tribuchet: building on eliza Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.00 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot: QEMU running (pid 12) buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot # Formatting '/build/vm-state-buildbot/tmp.r8ohlbGNw6', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 107e05fa-159f-4cb0-85bb-b9b26688d1d6 buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40] buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] KASLR enabled buildbot # [ 0.000000] random: crng init done buildbot # [ 0.000000] Machine model: linux,dummy-virt buildbot # [ 0.000000] efi: UEFI not found. buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf] buildbot # [ 0.000000] Zone ranges: buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] DMA32 empty buildbot # [ 0.000000] Normal empty buildbot # [ 0.000000] Device empty buildbot # [ 0.000000] Movable zone start for each node buildbot # [ 0.000000] Early memory node ranges buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc00000 buildbot # [ 0.000000] psci: probing for conduit method from DT. buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware. buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs buildbot # [ 0.000000] psci: Trusted OS migration not required buildbot # [ 0.000000] psci: SMC Calling Convention v1.1 buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u311296 buildbot # [ 0.000000] Detected PIPT I-cache on CPU0 buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm) buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface buildbot # [ 0.000000] CPU features: detected: Spectre-v4 buildbot # [ 0.000000] CPU features: detected: Spectre-BHB buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_38 buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_23 buildbot # [ 0.000000] alternatives: applying boot alternatives buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/6p1ag8glxmivwrdq44b2z82l8szi03zf-nixos-system-buildbot-test/init regInfo=/nix/store/j5ydm6jvkm328d3pidbsqbrq6n2iszxp-closure-info/registration console=ttyAMA0,115200n8 console=tty0 buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/j5ydm6jvkm328d3pidbsqbrq6n2iszxp-closure-info/registration", will be passed to user space. buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB buildbot # [ 0.000000] software IO TLB: area num 1. buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB) buildbot # [ 0.000000] Fallback order for Node 0: 0 buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 buildbot # [ 0.000000] Policy zone: DMA buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.000000] allocated 2097152 bytes of page_ext buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups buildbot # [ 0.000000] rcu: Hierarchical RCU implementation. buildbot # [ 0.000000] rcu: RCU event tracing is enabled. buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.000000] Rude variant of Tasks RCU enabled. buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled. buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 buildbot # [ 0.000000] GICv3: 256 SPIs implemented buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=0 buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff] buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1) buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d00000 buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d10000 buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt). buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns buildbot # [ 0.000030] arm-pv: using stolen time PV buildbot # [ 0.000389] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.000553] Console: colour dummy device 80x25 buildbot # [ 0.000561] printk: legacy console [tty0] enabled buildbot # [ 0.000733] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000) buildbot # [ 0.000740] pid_max: default: 32768 minimum: 301 buildbot # [ 0.000809] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.000951] landlock: Up and running. buildbot # [ 0.000954] Yama: becoming mindful. buildbot # [ 0.001373] LSM support for eBPF active buildbot # [ 0.001497] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.001517] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.002608] cacheinfo: Unable to detect cache hierarchy for CPU 0 buildbot # [ 0.003337] rcu: Hierarchical SRCU implementation. buildbot # [ 0.003341] rcu: Max phase no-delay instances is 1000. buildbot # [ 0.004632] fsl-mc MSI: its@8080000 domain created buildbot # [ 0.004722] EFI services will not be available. buildbot # [ 0.004799] smp: Bringing up secondary CPUs ... buildbot # [ 0.004807] smp: Brought up 1 node, 1 CPU buildbot # [ 0.004810] SMP: Total of 1 processors activated. buildbot # [ 0.004813] CPU: All CPU(s) started at EL1 buildbot # [ 0.004824] CPU features: detected: Branch Target Identification buildbot # [ 0.004829] CPU features: detected: ARMv8.4 Translation Table Level buildbot # [ 0.004835] CPU features: detected: Instruction cache invalidation not required for I/D coherence buildbot # [ 0.004838] CPU features: detected: Data cache clean to the PoU not required for I/D coherence buildbot # [ 0.004842] CPU features: detected: Common not Private translations buildbot # [ 0.004845] CPU features: detected: CRC32 instructions buildbot # [ 0.004847] CPU features: detected: Data cache clean to Point of Deep Persistence buildbot # [ 0.004851] CPU features: detected: Data cache clean to Point of Persistence buildbot # [ 0.004854] CPU features: detected: Data independent timing control (DIT) buildbot # [ 0.004857] CPU features: detected: E0PD buildbot # [ 0.004860] CPU features: detected: Enhanced Counter Virtualization buildbot # [ 0.004863] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF) buildbot # [ 0.004866] CPU features: detected: Enhanced Virtualization Traps buildbot # [ 0.004870] CPU features: detected: Fine Grained Traps buildbot # [ 0.004873] CPU features: detected: Generic authentication (architected QARMA5 algorithm) buildbot # [ 0.004878] CPU features: detected: RCpc load-acquire (LDAPR) buildbot # [ 0.004881] CPU features: detected: LSE atomic instructions buildbot # [ 0.004884] CPU features: detected: Privileged Access Never buildbot # [ 0.004887] CPU features: detected: PMUv3 buildbot # [ 0.004889] CPU features: detected: RAS Extension Support buildbot # [ 0.004892] CPU features: detected: RASv1p1 Extension Support buildbot # [ 0.004895] CPU features: detected: Random Number Generator buildbot # [ 0.004897] CPU features: detected: Speculation barrier (SB) buildbot # [ 0.004900] CPU features: detected: Stage-2 Force Write-Back buildbot # [ 0.004903] CPU features: detected: TLB range maintenance instructions buildbot # [ 0.004908] CPU features: detected: Speculative Store Bypassing Safe (SSBS) buildbot # [ 0.004944] alternatives: applying system-wide alternatives buildbot # [ 0.007922] CPU features: detected: BBM Level 2 without TLB conflict abort buildbot # [ 0.008155] Memory: 895064K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved) buildbot # [ 0.008483] devtmpfs: initialized buildbot # [ 0.010108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns buildbot # [ 0.010131] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.010152] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.010328] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL buildbot # [ 0.010332] 0 pages in range for non-PLT usage buildbot # [ 0.010333] 508320 pages in range for PLT usage buildbot # [ 0.010445] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.011212] DMI not present or invalid. buildbot # [ 0.014317] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.016650] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.016789] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.016951] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.016972] audit: initializing netlink subsys (disabled) buildbot # [ 0.017512] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.017514] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.017517] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.017520] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.017523] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.017549] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.017557] cpuidle: using governor ladder buildbot # [ 0.017563] cpuidle: using governor menu buildbot # [ 0.017757] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers. buildbot # [ 0.017772] ASID allocator initialised with 65536 entries buildbot # [ 0.018865] Serial: AMBA PL011 UART driver buildbot # [ 0.024169] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 buildbot # [ 0.024327] printk: console [ttyAMA0] enabled buildbot # [ 0.152138] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.152156] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.152162] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages buildbot # [ 0.152166] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page buildbot # [ 0.152171] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.152175] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.152179] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages buildbot # [ 0.152183] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page buildbot # [ 0.159950] fbcon: Taking over console buildbot # [ 0.159963] ACPI: Interpreter disabled. buildbot # [ 0.161773] iommu: Default domain type: Translated buildbot # [ 0.161783] iommu: DMA domain TLB invalidation policy: strict mode buildbot # [ 0.163525] SCSI subsystem initialized buildbot # [ 0.170908] usbcore: registered new interface driver usbfs buildbot # [ 0.170943] usbcore: registered new interface driver hub buildbot # [ 0.170961] usbcore: registered new device driver usb buildbot # [ 0.171240] pps_core: LinuxPPS API ver. 1 registered buildbot # [ 0.171246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti buildbot # [ 0.171268] PTP clock support registered buildbot # [ 0.171317] EDAC MC: Ver: 3.0.0 buildbot # [ 0.176184] scmi_core: SCMI protocol bus registered buildbot # [ 0.177176] FPGA manager framework buildbot # [ 0.178141] vgaarb: loaded buildbot # [ 0.178792] clocksource: Switched to clocksource arch_sys_counter buildbot # [ 0.179248] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.179279] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.181753] netfs: FS-Cache loaded buildbot # [ 0.181863] pnp: PnP ACPI: disabled buildbot # [ 0.188007] NET: Registered PF_INET protocol family buildbot # [ 0.188161] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.217885] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.217924] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.217956] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.217998] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.218073] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.218151] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.218203] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.218249] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.218328] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.218360] NET: Registered PF_XDP protocol family buildbot # [ 0.218377] PCI: CLS 0 bytes, default 64 buildbot # [ 0.218600] Trying to unpack rootfs image as initramfs... buildbot # [ 0.236707] kvm [1]: HYP mode not available buildbot # [ 0.323850] Initialise system trusted keyrings buildbot # [ 0.330857] workingset: timestamp_bits=42 max_order=18 bucket_order=0 buildbot # [ 0.332190] squashfs: version 4.0 (2009/01/31) Phillip Lougher buildbot # [ 0.332983] 9p: Installing v9fs 9p2000 file system support buildbot # [ 0.353648] Key type asymmetric registered buildbot # [ 0.353661] Asymmetric key parser 'x509' registered buildbot # [ 0.353713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) buildbot # [ 0.358834] io scheduler mq-deadline registered buildbot # [ 0.358846] io scheduler kyber registered buildbot # [ 0.366950] pl061_gpio 9030000.pl061: PL061 GPIO chip registered buildbot # [ 0.368347] ledtrig-cpu: registered to indicate activity on CPUs buildbot # [ 0.368720] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: buildbot # [ 0.368736] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 buildbot # [ 0.368754] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 buildbot # [ 0.368763] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 buildbot # [ 0.368782] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits buildbot # [ 0.368805] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] buildbot # [ 0.368886] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 buildbot # [ 0.368895] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.368901] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] buildbot # [ 0.368906] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] buildbot # [ 0.368911] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] buildbot # [ 0.368968] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.369412] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.369634] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.369652] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.369682] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.369698] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.370168] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.370357] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.370373] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.370403] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.398933] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.399135] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.399154] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.399184] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.399759] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.399954] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.399971] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.400001] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.400476] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.400665] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.400681] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.400712] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.401171] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.401359] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f] buildbot # [ 0.401375] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.401405] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.401867] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.402055] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.402072] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.402102] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.402119] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref] buildbot # [ 0.402595] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint buildbot # [ 0.402806] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.402835] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.403315] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.403507] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.403537] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.403950] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint buildbot # [ 0.404138] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff] buildbot # [ 0.404386] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.404684] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f] buildbot # [ 0.404703] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.404733] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.405213] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.405404] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f] buildbot # [ 0.405421] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff] buildbot # [ 0.405452] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] buildbot # [ 0.406042] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned buildbot # [ 0.406054] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned buildbot # [ 0.406060] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned buildbot # [ 0.406105] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned buildbot # [ 0.406154] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned buildbot # [ 0.406202] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned buildbot # [ 0.406249] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned buildbot # [ 0.406297] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned buildbot # [ 0.406346] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned buildbot # [ 0.406394] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned buildbot # [ 0.406442] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned buildbot # [ 0.406491] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned buildbot # [ 0.406557] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned buildbot # [ 0.406604] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned buildbot # [ 0.406628] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned buildbot # [ 0.406650] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned buildbot # [ 0.406673] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned buildbot # [ 0.406696] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned buildbot # [ 0.406719] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned buildbot # [ 0.406744] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned buildbot # [ 0.406767] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned buildbot # [ 0.406790] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned buildbot # [ 0.462867] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned buildbot # [ 0.462900] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned buildbot # [ 0.462925] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned buildbot # [ 0.462949] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned buildbot # [ 0.462973] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned buildbot # [ 0.462996] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned buildbot # [ 0.463019] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned buildbot # [ 0.463043] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned buildbot # [ 0.463067] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned buildbot # [ 0.463090] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned buildbot # [ 0.463115] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned buildbot # [ 0.463139] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned buildbot # [ 0.463171] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] buildbot # [ 0.463182] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff] buildbot # [ 0.463187] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff] buildbot # [ 0.464436] pci 0000:00:0a.0: enabling device (0000 -> 0002) buildbot # [ 0.504742] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) buildbot # [ 0.506910] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) buildbot # [ 0.508923] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) buildbot # [ 0.518983] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) buildbot # [ 0.520959] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) buildbot # [ 0.522903] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003) buildbot # [ 0.524946] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003) buildbot # [ 0.534974] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002) buildbot # [ 0.537480] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002) buildbot # [ 0.547346] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003) buildbot # [ 0.549768] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003) buildbot # [ 0.562667] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.565203] msm_serial: driver initialized buildbot # [ 0.565365] SuperH (H)SCI(F) driver initialized buildbot # [ 0.565418] STM32 USART driver initialized buildbot # [ 0.607360] loop: module loaded buildbot # [ 0.607544] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 0.608398] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 0.615374] megasas: 07.734.00.00-rc1 buildbot # [ 0.616161] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] buildbot # [ 0.617943] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.617972] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.619617] Using buffer write method buildbot # [ 0.619696] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] buildbot # [ 0.621311] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 buildbot # [ 0.621339] Intel/Sharp Extended Query Table at 0x0031 buildbot # [ 0.630588] Using buffer write method buildbot # [ 0.630620] Concatenating MTD devices: buildbot # [ 0.630624] (0): "0.flash" buildbot # [ 0.630628] (1): "0.flash" buildbot # [ 0.630632] into device "0.flash" buildbot # [ 0.853804] Freeing initrd memory: 25516K buildbot # [ 0.859872] tun: Universal TUN/TAP device driver, 1.6 buildbot # [ 0.863687] thunder_xcv, ver 1.0 buildbot # [ 0.863727] thunder_bgx, ver 1.0 buildbot # [ 0.863749] nicpf, ver 1.0 buildbot # [ 0.864272] e1000: Intel(R) PRO/1000 Network Driver buildbot # [ 0.864279] e1000: Copyright (c) 1999-2006 Intel Corporation. buildbot # [ 0.864308] e1000e: Intel(R) PRO/1000 Network Driver buildbot # [ 0.864315] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. buildbot # [ 0.864346] igb: Intel(R) Gigabit Ethernet Network Driver buildbot # [ 0.864351] igb: Copyright (c) 2007-2014 Intel Corporation. buildbot # [ 0.864373] igbvf: Intel(R) Gigabit Virtual Function Network Driver buildbot # [ 0.864379] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. buildbot # [ 0.864506] sky2: driver version 1.30 buildbot # [ 0.866021] usbcore: registered new interface driver usb-storage buildbot # [ 0.866070] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.866083] usbserial: USB Serial support registered for generic buildbot # [ 0.866652] hv_vmbus: registering driver hyperv_keyboard buildbot # [ 0.867463] ehci-pci 0000:00:0a.0: EHCI Host Controller buildbot # [ 0.867489] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1 buildbot # [ 0.867726] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000 buildbot # [ 0.881933] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00 buildbot # [ 0.882293] hub 1-0:1.0: USB hub found buildbot # [ 0.882313] hub 1-0:1.0: 6 ports detected buildbot # [ 0.885253] rtc-pl031 9010000.pl031: registered as rtc0 buildbot # [ 0.885282] rtc-pl031 9010000.pl031: setting system clock to 2026-10-18T06:54:13 UTC (1792306453) buildbot # [ 0.885585] i2c_dev: i2c /dev entries driver buildbot # [ 0.890466] sdhci: Secure Digital Host Controller Interface driver buildbot # [ 0.890478] sdhci: Copyright(c) Pierre Ossman buildbot # [ 0.890733] Synopsys Designware Multimedia Card Interface Driver buildbot # [ 0.893177] sdhci-pltfm: SDHCI platform and OF driver helper buildbot # [ 0.894775] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 0.896472] usbcore: registered new interface driver usbhid buildbot # [ 0.896480] usbhid: USB HID core driver buildbot # [ 0.929100] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available buildbot # [ 0.930567] drop_monitor: Initializing network drop monitor service buildbot # [ 0.930700] NET: Registered PF_INET6 protocol family buildbot # [ 0.933813] Segment Routing with IPv6 buildbot # [ 0.933843] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.933870] NET: Registered PF_PACKET protocol family buildbot # [ 0.935584] 9pnet: Installing 9P2000 support buildbot # [ 0.937583] Key type dns_resolver registered buildbot # [ 0.944421] registered taskstats version 1 buildbot # [ 0.944569] Loading compiled-in X.509 certificates buildbot # [ 0.952714] Demotion targets for Node 0: null buildbot # [ 0.952820] Key type .fscrypt registered buildbot # [ 0.952827] Key type fscrypt-provisioning registered buildbot # [ 0.952921] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.952939] ima: Allocated hash algorithm: sha1 buildbot # [ 0.952960] ima: No architecture policies found buildbot # [ 0.957196] input: gpio-keys as /devices/platform/gpio-keys/input/input0 buildbot # [ 0.975858] clk: Disabling unused clocks buildbot # [ 0.975877] PM: genpd: Disabling unused power domains buildbot # [ 0.980285] Freeing unused kernel memory: 4736K buildbot # [ 0.980503] Run /init as init process buildbot # [ 0.997115] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.150837] usb 1-1: new high-speed USB device number 2 using ehci-pci buildbot # [ 1.300426] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1 buildbot # [ 1.331918] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.338189] systemd[1]: Detected virtualization qemu. buildbot # [ 1.339279] systemd[1]: Detected architecture arm64. buildbot # [ 1.340294] systemd[1]: Running in initrd. buildbot # [ 1.341716] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.343277] systemd[1]: Hostname set to . buildbot # [ 1.388815] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0 buildbot # [ 1.433213] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.440726] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.441798] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.443021] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.443991] systemd[1]: Reached target Path Units. buildbot # [ 1.444712] systemd[1]: Reached target Slice Units. buildbot # [ 1.445447] systemd[1]: Reached target Swaps. buildbot # [ 1.446161] systemd[1]: Reached target Timer Units. buildbot # [ 1.447045] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.448199] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.449244] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.450120] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.451238] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.451264] systemd[1]: Reached target Socket Units. buildbot # [ 1.454143] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.462721] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.463946] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 1.470967] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 1.478876] systemd[1]: Starting Journal Service... buildbot # [ 1.500231] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.501031] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.509918] usb 1-2: new high-speed USB device number 3 using ehci-pci buildbot # [ 1.511797] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.521523] systemd-journald[73]: Collecting audit messages is disabled. buildbot # [ 1.522529] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.524375] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.528038] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.528301] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 1.539266] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.566493] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.577458] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.583165] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.587004] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.591467] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0 buildbot # [ 1.591793] [drm] features: -virgl +edid -resource_blob -host_visible buildbot # [ 1.591803] [drm] features: -context_init buildbot # [ 1.592503] [drm] number of scanouts: 1 buildbot # [ 1.592521] [drm] number of cap sets: 0 buildbot # [ 1.607233] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic buildbot # [ 1.607249] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0 buildbot # [ 1.639345] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.639712] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.639740] systemd[1]: Reached target Local File Systems. buildbot # [ 1.643573] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.647195] Console: switching to colour frame buffer device 160x50 buildbot # [ 1.662416] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device buildbot # [ 1.668776] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2 buildbot # [ 1.674081] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0 buildbot # [ 1.691309] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.699121] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.721882] systemd[1]: Started Journal Service. buildbot # [ 1.713784] systemd-modules-load[75]: Inserted module 'dm_mod' buildbot # [ 1.715043] systemd-modules-load[75]: Module 'virtio_balloon' is built in buildbot # [ 1.725491] systemd-modules-load[75]: Module 'virtio_console' is built in buildbot # [ 1.726676] systemd-modules-load[75]: Inserted module 'virtio_gpu' buildbot # [ 1.727658] systemd-modules-load[75]: Module 'virtio_rng' is built in buildbot # [ 1.740861] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.742215] systemd-udevd[80]: Using default interface naming scheme 'v260'. buildbot # [ 1.754728] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.765500] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.781659] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.864078] systemd[1]: Starting Virtual Console Setup... buildbot # [ 1.928768] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 1.931853] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.618335] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 2.619306] systemd[1]: Reached target System Initialization. buildbot # [ 2.624461] systemd[1]: Reached target Basic System. buildbot # [ 2.756401] (udev-worker)[93]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.787502] (udev-worker)[102]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.798110] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.859738] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.862893] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.868705] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.914736] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.923665] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.929661] systemd[1]: Mounting /sysroot... buildbot # [ 2.976348] EXT4-fs (vda): mounted filesystem 107e05fa-159f-4cb0-85bb-b9b26688d1d6 r/w with ordered data mode. Quota mode: none. buildbot # [ 2.963788] systemd[1]: Mounted /sysroot. buildbot # [ 2.966946] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.972631] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.991888] systemd-sysroot-fstab-check[121]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 3.001909] systemd[1]: Reload requested from client PID 121 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 3.004252] systemd[1]: Reloading... buildbot # [ 3.223183] systemd[1]: Reloading finished in 222 ms. buildbot # [ 3.242630] systemd-sysroot-fstab-check[121]: Requesting initrd-fs.target/start/replace... buildbot # [ 3.247393] systemd-sysroot-fstab-check[121]: Requesting swap.target/start/replace... buildbot # [ 3.260322] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 3.262171] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 3.266378] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 3.267939] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 3.286572] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 3.288141] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 3.498272] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 3.510224] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 3.521308] systemd[1]: Mounting /sysroot/run... buildbot # [ 3.538845] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 3.568501] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 3.583257] systemd[1]: Mounted /sysroot/run. buildbot # [ 3.588259] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 3.615276] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.617764] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 3.626177] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 3.630871] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 3.647773] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.649129] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.177005] (udev-worker)[99]: mtd0ro: Failed to find and pin callout binary "/nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/mtd_probe": No such file or directory buildbot # [ 4.183557] (udev-worker)[99]: mtd0ro: /nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory buildbot # [ 4.210969] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.212158] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.216191] systemd[1]: Stopping Virtual Console Setup... buildbot # [ 4.218318] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.232788] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.235164] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.236393] systemd[1]: Starting Virtual Console Setup... buildbot # [ 4.257650] systemd-vconsole-setup[156]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 4.261052] systemd[1]: Finished Virtual Console Setup. buildbot # [ 4.498180] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 4.535884] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 4.538336] systemd[1]: Reached target Initrd File Systems. buildbot # [ 4.541967] systemd[1]: Starting Find NixOS closure... buildbot # [ 4.549353] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 4.586720] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 4.592121] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 4.604123] systemd[1]: Finished Find NixOS closure. buildbot # [ 4.605207] systemd[1]: Reached target Initrd Default Target. buildbot # [ 4.607717] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 4.634941] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 4.636586] systemd[1]: Stopped target Basic System. buildbot # [ 4.640484] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 4.641547] systemd[1]: Stopped target Path Units. buildbot # [ 4.642412] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 4.644907] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 4.647748] systemd[1]: Stopped target Slice Units. buildbot # [ 4.652226] systemd[1]: Stopped target Socket Units. buildbot # [ 4.653177] systemd[1]: Stopped target System Initialization. buildbot # [ 4.654100] systemd[1]: Stopped target Swaps. buildbot # [ 4.654829] systemd[1]: Stopped target Timer Units. buildbot # [ 4.655664] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 4.660243] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 4.661253] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 4.663070] systemd[1]: Stopped Find NixOS closure. buildbot # [ 4.666219] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 4.672946] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 4.674832] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 4.676799] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 4.678209] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 4.681385] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 4.684375] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 4.687530] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 4.696996] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 4.702355] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 4.704638] systemd[1]: Stopped target Local File Systems. buildbot # [ 4.706537] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 4.709172] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 4.711822] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 4.713146] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 4.716601] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 4.719826] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 4.720749] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 4.721696] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 4.722617] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 4.723543] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 4.725353] systemd[1]: systemd-udevd.service: Consumed 1.494s CPU time over 3.079s wall clock time, 23.2M memory peak. buildbot # [ 4.726826] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 4.727850] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 4.728832] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 4.729843] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 4.730671] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 4.731684] systemd[1]: Closed udev Control Socket. buildbot # [ 4.736257] systemd[1]: Starting Cleanup udev Database... buildbot # [ 4.740163] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 4.741457] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 4.742479] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 4.748195] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 4.749293] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 4.750251] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 4.777645] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 4.780545] systemd[1]: Finished Cleanup udev Database. buildbot # [ 4.781414] systemd[1]: Reached target Switch Root. buildbot # [ 4.784122] systemd[1]: Starting NixOS Activation... buildbot # [ 4.916690] initrd-nixos-activation-start[181]: booting system configuration /nix/store/6p1ag8glxmivwrdq44b2z82l8szi03zf-nixos-system-buildbot-test buildbot # [ 4.967809] initrd-nixos-activation-start[181]: running activation script... buildbot # [ 5.288404] initrd-nixos-activation-start[204]: setting up /etc... buildbot # [ 5.482608] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 5.485433] systemd[1]: Finished NixOS Activation. buildbot # [ 5.486545] systemd[1]: Starting Switch Root... buildbot # [ 5.510668] systemd[1]: Switching root. buildbot # [ 5.579815] systemd-journald[73]: Received SIGTERM from PID 1 (systemd). buildbot # [ 6.126308] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 6.133364] systemd[1]: Detected virtualization qemu. buildbot # [ 6.135073] systemd[1]: Detected architecture arm64. buildbot # [ 6.137138] systemd[1]: Detected first boot. buildbot # [ 6.141423] systemd[1]: Initializing machine ID from random generator. buildbot # [ 6.416219] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 6.577099] NET: Registered PF_VSOCK protocol family buildbot # [ 6.583172] Guest personality initialized and is inactive buildbot # [ 6.585133] VMCI host device registered (name=vmci, major=10, minor=261) buildbot # [ 6.585169] Initialized host personality buildbot # [ 6.642064] systemd[1]: Applying preset policy. buildbot # [ 7.021108] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 7.392095] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 7.393375] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 7.396596] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 7.399413] systemd[1]: Created slice Slice /system/getty. buildbot # [ 7.401378] systemd[1]: Created slice User and Session Slice. buildbot # [ 7.402624] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 7.404356] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 7.406416] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 7.407532] systemd[1]: Expecting device /dev/ttyAMA0... buildbot # [ 7.409471] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 7.410604] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 7.411917] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 7.413260] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 7.415249] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 7.416515] systemd[1]: Reached target Path Units. buildbot # [ 7.417725] systemd[1]: Reached target Remote File Systems. buildbot # [ 7.419069] systemd[1]: Reached target Slice Units. buildbot # [ 7.420831] systemd[1]: Reached target Swaps. buildbot # [ 7.424075] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 7.428188] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 7.431339] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 7.434765] systemd[1]: Listening on Factory Reset Management. buildbot # [ 7.439286] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 7.441277] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 7.444843] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 7.446326] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 7.448076] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.449742] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.458167] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 7.459597] systemd[1]: Listening on udev Control Socket. buildbot # [ 7.460846] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 7.465191] systemd[1]: Mounting Huge Pages File System... buildbot # [ 7.468953] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 7.474969] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 7.483260] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 7.494465] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 7.503278] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 7.504557] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 7.510661] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 7.514979] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 7.520319] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.535674] systemd[1]: Starting Load Kernel Module fuse... buildbot # [ 7.538111] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.576664] systemd[1]: Starting Journal Service... buildbot # [ 7.604057] systemd[1]: Starting Load Kernel Modules... buildbot # [ 7.641726] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 7.673783] fuse: init (API version 7.45) buildbot # [ 7.677526] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 7.677873] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.685941] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 7.691040] systemd-journald[275]: Collecting audit messages is enabled. buildbot # [ 7.701263] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 7.686975] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 7.691112] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 7.704357] systemd-modules-load[276]: Module 'atkbd' is built in buildbot # [ 7.706353] systemd-modules-load[276]: Module 'loop' is built in buildbot # [ 7.728821] systemd[1]: Started Journal Service. buildbot # [ 7.717723] systemd[1]: Mounted Huge Pages File System. buildbot # [ 7.721494] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 7.724350] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 7.725404] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 7.729891] systemd-modules-load[276]: Inserted module 'tls' buildbot # [ 7.733946] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 7.741943] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 7.746600] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 7.751126] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.756938] systemd[1]: modprobe@fuse.service: Deactivated successfully. buildbot # [ 7.759994] systemd[1]: Finished Load Kernel Module fuse. buildbot # [ 7.763931] systemd[1]: Finished Load Kernel Modules. buildbot # [ 7.780342] systemd[1]: Mounting FUSE Control File System... buildbot # [ 7.792147] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 7.815034] EXT4-fs (vda): re-mounted 107e05fa-159f-4cb0-85bb-b9b26688d1d6. buildbot # [ 7.809522] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 7.811466] systemd-oomd[278]: No swap; memory pressure usage will be degraded buildbot # [ 7.821701] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 7.838096] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 7.839164] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 7.849892] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 7.851707] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.864131] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 7.865085] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.938129] systemd[1]: Mounted FUSE Control File System. buildbot # [ 7.983937] systemd-journald[275]: Received client request to flush runtime journal. buildbot # [ 8.019962] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 8.024453] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 8.025411] systemd[1]: Reached target First Boot Complete. buildbot # [ 8.028496] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 8.032357] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 8.040329] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 8.114061] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 8.115070] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 8.117117] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 8.196462] systemd-udevd[308]: Using default interface naming scheme 'v260'. buildbot # [ 8.317737] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 8.378432] systemd[1]: Mounting /run/wrappers... buildbot # [ 8.425247] systemd[1]: Mounted /run/wrappers. buildbot # [ 8.426154] systemd[1]: Reached target Local File Systems. buildbot # [ 8.429532] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 8.432060] systemd[1]: Starting register-nix-paths.service... buildbot # [ 8.437235] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 8.440181] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 8.449329] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 8.465606] systemd[1]: Starting Create System Files and Directories... buildbot # [ 8.565220] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 8.576959] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 8.648614] systemd[1]: Finished Create System Files and Directories. buildbot # [ 8.661951] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 8.664636] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 8.775482] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 8.819264] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 8.829611] systemd[1]: Starting Update is Completed... buildbot # [ 8.885752] systemd[1]: Finished Update is Completed. buildbot # [ 9.288433] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 9.293966] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 9.575956] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 9.587531] systemd[1]: Finished register-nix-paths.service. buildbot # [ 9.588820] systemd[1]: Reached target System Initialization. buildbot # [ 9.589750] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 9.594692] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 9.599836] systemd[1]: Reached target Timer Units. buildbot # [ 9.600966] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 9.604151] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 9.607252] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 9.611629] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 9.615117] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 9.620262] systemd[1]: Reached target Socket Units. buildbot # [ 9.622984] systemd[1]: Reached target Basic System. buildbot # [ 9.623782] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 9.628817] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.631007] systemd[1]: Starting Post-Boot Actions... buildbot # [ 9.636574] systemd[1]: Started Reset console on configuration changes. buildbot # [ 9.658854] systemd[1]: Starting resolvconf update... buildbot # [ 9.660831] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 9.694364] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 9.700666] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs buildbot # [ 9.744930] systemd[1]: Finished Post-Boot Actions. buildbot # [ 9.774408] nsncd[395]: Oct 18 06:54:22.404 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.785320] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.790640] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.796111] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.812215] systemd[1]: Starting User Login Management... buildbot # [ 9.848465] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.883562] dbus-broker-launch[400]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.907616] dbus-broker-launch[400]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.913472] dbus-broker-launch[400]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.947709] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.989147] dbus-broker-launch[400]: Ready buildbot # [ 9.993323] systemd-logind[416]: New seat seat0. buildbot # [ 9.997892] systemd[1]: Started User Login Management. buildbot # [ 10.006495] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 10.010578] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 10.013799] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 10.019290] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 10.023607] systemd[1]: Starting linger-users.service... buildbot # [ 10.026727] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 10.030822] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 10.035361] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 10.061888] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 10.108664] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 10.114938] systemd[1]: Finished linger-users.service. buildbot # [ 10.136363] systemd[1]: Finished resolvconf update. buildbot # [ 10.140780] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 10.145807] systemd[1]: Reached target Preparation for Network. buildbot # [ 10.152793] nsncd[463]: Oct 18 06:54:22.785 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 10.159927] systemd[1]: Starting DHCP Client... buildbot # [ 10.163262] systemd[1]: Starting Extra networking commands.... buildbot # [ 10.166913] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 10.197818] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 10.201946] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 10.240430] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped. buildbot # [ 10.247381] systemd[1]: Started backdoor.service. buildbot # connecting to host... buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot: (connecting took 10.68 seconds) buildbot: (finished: waiting for the VM to finish booting, in 11.11 seconds) buildbot # [ 10.444925] dhcpcd[493]: dhcpcd-10.3.2 starting buildbot # [ 10.465358] dhcpcd[536]: dev: loaded udev buildbot # [ 10.526014] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 10.523985] systemd[1]: Finished Extra networking commands.. buildbot # [ 10.529729] systemd[1]: Reached target Network. buildbot # [ 10.552466] systemd[1]: Starting Nginx Web Server... buildbot # [ 10.574865] systemd[1]: Starting PostgreSQL Server... buildbot # [ 10.601764] systemd[1]: Starting SSH Daemon... buildbot # [ 10.626218] systemd[1]: Starting Permit User Sessions... buildbot # [ 10.679413] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 10.710394] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 10.713901] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 10.717746] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 10.718057] cfg80211: failed to load regulatory.db buildbot # [ 10.715468] dhcpcd[536]: no valid interfaces found buildbot # [ 10.718992] dhcpcd[536]: no valid interfaces found buildbot # [ 10.757780] systemd[1]: Finished Permit User Sessions. buildbot # [ 10.773243] systemd[1]: Started Getty on tty1. buildbot # [ 10.773997] systemd[1]: Reached target Login Prompts. buildbot # [ 10.783073] (udev-worker)[318]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 10.800289] (udev-worker)[318]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 10.801746] (udev-worker)[310]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 10.823789] sshd[552]: Server listening on 0.0.0.0 port 22. buildbot # [ 10.828905] systemd[1]: Started SSH Daemon. buildbot # [ 10.829573] sshd[552]: Server listening on :: port 22. buildbot # [ 10.834970] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 10.995366] setup-git-repo-start[575]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.001240] setup-git-repo-start[575]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.007957] setup-git-repo-start[575]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.014825] setup-git-repo-start[575]: hint: call: buildbot # [ 11.018661] setup-git-repo-start[575]: hint: buildbot # [ 11.022227] setup-git-repo-start[575]: hint: git config --global init.defaultBranch buildbot # [ 11.028194] setup-git-repo-start[575]: hint: buildbot # [ 11.030659] setup-git-repo-start[575]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.037196] setup-git-repo-start[575]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.038591] setup-git-repo-start[575]: hint: buildbot # [ 11.039193] setup-git-repo-start[575]: hint: git branch -m buildbot # [ 11.050294] setup-git-repo-start[575]: hint: buildbot # [ 11.050936] setup-git-repo-start[575]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.060207] setup-git-repo-start[575]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 11.065508] postgresql-pre-start[572]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 11.066922] postgresql-pre-start[572]: This user must also own the server process. buildbot # [ 11.079309] postgresql-pre-start[572]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 11.084329] postgresql-pre-start[572]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 11.085652] postgresql-pre-start[572]: The default text search configuration will be set to "english". buildbot # [ 11.086873] postgresql-pre-start[572]: Data page checksums are disabled. buildbot # [ 11.087781] postgresql-pre-start[572]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 11.105043] postgresql-pre-start[572]: creating subdirectories ... ok buildbot # [ 11.105946] postgresql-pre-start[572]: selecting dynamic shared memory implementation ... posix buildbot # [ 11.107396] setup-git-repo-start[582]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 11.121721] setup-git-repo-start[582]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 11.123086] setup-git-repo-start[582]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 11.131749] setup-git-repo-start[582]: hint: call: buildbot # [ 11.135692] setup-git-repo-start[582]: hint: buildbot # [ 11.141233] setup-git-repo-start[582]: hint: git config --global init.defaultBranch buildbot # [ 11.144363] setup-git-repo-start[582]: hint: buildbot # [ 11.149080] setup-git-repo-start[582]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 11.161672] setup-git-repo-start[582]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 11.163075] setup-git-repo-start[582]: hint: buildbot # [ 11.163667] setup-git-repo-start[582]: hint: git branch -m buildbot # [ 11.170456] setup-git-repo-start[582]: hint: buildbot # [ 11.173527] setup-git-repo-start[582]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 11.174909] setup-git-repo-start[582]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 11.188385] nginx-pre-start[570]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok buildbot # [ 11.196731] nginx-pre-start[570]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful buildbot # [ 11.207243] systemd[1]: Started Nginx Web Server. buildbot # [ 11.226077] setup-git-repo-start[593]: [master (root-commit) 40d170d] Initial commit with scheduled effects buildbot # [ 11.227381] setup-git-repo-start[593]: 3 files changed, 131 insertions(+) buildbot # [ 11.240640] setup-git-repo-start[593]: create mode 100644 effects-lib.nix buildbot # [ 11.241704] setup-git-repo-start[593]: create mode 100644 flake.lock buildbot # [ 11.242558] setup-git-repo-start[593]: create mode 100644 flake.nix buildbot # [ 11.243685] systemd-logind[416]: Watching system buttons on /dev/input/event0 (gpio-keys) buildbot # [ 11.260251] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 11.267058] systemd[1]: Starting Address configuration of eth1... buildbot # [ 11.346989] postgresql-pre-start[572]: selecting default "max_connections" ... 100 buildbot # [ 11.438922] setup-git-repo-start[598]: To /srv/repos/test-flake.git buildbot # [ 11.439824] setup-git-repo-start[598]: * [new branch] master -> master buildbot # [ 11.463364] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 11.453087] setup-git-repo-start[598]: branch 'master' set up to track 'origin/master'. buildbot # [ 11.462212] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 11.486145] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 11.469355] dhcpcd[536]: eth0: waiting for carrier buildbot # [ 11.470729] dhcpcd[536]: eth0: carrier acquired buildbot # [ 11.480188] network-addresses-eth1-start[597]: adding address 192.168.1.1/24... done buildbot # [ 11.498026] dhcpcd[536]: DUID 00:01:00:01:32:67:29:a0:52:54:00:12:34:56 buildbot # [ 11.508418] dhcpcd[536]: eth0: IAID 00:12:34:56 buildbot # [ 11.509149] dhcpcd[536]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 11.512952] network-addresses-eth1-start[597]: adding address 2001:db8:1::1/64... done buildbot # [ 11.536970] systemd[1]: Finished Address configuration of eth1. buildbot # [ 11.539512] postgresql-pre-start[572]: selecting default "shared_buffers" ... 128MB buildbot # [ 11.702974] mousedev: PS/2 mouse device common for all mice buildbot # [ 11.734814] systemd-logind[416]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard) buildbot # [ 11.767671] dhcpcd[536]: eth0: soliciting a DHCP lease buildbot # [ 11.773609] dhcpcd[536]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 11.780555] dhcpcd[536]: eth0: probing address 10.0.2.15/24 buildbot: (finished: waiting for unit sshd.service, in 12.51 seconds) buildbot: waiting for unit setup-git-repo.service buildbot: (finished: waiting for unit setup-git-repo.service, in 0.09 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 13.349438] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3 buildbot # [ 13.618086] postgresql-pre-start[572]: selecting default time zone ... UTC buildbot # [ 13.625342] postgresql-pre-start[572]: creating configuration files ... ok buildbot # [ 13.801472] dhcpcd[536]: eth0: soliciting an IPv6 router buildbot # [ 13.802328] dhcpcd[536]: eth0: Router Advertisement from fe80::2 buildbot # [ 13.803156] dhcpcd[536]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 13.809519] dhcpcd[536]: eth0: adding route to fec0::/64 buildbot # [ 13.810321] dhcpcd[536]: eth0: adding default route via fe80::2 buildbot # [ 13.933372] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 13.984748] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.036098] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 14.037244] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 14.041417] systemd[1]: Starting Virtual Console Setup... buildbot # [ 14.075184] systemd-logind[416]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 14.141029] postgresql-pre-start[572]: running bootstrap script ... ok buildbot # [ 14.457521] systemd-vconsole-setup[673]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 14.462386] systemd[1]: Finished Virtual Console Setup. buildbot # [ 14.806958] postgresql-pre-start[572]: performing post-bootstrap initialization ... ok buildbot # [ 14.929536] postgresql-pre-start[572]: syncing data to disk ... ok buildbot # [ 14.931736] postgresql-pre-start[572]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 14.933342] postgresql-pre-start[572]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 14.935542] postgresql-pre-start[572]: Success. You can now start the database server using: buildbot # [ 14.936870] postgresql-pre-start[572]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 15.031413] postgres[691]: [691] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 15.042036] postgres[691]: [691] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 15.043251] postgres[691]: [691] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 15.044819] postgres[691]: [691] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 15.053826] postgres[697]: [697] LOG: database system was shut down at 2026-10-18 06:54:27 GMT buildbot # [ 15.061281] postgres[691]: [691] LOG: database system is ready to accept connections buildbot # [ 15.066184] systemd[1]: Started PostgreSQL Server. buildbot # [ 15.070863] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 15.252455] postgresql-setup-start[713]: CREATE DATABASE buildbot # [ 15.291047] postgresql-setup-start[718]: CREATE ROLE buildbot # [ 15.308626] postgresql-setup-start[720]: ALTER DATABASE buildbot # [ 15.314639] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 15.317822] systemd[1]: Reached target PostgreSQL. buildbot # [ 15.319833] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 15.362193] buildbot-master-pre-start[725]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 16.734402] dhcpcd[536]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 16.736139] dhcpcd[536]: eth0: adding route to 10.0.2.0/24 buildbot # [ 16.737429] dhcpcd[536]: eth0: adding default route via 10.0.2.2 buildbot # [ 16.873419] systemd[1]: Started DHCP Client. buildbot # [ 19.641108] buildbot-master-pre-start[730]: updating existing installation buildbot # [ 19.644156] buildbot-master-pre-start[730]: not touching existing buildbot.tac buildbot # [ 19.645242] buildbot-master-pre-start[730]: creating buildbot.tac.new instead buildbot # [ 19.646197] buildbot-master-pre-start[730]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 19.647331] buildbot-master-pre-start[730]: creating database (postgresql://@/buildbot) buildbot # [ 19.652121] buildbot-master-pre-start[730]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 20.062543] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 20.068239] systemd[1]: Started Buildbot Worker.. buildbot # [ 20.071767] systemd[1]: Reached target Multi-User System. buildbot # [ 20.072846] systemd[1]: Startup finished in 966ms (kernel) + 4.689s (initrd) + 14.416s (userspace) = 20.072s. buildbot: (finished: waiting for unit multi-user.target, in 9.02 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.07 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 21.544353] twistd[826]: Starting worker local-worker-000 buildbot # [ 21.544503] twistd[826]: 2026-10-18T06:54:33+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 21.544577] twistd[826]: 2026-10-18T06:54:34+0000 [-] Loaded. buildbot # [ 21.544644] twistd[826]: 2026-10-18T06:54:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 21.544676] twistd[826]: 2026-10-18T06:54:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 21.544707] twistd[826]: 2026-10-18T06:54:34+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 21.544739] twistd[826]: 2026-10-18T06:54:34+0000 [-] recording hostname in twistd.hostname buildbot # [ 21.556506] twistd[826]: 2026-10-18T06:54:34+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 21.561592] twistd[826]: 2026-10-18T06:54:34+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.0413483070546246 seconds. buildbot # [ 21.566911] twistd[826]: 2026-10-18T06:54:34+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.009220] twistd[825]: 2026-10-18T06:54:33+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 23.009378] twistd[825]: 2026-10-18T06:54:35+0000 [-] Loaded. buildbot # [ 23.009414] twistd[825]: 2026-10-18T06:54:35+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 23.009445] twistd[825]: 2026-10-18T06:54:35+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 23.009476] twistd[825]: 2026-10-18T06:54:35+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 23.023356] twistd[825]: 2026-10-18T06:54:35+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # [ 23.605468] twistd[826]: 2026-10-18T06:54:36+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 23.609203] twistd[826]: 2026-10-18T06:54:36+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 3.0588836016806886 seconds. buildbot # [ 23.612271] twistd[826]: 2026-10-18T06:54:36+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.677002] twistd[825]: 2026-10-18T06:54:36+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 23.775505] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 9 new builders, removing 0 buildbot # [ 23.916160] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 3 new services, removing 0 buildbot # [ 24.107599] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 24.118891] twistd[825]: 2026-10-18T06:54:36+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 24.136673] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 24.352173] twistd[825]: 2026-10-18T06:54:36+0000 [-] BuildbotSite starting on 8010 buildbot # [ 24.355323] twistd[825]: 2026-10-18T06:54:36+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 24.357830] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 5 new workers, removing 0 buildbot # [ 24.368440] twistd[825]: 2026-10-18T06:54:37+0000 [-] PBServerFactory starting on 9989 buildbot # [ 24.371747] twistd[825]: 2026-10-18T06:54:37+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 24.426497] twistd[825]: 2026-10-18T06:54:37+0000 [-] Starting Worker -- version: 2026.06.28 buildbot # [ 24.428239] twistd[825]: 2026-10-18T06:54:37+0000 [-] recording hostname in twistd.hostname buildbot # [ 24.431554] twistd[825]: 2026-10-18T06:54:37+0000 [-] message from master: attached buildbot # [ 24.436710] sshd-session[883]: Accepted publickey for root from ::1 port 55446 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 24.440614] twistd[825]: 2026-10-18T06:54:37+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 24.447324] twistd[825]: 2026-10-18T06:54:37+0000 [-] bot attached buildbot # [ 24.448955] twistd[825]: 2026-10-18T06:54:37+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 24.451952] twistd[825]: 2026-10-18T06:54:37+0000 [-] message from master: attached buildbot # [ 24.456300] sshd-session[883]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.504372] twistd[825]: 2026-10-18T06:54:37+0000 [-] BuildMaster is running buildbot # [ 24.515095] systemd[1]: Created slice Slice /user/0. buildbot # [ 24.520173] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 24.546220] systemd-logind[416]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 24.568485] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 24.574158] systemd[1]: Starting User Manager for UID 0... buildbot # [ 24.608775] (systemd)[893]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.615081] systemd-logind[416]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 24.903900] systemd[893]: Queued start job for default target Main User Target. buildbot # [ 24.913961] systemd[893]: Created slice User Application Slice. buildbot # [ 24.914991] systemd[893]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 24.916140] systemd[893]: Reached target Paths. buildbot # [ 24.917129] systemd[893]: Reached target Timers. buildbot # [ 24.920060] systemd[893]: Starting D-Bus User Message Bus Socket... buildbot # [ 24.923286] systemd[893]: Starting Create User Files and Directories... buildbot # [ 25.022156] systemd[893]: Finished Create User Files and Directories. buildbot # [ 25.062095] systemd[893]: Listening on D-Bus User Message Bus Socket. buildbot # [ 25.064874] systemd[893]: Reached target Sockets. buildbot # [ 25.065691] systemd[893]: Reached target Basic System. buildbot # [ 25.066505] systemd[893]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 25.069967] systemd[893]: Reached target Main User Target. buildbot # [ 25.070838] systemd[893]: Startup finished in 430ms. buildbot # [ 25.071627] systemd[1]: Started User Manager for UID 0. buildbot # [ 25.074694] systemd[1]: Started Session 1 of User root. buildbot # [ 25.103472] sshd-session[905]: Received disconnect from ::1 port 55446:11: disconnected by user buildbot # [ 25.107221] sshd-session[905]: Disconnected from user root ::1 port 55446 buildbot # [ 25.116337] sshd-session[883]: pam_unix(sshd:session): session closed for user root buildbot # [ 25.117514] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 25.121391] systemd-logind[416]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 25.122545] systemd-logind[416]: Removed session 1. buildbot # [ 25.290834] sshd-session[910]: Accepted publickey for root from ::1 port 55450 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 25.303750] sshd-session[910]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 25.318121] systemd-logind[416]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 25.325013] systemd[1]: Started Session 3 of User root. buildbot # [ 25.381348] sshd-session[916]: Received disconnect from ::1 port 55450:11: disconnected by user buildbot # [ 25.382668] sshd-session[916]: Disconnected from user root ::1 port 55450 buildbot # [ 25.383571] sshd-session[910]: pam_unix(sshd:session): session closed for user root buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot # [ 25.396310] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 25.399391] systemd-logind[416]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 25.401957] systemd-logind[416]: Removed session 3. buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.31 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 25.436311] twistd[825]: 2026-10-18T06:54:38+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.10 seconds) (finished: subtest: Master and worker services start, in 4.58 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 20682 0 0100 266 100 266 0 0 17057 0 0100 266 100 266 0 0 14679 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.06 seconds) (finished: subtest: Project is registered, in 0.06 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.33 seconds) (finished: subtest: CLI list-schedules works, in 0.33 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 40d170d..df12c5e master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.09 seconds) (finished: subtest: Push a new commit to trigger build, in 0.09 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3175 0 0100 51 100 51 0 0 2738 0 0100 51 100 51 0 0 2372 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds) buildbot # [ 26.672850] twistd[826]: 2026-10-18T06:54:39+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 26.683446] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=34002) buildbot # [ 26.688970] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.695916] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 26.716085] twistd[825]: 2026-10-18T06:54:39+0000 [-] bot attached buildbot # [ 26.719989] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 26.722523] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 26.729316] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 26.731736] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 26.760303] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 26.762248] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 26.804330] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 26.806100] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 26.807736] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.835681] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.845655] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.846870] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.868283] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.869577] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.870727] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.871872] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached buildbot # [ 26.895018] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 26.899020] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2874 0 0100 51 100 51 0 0 2356 0 0100 51 100 51 0 0 1982 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4088 0 0100 51 100 51 0 0 3058 0 0100 51 100 51 0 0 2470 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4928 0 0100 51 100 51 0 0 3543 0 0100 51 100 51 0 0 2769 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2901 0 0100 51 100 51 0 0 2366 0 0100 51 100 51 0 0 1993 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4690 0 0100 51 100 51 0 0 3303 0 0100 51 100 51 0 0 2621 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5194 0 0100 51 100 51 0 0 3556 0 0100 51 100 51 0 0 2797 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4571 0 0100 51 100 51 0 0 3330 0 0100 51 100 51 0 0 2651 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 34.330879] sshd-session[1001]: Accepted publickey for root from ::1 port 59718 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.343607] sshd-session[1001]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.357374] systemd-logind[416]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.367277] systemd[1]: Started Session 4 of User root. buildbot # [ 34.399727] sshd-session[1004]: Received disconnect from ::1 port 59718:11: disconnected by user buildbot # [ 34.410242] sshd-session[1004]: Disconnected from user root ::1 port 59718 buildbot # [ 34.411697] sshd-session[1001]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.416466] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 34.423627] systemd-logind[416]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 34.428196] systemd-logind[416]: Removed session 4. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2417 0 0100 51 100 51 0 0 2096 0 0100 51 100 51 0 0 1796 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) buildbot # [ 34.617032] sshd-session[1009]: Accepted publickey for root from ::1 port 59734 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.625696] sshd-session[1009]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.635179] systemd-logind[416]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.640389] systemd[1]: Started Session 5 of User root. buildbot # [ 34.675499] sshd-session[1015]: Received disconnect from ::1 port 59734:11: disconnected by user buildbot # [ 34.679330] sshd-session[1015]: Disconnected from user root ::1 port 59734 buildbot # [ 34.683047] sshd-session[1009]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.689037] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 34.689941] systemd-logind[416]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 34.690998] systemd-logind[416]: Removed session 5. buildbot # [ 34.705099] twistd[825]: 2026-10-18T06:54:47+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 34.740843] twistd[825]: 2026-10-18T06:54:47+0000 [-] gitpoller: processing 1 changes: ['df12c5e337ee8400e459ef8b0787a73f30b1ce4b'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 34.844196] twistd[825]: 2026-10-18T06:54:47+0000 [-] added change with revision df12c5e337ee8400e459ef8b0787a73f30b1ce4b to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4540 0 0100 51 100 51 0 0 3321 0 0100 51 100 51 0 0 2655 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2785 0 0100 51 100 51 0 0 2291 0 0100 51 100 51 0 0 1960 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4516 0 0100 51 100 51 0 0 3201 0 0100 51 100 51 0 0 2570 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2943 0 0100 51 100 51 0 0 2340 0 0100 51 100 51 0 0 1980 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 39.883595] twistd[825]: 2026-10-18T06:54:52+0000 [-] added buildset 1 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3531 0 0100 51 100 51 0 0 2895 0 0100 51 100 51 0 0 2482 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 40.021572] twistd[825]: 2026-10-18T06:54:52+0000 [-] starting build using worker buildbot # [ 40.030030] twistd[825]: 2026-10-18T06:54:52+0000 [-] .startBuild buildbot # [ 40.085600] twistd[825]: 2026-10-18T06:54:52+0000 [-] acquireLocks(worker , locks []) buildbot # [ 40.091165] twistd[825]: 2026-10-18T06:54:52+0000 [-] starting build .. pinging the worker buildbot # [ 40.095347] twistd[825]: 2026-10-18T06:54:52+0000 [-] sending ping buildbot # [ 40.098627] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 40.101160] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] message from master: ping buildbot # [ 40.120712] twistd[825]: 2026-10-18T06:54:52+0000 [-] : RemoteCommand.run [0] buildbot # [ 40.122229] twistd[825]: 2026-10-18T06:54:52+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 40.132072] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 40.133404] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 40.134865] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 40.139312] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.142369] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 40.144029] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 40.145776] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 40.154976] twistd[826]: 2026-10-18T06:54:52+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.028037 buildbot # [ 40.157885] twistd[826]: 2026-10-18T06:54:52+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 40.181977] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.212808] twistd[825]: 2026-10-18T06:54:52+0000 [-] : RemoteCommand.run [1] buildbot # [ 40.230425] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 40.231698] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 40.237449] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 40.239694] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 40.248077] twistd[825]: 2026-10-18T06:54:52+0000 [-] : RemoteCommand.run [2] buildbot # [ 40.274266] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 40.275689] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 40.280738] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.286285] twistd[825]: 2026-10-18T06:54:52+0000 [-] : RemoteCommand.run [3] buildbot # [ 40.317218] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # [ 40.321793] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 40.330348] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.336469] twistd[825]: 2026-10-18T06:54:52+0000 [-] : RemoteCommand.run [4] buildbot # [ 40.369018] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 40.373659] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 40.380760] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.388246] twistd[825]: 2026-10-18T06:54:53+0000 [-] No git repo present, making full clone buildbot # [ 40.390211] twistd[825]: 2026-10-18T06:54:53+0000 [-] : RemoteCommand.run [5] buildbot # [ 40.396834] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 40.421555] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 40.427272] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 40.441312] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 40.464123] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.471568] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 40.478062] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 40.488085] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 40.663004] sshd-session[1051]: Accepted publickey for root from ::1 port 59742 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 40.679370] sshd-session[1051]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 40.696396] systemd-logind[416]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 40.706846] systemd[1]: Started Session 6 of User root. buildbot # [ 40.771888] sshd-session[1054]: Received disconnect from ::1 port 59742:11: disconnected by user buildbot # [ 40.781030] sshd-session[1054]: Disconnected from user root ::1 port 59742 buildbot # [ 40.782049] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 40.782921] sshd-session[1051]: pam_unix(sshd:session): session closed for user root buildbot # [ 40.783954] systemd-logind[416]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 40.789220] systemd-logind[416]: Removed session 6. buildbot # [ 40.803226] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.377952 buildbot # [ 40.815128] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 40.819741] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.861233] twistd[825]: 2026-10-18T06:54:53+0000 [-] : RemoteCommand.run [6] buildbot # [ 40.870339] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']' in dir 'build' buildbot # [ 40.874122] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 40.878033] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): RunProcess._startCommand buildbot # [ 40.881811] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f df12c5e337ee8400e459ef8b0787a73f30b1ce4b buildbot # [ 40.887608] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.892387] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): watching logfiles {} buildbot # [ 40.896976] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'df12c5e337ee8400e459ef8b0787a73f30b1ce4b'] buildbot # [ 40.902907] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): using PTY: False buildbot # [ 40.916061] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): command finished with signal None, exit code 0, elapsedTime: 0.056250 buildbot # [ 40.919884] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 40.928517] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.948052] twistd[825]: 2026-10-18T06:54:53+0000 [-] : RemoteCommand.run [7] buildbot # [ 40.951431] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 40.969132] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 7): startCommand:shell buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 40.973073] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 40.982924] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 40.988196] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.995422] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 41.000864] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 41.007416] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 16213 0 0100 401 100 401 0 0 14364 0 0100 401 100 401 0 0 10903 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot # [ 41.136603] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.163661 buildbot # [ 41.144433] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 41.148046] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.162722] twistd[825]: 2026-10-18T06:54:53+0000 [-] : RemoteCommand.run [8] buildbot # [ 41.164352] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 41.185152] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 41.189323] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 41.190923] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 41.197660] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.199947] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 41.202048] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 41.203990] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 41.213428] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.025057 buildbot # [ 41.215392] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 41.242771] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.264116] twistd[825]: 2026-10-18T06:54:53+0000 [-] Got Git revision df12c5e337ee8400e459ef8b0787a73f30b1ce4b buildbot # [ 41.265675] twistd[825]: 2026-10-18T06:54:53+0000 [-] : RemoteCommand.run [9] buildbot # [ 41.287605] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 41.292118] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 41.294709] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 41.301225] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 41.304650] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 41.307346] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 41.312450] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 41.323647] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.036906 buildbot # [ 41.326858] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 41.341730] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.365226] twistd[825]: 2026-10-18T06:54:53+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 41.388180] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'git' complete: success (None) buildbot # [ 41.396853] twistd[825]: 2026-10-18T06:54:54+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 41.416063] twistd[825]: 2026-10-18T06:54:54+0000 [-] : RemoteCommand.run [10] buildbot # [ 41.418205] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 41.427071] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 41.430527] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 41.433077] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 41.435923] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.439294] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 41.441787] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 41.444943] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 41.458561] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.035793 buildbot # [ 41.461227] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot # [ 41.472928] twistd[825]: 2026-10-18T06:54:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.479174] twistd[825]: 2026-10-18T06:54:54+0000 [-] : RemoteCommand.run [11] buildbot # [ 41.484107] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 41.521596] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 41.526122] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 41.539137] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 41.548901] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.555818] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 41.562076] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # [ 41.572003] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # [ 41.677502] systemd[1]: Started Nix Daemon. buildbot # [ 41.763274] nix-daemon[1100]: accepted connection from pid 1099, user buildbot-worker buildbot # [ 41.789182] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.264671 buildbot # [ 41.799512] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 41.802715] twistd[825]: 2026-10-18T06:54:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.830511] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 41.845402] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 41.871063] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 41.883202] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'build flake' complete: success (None) buildbot # [ 41.895917] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0xe53ebac30c20>, hideStepIf=. at 0xe53ebac30cc0>)): [] buildbot # [ 41.904916] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 41.921940] twistd[825]: 2026-10-18T06:54:54+0000 [-] : RemoteCommand.run [12] buildbot # [ 41.930848] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 41.934014] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 41.935342] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 41.938171] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 41.944204] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.947164] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 41.949661] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 41.953371] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 41.959710] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.039089 buildbot # [ 41.962607] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 41.974041] twistd[825]: 2026-10-18T06:54:54+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.997504] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 42.006091] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 42.018355] twistd[825]: 2026-10-18T06:54:54+0000 [-] : RemoteCommand.run [13] buildbot # [ 42.028133] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 42.030600] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 42.031799] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 42.037700] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev df12c5e337ee8400e459ef8b0787a73f30b1ce4b --branch master --repo test-flake buildbot # [ 42.041669] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.045505] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 42.048318] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.052557] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 20595 0 0100 401 100 401 0 0 14739 0 0100 401 100 401 0 0 11513 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 42.331181] nix-daemon[1100]: accepted connection from pid 1112, user buildbot-worker buildbot # [ 42.370083] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.346287 buildbot # [ 42.376811] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 42.379084] twistd[825]: 2026-10-18T06:54:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.538261] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0xe53ebac31440>, logEnviron=False)): [] buildbot # [ 42.548711] twistd[825]: 2026-10-18T06:54:55+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 42.563534] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 42.571006] twistd[825]: 2026-10-18T06:54:55+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 42.587621] twistd[825]: 2026-10-18T06:54:55+0000 [-] : RemoteCommand.run [14] buildbot # [ 42.596118] twistd[825]: 2026-10-18T06:54:55+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 42.598741] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 42.599962] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 42.604577] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev df12c5e337ee8400e459ef8b0787a73f30b1ce4b --branch master --repo test-flake buildbot # [ 42.608510] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 42.612159] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 42.618169] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 42.623037] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 42.849609] nix-daemon[1100]: accepted connection from pid 1121, user buildbot-worker buildbot # [ 42.884209] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.298639 buildbot # [ 42.893480] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 42.895927] twistd[825]: 2026-10-18T06:54:55+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.932520] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0xe53ebac31620>, hideStepIf=. at 0xe53ebac316c0>, logEnviron=False)): [] buildbot # [ 42.946536] twistd[825]: 2026-10-18T06:54:55+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 42.947970] twistd[825]: 2026-10-18T06:54:55+0000 [-] : build finished buildbot # [ 42.964063] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 18981 0 0100 411 100 411 0 0 16333 0 0100 411 100 411 0 0 14496 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.29 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) (finished: subtest: Schedule cache is created, in 0.04 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 54592 0 0100 3793 100 3793 0 0 52585 0 0100 3793 100 3793 0 0 50719 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.11 seconds) buildbot # [ 44.326599] sshd-session[1156]: Accepted publickey for root from ::1 port 55986 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.339276] sshd-session[1156]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.352926] systemd-logind[416]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.357412] systemd[1]: Started Session 7 of User root. buildbot # [ 44.390059] sshd-session[1159]: Received disconnect from ::1 port 55986:11: disconnected by user buildbot # [ 44.394618] sshd-session[1159]: Disconnected from user root ::1 port 55986 buildbot # [ 44.406107] sshd-session[1156]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.407570] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 44.410531] systemd-logind[416]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 44.411937] systemd-logind[416]: Removed session 7. buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 44347 0 0100 3793 100 3793 0 0 41416 0 0100 3793 100 3793 0 0 40310 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot # [ 44.628655] sshd-session[1167]: Accepted publickey for root from ::1 port 55994 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.639669] sshd-session[1167]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.650138] systemd-logind[416]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.656972] systemd[1]: Started Session 8 of User root. buildbot # [ 44.689762] sshd-session[1176]: Received disconnect from ::1 port 55994:11: disconnected by user buildbot # [ 44.693783] sshd-session[1176]: Disconnected from user root ::1 port 55994 buildbot # [ 44.694775] sshd-session[1167]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.697178] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 44.701598] systemd-logind[416]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 44.706376] systemd-logind[416]: Removed session 8. buildbot # [ 44.710334] twistd[825]: 2026-10-18T06:54:57+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 38852 0 0100 3793 100 3793 0 0 37775 0 0100 3793 100 3793 0 0 36824 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 41190 0 0100 3793 100 3793 0 0 40066 0 0100 3793 100 3793 0 0 38956 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0[ 47.926880] twistd[825]: 2026-10-18T06:55:00+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 47.954422] twistd[825]: 2026-10-18T06:55:00+0000 [-] beginning configuration update buildbot # [ 47.955799] twistd[825]: 2026-10-18T06:55:00+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg' buildbot # 100 3793 100 3793 0 0 35013 0 0100 3793 100 3793 0 0 33635 0 0100 3793 100 3793 0 0 32301 0 0 buildbot # [ 48.042816] twistd[825]: 2026-10-18T06:55:00+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds) buildbot # [ 48.067997] twistd[825]: 2026-10-18T06:55:00+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 48.193463] twistd[825]: 2026-10-18T06:55:00+0000 [-] configuration update complete (took 0.260 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 38838 0 0100 4079 100 4079 0 0 37876 0 0100 4079 100 4079 0 0 37030 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 45304 0 0100 4079 100 4079 0 0 43950 0 0100 4079 100 4079 0 0 42807 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds) (finished: subtest: Nightly schedulers are created, in 6.02 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 180.0k 0 0100 2371 100 2371 0 0 148.9k 0 0100 2371 100 2371 0 0 128.0k 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.05 seconds) (finished: subtest: Scheduled effect builder exists, in 0.05 seconds) (finished: run the VM test script, in 50.10 seconds) test script finished in 50.14s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.22 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh