tribuchet: building on jamie Machine state will be reset. To keep it, pass --keep-machine-state start all VLans (finished: start all VLans, in 0.01 seconds) Test will time out and terminate in 3600 seconds run the VM test script buildbot: waiting for unit sshd.service buildbot: waiting for the VM to finish booting buildbot: starting vm buildbot # Disk image does not exist, creating the virtualisation disk image... buildbot: QEMU running (pid 12) buildbot # Formatting '/build/vm-state-buildbot/tmp.t5yOaSNutD', fmt=raw size=1073741824 buildbot # mke2fs 1.47.4 (6-Mar-2025) buildbot # Discarding device blocks: 0/262144 done buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes buildbot # Filesystem UUID: 8698d6f9-ab2c-4233-ba2b-27a182c107cd buildbot # Superblock backups stored on blocks: buildbot # 32768, 98304, 163840, 229376 buildbot # buildbot # Allocating group tables: 0/8 done buildbot # Writing inode tables: 0/8 done buildbot # Creating journal (8192 blocks): done buildbot # Writing superblocks and filesystem accounting information: 0/8 done buildbot # buildbot # Virtualisation disk image created. buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org) buildbot # buildbot # buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA00 buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)... buildbot # buildbot # buildbot # buildbot # buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB00 buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)... buildbot # buildbot # buildbot # Booting from ROM... buildbot # Probing EDD (edd=off to disable)... o[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 2026 buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ns1wh35l8n8h8y6982x817aznl0xbq8z-nixos-system-buildbot-test/init regInfo=/nix/store/bprlsn3r8vs48ya9nllrfsah600zwad5-closure-info/registration console=ttyS0,115200n8 console=tty0 buildbot # [ 0.000000] BIOS-provided physical RAM map: buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved buildbot # [ 0.000000] NX (Execute Disable) protection: active buildbot # [ 0.000000] APIC: Static calls initialized buildbot # [ 0.000000] SMBIOS 2.8 present. buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 buildbot # [ 0.000000] DMI: Memory slots populated: 1/1 buildbot # [ 0.000000] Hypervisor detected: KVM buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x10000000000 buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 buildbot # [ 0.000000] kvm-clock: using sched offset of 509326517 cycles buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns buildbot # [ 0.000005] tsc: Detected 2400.008 MHz processor buildbot # [ 0.000821] last_pfn = 0x3ffdb max_arch_pfn = 0x10000000000 buildbot # [ 0.000848] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs buildbot # [ 0.000851] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT buildbot # [ 0.002741] found SMP MP-table at [mem 0x000f5470-0x000f547f] buildbot # [ 0.002753] Using GB pages for direct mapping buildbot # [ 0.002867] RAMDISK: [mem 0x3e4ba000-0x3ffcffff] buildbot # [ 0.002877] ACPI: Early table checksum verification disabled buildbot # [ 0.002879] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS ) buildbot # [ 0.002883] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002887] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002894] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002896] ACPI: FACS 0x000000003FFE0000 000040 buildbot # [ 0.002898] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002899] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002901] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) buildbot # [ 0.002902] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3] buildbot # [ 0.002903] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f] buildbot # [ 0.002904] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f] buildbot # [ 0.002904] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b] buildbot # [ 0.002905] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3] buildbot # [ 0.002905] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb] buildbot # [ 0.003131] No NUMA configuration found buildbot # [ 0.003132] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff] buildbot # [ 0.003134] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff] buildbot # [ 0.005408] Zone ranges: buildbot # [ 0.005409] DMA [mem 0x0000000000001000-0x0000000000ffffff] buildbot # [ 0.005410] DMA32 [mem 0x0000000001000000-0x000000003ffdafff] buildbot # [ 0.005412] Normal empty buildbot # [ 0.005412] Device empty buildbot # [ 0.005413] Movable zone start for each node buildbot # [ 0.005414] Early memory node ranges buildbot # [ 0.005414] node 0: [mem 0x0000000000001000-0x000000000009efff] buildbot # [ 0.005415] node 0: [mem 0x0000000000100000-0x000000003ffdafff] buildbot # [ 0.005416] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff] buildbot # [ 0.005494] On node 0, zone DMA: 1 pages in unavailable ranges buildbot # [ 0.005754] On node 0, zone DMA: 97 pages in unavailable ranges buildbot # [ 0.023073] On node 0, zone DMA32: 37 pages in unavailable ranges buildbot # [ 0.023482] ACPI: PM-Timer IO Port: 0x608 buildbot # [ 0.023492] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) buildbot # [ 0.023516] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 buildbot # [ 0.023519] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) buildbot # [ 0.023521] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) buildbot # [ 0.023522] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) buildbot # [ 0.023523] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) buildbot # [ 0.023524] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) buildbot # [ 0.023526] ACPI: Using ACPI (MADT) for SMP configuration information buildbot # [ 0.023527] ACPI: HPET id: 0x8086a201 base: 0xfed00000 buildbot # [ 0.023530] TSC deadline timer available buildbot # [ 0.023534] CPU topo: Max. logical packages: 1 buildbot # [ 0.023535] CPU topo: Max. logical dies: 1 buildbot # [ 0.023535] CPU topo: Max. dies per package: 1 buildbot # [ 0.023538] CPU topo: Max. threads per core: 1 buildbot # [ 0.023539] CPU topo: Num. cores per package: 1 buildbot # [ 0.023539] CPU topo: Num. threads per package: 1 buildbot # [ 0.023539] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs buildbot # [ 0.023556] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() buildbot # [ 0.023585] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] buildbot # [ 0.023586] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] buildbot # [ 0.023588] [mem 0x40000000-0xfeffbfff] available for PCI devices buildbot # [ 0.023589] Booting paravirtualized kernel on KVM buildbot # [ 0.023592] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns buildbot # [ 0.028034] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1 buildbot # [ 0.030404] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152 buildbot # [ 0.030448] kvm-guest: PV spinlocks disabled, single CPU buildbot # [ 0.030449] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/ns1wh35l8n8h8y6982x817aznl0xbq8z-nixos-system-buildbot-test/init regInfo=/nix/store/bprlsn3r8vs48ya9nllrfsah600zwad5-closure-info/registration console=ttyS0,115200n8 console=tty0 buildbot # [ 0.030543] Unknown kernel command line parameters "regInfo=/nix/store/bprlsn3r8vs48ya9nllrfsah600zwad5-closure-info/registration", will be passed to user space. buildbot # [ 0.030555] random: crng init done buildbot # [ 0.030555] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes buildbot # [ 0.030576] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) buildbot # [ 0.031098] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) buildbot # [ 0.031127] Fallback order for Node 0: 0 buildbot # [ 0.031130] Built 1 zonelists, mobility grouping on. Total pages: 262009 buildbot # [ 0.031131] Policy zone: DMA32 buildbot # [ 0.033254] mem auto-init: stack:all(zero), heap alloc:on, heap free:off buildbot # [ 0.035589] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 buildbot # [ 0.037774] allocated 2097152 bytes of page_ext buildbot # [ 0.047240] ftrace: allocating 48598 entries in 192 pages buildbot # [ 0.047242] ftrace: allocated 192 pages with 2 groups buildbot # [ 0.048070] Dynamic Preempt: lazy buildbot # [ 0.048203] rcu: Preemptible hierarchical RCU implementation. buildbot # [ 0.048203] rcu: RCU event tracing is enabled. buildbot # [ 0.048204] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1. buildbot # [ 0.048205] Trampoline variant of Tasks RCU enabled. buildbot # [ 0.048206] Rude variant of Tasks RCU enabled. buildbot # [ 0.048206] Tracing variant of Tasks RCU enabled. buildbot # [ 0.048207] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. buildbot # [ 0.048207] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 buildbot # [ 0.048466] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.048467] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.048468] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. buildbot # [ 0.052750] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16 buildbot # [ 0.053029] rcu: srcu_init: Setting srcu_struct sizes based on contention. buildbot # [ 0.053130] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) buildbot # [ 0.056660] Console: colour VGA+ 80x25 buildbot # [ 0.056663] printk: legacy console [tty0] enabled buildbot # [ 0.084807] printk: legacy console [ttyS0] enabled buildbot # [ 0.187696] ACPI: Core revision 20250807 buildbot # [ 0.188609] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns buildbot # [ 0.190275] APIC: Switch to symmetric I/O mode setup buildbot # [ 0.191276] x2apic enabled buildbot # [ 0.192036] APIC: Switched APIC routing to: physical x2apic buildbot # [ 0.193875] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 buildbot # [ 0.194934] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns buildbot # [ 0.196734] Calibrating delay loop (skipped) preset value.. 4800.01 BogoMIPS (lpj=2400008) buildbot # [ 0.198754] x86/cpu: User Mode Instruction Prevention (UMIP) activated buildbot # [ 0.199895] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127 buildbot # [ 0.200731] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0 buildbot # [ 0.201735] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto buildbot # [ 0.202731] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl buildbot # [ 0.203731] Transient Scheduler Attacks: Vulnerable: No microcode buildbot # [ 0.204731] Spectre V2 : Mitigation: Enhanced / Automatic IBRS buildbot # [ 0.206481] Speculative Return Stack Overflow: Mitigation: Safe RET buildbot # [ 0.207533] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization buildbot # [ 0.208735] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier buildbot # [ 0.209732] active return thunk: srso_alias_return_thunk buildbot # [ 0.211456] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' buildbot # [ 0.212731] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' buildbot # [ 0.213731] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' buildbot # [ 0.215731] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' buildbot # [ 0.216731] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' buildbot # [ 0.218555] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' buildbot # [ 0.219586] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' buildbot # [ 0.220732] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 buildbot # [ 0.221731] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64 buildbot # [ 0.222731] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512 buildbot # [ 0.223730] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024 buildbot # [ 0.224731] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8 buildbot # [ 0.225731] x86/fpu: Enabled xstate features 0x2e7, context size is 2440 bytes, using 'compacted' format. buildbot # [ 0.259795] Freeing SMP alternatives memory: 44K buildbot # [ 0.260591] pid_max: default: 32768 minimum: 301 buildbot # [ 0.261438] LSM: initializing lsm=capability,landlock,yama,bpf,ima buildbot # [ 0.262639] landlock: Up and running. buildbot # [ 0.263221] Yama: becoming mindful. buildbot # [ 0.263941] LSM support for eBPF active buildbot # [ 0.264803] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.265755] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) buildbot # [ 0.267632] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1) buildbot # [ 0.268298] Performance Events: Fam17h+ core perfctr, AMD PMU driver. buildbot # [ 0.268736] ... version: 2 buildbot # [ 0.269480] ... bit width: 48 buildbot # [ 0.269734] ... generic counters: 6 buildbot # [ 0.270510] ... generic bitmap: 000000000000003f buildbot # [ 0.270744] ... fixed-purpose counters: 0 buildbot # [ 0.271527] ... fixed-purpose bitmap: 0000000000000000 buildbot # [ 0.271734] ... value mask: 0000ffffffffffff buildbot # [ 0.272696] ... max period: 00007fffffffffff buildbot # [ 0.273483] ... global_ctrl mask: 000000000000003f buildbot # [ 0.273861] signal: max sigframe size: 3376 buildbot # [ 0.274708] rcu: Hierarchical SRCU implementation. buildbot # [ 0.275376] rcu: Max phase no-delay instances is 400. buildbot # [ 0.280224] smp: Bringing up secondary CPUs ... buildbot # [ 0.280747] smp: Brought up 1 node, 1 CPU buildbot # [ 0.281440] smpboot: Total of 1 processors activated (4800.01 BogoMIPS) buildbot # [ 0.281932] Memory: 942400K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved) buildbot # [ 0.282985] devtmpfs: initialized buildbot # [ 0.283782] x86/mm: Memory block size: 128MB buildbot # [ 0.285568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns buildbot # [ 0.286758] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.287758] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear). buildbot # [ 0.288809] pinctrl core: initialized pinctrl subsystem buildbot # [ 0.289999] PM: RTC time: 06:54:21, date: 2026-10-18 buildbot # [ 0.293481] NET: Registered PF_NETLINK/PF_ROUTE protocol family buildbot # [ 0.294115] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations buildbot # [ 0.294751] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations buildbot # [ 0.295881] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations buildbot # [ 0.296743] audit: initializing netlink subsys (disabled) buildbot # [ 0.297932] thermal_sys: Registered thermal governor 'fair_share' buildbot # [ 0.297934] thermal_sys: Registered thermal governor 'bang_bang' buildbot # [ 0.298738] audit: type=2000 audit(1792306462.418:1): state=initialized audit_enabled=0 res=1 buildbot # [ 0.300734] thermal_sys: Registered thermal governor 'step_wise' buildbot # [ 0.300736] thermal_sys: Registered thermal governor 'user_space' buildbot # [ 0.301733] thermal_sys: Registered thermal governor 'power_allocator' buildbot # [ 0.302715] cpuidle: using governor menu buildbot # [ 0.304866] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 buildbot # [ 0.305945] PCI: Using configuration type 1 for base access buildbot # [ 0.306734] PCI: Using configuration type 1 for extended access buildbot # [ 0.307935] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. buildbot # [ 0.315032] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages buildbot # [ 0.315735] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page buildbot # [ 0.320735] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages buildbot # [ 0.321741] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page buildbot # [ 0.330332] ACPI: Added _OSI(Module Device) buildbot # [ 0.330735] ACPI: Added _OSI(Processor Device) buildbot # [ 0.331515] ACPI: Added _OSI(Processor Aggregator Device) buildbot # [ 0.337550] ACPI: 1 ACPI AML tables successfully acquired and loaded buildbot # [ 0.341264] ACPI: Interpreter enabled buildbot # [ 0.341749] ACPI: PM: (supports S0 S3 S4 S5) buildbot # [ 0.342502] ACPI: Using IOAPIC for interrupt routing buildbot # [ 0.342750] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug buildbot # [ 0.347734] PCI: Using E820 reservations for host bridge windows buildbot # [ 0.348863] ACPI: Enabled 2 GPEs in block 00 to 0F buildbot # [ 0.357687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) buildbot # [ 0.359007] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] buildbot # [ 0.360042] acpiphp: Slot [3] registered buildbot # [ 0.360765] acpiphp: Slot [4] registered buildbot # [ 0.361499] acpiphp: Slot [5] registered buildbot # [ 0.361755] acpiphp: Slot [6] registered buildbot # [ 0.362469] acpiphp: Slot [7] registered buildbot # [ 0.362770] acpiphp: Slot [8] registered buildbot # [ 0.363508] acpiphp: Slot [9] registered buildbot # [ 0.363754] acpiphp: Slot [10] registered buildbot # [ 0.364481] acpiphp: Slot [11] registered buildbot # [ 0.364764] acpiphp: Slot [12] registered buildbot # [ 0.365559] acpiphp: Slot [13] registered buildbot # [ 0.366307] acpiphp: Slot [14] registered buildbot # [ 0.366752] acpiphp: Slot [15] registered buildbot # [ 0.367479] acpiphp: Slot [16] registered buildbot # [ 0.367763] acpiphp: Slot [17] registered buildbot # [ 0.368534] acpiphp: Slot [18] registered buildbot # [ 0.368761] acpiphp: Slot [19] registered buildbot # [ 0.369467] acpiphp: Slot [20] registered buildbot # [ 0.369752] acpiphp: Slot [21] registered buildbot # [ 0.370511] acpiphp: Slot [22] registered buildbot # [ 0.370762] acpiphp: Slot [23] registered buildbot # [ 0.371468] acpiphp: Slot [24] registered buildbot # [ 0.371754] acpiphp: Slot [25] registered buildbot # [ 0.372511] acpiphp: Slot [26] registered buildbot # [ 0.372758] acpiphp: Slot [27] registered buildbot # [ 0.373463] acpiphp: Slot [28] registered buildbot # [ 0.373753] acpiphp: Slot [29] registered buildbot # [ 0.374510] acpiphp: Slot [30] registered buildbot # [ 0.374768] acpiphp: Slot [31] registered buildbot # [ 0.375501] PCI host bridge to bus 0000:00 buildbot # [ 0.375743] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] buildbot # [ 0.376761] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] buildbot # [ 0.377734] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] buildbot # [ 0.378733] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window] buildbot # [ 0.379733] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window] buildbot # [ 0.380734] pci_bus 0000:00: root bus resource [bus 00-ff] buildbot # [ 0.381880] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint buildbot # [ 0.383169] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint buildbot # [ 0.384152] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint buildbot # [ 0.385787] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef] buildbot # [ 0.386733] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk buildbot # [ 0.387733] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk buildbot # [ 0.388733] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk buildbot # [ 0.389734] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk buildbot # [ 0.390933] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint buildbot # [ 0.392763] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f] buildbot # [ 0.394722] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint buildbot # [ 0.396074] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI buildbot # [ 0.396740] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB buildbot # [ 0.397960] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint buildbot # [ 0.400709] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref] buildbot # [ 0.401637] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff] buildbot # [ 0.402535] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref] buildbot # [ 0.403735] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] buildbot # [ 0.405481] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.408769] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f] buildbot # [ 0.409740] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff] buildbot # [ 0.410755] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref] buildbot # [ 0.411740] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref] buildbot # [ 0.414126] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.415764] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f] buildbot # [ 0.416687] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff] buildbot # [ 0.417755] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref] buildbot # [ 0.420041] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.421767] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf] buildbot # [ 0.422691] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff] buildbot # [ 0.423553] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref] buildbot # [ 0.425864] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.427741] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f] buildbot # [ 0.428658] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff] buildbot # [ 0.429530] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref] buildbot # [ 0.431853] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint buildbot # [ 0.434975] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f] buildbot # [ 0.436439] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff] buildbot # [ 0.437573] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref] buildbot # [ 0.439902] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint buildbot # [ 0.442768] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f] buildbot # [ 0.443718] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff] buildbot # [ 0.444547] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref] buildbot # [ 0.446911] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint buildbot # [ 0.449742] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf] buildbot # [ 0.450740] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff] buildbot # [ 0.451755] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref] buildbot # [ 0.452739] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref] buildbot # [ 0.455003] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint buildbot # [ 0.456746] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff] buildbot # [ 0.457762] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref] buildbot # [ 0.460005] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint buildbot # [ 0.462629] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff] buildbot # [ 0.463486] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff] buildbot # [ 0.463756] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref] buildbot # [ 0.465977] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint buildbot # [ 0.467765] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df] buildbot # [ 0.468685] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff] buildbot # [ 0.469560] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref] buildbot # [ 0.475782] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 buildbot # [ 0.476881] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 buildbot # [ 0.477862] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 buildbot # [ 0.478858] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 buildbot # [ 0.479870] ACPI: PCI: Interrupt link LNKS configured for IRQ 9 buildbot # [ 0.481967] iommu: Default domain type: Translated buildbot # [ 0.482741] iommu: DMA domain TLB invalidation policy: lazy mode buildbot # [ 0.483990] ACPI: bus type USB registered buildbot # [ 0.484786] usbcore: registered new interface driver usbfs buildbot # [ 0.485757] usbcore: registered new interface driver hub buildbot # [ 0.486752] usbcore: registered new device driver usb buildbot # [ 0.488575] NetLabel: Initializing buildbot # [ 0.489132] NetLabel: domain hash size = 128 buildbot # [ 0.489734] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO buildbot # [ 0.490737] NetLabel: unlabeled traffic allowed by default buildbot # [ 0.491736] PCI: Using ACPI for IRQ routing buildbot # [ 0.492861] pci 0000:00:02.0: vgaarb: setting as boot VGA device buildbot # [ 0.493730] pci 0000:00:02.0: vgaarb: bridge control possible buildbot # [ 0.493730] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none buildbot # [ 0.493736] vgaarb: loaded buildbot # [ 0.494459] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 buildbot # [ 0.494735] hpet0: 3 comparators, 64-bit 100.000000 MHz counter buildbot # [ 0.498804] clocksource: Switched to clocksource kvm-clock buildbot # [ 0.500352] VFS: Disk quotas dquot_6.6.0 buildbot # [ 0.502903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) buildbot # [ 0.504362] pnp: PnP ACPI init buildbot # [ 0.505476] pnp: PnP ACPI: found 6 devices buildbot # [ 0.513314] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns buildbot # [ 0.514830] clocksource: Switched to clocksource acpi_pm buildbot # [ 0.515881] NET: Registered PF_INET protocol family buildbot # [ 0.516920] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) buildbot # [ 0.533997] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) buildbot # [ 0.535853] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) buildbot # [ 0.537211] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) buildbot # [ 0.538514] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) buildbot # [ 0.539746] TCP: Hash tables configured (established 8192 bind 8192) buildbot # [ 0.540841] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear) buildbot # [ 0.542181] UDP hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.543274] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear) buildbot # [ 0.544515] NET: Registered PF_UNIX/PF_LOCAL protocol family buildbot # [ 0.545487] NET: Registered PF_XDP protocol family buildbot # [ 0.546347] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] buildbot # [ 0.547340] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] buildbot # [ 0.548332] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] buildbot # [ 0.549445] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window] buildbot # [ 0.550543] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window] buildbot # [ 0.551757] pci 0000:00:01.0: PIIX3: Enabling Passive Release buildbot # [ 0.552668] pci 0000:00:00.0: Limiting direct PCI/PCI transfers buildbot # [ 0.555103] ACPI: \_SB_.LNKD: Enabled at IRQ 11 buildbot # [ 0.557679] PCI: CLS 0 bytes, default 64 buildbot # [ 0.558587] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983f10a64, max_idle_ns: 440795218721 ns buildbot # [ 0.560307] Trying to unpack rootfs image as initramfs... buildbot # [ 0.603976] Initialise system trusted keyrings buildbot # [ 0.606877] workingset: timestamp_bits=40 max_order=18 bucket_order=0 buildbot # [ 0.629747] Key type asymmetric registered buildbot # [ 0.630422] Asymmetric key parser 'x509' registered buildbot # [ 0.631305] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) buildbot # [ 0.634821] io scheduler mq-deadline registered buildbot # [ 0.635557] io scheduler kyber registered buildbot # [ 0.639318] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled buildbot # [ 0.640571] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A buildbot # [ 0.644497] Linux agpgart interface v0.103 buildbot # [ 0.645294] ACPI: bus type drm_connector registered buildbot # [ 0.648125] usbcore: registered new interface driver usbserial_generic buildbot # [ 0.649210] usbserial: USB Serial support registered for generic buildbot # [ 0.652730] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS. buildbot # [ 0.652730] Please enable it if your BIOS has the CPPC option. buildbot # [ 0.654957] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled buildbot # [ 0.658823] drop_monitor: Initializing network drop monitor service buildbot # [ 0.660038] NET: Registered PF_INET6 protocol family buildbot # [ 0.663178] Segment Routing with IPv6 buildbot # [ 0.665730] In-situ OAM (IOAM) with IPv6 buildbot # [ 0.666771] IPI shorthand broadcast: enabled buildbot # [ 0.675120] sched_clock: Marking stable (536014743, 138695141)->(751105613, -76395729) buildbot # [ 0.679803] registered taskstats version 1 buildbot # [ 0.680768] Loading compiled-in X.509 certificates buildbot # [ 0.698750] Demotion targets for Node 0: null buildbot # [ 0.699571] Key type .fscrypt registered buildbot # [ 0.700313] Key type fscrypt-provisioning registered buildbot # [ 0.701247] ima: No TPM chip found, activating TPM-bypass! buildbot # [ 0.703723] ima: Allocated hash algorithm: sha1 buildbot # [ 0.704493] ima: No architecture policies found buildbot # [ 0.708724] PM: Magic number: 14:901:923 buildbot # [ 0.710347] RAS: Correctable Errors collector initialized. buildbot # [ 0.719472] clk: Disabling unused clocks buildbot # [ 0.721723] PM: genpd: Disabling unused power domains buildbot # [ 0.875104] Freeing initrd memory: 27736K buildbot # [ 0.878235] Freeing unused decrypted memory: 2028K buildbot # [ 0.880833] Freeing unused kernel image (initmem) memory: 3636K buildbot # [ 0.881942] Write protecting the kernel read-only data: 32768k buildbot # [ 0.883808] Freeing unused kernel image (text/rodata gap) memory: 1272K buildbot # [ 0.885286] Freeing unused kernel image (rodata/data gap) memory: 776K buildbot # [ 0.936971] x86/mm: Checked W+X mappings: passed, no W+X pages found. buildbot # [ 0.938060] Run /init as init process buildbot # [ 0.948908] systemd[1]: Inserted module 'autofs4' buildbot # [ 0.964446] fuse: init (API version 7.45) buildbot # [ 0.970969] ACPI: \_SB_.LNKC: Enabled at IRQ 10 buildbot # [ 0.977270] ACPI: \_SB_.LNKA: Enabled at IRQ 10 buildbot # [ 0.980233] ACPI: \_SB_.LNKB: Enabled at IRQ 11 buildbot # [ 1.008504] systemd[1]: Successfully made /usr/ read-only. buildbot # [ 1.345612] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 1.357999] systemd[1]: Detected virtualization kvm. buildbot # [ 1.360185] systemd[1]: Detected architecture x86-64. buildbot # [ 1.362411] systemd[1]: Running in initrd. buildbot # [ 1.365172] systemd[1]: Initializing machine ID from random generator. buildbot # [ 1.368110] systemd[1]: Hostname set to . buildbot # [ 1.433212] systemd[1]: Queued start job for default target Initrd Default Target. buildbot # [ 1.437055] systemd[1]: Created slice Slice /system/modprobe. buildbot # [ 1.438284] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 1.439760] systemd[1]: Expecting device /dev/disk/by-label/nixos... buildbot # [ 1.440904] systemd[1]: Reached target Path Units. buildbot # [ 1.441772] systemd[1]: Reached target Slice Units. buildbot # [ 1.442643] systemd[1]: Reached target Swaps. buildbot # [ 1.443477] systemd[1]: Reached target Timer Units. buildbot # [ 1.444524] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 1.445869] systemd[1]: Listening on Journal Socket (/dev/log). buildbot # [ 1.447122] systemd[1]: Listening on Journal Sockets. buildbot # [ 1.448267] systemd[1]: Listening on udev Control Socket. buildbot # [ 1.449353] systemd[1]: Listening on udev Kernel Socket. buildbot # [ 1.450365] systemd[1]: Reached target Socket Units. buildbot # [ 1.452294] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 1.456780] systemd[1]: Starting Load Kernel Module 9pnet_virtio... buildbot # [ 1.461679] systemd[1]: Starting Load Kernel Module configfs... buildbot # [ 1.474796] systemd[1]: Starting Journal Service... buildbot # [ 1.486810] systemd[1]: Starting Load Kernel Modules... buildbot # [ 1.493833] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 1.503885] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 1.509666] netfs: FS-Cache loaded buildbot # [ 1.524122] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 1.529431] 9pnet: Installing 9P2000 support buildbot # [ 1.533973] systemd[1]: modprobe@configfs.service: Deactivated successfully. buildbot # [ 1.537059] systemd-journald[67]: Collecting audit messages is disabled. buildbot # [ 1.542232] systemd[1]: Finished Load Kernel Module configfs. buildbot # [ 1.569912] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. buildbot # [ 1.578742] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev buildbot # [ 1.596276] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully. buildbot # [ 1.603852] systemd[1]: Finished Load Kernel Module 9pnet_virtio. buildbot # [ 1.609798] systemd[1]: Finished Load Kernel Modules. buildbot # [ 1.614187] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config buildbot # [ 1.623783] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 1.635785] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 1.655095] systemd[1]: Started Journal Service. buildbot # [ 1.517549] systemd-modules-load[68]: Inserted module 'dm_mod' buildbot # [ 1.521657] systemd-modules-load[68]: Inserted module 'virtio_balloon' buildbot # [ 1.523646] systemd-modules-load[68]: Inserted module 'virtio_gpu' buildbot # [ 1.538065] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 1.543182] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 1.546076] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 1.564250] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 1.566168] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 1.567710] systemd[1]: Reached target Local File Systems. buildbot # [ 1.570982] systemd[1]: Starting Create System Files and Directories... buildbot # [ 1.576139] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 1.605391] systemd[1]: Finished Create System Files and Directories. buildbot # [ 1.622688] systemd-udevd[83]: Using default interface naming scheme 'v260'. buildbot # [ 1.648571] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 1.706086] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 1.706939] systemd[1]: Reached target System Initialization. buildbot # [ 1.707941] systemd[1]: Reached target Basic System. buildbot # [ 2.029350] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 buildbot # [ 2.054279] serio: i8042 KBD port at 0x60,0x64 irq 1 buildbot # [ 2.055029] serio: i8042 AUX port at 0x60,0x64 irq 12 buildbot # [ 2.065615] uhci_hcd 0000:00:01.2: UHCI Host Controller buildbot # [ 2.066442] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 buildbot # [ 2.072309] virtio_blk virtio5: 1/0/0 default/read/poll queues buildbot # [ 2.090400] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB) buildbot # [ 2.092660] uhci_hcd 0000:00:01.2: detected 2 ports buildbot # [ 2.100097] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100 buildbot # [ 2.105392] SCSI subsystem initialized buildbot # [ 2.114191] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18 buildbot # [ 2.115346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 buildbot # [ 2.132869] usb usb1: Product: UHCI Host Controller buildbot # [ 2.133531] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd buildbot # [ 2.136916] usb usb1: SerialNumber: 0000:00:01.2 buildbot # [ 2.147297] hub 1-0:1.0: USB hub found buildbot # [ 2.150733] hub 1-0:1.0: 2 ports detected buildbot # [ 2.164157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 buildbot # [ 2.029858] (udev-worker)[87]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.035123] systemd[1]: Starting Virtual Console Setup... buildbot # [ 2.047920] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 2.051805] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 2.073303] systemd-vconsole-setup[99]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 2.076221] systemd[1]: Finished Virtual Console Setup. buildbot # [ 2.086374] systemd[1]: Found device /dev/disk/by-label/nixos. buildbot # [ 2.088917] systemd[1]: Reached target Initrd Root Device. buildbot # [ 2.094068] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos... buildbot # [ 2.259377] scsi host0: ata_piix buildbot # [ 2.263118] scsi host1: ata_piix buildbot # [ 2.263669] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0 buildbot # [ 2.128941] systemd-fsck[109]: nixos: clean, 12/65536 files, 13019/262144 blocks buildbot # [ 2.269115] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0 buildbot # [ 2.135130] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos. buildbot # [ 2.376804] usb 1-1: new full-speed USB device number 2 using uhci_hcd buildbot # [ 2.425391] ata2: found unknown device (class 0) buildbot # [ 2.428589] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 buildbot # [ 2.434124] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 buildbot # [ 2.480211] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray buildbot # [ 2.489164] cdrom: Uniform CD-ROM driver Revision: 3.20 buildbot # [ 2.378745] systemd[1]: Mounting /sysroot... buildbot # [ 2.543277] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00 buildbot # [ 2.544607] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10 buildbot # [ 2.546848] usb 1-1: Product: QEMU USB Tablet buildbot # [ 2.547551] usb 1-1: Manufacturer: QEMU buildbot # [ 2.549717] usb 1-1: SerialNumber: 28754-0000:00:01.2-1 buildbot # [ 2.587914] hid: raw HID events driver (C) Jiri Kosina buildbot # [ 2.612173] usbcore: registered new interface driver usbhid buildbot # [ 2.614107] usbhid: USB HID core driver buildbot # [ 2.625586] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 buildbot # [ 2.634405] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 buildbot # [ 2.648230] EXT4-fs (vda): mounted filesystem 8698d6f9-ab2c-4233-ba2b-27a182c107cd r/w with ordered data mode. Quota mode: none. buildbot # [ 2.515108] systemd[1]: Mounted /sysroot. buildbot # [ 2.517609] systemd[1]: Reached target Initrd Root File System. buildbot # [ 2.523785] systemd[1]: Mounting /sysroot/nix/.ro-store... buildbot # [ 2.529763] systemd[1]: Mounting /sysroot/nix/.rw-store... buildbot # [ 2.538041] systemd[1]: Mounting /sysroot/run... buildbot # [ 2.542132] systemd[1]: Mounting /sysroot/tmp/shared... buildbot # [ 2.547131] systemd[1]: Mounting /sysroot/tmp/xchg... buildbot # [ 2.556271] systemd[1]: Starting Mountpoints Configured in the Real Root... buildbot # [ 2.710092] 9p: Installing v9fs 9p2000 file system support buildbot # [ 2.586239] systemd[1]: Mounted /sysroot/nix/.rw-store. buildbot # [ 2.588834] systemd[1]: Mounted /sysroot/nix/.ro-store. buildbot # [ 2.592580] systemd[1]: Mounted /sysroot/run. buildbot # [ 2.593636] systemd[1]: Mounted /sysroot/tmp/shared. buildbot # [ 2.594692] systemd[1]: Mounted /sysroot/tmp/xchg. buildbot # [ 2.596272] systemd-sysroot-fstab-check[132]: /sysroot should be mounted in the initrd, will request daemon-reload. buildbot # [ 2.602521] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 2.604417] systemd[1]: Reload requested from client PID 132 ('systemd-sysroot') (unit initrd-parse-etc.service)... buildbot # [ 2.606241] systemd[1]: Reloading... buildbot # [ 2.680671] systemd[1]: Reloading finished in 73 ms. buildbot # [ 2.688543] systemd-sysroot-fstab-check[132]: Requesting initrd-fs.target/start/replace... buildbot # [ 2.690955] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 2.692647] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 2.694743] systemd-sysroot-fstab-check[132]: Requesting swap.target/start/replace... buildbot # [ 2.698995] systemd[1]: initrd-parse-etc.service: Deactivated successfully. buildbot # [ 2.700585] systemd[1]: Finished Mountpoints Configured in the Real Root. buildbot # [ 2.701755] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies. buildbot # [ 2.704133] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 2.713191] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 2.714745] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.380533] systemd[1]: Mounting /sysroot/nix/store... buildbot # [ 3.425255] systemd[1]: Mounted /sysroot/nix/store. buildbot # [ 3.429237] systemd[1]: Reached target Initrd File Systems. buildbot # [ 3.434157] systemd[1]: Starting Find NixOS closure... buildbot # [ 3.438654] systemd[1]: Starting Create Volatile Files and Directories in the Real Root... buildbot # [ 3.461657] systemd[1]: Finished Create Volatile Files and Directories in the Real Root. buildbot # [ 3.464104] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully. buildbot # [ 3.471534] systemd[1]: Finished Find NixOS closure. buildbot # [ 3.472907] systemd[1]: Reached target Initrd Default Target. buildbot # [ 3.474946] systemd[1]: Starting Cleaning Up and Shutting Down Daemons... buildbot # [ 3.487440] systemd[1]: Stopped target Initrd Default Target. buildbot # [ 3.488935] systemd[1]: Stopped target Basic System. buildbot # [ 3.489986] systemd[1]: Stopped target Initrd Root Device. buildbot # [ 3.491224] systemd[1]: Stopped target Path Units. buildbot # [ 3.493111] systemd[1]: systemd-ask-password-console.path: Deactivated successfully. buildbot # [ 3.494345] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch. buildbot # [ 3.495545] systemd[1]: Stopped target Slice Units. buildbot # [ 3.496530] systemd[1]: Stopped target Socket Units. buildbot # [ 3.497364] systemd[1]: Stopped target System Initialization. buildbot # [ 3.498302] systemd[1]: Stopped target Swaps. buildbot # [ 3.499030] systemd[1]: Stopped target Timer Units. buildbot # [ 3.499821] systemd[1]: dbus.socket: Deactivated successfully. buildbot # [ 3.502074] systemd[1]: Closed D-Bus System Message Bus Socket. buildbot # [ 3.503169] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully. buildbot # [ 3.504330] systemd[1]: Stopped Find NixOS closure. buildbot # [ 3.505309] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 3.507320] systemd[1]: Starting rw-sysroot-nix-store.service... buildbot # [ 3.508432] systemd[1]: systemd-sysctl.service: Deactivated successfully. buildbot # [ 3.510270] systemd[1]: Stopped Apply Kernel Variables. buildbot # [ 3.511372] systemd[1]: systemd-modules-load.service: Deactivated successfully. buildbot # [ 3.512693] systemd[1]: Stopped Load Kernel Modules. buildbot # [ 3.514139] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully. buildbot # [ 3.515590] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root. buildbot # [ 3.516912] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully. buildbot # [ 3.519126] systemd[1]: Stopped Create System Files and Directories. buildbot # [ 3.520164] systemd[1]: Stopped target Local File Systems. buildbot # [ 3.521247] systemd[1]: Stopped target Preparation for Local File Systems. buildbot # [ 3.522494] systemd[1]: systemd-udev-trigger.service: Deactivated successfully. buildbot # [ 3.524125] systemd[1]: Stopped Coldplug All udev Devices. buildbot # [ 3.526108] systemd[1]: Stopping Rule-based Manager for Device Events and Files... buildbot # [ 3.527307] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 3.528895] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 3.539420] systemd[1]: initrd-cleanup.service: Deactivated successfully. buildbot # [ 3.542882] systemd[1]: Finished Cleaning Up and Shutting Down Daemons. buildbot # [ 3.543980] systemd[1]: systemd-udevd.service: Deactivated successfully. buildbot # [ 3.547124] systemd[1]: Stopped Rule-based Manager for Device Events and Files. buildbot # [ 3.549660] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully. buildbot # [ 3.551270] systemd[1]: Finished rw-sysroot-nix-store.service. buildbot # [ 3.553599] systemd[1]: systemd-udevd-control.socket: Deactivated successfully. buildbot # [ 3.555086] systemd[1]: Closed udev Control Socket. buildbot # [ 3.557090] systemd[1]: Starting Cleanup udev Database... buildbot # [ 3.559092] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully. buildbot # [ 3.560352] systemd[1]: Stopped Create Static Device Nodes in /dev. buildbot # [ 3.561329] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully. buildbot # [ 3.562560] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully. buildbot # [ 3.563712] systemd[1]: kmod-static-nodes.service: Deactivated successfully. buildbot # [ 3.564888] systemd[1]: Stopped Create List of Static Device Nodes. buildbot # [ 3.581060] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully. buildbot # [ 3.582295] systemd[1]: Finished Cleanup udev Database. buildbot # [ 3.583139] systemd[1]: Reached target Switch Root. buildbot # [ 3.584563] systemd[1]: Starting NixOS Activation... buildbot # [ 3.739304] initrd-nixos-activation-start[178]: booting system configuration /nix/store/ns1wh35l8n8h8y6982x817aznl0xbq8z-nixos-system-buildbot-test buildbot # [ 3.807511] initrd-nixos-activation-start[178]: running activation script... buildbot # [ 4.261829] initrd-nixos-activation-start[201]: setting up /etc... buildbot # [ 4.536098] systemd[1]: initrd-nixos-activation.service: Deactivated successfully. buildbot # [ 4.537665] systemd[1]: Finished NixOS Activation. buildbot # [ 4.539662] systemd[1]: Starting Switch Root... buildbot # [ 4.552471] systemd[1]: Switching root. buildbot # [ 4.707714] systemd-journald[67]: Received SIGTERM from PID 1 (systemd). buildbot # [ 4.875931] NET: Registered PF_VSOCK protocol family buildbot # [ 5.266019] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE) buildbot # [ 5.276236] systemd[1]: Detected virtualization kvm. buildbot # [ 5.278206] systemd[1]: Detected architecture x86-64. buildbot # [ 5.280208] systemd[1]: Detected first boot. buildbot # [ 5.288748] systemd[1]: Initializing machine ID from random generator. buildbot # [ 5.556469] systemd[1]: bpf-restrict-fs: LSM BPF program attached buildbot # [ 5.682444] systemd[1]: Applying preset policy. buildbot # [ 6.153057] systemd[1]: Populated /etc with preset unit settings. buildbot # [ 6.580366] systemd[1]: initrd-switch-root.service: Deactivated successfully. buildbot # [ 6.581720] systemd[1]: Stopped initrd-switch-root.service. buildbot # [ 6.584311] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. buildbot # [ 6.586292] systemd[1]: Created slice Slice /system/getty. buildbot # [ 6.587586] systemd[1]: Created slice User and Session Slice. buildbot # [ 6.588501] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. buildbot # [ 6.589773] systemd[1]: Started Forward Password Requests to Wall Directory Watch. buildbot # [ 6.590834] systemd[1]: Expecting device /dev/hvc0... buildbot # [ 6.591529] systemd[1]: Expecting device /dev/ttyS0... buildbot # [ 6.592306] systemd[1]: Reached target Local Encrypted Volumes. buildbot # [ 6.593195] systemd[1]: Stopped target initrd-fs.target. buildbot # [ 6.594025] systemd[1]: Stopped target initrd-root-fs.target. buildbot # [ 6.594798] systemd[1]: Stopped target initrd-switch-root.target. buildbot # [ 6.595642] systemd[1]: Reached target Virtual Machines and Containers. buildbot # [ 6.596529] systemd[1]: Reached target Path Units. buildbot # [ 6.597281] systemd[1]: Reached target Remote File Systems. buildbot # [ 6.598082] systemd[1]: Reached target Slice Units. buildbot # [ 6.598795] systemd[1]: Reached target Swaps. buildbot # [ 6.601554] systemd[1]: Listening on Query the User Interactively for a Password. buildbot # [ 6.605291] systemd[1]: Listening on Process Core Dump Socket. buildbot # [ 6.608068] systemd[1]: Listening on Credential Encryption/Decryption. buildbot # [ 6.610918] systemd[1]: Listening on Factory Reset Management. buildbot # [ 6.614364] systemd[1]: Starting Journal Log Access Socket... buildbot # [ 6.615923] systemd[1]: Listening on Journal Audit Socket. buildbot # [ 6.618840] systemd[1]: Listening on Console Output Muting Service Socket. buildbot # [ 6.620070] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket. buildbot # [ 6.621447] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.622751] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.631742] systemd[1]: Listening on Disk Repartitioning Service Socket. buildbot # [ 6.632811] systemd[1]: Listening on udev Control Socket. buildbot # [ 6.633667] systemd[1]: Listening on udev Varlink Socket. buildbot # [ 6.638333] systemd[1]: Mounting Huge Pages File System... buildbot # [ 6.641455] systemd[1]: Mounting POSIX Message Queue File System... buildbot # [ 6.644789] systemd[1]: Mounting Kernel Debug File System... buildbot # [ 6.653835] systemd[1]: Mounting Kernel Trace File System... buildbot # [ 6.660021] systemd[1]: Starting Create List of Static Device Nodes... buildbot # [ 6.662238] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio buildbot # [ 6.672792] systemd[1]: Starting Load Kernel Module configfs... buildbot # [ 6.673615] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm buildbot # [ 6.675546] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 6.677276] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse buildbot # [ 6.682166] systemd[1]: Mounting FUSE Control File System... buildbot # [ 6.685258] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 6.727104] systemd[1]: Starting Journal Service... buildbot # [ 6.745254] systemd[1]: Starting Load Kernel Modules... buildbot # [ 6.766709] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer... buildbot # [ 6.772069] systemd[1]: Starting Remount Root and Kernel File Systems... buildbot # [ 6.775047] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.790049] systemd[1]: Starting Coldplug All udev Devices... buildbot # [ 6.805360] systemd[1]: Listening on Journal Log Access Socket. buildbot # [ 6.809247] systemd[1]: Mounted Huge Pages File System. buildbot # [ 6.813613] systemd[1]: Mounted POSIX Message Queue File System. buildbot # [ 6.818400] systemd[1]: Mounted Kernel Debug File System. buildbot # [ 6.822859] systemd[1]: Mounted Kernel Trace File System. buildbot # [ 6.829545] systemd[1]: Finished Create List of Static Device Nodes. buildbot # [ 6.832885] systemd-journald[270]: Collecting audit messages is enabled. buildbot # [ 6.836650] systemd[1]: modprobe@configfs.service: Deactivated successfully. buildbot # [ 6.837760] loop: module loaded buildbot # [ 6.842806] systemd[1]: Finished Load Kernel Module configfs. buildbot # [ 6.848754] EXT4-fs (vda): re-mounted 8698d6f9-ab2c-4233-ba2b-27a182c107cd. buildbot # [ 6.850375] systemd[1]: Mounted FUSE Control File System. buildbot # [ 6.867040] systemd[1]: Mounting Kernel Configuration File System... buildbot # [ 6.730121] systemd[1]: Queued start job for default target Multi-User System. buildbot # [ 6.731367] systemd[1]: systemd-journald.service: Deactivated successfully. buildbot # [ 6.733797] systemd-modules-load[271]: Inserted module 'loop' buildbot # [ 6.879802] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... buildbot # [ 6.886101] systemd[1]: Started Journal Service. buildbot # [ 6.748198] systemd-modules-load[271]: Inserted module 'tls' buildbot # [ 6.770252] systemd[1]: Finished Load Kernel Modules. buildbot # [ 6.774582] systemd[1]: Finished Remount Root and Kernel File Systems. buildbot # [ 6.790735] systemd-oomd[272]: No swap; memory pressure usage will be degraded buildbot # [ 6.803990] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer. buildbot # [ 6.806626] systemd[1]: Listening on Disk Image Download Service Socket. buildbot # [ 6.812138] systemd[1]: Starting Flush Journal to Persistent Storage... buildbot # [ 6.813091] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 6.820418] systemd[1]: Starting Load/Save OS Random Seed... buildbot # [ 6.828368] systemd[1]: Starting Apply Kernel Variables... buildbot # [ 6.830827] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 6.845445] systemd[1]: Mounted Kernel Configuration File System. buildbot # [ 7.024061] systemd-journald[270]: Received client request to flush runtime journal. buildbot # [ 6.979924] systemd[1]: Finished Create Static Device Nodes in /dev gracefully. buildbot # [ 6.983488] systemd[1]: Starting Create Static Device Nodes in /dev... buildbot # [ 6.985221] systemd[1]: Finished Load/Save OS Random Seed. buildbot # [ 6.986827] systemd[1]: Reached target First Boot Complete. buildbot # [ 6.987741] systemd[1]: Finished Apply Kernel Variables. buildbot # [ 6.989525] systemd[1]: Finished Flush Journal to Persistent Storage. buildbot # [ 7.014160] systemd[1]: Finished Create Static Device Nodes in /dev. buildbot # [ 7.015059] systemd[1]: Reached target Preparation for Local File Systems. buildbot # [ 7.019321] systemd[1]: Starting Rule-based Manager for Device Events and Files... buildbot # [ 7.086860] systemd[1]: Finished Coldplug All udev Devices. buildbot # [ 7.099854] systemd-udevd[301]: Using default interface naming scheme 'v260'. buildbot # [ 7.189522] systemd[1]: Started Rule-based Manager for Device Events and Files. buildbot # [ 7.280922] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse buildbot # [ 7.331226] systemd[1]: Condition check resulted in /dev/hvc0 being skipped. buildbot # [ 7.341555] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped. buildbot # [ 7.389310] (udev-worker)[310]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name. buildbot # [ 7.393778] (udev-worker)[310]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 7.396437] (udev-worker)[311]: Network interface NamePolicy= disabled on kernel command line. buildbot # [ 7.447156] systemd[1]: Mounting /run/wrappers... buildbot # [ 7.485951] systemd[1]: Mounted /run/wrappers. buildbot # [ 7.487051] systemd[1]: Reached target Local File Systems. buildbot # [ 7.491370] systemd[1]: Listening on Boot Loader Control Service Socket. buildbot # [ 7.495078] systemd[1]: Starting register-nix-paths.service... buildbot # [ 7.498212] systemd[1]: Starting Create SUID/SGID Wrappers... buildbot # [ 7.500433] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 7.504632] systemd[1]: Starting Save Transient machine-id to Disk... buildbot # [ 7.512276] systemd[1]: Starting Create System Files and Directories... buildbot # [ 7.541062] systemd[1]: Condition check resulted in Virtio network device being skipped. buildbot # [ 7.547344] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore buildbot # [ 7.548776] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met. buildbot # [ 7.550515] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67 buildbot # [ 7.553404] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore buildbot # [ 7.556151] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.558577] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki buildbot # [ 7.609446] systemd[1]: etc-machine\x2did.mount: Deactivated successfully. buildbot # [ 7.615764] systemd[1]: Finished Save Transient machine-id to Disk. buildbot # [ 7.671994] systemd[1]: Finished Create System Files and Directories. buildbot # [ 7.680366] systemd[1]: Starting Rebuild Journal Catalog... buildbot # [ 7.687081] systemd[1]: Starting Record System Boot/Shutdown in UTMP... buildbot # [ 7.866098] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 buildbot # [ 7.761677] systemd[1]: Finished Record System Boot/Shutdown in UTMP. buildbot # [ 7.910611] mousedev: PS/2 mouse device common for all mice buildbot # [ 7.929430] ACPI: button: Power Button [PWRF] buildbot # [ 7.810579] systemd[1]: Finished Rebuild Journal Catalog. buildbot # [ 7.820376] systemd[1]: Starting Update is Completed... buildbot # [ 7.994180] rtc_cmos 00:05: RTC can wake from S4 buildbot # [ 7.871744] systemd[1]: Finished Update is Completed. buildbot # [ 8.042002] rtc_cmos 00:05: registered as rtc0 buildbot # [ 8.058242] parport_pc 00:03: reported by Plug and Play ACPI buildbot # [ 8.060490] rtc_cmos 00:05: setting system clock to 2026-10-18T06:54:29 UTC (1792306469) buildbot # [ 8.062197] systemd-journald[270]: Time jumped backwards, rotating. buildbot # [ 8.069657] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs buildbot # [ 8.078107] Floppy drive(s): fd0 is 2.88M AMI BIOS buildbot # [ 8.100539] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] buildbot # [ 8.112372] FDC 0 is a S82078B buildbot # [ 8.178518] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console buildbot # [ 8.119770] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully. buildbot # [ 8.122821] systemd[1]: Finished Create SUID/SGID Wrappers. buildbot # [ 8.199342] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4 buildbot # [ 8.205455] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 buildbot # [ 8.205513] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD buildbot # [ 8.287256] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6 buildbot # [ 8.287516] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5 buildbot # [ 8.325179] Console: switching to colour dummy device 80x25 buildbot # [ 8.382220] [drm] Found bochs VGA, ID 0xb0c5. buildbot # [ 8.382223] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000. buildbot # [ 8.396154] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic buildbot # [ 8.396942] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0 buildbot # [ 8.260353] systemd[1]: Starting Virtual Console Setup... buildbot # [ 8.448487] systemd[1]: Finished register-nix-paths.service. buildbot # [ 8.487143] fbcon: bochs-drmdrmfb (fb0) is primary device buildbot # [ 8.501718] ppdev: user-space parallel port driver buildbot # [ 8.592186] Console: switching to colour frame buffer device 160x50 buildbot # [ 8.619662] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device buildbot # [ 8.484633] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully. buildbot # [ 8.486942] systemd[1]: Stopped Virtual Console Setup. buildbot # [ 8.493299] systemd[1]: Starting Virtual Console Setup... buildbot # [ 8.711650] kvm_amd: TSC scaling supported buildbot # [ 8.712201] kvm_amd: Nested Virtualization enabled buildbot # [ 8.713030] kvm_amd: Nested Paging enabled buildbot # [ 8.713435] kvm_amd: LBR virtualization supported buildbot # [ 8.714123] kvm_amd: Virtual VMLOAD VMSAVE supported buildbot # [ 8.714648] kvm_amd: Virtual GIF supported buildbot # [ 8.715289] kvm_amd: Virtual NMI enabled buildbot # [ 8.756827] EDAC MC: Ver: 3.0.0 buildbot # [ 8.889528] systemd-vconsole-setup[403]: Configuration of first virtual console was skipped, ignoring remaining ones. buildbot # [ 8.893828] systemd[1]: Finished Virtual Console Setup. buildbot # [ 8.895549] systemd[1]: Reached target System Initialization. buildbot # [ 8.897195] systemd[1]: Started Discard unused filesystem blocks once a week. buildbot # [ 8.898522] systemd[1]: Started Daily Cleanup of Temporary Directories. buildbot # [ 8.899865] systemd[1]: Reached target Timer Units. buildbot # [ 8.900715] systemd[1]: Listening on D-Bus System Message Bus Socket. buildbot # [ 8.901719] systemd[1]: Listening on Nix Daemon Socket. buildbot # [ 8.903689] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local). buildbot # [ 8.905153] systemd[1]: Listening on Hostname Service Socket. buildbot # [ 8.906900] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket. buildbot # [ 8.908103] systemd[1]: Reached target Socket Units. buildbot # [ 8.908830] systemd[1]: Reached target Basic System. buildbot # [ 8.910874] systemd[1]: Started backdoor.service. buildbot # [ 8.913728] systemd[1]: Starting Import lastlog data into lastlog2 database... buildbot # [ 8.917133] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 8.921885] systemd[1]: Starting Post-Boot Actions... buildbot # [ 8.929380] systemd[1]: Started Reset console on configuration changes. buildbot # [ 8.940151] systemd[1]: Starting resolvconf update... buildbot # [ 8.941154] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met. buildbot # [ 8.969161] systemd[1]: Starting D-Bus System Message Bus... buildbot # [ 8.996533] systemd[1]: Finished Post-Boot Actions. buildbot # connecting to host... buildbot # [ 9.017711] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.018678] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.021026] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.024165] nsncd[409]: Oct 18 06:54:30.592 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot: Guest shell says: b'Spawning backdoor root shell...\n' buildbot: connected to guest root shell buildbot # [ 9.036516] systemd[1]: Starting User Login Management... buildbot: (connecting took 9.75 seconds) buildbot: (finished: waiting for the VM to finish booting, in 9.99 seconds) buildbot # [ 9.060431] systemd[1]: Finished Import lastlog data into lastlog2 database. buildbot # [ 9.133556] dbus-broker-launch[414]: Looking up NSS user entry for 'systemd-timesync'... buildbot # [ 9.153394] dbus-broker-launch[414]: NSS returned no entry for 'systemd-timesync' buildbot # [ 9.155771] dbus-broker-launch[414]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync" buildbot # [ 9.158257] systemd[1]: Stopped target Host and Network Name Lookups. buildbot # [ 9.160197] systemd[1]: Stopping Host and Network Name Lookups... buildbot # [ 9.162198] systemd[1]: Stopped target User and Group Name Lookups. buildbot # [ 9.163730] systemd[1]: Stopping User and Group Name Lookups... buildbot # [ 9.165235] systemd[1]: Stopping Name Service Cache Daemon (nsncd)... buildbot # [ 9.169228] systemd[1]: nscd.service: Deactivated successfully. buildbot # [ 9.171800] systemd[1]: Stopped Name Service Cache Daemon (nsncd). buildbot # [ 9.189533] systemd-logind[434]: New seat seat0. buildbot # [ 9.197776] systemd-logind[434]: Watching system buttons on /dev/input/event2 (Power Button) buildbot # [ 9.200412] systemd-logind[434]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard) buildbot # [ 9.202522] systemd-logind[434]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard) buildbot # [ 9.205069] systemd[1]: Starting Name Service Cache Daemon (nsncd)... buildbot # [ 9.205925] systemd[1]: Started User Login Management. buildbot # [ 9.218687] systemd[1]: Starting linger-users.service... buildbot # [ 9.219547] systemd[1]: Started D-Bus System Message Bus. buildbot # [ 9.255430] dbus-broker-launch[414]: Ready buildbot # [ 9.286229] systemd[1]: Finished resolvconf update. buildbot # [ 9.289457] systemd[1]: Reached target Preparation for Network. buildbot # [ 9.293684] nsncd[486]: Oct 18 06:54:30.871 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket" buildbot # [ 9.297109] systemd[1]: Starting DHCP Client... buildbot # [ 9.300071] systemd[1]: Starting Address configuration of eth1... buildbot # [ 9.303688] systemd[1]: Starting Extra networking commands.... buildbot # [ 9.306405] systemd[1]: Started Name Service Cache Daemon (nsncd). buildbot # [ 9.307256] systemd[1]: linger-users.service: Deactivated successfully. buildbot # [ 9.309553] systemd[1]: Finished linger-users.service. buildbot # [ 9.316555] systemd[1]: Reached target Host and Network Name Lookups. buildbot # [ 9.318584] systemd[1]: Reached target User and Group Name Lookups. buildbot # [ 9.401734] network-addresses-eth1-start[512]: adding address 192.168.1.1/24... done buildbot # [ 9.417393] network-addresses-eth1-start[512]: adding address 2001:db8:1::1/64... done buildbot # [ 9.438668] systemd[1]: Finished Address configuration of eth1. buildbot # [ 9.462379] dhcpcd[522]: dhcpcd-10.3.2 starting buildbot # [ 9.470490] systemd[1]: Finished Extra networking commands.. buildbot # [ 9.472436] systemd[1]: Reached target Network. buildbot # [ 9.474311] dhcpcd[569]: dev: loaded udev buildbot # [ 9.478397] systemd[1]: Starting Nginx Web Server... buildbot # [ 9.484538] systemd[1]: Starting PostgreSQL Server... buildbot # [ 9.488828] systemd[1]: Starting SSH Daemon... buildbot # [ 9.633489] 8021q: 802.1Q VLAN Support v1.8 buildbot # [ 9.636714] 8021q: adding VLAN 0 to HW filter on device eth1 buildbot # [ 9.501570] systemd[1]: Starting Permit User Sessions... buildbot # [ 9.546378] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. buildbot # [ 9.582270] systemd[1]: Finished Permit User Sessions. buildbot # [ 9.591383] systemd[1]: Started Getty on tty1. buildbot # [ 9.595402] systemd[1]: Reached target Login Prompts. buildbot # [ 9.632587] sshd[575]: Server listening on 0.0.0.0 port 22. buildbot # [ 9.635167] sshd[575]: Server listening on :: port 22. buildbot # [ 9.635915] systemd[1]: Started SSH Daemon. buildbot # [ 9.641323] systemd[1]: Starting Setup git test repository with scheduled effects... buildbot # [ 9.822534] cfg80211: Loading compiled-in X.509 certificates for regulatory database buildbot # [ 9.857770] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' buildbot # [ 9.858470] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' buildbot # [ 9.863097] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2 buildbot # [ 9.864034] cfg80211: failed to load regulatory.db buildbot # [ 9.785316] setup-git-repo-start[594]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 9.786739] setup-git-repo-start[594]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 9.787981] setup-git-repo-start[594]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 9.790331] setup-git-repo-start[594]: hint: call: buildbot # [ 9.790976] setup-git-repo-start[594]: hint: buildbot # [ 9.792367] setup-git-repo-start[594]: hint: git config --global init.defaultBranch buildbot # [ 9.794237] setup-git-repo-start[594]: hint: buildbot # [ 9.795638] setup-git-repo-start[594]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 9.797588] setup-git-repo-start[594]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 9.798837] setup-git-repo-start[594]: hint: buildbot # [ 9.799438] setup-git-repo-start[594]: hint: git branch -m buildbot # [ 9.800263] setup-git-repo-start[594]: hint: buildbot # [ 9.800838] setup-git-repo-start[594]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 9.802166] setup-git-repo-start[594]: Initialized empty Git repository in /srv/repos/test-flake.git/ buildbot # [ 9.951336] 8021q: adding VLAN 0 to HW filter on device eth0 buildbot # [ 9.815900] dhcpcd[569]: eth0: waiting for carrier buildbot # [ 9.817509] dhcpcd[569]: eth0: carrier acquired buildbot # [ 9.835264] dhcpcd[569]: DUID 00:01:00:01:32:67:29:a7:52:54:00:12:34:56 buildbot # [ 9.836423] dhcpcd[569]: eth0: IAID 00:12:34:56 buildbot # [ 9.838445] dhcpcd[569]: eth0: adding address fe80::5054:ff:fe12:3456 buildbot # [ 9.849696] postgresql-pre-start[590]: The files belonging to this database system will be owned by user "postgres". buildbot # [ 9.851542] postgresql-pre-start[590]: This user must also own the server process. buildbot # [ 9.861149] nginx-pre-start[586]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok buildbot # [ 9.863480] postgresql-pre-start[590]: The database cluster will be initialized with locale "en_US.UTF-8". buildbot # [ 9.864673] postgresql-pre-start[590]: The default database encoding has accordingly been set to "UTF8". buildbot # [ 9.865797] postgresql-pre-start[590]: The default text search configuration will be set to "english". buildbot # [ 9.867077] postgresql-pre-start[590]: Data page checksums are disabled. buildbot # [ 9.869514] postgresql-pre-start[590]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok buildbot # [ 9.871319] postgresql-pre-start[590]: creating subdirectories ... ok buildbot # [ 9.872250] postgresql-pre-start[590]: selecting dynamic shared memory implementation ... posix buildbot # [ 9.873438] nginx-pre-start[586]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful buildbot # [ 9.875587] setup-git-repo-start[608]: hint: Using 'master' as the name for the initial branch. This default branch name buildbot # [ 9.877393] setup-git-repo-start[608]: hint: will change to "main" in Git 3.0. To configure the initial branch name buildbot # [ 9.879113] setup-git-repo-start[608]: hint: to use in all of your new repositories, which will suppress this warning, buildbot # [ 9.880494] setup-git-repo-start[608]: hint: call: buildbot # [ 9.882979] setup-git-repo-start[608]: hint: buildbot # [ 9.884155] setup-git-repo-start[608]: hint: git config --global init.defaultBranch buildbot # [ 9.886161] setup-git-repo-start[608]: hint: buildbot # [ 9.886731] setup-git-repo-start[608]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and buildbot # [ 9.887942] setup-git-repo-start[608]: hint: 'development'. The just-created branch can be renamed via this command: buildbot # [ 9.890168] setup-git-repo-start[608]: hint: buildbot # [ 9.890834] setup-git-repo-start[608]: hint: git branch -m buildbot # [ 9.891721] setup-git-repo-start[608]: hint: buildbot # [ 9.892667] setup-git-repo-start[608]: hint: Disable this message with "git config set advice.defaultBranchName false" buildbot # [ 9.894189] setup-git-repo-start[608]: Initialized empty Git repository in /tmp/test-flake/.git/ buildbot # [ 9.896557] systemd[1]: Started Nginx Web Server. buildbot # [ 9.967862] setup-git-repo-start[619]: [master (root-commit) 7242469] Initial commit with scheduled effects buildbot # [ 9.969313] setup-git-repo-start[619]: 3 files changed, 131 insertions(+) buildbot # [ 9.970452] setup-git-repo-start[619]: create mode 100644 effects-lib.nix buildbot # [ 9.971499] setup-git-repo-start[619]: create mode 100644 flake.lock buildbot # [ 9.973115] setup-git-repo-start[619]: create mode 100644 flake.nix buildbot # [ 10.002225] postgresql-pre-start[590]: selecting default "max_connections" ... 100 buildbot # [ 10.060141] setup-git-repo-start[623]: To /srv/repos/test-flake.git buildbot # [ 10.060965] setup-git-repo-start[623]: * [new branch] master -> master buildbot # [ 10.063612] setup-git-repo-start[623]: branch 'master' set up to track 'origin/master'. buildbot # [ 10.068167] systemd[1]: Finished Setup git test repository with scheduled effects. buildbot # [ 10.075446] postgresql-pre-start[590]: selecting default "shared_buffers" ... 128MB buildbot: (finished: waiting for unit sshd.service, in 11.26 seconds) buildbot: waiting for unit setup-git-repo.service buildbot: (finished: waiting for unit setup-git-repo.service, in 0.06 seconds) buildbot: waiting for unit multi-user.target buildbot # [ 10.794678] dhcpcd[569]: eth0: soliciting a DHCP lease buildbot # [ 10.948037] NET: Registered PF_PACKET protocol family buildbot # [ 10.813498] dhcpcd[569]: eth0: offered 10.0.2.15 from 10.0.2.2 buildbot # [ 10.816151] dhcpcd[569]: eth0: probing address 10.0.2.15/24 buildbot # [ 11.559543] dhcpcd[569]: eth0: soliciting an IPv6 router buildbot # [ 11.561112] dhcpcd[569]: eth0: Router Advertisement from fe80::2 buildbot # [ 11.561885] dhcpcd[569]: eth0: adding address fec0::5054:ff:fe12:3456/64 buildbot # [ 11.562836] dhcpcd[569]: eth0: adding route to fec0::/64 buildbot # [ 11.563898] dhcpcd[569]: eth0: adding default route via fe80::2 buildbot # [ 11.844486] postgresql-pre-start[590]: selecting default time zone ... UTC buildbot # [ 11.848436] postgresql-pre-start[590]: creating configuration files ... ok buildbot # [ 12.052596] postgresql-pre-start[590]: running bootstrap script ... ok buildbot # [ 12.574092] postgresql-pre-start[590]: performing post-bootstrap initialization ... ok buildbot # [ 12.724441] postgresql-pre-start[590]: syncing data to disk ... ok buildbot # [ 12.726126] postgresql-pre-start[590]: initdb: warning: enabling "trust" authentication for local connections buildbot # [ 12.727340] postgresql-pre-start[590]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb. buildbot # [ 12.729110] postgresql-pre-start[590]: Success. You can now start the database server using: buildbot # [ 12.730110] postgresql-pre-start[590]: pg_ctl -D /var/lib/postgresql/17 -l logfile start buildbot # [ 12.823225] postgres[682]: [682] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit buildbot # [ 12.833962] postgres[682]: [682] LOG: listening on IPv6 address "::1", port 5432 buildbot # [ 12.834967] postgres[682]: [682] LOG: listening on IPv4 address "127.0.0.1", port 5432 buildbot # [ 12.837527] postgres[682]: [682] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432" buildbot # [ 12.848512] postgres[688]: [688] LOG: database system was shut down at 2026-10-18 06:54:34 GMT buildbot # [ 12.854294] postgres[682]: [682] LOG: database system is ready to accept connections buildbot # [ 12.860626] systemd[1]: Started PostgreSQL Server. buildbot # [ 12.864689] systemd[1]: Starting PostgreSQL Setup Scripts... buildbot # [ 13.019613] postgresql-setup-start[699]: CREATE DATABASE buildbot # [ 13.057382] postgresql-setup-start[704]: CREATE ROLE buildbot # [ 13.074798] postgresql-setup-start[706]: ALTER DATABASE buildbot # [ 13.079751] systemd[1]: Finished PostgreSQL Setup Scripts. buildbot # [ 13.081710] systemd[1]: Reached target PostgreSQL. buildbot # [ 13.084820] systemd[1]: Starting Buildbot Continuous Integration Server.... buildbot # [ 13.126416] buildbot-master-pre-start[711]: mkdir: created directory '/var/lib/buildbot/master' buildbot # [ 16.274787] dhcpcd[569]: eth0: leased 10.0.2.15 for 86400 seconds buildbot # [ 16.276190] dhcpcd[569]: eth0: adding route to 10.0.2.0/24 buildbot # [ 16.277429] dhcpcd[569]: eth0: adding default route via 10.0.2.2 buildbot # [ 16.380727] systemd[1]: Started DHCP Client. buildbot # [ 18.803507] buildbot-master-pre-start[713]: updating existing installation buildbot # [ 18.804648] buildbot-master-pre-start[713]: not touching existing buildbot.tac buildbot # [ 18.807105] buildbot-master-pre-start[713]: creating buildbot.tac.new instead buildbot # [ 18.807950] buildbot-master-pre-start[713]: creating /var/lib/buildbot/master/master.cfg.sample buildbot # [ 18.809038] buildbot-master-pre-start[713]: creating database (postgresql://@/buildbot) buildbot # [ 18.809985] buildbot-master-pre-start[713]: buildmaster configured in /var/lib/buildbot/master buildbot # [ 18.985868] systemd[1]: Started Buildbot Continuous Integration Server.. buildbot # [ 18.990518] systemd[1]: Started Buildbot Worker.. buildbot # [ 18.991774] systemd[1]: Reached target Multi-User System. buildbot # [ 18.992733] systemd[1]: Startup finished in 803ms (kernel) + 3.869s (initrd) + 14.320s (userspace) = 18.992s. buildbot: (finished: waiting for unit multi-user.target, in 8.74 seconds) subtest: Master and worker services start buildbot: waiting for unit buildbot-master.service buildbot: (finished: waiting for unit buildbot-master.service, in 0.08 seconds) buildbot: waiting for unit buildbot-worker.service buildbot: (finished: waiting for unit buildbot-worker.service, in 0.08 seconds) buildbot: waiting for TCP port 8010 on localhost buildbot # [ 20.417209] twistd[817]: Starting worker local-worker-000 buildbot # [ 20.418316] twistd[817]: 2026-10-18T06:54:41+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py... buildbot # [ 20.420392] twistd[817]: 2026-10-18T06:54:41+0000 [-] Loaded. buildbot # [ 20.421524] twistd[817]: 2026-10-18T06:54:41+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 20.423668] twistd[817]: 2026-10-18T06:54:41+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 20.425502] twistd[817]: 2026-10-18T06:54:41+0000 [-] Starting Worker -- version: 2026.06.26 buildbot # [ 20.427110] twistd[817]: 2026-10-18T06:54:41+0000 [-] recording hostname in twistd.hostname buildbot # [ 20.428122] twistd[817]: 2026-10-18T06:54:41+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 20.438241] twistd[817]: 2026-10-18T06:54:42+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect in 2.2815721658834347 seconds. buildbot # [ 20.440827] twistd[817]: 2026-10-18T06:54:42+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 22.335854] twistd[816]: 2026-10-18T06:54:41+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac... buildbot # [ 22.337067] twistd[816]: 2026-10-18T06:54:43+0000 [-] Loaded. buildbot # [ 22.337783] twistd[816]: 2026-10-18T06:54:43+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up. buildbot # [ 22.339775] twistd[816]: 2026-10-18T06:54:43+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor. buildbot # [ 22.341516] twistd[816]: 2026-10-18T06:54:43+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0 buildbot # [ 22.352446] twistd[816]: 2026-10-18T06:54:43+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg' buildbot # [ 22.725975] twistd[817]: 2026-10-18T06:54:44+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 22.730116] twistd[817]: 2026-10-18T06:54:44+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect in 2.4138996399635007 seconds. buildbot # [ 22.732513] twistd[817]: 2026-10-18T06:54:44+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory buildbot # [ 23.293963] twistd[816]: 2026-10-18T06:54:44+0000 [-] Setting up database with URL 'postgresql://@/buildbot' buildbot # [ 23.394034] twistd[816]: 2026-10-18T06:54:44+0000 [-] adding 9 new builders, removing 0 buildbot # [ 23.506092] twistd[816]: 2026-10-18T06:54:45+0000 [-] adding 3 new services, removing 0 buildbot # [ 23.638737] twistd[816]: 2026-10-18T06:54:45+0000 [-] adding 1 new change_sources, removing 0 buildbot # [ 23.644702] twistd[816]: 2026-10-18T06:54:45+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 23.653262] twistd[816]: 2026-10-18T06:54:45+0000 [-] adding 14 new schedulers, removing 0 buildbot # [ 23.801227] twistd[816]: 2026-10-18T06:54:45+0000 [-] BuildbotSite starting on 8010 buildbot # [ 23.802758] twistd[816]: 2026-10-18T06:54:45+0000 [buildbot.www.service.BuildbotSite#info] Starting factory buildbot # [ 23.804989] twistd[816]: 2026-10-18T06:54:45+0000 [-] adding 5 new workers, removing 0 buildbot # [ 23.819063] twistd[816]: 2026-10-18T06:54:45+0000 [-] PBServerFactory starting on 9989 buildbot # [ 23.820136] twistd[816]: 2026-10-18T06:54:45+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory buildbot # [ 23.849792] twistd[816]: 2026-10-18T06:54:45+0000 [-] Starting Worker -- version: 2026.06.26 buildbot # [ 23.850869] twistd[816]: 2026-10-18T06:54:45+0000 [-] recording hostname in twistd.hostname buildbot # [ 23.851859] twistd[816]: 2026-10-18T06:54:45+0000 [-] message from master: attached buildbot # [ 23.854057] twistd[816]: 2026-10-18T06:54:45+0000 [-] Got workerinfo from '__Janitor' buildbot # [ 23.860212] twistd[816]: 2026-10-18T06:54:45+0000 [-] bot attached buildbot # [ 23.861477] twistd[816]: 2026-10-18T06:54:45+0000 [-] Worker __Janitor attached to __Janitor buildbot # [ 23.862635] twistd[816]: 2026-10-18T06:54:45+0000 [-] message from master: attached buildbot # [ 23.896751] twistd[816]: 2026-10-18T06:54:45+0000 [-] BuildMaster is running buildbot # [ 23.938654] sshd-session[881]: Accepted publickey for root from ::1 port 57602 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 23.951132] sshd-session[881]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 23.981627] systemd[1]: Created slice Slice /user/0. buildbot # [ 23.984777] systemd[1]: Starting User Runtime Directory /run/user/0... buildbot # [ 23.994398] systemd-logind[434]: New session '1' of user 'root' with class 'user' and type 'tty'. buildbot # [ 24.025539] systemd[1]: Finished User Runtime Directory /run/user/0. buildbot # [ 24.033166] systemd[1]: Starting User Manager for UID 0... buildbot # [ 24.067393] (systemd)[886]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 24.072863] systemd-logind[434]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'. buildbot # [ 24.357386] systemd[886]: Queued start job for default target Main User Target. buildbot # [ 24.359996] systemd[886]: Created slice User Application Slice. buildbot # [ 24.361238] systemd[886]: Started Daily Cleanup of User's Temporary Directories. buildbot # [ 24.362327] systemd[886]: Reached target Paths. buildbot # [ 24.362944] systemd[886]: Reached target Timers. buildbot # [ 24.365963] systemd[886]: Starting D-Bus User Message Bus Socket... buildbot # [ 24.368120] systemd[886]: Starting Create User Files and Directories... buildbot # [ 24.426964] systemd[886]: Finished Create User Files and Directories. buildbot # [ 24.474064] systemd[886]: Listening on D-Bus User Message Bus Socket. buildbot # [ 24.474954] systemd[886]: Reached target Sockets. buildbot # [ 24.475648] systemd[886]: Reached target Basic System. buildbot # [ 24.476357] systemd[886]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system buildbot # [ 24.477593] systemd[886]: Reached target Main User Target. buildbot # [ 24.478354] systemd[886]: Startup finished in 380ms. buildbot # [ 24.480155] systemd[1]: Started User Manager for UID 0. buildbot # [ 24.483368] systemd[1]: Started Session 1 of User root. buildbot # [ 24.520535] sshd-session[899]: Received disconnect from ::1 port 57602:11: disconnected by user buildbot # [ 24.521741] sshd-session[899]: Disconnected from user root ::1 port 57602 buildbot # [ 24.522874] sshd-session[881]: pam_unix(sshd:session): session closed for user root buildbot # [ 24.532795] systemd[1]: session-1.scope: Deactivated successfully. buildbot # [ 24.535411] systemd-logind[434]: Session 1 logged out. Waiting for processes to exit. buildbot # [ 24.538078] systemd-logind[434]: Removed session 1. buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded! buildbot: (finished: waiting for TCP port 8010 on localhost, in 5.38 seconds) buildbot: waiting for success: curl --fail --head http://localhost:8010 buildbot # [ 24.710870] sshd-session[904]: Accepted publickey for root from ::1 port 57616 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # % Total % Received % Xferd Average Speed Time Time Time [ 24.725416] sshd-session[904]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 [ 24.741594] systemd-logind[434]: New session '3' of user 'root' with class 'user' and type 'tty'. buildbot # [ 24.742731] systemd[1]: Started Session 3 of User root. buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.13 seconds) (finished: subtest: Master and worker services start, in 5.67 seconds) subtest: Project is registered buildbot: waiting for success: curl http://localhost:8010/api/v2/projects buildbot # [ 24.803451] sshd-session[915]: Received disconnect from ::1 port 57616:11: disconnected by user buildbot # [ 24.804639] sshd-session[915]: Disconnected from user root ::1 port 57616 buildbot # [ 24.805886] sshd-session[904]: pam_unix(sshd:session): session closed for user root buildbot # [ 24.811926] systemd[1]: session-3.scope: Deactivated successfully. buildbot # [ 24.815073] systemd-logind[434]: Session 3 logged out. Waiting for processes to exit. buildbot # [ 24.817290] systemd-logind[434]: Removed session 3. buildbot # [ 24.844084] twistd[816]: 2026-10-18T06:54:46+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 9025 0 0100 266 100 266 0 0 7728 0 0100 266 100 266 0 0 6821 0 0 buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.12 seconds) (finished: subtest: Project is registered, in 0.12 seconds) subtest: CLI list-schedules works buildbot: must succeed: cd /tmp/test-flake buildbot-effects list-schedules buildbot # [ 25.146872] twistd[817]: 2026-10-18T06:54:46+0000 [buildbot_worker.pb.BotFactory#info] Starting factory buildbot # [ 25.154770] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=32858) buildbot # [ 25.157593] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.163262] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000' buildbot # [ 25.172175] twistd[816]: 2026-10-18T06:54:46+0000 [-] bot attached buildbot # [ 25.178058] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval buildbot # [ 25.179506] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build buildbot # [ 25.180812] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed buildbot # [ 25.182240] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval buildbot # [ 25.183566] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure buildbot # [ 25.184926] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect buildbot # [ 25.186318] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect buildbot # [ 25.187602] twistd[816]: 2026-10-18T06:54:46+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot buildbot # [ 25.191497] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.192552] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.193555] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.194563] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.195554] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.196553] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.197568] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.198606] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] message from master: attached buildbot # [ 25.213210] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] Connected to buildmaster; worker is ready buildbot # [ 25.214428] twistd[817]: 2026-10-18T06:54:46+0000 [Broker,client] sending application-level keepalives every 600 seconds buildbot: (finished: must succeed: cd /tmp/test-flake buildbot-effects list-schedules , in 0.54 seconds) (finished: subtest: CLI list-schedules works, in 0.54 seconds) subtest: Push a new commit to trigger build buildbot: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master buildbot # Enumerating objects: 5, done. buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done. buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done. buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 297 bytes | 297.00 KiB/s, done. buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0) buildbot # To /srv/repos/test-flake.git buildbot # 7242469..dcee440 master -> master buildbot: (finished: must succeed: cd /tmp/test-flake echo "# trigger rebuild" >> flake.nix git add flake.nix git commit -m "Trigger build" git push origin master , in 0.09 seconds) (finished: subtest: Push a new commit to trigger build, in 0.09 seconds) subtest: Wait for nix-eval build to complete buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2799 0 0100 51 100 51 0 0 2238 0 0100 51 100 51 0 0 1863 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1696 0 0100 51 100 51 0 0 1463 0 0100 51 100 51 0 0 1295 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1747 0 0100 51 100 51 0 0 1503 0 0100 51 100 51 0 0 1323 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2826 0 0100 51 100 51 0 0 2257 0 0100 51 100 51 0 0 1885 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1649 0 0100 51 100 51 0 0 1437 0 0100 51 100 51 0 0 1276 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1553 0 0100 51 100 51 0 0 1347 0 0100 51 100 51 0 0 1202 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1608 0 0100 51 100 51 0 0 1290 0 0100 51 100 51 0 0 1096 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1681 0 0100 51 100 51 0 0 1455 0 0100 51 100 51 0 0 1287 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 33.858745] sshd-session[995]: Accepted publickey for root from ::1 port 32892 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 33.877279] sshd-session[995]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 33.890482] systemd-logind[434]: New session '4' of user 'root' with class 'user' and type 'tty'. buildbot # [ 33.893348] systemd[1]: Started Session 4 of User root. buildbot # [ 33.917883] sshd-session[998]: Received disconnect from ::1 port 32892:11: disconnected by user buildbot # [ 33.919056] sshd-session[998]: Disconnected from user root ::1 port 32892 buildbot # [ 33.920076] sshd-session[995]: pam_unix(sshd:session): session closed for user root buildbot # [ 33.927514] systemd[1]: session-4.scope: Deactivated successfully. buildbot # [ 33.932400] systemd-logind[434]: Session 4 logged out. Waiting for processes to exit. buildbot # [ 33.933406] systemd-logind[434]: Removed session 4. buildbot # [ 34.088853] sshd-session[1003]: Accepted publickey for root from ::1 port 32900 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 34.105275] sshd-session[1003]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 34.114069] systemd-logind[434]: New session '5' of user 'root' with class 'user' and type 'tty'. buildbot # [ 34.119362] systemd[1]: Started Session 5 of User root. buildbot # [ 34.160363] sshd-session[1006]: Received disconnect from ::1 port 32900:11: disconnected by user buildbot # [ 34.161515] sshd-session[1006]: Disconnected from user root ::1 port 32900 buildbot # [ 34.162677] sshd-session[1003]: pam_unix(sshd:session): session closed for user root buildbot # [ 34.168395] systemd[1]: session-5.scope: Deactivated successfully. buildbot # [ 34.172716] systemd-logind[434]: Session 5 logged out. Waiting for processes to exit. buildbot # [ 34.174295] systemd-logind[434]: Removed session 5. buildbot # [ 34.187236] twistd[816]: 2026-10-18T06:54:55+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot # [ 34.217069] twistd[816]: 2026-10-18T06:54:55+0000 [-] gitpoller: processing 1 changes: ['dcee440bed967550bc78b921059191285cf384c3'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master" buildbot # [ 34.284273] twistd[816]: 2026-10-18T06:54:55+0000 [-] added change with revision dcee440bed967550bc78b921059191285cf384c3 to database buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2882 0 0100 51 100 51 0 0 2219 0 0100 51 100 51 0 0 1848 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2724 0 0100 51 100 51 0 0 2185 0 0100 51 100 51 0 0 1830 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1785 0 0100 51 100 51 0 0 1532 0 0100 51 100 51 0 0 1350 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1689 0 0100 51 100 51 0 0 1450 0 0100 51 100 51 0 0 1284 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2952 0 0100 51 100 51 0 0 2321 0 0100 51 100 51 0 0 1924 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds) buildbot # [ 39.325658] twistd[816]: 2026-10-18T06:55:00+0000 [-] added buildset 1 to database buildbot # [ 39.471485] twistd[816]: 2026-10-18T06:55:01+0000 [-] starting build using worker buildbot # [ 39.477486] twistd[816]: 2026-10-18T06:55:01+0000 [-] .startBuild buildbot # [ 39.548337] twistd[816]: 2026-10-18T06:55:01+0000 [-] acquireLocks(worker , locks []) buildbot # [ 39.552155] twistd[816]: 2026-10-18T06:55:01+0000 [-] starting build .. pinging the worker buildbot # [ 39.554434] twistd[816]: 2026-10-18T06:55:01+0000 [-] sending ping buildbot # [ 39.555898] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] message from master: ping buildbot # [ 39.557466] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] ping finished: success buildbot # [ 39.576725] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [0] buildbot # [ 39.578058] twistd[816]: 2026-10-18T06:55:01+0000 [-] command '['git', '--version']' in dir 'build' buildbot # [ 39.579689] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 0): startCommand:shell buildbot # [ 39.581868] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand buildbot # [ 39.583321] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '--version']): git --version buildbot # [ 39.585421] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 39.587447] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '--version']): watching logfiles {} buildbot # [ 39.588827] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version'] buildbot # [ 39.590273] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '--version']): using PTY: False buildbot # [ 39.606340] twistd[817]: 2026-10-18T06:55:01+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.013957 buildbot # [ 39.607951] twistd[817]: 2026-10-18T06:55:01+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) buildbot # [ 39.638227] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 39.671966] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [1] buildbot # [ 39.680060] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 1): startCommand:stat buildbot # [ 39.681138] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched' buildbot # [ 39.683950] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) buildbot # [ 39.686479] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=2 buildbot # [ 39.697487] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [2] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 39.730087] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 2): startCommand:mkdir buildbot # [ 39.731230] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) buildbot # [ 39.734252] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 39.742181] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [3] buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 [ 39.779394] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 3): startCommand:downloadFile buildbot # 0 0 [ 39.783869] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) buildbot # [ 39.786304] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=0 buildbot # 0100 401 100 401 0 0 13265 0 0100 [ 39.802697] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [4] buildbot # 401 100 401 0 0 11081 0 0100 401 100 401 0 0 9225 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 39.830558] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 4): startCommand:listdir buildbot # [ 39.831915] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) buildbot # [ 39.834616] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 39.841616] twistd[816]: 2026-10-18T06:55:01+0000 [-] No git repo present, making full clone buildbot # [ 39.842686] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [5] buildbot # [ 39.845828] twistd[816]: 2026-10-18T06:55:01+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build' buildbot # [ 39.878071] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 5): startCommand:shell buildbot # [ 39.879301] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand buildbot # [ 39.882631] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress buildbot # [ 39.901436] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 39.905143] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {} buildbot # [ 39.908347] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress'] buildbot # [ 39.913577] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False buildbot # [ 40.089352] sshd-session[1046]: Accepted publickey for root from ::1 port 32906 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 40.108535] sshd-session[1046]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 40.122309] systemd-logind[434]: New session '6' of user 'root' with class 'user' and type 'tty'. buildbot # [ 40.125463] systemd[1]: Started Session 6 of User root. buildbot # [ 40.172840] sshd-session[1049]: Received disconnect from ::1 port 32906:11: disconnected by user buildbot # [ 40.174275] sshd-session[1049]: Disconnected from user root ::1 port 32906 buildbot # [ 40.175525] sshd-session[1046]: pam_unix(sshd:session): session closed for user root buildbot # [ 40.180745] systemd[1]: session-6.scope: Deactivated successfully. buildbot # [ 40.183685] systemd-logind[434]: Session 6 logged out. Waiting for processes to exit. buildbot # [ 40.186263] systemd-logind[434]: Removed session 6. buildbot # [ 40.200515] twistd[817]: 2026-10-18T06:55:01+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.311615 buildbot # [ 40.204085] twistd[817]: 2026-10-18T06:55:01+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) buildbot # [ 40.207556] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.228698] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [6] buildbot # [ 40.232682] twistd[816]: 2026-10-18T06:55:01+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']' in dir 'build' buildbot # [ 40.252836] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 6): startCommand:shell buildbot # [ 40.254257] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): RunProcess._startCommand buildbot # [ 40.257319] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f dcee440bed967550bc78b921059191285cf384c3 buildbot # [ 40.261784] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.266734] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): watching logfiles {} buildbot # [ 40.269544] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'dcee440bed967550bc78b921059191285cf384c3'] buildbot # [ 40.274334] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): using PTY: False buildbot # [ 40.293505] twistd[817]: 2026-10-18T06:55:01+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'dcee440bed967550bc78b921059191285cf384c3']): command finished with signal None, exit code 0, elapsedTime: 0.027763 buildbot # [ 40.296924] twistd[817]: 2026-10-18T06:55:01+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) buildbot # [ 40.322603] twistd[816]: 2026-10-18T06:55:01+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.344461] twistd[816]: 2026-10-18T06:55:01+0000 [-] : RemoteCommand.run [7] buildbot # [ 40.348064] twistd[816]: 2026-10-18T06:55:01+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build' buildbot # [ 40.367913] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command 7): startCommand:shell buildbot # [ 40.369330] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand buildbot # [ 40.372248] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive buildbot # [ 40.376530] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.379973] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {} buildbot # [ 40.382898] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive'] buildbot # [ 40.387326] twistd[817]: 2026-10-18T06:55:01+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False buildbot # [ 40.498092] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.107120 buildbot # [ 40.501287] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) buildbot # [ 40.504899] twistd[816]: 2026-10-18T06:55:02+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.522669] twistd[816]: 2026-10-18T06:55:02+0000 [-] : RemoteCommand.run [8] buildbot # [ 40.524042] twistd[816]: 2026-10-18T06:55:02+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build' buildbot # [ 40.550064] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command 8): startCommand:shell buildbot # [ 40.551197] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand buildbot # [ 40.552707] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD buildbot # [ 40.554165] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.556506] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {} buildbot # [ 40.559313] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD'] buildbot # [ 40.560778] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False buildbot # [ 40.574359] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.016068 buildbot # [ 40.576628] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) buildbot # [ 40.606128] twistd[816]: 2026-10-18T06:55:02+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.625804] twistd[816]: 2026-10-18T06:55:02+0000 [-] Got Git revision dcee440bed967550bc78b921059191285cf384c3 buildbot # [ 40.627365] twistd[816]: 2026-10-18T06:55:02+0000 [-] : RemoteCommand.run [9] buildbot # [ 40.650071] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command 9): startCommand:rmdir buildbot # [ 40.652055] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand buildbot # [ 40.653982] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot buildbot # [ 40.656357] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs) buildbot # [ 40.658527] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {} buildbot # [ 40.660370] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot'] buildbot # [ 40.664118] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False buildbot # [ 40.680100] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.027854 buildbot # [ 40.682592] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) buildbot # [ 40.711490] twistd[816]: 2026-10-18T06:55:02+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.729808] twistd[816]: 2026-10-18T06:55:02+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): [] buildbot # [ 40.747833] twistd[816]: 2026-10-18T06:55:02+0000 [-] step 'git' complete: success (None) buildbot # [ 40.754900] twistd[816]: 2026-10-18T06:55:02+0000 [-] acquireLocks(step NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(, )]) buildbot # [ 40.768944] twistd[816]: 2026-10-18T06:55:02+0000 [-] : RemoteCommand.run [10] buildbot # [ 40.771405] twistd[816]: 2026-10-18T06:55:02+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build' buildbot # [ 40.774261] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command 10): startCommand:shell buildbot # [ 40.775820] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand buildbot # [ 40.777767] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi' buildbot # [ 40.781512] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.783840] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {} buildbot # [ 40.785579] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'] buildbot # [ 40.787838] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False buildbot # [ 40.808733] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.028214 buildbot # [ 40.811078] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # [ 40.833746] twistd[816]: 2026-10-18T06:55:02+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 40.841442] twistd[816]: 2026-10-18T06:55:02+0000 [-] : RemoteCommand.run [11] buildbot # [ 40.847609] twistd[816]: 2026-10-18T06:55:02+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build' buildbot # [ 40.880846] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command 11): startCommand:shell buildbot # [ 40.883137] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand buildbot # [ 40.886784] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks' buildbot # [ 40.892445] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 40.896658] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {} buildbot # [ 40.900325] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks'] buildbot # % Total % Received % Xferd Avera[ 40.909190] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False buildbot # ge Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 7487 0 0100 401 100 401 0 0 6674 0 0100 401 100 401 0 0 6049 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds) buildbot # [ 41.036656] systemd[1]: Started Nix Daemon. buildbot # [ 41.123769] nix-daemon[1094]: accepted connection from pid 1093, user buildbot-worker buildbot # [ 41.149841] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.266474 buildbot # [ 41.154154] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) buildbot # [ 41.157468] twistd[816]: 2026-10-18T06:55:02+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.182603] twistd[816]: 2026-10-18T06:55:02+0000 [-] releaseLocks(NixEvalCommand(project=, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(, )] buildbot # [ 41.194383] twistd[816]: 2026-10-18T06:55:02+0000 [-] step 'Evaluate flake' complete: success (None) buildbot # [ 41.215916] twistd[816]: 2026-10-18T06:55:02+0000 [-] releaseLocks(BuildTrigger(project=, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): [] buildbot # [ 41.224910] twistd[816]: 2026-10-18T06:55:02+0000 [-] step 'build flake' complete: success (None) buildbot # [ 41.235927] twistd[816]: 2026-10-18T06:55:02+0000 [-] releaseLocks(ProcessSkippedBuilds(project=, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=. at 0x7b6af7c14ae0>, hideStepIf=. at 0x7b6af7c14b80>)): [] buildbot # [ 41.244063] twistd[816]: 2026-10-18T06:55:02+0000 [-] step 'Process skipped builds' complete: skipped (None) buildbot # [ 41.254516] twistd[816]: 2026-10-18T06:55:02+0000 [-] : RemoteCommand.run [12] buildbot # [ 41.257330] twistd[816]: 2026-10-18T06:55:02+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build' buildbot # [ 41.259889] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command 12): startCommand:shell buildbot # [ 41.261381] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand buildbot # [ 41.263424] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ buildbot # [ 41.265990] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.270035] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {} buildbot # [ 41.271923] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/'] buildbot # [ 41.274500] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False buildbot # [ 41.287862] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.018849 buildbot # [ 41.290299] twistd[817]: 2026-10-18T06:55:02+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) buildbot # [ 41.321350] twistd[816]: 2026-10-18T06:55:02+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.343700] twistd[816]: 2026-10-18T06:55:02+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): [] buildbot # [ 41.350622] twistd[816]: 2026-10-18T06:55:02+0000 [-] step 'Cleanup drv paths' complete: success (None) buildbot # [ 41.361145] twistd[816]: 2026-10-18T06:55:02+0000 [-] : RemoteCommand.run [13] buildbot # [ 41.363317] twistd[816]: 2026-10-18T06:55:02+0000 [-] command '['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 41.366818] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command 13): startCommand:shell buildbot # [ 41.368188] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 41.370578] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev dcee440bed967550bc78b921059191285cf384c3 --branch master --repo test-flake buildbot # [ 41.373551] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.376325] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 41.378550] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'dcee440bed967550bc78b921059191285cf384c3', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 41.383103] twistd[817]: 2026-10-18T06:55:02+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot # [ 41.646605] nix-daemon[1094]: accepted connection from pid 1103, user buildbot-worker buildbot # [ 41.672492] twistd[817]: 2026-10-18T06:55:03+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.290010 buildbot # [ 41.675235] twistd[817]: 2026-10-18T06:55:03+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) buildbot # [ 41.679639] twistd[816]: 2026-10-18T06:55:03+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 41.819346] twistd[816]: 2026-10-18T06:55:03+0000 [-] releaseLocks(BuildbotEffectsCommand(project=, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=. at 0x7b6af7c15300>, logEnviron=False)): [] buildbot # [ 41.828604] twistd[816]: 2026-10-18T06:55:03+0000 [-] step 'Evaluate effects' complete: success (None) buildbot # [ 41.840949] twistd[816]: 2026-10-18T06:55:03+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): [] buildbot # [ 41.847611] twistd[816]: 2026-10-18T06:55:03+0000 [-] step 'Buildbot effect' complete: success (None) buildbot # [ 41.857539] twistd[816]: 2026-10-18T06:55:03+0000 [-] : RemoteCommand.run [14] buildbot # [ 41.860971] twistd[816]: 2026-10-18T06:55:03+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']' in dir 'build' buildbot # [ 41.864252] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command 14): startCommand:shell buildbot # [ 41.865732] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand buildbot # [ 41.868346] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev dcee440bed967550bc78b921059191285cf384c3 --branch master --repo test-flake buildbot # [ 41.871688] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs) buildbot # [ 41.874777] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {} buildbot # [ 41.877277] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'dcee440bed967550bc78b921059191285cf384c3', b'--branch', b'master', b'--repo', b'test-flake'] buildbot # [ 41.882308] twistd[817]: 2026-10-18T06:55:03+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): using PTY: False buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 14340 0 0100 401 100 401 0 0 11603 0 0100 401 100 401 0 0 9697 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds) buildbot # [ 42.189677] nix-daemon[1094]: accepted connection from pid 1116, user buildbot-worker buildbot # [ 42.218331] twistd[817]: 2026-10-18T06:55:03+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'dcee440bed967550bc78b921059191285cf384c3', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.337066 buildbot # [ 42.221955] twistd[817]: 2026-10-18T06:55:03+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) buildbot # [ 42.226353] twistd[816]: 2026-10-18T06:55:03+0000 [Broker,0,127.0.0.1] rc=0 buildbot # [ 42.262497] twistd[816]: 2026-10-18T06:55:03+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=. at 0x7b6af7c154e0>, hideStepIf=. at 0x7b6af7c15580>, logEnviron=False)): [] buildbot # [ 42.274432] twistd[816]: 2026-10-18T06:55:03+0000 [-] step 'Evaluate scheduled effects' complete: success (None) buildbot # [ 42.275757] twistd[816]: 2026-10-18T06:55:03+0000 [-] : build finished buildbot # [ 42.285585] twistd[816]: 2026-10-18T06:55:03+0000 [-] releaseLocks(): [] buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 15232 0 0100 411 100 411 0 0 12910 0 0100 411 100 411 0 0 11234 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.11 seconds) (finished: subtest: Wait for nix-eval build to complete, in 17.64 seconds) subtest: Schedule cache is created buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds) buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds) (finished: subtest: Schedule cache is created, in 0.05 seconds) subtest: Nightly schedulers are created buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 57723 0 0100 3793 100 3793 0 0 53587 0 0100 3793 100 3793 0 0 50128 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds) buildbot # [ 43.892167] sshd-session[1154]: Accepted publickey for root from ::1 port 43124 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 43.911285] sshd-session[1154]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 43.926521] systemd-logind[434]: New session '7' of user 'root' with class 'user' and type 'tty'. buildbot # [ 43.931364] systemd[1]: Started Session 7 of User root. buildbot # [ 43.966393] sshd-session[1157]: Received disconnect from ::1 port 43124:11: disconnected by user buildbot # [ 43.967659] sshd-session[1157]: Disconnected from user root ::1 port 43124 buildbot # [ 43.968856] sshd-session[1154]: pam_unix(sshd:session): session closed for user root buildbot # [ 43.978073] systemd[1]: session-7.scope: Deactivated successfully. buildbot # [ 43.984364] systemd-logind[434]: Session 7 logged out. Waiting for processes to exit. buildbot # [ 43.985407] systemd-logind[434]: Removed session 7. buildbot # [ 44.163705] sshd-session[1162]: Accepted publickey for root from ::1 port 43136 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8 buildbot # [ 44.181228] sshd-session[1162]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0) buildbot # [ 44.189222] systemd-logind[434]: New session '8' of user 'root' with class 'user' and type 'tty'. buildbot # [ 44.192397] systemd[1]: Started Session 8 of User root. buildbot # [ 44.234605] sshd-session[1165]: Received disconnect from ::1 port 43136:11: disconnected by user buildbot # [ 44.235829] sshd-session[1165]: Disconnected from user root ::1 port 43136 buildbot # [ 44.237126] sshd-session[1162]: pam_unix(sshd:session): session closed for user root buildbot # [ 44.242846] systemd[1]: session-8.scope: Deactivated successfully. buildbot # [ 44.245438] systemd-logind[434]: Session 8 logged out. Waiting for processes to exit. buildbot # [ 44.249806] systemd-logind[434]: Removed session 8. buildbot # [ 44.255184] twistd[816]: 2026-10-18T06:55:05+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git" buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 56398 0 0100 3793 100 3793 0 0 52448 0 0100 3793 100 3793 0 0 49316 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 44814 0 0100 3793 100 3793 0 0 42489 0 0100 3793 100 3793 0 0 40422 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 49656 0 0100 3793 100 3793 0 0 46722 0 0100 3793 100 3793 0 0 44266 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds) buildbot # [ 47.259836] twistd[816]: 2026-10-18T06:55:08+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake buildbot # [ 47.264787] twistd[816]: 2026-10-18T06:55:08+0000 [-] beginning configuration update buildbot # [ 47.268471] twistd[816]: 2026-10-18T06:55:08+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg' buildbot # [ 47.310780] twistd[816]: 2026-10-18T06:55:08+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work' buildbot # [ 47.319146] twistd[816]: 2026-10-18T06:55:08+0000 [-] adding 1 new schedulers, removing 0 buildbot # [ 47.418091] twistd[816]: 2026-10-18T06:55:08+0000 [-] configuration update complete (took 0.154 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 50617 0 0100 4079 100 4079 0 0 47769 0 0100 4079 100 4079 0 0 45330 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds) buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 58908 0 0100 4079 100 4079 0 0 55173 0 0100 4079 100 4079 0 0 51933 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.12 seconds) (finished: subtest: Nightly schedulers are created, in 4.84 seconds) subtest: Scheduled effect builder exists buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders buildbot # % Total % Received % Xferd Average Speed Time Time Time Current buildbot # Dload Upload Total Spent Left Speed buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 116.4k 0 0100 2371 100 2371 0 0 96672 0 0100 2371 100 2371 0 0 80419 0 0 buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.07 seconds) (finished: subtest: Scheduled effect builder exists, in 0.07 seconds) (finished: run the VM test script, in 49.08 seconds) test script finished in 49.12s cleanup kill QemuMachine (pid 12) buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13) (finished: cleanup, in 0.24 seconds) additionally exposed symbols: buildbot, vlan1, start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh