vm-test-run-scheduled-effects
checks.x86_64-linux.scheduled-effects
· build #68
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 12)12buildbot # Formatting '/build/vm-state-buildbot/tmp.YRzLqfcFMi', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 609ecef4-56a7-469e-b6d8-58d9e529ddec17buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/js39x2pvybmkblhb98hirf6qb9h6id7s-nixos-system-buildbot-test/init regInfo=/nix/store/p8mhy9lnrq86m1qyf0dnpmah5bjs347j-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved51buildbot # [ 0.000000] NX (Execute Disable) protection: active52buildbot # [ 0.000000] APIC: Static calls initialized53buildbot # [ 0.000000] SMBIOS 2.8 present.54buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201455buildbot # [ 0.000000] DMI: Memory slots populated: 1/156buildbot # [ 0.000000] Hypervisor detected: KVM57buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000058buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0059buildbot # [ 0.000001] kvm-clock: using sched offset of 511711522 cycles60buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns61buildbot # [ 0.000005] tsc: Detected 2400.012 MHz processor62buildbot # [ 0.000814] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000063buildbot # [ 0.000840] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs64buildbot # [ 0.000843] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT65buildbot # [ 0.002731] found SMP MP-table at [mem 0x000f5470-0x000f547f]66buildbot # [ 0.002743] Using GB pages for direct mapping67buildbot # [ 0.002824] RAMDISK: [mem 0x3e4ba000-0x3ffcffff]68buildbot # [ 0.002832] ACPI: Early table checksum verification disabled69buildbot # [ 0.002835] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )70buildbot # [ 0.002839] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)71buildbot # [ 0.002844] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)72buildbot # [ 0.002851] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002853] ACPI: FACS 0x000000003FFE0000 00004074buildbot # [ 0.002855] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002856] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)76buildbot # [ 0.002858] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002859] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3]78buildbot # [ 0.002860] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f]79buildbot # [ 0.002861] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]80buildbot # [ 0.002861] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b]81buildbot # [ 0.002862] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3]82buildbot # [ 0.002862] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb]83buildbot # [ 0.003095] No NUMA configuration found84buildbot # [ 0.003096] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff]85buildbot # [ 0.003098] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff]86buildbot # [ 0.005502] Zone ranges:87buildbot # [ 0.005503] DMA [mem 0x0000000000001000-0x0000000000ffffff]88buildbot # [ 0.005504] DMA32 [mem 0x0000000001000000-0x000000003ffdafff]89buildbot # [ 0.005506] Normal empty90buildbot # [ 0.005506] Device empty91buildbot # [ 0.005507] Movable zone start for each node92buildbot # [ 0.005508] Early memory node ranges93buildbot # [ 0.005508] node 0: [mem 0x0000000000001000-0x000000000009efff]94buildbot # [ 0.005509] node 0: [mem 0x0000000000100000-0x000000003ffdafff]95buildbot # [ 0.005510] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff]96buildbot # [ 0.005587] On node 0, zone DMA: 1 pages in unavailable ranges97buildbot # [ 0.005863] On node 0, zone DMA: 97 pages in unavailable ranges98buildbot # [ 0.024495] On node 0, zone DMA32: 37 pages in unavailable ranges99buildbot # [ 0.024902] ACPI: PM-Timer IO Port: 0x608100buildbot # [ 0.024912] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])101buildbot # [ 0.024939] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23102buildbot # [ 0.024942] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)103buildbot # [ 0.024943] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)104buildbot # [ 0.024944] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)105buildbot # [ 0.024945] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)106buildbot # [ 0.024946] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)107buildbot # [ 0.024948] ACPI: Using ACPI (MADT) for SMP configuration information108buildbot # [ 0.024950] ACPI: HPET id: 0x8086a201 base: 0xfed00000109buildbot # [ 0.024953] TSC deadline timer available110buildbot # [ 0.024957] CPU topo: Max. logical packages: 1111buildbot # [ 0.024958] CPU topo: Max. logical dies: 1112buildbot # [ 0.024958] CPU topo: Max. dies per package: 1113buildbot # [ 0.024961] CPU topo: Max. threads per core: 1114buildbot # [ 0.024962] CPU topo: Num. cores per package: 1115buildbot # [ 0.024962] CPU topo: Num. threads per package: 1116buildbot # [ 0.024963] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs117buildbot # [ 0.024981] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()118buildbot # [ 0.025009] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]119buildbot # [ 0.025010] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]120buildbot # [ 0.025011] [mem 0x40000000-0xfeffbfff] available for PCI devices121buildbot # [ 0.025013] Booting paravirtualized kernel on KVM122buildbot # [ 0.025015] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns123buildbot # [ 0.029458] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1124buildbot # [ 0.031716] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152125buildbot # [ 0.031757] kvm-guest: PV spinlocks disabled, single CPU126buildbot # [ 0.031759] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/js39x2pvybmkblhb98hirf6qb9h6id7s-nixos-system-buildbot-test/init regInfo=/nix/store/p8mhy9lnrq86m1qyf0dnpmah5bjs347j-closure-info/registration console=ttyS0,115200n8 console=tty0127buildbot # [ 0.031851] Unknown kernel command line parameters "regInfo=/nix/store/p8mhy9lnrq86m1qyf0dnpmah5bjs347j-closure-info/registration", will be passed to user space.128buildbot # [ 0.031863] random: crng init done129buildbot # [ 0.031864] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes130buildbot # [ 0.031884] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)131buildbot # [ 0.032447] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)132buildbot # [ 0.032477] Fallback order for Node 0: 0133buildbot # [ 0.032480] Built 1 zonelists, mobility grouping on. Total pages: 262009134buildbot # [ 0.032481] Policy zone: DMA32135buildbot # [ 0.034999] mem auto-init: stack:all(zero), heap alloc:on, heap free:off136buildbot # [ 0.037512] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1137buildbot # [ 0.039842] allocated 2097152 bytes of page_ext138buildbot # [ 0.049674] ftrace: allocating 48598 entries in 192 pages139buildbot # [ 0.049677] ftrace: allocated 192 pages with 2 groups140buildbot # [ 0.050545] Dynamic Preempt: lazy141buildbot # [ 0.050719] rcu: Preemptible hierarchical RCU implementation.142buildbot # [ 0.050720] rcu: RCU event tracing is enabled.143buildbot # [ 0.050721] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.144buildbot # [ 0.050722] Trampoline variant of Tasks RCU enabled.145buildbot # [ 0.050723] Rude variant of Tasks RCU enabled.146buildbot # [ 0.050723] Tracing variant of Tasks RCU enabled.147buildbot # [ 0.050724] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.148buildbot # [ 0.050724] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1149buildbot # [ 0.050746] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.150buildbot # [ 0.050748] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.151buildbot # [ 0.050748] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.152buildbot # [ 0.055140] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16153buildbot # [ 0.055429] rcu: srcu_init: Setting srcu_struct sizes based on contention.154buildbot # [ 0.055538] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)155buildbot # [ 0.059076] Console: colour VGA+ 80x25156buildbot # [ 0.059079] printk: legacy console [tty0] enabled157buildbot # [ 0.087340] printk: legacy console [ttyS0] enabled158buildbot # [ 0.181008] ACPI: Core revision 20250807159buildbot # [ 0.181869] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns160buildbot # [ 0.183391] APIC: Switch to symmetric I/O mode setup161buildbot # [ 0.184351] x2apic enabled162buildbot # [ 0.185083] APIC: Switched APIC routing to: physical x2apic163buildbot # [ 0.186871] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1164buildbot # [ 0.187847] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns165buildbot # [ 0.189488] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012)166buildbot # [ 0.190575] x86/cpu: User Mode Instruction Prevention (UMIP) activated167buildbot # [ 0.191616] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127168buildbot # [ 0.192485] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0169buildbot # [ 0.193490] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto170buildbot # [ 0.194485] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl171buildbot # [ 0.195486] Transient Scheduler Attacks: Vulnerable: No microcode172buildbot # [ 0.196485] Spectre V2 : Mitigation: Enhanced / Automatic IBRS173buildbot # [ 0.197485] Speculative Return Stack Overflow: Mitigation: Safe RET174buildbot # [ 0.198485] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization175buildbot # [ 0.199490] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier176buildbot # [ 0.201486] active return thunk: srso_alias_return_thunk177buildbot # [ 0.202506] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'178buildbot # [ 0.203485] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'179buildbot # [ 0.204485] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'180buildbot # [ 0.206216] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'181buildbot # [ 0.207222] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'182buildbot # [ 0.208211] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'183buildbot # [ 0.209254] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'184buildbot # [ 0.210402] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256185buildbot # [ 0.211485] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64186buildbot # [ 0.212407] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512187buildbot # [ 0.213200] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024188buildbot # [ 0.214192] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8189buildbot # [ 0.215192] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.190buildbot # [ 0.250323] Freeing SMP alternatives memory: 44K191buildbot # [ 0.251044] pid_max: default: 32768 minimum: 301192buildbot # [ 0.251592] LSM: initializing lsm=capability,landlock,yama,bpf,ima193buildbot # [ 0.252597] landlock: Up and running.194buildbot # [ 0.253486] Yama: becoming mindful.195buildbot # [ 0.254701] LSM support for eBPF active196buildbot # [ 0.255548] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)197buildbot # [ 0.256510] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)198buildbot # [ 0.259224] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)199buildbot # [ 0.260095] Performance Events: Fam17h+ core perfctr, AMD PMU driver.200buildbot # [ 0.260490] ... version: 2201buildbot # [ 0.261250] ... bit width: 48202buildbot # [ 0.261488] ... generic counters: 6203buildbot # [ 0.262207] ... generic bitmap: 000000000000003f204buildbot # [ 0.262539] ... fixed-purpose counters: 0205buildbot # [ 0.263217] ... fixed-purpose bitmap: 0000000000000000206buildbot # [ 0.263488] ... value mask: 0000ffffffffffff207buildbot # [ 0.264382] ... max period: 00007fffffffffff208buildbot # [ 0.265161] ... global_ctrl mask: 000000000000003f209buildbot # [ 0.265618] signal: max sigframe size: 3376210buildbot # [ 0.266422] rcu: Hierarchical SRCU implementation.211buildbot # [ 0.267074] rcu: Max phase no-delay instances is 400.212buildbot # [ 0.272044] smp: Bringing up secondary CPUs ...213buildbot # [ 0.272501] smp: Brought up 1 node, 1 CPU214buildbot # [ 0.273144] smpboot: Total of 1 processors activated (4800.02 BogoMIPS)215buildbot # [ 0.273712] Memory: 942400K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved)216buildbot # [ 0.274738] devtmpfs: initialized217buildbot # [ 0.275554] x86/mm: Memory block size: 128MB218buildbot # [ 0.277468] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns219buildbot # [ 0.278514] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)220buildbot # [ 0.279513] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).221buildbot # [ 0.280602] pinctrl core: initialized pinctrl subsystem222buildbot # [ 0.281690] PM: RTC time: 07:22:33, date: 2026-09-20223buildbot # [ 0.285284] NET: Registered PF_NETLINK/PF_ROUTE protocol family224buildbot # [ 0.286588] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations225buildbot # [ 0.287505] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations226buildbot # [ 0.288647] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations227buildbot # [ 0.289497] audit: initializing netlink subsys (disabled)228buildbot # [ 0.290490] audit: type=2000 audit(1789888954.531:1): state=initialized audit_enabled=0 res=1229buildbot # [ 0.291672] thermal_sys: Registered thermal governor 'fair_share'230buildbot # [ 0.291674] thermal_sys: Registered thermal governor 'bang_bang'231buildbot # [ 0.292489] thermal_sys: Registered thermal governor 'step_wise'232buildbot # [ 0.293422] thermal_sys: Registered thermal governor 'user_space'233buildbot # [ 0.294215] thermal_sys: Registered thermal governor 'power_allocator'234buildbot # [ 0.294501] cpuidle: using governor menu235buildbot # [ 0.296707] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5236buildbot # [ 0.297712] PCI: Using configuration type 1 for base access237buildbot # [ 0.298489] PCI: Using configuration type 1 for extended access238buildbot # [ 0.299605] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.239buildbot # [ 0.306518] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages240buildbot # [ 0.307490] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page241buildbot # [ 0.312489] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages242buildbot # [ 0.313489] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page243buildbot # [ 0.324740] ACPI: Added _OSI(Module Device)244buildbot # [ 0.325432] ACPI: Added _OSI(Processor Device)245buildbot # [ 0.326038] ACPI: Added _OSI(Processor Aggregator Device)246buildbot # [ 0.329243] ACPI: 1 ACPI AML tables successfully acquired and loaded247buildbot # [ 0.335258] ACPI: Interpreter enabled248buildbot # [ 0.335504] ACPI: PM: (supports S0 S3 S4 S5)249buildbot # [ 0.336217] ACPI: Using IOAPIC for interrupt routing250buildbot # [ 0.336520] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug251buildbot # [ 0.339488] PCI: Using E820 reservations for host bridge windows252buildbot # [ 0.340572] ACPI: Enabled 2 GPEs in block 00 to 0F253buildbot # [ 0.349410] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])254buildbot # [ 0.351191] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]255buildbot # [ 0.352795] acpiphp: Slot [3] registered256buildbot # [ 0.353472] acpiphp: Slot [4] registered257buildbot # [ 0.353963] acpiphp: Slot [5] registered258buildbot # [ 0.354508] acpiphp: Slot [6] registered259buildbot # [ 0.355167] acpiphp: Slot [7] registered260buildbot # [ 0.355518] acpiphp: Slot [8] registered261buildbot # [ 0.356216] acpiphp: Slot [9] registered262buildbot # [ 0.356508] acpiphp: Slot [10] registered263buildbot # [ 0.357202] acpiphp: Slot [11] registered264buildbot # [ 0.357522] acpiphp: Slot [12] registered265buildbot # [ 0.358226] acpiphp: Slot [13] registered266buildbot # [ 0.358507] acpiphp: Slot [14] registered267buildbot # [ 0.359206] acpiphp: Slot [15] registered268buildbot # [ 0.359518] acpiphp: Slot [16] registered269buildbot # [ 0.360179] acpiphp: Slot [17] registered270buildbot # [ 0.360507] acpiphp: Slot [18] registered271buildbot # [ 0.361219] acpiphp: Slot [19] registered272buildbot # [ 0.361508] acpiphp: Slot [20] registered273buildbot # [ 0.362184] acpiphp: Slot [21] registered274buildbot # [ 0.362507] acpiphp: Slot [22] registered275buildbot # [ 0.363228] acpiphp: Slot [23] registered276buildbot # [ 0.363507] acpiphp: Slot [24] registered277buildbot # [ 0.364225] acpiphp: Slot [25] registered278buildbot # [ 0.364516] acpiphp: Slot [26] registered279buildbot # [ 0.365189] acpiphp: Slot [27] registered280buildbot # [ 0.365509] acpiphp: Slot [28] registered281buildbot # [ 0.366208] acpiphp: Slot [29] registered282buildbot # [ 0.366507] acpiphp: Slot [30] registered283buildbot # [ 0.367184] acpiphp: Slot [31] registered284buildbot # [ 0.367499] PCI host bridge to bus 0000:00285buildbot # [ 0.368159] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]286buildbot # [ 0.368489] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]287buildbot # [ 0.369494] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]288buildbot # [ 0.370519] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]289buildbot # [ 0.371488] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]290buildbot # [ 0.372488] pci_bus 0000:00: root bus resource [bus 00-ff]291buildbot # [ 0.373510] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint292buildbot # [ 0.374932] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint293buildbot # [ 0.375952] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint294buildbot # [ 0.377517] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef]295buildbot # [ 0.378361] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk296buildbot # [ 0.379306] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk297buildbot # [ 0.380198] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk298buildbot # [ 0.380488] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk299buildbot # [ 0.381666] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint300buildbot # [ 0.383546] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f]301buildbot # [ 0.385297] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint302buildbot # [ 0.386762] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI303buildbot # [ 0.387494] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB304buildbot # [ 0.388702] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint305buildbot # [ 0.391563] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]306buildbot # [ 0.392503] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]307buildbot # [ 0.393467] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]308buildbot # [ 0.394407] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]309buildbot # [ 0.396283] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint310buildbot # [ 0.399526] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f]311buildbot # [ 0.400381] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]312buildbot # [ 0.401192] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]313buildbot # [ 0.401493] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]314buildbot # [ 0.403968] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint315buildbot # [ 0.406423] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f]316buildbot # [ 0.407137] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]317buildbot # [ 0.407510] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]318buildbot # [ 0.409752] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint319buildbot # [ 0.412295] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf]320buildbot # [ 0.413139] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]321buildbot # [ 0.413510] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]322buildbot # [ 0.415688] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint323buildbot # [ 0.418329] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f]324buildbot # [ 0.419139] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]325buildbot # [ 0.419510] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]326buildbot # [ 0.421703] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint327buildbot # [ 0.424556] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f]328buildbot # [ 0.426103] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]329buildbot # [ 0.427264] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]330buildbot # [ 0.429562] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint331buildbot # [ 0.432522] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f]332buildbot # [ 0.433372] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]333buildbot # [ 0.434277] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]334buildbot # [ 0.436595] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint335buildbot # [ 0.439495] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf]336buildbot # [ 0.441140] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]337buildbot # [ 0.441510] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]338buildbot # [ 0.442494] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref]339buildbot # [ 0.444671] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint340buildbot # [ 0.446515] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]341buildbot # [ 0.447465] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]342buildbot # [ 0.450048] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint343buildbot # [ 0.452530] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff]344buildbot # [ 0.453390] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]345buildbot # [ 0.454226] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]346buildbot # [ 0.455749] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint347buildbot # [ 0.458522] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df]348buildbot # [ 0.459391] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff]349buildbot # [ 0.460231] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]350buildbot # [ 0.464166] ACPI: PCI: Interrupt link LNKA configured for IRQ 10351buildbot # [ 0.464637] ACPI: PCI: Interrupt link LNKB configured for IRQ 10352buildbot # [ 0.465620] ACPI: PCI: Interrupt link LNKC configured for IRQ 11353buildbot # [ 0.466626] ACPI: PCI: Interrupt link LNKD configured for IRQ 11354buildbot # [ 0.467564] ACPI: PCI: Interrupt link LNKS configured for IRQ 9355buildbot # [ 0.469650] iommu: Default domain type: Translated356buildbot # [ 0.470497] iommu: DMA domain TLB invalidation policy: lazy mode357buildbot # [ 0.471757] ACPI: bus type USB registered358buildbot # [ 0.472539] usbcore: registered new interface driver usbfs359buildbot # [ 0.473531] usbcore: registered new interface driver hub360buildbot # [ 0.474457] usbcore: registered new device driver usb361buildbot # [ 0.476367] NetLabel: Initializing362buildbot # [ 0.476991] NetLabel: domain hash size = 128363buildbot # [ 0.477488] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO364buildbot # [ 0.478528] NetLabel: unlabeled traffic allowed by default365buildbot # [ 0.479481] PCI: Using ACPI for IRQ routing366buildbot # [ 0.480609] pci 0000:00:02.0: vgaarb: setting as boot VGA device367buildbot # [ 0.481484] pci 0000:00:02.0: vgaarb: bridge control possible368buildbot # [ 0.481484] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none369buildbot # [ 0.481490] vgaarb: loaded370buildbot # [ 0.482256] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0371buildbot # [ 0.482489] hpet0: 3 comparators, 64-bit 100.000000 MHz counter372buildbot # [ 0.486596] clocksource: Switched to clocksource kvm-clock373buildbot # [ 0.489984] VFS: Disk quotas dquot_6.6.0374buildbot # [ 0.490712] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)375buildbot # [ 0.492120] pnp: PnP ACPI init376buildbot # [ 0.493333] pnp: PnP ACPI: found 6 devices377buildbot # [ 0.500955] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns378buildbot # [ 0.502451] clocksource: Switched to clocksource acpi_pm379buildbot # [ 0.503511] NET: Registered PF_INET protocol family380buildbot # [ 0.504603] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)381buildbot # [ 0.522416] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)382buildbot # [ 0.523965] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)383buildbot # [ 0.525362] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)384buildbot # [ 0.526735] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)385buildbot # [ 0.528037] TCP: Hash tables configured (established 8192 bind 8192)386buildbot # [ 0.529242] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)387buildbot # [ 0.530502] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)388buildbot # [ 0.531673] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)389buildbot # [ 0.532981] NET: Registered PF_UNIX/PF_LOCAL protocol family390buildbot # [ 0.533957] NET: Registered PF_XDP protocol family391buildbot # [ 0.534830] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]392buildbot # [ 0.535891] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]393buildbot # [ 0.536909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]394buildbot # [ 0.538035] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]395buildbot # [ 0.539226] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]396buildbot # [ 0.540479] pci 0000:00:01.0: PIIX3: Enabling Passive Release397buildbot # [ 0.541503] pci 0000:00:00.0: Limiting direct PCI/PCI transfers398buildbot # [ 0.544108] ACPI: \_SB_.LNKD: Enabled at IRQ 11399buildbot # [ 0.547334] PCI: CLS 0 bytes, default 64400buildbot # [ 0.548220] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns401buildbot # [ 0.550000] Trying to unpack rootfs image as initramfs...402buildbot # [ 0.594482] Initialise system trusted keyrings403buildbot # [ 0.597121] workingset: timestamp_bits=40 max_order=18 bucket_order=0404buildbot # [ 0.620118] Key type asymmetric registered405buildbot # [ 0.620853] Asymmetric key parser 'x509' registered406buildbot # [ 0.621769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)407buildbot # [ 0.625180] io scheduler mq-deadline registered408buildbot # [ 0.625954] io scheduler kyber registered409buildbot # [ 0.629652] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled410buildbot # [ 0.630987] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A411buildbot # [ 0.636141] Linux agpgart interface v0.103412buildbot # [ 0.636910] ACPI: bus type drm_connector registered413buildbot # [ 0.639211] usbcore: registered new interface driver usbserial_generic414buildbot # [ 0.640342] usbserial: USB Serial support registered for generic415buildbot # [ 0.644083] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.416buildbot # [ 0.644083] Please enable it if your BIOS has the CPPC option.417buildbot # [ 0.646392] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled418buildbot # [ 0.650203] drop_monitor: Initializing network drop monitor service419buildbot # [ 0.651382] NET: Registered PF_INET6 protocol family420buildbot # [ 0.654512] Segment Routing with IPv6421buildbot # [ 0.657095] In-situ OAM (IOAM) with IPv6422buildbot # [ 0.658179] IPI shorthand broadcast: enabled423buildbot # [ 0.666554] sched_clock: Marking stable (536018087, 130048730)->(738382448, -72315631)424buildbot # [ 0.671169] registered taskstats version 1425buildbot # [ 0.672179] Loading compiled-in X.509 certificates426buildbot # [ 0.690103] Demotion targets for Node 0: null427buildbot # [ 0.692128] Key type .fscrypt registered428buildbot # [ 0.692822] Key type fscrypt-provisioning registered429buildbot # [ 0.693826] ima: No TPM chip found, activating TPM-bypass!430buildbot # [ 0.698087] ima: Allocated hash algorithm: sha1431buildbot # [ 0.698900] ima: No architecture policies found432buildbot # [ 0.701076] PM: Magic number: 10:86:370433buildbot # [ 0.702716] RAS: Correctable Errors collector initialized.434buildbot # [ 0.712775] clk: Disabling unused clocks435buildbot # [ 0.715079] PM: genpd: Disabling unused power domains436buildbot # [ 0.868535] Freeing initrd memory: 27736K437buildbot # [ 0.871837] Freeing unused decrypted memory: 2028K438buildbot # [ 0.874547] Freeing unused kernel image (initmem) memory: 3636K439buildbot # [ 0.875682] Write protecting the kernel read-only data: 32768k440buildbot # [ 0.877751] Freeing unused kernel image (text/rodata gap) memory: 1272K441buildbot # [ 0.879371] Freeing unused kernel image (rodata/data gap) memory: 776K442buildbot # [ 0.930561] x86/mm: Checked W+X mappings: passed, no W+X pages found.443buildbot # [ 0.931694] Run /init as init process444buildbot # [ 0.942308] systemd[1]: Inserted module 'autofs4'445buildbot # [ 0.957981] fuse: init (API version 7.45)446buildbot # [ 0.964566] ACPI: \_SB_.LNKC: Enabled at IRQ 10447buildbot # [ 0.971469] ACPI: \_SB_.LNKA: Enabled at IRQ 10448buildbot # [ 0.974708] ACPI: \_SB_.LNKB: Enabled at IRQ 11449buildbot # [ 1.007165] systemd[1]: Successfully made /usr/ read-only.450buildbot # [ 1.342918] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)451buildbot # [ 1.347682] systemd[1]: Detected virtualization kvm.452buildbot # [ 1.348527] systemd[1]: Detected architecture x86-64.453buildbot # [ 1.349368] systemd[1]: Running in initrd.454buildbot # [ 1.350519] systemd[1]: Initializing machine ID from random generator.455buildbot # [ 1.351674] systemd[1]: Hostname set to <buildbot>.456buildbot # [ 1.398892] systemd[1]: Queued start job for default target Initrd Default Target.457buildbot # [ 1.403353] systemd[1]: Created slice Slice /system/modprobe.458buildbot # [ 1.404492] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.459buildbot # [ 1.405947] systemd[1]: Expecting device /dev/disk/by-label/nixos...460buildbot # [ 1.407009] systemd[1]: Reached target Path Units.461buildbot # [ 1.407870] systemd[1]: Reached target Slice Units.462buildbot # [ 1.408737] systemd[1]: Reached target Swaps.463buildbot # [ 1.409539] systemd[1]: Reached target Timer Units.464buildbot # [ 1.410508] systemd[1]: Listening on D-Bus System Message Bus Socket.465buildbot # [ 1.411697] systemd[1]: Listening on Journal Socket (/dev/log).466buildbot # [ 1.412835] systemd[1]: Listening on Journal Sockets.467buildbot # [ 1.413824] systemd[1]: Listening on udev Control Socket.468buildbot # [ 1.414822] systemd[1]: Listening on udev Kernel Socket.469buildbot # [ 1.415731] systemd[1]: Reached target Socket Units.470buildbot # [ 1.417577] systemd[1]: Starting Create List of Static Device Nodes...471buildbot # [ 1.421137] systemd[1]: Starting Load Kernel Module 9pnet_virtio...472buildbot # [ 1.427138] systemd[1]: Starting Load Kernel Module configfs...473buildbot # [ 1.440183] systemd[1]: Starting Journal Service...474buildbot # [ 1.454145] systemd[1]: Starting Load Kernel Modules...475buildbot # [ 1.455038] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki476buildbot # [ 1.473312] systemd[1]: Starting Coldplug All udev Devices...477buildbot # [ 1.475166] netfs: FS-Cache loaded478buildbot # [ 1.487728] systemd[1]: Finished Create List of Static Device Nodes.479buildbot # [ 1.494552] systemd[1]: modprobe@configfs.service: Deactivated successfully.480buildbot # [ 1.497391] 9pnet: Installing 9P2000 support481buildbot # [ 1.504700] systemd[1]: Finished Load Kernel Module configfs.482buildbot # [ 1.511484] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config483buildbot # [ 1.524950] systemd-journald[67]: Collecting audit messages is disabled.484buildbot # [ 1.533012] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.485buildbot # [ 1.544107] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev486buildbot # [ 1.569299] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...487buildbot # [ 1.579482] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.488buildbot # [ 1.589145] systemd[1]: Finished Load Kernel Module 9pnet_virtio.489buildbot # [ 1.595139] systemd[1]: Finished Load Kernel Modules.490buildbot # [ 1.604492] systemd[1]: Starting Apply Kernel Variables...491buildbot # [ 1.619571] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.492buildbot # [ 1.627302] systemd[1]: Starting Create Static Device Nodes in /dev...493buildbot # [ 1.500242] systemd-modules-load[68]: Inserted module 'dm_mod'494buildbot # [ 1.501479] systemd-modules-load[68]: Inserted module 'virtio_balloon'495buildbot # [ 1.505306] systemd-modules-load[68]: Inserted module 'virtio_gpu'496buildbot # [ 1.640412] systemd[1]: Started Journal Service.497buildbot # [ 1.520262] systemd[1]: Finished Apply Kernel Variables.498buildbot # [ 1.535145] systemd[1]: Finished Create Static Device Nodes in /dev.499buildbot # [ 1.536592] systemd[1]: Reached target Preparation for Local File Systems.500buildbot # [ 1.539760] systemd[1]: Reached target Local File Systems.501buildbot # [ 1.543079] systemd[1]: Starting Create System Files and Directories...502buildbot # [ 1.548353] systemd[1]: Starting Rule-based Manager for Device Events and Files...503buildbot # [ 1.572255] systemd[1]: Finished Create System Files and Directories.504buildbot # [ 1.597263] systemd-udevd[83]: Using default interface naming scheme 'v260'.505buildbot # [ 1.623356] systemd[1]: Started Rule-based Manager for Device Events and Files.506buildbot # [ 1.684150] systemd[1]: Finished Coldplug All udev Devices.507buildbot # [ 1.684994] systemd[1]: Reached target System Initialization.508buildbot # [ 1.685775] systemd[1]: Reached target Basic System.509buildbot # [ 1.991683] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12510buildbot # [ 2.011552] serio: i8042 KBD port at 0x60,0x64 irq 1511buildbot # [ 2.024139] serio: i8042 AUX port at 0x60,0x64 irq 12512buildbot # [ 2.029187] virtio_blk virtio5: 1/0/0 default/read/poll queues513buildbot # [ 2.050497] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)514buildbot # [ 2.065893] uhci_hcd 0000:00:01.2: UHCI Host Controller515buildbot # [ 2.081685] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1516buildbot # [ 2.085083] uhci_hcd 0000:00:01.2: detected 2 ports517buildbot # [ 2.085822] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100518buildbot # [ 2.098682] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18519buildbot # [ 2.099817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1520buildbot # [ 2.111560] usb usb1: Product: UHCI Host Controller521buildbot # [ 2.113687] SCSI subsystem initialized522buildbot # [ 1.990265] (udev-worker)[90]: Network interface NamePolicy= disabled on kernel command line.523buildbot # [ 2.124152] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd524buildbot # [ 2.124947] usb usb1: SerialNumber: 0000:00:01.2525buildbot # [ 2.128815] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0526buildbot # [ 2.004852] systemd[1]: Starting Virtual Console Setup...527buildbot # [ 2.006443] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.528buildbot # [ 2.008502] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.529buildbot # [ 2.147280] hub 1-0:1.0: USB hub found530buildbot # [ 2.150819] hub 1-0:1.0: 2 ports detected531buildbot # [ 2.046798] systemd-vconsole-setup[100]: Configuration of first virtual console was skipped, ignoring remaining ones.532buildbot # [ 2.049686] systemd[1]: Finished Virtual Console Setup.533buildbot # [ 2.061145] systemd[1]: Found device /dev/disk/by-label/nixos.534buildbot # [ 2.063792] systemd[1]: Reached target Initrd Root Device.535buildbot # [ 2.064814] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...536buildbot # [ 2.103658] systemd-fsck[107]: nixos: clean, 12/65536 files, 13019/262144 blocks537buildbot # [ 2.235581] scsi host0: ata_piix538buildbot # [ 2.240257] scsi host1: ata_piix539buildbot # [ 2.240828] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0540buildbot # [ 2.112828] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.541buildbot # [ 2.245171] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0542buildbot # [ 2.386221] usb 1-1: new full-speed USB device number 2 using uhci_hcd543buildbot # [ 2.402229] ata2: found unknown device (class 0)544buildbot # [ 2.403446] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100545buildbot # [ 2.406157] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5546buildbot # [ 2.432485] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray547buildbot # [ 2.441291] cdrom: Uniform CD-ROM driver Revision: 3.20548buildbot # [ 2.353905] systemd[1]: Mounting /sysroot...549buildbot # [ 2.554085] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00550buildbot # [ 2.555242] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10551buildbot # [ 2.556588] usb 1-1: Product: QEMU USB Tablet552buildbot # [ 2.557309] usb 1-1: Manufacturer: QEMU553buildbot # [ 2.557842] usb 1-1: SerialNumber: 28754-0000:00:01.2-1554buildbot # [ 2.586424] hid: raw HID events driver (C) Jiri Kosina555buildbot # [ 2.598297] usbcore: registered new interface driver usbhid556buildbot # [ 2.600236] usbhid: USB HID core driver557buildbot # [ 2.605808] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2558buildbot # [ 2.607617] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0559buildbot # [ 2.611541] EXT4-fs (vda): mounted filesystem 609ecef4-56a7-469e-b6d8-58d9e529ddec r/w with ordered data mode. Quota mode: none.560buildbot # [ 2.485884] systemd[1]: Mounted /sysroot.561buildbot # [ 2.489036] systemd[1]: Reached target Initrd Root File System.562buildbot # [ 2.492895] systemd[1]: Mounting /sysroot/nix/.ro-store...563buildbot # [ 2.498081] systemd[1]: Mounting /sysroot/nix/.rw-store...564buildbot # [ 2.506323] systemd[1]: Mounting /sysroot/run...565buildbot # [ 2.515287] systemd[1]: Mounting /sysroot/tmp/shared...566buildbot # [ 2.520209] systemd[1]: Mounting /sysroot/tmp/xchg...567buildbot # [ 2.530533] systemd[1]: Starting Mountpoints Configured in the Real Root...568buildbot # [ 2.673424] 9p: Installing v9fs 9p2000 file system support569buildbot # [ 2.553383] systemd[1]: Mounted /sysroot/nix/.ro-store.570buildbot # [ 2.559567] systemd[1]: Mounted /sysroot/nix/.rw-store.571buildbot # [ 2.565086] systemd[1]: Mounted /sysroot/run.572buildbot # [ 2.565724] systemd[1]: Mounted /sysroot/tmp/shared.573buildbot # [ 2.566524] systemd[1]: Mounted /sysroot/tmp/xchg.574buildbot # [ 2.569748] systemd-sysroot-fstab-check[131]: /sysroot should be mounted in the initrd, will request daemon-reload.575buildbot # [ 2.574873] systemd[1]: Starting rw-sysroot-nix-store.service...576buildbot # [ 2.576343] systemd[1]: Reload requested from client PID 131 ('systemd-sysroot') (unit initrd-parse-etc.service)...577buildbot # [ 2.579035] systemd[1]: Reloading...578buildbot # [ 2.653182] systemd[1]: Reloading finished in 75 ms.579buildbot # [ 2.660322] systemd-sysroot-fstab-check[131]: Requesting initrd-fs.target/start/replace...580buildbot # [ 2.662778] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.581buildbot # [ 2.663899] systemd[1]: Finished rw-sysroot-nix-store.service.582buildbot # [ 2.665972] systemd-sysroot-fstab-check[131]: Requesting swap.target/start/replace...583buildbot # [ 2.668927] systemd[1]: initrd-parse-etc.service: Deactivated successfully.584buildbot # [ 2.670335] systemd[1]: Finished Mountpoints Configured in the Real Root.585buildbot # [ 2.671417] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.586buildbot # [ 2.674843] systemd[1]: Starting rw-sysroot-nix-store.service...587buildbot # [ 2.685725] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.588buildbot # [ 2.687399] systemd[1]: Finished rw-sysroot-nix-store.service.589buildbot # [ 3.355983] systemd[1]: Mounting /sysroot/nix/store...590buildbot # [ 3.401970] systemd[1]: Mounted /sysroot/nix/store.591buildbot # [ 3.405138] systemd[1]: Reached target Initrd File Systems.592buildbot # [ 3.409153] systemd[1]: Starting Find NixOS closure...593buildbot # [ 3.413242] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...594buildbot # [ 3.439368] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.595buildbot # [ 3.443088] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.596buildbot # [ 3.449562] systemd[1]: Finished Find NixOS closure.597buildbot # [ 3.450687] systemd[1]: Reached target Initrd Default Target.598buildbot # [ 3.452451] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...599buildbot # [ 3.466331] systemd[1]: Stopped target Initrd Default Target.600buildbot # [ 3.467384] systemd[1]: Stopped target Basic System.601buildbot # [ 3.468291] systemd[1]: Stopped target Initrd Root Device.602buildbot # [ 3.470051] systemd[1]: Stopped target Path Units.603buildbot # [ 3.470745] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.604buildbot # [ 3.471781] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.605buildbot # [ 3.472802] systemd[1]: Stopped target Slice Units.606buildbot # [ 3.473524] systemd[1]: Stopped target Socket Units.607buildbot # [ 3.474403] systemd[1]: Stopped target System Initialization.608buildbot # [ 3.475280] systemd[1]: Stopped target Swaps.609buildbot # [ 3.476147] systemd[1]: Stopped target Timer Units.610buildbot # [ 3.477295] systemd[1]: dbus.socket: Deactivated successfully.611buildbot # [ 3.478316] systemd[1]: Closed D-Bus System Message Bus Socket.612buildbot # [ 3.479375] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.613buildbot # [ 3.480697] systemd[1]: Stopped Find NixOS closure.614buildbot # [ 3.482135] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio615buildbot # [ 3.484026] systemd[1]: Starting rw-sysroot-nix-store.service...616buildbot # [ 3.485089] systemd[1]: systemd-sysctl.service: Deactivated successfully.617buildbot # [ 3.486381] systemd[1]: Stopped Apply Kernel Variables.618buildbot # [ 3.488264] systemd[1]: systemd-modules-load.service: Deactivated successfully.619buildbot # [ 3.489483] systemd[1]: Stopped Load Kernel Modules.620buildbot # [ 3.490518] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.621buildbot # [ 3.492126] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.622buildbot # [ 3.493277] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.623buildbot # [ 3.494256] systemd[1]: Stopped Create System Files and Directories.624buildbot # [ 3.496103] systemd[1]: Stopped target Local File Systems.625buildbot # [ 3.496848] systemd[1]: Stopped target Preparation for Local File Systems.626buildbot # [ 3.497761] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.627buildbot # [ 3.498865] systemd[1]: Stopped Coldplug All udev Devices.628buildbot # [ 3.502068] systemd[1]: Stopping Rule-based Manager for Device Events and Files...629buildbot # [ 3.503092] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.630buildbot # [ 3.504074] systemd[1]: Stopped Virtual Console Setup.631buildbot # [ 3.515163] systemd[1]: initrd-cleanup.service: Deactivated successfully.632buildbot # [ 3.517141] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.633buildbot # [ 3.518554] systemd[1]: systemd-udevd.service: Deactivated successfully.634buildbot # [ 3.522096] systemd[1]: Stopped Rule-based Manager for Device Events and Files.635buildbot # [ 3.525990] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.636buildbot # [ 3.527133] systemd[1]: Finished rw-sysroot-nix-store.service.637buildbot # [ 3.528589] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.638buildbot # [ 3.529893] systemd[1]: Closed udev Control Socket.639buildbot # [ 3.532085] systemd[1]: Starting Cleanup udev Database...640buildbot # [ 3.532841] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.641buildbot # [ 3.533866] systemd[1]: Stopped Create Static Device Nodes in /dev.642buildbot # [ 3.534777] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.643buildbot # [ 3.536134] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.644buildbot # [ 3.538144] systemd[1]: kmod-static-nodes.service: Deactivated successfully.645buildbot # [ 3.539066] systemd[1]: Stopped Create List of Static Device Nodes.646buildbot # [ 3.552836] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.647buildbot # [ 3.554533] systemd[1]: Finished Cleanup udev Database.648buildbot # [ 3.555848] systemd[1]: Reached target Switch Root.649buildbot # [ 3.557690] systemd[1]: Starting NixOS Activation...650buildbot # [ 3.720363] initrd-nixos-activation-start[177]: booting system configuration /nix/store/js39x2pvybmkblhb98hirf6qb9h6id7s-nixos-system-buildbot-test651buildbot # [ 3.783273] initrd-nixos-activation-start[177]: running activation script...652buildbot # [ 4.163706] initrd-nixos-activation-start[200]: setting up /etc...653buildbot # [ 4.424767] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.654buildbot # [ 4.427058] systemd[1]: Finished NixOS Activation.655buildbot # [ 4.428222] systemd[1]: Starting Switch Root...656buildbot # [ 4.441695] systemd[1]: Switching root.657buildbot # [ 4.587231] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).658buildbot # [ 4.753140] NET: Registered PF_VSOCK protocol family659buildbot # [ 5.138081] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)660buildbot # [ 5.141967] systemd[1]: Detected virtualization kvm.661buildbot # [ 5.142656] systemd[1]: Detected architecture x86-64.662buildbot # [ 5.143450] systemd[1]: Detected first boot.663buildbot # [ 5.148396] systemd[1]: Initializing machine ID from random generator.664buildbot # [ 5.372905] systemd[1]: bpf-restrict-fs: LSM BPF program attached665buildbot # [ 5.476477] systemd[1]: Applying preset policy.666buildbot # [ 5.876509] systemd[1]: Populated /etc with preset unit settings.667buildbot # [ 6.328156] systemd[1]: initrd-switch-root.service: Deactivated successfully.668buildbot # [ 6.329511] systemd[1]: Stopped initrd-switch-root.service.669buildbot # [ 6.332563] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.670buildbot # [ 6.334591] systemd[1]: Created slice Slice /system/getty.671buildbot # [ 6.335926] systemd[1]: Created slice User and Session Slice.672buildbot # [ 6.336857] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.673buildbot # [ 6.338107] systemd[1]: Started Forward Password Requests to Wall Directory Watch.674buildbot # [ 6.339217] systemd[1]: Expecting device /dev/hvc0...675buildbot # [ 6.339909] systemd[1]: Expecting device /dev/ttyS0...676buildbot # [ 6.340672] systemd[1]: Reached target Local Encrypted Volumes.677buildbot # [ 6.341506] systemd[1]: Stopped target initrd-fs.target.678buildbot # [ 6.342285] systemd[1]: Stopped target initrd-root-fs.target.679buildbot # [ 6.343086] systemd[1]: Stopped target initrd-switch-root.target.680buildbot # [ 6.343905] systemd[1]: Reached target Virtual Machines and Containers.681buildbot # [ 6.344802] systemd[1]: Reached target Path Units.682buildbot # [ 6.345522] systemd[1]: Reached target Remote File Systems.683buildbot # [ 6.346343] systemd[1]: Reached target Slice Units.684buildbot # [ 6.347067] systemd[1]: Reached target Swaps.685buildbot # [ 6.350221] systemd[1]: Listening on Query the User Interactively for a Password.686buildbot # [ 6.354467] systemd[1]: Listening on Process Core Dump Socket.687buildbot # [ 6.357552] systemd[1]: Listening on Credential Encryption/Decryption.688buildbot # [ 6.360928] systemd[1]: Listening on Factory Reset Management.689buildbot # [ 6.365010] systemd[1]: Starting Journal Log Access Socket...690buildbot # [ 6.366585] systemd[1]: Listening on Journal Audit Socket.691buildbot # [ 6.369592] systemd[1]: Listening on Console Output Muting Service Socket.692buildbot # [ 6.370861] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.693buildbot # [ 6.372315] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki694buildbot # [ 6.373627] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki695buildbot # [ 6.383615] systemd[1]: Listening on Disk Repartitioning Service Socket.696buildbot # [ 6.384657] systemd[1]: Listening on udev Control Socket.697buildbot # [ 6.385551] systemd[1]: Listening on udev Varlink Socket.698buildbot # [ 6.390716] systemd[1]: Mounting Huge Pages File System...699buildbot # [ 6.393949] systemd[1]: Mounting POSIX Message Queue File System...700buildbot # [ 6.398132] systemd[1]: Mounting Kernel Debug File System...701buildbot # [ 6.405609] systemd[1]: Mounting Kernel Trace File System...702buildbot # [ 6.414096] systemd[1]: Starting Create List of Static Device Nodes...703buildbot # [ 6.415352] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio704buildbot # [ 6.424130] systemd[1]: Starting Load Kernel Module configfs...705buildbot # [ 6.426847] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm706buildbot # [ 6.428516] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore707buildbot # [ 6.430959] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse708buildbot # [ 6.438521] systemd[1]: Mounting FUSE Control File System...709buildbot # [ 6.440651] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67710buildbot # [ 6.468564] systemd[1]: Starting Journal Service...711buildbot # [ 6.488588] systemd[1]: Starting Load Kernel Modules...712buildbot # [ 6.509699] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...713buildbot # [ 6.520954] systemd[1]: Starting Remount Root and Kernel File Systems...714buildbot # [ 6.524592] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki715buildbot # [ 6.539724] systemd[1]: Starting Coldplug All udev Devices...716buildbot # [ 6.555975] systemd[1]: Listening on Journal Log Access Socket.717buildbot # [ 6.565474] systemd[1]: Mounted Huge Pages File System.718buildbot # [ 6.570779] systemd[1]: Mounted POSIX Message Queue File System.719buildbot # [ 6.576610] systemd[1]: Mounted Kernel Debug File System.720buildbot # [ 6.582330] systemd-journald[269]: Collecting audit messages is enabled.721buildbot # [ 6.583696] systemd[1]: Mounted Kernel Trace File System.722buildbot # [ 6.589573] systemd[1]: Finished Create List of Static Device Nodes.723buildbot # [ 6.590796] loop: module loaded724buildbot # [ 6.595908] EXT4-fs (vda): re-mounted 609ecef4-56a7-469e-b6d8-58d9e529ddec.725buildbot # [ 6.597879] systemd[1]: modprobe@configfs.service: Deactivated successfully.726buildbot # [ 6.605458] systemd[1]: Finished Load Kernel Module configfs.727buildbot # [ 6.611609] systemd[1]: Mounted FUSE Control File System.728buildbot # [ 6.617592] systemd[1]: Finished Remount Root and Kernel File Systems.729buildbot # [ 6.492102] systemd[1]: Queued start job for default target Multi-User System.730buildbot # [ 6.493301] systemd[1]: systemd-journald.service: Deactivated successfully.731buildbot # [ 6.494594] systemd-modules-load[270]: Inserted module 'loop'732buildbot # [ 6.628210] systemd[1]: Started Journal Service.733buildbot # [ 6.505425] systemd-modules-load[270]: Inserted module 'tls'734buildbot # [ 6.513188] systemd[1]: Finished Load Kernel Modules.735buildbot # [ 6.523143] systemd[1]: Listening on Disk Image Download Service Socket.736buildbot # [ 6.528854] systemd[1]: Mounting Kernel Configuration File System...737buildbot # [ 6.531855] systemd[1]: Starting Flush Journal to Persistent Storage...738buildbot # [ 6.534167] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore739buildbot # [ 6.541152] systemd[1]: Starting Load/Save OS Random Seed...740buildbot # [ 6.546368] systemd-oomd[271]: No swap; memory pressure usage will be degraded741buildbot # [ 6.561110] systemd[1]: Starting Apply Kernel Variables...742buildbot # [ 6.567964] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...743buildbot # [ 6.569075] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki744buildbot # [ 6.570274] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.745buildbot # [ 6.753259] systemd-journald[269]: Received client request to flush runtime journal.746buildbot # [ 6.718142] systemd[1]: Mounted Kernel Configuration File System.747buildbot # [ 6.720057] systemd[1]: Finished Load/Save OS Random Seed.748buildbot # [ 6.721521] systemd[1]: Reached target First Boot Complete.749buildbot # [ 6.723229] systemd[1]: Finished Apply Kernel Variables.750buildbot # [ 6.724468] systemd[1]: Finished Flush Journal to Persistent Storage.751buildbot # [ 6.733661] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.752buildbot # [ 6.738168] systemd[1]: Starting Create Static Device Nodes in /dev...753buildbot # [ 6.808762] systemd[1]: Finished Create Static Device Nodes in /dev.754buildbot # [ 6.812088] systemd[1]: Reached target Preparation for Local File Systems.755buildbot # [ 6.815373] systemd[1]: Starting Rule-based Manager for Device Events and Files...756buildbot # [ 6.841625] systemd[1]: Finished Coldplug All udev Devices.757buildbot # [ 6.883812] systemd-udevd[301]: Using default interface naming scheme 'v260'.758buildbot # [ 6.985155] systemd[1]: Started Rule-based Manager for Device Events and Files.759buildbot # [ 7.072089] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse760buildbot # [ 7.127157] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.761buildbot # [ 7.135599] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.762buildbot # [ 7.173824] (udev-worker)[304]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.763buildbot # [ 7.180176] (udev-worker)[308]: Network interface NamePolicy= disabled on kernel command line.764buildbot # [ 7.181598] (udev-worker)[304]: Network interface NamePolicy= disabled on kernel command line.765buildbot # [ 7.202992] systemd[1]: Mounting /run/wrappers...766buildbot # [ 7.235363] systemd[1]: Mounted /run/wrappers.767buildbot # [ 7.236512] systemd[1]: Reached target Local File Systems.768buildbot # [ 7.240070] systemd[1]: Listening on Boot Loader Control Service Socket.769buildbot # [ 7.242698] systemd[1]: Starting register-nix-paths.service...770buildbot # [ 7.246490] systemd[1]: Starting Create SUID/SGID Wrappers...771buildbot # [ 7.248150] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.772buildbot # [ 7.253688] systemd[1]: Starting Save Transient machine-id to Disk...773buildbot # [ 7.261453] systemd[1]: Starting Create System Files and Directories...774buildbot # [ 7.339251] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.775buildbot # [ 7.347728] systemd[1]: Finished Save Transient machine-id to Disk.776buildbot # [ 7.408317] systemd[1]: Finished Create System Files and Directories.777buildbot # [ 7.415182] systemd[1]: Condition check resulted in Virtio network device being skipped.778buildbot # [ 7.416477] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore779buildbot # [ 7.418618] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.780buildbot # [ 7.421210] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67781buildbot # [ 7.427110] systemd[1]: Starting Rebuild Journal Catalog...782buildbot # [ 7.428499] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore783buildbot # [ 7.431150] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki784buildbot # [ 7.432985] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki785buildbot # [ 7.437675] systemd[1]: Starting Record System Boot/Shutdown in UTMP...786buildbot # [ 7.511266] systemd[1]: Finished Record System Boot/Shutdown in UTMP.787buildbot # [ 7.550945] systemd[1]: Finished Rebuild Journal Catalog.788buildbot # [ 7.557233] systemd[1]: Starting Update is Completed...789buildbot # [ 7.730185] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3790buildbot # [ 7.606127] systemd[1]: Finished Update is Completed.791buildbot # [ 7.739907] mousedev: PS/2 mouse device common for all mice792buildbot # [ 7.784255] ACPI: button: Power Button [PWRF]793buildbot # [ 7.844625] rtc_cmos 00:05: RTC can wake from S4794buildbot # [ 7.852961] Floppy drive(s): fd0 is 2.88M AMI BIOS795buildbot # [ 7.866448] rtc_cmos 00:05: registered as rtc0796buildbot # [ 7.869200] parport_pc 00:03: reported by Plug and Play ACPI797buildbot # [ 7.884726] rtc_cmos 00:05: setting system clock to 2026-09-20T07:22:41 UTC (1789888961)798buildbot # [ 7.886161] systemd-journald[269]: Time jumped backwards, rotating.799buildbot # [ 7.895884] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs800buildbot # [ 7.910912] FDC 0 is a S82078B801buildbot # [ 7.913426] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]802buildbot # [ 7.832343] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.803buildbot # [ 7.834283] systemd[1]: Finished Create SUID/SGID Wrappers.804buildbot # [ 7.976489] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console805buildbot # [ 7.995591] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0806buildbot # [ 8.055789] systemd[1]: Starting Virtual Console Setup...807buildbot # [ 7.995665] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD808buildbot # [ 8.030164] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4809buildbot # [ 8.054172] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6810buildbot # [ 8.054408] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5811buildbot # [ 8.181535] Console: switching to colour dummy device 80x25812buildbot # [ 8.251984] [drm] Found bochs VGA, ID 0xb0c5.813buildbot # [ 8.251986] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.814buildbot # [ 8.270247] ppdev: user-space parallel port driver815buildbot # [ 8.289417] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic816buildbot # [ 8.290199] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0817buildbot # [ 8.220129] systemd[1]: Finished register-nix-paths.service.818buildbot # [ 8.222067] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.819buildbot # [ 8.225091] systemd[1]: Stopped Virtual Console Setup.820buildbot # [ 8.234255] systemd[1]: Starting Virtual Console Setup...821buildbot # [ 8.368571] fbcon: bochs-drmdrmfb (fb0) is primary device822buildbot # [ 8.397461] Console: switching to colour frame buffer device 160x50823buildbot # [ 8.400998] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device824buildbot # [ 8.275902] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.825buildbot # [ 8.277443] systemd[1]: Stopped Virtual Console Setup.826buildbot # [ 8.282186] systemd[1]: Starting Virtual Console Setup...827buildbot # [ 8.484727] kvm_amd: TSC scaling supported828buildbot # [ 8.485275] kvm_amd: Nested Virtualization enabled829buildbot # [ 8.485763] kvm_amd: Nested Paging enabled830buildbot # [ 8.486792] kvm_amd: LBR virtualization supported831buildbot # [ 8.487500] kvm_amd: Virtual VMLOAD VMSAVE supported832buildbot # [ 8.488287] kvm_amd: Virtual GIF supported833buildbot # [ 8.488733] kvm_amd: Virtual NMI enabled834buildbot # [ 8.529779] EDAC MC: Ver: 3.0.0835buildbot # [ 8.684407] systemd-vconsole-setup[405]: Configuration of first virtual console was skipped, ignoring remaining ones.836buildbot # [ 8.688725] systemd[1]: Finished Virtual Console Setup.837buildbot # [ 8.690757] systemd[1]: Reached target System Initialization.838buildbot # [ 8.692597] systemd[1]: Started Discard unused filesystem blocks once a week.839buildbot # [ 8.693615] systemd[1]: Started Daily Cleanup of Temporary Directories.840buildbot # [ 8.694672] systemd[1]: Reached target Timer Units.841buildbot # [ 8.695529] systemd[1]: Listening on D-Bus System Message Bus Socket.842buildbot # [ 8.696774] systemd[1]: Listening on Nix Daemon Socket.843buildbot # [ 8.698299] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).844buildbot # [ 8.699705] systemd[1]: Listening on Hostname Service Socket.845buildbot # [ 8.701139] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.846buildbot # [ 8.702249] systemd[1]: Reached target Socket Units.847buildbot # [ 8.702964] systemd[1]: Reached target Basic System.848buildbot # [ 8.705497] systemd[1]: Started backdoor.service.849buildbot # [ 8.708119] systemd[1]: Starting Import lastlog data into lastlog2 database...850buildbot # [ 8.711137] systemd[1]: Starting Name Service Cache Daemon (nsncd)...851buildbot # [ 8.713890] systemd[1]: Starting Post-Boot Actions...852buildbot # [ 8.718838] systemd[1]: Started Reset console on configuration changes.853buildbot # [ 8.727154] systemd[1]: Starting resolvconf update...854buildbot # [ 8.729660] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.855buildbot # [ 8.752670] systemd[1]: Starting D-Bus System Message Bus...856buildbot # [ 8.798254] systemd[1]: Finished Post-Boot Actions.857buildbot # connecting to host...858buildbot # [ 8.836388] systemd[1]: Finished Import lastlog data into lastlog2 database.859buildbot # [ 8.840903] systemd[1]: Started Name Service Cache Daemon (nsncd).860buildbot # [ 8.841825] systemd[1]: Reached target Host and Network Name Lookups.861buildbot # [ 8.842692] systemd[1]: Reached target User and Group Name Lookups.862buildbot # [ 8.845768] nsncd[411]: Sep 20 07:22:42.581 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"863buildbot # [ 8.853674] systemd[1]: Starting User Login Management...864buildbot: Guest shell says: b'Spawning backdoor root shell...\n'865buildbot: connected to guest root shell866buildbot: (connecting took 9.54 seconds)867buildbot: (finished: waiting for the VM to finish booting, in 9.81 seconds)868buildbot # [ 8.908986] dbus-broker-launch[416]: Looking up NSS user entry for 'systemd-timesync'...869buildbot # [ 8.952554] dbus-broker-launch[416]: NSS returned no entry for 'systemd-timesync'870buildbot # [ 8.954181] dbus-broker-launch[416]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"871buildbot # [ 8.958633] systemd[1]: Stopped target Host and Network Name Lookups.872buildbot # [ 8.959643] systemd[1]: Stopping Host and Network Name Lookups...873buildbot # [ 8.961196] systemd[1]: Stopped target User and Group Name Lookups.874buildbot # [ 8.963151] systemd[1]: Stopping User and Group Name Lookups...875buildbot # [ 8.964730] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...876buildbot # [ 8.968471] systemd[1]: nscd.service: Deactivated successfully.877buildbot # [ 8.970931] systemd[1]: Stopped Name Service Cache Daemon (nsncd).878buildbot # [ 8.986693] systemd-logind[438]: New seat seat0.879buildbot # [ 8.995755] systemd-logind[438]: Watching system buttons on /dev/input/event2 (Power Button)880buildbot # [ 8.997966] systemd-logind[438]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)881buildbot # [ 9.000135] systemd-logind[438]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)882buildbot # [ 9.002381] systemd[1]: Starting Name Service Cache Daemon (nsncd)...883buildbot # [ 9.004459] systemd[1]: Started User Login Management.884buildbot # [ 9.015837] systemd[1]: Starting linger-users.service...885buildbot # [ 9.016667] systemd[1]: Started D-Bus System Message Bus.886buildbot # [ 9.058136] dbus-broker-launch[416]: Ready887buildbot # [ 9.089488] systemd[1]: Finished resolvconf update.888buildbot # [ 9.093313] systemd[1]: Started Name Service Cache Daemon (nsncd).889buildbot # [ 9.094356] nsncd[487]: Sep 20 07:22:42.838 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"890buildbot # [ 9.096151] systemd[1]: linger-users.service: Deactivated successfully.891buildbot # [ 9.097744] systemd[1]: Finished linger-users.service.892buildbot # [ 9.100044] systemd[1]: Reached target Preparation for Network.893buildbot # [ 9.101315] systemd[1]: Reached target Host and Network Name Lookups.894buildbot # [ 9.102567] systemd[1]: Reached target User and Group Name Lookups.895buildbot # [ 9.106556] systemd[1]: Starting DHCP Client...896buildbot # [ 9.110068] systemd[1]: Starting Address configuration of eth1...897buildbot # [ 9.112852] systemd[1]: Starting Extra networking commands....898buildbot # [ 9.220971] network-addresses-eth1-start[515]: adding address 192.168.1.1/24... done899buildbot # [ 9.237388] network-addresses-eth1-start[515]: adding address 2001:db8:1::1/64... done900buildbot # [ 9.260680] systemd[1]: Finished Address configuration of eth1.901buildbot # [ 9.276334] dhcpcd[523]: dhcpcd-10.3.2 starting902buildbot # [ 9.284752] systemd[1]: Finished Extra networking commands..903buildbot # [ 9.286557] systemd[1]: Reached target Network.904buildbot # [ 9.290896] systemd[1]: Starting Nginx Web Server...905buildbot # [ 9.292166] dhcpcd[572]: dev: loaded udev906buildbot # [ 9.296138] systemd[1]: Starting PostgreSQL Server...907buildbot # [ 9.301172] systemd[1]: Starting SSH Daemon...908buildbot # [ 9.310083] systemd[1]: Starting Permit User Sessions...909buildbot # [ 9.453770] 8021q: 802.1Q VLAN Support v1.8910buildbot # [ 9.458715] 8021q: adding VLAN 0 to HW filter on device eth1911buildbot # [ 9.388809] systemd[1]: Finished Permit User Sessions.912buildbot # [ 9.399080] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.913buildbot # [ 9.405321] systemd[1]: Started Getty on tty1.914buildbot # [ 9.406031] systemd[1]: Reached target Login Prompts.915buildbot # [ 9.429465] sshd[576]: Server listening on 0.0.0.0 port 22.916buildbot # [ 9.432394] sshd[576]: Server listening on :: port 22.917buildbot # [ 9.433195] systemd[1]: Started SSH Daemon.918buildbot # [ 9.442543] systemd[1]: Starting Setup git test repository with scheduled effects...919buildbot # [ 9.643970] cfg80211: Loading compiled-in X.509 certificates for regulatory database920buildbot # [ 9.675216] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'921buildbot # [ 9.675940] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'922buildbot # [ 9.680212] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2923buildbot # [ 9.681080] cfg80211: failed to load regulatory.db924buildbot # [ 9.602326] setup-git-repo-start[596]: hint: Using 'master' as the name for the initial branch. This default branch name925buildbot # [ 9.603722] setup-git-repo-start[596]: hint: will change to "main" in Git 3.0. To configure the initial branch name926buildbot # [ 9.605024] setup-git-repo-start[596]: hint: to use in all of your new repositories, which will suppress this warning,927buildbot # [ 9.606298] setup-git-repo-start[596]: hint: call:928buildbot # [ 9.606927] setup-git-repo-start[596]: hint:929buildbot # [ 9.610100] setup-git-repo-start[596]: hint: git config --global init.defaultBranch <name>930buildbot # [ 9.611202] setup-git-repo-start[596]: hint:931buildbot # [ 9.611753] setup-git-repo-start[596]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and932buildbot # [ 9.612954] setup-git-repo-start[596]: hint: 'development'. The just-created branch can be renamed via this command:933buildbot # [ 9.614243] setup-git-repo-start[596]: hint:934buildbot # [ 9.614794] setup-git-repo-start[596]: hint: git branch -m <name>935buildbot # [ 9.615589] setup-git-repo-start[596]: hint:936buildbot # [ 9.617353] setup-git-repo-start[596]: hint: Disable this message with "git config set advice.defaultBranchName false"937buildbot # [ 9.619594] setup-git-repo-start[596]: Initialized empty Git repository in /srv/repos/test-flake.git/938buildbot # [ 9.774430] 8021q: adding VLAN 0 to HW filter on device eth0939buildbot # [ 9.645787] dhcpcd[572]: eth0: waiting for carrier940buildbot # [ 9.647428] dhcpcd[572]: eth0: carrier acquired941buildbot # [ 9.662448] postgresql-pre-start[591]: The files belonging to this database system will be owned by user "postgres".942buildbot # [ 9.664351] postgresql-pre-start[591]: This user must also own the server process.943buildbot # [ 9.665519] dhcpcd[572]: DUID 00:01:00:01:32:42:46:43:52:54:00:12:34:56944buildbot # [ 9.666990] nginx-pre-start[589]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok945buildbot # [ 9.669136] dhcpcd[572]: eth0: IAID 00:12:34:56946buildbot # [ 9.670666] nginx-pre-start[589]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful947buildbot # [ 9.672308] dhcpcd[572]: eth0: adding address fe80::5054:ff:fe12:3456948buildbot # [ 9.678094] systemd[1]: Started Nginx Web Server.949buildbot # [ 9.681199] postgresql-pre-start[591]: The database cluster will be initialized with locale "en_US.UTF-8".950buildbot # [ 9.682438] postgresql-pre-start[591]: The default database encoding has accordingly been set to "UTF8".951buildbot # [ 9.683577] postgresql-pre-start[591]: The default text search configuration will be set to "english".952buildbot # [ 9.684702] postgresql-pre-start[591]: Data page checksums are disabled.953buildbot # [ 9.685576] postgresql-pre-start[591]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok954buildbot # [ 9.687560] postgresql-pre-start[591]: creating subdirectories ... ok955buildbot # [ 9.689245] postgresql-pre-start[591]: selecting dynamic shared memory implementation ... posix956buildbot # [ 9.696431] setup-git-repo-start[610]: hint: Using 'master' as the name for the initial branch. This default branch name957buildbot # [ 9.699102] setup-git-repo-start[610]: hint: will change to "main" in Git 3.0. To configure the initial branch name958buildbot # [ 9.700407] setup-git-repo-start[610]: hint: to use in all of your new repositories, which will suppress this warning,959buildbot # [ 9.701661] setup-git-repo-start[610]: hint: call:960buildbot # [ 9.702298] setup-git-repo-start[610]: hint:961buildbot # [ 9.702850] setup-git-repo-start[610]: hint: git config --global init.defaultBranch <name>962buildbot # [ 9.703931] setup-git-repo-start[610]: hint:963buildbot # [ 9.704851] setup-git-repo-start[610]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and964buildbot # [ 9.706548] setup-git-repo-start[610]: hint: 'development'. The just-created branch can be renamed via this command:965buildbot # [ 9.708236] setup-git-repo-start[610]: hint:966buildbot # [ 9.708822] setup-git-repo-start[610]: hint: git branch -m <name>967buildbot # [ 9.709939] setup-git-repo-start[610]: hint:968buildbot # [ 9.710883] setup-git-repo-start[610]: hint: Disable this message with "git config set advice.defaultBranchName false"969buildbot # [ 9.712848] setup-git-repo-start[610]: Initialized empty Git repository in /tmp/test-flake/.git/970buildbot # [ 9.785961] setup-git-repo-start[621]: [master (root-commit) 42e8fd4] Initial commit with scheduled effects971buildbot # [ 9.788131] setup-git-repo-start[621]: 3 files changed, 131 insertions(+)972buildbot # [ 9.789031] setup-git-repo-start[621]: create mode 100644 effects-lib.nix973buildbot # [ 9.789888] setup-git-repo-start[621]: create mode 100644 flake.lock974buildbot # [ 9.790832] setup-git-repo-start[621]: create mode 100644 flake.nix975buildbot # [ 9.820282] postgresql-pre-start[591]: selecting default "max_connections" ... 100976buildbot # [ 9.889427] setup-git-repo-start[625]: To /srv/repos/test-flake.git977buildbot # [ 9.890991] setup-git-repo-start[625]: * [new branch] master -> master978buildbot # [ 9.892091] setup-git-repo-start[625]: branch 'master' set up to track 'origin/master'.979buildbot # [ 9.897090] systemd[1]: Finished Setup git test repository with scheduled effects.980buildbot # [ 9.898452] postgresql-pre-start[591]: selecting default "shared_buffers" ... 128MB981buildbot: (finished: waiting for unit sshd.service, in 11.07 seconds)982buildbot: waiting for unit setup-git-repo.service983buildbot: (finished: waiting for unit setup-git-repo.service, in 0.05 seconds)984buildbot: waiting for unit multi-user.target985buildbot # [ 11.400337] dhcpcd[572]: eth0: soliciting a DHCP lease986buildbot # [ 11.545085] NET: Registered PF_PACKET protocol family987buildbot # [ 11.419407] dhcpcd[572]: eth0: offered 10.0.2.15 from 10.0.2.2988buildbot # [ 11.422205] dhcpcd[572]: eth0: probing address 10.0.2.15/24989buildbot # [ 11.723779] postgresql-pre-start[591]: selecting default time zone ... UTC990buildbot # [ 11.727958] postgresql-pre-start[591]: creating configuration files ... ok991buildbot # [ 11.777289] dhcpcd[572]: eth0: soliciting an IPv6 router992buildbot # [ 11.778449] dhcpcd[572]: eth0: Router Advertisement from fe80::2993buildbot # [ 11.779280] dhcpcd[572]: eth0: adding address fec0::5054:ff:fe12:3456/64994buildbot # [ 11.780116] dhcpcd[572]: eth0: adding route to fec0::/64995buildbot # [ 11.780824] dhcpcd[572]: eth0: adding default route via fe80::2996buildbot # [ 11.927513] postgresql-pre-start[591]: running bootstrap script ... ok997buildbot # [ 12.488105] postgresql-pre-start[591]: performing post-bootstrap initialization ... ok998buildbot # [ 12.602341] postgresql-pre-start[591]: syncing data to disk ... ok999buildbot # [ 12.603447] postgresql-pre-start[591]: initdb: warning: enabling "trust" authentication for local connections1000buildbot # [ 12.605458] postgresql-pre-start[591]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1001buildbot # [ 12.607414] postgresql-pre-start[591]: Success. You can now start the database server using:1002buildbot # [ 12.608437] postgresql-pre-start[591]: pg_ctl -D /var/lib/postgresql/17 -l logfile start1003buildbot # [ 12.722406] postgres[684]: [684] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1004buildbot # [ 12.735494] postgres[684]: [684] LOG: listening on IPv6 address "::1", port 54321005buildbot # [ 12.736538] postgres[684]: [684] LOG: listening on IPv4 address "127.0.0.1", port 54321006buildbot # [ 12.739092] postgres[684]: [684] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1007buildbot # [ 12.750167] postgres[690]: [690] LOG: database system was shut down at 2026-09-20 07:22:46 GMT1008buildbot # [ 12.757654] postgres[684]: [684] LOG: database system is ready to accept connections1009buildbot # [ 12.764597] systemd[1]: Started PostgreSQL Server.1010buildbot # [ 12.768369] systemd[1]: Starting PostgreSQL Setup Scripts...1011buildbot # [ 12.924710] postgresql-setup-start[701]: CREATE DATABASE1012buildbot # [ 12.970168] postgresql-setup-start[706]: CREATE ROLE1013buildbot # [ 12.992612] postgresql-setup-start[708]: ALTER DATABASE1014buildbot # [ 12.998337] systemd[1]: Finished PostgreSQL Setup Scripts.1015buildbot # [ 12.999787] systemd[1]: Reached target PostgreSQL.1016buildbot # [ 13.003433] systemd[1]: Starting Buildbot Continuous Integration Server....1017buildbot # [ 13.054755] buildbot-master-pre-start[713]: mkdir: created directory '/var/lib/buildbot/master'1018buildbot # [ 16.405083] dhcpcd[572]: eth0: leased 10.0.2.15 for 86400 seconds1019buildbot # [ 16.406169] dhcpcd[572]: eth0: adding route to 10.0.2.0/241020buildbot # [ 16.406898] dhcpcd[572]: eth0: adding default route via 10.0.2.21021buildbot # [ 16.516607] systemd[1]: Started DHCP Client.1022buildbot # [ 19.236148] buildbot-master-pre-start[715]: updating existing installation1023buildbot # [ 19.237127] buildbot-master-pre-start[715]: not touching existing buildbot.tac1024buildbot # [ 19.238177] buildbot-master-pre-start[715]: creating buildbot.tac.new instead1025buildbot # [ 19.239240] buildbot-master-pre-start[715]: creating /var/lib/buildbot/master/master.cfg.sample1026buildbot # [ 19.240473] buildbot-master-pre-start[715]: creating database (postgresql://@/buildbot)1027buildbot # [ 19.241627] buildbot-master-pre-start[715]: buildmaster configured in /var/lib/buildbot/master1028buildbot # [ 19.418870] systemd[1]: Started Buildbot Continuous Integration Server..1029buildbot # [ 19.423672] systemd[1]: Started Buildbot Worker..1030buildbot # [ 19.424712] systemd[1]: Reached target Multi-User System.1031buildbot # [ 19.426258] systemd[1]: Startup finished in 805ms (kernel) + 3.756s (initrd) + 14.863s (userspace) = 19.426s.1032buildbot: (finished: waiting for unit multi-user.target, in 9.88 seconds)1033subtest: Master and worker services start1034buildbot: waiting for unit buildbot-master.service1035buildbot: (finished: waiting for unit buildbot-master.service, in 0.07 seconds)1036buildbot: waiting for unit buildbot-worker.service1037buildbot: (finished: waiting for unit buildbot-worker.service, in 0.07 seconds)1038buildbot: waiting for TCP port 8010 on localhost1039buildbot # [ 20.868375] twistd[829]: Starting worker local-worker-0001040buildbot # [ 20.870159] twistd[829]: 2026-09-20T07:22:53+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1041buildbot # [ 20.871700] twistd[829]: 2026-09-20T07:22:54+0000 [-] Loaded.1042buildbot # [ 20.872489] twistd[829]: 2026-09-20T07:22:54+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1043buildbot # [ 20.874734] twistd[829]: 2026-09-20T07:22:54+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1044buildbot # [ 20.876858] twistd[829]: 2026-09-20T07:22:54+0000 [-] Starting Worker -- version: 2026.06.261045buildbot # [ 20.878249] twistd[829]: 2026-09-20T07:22:54+0000 [-] recording hostname in twistd.hostname1046buildbot # [ 20.879510] twistd[829]: 2026-09-20T07:22:54+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x7700a6e4c590>1047buildbot # [ 20.889691] twistd[829]: 2026-09-20T07:22:54+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x7700a6e4cad0> in 1.84258537327009 seconds.1048buildbot # [ 20.892309] twistd[829]: 2026-09-20T07:22:54+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x7700a6e4c590>1049buildbot # [ 22.738223] twistd[829]: 2026-09-20T07:22:56+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x7700a6e4c590>1050buildbot # [ 22.743256] twistd[829]: 2026-09-20T07:22:56+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x7700a6e4cad0> in 2.4095340083427415 seconds.1051buildbot # [ 22.746031] twistd[829]: 2026-09-20T07:22:56+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x7700a6e4c590>1052buildbot # [ 22.810800] twistd[828]: 2026-09-20T07:22:53+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1053buildbot # [ 22.812025] twistd[828]: 2026-09-20T07:22:56+0000 [-] Loaded.1054buildbot # [ 22.812704] twistd[828]: 2026-09-20T07:22:56+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1055buildbot # [ 22.814733] twistd[828]: 2026-09-20T07:22:56+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1056buildbot # [ 22.816709] twistd[828]: 2026-09-20T07:22:56+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01057buildbot # [ 22.826327] twistd[828]: 2026-09-20T07:22:56+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1058buildbot # [ 23.678079] twistd[828]: 2026-09-20T07:22:57+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1059buildbot # [ 23.772194] twistd[828]: 2026-09-20T07:22:57+0000 [-] adding 9 new builders, removing 01060buildbot # [ 23.875069] twistd[828]: 2026-09-20T07:22:57+0000 [-] adding 3 new services, removing 01061buildbot # [ 24.003416] twistd[828]: 2026-09-20T07:22:57+0000 [-] adding 1 new change_sources, removing 01062buildbot # [ 24.008185] twistd[828]: 2026-09-20T07:22:57+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1063buildbot # [ 24.015067] twistd[828]: 2026-09-20T07:22:57+0000 [-] adding 14 new schedulers, removing 01064buildbot # [ 24.149529] twistd[828]: 2026-09-20T07:22:57+0000 [-] BuildbotSite starting on 80101065buildbot # [ 24.150769] twistd[828]: 2026-09-20T07:22:57+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x781ecc8d8980>1066buildbot # [ 24.153246] twistd[828]: 2026-09-20T07:22:57+0000 [-] adding 5 new workers, removing 01067buildbot # [ 24.164551] twistd[828]: 2026-09-20T07:22:57+0000 [-] PBServerFactory starting on 99891068buildbot # [ 24.165890] twistd[828]: 2026-09-20T07:22:57+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x781ecc8d9400>1069buildbot # [ 24.191383] twistd[828]: 2026-09-20T07:22:57+0000 [-] Starting Worker -- version: 2026.06.261070buildbot # [ 24.192502] twistd[828]: 2026-09-20T07:22:57+0000 [-] recording hostname in twistd.hostname1071buildbot # [ 24.193499] twistd[828]: 2026-09-20T07:22:57+0000 [-] message from master: attached1072buildbot # [ 24.195774] twistd[828]: 2026-09-20T07:22:57+0000 [-] Got workerinfo from '__Janitor'1073buildbot # [ 24.204065] twistd[828]: 2026-09-20T07:22:57+0000 [-] bot attached1074buildbot # [ 24.205648] twistd[828]: 2026-09-20T07:22:57+0000 [-] Worker __Janitor attached to __Janitor1075buildbot # [ 24.206679] twistd[828]: 2026-09-20T07:22:57+0000 [-] message from master: attached1076buildbot # [ 24.245144] twistd[828]: 2026-09-20T07:22:57+0000 [-] BuildMaster is running1077buildbot # [ 24.306876] sshd-session[888]: Accepted publickey for root from ::1 port 60328 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81078buildbot # [ 24.321143] sshd-session[888]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1079buildbot # [ 24.367110] systemd[1]: Created slice Slice /user/0.1080buildbot # [ 24.372162] systemd[1]: Starting User Runtime Directory /run/user/0...1081buildbot # [ 24.382265] systemd-logind[438]: New session '1' of user 'root' with class 'user' and type 'tty'.1082buildbot # [ 24.416641] systemd[1]: Finished User Runtime Directory /run/user/0.1083buildbot # [ 24.422184] systemd[1]: Starting User Manager for UID 0...1084buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1085buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.26 seconds)1086buildbot: waiting for success: curl --fail --head http://localhost:80101087buildbot # [ 24.462975] (systemd)[898]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1088buildbot # [ 24.469445] systemd-logind[438]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1089buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1090buildbot # Dload Upload Total Spent Left Speed1091buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01092buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.21 seconds)1093(finished: subtest: Master and worker services start, in 4.60 seconds)1094subtest: Project is registered1095buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1096buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1097buildbot # Dload Upload Total Spent Left Speed1098buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 8824 0 0100 266 100 266 0 0 7181 0 0100 266 100 266 0 0 6000 0 01099buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.10 seconds)1100(finished: subtest: Project is registered, in 0.10 seconds)1101subtest: CLI list-schedules works1102buildbot: must succeed: 1103 cd /tmp/test-flake1104 buildbot-effects list-schedules1105 1106buildbot # [ 24.854831] systemd[898]: Queued start job for default target Main User Target.1107buildbot # [ 24.858827] systemd[898]: Created slice User Application Slice.1108buildbot # [ 24.860058] systemd[898]: Started Daily Cleanup of User's Temporary Directories.1109buildbot # [ 24.862054] systemd[898]: Reached target Paths.1110buildbot # [ 24.863458] systemd[898]: Reached target Timers.1111buildbot # [ 24.866660] systemd[898]: Starting D-Bus User Message Bus Socket...1112buildbot # [ 24.869058] systemd[898]: Starting Create User Files and Directories...1113buildbot # [ 24.919633] systemd[898]: Finished Create User Files and Directories.1114buildbot # [ 24.994559] systemd[898]: Listening on D-Bus User Message Bus Socket.1115buildbot # [ 24.996284] systemd[898]: Reached target Sockets.1116buildbot # [ 24.998766] systemd[898]: Reached target Basic System.1117buildbot # [ 25.000329] systemd[898]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1118buildbot # [ 25.002401] systemd[898]: Reached target Main User Target.1119buildbot # [ 25.003723] systemd[898]: Startup finished in 486ms.1120buildbot # [ 25.004908] systemd[1]: Started User Manager for UID 0.1121buildbot # [ 25.006744] systemd[1]: Started Session 1 of User root.1122buildbot # [ 25.047861] sshd-session[924]: Received disconnect from ::1 port 60328:11: disconnected by user1123buildbot # [ 25.049331] sshd-session[924]: Disconnected from user root ::1 port 603281124buildbot # [ 25.050821] sshd-session[888]: pam_unix(sshd:session): session closed for user root1125buildbot # [ 25.058937] systemd[1]: session-1.scope: Deactivated successfully.1126buildbot # [ 25.061421] systemd-logind[438]: Session 1 logged out. Waiting for processes to exit.1127buildbot # [ 25.063211] systemd-logind[438]: Removed session 1.1128buildbot # [ 25.156526] twistd[829]: 2026-09-20T07:22:58+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x7700a6e4c590>1129buildbot # [ 25.164092] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=45302)1130buildbot # [ 25.166552] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1131buildbot # [ 25.172646] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1132buildbot # [ 25.185979] twistd[828]: 2026-09-20T07:22:58+0000 [-] bot attached1133buildbot # [ 25.193873] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1134buildbot # [ 25.195339] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1135buildbot # [ 25.196788] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1136buildbot # [ 25.198277] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1137buildbot # [ 25.199761] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1138buildbot # [ 25.201272] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1139buildbot # [ 25.203989] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1140buildbot # [ 25.205504] twistd[828]: 2026-09-20T07:22:58+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1141buildbot # [ 25.206918] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1142buildbot # [ 25.208480] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1143buildbot # [ 25.209706] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1144buildbot # [ 25.211075] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1145buildbot # [ 25.212520] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1146buildbot # [ 25.213733] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1147buildbot # [ 25.215073] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1148buildbot # [ 25.216917] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] message from master: attached1149buildbot # [ 25.235366] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] Connected to buildmaster; worker is ready1150buildbot # [ 25.236624] twistd[829]: 2026-09-20T07:22:58+0000 [Broker,client] sending application-level keepalives every 600 seconds1151buildbot # [ 25.333158] sshd-session[933]: Accepted publickey for root from ::1 port 60344 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81152buildbot # [ 25.362521] sshd-session[933]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1153buildbot # [ 25.375488] systemd-logind[438]: New session '3' of user 'root' with class 'user' and type 'tty'.1154buildbot # [ 25.380437] systemd[1]: Started Session 3 of User root.1155buildbot # [ 25.422410] sshd-session[943]: Received disconnect from ::1 port 60344:11: disconnected by user1156buildbot # [ 25.424480] sshd-session[943]: Disconnected from user root ::1 port 603441157buildbot # [ 25.426702] sshd-session[933]: pam_unix(sshd:session): session closed for user root1158buildbot # [ 25.430847] systemd[1]: session-3.scope: Deactivated successfully.1159buildbot # [ 25.434729] systemd-logind[438]: Session 3 logged out. Waiting for processes to exit.1160buildbot # [ 25.436635] systemd-logind[438]: Removed session 3.1161buildbot: (finished: must succeed: 1162 cd /tmp/test-flake1163 buildbot-effects list-schedules1164 , in 0.70 seconds)1165(finished: subtest: CLI list-schedules works, in 0.70 seconds)1166subtest: Push a new commit to trigger build1167buildbot: must succeed: 1168 cd /tmp/test-flake1169 echo "# trigger rebuild" >> flake.nix1170 git add flake.nix1171 git commit -m "Trigger build"1172 git push origin master1173 1174buildbot # [ 25.464103] twistd[828]: 2026-09-20T07:22:59+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1175buildbot # Enumerating objects: 5, done.1176buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1177buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1178buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done.1179buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1180buildbot # To /srv/repos/test-flake.git1181buildbot # 42e8fd4..e180df0 master -> master1182buildbot: (finished: must succeed: 1183 cd /tmp/test-flake1184 echo "# trigger rebuild" >> flake.nix1185 git add flake.nix1186 git commit -m "Trigger build"1187 git push origin master1188 , in 0.13 seconds)1189(finished: subtest: Push a new commit to trigger build, in 0.13 seconds)1190subtest: Wait for nix-eval build to complete1191buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1192buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1193buildbot # Dload Upload Total Spent Left Speed1194buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2408 0 0100 51 100 51 0 0 1960 0 0100 51 100 51 0 0 1666 0 01195buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1196buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1197buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1198buildbot # Dload Upload Total Spent Left Speed1199buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2827 0 0100 51 100 51 0 0 2222 0 0100 51 100 51 0 0 1844 0 01200buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1201buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1202buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1203buildbot # Dload Upload Total Spent Left Speed1204buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1584 0 0100 51 100 51 0 0 1381 0 0100 51 100 51 0 0 1228 0 01205buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1206buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1207buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1208buildbot # Dload Upload Total Spent Left Speed1209buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2930 0 0100 51 100 51 0 0 2307 0 0100 51 100 51 0 0 1913 0 01210buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1211buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1212buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1213buildbot # Dload Upload Total Spent Left Speed1214buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2936 0 0100 51 100 51 0 0 2308 0 0100 51 100 51 0 0 1914 0 01215buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1216buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1217buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1218buildbot # Dload Upload Total Spent Left Speed1219buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2898 0 0100 51 100 51 0 0 2259 0 0100 51 100 51 0 0 1879 0 01220buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1221buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1222buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1223buildbot # Dload Upload Total Spent Left Speed1224buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2953 0 0100 51 100 51 0 0 2316 0 0100 51 100 51 0 0 1918 0 01225buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1226buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1227buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1228buildbot # Dload Upload Total Spent Left Speed1229buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1621 0 0100 51 100 51 0 0 1409 0 0100 51 100 51 0 0 1250 0 01230buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1231buildbot # [ 34.211682] sshd-session[1002]: Accepted publickey for root from ::1 port 42316 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81232buildbot # [ 34.222588] sshd-session[1002]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1233buildbot # [ 34.230855] systemd-logind[438]: New session '4' of user 'root' with class 'user' and type 'tty'.1234buildbot # [ 34.233692] systemd[1]: Started Session 4 of User root.1235buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1236buildbot # [ 34.263703] sshd-session[1005]: Received disconnect from ::1 port 42316:11: disconnected by user1237buildbot # [ 34.266084] sshd-session[1005]: Disconnected from user root ::1 port 423161238buildbot # [ 34.266980] sshd-session[1002]: pam_unix(sshd:session): session closed for user root1239buildbot # [ 34.276322] systemd[1]: session-4.scope: Deactivated successfully.1240buildbot # [ 34.279152] systemd-logind[438]: Session 4 logged out. Waiting for processes to exit.1241buildbot # [ 34.280612] systemd-logind[438]: Removed session 4.1242buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1243buildbot # Dload Upload Total Spent Left Speed1244buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1673 0 0100 51 100 51 0 0 1338 0 0100 51 100 51 0 0 1190 0 01245buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1246buildbot # [ 34.470100] sshd-session[1013]: Accepted publickey for root from ::1 port 42332 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81247buildbot # [ 34.480987] sshd-session[1013]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1248buildbot # [ 34.489679] systemd-logind[438]: New session '5' of user 'root' with class 'user' and type 'tty'.1249buildbot # [ 34.491241] systemd[1]: Started Session 5 of User root.1250buildbot # [ 34.535330] sshd-session[1016]: Received disconnect from ::1 port 42332:11: disconnected by user1251buildbot # [ 34.537222] sshd-session[1016]: Disconnected from user root ::1 port 423321252buildbot # [ 34.538233] sshd-session[1013]: pam_unix(sshd:session): session closed for user root1253buildbot # [ 34.545392] systemd[1]: session-5.scope: Deactivated successfully.1254buildbot # [ 34.548431] systemd-logind[438]: Session 5 logged out. Waiting for processes to exit.1255buildbot # [ 34.550616] systemd-logind[438]: Removed session 5.1256buildbot # [ 34.566822] twistd[828]: 2026-09-20T07:23:08+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1257buildbot # [ 34.599214] twistd[828]: 2026-09-20T07:23:08+0000 [-] gitpoller: processing 1 changes: ['e180df0cc874784fb291a3cfe875cd2f0881a050'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1258buildbot # [ 34.669569] twistd[828]: 2026-09-20T07:23:08+0000 [-] added change with revision e180df0cc874784fb291a3cfe875cd2f0881a050 to database1259buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1260buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1261buildbot # Dload Upload Total Spent Left Speed1262buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1710 0 0100 51 100 51 0 0 1476 0 0100 51 100 51 0 0 1303 0 01263buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1264buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1265buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1266buildbot # Dload Upload Total Spent Left Speed1267buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2996 0 0100 51 100 51 0 0 2343 0 0100 51 100 51 0 0 1941 0 01268buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds)1269buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1270buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1271buildbot # Dload Upload Total Spent Left Speed1272buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2974 0 0100 51 100 51 0 0 2276 0 0100 51 100 51 0 0 1887 0 01273buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1274buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1275buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1276buildbot # Dload Upload Total Spent Left Speed1277buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2962 0 0100 51 100 51 0 0 2318 0 0100 51 100 51 0 0 1920 0 01278buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1279buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1280buildbot # [ 39.730076] twistd[828]: 2026-09-20T07:23:13+0000 [-] added buildset 1 to database1281buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1282buildbot # Dload Upload Total Spent Left Speed1283buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3031 0 0100 51 100 51 0 0 2352 0 0100 51 100 51 0 0 1948 0 01284buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1285buildbot # [ 39.851428] twistd[828]: 2026-09-20T07:23:13+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1286buildbot # [ 39.853974] twistd[828]: 2026-09-20T07:23:13+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1287buildbot # [ 39.898563] twistd[828]: 2026-09-20T07:23:13+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1288buildbot # [ 39.902029] twistd[828]: 2026-09-20T07:23:13+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1289buildbot # [ 39.904532] twistd[828]: 2026-09-20T07:23:13+0000 [-] sending ping1290buildbot # [ 39.906782] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] message from master: ping1291buildbot # [ 39.907917] twistd[828]: 2026-09-20T07:23:13+0000 [Broker,0,127.0.0.1] ping finished: success1292buildbot # [ 39.927047] twistd[828]: 2026-09-20T07:23:13+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1293buildbot # [ 39.928377] twistd[828]: 2026-09-20T07:23:13+0000 [-] command '['git', '--version']' in dir 'build'1294buildbot # [ 39.931096] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 0): startCommand:shell1295buildbot # [ 39.932216] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1296buildbot # [ 39.933497] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '--version']): git --version1297buildbot # [ 39.935792] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1298buildbot # [ 39.937900] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1299buildbot # [ 39.939371] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1300buildbot # [ 39.942050] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '--version']): using PTY: False1301buildbot # [ 39.955399] twistd[829]: 2026-09-20T07:23:13+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0143081302buildbot # [ 39.957272] twistd[829]: 2026-09-20T07:23:13+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e4eba0>1303buildbot # [ 39.986773] twistd[828]: 2026-09-20T07:23:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01304buildbot # [ 40.018418] twistd[828]: 2026-09-20T07:23:13+0000 [-] <RemoteCommand 'stat' at 132073406399552>: RemoteCommand.run [1]1305buildbot # [ 40.030064] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 1): startCommand:stat1306buildbot # [ 40.031206] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1307buildbot # [ 40.033976] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x7700a6e4d400>1308buildbot # [ 40.036462] twistd[828]: 2026-09-20T07:23:13+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 132073406399552> rc=21309buildbot # [ 40.051044] twistd[828]: 2026-09-20T07:23:13+0000 [-] <RemoteCommand 'mkdir' at 132073675997264>: RemoteCommand.run [2]1310buildbot # [ 40.080084] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 2): startCommand:mkdir1311buildbot # [ 40.081221] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x7700a6e4d160>1312buildbot # [ 40.083549] twistd[828]: 2026-09-20T07:23:13+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 132073675997264> rc=01313buildbot # [ 40.090201] twistd[828]: 2026-09-20T07:23:13+0000 [-] <RemoteCommand 'downloadFile' at 132073675998864>: RemoteCommand.run [3]1314buildbot # [ 40.127115] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 3): startCommand:downloadFile1315buildbot # [ 40.132225] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x7700a6e4c1a0>1316buildbot # [ 40.138197] twistd[828]: 2026-09-20T07:23:13+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 132073675998864> rc=01317buildbot # [ 40.148074] twistd[828]: 2026-09-20T07:23:13+0000 [-] <RemoteCommand 'listdir' at 132073405937808>: RemoteCommand.run [4]1318buildbot # [ 40.183071] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 4): startCommand:listdir1319buildbot # [ 40.186445] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x7700a6e4d2b0>1320buildbot # [ 40.192976] twistd[828]: 2026-09-20T07:23:13+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 132073405937808> rc=01321buildbot # [ 40.206168] twistd[828]: 2026-09-20T07:23:13+0000 [-] No git repo present, making full clone1322buildbot # [ 40.208796] twistd[828]: 2026-09-20T07:23:13+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1323buildbot # [ 40.215678] twistd[828]: 2026-09-20T07:23:13+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1324buildbot # [ 40.239432] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command 5): startCommand:shell1325buildbot # [ 40.242167] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1326buildbot # [ 40.248847] twistd[829]: 2026-09-20T07:23:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1327buildbot # [ 40.270379] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1328buildbot # [ 40.274332] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1329buildbot # [ 40.277538] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1330buildbot # [ 40.282804] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1331buildbot # [ 40.482267] sshd-session[1055]: Accepted publickey for root from ::1 port 42336 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81332buildbot # [ 40.500339] sshd-session[1055]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1333buildbot # [ 40.514193] systemd-logind[438]: New session '6' of user 'root' with class 'user' and type 'tty'.1334buildbot # [ 40.516569] systemd[1]: Started Session 6 of User root.1335buildbot # [ 40.563450] sshd-session[1058]: Received disconnect from ::1 port 42336:11: disconnected by user1336buildbot # [ 40.565212] sshd-session[1058]: Disconnected from user root ::1 port 423361337buildbot # [ 40.566397] sshd-session[1055]: pam_unix(sshd:session): session closed for user root1338buildbot # [ 40.571980] systemd[1]: session-6.scope: Deactivated successfully.1339buildbot # [ 40.575402] systemd-logind[438]: Session 6 logged out. Waiting for processes to exit.1340buildbot # [ 40.577532] systemd-logind[438]: Removed session 6.1341buildbot # [ 40.590430] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3305701342buildbot # [ 40.594876] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e65090>1343buildbot # [ 40.598752] twistd[828]: 2026-09-20T07:23:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01344buildbot # [ 40.621433] twistd[828]: 2026-09-20T07:23:14+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']'>: RemoteCommand.run [6]1345buildbot # [ 40.624367] twistd[828]: 2026-09-20T07:23:14+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']' in dir 'build'1346buildbot # [ 40.645072] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command 6): startCommand:shell1347buildbot # [ 40.646562] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): RunProcess._startCommand1348buildbot # [ 40.649626] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f e180df0cc874784fb291a3cfe875cd2f0881a0501349buildbot # [ 40.654236] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1350buildbot # [ 40.658505] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): watching logfiles {}1351buildbot # [ 40.661578] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'e180df0cc874784fb291a3cfe875cd2f0881a050']1352buildbot # [ 40.666343] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): using PTY: False1353buildbot # [ 40.688579] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']): command finished with signal None, exit code 0, elapsedTime: 0.0190521354buildbot # [ 40.692614] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e65450>1355buildbot # [ 40.716896] twistd[828]: 2026-09-20T07:23:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'e180df0cc874784fb291a3cfe875cd2f0881a050']'> rc=01356buildbot # [ 40.739779] twistd[828]: 2026-09-20T07:23:14+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1357buildbot # [ 40.742620] twistd[828]: 2026-09-20T07:23:14+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1358buildbot # [ 40.762117] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command 7): startCommand:shell1359buildbot # [ 40.763604] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1360buildbot # [ 40.766614] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1361buildbot # [ 40.770901] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1362buildbot # [ 40.774537] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1363buildbot # [ 40.779426] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1364buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1365buildbot # [ 40.783890] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1366buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1367buildbot # Dload Upload Total Spent Left Speed1368buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 13592 0 0100 401 100 401 0 0 10876 0 0100 401 100 401 0 0 9117 0 01369buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1370buildbot # [ 40.921545] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1431031371buildbot # [ 40.926213] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e0a520>1372buildbot # [ 40.930644] twistd[828]: 2026-09-20T07:23:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01373buildbot # [ 40.947841] twistd[828]: 2026-09-20T07:23:14+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1374buildbot # [ 40.949775] twistd[828]: 2026-09-20T07:23:14+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1375buildbot # [ 40.976052] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command 8): startCommand:shell1376buildbot # [ 40.977452] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1377buildbot # [ 40.978987] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1378buildbot # [ 40.980490] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1379buildbot # [ 40.982561] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1380buildbot # [ 40.985884] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1381buildbot # [ 40.987448] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1382buildbot # [ 40.999952] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0155261383buildbot # [ 41.001846] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e0a650>1384buildbot # [ 41.035028] twistd[828]: 2026-09-20T07:23:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01385buildbot # [ 41.054400] twistd[828]: 2026-09-20T07:23:14+0000 [-] Got Git revision e180df0cc874784fb291a3cfe875cd2f0881a0501386buildbot # [ 41.055957] twistd[828]: 2026-09-20T07:23:14+0000 [-] <RemoteCommand 'rmdir' at 132073405939088>: RemoteCommand.run [9]1387buildbot # [ 41.078762] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command 9): startCommand:rmdir1388buildbot # [ 41.080265] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1389buildbot # [ 41.082317] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1390buildbot # [ 41.084916] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1391buildbot # [ 41.087380] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1392buildbot # [ 41.090059] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1393buildbot # [ 41.094475] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1394buildbot # [ 41.108880] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0159291395buildbot # [ 41.111545] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x7700a6e4f0e0>1396buildbot # [ 41.141719] twistd[828]: 2026-09-20T07:23:14+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 132073405939088> rc=01397buildbot # [ 41.160446] twistd[828]: 2026-09-20T07:23:14+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1398buildbot # [ 41.178379] twistd[828]: 2026-09-20T07:23:14+0000 [-] step 'git' complete: success (None)1399buildbot # [ 41.185301] twistd[828]: 2026-09-20T07:23:14+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x781ece5152b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x781ece516660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x781ece516660>)])1400buildbot # [ 41.200725] twistd[828]: 2026-09-20T07:23:14+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1401buildbot # [ 41.202578] twistd[828]: 2026-09-20T07:23:14+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1402buildbot # [ 41.205672] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command 10): startCommand:shell1403buildbot # [ 41.207401] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1404buildbot # [ 41.209394] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1405buildbot # [ 41.211764] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1406buildbot # [ 41.214345] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1407buildbot # [ 41.216259] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1408buildbot # [ 41.220054] twistd[829]: 2026-09-20T07:23:14+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1409buildbot # [ 41.241491] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0224311410buildbot # [ 41.243918] twistd[829]: 2026-09-20T07:23:14+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a742fe30>1411buildbot # [ 41.266023] twistd[828]: 2026-09-20T07:23:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01412buildbot # [ 41.271423] twistd[828]: 2026-09-20T07:23:15+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1413buildbot # [ 41.275547] twistd[828]: 2026-09-20T07:23:15+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1414buildbot # [ 41.311417] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command 11): startCommand:shell1415buildbot # [ 41.312943] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1416buildbot # [ 41.317046] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1417buildbot # [ 41.323293] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1418buildbot # [ 41.329842] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1419buildbot # [ 41.333652] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1420buildbot # [ 41.340219] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1421buildbot # [ 41.451552] systemd[1]: Started Nix Daemon.1422buildbot # [ 41.543660] nix-daemon[1103]: accepted connection from pid 1102, user buildbot-worker1423buildbot # [ 41.579064] twistd[829]: 2026-09-20T07:23:15+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.2502481424buildbot # [ 41.583976] twistd[829]: 2026-09-20T07:23:15+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e6caf0>1425buildbot # [ 41.587993] twistd[828]: 2026-09-20T07:23:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01426buildbot # [ 41.619330] twistd[828]: 2026-09-20T07:23:15+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x781ece5152b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x781ece516660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x781ece516660>)]1427buildbot # [ 41.631797] twistd[828]: 2026-09-20T07:23:15+0000 [-] step 'Evaluate flake' complete: success (None)1428buildbot # [ 41.653584] twistd[828]: 2026-09-20T07:23:15+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1429buildbot # [ 41.663120] twistd[828]: 2026-09-20T07:23:15+0000 [-] step 'build flake' complete: success (None)1430buildbot # [ 41.674556] twistd[828]: 2026-09-20T07:23:15+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x781ece36cae0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x781ece36cb80>)): []1431buildbot # [ 41.682496] twistd[828]: 2026-09-20T07:23:15+0000 [-] step 'Process skipped builds' complete: skipped (None)1432buildbot # [ 41.692593] twistd[828]: 2026-09-20T07:23:15+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1433buildbot # [ 41.695635] twistd[828]: 2026-09-20T07:23:15+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1434buildbot # [ 41.698656] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command 12): startCommand:shell1435buildbot # [ 41.700112] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1436buildbot # [ 41.702243] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1437buildbot # [ 41.704950] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1438buildbot # [ 41.707673] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1439buildbot # [ 41.709768] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1440buildbot # [ 41.714572] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1441buildbot # [ 41.728636] twistd[829]: 2026-09-20T07:23:15+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0156301442buildbot # [ 41.731216] twistd[829]: 2026-09-20T07:23:15+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e6cf30>1443buildbot # [ 41.763031] twistd[828]: 2026-09-20T07:23:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01444buildbot # [ 41.785099] twistd[828]: 2026-09-20T07:23:15+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1445buildbot # [ 41.875496] twistd[828]: 2026-09-20T07:23:15+0000 [-] step 'Cleanup drv paths' complete: success (None)1446buildbot # [ 41.889058] twistd[828]: 2026-09-20T07:23:15+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1447buildbot # [ 41.891417] twistd[828]: 2026-09-20T07:23:15+0000 [-] command '['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1448buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1449buildbot # [ 41.894879] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command 13): startCommand:shell1450buildbot # [ 41.896659] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1451buildbot # [ 41.899080] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev e180df0cc874784fb291a3cfe875cd2f0881a050 --branch master --repo test-flake1452buildbot # [ 41.904121] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1453buildbot # [ 41.906951] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1454buildbot # [ 41.909222] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'e180df0cc874784fb291a3cfe875cd2f0881a050', b'--branch', b'master', b'--repo', b'test-flake']1455buildbot # [ 41.912581] twistd[829]: 2026-09-20T07:23:15+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1456buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1457buildbot # Dload Upload Total Spent Left Speed1458buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15530 0 0100 401 100 401 0 0 12236 0 0100 401 100 401 0 0 9941 0 01459buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1460buildbot # [ 42.224312] nix-daemon[1103]: accepted connection from pid 1116, user buildbot-worker1461buildbot # [ 42.254594] twistd[829]: 2026-09-20T07:23:15+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3514241462buildbot # [ 42.258101] twistd[829]: 2026-09-20T07:23:16+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e7c550>1463buildbot # [ 42.261979] twistd[828]: 2026-09-20T07:23:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']'> rc=01464buildbot # [ 42.291975] twistd[828]: 2026-09-20T07:23:16+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x781ece36d300>, logEnviron=False)): []1465buildbot # [ 42.301422] twistd[828]: 2026-09-20T07:23:16+0000 [-] step 'Evaluate effects' complete: success (None)1466buildbot # [ 42.313332] twistd[828]: 2026-09-20T07:23:16+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1467buildbot # [ 42.319513] twistd[828]: 2026-09-20T07:23:16+0000 [-] step 'Buildbot effect' complete: success (None)1468buildbot # [ 42.329717] twistd[828]: 2026-09-20T07:23:16+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1469buildbot # [ 42.332295] twistd[828]: 2026-09-20T07:23:16+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1470buildbot # [ 42.336441] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command 14): startCommand:shell1471buildbot # [ 42.337912] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1472buildbot # [ 42.340477] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev e180df0cc874784fb291a3cfe875cd2f0881a050 --branch master --repo test-flake1473buildbot # [ 42.343738] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1474buildbot # [ 42.346964] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1475buildbot # [ 42.351056] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'e180df0cc874784fb291a3cfe875cd2f0881a050', b'--branch', b'master', b'--repo', b'test-flake']1476buildbot # [ 42.354620] twistd[829]: 2026-09-20T07:23:16+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1477buildbot # [ 42.611844] nix-daemon[1103]: accepted connection from pid 1125, user buildbot-worker1478buildbot # [ 42.640038] twistd[829]: 2026-09-20T07:23:16+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.2900751479buildbot # [ 42.642947] twistd[829]: 2026-09-20T07:23:16+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7700a6e7c850>1480buildbot # [ 42.648168] twistd[828]: 2026-09-20T07:23:16+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'e180df0cc874784fb291a3cfe875cd2f0881a050', '--branch', 'master', '--repo', 'test-flake']'> rc=01481buildbot # [ 42.683070] twistd[828]: 2026-09-20T07:23:16+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x781ece514d70>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x781ece36d4e0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x781ece36d580>, logEnviron=False)): []1482buildbot # [ 42.693894] twistd[828]: 2026-09-20T07:23:16+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1483buildbot # [ 42.695440] twistd[828]: 2026-09-20T07:23:16+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1484buildbot # [ 42.703596] twistd[828]: 2026-09-20T07:23:16+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1485buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1486buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1487buildbot # Dload Upload Total Spent Left Speed1488buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 13077 0 0100 411 100 411 0 0 11352 0 0100 411 100 411 0 0 10095 0 01489buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1490(finished: subtest: Wait for nix-eval build to complete, in 17.53 seconds)1491subtest: Schedule cache is created1492buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1493buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds)1494buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1495buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds)1496(finished: subtest: Schedule cache is created, in 0.04 seconds)1497subtest: Nightly schedulers are created1498buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1499buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1500buildbot # Dload Upload Total Spent Left Speed1501buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 60051 0 0100 3793 100 3793 0 0 55864 0 0100 3793 100 3793 0 0 52372 0 01502buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds)1503buildbot # [ 44.219511] sshd-session[1162]: Accepted publickey for root from ::1 port 55126 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81504buildbot # [ 44.237234] sshd-session[1162]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1505buildbot # [ 44.249618] systemd-logind[438]: New session '7' of user 'root' with class 'user' and type 'tty'.1506buildbot # [ 44.257598] systemd[1]: Started Session 7 of User root.1507buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1508buildbot # [ 44.290595] sshd-session[1165]: Received disconnect from ::1 port 55126:11: disconnected by user1509buildbot # [ 44.292197] sshd-session[1165]: Disconnected from user root ::1 port 551261510buildbot # [ 44.293132] sshd-session[1162]: pam_unix(sshd:session): session closed for user root1511buildbot # [ 44.300203] systemd[1]: session-7.scope: Deactivated successfully.1512buildbot # [ 44.305357] systemd-logind[438]: Session 7 logged out. Waiting for processes to exit.1513buildbot # [ 44.307164] systemd-logind[438]: Removed session 7.1514buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1515buildbot # Dload Upload Total Spent Left Speed1516buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 42085 0 0100 3793 100 3793 0 0 38399 0 0100 3793 100 3793 0 0 35707 0 01517buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds)1518buildbot # [ 44.514099] sshd-session[1173]: Accepted publickey for root from ::1 port 55134 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81519buildbot # [ 44.523705] sshd-session[1173]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1520buildbot # [ 44.532852] systemd-logind[438]: New session '8' of user 'root' with class 'user' and type 'tty'.1521buildbot # [ 44.535355] systemd[1]: Started Session 8 of User root.1522buildbot # [ 44.571056] sshd-session[1185]: Received disconnect from ::1 port 55134:11: disconnected by user1523buildbot # [ 44.572589] sshd-session[1185]: Disconnected from user root ::1 port 551341524buildbot # [ 44.573487] sshd-session[1173]: pam_unix(sshd:session): session closed for user root1525buildbot # [ 44.578767] systemd[1]: session-8.scope: Deactivated successfully.1526buildbot # [ 44.581813] systemd-logind[438]: Session 8 logged out. Waiting for processes to exit.1527buildbot # [ 44.583895] systemd-logind[438]: Removed session 8.1528buildbot # [ 44.593423] twistd[828]: 2026-09-20T07:23:18+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1529buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1530buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1531buildbot # Dload Upload Total Spent Left Speed1532buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 46982 0 0100 3793 100 3793 0 0 44131 0 0100 3793 100 3793 0 0 41931 0 01533buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1534buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1535buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1536buildbot # Dload Upload Total Spent Left Speed1537buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 50660 0 0100 3793 100 3793 0 0 47611 0 0100 3793 100 3793 0 0 45039 0 01538buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds)1539buildbot # [ 47.679365] twistd[828]: 2026-09-20T07:23:21+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1540buildbot # [ 47.684566] twistd[828]: 2026-09-20T07:23:21+0000 [-] beginning configuration update1541buildbot # [ 47.688135] twistd[828]: 2026-09-20T07:23:21+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1542buildbot # [ 47.726160] twistd[828]: 2026-09-20T07:23:21+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1543buildbot # [ 47.732108] twistd[828]: 2026-09-20T07:23:21+0000 [-] adding 1 new schedulers, removing 01544buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1545buildbot # [ 47.854124] twistd[828]: 2026-09-20T07:23:21+0000 [-] configuration update complete (took 0.170 seconds)1546buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1547buildbot # Dload Upload Total Spent Left Speed1548buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 56044 0 0100 4079 100 4079 0 0 52630 0 0100 4079 100 4079 0 0 49722 0 01549buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.20 seconds)1550buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1551buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1552buildbot # Dload Upload Total Spent Left Speed1553buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 55324 0 0100 4079 100 4079 0 0 51998 0 0100 4079 100 4079 0 0 49133 0 01554buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds)1555(finished: subtest: Nightly schedulers are created, in 4.93 seconds)1556subtest: Scheduled effect builder exists1557buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1558buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1559buildbot # Dload Upload Total Spent Left Speed1560buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 111.1k 0 0100 2371 100 2371 0 0 93185 0 0100 2371 100 2371 0 0 79284 0 01561buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.07 seconds)1562(finished: subtest: Scheduled effect builder exists, in 0.07 seconds)1563(finished: run the VM test script, in 49.12 seconds)1564test script finished in 49.16s1565cleanup1566kill QemuMachine (pid 12)1567buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13)1568(finished: cleanup, in 0.26 seconds)1569additionally exposed symbols:1570 buildbot,1571 vlan1,1572 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh