tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 12) buildbot # Formatting '/build/vm-state-buildbot/tmp.1pGDcIBuB5', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 73f4feb7-b222-4b97-8120-6f2e05acf4d1 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/l0j36gv945jw40zb0785429253w2xr7b-nixos-system-buildbot-test/init regInfo=/nix/store/4v79h795adpkrkmk8idii0yj7x494y7k-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/4v79h795adpkrkmk8idii0yj7x494y7k-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000029] arm-pv: using stolen time PV buildbot # [ 0.000362] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000537] Console: colour dummy device 80x25 buildbot # [ 0.000544] printk: legacy console [tty0] enabled buildbot # [ 0.000741] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000748] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000832] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000953] landlock: Up and running. buildbot # [ 0.000956] Yama: becoming mindful. buildbot # [ 0.001366] LSM support for eBPF active buildbot # [ 0.001539] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001561] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002650] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003395] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003399] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004600] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004688] EFI services will not be available. buildbot # [ 0.004773] smp: Bringing up secondary CPUs ... buildbot # [ 0.004780] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004783] SMP: Total of 1 processors activated. buildbot # [ 0.004786] CPU: All CPU(s) started at EL1 buildbot # [ 0.004797] CPU features: detected: Branch Target Identification buildbot # [ 0.004802] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004807] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004811] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004814] CPU features: detected: Common not Private translations buildbot # [ 0.004817] CPU features: detected: CRC32 instructions buildbot # [ 0.004820] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004824] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004827] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004830] CPU features: detected: E0PD buildbot # [ 0.004832] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004835] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004839] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004842] CPU features: detected: Fine Grained Traps buildbot # [ 0.004845] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004850] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004853] CPU features: detected: LSE atomic instructions buildbot # [ 0.004856] CPU features: detected: Privileged Access Never buildbot # [ 0.004858] CPU features: detected: PMUv3 buildbot # [ 0.004861] CPU features: detected: RAS Extension Support buildbot # [ 0.004864] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004866] CPU features: detected: Random Number Generator buildbot # [ 0.004869] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004872] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004875] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004879] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004915] alternatives: applying system-wide alternatives buildbot # [ 0.007773] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007994] Memory: 895076K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008294] devtmpfs: initialized buildbot # [ 0.009965] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009990] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.010009] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.010179] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.010184] 0 pages in range for non-PLT usage buildbot # [ 0.010185] 508320 pages in range for PLT usage buildbot # [ 0.010313] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.011066] DMI not present or invalid. buildbot # [ 0.014142] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016341] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016489] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016646] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016665] audit: initializing netlink subsys (disabled) buildbot # [ 0.017185] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.017188] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.017191] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.017194] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.017197] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017221] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017231] cpuidle: using governor ladder buildbot # [ 0.017236] cpuidle: using governor menu buildbot # [ 0.017421] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017436] ASID allocator initialised with 65536 entries buildbot # [ 0.018879] Serial: AMBA PL011 UART driver buildbot # [ 0.023994] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.024167] printk: console [ttyAMA0] enabled buildbot # [ 0.150765] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.150779] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.150784] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.150789] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.150793] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.150797] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.150802] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.150806] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.158465] fbcon: Taking over console buildbot # [ 0.158480] ACPI: Interpreter disabled. buildbot # [ 0.160367] iommu: Default domain type: Translated buildbot # [ 0.160377] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.167487] SCSI subsystem initialized buildbot # [ 0.168191] usbcore: registered new interface driver usbfs buildbot # [ 0.168229] usbcore: registered new interface driver hub buildbot # [ 0.168247] usbcore: registered new device driver usb buildbot # [ 0.168495] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.168502] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.168512] PTP clock support registered buildbot # [ 0.168566] EDAC MC: Ver: 3.0.0 buildbot # [ 0.173412] scmi_core: SCMI protocol bus registered buildbot # [ 0.174418] FPGA manager framework buildbot # [ 0.175331] vgaarb: loaded buildbot # [ 0.175956] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.176404] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.176436] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.178972] netfs: FS-Cache loaded buildbot # [ 0.179092] pnp: PnP ACPI: disabled buildbot # [ 0.186646] NET: Registered PF_INET protocol family buildbot # [ 0.186812] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.216142] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.216176] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.216198] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.216243] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.216319] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.216420] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.216476] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.216524] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.216595] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.216614] NET: Registered PF_XDP protocol family buildbot # [ 0.216631] PCI: CLS 0 bytes, default 64 buildbot # [ 0.216844] Trying to unpack rootfs image as initramfs... buildbot # [ 0.233808] kvm [1]: HYP mode not available buildbot # [ 0.324357] Initialise system trusted keyrings buildbot # [ 0.325050] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.326317] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.327099] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.347777] Key type asymmetric registered buildbot # [ 0.347790] Asymmetric key parser 'x509' registered buildbot # [ 0.347833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.356040] io scheduler mq-deadline registered buildbot # [ 0.356056] io scheduler kyber registered buildbot # [ 0.364112] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.365445] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.365830] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.365847] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.365859] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.365868] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.365889] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.365911] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.365977] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.365987] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.365993] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.366000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.366005] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.366091] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.366536] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.366775] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.366793] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.366823] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.366839] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.367300] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.367487] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.367503] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.367533] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.396044] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.396248] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.396266] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.396296] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.396785] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.396973] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.396990] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.397020] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.397498] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.397689] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.397705] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.397735] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.398193] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.398381] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.398397] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.398428] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.398882] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.399070] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.399085] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.399115] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.399132] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.399627] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.399819] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.399849] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.400323] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.400515] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.400545] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.400935] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.401129] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.401383] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.401650] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.401668] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.401698] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.402158] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.402346] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.402362] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.402392] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.402971] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.402983] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.402990] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.403034] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.403081] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.403129] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.403176] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.403224] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.403271] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.403319] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.403366] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.403414] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.403474] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.403521] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.403544] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.403566] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.403588] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.403611] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.403633] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.403658] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.403680] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.403702] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.403725] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.403747] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.403770] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.403792] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.403814] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.403836] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.403858] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.403880] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.403902] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.403924] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.403946] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.463678] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.463709] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.463720] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.463724] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.468056] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.494144] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.500172] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.502209] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.512143] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.514167] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.516083] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.518030] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.536138] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.538200] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.539934] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.542085] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.554670] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.561145] msm_serial: driver initialized buildbot # [ 0.561288] SuperH (H)SCI(F) driver initialized buildbot # [ 0.561342] STM32 USART driver initialized buildbot # [ 0.592522] loop: module loaded buildbot # [ 0.592688] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.593456] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.600497] megasas: 07.734.00.00-rc1 buildbot # [ 0.601144] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.602924] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.602975] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.616592] Using buffer write method buildbot # [ 0.616676] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.618560] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.618586] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.620106] Using buffer write method buildbot # [ 0.620129] Concatenating MTD devices: buildbot # [ 0.620133] (0): "0.flash" buildbot # [ 0.620137] (1): "0.flash" buildbot # [ 0.620141] into device "0.flash" buildbot # [ 0.836151] Freeing initrd memory: 25516K buildbot # [ 0.842194] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.845981] thunder_xcv, ver 1.0 buildbot # [ 0.846021] thunder_bgx, ver 1.0 buildbot # [ 0.846044] nicpf, ver 1.0 buildbot # [ 0.846587] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.846595] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.846628] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.846636] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.846666] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.846673] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.846697] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.846703] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.846835] sky2: driver version 1.30 buildbot # [ 0.855854] usbcore: registered new interface driver usb-storage buildbot # [ 0.855908] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.855924] usbserial: USB Serial support registered for generic buildbot # [ 0.858982] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.859012] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.859178] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.862329] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.863907] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.863933] rtc-pl031 9010000.pl031: setting system clock to 2026-10-04T07:41:49 UTC (1791099709) buildbot # [ 0.866089] i2c_dev: i2c /dev entries driver buildbot # [ 0.869274] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.869284] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.869569] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.869932] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.871574] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.871815] usbcore: registered new interface driver usbhid buildbot # [ 0.871822] usbhid: USB HID core driver buildbot # [ 0.876601] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.876903] hub 1-0:1.0: USB hub found buildbot # [ 0.878134] hub 1-0:1.0: 6 ports detected buildbot # [ 0.905852] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.907425] drop_monitor: Initializing network drop monitor service buildbot # [ 0.907569] NET: Registered PF_INET6 protocol family buildbot # [ 0.910767] Segment Routing with IPv6 buildbot # [ 0.910790] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.910831] NET: Registered PF_PACKET protocol family buildbot # [ 0.912570] 9pnet: Installing 9P2000 support buildbot # [ 0.914708] Key type dns_resolver registered buildbot # [ 0.921613] registered taskstats version 1 buildbot # [ 0.921764] Loading compiled-in X.509 certificates buildbot # [ 0.930361] Demotion targets for Node 0: null buildbot # [ 0.930478] Key type .fscrypt registered buildbot # [ 0.930485] Key type fscrypt-provisioning registered buildbot # [ 0.930577] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.930596] ima: Allocated hash algorithm: sha1 buildbot # [ 0.930623] ima: No architecture policies found buildbot # [ 0.934827] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.953143] clk: Disabling unused clocks buildbot # [ 0.953166] PM: genpd: Disabling unused power domains buildbot # [ 0.957599] Freeing unused kernel memory: 4736K buildbot # [ 0.957782] Run /init as init process buildbot # [ 0.974174] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.128001] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.275606] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.308905] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.315163] systemd[1]: Detected virtualization qemu. buildbot # [ 1.316269] systemd[1]: Detected architecture arm64. buildbot # [ 1.317271] systemd[1]: Running in initrd. buildbot # [ 1.318641] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.320162] systemd[1]: Hostname set to . buildbot # [ 1.356273] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.410292] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.417958] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.419030] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.420450] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.421403] systemd[1]: Reached target Path Units. buildbot # [ 1.422164] systemd[1]: Reached target Slice Units. buildbot # [ 1.422908] systemd[1]: Reached target Swaps. buildbot # [ 1.423574] systemd[1]: Reached target Timer Units. buildbot # [ 1.424510] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.425664] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.426702] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.427582] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.428526] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.428550] systemd[1]: Reached target Socket Units. buildbot # [ 1.431351] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.439799] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.440916] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.447566] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.455543] systemd[1]: Starting Journal Service... buildbot # [ 1.473873] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.475244] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.476062] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.480448] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.495028] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.496988] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.502135] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.508216] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.508564] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.512282] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.537965] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.559836] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.564579] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.568300] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.574779] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.575050] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.575060] [drm] features: -context_init buildbot # [ 1.575761] [drm] number of scanouts: 1 buildbot # [ 1.575779] [drm] number of cap sets: 0 buildbot # [ 1.589076] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.589092] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.616620] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.617658] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.618611] systemd[1]: Reached target Local File Systems. buildbot # [ 1.624796] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.626141] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.639696] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.641869] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.649183] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.657535] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.660148] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.708520] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.720249] systemd[1]: Started Journal Service. buildbot # [ 1.712340] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.713613] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.725216] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.726345] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.727352] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.732912] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.740533] systemd-udevd[80]: Using default interface naming scheme 'v260'. buildbot # [ 1.754454] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.780108] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.852129] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.921599] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.923441] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.600324] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.601269] systemd[1]: Reached target System Initialization. buildbot # [ 2.604137] systemd[1]: Reached target Basic System. buildbot # [ 2.763930] (udev-worker)[100]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.785360] (udev-worker)[103]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.792195] (udev-worker)[103]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.835257] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.837837] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.844157] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.888419] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.898483] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.906449] systemd[1]: Mounting /sysroot... buildbot # [ 2.955269] EXT4-fs (vda): mounted filesystem 73f4feb7-b222-4b97-8120-6f2e05acf4d1 r/w with ordered data mode. Quota mode: none. buildbot # [ 2.945775] systemd[1]: Mounted /sysroot. buildbot # [ 2.947575] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.955471] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.975853] systemd-sysroot-fstab-check[121]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 2.981967] systemd[1]: Reload requested from client PID 121 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 2.988129] systemd[1]: Reloading... buildbot # [ 3.216664] systemd[1]: Reloading finished in 231 ms. buildbot # [ 3.235203] systemd-sysroot-fstab-check[121]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.239959] systemd-sysroot-fstab-check[121]: Requesting swap.target/start/replace... buildbot # [ 3.244608] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.251133] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.255167] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.257350] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.273574] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.275114] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.467095] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.479323] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.493998] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.514897] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.535136] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.543095] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.551066] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.561442] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.583382] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.586854] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.593623] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.615101] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.616616] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.621999] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.656642] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.657743] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.660189] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.670569] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.705969] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.720223] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.721713] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.730689] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.754614] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.760173] systemd[1]: Stopped target Basic System. buildbot # [ 3.761240] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.763247] systemd[1]: Stopped target Path Units. buildbot # [ 3.766239] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.771790] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.774249] systemd[1]: Stopped target Slice Units. buildbot # [ 3.776125] systemd[1]: Stopped target Socket Units. buildbot # [ 3.777449] systemd[1]: Stopped target System Initialization. buildbot # [ 3.780631] systemd[1]: Stopped target Swaps. buildbot # [ 3.785314] systemd[1]: Stopped target Timer Units. buildbot # [ 3.786153] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.788118] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.790348] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.795950] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.798094] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.800103] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.803709] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.812375] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.813234] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.814368] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.815127] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.827865] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.830359] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.836373] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.838194] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.839448] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.843680] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.845157] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.845976] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.848257] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.850502] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.852274] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.854954] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.855896] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.857032] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.857958] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.858968] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.863987] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.865847] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.868212] systemd[1]: systemd-udevd.service: Consumed 1.031s CPU time over 2.253s wall clock time, 16.3M memory peak. buildbot # [ 3.871828] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.873928] systemd[1]: Closed udev Control Socket. buildbot # [ 3.874748] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.875546] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.876714] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.877621] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.878757] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.879753] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.882882] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.907425] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.910509] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.911516] systemd[1]: Reached target Switch Root. buildbot # [ 3.915958] systemd[1]: Starting NixOS Activation... buildbot # [ 4.040293] initrd-nixos-activation-start[173]: booting system configuration /nix/store/l0j36gv945jw40zb0785429253w2xr7b-nixos-system-buildbot-test buildbot # [ 4.090923] initrd-nixos-activation-start[173]: running activation script... buildbot # [ 4.422994] initrd-nixos-activation-start[196]: setting up /etc... buildbot # [ 4.631825] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.634886] systemd[1]: Finished NixOS Activation. buildbot # [ 4.640363] systemd[1]: Starting Switch Root... buildbot # [ 4.659265] systemd[1]: Switching root. buildbot # [ 4.712461] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 5.248020] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.254558] systemd[1]: Detected virtualization qemu. buildbot # [ 5.256602] systemd[1]: Detected architecture arm64. buildbot # [ 5.258275] systemd[1]: Detected first boot. buildbot # [ 5.265017] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.625581] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 5.789247] NET: Registered PF_VSOCK protocol family buildbot # [ 5.796028] Guest personality initialized and is inactive buildbot # [ 5.797737] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 5.797808] Initialized host personality buildbot # [ 5.850189] systemd[1]: Applying preset policy. buildbot # [ 6.236647] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 6.613280] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 6.614733] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 6.619235] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 6.622425] systemd[1]: Created slice Slice /system/getty. buildbot # [ 6.625194] systemd[1]: Created slice User and Session Slice. buildbot # [ 6.627203] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 6.629531] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 6.631530] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 6.633220] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 6.634945] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 6.636826] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 6.638516] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 6.640294] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 6.642101] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 6.643921] systemd[1]: Reached target Path Units. buildbot # [ 6.645603] systemd[1]: Reached target Remote File Systems. buildbot # [ 6.647279] systemd[1]: Reached target Slice Units. buildbot # [ 6.648923] systemd[1]: Reached target Swaps. buildbot # [ 6.652359] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 6.656651] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 6.659868] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 6.663291] systemd[1]: Listening on Factory Reset Management. buildbot # [ 6.667852] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 6.670381] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 6.674553] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 6.677088] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 6.678461] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.680275] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.687777] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 6.689672] systemd[1]: Listening on udev Control Socket. buildbot # [ 6.691307] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 6.695552] systemd[1]: Mounting Huge Pages File System... buildbot # [ 6.699799] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 6.706409] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 6.715115] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 6.724690] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 6.740956] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 6.742195] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 6.754122] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 6.756533] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 6.761993] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 6.771845] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 6.774321] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 6.829177] systemd[1]: Starting Journal Service... buildbot # [ 6.850575] systemd[1]: Starting Load Kernel Modules... buildbot # [ 6.890650] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 6.913921] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 6.916276] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.933045] fuse: init (API version 7.45) buildbot # [ 6.935678] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 6.943193] systemd-journald[268]: Collecting audit messages is enabled. buildbot # [ 6.940741] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 6.942334] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 6.952529] systemd-modules-load[269]: Module 'atkbd' is built in buildbot # [ 6.955506] systemd-modules-load[269]: Module 'loop' is built in buildbot # [ 6.976251] systemd[1]: Started Journal Service. buildbot # [ 6.965842] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 6.966862] systemd[1]: Mounted Huge Pages File System. buildbot # [ 6.967757] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 6.972812] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 6.976602] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 6.980740] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 6.983181] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 6.989644] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 6.990564] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 6.991547] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.003759] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.006241] systemd-modules-load[269]: Inserted module 'tls' buildbot # [ 7.010380] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.021363] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.035073] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.042016] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.076062] EXT4-fs (vda): re-mounted 73f4feb7-b222-4b97-8120-6f2e05acf4d1. buildbot # [ 7.070145] systemd-oomd[271]: No swap; memory pressure usage will be degraded buildbot # [ 7.084523] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.089305] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.110351] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.126073] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.132384] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.139716] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.148318] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.185617] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.191754] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.235108] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.257222] systemd-journald[268]: Received client request to flush runtime journal. buildbot # [ 7.291544] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.299427] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.302140] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.304429] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.358156] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 7.359185] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 7.364885] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 7.600944] systemd-udevd[300]: Using default interface naming scheme 'v260'. buildbot # [ 7.605218] systemd[1]: Mounting /run/wrappers... buildbot # [ 7.657828] systemd[1]: Mounted /run/wrappers. buildbot # [ 7.659248] systemd[1]: Reached target Local File Systems. buildbot # [ 7.663030] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 7.666972] systemd[1]: Starting register-nix-paths.service... buildbot # [ 7.671623] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 7.673305] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 7.678615] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 7.704103] systemd[1]: Starting Create System Files and Directories... buildbot # [ 7.809763] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 7.821034] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 7.857837] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 7.938300] systemd[1]: Finished Create System Files and Directories. buildbot # [ 7.954790] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 7.965131] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.100499] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.175153] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.188148] systemd[1]: Starting Update is Completed... buildbot # [ 8.277724] systemd[1]: Finished Update is Completed. buildbot # [ 8.688007] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 8.690409] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 8.964393] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.096656] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.098655] systemd[1]: Reached target System Initialization. buildbot # [ 9.100140] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.104721] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.105903] systemd[1]: Reached target Timer Units. buildbot # [ 9.106699] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.112393] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.113208] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.114490] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.115346] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.120318] systemd[1]: Reached target Socket Units. buildbot # [ 9.128617] systemd[1]: Reached target Basic System. buildbot # [ 9.129701] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.132785] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.140186] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.152809] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.167925] systemd[1]: Starting resolvconf update... buildbot # [ 9.172191] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.222266] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.281612] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.285068] nsncd[388]: Oct 04 07:41:57.934 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.295324] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.300281] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.306455] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.319929] systemd[1]: Starting User Login Management... buildbot # [ 9.326687] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.450869] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 9.454645] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 9.458010] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 9.467265] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 9.472523] dbus-broker-launch[398]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.483167] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 9.490815] dbus-broker-launch[398]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.496814] dbus-broker-launch[398]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.509547] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 9.516135] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 9.523211] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.528952] systemd-logind[411]: New seat seat0. buildbot # [ 9.533331] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.566602] dbus-broker-launch[398]: Ready buildbot # [ 9.570752] systemd[1]: Started User Login Management. buildbot # [ 9.580160] systemd[1]: Starting linger-users.service... buildbot # [ 9.612189] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.618592] nsncd[454]: Oct 04 07:41:58.266 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.627218] systemd[1]: Finished resolvconf update. buildbot # [ 9.632222] systemd[1]: Reached target Preparation for Network. buildbot # [ 9.634497] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.638206] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.640901] systemd[1]: Starting DHCP Client... buildbot # [ 9.645319] systemd[1]: Starting Extra networking commands.... buildbot # [ 9.671608] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 9.674388] systemd[1]: Finished linger-users.service. buildbot # [ 9.866304] dhcpcd[484]: dhcpcd-10.3.2 starting buildbot # [ 9.884341] dhcpcd[515]: dev: loaded udev buildbot # [ 9.890240] dhcpcd[515]: no valid interfaces found buildbot # [ 9.892456] dhcpcd[515]: no valid interfaces found buildbot # [ 9.919283] systemd[1]: Finished Extra networking commands.. buildbot # [ 9.921300] systemd[1]: Reached target Network. buildbot # [ 9.928195] systemd[1]: Starting Nginx Web Server... buildbot # [ 9.935979] systemd[1]: Starting PostgreSQL Server... buildbot # [ 9.948339] systemd[1]: Starting SSH Daemon... buildbot # [ 9.955498] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.012750] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 10.063498] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.087110] systemd[1]: Started Getty on tty1. buildbot # [ 10.089891] systemd[1]: Reached target Login Prompts. buildbot # [ 10.127054] sshd[530]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.129237] systemd[1]: Started SSH Daemon. buildbot # [ 10.136970] sshd[530]: Server listening on :: port 22. buildbot # [ 10.138594] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.305199] setup-git-repo-start[547]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.316463] setup-git-repo-start[547]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.318074] setup-git-repo-start[547]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.321317] setup-git-repo-start[547]: hint: call: buildbot # [ 10.329453] setup-git-repo-start[547]: hint: buildbot # [ 10.338873] setup-git-repo-start[547]: hint: git config --global init.defaultBranch buildbot # [ 10.340329] setup-git-repo-start[547]: hint: buildbot # [ 10.342538] setup-git-repo-start[547]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.352236] setup-git-repo-start[547]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.353687] setup-git-repo-start[547]: hint: buildbot # [ 10.354311] setup-git-repo-start[547]: hint: git branch -m buildbot # [ 10.355172] setup-git-repo-start[547]: hint: buildbot # [ 10.355791] setup-git-repo-start[547]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.367602] setup-git-repo-start[547]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 10.374298] postgresql-pre-start[544]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 10.378685] postgresql-pre-start[544]: This user must also own the server process. buildbot # [ 10.387934] nginx-pre-start[542]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 10.397273] nginx-pre-start[542]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 10.405016] postgresql-pre-start[544]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 10.413628] postgresql-pre-start[544]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 10.420172] postgresql-pre-start[544]: The default text search configuration will be set to "english". buildbot # [ 10.423308] postgresql-pre-start[544]: Data page checksums are disabled. buildbot # [ 10.430047] postgresql-pre-start[544]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 10.437095] postgresql-pre-start[544]: creating subdirectories ... ok buildbot # [ 10.440267] postgresql-pre-start[544]: selecting dynamic shared memory implementation ... posix buildbot # [ 10.445615] systemd[1]: Started Nginx Web Server. buildbot # [ 10.456531] setup-git-repo-start[552]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.458019] setup-git-repo-start[552]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.459383] setup-git-repo-start[552]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.471094] setup-git-repo-start[552]: hint: call: buildbot # [ 10.473007] setup-git-repo-start[552]: hint: buildbot # [ 10.479317] setup-git-repo-start[552]: hint: git config --global init.defaultBranch buildbot # [ 10.493030] setup-git-repo-start[552]: hint: buildbot # [ 10.493787] setup-git-repo-start[552]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.495895] setup-git-repo-start[552]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.499973] setup-git-repo-start[552]: hint: buildbot # [ 10.512173] setup-git-repo-start[552]: hint: git branch -m buildbot # [ 10.515379] setup-git-repo-start[552]: hint: buildbot # [ 10.519876] setup-git-repo-start[552]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.524498] setup-git-repo-start[552]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 10.536301] setup-git-repo-start[563]: [master (root-commit) 573abd2] Initial commit with scheduled effects buildbot # [ 10.542714] setup-git-repo-start[563]: 3 files changed, 131 insertions(+) buildbot # [ 10.552372] setup-git-repo-start[563]: create mode 100644 effects-lib.nix buildbot # [ 10.553395] setup-git-repo-start[563]: create mode 100644 flake.lock buildbot # [ 10.557566] setup-git-repo-start[563]: create mode 100644 flake.nix buildbot # [ 10.619690] postgresql-pre-start[544]: selecting default "max_connections" ... 100 buildbot # [ 10.725268] setup-git-repo-start[567]: To /srv/repos/test-flake.git buildbot # [ 10.727539] setup-git-repo-start[567]: * [new branch] master -> master buildbot # [ 10.732632] setup-git-repo-start[567]: branch 'master' set up to track 'origin/master'. buildbot # [ 10.741981] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 10.754162] postgresql-pre-start[544]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.084812] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.119719] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 11.126813] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 11.129625] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 11.138260] systemd[1]: Starting Virtual Console Setup... buildbot # [ 11.495807] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 11.509715] systemd-vconsole-setup[596]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 11.516230] systemd[1]: Finished Virtual Console Setup. buildbot # [ 11.547944] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 11.557732] systemd[1]: Started backdoor.service. buildbot # [ 11.599640] 8021q: 802.1Q VLAN Support v1.8 buildbot # connecting to host... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 11.97 seconds) buildbot: (finished: waiting for the VM to finish booting, in 12.42 seconds) buildbot # [ 11.747351] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 11.779820] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 11.782187] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 11.786218] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 11.786530] cfg80211: failed to load regulatory.db buildbot # [ 11.780943] (udev-worker)[591]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.782439] (udev-worker)[586]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 11.792167] (udev-worker)[586]: Network interface NamePolicy= disabled on kernel command line. buildbot: (finished: waiting for unit sshd.service, in 12.54 seconds) buildbot: waiting for unit setup-git-repo.service buildbot: (finished: waiting for unit setup-git-repo.service, in 0.07 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 12.109802] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 12.118757] systemd[1]: Starting Address configuration of eth1... buildbot # [ 12.198023] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 12.186385] dhcpcd[515]: eth0: waiting for carrier buildbot # [ 12.193270] dhcpcd[515]: eth0: carrier acquired buildbot # [ 12.212131] dhcpcd[515]: DUID 00:01:00:01:32:54:bf:c8:52:54:00:12:34:56 buildbot # [ 12.213106] dhcpcd[515]: eth0: IAID 00:12:34:56 buildbot # [ 12.213768] dhcpcd[515]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 12.242904] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 12.244349] network-addresses-eth1-start[633]: adding address 192.168.1.1/24... done buildbot # [ 12.257143] network-addresses-eth1-start[633]: adding address 2001:db8:1::1/64... done buildbot # [ 12.277252] systemd[1]: Finished Address configuration of eth1. buildbot # [ 12.368379] systemd-logind[411]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 12.539624] mousedev: PS/2 mouse device common for all mice buildbot # [ 12.575267] systemd-logind[411]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 12.664699] dhcpcd[515]: eth0: soliciting a DHCP lease buildbot # [ 12.673540] dhcpcd[515]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 12.681941] dhcpcd[515]: eth0: probing address 10.0.2.15/24 buildbot # [ 13.071293] postgresql-pre-start[544]: selecting default time zone ... UTC buildbot # [ 13.077481] postgresql-pre-start[544]: creating configuration files ... ok buildbot # [ 13.586305] postgresql-pre-start[544]: running bootstrap script ... ok buildbot # [ 14.043163] dhcpcd[515]: eth0: soliciting an IPv6 router buildbot # [ 14.045345] dhcpcd[515]: eth0: Router Advertisement from fe80::2 buildbot # [ 14.046273] dhcpcd[515]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 14.047189] dhcpcd[515]: eth0: adding route to fec0::/64 buildbot # [ 14.047928] dhcpcd[515]: eth0: adding default route via fe80::2 buildbot # [ 14.686844] postgresql-pre-start[544]: performing post-bootstrap initialization ... ok buildbot # [ 14.954622] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 14.958118] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 14.960709] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 14.961564] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 14.968547] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.997840] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 15.002027] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 15.006227] systemd[1]: Starting Virtual Console Setup... buildbot # [ 15.062556] systemd-logind[411]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 15.094002] postgresql-pre-start[544]: syncing data to disk ... ok buildbot # [ 15.095849] postgresql-pre-start[544]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 15.097522] postgresql-pre-start[544]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 15.099759] postgresql-pre-start[544]: Success. You can now start the database server using: buildbot # [ 15.101304] postgresql-pre-start[544]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 15.225222] postgres[693]: [693] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 15.236191] postgres[693]: [693] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 15.237274] postgres[693]: [693] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 15.239205] postgres[693]: [693] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 15.249876] postgres[699]: [699] LOG: database system was shut down at 2026-10-04 07:42:03 GMT buildbot # [ 15.258418] postgres[693]: [693] LOG: database system is ready to accept connections buildbot # [ 15.264388] systemd[1]: Started PostgreSQL Server. buildbot # [ 15.270079] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 15.311530] systemd-vconsole-setup[688]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 15.322888] systemd[1]: Finished Virtual Console Setup. buildbot # [ 15.539566] postgresql-setup-start[711]: CREATE DATABASE buildbot # [ 15.585840] postgresql-setup-start[725]: CREATE ROLE buildbot # [ 15.605740] postgresql-setup-start[727]: ALTER DATABASE buildbot # [ 15.612292] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 15.615488] systemd[1]: Reached target PostgreSQL. buildbot # [ 15.617977] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 15.663806] buildbot-master-pre-start[732]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 17.557608] dhcpcd[515]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 17.557758] dhcpcd[515]: eth0: adding route to 10.0.2.0/24 buildbot # [ 17.557828] dhcpcd[515]: eth0: adding default route via 10.0.2.2 buildbot # [ 17.718141] systemd[1]: Started DHCP Client. buildbot # [ 20.023436] buildbot-master-pre-start[734]: updating existing installation buildbot # [ 20.028174] buildbot-master-pre-start[734]: not touching existing buildbot.tac buildbot # [ 20.029201] buildbot-master-pre-start[734]: creating buildbot.tac.new instead buildbot # [ 20.030162] buildbot-master-pre-start[734]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 20.031295] buildbot-master-pre-start[734]: creating database (postgresql://@/buildbot) buildbot # [ 20.036204] buildbot-master-pre-start[734]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 20.371183] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 20.377015] systemd[1]: Started Buildbot Worker.. buildbot # [ 20.379157] systemd[1]: Reached target Multi-User System. buildbot # [ 20.380920] systemd[1]: Startup finished in 946ms (kernel) + 3.839s (initrd) + 15.592s (userspace) = 20.378s. buildbot: (finished: waiting for unit multi-user.target, in 9.18 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 21.883178] twistd[829]: Starting worker local-worker-000 buildbot # [ 21.883334] twistd[829]: 2026-10-04T07:42:09+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 21.887299] twistd[829]: 2026-10-04T07:42:10+0000 [-] Loaded. buildbot # [ 21.888325] twistd[829]: 2026-10-04T07:42:10+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 21.890728] twistd[829]: 2026-10-04T07:42:10+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 21.893275] twistd[829]: 2026-10-04T07:42:10+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 21.894791] twistd[829]: 2026-10-04T07:42:10+0000 [-] recording hostname in twistd.hostname buildbot # [ 21.897458] twistd[829]: 2026-10-04T07:42:10+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 21.903119] twistd[829]: 2026-10-04T07:42:10+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.3942187291308397 seconds. buildbot # [ 21.906416] twistd[829]: 2026-10-04T07:42:10+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.334115] twistd[828]: 2026-10-04T07:42:09+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 23.336137] twistd[828]: 2026-10-04T07:42:11+0000 [-] Loaded. buildbot # [ 23.336224] twistd[828]: 2026-10-04T07:42:11+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 23.336257] twistd[828]: 2026-10-04T07:42:11+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 23.336325] twistd[828]: 2026-10-04T07:42:11+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 23.342785] twistd[828]: 2026-10-04T07:42:11+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 23.994265] twistd[828]: 2026-10-04T07:42:12+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 24.087085] twistd[828]: 2026-10-04T07:42:12+0000 [-] adding 9 new builders, removing 0 buildbot # [ 24.188200] twistd[828]: 2026-10-04T07:42:12+0000 [-] adding 3 new services, removing 0 buildbot # [ 24.306255] twistd[829]: 2026-10-04T07:42:12+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 24.310543] twistd[829]: 2026-10-04T07:42:12+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.3122132655296097 seconds. buildbot # [ 24.328121] twistd[829]: 2026-10-04T07:42:12+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 24.398343] twistd[828]: 2026-10-04T07:42:13+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 24.405966] twistd[828]: 2026-10-04T07:42:13+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 24.424111] twistd[828]: 2026-10-04T07:42:13+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 24.623634] twistd[828]: 2026-10-04T07:42:13+0000 [-] BuildbotSite starting on 8010 buildbot # [ 24.626196] twistd[828]: 2026-10-04T07:42:13+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 24.629241] twistd[828]: 2026-10-04T07:42:13+0000 [-] adding 5 new workers, removing 0 buildbot # [ 24.639728] twistd[828]: 2026-10-04T07:42:13+0000 [-] PBServerFactory starting on 9989 buildbot # [ 24.642326] twistd[828]: 2026-10-04T07:42:13+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 24.699839] sshd-session[888]: Accepted publickey for root from ::1 port 58786 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 24.713939] twistd[828]: 2026-10-04T07:42:13+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.715124] twistd[828]: 2026-10-04T07:42:13+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.719691] twistd[828]: 2026-10-04T07:42:13+0000 [-] message from master: attached buildbot # [ 24.723330] twistd[828]: 2026-10-04T07:42:13+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 24.726253] sshd-session[888]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.731951] twistd[828]: 2026-10-04T07:42:13+0000 [-] bot attached buildbot # [ 24.734048] twistd[828]: 2026-10-04T07:42:13+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 24.736653] twistd[828]: 2026-10-04T07:42:13+0000 [-] message from master: attached buildbot # [ 24.760895] twistd[828]: 2026-10-04T07:42:13+0000 [-] BuildMaster is running buildbot # [ 24.773503] systemd[1]: Created slice Slice /user/0. buildbot # [ 24.781460] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 24.793876] systemd-logind[411]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 24.823830] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 24.834999] systemd[1]: Starting User Manager for UID 0... buildbot # [ 24.870394] (systemd)[893]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.876133] systemd-logind[411]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 25.204056] systemd[893]: Queued start job for default target Main User Target. buildbot # [ 25.209659] systemd[893]: Created slice User Application Slice. buildbot # [ 25.211769] systemd[893]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 25.213034] systemd[893]: Reached target Paths. buildbot # [ 25.213998] systemd[893]: Reached target Timers. buildbot # [ 25.215202] systemd[893]: Starting D-Bus User Message Bus Socket... buildbot # [ 25.218116] systemd[893]: Starting Create User Files and Directories... buildbot # [ 25.258708] systemd[893]: Finished Create User Files and Directories. buildbot # [ 25.297483] systemd[893]: Listening on D-Bus User Message Bus Socket. buildbot # [ 25.301203] systemd[893]: Reached target Sockets. buildbot # [ 25.301949] systemd[893]: Reached target Basic System. buildbot # [ 25.302705] systemd[893]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 25.304284] systemd[893]: Reached target Main User Target. buildbot # [ 25.305072] systemd[893]: Startup finished in 403ms. buildbot # [ 25.305839] systemd[1]: Started User Manager for UID 0. buildbot # [ 25.308792] systemd[1]: Started Session 1 of User root. buildbot # [ 25.338047] sshd-session[907]: Received disconnect from ::1 port 58786:11: disconnected by user buildbot # [ 25.342019] sshd-session[907]: Disconnected from user root ::1 port 58786 buildbot # [ 25.343142] sshd-session[888]: pam_unix(sshd:session): session closed for user root buildbot # [ 25.356948] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 25.357853] systemd-logind[411]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 25.359437] systemd-logind[411]: Removed session 1. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.24 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 25.530154] sshd-session[912]: Accepted publickey for root from ::1 port 58796 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 25.542426] sshd-session[912]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 25.553456] systemd-logind[411]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 25.560302] systemd[1]: Started Session 3 of User root. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot # [ 25.621549] sshd-session[923]: Received disconnect from ::1 port 58796:11: disconnected by user buildbot # [ 25.622938] sshd-session[923]: Disconnected from user root ::1 port 58796 buildbot # [ 25.623867] sshd-session[912]: pam_unix(sshd:session): session closed for user root buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.13 seconds) (finished: subtest: Master and worker services start, in 4.55 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 25.638397] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 25.639647] systemd-logind[411]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 25.642661] systemd-logind[411]: Removed session 3. buildbot # [ 25.672724] twistd[828]: 2026-10-04T07:42:14+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 14373 0 0100 266 100 266 0 0 12586 0 0100 266 100 266 0 0 11277 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.11 seconds) (finished: subtest: Project is registered, in 0.11 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.32 seconds) (finished: subtest: CLI list-schedules works, in 0.32 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 573abd2..8580b8a master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.09 seconds) (finished: subtest: Push a new commit to trigger build, in 0.09 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3842 0 0100 51 100 51 0 0 3210 0 0100 51 100 51 0 0 2783 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.05 seconds) buildbot # [ 26.622713] twistd[829]: 2026-10-04T07:42:15+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.633081] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=55864) buildbot # [ 26.638444] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.645557] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 26.657023] twistd[828]: 2026-10-04T07:42:15+0000 [-] bot attached buildbot # [ 26.664090] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 26.666680] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 26.676797] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 26.689941] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 26.706380] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 26.724273] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 26.725906] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 26.727367] twistd[828]: 2026-10-04T07:42:15+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 26.770084] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.771287] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.789150] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.790343] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.791480] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.813768] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.814949] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.826780] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] message from master: attached buildbot # [ 26.827962] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 26.833768] twistd[829]: 2026-10-04T07:42:15+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3003 0 0100 51 100 51 0 0 2445 0 0100 51 100 51 0 0 2094 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4249 0 0100 51 100 51 0 0 3167 0 0100 51 100 51 0 0 2570 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4883 0 0100 51 100 51 0 0 3532 0 0100 51 100 51 0 0 2777 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2923 0 0100 51 100 51 0 0 2383 0 0100 51 100 51 0 0 1989 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3269 0 0100 51 100 51 0 0 2479 0 0100 51 100 51 0 0 2095 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5283 0 0100 51 100 51 0 0 3635 0 0100 51 100 51 0 0 2851 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3907 0 0100 51 100 51 0 0 2945 0 0100 51 100 51 0 0 2402 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 34.622025] sshd-session[1002]: Accepted publickey for root from ::1 port 50630 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.634900] sshd-session[1002]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.648483] systemd-logind[411]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.653526] systemd[1]: Started Session 4 of User root. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 34.689110] sshd-session[1005]: Received disconnect from ::1 port 50630:11: disconnected by user buildbot # [ 34.690699] sshd-session[1005]: Disconnected from user root ::1 port 50630 buildbot # [ 34.700516] sshd-session[1002]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.707542] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 34.713835] systemd-logind[411]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 34.715032] systemd-logind[411]: Removed session 4. buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1888 0 0100 51 100 51 0 0 1603 0 0100 51 100 51 0 0 1352 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 34.872815] sshd-session[1013]: Accepted publickey for root from ::1 port 50636 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.884741] sshd-session[1013]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.896074] systemd-logind[411]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.900435] systemd[1]: Started Session 5 of User root. buildbot # [ 34.938610] sshd-session[1016]: Received disconnect from ::1 port 50636:11: disconnected by user buildbot # [ 34.944262] sshd-session[1016]: Disconnected from user root ::1 port 50636 buildbot # [ 34.945433] sshd-session[1013]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.949753] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 34.954027] systemd-logind[411]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 34.955219] systemd-logind[411]: Removed session 5. buildbot # [ 34.969003] twistd[828]: 2026-10-04T07:42:23+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 35.005097] twistd[828]: 2026-10-04T07:42:23+0000 [-] gitpoller: processing 1 changes: ['8580b8ade0abdc1c93fe62a8b717da1a5a624717'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 35.144169] twistd[828]: 2026-10-04T07:42:23+0000 [-] added change with revision 8580b8ade0abdc1c93fe62a8b717da1a5a624717 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4634 0 0100 51 100 51 0 0 3389 0 0100 51 100 51 0 0 2717 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3280 0 0100 51 100 51 0 0 2557 0 0100 51 100 51 0 0 2140 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5179 0 0100 51 100 51 0 0 3682 0 0100 51 100 51 0 0 2881 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4898 0 0100 51 100 51 0 0 3511 0 0100 51 100 51 0 0 2768 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1571 0 0100 51 100 51 0 0 1237 0 0100 51 100 51 0 0 1160 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 40.262320] twistd[828]: 2026-10-04T07:42:28+0000 [-] added buildset 1 to database buildbot # [ 40.478838] twistd[828]: 2026-10-04T07:42:29+0000 [-] starting build using worker buildbot # [ 40.488485] twistd[828]: 2026-10-04T07:42:29+0000 [-] .startBuild buildbot # [ 40.568871] twistd[828]: 2026-10-04T07:42:29+0000 [-] acquireLocks(worker , locks []) buildbot # [ 40.573972] twistd[828]: 2026-10-04T07:42:29+0000 [-] starting build .. pinging the worker buildbot # [ 40.579930] twistd[828]: 2026-10-04T07:42:29+0000 [-] sending ping buildbot # [ 40.582166] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 40.583752] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] message from master: ping buildbot # [ 40.604810] twistd[828]: 2026-10-04T07:42:29+0000 [-] : RemoteCommand.run [0] buildbot # [ 40.612283] twistd[828]: 2026-10-04T07:42:29+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 40.613596] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 40.614780] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 40.619010] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 40.624146] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.626374] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 40.627779] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 40.633795] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 40.644071] twistd[829]: 2026-10-04T07:42:29+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.026657 buildbot # [ 40.646726] twistd[829]: 2026-10-04T07:42:29+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 40.677925] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.717429] twistd[828]: 2026-10-04T07:42:29+0000 [-] : RemoteCommand.run [1] buildbot # [ 40.726574] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 40.727805] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 40.733098] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 40.735277] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 40.743730] twistd[828]: 2026-10-04T07:42:29+0000 [-] : RemoteCommand.run [2] buildbot # [ 40.769123] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 40.770421] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 40.775383] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.780957] twistd[828]: 2026-10-04T07:42:29+0000 [-] : RemoteCommand.run [3] buildbot # [ 40.816931] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 40.822190] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 40.830182] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.836086] twistd[828]: 2026-10-04T07:42:29+0000 [-] : RemoteCommand.run [4] buildbot # [ 40.870334] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 40.874745] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 40.879694] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.886916] twistd[828]: 2026-10-04T07:42:29+0000 [-] No git repo present, making full clone buildbot # [ 40.889296] twistd[828]: 2026-10-04T07:42:29+0000 [-] : RemoteCommand.run [5] buildbot # [ 40.895304] twistd[828]: 2026-10-04T07:42:29+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 40.917378] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 40.922918] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 40.941375] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 40.962142] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.968733] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 40.974487] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 40.984959] twistd[829]: 2026-10-04T07:42:29+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 41.162661] sshd-session[1053]: Accepted publickey for root from ::1 port 38280 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 41.175113] sshd-session[1053]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 41.191491] systemd-logind[411]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 41.197379] systemd[1]: Started Session 6 of User root. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 41.252254] sshd-session[1056]: Received disconnect from ::1 port 38280:11: disconnected by user buildbot # [ 41.253621] sshd-session[1056]: Disconnected from user root ::1 port 38280 buildbot # [ 41.254627] sshd-session[1053]: pam_unix(sshd:session): session closed for user root buildbot # [ 41.264705] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 41.271044] systemd-logind[411]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 41.273247] systemd-logind[411]: Removed session 6. buildbot # [ 41.287910] twistd[829]: 2026-10-04T07:42:29+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.366919 buildbot # [ 41.299358] twistd[829]: 2026-10-04T07:42:29+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 41.308126] twistd[828]: 2026-10-04T07:42:29+0000 [Broker,0,127.0.0.1] rc=0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 20339 0 0100 401 100 401 0 0 17990 0 0100 401 100 401 0 0 12449 0 0 buildbot # [ 41.363318] twistd[828]: 2026-10-04T07:42:30+0000 [-] : RemoteCommand.run [6] buildbot # [ 41.373790] twistd[828]: 2026-10-04T07:42:30+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']' in dir 'build' buildbot # [ 41.380488] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 41.381872] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): RunProcess._startCommand buildbot # [ 41.385818] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 8580b8ade0abdc1c93fe62a8b717da1a5a624717 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 41.393354] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.398276] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): watching logfiles {} buildbot # [ 41.401932] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'8580b8ade0abdc1c93fe62a8b717da1a5a624717'] buildbot # [ 41.408794] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): using PTY: False buildbot # [ 41.419702] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '8580b8ade0abdc1c93fe62a8b717da1a5a624717']): command finished with signal None, exit code 0, elapsedTime: 0.055072 buildbot # [ 41.425345] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 41.428860] twistd[828]: 2026-10-04T07:42:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.447560] twistd[828]: 2026-10-04T07:42:30+0000 [-] : RemoteCommand.run [7] buildbot # [ 41.451414] twistd[828]: 2026-10-04T07:42:30+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 41.460924] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 41.464181] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 41.467408] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 41.477392] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.483588] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 41.487364] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 41.493239] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 41.579322] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.113888 buildbot # [ 41.588406] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 41.590632] twistd[828]: 2026-10-04T07:42:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.605624] twistd[828]: 2026-10-04T07:42:30+0000 [-] : RemoteCommand.run [8] buildbot # [ 41.607203] twistd[828]: 2026-10-04T07:42:30+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 41.620872] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 41.627016] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 41.630330] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 41.631790] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.634624] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 41.636481] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 41.640188] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 41.646215] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.022387 buildbot # [ 41.648377] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 41.674054] twistd[828]: 2026-10-04T07:42:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.694287] twistd[828]: 2026-10-04T07:42:30+0000 [-] Got Git revision 8580b8ade0abdc1c93fe62a8b717da1a5a624717 buildbot # [ 41.695741] twistd[828]: 2026-10-04T07:42:30+0000 [-] : RemoteCommand.run [9] buildbot # [ 41.722645] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 41.723866] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 41.736872] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 41.739646] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 41.751128] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 41.763082] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 41.767983] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 41.771635] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.038557 buildbot # [ 41.781393] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 41.786342] twistd[828]: 2026-10-04T07:42:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.807599] twistd[828]: 2026-10-04T07:42:30+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 41.837075] twistd[828]: 2026-10-04T07:42:30+0000 [-] step 'git' complete: success (None) buildbot # [ 41.845361] twistd[828]: 2026-10-04T07:42:30+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 41.866456] twistd[828]: 2026-10-04T07:42:30+0000 [-] : RemoteCommand.run [10] buildbot # [ 41.872152] twistd[828]: 2026-10-04T07:42:30+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 41.874033] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 41.875195] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 41.879411] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 41.882495] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.885609] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 41.887765] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 41.891002] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 41.903007] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.036942 buildbot # [ 41.905668] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 41.922007] twistd[828]: 2026-10-04T07:42:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.926950] twistd[828]: 2026-10-04T07:42:30+0000 [-] : RemoteCommand.run [11] buildbot # [ 41.931804] twistd[828]: 2026-10-04T07:42:30+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 41.969498] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 41.973564] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 41.984797] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 41.993946] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.001721] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 42.007870] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 42.017968] twistd[829]: 2026-10-04T07:42:30+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 42.125399] systemd[1]: Started Nix Daemon. buildbot # [ 42.207662] nix-daemon[1102]: accepted connection from pid 1101, user buildbot-worker buildbot # [ 42.231096] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.258728 buildbot # [ 42.242015] twistd[829]: 2026-10-04T07:42:30+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 42.245786] twistd[828]: 2026-10-04T07:42:30+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.270744] twistd[828]: 2026-10-04T07:42:30+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 42.286045] twistd[828]: 2026-10-04T07:42:30+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 42.311677] twistd[828]: 2026-10-04T07:42:30+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 42.323240] twistd[828]: 2026-10-04T07:42:30+0000 [-] step 'build flake' complete: success (None) buildbot # [ 42.335375] twistd[828]: 2026-10-04T07:42:30+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xea993e0f0c20>, hideStepIf=. at 0xea993e0f0cc0>)): [] buildbot # [ 42.345140] twistd[828]: 2026-10-04T07:42:30+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 42.360841] twistd[828]: 2026-10-04T07:42:31+0000 [-] : RemoteCommand.run [12] buildbot # [ 42.363160] twistd[828]: 2026-10-04T07:42:31+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 42.371503] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 42.373105] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 42.377351] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 42.380460] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.383596] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 42.386356] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 42.389926] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 42.395636] twistd[829]: 2026-10-04T07:42:31+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.035952 buildbot # [ 42.398289] twistd[829]: 2026-10-04T07:42:31+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 42.413702] twistd[828]: 2026-10-04T07:42:31+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.449464] twistd[828]: 2026-10-04T07:42:31+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # % Total % Received % Xferd Average Speed Time T[ 42.462104] twistd[828]: 2026-10-04T07:42:31+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # ime Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 17855 0 0100 401 100 401 0 0 16048 0 [ 42.488375] twistd[828]: 2026-10-04T07:42:31+0000 [-] : RemoteCommand.run [13] buildbot # [ 42.490993] twistd[828]: 2026-10-04T07:42:31+0000 [-] command '['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # 0100 401 100 401 0 0 10479 0 0 buildbot # [ 42.505878] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 42.507527] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 42.511414] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 8580b8ade0abdc1c93fe62a8b717da1a5a624717 --branch master --repo test-flake buildbot # [ 42.515499] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.519430] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot # [ 42.522475] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'8580b8ade0abdc1c93fe62a8b717da1a5a624717', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.528779] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 42.764442] nix-daemon[1102]: accepted connection from pid 1114, user buildbot-worker buildbot # [ 42.799555] twistd[829]: 2026-10-04T07:42:31+0000 [-] (command ['buildbot-effects', 'list', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.301952 buildbot # [ 42.805206] twistd[829]: 2026-10-04T07:42:31+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 42.808793] twistd[828]: 2026-10-04T07:42:31+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.839332] twistd[828]: 2026-10-04T07:42:31+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xea993e0f1440>, logEnviron=False)): [] buildbot # [ 42.983381] twistd[828]: 2026-10-04T07:42:31+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 42.998683] twistd[828]: 2026-10-04T07:42:31+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 43.006697] twistd[828]: 2026-10-04T07:42:31+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 43.021074] twistd[828]: 2026-10-04T07:42:31+0000 [-] : RemoteCommand.run [14] buildbot # [ 43.023755] twistd[828]: 2026-10-04T07:42:31+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 43.034809] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 43.036295] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 43.038962] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 8580b8ade0abdc1c93fe62a8b717da1a5a624717 --branch master --repo test-flake buildbot # [ 43.043447] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 43.047326] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 43.050364] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'8580b8ade0abdc1c93fe62a8b717da1a5a624717', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 43.057000] twistd[829]: 2026-10-04T07:42:31+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 43.276459] nix-daemon[1102]: accepted connection from pid 1123, user buildbot-worker buildbot # [ 43.308084] twistd[829]: 2026-10-04T07:42:31+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '8580b8ade0abdc1c93fe62a8b717da1a5a624717', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.279938 buildbot # [ 43.311185] twistd[829]: 2026-10-04T07:42:31+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 43.319943] twistd[828]: 2026-10-04T07:42:31+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 43.353062] twistd[828]: 2026-10-04T07:42:32+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xea993e0f1620>, hideStepIf=. at 0xea993e0f16c0>, logEnviron=False)): [] buildbot # [ 43.368935] twistd[828]: 2026-10-04T07:42:32+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 43.392099] twistd[828]: 2026-10-04T07:42:32+0000 [-] : build finished buildbot # [ 43.393682] twistd[828]: 2026-10-04T07:42:32+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 30274 0 0100 411 100 411 0 0 25572 0 0100 411 100 411 0 0 21824 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.45 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) (finished: subtest: Schedule cache is created, in 0.04 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 49203 0 0100 3793 100 3793 0 0 47571 0 0100 3793 100 3793 0 0 46157 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds) buildbot # [ 44.618268] sshd-session[1160]: Accepted publickey for root from ::1 port 38292 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.631224] sshd-session[1160]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.644488] systemd-logind[411]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.653310] systemd[1]: Started Session 7 of User root. buildbot # [ 44.686382] sshd-session[1163]: Received disconnect from ::1 port 38292:11: disconnected by user buildbot # [ 44.696109] sshd-session[1163]: Disconnected from user root ::1 port 38292 buildbot # [ 44.697585] sshd-session[1160]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.701080] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 44.712400] systemd-logind[411]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 44.714661] systemd-logind[411]: Removed session 7. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37065 0 0100 3793 100 3793 0 0 36110 0 0100 3793 100 3793 0 0 35271 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot # [ 44.919185] sshd-session[1168]: Accepted publickey for root from ::1 port 38304 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.928291] sshd-session[1168]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.936710] systemd-logind[411]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.946591] systemd[1]: Started Session 8 of User root. buildbot # [ 44.975882] sshd-session[1184]: Received disconnect from ::1 port 38304:11: disconnected by user buildbot # [ 44.977961] sshd-session[1184]: Disconnected from user root ::1 port 38304 buildbot # [ 44.981124] sshd-session[1168]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.985252] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 44.987149] systemd-logind[411]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 44.990059] systemd-logind[411]: Removed session 8. buildbot # [ 44.995270] twistd[828]: 2026-10-04T07:42:33+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37533 0 0100 3793 100 3793 0 0 36575 0 0100 3793 100 3793 0 0 35729 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 36642 0 0100 3793 100 3793 0 0 35473 0 0100 3793 100 3793 0 0 34684 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 40111 0 [ 48.347705] twistd[828]: 2026-10-04T07:42:36+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 48.350256] twistd[828]: 2026-10-04T07:42:37+0000 [-] beginning configuration update buildbot # 0100 3793 100 3793 0 0 37177 0 0100 3793 100 3793 0 0 36294 [ 48.356509] twistd[828]: 2026-10-04T07:42:37+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot # [ 48.383783] twistd[828]: 2026-10-04T07:42:37+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 48.405712] twistd[828]: 2026-10-04T07:42:37+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 48.532565] twistd[828]: 2026-10-04T07:42:37+0000 [-] configuration update complete (took 0.179 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 37754 0 0100 4079 100 4079 0 0 36753 0 0100 4079 100 4079 0 0 35946 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 44925 0 0100 4079 100 4079 0 0 43642 0 0100 4079 100 4079 0 0 42487 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds) (finished: subtest: Nightly schedulers are created, in 6.04 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 183.1k 0 0100 2371 100 2371 0 0 152.2k 0 0100 2371 100 2371 0 0 131.0k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.05 seconds) (finished: subtest: Scheduled effect builder exists, in 0.05 seconds) (finished: run the VM test script, in 50.43 seconds) test script finished in 50.47s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.23 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh