tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 12) buildbot # Formatting '/build/vm-state-buildbot/tmp.VD2E572YYa', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: d609be65-db14-42e9-86a8-5a252ccf5d06 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/r5pfa9bc1b98wzhixmnlnnqg7xai6v40-nixos-system-buildbot-test/init regInfo=/nix/store/39whcy8b4bpkydibn0cdlbxmaf6q90g5-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/39whcy8b4bpkydibn0cdlbxmaf6q90g5-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000028] arm-pv: using stolen time PV buildbot # [ 0.000395] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000529] Console: colour dummy device 80x25 buildbot # [ 0.000536] printk: legacy console [tty0] enabled buildbot # [ 0.000714] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000721] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000788] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000951] landlock: Up and running. buildbot # [ 0.000954] Yama: becoming mindful. buildbot # [ 0.001382] LSM support for eBPF active buildbot # [ 0.001508] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001528] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002566] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003371] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003375] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004524] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004607] EFI services will not be available. buildbot # [ 0.004680] smp: Bringing up secondary CPUs ... buildbot # [ 0.004688] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004691] SMP: Total of 1 processors activated. buildbot # [ 0.004694] CPU: All CPU(s) started at EL1 buildbot # [ 0.004703] CPU features: detected: Branch Target Identification buildbot # [ 0.004707] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004712] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004715] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004719] CPU features: detected: Common not Private translations buildbot # [ 0.004722] CPU features: detected: CRC32 instructions buildbot # [ 0.004725] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004729] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004732] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004734] CPU features: detected: E0PD buildbot # [ 0.004737] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004740] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004743] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004746] CPU features: detected: Fine Grained Traps buildbot # [ 0.004750] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004754] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004757] CPU features: detected: LSE atomic instructions buildbot # [ 0.004759] CPU features: detected: Privileged Access Never buildbot # [ 0.004762] CPU features: detected: PMUv3 buildbot # [ 0.004764] CPU features: detected: RAS Extension Support buildbot # [ 0.004767] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004770] CPU features: detected: Random Number Generator buildbot # [ 0.004772] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004775] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004778] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004782] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004819] alternatives: applying system-wide alternatives buildbot # [ 0.007597] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.007732] Memory: 895104K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008010] devtmpfs: initialized buildbot # [ 0.009733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.009755] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.009784] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.009932] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.009936] 0 pages in range for non-PLT usage buildbot # [ 0.009937] 508320 pages in range for PLT usage buildbot # [ 0.010051] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.010792] DMI not present or invalid. buildbot # [ 0.014064] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016444] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016572] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016732] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016753] audit: initializing netlink subsys (disabled) buildbot # [ 0.017287] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.017290] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.017293] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.017296] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.017299] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017323] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017333] cpuidle: using governor ladder buildbot # [ 0.017338] cpuidle: using governor menu buildbot # [ 0.017531] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017546] ASID allocator initialised with 65536 entries buildbot # [ 0.018708] Serial: AMBA PL011 UART driver buildbot # [ 0.023754] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.023879] printk: console [ttyAMA0] enabled buildbot # [ 0.150918] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.150935] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.150941] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.150946] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.150950] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.150954] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.150959] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.150963] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.158524] fbcon: Taking over console buildbot # [ 0.158538] ACPI: Interpreter disabled. buildbot # [ 0.160434] iommu: Default domain type: Translated buildbot # [ 0.160444] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.167498] SCSI subsystem initialized buildbot # [ 0.168204] usbcore: registered new interface driver usbfs buildbot # [ 0.168232] usbcore: registered new interface driver hub buildbot # [ 0.168250] usbcore: registered new device driver usb buildbot # [ 0.168523] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.168530] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.168540] PTP clock support registered buildbot # [ 0.168587] EDAC MC: Ver: 3.0.0 buildbot # [ 0.173376] scmi_core: SCMI protocol bus registered buildbot # [ 0.174334] FPGA manager framework buildbot # [ 0.175244] vgaarb: loaded buildbot # [ 0.175912] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.176354] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.176385] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.178848] netfs: FS-Cache loaded buildbot # [ 0.178964] pnp: PnP ACPI: disabled buildbot # [ 0.187597] NET: Registered PF_INET protocol family buildbot # [ 0.187759] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.215605] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.215639] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.215661] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.215704] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.215780] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.215874] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.221670] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.221722] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.221831] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.221861] NET: Registered PF_XDP protocol family buildbot # [ 0.221876] PCI: CLS 0 bytes, default 64 buildbot # [ 0.225664] Trying to unpack rootfs image as initramfs... buildbot # [ 0.232624] kvm [1]: HYP mode not available buildbot # [ 0.317118] Initialise system trusted keyrings buildbot # [ 0.317837] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.319106] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.319896] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.348874] Key type asymmetric registered buildbot # [ 0.348890] Asymmetric key parser 'x509' registered buildbot # [ 0.348947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.351138] io scheduler mq-deadline registered buildbot # [ 0.351149] io scheduler kyber registered buildbot # [ 0.360087] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.360655] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.361015] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.361030] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.361042] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.361050] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.361076] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.361099] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.361174] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.361184] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.361190] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.361196] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.361201] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.361266] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.361711] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.361948] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.361967] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.361997] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.362014] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.362476] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.362665] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.362682] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.362712] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.363168] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.363356] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.363372] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.363403] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.363857] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.364063] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.364080] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.364110] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.364576] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.364767] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.364783] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.364814] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.365268] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.365456] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.365472] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.365503] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.366002] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.366193] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.366209] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.366240] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.366256] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.366745] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.366937] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.366967] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.367429] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.367621] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.367651] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.424148] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.424350] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.424608] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.424913] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.424932] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.424963] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.425426] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.425615] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.425631] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.425661] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.426239] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.426251] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.426257] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.426305] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.426353] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.426402] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.426451] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.426501] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.426551] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.426601] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.426651] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.426700] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.426771] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.426819] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.426842] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.426864] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.426887] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.426910] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.426932] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.426957] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.426980] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.427003] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.427026] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.427049] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.427072] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.427095] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.427117] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.427139] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.427161] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.427184] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.427206] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.427228] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.427251] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.427274] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.427301] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.427311] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.427316] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.428516] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.489588] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.491753] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.502039] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.507958] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.509924] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.520815] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.522777] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.533295] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.535640] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.539002] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.546176] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.558766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.561215] msm_serial: driver initialized buildbot # [ 0.561366] SuperH (H)SCI(F) driver initialized buildbot # [ 0.561419] STM32 USART driver initialized buildbot # [ 0.592417] loop: module loaded buildbot # [ 0.592579] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.593309] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.604456] megasas: 07.734.00.00-rc1 buildbot # [ 0.605202] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.607195] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.607238] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.608749] Using buffer write method buildbot # [ 0.608803] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.610474] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.610497] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.627937] Using buffer write method buildbot # [ 0.627960] Concatenating MTD devices: buildbot # [ 0.627964] (0): "0.flash" buildbot # [ 0.627968] (1): "0.flash" buildbot # [ 0.627972] into device "0.flash" buildbot # [ 0.837091] Freeing initrd memory: 25516K buildbot # [ 0.842881] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.846369] thunder_xcv, ver 1.0 buildbot # [ 0.846407] thunder_bgx, ver 1.0 buildbot # [ 0.846428] nicpf, ver 1.0 buildbot # [ 0.846952] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.846958] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.846985] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.846992] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.847020] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.847026] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.847048] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.847054] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.847185] sky2: driver version 1.30 buildbot # [ 0.856609] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.856640] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.856869] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.859551] usbcore: registered new interface driver usb-storage buildbot # [ 0.859600] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.859613] usbserial: USB Serial support registered for generic buildbot # [ 0.862557] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.864052] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.864075] rtc-pl031 9010000.pl031: setting system clock to 2026-10-11T08:11:28 UTC (1791706288) buildbot # [ 0.864366] i2c_dev: i2c /dev entries driver buildbot # [ 0.869463] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.869473] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.869733] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.870101] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.871697] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.875353] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.876409] hub 1-0:1.0: USB hub found buildbot # [ 0.876430] hub 1-0:1.0: 6 ports detected buildbot # [ 0.877931] usbcore: registered new interface driver usbhid buildbot # [ 0.877939] usbhid: USB HID core driver buildbot # [ 0.891130] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.892612] drop_monitor: Initializing network drop monitor service buildbot # [ 0.892728] NET: Registered PF_INET6 protocol family buildbot # [ 0.895802] Segment Routing with IPv6 buildbot # [ 0.895825] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.895857] NET: Registered PF_PACKET protocol family buildbot # [ 0.897542] 9pnet: Installing 9P2000 support buildbot # [ 0.899547] Key type dns_resolver registered buildbot # [ 0.906206] registered taskstats version 1 buildbot # [ 0.906345] Loading compiled-in X.509 certificates buildbot # [ 0.914463] Demotion targets for Node 0: null buildbot # [ 0.914552] Key type .fscrypt registered buildbot # [ 0.914559] Key type fscrypt-provisioning registered buildbot # [ 0.914645] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.914664] ima: Allocated hash algorithm: sha1 buildbot # [ 0.914682] ima: No architecture policies found buildbot # [ 0.918692] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.935794] clk: Disabling unused clocks buildbot # [ 0.935814] PM: genpd: Disabling unused power domains buildbot # [ 0.940167] Freeing unused kernel memory: 4736K buildbot # [ 0.940347] Run /init as init process buildbot # [ 0.958113] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.123947] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.273468] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.292775] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.299222] systemd[1]: Detected virtualization qemu. buildbot # [ 1.300311] systemd[1]: Detected architecture arm64. buildbot # [ 1.301354] systemd[1]: Running in initrd. buildbot # [ 1.302755] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.304245] systemd[1]: Hostname set to . buildbot # [ 1.360134] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.392639] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.401790] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.402840] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.404105] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.405055] systemd[1]: Reached target Path Units. buildbot # [ 1.405789] systemd[1]: Reached target Slice Units. buildbot # [ 1.406531] systemd[1]: Reached target Swaps. buildbot # [ 1.407202] systemd[1]: Reached target Timer Units. buildbot # [ 1.408084] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.409198] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.410314] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.411195] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.412125] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.412928] systemd[1]: Reached target Socket Units. buildbot # [ 1.415034] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.423554] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.423641] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.429162] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.444283] systemd[1]: Starting Journal Service... buildbot # [ 1.459053] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.459867] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.462488] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.470175] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.471788] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.480097] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.482003] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.482338] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.492356] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.510582] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.531998] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.534248] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.544665] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.546953] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.552905] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.553142] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.553152] [drm] features: -context_init buildbot # [ 1.553853] [drm] number of scanouts: 1 buildbot # [ 1.553871] [drm] number of cap sets: 0 buildbot # [ 1.564216] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.564230] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.592534] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.596371] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.612425] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.615051] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.632062] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.632240] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.632273] systemd[1]: Reached target Local File Systems. buildbot # [ 1.637074] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.652515] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.656009] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.668095] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.713126] systemd[1]: Started Journal Service. buildbot # [ 1.708241] systemd-modules-load[74]: Inserted module 'dm_mod' buildbot # [ 1.712197] systemd-modules-load[74]: Module 'virtio_balloon' is built in buildbot # [ 1.713381] systemd-modules-load[74]: Module 'virtio_console' is built in buildbot # [ 1.714539] systemd-modules-load[74]: Inserted module 'virtio_gpu' buildbot # [ 1.715518] systemd-modules-load[74]: Module 'virtio_rng' is built in buildbot # [ 1.724370] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.728558] systemd-udevd[81]: Using default interface naming scheme 'v260'. buildbot # [ 1.749789] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.766959] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.840502] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.908412] systemd-vconsole-setup[103]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.911655] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.574789] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.575742] systemd[1]: Reached target System Initialization. buildbot # [ 2.576669] systemd[1]: Reached target Basic System. buildbot # [ 2.757547] (udev-worker)[97]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.767145] (udev-worker)[92]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.772232] (udev-worker)[92]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.802462] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.804261] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.811886] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.853302] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.858285] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.863174] systemd[1]: Mounting /sysroot... buildbot # [ 2.911298] EXT4-fs (vda): mounted filesystem d609be65-db14-42e9-86a8-5a252ccf5d06 r/w with ordered data mode. Quota mode: none. buildbot # [ 2.900938] systemd[1]: Mounted /sysroot. buildbot # [ 2.908096] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.910468] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.939917] systemd-sysroot-fstab-check[120]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 2.945820] systemd[1]: Reload requested from client PID 120 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 2.950956] systemd[1]: Reloading... buildbot # [ 3.164642] systemd[1]: Reloading finished in 216 ms. buildbot # [ 3.181236] systemd-sysroot-fstab-check[120]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.185952] systemd-sysroot-fstab-check[120]: Requesting swap.target/start/replace... buildbot # [ 3.190129] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.193816] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.196112] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.201209] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.222416] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.223920] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.452126] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.459869] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.470696] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.486209] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.510359] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.530625] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.550228] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.552002] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.557550] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.562398] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.571289] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.598211] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.599540] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.179285] (udev-worker)[101]: mtd0ro: Failed to find and pin callout binary "/nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/mtd_probe": No such file or directory buildbot # [ 4.185524] (udev-worker)[101]: mtd0ro: /nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory buildbot # [ 4.204099] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.206636] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.211515] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 4.212422] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.225979] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.227074] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.231630] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.249726] systemd-vconsole-setup[155]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 4.253255] systemd[1]: Finished Virtual Console Setup. buildbot # [ 4.451645] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 4.487763] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 4.490119] systemd[1]: Reached target Initrd File Systems. buildbot # [ 4.493685] systemd[1]: Starting Find NixOS closure... buildbot # [ 4.500794] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 4.541992] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 4.543677] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 4.554316] systemd[1]: Finished Find NixOS closure. buildbot # [ 4.556174] systemd[1]: Reached target Initrd Default Target. buildbot # [ 4.558326] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 4.586164] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 4.588181] systemd[1]: Stopped target Basic System. buildbot # [ 4.592498] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 4.593741] systemd[1]: Stopped target Path Units. buildbot # [ 4.595637] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 4.599312] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 4.604225] systemd[1]: Stopped target Slice Units. buildbot # [ 4.605164] systemd[1]: Stopped target Socket Units. buildbot # [ 4.606090] systemd[1]: Stopped target System Initialization. buildbot # [ 4.607061] systemd[1]: Stopped target Swaps. buildbot # [ 4.607831] systemd[1]: Stopped target Timer Units. buildbot # [ 4.612232] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 4.613436] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 4.617091] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 4.619987] systemd[1]: Stopped Find NixOS closure. buildbot # [ 4.625931] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 4.627659] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 4.629685] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 4.633151] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 4.637186] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 4.639319] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 4.649634] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 4.651732] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 4.656492] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 4.657691] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 4.660380] systemd[1]: Stopped target Local File Systems. buildbot # [ 4.661647] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 4.663967] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 4.668177] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 4.669029] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 4.670092] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.672238] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.673532] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 4.674654] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 4.675599] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 4.676761] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 4.677625] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 4.678640] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.679473] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 4.684233] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 4.685317] systemd[1]: systemd-udevd.service: Consumed 1.541s CPU time over 3.032s wall clock time, 22.9M memory peak. buildbot # [ 4.692164] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 4.693239] systemd[1]: Closed udev Control Socket. buildbot # [ 4.693989] systemd[1]: Starting Cleanup udev Database... buildbot # [ 4.694764] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 4.695820] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 4.700336] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 4.701476] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 4.702530] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 4.703492] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 4.729412] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 4.730594] systemd[1]: Finished Cleanup udev Database. buildbot # [ 4.731841] systemd[1]: Reached target Switch Root. buildbot # [ 4.736210] systemd[1]: Starting NixOS Activation... buildbot # [ 4.862641] initrd-nixos-activation-start[180]: booting system configuration /nix/store/r5pfa9bc1b98wzhixmnlnnqg7xai6v40-nixos-system-buildbot-test buildbot # [ 4.913914] initrd-nixos-activation-start[180]: running activation script... buildbot # [ 5.229297] initrd-nixos-activation-start[203]: setting up /etc... buildbot # [ 5.419189] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 5.422001] systemd[1]: Finished NixOS Activation. buildbot # [ 5.423142] systemd[1]: Starting Switch Root... buildbot # [ 5.445887] systemd[1]: Switching root. buildbot # [ 5.500456] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 6.034729] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 6.041591] systemd[1]: Detected virtualization qemu. buildbot # [ 6.043170] systemd[1]: Detected architecture arm64. buildbot # [ 6.044769] systemd[1]: Detected first boot. buildbot # [ 6.049386] systemd[1]: Initializing machine ID from random generator. buildbot # [ 6.322618] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 6.484010] NET: Registered PF_VSOCK protocol family buildbot # [ 6.490818] Guest personality initialized and is inactive buildbot # [ 6.491761] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 6.491788] Initialized host personality buildbot # [ 6.546202] systemd[1]: Applying preset policy. buildbot # [ 6.939262] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 7.321556] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 7.323249] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 7.326052] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 7.329216] systemd[1]: Created slice Slice /system/getty. buildbot # [ 7.331595] systemd[1]: Created slice User and Session Slice. buildbot # [ 7.333354] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 7.335465] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 7.337477] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 7.338989] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 7.340594] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 7.341775] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 7.343334] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 7.345041] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 7.346692] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 7.348441] systemd[1]: Reached target Path Units. buildbot # [ 7.349906] systemd[1]: Reached target Remote File Systems. buildbot # [ 7.351458] systemd[1]: Reached target Slice Units. buildbot # [ 7.353016] systemd[1]: Reached target Swaps. buildbot # [ 7.356260] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 7.360338] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.363465] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.366930] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.371468] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.373484] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.377071] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.379027] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.380942] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.382751] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.390917] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.391361] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.391714] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.397202] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.401359] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.406440] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.412771] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.427174] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.441007] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.444089] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.459737] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.461624] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.463818] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.505027] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.507091] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.541063] systemd[1]: Starting Journal Service... buildbot # [ 7.547387] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.563128] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.585488] fuse: init (API version 7.45) buildbot # [ 7.588284] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.588645] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.627735] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.653760] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.658373] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.667876] systemd-journald[274]: Collecting audit messages is enabled. buildbot # [ 7.671843] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.683179] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.683645] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.688039] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.688728] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.689244] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.689688] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.690310] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.690809] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.685945] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.692415] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.693872] systemd-modules-load[275]: Module 'atkbd' is built in buildbot # [ 7.694910] systemd-modules-load[275]: Module 'loop' is built in buildbot # [ 7.717900] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.708239] systemd-modules-load[275]: Inserted module 'tls' buildbot # [ 7.728160] EXT4-fs (vda): re-mounted d609be65-db14-42e9-86a8-5a252ccf5d06. buildbot # [ 7.734369] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.741567] systemd[1]: Started Journal Service. buildbot # [ 7.732660] systemd-oomd[276]: No swap; memory pressure usage will be degraded buildbot # [ 7.748110] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.753540] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.754353] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.796929] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.807538] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.811607] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.818003] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.834930] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.844093] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.853987] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.872795] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 7.885421] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 7.938022] systemd-journald[274]: Received client request to flush runtime journal. buildbot # [ 7.988288] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 7.990427] systemd[1]: Reached target First Boot Complete. buildbot # [ 7.994446] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 8.005031] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 8.032138] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 8.033118] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 8.037034] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 8.127153] systemd-udevd[307]: Using default interface naming scheme 'v260'. buildbot # [ 8.238139] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.310153] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.346914] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.347770] systemd[1]: Reached target Local File Systems. buildbot # [ 8.351201] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.358288] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.360622] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.364148] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.377667] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.396093] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.482413] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.490542] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.576548] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.586859] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.595615] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.699981] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.761998] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.771141] systemd[1]: Starting Update is Completed... buildbot # [ 8.837409] systemd[1]: Finished Update is Completed. buildbot # [ 9.140525] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.148214] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.484826] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.504583] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.505816] systemd[1]: Reached target System Initialization. buildbot # [ 9.507750] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.509102] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.510124] systemd[1]: Reached target Timer Units. buildbot # [ 9.516362] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.517327] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.518119] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.519357] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.529332] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.531085] systemd[1]: Reached target Socket Units. buildbot # [ 9.532312] systemd[1]: Reached target Basic System. buildbot # [ 9.540367] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.541412] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.542351] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.553572] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.570109] systemd[1]: Starting resolvconf update... buildbot # [ 9.571308] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.611093] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.670495] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.696128] nsncd[394]: Oct 11 08:11:37.347 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.704283] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.709313] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.713634] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.720172] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 9.729865] systemd[1]: Starting User Login Management... buildbot # [ 9.766100] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.794502] dbus-broker-launch[399]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.807402] dbus-broker-launch[399]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.814044] dbus-broker-launch[399]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.845681] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.894072] dbus-broker-launch[399]: Ready buildbot # [ 9.908550] systemd-logind[415]: New seat seat0. buildbot # [ 9.913738] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 9.917722] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 9.923748] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 9.925210] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 9.929723] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 9.933453] systemd[1]: Started User Login Management. buildbot # [ 9.937282] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 9.941472] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 9.950751] systemd[1]: Starting linger-users.service... buildbot # [ 9.956584] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.028575] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.034478] systemd[1]: Finished linger-users.service. buildbot # [ 10.038883] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.043067] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.046827] nsncd[460]: Oct 11 08:11:37.692 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.053996] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.060087] systemd[1]: Finished resolvconf update. buildbot # [ 10.060866] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.066999] systemd[1]: Starting DHCP Client... buildbot # [ 10.071527] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.161735] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 10.233545] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 10.243337] systemd[1]: Started backdoor.service. buildbot # [ 10.315979] dhcpcd[489]: dhcpcd-10.3.2 starting buildbot # [ 10.333579] dhcpcd[527]: dev: loaded udev buildbot # connecting to host... buildbot # [ 10.390003] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 10.385742] systemd[1]: Finished Extra networking commands.. buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot # [ 10.391288] systemd[1]: Reached target Network. buildbot: (connecting took 10.68 seconds) buildbot: (finished: waiting for the VM to finish booting, in 11.13 seconds) buildbot # [ 10.402068] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.435522] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.448094] systemd[1]: Starting SSH Daemon... buildbot # [ 10.461136] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.568256] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 10.621331] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 10.621806] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 10.625609] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 10.625957] cfg80211: failed to load regulatory.db buildbot # [ 10.629305] dhcpcd[527]: no valid interfaces found buildbot # [ 10.635529] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.640555] dhcpcd[527]: libudev: received NULL device buildbot # [ 10.645944] dhcpcd[527]: no valid interfaces found buildbot # [ 10.655364] dhcpcd[527]: libudev: received NULL device buildbot # [ 10.665014] systemd[1]: Started Getty on tty1. buildbot # [ 10.665695] systemd[1]: Reached target Login Prompts. buildbot # [ 10.680270] sshd[546]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.681129] sshd[546]: Server listening on :: port 22. buildbot # [ 10.681896] systemd[1]: Started SSH Daemon. buildbot # [ 10.690128] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.858098] setup-git-repo-start[567]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.865933] setup-git-repo-start[567]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.867295] setup-git-repo-start[567]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.875567] setup-git-repo-start[567]: hint: call: buildbot # [ 10.880450] setup-git-repo-start[567]: hint: buildbot # [ 10.884221] setup-git-repo-start[567]: hint: git config --global init.defaultBranch buildbot # [ 10.885344] setup-git-repo-start[567]: hint: buildbot # [ 10.885979] setup-git-repo-start[567]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.887280] setup-git-repo-start[567]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 10.904100] setup-git-repo-start[567]: hint: buildbot # [ 10.910779] setup-git-repo-start[567]: hint: git branch -m buildbot # [ 10.911869] setup-git-repo-start[567]: hint: buildbot # [ 10.914480] setup-git-repo-start[567]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 10.921210] setup-git-repo-start[567]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 10.929545] nginx-pre-start[561]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 10.936825] nginx-pre-start[561]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 10.948446] systemd[1]: Started Nginx Web Server. buildbot # [ 10.962089] setup-git-repo-start[573]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 10.963523] setup-git-repo-start[573]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 10.972385] setup-git-repo-start[573]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 10.980163] setup-git-repo-start[573]: hint: call: buildbot # [ 10.983969] setup-git-repo-start[573]: hint: buildbot # [ 10.985664] setup-git-repo-start[573]: hint: git config --global init.defaultBranch buildbot # [ 10.992657] setup-git-repo-start[573]: hint: buildbot # [ 10.995893] setup-git-repo-start[573]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 10.999106] setup-git-repo-start[573]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.007755] setup-git-repo-start[573]: hint: buildbot # [ 11.013893] setup-git-repo-start[573]: hint: git branch -m buildbot # [ 11.014755] setup-git-repo-start[573]: hint: buildbot # [ 11.015334] setup-git-repo-start[573]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.023878] setup-git-repo-start[573]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 11.032253] (udev-worker)[309]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 11.034672] postgresql-pre-start[566]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 11.052134] postgresql-pre-start[566]: This user must also own the server process. buildbot # [ 11.058683] postgresql-pre-start[566]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 11.059961] postgresql-pre-start[566]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 11.071515] postgresql-pre-start[566]: The default text search configuration will be set to "english". buildbot # [ 11.076832] postgresql-pre-start[566]: Data page checksums are disabled. buildbot # [ 11.083420] postgresql-pre-start[566]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 11.085740] postgresql-pre-start[566]: creating subdirectories ... ok buildbot # [ 11.086614] postgresql-pre-start[566]: selecting dynamic shared memory implementation ... posix buildbot # [ 11.087769] (udev-worker)[309]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.106112] setup-git-repo-start[584]: [master (root-commit) a08b71f] Initial commit with scheduled effects buildbot # [ 11.107399] setup-git-repo-start[584]: 3 files changed, 131 insertions(+) buildbot # [ 11.116934] setup-git-repo-start[584]: create mode 100644 effects-lib.nix buildbot # [ 11.125455] setup-git-repo-start[584]: create mode 100644 flake.lock buildbot # [ 11.126400] setup-git-repo-start[584]: create mode 100644 flake.nix buildbot # [ 11.136591] (udev-worker)[312]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 11.215237] systemd-logind[415]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 11.237363] postgresql-pre-start[566]: selecting default "max_connections" ... 100 buildbot # [ 11.252707] setup-git-repo-start[589]: To /srv/repos/test-flake.git buildbot # [ 11.253594] setup-git-repo-start[589]: * [new branch] master -> master buildbot # [ 11.259616] setup-git-repo-start[589]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.265645] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 11.278077] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 11.286813] systemd[1]: Starting Address configuration of eth1... buildbot # [ 11.377269] postgresql-pre-start[566]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.413722] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 11.416836] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 11.403475] dhcpcd[527]: eth0: waiting for carrier buildbot # [ 11.406877] dhcpcd[527]: eth0: carrier acquired buildbot # [ 11.422435] network-addresses-eth1-start[606]: adding address 192.168.1.1/24... done buildbot # [ 11.427101] dhcpcd[527]: DUID 00:01:00:01:32:5e:01:3b:52:54:00:12:34:56 buildbot # [ 11.428159] dhcpcd[527]: eth0: IAID 00:12:34:56 buildbot # [ 11.430076] dhcpcd[527]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 11.439208] network-addresses-eth1-start[606]: adding address 2001:db8:1::1/64... done buildbot # [ 11.458959] systemd[1]: Finished Address configuration of eth1. buildbot: (finished: waiting for unit sshd.service, in 12.41 seconds) buildbot: waiting for unit setup-git-repo.service buildbot # [ 11.724910] mousedev: PS/2 mouse device common for all mice buildbot # [ 11.775483] dhcpcd[527]: eth0: soliciting a DHCP lease buildbot # [ 11.781438] dhcpcd[527]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot: (finished: waiting for unit setup-git-repo.service, in 0.11 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 11.789061] dhcpcd[527]: eth0: probing address 10.0.2.15/24 buildbot # [ 11.828772] systemd-logind[415]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 13.397980] dhcpcd[527]: eth0: soliciting an IPv6 router buildbot # [ 13.400472] dhcpcd[527]: eth0: Router Advertisement from fe80::2 buildbot # [ 13.401313] dhcpcd[527]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 13.402223] dhcpcd[527]: eth0: adding route to fec0::/64 buildbot # [ 13.402985] dhcpcd[527]: eth0: adding default route via fe80::2 buildbot # [ 13.443866] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 13.512989] postgresql-pre-start[566]: selecting default time zone ... UTC buildbot # [ 13.517291] postgresql-pre-start[566]: creating configuration files ... ok buildbot # [ 14.002135] postgresql-pre-start[566]: running bootstrap script ... ok buildbot # [ 14.029062] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 14.050678] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.103425] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 14.106695] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 14.119855] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.208302] systemd-logind[415]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 14.557822] systemd-vconsole-setup[672]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 14.563500] systemd[1]: Finished Virtual Console Setup. buildbot # [ 14.834338] postgresql-pre-start[566]: performing post-bootstrap initialization ... ok buildbot # [ 14.965802] postgresql-pre-start[566]: syncing data to disk ... ok buildbot # [ 14.967769] postgresql-pre-start[566]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 14.969419] postgresql-pre-start[566]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 14.971622] postgresql-pre-start[566]: Success. You can now start the database server using: buildbot # [ 14.972944] postgresql-pre-start[566]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 15.069277] postgres[694]: [694] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 15.080382] postgres[694]: [694] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 15.081446] postgres[694]: [694] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 15.083231] postgres[694]: [694] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 15.092286] postgres[700]: [700] LOG: database system was shut down at 2026-10-11 08:11:42 GMT buildbot # [ 15.100079] postgres[694]: [694] LOG: database system is ready to accept connections buildbot # [ 15.104508] systemd[1]: Started PostgreSQL Server. buildbot # [ 15.108809] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 15.269641] postgresql-setup-start[711]: CREATE DATABASE buildbot # [ 15.335959] postgresql-setup-start[720]: CREATE ROLE buildbot # [ 15.358649] postgresql-setup-start[722]: ALTER DATABASE buildbot # [ 15.367273] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 15.370432] systemd[1]: Reached target PostgreSQL. buildbot # [ 15.373073] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 15.421994] buildbot-master-pre-start[732]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 16.786380] dhcpcd[527]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 16.788322] dhcpcd[527]: eth0: adding route to 10.0.2.0/24 buildbot # [ 16.789146] dhcpcd[527]: eth0: adding default route via 10.0.2.2 buildbot # [ 16.930755] systemd[1]: Started DHCP Client. buildbot # [ 19.655910] buildbot-master-pre-start[734]: updating existing installation buildbot # [ 19.660166] buildbot-master-pre-start[734]: not touching existing buildbot.tac buildbot # [ 19.661213] buildbot-master-pre-start[734]: creating buildbot.tac.new instead buildbot # [ 19.662174] buildbot-master-pre-start[734]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 19.663294] buildbot-master-pre-start[734]: creating database (postgresql://@/buildbot) buildbot # [ 19.668111] buildbot-master-pre-start[734]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 20.061543] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 20.069276] systemd[1]: Started Buildbot Worker.. buildbot # [ 20.071371] systemd[1]: Reached target Multi-User System. buildbot # [ 20.076287] systemd[1]: Startup finished in 929ms (kernel) + 4.642s (initrd) + 14.500s (userspace) = 20.072s. buildbot: (finished: waiting for unit multi-user.target, in 9.08 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 21.539148] twistd[823]: Starting worker local-worker-000 buildbot # [ 21.539314] twistd[823]: 2026-10-11T08:11:48+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 21.542457] twistd[823]: 2026-10-11T08:11:49+0000 [-] Loaded. buildbot # [ 21.543403] twistd[823]: 2026-10-11T08:11:49+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 21.543660] twistd[823]: 2026-10-11T08:11:49+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 21.544206] twistd[823]: 2026-10-11T08:11:49+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 21.555455] twistd[823]: 2026-10-11T08:11:49+0000 [-] recording hostname in twistd.hostname buildbot # [ 21.558349] twistd[823]: 2026-10-11T08:11:49+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 21.562796] twistd[823]: 2026-10-11T08:11:49+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 1.8096610706239415 seconds. buildbot # [ 21.565772] twistd[823]: 2026-10-11T08:11:49+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 22.982885] twistd[822]: 2026-10-11T08:11:48+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 22.984956] twistd[822]: 2026-10-11T08:11:50+0000 [-] Loaded. buildbot # [ 22.985040] twistd[822]: 2026-10-11T08:11:50+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 22.985073] twistd[822]: 2026-10-11T08:11:50+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 22.985103] twistd[822]: 2026-10-11T08:11:50+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 22.991417] twistd[822]: 2026-10-11T08:11:50+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 23.371020] twistd[823]: 2026-10-11T08:11:51+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 23.375344] twistd[823]: 2026-10-11T08:11:51+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.649034420958501 seconds. buildbot # [ 23.378602] twistd[823]: 2026-10-11T08:11:51+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.648606] twistd[822]: 2026-10-11T08:11:51+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 23.739641] twistd[822]: 2026-10-11T08:11:51+0000 [-] adding 9 new builders, removing 0 buildbot # [ 23.916139] twistd[822]: 2026-10-11T08:11:51+0000 [-] adding 3 new services, removing 0 buildbot # [ 24.087655] twistd[822]: 2026-10-11T08:11:51+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 24.095435] twistd[822]: 2026-10-11T08:11:51+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 24.104116] twistd[822]: 2026-10-11T08:11:51+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 24.305475] twistd[822]: 2026-10-11T08:11:51+0000 [-] BuildbotSite starting on 8010 buildbot # [ 24.306587] twistd[822]: 2026-10-11T08:11:51+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 24.310029] twistd[822]: 2026-10-11T08:11:51+0000 [-] adding 5 new workers, removing 0 buildbot # [ 24.322417] twistd[822]: 2026-10-11T08:11:51+0000 [-] PBServerFactory starting on 9989 buildbot # [ 24.325003] twistd[822]: 2026-10-11T08:11:51+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 24.368888] sshd-session[879]: Accepted publickey for root from ::1 port 56996 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 24.388819] sshd-session[879]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.398431] twistd[822]: 2026-10-11T08:11:52+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.399611] twistd[822]: 2026-10-11T08:11:52+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.400984] twistd[822]: 2026-10-11T08:11:52+0000 [-] message from master: attached buildbot # [ 24.404872] twistd[822]: 2026-10-11T08:11:52+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 24.411748] twistd[822]: 2026-10-11T08:11:52+0000 [-] bot attached buildbot # [ 24.414257] twistd[822]: 2026-10-11T08:11:52+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 24.417146] twistd[822]: 2026-10-11T08:11:52+0000 [-] message from master: attached buildbot # [ 24.439215] twistd[822]: 2026-10-11T08:11:52+0000 [-] BuildMaster is running buildbot # [ 24.444553] systemd[1]: Created slice Slice /user/0. buildbot # [ 24.453714] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 24.472510] systemd-logind[415]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 24.507258] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 24.523288] systemd[1]: Starting User Manager for UID 0... buildbot # [ 24.560272] (systemd)[888]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.566980] systemd-logind[415]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 24.847225] systemd[888]: Queued start job for default target Main User Target. buildbot # [ 24.853612] systemd[888]: Created slice User Application Slice. buildbot # [ 24.855725] systemd[888]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 24.857010] systemd[888]: Reached target Paths. buildbot # [ 24.857937] systemd[888]: Reached target Timers. buildbot # [ 24.859862] systemd[888]: Starting D-Bus User Message Bus Socket... buildbot # [ 24.862092] systemd[888]: Starting Create User Files and Directories... buildbot # [ 24.918240] systemd[888]: Finished Create User Files and Directories. buildbot # [ 24.954966] systemd[888]: Listening on D-Bus User Message Bus Socket. buildbot # [ 24.957672] systemd[888]: Reached target Sockets. buildbot # [ 24.958418] systemd[888]: Reached target Basic System. buildbot # [ 24.959135] systemd[888]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 24.962135] systemd[888]: Reached target Main User Target. buildbot # [ 24.962967] systemd[888]: Startup finished in 372ms. buildbot # [ 24.963673] systemd[1]: Started User Manager for UID 0. buildbot # [ 24.966523] systemd[1]: Started Session 1 of User root. buildbot # [ 24.992641] sshd-session[901]: Received disconnect from ::1 port 56996:11: disconnected by user buildbot # [ 24.995431] sshd-session[901]: Disconnected from user root ::1 port 56996 buildbot # [ 24.998085] sshd-session[879]: pam_unix(sshd:session): session closed for user root buildbot # [ 25.003029] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 25.003907] systemd-logind[415]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 25.012312] systemd-logind[415]: Removed session 1. buildbot # [ 25.176723] sshd-session[906]: Accepted publickey for root from ::1 port 57008 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 25.190185] sshd-session[906]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 25.201039] systemd-logind[415]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 25.213075] systemd[1]: Started Session 3 of User root. buildbot # [ 25.257339] sshd-session[909]: Received disconnect from ::1 port 57008:11: disconnected by user buildbot # [ 25.267008] sshd-session[909]: Disconnected from user root ::1 port 57008 buildbot # [ 25.272531] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 25.273539] sshd-session[906]: pam_unix(sshd:session): session closed for user root buildbot # [ 25.274679] systemd-logind[415]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 25.275791] systemd-logind[415]: Removed session 3. buildbot # [ 25.312484] twistd[822]: 2026-10-11T08:11:52+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.30 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.07 seconds) (finished: subtest: Master and worker services start, in 4.55 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 20180 0 0100 266 100 266 0 0 16668 0 0100 266 100 266 0 0 14467 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.06 seconds) (finished: subtest: Project is registered, in 0.06 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.32 seconds) (finished: subtest: CLI list-schedules works, in 0.32 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # a08b71f..f5e87c3 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.09 seconds) (finished: subtest: Push a new commit to trigger build, in 0.09 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3327 0 0100 51 100 51 0 0 2821 0 0100 51 100 51 0 0 2478 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.05 seconds) buildbot # [ 26.028124] twistd[823]: 2026-10-11T08:11:53+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.037827] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=39444) buildbot # [ 26.043196] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.050130] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 26.064177] twistd[822]: 2026-10-11T08:11:53+0000 [-] bot attached buildbot # [ 26.067637] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 26.074777] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 26.081973] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 26.092185] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 26.113473] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 26.115308] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 26.156117] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 26.157785] twistd[822]: 2026-10-11T08:11:53+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 26.159310] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.184231] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.185427] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.186631] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.187755] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.216413] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.217607] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.218767] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] message from master: attached buildbot # [ 26.219908] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 26.233866] twistd[823]: 2026-10-11T08:11:53+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4953 0 0100 51 100 51 0 0 3579 0 0100 51 100 51 0 0 2813 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2919 0 0100 51 100 51 0 0 2383 0 0100 51 100 51 0 0 2020 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2289 0 0100 51 100 51 0 0 1934 0 0100 51 100 51 0 0 1723 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2017 0 0100 51 100 51 0 0 1770 0 0100 51 100 51 0 0 1581 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3356 0 0100 51 100 51 0 0 2725 0 0100 51 100 51 0 0 2314 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5033 0 0100 51 100 51 0 0 3634 0 0100 51 100 51 0 0 2857 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4935 0 0100 51 100 51 0 0 3513 0 0100 51 100 51 0 0 2780 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 34.307025] sshd-session[997]: Accepted publickey for root from ::1 port 54132 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.319914] sshd-session[997]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.332152] systemd-logind[415]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.345269] systemd[1]: Started Session 4 of User root. buildbot # [ 34.378763] sshd-session[1000]: Received disconnect from ::1 port 54132:11: disconnected by user buildbot # [ 34.381871] sshd-session[1000]: Disconnected from user root ::1 port 54132 buildbot # [ 34.394930] sshd-session[997]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.397363] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 34.398546] systemd-logind[415]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 34.399969] systemd-logind[415]: Removed session 4. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3437 0 0100 51 100 51 0 0 2926 0 0100 51 100 51 0 0 2552 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 34.576923] sshd-session[1005]: Accepted publickey for root from ::1 port 54146 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.586581] sshd-session[1005]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.595340] systemd-logind[415]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.600798] systemd[1]: Started Session 5 of User root. buildbot # [ 34.636075] sshd-session[1011]: Received disconnect from ::1 port 54146:11: disconnected by user buildbot # [ 34.638735] sshd-session[1011]: Disconnected from user root ::1 port 54146 buildbot # [ 34.642311] sshd-session[1005]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.644423] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 34.648704] systemd-logind[415]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 34.651165] systemd-logind[415]: Removed session 5. buildbot # [ 34.667575] twistd[822]: 2026-10-11T08:12:02+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 34.697810] twistd[822]: 2026-10-11T08:12:02+0000 [-] gitpoller: processing 1 changes: ['f5e87c3bf857193e8651a7277dd635dd9bd45dd0'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 34.808436] twistd[822]: 2026-10-11T08:12:02+0000 [-] added change with revision f5e87c3bf857193e8651a7277dd635dd9bd45dd0 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4514 0 0100 51 100 51 0 0 3353 0 0100 51 100 51 0 0 2676 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4064 0 0100 51 100 51 0 0 2905 0 0100 51 100 51 0 0 2378 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5233 0 0100 51 100 51 0 0 3648 0 0100 51 100 51 0 0 2877 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5311 0 0100 51 100 51 0 0 3774 0 0100 51 100 51 0 0 2943 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 39.869459] twistd[822]: 2026-10-11T08:12:07+0000 [-] added buildset 1 to database buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3205 0 0100 51 100 51 0 0 2681 0 0100 51 100 51 0 0 2276 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 40.015133] twistd[822]: 2026-10-11T08:12:07+0000 [-] starting build using worker buildbot # [ 40.024222] twistd[822]: 2026-10-11T08:12:07+0000 [-] .startBuild buildbot # [ 40.089390] twistd[822]: 2026-10-11T08:12:07+0000 [-] acquireLocks(worker , locks []) buildbot # [ 40.094233] twistd[822]: 2026-10-11T08:12:07+0000 [-] starting build .. pinging the worker buildbot # [ 40.100489] twistd[822]: 2026-10-11T08:12:07+0000 [-] sending ping buildbot # [ 40.102705] twistd[822]: 2026-10-11T08:12:07+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 40.106080] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] message from master: ping buildbot # [ 40.126659] twistd[822]: 2026-10-11T08:12:07+0000 [-] : RemoteCommand.run [0] buildbot # [ 40.132382] twistd[822]: 2026-10-11T08:12:07+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 40.134338] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 40.135516] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 40.140854] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 40.142301] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.150707] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 40.152540] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 40.154195] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 40.164077] twistd[823]: 2026-10-11T08:12:07+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.024743 buildbot # [ 40.165975] twistd[823]: 2026-10-11T08:12:07+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 40.193898] twistd[822]: 2026-10-11T08:12:07+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.232077] twistd[822]: 2026-10-11T08:12:07+0000 [-] : RemoteCommand.run [1] buildbot # [ 40.242241] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 40.243459] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 40.248932] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 40.251146] twistd[822]: 2026-10-11T08:12:07+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 40.260152] twistd[822]: 2026-10-11T08:12:07+0000 [-] : RemoteCommand.run [2] buildbot # [ 40.285207] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 40.286631] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 40.292143] twistd[822]: 2026-10-11T08:12:07+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.296643] twistd[822]: 2026-10-11T08:12:07+0000 [-] : RemoteCommand.run [3] buildbot # [ 40.332912] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 40.339052] twistd[823]: 2026-10-11T08:12:07+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 40.346569] twistd[822]: 2026-10-11T08:12:07+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.353475] twistd[822]: 2026-10-11T08:12:08+0000 [-] : RemoteCommand.run [4] buildbot # [ 40.386436] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 40.392171] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 40.396243] twistd[822]: 2026-10-11T08:12:08+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.402433] twistd[822]: 2026-10-11T08:12:08+0000 [-] No git repo present, making full clone buildbot # [ 40.405340] twistd[822]: 2026-10-11T08:12:08+0000 [-] : RemoteCommand.run [5] buildbot # [ 40.411363] twistd[822]: 2026-10-11T08:12:08+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 40.436079] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 40.441772] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 40.461087] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 40.487956] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.494633] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 40.506322] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 40.527093] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 40.702472] sshd-session[1046]: Accepted publickey for root from ::1 port 54160 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 40.715134] sshd-session[1046]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 40.728457] systemd-logind[415]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 40.732806] systemd[1]: Started Session 6 of User root. buildbot # [ 40.786588] sshd-session[1050]: Received disconnect from ::1 port 54160:11: disconnected by user buildbot # [ 40.790582] sshd-session[1050]: Disconnected from user root ::1 port 54160 buildbot # [ 40.792125] sshd-session[1046]: pam_unix(sshd:session): session closed for user root buildbot # [ 40.795851] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 40.800480] systemd-logind[415]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 40.802253] systemd-logind[415]: Removed session 6. buildbot # [ 40.815476] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.375779 buildbot # [ 40.828257] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 40.832492] twistd[822]: 2026-10-11T08:12:08+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.858435] twistd[822]: 2026-10-11T08:12:08+0000 [-] : RemoteCommand.run [6] buildbot # [ 40.863086] twistd[822]: 2026-10-11T08:12:08+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']' in dir 'build' buildbot # [ 40.872152] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 40.873349] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): RunProcess._startCommand buildbot # [ 40.880039] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f f5e87c3bf857193e8651a7277dd635dd9bd45dd0 buildbot # [ 40.885619] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.891969] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): watching logfiles {} buildbot # [ 40.895716] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'f5e87c3bf857193e8651a7277dd635dd9bd45dd0'] buildbot # [ 40.902152] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): using PTY: False buildbot # [ 40.914405] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0']): command finished with signal None, exit code 0, elapsedTime: 0.045406 buildbot # [ 40.918427] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 40.923554] twistd[822]: 2026-10-11T08:12:08+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.954925] twistd[822]: 2026-10-11T08:12:08+0000 [-] : RemoteCommand.run [7] buildbot # [ 40.959094] twistd[822]: 2026-10-11T08:12:08+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 40.965028] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 40.971779] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 40.978484] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 40.984112] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.990337] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 40.994432] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 41.000861] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 19221 0 0100 401 100 401 0 0 15893 0 0100 401 100 401 0 0 12560 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds) buildbot # [ 41.114307] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.145687 buildbot # [ 41.124177] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 41.127149] twistd[822]: 2026-10-11T08:12:08+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.141526] twistd[822]: 2026-10-11T08:12:08+0000 [-] : RemoteCommand.run [8] buildbot # [ 41.143077] twistd[822]: 2026-10-11T08:12:08+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 41.160871] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 41.164270] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 41.165861] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 41.167298] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.174734] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 41.176629] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 41.180259] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 41.186413] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.022545 buildbot # [ 41.188399] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 41.217657] twistd[822]: 2026-10-11T08:12:08+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.240113] twistd[822]: 2026-10-11T08:12:08+0000 [-] Got Git revision f5e87c3bf857193e8651a7277dd635dd9bd45dd0 buildbot # [ 41.241802] twistd[822]: 2026-10-11T08:12:08+0000 [-] : RemoteCommand.run [9] buildbot # [ 41.266792] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 41.271578] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 41.276921] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 41.280866] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 41.284525] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 41.287243] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 41.291418] twistd[823]: 2026-10-11T08:12:08+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 41.301442] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.034940 buildbot # [ 41.304641] twistd[823]: 2026-10-11T08:12:08+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 41.321559] twistd[822]: 2026-10-11T08:12:08+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.344891] twistd[822]: 2026-10-11T08:12:08+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 41.368029] twistd[822]: 2026-10-11T08:12:09+0000 [-] step 'git' complete: success (None) buildbot # [ 41.378332] twistd[822]: 2026-10-11T08:12:09+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 41.396978] twistd[822]: 2026-10-11T08:12:09+0000 [-] : RemoteCommand.run [10] buildbot # [ 41.399052] twistd[822]: 2026-10-11T08:12:09+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 41.405896] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 41.407109] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 41.410976] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 41.414241] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.417367] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 41.419502] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 41.422713] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 41.435173] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.032823 buildbot # [ 41.437827] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 41.449953] twistd[822]: 2026-10-11T08:12:09+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.454441] twistd[822]: 2026-10-11T08:12:09+0000 [-] : RemoteCommand.run [11] buildbot # [ 41.459893] twistd[822]: 2026-10-11T08:12:09+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 41.497202] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 41.503595] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 41.511172] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 41.519541] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.525748] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 41.530988] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 41.539974] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 41.647784] systemd[1]: Started Nix Daemon. buildbot # [ 41.727948] nix-daemon[1095]: accepted connection from pid 1094, user buildbot-worker buildbot # [ 41.753155] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.253333 buildbot # [ 41.763972] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 41.768804] twistd[822]: 2026-10-11T08:12:09+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.792368] twistd[822]: 2026-10-11T08:12:09+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 41.810145] twistd[822]: 2026-10-11T08:12:09+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 41.833629] twistd[822]: 2026-10-11T08:12:09+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 41.846275] twistd[822]: 2026-10-11T08:12:09+0000 [-] step 'build flake' complete: success (None) buildbot # [ 41.856930] twistd[822]: 2026-10-11T08:12:09+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xefa5dbf70c20>, hideStepIf=. at 0xefa5dbf70cc0>)): [] buildbot # [ 41.867001] twistd[822]: 2026-10-11T08:12:09+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 41.882815] twistd[822]: 2026-10-11T08:12:09+0000 [-] : RemoteCommand.run [12] buildbot # [ 41.890202] twistd[822]: 2026-10-11T08:12:09+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 41.893127] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 41.894442] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 41.897092] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 41.902336] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.905545] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 41.908092] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 41.911332] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 41.917677] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.035796 buildbot # [ 41.920329] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 41.934124] twistd[822]: 2026-10-11T08:12:09+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.955436] twistd[822]: 2026-10-11T08:12:09+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 41.965183] twistd[822]: 2026-10-11T08:12:09+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 41.977195] twistd[822]: 2026-10-11T08:12:09+0000 [-] : RemoteCommand.run [13] buildbot # [ 41.979856] twistd[822]: 2026-10-11T08:12:09+0000 [-] command '['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 41.990047] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 41.991283] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 41.995811] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev f5e87c3bf857193e8651a7277dd635dd9bd45dd0 --branch master --repo test-flake buildbot # [ 41.999892] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.003821] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 42.006976] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.011460] twistd[823]: 2026-10-11T08:12:09+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14476 0 0100 401 100 401 0 0 13263 0 0100 401 100 401 0 0 11470 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 42.296950] nix-daemon[1095]: accepted connection from pid 1107, user buildbot-worker buildbot # [ 42.328467] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.342779 buildbot # [ 42.331492] twistd[823]: 2026-10-11T08:12:09+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 42.338858] twistd[822]: 2026-10-11T08:12:09+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.499455] twistd[822]: 2026-10-11T08:12:10+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xefa5dbf71440>, logEnviron=False)): [] buildbot # [ 42.508907] twistd[822]: 2026-10-11T08:12:10+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 42.522921] twistd[822]: 2026-10-11T08:12:10+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 42.530679] twistd[822]: 2026-10-11T08:12:10+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 42.547262] twistd[822]: 2026-10-11T08:12:10+0000 [-] : RemoteCommand.run [14] buildbot # [ 42.555841] twistd[822]: 2026-10-11T08:12:10+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 42.558873] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 42.560404] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 42.563317] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev f5e87c3bf857193e8651a7277dd635dd9bd45dd0 --branch master --repo test-flake buildbot # [ 42.569374] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.573033] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 42.575820] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.581545] twistd[823]: 2026-10-11T08:12:10+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 42.799214] nix-daemon[1095]: accepted connection from pid 1116, user buildbot-worker buildbot # [ 42.830114] twistd[823]: 2026-10-11T08:12:10+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'f5e87c3bf857193e8651a7277dd635dd9bd45dd0', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.284580 buildbot # [ 42.838046] twistd[823]: 2026-10-11T08:12:10+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 42.841091] twistd[822]: 2026-10-11T08:12:10+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.875463] twistd[822]: 2026-10-11T08:12:10+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xefa5dbf71620>, hideStepIf=. at 0xefa5dbf716c0>, logEnviron=False)): [] buildbot # [ 42.889924] twistd[822]: 2026-10-11T08:12:10+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 42.891307] twistd[822]: 2026-10-11T08:12:10+0000 [-] : build finished buildbot # [ 42.899590] twistd[822]: 2026-10-11T08:12:10+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 24718 0 0100 411 100 411 0 0 20024 0 0100 411 100 411 0 0 17061 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.37 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) (finished: subtest: Schedule cache is created, in 0.04 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 54690 0 0100 3793 100 3793 0 0 52767 0 0100 3793 100 3793 0 0 51066 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.11 seconds) buildbot # [ 44.296672] sshd-session[1152]: Accepted publickey for root from ::1 port 54942 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.310642] sshd-session[1152]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.321091] systemd-logind[415]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.328872] systemd[1]: Started Session 7 of User root. buildbot # [ 44.362079] sshd-session[1155]: Received disconnect from ::1 port 54942:11: disconnected by user buildbot # [ 44.363850] sshd-session[1155]: Disconnected from user root ::1 port 54942 buildbot # [ 44.378778] sshd-session[1152]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.380470] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 44.381605] systemd-logind[415]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 44.384695] systemd-logind[415]: Removed session 7. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 34098 0 0100 3793 100 3793 0 0 33284 0 0100 3793 100 3793 0 0 32596 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds) buildbot # [ 44.620568] sshd-session[1163]: Accepted publickey for root from ::1 port 54948 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.631715] sshd-session[1163]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.642274] systemd-logind[415]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.648389] systemd[1]: Started Session 8 of User root. buildbot # [ 44.681086] sshd-session[1175]: Received disconnect from ::1 port 54948:11: disconnected by user buildbot # [ 44.684304] sshd-session[1175]: Disconnected from user root ::1 port 54948 buildbot # [ 44.685308] sshd-session[1163]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.689447] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 44.693324] systemd-logind[415]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 44.696893] systemd-logind[415]: Removed session 8. buildbot # [ 44.700726] twistd[822]: 2026-10-11T08:12:12+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39011 0 0100 3793 100 3793 0 0 38024 0 0100 3793 100 3793 0 0 37050 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39506 0 0100 3793 100 3793 0 0 38521 0 0100 3793 100 3793 0 0 37523 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # [ 47.871512] twistd[822]: 2026-10-11T08:12:15+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 47.875232] twistd[822]: 2026-10-11T08:12:15+0000 [-] beginning configuration update buildbot # [ 47.881087] twistd[822]: 2026-10-11T08:12:15+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 47.938391] twistd[822]: 2026-10-11T08:12:15+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 47.954729] twistd[822]: 2026-10-11T08:12:15+0000 [-] adding 1 new schedulers, removing 0 buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 48.127233] twistd[822]: 2026-10-11T08:12:15+0000 [-] configuration update complete (took 0.247 seconds) buildbot # 100 4079 100 4079 0 0 17698 0 0100 4079 100 4079 0 0 17511 0 0100 4079 100 4079 0 0 16943 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.34 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 53118 0 0100 4079 100 4079 0 0 51466 0 0100 4079 100 4079 0 0 49827 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds) (finished: subtest: Nightly schedulers are created, in 5.04 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 150.5k 0 0100 2371 100 2371 0 0 129.9k 0 0100 2371 100 2371 0 0 113.8k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.06 seconds) (finished: subtest: Scheduled effect builder exists, in 0.06 seconds) (finished: run the VM test script, in 49.11 seconds) test script finished in 49.15s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.23 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh