vm-test-run-scheduled-effects
checks.x86_64-linux.scheduled-effects
· build #75
· raw
1tribuchet: building on jamie2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.01 seconds)5Test will time out and terminate in 3600 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot # Disk image does not exist, creating the virtualisation disk image...11buildbot: QEMU running (pid 12)12buildbot # Formatting '/build/vm-state-buildbot/tmp.Y7j3CAklYp', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 27b23618-0d8d-44bb-a57d-c4025ff4498717buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)27buildbot # 28buildbot # 29buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA0030buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)...31buildbot # 32buildbot # 33buildbot # 34buildbot # 35buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB0036buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)...37buildbot # 38buildbot # 39buildbot # Booting from ROM...40buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 202641buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/3k4v8rkncxzl054gi9dwrajfr42ls16i-nixos-system-buildbot-test/init regInfo=/nix/store/vkbkz0aa3dh9c9ik71l265ainl30dfha-closure-info/registration console=ttyS0,115200n8 console=tty042buildbot # [ 0.000000] BIOS-provided physical RAM map:43buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable44buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved45buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved50buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved51buildbot # [ 0.000000] NX (Execute Disable) protection: active52buildbot # [ 0.000000] APIC: Static calls initialized53buildbot # [ 0.000000] SMBIOS 2.8 present.54buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201455buildbot # [ 0.000000] DMI: Memory slots populated: 1/156buildbot # [ 0.000000] Hypervisor detected: KVM57buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000058buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0059buildbot # [ 0.000000] kvm-clock: using sched offset of 503593082 cycles60buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns61buildbot # [ 0.000005] tsc: Detected 2400.012 MHz processor62buildbot # [ 0.000812] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000063buildbot # [ 0.000839] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs64buildbot # [ 0.000841] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT65buildbot # [ 0.002730] found SMP MP-table at [mem 0x000f5470-0x000f547f]66buildbot # [ 0.002741] Using GB pages for direct mapping67buildbot # [ 0.002812] RAMDISK: [mem 0x3e4ba000-0x3ffcffff]68buildbot # [ 0.002821] ACPI: Early table checksum verification disabled69buildbot # [ 0.002824] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )70buildbot # [ 0.002828] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)71buildbot # [ 0.002832] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)72buildbot # [ 0.002838] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001)73buildbot # [ 0.002840] ACPI: FACS 0x000000003FFE0000 00004074buildbot # [ 0.002842] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002843] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)76buildbot # [ 0.002845] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)77buildbot # [ 0.002846] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3]78buildbot # [ 0.002847] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f]79buildbot # [ 0.002848] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]80buildbot # [ 0.002848] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b]81buildbot # [ 0.002849] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3]82buildbot # [ 0.002849] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb]83buildbot # [ 0.003075] No NUMA configuration found84buildbot # [ 0.003076] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff]85buildbot # [ 0.003078] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff]86buildbot # [ 0.005855] Zone ranges:87buildbot # [ 0.005855] DMA [mem 0x0000000000001000-0x0000000000ffffff]88buildbot # [ 0.005857] DMA32 [mem 0x0000000001000000-0x000000003ffdafff]89buildbot # [ 0.005858] Normal empty90buildbot # [ 0.005859] Device empty91buildbot # [ 0.005859] Movable zone start for each node92buildbot # [ 0.005860] Early memory node ranges93buildbot # [ 0.005860] node 0: [mem 0x0000000000001000-0x000000000009efff]94buildbot # [ 0.005861] node 0: [mem 0x0000000000100000-0x000000003ffdafff]95buildbot # [ 0.005862] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff]96buildbot # [ 0.005927] On node 0, zone DMA: 1 pages in unavailable ranges97buildbot # [ 0.006198] On node 0, zone DMA: 97 pages in unavailable ranges98buildbot # [ 0.024501] On node 0, zone DMA32: 37 pages in unavailable ranges99buildbot # [ 0.024909] ACPI: PM-Timer IO Port: 0x608100buildbot # [ 0.024920] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])101buildbot # [ 0.024945] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23102buildbot # [ 0.024948] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)103buildbot # [ 0.024949] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)104buildbot # [ 0.024950] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)105buildbot # [ 0.024951] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)106buildbot # [ 0.024952] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)107buildbot # [ 0.024954] ACPI: Using ACPI (MADT) for SMP configuration information108buildbot # [ 0.024956] ACPI: HPET id: 0x8086a201 base: 0xfed00000109buildbot # [ 0.024958] TSC deadline timer available110buildbot # [ 0.024962] CPU topo: Max. logical packages: 1111buildbot # [ 0.024963] CPU topo: Max. logical dies: 1112buildbot # [ 0.024963] CPU topo: Max. dies per package: 1113buildbot # [ 0.024967] CPU topo: Max. threads per core: 1114buildbot # [ 0.024967] CPU topo: Num. cores per package: 1115buildbot # [ 0.024968] CPU topo: Num. threads per package: 1116buildbot # [ 0.024968] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs117buildbot # [ 0.024985] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()118buildbot # [ 0.025012] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]119buildbot # [ 0.025013] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]120buildbot # [ 0.025014] [mem 0x40000000-0xfeffbfff] available for PCI devices121buildbot # [ 0.025016] Booting paravirtualized kernel on KVM122buildbot # [ 0.025019] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns123buildbot # [ 0.029485] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1124buildbot # [ 0.031699] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152125buildbot # [ 0.031740] kvm-guest: PV spinlocks disabled, single CPU126buildbot # [ 0.031742] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/3k4v8rkncxzl054gi9dwrajfr42ls16i-nixos-system-buildbot-test/init regInfo=/nix/store/vkbkz0aa3dh9c9ik71l265ainl30dfha-closure-info/registration console=ttyS0,115200n8 console=tty0127buildbot # [ 0.031831] Unknown kernel command line parameters "regInfo=/nix/store/vkbkz0aa3dh9c9ik71l265ainl30dfha-closure-info/registration", will be passed to user space.128buildbot # [ 0.031844] random: crng init done129buildbot # [ 0.031845] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes130buildbot # [ 0.031865] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)131buildbot # [ 0.032417] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)132buildbot # [ 0.032448] Fallback order for Node 0: 0133buildbot # [ 0.032451] Built 1 zonelists, mobility grouping on. Total pages: 262009134buildbot # [ 0.032452] Policy zone: DMA32135buildbot # [ 0.034650] mem auto-init: stack:all(zero), heap alloc:on, heap free:off136buildbot # [ 0.037047] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1137buildbot # [ 0.039697] allocated 2097152 bytes of page_ext138buildbot # [ 0.049392] ftrace: allocating 48598 entries in 192 pages139buildbot # [ 0.049395] ftrace: allocated 192 pages with 2 groups140buildbot # [ 0.050242] Dynamic Preempt: lazy141buildbot # [ 0.050418] rcu: Preemptible hierarchical RCU implementation.142buildbot # [ 0.050419] rcu: RCU event tracing is enabled.143buildbot # [ 0.050419] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.144buildbot # [ 0.050421] Trampoline variant of Tasks RCU enabled.145buildbot # [ 0.050422] Rude variant of Tasks RCU enabled.146buildbot # [ 0.050422] Tracing variant of Tasks RCU enabled.147buildbot # [ 0.050423] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.148buildbot # [ 0.050423] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1149buildbot # [ 0.050445] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.150buildbot # [ 0.050446] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.151buildbot # [ 0.050447] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.152buildbot # [ 0.054941] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16153buildbot # [ 0.055217] rcu: srcu_init: Setting srcu_struct sizes based on contention.154buildbot # [ 0.055324] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)155buildbot # [ 0.058853] Console: colour VGA+ 80x25156buildbot # [ 0.058856] printk: legacy console [tty0] enabled157buildbot # [ 0.087029] printk: legacy console [ttyS0] enabled158buildbot # [ 0.188338] ACPI: Core revision 20250807159buildbot # [ 0.189263] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns160buildbot # [ 0.190929] APIC: Switch to symmetric I/O mode setup161buildbot # [ 0.191992] x2apic enabled162buildbot # [ 0.192744] APIC: Switched APIC routing to: physical x2apic163buildbot # [ 0.194637] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1164buildbot # [ 0.195673] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns165buildbot # [ 0.197436] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400012)166buildbot # [ 0.199449] x86/cpu: User Mode Instruction Prevention (UMIP) activated167buildbot # [ 0.200607] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127168buildbot # [ 0.201433] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0169buildbot # [ 0.202437] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto170buildbot # [ 0.203433] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl171buildbot # [ 0.204433] Transient Scheduler Attacks: Vulnerable: No microcode172buildbot # [ 0.205433] Spectre V2 : Mitigation: Enhanced / Automatic IBRS173buildbot # [ 0.206433] Speculative Return Stack Overflow: Mitigation: Safe RET174buildbot # [ 0.207433] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization175buildbot # [ 0.209437] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier176buildbot # [ 0.210434] active return thunk: srso_alias_return_thunk177buildbot # [ 0.211453] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'178buildbot # [ 0.212432] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'179buildbot # [ 0.213433] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'180buildbot # [ 0.215433] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'181buildbot # [ 0.216433] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'182buildbot # [ 0.217433] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'183buildbot # [ 0.219293] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'184buildbot # [ 0.220433] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256185buildbot # [ 0.221432] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64186buildbot # [ 0.222432] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512187buildbot # [ 0.223432] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024188buildbot # [ 0.224432] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8189buildbot # [ 0.225433] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format.190buildbot # [ 0.259224] Freeing SMP alternatives memory: 44K191buildbot # [ 0.260022] pid_max: default: 32768 minimum: 301192buildbot # [ 0.260535] LSM: initializing lsm=capability,landlock,yama,bpf,ima193buildbot # [ 0.261531] landlock: Up and running.194buildbot # [ 0.262433] Yama: becoming mindful.195buildbot # [ 0.263646] LSM support for eBPF active196buildbot # [ 0.264478] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)197buildbot # [ 0.265454] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)198buildbot # [ 0.268069] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)199buildbot # [ 0.268975] Performance Events: Fam17h+ core perfctr, AMD PMU driver.200buildbot # [ 0.269438] ... version: 2201buildbot # [ 0.270179] ... bit width: 48202buildbot # [ 0.270436] ... generic counters: 6203buildbot # [ 0.271183] ... generic bitmap: 000000000000003f204buildbot # [ 0.271484] ... fixed-purpose counters: 0205buildbot # [ 0.272227] ... fixed-purpose bitmap: 0000000000000000206buildbot # [ 0.272436] ... value mask: 0000ffffffffffff207buildbot # [ 0.273372] ... max period: 00007fffffffffff208buildbot # [ 0.274184] ... global_ctrl mask: 000000000000003f209buildbot # [ 0.274558] signal: max sigframe size: 3376210buildbot # [ 0.275448] rcu: Hierarchical SRCU implementation.211buildbot # [ 0.276292] rcu: Max phase no-delay instances is 400.212buildbot # [ 0.281615] smp: Bringing up secondary CPUs ...213buildbot # [ 0.282402] smp: Brought up 1 node, 1 CPU214buildbot # [ 0.283003] smpboot: Total of 1 processors activated (4800.02 BogoMIPS)215buildbot # [ 0.283627] Memory: 942400K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved)216buildbot # [ 0.284670] devtmpfs: initialized217buildbot # [ 0.285479] x86/mm: Memory block size: 128MB218buildbot # [ 0.287208] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns219buildbot # [ 0.288458] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)220buildbot # [ 0.289458] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).221buildbot # [ 0.290539] pinctrl core: initialized pinctrl subsystem222buildbot # [ 0.291722] PM: RTC time: 08:11:27, date: 2026-10-11223buildbot # [ 0.295267] NET: Registered PF_NETLINK/PF_ROUTE protocol family224buildbot # [ 0.296564] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations225buildbot # [ 0.297452] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations226buildbot # [ 0.298581] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations227buildbot # [ 0.299444] audit: initializing netlink subsys (disabled)228buildbot # [ 0.300668] thermal_sys: Registered thermal governor 'fair_share'229buildbot # [ 0.300670] thermal_sys: Registered thermal governor 'bang_bang'230buildbot # [ 0.301439] audit: type=2000 audit(1791706288.510:1): state=initialized audit_enabled=0 res=1231buildbot # [ 0.303436] thermal_sys: Registered thermal governor 'step_wise'232buildbot # [ 0.303438] thermal_sys: Registered thermal governor 'user_space'233buildbot # [ 0.304435] thermal_sys: Registered thermal governor 'power_allocator'234buildbot # [ 0.305466] cpuidle: using governor menu235buildbot # [ 0.307694] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5236buildbot # [ 0.308687] PCI: Using configuration type 1 for base access237buildbot # [ 0.309436] PCI: Using configuration type 1 for extended access238buildbot # [ 0.310620] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.239buildbot # [ 0.317460] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages240buildbot # [ 0.318436] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page241buildbot # [ 0.323437] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages242buildbot # [ 0.324436] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page243buildbot # [ 0.335707] ACPI: Added _OSI(Module Device)244buildbot # [ 0.336437] ACPI: Added _OSI(Processor Device)245buildbot # [ 0.337216] ACPI: Added _OSI(Processor Aggregator Device)246buildbot # [ 0.340150] ACPI: 1 ACPI AML tables successfully acquired and loaded247buildbot # [ 0.345667] ACPI: Interpreter enabled248buildbot # [ 0.346346] ACPI: PM: (supports S0 S3 S4 S5)249buildbot # [ 0.347008] ACPI: Using IOAPIC for interrupt routing250buildbot # [ 0.347452] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug251buildbot # [ 0.348435] PCI: Using E820 reservations for host bridge windows252buildbot # [ 0.351556] ACPI: Enabled 2 GPEs in block 00 to 0F253buildbot # [ 0.360538] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])254buildbot # [ 0.362042] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]255buildbot # [ 0.362722] acpiphp: Slot [3] registered256buildbot # [ 0.363466] acpiphp: Slot [4] registered257buildbot # [ 0.364175] acpiphp: Slot [5] registered258buildbot # [ 0.364455] acpiphp: Slot [6] registered259buildbot # [ 0.365192] acpiphp: Slot [7] registered260buildbot # [ 0.365466] acpiphp: Slot [8] registered261buildbot # [ 0.366180] acpiphp: Slot [9] registered262buildbot # [ 0.366457] acpiphp: Slot [10] registered263buildbot # [ 0.367203] acpiphp: Slot [11] registered264buildbot # [ 0.367465] acpiphp: Slot [12] registered265buildbot # [ 0.368188] acpiphp: Slot [13] registered266buildbot # [ 0.368454] acpiphp: Slot [14] registered267buildbot # [ 0.369197] acpiphp: Slot [15] registered268buildbot # [ 0.369464] acpiphp: Slot [16] registered269buildbot # [ 0.370179] acpiphp: Slot [17] registered270buildbot # [ 0.370455] acpiphp: Slot [18] registered271buildbot # [ 0.371205] acpiphp: Slot [19] registered272buildbot # [ 0.371454] acpiphp: Slot [20] registered273buildbot # [ 0.372208] acpiphp: Slot [21] registered274buildbot # [ 0.372455] acpiphp: Slot [22] registered275buildbot # [ 0.373208] acpiphp: Slot [23] registered276buildbot # [ 0.373455] acpiphp: Slot [24] registered277buildbot # [ 0.374183] acpiphp: Slot [25] registered278buildbot # [ 0.374464] acpiphp: Slot [26] registered279buildbot # [ 0.375209] acpiphp: Slot [27] registered280buildbot # [ 0.375455] acpiphp: Slot [28] registered281buildbot # [ 0.376173] acpiphp: Slot [29] registered282buildbot # [ 0.376460] acpiphp: Slot [30] registered283buildbot # [ 0.377207] acpiphp: Slot [31] registered284buildbot # [ 0.377483] PCI host bridge to bus 0000:00285buildbot # [ 0.378198] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]286buildbot # [ 0.378437] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]287buildbot # [ 0.379436] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]288buildbot # [ 0.380436] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]289buildbot # [ 0.381436] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]290buildbot # [ 0.382436] pci_bus 0000:00: root bus resource [bus 00-ff]291buildbot # [ 0.383604] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint292buildbot # [ 0.384866] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint293buildbot # [ 0.385867] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint294buildbot # [ 0.387465] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef]295buildbot # [ 0.388393] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk296buildbot # [ 0.389332] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk297buildbot # [ 0.390252] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk298buildbot # [ 0.391339] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk299buildbot # [ 0.392453] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint300buildbot # [ 0.394502] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f]301buildbot # [ 0.396671] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint302buildbot # [ 0.397724] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI303buildbot # [ 0.398442] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB304buildbot # [ 0.399654] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint305buildbot # [ 0.402465] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]306buildbot # [ 0.403449] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]307buildbot # [ 0.404413] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]308buildbot # [ 0.405390] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]309buildbot # [ 0.407205] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint310buildbot # [ 0.410443] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f]311buildbot # [ 0.412143] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]312buildbot # [ 0.412458] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]313buildbot # [ 0.413447] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]314buildbot # [ 0.415848] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint315buildbot # [ 0.418399] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f]316buildbot # [ 0.419128] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]317buildbot # [ 0.419485] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]318buildbot # [ 0.421741] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint319buildbot # [ 0.424309] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf]320buildbot # [ 0.425133] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]321buildbot # [ 0.425458] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]322buildbot # [ 0.428325] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint323buildbot # [ 0.431318] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f]324buildbot # [ 0.432115] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]325buildbot # [ 0.432457] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]326buildbot # [ 0.434637] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint327buildbot # [ 0.438472] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f]328buildbot # [ 0.439349] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]329buildbot # [ 0.440232] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]330buildbot # [ 0.442581] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint331buildbot # [ 0.445329] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f]332buildbot # [ 0.446442] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]333buildbot # [ 0.447451] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]334buildbot # [ 0.449674] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint335buildbot # [ 0.451470] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf]336buildbot # [ 0.452383] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]337buildbot # [ 0.453242] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]338buildbot # [ 0.454341] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref]339buildbot # [ 0.456491] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint340buildbot # [ 0.458474] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]341buildbot # [ 0.459458] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]342buildbot # [ 0.461647] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint343buildbot # [ 0.464492] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff]344buildbot # [ 0.465393] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]345buildbot # [ 0.466247] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]346buildbot # [ 0.468599] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint347buildbot # [ 0.470470] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df]348buildbot # [ 0.471357] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff]349buildbot # [ 0.472458] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]350buildbot # [ 0.477084] ACPI: PCI: Interrupt link LNKA configured for IRQ 10351buildbot # [ 0.477584] ACPI: PCI: Interrupt link LNKB configured for IRQ 10352buildbot # [ 0.478590] ACPI: PCI: Interrupt link LNKC configured for IRQ 11353buildbot # [ 0.479560] ACPI: PCI: Interrupt link LNKD configured for IRQ 11354buildbot # [ 0.480583] ACPI: PCI: Interrupt link LNKS configured for IRQ 9355buildbot # [ 0.482838] iommu: Default domain type: Translated356buildbot # [ 0.483443] iommu: DMA domain TLB invalidation policy: lazy mode357buildbot # [ 0.484706] ACPI: bus type USB registered358buildbot # [ 0.485491] usbcore: registered new interface driver usbfs359buildbot # [ 0.486459] usbcore: registered new interface driver hub360buildbot # [ 0.487384] usbcore: registered new device driver usb361buildbot # [ 0.489975] NetLabel: Initializing362buildbot # [ 0.490437] NetLabel: domain hash size = 128363buildbot # [ 0.491199] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO364buildbot # [ 0.492233] NetLabel: unlabeled traffic allowed by default365buildbot # [ 0.493200] PCI: Using ACPI for IRQ routing366buildbot # [ 0.494150] pci 0000:00:02.0: vgaarb: setting as boot VGA device367buildbot # [ 0.494431] pci 0000:00:02.0: vgaarb: bridge control possible368buildbot # [ 0.494431] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none369buildbot # [ 0.494437] vgaarb: loaded370buildbot # [ 0.495197] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0371buildbot # [ 0.495436] hpet0: 3 comparators, 64-bit 100.000000 MHz counter372buildbot # [ 0.499508] clocksource: Switched to clocksource kvm-clock373buildbot # [ 0.501061] VFS: Disk quotas dquot_6.6.0374buildbot # [ 0.503665] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)375buildbot # [ 0.505071] pnp: PnP ACPI init376buildbot # [ 0.506202] pnp: PnP ACPI: found 6 devices377buildbot # [ 0.513783] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns378buildbot # [ 0.515366] clocksource: Switched to clocksource acpi_pm379buildbot # [ 0.516407] NET: Registered PF_INET protocol family380buildbot # [ 0.517555] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)381buildbot # [ 0.534942] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)382buildbot # [ 0.536543] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)383buildbot # [ 0.537904] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)384buildbot # [ 0.539320] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)385buildbot # [ 0.540595] TCP: Hash tables configured (established 8192 bind 8192)386buildbot # [ 0.541748] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)387buildbot # [ 0.543103] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)388buildbot # [ 0.544258] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)389buildbot # [ 0.545498] NET: Registered PF_UNIX/PF_LOCAL protocol family390buildbot # [ 0.546545] NET: Registered PF_XDP protocol family391buildbot # [ 0.547431] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]392buildbot # [ 0.548489] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]393buildbot # [ 0.549550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]394buildbot # [ 0.550710] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]395buildbot # [ 0.551852] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]396buildbot # [ 0.553117] pci 0000:00:01.0: PIIX3: Enabling Passive Release397buildbot # [ 0.554122] pci 0000:00:00.0: Limiting direct PCI/PCI transfers398buildbot # [ 0.556572] ACPI: \_SB_.LNKD: Enabled at IRQ 11399buildbot # [ 0.559684] PCI: CLS 0 bytes, default 64400buildbot # [ 0.560623] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229842dd0bd, max_idle_ns: 440795319571 ns401buildbot # [ 0.562400] Trying to unpack rootfs image as initramfs...402buildbot # [ 0.606321] Initialise system trusted keyrings403buildbot # [ 0.609286] workingset: timestamp_bits=40 max_order=18 bucket_order=0404buildbot # [ 0.632381] Key type asymmetric registered405buildbot # [ 0.633099] Asymmetric key parser 'x509' registered406buildbot # [ 0.633996] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)407buildbot # [ 0.637332] io scheduler mq-deadline registered408buildbot # [ 0.638097] io scheduler kyber registered409buildbot # [ 0.641826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled410buildbot # [ 0.643162] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A411buildbot # [ 0.648302] Linux agpgart interface v0.103412buildbot # [ 0.649074] ACPI: bus type drm_connector registered413buildbot # [ 0.651374] usbcore: registered new interface driver usbserial_generic414buildbot # [ 0.652501] usbserial: USB Serial support registered for generic415buildbot # [ 0.655243] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.416buildbot # [ 0.655243] Please enable it if your BIOS has the CPPC option.417buildbot # [ 0.657593] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled418buildbot # [ 0.663352] drop_monitor: Initializing network drop monitor service419buildbot # [ 0.664569] NET: Registered PF_INET6 protocol family420buildbot # [ 0.667680] Segment Routing with IPv6421buildbot # [ 0.668403] In-situ OAM (IOAM) with IPv6422buildbot # [ 0.671526] IPI shorthand broadcast: enabled423buildbot # [ 0.680092] sched_clock: Marking stable (542015594, 137209049)->(756963725, -77739082)424buildbot # [ 0.683423] registered taskstats version 1425buildbot # [ 0.684422] Loading compiled-in X.509 certificates426buildbot # [ 0.702267] Demotion targets for Node 0: null427buildbot # [ 0.703147] Key type .fscrypt registered428buildbot # [ 0.706235] Key type fscrypt-provisioning registered429buildbot # [ 0.707170] ima: No TPM chip found, activating TPM-bypass!430buildbot # [ 0.708123] ima: Allocated hash algorithm: sha1431buildbot # [ 0.708956] ima: No architecture policies found432buildbot # [ 0.711236] PM: Magic number: 14:314:169433buildbot # [ 0.712867] RAS: Correctable Errors collector initialized.434buildbot # [ 0.722898] clk: Disabling unused clocks435buildbot # [ 0.725236] PM: genpd: Disabling unused power domains436buildbot # [ 0.876176] Freeing initrd memory: 27736K437buildbot # [ 0.879394] Freeing unused decrypted memory: 2028K438buildbot # [ 0.882054] Freeing unused kernel image (initmem) memory: 3636K439buildbot # [ 0.883157] Write protecting the kernel read-only data: 32768k440buildbot # [ 0.885130] Freeing unused kernel image (text/rodata gap) memory: 1272K441buildbot # [ 0.886736] Freeing unused kernel image (rodata/data gap) memory: 776K442buildbot # [ 0.938005] x86/mm: Checked W+X mappings: passed, no W+X pages found.443buildbot # [ 0.939124] Run /init as init process444buildbot # [ 0.949116] systemd[1]: Inserted module 'autofs4'445buildbot # [ 0.964790] fuse: init (API version 7.45)446buildbot # [ 0.971394] ACPI: \_SB_.LNKC: Enabled at IRQ 10447buildbot # [ 0.979117] ACPI: \_SB_.LNKA: Enabled at IRQ 10448buildbot # [ 0.982528] ACPI: \_SB_.LNKB: Enabled at IRQ 11449buildbot # [ 1.014381] systemd[1]: Successfully made /usr/ read-only.450buildbot # [ 1.351598] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)451buildbot # [ 1.363421] systemd[1]: Detected virtualization kvm.452buildbot # [ 1.365506] systemd[1]: Detected architecture x86-64.453buildbot # [ 1.367603] systemd[1]: Running in initrd.454buildbot # [ 1.370191] systemd[1]: Initializing machine ID from random generator.455buildbot # [ 1.373054] systemd[1]: Hostname set to <buildbot>.456buildbot # [ 1.440498] systemd[1]: Queued start job for default target Initrd Default Target.457buildbot # [ 1.444507] systemd[1]: Created slice Slice /system/modprobe.458buildbot # [ 1.445722] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.459buildbot # [ 1.447265] systemd[1]: Expecting device /dev/disk/by-label/nixos...460buildbot # [ 1.448714] systemd[1]: Reached target Path Units.461buildbot # [ 1.449712] systemd[1]: Reached target Slice Units.462buildbot # [ 1.450629] systemd[1]: Reached target Swaps.463buildbot # [ 1.451544] systemd[1]: Reached target Timer Units.464buildbot # [ 1.452572] systemd[1]: Listening on D-Bus System Message Bus Socket.465buildbot # [ 1.453806] systemd[1]: Listening on Journal Socket (/dev/log).466buildbot # [ 1.454995] systemd[1]: Listening on Journal Sockets.467buildbot # [ 1.456034] systemd[1]: Listening on udev Control Socket.468buildbot # [ 1.457071] systemd[1]: Listening on udev Kernel Socket.469buildbot # [ 1.458031] systemd[1]: Reached target Socket Units.470buildbot # [ 1.459947] systemd[1]: Starting Create List of Static Device Nodes...471buildbot # [ 1.464300] systemd[1]: Starting Load Kernel Module 9pnet_virtio...472buildbot # [ 1.469711] systemd[1]: Starting Load Kernel Module configfs...473buildbot # [ 1.484343] systemd[1]: Starting Journal Service...474buildbot # [ 1.495339] systemd[1]: Starting Load Kernel Modules...475buildbot # [ 1.502286] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki476buildbot # [ 1.511353] netfs: FS-Cache loaded477buildbot # [ 1.514933] systemd[1]: Starting Coldplug All udev Devices...478buildbot # [ 1.531548] 9pnet: Installing 9P2000 support479buildbot # [ 1.536329] systemd[1]: Finished Create List of Static Device Nodes.480buildbot # [ 1.544475] systemd[1]: modprobe@configfs.service: Deactivated successfully.481buildbot # [ 1.549249] systemd-journald[67]: Collecting audit messages is disabled.482buildbot # [ 1.553640] systemd[1]: Finished Load Kernel Module configfs.483buildbot # [ 1.579602] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.484buildbot # [ 1.586251] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev485buildbot # [ 1.605819] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.486buildbot # [ 1.612691] systemd[1]: Finished Load Kernel Module 9pnet_virtio.487buildbot # [ 1.618287] systemd[1]: Finished Load Kernel Modules.488buildbot # [ 1.622671] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config489buildbot # [ 1.631314] systemd[1]: Starting Apply Kernel Variables...490buildbot # [ 1.643310] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...491buildbot # [ 1.670431] systemd[1]: Started Journal Service.492buildbot # [ 1.531685] systemd-modules-load[68]: Inserted module 'dm_mod'493buildbot # [ 1.536925] systemd-modules-load[68]: Inserted module 'virtio_balloon'494buildbot # [ 1.539045] systemd-modules-load[68]: Inserted module 'virtio_gpu'495buildbot # [ 1.550231] systemd[1]: Finished Apply Kernel Variables.496buildbot # [ 1.553944] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.497buildbot # [ 1.558612] systemd[1]: Starting Create Static Device Nodes in /dev...498buildbot # [ 1.580134] systemd[1]: Finished Create Static Device Nodes in /dev.499buildbot # [ 1.581065] systemd[1]: Reached target Preparation for Local File Systems.500buildbot # [ 1.581934] systemd[1]: Reached target Local File Systems.501buildbot # [ 1.585249] systemd[1]: Starting Create System Files and Directories...502buildbot # [ 1.594068] systemd[1]: Starting Rule-based Manager for Device Events and Files...503buildbot # [ 1.616873] systemd[1]: Finished Create System Files and Directories.504buildbot # [ 1.639698] systemd-udevd[84]: Using default interface naming scheme 'v260'.505buildbot # [ 1.666204] systemd[1]: Started Rule-based Manager for Device Events and Files.506buildbot # [ 1.720631] systemd[1]: Finished Coldplug All udev Devices.507buildbot # [ 1.721891] systemd[1]: Reached target System Initialization.508buildbot # [ 1.724083] systemd[1]: Reached target Basic System.509buildbot # [ 2.033884] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12510buildbot # [ 2.056200] serio: i8042 KBD port at 0x60,0x64 irq 1511buildbot # [ 2.065053] serio: i8042 AUX port at 0x60,0x64 irq 12512buildbot # [ 2.074046] virtio_blk virtio5: 1/0/0 default/read/poll queues513buildbot # [ 2.095865] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)514buildbot # [ 2.146127] SCSI subsystem initialized515buildbot # [ 2.159467] uhci_hcd 0000:00:01.2: UHCI Host Controller516buildbot # [ 2.026854] (udev-worker)[89]: Network interface NamePolicy= disabled on kernel command line.517buildbot # [ 2.031420] systemd[1]: Starting Virtual Console Setup...518buildbot # [ 2.173960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0519buildbot # [ 2.048626] (udev-worker)[95]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.520buildbot # [ 2.050724] (udev-worker)[95]: Network interface NamePolicy= disabled on kernel command line.521buildbot # [ 2.205264] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1522buildbot # [ 2.074210] systemd-vconsole-setup[100]: Configuration of first virtual console was skipped, ignoring remaining ones.523buildbot # [ 2.078166] systemd[1]: Finished Virtual Console Setup.524buildbot # [ 2.216401] uhci_hcd 0000:00:01.2: detected 2 ports525buildbot # [ 2.217181] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100526buildbot # [ 2.090273] systemd[1]: Found device /dev/disk/by-label/nixos.527buildbot # [ 2.093062] systemd[1]: Reached target Initrd Root Device.528buildbot # [ 2.232336] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18529buildbot # [ 2.233450] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1530buildbot # [ 2.099189] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...531buildbot # [ 2.247879] usb usb1: Product: UHCI Host Controller532buildbot # [ 2.252246] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd533buildbot # [ 2.252975] usb usb1: SerialNumber: 0000:00:01.2534buildbot # [ 2.257826] hub 1-0:1.0: USB hub found535buildbot # [ 2.259092] hub 1-0:1.0: 2 ports detected536buildbot # [ 2.135608] systemd-fsck[107]: nixos: clean, 12/65536 files, 13019/262144 blocks537buildbot # [ 2.145429] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.538buildbot # [ 2.297173] scsi host0: ata_piix539buildbot # [ 2.297934] scsi host1: ata_piix540buildbot # [ 2.299649] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0541buildbot # [ 2.302763] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0542buildbot # [ 2.457672] ata2: found unknown device (class 0)543buildbot # [ 2.461177] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100544buildbot # [ 2.465331] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5545buildbot # [ 2.481320] usb 1-1: new full-speed USB device number 2 using uhci_hcd546buildbot # [ 2.517667] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray547buildbot # [ 2.526459] cdrom: Uniform CD-ROM driver Revision: 3.20548buildbot # [ 2.393028] systemd[1]: Mounting /sysroot...549buildbot # [ 2.640483] EXT4-fs (vda): mounted filesystem 27b23618-0d8d-44bb-a57d-c4025ff44987 r/w with ordered data mode. Quota mode: none.550buildbot # [ 2.510566] systemd[1]: Mounted /sysroot.551buildbot # [ 2.512835] systemd[1]: Reached target Initrd Root File System.552buildbot # [ 2.515710] systemd[1]: Mounting /sysroot/nix/.ro-store...553buildbot # [ 2.653688] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00554buildbot # [ 2.654827] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10555buildbot # [ 2.656505] usb 1-1: Product: QEMU USB Tablet556buildbot # [ 2.657112] usb 1-1: Manufacturer: QEMU557buildbot # [ 2.658395] usb 1-1: SerialNumber: 28754-0000:00:01.2-1558buildbot # [ 2.522932] systemd[1]: Mounting /sysroot/nix/.rw-store...559buildbot # [ 2.528191] systemd[1]: Mounting /sysroot/run...560buildbot # [ 2.541067] systemd[1]: Mounting /sysroot/tmp/shared...561buildbot # [ 2.551061] systemd[1]: Mounting /sysroot/tmp/xchg...562buildbot # [ 2.689854] hid: raw HID events driver (C) Jiri Kosina563buildbot # [ 2.557555] systemd[1]: Starting Mountpoints Configured in the Real Root...564buildbot # [ 2.704694] usbcore: registered new interface driver usbhid565buildbot # [ 2.707292] usbhid: USB HID core driver566buildbot # [ 2.715483] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2567buildbot # [ 2.720362] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0568buildbot # [ 2.743403] 9p: Installing v9fs 9p2000 file system support569buildbot # [ 2.614726] systemd-sysroot-fstab-check[130]: /sysroot should be mounted in the initrd, will request daemon-reload.570buildbot # [ 2.621735] systemd[1]: Mounted /sysroot/nix/.rw-store.571buildbot # [ 2.624310] systemd[1]: Mounted /sysroot/nix/.ro-store.572buildbot # [ 2.628088] systemd[1]: Mounted /sysroot/run.573buildbot # [ 2.628731] systemd[1]: Mounted /sysroot/tmp/shared.574buildbot # [ 2.629505] systemd[1]: Mounted /sysroot/tmp/xchg.575buildbot # [ 2.636812] systemd[1]: Reload requested from client PID 130 ('systemd-sysroot') (unit initrd-parse-etc.service)...576buildbot # [ 2.638377] systemd[1]: Reloading...577buildbot # [ 2.711314] systemd[1]: Reloading finished in 71 ms.578buildbot # [ 2.717715] systemd-sysroot-fstab-check[130]: Requesting initrd-fs.target/start/replace...579buildbot # [ 2.721105] systemd-sysroot-fstab-check[130]: Requesting swap.target/start/replace...580buildbot # [ 2.722714] systemd[1]: Starting rw-sysroot-nix-store.service...581buildbot # [ 2.727332] systemd[1]: initrd-parse-etc.service: Deactivated successfully.582buildbot # [ 2.728745] systemd[1]: Finished Mountpoints Configured in the Real Root.583buildbot # [ 2.729797] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.584buildbot # [ 2.739839] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.585buildbot # [ 2.741545] systemd[1]: Finished rw-sysroot-nix-store.service.586buildbot # [ 3.395557] systemd[1]: Mounting /sysroot/nix/store...587buildbot # [ 3.442142] systemd[1]: Mounted /sysroot/nix/store.588buildbot # [ 3.445110] systemd[1]: Reached target Initrd File Systems.589buildbot # [ 3.448246] systemd[1]: Starting Find NixOS closure...590buildbot # [ 3.453675] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...591buildbot # [ 3.475856] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.592buildbot # [ 3.477639] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.593buildbot # [ 3.486797] systemd[1]: Finished Find NixOS closure.594buildbot # [ 3.487876] systemd[1]: Reached target Initrd Default Target.595buildbot # [ 3.489699] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...596buildbot # [ 3.502893] systemd[1]: Stopped target Initrd Default Target.597buildbot # [ 3.504293] systemd[1]: Stopped target Basic System.598buildbot # [ 3.505224] systemd[1]: Stopped target Initrd Root Device.599buildbot # [ 3.506267] systemd[1]: Stopped target Path Units.600buildbot # [ 3.508251] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.601buildbot # [ 3.509310] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.602buildbot # [ 3.510340] systemd[1]: Stopped target Slice Units.603buildbot # [ 3.511199] systemd[1]: Stopped target Socket Units.604buildbot # [ 3.511894] systemd[1]: Stopped target System Initialization.605buildbot # [ 3.512747] systemd[1]: Stopped target Swaps.606buildbot # [ 3.513620] systemd[1]: Stopped target Timer Units.607buildbot # [ 3.514777] systemd[1]: dbus.socket: Deactivated successfully.608buildbot # [ 3.515743] systemd[1]: Closed D-Bus System Message Bus Socket.609buildbot # [ 3.517142] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.610buildbot # [ 3.518196] systemd[1]: Stopped Find NixOS closure.611buildbot # [ 3.518855] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio612buildbot # [ 3.521112] systemd[1]: Starting rw-sysroot-nix-store.service...613buildbot # [ 3.522151] systemd[1]: systemd-sysctl.service: Deactivated successfully.614buildbot # [ 3.523286] systemd[1]: Stopped Apply Kernel Variables.615buildbot # [ 3.525296] systemd[1]: systemd-modules-load.service: Deactivated successfully.616buildbot # [ 3.526501] systemd[1]: Stopped Load Kernel Modules.617buildbot # [ 3.527564] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.618buildbot # [ 3.529123] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.619buildbot # [ 3.530170] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.620buildbot # [ 3.531318] systemd[1]: Stopped Create System Files and Directories.621buildbot # [ 3.532489] systemd[1]: Stopped target Local File Systems.622buildbot # [ 3.534119] systemd[1]: Stopped target Preparation for Local File Systems.623buildbot # [ 3.535052] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.624buildbot # [ 3.536212] systemd[1]: Stopped Coldplug All udev Devices.625buildbot # [ 3.538741] systemd[1]: Stopping Rule-based Manager for Device Events and Files...626buildbot # [ 3.539767] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.627buildbot # [ 3.540759] systemd[1]: Stopped Virtual Console Setup.628buildbot # [ 3.550804] systemd[1]: initrd-cleanup.service: Deactivated successfully.629buildbot # [ 3.555190] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.630buildbot # [ 3.559075] systemd[1]: systemd-udevd.service: Deactivated successfully.631buildbot # [ 3.560773] systemd[1]: Stopped Rule-based Manager for Device Events and Files.632buildbot # [ 3.562320] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.633buildbot # [ 3.563761] systemd[1]: Finished rw-sysroot-nix-store.service.634buildbot # [ 3.566122] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.635buildbot # [ 3.567129] systemd[1]: Closed udev Control Socket.636buildbot # [ 3.568696] systemd[1]: Starting Cleanup udev Database...637buildbot # [ 3.569556] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.638buildbot # [ 3.571150] systemd[1]: Stopped Create Static Device Nodes in /dev.639buildbot # [ 3.571990] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.640buildbot # [ 3.573134] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.641buildbot # [ 3.575128] systemd[1]: kmod-static-nodes.service: Deactivated successfully.642buildbot # [ 3.576045] systemd[1]: Stopped Create List of Static Device Nodes.643buildbot # [ 3.590934] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.644buildbot # [ 3.592525] systemd[1]: Finished Cleanup udev Database.645buildbot # [ 3.593929] systemd[1]: Reached target Switch Root.646buildbot # [ 3.595977] systemd[1]: Starting NixOS Activation...647buildbot # [ 3.776818] initrd-nixos-activation-start[175]: booting system configuration /nix/store/3k4v8rkncxzl054gi9dwrajfr42ls16i-nixos-system-buildbot-test648buildbot # [ 3.848632] initrd-nixos-activation-start[175]: running activation script...649buildbot # [ 4.322964] initrd-nixos-activation-start[198]: setting up /etc...650buildbot # [ 4.604848] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.651buildbot # [ 4.607088] systemd[1]: Finished NixOS Activation.652buildbot # [ 4.608166] systemd[1]: Starting Switch Root...653buildbot # [ 4.623263] systemd[1]: Switching root.654buildbot # [ 4.778020] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).655buildbot # [ 4.963881] NET: Registered PF_VSOCK protocol family656buildbot # [ 5.355078] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)657buildbot # [ 5.364681] systemd[1]: Detected virtualization kvm.658buildbot # [ 5.366510] systemd[1]: Detected architecture x86-64.659buildbot # [ 5.368413] systemd[1]: Detected first boot.660buildbot # [ 5.377495] systemd[1]: Initializing machine ID from random generator.661buildbot # [ 5.658266] systemd[1]: bpf-restrict-fs: LSM BPF program attached662buildbot # [ 5.808597] systemd[1]: Applying preset policy.663buildbot # [ 6.288448] systemd[1]: Populated /etc with preset unit settings.664buildbot # [ 6.811360] systemd[1]: initrd-switch-root.service: Deactivated successfully.665buildbot # [ 6.812735] systemd[1]: Stopped initrd-switch-root.service.666buildbot # [ 6.816187] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.667buildbot # [ 6.818296] systemd[1]: Created slice Slice /system/getty.668buildbot # [ 6.819650] systemd[1]: Created slice User and Session Slice.669buildbot # [ 6.820585] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.670buildbot # [ 6.821787] systemd[1]: Started Forward Password Requests to Wall Directory Watch.671buildbot # [ 6.822929] systemd[1]: Expecting device /dev/hvc0...672buildbot # [ 6.823679] systemd[1]: Expecting device /dev/ttyS0...673buildbot # [ 6.824440] systemd[1]: Reached target Local Encrypted Volumes.674buildbot # [ 6.825325] systemd[1]: Stopped target initrd-fs.target.675buildbot # [ 6.826066] systemd[1]: Stopped target initrd-root-fs.target.676buildbot # [ 6.826859] systemd[1]: Stopped target initrd-switch-root.target.677buildbot # [ 6.827724] systemd[1]: Reached target Virtual Machines and Containers.678buildbot # [ 6.828639] systemd[1]: Reached target Path Units.679buildbot # [ 6.829373] systemd[1]: Reached target Remote File Systems.680buildbot # [ 6.830136] systemd[1]: Reached target Slice Units.681buildbot # [ 6.830852] systemd[1]: Reached target Swaps.682buildbot # [ 6.834788] systemd[1]: Listening on Query the User Interactively for a Password.683buildbot # [ 6.839669] systemd[1]: Listening on Process Core Dump Socket.684buildbot # [ 6.843101] systemd[1]: Listening on Credential Encryption/Decryption.685buildbot # [ 6.846725] systemd[1]: Listening on Factory Reset Management.686buildbot # [ 6.851528] systemd[1]: Starting Journal Log Access Socket...687buildbot # [ 6.853092] systemd[1]: Listening on Journal Audit Socket.688buildbot # [ 6.856963] systemd[1]: Listening on Console Output Muting Service Socket.689buildbot # [ 6.858147] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.690buildbot # [ 6.859609] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki691buildbot # [ 6.860914] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki692buildbot # [ 6.873369] systemd[1]: Listening on Disk Repartitioning Service Socket.693buildbot # [ 6.874455] systemd[1]: Listening on udev Control Socket.694buildbot # [ 6.875368] systemd[1]: Listening on udev Varlink Socket.695buildbot # [ 6.882129] systemd[1]: Mounting Huge Pages File System...696buildbot # [ 6.885853] systemd[1]: Mounting POSIX Message Queue File System...697buildbot # [ 6.889506] systemd[1]: Mounting Kernel Debug File System...698buildbot # [ 6.896382] systemd[1]: Mounting Kernel Trace File System...699buildbot # [ 6.906294] systemd[1]: Starting Create List of Static Device Nodes...700buildbot # [ 6.908365] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio701buildbot # [ 6.914696] systemd[1]: Starting Load Kernel Module configfs...702buildbot # [ 6.917514] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm703buildbot # [ 6.923669] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore704buildbot # [ 6.927857] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse705buildbot # [ 6.934817] systemd[1]: Mounting FUSE Control File System...706buildbot # [ 6.935936] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67707buildbot # [ 6.958865] systemd[1]: Starting Journal Service...708buildbot # [ 6.979713] systemd[1]: Starting Load Kernel Modules...709buildbot # [ 7.002678] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...710buildbot # [ 7.015452] systemd[1]: Starting Remount Root and Kernel File Systems...711buildbot # [ 7.020010] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki712buildbot # [ 7.036854] systemd[1]: Starting Coldplug All udev Devices...713buildbot # [ 7.050808] systemd[1]: Listening on Journal Log Access Socket.714buildbot # [ 7.059315] systemd[1]: Mounted Huge Pages File System.715buildbot # [ 7.060185] systemd[1]: Mounted POSIX Message Queue File System.716buildbot # [ 7.069601] systemd[1]: Mounted Kernel Debug File System.717buildbot # [ 7.074659] systemd-journald[267]: Collecting audit messages is enabled.718buildbot # [ 7.075810] systemd[1]: Mounted Kernel Trace File System.719buildbot # [ 7.081656] systemd[1]: Finished Create List of Static Device Nodes.720buildbot # [ 7.083962] loop: module loaded721buildbot # [ 7.088558] systemd[1]: modprobe@configfs.service: Deactivated successfully.722buildbot # [ 7.095532] systemd[1]: Finished Load Kernel Module configfs.723buildbot # [ 7.100675] systemd[1]: Mounted FUSE Control File System.724buildbot # [ 7.102259] EXT4-fs (vda): re-mounted 27b23618-0d8d-44bb-a57d-c4025ff44987.725buildbot # [ 6.976610] systemd[1]: Queued start job for default target Multi-User System.726buildbot # [ 6.978071] systemd[1]: systemd-journald.service: Deactivated successfully.727buildbot # [ 6.983221] systemd-modules-load[268]: Inserted module 'loop'728buildbot # [ 7.124471] systemd[1]: Mounting Kernel Configuration File System...729buildbot # [ 6.996443] systemd-modules-load[268]: Inserted module 'tls'730buildbot # [ 7.135255] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...731buildbot # [ 7.142129] systemd[1]: Started Journal Service.732buildbot # [ 7.018876] systemd[1]: Finished Load Kernel Modules.733buildbot # [ 7.027447] systemd[1]: Finished Remount Root and Kernel File Systems.734buildbot # [ 7.030254] systemd-oomd[269]: No swap; memory pressure usage will be degraded735buildbot # [ 7.045541] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.736buildbot # [ 7.056136] systemd[1]: Listening on Disk Image Download Service Socket.737buildbot # [ 7.065746] systemd[1]: Starting Flush Journal to Persistent Storage...738buildbot # [ 7.066952] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore739buildbot # [ 7.075195] systemd[1]: Starting Load/Save OS Random Seed...740buildbot # [ 7.082724] systemd[1]: Starting Apply Kernel Variables...741buildbot # [ 7.084880] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki742buildbot # [ 7.107551] systemd[1]: Mounted Kernel Configuration File System.743buildbot # [ 7.282468] systemd-journald[267]: Received client request to flush runtime journal.744buildbot # [ 7.245391] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.745buildbot # [ 7.248510] systemd[1]: Starting Create Static Device Nodes in /dev...746buildbot # [ 7.251297] systemd[1]: Finished Load/Save OS Random Seed.747buildbot # [ 7.252130] systemd[1]: Reached target First Boot Complete.748buildbot # [ 7.254137] systemd[1]: Finished Apply Kernel Variables.749buildbot # [ 7.254896] systemd[1]: Finished Flush Journal to Persistent Storage.750buildbot # [ 7.289076] systemd[1]: Finished Create Static Device Nodes in /dev.751buildbot # [ 7.290067] systemd[1]: Reached target Preparation for Local File Systems.752buildbot # [ 7.295808] systemd[1]: Starting Rule-based Manager for Device Events and Files...753buildbot # [ 7.363037] systemd[1]: Finished Coldplug All udev Devices.754buildbot # [ 7.402295] systemd-udevd[299]: Using default interface naming scheme 'v260'.755buildbot # [ 7.536439] systemd[1]: Started Rule-based Manager for Device Events and Files.756buildbot # [ 7.630967] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse757buildbot # [ 7.680465] systemd[1]: Mounting /run/wrappers...758buildbot # [ 7.681405] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.759buildbot # [ 7.712916] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.760buildbot # [ 7.728160] systemd[1]: Mounted /run/wrappers.761buildbot # [ 7.729934] systemd[1]: Reached target Local File Systems.762buildbot # [ 7.733312] systemd[1]: Listening on Boot Loader Control Service Socket.763buildbot # [ 7.737680] systemd[1]: Starting register-nix-paths.service...764buildbot # [ 7.742139] systemd[1]: Starting Create SUID/SGID Wrappers...765buildbot # [ 7.744921] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.766buildbot # [ 7.749068] systemd[1]: Starting Save Transient machine-id to Disk...767buildbot # [ 7.760072] systemd[1]: Starting Create System Files and Directories...768buildbot # [ 7.771571] (udev-worker)[306]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.769buildbot # [ 7.779132] (udev-worker)[306]: Network interface NamePolicy= disabled on kernel command line.770buildbot # [ 7.780871] (udev-worker)[311]: Network interface NamePolicy= disabled on kernel command line.771buildbot # [ 7.857385] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.772buildbot # [ 7.861692] systemd[1]: Finished Save Transient machine-id to Disk.773buildbot # [ 7.926266] systemd[1]: Finished Create System Files and Directories.774buildbot # [ 7.936602] systemd[1]: Starting Rebuild Journal Catalog...775buildbot # [ 7.943641] systemd[1]: Starting Record System Boot/Shutdown in UTMP...776buildbot # [ 8.023648] systemd[1]: Finished Record System Boot/Shutdown in UTMP.777buildbot # [ 8.057376] systemd[1]: Condition check resulted in Virtio network device being skipped.778buildbot # [ 8.059779] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore779buildbot # [ 8.062478] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.780buildbot # [ 8.064793] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67781buildbot # [ 8.066978] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore782buildbot # [ 8.068794] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki783buildbot # [ 8.071281] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki784buildbot # [ 8.079114] systemd[1]: Finished Rebuild Journal Catalog.785buildbot # [ 8.087325] systemd[1]: Starting Update is Completed...786buildbot # [ 8.138776] systemd[1]: Finished Update is Completed.787buildbot # [ 8.370132] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3788buildbot # [ 8.391509] mousedev: PS/2 mouse device common for all mice789buildbot # [ 8.413740] ACPI: button: Power Button [PWRF]790buildbot # [ 8.475750] rtc_cmos 00:05: RTC can wake from S4791buildbot # [ 8.500073] rtc_cmos 00:05: registered as rtc0792buildbot # [ 8.505071] parport_pc 00:03: reported by Plug and Play ACPI793buildbot # [ 8.510328] rtc_cmos 00:05: setting system clock to 2026-10-11T08:11:36 UTC (1791706296)794buildbot # [ 8.511959] systemd-journald[267]: Time jumped backwards, rotating.795buildbot # [ 8.520434] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]796buildbot # [ 8.538433] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs797buildbot # [ 8.541719] Floppy drive(s): fd0 is 2.88M AMI BIOS798buildbot # [ 8.426582] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.799buildbot # [ 8.430517] systemd[1]: Finished Create SUID/SGID Wrappers.800buildbot # [ 8.572114] FDC 0 is a S82078B801buildbot # [ 8.594072] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console802buildbot # [ 8.616313] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0803buildbot # [ 8.616392] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD804buildbot # [ 8.638284] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4805buildbot # [ 8.683550] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6806buildbot # [ 8.683795] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5807buildbot # [ 8.714475] Console: switching to colour dummy device 80x25808buildbot # [ 8.770130] [drm] Found bochs VGA, ID 0xb0c5.809buildbot # [ 8.770132] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.810buildbot # [ 8.782031] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic811buildbot # [ 8.782809] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0812buildbot # [ 8.670717] systemd[1]: Starting Virtual Console Setup...813buildbot # [ 8.884431] fbcon: bochs-drmdrmfb (fb0) is primary device814buildbot # [ 8.896231] ppdev: user-space parallel port driver815buildbot # [ 8.964265] Console: switching to colour frame buffer device 160x50816buildbot # [ 8.977888] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device817buildbot # [ 8.810753] systemd[1]: Finished register-nix-paths.service.818buildbot # [ 8.846818] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.819buildbot # [ 8.847907] systemd[1]: Stopped Virtual Console Setup.820buildbot # [ 8.855249] systemd[1]: Starting Virtual Console Setup...821buildbot # [ 8.874805] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.822buildbot # [ 8.876133] systemd[1]: Stopped Virtual Console Setup.823buildbot # [ 8.886561] systemd[1]: Starting Virtual Console Setup...824buildbot # [ 9.085602] kvm_amd: TSC scaling supported825buildbot # [ 9.086041] kvm_amd: Nested Virtualization enabled826buildbot # [ 9.086807] kvm_amd: Nested Paging enabled827buildbot # [ 9.087413] kvm_amd: LBR virtualization supported828buildbot # [ 9.087864] kvm_amd: Virtual VMLOAD VMSAVE supported829buildbot # [ 9.088489] kvm_amd: Virtual GIF supported830buildbot # [ 9.088972] kvm_amd: Virtual NMI enabled831buildbot # [ 9.137800] EDAC MC: Ver: 3.0.0832buildbot # [ 9.536693] systemd-vconsole-setup[401]: Configuration of first virtual console was skipped, ignoring remaining ones.833buildbot # [ 9.541274] systemd[1]: Finished Virtual Console Setup.834buildbot # [ 9.543141] systemd[1]: Reached target System Initialization.835buildbot # [ 9.544549] systemd[1]: Started Discard unused filesystem blocks once a week.836buildbot # [ 9.545645] systemd[1]: Started Daily Cleanup of Temporary Directories.837buildbot # [ 9.546802] systemd[1]: Reached target Timer Units.838buildbot # [ 9.547925] systemd[1]: Listening on D-Bus System Message Bus Socket.839buildbot # [ 9.549155] systemd[1]: Listening on Nix Daemon Socket.840buildbot # [ 9.552063] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).841buildbot # [ 9.553279] systemd[1]: Listening on Hostname Service Socket.842buildbot # [ 9.554044] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.843buildbot # [ 9.555191] systemd[1]: Reached target Socket Units.844buildbot # [ 9.555880] systemd[1]: Reached target Basic System.845buildbot # [ 9.559659] systemd[1]: Started backdoor.service.846buildbot # [ 9.564063] systemd[1]: Starting Import lastlog data into lastlog2 database...847buildbot # [ 9.566818] systemd[1]: Starting Name Service Cache Daemon (nsncd)...848buildbot # [ 9.571780] systemd[1]: Starting Post-Boot Actions...849buildbot # [ 9.580060] systemd[1]: Started Reset console on configuration changes.850buildbot # [ 9.586026] systemd[1]: Starting resolvconf update...851buildbot # [ 9.588282] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.852buildbot # [ 9.613902] systemd[1]: Starting D-Bus System Message Bus...853buildbot # [ 9.649113] systemd[1]: Finished Post-Boot Actions.854buildbot # connecting to host...855buildbot # [ 9.686575] systemd[1]: Started Name Service Cache Daemon (nsncd).856buildbot # [ 9.689481] systemd[1]: Reached target Host and Network Name Lookups.857buildbot # [ 9.690370] systemd[1]: Reached target User and Group Name Lookups.858buildbot # [ 9.692481] nsncd[407]: Oct 11 08:11:37.812 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"859buildbot # [ 9.703791] systemd[1]: Starting User Login Management...860buildbot: Guest shell says: b'Spawning backdoor root shell...\n'861buildbot: connected to guest root shell862buildbot # [ 9.718925] systemd[1]: Finished Import lastlog data into lastlog2 database.863buildbot: (connecting took 10.42 seconds)864buildbot: (finished: waiting for the VM to finish booting, in 10.67 seconds)865buildbot # [ 9.784539] dbus-broker-launch[412]: Looking up NSS user entry for 'systemd-timesync'...866buildbot # [ 9.828108] systemd-logind[432]: New seat seat0.867buildbot # [ 9.832631] systemd-logind[432]: Watching system buttons on /dev/input/event2 (Power Button)868buildbot # [ 9.834524] systemd-logind[432]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)869buildbot # [ 9.835776] systemd-logind[432]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)870buildbot # [ 9.843502] systemd[1]: Started User Login Management.871buildbot # [ 9.855073] dbus-broker-launch[412]: NSS returned no entry for 'systemd-timesync'872buildbot # [ 9.856139] dbus-broker-launch[412]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"873buildbot # [ 9.858159] systemd[1]: Stopped target Host and Network Name Lookups.874buildbot # [ 9.858968] systemd[1]: Stopping Host and Network Name Lookups...875buildbot # [ 9.859751] systemd[1]: Stopped target User and Group Name Lookups.876buildbot # [ 9.860678] systemd[1]: Stopping User and Group Name Lookups...877buildbot # [ 9.867863] systemd[1]: Starting linger-users.service...878buildbot # [ 9.870321] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...879buildbot # [ 9.876975] systemd[1]: nscd.service: Deactivated successfully.880buildbot # [ 9.880813] systemd[1]: Stopped Name Service Cache Daemon (nsncd).881buildbot # [ 9.903176] systemd[1]: Starting Name Service Cache Daemon (nsncd)...882buildbot # [ 9.906148] systemd[1]: Started D-Bus System Message Bus.883buildbot # [ 9.946175] dbus-broker-launch[412]: Ready884buildbot # [ 9.948792] systemd[1]: linger-users.service: Deactivated successfully.885buildbot # [ 9.950840] systemd[1]: Finished linger-users.service.886buildbot # [ 9.973450] systemd[1]: Started Name Service Cache Daemon (nsncd).887buildbot # [ 9.975413] nsncd[481]: Oct 11 08:11:38.101 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"888buildbot # [ 9.978454] systemd[1]: Reached target Host and Network Name Lookups.889buildbot # [ 9.979960] systemd[1]: Reached target User and Group Name Lookups.890buildbot # [ 9.995373] systemd[1]: Finished resolvconf update.891buildbot # [ 9.996772] systemd[1]: Reached target Preparation for Network.892buildbot # [ 10.001225] systemd[1]: Starting DHCP Client...893buildbot # [ 10.005065] systemd[1]: Starting Address configuration of eth1...894buildbot # [ 10.007735] systemd[1]: Starting Extra networking commands....895buildbot # [ 10.128565] network-addresses-eth1-start[511]: adding address 192.168.1.1/24... done896buildbot # [ 10.147821] network-addresses-eth1-start[511]: adding address 2001:db8:1::1/64... done897buildbot # [ 10.168829] systemd[1]: Finished Address configuration of eth1.898buildbot # [ 10.171618] dhcpcd[518]: dhcpcd-10.3.2 starting899buildbot # [ 10.184845] dhcpcd[566]: dev: loaded udev900buildbot # [ 10.188948] systemd[1]: Finished Extra networking commands..901buildbot # [ 10.191397] systemd[1]: Reached target Network.902buildbot # [ 10.196606] systemd[1]: Starting Nginx Web Server...903buildbot # [ 10.202481] systemd[1]: Starting PostgreSQL Server...904buildbot # [ 10.207135] systemd[1]: Starting SSH Daemon...905buildbot # [ 10.352687] 8021q: 802.1Q VLAN Support v1.8906buildbot # [ 10.353111] 8021q: adding VLAN 0 to HW filter on device eth1907buildbot # [ 10.218211] systemd[1]: Starting Permit User Sessions...908buildbot # [ 10.277427] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.909buildbot # [ 10.319402] systemd[1]: Finished Permit User Sessions.910buildbot # [ 10.331733] systemd[1]: Started Getty on tty1.911buildbot # [ 10.336540] systemd[1]: Reached target Login Prompts.912buildbot # [ 10.368461] sshd[573]: Server listening on 0.0.0.0 port 22.913buildbot # [ 10.370364] sshd[573]: Server listening on :: port 22.914buildbot # [ 10.372564] systemd[1]: Started SSH Daemon.915buildbot # [ 10.382772] systemd[1]: Starting Setup git test repository with scheduled effects...916buildbot # [ 10.552836] cfg80211: Loading compiled-in X.509 certificates for regulatory database917buildbot # [ 10.595121] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'918buildbot # [ 10.596592] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'919buildbot # [ 10.601936] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2920buildbot # [ 10.602845] cfg80211: failed to load regulatory.db921buildbot # [ 10.541445] setup-git-repo-start[596]: hint: Using 'master' as the name for the initial branch. This default branch name922buildbot # [ 10.542946] setup-git-repo-start[596]: hint: will change to "main" in Git 3.0. To configure the initial branch name923buildbot # [ 10.544848] setup-git-repo-start[596]: hint: to use in all of your new repositories, which will suppress this warning,924buildbot # [ 10.546281] setup-git-repo-start[596]: hint: call:925buildbot # [ 10.546980] setup-git-repo-start[596]: hint:926buildbot # [ 10.548200] setup-git-repo-start[596]: hint: git config --global init.defaultBranch <name>927buildbot # [ 10.550338] setup-git-repo-start[596]: hint:928buildbot # [ 10.550988] setup-git-repo-start[596]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and929buildbot # [ 10.554554] setup-git-repo-start[596]: hint: 'development'. The just-created branch can be renamed via this command:930buildbot # [ 10.555801] setup-git-repo-start[596]: hint:931buildbot # [ 10.556407] setup-git-repo-start[596]: hint: git branch -m <name>932buildbot # [ 10.557250] setup-git-repo-start[596]: hint:933buildbot # [ 10.557795] setup-git-repo-start[596]: hint: Disable this message with "git config set advice.defaultBranchName false"934buildbot # [ 10.559112] setup-git-repo-start[596]: Initialized empty Git repository in /srv/repos/test-flake.git/935buildbot # [ 10.706687] 8021q: adding VLAN 0 to HW filter on device eth0936buildbot # [ 10.573467] dhcpcd[566]: eth0: waiting for carrier937buildbot # [ 10.575238] dhcpcd[566]: eth0: carrier acquired938buildbot # [ 10.594446] dhcpcd[566]: DUID 00:01:00:01:32:5e:01:3a:52:54:00:12:34:56939buildbot # [ 10.595484] dhcpcd[566]: eth0: IAID 00:12:34:56940buildbot # [ 10.596798] dhcpcd[566]: eth0: adding address fe80::5054:ff:fe12:3456941buildbot # [ 10.599444] postgresql-pre-start[588]: The files belonging to this database system will be owned by user "postgres".942buildbot # [ 10.601037] postgresql-pre-start[588]: This user must also own the server process.943buildbot # [ 10.609497] nginx-pre-start[585]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok944buildbot # [ 10.611624] nginx-pre-start[585]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful945buildbot # [ 10.617728] postgresql-pre-start[588]: The database cluster will be initialized with locale "en_US.UTF-8".946buildbot # [ 10.618918] postgresql-pre-start[588]: The default database encoding has accordingly been set to "UTF8".947buildbot # [ 10.620098] postgresql-pre-start[588]: The default text search configuration will be set to "english".948buildbot # [ 10.621206] postgresql-pre-start[588]: Data page checksums are disabled.949buildbot # [ 10.622056] postgresql-pre-start[588]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok950buildbot # [ 10.623192] postgresql-pre-start[588]: creating subdirectories ... ok951buildbot # [ 10.625313] postgresql-pre-start[588]: selecting dynamic shared memory implementation ... posix952buildbot # [ 10.629755] systemd[1]: Started Nginx Web Server.953buildbot # [ 10.645475] setup-git-repo-start[610]: hint: Using 'master' as the name for the initial branch. This default branch name954buildbot # [ 10.647287] setup-git-repo-start[610]: hint: will change to "main" in Git 3.0. To configure the initial branch name955buildbot # [ 10.649080] setup-git-repo-start[610]: hint: to use in all of your new repositories, which will suppress this warning,956buildbot # [ 10.650660] setup-git-repo-start[610]: hint: call:957buildbot # [ 10.651764] setup-git-repo-start[610]: hint:958buildbot # [ 10.653350] setup-git-repo-start[610]: hint: git config --global init.defaultBranch <name>959buildbot # [ 10.654915] setup-git-repo-start[610]: hint:960buildbot # [ 10.655828] setup-git-repo-start[610]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and961buildbot # [ 10.657661] setup-git-repo-start[610]: hint: 'development'. The just-created branch can be renamed via this command:962buildbot # [ 10.659453] setup-git-repo-start[610]: hint:963buildbot # [ 10.660387] setup-git-repo-start[610]: hint: git branch -m <name>964buildbot # [ 10.661292] setup-git-repo-start[610]: hint:965buildbot # [ 10.661850] setup-git-repo-start[610]: hint: Disable this message with "git config set advice.defaultBranchName false"966buildbot # [ 10.663102] setup-git-repo-start[610]: Initialized empty Git repository in /tmp/test-flake/.git/967buildbot # [ 10.735392] setup-git-repo-start[621]: [master (root-commit) a08b71f] Initial commit with scheduled effects968buildbot # [ 10.738115] setup-git-repo-start[621]: 3 files changed, 131 insertions(+)969buildbot # [ 10.738972] setup-git-repo-start[621]: create mode 100644 effects-lib.nix970buildbot # [ 10.739866] setup-git-repo-start[621]: create mode 100644 flake.lock971buildbot # [ 10.741090] setup-git-repo-start[621]: create mode 100644 flake.nix972buildbot # [ 10.765832] postgresql-pre-start[588]: selecting default "max_connections" ... 100973buildbot # [ 10.839367] setup-git-repo-start[626]: To /srv/repos/test-flake.git974buildbot # [ 10.840485] setup-git-repo-start[626]: * [new branch] master -> master975buildbot # [ 10.842087] setup-git-repo-start[626]: branch 'master' set up to track 'origin/master'.976buildbot # [ 10.846956] systemd[1]: Finished Setup git test repository with scheduled effects.977buildbot # [ 10.848248] postgresql-pre-start[588]: selecting default "shared_buffers" ... 128MB978buildbot: (finished: waiting for unit sshd.service, in 11.96 seconds)979buildbot: waiting for unit setup-git-repo.service980buildbot: (finished: waiting for unit setup-git-repo.service, in 0.08 seconds)981buildbot: waiting for unit multi-user.target982buildbot # [ 12.217460] dhcpcd[566]: eth0: soliciting a DHCP lease983buildbot # [ 12.372927] NET: Registered PF_PACKET protocol family984buildbot # [ 12.240609] dhcpcd[566]: eth0: offered 10.0.2.15 from 10.0.2.2985buildbot # [ 12.244126] dhcpcd[566]: eth0: probing address 10.0.2.15/24986buildbot # [ 12.590943] dhcpcd[566]: eth0: soliciting an IPv6 router987buildbot # [ 12.592420] dhcpcd[566]: eth0: Router Advertisement from fe80::2988buildbot # [ 12.593467] dhcpcd[566]: eth0: adding address fec0::5054:ff:fe12:3456/64989buildbot # [ 12.594499] dhcpcd[566]: eth0: adding route to fec0::/64990buildbot # [ 12.595426] dhcpcd[566]: eth0: adding default route via fe80::2991buildbot # [ 13.055329] postgresql-pre-start[588]: selecting default time zone ... UTC992buildbot # [ 13.062152] postgresql-pre-start[588]: creating configuration files ... ok993buildbot # [ 13.334953] postgresql-pre-start[588]: running bootstrap script ... ok994buildbot # [ 13.974041] postgresql-pre-start[588]: performing post-bootstrap initialization ... ok995buildbot # [ 14.131143] postgresql-pre-start[588]: syncing data to disk ... ok996buildbot # [ 14.133106] postgresql-pre-start[588]: initdb: warning: enabling "trust" authentication for local connections997buildbot # [ 14.134380] postgresql-pre-start[588]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.998buildbot # [ 14.136222] postgresql-pre-start[588]: Success. You can now start the database server using:999buildbot # [ 14.137279] postgresql-pre-start[588]: pg_ctl -D /var/lib/postgresql/17 -l logfile start1000buildbot # [ 14.266822] postgres[689]: [689] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1001buildbot # [ 14.284069] postgres[689]: [689] LOG: listening on IPv6 address "::1", port 54321002buildbot # [ 14.285177] postgres[689]: [689] LOG: listening on IPv4 address "127.0.0.1", port 54321003buildbot # [ 14.289710] postgres[689]: [689] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1004buildbot # [ 14.302228] postgres[695]: [695] LOG: database system was shut down at 2026-10-11 08:11:42 GMT1005buildbot # [ 14.310590] postgres[689]: [689] LOG: database system is ready to accept connections1006buildbot # [ 14.318520] systemd[1]: Started PostgreSQL Server.1007buildbot # [ 14.323435] systemd[1]: Starting PostgreSQL Setup Scripts...1008buildbot # [ 14.549759] postgresql-setup-start[710]: CREATE DATABASE1009buildbot # [ 14.602129] postgresql-setup-start[720]: CREATE ROLE1010buildbot # [ 14.628146] postgresql-setup-start[722]: ALTER DATABASE1011buildbot # [ 14.634465] systemd[1]: Finished PostgreSQL Setup Scripts.1012buildbot # [ 14.636381] systemd[1]: Reached target PostgreSQL.1013buildbot # [ 14.640324] systemd[1]: Starting Buildbot Continuous Integration Server....1014buildbot # [ 14.702721] buildbot-master-pre-start[727]: mkdir: created directory '/var/lib/buildbot/master'1015buildbot # [ 16.911934] dhcpcd[566]: eth0: leased 10.0.2.15 for 86400 seconds1016buildbot # [ 16.913405] dhcpcd[566]: eth0: adding route to 10.0.2.0/241017buildbot # [ 16.914441] dhcpcd[566]: eth0: adding default route via 10.0.2.21018buildbot # [ 17.031692] systemd[1]: Started DHCP Client.1019buildbot # [ 22.528373] buildbot-master-pre-start[729]: updating existing installation1020buildbot # [ 22.529453] buildbot-master-pre-start[729]: not touching existing buildbot.tac1021buildbot # [ 22.530452] buildbot-master-pre-start[729]: creating buildbot.tac.new instead1022buildbot # [ 22.531346] buildbot-master-pre-start[729]: creating /var/lib/buildbot/master/master.cfg.sample1023buildbot # [ 22.532478] buildbot-master-pre-start[729]: creating database (postgresql://@/buildbot)1024buildbot # [ 22.535095] buildbot-master-pre-start[729]: buildmaster configured in /var/lib/buildbot/master1025buildbot # [ 22.722346] systemd[1]: Started Buildbot Continuous Integration Server..1026buildbot # [ 22.727677] systemd[1]: Started Buildbot Worker..1027buildbot # [ 22.728755] systemd[1]: Reached target Multi-User System.1028buildbot # [ 22.729777] systemd[1]: Startup finished in 805ms (kernel) + 3.954s (initrd) + 17.969s (userspace) = 22.729s.1029buildbot: (finished: waiting for unit multi-user.target, in 12.15 seconds)1030subtest: Master and worker services start1031buildbot: waiting for unit buildbot-master.service1032buildbot: (finished: waiting for unit buildbot-master.service, in 0.11 seconds)1033buildbot: waiting for unit buildbot-worker.service1034buildbot: (finished: waiting for unit buildbot-worker.service, in 0.10 seconds)1035buildbot: waiting for TCP port 8010 on localhost1036buildbot # [ 24.318584] twistd[847]: Starting worker local-worker-0001037buildbot # [ 24.320249] twistd[847]: 2026-10-11T08:11:51+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1038buildbot # [ 24.321841] twistd[847]: 2026-10-11T08:11:52+0000 [-] Loaded.1039buildbot # [ 24.322723] twistd[847]: 2026-10-11T08:11:52+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1040buildbot # [ 24.325490] twistd[847]: 2026-10-11T08:11:52+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1041buildbot # [ 24.327565] twistd[847]: 2026-10-11T08:11:52+0000 [-] Starting Worker -- version: 2026.06.261042buildbot # [ 24.328608] twistd[847]: 2026-10-11T08:11:52+0000 [-] recording hostname in twistd.hostname1043buildbot # [ 24.329626] twistd[847]: 2026-10-11T08:11:52+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x76aea9ba8590>1044buildbot # [ 24.339466] twistd[847]: 2026-10-11T08:11:52+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x76aea9ba8ad0> in 2.4157623664470753 seconds.1045buildbot # [ 24.341885] twistd[847]: 2026-10-11T08:11:52+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x76aea9ba8590>1046buildbot # [ 26.710913] twistd[846]: 2026-10-11T08:11:51+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1047buildbot # [ 26.712720] twistd[846]: 2026-10-11T08:11:54+0000 [-] Loaded.1048buildbot # [ 26.713657] twistd[846]: 2026-10-11T08:11:54+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1049buildbot # [ 26.715751] twistd[846]: 2026-10-11T08:11:54+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1050buildbot # [ 26.717656] twistd[846]: 2026-10-11T08:11:54+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01051buildbot # [ 26.729510] twistd[846]: 2026-10-11T08:11:54+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1052buildbot # [ 26.758128] twistd[847]: 2026-10-11T08:11:54+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x76aea9ba8590>1053buildbot # [ 26.762087] twistd[847]: 2026-10-11T08:11:54+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x76aea9ba8ad0> in 2.4398713748396768 seconds.1054buildbot # [ 26.764596] twistd[847]: 2026-10-11T08:11:54+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x76aea9ba8590>1055buildbot # [ 27.880920] twistd[846]: 2026-10-11T08:11:56+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1056buildbot # [ 27.997834] twistd[846]: 2026-10-11T08:11:56+0000 [-] adding 9 new builders, removing 01057buildbot # [ 28.092035] twistd[846]: 2026-10-11T08:11:56+0000 [-] adding 3 new services, removing 01058buildbot # [ 28.240763] twistd[846]: 2026-10-11T08:11:56+0000 [-] adding 1 new change_sources, removing 01059buildbot # [ 28.244959] twistd[846]: 2026-10-11T08:11:56+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1060buildbot # [ 28.251982] twistd[846]: 2026-10-11T08:11:56+0000 [-] adding 14 new schedulers, removing 01061buildbot # [ 28.416581] twistd[846]: 2026-10-11T08:11:56+0000 [-] BuildbotSite starting on 80101062buildbot # [ 28.418194] twistd[846]: 2026-10-11T08:11:56+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x713470690ad0>1063buildbot # [ 28.420184] twistd[846]: 2026-10-11T08:11:56+0000 [-] adding 5 new workers, removing 01064buildbot # [ 28.431818] twistd[846]: 2026-10-11T08:11:56+0000 [-] PBServerFactory starting on 99891065buildbot # [ 28.432974] twistd[846]: 2026-10-11T08:11:56+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x713470691550>1066buildbot # [ 28.459120] twistd[846]: 2026-10-11T08:11:56+0000 [-] Starting Worker -- version: 2026.06.261067buildbot # [ 28.460302] twistd[846]: 2026-10-11T08:11:56+0000 [-] recording hostname in twistd.hostname1068buildbot # [ 28.461641] twistd[846]: 2026-10-11T08:11:56+0000 [-] message from master: attached1069buildbot # [ 28.464107] twistd[846]: 2026-10-11T08:11:56+0000 [-] Got workerinfo from '__Janitor'1070buildbot # [ 28.474062] twistd[846]: 2026-10-11T08:11:56+0000 [-] bot attached1071buildbot # [ 28.474855] twistd[846]: 2026-10-11T08:11:56+0000 [-] Worker __Janitor attached to __Janitor1072buildbot # [ 28.475967] twistd[846]: 2026-10-11T08:11:56+0000 [-] message from master: attached1073buildbot # [ 28.515669] twistd[846]: 2026-10-11T08:11:56+0000 [-] BuildMaster is running1074buildbot # [ 28.589143] sshd-session[911]: Accepted publickey for root from ::1 port 41202 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81075buildbot # [ 28.604079] sshd-session[911]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1076buildbot # [ 28.657367] systemd[1]: Created slice Slice /user/0.1077buildbot # [ 28.661825] systemd[1]: Starting User Runtime Directory /run/user/0...1078buildbot # [ 28.671925] systemd-logind[432]: New session '1' of user 'root' with class 'user' and type 'tty'.1079buildbot # [ 28.714576] systemd[1]: Finished User Runtime Directory /run/user/0.1080buildbot # [ 28.719593] systemd[1]: Starting User Manager for UID 0...1081buildbot # [ 28.778496] (systemd)[919]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1082buildbot # [ 28.786064] systemd-logind[432]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1083buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1084buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.34 seconds)1085buildbot: waiting for success: curl --fail --head http://localhost:80101086buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1087buildbot # Dload Upload Total Spent Left Speed1088buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01089buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.20 seconds)1090(finished: subtest: Master and worker services start, in 5.75 seconds)1091subtest: Project is registered1092buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1093buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1094buildbot # Dload Upload Total Spent Left Speed1095buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 9223 0 0100 266 100 266 0 0 7269 0 0100 266 100 266 0 0 6142 0 01096buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.11 seconds)1097(finished: subtest: Project is registered, in 0.11 seconds)1098subtest: CLI list-schedules works1099buildbot: must succeed: 1100 cd /tmp/test-flake1101 buildbot-effects list-schedules1102 1103buildbot # [ 29.192794] systemd[919]: Queued start job for default target Main User Target.1104buildbot # [ 29.197255] systemd[919]: Created slice User Application Slice.1105buildbot # [ 29.198235] systemd[919]: Started Daily Cleanup of User's Temporary Directories.1106buildbot # [ 29.200079] systemd[919]: Reached target Paths.1107buildbot # [ 29.200781] systemd[919]: Reached target Timers.1108buildbot # [ 29.204088] systemd[919]: Starting D-Bus User Message Bus Socket...1109buildbot # [ 29.206653] twistd[847]: 2026-10-11T08:11:57+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x76aea9ba8590>1110buildbot # [ 29.209684] systemd[919]: Starting Create User Files and Directories...1111buildbot # [ 29.220498] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=41750)1112buildbot # [ 29.224304] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1113buildbot # [ 29.235070] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1114buildbot # [ 29.250333] twistd[846]: 2026-10-11T08:11:57+0000 [-] bot attached1115buildbot # [ 29.258639] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1116buildbot # [ 29.260338] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1117buildbot # [ 29.262253] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1118buildbot # [ 29.265542] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1119buildbot # [ 29.266885] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1120buildbot # [ 29.268338] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1121buildbot # [ 29.269765] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1122buildbot # [ 29.271152] twistd[846]: 2026-10-11T08:11:57+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1123buildbot # [ 29.274362] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1124buildbot # [ 29.275947] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1125buildbot # [ 29.277861] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1126buildbot # [ 29.279204] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1127buildbot # [ 29.280817] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1128buildbot # [ 29.282284] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1129buildbot # [ 29.283782] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1130buildbot # [ 29.285367] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] message from master: attached1131buildbot # [ 29.303120] systemd[919]: Finished Create User Files and Directories.1132buildbot # [ 29.306098] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] Connected to buildmaster; worker is ready1133buildbot # [ 29.309163] twistd[847]: 2026-10-11T08:11:57+0000 [Broker,client] sending application-level keepalives every 600 seconds1134buildbot # [ 29.390192] systemd[919]: Listening on D-Bus User Message Bus Socket.1135buildbot # [ 29.395697] systemd[919]: Reached target Sockets.1136buildbot # [ 29.397169] systemd[919]: Reached target Basic System.1137buildbot # [ 29.397894] systemd[919]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1138buildbot # [ 29.404209] systemd[919]: Reached target Main User Target.1139buildbot # [ 29.405099] systemd[919]: Startup finished in 575ms.1140buildbot # [ 29.405807] systemd[1]: Started User Manager for UID 0.1141buildbot # [ 29.406546] systemd[1]: Started Session 1 of User root.1142buildbot # [ 29.480838] sshd-session[950]: Received disconnect from ::1 port 41202:11: disconnected by user1143buildbot # [ 29.482876] sshd-session[950]: Disconnected from user root ::1 port 412021144buildbot # [ 29.484084] sshd-session[911]: pam_unix(sshd:session): session closed for user root1145buildbot # [ 29.492474] systemd[1]: session-1.scope: Deactivated successfully.1146buildbot # [ 29.493451] systemd-logind[432]: Session 1 logged out. Waiting for processes to exit.1147buildbot # [ 29.499080] systemd-logind[432]: Removed session 1.1148buildbot # [ 29.707738] sshd-session[955]: Accepted publickey for root from ::1 port 41214 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81149buildbot # [ 29.732664] sshd-session[955]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1150buildbot # [ 29.743444] systemd-logind[432]: New session '3' of user 'root' with class 'user' and type 'tty'.1151buildbot # [ 29.745714] systemd[1]: Started Session 3 of User root.1152buildbot # [ 29.800191] sshd-session[964]: Received disconnect from ::1 port 41214:11: disconnected by user1153buildbot # [ 29.801753] sshd-session[964]: Disconnected from user root ::1 port 412141154buildbot # [ 29.803836] sshd-session[955]: pam_unix(sshd:session): session closed for user root1155buildbot # [ 29.809105] systemd[1]: session-3.scope: Deactivated successfully.1156buildbot # [ 29.812967] systemd-logind[432]: Session 3 logged out. Waiting for processes to exit.1157buildbot # [ 29.814957] systemd-logind[432]: Removed session 3.1158buildbot # [ 29.844290] twistd[846]: 2026-10-11T08:11:57+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1159buildbot: (finished: must succeed: 1160 cd /tmp/test-flake1161 buildbot-effects list-schedules1162 , in 0.83 seconds)1163(finished: subtest: CLI list-schedules works, in 0.83 seconds)1164subtest: Push a new commit to trigger build1165buildbot: must succeed: 1166 cd /tmp/test-flake1167 echo "# trigger rebuild" >> flake.nix1168 git add flake.nix1169 git commit -m "Trigger build"1170 git push origin master1171 1172buildbot # Enumerating objects: 5, done.1173buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1174buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1175buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 296.00 KiB/s, done.1176buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1177buildbot # To /srv/repos/test-flake.git1178buildbot # a08b71f..5ce7cf3 master -> master1179buildbot: (finished: must succeed: 1180 cd /tmp/test-flake1181 echo "# trigger rebuild" >> flake.nix1182 git add flake.nix1183 git commit -m "Trigger build"1184 git push origin master1185 , in 0.12 seconds)1186(finished: subtest: Push a new commit to trigger build, in 0.12 seconds)1187subtest: Wait for nix-eval build to complete1188buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1189buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1190buildbot # Dload Upload Total Spent Left Speed1191buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2561 0 0100 51 100 51 0 0 2060 0 0100 51 100 51 0 0 1739 0 01192buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1193buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1194buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1195buildbot # Dload Upload Total Spent Left Speed1196buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2008 0 0100 51 100 51 0 0 1703 0 0100 51 100 51 0 0 1478 0 01197buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1198buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1199buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1200buildbot # Dload Upload Total Spent Left Speed1201buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1879 0 0100 51 100 51 0 0 1596 0 0100 51 100 51 0 0 1398 0 01202buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1203buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1204buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1205buildbot # Dload Upload Total Spent Left Speed1206buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1803 0 0100 51 100 51 0 0 1544 0 0100 51 100 51 0 0 1355 0 01207buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1208buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1209buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1210buildbot # Dload Upload Total Spent Left Speed1211buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1967 0 0100 51 100 51 0 0 1672 0 0100 51 100 51 0 0 1452 0 01212buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1213buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1214buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1215buildbot # Dload Upload Total Spent Left Speed1216buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1778 0 0100 51 100 51 0 0 1516 0 0100 51 100 51 0 0 1334 0 01217buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1218buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1219buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1220buildbot # Dload Upload Total Spent Left Speed1221buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1965 0 0100 51 100 51 0 0 1655 0 0100 51 100 51 0 0 1443 0 01222buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1223buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1224buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1225buildbot # Dload Upload Total Spent Left Speed1226buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2001 0 0100 51 100 51 0 0 1685 0 0100 51 100 51 0 0 1462 0 01227buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1228buildbot # [ 38.511908] sshd-session[1025]: Accepted publickey for root from ::1 port 52178 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81229buildbot # [ 38.533815] sshd-session[1025]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1230buildbot # [ 38.548453] systemd-logind[432]: New session '4' of user 'root' with class 'user' and type 'tty'.1231buildbot # [ 38.551734] systemd[1]: Started Session 4 of User root.1232buildbot # [ 38.593973] sshd-session[1028]: Received disconnect from ::1 port 52178:11: disconnected by user1233buildbot # [ 38.595336] sshd-session[1028]: Disconnected from user root ::1 port 521781234buildbot # [ 38.596470] sshd-session[1025]: pam_unix(sshd:session): session closed for user root1235buildbot # [ 38.608268] systemd[1]: session-4.scope: Deactivated successfully.1236buildbot # [ 38.611271] systemd-logind[432]: Session 4 logged out. Waiting for processes to exit.1237buildbot # [ 38.612691] systemd-logind[432]: Removed session 4.1238buildbot # [ 38.817921] sshd-session[1033]: Accepted publickey for root from ::1 port 52180 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81239buildbot # [ 38.839090] sshd-session[1033]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1240buildbot # [ 38.853375] systemd-logind[432]: New session '5' of user 'root' with class 'user' and type 'tty'.1241buildbot # [ 38.856606] systemd[1]: Started Session 5 of User root.1242buildbot # [ 38.911049] sshd-session[1036]: Received disconnect from ::1 port 52180:11: disconnected by user1243buildbot # [ 38.913981] sshd-session[1036]: Disconnected from user root ::1 port 521801244buildbot # [ 38.915546] sshd-session[1033]: pam_unix(sshd:session): session closed for user root1245buildbot # [ 38.923260] systemd[1]: session-5.scope: Deactivated successfully.1246buildbot # [ 38.926189] systemd-logind[432]: Session 5 logged out. Waiting for processes to exit.1247buildbot # [ 38.928456] systemd-logind[432]: Removed session 5.1248buildbot # [ 38.945556] twistd[846]: 2026-10-11T08:12:07+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1249buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1250buildbot # [ 38.981208] twistd[846]: 2026-10-11T08:12:07+0000 [-] gitpoller: processing 1 changes: ['5ce7cf3dca665683909ef44694ee554e4238e15f'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1251buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1252buildbot # Dload Upload Total Spent Left Speed1253buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2008 0 0100 51 100 51 0 0 1576 0 0100 51 100 51 0 0 1307 0 01254buildbot # [ 39.099191] twistd[846]: 2026-10-11T08:12:07+0000 [-] added change with revision 5ce7cf3dca665683909ef44694ee554e4238e15f to database1255buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1256buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1257buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1258buildbot # Dload Upload Total Spent Left Speed1259buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2036 0 0100 51 100 51 0 0 1707 0 0100 51 100 51 0 0 1483 0 01260buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1261buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1262buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1263buildbot # Dload Upload Total Spent Left Speed1264buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2049 0 0100 51 100 51 0 0 1719 0 0100 51 100 51 0 0 1492 0 01265buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1266buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1267buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1268buildbot # Dload Upload Total Spent Left Speed1269buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1780 0 0100 51 100 51 0 0 1508 0 0100 51 100 51 0 0 1328 0 01270buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1271buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1272buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1273buildbot # Dload Upload Total Spent Left Speed1274buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2164 0 0100 51 100 51 0 0 1810 0 0100 51 100 51 0 0 1557 0 01275buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds)1276buildbot # [ 44.138905] twistd[846]: 2026-10-11T08:12:12+0000 [-] added buildset 1 to database1277buildbot # [ 44.283525] twistd[846]: 2026-10-11T08:12:12+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1278buildbot # [ 44.289653] twistd[846]: 2026-10-11T08:12:12+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1279buildbot # [ 44.358471] twistd[846]: 2026-10-11T08:12:12+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1280buildbot # [ 44.362583] twistd[846]: 2026-10-11T08:12:12+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1281buildbot # [ 44.364871] twistd[846]: 2026-10-11T08:12:12+0000 [-] sending ping1282buildbot # [ 44.366479] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] message from master: ping1283buildbot # [ 44.368104] twistd[846]: 2026-10-11T08:12:12+0000 [Broker,0,127.0.0.1] ping finished: success1284buildbot # [ 44.388968] twistd[846]: 2026-10-11T08:12:12+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1285buildbot # [ 44.390363] twistd[846]: 2026-10-11T08:12:12+0000 [-] command '['git', '--version']' in dir 'build'1286buildbot # [ 44.392057] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 0): startCommand:shell1287buildbot # [ 44.395055] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1288buildbot # [ 44.396411] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '--version']): git --version1289buildbot # [ 44.397937] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1290buildbot # [ 44.400027] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1291buildbot # [ 44.401470] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1292buildbot # [ 44.402986] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '--version']): using PTY: False1293buildbot # [ 44.421075] twistd[847]: 2026-10-11T08:12:12+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0160201294buildbot # [ 44.422699] twistd[847]: 2026-10-11T08:12:12+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9baaba0>1295buildbot # [ 44.452025] twistd[846]: 2026-10-11T08:12:12+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01296buildbot # [ 44.488072] twistd[846]: 2026-10-11T08:12:12+0000 [-] <RemoteCommand 'stat' at 124470036956560>: RemoteCommand.run [1]1297buildbot # [ 44.495058] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 1): startCommand:stat1298buildbot # [ 44.496198] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1299buildbot # [ 44.499040] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x76aea9ba9400>1300buildbot # [ 44.501517] twistd[846]: 2026-10-11T08:12:12+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 124470036956560> rc=21301buildbot # [ 44.513116] twistd[846]: 2026-10-11T08:12:12+0000 [-] <RemoteCommand 'mkdir' at 124470036445328>: RemoteCommand.run [2]1302buildbot # [ 44.545086] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 2): startCommand:mkdir1303buildbot # [ 44.546328] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x76aea9ba9160>1304buildbot # [ 44.548887] twistd[846]: 2026-10-11T08:12:12+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 124470036445328> rc=01305buildbot # [ 44.556288] twistd[846]: 2026-10-11T08:12:12+0000 [-] <RemoteCommand 'downloadFile' at 124470036445968>: RemoteCommand.run [3]1306buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1307buildbot # [ 44.593148] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 3): startCommand:downloadFile1308buildbot # [ 44.601345] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x76aea9ba81a0>1309buildbot # [ 44.606716] twistd[846]: 2026-10-11T08:12:12+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 124470036445968> rc=01310buildbot # [ 44.622516] twistd[846]: 2026-10-11T08:12:12+0000 [-] <RemoteCommand 'listdir' at 124470036446288>: RemoteCommand.run [4]1311buildbot # [ 44.656082] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 4): startCommand:listdir1312buildbot # [ 44.657285] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x76aea9ba92b0>1313buildbot # [ 44.660056] twistd[846]: 2026-10-11T08:12:12+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 124470036446288> rc=01314buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1315buildbot # [ 44.680316] twistd[846]: 2026-10-11T08:12:12+0000 [-] No git repo present, making full clone1316buildbot # [ 44.681387] twistd[846]: 2026-10-11T08:12:12+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1317buildbot # [ 44.684546] twistd[846]: 2026-10-11T08:12:12+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1318buildbot # Dload Upload Total Spent Left Speed1319buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14353 0 0100 401 100 401 0 0 12322 0 [ 44.707082] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command 5): startCommand:shell1320buildbot # [ 44.708216] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1321buildbot # [ 44.713798] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1322buildbot # 0100 401 100 401 0 0 8018 0 01323buildbot # [ 44.737656] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1324buildbot # [ 44.742114] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1325buildbot # [ 44.745383] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1326buildbot # [ 44.750799] twistd[847]: 2026-10-11T08:12:12+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1327buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds)1328buildbot # [ 44.968820] sshd-session[1077]: Accepted publickey for root from ::1 port 54594 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81329buildbot # [ 44.990320] sshd-session[1077]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1330buildbot # [ 45.004311] systemd-logind[432]: New session '6' of user 'root' with class 'user' and type 'tty'.1331buildbot # [ 45.007585] systemd[1]: Started Session 6 of User root.1332buildbot # [ 45.068416] sshd-session[1080]: Received disconnect from ::1 port 54594:11: disconnected by user1333buildbot # [ 45.069766] sshd-session[1080]: Disconnected from user root ::1 port 545941334buildbot # [ 45.071236] sshd-session[1077]: pam_unix(sshd:session): session closed for user root1335buildbot # [ 45.077576] systemd[1]: session-6.scope: Deactivated successfully.1336buildbot # [ 45.080441] systemd-logind[432]: Session 6 logged out. Waiting for processes to exit.1337buildbot # [ 45.084075] systemd-logind[432]: Removed session 6.1338buildbot # [ 45.101094] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3871671339buildbot # [ 45.104675] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9bc1090>1340buildbot # [ 45.107395] twistd[846]: 2026-10-11T08:12:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01341buildbot # [ 45.131905] twistd[846]: 2026-10-11T08:12:13+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']'>: RemoteCommand.run [6]1342buildbot # [ 45.135328] twistd[846]: 2026-10-11T08:12:13+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']' in dir 'build'1343buildbot # [ 45.152902] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command 6): startCommand:shell1344buildbot # [ 45.154368] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): RunProcess._startCommand1345buildbot # [ 45.157515] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f 5ce7cf3dca665683909ef44694ee554e4238e15f1346buildbot # [ 45.162134] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1347buildbot # [ 45.165828] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): watching logfiles {}1348buildbot # [ 45.169119] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'5ce7cf3dca665683909ef44694ee554e4238e15f']1349buildbot # [ 45.175094] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): using PTY: False1350buildbot # [ 45.199872] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']): command finished with signal None, exit code 0, elapsedTime: 0.0257291351buildbot # [ 45.203438] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9bc1450>1352buildbot # [ 45.225699] twistd[846]: 2026-10-11T08:12:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', '5ce7cf3dca665683909ef44694ee554e4238e15f']'> rc=01353buildbot # [ 45.247715] twistd[846]: 2026-10-11T08:12:13+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1354buildbot # [ 45.250587] twistd[846]: 2026-10-11T08:12:13+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1355buildbot # [ 45.265938] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command 7): startCommand:shell1356buildbot # [ 45.267412] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1357buildbot # [ 45.270476] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1358buildbot # [ 45.276133] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1359buildbot # [ 45.279551] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1360buildbot # [ 45.282364] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1361buildbot # [ 45.286694] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1362buildbot # [ 45.432443] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1566661363buildbot # [ 45.435948] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9b66520>1364buildbot # [ 45.439813] twistd[846]: 2026-10-11T08:12:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01365buildbot # [ 45.458071] twistd[846]: 2026-10-11T08:12:13+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1366buildbot # [ 45.459451] twistd[846]: 2026-10-11T08:12:13+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1367buildbot # [ 45.485141] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command 8): startCommand:shell1368buildbot # [ 45.488781] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1369buildbot # [ 45.490171] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1370buildbot # [ 45.491476] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1371buildbot # [ 45.493477] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1372buildbot # [ 45.494855] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1373buildbot # [ 45.496374] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1374buildbot # [ 45.510176] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0229381375buildbot # [ 45.512165] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9b66650>1376buildbot # [ 45.542675] twistd[846]: 2026-10-11T08:12:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01377buildbot # [ 45.564138] twistd[846]: 2026-10-11T08:12:13+0000 [-] Got Git revision 5ce7cf3dca665683909ef44694ee554e4238e15f1378buildbot # [ 45.565682] twistd[846]: 2026-10-11T08:12:13+0000 [-] <RemoteCommand 'rmdir' at 124470036446608>: RemoteCommand.run [9]1379buildbot # [ 45.586069] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command 9): startCommand:rmdir1380buildbot # [ 45.587197] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1381buildbot # [ 45.589184] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1382buildbot # [ 45.591745] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1383buildbot # [ 45.596109] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1384buildbot # [ 45.598078] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1385buildbot # [ 45.600665] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1386buildbot # [ 45.618568] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0239171387buildbot # [ 45.621156] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x76aea9bab0e0>1388buildbot # [ 45.647029] twistd[846]: 2026-10-11T08:12:13+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 124470036446608> rc=01389buildbot # [ 45.667416] twistd[846]: 2026-10-11T08:12:13+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1390buildbot # [ 45.686984] twistd[846]: 2026-10-11T08:12:13+0000 [-] step 'git' complete: success (None)1391buildbot # [ 45.694597] twistd[846]: 2026-10-11T08:12:13+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7134722d92b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7134722da660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7134722da660>)])1392buildbot # [ 45.709030] twistd[846]: 2026-10-11T08:12:13+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1393buildbot # [ 45.711751] twistd[846]: 2026-10-11T08:12:13+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1394buildbot # [ 45.714517] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command 10): startCommand:shell1395buildbot # [ 45.716230] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1396buildbot # [ 45.718284] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1397buildbot # [ 45.720629] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1398buildbot # [ 45.723220] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1399buildbot # [ 45.727051] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1400buildbot # [ 45.729380] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1401buildbot # [ 45.754344] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0286911402buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1403buildbot # [ 45.756792] twistd[847]: 2026-10-11T08:12:13+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aeaa18be30>1404buildbot # [ 45.775692] twistd[846]: 2026-10-11T08:12:13+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01405buildbot # [ 45.782779] twistd[846]: 2026-10-11T08:12:13+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1406buildbot # [ 45.786918] twistd[846]: 2026-10-11T08:12:13+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1407buildbot # [ 45.823052] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command 11): startCommand:shell1408buildbot # [ 45.825052] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1409buildbot # [ 45.829063] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1410buildbot # [ 45.835130] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1411buildbot # [ 45.839594] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1412buildbot # [ 45.844657] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1413buildbot # [ 45.853406] twistd[847]: 2026-10-11T08:12:13+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1414buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1415buildbot # Dload Upload Total Spent Left Speed1416buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15885 0 0100 401 100 401 0 0 12596 0 0100 401 100 401 0 0 10547 0 01417buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1418buildbot # [ 46.020111] systemd[1]: Started Nix Daemon.1419buildbot # [ 46.144371] nix-daemon[1125]: accepted connection from pid 1124, user buildbot-worker1420buildbot # [ 46.179117] twistd[847]: 2026-10-11T08:12:14+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.3264391421buildbot # [ 46.183411] twistd[847]: 2026-10-11T08:12:14+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9bc8af0>1422buildbot # [ 46.187587] twistd[846]: 2026-10-11T08:12:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01423buildbot # [ 46.214885] twistd[846]: 2026-10-11T08:12:14+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x7134722d92b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x7134722da660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x7134722da660>)]1424buildbot # [ 46.227597] twistd[846]: 2026-10-11T08:12:14+0000 [-] step 'Evaluate flake' complete: success (None)1425buildbot # [ 46.250193] twistd[846]: 2026-10-11T08:12:14+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1426buildbot # [ 46.259537] twistd[846]: 2026-10-11T08:12:14+0000 [-] step 'build flake' complete: success (None)1427buildbot # [ 46.271594] twistd[846]: 2026-10-11T08:12:14+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x713472130ae0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x713472130b80>)): []1428buildbot # [ 46.279657] twistd[846]: 2026-10-11T08:12:14+0000 [-] step 'Process skipped builds' complete: skipped (None)1429buildbot # [ 46.290793] twistd[846]: 2026-10-11T08:12:14+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1430buildbot # [ 46.293684] twistd[846]: 2026-10-11T08:12:14+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1431buildbot # [ 46.296556] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command 12): startCommand:shell1432buildbot # [ 46.297960] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1433buildbot # [ 46.300110] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1434buildbot # [ 46.302767] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1435buildbot # [ 46.306084] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1436buildbot # [ 46.309976] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1437buildbot # [ 46.312863] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1438buildbot # [ 46.327438] twistd[847]: 2026-10-11T08:12:14+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0190001439buildbot # [ 46.329933] twistd[847]: 2026-10-11T08:12:14+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9bc8f30>1440buildbot # [ 46.359497] twistd[846]: 2026-10-11T08:12:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01441buildbot # [ 46.383069] twistd[846]: 2026-10-11T08:12:14+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1442buildbot # [ 46.390509] twistd[846]: 2026-10-11T08:12:14+0000 [-] step 'Cleanup drv paths' complete: success (None)1443buildbot # [ 46.401606] twistd[846]: 2026-10-11T08:12:14+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1444buildbot # [ 46.404518] twistd[846]: 2026-10-11T08:12:14+0000 [-] command '['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1445buildbot # [ 46.407992] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command 13): startCommand:shell1446buildbot # [ 46.409418] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1447buildbot # [ 46.411936] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev 5ce7cf3dca665683909ef44694ee554e4238e15f --branch master --repo test-flake1448buildbot # [ 46.415165] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1449buildbot # [ 46.418340] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1450buildbot # [ 46.423073] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'5ce7cf3dca665683909ef44694ee554e4238e15f', b'--branch', b'master', b'--repo', b'test-flake']1451buildbot # [ 46.426427] twistd[847]: 2026-10-11T08:12:14+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1452buildbot # [ 46.790291] nix-daemon[1125]: accepted connection from pid 1134, user buildbot-worker1453buildbot # [ 46.822478] twistd[847]: 2026-10-11T08:12:14+0000 [-] (command ['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4000261454buildbot # [ 46.825362] twistd[847]: 2026-10-11T08:12:14+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9bd8550>1455buildbot # [ 46.829479] twistd[846]: 2026-10-11T08:12:14+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']'> rc=01456buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1457buildbot # [ 46.937803] twistd[846]: 2026-10-11T08:12:15+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x713472131300>, logEnviron=False)): []1458buildbot # [ 46.948565] twistd[846]: 2026-10-11T08:12:15+0000 [-] step 'Evaluate effects' complete: success (None)1459buildbot # [ 46.962950] twistd[846]: 2026-10-11T08:12:15+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1460buildbot # [ 46.970116] twistd[846]: 2026-10-11T08:12:15+0000 [-] step 'Buildbot effect' complete: success (None)1461buildbot # [ 46.987250] twistd[846]: 2026-10-11T08:12:15+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1462buildbot # [ 46.989564] twistd[846]: 2026-10-11T08:12:15+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1463buildbot # [ 46.991747] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command 14): startCommand:shell1464buildbot # [ 46.992825] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1465buildbot # [ 46.995118] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev 5ce7cf3dca665683909ef44694ee554e4238e15f --branch master --repo test-flake1466buildbot # [ 46.998182] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1467buildbot # [ 47.001232] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1468buildbot # [ 47.004393] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'5ce7cf3dca665683909ef44694ee554e4238e15f', b'--branch', b'master', b'--repo', b'test-flake']1469buildbot # [ 47.008446] twistd[847]: 2026-10-11T08:12:15+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1470buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1471buildbot # Dload Upload Total Spent Left Speed1472buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 15175 0 0100 401 100 401 0 0 11985 0 0100 401 100 401 0 0 10017 0 01473buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1474buildbot # [ 47.375467] nix-daemon[1125]: accepted connection from pid 1146, user buildbot-worker1475buildbot # [ 47.406744] twistd[847]: 2026-10-11T08:12:15+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4193221476buildbot # [ 47.409681] twistd[847]: 2026-10-11T08:12:15+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x76aea9bd8850>1477buildbot # [ 47.415056] twistd[846]: 2026-10-11T08:12:15+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', '5ce7cf3dca665683909ef44694ee554e4238e15f', '--branch', 'master', '--repo', 'test-flake']'> rc=01478buildbot # [ 47.451256] twistd[846]: 2026-10-11T08:12:15+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x7134722d8d70>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x7134721314e0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x713472131580>, logEnviron=False)): []1479buildbot # [ 47.463359] twistd[846]: 2026-10-11T08:12:15+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1480buildbot # [ 47.464635] twistd[846]: 2026-10-11T08:12:15+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1481buildbot # [ 47.474783] twistd[846]: 2026-10-11T08:12:15+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1482buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1483buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1484buildbot # Dload Upload Total Spent Left Speed1485buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 14862 0 0100 411 100 411 0 0 12682 0 0100 411 100 411 0 0 11142 0 01486buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1487(finished: subtest: Wait for nix-eval build to complete, in 18.11 seconds)1488subtest: Schedule cache is created1489buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1490buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1491buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1492buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1493(finished: subtest: Schedule cache is created, in 0.05 seconds)1494subtest: Nightly schedulers are created1495buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1496buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1497buildbot # Dload Upload Total Spent Left Speed1498buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 54701 0 0100 3793 100 3793 0 0 49189 0 0100 3793 100 3793 0 0 45174 0 01499buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds)1500buildbot # [ 48.519233] sshd-session[1181]: Accepted publickey for root from ::1 port 54600 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81501buildbot # [ 48.538706] sshd-session[1181]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1502buildbot # [ 48.550546] systemd-logind[432]: New session '7' of user 'root' with class 'user' and type 'tty'.1503buildbot # [ 48.554568] systemd[1]: Started Session 7 of User root.1504buildbot # [ 48.595781] sshd-session[1184]: Received disconnect from ::1 port 54600:11: disconnected by user1505buildbot # [ 48.597119] sshd-session[1184]: Disconnected from user root ::1 port 546001506buildbot # [ 48.598266] sshd-session[1181]: pam_unix(sshd:session): session closed for user root1507buildbot # [ 48.609346] systemd[1]: session-7.scope: Deactivated successfully.1508buildbot # [ 48.613818] systemd-logind[432]: Session 7 logged out. Waiting for processes to exit.1509buildbot # [ 48.615081] systemd-logind[432]: Removed session 7.1510buildbot # [ 48.815876] sshd-session[1189]: Accepted publickey for root from ::1 port 54610 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81511buildbot # [ 48.835898] sshd-session[1189]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1512buildbot # [ 48.845734] systemd-logind[432]: New session '8' of user 'root' with class 'user' and type 'tty'.1513buildbot # [ 48.848235] systemd[1]: Started Session 8 of User root.1514buildbot # [ 48.897185] sshd-session[1192]: Received disconnect from ::1 port 54610:11: disconnected by user1515buildbot # [ 48.898470] sshd-session[1192]: Disconnected from user root ::1 port 546101516buildbot # [ 48.899628] sshd-session[1189]: pam_unix(sshd:session): session closed for user root1517buildbot # [ 48.906150] systemd[1]: session-8.scope: Deactivated successfully.1518buildbot # [ 48.909916] systemd-logind[432]: Session 8 logged out. Waiting for processes to exit.1519buildbot # [ 48.913163] systemd-logind[432]: Removed session 8.1520buildbot # [ 48.920297] twistd[846]: 2026-10-11T08:12:17+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1521buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1522buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1523buildbot # Dload Upload Total Spent Left Speed1524buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 52533 0 0100 3793 100 3793 0 0 49277 0 0100 3793 100 3793 0 0 46539 0 01525buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1526buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1527buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1528buildbot # Dload Upload Total Spent Left Speed1529buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 53656 0 0100 3793 100 3793 0 0 49954 0 0100 3793 100 3793 0 0 47136 0 01530buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1531buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1532buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1533buildbot # Dload Upload Total Spent Left Speed1534buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 51839 0 0100 3793 100 3793 0 0 48654 0 0100 3793 100 3793 0 0 45977 0 01535buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1536buildbot # [ 52.448373] twistd[846]: 2026-10-11T08:12:20+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1537buildbot # [ 52.453704] twistd[846]: 2026-10-11T08:12:20+0000 [-] beginning configuration update1538buildbot # [ 52.457759] twistd[846]: 2026-10-11T08:12:20+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1539buildbot # [ 52.497204] twistd[846]: 2026-10-11T08:12:20+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1540buildbot # [ 52.502236] twistd[846]: 2026-10-11T08:12:20+0000 [-] adding 1 new schedulers, removing 01541buildbot # [ 52.611836] twistd[846]: 2026-10-11T08:12:20+0000 [-] configuration update complete (took 0.159 seconds)1542buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1543buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1544buildbot # Dload Upload Total Spent Left Speed1545buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 50646 0 0100 4079 100 4079 0 0 47844 0 0100 4079 100 4079 0 0 45411 0 01546buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds)1547buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1548buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1549buildbot # Dload Upload Total Spent Left Speed1550buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 57038 0 0100 4079 100 4079 0 0 53091 0 0100 4079 100 4079 0 0 50129 0 01551buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.14 seconds)1552(finished: subtest: Nightly schedulers are created, in 4.93 seconds)1553subtest: Scheduled effect builder exists1554buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1555buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1556buildbot # Dload Upload Total Spent Left Speed1557buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 115.0k 0 0100 2371 100 2371 0 0 95274 0 0100 2371 100 2371 0 0 80778 0 01558buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.09 seconds)1559(finished: subtest: Scheduled effect builder exists, in 0.09 seconds)1560(finished: run the VM test script, in 54.20 seconds)1561test script finished in 54.25s1562cleanup1563kill QemuMachine (pid 12)1564buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13)1565(finished: cleanup, in 0.26 seconds)1566additionally exposed symbols:1567 buildbot,1568 vlan1,1569 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh