tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 12) buildbot # Formatting '/build/vm-state-buildbot/tmp.6dXHIbFl3b', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 496e5987-86ae-4fac-8443-bda059fa8cca buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/7ayv9fwhhdwz30cn6sj62rvhnkm5zkhv-nixos-system-buildbot-test/init regInfo=/nix/store/846khd4jsrir98kfk4148i3qph9aysw3-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/846khd4jsrir98kfk4148i3qph9aysw3-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000026] arm-pv: using stolen time PV buildbot # [ 0.000368] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000505] Console: colour dummy device 80x25 buildbot # [ 0.000512] printk: legacy console [tty0] enabled buildbot # [ 0.000681] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000688] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000763] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000881] landlock: Up and running. buildbot # [ 0.000883] Yama: becoming mindful. buildbot # [ 0.001272] LSM support for eBPF active buildbot # [ 0.001384] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001403] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002438] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003115] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003119] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004268] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004354] EFI services will not be available. buildbot # [ 0.004469] smp: Bringing up secondary CPUs ... buildbot # [ 0.004476] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004480] SMP: Total of 1 processors activated. buildbot # [ 0.004482] CPU: All CPU(s) started at EL1 buildbot # [ 0.004490] CPU features: detected: Branch Target Identification buildbot # [ 0.004494] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004499] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004503] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004506] CPU features: detected: Common not Private translations buildbot # [ 0.004509] CPU features: detected: CRC32 instructions buildbot # [ 0.004512] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004515] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004518] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004521] CPU features: detected: E0PD buildbot # [ 0.004523] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004526] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004529] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004532] CPU features: detected: Fine Grained Traps buildbot # [ 0.004536] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004540] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004542] CPU features: detected: LSE atomic instructions buildbot # [ 0.004545] CPU features: detected: Privileged Access Never buildbot # [ 0.004548] CPU features: detected: PMUv3 buildbot # [ 0.004550] CPU features: detected: RAS Extension Support buildbot # [ 0.004553] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004555] CPU features: detected: Random Number Generator buildbot # [ 0.004558] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004560] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004563] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004567] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004601] alternatives: applying system-wide alternatives buildbot # [ 0.007288] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007431] Memory: 895036K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.007714] devtmpfs: initialized buildbot # [ 0.009505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009527] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009548] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.009708] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.009713] 0 pages in range for non-PLT usage buildbot # [ 0.009713] 508320 pages in range for PLT usage buildbot # [ 0.009829] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010579] DMI not present or invalid. buildbot # [ 0.013785] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.015937] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016078] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016234] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016254] audit: initializing netlink subsys (disabled) buildbot # [ 0.016843] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.016845] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.016848] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.016851] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.016854] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.016878] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.016888] cpuidle: using governor ladder buildbot # [ 0.016894] cpuidle: using governor menu buildbot # [ 0.017078] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017092] ASID allocator initialised with 65536 entries buildbot # [ 0.018199] Serial: AMBA PL011 UART driver buildbot # [ 0.023169] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.023318] printk: console [ttyAMA0] enabled buildbot # [ 0.149748] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.149765] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.149770] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.149775] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.149779] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.149783] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.149788] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.149792] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.157341] fbcon: Taking over console buildbot # [ 0.157356] ACPI: Interpreter disabled. buildbot # [ 0.159203] iommu: Default domain type: Translated buildbot # [ 0.159213] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.160901] SCSI subsystem initialized buildbot # [ 0.166161] usbcore: registered new interface driver usbfs buildbot # [ 0.166190] usbcore: registered new interface driver hub buildbot # [ 0.166208] usbcore: registered new device driver usb buildbot # [ 0.166454] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.166460] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.166470] PTP clock support registered buildbot # [ 0.166523] EDAC MC: Ver: 3.0.0 buildbot # [ 0.171250] scmi_core: SCMI protocol bus registered buildbot # [ 0.172221] FPGA manager framework buildbot # [ 0.173137] vgaarb: loaded buildbot # [ 0.173769] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.174185] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.174216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.176771] netfs: FS-Cache loaded buildbot # [ 0.176879] pnp: PnP ACPI: disabled buildbot # [ 0.184774] NET: Registered PF_INET protocol family buildbot # [ 0.184935] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.213276] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.213310] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.213332] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.213376] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.213451] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.213542] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.213593] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.213655] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.213734] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.213752] NET: Registered PF_XDP protocol family buildbot # [ 0.222518] PCI: CLS 0 bytes, default 64 buildbot # [ 0.223252] Trying to unpack rootfs image as initramfs... buildbot # [ 0.230464] kvm [1]: HYP mode not available buildbot # [ 0.322169] Initialise system trusted keyrings buildbot # [ 0.322859] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.324159] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.324960] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.345558] Key type asymmetric registered buildbot # [ 0.345570] Asymmetric key parser 'x509' registered buildbot # [ 0.345617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.353829] io scheduler mq-deadline registered buildbot # [ 0.353845] io scheduler kyber registered buildbot # [ 0.361918] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.363258] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.363596] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.363611] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.363630] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.363640] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.363660] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.363682] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.363747] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.363756] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.363762] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.363768] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.363773] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.363874] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.364319] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.364541] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.364558] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.364588] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.364605] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.365097] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.365287] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.365303] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.365333] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.385319] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.385511] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.385527] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.385558] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.394097] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.394302] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.394319] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.394349] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.394816] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.395008] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.395024] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.395054] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.395522] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.395713] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.395729] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.395759] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.396222] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.396411] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.396426] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.396456] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.396473] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.396981] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.397175] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.397205] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.397669] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.415301] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.415335] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.415732] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.415921] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.416171] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.416425] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.416442] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.416473] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.416942] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.417132] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.417148] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.417178] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.417754] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.433799] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.433820] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.433886] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.433936] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.433984] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.434032] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.434079] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.434128] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.434176] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.434225] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.434273] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.434391] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.434440] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.434462] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.434484] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.434507] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.434529] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.434551] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.434577] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.434599] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.434622] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.434644] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.434668] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.434691] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.434713] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.434735] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.434757] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.434779] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.434801] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.434823] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.434845] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.434867] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.434889] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.434917] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.434927] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.434932] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.436105] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.491570] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.493720] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.503741] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.505633] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.515327] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.517279] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.521025] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.527995] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.533932] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.535686] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.545963] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.555022] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.557502] msm_serial: driver initialized buildbot # [ 0.557646] SuperH (H)SCI(F) driver initialized buildbot # [ 0.557699] STM32 USART driver initialized buildbot # [ 0.593973] loop: module loaded buildbot # [ 0.594134] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.594831] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.602304] megasas: 07.734.00.00-rc1 buildbot # [ 0.602961] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.604582] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.604608] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.606120] Using buffer write method buildbot # [ 0.606176] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.607898] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.607922] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.609685] Using buffer write method buildbot # [ 0.609712] Concatenating MTD devices: buildbot # [ 0.609717] (0): "0.flash" buildbot # [ 0.609721] (1): "0.flash" buildbot # [ 0.609724] into device "0.flash" buildbot # [ 0.840124] Freeing initrd memory: 25516K buildbot # [ 0.845893] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.849360] thunder_xcv, ver 1.0 buildbot # [ 0.849398] thunder_bgx, ver 1.0 buildbot # [ 0.849420] nicpf, ver 1.0 buildbot # [ 0.851175] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.851186] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.851214] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.851222] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.851252] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.851258] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.851279] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.851285] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.851416] sky2: driver version 1.30 buildbot # [ 0.852963] usbcore: registered new interface driver usb-storage buildbot # [ 0.853049] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.853062] usbserial: USB Serial support registered for generic buildbot # [ 0.853639] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.854350] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.854375] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.854567] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.866216] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.866511] hub 1-0:1.0: USB hub found buildbot # [ 0.866530] hub 1-0:1.0: 6 ports detected buildbot # [ 0.869389] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.869419] rtc-pl031 9010000.pl031: setting system clock to 2026-09-27T07:29:41 UTC (1790494181) buildbot # [ 0.869719] i2c_dev: i2c /dev entries driver buildbot # [ 0.874602] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.874612] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.874871] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.875237] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.876800] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.877031] usbcore: registered new interface driver usbhid buildbot # [ 0.877037] usbhid: USB HID core driver buildbot # [ 0.913048] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.914548] drop_monitor: Initializing network drop monitor service buildbot # [ 0.914687] NET: Registered PF_INET6 protocol family buildbot # [ 0.917741] Segment Routing with IPv6 buildbot # [ 0.917761] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.918769] NET: Registered PF_PACKET protocol family buildbot # [ 0.919519] 9pnet: Installing 9P2000 support buildbot # [ 0.921570] Key type dns_resolver registered buildbot # [ 0.928227] registered taskstats version 1 buildbot # [ 0.928361] Loading compiled-in X.509 certificates buildbot # [ 0.936398] Demotion targets for Node 0: null buildbot # [ 0.936490] Key type .fscrypt registered buildbot # [ 0.936496] Key type fscrypt-provisioning registered buildbot # [ 0.936587] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.936605] ima: Allocated hash algorithm: sha1 buildbot # [ 0.936624] ima: No architecture policies found buildbot # [ 0.940795] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.959020] clk: Disabling unused clocks buildbot # [ 0.959041] PM: genpd: Disabling unused power domains buildbot # [ 0.963436] Freeing unused kernel memory: 4736K buildbot # [ 0.963635] Run /init as init process buildbot # [ 0.979903] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.133802] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.281423] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.314574] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.320832] systemd[1]: Detected virtualization qemu. buildbot # [ 1.321921] systemd[1]: Detected architecture arm64. buildbot # [ 1.322923] systemd[1]: Running in initrd. buildbot # [ 1.324265] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.325752] systemd[1]: Hostname set to . buildbot # [ 1.362244] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.415558] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.423659] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.424763] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.425994] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.426938] systemd[1]: Reached target Path Units. buildbot # [ 1.427711] systemd[1]: Reached target Slice Units. buildbot # [ 1.428450] systemd[1]: Reached target Swaps. buildbot # [ 1.429121] systemd[1]: Reached target Timer Units. buildbot # [ 1.430197] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.430354] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.430512] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.430627] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.430738] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.430758] systemd[1]: Reached target Socket Units. buildbot # [ 1.436817] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.445455] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.446548] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.449407] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.460515] systemd[1]: Starting Journal Service... buildbot # [ 1.482898] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.483697] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.485833] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.501906] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.503974] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.505561] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.506704] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.511985] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.513113] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.517889] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.561264] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.561971] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.568513] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.577863] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.586000] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.586228] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.586238] [drm] features: -context_init buildbot # [ 1.586858] [drm] number of scanouts: 1 buildbot # [ 1.586876] [drm] number of cap sets: 0 buildbot # [ 1.602063] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.602079] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.634321] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.634628] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.634652] systemd[1]: Reached target Local File Systems. buildbot # [ 1.638420] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.642222] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.644890] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.654876] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.657309] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.666384] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.685907] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.671051] systemd-modules-load[75]: Inserted module 'dm_mod' buildbot # [ 1.694142] systemd[1]: Started Journal Service. buildbot # [ 1.692205] systemd-modules-load[75]: Module 'virtio_balloon' is built in buildbot # [ 1.693320] systemd-modules-load[75]: Module 'virtio_console' is built in buildbot # [ 1.694374] systemd-modules-load[75]: Inserted module 'virtio_gpu' buildbot # [ 1.695378] systemd-modules-load[75]: Module 'virtio_rng' is built in buildbot # [ 1.704373] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.705496] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.725385] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.733242] systemd-udevd[81]: Using default interface naming scheme 'v260'. buildbot # [ 1.763227] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.824542] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.897749] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.899616] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.559550] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.560522] systemd[1]: Reached target System Initialization. buildbot # [ 2.561349] systemd[1]: Reached target Basic System. buildbot # [ 2.722103] (udev-worker)[93]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.739687] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.752858] (udev-worker)[99]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.789490] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.792128] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.796168] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.835581] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.842128] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.848229] systemd[1]: Mounting /sysroot... buildbot # [ 2.900731] EXT4-fs (vda): mounted filesystem 496e5987-86ae-4fac-8443-bda059fa8cca r/w with ordered data mode. Quota mode: none. buildbot # [ 2.884808] systemd[1]: Mounted /sysroot. buildbot # [ 2.891981] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.895669] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.928330] systemd-sysroot-fstab-check[121]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 2.935441] systemd[1]: Reload requested from client PID 121 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 2.938153] systemd[1]: Reloading... buildbot # [ 3.152683] systemd[1]: Reloading finished in 216 ms. buildbot # [ 3.169566] systemd-sysroot-fstab-check[121]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.173338] systemd-sysroot-fstab-check[121]: Requesting swap.target/start/replace... buildbot # [ 3.177729] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.179911] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.186385] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.188187] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.209597] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.210708] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.486674] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.496273] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.506647] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.523968] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.551370] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.554608] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.573154] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.583737] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.586308] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.600255] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.606651] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.630232] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.631404] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.107250] (udev-worker)[103]: mtd0ro: Failed to find and pin callout binary "/nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/mtd_probe": No such file or directory buildbot # [ 4.113418] (udev-worker)[103]: mtd0ro: /nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory buildbot # [ 4.134071] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.137963] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.139491] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 4.140677] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.156798] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.158237] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.160430] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.180594] systemd-vconsole-setup[156]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 4.183842] systemd[1]: Finished Virtual Console Setup. buildbot # [ 4.487363] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 4.522477] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 4.524875] systemd[1]: Reached target Initrd File Systems. buildbot # [ 4.528196] systemd[1]: Starting Find NixOS closure... buildbot # [ 4.536301] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 4.576244] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 4.580191] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 4.591536] systemd[1]: Finished Find NixOS closure. buildbot # [ 4.592690] systemd[1]: Reached target Initrd Default Target. buildbot # [ 4.596269] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 4.627072] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 4.628996] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 4.632828] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 4.636206] systemd[1]: Stopped target Basic System. buildbot # [ 4.637218] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 4.638673] systemd[1]: Stopped target Path Units. buildbot # [ 4.643889] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 4.645333] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 4.646601] systemd[1]: Stopped target Slice Units. buildbot # [ 4.647428] systemd[1]: Stopped target Socket Units. buildbot # [ 4.649514] systemd[1]: Stopped target System Initialization. buildbot # [ 4.652833] systemd[1]: Stopped target Swaps. buildbot # [ 4.657219] systemd[1]: Stopped target Timer Units. buildbot # [ 4.659071] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 4.660420] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 4.664140] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 4.667407] systemd[1]: Stopped Find NixOS closure. buildbot # [ 4.668900] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 4.670325] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 4.671227] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 4.679209] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 4.683175] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 4.687133] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 4.687996] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 4.690267] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 4.692948] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 4.696429] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 4.697388] systemd[1]: Stopped target Local File Systems. buildbot # [ 4.698985] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 4.700768] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 4.701878] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 4.702680] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 4.703722] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.706983] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.712177] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 4.713374] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 4.714381] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 4.715382] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 4.720218] systemd[1]: systemd-udevd.service: Consumed 1.484s CPU time over 3.061s wall clock time, 23M memory peak. buildbot # [ 4.721641] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 4.722632] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.723453] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 4.728155] systemd[1]: Closed udev Control Socket. buildbot # [ 4.728879] systemd[1]: Starting Cleanup udev Database... buildbot # [ 4.729632] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 4.730672] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 4.731550] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 4.736419] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 4.740102] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 4.741141] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 4.758505] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 4.759904] systemd[1]: Finished Cleanup udev Database. buildbot # [ 4.764337] systemd[1]: Reached target Switch Root. buildbot # [ 4.765078] systemd[1]: Starting NixOS Activation... buildbot # [ 4.897177] initrd-nixos-activation-start[181]: booting system configuration /nix/store/7ayv9fwhhdwz30cn6sj62rvhnkm5zkhv-nixos-system-buildbot-test buildbot # [ 4.948866] initrd-nixos-activation-start[181]: running activation script... buildbot # [ 5.271746] initrd-nixos-activation-start[204]: setting up /etc... buildbot # [ 5.464884] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 5.467487] systemd[1]: Finished NixOS Activation. buildbot # [ 5.468710] systemd[1]: Starting Switch Root... buildbot # [ 5.491662] systemd[1]: Switching root. buildbot # [ 5.566953] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 6.108498] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 6.115273] systemd[1]: Detected virtualization qemu. buildbot # [ 6.116904] systemd[1]: Detected architecture arm64. buildbot # [ 6.118618] systemd[1]: Detected first boot. buildbot # [ 6.123323] systemd[1]: Initializing machine ID from random generator. buildbot # [ 6.392356] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 6.546496] NET: Registered PF_VSOCK protocol family buildbot # [ 6.552798] Guest personality initialized and is inactive buildbot # [ 6.553717] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 6.553739] Initialized host personality buildbot # [ 6.612459] systemd[1]: Applying preset policy. buildbot # [ 6.993381] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 7.365958] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 7.367213] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 7.369593] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 7.372665] systemd[1]: Created slice Slice /system/getty. buildbot # [ 7.374653] systemd[1]: Created slice User and Session Slice. buildbot # [ 7.375894] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 7.377431] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 7.379287] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 7.380316] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 7.381914] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 7.383056] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 7.384168] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 7.385756] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 7.387382] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 7.389085] systemd[1]: Reached target Path Units. buildbot # [ 7.390595] systemd[1]: Reached target Remote File Systems. buildbot # [ 7.391673] systemd[1]: Reached target Slice Units. buildbot # [ 7.392751] systemd[1]: Reached target Swaps. buildbot # [ 7.395891] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 7.399879] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.402971] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.406285] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.410650] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.412971] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.416496] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.418354] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.419752] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.421482] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.429594] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.431429] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.432600] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.436668] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.440401] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.446899] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.454430] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.461864] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.478945] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.480592] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.489920] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.492583] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.498770] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.511506] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.513061] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.543646] systemd[1]: Starting Journal Service... buildbot # [ 7.563008] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.594000] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.614930] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.620557] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.619573] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.637661] systemd-journald[275]: Collecting audit messages is enabled. buildbot # [ 7.651083] fuse: init (API version 7.45) buildbot # [ 7.632749] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.658358] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.673374] systemd[1]: Started Journal Service. buildbot # [ 7.666319] systemd-modules-load[276]: Module 'atkbd' is built in buildbot # [ 7.673974] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.681757] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.688162] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.691898] systemd-modules-load[276]: Module 'loop' is built in buildbot # [ 7.696809] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.702130] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.706928] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.713693] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.716272] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.720333] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.723933] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.728670] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.730278] systemd-modules-load[276]: Inserted module 'tls' buildbot # [ 7.732154] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.757902] EXT4-fs (vda): re-mounted 496e5987-86ae-4fac-8443-bda059fa8cca. buildbot # [ 7.739395] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.747804] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.757968] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.768095] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.784883] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.789168] systemd-oomd[278]: No swap; memory pressure usage will be degraded buildbot # [ 7.805260] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.806619] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.816644] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.821568] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.832413] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.906224] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.928116] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.931102] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.932971] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.958050] systemd-journald[275]: Received client request to flush runtime journal. buildbot # [ 7.988388] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.990165] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.997336] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 8.061960] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 8.063038] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 8.065140] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 8.155175] systemd-udevd[307]: Using default interface naming scheme 'v260'. buildbot # [ 8.270380] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.348336] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.385013] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.388100] systemd[1]: Reached target Local File Systems. buildbot # [ 8.391481] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.398340] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.400697] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.402840] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.412106] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.426962] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.515731] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.525473] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.599383] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.607404] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.620624] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.708674] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.751553] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.756396] systemd[1]: Starting Update is Completed... buildbot # [ 8.821154] systemd[1]: Finished Update is Completed. buildbot # [ 9.214512] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.224284] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.499266] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.509650] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.512215] systemd[1]: Reached target System Initialization. buildbot # [ 9.517165] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.518222] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.519198] systemd[1]: Reached target Timer Units. buildbot # [ 9.519947] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.524849] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.532823] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.534097] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.534968] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.544189] systemd[1]: Reached target Socket Units. buildbot # [ 9.544968] systemd[1]: Reached target Basic System. buildbot # [ 9.545703] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.546699] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.552066] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.560832] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.584716] systemd[1]: Starting resolvconf update... buildbot # [ 9.586468] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.620138] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.661894] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.691314] nsncd[394]: Sep 27 07:29:50.342 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.700986] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.706432] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.711536] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.717538] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 9.726893] systemd[1]: Starting User Login Management... buildbot # [ 9.763134] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.796773] dbus-broker-launch[398]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.811695] dbus-broker-launch[398]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.816273] dbus-broker-launch[398]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.852120] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.899424] dbus-broker-launch[398]: Ready buildbot # [ 9.914015] systemd-logind[415]: New seat seat0. buildbot # [ 9.919337] systemd[1]: Started User Login Management. buildbot # [ 9.925536] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 9.930297] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 9.933469] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 9.937371] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 9.941272] systemd[1]: Starting linger-users.service... buildbot # [ 9.944850] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 9.949774] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 9.954183] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 9.980269] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.021237] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.026318] systemd[1]: Finished linger-users.service. buildbot # [ 10.040602] systemd[1]: Finished resolvconf update. buildbot # [ 10.041746] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.051477] systemd[1]: Starting DHCP Client... buildbot # [ 10.057451] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.059212] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.064518] nsncd[466]: Sep 27 07:29:50.711 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.070568] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.076135] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.149672] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 10.239196] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 10.249735] systemd[1]: Started backdoor.service. buildbot # [ 10.309662] dhcpcd[490]: dhcpcd-10.3.2 starting buildbot # [ 10.326747] dhcpcd[529]: dev: loaded udev buildbot # [ 10.349966] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.356946] systemd[1]: Reached target Network. buildbot # connecting to host... buildbot # [ 10.364710] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.395568] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 10.378929] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.397231] systemd[1]: Starting SSH Daemon... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 10.70 seconds) buildbot: (finished: waiting for the VM to finish booting, in 11.12 seconds) buildbot # [ 10.437471] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.613143] sshd[541]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.614024] sshd[541]: Server listening on :: port 22. buildbot # [ 10.621586] systemd[1]: Started SSH Daemon. buildbot # [ 10.654097] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.784438] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 10.774513] systemd[1]: Started Getty on tty1. buildbot # [ 10.780866] systemd[1]: Reached target Login Prompts. buildbot # [ 10.795583] postgresql-pre-start[556]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 10.825683] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 10.830086] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 10.810178] postgresql-pre-start[556]: This user must also own the server process. buildbot # [ 10.834020] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 10.834338] cfg80211: failed to load regulatory.db buildbot # [ 10.820964] postgresql-pre-start[556]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 10.822252] postgresql-pre-start[556]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 10.823551] postgresql-pre-start[556]: The default text search configuration will be set to "english". buildbot # [ 10.834503] postgresql-pre-start[556]: Data page checksums are disabled. buildbot # [ 10.840786] postgresql-pre-start[556]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 10.842097] postgresql-pre-start[556]: creating subdirectories ... ok buildbot # [ 10.842959] postgresql-pre-start[556]: selecting dynamic shared memory implementation ... posix buildbot # [ 10.848131] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.854411] dhcpcd[529]: no valid interfaces found buildbot # [ 10.859286] dhcpcd[529]: no valid interfaces found buildbot # [ 10.896878] (udev-worker)[318]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 10.952736] nginx-pre-start[559]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 10.959223] nginx-pre-start[559]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 10.973143] systemd[1]: Started Nginx Web Server. buildbot # [ 11.023305] setup-git-repo-start[570]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.031021] setup-git-repo-start[570]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.040491] setup-git-repo-start[570]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.047627] setup-git-repo-start[570]: hint: call: buildbot # [ 11.051306] setup-git-repo-start[570]: hint: buildbot # [ 11.051935] setup-git-repo-start[570]: hint: git config --global init.defaultBranch buildbot # [ 11.059599] setup-git-repo-start[570]: hint: buildbot # [ 11.063561] setup-git-repo-start[570]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.070763] setup-git-repo-start[570]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.076502] setup-git-repo-start[570]: hint: buildbot # [ 11.077190] setup-git-repo-start[570]: hint: git branch -m buildbot # [ 11.078022] setup-git-repo-start[570]: hint: buildbot # [ 11.078609] setup-git-repo-start[570]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.079994] setup-git-repo-start[570]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 11.101348] (udev-worker)[313]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 11.103549] postgresql-pre-start[556]: selecting default "max_connections" ... 100 buildbot # [ 11.113336] (udev-worker)[313]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.136423] setup-git-repo-start[583]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.137860] setup-git-repo-start[583]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.139198] setup-git-repo-start[583]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.152264] setup-git-repo-start[583]: hint: call: buildbot # [ 11.164150] setup-git-repo-start[583]: hint: buildbot # [ 11.164785] setup-git-repo-start[583]: hint: git config --global init.defaultBranch buildbot # [ 11.165872] setup-git-repo-start[583]: hint: buildbot # [ 11.166454] setup-git-repo-start[583]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.167772] setup-git-repo-start[583]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.182425] setup-git-repo-start[583]: hint: buildbot # [ 11.183106] setup-git-repo-start[583]: hint: git branch -m buildbot # [ 11.183932] setup-git-repo-start[583]: hint: buildbot # [ 11.191519] setup-git-repo-start[583]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.201401] setup-git-repo-start[583]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 11.202865] systemd-logind[415]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 11.222092] postgresql-pre-start[556]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.253642] setup-git-repo-start[589]: [master (root-commit) e41f32e] Initial commit with scheduled effects buildbot # [ 11.254991] setup-git-repo-start[589]: 3 files changed, 131 insertions(+) buildbot # [ 11.255897] setup-git-repo-start[589]: create mode 100644 effects-lib.nix buildbot # [ 11.262164] setup-git-repo-start[589]: create mode 100644 flake.lock buildbot # [ 11.265937] setup-git-repo-start[589]: create mode 100644 flake.nix buildbot # [ 11.315345] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 11.326559] systemd[1]: Starting Address configuration of eth1... buildbot # [ 11.409500] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 11.397095] dhcpcd[529]: eth0: waiting for carrier buildbot # [ 11.407881] dhcpcd[529]: eth0: carrier acquired buildbot # [ 11.414391] setup-git-repo-start[595]: To /srv/repos/test-flake.git buildbot # [ 11.415349] setup-git-repo-start[595]: * [new branch] master -> master buildbot # [ 11.424175] setup-git-repo-start[595]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.429989] dhcpcd[529]: DUID 00:01:00:01:32:4b:82:70:52:54:00:12:34:56 buildbot # [ 11.432547] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 11.435372] dhcpcd[529]: eth0: IAID 00:12:34:56 buildbot # [ 11.437331] dhcpcd[529]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 11.476072] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 11.470589] network-addresses-eth1-start[602]: adding address 192.168.1.1/24... done buildbot # [ 11.485509] network-addresses-eth1-start[602]: adding address 2001:db8:1::1/64... done buildbot # [ 11.504494] systemd[1]: Finished Address configuration of eth1. buildbot # [ 11.697749] mousedev: PS/2 mouse device common for all mice buildbot: (finished: waiting for unit sshd.service, in 12.40 seconds) buildbot: waiting for unit setup-git-repo.service buildbot # [ 11.765686] systemd-logind[415]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot: (finished: waiting for unit setup-git-repo.service, in 0.07 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 11.862318] dhcpcd[529]: eth0: soliciting a DHCP lease buildbot # [ 11.868443] dhcpcd[529]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 11.876678] dhcpcd[529]: eth0: probing address 10.0.2.15/24 buildbot # [ 12.888982] dhcpcd[529]: eth0: soliciting an IPv6 router buildbot # [ 12.890287] dhcpcd[529]: eth0: Router Advertisement from fe80::2 buildbot # [ 12.891181] dhcpcd[529]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 12.894350] dhcpcd[529]: eth0: adding route to fec0::/64 buildbot # [ 12.896466] dhcpcd[529]: eth0: adding default route via fe80::2 buildbot # [ 13.336380] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 13.421592] postgresql-pre-start[556]: selecting default time zone ... UTC buildbot # [ 13.426220] postgresql-pre-start[556]: creating configuration files ... ok buildbot # [ 13.912344] postgresql-pre-start[556]: running bootstrap script ... ok buildbot # [ 13.949844] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 13.966011] systemd[1]: Starting Virtual Console Setup... buildbot # [ 13.996103] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 13.997889] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 14.017197] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.126899] systemd-logind[415]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 14.438089] systemd-vconsole-setup[669]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 14.441918] systemd[1]: Finished Virtual Console Setup. buildbot # [ 14.715547] postgresql-pre-start[556]: performing post-bootstrap initialization ... ok buildbot # [ 14.829227] postgresql-pre-start[556]: syncing data to disk ... ok buildbot # [ 14.831324] postgresql-pre-start[556]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 14.832819] postgresql-pre-start[556]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 14.835075] postgresql-pre-start[556]: Success. You can now start the database server using: buildbot # [ 14.836358] postgresql-pre-start[556]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 14.934449] postgres[690]: [690] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 14.944747] postgres[690]: [690] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 14.945867] postgres[690]: [690] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 14.948288] postgres[690]: [690] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 14.955704] postgres[696]: [696] LOG: database system was shut down at 2026-09-27 07:29:55 GMT buildbot # [ 14.964999] postgres[690]: [690] LOG: database system is ready to accept connections buildbot # [ 14.969498] systemd[1]: Started PostgreSQL Server. buildbot # [ 14.973902] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 15.138097] postgresql-setup-start[707]: CREATE DATABASE buildbot # [ 15.180684] postgresql-setup-start[712]: CREATE ROLE buildbot # [ 15.199174] postgresql-setup-start[714]: ALTER DATABASE buildbot # [ 15.205409] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 15.207303] systemd[1]: Reached target PostgreSQL. buildbot # [ 15.211152] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 15.267175] buildbot-master-pre-start[723]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 16.625480] dhcpcd[529]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 16.625629] dhcpcd[529]: eth0: adding route to 10.0.2.0/24 buildbot # [ 16.625673] dhcpcd[529]: eth0: adding default route via 10.0.2.2 buildbot # [ 16.760426] systemd[1]: Started DHCP Client. buildbot # [ 19.616715] buildbot-master-pre-start[729]: updating existing installation buildbot # [ 19.616850] buildbot-master-pre-start[729]: not touching existing buildbot.tac buildbot # [ 19.616885] buildbot-master-pre-start[729]: creating buildbot.tac.new instead buildbot # [ 19.616916] buildbot-master-pre-start[729]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 19.616947] buildbot-master-pre-start[729]: creating database (postgresql://@/buildbot) buildbot # [ 19.616979] buildbot-master-pre-start[729]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 20.055055] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 20.064600] systemd[1]: Started Buildbot Worker.. buildbot # [ 20.066502] systemd[1]: Reached target Multi-User System. buildbot # [ 20.067381] systemd[1]: Startup finished in 946ms (kernel) + 4.690s (initrd) + 14.428s (userspace) = 20.066s. buildbot: (finished: waiting for unit multi-user.target, in 9.07 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.08 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 21.575347] twistd[820]: Starting worker local-worker-000 buildbot # [ 21.575478] twistd[820]: 2026-09-27T07:30:01+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 21.580489] twistd[820]: 2026-09-27T07:30:02+0000 [-] Loaded. buildbot # [ 21.580595] twistd[820]: 2026-09-27T07:30:02+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 21.580629] twistd[820]: 2026-09-27T07:30:02+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 21.580660] twistd[820]: 2026-09-27T07:30:02+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 21.580693] twistd[820]: 2026-09-27T07:30:02+0000 [-] recording hostname in twistd.hostname buildbot # [ 21.580724] twistd[820]: 2026-09-27T07:30:02+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 21.588815] twistd[820]: 2026-09-27T07:30:02+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.278598567906685 seconds. buildbot # [ 21.600866] twistd[820]: 2026-09-27T07:30:02+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.047815] twistd[819]: 2026-09-27T07:30:01+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 23.049977] twistd[819]: 2026-09-27T07:30:03+0000 [-] Loaded. buildbot # [ 23.050836] twistd[819]: 2026-09-27T07:30:03+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 23.053505] twistd[819]: 2026-09-27T07:30:03+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 23.055570] twistd[819]: 2026-09-27T07:30:03+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 23.063171] twistd[819]: 2026-09-27T07:30:03+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 23.701957] twistd[819]: 2026-09-27T07:30:04+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 23.797009] twistd[819]: 2026-09-27T07:30:04+0000 [-] adding 9 new builders, removing 0 buildbot # [ 23.869421] twistd[820]: 2026-09-27T07:30:04+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 23.875365] twistd[820]: 2026-09-27T07:30:04+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.4246622313381794 seconds. buildbot # [ 23.882036] twistd[820]: 2026-09-27T07:30:04+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.931654] twistd[819]: 2026-09-27T07:30:04+0000 [-] adding 3 new services, removing 0 buildbot # [ 24.145444] twistd[819]: 2026-09-27T07:30:04+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 24.158074] twistd[819]: 2026-09-27T07:30:04+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 24.178135] twistd[819]: 2026-09-27T07:30:04+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 24.390810] twistd[819]: 2026-09-27T07:30:05+0000 [-] BuildbotSite starting on 8010 buildbot # [ 24.393314] twistd[819]: 2026-09-27T07:30:05+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 24.395356] twistd[819]: 2026-09-27T07:30:05+0000 [-] adding 5 new workers, removing 0 buildbot # [ 24.408416] twistd[819]: 2026-09-27T07:30:05+0000 [-] PBServerFactory starting on 9989 buildbot # [ 24.411325] twistd[819]: 2026-09-27T07:30:05+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 24.468414] twistd[819]: 2026-09-27T07:30:05+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.470216] twistd[819]: 2026-09-27T07:30:05+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.471782] twistd[819]: 2026-09-27T07:30:05+0000 [-] message from master: attached buildbot # [ 24.475289] twistd[819]: 2026-09-27T07:30:05+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 24.486353] twistd[819]: 2026-09-27T07:30:05+0000 [-] bot attached buildbot # [ 24.488108] twistd[819]: 2026-09-27T07:30:05+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 24.491452] twistd[819]: 2026-09-27T07:30:05+0000 [-] message from master: attached buildbot # [ 24.496582] sshd-session[881]: Accepted publickey for root from ::1 port 53032 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 24.512602] twistd[819]: 2026-09-27T07:30:05+0000 [-] BuildMaster is running buildbot # [ 24.517376] sshd-session[881]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.559025] systemd[1]: Created slice Slice /user/0. buildbot # [ 24.564156] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 24.588342] systemd-logind[415]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 24.609699] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 24.615085] systemd[1]: Starting User Manager for UID 0... buildbot # [ 24.648720] (systemd)[887]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.654331] systemd-logind[415]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 24.936941] systemd[887]: Queued start job for default target Main User Target. buildbot # [ 24.945612] systemd[887]: Created slice User Application Slice. buildbot # [ 24.946568] systemd[887]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 24.947716] systemd[887]: Reached target Paths. buildbot # [ 24.949561] systemd[887]: Reached target Timers. buildbot # [ 24.952062] systemd[887]: Starting D-Bus User Message Bus Socket... buildbot # [ 24.954276] systemd[887]: Starting Create User Files and Directories... buildbot # [ 25.039639] systemd[887]: Finished Create User Files and Directories. buildbot # [ 25.080616] systemd[887]: Listening on D-Bus User Message Bus Socket. buildbot # [ 25.081652] systemd[887]: Reached target Sockets. buildbot # [ 25.085084] systemd[887]: Reached target Basic System. buildbot # [ 25.085935] systemd[887]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 25.087440] systemd[887]: Reached target Main User Target. buildbot # [ 25.088845] systemd[887]: Startup finished in 408ms. buildbot # [ 25.089605] systemd[1]: Started User Manager for UID 0. buildbot # [ 25.092863] systemd[1]: Started Session 1 of User root. buildbot # [ 25.120702] sshd-session[899]: Received disconnect from ::1 port 53032:11: disconnected by user buildbot # [ 25.122593] sshd-session[899]: Disconnected from user root ::1 port 53032 buildbot # [ 25.125801] sshd-session[881]: pam_unix(sshd:session): session closed for user root buildbot # [ 25.130301] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 25.131275] systemd-logind[415]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 25.140987] systemd-logind[415]: Removed session 1. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.26 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 25.311555] sshd-session[904]: Accepted publickey for root from ::1 port 53048 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 25.323499] sshd-session[904]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 25.335449] systemd-logind[415]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 25.341914] systemd[1]: Started Session 3 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot # [ 25.396648] sshd-session[915]: Received disconnect from ::1 port 53048:11: disconnected by user buildbot # [ 25.402098] sshd-session[915]: Disconnected from user root ::1 port 53048 buildbot # [ 25.405583] sshd-session[904]: pam_unix(sshd:session): session closed for user root buildbot # [ 25.412764] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 25.413693] systemd-logind[415]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 25.414767] systemd-logind[415]: Removed session 3. buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.14 seconds) (finished: subtest: Master and worker services start, in 4.57 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 25.453330] twistd[819]: 2026-09-27T07:30:06+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 14855 0 0100 266 100 266 0 0 13062 0 0100 266 100 266 0 0 11653 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.10 seconds) (finished: subtest: Project is registered, in 0.10 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.32 seconds) (finished: subtest: CLI list-schedules works, in 0.32 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # e41f32e..d34ffb0 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.09 seconds) (finished: subtest: Push a new commit to trigger build, in 0.09 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3871 0 0100 51 100 51 0 0 3240 0 0100 51 100 51 0 0 2810 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.05 seconds) buildbot # [ 26.304315] twistd[820]: 2026-09-27T07:30:06+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.314111] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=44130) buildbot # [ 26.319586] twistd[820]: 2026-09-27T07:30:06+0000 [Broker,client] message from master: attached buildbot # [ 26.326392] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 26.338547] twistd[819]: 2026-09-27T07:30:06+0000 [-] bot attached buildbot # [ 26.345376] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 26.347975] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 26.361208] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 26.363490] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 26.397313] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 26.399018] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 26.441222] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 26.442817] twistd[819]: 2026-09-27T07:30:06+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 26.461078] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.473327] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.474500] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.475632] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.494153] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.495349] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.504249] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.508250] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] message from master: attached buildbot # [ 26.509428] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 26.510687] twistd[820]: 2026-09-27T07:30:07+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3110 0 0100 51 100 51 0 0 2391 0 0100 51 100 51 0 0 2043 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5006 0 0100 51 100 51 0 0 3509 0 0100 51 100 51 0 0 2773 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4790 0 0100 51 100 51 0 0 3492 0 0100 51 100 51 0 0 2770 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5006 0 0100 51 100 51 0 0 3531 0 0100 51 100 51 0 0 2806 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4973 0 0100 51 100 51 0 0 3604 0 0100 51 100 51 0 0 2847 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4839 0 0100 51 100 51 0 0 3533 0 0100 51 100 51 0 0 2797 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5265 0 0100 51 100 51 0 0 3756 0 0100 51 100 51 0 0 2935 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot # [ 34.368936] sshd-session[995]: Accepted publickey for root from ::1 port 44740 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.382203] sshd-session[995]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.392780] systemd-logind[415]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.401423] systemd[1]: Started Session 4 of User root. buildbot # [ 34.433849] sshd-session[998]: Received disconnect from ::1 port 44740:11: disconnected by user buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 34.446337] sshd-session[998]: Disconnected from user root ::1 port 44740 buildbot # [ 34.447534] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 34.456269] sshd-session[995]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.457507] systemd-logind[415]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 34.458785] systemd-logind[415]: Removed session 4. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1774 0 0100 51 100 51 0 0 1634 0 0100 51 100 51 0 0 1363 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 34.620851] sshd-session[1006]: Accepted publickey for root from ::1 port 44752 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.633139] sshd-session[1006]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.644105] systemd-logind[415]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.648977] systemd[1]: Started Session 5 of User root. buildbot # [ 34.688489] sshd-session[1009]: Received disconnect from ::1 port 44752:11: disconnected by user buildbot # [ 34.694202] sshd-session[1009]: Disconnected from user root ::1 port 44752 buildbot # [ 34.695500] sshd-session[1006]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.702709] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 34.703730] systemd-logind[415]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 34.705476] systemd-logind[415]: Removed session 5. buildbot # [ 34.718252] twistd[819]: 2026-09-27T07:30:15+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 34.752061] twistd[819]: 2026-09-27T07:30:15+0000 [-] gitpoller: processing 1 changes: ['d34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 34.852080] twistd[819]: 2026-09-27T07:30:15+0000 [-] added change with revision d34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2811 0 0100 51 100 51 0 0 2324 0 0100 51 100 51 0 0 1999 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4538 0 0100 51 100 51 0 0 3263 0 0100 51 100 51 0 0 2625 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5245 0 0100 51 100 51 0 0 3746 0 0100 51 100 51 0 0 2929 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5460 0 0100 51 100 51 0 0 3874 0 0100 51 100 51 0 0 2953 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3192 0 0100 51 100 51 0 0 2229 0 0100 51 100 51 0 0 1856 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot # [ 39.918027] twistd[819]: 2026-09-27T07:30:20+0000 [-] added buildset 1 to database buildbot # [ 40.056904] twistd[819]: 2026-09-27T07:30:20+0000 [-] starting build using worker buildbot # [ 40.064090] twistd[819]: 2026-09-27T07:30:20+0000 [-] .startBuild buildbot # [ 40.131503] twistd[819]: 2026-09-27T07:30:20+0000 [-] acquireLocks(worker , locks []) buildbot # [ 40.136482] twistd[819]: 2026-09-27T07:30:20+0000 [-] starting build .. pinging the worker buildbot # [ 40.139377] twistd[819]: 2026-09-27T07:30:20+0000 [-] sending ping buildbot # [ 40.144443] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] message from master: ping buildbot # [ 40.145644] twistd[819]: 2026-09-27T07:30:20+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 40.165671] twistd[819]: 2026-09-27T07:30:20+0000 [-] : RemoteCommand.run [0] buildbot # [ 40.167211] twistd[819]: 2026-09-27T07:30:20+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 40.176197] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 40.177440] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 40.178962] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 40.184775] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.187249] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 40.189188] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 40.192889] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 40.199623] twistd[820]: 2026-09-27T07:30:20+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.027457 buildbot # [ 40.201716] twistd[820]: 2026-09-27T07:30:20+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 40.231045] twistd[819]: 2026-09-27T07:30:20+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.263980] twistd[819]: 2026-09-27T07:30:20+0000 [-] : RemoteCommand.run [1] buildbot # [ 40.273329] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 40.274800] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 40.282261] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 40.286111] twistd[819]: 2026-09-27T07:30:20+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 40.294052] twistd[819]: 2026-09-27T07:30:20+0000 [-] : RemoteCommand.run [2] buildbot # [ 40.321236] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 40.322920] twistd[820]: 2026-09-27T07:30:20+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 40.329409] twistd[819]: 2026-09-27T07:30:20+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.334902] twistd[819]: 2026-09-27T07:30:20+0000 [-] : RemoteCommand.run [3] buildbot # [ 40.368874] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 40.374448] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 40.382176] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.388817] twistd[819]: 2026-09-27T07:30:21+0000 [-] : RemoteCommand.run [4] buildbot # [ 40.421354] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 40.423386] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 40.431394] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.438453] twistd[819]: 2026-09-27T07:30:21+0000 [-] No git repo present, making full clone buildbot # [ 40.440731] twistd[819]: 2026-09-27T07:30:21+0000 [-] : RemoteCommand.run [5] buildbot # [ 40.446864] twistd[819]: 2026-09-27T07:30:21+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 40.473274] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 40.478628] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 40.492195] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 40.513579] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.521220] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 40.527608] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 40.537689] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 40.728629] sshd-session[1044]: Accepted publickey for root from ::1 port 44768 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 40.748181] sshd-session[1044]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 40.759088] systemd-logind[415]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 40.766526] systemd[1]: Started Session 6 of User root. buildbot # [ 40.814907] sshd-session[1047]: Received disconnect from ::1 port 44768:11: disconnected by user buildbot # [ 40.817913] sshd-session[1047]: Disconnected from user root ::1 port 44768 buildbot # [ 40.819793] sshd-session[1044]: pam_unix(sshd:session): session closed for user root buildbot # [ 40.823694] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 40.827834] systemd-logind[415]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 40.830505] systemd-logind[415]: Removed session 6. buildbot # [ 40.840253] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.363225 buildbot # [ 40.850051] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 40.852591] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.873149] twistd[819]: 2026-09-27T07:30:21+0000 [-] : RemoteCommand.run [6] buildbot # [ 40.877410] twistd[819]: 2026-09-27T07:30:21+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']' in dir 'build' buildbot # [ 40.888917] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 40.892640] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): RunProcess._startCommand buildbot # [ 40.901315] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f d34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f buildbot # [ 40.906860] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 40.911679] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): watching logfiles {} buildbot # [ 40.917519] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f'] buildbot # [ 40.926843] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): using PTY: False buildbot # [ 40.944318] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f']): command finished with signal None, exit code 0, elapsedTime: 0.052471 buildbot # [ 40.953254] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 40.962484] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 41.008470] twistd[819]: 2026-09-27T07:30:21+0000 [-] : RemoteCommand.run [7] buildbot # [ 41.011763] twistd[819]: 2026-09-27T07:30:21+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # 100 401 100 401 0 0 14654 0 0100 401 100 401 0 0 11661 0 0100 401 100 401 0 [ 41.029357] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 7): startCommand:shell buildbot # 0 10904 0 0 buildbot # [ 41.034297] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 41.039756] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 41.045519] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.051511] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 41.056292] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 41.062396] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 41.147783] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.129140 buildbot # [ 41.154452] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 41.158258] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.174365] twistd[819]: 2026-09-27T07:30:21+0000 [-] : RemoteCommand.run [8] buildbot # [ 41.175979] twistd[819]: 2026-09-27T07:30:21+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 41.188863] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 41.192988] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 41.194611] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 41.200379] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.202698] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 41.204296] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 41.206265] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 41.214467] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.022615 buildbot # [ 41.216613] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 41.241791] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.261575] twistd[819]: 2026-09-27T07:30:21+0000 [-] Got Git revision d34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f buildbot # [ 41.263052] twistd[819]: 2026-09-27T07:30:21+0000 [-] : RemoteCommand.run [9] buildbot # [ 41.290385] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 41.291772] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 41.299286] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 41.302568] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 41.305924] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 41.308625] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 41.312123] twistd[820]: 2026-09-27T07:30:21+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 41.321104] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.030922 buildbot # [ 41.323893] twistd[820]: 2026-09-27T07:30:21+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 41.341700] twistd[819]: 2026-09-27T07:30:21+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.362227] twistd[819]: 2026-09-27T07:30:22+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 41.385924] twistd[819]: 2026-09-27T07:30:22+0000 [-] step 'git' complete: success (None) buildbot # [ 41.395819] twistd[819]: 2026-09-27T07:30:22+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 41.413369] twistd[819]: 2026-09-27T07:30:22+0000 [-] : RemoteCommand.run [10] buildbot # [ 41.415459] twistd[819]: 2026-09-27T07:30:22+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 41.425087] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 41.426328] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 41.428567] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 41.431336] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.434607] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 41.436960] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 41.439946] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 41.452090] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.032511 buildbot # [ 41.454548] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 41.469665] twistd[819]: 2026-09-27T07:30:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.474944] twistd[819]: 2026-09-27T07:30:22+0000 [-] : RemoteCommand.run [11] buildbot # [ 41.479819] twistd[819]: 2026-09-27T07:30:22+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 41.513329] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 41.517060] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 41.527701] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 41.536652] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.543080] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 41.548791] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 41.558103] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 41.656680] systemd[1]: Started Nix Daemon. buildbot # [ 41.733509] nix-daemon[1093]: accepted connection from pid 1092, user buildbot-worker buildbot # [ 41.758689] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.240577 buildbot # [ 41.766901] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 41.770747] twistd[819]: 2026-09-27T07:30:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.793819] twistd[819]: 2026-09-27T07:30:22+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 41.812370] twistd[819]: 2026-09-27T07:30:22+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 41.836986] twistd[819]: 2026-09-27T07:30:22+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 41.847969] twistd[819]: 2026-09-27T07:30:22+0000 [-] step 'build flake' complete: success (None) buildbot # [ 41.861917] twistd[819]: 2026-09-27T07:30:22+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xf68aef3c0c20>, hideStepIf=. at 0xf68aef3c0cc0>)): [] buildbot # [ 41.870946] twistd[819]: 2026-09-27T07:30:22+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 41.886777] twistd[819]: 2026-09-27T07:30:22+0000 [-] : RemoteCommand.run [12] buildbot # [ 41.894181] twistd[819]: 2026-09-27T07:30:22+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 41.897067] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 41.898493] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 41.903047] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 41.906240] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.909739] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 41.912365] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 41.915820] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 41.921338] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.035340 buildbot # [ 41.924047] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 41.937640] twistd[819]: 2026-09-27T07:30:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.962283] twistd[819]: 2026-09-27T07:30:22+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 41.970754] twistd[819]: 2026-09-27T07:30:22+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 41.983296] twistd[819]: 2026-09-27T07:30:22+0000 [-] : RemoteCommand.run [13] buildbot # [ 41.992339] twistd[819]: 2026-09-27T07:30:22+0000 [-] command '['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 41.994749] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 41.995894] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 42.001723] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev d34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f --branch master --repo test-flake buildbot # [ 42.005607] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.009348] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 42.011941] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.017220] twistd[820]: 2026-09-27T07:30:22+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 19893 0 0100 401 100 401 0 0 17754 0 0100 401 100 401 0 0 13493 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot # [ 42.291531] nix-daemon[1093]: accepted connection from pid 1105, user buildbot-worker buildbot # [ 42.324374] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.334993 buildbot # [ 42.327374] twistd[820]: 2026-09-27T07:30:22+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 42.333889] twistd[819]: 2026-09-27T07:30:22+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.364389] twistd[819]: 2026-09-27T07:30:23+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xf68aef3c1440>, logEnviron=False)): [] buildbot # [ 42.375645] twistd[819]: 2026-09-27T07:30:23+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 42.389977] twistd[819]: 2026-09-27T07:30:23+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 42.506464] twistd[819]: 2026-09-27T07:30:23+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 42.523712] twistd[819]: 2026-09-27T07:30:23+0000 [-] : RemoteCommand.run [14] buildbot # [ 42.532136] twistd[819]: 2026-09-27T07:30:23+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 42.534653] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 42.535814] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 42.540103] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev d34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f --branch master --repo test-flake buildbot # [ 42.544071] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.547699] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 42.553184] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.557761] twistd[820]: 2026-09-27T07:30:23+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 42.779058] nix-daemon[1093]: accepted connection from pid 1114, user buildbot-worker buildbot # [ 42.813320] twistd[820]: 2026-09-27T07:30:23+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'd34ffb0ff60c51b3d22ef108eaf7ef8daa00a63f', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.291215 buildbot # [ 42.821739] twistd[820]: 2026-09-27T07:30:23+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 42.825111] twistd[819]: 2026-09-27T07:30:23+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.861439] twistd[819]: 2026-09-27T07:30:23+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xf68aef3c1620>, hideStepIf=. at 0xf68aef3c16c0>, logEnviron=False)): [] buildbot # [ 42.875881] twistd[819]: 2026-09-27T07:30:23+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 42.877904] twistd[819]: 2026-09-27T07:30:23+0000 [-] : build finished buildbot # [ 42.900074] twistd[819]: 2026-09-27T07:30:23+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 19214 0 0100 411 100 411 0 0 16432 0 0100 411 100 411 0 0 14555 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.31 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) (finished: subtest: Schedule cache is created, in 0.05 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 45450 0 0100 3793 100 3793 0 0 44126 0 0100 3793 100 3793 0 0 42238 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds) buildbot # [ 44.369891] sshd-session[1152]: Accepted publickey for root from ::1 port 60916 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.382484] sshd-session[1152]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.395227] systemd-logind[415]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # [ 44.400871] systemd[1]: Started Session 7 of User root. buildbot # [ 44.448559] sshd-session[1157]: Received disconnect from ::1 port 60916:11: disconnected by user buildbot # [ 44.451329] sshd-session[1157]: Disconnected from user root ::1 port 60916 buildbot # [ 44.460903] sshd-session[1152]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.462284] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 44.463422] systemd-logind[415]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 44.477234] systemd-logind[415]: Removed session 7. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 36467 0 0100 3793 100 3793 0 0 33856 0 0100 3793 100 3793 0 0 32190 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds) buildbot # [ 44.745963] sshd-session[1171]: Accepted publickey for root from ::1 port 60922 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.758825] sshd-session[1171]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.771468] systemd-logind[415]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.776519] systemd[1]: Started Session 8 of User root. buildbot # [ 44.816512] sshd-session[1174]: Received disconnect from ::1 port 60922:11: disconnected by user buildbot # [ 44.819595] sshd-session[1174]: Disconnected from user root ::1 port 60922 buildbot # [ 44.822368] sshd-session[1171]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.825469] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 44.830032] systemd-logind[415]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 44.835770] systemd-logind[415]: Removed session 8. buildbot # [ 44.838917] twistd[819]: 2026-09-27T07:30:25+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39404 0 0100 3793 100 3793 0 0 38367 0 0100 3793 100 3793 0 0 37381 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 40024 0 0100 3793 100 3793 0 0 38931 0 0100 3793 100 3793 0 0 38000 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot # [ 47.855863] twistd[819]: 2026-09-27T07:30:28+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 47.859229] twistd[819]: 2026-09-27T07:30:28+0000 [-] beginning configuration update buildbot # [ 47.862441] twistd[819]: 2026-09-27T07:30:28+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # [ 47.894207] twistd[819]: 2026-09-27T07:30:28+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 47.916116] twistd[819]: 2026-09-27T07:30:28+0000 [-] adding 1 new schedulers, removing 0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0[ 48.102329] twistd[819]: 2026-09-27T07:30:28+0000 [-] configuration update complete (took 0.240 seconds) buildbot # 0 0 0 0 0 0100 4079 100 4079 0 0 36019 0 0100 4079 100 4079 0 0 35033 0 0100 4079 100 4079 0 0 34313 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.30 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 44943 0 0100 4079 100 4079 0 0 43771 0 0100 4079 100 4079 0 0 42581 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds) (finished: subtest: Nightly schedulers are created, in 5.07 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 173.2k 0 0100 2371 100 2371 0 0 142.9k 0 0100 2371 100 2371 0 0 123.9k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.05 seconds) (finished: subtest: Scheduled effect builder exists, in 0.05 seconds) (finished: run the VM test script, in 49.10 seconds) test script finished in 49.14s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.21 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh