tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.01 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot: QEMU running (pid 12) buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot # Formatting '/build/vm-state-buildbot/tmp.uTUjzdF2i7', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 021ad04c-2ea6-42f5-a4d4-9fa33647dd78 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) buildbot # buildbot # buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA00 buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)... buildbot # buildbot # buildbot # buildbot # buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB00 buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)... buildbot # buildbot # buildbot # Booting from ROM... buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/m8wyrzw5cs777vrgv6dhnx8dnl5sha8h-nixos-system-buildbot-test/init regInfo=/nix/store/0l1dl0rgrnldccmyaz9ym4j9kiy3mkch-closure-info/registration console=ttyS0,115200n8 console=tty0 buildbot # [ 0.000000] BIOS-provided physical RAM map: buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved buildbot # [ 0.000000] NX (Execute Disable) protection: active buildbot # [ 0.000000] APIC: Static calls initialized buildbot # [ 0.000000] SMBIOS 2.8 present. buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 buildbot # [ 0.000000] DMI: Memory slots populated: 1/1 buildbot # [ 0.000000] Hypervisor detected: KVM buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x10000000000 buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 buildbot # [ 0.000000] kvm-clock: using sched offset of 522536247 cycles buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000005] tsc: Detected 2400.012 MHz processor buildbot # [ 0.000808] last_pfn = 0x3ffdb max_arch_pfn = 0x10000000000 buildbot # [ 0.000835] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs buildbot # [ 0.000838] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT buildbot # [ 0.002719] found SMP MP-table at [mem 0x000f5470-0x000f547f] buildbot # [ 0.002730] Using GB pages for direct mapping buildbot # [ 0.002808] RAMDISK: [mem 0x3e4ba000-0x3ffcffff] buildbot # [ 0.002816] ACPI: Early table checksum verification disabled buildbot # [ 0.002819] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) buildbot # [ 0.002823] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002827] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002834] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002836] ACPI: FACS 0x000000003FFE0000 000040 buildbot # [ 0.002838] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002839] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002841] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002842] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3] buildbot # [ 0.002843] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f] buildbot # [ 0.002844] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] buildbot # [ 0.002844] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b] buildbot # [ 0.002845] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3] buildbot # [ 0.002845] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb] buildbot # [ 0.003072] No NUMA configuration found buildbot # [ 0.003073] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff] buildbot # [ 0.003075] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff] buildbot # [ 0.005514] Zone ranges: buildbot # [ 0.005515] DMA [mem 0x0000000000001000-0x0000000000ffffff] buildbot # [ 0.005516] DMA32 [mem 0x0000000001000000-0x000000003ffdafff] buildbot # [ 0.005518] Normal empty buildbot # [ 0.005518] Device empty buildbot # [ 0.005519] Movable zone start for each node buildbot # [ 0.005520] Early memory node ranges buildbot # [ 0.005520] node 0: [mem 0x0000000000001000-0x000000000009efff] buildbot # [ 0.005521] node 0: [mem 0x0000000000100000-0x000000003ffdafff] buildbot # [ 0.005522] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff] buildbot # [ 0.005594] On node 0, zone DMA: 1 pages in unavailable ranges buildbot # [ 0.005882] On node 0, zone DMA: 97 pages in unavailable ranges buildbot # [ 0.025122] On node 0, zone DMA32: 37 pages in unavailable ranges buildbot # [ 0.025526] ACPI: PM-Timer IO Port: 0x608 buildbot # [ 0.025537] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) buildbot # [ 0.025562] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 buildbot # [ 0.025565] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) buildbot # [ 0.025567] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) buildbot # [ 0.025568] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) buildbot # [ 0.025569] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) buildbot # [ 0.025570] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) buildbot # [ 0.025572] ACPI: Using ACPI (MADT) for SMP configuration information buildbot # [ 0.025573] ACPI: HPET id: 0x8086a201 base: 0xfed00000 buildbot # [ 0.025576] TSC deadline timer available buildbot # [ 0.025580] CPU topo: Max. logical packages: 1 buildbot # [ 0.025581] CPU topo: Max. logical dies: 1 buildbot # [ 0.025581] CPU topo: Max. dies per package: 1 buildbot # [ 0.025585] CPU topo: Max. threads per core: 1 buildbot # [ 0.025585] CPU topo: Num. cores per package: 1 buildbot # [ 0.025586] CPU topo: Num. threads per package: 1 buildbot # [ 0.025586] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs buildbot # [ 0.025603] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() buildbot # [ 0.025633] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] buildbot # [ 0.025635] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] buildbot # [ 0.025636] [mem 0x40000000-0xfeffbfff] available for PCI devices buildbot # [ 0.025637] Booting paravirtualized kernel on KVM buildbot # [ 0.025640] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns buildbot # [ 0.030093] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 buildbot # [ 0.032828] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 buildbot # [ 0.032872] kvm-guest: PV spinlocks disabled, single CPU buildbot # [ 0.032874] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/m8wyrzw5cs777vrgv6dhnx8dnl5sha8h-nixos-system-buildbot-test/init regInfo=/nix/store/0l1dl0rgrnldccmyaz9ym4j9kiy3mkch-closure-info/registration console=ttyS0,115200n8 console=tty0 buildbot # [ 0.032968] Unknown kernel command line parameters "regInfo=/nix/store/0l1dl0rgrnldccmyaz9ym4j9kiy3mkch-closure-info/registration", will be passed to user space. buildbot # [ 0.032980] random: crng init done buildbot # [ 0.032981] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes buildbot # [ 0.033002] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.033572] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.033601] Fallback order for Node 0: 0 buildbot # [ 0.033604] Built 1 zonelists, mobility grouping on. Total pages: 262009 buildbot # [ 0.033605] Policy zone: DMA32 buildbot # [ 0.035898] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.038389] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.040765] allocated 2097152 bytes of page_ext buildbot # [ 0.050652] ftrace: allocating 48598 entries in 192 pages buildbot # [ 0.050655] ftrace: allocated 192 pages with 2 groups buildbot # [ 0.051526] Dynamic Preempt: lazy buildbot # [ 0.051705] rcu: Preemptible hierarchical RCU implementation. buildbot # [ 0.051706] rcu: RCU event tracing is enabled. buildbot # [ 0.051706] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.051708] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.051708] Rude variant of Tasks RCU enabled. buildbot # [ 0.051709] Tracing variant of Tasks RCU enabled. buildbot # [ 0.051709] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. buildbot # [ 0.051710] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.051720] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.051721] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.051722] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.056538] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 buildbot # [ 0.056819] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.056926] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.060465] Console: colour VGA+ 80x25 buildbot # [ 0.060468] printk: legacy console [tty0] enabled buildbot # [ 0.088691] printk: legacy console [ttyS0] enabled buildbot # [ 0.189402] ACPI: Core revision 20250807 buildbot # [ 0.190328] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns buildbot # [ 0.191969] APIC: Switch to symmetric I/O mode setup buildbot # [ 0.193017] x2apic enabled buildbot # [ 0.193771] APIC: Switched APIC routing to: physical x2apic buildbot # [ 0.195666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 buildbot # [ 0.196703] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns buildbot # [ 0.198440] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012) buildbot # [ 0.199525] x86/cpu: User Mode Instruction Prevention (UMIP) activated buildbot # [ 0.201565] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 buildbot # [ 0.202438] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 buildbot # [ 0.203441] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto buildbot # [ 0.204438] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl buildbot # [ 0.206438] Transient Scheduler Attacks: Vulnerable: No microcode buildbot # [ 0.207437] Spectre V2 : Mitigation: Enhanced / Automatic IBRS buildbot # [ 0.208437] Speculative Return Stack Overflow: Mitigation: Safe RET buildbot # [ 0.209437] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization buildbot # [ 0.211442] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier buildbot # [ 0.212438] active return thunk: srso_alias_return_thunk buildbot # [ 0.213459] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' buildbot # [ 0.214437] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' buildbot # [ 0.216437] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' buildbot # [ 0.218437] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' buildbot # [ 0.219437] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' buildbot # [ 0.220437] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' buildbot # [ 0.221437] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' buildbot # [ 0.223437] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 buildbot # [ 0.224437] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 buildbot # [ 0.225437] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 buildbot # [ 0.226437] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 buildbot # [ 0.227437] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 buildbot # [ 0.228437] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. buildbot # [ 0.263275] Freeing SMP alternatives memory: 44K buildbot # [ 0.264033] pid_max: default: 32768 minimum: 301 buildbot # [ 0.264568] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.265546] landlock: Up and running. buildbot # [ 0.266907] Yama: becoming mindful. buildbot # [ 0.267651] LSM support for eBPF active buildbot # [ 0.268541] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.269459] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.272315] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) buildbot # [ 0.273027] Performance Events: Fam17h+ core perfctr, AMD PMU driver. buildbot # [ 0.273442] ... version: 2 buildbot # [ 0.274176] ... bit width: 48 buildbot # [ 0.274440] ... generic counters: 6 buildbot # [ 0.275184] ... generic bitmap: 000000000000003f buildbot # [ 0.275450] ... fixed-purpose counters: 0 buildbot # [ 0.276214] ... fixed-purpose bitmap: 0000000000000000 buildbot # [ 0.276439] ... value mask: 0000ffffffffffff buildbot # [ 0.277372] ... max period: 00007fffffffffff buildbot # [ 0.278158] ... global_ctrl mask: 000000000000003f buildbot # [ 0.278555] signal: max sigframe size: 3376 buildbot # [ 0.279371] rcu: Hierarchical SRCU implementation. buildbot # [ 0.280099] rcu: Max phase no-delay instances is 400. buildbot # [ 0.284983] smp: Bringing up secondary CPUs ... buildbot # [ 0.285452] smp: Brought up 1 node, 1 CPU buildbot # [ 0.286140] smpboot: Total of 1 processors activated (4800.02 BogoMIPS) buildbot # [ 0.286618] Memory: 942400K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved) buildbot # [ 0.287681] devtmpfs: initialized buildbot # [ 0.288537] x86/mm: Memory block size: 128MB buildbot # [ 0.290244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns buildbot # [ 0.291462] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.292467] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.293533] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.294688] PM: RTC time: 07:41:30, date: 2026-10-04 buildbot # [ 0.298404] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.299632] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.300458] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.301597] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.302450] audit: initializing netlink subsys (disabled) buildbot # [ 0.303636] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.303638] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.304441] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.305443] audit: type=2000 audit(1791099691.359:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.307443] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.307444] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.308452] cpuidle: using governor menu buildbot # [ 0.310712] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 buildbot # [ 0.311667] PCI: Using configuration type 1 for base access buildbot # [ 0.312440] PCI: Using configuration type 1 for extended access buildbot # [ 0.313628] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. buildbot # [ 0.320755] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.321441] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.326441] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.327441] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.336012] ACPI: Added _OSI(Module Device) buildbot # [ 0.336442] ACPI: Added _OSI(Processor Device) buildbot # [ 0.337201] ACPI: Added _OSI(Processor Aggregator Device) buildbot # [ 0.343309] ACPI: 1 ACPI AML tables successfully acquired and loaded buildbot # [ 0.346976] ACPI: Interpreter enabled buildbot # [ 0.347456] ACPI: PM: (supports S0 S3 S4 S5) buildbot # [ 0.348215] ACPI: Using IOAPIC for interrupt routing buildbot # [ 0.348458] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug buildbot # [ 0.351440] PCI: Using E820 reservations for host bridge windows buildbot # [ 0.352566] ACPI: Enabled 2 GPEs in block 00 to 0F buildbot # [ 0.361419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) buildbot # [ 0.364724] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] buildbot # [ 0.365715] acpiphp: Slot [3] registered buildbot # [ 0.366470] acpiphp: Slot [4] registered buildbot # [ 0.367215] acpiphp: Slot [5] registered buildbot # [ 0.367460] acpiphp: Slot [6] registered buildbot # [ 0.368174] acpiphp: Slot [7] registered buildbot # [ 0.368474] acpiphp: Slot [8] registered buildbot # [ 0.369195] acpiphp: Slot [9] registered buildbot # [ 0.369460] acpiphp: Slot [10] registered buildbot # [ 0.370191] acpiphp: Slot [11] registered buildbot # [ 0.370491] acpiphp: Slot [12] registered buildbot # [ 0.371220] acpiphp: Slot [13] registered buildbot # [ 0.371458] acpiphp: Slot [14] registered buildbot # [ 0.372170] acpiphp: Slot [15] registered buildbot # [ 0.372491] acpiphp: Slot [16] registered buildbot # [ 0.373228] acpiphp: Slot [17] registered buildbot # [ 0.373464] acpiphp: Slot [18] registered buildbot # [ 0.374212] acpiphp: Slot [19] registered buildbot # [ 0.374460] acpiphp: Slot [20] registered buildbot # [ 0.375211] acpiphp: Slot [21] registered buildbot # [ 0.375458] acpiphp: Slot [22] registered buildbot # [ 0.376227] acpiphp: Slot [23] registered buildbot # [ 0.376460] acpiphp: Slot [24] registered buildbot # [ 0.377169] acpiphp: Slot [25] registered buildbot # [ 0.377465] acpiphp: Slot [26] registered buildbot # [ 0.378216] acpiphp: Slot [27] registered buildbot # [ 0.378512] acpiphp: Slot [28] registered buildbot # [ 0.379264] acpiphp: Slot [29] registered buildbot # [ 0.379976] acpiphp: Slot [30] registered buildbot # [ 0.380476] acpiphp: Slot [31] registered buildbot # [ 0.381210] PCI host bridge to bus 0000:00 buildbot # [ 0.381445] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] buildbot # [ 0.382440] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] buildbot # [ 0.383440] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] buildbot # [ 0.384440] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window] buildbot # [ 0.385439] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window] buildbot # [ 0.386441] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.387617] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.388899] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint buildbot # [ 0.389905] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint buildbot # [ 0.391468] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef] buildbot # [ 0.392392] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk buildbot # [ 0.393317] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk buildbot # [ 0.394237] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk buildbot # [ 0.395307] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk buildbot # [ 0.396446] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint buildbot # [ 0.399093] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f] buildbot # [ 0.400577] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint buildbot # [ 0.401737] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI buildbot # [ 0.402447] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB buildbot # [ 0.403662] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint buildbot # [ 0.406536] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] buildbot # [ 0.407454] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] buildbot # [ 0.408462] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref] buildbot # [ 0.409604] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] buildbot # [ 0.411206] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.414544] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] buildbot # [ 0.415447] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] buildbot # [ 0.416455] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] buildbot # [ 0.417446] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] buildbot # [ 0.419788] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.422378] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f] buildbot # [ 0.423122] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] buildbot # [ 0.424236] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] buildbot # [ 0.426625] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.428448] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf] buildbot # [ 0.429327] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] buildbot # [ 0.430240] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] buildbot # [ 0.432778] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.434470] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f] buildbot # [ 0.435385] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] buildbot # [ 0.436247] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] buildbot # [ 0.438570] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.441471] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f] buildbot # [ 0.442378] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] buildbot # [ 0.443250] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] buildbot # [ 0.445589] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.447448] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f] buildbot # [ 0.448342] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] buildbot # [ 0.449462] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] buildbot # [ 0.451643] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.453473] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf] buildbot # [ 0.454376] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] buildbot # [ 0.455251] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] buildbot # [ 0.456351] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref] buildbot # [ 0.458674] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.461441] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] buildbot # [ 0.462462] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] buildbot # [ 0.464714] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.468480] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff] buildbot # [ 0.469388] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] buildbot # [ 0.470236] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] buildbot # [ 0.472627] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.475448] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df] buildbot # [ 0.476328] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff] buildbot # [ 0.477214] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] buildbot # [ 0.482122] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 buildbot # [ 0.482819] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 buildbot # [ 0.483574] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 buildbot # [ 0.484574] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 buildbot # [ 0.485511] ACPI: PCI: Interrupt link LNKS configured for IRQ 9 buildbot # [ 0.487451] iommu: Default domain type: Translated buildbot # [ 0.488276] iommu: DMA domain TLB invalidation policy: lazy mode buildbot # [ 0.489515] ACPI: bus type USB registered buildbot # [ 0.490267] usbcore: registered new interface driver usbfs buildbot # [ 0.491153] usbcore: registered new interface driver hub buildbot # [ 0.491447] usbcore: registered new device driver usb buildbot # [ 0.493321] NetLabel: Initializing buildbot # [ 0.493930] NetLabel: domain hash size = 128 buildbot # [ 0.494440] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO buildbot # [ 0.495473] NetLabel: unlabeled traffic allowed by default buildbot # [ 0.496411] PCI: Using ACPI for IRQ routing buildbot # [ 0.497353] pci 0000:00:02.0: vgaarb: setting as boot VGA device buildbot # [ 0.497436] pci 0000:00:02.0: vgaarb: bridge control possible buildbot # [ 0.497436] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none buildbot # [ 0.497442] vgaarb: loaded buildbot # [ 0.498205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 buildbot # [ 0.498440] hpet0: 3 comparators, 64-bit 100.000000 MHz counter buildbot # [ 0.502513] clocksource: Switched to clocksource kvm-clock buildbot # [ 0.505936] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.506690] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.508090] pnp: PnP ACPI init buildbot # [ 0.509233] pnp: PnP ACPI: found 6 devices buildbot # [ 0.516803] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns buildbot # [ 0.518326] clocksource: Switched to clocksource acpi_pm buildbot # [ 0.519372] NET: Registered PF_INET protocol family buildbot # [ 0.520449] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.538155] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.539739] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.541094] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.542483] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.543779] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.544922] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.546310] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.547478] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.548774] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.549781] NET: Registered PF_XDP protocol family buildbot # [ 0.550667] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] buildbot # [ 0.551718] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] buildbot # [ 0.552771] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] buildbot # [ 0.553935] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window] buildbot # [ 0.555089] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window] buildbot # [ 0.556361] pci 0000:00:01.0: PIIX3: Enabling Passive Release buildbot # [ 0.557377] pci 0000:00:00.0: Limiting direct PCI/PCI transfers buildbot # [ 0.559852] ACPI: \_SB_.LNKD: Enabled at IRQ 11 buildbot # [ 0.562445] PCI: CLS 0 bytes, default 64 buildbot # [ 0.563380] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns buildbot # [ 0.565169] Trying to unpack rootfs image as initramfs... buildbot # [ 0.608067] Initialise system trusted keyrings buildbot # [ 0.610687] workingset: timestamp_bits=40 max_order=18 bucket_order=0 buildbot # [ 0.632070] Key type asymmetric registered buildbot # [ 0.634644] Asymmetric key parser 'x509' registered buildbot # [ 0.635556] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) buildbot # [ 0.638734] io scheduler mq-deadline registered buildbot # [ 0.639539] io scheduler kyber registered buildbot # [ 0.643217] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.644561] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A buildbot # [ 0.650047] Linux agpgart interface v0.103 buildbot # [ 0.650837] ACPI: bus type drm_connector registered buildbot # [ 0.654073] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.655201] usbserial: USB Serial support registered for generic buildbot # [ 0.658641] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. buildbot # [ 0.658641] Please enable it if your BIOS has the CPPC option. buildbot # [ 0.660967] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled buildbot # [ 0.663747] drop_monitor: Initializing network drop monitor service buildbot # [ 0.664967] NET: Registered PF_INET6 protocol family buildbot # [ 0.668073] Segment Routing with IPv6 buildbot # [ 0.670646] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.671745] IPI shorthand broadcast: enabled buildbot # [ 0.680149] sched_clock: Marking stable (543016472, 136609612)->(750449098, -70823014) buildbot # [ 0.688898] registered taskstats version 1 buildbot # [ 0.689955] Loading compiled-in X.509 certificates buildbot # [ 0.708801] Demotion targets for Node 0: null buildbot # [ 0.709762] Key type .fscrypt registered buildbot # [ 0.710472] Key type fscrypt-provisioning registered buildbot # [ 0.713751] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.714722] ima: Allocated hash algorithm: sha1 buildbot # [ 0.715550] ima: No architecture policies found buildbot # [ 0.719660] PM: Magic number: 14:198:672 buildbot # [ 0.721368] RAS: Correctable Errors collector initialized. buildbot # [ 0.729298] clk: Disabling unused clocks buildbot # [ 0.733637] PM: genpd: Disabling unused power domains buildbot # [ 0.900308] Freeing initrd memory: 27736K buildbot # [ 0.903543] Freeing unused decrypted memory: 2028K buildbot # [ 0.906316] Freeing unused kernel image (initmem) memory: 3636K buildbot # [ 0.907438] Write protecting the kernel read-only data: 32768k buildbot # [ 0.909450] Freeing unused kernel image (text/rodata gap) memory: 1272K buildbot # [ 0.911085] Freeing unused kernel image (rodata/data gap) memory: 776K buildbot # [ 0.962244] x86/mm: Checked W+X mappings: passed, no W+X pages found. buildbot # [ 0.963373] Run /init as init process buildbot # [ 0.974212] systemd[1]: Inserted module 'autofs4' buildbot # [ 0.990002] fuse: init (API version 7.45) buildbot # [ 0.996521] ACPI: \_SB_.LNKC: Enabled at IRQ 10 buildbot # [ 1.003234] ACPI: \_SB_.LNKA: Enabled at IRQ 10 buildbot # [ 1.006302] ACPI: \_SB_.LNKB: Enabled at IRQ 11 buildbot # [ 1.036358] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.373427] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.385251] systemd[1]: Detected virtualization kvm. buildbot # [ 1.387386] systemd[1]: Detected architecture x86-64. buildbot # [ 1.389548] systemd[1]: Running in initrd. buildbot # [ 1.392180] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.395024] systemd[1]: Hostname set to . buildbot # [ 1.459490] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.463871] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.465084] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.466521] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.467681] systemd[1]: Reached target Path Units. buildbot # [ 1.468556] systemd[1]: Reached target Slice Units. buildbot # [ 1.469473] systemd[1]: Reached target Swaps. buildbot # [ 1.470318] systemd[1]: Reached target Timer Units. buildbot # [ 1.471317] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.472596] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.473836] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.474912] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.475985] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.476944] systemd[1]: Reached target Socket Units. buildbot # [ 1.478780] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.482434] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.490802] systemd[1]: Starting Load Kernel Module configfs... buildbot # [ 1.504699] systemd[1]: Starting Journal Service... buildbot # [ 1.515695] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.522679] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.526339] netfs: FS-Cache loaded buildbot # [ 1.531733] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.544708] 9pnet: Installing 9P2000 support buildbot # [ 1.550005] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.556581] systemd[1]: modprobe@configfs.service: Deactivated successfully. buildbot # [ 1.568249] systemd[1]: Finished Load Kernel Module configfs. buildbot # [ 1.572117] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.585355] systemd-journald[67]: Collecting audit messages is disabled. buildbot # [ 1.588499] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.598760] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.624061] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.629725] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.634082] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config buildbot # [ 1.641844] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.655697] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.683745] systemd[1]: Started Journal Service. buildbot # [ 1.550233] systemd-modules-load[68]: Inserted module 'dm_mod' buildbot # [ 1.551617] systemd-modules-load[68]: Inserted module 'virtio_balloon' buildbot # [ 1.555448] systemd-modules-load[68]: Inserted module 'virtio_gpu' buildbot # [ 1.560129] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.563068] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.569651] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.590978] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.591938] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.592861] systemd[1]: Reached target Local File Systems. buildbot # [ 1.594241] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.602076] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.625266] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.645417] systemd-udevd[83]: Using default interface naming scheme 'v260'. buildbot # [ 1.672327] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.727683] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 1.728610] systemd[1]: Reached target System Initialization. buildbot # [ 1.729399] systemd[1]: Reached target Basic System. buildbot # [ 2.038243] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 buildbot # [ 2.061301] serio: i8042 KBD port at 0x60,0x64 irq 1 buildbot # [ 2.062007] serio: i8042 AUX port at 0x60,0x64 irq 12 buildbot # [ 2.080680] uhci_hcd 0000:00:01.2: UHCI Host Controller buildbot # [ 2.081435] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 buildbot # [ 2.089191] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 2.102667] uhci_hcd 0000:00:01.2: detected 2 ports buildbot # [ 2.103461] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100 buildbot # [ 2.110588] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 2.120661] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 buildbot # [ 2.121808] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 buildbot # [ 2.128055] SCSI subsystem initialized buildbot # [ 2.137992] usb usb1: Product: UHCI Host Controller buildbot # [ 2.141784] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd buildbot # [ 2.142547] usb usb1: SerialNumber: 0000:00:01.2 buildbot # [ 2.153095] hub 1-0:1.0: USB hub found buildbot # [ 2.158143] hub 1-0:1.0: 2 ports detected buildbot # [ 2.038924] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.046069] systemd[1]: Starting Virtual Console Setup... buildbot # [ 2.185368] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 buildbot # [ 2.061690] (udev-worker)[91]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.065061] (udev-worker)[91]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.082271] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 2.085172] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.102858] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.107463] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.109137] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.268913] scsi host0: ata_piix buildbot # [ 2.271596] scsi host1: ata_piix buildbot # [ 2.272910] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0 buildbot # [ 2.277817] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0 buildbot # [ 2.144472] systemd-fsck[111]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.150094] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.385783] usb 1-1: new full-speed USB device number 2 using uhci_hcd buildbot # [ 2.434358] ata2: found unknown device (class 0) buildbot # [ 2.437213] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 buildbot # [ 2.441977] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 buildbot # [ 2.488088] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray buildbot # [ 2.496875] cdrom: Uniform CD-ROM driver Revision: 3.20 buildbot # [ 2.405659] systemd[1]: Mounting /sysroot... buildbot # [ 2.554818] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 buildbot # [ 2.555990] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 buildbot # [ 2.558939] usb 1-1: Product: QEMU USB Tablet buildbot # [ 2.559561] usb 1-1: Manufacturer: QEMU buildbot # [ 2.561643] usb 1-1: SerialNumber: 28754-0000:00:01.2-1 buildbot # [ 2.600501] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 2.622400] usbcore: registered new interface driver usbhid buildbot # [ 2.626192] usbhid: USB HID core driver buildbot # [ 2.652939] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 buildbot # [ 2.656895] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 buildbot # [ 2.676876] EXT4-fs (vda): mounted filesystem 021ad04c-2ea6-42f5-a4d4-9fa33647dd78 r/w with ordered data mode. Quota mode: none. buildbot # [ 2.544339] systemd[1]: Mounted /sysroot. buildbot # [ 2.545536] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.549101] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 2.552132] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 2.555126] systemd[1]: Mounting /sysroot/run... buildbot # [ 2.560869] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 2.564810] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 2.572127] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.727915] 9p: Installing v9fs 9p2000 file system support buildbot # [ 2.600476] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 2.602023] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 2.604615] systemd[1]: Mounted /sysroot/run. buildbot # [ 2.608466] systemd-sysroot-fstab-check[133]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 2.611197] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 2.613873] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 2.616996] systemd[1]: Reload requested from client PID 133 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 2.619128] systemd[1]: Reloading... buildbot # [ 2.686165] systemd[1]: Reloading finished in 67 ms. buildbot # [ 2.692645] systemd-sysroot-fstab-check[133]: Requesting initrd-fs.target/start/replace... buildbot # [ 2.695190] systemd-sysroot-fstab-check[133]: Requesting swap.target/start/replace... buildbot # [ 2.696968] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 2.700473] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 2.702128] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 2.703157] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 2.713311] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 2.714740] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.407510] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.451308] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.454224] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.458145] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.462126] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.486514] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.489097] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 3.496510] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.498156] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.499163] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.512866] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.514047] systemd[1]: Stopped target Basic System. buildbot # [ 3.515164] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.515975] systemd[1]: Stopped target Path Units. buildbot # [ 3.516731] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.517893] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.519337] systemd[1]: Stopped target Slice Units. buildbot # [ 3.521207] systemd[1]: Stopped target Socket Units. buildbot # [ 3.521895] systemd[1]: Stopped target System Initialization. buildbot # [ 3.522679] systemd[1]: Stopped target Swaps. buildbot # [ 3.523299] systemd[1]: Stopped target Timer Units. buildbot # [ 3.524124] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.524891] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.525680] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.527104] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.528192] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 3.530052] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.531145] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.532284] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.534241] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.535385] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.536470] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.538122] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.539131] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.540209] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.541063] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.543105] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.544019] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.545105] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.547127] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.549123] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.550104] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.556354] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.561440] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.565411] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.567272] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.568700] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.570226] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.572917] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.573934] systemd[1]: Closed udev Control Socket. buildbot # [ 3.574866] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.575651] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.576702] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.578222] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.579404] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.580442] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.581430] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.594916] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.596263] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.597523] systemd[1]: Reached target Switch Root. buildbot # [ 3.599259] systemd[1]: Starting NixOS Activation... buildbot # [ 3.776331] initrd-nixos-activation-start[177]: booting system configuration /nix/store/m8wyrzw5cs777vrgv6dhnx8dnl5sha8h-nixos-system-buildbot-test buildbot # [ 3.848452] initrd-nixos-activation-start[177]: running activation script... buildbot # [ 4.314909] initrd-nixos-activation-start[200]: setting up /etc... buildbot # [ 4.594765] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.597056] systemd[1]: Finished NixOS Activation. buildbot # [ 4.598197] systemd[1]: Starting Switch Root... buildbot # [ 4.610843] systemd[1]: Switching root. buildbot # [ 4.763082] systemd-journald[67]: Received SIGTERM from PID 1 (systemd). buildbot # [ 4.936665] NET: Registered PF_VSOCK protocol family buildbot # [ 5.327363] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.337146] systemd[1]: Detected virtualization kvm. buildbot # [ 5.338958] systemd[1]: Detected architecture x86-64. buildbot # [ 5.340814] systemd[1]: Detected first boot. buildbot # [ 5.349814] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.626486] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 5.766122] systemd[1]: Applying preset policy. buildbot # [ 6.463321] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 7.241577] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 7.242988] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 7.246527] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 7.248408] systemd[1]: Created slice Slice /system/getty. buildbot # [ 7.249783] systemd[1]: Created slice User and Session Slice. buildbot # [ 7.250728] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 7.251956] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 7.253032] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 7.253760] systemd[1]: Expecting device /dev/ttyS0... buildbot # [ 7.254496] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 7.255337] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 7.256070] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 7.256862] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 7.257739] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 7.258656] systemd[1]: Reached target Path Units. buildbot # [ 7.259362] systemd[1]: Reached target Remote File Systems. buildbot # [ 7.260136] systemd[1]: Reached target Slice Units. buildbot # [ 7.260839] systemd[1]: Reached target Swaps. buildbot # [ 7.264666] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 7.269725] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.273318] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.277023] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.281870] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.283393] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.287319] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.288462] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.289639] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.291254] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.303899] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.305000] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.305884] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.312487] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.316117] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.319704] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.326407] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.334691] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.336469] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 7.342940] systemd[1]: Starting Load Kernel Module configfs... buildbot # [ 7.346527] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.351382] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.352999] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse buildbot # [ 7.362249] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.363201] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.373250] systemd[1]: Starting Journal Service... buildbot # [ 7.393170] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.421926] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.444128] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.447796] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.456487] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.478252] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.488340] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.489638] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.495058] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.496781] loop: module loaded buildbot # [ 7.499275] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.507688] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.512155] systemd[1]: modprobe@configfs.service: Deactivated successfully. buildbot # [ 7.520787] systemd[1]: Finished Load Kernel Module configfs. buildbot # [ 7.524081] systemd-journald[269]: Collecting audit messages is enabled. buildbot # [ 7.525367] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.533727] EXT4-fs (vda): re-mounted 021ad04c-2ea6-42f5-a4d4-9fa33647dd78. buildbot # [ 7.539932] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.556754] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.423265] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.424446] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.425676] systemd-modules-load[270]: Inserted module 'loop' buildbot # [ 7.427296] systemd-modules-load[270]: Inserted module 'tls' buildbot # [ 7.572262] systemd[1]: Started Journal Service. buildbot # [ 7.447556] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.454241] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.458752] systemd-oomd[271]: No swap; memory pressure usage will be degraded buildbot # [ 7.475831] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.480080] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.486181] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.487411] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.495065] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.498522] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.500076] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.521864] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.701328] systemd-journald[269]: Received client request to flush runtime journal. buildbot # [ 7.659329] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.662456] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.663780] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.666141] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.667121] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 7.669110] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.721749] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 7.723325] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 7.729213] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 7.753738] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 7.823817] systemd-udevd[301]: Using default interface naming scheme 'v260'. buildbot # [ 7.979910] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.070042] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse buildbot # [ 8.112220] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.119233] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 8.144657] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. buildbot # [ 8.163640] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.164928] systemd[1]: Reached target Local File Systems. buildbot # [ 8.170085] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.173586] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.177842] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.178859] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.187332] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.198035] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.202244] (udev-worker)[304]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 8.203748] (udev-worker)[306]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 8.206530] (udev-worker)[306]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 8.287736] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.295140] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.349590] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.357482] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.363891] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.449084] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.455473] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 8.457209] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 8.459891] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.462214] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 8.465168] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 8.467458] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.469662] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 8.494510] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.500786] systemd[1]: Starting Update is Completed... buildbot # [ 8.551392] systemd[1]: Finished Update is Completed. buildbot # [ 8.764529] mousedev: PS/2 mouse device common for all mice buildbot # [ 8.770308] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 buildbot # [ 8.787996] ACPI: button: Power Button [PWRF] buildbot # [ 8.850321] rtc_cmos 00:05: RTC can wake from S4 buildbot # [ 8.875268] parport_pc 00:03: reported by Plug and Play ACPI buildbot # [ 8.879745] Floppy drive(s): fd0 is 2.88M AMI BIOS buildbot # [ 8.893218] rtc_cmos 00:05: registered as rtc0 buildbot # [ 8.897315] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] buildbot # [ 8.901461] FDC 0 is a S82078B buildbot # [ 8.903955] rtc_cmos 00:05: setting system clock to 2026-10-04T07:41:39 UTC (1791099699) buildbot # [ 8.905341] systemd-journald[269]: Time jumped backwards, rotating. buildbot # [ 8.926477] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs buildbot # [ 8.817951] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 8.823418] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 8.978475] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console buildbot # [ 8.987453] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4 buildbot # [ 9.017091] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 buildbot # [ 9.017151] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD buildbot # [ 9.073901] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 buildbot # [ 9.074175] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 buildbot # [ 9.094074] Console: switching to colour dummy device 80x25 buildbot # [ 9.136399] [drm] Found bochs VGA, ID 0xb0c5. buildbot # [ 9.136401] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. buildbot # [ 9.144382] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic buildbot # [ 9.145156] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0 buildbot # [ 9.011783] systemd[1]: Starting Virtual Console Setup... buildbot # [ 9.204781] fbcon: bochs-drmdrmfb (fb0) is primary device buildbot # [ 9.237733] ppdev: user-space parallel port driver buildbot # [ 9.261383] Console: switching to colour frame buffer device 160x50 buildbot # [ 9.294562] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device buildbot # [ 9.173326] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 9.175854] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 9.185120] systemd[1]: Starting Virtual Console Setup... buildbot # [ 9.217470] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 9.220065] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 9.229061] systemd[1]: Starting Virtual Console Setup... buildbot # [ 9.468832] kvm_amd: TSC scaling supported buildbot # [ 9.469358] kvm_amd: Nested Virtualization enabled buildbot # [ 9.470241] kvm_amd: Nested Paging enabled buildbot # [ 9.470798] kvm_amd: LBR virtualization supported buildbot # [ 9.471312] kvm_amd: Virtual VMLOAD VMSAVE supported buildbot # [ 9.472019] kvm_amd: Virtual GIF supported buildbot # [ 9.472454] kvm_amd: Virtual NMI enabled buildbot # [ 9.356599] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.516052] EDAC MC: Ver: 3.0.0 buildbot # [ 9.908267] systemd-vconsole-setup[404]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 9.913260] systemd[1]: Finished Virtual Console Setup. buildbot # [ 9.914053] systemd[1]: Reached target System Initialization. buildbot # [ 9.916182] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.917564] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.919070] systemd[1]: Reached target Timer Units. buildbot # [ 9.919783] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.920752] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.924067] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.925212] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.926140] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.927335] systemd[1]: Reached target Socket Units. buildbot # [ 9.928103] systemd[1]: Reached target Basic System. buildbot # [ 9.931409] systemd[1]: Started backdoor.service. buildbot # [ 9.935598] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.938313] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.941714] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.946075] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.955577] systemd[1]: Starting resolvconf update... buildbot # [ 9.956363] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.975146] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 10.023324] systemd[1]: Finished Post-Boot Actions. buildbot # connecting to host... buildbot # [ 10.056584] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.059406] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.060269] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.062324] nsncd[411]: Oct 04 07:41:40.787 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.070666] systemd[1]: Starting User Login Management... buildbot # [ 10.076177] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 10.81 seconds) buildbot: (finished: waiting for the VM to finish booting, in 11.09 seconds) buildbot # [ 10.150469] dbus-broker-launch[416]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 10.188061] systemd-logind[436]: New seat seat0. buildbot # [ 10.192294] dbus-broker-launch[416]: NSS returned no entry for 'systemd-timesync' buildbot # [ 10.194287] dbus-broker-launch[416]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 10.196720] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 10.197770] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 10.200167] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 10.202527] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 10.203846] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 10.206180] systemd-logind[436]: Watching system buttons on /dev/input/event2 (Power Button) buildbot # [ 10.207857] systemd-logind[436]: Watching system buttons on /dev/input/event5 (QEMU Virtio Keyboard) buildbot # [ 10.209753] systemd-logind[436]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) buildbot # [ 10.211852] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 10.213470] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 10.222464] systemd[1]: Started User Login Management. buildbot # [ 10.237153] systemd[1]: Starting linger-users.service... buildbot # [ 10.245221] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.256404] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 10.298839] dbus-broker-launch[416]: Ready buildbot # [ 10.308692] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.310521] systemd[1]: Finished linger-users.service. buildbot # [ 10.320873] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.321818] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.322703] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.324609] nsncd[486]: Oct 04 07:41:41.056 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.346634] systemd[1]: Finished resolvconf update. buildbot # [ 10.348233] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.352961] systemd[1]: Starting DHCP Client... buildbot # [ 10.357099] systemd[1]: Starting Address configuration of eth1... buildbot # [ 10.359757] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.479202] network-addresses-eth1-start[515]: adding address 192.168.1.1/24... done buildbot # [ 10.498594] network-addresses-eth1-start[515]: adding address 2001:db8:1::1/64... done buildbot # [ 10.520136] systemd[1]: Finished Address configuration of eth1. buildbot # [ 10.523964] dhcpcd[523]: dhcpcd-10.3.2 starting buildbot # [ 10.540339] dhcpcd[571]: dev: loaded udev buildbot # [ 10.543339] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.545508] systemd[1]: Reached target Network. buildbot # [ 10.550545] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.554721] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.559488] systemd[1]: Starting SSH Daemon... buildbot # [ 10.565546] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.717225] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 10.722631] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 10.646245] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.654244] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 10.664981] systemd[1]: Started Getty on tty1. buildbot # [ 10.665837] systemd[1]: Reached target Login Prompts. buildbot # [ 10.700454] sshd[577]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.702545] sshd[577]: Server listening on :: port 22. buildbot # [ 10.704090] systemd[1]: Started SSH Daemon. buildbot # [ 10.710583] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.897253] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 10.933767] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 10.934513] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 10.937947] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 10.938839] cfg80211: failed to load regulatory.db buildbot # [ 10.861698] setup-git-repo-start[597]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.864418] setup-git-repo-start[597]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.865713] setup-git-repo-start[597]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.867098] setup-git-repo-start[597]: hint: call: buildbot # [ 10.868679] setup-git-repo-start[597]: hint: buildbot # [ 10.869356] setup-git-repo-start[597]: hint: git config --global init.defaultBranch buildbot # [ 10.871168] setup-git-repo-start[597]: hint: buildbot # [ 10.872304] setup-git-repo-start[597]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.874412] setup-git-repo-start[597]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.876170] setup-git-repo-start[597]: hint: buildbot # [ 10.876762] setup-git-repo-start[597]: hint: git branch -m buildbot # [ 10.878134] setup-git-repo-start[597]: hint: buildbot # [ 10.879294] setup-git-repo-start[597]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.880891] setup-git-repo-start[597]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 11.030411] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 10.897123] dhcpcd[571]: eth0: waiting for carrier buildbot # [ 10.898238] dhcpcd[571]: eth0: carrier acquired buildbot # [ 10.916051] dhcpcd[571]: DUID 00:01:00:01:32:54:bf:b5:52:54:00:12:34:56 buildbot # [ 10.917654] dhcpcd[571]: eth0: IAID 00:12:34:56 buildbot # [ 10.919026] dhcpcd[571]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 10.924247] postgresql-pre-start[591]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 10.925785] postgresql-pre-start[591]: This user must also own the server process. buildbot # [ 10.937900] postgresql-pre-start[591]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 10.939216] postgresql-pre-start[591]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 10.940385] postgresql-pre-start[591]: The default text search configuration will be set to "english". buildbot # [ 10.941509] postgresql-pre-start[591]: Data page checksums are disabled. buildbot # [ 10.942369] postgresql-pre-start[591]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 10.944223] postgresql-pre-start[591]: creating subdirectories ... ok buildbot # [ 10.945665] postgresql-pre-start[591]: selecting dynamic shared memory implementation ... posix buildbot # [ 10.954666] nginx-pre-start[588]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok buildbot # [ 10.956421] nginx-pre-start[588]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful buildbot # [ 10.960696] setup-git-repo-start[610]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.962104] setup-git-repo-start[610]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.963483] setup-git-repo-start[610]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.965739] setup-git-repo-start[610]: hint: call: buildbot # [ 10.966404] setup-git-repo-start[610]: hint: buildbot # [ 10.966962] setup-git-repo-start[610]: hint: git config --global init.defaultBranch buildbot # [ 10.968125] setup-git-repo-start[610]: hint: buildbot # [ 10.968776] setup-git-repo-start[610]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.971505] setup-git-repo-start[610]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.973135] setup-git-repo-start[610]: hint: buildbot # [ 10.974831] setup-git-repo-start[610]: hint: git branch -m buildbot # [ 10.976264] setup-git-repo-start[610]: hint: buildbot # [ 10.977269] setup-git-repo-start[610]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.978682] setup-git-repo-start[610]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 10.983633] systemd[1]: Started Nginx Web Server. buildbot # [ 11.065165] setup-git-repo-start[621]: [master (root-commit) 390234b] Initial commit with scheduled effects buildbot # [ 11.066822] setup-git-repo-start[621]: 3 files changed, 131 insertions(+) buildbot # [ 11.067965] setup-git-repo-start[621]: create mode 100644 effects-lib.nix buildbot # [ 11.069232] setup-git-repo-start[621]: create mode 100644 flake.lock buildbot # [ 11.070241] setup-git-repo-start[621]: create mode 100644 flake.nix buildbot # [ 11.100523] postgresql-pre-start[591]: selecting default "max_connections" ... 100 buildbot # [ 11.178831] postgresql-pre-start[591]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.189605] setup-git-repo-start[626]: To /srv/repos/test-flake.git buildbot # [ 11.190710] setup-git-repo-start[626]: * [new branch] master -> master buildbot # [ 11.192299] setup-git-repo-start[626]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.196780] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot: (finished: waiting for unit sshd.service, in 12.37 seconds) buildbot # [ 11.371304] dhcpcd[571]: eth0: soliciting a DHCP lease buildbot: waiting for unit setup-git-repo.service buildbot # [ 11.533104] NET: Registered PF_PACKET protocol family buildbot # [ 11.401676] dhcpcd[571]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 11.404364] dhcpcd[571]: eth0: probing address 10.0.2.15/24 buildbot: (finished: waiting for unit setup-git-repo.service, in 0.09 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 13.563626] dhcpcd[571]: eth0: soliciting an IPv6 router buildbot # [ 13.565134] dhcpcd[571]: eth0: Router Advertisement from fe80::2 buildbot # [ 13.565990] dhcpcd[571]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 13.566926] dhcpcd[571]: eth0: adding route to fec0::/64 buildbot # [ 13.567802] dhcpcd[571]: eth0: adding default route via fe80::2 buildbot # [ 14.155290] postgresql-pre-start[591]: selecting default time zone ... UTC buildbot # [ 14.161052] postgresql-pre-start[591]: creating configuration files ... ok buildbot # [ 14.419523] postgresql-pre-start[591]: running bootstrap script ... ok buildbot # [ 15.120513] postgresql-pre-start[591]: performing post-bootstrap initialization ... ok buildbot # [ 15.260368] postgresql-pre-start[591]: syncing data to disk ... ok buildbot # [ 15.262122] postgresql-pre-start[591]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 15.263417] postgresql-pre-start[591]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 15.265280] postgresql-pre-start[591]: Success. You can now start the database server using: buildbot # [ 15.266328] postgresql-pre-start[591]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 15.400607] postgres[698]: [698] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 15.418299] postgres[698]: [698] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 15.419303] postgres[698]: [698] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 15.422359] postgres[698]: [698] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 15.436538] postgres[704]: [704] LOG: database system was shut down at 2026-10-04 07:41:45 GMT buildbot # [ 15.445625] postgres[698]: [698] LOG: database system is ready to accept connections buildbot # [ 15.453477] systemd[1]: Started PostgreSQL Server. buildbot # [ 15.458338] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 15.640367] dhcpcd[571]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 15.641292] dhcpcd[571]: eth0: adding route to 10.0.2.0/24 buildbot # [ 15.643111] dhcpcd[571]: eth0: adding default route via 10.0.2.2 buildbot # [ 15.689074] postgresql-setup-start[715]: CREATE DATABASE buildbot # [ 15.757344] postgresql-setup-start[746]: CREATE ROLE buildbot # [ 15.787158] postgresql-setup-start[759]: ALTER DATABASE buildbot # [ 15.792040] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 15.795240] systemd[1]: Reached target PostgreSQL. buildbot # [ 15.798109] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 15.803117] systemd[1]: Started DHCP Client. buildbot # [ 15.865189] buildbot-master-pre-start[773]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 24.559255] buildbot-master-pre-start[775]: updating existing installation buildbot # [ 24.561158] buildbot-master-pre-start[775]: not touching existing buildbot.tac buildbot # [ 24.562077] buildbot-master-pre-start[775]: creating buildbot.tac.new instead buildbot # [ 24.562920] buildbot-master-pre-start[775]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 24.563998] buildbot-master-pre-start[775]: creating database (postgresql://@/buildbot) buildbot # [ 24.565024] buildbot-master-pre-start[775]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 24.745544] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 24.751552] systemd[1]: Started Buildbot Worker.. buildbot # [ 24.754307] systemd[1]: Reached target Multi-User System. buildbot # [ 24.756359] systemd[1]: Startup finished in 830ms (kernel) + 3.904s (initrd) + 20.021s (userspace) = 24.756s. buildbot: (finished: waiting for unit multi-user.target, in 13.32 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.07 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 26.534117] twistd[861]: Starting worker local-worker-000 buildbot # [ 26.534975] twistd[861]: 2026-10-04T07:41:56+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 26.536510] twistd[861]: 2026-10-04T07:41:57+0000 [-] Loaded. buildbot # [ 26.537402] twistd[861]: 2026-10-04T07:41:57+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 26.539659] twistd[861]: 2026-10-04T07:41:57+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 26.541393] twistd[861]: 2026-10-04T07:41:57+0000 [-] Starting Worker -- version: 2026.06.26 buildbot # [ 26.542610] twistd[861]: 2026-10-04T07:41:57+0000 [-] recording hostname in twistd.hostname buildbot # [ 26.543905] twistd[861]: 2026-10-04T07:41:57+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.554178] twistd[861]: 2026-10-04T07:41:57+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 1.8933918480477905 seconds. buildbot # [ 26.556743] twistd[861]: 2026-10-04T07:41:57+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 28.453648] twistd[861]: 2026-10-04T07:41:59+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 28.457612] twistd[861]: 2026-10-04T07:41:59+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.9568263199974676 seconds. buildbot # [ 28.460131] twistd[861]: 2026-10-04T07:41:59+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 29.213839] twistd[860]: 2026-10-04T07:41:56+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 29.215252] twistd[860]: 2026-10-04T07:41:59+0000 [-] Loaded. buildbot # [ 29.216216] twistd[860]: 2026-10-04T07:41:59+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 29.218469] twistd[860]: 2026-10-04T07:41:59+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 29.220335] twistd[860]: 2026-10-04T07:41:59+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 29.234921] twistd[860]: 2026-10-04T07:41:59+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg' buildbot # [ 30.477556] twistd[860]: 2026-10-04T07:42:01+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 30.592462] twistd[860]: 2026-10-04T07:42:01+0000 [-] adding 9 new builders, removing 0 buildbot # [ 30.686738] twistd[860]: 2026-10-04T07:42:01+0000 [-] adding 3 new services, removing 0 buildbot # [ 30.828575] twistd[860]: 2026-10-04T07:42:01+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 30.832340] twistd[860]: 2026-10-04T07:42:01+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 30.840059] twistd[860]: 2026-10-04T07:42:01+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 30.990872] twistd[860]: 2026-10-04T07:42:01+0000 [-] BuildbotSite starting on 8010 buildbot # [ 30.992188] twistd[860]: 2026-10-04T07:42:01+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 30.994502] twistd[860]: 2026-10-04T07:42:01+0000 [-] adding 5 new workers, removing 0 buildbot # [ 31.005478] twistd[860]: 2026-10-04T07:42:01+0000 [-] PBServerFactory starting on 9989 buildbot # [ 31.006545] twistd[860]: 2026-10-04T07:42:01+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 31.048620] twistd[860]: 2026-10-04T07:42:01+0000 [-] Starting Worker -- version: 2026.06.26 buildbot # [ 31.049773] twistd[860]: 2026-10-04T07:42:01+0000 [-] recording hostname in twistd.hostname buildbot # [ 31.050781] twistd[860]: 2026-10-04T07:42:01+0000 [-] message from master: attached buildbot # [ 31.053675] twistd[860]: 2026-10-04T07:42:01+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 31.063061] twistd[860]: 2026-10-04T07:42:01+0000 [-] bot attached buildbot # [ 31.064969] twistd[860]: 2026-10-04T07:42:01+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 31.066200] twistd[860]: 2026-10-04T07:42:01+0000 [-] message from master: attached buildbot # [ 31.092950] twistd[860]: 2026-10-04T07:42:01+0000 [-] BuildMaster is running buildbot # [ 31.191346] sshd-session[925]: Accepted publickey for root from ::1 port 34786 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 31.206142] sshd-session[925]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 31.260228] systemd[1]: Created slice Slice /user/0. buildbot # [ 31.263346] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 31.279194] systemd-logind[436]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 31.341885] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 31.346973] systemd[1]: Starting User Manager for UID 0... buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 6.43 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 31.393735] (systemd)[935]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 31.399766] systemd-logind[436]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 31.418182] twistd[861]: 2026-10-04T07:42:02+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 31.425389] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=41286) buildbot # [ 31.429456] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.437147] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 31.449084] twistd[860]: 2026-10-04T07:42:02+0000 [-] bot attached buildbot # [ 31.455793] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 31.460060] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 31.461506] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 31.462890] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 31.464311] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 31.465817] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 31.467119] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 31.468520] twistd[860]: 2026-10-04T07:42:02+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 31.470356] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.471760] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.474194] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.475970] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.479089] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.480143] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.481182] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.482249] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] message from master: attached buildbot # [ 31.496796] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 31.498199] twistd[861]: 2026-10-04T07:42:02+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.38 seconds) (finished: subtest: Master and worker services start, in 6.95 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 10170 0 0100 266 100 266 0 0 7985 0 0100 266 100 266 0 0 6639 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.13 seconds) (finished: subtest: Project is registered, in 0.13 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot # [ 31.920097] systemd[935]: Queued start job for default target Main User Target. buildbot # [ 31.923688] systemd[935]: Created slice User Application Slice. buildbot # [ 31.924598] systemd[935]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 31.925658] systemd[935]: Reached target Paths. buildbot # [ 31.927163] systemd[935]: Reached target Timers. buildbot # [ 31.929695] systemd[935]: Starting D-Bus User Message Bus Socket... buildbot # [ 31.932722] systemd[935]: Starting Create User Files and Directories... buildbot # [ 31.975156] systemd[935]: Finished Create User Files and Directories. buildbot # [ 32.058204] systemd[935]: Listening on D-Bus User Message Bus Socket. buildbot # [ 32.061101] systemd[935]: Reached target Sockets. buildbot # [ 32.061785] systemd[935]: Reached target Basic System. buildbot # [ 32.062791] systemd[935]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 32.065158] systemd[935]: Reached target Main User Target. buildbot # [ 32.065956] systemd[935]: Startup finished in 623ms. buildbot # [ 32.068314] systemd[1]: Started User Manager for UID 0. buildbot # [ 32.069481] systemd[1]: Started Session 1 of User root. buildbot # [ 32.123641] sshd-session[964]: Received disconnect from ::1 port 34786:11: disconnected by user buildbot # [ 32.124856] sshd-session[964]: Disconnected from user root ::1 port 34786 buildbot # [ 32.126397] sshd-session[925]: pam_unix(sshd:session): session closed for user root buildbot # [ 32.134700] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 32.136989] systemd-logind[436]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 32.140066] systemd-logind[436]: Removed session 1. buildbot # [ 32.326232] sshd-session[974]: Accepted publickey for root from ::1 port 34790 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 32.339861] sshd-session[974]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 32.349622] systemd-logind[436]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 32.351335] systemd[1]: Started Session 3 of User root. buildbot # [ 32.419041] sshd-session[980]: Received disconnect from ::1 port 34790:11: disconnected by user buildbot # [ 32.421833] sshd-session[980]: Disconnected from user root ::1 port 34790 buildbot # [ 32.423913] sshd-session[974]: pam_unix(sshd:session): session closed for user root buildbot # [ 32.430055] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 32.433306] systemd-logind[436]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 32.436138] systemd-logind[436]: Removed session 3. buildbot # [ 32.463716] twistd[860]: 2026-10-04T07:42:03+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.63 seconds) (finished: subtest: CLI list-schedules works, in 0.63 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 296.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 390234b..f3be4f4 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.13 seconds) (finished: subtest: Push a new commit to trigger build, in 0.13 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2573 0 0100 51 100 51 0 0 2083 0 0100 51 100 51 0 0 1756 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.09 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1799 0 0100 51 100 51 0 0 1534 0 0100 51 100 51 0 0 1350 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1856 0 0100 51 100 51 0 0 1581 0 0100 51 100 51 0 0 1383 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2035 0 0100 51 100 51 0 0 1710 0 0100 51 100 51 0 0 1481 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2868 0 0100 51 100 51 0 0 2263 0 0100 51 100 51 0 0 1884 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1918 0 0100 51 100 51 0 0 1626 0 0100 51 100 51 0 0 1418 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2042 0 0100 51 100 51 0 0 1726 0 0100 51 100 51 0 0 1476 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1989 0 0100 51 100 51 0 0 1676 0 0100 51 100 51 0 0 1456 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 41.098772] sshd-session[1039]: Accepted publickey for root from ::1 port 57534 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 41.121278] sshd-session[1039]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 41.136433] systemd-logind[436]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 41.139549] systemd[1]: Started Session 4 of User root. buildbot # [ 41.180934] sshd-session[1042]: Received disconnect from ::1 port 57534:11: disconnected by user buildbot # [ 41.182191] sshd-session[1042]: Disconnected from user root ::1 port 57534 buildbot # [ 41.183622] sshd-session[1039]: pam_unix(sshd:session): session closed for user root buildbot # [ 41.192695] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 41.197426] systemd-logind[436]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 41.198888] systemd-logind[436]: Removed session 4. buildbot # [ 41.401387] sshd-session[1047]: Accepted publickey for root from ::1 port 57550 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 41.423079] sshd-session[1047]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 41.437340] systemd-logind[436]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 41.440360] systemd[1]: Started Session 5 of User root. buildbot # [ 41.493952] sshd-session[1050]: Received disconnect from ::1 port 57550:11: disconnected by user buildbot # [ 41.495787] sshd-session[1050]: Disconnected from user root ::1 port 57550 buildbot # [ 41.496965] sshd-session[1047]: pam_unix(sshd:session): session closed for user root buildbot # [ 41.504072] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 41.507759] systemd-logind[436]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 41.509584] systemd-logind[436]: Removed session 5. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 41.530132] twistd[860]: 2026-10-04T07:42:12+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 41.566211] twistd[860]: 2026-10-04T07:42:12+0000 [-] gitpoller: processing 1 changes: ['f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1131 0 0100 51 100 51 0 0 984 0 0100 51 100 51 0 0 865 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 41.677084] twistd[860]: 2026-10-04T07:42:12+0000 [-] added change with revision f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2008 0 0100 51 100 51 0 0 1689 0 0100 51 100 51 0 0 1463 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1921 0 0100 51 100 51 0 0 1614 0 0100 51 100 51 0 0 1410 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2001 0 0100 51 100 51 0 0 1673 0 0100 51 100 51 0 0 1449 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2039 0 0100 51 100 51 0 0 1723 0 0100 51 100 51 0 0 1493 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot # [ 46.721186] twistd[860]: 2026-10-04T07:42:17+0000 [-] added buildset 1 to database buildbot # [ 46.867593] twistd[860]: 2026-10-04T07:42:17+0000 [-] starting build using worker buildbot # [ 46.874143] twistd[860]: 2026-10-04T07:42:17+0000 [-] .startBuild buildbot # [ 46.941821] twistd[860]: 2026-10-04T07:42:17+0000 [-] acquireLocks(worker , locks []) buildbot # [ 46.945980] twistd[860]: 2026-10-04T07:42:17+0000 [-] starting build .. pinging the worker buildbot # [ 46.948272] twistd[860]: 2026-10-04T07:42:17+0000 [-] sending ping buildbot # [ 46.949757] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] message from master: ping buildbot # [ 46.951241] twistd[860]: 2026-10-04T07:42:17+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 46.972488] twistd[860]: 2026-10-04T07:42:17+0000 [-] : RemoteCommand.run [0] buildbot # [ 46.973783] twistd[860]: 2026-10-04T07:42:17+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 46.976052] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 46.977169] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 46.978500] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 46.982701] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 46.984657] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 46.985928] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 46.987267] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 47.002612] twistd[861]: 2026-10-04T07:42:17+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.020972 buildbot # [ 47.004446] twistd[861]: 2026-10-04T07:42:17+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 47.033767] twistd[860]: 2026-10-04T07:42:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.070911] twistd[860]: 2026-10-04T07:42:17+0000 [-] : RemoteCommand.run [1] buildbot # [ 47.077061] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 47.078152] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 47.080960] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 47.083403] twistd[860]: 2026-10-04T07:42:17+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 47.098711] twistd[860]: 2026-10-04T07:42:17+0000 [-] : RemoteCommand.run [2] buildbot # [ 47.127069] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 47.128214] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 47.130757] twistd[860]: 2026-10-04T07:42:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 47.138731] twistd[860]: 2026-10-04T07:42:17+0000 [-] : RemoteCommand.run [3] buildbot # [ 47.173979] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 47.177099] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 47.180149] twistd[860]: 2026-10-04T07:42:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.188105] twistd[860]: 2026-10-04T07:42:17+0000 [-] : RemoteCommand.run [4] buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 23379 0 0100 401 100 401 0 0 18318 0 0100 401 100 401 0 0 15162 [ 47.227157] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 47.228304] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 47.230176] twistd[860]: 2026-10-04T07:42:17+0000 [Broker,0,127.0.0.1] rc=0 buildbot # 0 0 buildbot # [ 47.239277] twistd[860]: 2026-10-04T07:42:17+0000 [-] No git repo present, making full clone buildbot # [ 47.241470] twistd[860]: 2026-10-04T07:42:17+0000 [-] : RemoteCommand.run [5] buildbot # [ 47.245187] twistd[860]: 2026-10-04T07:42:17+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) buildbot # [ 47.265821] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 47.267266] twistd[861]: 2026-10-04T07:42:17+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 47.270707] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 47.292301] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.296302] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 47.299529] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 47.304868] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 47.519850] sshd-session[1088]: Accepted publickey for root from ::1 port 59016 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 47.540340] sshd-session[1088]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 47.553347] systemd-logind[436]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 47.556494] systemd[1]: Started Session 6 of User root. buildbot # [ 47.617873] sshd-session[1091]: Received disconnect from ::1 port 59016:11: disconnected by user buildbot # [ 47.619166] sshd-session[1091]: Disconnected from user root ::1 port 59016 buildbot # [ 47.620745] sshd-session[1088]: pam_unix(sshd:session): session closed for user root buildbot # [ 47.627574] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 47.630755] systemd-logind[436]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 47.632523] systemd-logind[436]: Removed session 6. buildbot # [ 47.650082] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.373019 buildbot # [ 47.653693] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 47.657489] twistd[860]: 2026-10-04T07:42:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.682601] twistd[860]: 2026-10-04T07:42:18+0000 [-] : RemoteCommand.run [6] buildbot # [ 47.685551] twistd[860]: 2026-10-04T07:42:18+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']' in dir 'build' buildbot # [ 47.702840] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 47.704253] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): RunProcess._startCommand buildbot # [ 47.707454] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0 buildbot # [ 47.712155] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.717054] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): watching logfiles {} buildbot # [ 47.719968] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0'] buildbot # [ 47.724541] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): using PTY: False buildbot # [ 47.748864] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0']): command finished with signal None, exit code 0, elapsedTime: 0.032666 buildbot # [ 47.752371] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 47.770908] twistd[860]: 2026-10-04T07:42:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 47.794564] twistd[860]: 2026-10-04T07:42:18+0000 [-] : RemoteCommand.run [7] buildbot # [ 47.797407] twistd[860]: 2026-10-04T07:42:18+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 47.816058] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 47.817255] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 47.820279] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 47.824516] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 47.829484] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 47.832287] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 47.836790] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 47.983956] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.155143 buildbot # [ 47.987541] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 47.991391] twistd[860]: 2026-10-04T07:42:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.008492] twistd[860]: 2026-10-04T07:42:18+0000 [-] : RemoteCommand.run [8] buildbot # [ 48.009882] twistd[860]: 2026-10-04T07:42:18+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 48.037113] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 48.038394] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 48.039948] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 48.041496] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 48.045050] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 48.046407] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 48.047968] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 48.062692] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.018698 buildbot # [ 48.064577] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 48.092076] twistd[860]: 2026-10-04T07:42:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.114306] twistd[860]: 2026-10-04T07:42:18+0000 [-] Got Git revision f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0 buildbot # [ 48.116077] twistd[860]: 2026-10-04T07:42:18+0000 [-] : RemoteCommand.run [9] buildbot # [ 48.135784] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 48.137299] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 48.139408] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 48.141944] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 48.145763] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 48.147702] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 48.150274] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 48.167186] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.022464 buildbot # [ 48.169831] twistd[861]: 2026-10-04T07:42:18+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 48.197480] twistd[860]: 2026-10-04T07:42:18+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.216554] twistd[860]: 2026-10-04T07:42:18+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 48.236035] twistd[860]: 2026-10-04T07:42:18+0000 [-] step 'git' complete: success (None) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 48.243569] twistd[860]: 2026-10-04T07:42:18+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 48.259520] twistd[860]: 2026-10-04T07:42:18+0000 [-] : RemoteCommand.run [10] buildbot # [ 48.261335] twistd[860]: 2026-10-04T07:42:18+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 48.263805] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 48.267029] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 48.268948] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 48.271604] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 48.274251] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 48.277421] twistd[861]: 2026-10-04T07:42:18+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 48.279783] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 48.304201] twistd[861]: 2026-10-04T07:42:19+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.029322 buildbot # [ 48.306459] twistd[861]: 2026-10-04T07:42:19+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 48.329073] twistd[860]: 2026-10-04T07:42:19+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.335162] twistd[860]: 2026-10-04T07:42:19+0000 [-] : RemoteCommand.run [11] buildbot # [ 48.339364] twistd[860]: 2026-10-04T07:42:19+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 22987 0 0100 401 100 401 0 0 18112 0 0100 401 100 401 0 0 15042 0 [ 48.376080] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command 11): startCommand:shell buildbot # 0 buildbot # [ 48.379336] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 48.383345] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 48.389346] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 48.393846] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 48.397748] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 48.404270] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds) buildbot # [ 48.563069] systemd[1]: Started Nix Daemon. buildbot # [ 48.690457] nix-daemon[1136]: accepted connection from pid 1135, user buildbot-worker buildbot # [ 48.725125] twistd[861]: 2026-10-04T07:42:19+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.346128 buildbot # [ 48.729443] twistd[861]: 2026-10-04T07:42:19+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 48.732912] twistd[860]: 2026-10-04T07:42:19+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.759966] twistd[860]: 2026-10-04T07:42:19+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 48.773046] twistd[860]: 2026-10-04T07:42:19+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 48.796240] twistd[860]: 2026-10-04T07:42:19+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 48.805638] twistd[860]: 2026-10-04T07:42:19+0000 [-] step 'build flake' complete: success (None) buildbot # [ 48.817839] twistd[860]: 2026-10-04T07:42:19+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0x7ceec1048ae0>, hideStepIf=. at 0x7ceec1048b80>)): [] buildbot # [ 48.825964] twistd[860]: 2026-10-04T07:42:19+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 48.836865] twistd[860]: 2026-10-04T07:42:19+0000 [-] : RemoteCommand.run [12] buildbot # [ 48.839909] twistd[860]: 2026-10-04T07:42:19+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 48.842764] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 48.844215] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 48.846360] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 48.849075] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 48.853055] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 48.855056] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 48.857788] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 48.873131] twistd[861]: 2026-10-04T07:42:19+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.020964 buildbot # [ 48.875622] twistd[861]: 2026-10-04T07:42:19+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 48.904449] twistd[860]: 2026-10-04T07:42:19+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 48.985138] twistd[860]: 2026-10-04T07:42:19+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 48.993867] twistd[860]: 2026-10-04T07:42:19+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 49.005601] twistd[860]: 2026-10-04T07:42:19+0000 [-] : RemoteCommand.run [13] buildbot # [ 49.008796] twistd[860]: 2026-10-04T07:42:19+0000 [-] command '['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 49.012239] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 49.013636] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 49.017812] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0 --branch master --repo test-flake buildbot # [ 49.020750] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 49.023587] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 49.025761] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 49.029128] twistd[861]: 2026-10-04T07:42:19+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 49.406339] nix-daemon[1136]: accepted connection from pid 1145, user buildbot-worker buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 49.444093] twistd[861]: 2026-10-04T07:42:20+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.427323 buildbot # [ 49.447172] twistd[861]: 2026-10-04T07:42:20+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 49.451473] twistd[860]: 2026-10-04T07:42:20+0000 [Broker,0,127.0.0.1] rc=0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # [ 49.494550] twistd[860]: 2026-10-04T07:42:20+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0x7ceec1049300>, logEnviron=False)): [] buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 [ 49.511088] twistd[860]: 2026-10-04T07:42:20+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # 0100 401 100 401 0 0 11616 0 0100 401 100 401 0 0 9727 0 0100 401 100 401 0 0 8403 0 0 buildbot # [ 49.540993] twistd[860]: 2026-10-04T07:42:20+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot # [ 49.548701] twistd[860]: 2026-10-04T07:42:20+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 49.560760] twistd[860]: 2026-10-04T07:42:20+0000 [-] : RemoteCommand.run [14] buildbot # [ 49.563416] twistd[860]: 2026-10-04T07:42:20+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 49.566706] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 49.568365] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 49.570921] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0 --branch master --repo test-flake buildbot # [ 49.575673] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 49.578663] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 49.581018] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 49.584529] twistd[861]: 2026-10-04T07:42:20+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 49.942710] nix-daemon[1136]: accepted connection from pid 1157, user buildbot-worker buildbot # [ 49.973054] twistd[861]: 2026-10-04T07:42:20+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'f3be4f43e1ea62ac81ef05a40f7c9c8e34f8edd0', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.398265 buildbot # [ 49.976134] twistd[861]: 2026-10-04T07:42:20+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 49.981377] twistd[860]: 2026-10-04T07:42:20+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 50.019268] twistd[860]: 2026-10-04T07:42:20+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0x7ceec10494e0>, hideStepIf=. at 0x7ceec1049580>, logEnviron=False)): [] buildbot # [ 50.030520] twistd[860]: 2026-10-04T07:42:20+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 50.031926] twistd[860]: 2026-10-04T07:42:20+0000 [-] : build finished buildbot # [ 50.040510] twistd[860]: 2026-10-04T07:42:20+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 16184 0 0100 411 100 411 0 0 13711 0 0100 411 100 411 0 0 11907 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds) (finished: subtest: Wait for nix-eval build to complete, in 18.03 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) (finished: subtest: Schedule cache is created, in 0.06 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 63349 0 0100 3793 100 3793 0 0 58591 0 0100 3793 100 3793 0 0 54694 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds) buildbot # [ 51.062742] sshd-session[1194]: Accepted publickey for root from ::1 port 59020 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 51.083863] sshd-session[1194]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 51.098433] systemd-logind[436]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 51.101567] systemd[1]: Started Session 7 of User root. buildbot # [ 51.143811] sshd-session[1197]: Received disconnect from ::1 port 59020:11: disconnected by user buildbot # [ 51.145166] sshd-session[1197]: Disconnected from user root ::1 port 59020 buildbot # [ 51.146593] sshd-session[1194]: pam_unix(sshd:session): session closed for user root buildbot # [ 51.157559] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 51.160516] systemd-logind[436]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 51.161799] systemd-logind[436]: Removed session 7. buildbot # [ 51.366257] sshd-session[1202]: Accepted publickey for root from ::1 port 59030 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 51.386967] sshd-session[1202]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 51.401348] systemd-logind[436]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 51.404575] systemd[1]: Started Session 8 of User root. buildbot # [ 51.456373] sshd-session[1205]: Received disconnect from ::1 port 59030:11: disconnected by user buildbot # [ 51.457610] sshd-session[1205]: Disconnected from user root ::1 port 59030 buildbot # [ 51.459191] sshd-session[1202]: pam_unix(sshd:session): session closed for user root buildbot # [ 51.465685] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 51.468810] systemd-logind[436]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 51.470623] systemd-logind[436]: Removed session 8. buildbot # [ 51.475982] twistd[860]: 2026-10-04T07:42:22+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 49848 0 0100 3793 100 3793 0 0 46892 0 0100 3793 100 3793 0 0 44387 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 51538 0 0100 3793 100 3793 0 0 48150 0 0100 3793 100 3793 0 0 45506 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 51461 0 0100 3793 100 3793 0 0 48335 0 0100 3793 100 3793 0 0 45660 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot # [ 55.015379] twistd[860]: 2026-10-04T07:42:25+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 55.020681] twistd[860]: 2026-10-04T07:42:25+0000 [-] beginning configuration update buildbot # [ 55.023876] twistd[860]: 2026-10-04T07:42:25+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg' buildbot # [ 55.064184] twistd[860]: 2026-10-04T07:42:25+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 55.071133] twistd[860]: 2026-10-04T07:42:25+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 55.173570] twistd[860]: 2026-10-04T07:42:25+0000 [-] configuration update complete (took 0.153 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 53523 0 0100 4079 100 4079 0 0 50376 0 0100 4079 100 4079 0 0 47680 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 59116 0 0100 4079 100 4079 0 0 55257 0 0100 4079 100 4079 0 0 52028 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds) (finished: subtest: Nightly schedulers are created, in 4.93 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 108.9k 0 0100 2371 100 2371 0 0 90985 0 0100 2371 100 2371 0 0 77453 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.09 seconds) (finished: subtest: Scheduled effect builder exists, in 0.09 seconds) (finished: run the VM test script, in 56.73 seconds) test script finished in 56.79s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.24 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh