1.005708] Run /init as init process node1 # [ 1.016684] systemd[1]: Inserted module 'autofs4' node1 # [ 1.036415] fuse: init (API version 7.45) node1 # [ 1.043806] ACPI: \_SB_.GSIG: Enabled at IRQ 22 node1 # [ 1.046211] ACPI: \_SB_.GSIH: Enabled at IRQ 23 node1 # [ 1.049238] ACPI: \_SB_.GSIE: Enabled at IRQ 20 node1 # [ 1.051270] ACPI: \_SB_.GSIF: Enabled at IRQ 21 node1 # [ 1.056902] virtiofs virtio5: discovered new tag: nix-store node1 # [ 1.058448] virtiofs virtio5: virtio_fs_setup_dax: No cache capability node1 # [ 1.065010] virtiofs virtio6: discovered new tag: shared node1 # [ 1.066521] virtiofs virtio6: virtio_fs_setup_dax: No cache capability node1 # [ 1.069908] virtiofs virtio7: discovered new tag: xchg node1 # [ 1.071396] virtiofs virtio7: virtio_fs_setup_dax: No cache capability node1 # [ 1.090600] systemd[1]: Successfully made /usr/ read-only. node1 # [ 1.427175] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) node1 # [ 1.439241] systemd[1]: Detected virtualization kvm. node1 # [ 1.441414] systemd[1]: Detected architecture x86-64. node1 # [ 1.443557] systemd[1]: Running in initrd. node1 # [ 1.446057] systemd[1]: Initializing machine ID from random generator. node1 # [ 1.448988] systemd[1]: Hostname set to . node1 # [ 1.657233] systemd[1]: bpf-restrict-fs: LSM BPF program attached node1 # [ 1.694756] systemd[1]: Queued start job for default target Initrd Default Target. node1 # [ 1.699059] systemd[1]: Created slice Slice /system/modprobe. node1 # [ 1.700319] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. node1 # [ 1.701758] systemd[1]: Expecting device /dev/disk/by-label/nixos... node1 # [ 1.702934] systemd[1]: Reached target Path Units. node1 # [ 1.703847] systemd[1]: Reached target Slice Units. node1 # [ 1.704740] systemd[1]: Reached target Swaps. node1 # [ 1.705559] systemd[1]: Reached target Timer Units. node1 # [ 1.706565] systemd[1]: Listening on D-Bus System Message Bus Socket. node1 # [ 1.707850] systemd[1]: Listening on Journal Socket (/dev/log). node1 # [ 1.709051] systemd[1]: Listening on Journal Sockets. node1 # [ 1.710074] systemd[1]: Listening on udev Control Socket. node1 # [ 1.711185] systemd[1]: Listening on udev Kernel Socket. node1 # [ 1.712204] systemd[1]: Reached target Socket Units. node1 # [ 1.714010] systemd[1]: Starting Create List of Static Device Nodes... node1 # [ 1.717877] systemd[1]: Starting Load Kernel Module configfs... node1 # [ 1.726980] systemd[1]: Starting Journal Service... node1 # [ 1.752969] systemd[1]: Starting Load Kernel Modules... node1 # [ 1.756876] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 1.763757] systemd[1]: Starting Coldplug All udev Devices... node1 # [ 1.773615] systemd-journald[66]: Collecting audit messages is disabled. node1 # [ 1.778053] systemd[1]: Finished Create List of Static Device Nodes. node1 # [ 1.784395] systemd[1]: modprobe@configfs.service: Deactivated successfully. node1 # [ 1.791147] systemd[1]: Finished Load Kernel Module configfs. node1 # [ 1.795196] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config node1 # [ 1.807914] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... node1 # [ 1.820542] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. node1 # [ 1.831964] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev node1 # [ 1.844417] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. node1 # [ 1.853996] systemd[1]: Starting Create Static Device Nodes in /dev... node1 # [ 1.871103] systemd[1]: Finished Load Kernel Modules. node1 # [ 1.877989] systemd[1]: Starting Apply Kernel Variables... node1 # [ 1.893888] systemd[1]: Finished Create Static Device Nodes in /dev. node1 # [ 1.898018] systemd[1]: Started Journal Service. node1 # [ 1.753893] systemd-modules-load[68]: Inserted module 'dm_mod' node1 # [ 1.758976] systemd-modules-load[68]: Inserted module 'virtio_balloon' node1 # [ 1.760281] systemd-modules-load[68]: Inserted module 'virtio_gpu' node1 # [ 1.762549] systemd[1]: Reached target Preparation for Local File Systems. node1 # [ 1.765372] systemd[1]: Reached target Local File Systems. node1 # [ 1.768318] systemd[1]: Starting Create System Files and Directories... node1 # [ 1.776915] systemd[1]: Starting Rule-based Manager for Device Events and Files... node1 # [ 1.782852] systemd[1]: Finished Apply Kernel Variables. node1 # [ 1.800142] systemd[1]: Finished Create System Files and Directories. node1 # [ 1.827059] systemd-udevd[74]: Using default interface naming scheme 'v261'. node1 # [ 1.852071] systemd[1]: Started Rule-based Manager for Device Events and Files. node1 # [ 1.904755] systemd[1]: Finished Coldplug All udev Devices. node1 # [ 1.907141] systemd[1]: Reached target System Initialization. node1 # [ 1.908174] systemd[1]: Reached target Basic System. node1 # [ 2.234243] virtio_blk virtio2: 1/0/0 default/read/poll queues node1 # [ 2.240361] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 node1 # [ 2.244885] virtio_blk virtio2: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) node1 # [ 2.250470] serio: i8042 KBD port at 0x60,0x64 irq 1 node1 # [ 2.254503] ehci-pci 0000:00:1d.7: EHCI Host Controller node1 # [ 2.255385] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 node1 # [ 2.257110] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebdb000 node1 # [ 2.262093] serio: i8042 AUX port at 0x60,0x64 irq 12 node1 # [ 2.264833] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 node1 # [ 2.266122] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 node1 # [ 2.267268] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.271837] usb usb1: Product: EHCI Host Controller node1 # [ 2.272503] usb usb1: Manufacturer: Linux 6.18.52 ehci_hcd node1 # [ 2.273400] usb usb1: SerialNumber: 0000:00:1d.7 node1 # [ 2.274949] hub 1-0:1.0: USB hub found node1 # [ 2.277786] hub 1-0:1.0: 6 ports detected node1 # [ 2.283451] uhci_hcd 0000:00:1d.0: UHCI Host Controller node1 # [ 2.284186] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 node1 # [ 2.299289] uhci_hcd 0000:00:1d.0: detected 2 ports node1 # [ 2.302525] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c180 node1 # [ 2.309474] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 2.310633] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.324112] usb usb2: Product: UHCI Host Controller node1 # [ 2.331809] usb usb2: Manufacturer: Linux 6.18.52 uhci_hcd node1 # [ 2.332556] usb usb2: SerialNumber: 0000:00:1d.0 node1 # [ 2.334699] SCSI subsystem initialized node1 # [ 2.203331] systemd[1]: Starting Virtual Console Setup... node1 # [ 2.347847] hub 2-0:1.0: USB hub found node1 # [ 2.349801] hub 2-0:1.0: 2 ports detected node1 # [ 2.222654] (udev-worker)[89]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 2.372854] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 node1 # [ 2.239624] systemd-vconsole-setup[97]: Configuration of first virtual console was skipped, ignoring remaining ones. node1 # [ 2.243261] (udev-worker)[85]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. node1 # [ 2.245453] (udev-worker)[85]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 2.247144] systemd[1]: Finished Virtual Console Setup. node1 # [ 2.394999] uhci_hcd 0000:00:1d.1: UHCI Host Controller node1 # [ 2.395720] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 node1 # [ 2.405118] uhci_hcd 0000:00:1d.1: detected 2 ports node1 # [ 2.405953] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c1a0 node1 # [ 2.417913] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 2.419046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.279836] systemd[1]: Found device /dev/disk/by-label/nixos. node1 # [ 2.282808] systemd[1]: Reached target Initrd Root Device. node1 # [ 2.284227] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... node1 # [ 2.433383] usb usb3: Product: UHCI Host Controller node1 # [ 2.435786] usb usb3: Manufacturer: Linux 6.18.52 uhci_hcd node1 # [ 2.436522] usb usb3: SerialNumber: 0000:00:1d.1 node1 # [ 2.442032] hub 3-0:1.0: USB hub found node1 # [ 2.443969] hub 3-0:1.0: 2 ports detected node1 # [ 2.451231] uhci_hcd 0000:00:1d.2: UHCI Host Controller node1 # [ 2.453821] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 node1 # [ 2.455824] uhci_hcd 0000:00:1d.2: detected 2 ports node1 # [ 2.456662] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c1c0 node1 # [ 2.461061] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 node1 # [ 2.464027] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 node1 # [ 2.467983] usb usb4: Product: UHCI Host Controller node1 # [ 2.468722] usb usb4: Manufacturer: Linux 6.18.52 uhci_hcd node1 # [ 2.327809] systemd-fsck[105]: nixos: clean, 12/65536 files, 13019/262144 blocks node1 # [ 2.334704] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. node1 # [ 2.479955] usb usb4: SerialNumber: 0000:00:1d.2 node1 # [ 2.481384] hub 4-0:1.0: USB hub found node1 # [ 2.482928] hub 4-0:1.0: 2 ports detected node1 # [ 2.502540] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode node1 # [ 2.515825] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) node1 # [ 2.516694] ahci 0000:00:1f.2: flags: 64bit ncq only node1 # [ 2.518812] usb 1-1: new high-speed USB device number 2 using ehci-pci node1 # [ 2.525857] scsi host0: ahci node1 # [ 2.527648] scsi host1: ahci node1 # [ 2.529102] scsi host2: ahci node1 # [ 2.530860] scsi host3: ahci node1 # [ 2.532502] scsi host4: ahci node1 # [ 2.534169] scsi host5: ahci node1 # [ 2.534719] ata1: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc100 irq 47 lpm-pol 1 node1 # [ 2.536821] ata2: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc180 irq 47 lpm-pol 1 node1 # [ 2.538012] ata3: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc200 irq 47 lpm-pol 1 node1 # [ 2.539144] ata4: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc280 irq 47 lpm-pol 1 node1 # [ 2.540282] ata5: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc300 irq 47 lpm-pol 1 node1 # [ 2.541412] ata6: SATA max UDMA/133 abar m4096@0xfebdc000 port 0xfebdc380 irq 47 lpm-pol 1 node1 # [ 2.648999] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 node1 # [ 2.650147] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 node1 # [ 2.651559] usb 1-1: Product: QEMU USB Tablet node1 # [ 2.652273] usb 1-1: Manufacturer: QEMU node1 # [ 2.652998] usb 1-1: SerialNumber: 28754-0000:00:1d.7-1 node1 # [ 2.666850] hid: raw HID events driver (C) Jiri Kosina node1 # [ 2.630944] systemd[1]: Mounting /sysroot... node1 # [ 2.853223] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) node1 # [ 2.854246] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 node1 # [ 2.855264] ata3.00: applying bridge limits node1 # [ 2.856009] ata3.00: configured for UDMA/100 node1 # [ 2.856835] ata2: SATA link down (SStatus 0 SControl 300) node1 # [ 2.857796] ata5: SATA link down (SStatus 0 SControl 300) node1 # [ 2.858649] ata4: SATA link down (SStatus 0 SControl 300) node1 # [ 2.859476] ata6: SATA link down (SStatus 0 SControl 300) node1 # [ 2.860299] ata1: SATA link down (SStatus 0 SControl 300) node1 # [ 2.861290] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 node1 # [ 2.912446] usbcore: registered new interface driver usbhid node1 # [ 2.919200] usbhid: USB HID core driver node1 # [ 2.931254] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 node1 # [ 2.940066] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 node1 # [ 2.967989] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray node1 # [ 2.976459] EXT4-fs (vda): mounted filesystem 32c977aa-e8c2-4c1e-af3f-a51bc16721e4 r/w with ordered data mode. Quota mode: none. node1 # [ 2.978056] cdrom: Uniform CD-ROM driver Revision: 3.20 node1 # [ 2.837926] systemd[1]: Mounted /sysroot. node1 # [ 2.839303] systemd[1]: Reached target Initrd Root File System. node1 # [ 2.841509] systemd[1]: Starting Mountpoints Configured in the Real Root... node1 # [ 2.858093] systemd-sysroot-fstab-check[137]: /sysroot should be mounted in the initrd, will request daemon-reload. node1 # [ 2.863064] systemd[1]: Reload requested from client PID 137 ('systemd-sysroot') (unit initrd-parse-etc.service)... node1 # [ 2.864489] systemd[1]: Reloading... node1 # [ 2.943934] systemd[1]: Reloading finished in 81 ms. node1 # [ 2.951835] systemd-sysroot-fstab-check[137]: Requesting initrd-fs.target/start/replace... node1 # [ 2.956165] systemd-sysroot-fstab-check[137]: Requesting swap.target/start/replace... node1 # [ 2.959622] systemd[1]: initrd-parse-etc.service: Deactivated successfully. node1 # [ 2.963084] systemd[1]: Finished Mountpoints Configured in the Real Root. node1 # [ 2.964179] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. node1 # [ 3.634184] systemd[1]: Mounting /sysroot/nix/.ro-store... node1 # [ 3.640328] systemd[1]: Mounting /sysroot/nix/.rw-store... node1 # [ 3.647171] systemd[1]: Mounting /sysroot/run... node1 # [ 3.656192] systemd[1]: Mounting /sysroot/tmp/shared... node1 # [ 3.665760] systemd[1]: Mounting /sysroot/tmp/xchg... node1 # [ 3.704995] systemd[1]: Mounted /sysroot/nix/.ro-store. node1 # [ 3.711068] systemd[1]: Mounted /sysroot/nix/.rw-store. node1 # [ 3.711838] systemd[1]: Mounted /sysroot/run. node1 # [ 3.713932] systemd[1]: Mounted /sysroot/tmp/shared. node1 # [ 3.715568] systemd[1]: Mounted /sysroot/tmp/xchg. node1 # [ 3.720075] systemd[1]: Starting rw-sysroot-nix-store.service... node1 # [ 3.730261] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. node1 # [ 3.731741] systemd[1]: Finished rw-sysroot-nix-store.service. node1 # [ 4.633399] systemd[1]: Mounting /sysroot/nix/store... node1 # [ 4.682996] systemd[1]: Mounted /sysroot/nix/store. node1 # [ 4.684763] systemd[1]: Reached target Initrd File Systems. node1 # [ 4.686617] systemd[1]: Starting Find NixOS closure... node1 # [ 4.690219] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... node1 # [ 4.709080] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. node1 # [ 4.712644] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. node1 # [ 4.718623] systemd[1]: Finished Find NixOS closure. node1 # [ 4.720190] systemd[1]: Reached target Initrd Default Target. node1 # [ 4.721527] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... node1 # [ 4.734362] systemd[1]: Stopped target Initrd Default Target. node1 # [ 4.735282] systemd[1]: Stopped target Basic System. node1 # [ 4.736215] systemd[1]: Stopped target Initrd Root Device. node1 # [ 4.737133] systemd[1]: Stopped target Path Units. node1 # [ 4.739057] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. node1 # [ 4.740080] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. node1 # [ 4.741085] systemd[1]: Stopped target Slice Units. node1 # [ 4.741910] systemd[1]: Stopped target Socket Units. node1 # [ 4.742659] systemd[1]: Stopped target System Initialization. node1 # [ 4.743478] systemd[1]: Stopped target Swaps. node1 # [ 4.744164] systemd[1]: Stopped target Timer Units. node1 # [ 4.744836] systemd[1]: dbus.socket: Deactivated successfully. node1 # [ 4.746112] systemd[1]: Closed D-Bus System Message Bus Socket. node1 # [ 4.746969] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. node1 # [ 4.748470] systemd[1]: Stopped Find NixOS closure. node1 # [ 4.749737] systemd[1]: Starting rw-sysroot-nix-store.service... node1 # [ 4.750655] systemd[1]: systemd-sysctl.service: Deactivated successfully. node1 # [ 4.752317] systemd[1]: Stopped Apply Kernel Variables. node1 # [ 4.753331] systemd[1]: systemd-modules-load.service: Deactivated successfully. node1 # [ 4.754575] systemd[1]: Stopped Load Kernel Modules. node1 # [ 4.755582] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. node1 # [ 4.757220] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. node1 # [ 4.758480] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. node1 # [ 4.760620] systemd[1]: Stopped Create System Files and Directories. node1 # [ 4.761500] systemd[1]: Stopped target Local File Systems. node1 # [ 4.762605] systemd[1]: Stopped target Preparation for Local File Systems. node1 # [ 4.763646] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. node1 # [ 4.765433] systemd[1]: Stopped Coldplug All udev Devices. node1 # [ 4.766694] systemd[1]: Stopping Rule-based Manager for Device Events and Files... node1 # [ 4.767762] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 4.770217] systemd[1]: Stopped Virtual Console Setup. node1 # [ 4.778632] systemd[1]: initrd-cleanup.service: Deactivated successfully. node1 # [ 4.782168] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. node1 # [ 4.783168] systemd[1]: systemd-udevd.service: Deactivated successfully. node1 # [ 4.784187] systemd[1]: Stopped Rule-based Manager for Device Events and Files. node1 # [ 4.790150] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. node1 # [ 4.791204] systemd[1]: Closed udev Control Socket. node1 # [ 4.792839] systemd[1]: Starting Cleanup udev Database... node1 # [ 4.794557] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. node1 # [ 4.795637] systemd[1]: Stopped Create Static Device Nodes in /dev. node1 # [ 4.796555] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. node1 # [ 4.797608] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. node1 # [ 4.798583] systemd[1]: kmod-static-nodes.service: Deactivated successfully. node1 # [ 4.799598] systemd[1]: Stopped Create List of Static Device Nodes. node1 # [ 4.801200] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. node1 # [ 4.803128] systemd[1]: Finished rw-sysroot-nix-store.service. node1 # [ 4.818339] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. node1 # [ 4.820075] systemd[1]: Finished Cleanup udev Database. node1 # [ 4.820780] systemd[1]: Reached target Switch Root. node1 # [ 4.822356] systemd[1]: Starting NixOS Activation... node1 # [ 4.890825] initrd-nixos-activation-start[189]: booting system configuration /nix/store/wi1ykkdzbg5jfjh375n4gc38f6k65s9n-nixos-system-node1-test node1 # [ 4.916714] initrd-nixos-activation-start[189]: running activation script... node1 # [ 5.112886] initrd-nixos-activation-start[212]: setting up /etc... node1 # [ 5.204658] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. node1 # [ 5.206288] systemd[1]: Finished NixOS Activation. node1 # [ 5.208210] systemd[1]: Starting Switch Root... node1 # [ 5.219706] systemd[1]: Switching root. node1 # [ 5.490699] systemd-journald[66]: Received SIGTERM from PID 1 (systemd). node1 # [ 5.572234] NET: Registered PF_VSOCK protocol family node1 # [ 5.930321] systemd[1]: systemd 261.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) node1 # [ 5.939976] systemd[1]: Detected virtualization kvm. node1 # [ 5.941805] systemd[1]: Detected architecture x86-64. node1 # [ 5.943676] systemd[1]: Detected first boot. node1 # [ 5.947513] systemd[1]: Initializing machine ID from random generator. node1 # [ 6.183414] systemd[1]: bpf-restrict-fs: LSM BPF program attached node1 # [ 6.287432] systemd[1]: Applying preset policy. node1 # [ 6.456868] systemd[1]: Populated /etc with preset unit settings. node1 # [ 6.647491] systemd[1]: initrd-switch-root.service: Deactivated successfully. node1 # [ 6.648920] systemd[1]: Stopped initrd-switch-root.service. node1 # [ 6.651175] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. node1 # [ 6.653200] systemd[1]: Created slice Slice /system/getty. node1 # [ 6.654518] systemd[1]: Created slice User and Session Slice. node1 # [ 6.655504] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. node1 # [ 6.656715] systemd[1]: Started Forward Password Requests to Wall Directory Watch. node1 # [ 6.657853] systemd[1]: Expecting device /dev/hvc0... node1 # [ 6.658526] systemd[1]: Expecting device /dev/ttyS0... node1 # [ 6.659307] systemd[1]: Reached target Local Encrypted Volumes. node1 # [ 6.660180] systemd[1]: Stopped target initrd-fs.target. node1 # [ 6.660954] systemd[1]: Stopped target initrd-root-fs.target. node1 # [ 6.661733] systemd[1]: Stopped target initrd-switch-root.target. node1 # [ 6.662577] systemd[1]: Reached target Virtual Machines and Containers. node1 # [ 6.663460] systemd[1]: Reached target Path Units. node1 # [ 6.664149] systemd[1]: Reached target Remote File Systems. node1 # [ 6.664944] systemd[1]: Reached target Slice Units. node1 # [ 6.665657] systemd[1]: Reached target Swaps. node1 # [ 6.667438] systemd[1]: Listening on Query the User Interactively for a Password. node1 # [ 6.669834] systemd[1]: Listening on Process Core Dump Socket. node1 # [ 6.671691] systemd[1]: Listening on Credential Encryption/Decryption. node1 # [ 6.685177] systemd[1]: Listening on Factory Reset Management. node1 # [ 6.686130] systemd[1]: Listening on Hostname Service Socket. node1 # [ 6.689081] systemd[1]: Starting Journal Log Access Socket... node1 # [ 6.690303] systemd[1]: Listening on Journal Audit Socket. node1 # [ 6.693127] systemd[1]: Listening on Console Output Muting Service Socket. node1 # [ 6.694261] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. node1 # [ 6.695362] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 6.696647] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki node1 # [ 6.700621] systemd[1]: Listening on Disk Repartitioning Service Socket. node1 # [ 6.701617] systemd[1]: Listening on udev Control Socket. node1 # [ 6.702460] systemd[1]: Listening on udev Varlink Socket. node1 # [ 6.704848] systemd[1]: Mounting Huge Pages File System... node1 # [ 6.707006] systemd[1]: Mounting POSIX Message Queue File System... node1 # [ 6.714169] systemd[1]: Mounting Kernel Debug File System... node1 # [ 6.723393] systemd[1]: Mounting Kernel Trace File System... node1 # [ 6.729575] systemd[1]: Starting Create List of Static Device Nodes... node1 # [ 6.740841] systemd[1]: Starting Load Kernel Module configfs... node1 # [ 6.741700] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm node1 # [ 6.757183] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore node1 # [ 6.765040] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse node1 # [ 6.774707] systemd[1]: Mounting FUSE Control File System... node1 # [ 6.781479] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 node1 # [ 6.795210] systemd[1]: Starting Journal Service... node1 # [ 6.801934] systemd[1]: Starting Load Kernel Modules... node1 # [ 6.813129] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... node1 # [ 6.819205] systemd[1]: Starting Remount Root and Kernel File Systems... node1 # [ 6.823552] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 6.830848] systemd[1]: Starting Coldplug All udev Devices... node1 # [ 6.849813] systemd[1]: Listening on Journal Log Access Socket. node1 # [ 6.853718] systemd-journald[282]: Collecting audit messages is enabled. node1 # [ 6.854939] systemd[1]: Mounted Huge Pages File System. node1 # [ 6.860952] systemd[1]: Mounted POSIX Message Queue File System. node1 # [ 6.863971] systemd[1]: Mounted Kernel Debug File System. node1 # [ 6.868172] systemd[1]: Mounted Kernel Trace File System. node1 # [ 6.876918] systemd[1]: Finished Create List of Static Device Nodes. node1 # [ 6.882118] systemd[1]: modprobe@configfs.service: Deactivated successfully. node1 # [ 6.741504] systemd[1]: Queued start job for default target Multi-User System. node1 # [ 6.744585] systemd[1]: systemd-journald.service: Deactivated successfully. node1 # [ 6.888604] systemd[1]: Finished Load Kernel Module configfs. node1 # [ 6.894625] systemd[1]: Started Journal Service. node1 # [ 6.895423] loop: module loaded node1 # [ 6.758183] systemd-modules-load[283]: Inserted module 'loop' node1 # [ 6.761314] systemd[1]: Mounted FUSE Control File System. node1 # [ 6.923808] EXT4-fs (vda): re-mounted 32c977aa-e8c2-4c1e-af3f-a51bc16721e4. node1 # [ 6.783062] systemd[1]: Mounting Kernel Configuration File System... node1 # [ 6.784437] systemd-modules-load[283]: Inserted module 'tls' node1 # [ 6.790102] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... node1 # [ 6.797758] systemd[1]: Finished Load Kernel Modules. node1 # [ 6.805087] systemd[1]: Finished Remount Root and Kernel File Systems. node1 # [ 6.805971] systemd[1]: Listening on Disk Image Download Service Socket. node1 # [ 6.819172] systemd[1]: Starting Firewall... node1 # [ 6.824546] systemd[1]: Starting Flush Journal to Persistent Storage... node1 # [ 6.825517] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore node1 # [ 6.832490] systemd-oomd[285]: No swap; memory pressure usage will be degraded node1 # [ 6.838503] systemd[1]: Starting Load/Save OS Random Seed... node1 # [ 6.853100] systemd[1]: Starting Apply Kernel Variables... node1 # [ 6.853871] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 6.862905] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. node1 # [ 7.056970] systemd-journald[282]: Received client request to flush runtime journal. node1 # [ 7.013321] systemd[1]: Mounted Kernel Configuration File System. node1 # [ 7.014794] systemd[1]: Finished Load/Save OS Random Seed. node1 # [ 7.017821] systemd[1]: Reached target First Boot Complete. node1 # [ 7.019349] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. node1 # [ 7.021712] systemd[1]: Starting Create Static Device Nodes in /dev... node1 # [ 7.023329] systemd[1]: Finished Apply Kernel Variables. node1 # [ 7.025460] systemd[1]: Finished Flush Journal to Persistent Storage. node1 # [ 7.115917] systemd[1]: Finished Coldplug All udev Devices. node1 # [ 7.127085] systemd[1]: Finished Create Static Device Nodes in /dev. node1 # [ 7.129102] systemd[1]: Reached target Preparation for Local File Systems. node1 # [ 7.130828] systemd[1]: Starting Rule-based Manager for Device Events and Files... node1 # [ 7.174564] systemd-udevd[321]: Using default interface naming scheme 'v261'. node1 # [ 7.225242] systemd[1]: Started Rule-based Manager for Device Events and Files. node1 # [ 7.335098] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse node1 # [ 7.421892] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. node1 # [ 7.439158] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. node1 # [ 7.475199] (udev-worker)[350]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. node1 # [ 7.477342] (udev-worker)[350]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 7.479267] (udev-worker)[348]: Network interface NamePolicy= disabled on kernel command line. node1 # [ 7.507880] systemd[1]: Mounting /run/wrappers... node1 # [ 7.549827] systemd[1]: Mounted /run/wrappers. node1 # [ 7.550891] systemd[1]: Reached target Local File Systems. node1 # [ 7.554467] systemd[1]: Listening on Boot Loader Control Service Socket. node1 # [ 7.559498] systemd[1]: Starting register-nix-paths.service... node1 # [ 7.564091] systemd[1]: Starting Create SUID/SGID Wrappers... node1 # [ 7.564866] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. node1 # [ 7.568881] systemd[1]: Starting Save Transient machine-id to Disk... node1 # [ 7.589296] systemd[1]: Starting Create System Files and Directories... node1 # [ 7.659350] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. node1 # [ 7.664091] systemd[1]: Finished Save Transient machine-id to Disk. node1 # [ 7.688937] systemd[1]: Condition check resulted in Virtio network device being skipped. node1 # [ 7.691145] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore node1 # [ 7.692583] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. node1 # [ 7.695154] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 node1 # [ 7.697315] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore node1 # [ 7.698770] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.699978] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-os node1 # [ 7.742304] systemd[1]: Finished Create System Files and Directories. node1 # [ 7.750092] systemd[1]: Starting Rebuild Journal Catalog... node1 # [ 7.756071] systemd[1]: Starting Record System Boot/Shutdown in UTMP... node1 # [ 7.864845] systemd[1]: Finished Record System Boot/Shutdown in UTMP. node1 # [ 7.872650] systemd[1]: Finished Rebuild Journal Catalog. node1 # [ 7.881259] systemd[1]: Starting Update is Completed... node1 # [ 7.935946] systemd[1]: Finished Update is Completed. node1 # [ 8.086077] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 node1 # [ 8.110845] ACPI: button: Power Button [PWRF] node1 # [ 8.127368] bochs-drm 0000:00:01.0: vgaarb: deactivate vga console node1 # [ 8.168813] mousedev: PS/2 mouse device common for all mice node1 # [ 8.179320] rtc_cmos PNP0B00:00: RTC can wake from S4 node1 # [ 8.247550] systemd[1]: Finished Firewall. node1 # [ 8.240899] rtc_cmos PNP0B00:00: registered as rtc0 node1 # [ 8.240966] rtc_cmos PNP0B00:00: setting system clock to 2026-09-20T07:26:34 UTC (1789889194) node1 # [ 8.241051] rtc_cmos PNP0B00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs node1 # [ 8.316648] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. node1 # [ 8.319096] systemd[1]: Finished Create SUID/SGID Wrappers. node1 # [ 8.242173] systemd-journald[282]: Time jumped backwards, rotating. node1 # [ 8.270662] parport_pc 00:02: reported by Plug and Play ACPI node1 # [ 8.280370] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:06.0/virtio4/input/input4 node1 # [ 8.314682] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] node1 # [ 8.318878] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized node1 # [ 8.413461] Console: switching to colour dummy device 80x25 node1 # [ 8.354771] systemd[1]: Finished register-nix-paths.service. node1 # [ 8.356230] systemd[1]: Reached target System Initialization. node1 # [ 8.358307] systemd[1]: Started Discard unused filesystem blocks once a week. node1 # [ 8.359339] systemd[1]: Started Daily Cleanup of Temporary Directories. node1 # [ 8.361169] systemd[1]: Reached target Timer Units. node1 # [ 8.361959] systemd[1]: Listening on D-Bus System Message Bus Socket. node1 # [ 8.363175] systemd[1]: Listening on Nix Daemon Socket. node1 # [ 8.363885] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. node1 # [ 8.366921] systemd[1]: Reached target Socket Units. node1 # [ 8.368223] systemd[1]: Reached target Basic System. node1 # [ 8.370152] systemd[1]: Started backdoor.service. node1 # [ 8.372585] systemd[1]: Starting Import lastlog data into lastlog2 database... node1 # [ 8.383073] systemd[1]: Starting Name Service Cache Daemon (nsncd)... node1 # [ 8.473868] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt node1 # [ 8.473978] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD node1 # [ 8.396153] systemd[1]: Starting Post-Boot Actions... node1 # [ 8.402498] systemd[1]: Started Reset console on configuration changes. node1 # [ 8.415421] systemd[1]: Starting resolvconf update... node1 # [ 8.564950] [drm] Found bochs VGA, ID 0xb0c5. node1 # [ 8.564952] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. node1 # [ 8.567868] bochs-drm 0000:00:01.0: [drm] Registered 1 planes with drm panic node1 # [ 8.567876] [drm] Initialized bochs-drm 1.0.0 for 0000:00:01.0 on minor 0 node1 # [ 8.582234] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 node1 # [ 8.443302] systemd[1]: Starting D-Bus System Message Bus... node1 # [ 8.590898] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 node1 # [ 8.488070] systemd[1]: Started Name Service Cache Daemon (nsncd). node1 # [ 8.491838] nsncd[510]: Sep 20 07:26:34.892 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" node1 # [ 8.494190] systemd[1]: Reached target Host and Network Name Lookups. node1 # [ 8.495778] systemd[1]: Reached target User and Group Name Lookups. node1 # connecting to host... node1 # [ 8.515091] systemd[1]: Starting User Login Management... node1 # [ 8.522612] systemd[1]: Finished Post-Boot Actions. node1: Guest shell says: b'Spawning backdoor root shell...\n' node1: connected to guest root shell node1: (connecting took 9.24 seconds) node1: (finished: waiting for the VM to finish booting, in 9.24 seconds) node1 # [ 8.569056] systemd[1]: Finished Import lastlog data into lastlog2 database. node1 # [ 8.605203] systemd[1]: Starting Virtual Console Setup... node1 # [ 8.640363] dbus-broker-launch[516]: Looking up NSS user entry for 'systemd-timesync'... node1 # [ 8.661800] dbus-broker-launch[516]: NSS returned no entry for 'systemd-timesync' node1 # [ 8.662770] dbus-broker-launch[516]: Invalid user-name in /nix/store/mg6nymkw1b5hx502im6kyd5vvmzn3r59-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" node1 # [ 8.858390] Console: switching to colour frame buffer device 160x50 node1 # [ 8.896047] bochs-drm 0000:00:01.0: [drm] fb0: bochs-drmdrmfb frame buffer device node1 # [ 8.699727] systemd[1]: Started D-Bus System Message Bus. node1 # [ 8.756984] dbus-broker-launch[516]: Ready node1 # [ 8.760380] systemd[1]: Stopped target Host and Network Name Lookups. node1 # [ 8.763573] systemd[1]: Stopping Host and Network Name Lookups... node1 # [ 8.766413] systemd[1]: Stopped target User and Group Name Lookups. node1 # [ 8.768221] systemd[1]: Stopping User and Group Name Lookups... node1 # [ 8.769419] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... node1 # [ 8.770441] systemd[1]: nscd.service: Deactivated successfully. node1 # [ 8.771656] systemd[1]: Stopped Name Service Cache Daemon (nsncd). node1 # [ 8.773296] systemd-logind[532]: New seat seat0. node1 # [ 8.776512] systemd-logind[532]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) node1 # [ 8.777740] systemd[1]: Started User Login Management. node1 # [ 8.778456] systemd-logind[532]: Watching system buttons on /dev/input/event2 (Power Button) node1 # [ 8.787475] systemd[1]: Starting linger-users.service... node1 # [ 8.793578] systemd[1]: Starting Name Service Cache Daemon (nsncd)... node1 # [ 8.817626] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 8.826518] systemd[1]: Stopped Virtual Console Setup. node1 # [ 8.844467] systemd[1]: Starting Virtual Console Setup... node1 # [ 8.876276] systemd[1]: Finished resolvconf update. node1 # [ 8.879039] systemd[1]: linger-users.service: Deactivated successfully. node1 # [ 8.882648] systemd[1]: Finished linger-users.service. node1 # [ 8.886535] systemd[1]: Reached target Preparation for Network. node1 # [ 8.890934] nsncd[600]: Sep 20 07:26:35.291 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" node1 # [ 8.896204] systemd[1]: Starting DHCP Client... node1 # [ 8.902367] systemd[1]: Starting Address configuration of eth1... node1 # [ 8.913217] systemd[1]: Starting Extra networking commands.... node1 # [ 8.914050] systemd[1]: Started Name Service Cache Daemon (nsncd). node1 # [ 8.921809] systemd[1]: Reached target Host and Network Name Lookups. node1 # [ 8.922670] systemd[1]: Reached target User and Group Name Lookups. node1 # [ 9.070493] ppdev: user-space parallel port driver node1 # [ 8.989845] systemd-logind[532]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) node1 # [ 9.025838] network-addresses-eth1-start[625]: adding address 192.168.1.1/24... done node1 # [ 9.175401] iTCO_wdt iTCO_wdt.1.auto: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) node1 # [ 9.037844] network-addresses-eth1-start[625]: adding address 2001:db8:1::1/64... done node1 # [ 9.074778] systemd[1]: Finished Address configuration of eth1. node1 # [ 9.105717] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. node1 # [ 9.109252] systemd[1]: Stopped Virtual Console Setup. node1 # [ 9.252798] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) node1 # [ 9.123680] systemd[1]: Starting Virtual Console Setup... node1 # [ 9.160794] dhcpcd[637]: dhcpcd-10.3.2 starting node1 # [ 9.169846] dhcpcd[688]: dev: loaded udev node1 # [ 9.371945] 8021q: 802.1Q VLAN Support v1.8 node1 # [ 9.372389] 8021q: adding VLAN 0 to HW filter on device eth1 node1 # [ 9.234305] systemd[1]: Finished Extra networking commands.. node1 # [ 9.236559] systemd[1]: Reached target Network. node1 # [ 9.244109] systemd[1]: Starting Nginx Web Server... node1 # [ 9.249069] systemd[1]: Starting PostgreSQL Server... node1 # [ 9.257567] systemd[1]: Starting Permit User Sessions... node1 # [ 9.456332] kvm_amd: TSC scaling supported node1 # [ 9.456826] kvm_amd: Nested Virtualization enabled node1 # [ 9.457269] kvm_amd: Nested Paging enabled node1 # [ 9.457680] kvm_amd: LBR virtualization supported node1 # [ 9.468163] kvm_amd: Virtual VMLOAD VMSAVE supported node1 # [ 9.468673] kvm_amd: Virtual GIF supported node1 # [ 9.472939] kvm_amd: Virtual NMI enabled node1 # [ 9.342095] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. node1 # [ 9.366226] systemd[1]: Finished Permit User Sessions. node1 # [ 9.379274] systemd[1]: Started Getty on tty1. node1 # [ 9.383224] systemd[1]: Reached target Login Prompts. node1 # [ 9.586942] EDAC MC: Ver: 3.0.0 node1 # [ 9.590322] cfg80211: Loading compiled-in X.509 certificates for regulatory database node1 # [ 9.625722] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' node1 # [ 9.626424] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' node1 # [ 9.629988] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 node1 # [ 9.630864] cfg80211: failed to load regulatory.db node1 # [ 9.524431] nginx-pre-start[710]: nginx: the configuration file /nix/store/7jhzx3vxm6slmp6lpnx1cggnyrzpbs0c-nginx.conf syntax is ok node1 # [ 9.526469] nginx-pre-start[710]: nginx: configuration file /nix/store/7jhzx3vxm6slmp6lpnx1cggnyrzpbs0c-nginx.conf test is successful node1 # [ 9.535080] systemd[1]: Started Nginx Web Server. node1 # [ 9.706508] 8021q: adding VLAN 0 to HW filter on device eth0 node1 # [ 9.565543] dhcpcd[688]: eth0: waiting for carrier node1 # [ 9.566556] dhcpcd[688]: libudev: received NULL device node1 # [ 9.567852] dhcpcd[688]: libudev: received NULL device node1 # [ 9.568931] dhcpcd[688]: eth0: carrier acquired node1 # [ 9.580677] dhcpcd[688]: DUID 00:01:00:01:32:42:47:2b:52:54:00:12:34:56 node1 # [ 9.582261] dhcpcd[688]: eth0: IAID 00:12:34:56 node1 # [ 9.583429] postgresql-pre-start[713]: The files belonging to this database system will be owned by user "postgres". node1 # [ 9.585179] postgresql-pre-start[713]: This user must also own the server process. node1 # [ 9.586277] dhcpcd[688]: eth0: adding address fe80::5054:ff:fe12:3456 node1 # [ 9.600815] postgresql-pre-start[713]: The database cluster will be initialized with locale "en_US.UTF-8". node1 # [ 9.601996] postgresql-pre-start[713]: The default database encoding has accordingly been set to "UTF8". node1 # [ 9.603124] postgresql-pre-start[713]: The default text search configuration will be set to "english". node1 # [ 9.604218] postgresql-pre-start[713]: Data page checksums are enabled. node1 # [ 9.605103] postgresql-pre-start[713]: fixing permissions on existing directory /var/lib/postgresql/18 ... ok node1 # [ 9.606275] postgresql-pre-start[713]: creating subdirectories ... ok node1 # [ 9.607084] postgresql-pre-start[713]: selecting dynamic shared memory implementation ... posix node1 # [ 9.674983] postgresql-pre-start[713]: selecting default "max_connections" ... 100 node1 # [ 9.717745] systemd-vconsole-setup[673]: Configuration of first virtual console was skipped, ignoring remaining ones. node1 # [ 9.723080] systemd[1]: Finished Virtual Console Setup. node1 # [ 9.730144] postgresql-pre-start[713]: selecting default "shared_buffers" ... 128MB node1 # [ 9.811115] dhcpcd[688]: eth0: soliciting a DHCP lease node1 # [ 9.978925] NET: Registered PF_PACKET protocol family node1 # [ 9.843587] dhcpcd[688]: eth0: offered 10.0.2.15 from 10.0.2.2 node1 # [ 9.845169] dhcpcd[688]: eth0: probing address 10.0.2.15/24 node1 # [ 10.354914] postgresql-pre-start[713]: selecting default time zone ... UTC node1 # [ 10.357590] postgresql-pre-start[713]: creating configuration files ... ok node1 # [ 10.522860] postgresql-pre-start[713]: running bootstrap script ... ok node1 # [ 10.899415] postgresql-pre-start[713]: performing post-bootstrap initialization ... ok node1 # [ 11.049498] postgresql-pre-start[713]: syncing data to disk ... ok node1 # [ 11.051344] postgresql-pre-start[713]: initdb: warning: enabling "trust" authentication for local connections node1 # [ 11.052603] postgresql-pre-start[713]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. node1 # [ 11.054489] postgresql-pre-start[713]: Success. You can now start the database server using: node1 # [ 11.055574] postgresql-pre-start[713]: pg_ctl -D /var/lib/postgresql/18 -l logfile start node1 # [ 11.126553] postgres[763]: [763] LOG: starting PostgreSQL 18.6 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit node1 # [ 11.130585] postgres[763]: [763] LOG: listening on IPv6 address "::1", port 5432 node1 # [ 11.131667] postgres[763]: [763] LOG: listening on IPv4 address "127.0.0.1", port 5432 node1 # [ 11.134362] postgres[763]: [763] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" node1 # [ 11.145506] postgres[772]: [772] LOG: database system was shut down at 2026-09-20 07:26:37 GMT node1 # [ 11.151780] postgres[763]: [763] LOG: database system is ready to accept connections node1 # [ 11.157086] systemd[1]: Started PostgreSQL Server. node1 # [ 11.162888] systemd[1]: Starting PostgreSQL Setup Scripts... node1 # [ 11.285850] postgresql-setup-start[783]: CREATE DATABASE node1 # [ 11.312846] postgresql-setup-start[788]: CREATE ROLE node1 # [ 11.324761] postgresql-setup-start[790]: ALTER DATABASE node1 # [ 11.329270] systemd[1]: Finished PostgreSQL Setup Scripts. node1 # [ 11.330887] systemd[1]: Reached target PostgreSQL. node1 # [ 11.333513] systemd[1]: Starting Buildbot Continuous Integration Server.... node1 # [ 11.356866] buildbot-master-pre-start[795]: mkdir: created directory '/var/lib/buildbot/master' node1 # [ 11.481501] dhcpcd[688]: eth0: soliciting an IPv6 router node1 # [ 11.482360] dhcpcd[688]: eth0: Router Advertisement from fe80::2 node1 # [ 11.483211] dhcpcd[688]: eth0: adding address fec0::5054:ff:fe12:3456/64 node1 # [ 11.484412] dhcpcd[688]: eth0: adding route to fec0::/64 node1 # [ 11.485229] dhcpcd[688]: eth0: adding default route via fe80::2 node1 # [ 13.481396] buildbot-master-pre-start[797]: updating existing installation node1 # [ 13.483164] buildbot-master-pre-start[797]: not touching existing buildbot.tac node1 # [ 13.484090] buildbot-master-pre-start[797]: creating buildbot.tac.new instead node1 # [ 13.484946] buildbot-master-pre-start[797]: creating /var/lib/buildbot/master/master.cfg.sample node1 # [ 13.485997] buildbot-master-pre-start[797]: creating database (postgresql://@/buildbot) node1 # [ 13.487036] buildbot-master-pre-start[797]: buildmaster configured in /var/lib/buildbot/master node1 # [ 13.674758] systemd[1]: Started Buildbot Continuous Integration Server.. node1: (finished: waiting for unit buildbot-master, in 14.76 seconds) ??? Warning (UserWarning): wait_until_succeeds(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. File "/nix/store/r2r0lyypbamx7mzpb4853lcn9a540acv-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 node1: waiting for success: curl --fail -s --head localhost:8010 ??? Warning (UserWarning): execute(): passing a bare int/float as a duration is deprecated. Use datetime.timedelta instead. File "/nix/store/r2r0lyypbamx7mzpb4853lcn9a540acv-nixos-test-driver-1.1/lib/python3.14/site-packages/test_driver/duration.py", line 39 node1 # [ 14.954657] dhcpcd[688]: eth0: leased 10.0.2.15 for 86400 seconds node1 # [ 14.956375] dhcpcd[688]: eth0: adding route to 10.0.2.0/24 node1 # [ 14.957580] dhcpcd[688]: eth0: adding default route via 10.0.2.2 node1 # [ 15.021610] twistd[817]: 2026-09-20T07:26:40+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... node1 # [ 15.023617] twistd[817]: 2026-09-20T07:26:41+0000 [-] Loaded. node1 # [ 15.024634] twistd[817]: 2026-09-20T07:26:41+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 26.4.0 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14 3.14.7) starting up. node1 # [ 15.026927] twistd[817]: 2026-09-20T07:26:41+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. node1 # [ 15.028517] twistd[817]: 2026-09-20T07:26:41+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 node1 # [ 15.035781] twistd[817]: 2026-09-20T07:26:41+0000 [-] Loading configuration from '/nix/store/xlczy4q5s5fm6bcs110dg4akkak76fy8-master.cfg' node1 # [ 15.070302] systemd[1]: Started DHCP Client. node1 # [ 15.073890] systemd[1]: Reached target Multi-User System. node1 # [ 15.075210] systemd[1]: Startup finished in 866ms (kernel) + 4.541s (initrd) + 9.666s (userspace) = 15.074s. node1 # [ 15.447863] twistd[817]: 2026-09-20T07:26:41+0000 [buildbot_nix.github_projects#info] ~project-id-map~ is not present, GitHub project reload will follow. node1 # [ 15.453336] twistd[817]: 2026-09-20T07:26:41+0000 [-] Setting up database with URL 'postgresql://@/buildbot' node1 # [ 15.507814] twistd[817]: 2026-09-20T07:26:41+0000 [-] adding 2 new builders, removing 0 node1 # [ 15.532084] twistd[817]: 2026-09-20T07:26:41+0000 [-] adding 4 new services, removing 0 node1 # [ 15.636553] twistd[817]: 2026-09-20T07:26:42+0000 [-] adding 4 new schedulers, removing 0 node1 # [ 15.657745] twistd[817]: 2026-09-20T07:26:42+0000 [-] PeriodicWithStartup scheduler : missed scheduled build time - building immediately node1 # [ 15.705767] twistd[817]: 2026-09-20T07:26:42+0000 [-] added buildset 1 to database node1 # [ 15.711617] twistd[817]: 2026-09-20T07:26:42+0000 [-] BuildbotSite starting on 8010 node1 # [ 15.712639] twistd[817]: 2026-09-20T07:26:42+0000 [buildbot.www.service.BuildbotSite#info] Starting factory node1 # [ 15.714350] twistd[817]: 2026-09-20T07:26:42+0000 [-] adding 17 new workers, removing 0 node1 # [ 15.724029] twistd[817]: 2026-09-20T07:26:42+0000 [-] PBServerFactory starting on 9989 node1 # [ 15.725200] twistd[817]: 2026-09-20T07:26:42+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory node1 # [ 15.739179] twistd[817]: 2026-09-20T07:26:42+0000 [-] Starting Worker -- version: 2026.09.20 node1 # [ 15.740369] twistd[817]: 2026-09-20T07:26:42+0000 [-] recording hostname in twistd.hostname node1 # [ 15.741678] twistd[817]: 2026-09-20T07:26:42+0000 [-] message from master: attached node1 # [ 15.743320] twistd[817]: 2026-09-20T07:26:42+0000 [-] Got workerinfo from '__Janitor' node1 # [ 15.750054] twistd[817]: 2026-09-20T07:26:42+0000 [-] bot attached node1 # [ 15.750978] twistd[817]: 2026-09-20T07:26:42+0000 [-] Worker __Janitor attached to __Janitor node1 # [ 15.752165] twistd[817]: 2026-09-20T07:26:42+0000 [-] message from master: attached node1 # [ 15.895682] twistd[817]: 2026-09-20T07:26:42+0000 [-] BuildMaster is running node1: (finished: waiting for success: curl --fail -s --head localhost:8010, in 2.15 seconds) (finished: run the VM test script, in 17.13 seconds) test script finished in 17.16s cleanup kill QemuMachine (pid 46) node1 # qemu-system-x86_64: terminating on signal 15 from pid 39 (/nix/store/d64q19q1xjdwfhqx6czvrjgrhq0n3lcc-python3-3.14.7/bin/python3.14) node1 # [2026-09-20T07:26:43Z INFO virtiofsd] Client disconnected, shutting down node1 # [2026-09-20T07:26:43Z INFO virtiofsd] Client disconnected, shutting down node1 # [2026-09-20T07:26:43Z INFO virtiofsd] Client disconnected, shutting down (finished: cleanup, in 0.24 seconds) additionally exposed symbols: node1, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh