vm-test-run-scheduled-effects
x86_64-linux.scheduled-effects
· build #32
· raw
1Machine state will be reset. To keep it, pass --keep-machine-state2start all VLans3(finished: start all VLans, in 0.00 seconds)4Test will time out and terminate in 3600 seconds5run the VM test script6additionally exposed symbols:7 buildbot,8 vlan1,9 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh10buildbot: waiting for unit sshd.service11buildbot: waiting for the VM to finish booting12buildbot: starting vm13buildbot: QEMU running (pid 12)14buildbot # Disk image does not exist, creating the virtualisation disk image...15buildbot # Formatting '/build/vm-state-buildbot/tmp.0XCUGondoX', fmt=raw size=107374182416buildbot # mke2fs 1.47.4 (6-Mar-2025)17buildbot # Discarding device blocks: 0/262144 done18buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes19buildbot # Filesystem UUID: df2bdbb3-0077-4930-b1ca-cd208a36da0420buildbot # Superblock backups stored on blocks:21buildbot # 32768, 98304, 163840, 22937622buildbot # 23buildbot # Allocating group tables: 0/8 done24buildbot # Writing inode tables: 0/8 done25buildbot # Creating journal (8192 blocks): done26buildbot # Writing superblocks and filesystem accounting information: 0/8 done27buildbot # 28buildbot # Virtualisation disk image created.29buildbot # SeaBIOS (version rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org)30buildbot # 31buildbot # 32buildbot # iPXE (http://ipxe.org) 00:03.0 CA00 PCI2.10 PnP PMM+3EFD1920+3EF31920 CA0033buildbot # Press Ctrl-B to configure iPXE (PCI 00:03.0)...34buildbot # 35buildbot # 36buildbot # 37buildbot # 38buildbot # iPXE (http://ipxe.org) 00:09.0 CB00 PCI2.10 PnP PMM 3EFD1920 3EF31920 CB0039buildbot # Press Ctrl-B to configure iPXE (PCI 00:09.0)...40buildbot # 41buildbot # 42buildbot # Booting from ROM...43buildbot # Probing EDD (edd=off to disable)... ok[ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT_DYNAMIC Sat Jul 4 11:44:22 UTC 202644buildbot # [ 0.000000] Command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/agxb7rg4vhbayg8vbb208g65bd4qh0mg-nixos-system-buildbot-test/init regInfo=/nix/store/7r0hkd0yq1dfhq46sinf62aq1lfffacq-closure-info/registration console=ttyS0,115200n8 console=tty045buildbot # [ 0.000000] BIOS-provided physical RAM map:46buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable47buildbot # [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved48buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved49buildbot # [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffdafff] usable50buildbot # [ 0.000000] BIOS-e820: [mem 0x000000003ffdb000-0x000000003fffffff] reserved51buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved52buildbot # [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved53buildbot # [ 0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved54buildbot # [ 0.000000] NX (Execute Disable) protection: active55buildbot # [ 0.000000] APIC: Static calls initialized56buildbot # [ 0.000000] SMBIOS 2.8 present.57buildbot # [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/201458buildbot # [ 0.000000] DMI: Memory slots populated: 1/159buildbot # [ 0.000000] Hypervisor detected: KVM60buildbot # [ 0.000000] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000061buildbot # [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d0062buildbot # [ 0.000001] kvm-clock: using sched offset of 545251771 cycles63buildbot # [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns64buildbot # [ 0.000005] tsc: Detected 2400.010 MHz processor65buildbot # [ 0.000811] last_pfn = 0x3ffdb max_arch_pfn = 0x1000000000066buildbot # [ 0.000848] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs67buildbot # [ 0.000850] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT68buildbot # [ 0.002748] found SMP MP-table at [mem 0x000f5470-0x000f547f]69buildbot # [ 0.002759] Using GB pages for direct mapping70buildbot # [ 0.002846] RAMDISK: [mem 0x3e4ba000-0x3ffcffff]71buildbot # [ 0.002854] ACPI: Early table checksum verification disabled72buildbot # [ 0.002857] ACPI: RSDP 0x00000000000F5290 000014 (v00 BOCHS )73buildbot # [ 0.002861] ACPI: RSDT 0x000000003FFE23CC 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001)74buildbot # [ 0.002865] ACPI: FACP 0x000000003FFE2280 000074 (v01 BOCHS BXPC 00000001 BXPC 00000001)75buildbot # [ 0.002872] ACPI: DSDT 0x000000003FFE0040 002240 (v01 BOCHS BXPC 00000001 BXPC 00000001)76buildbot # [ 0.002874] ACPI: FACS 0x000000003FFE0000 00004077buildbot # [ 0.002876] ACPI: APIC 0x000000003FFE22F4 000078 (v03 BOCHS BXPC 00000001 BXPC 00000001)78buildbot # [ 0.002878] ACPI: HPET 0x000000003FFE236C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001)79buildbot # [ 0.002879] ACPI: WAET 0x000000003FFE23A4 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001)80buildbot # [ 0.002880] ACPI: Reserving FACP table memory at [mem 0x3ffe2280-0x3ffe22f3]81buildbot # [ 0.002881] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe227f]82buildbot # [ 0.002882] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]83buildbot # [ 0.002883] ACPI: Reserving APIC table memory at [mem 0x3ffe22f4-0x3ffe236b]84buildbot # [ 0.002883] ACPI: Reserving HPET table memory at [mem 0x3ffe236c-0x3ffe23a3]85buildbot # [ 0.002884] ACPI: Reserving WAET table memory at [mem 0x3ffe23a4-0x3ffe23cb]86buildbot # [ 0.003365] No NUMA configuration found87buildbot # [ 0.003367] Faking a node at [mem 0x0000000000000000-0x000000003ffdafff]88buildbot # [ 0.003370] NODE_DATA(0) allocated [mem 0x3ffd5780-0x3ffdacff]89buildbot # [ 0.005715] Zone ranges:90buildbot # [ 0.005716] DMA [mem 0x0000000000001000-0x0000000000ffffff]91buildbot # [ 0.005717] DMA32 [mem 0x0000000001000000-0x000000003ffdafff]92buildbot # [ 0.005719] Normal empty93buildbot # [ 0.005720] Device empty94buildbot # [ 0.005720] Movable zone start for each node95buildbot # [ 0.005721] Early memory node ranges96buildbot # [ 0.005721] node 0: [mem 0x0000000000001000-0x000000000009efff]97buildbot # [ 0.005722] node 0: [mem 0x0000000000100000-0x000000003ffdafff]98buildbot # [ 0.005723] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffdafff]99buildbot # [ 0.005804] On node 0, zone DMA: 1 pages in unavailable ranges100buildbot # [ 0.006076] On node 0, zone DMA: 97 pages in unavailable ranges101buildbot # [ 0.024171] On node 0, zone DMA32: 37 pages in unavailable ranges102buildbot # [ 0.025163] ACPI: PM-Timer IO Port: 0x608103buildbot # [ 0.025176] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])104buildbot # [ 0.025208] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23105buildbot # [ 0.025210] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)106buildbot # [ 0.025212] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)107buildbot # [ 0.025213] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)108buildbot # [ 0.025214] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)109buildbot # [ 0.025214] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)110buildbot # [ 0.025217] ACPI: Using ACPI (MADT) for SMP configuration information111buildbot # [ 0.025218] ACPI: HPET id: 0x8086a201 base: 0xfed00000112buildbot # [ 0.025223] TSC deadline timer available113buildbot # [ 0.025227] CPU topo: Max. logical packages: 1114buildbot # [ 0.025228] CPU topo: Max. logical dies: 1115buildbot # [ 0.025228] CPU topo: Max. dies per package: 1116buildbot # [ 0.025232] CPU topo: Max. threads per core: 1117buildbot # [ 0.025232] CPU topo: Num. cores per package: 1118buildbot # [ 0.025233] CPU topo: Num. threads per package: 1119buildbot # [ 0.025233] CPU topo: Allowing 1 present CPUs plus 0 hotplug CPUs120buildbot # [ 0.025251] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()121buildbot # [ 0.025285] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]122buildbot # [ 0.025287] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]123buildbot # [ 0.025288] [mem 0x40000000-0xfeffbfff] available for PCI devices124buildbot # [ 0.025289] Booting paravirtualized kernel on KVM125buildbot # [ 0.025292] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns126buildbot # [ 0.029726] setup_percpu: NR_CPUS:384 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1127buildbot # [ 0.032148] percpu: Embedded 98 pages/cpu s278528 r8192 d114688 u2097152128buildbot # [ 0.032195] kvm-guest: PV spinlocks disabled, single CPU129buildbot # [ 0.032196] Kernel command line: console=ttyS0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/agxb7rg4vhbayg8vbb208g65bd4qh0mg-nixos-system-buildbot-test/init regInfo=/nix/store/7r0hkd0yq1dfhq46sinf62aq1lfffacq-closure-info/registration console=ttyS0,115200n8 console=tty0130buildbot # [ 0.032287] Unknown kernel command line parameters "regInfo=/nix/store/7r0hkd0yq1dfhq46sinf62aq1lfffacq-closure-info/registration", will be passed to user space.131buildbot # [ 0.032299] random: crng init done132buildbot # [ 0.032300] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes133buildbot # [ 0.032320] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)134buildbot # [ 0.032880] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)135buildbot # [ 0.032912] Fallback order for Node 0: 0136buildbot # [ 0.032915] Built 1 zonelists, mobility grouping on. Total pages: 262009137buildbot # [ 0.032916] Policy zone: DMA32138buildbot # [ 0.035142] mem auto-init: stack:all(zero), heap alloc:on, heap free:off139buildbot # [ 0.037464] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1140buildbot # [ 0.039770] allocated 2097152 bytes of page_ext141buildbot # [ 0.049343] ftrace: allocating 48598 entries in 192 pages142buildbot # [ 0.049345] ftrace: allocated 192 pages with 2 groups143buildbot # [ 0.050206] Dynamic Preempt: lazy144buildbot # [ 0.050336] rcu: Preemptible hierarchical RCU implementation.145buildbot # [ 0.050336] rcu: RCU event tracing is enabled.146buildbot # [ 0.050337] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.147buildbot # [ 0.050338] Trampoline variant of Tasks RCU enabled.148buildbot # [ 0.050339] Rude variant of Tasks RCU enabled.149buildbot # [ 0.050339] Tracing variant of Tasks RCU enabled.150buildbot # [ 0.050340] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.151buildbot # [ 0.050341] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1152buildbot # [ 0.050392] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.153buildbot # [ 0.050393] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.154buildbot # [ 0.050394] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.155buildbot # [ 0.054905] NR_IRQS: 24832, nr_irqs: 256, preallocated irqs: 16156buildbot # [ 0.055187] rcu: srcu_init: Setting srcu_struct sizes based on contention.157buildbot # [ 0.055290] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)158buildbot # [ 0.062551] Console: colour VGA+ 80x25159buildbot # [ 0.062555] printk: legacy console [tty0] enabled160buildbot # [ 0.103305] printk: legacy console [ttyS0] enabled161buildbot # [ 0.291232] ACPI: Core revision 20250807162buildbot # [ 0.292794] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns163buildbot # [ 0.295686] APIC: Switch to symmetric I/O mode setup164buildbot # [ 0.297424] x2apic enabled165buildbot # [ 0.298655] APIC: Switched APIC routing to: physical x2apic166buildbot # [ 0.301514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1167buildbot # [ 0.303345] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns168buildbot # [ 0.306414] Calibrating delay loop (skipped) preset value.. 4800.02 BogoMIPS (lpj=2400010)169buildbot # [ 0.308531] x86/cpu: User Mode Instruction Prevention (UMIP) activated170buildbot # [ 0.309582] Last level iTLB entries: 4KB 512, 2MB 255, 4MB 127171buildbot # [ 0.310413] Last level dTLB entries: 4KB 512, 2MB 255, 4MB 127, 1GB 0172buildbot # [ 0.311417] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto173buildbot # [ 0.312413] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl174buildbot # [ 0.313413] Transient Scheduler Attacks: Mitigation: Clear CPU buffers175buildbot # [ 0.315412] Spectre V2 : Mitigation: Enhanced / Automatic IBRS176buildbot # [ 0.317412] Speculative Return Stack Overflow: Mitigation: Safe RET177buildbot # [ 0.319412] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization178buildbot # [ 0.321419] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier179buildbot # [ 0.322413] active return thunk: srso_alias_return_thunk180buildbot # [ 0.324440] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'181buildbot # [ 0.325412] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'182buildbot # [ 0.327412] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'183buildbot # [ 0.329413] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask'184buildbot # [ 0.330412] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256'185buildbot # [ 0.331412] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256'186buildbot # [ 0.332412] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'187buildbot # [ 0.333412] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'188buildbot # [ 0.335412] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'189buildbot # [ 0.337413] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256190buildbot # [ 0.338412] x86/fpu: xstate_offset[5]: 832, xstate_sizes[5]: 64191buildbot # [ 0.339413] x86/fpu: xstate_offset[6]: 896, xstate_sizes[6]: 512192buildbot # [ 0.340412] x86/fpu: xstate_offset[7]: 1408, xstate_sizes[7]: 1024193buildbot # [ 0.341412] x86/fpu: xstate_offset[9]: 2432, xstate_sizes[9]: 8194buildbot # [ 0.343412] x86/fpu: xstate_offset[11]: 2440, xstate_sizes[11]: 16195buildbot # [ 0.345412] x86/fpu: xstate_offset[12]: 2456, xstate_sizes[12]: 24196buildbot # [ 0.346412] x86/fpu: Enabled xstate features 0x1ae7, context size is 2480 bytes, using 'compacted' format.197buildbot # [ 0.382040] Freeing SMP alternatives memory: 44K198buildbot # [ 0.382415] pid_max: default: 32768 minimum: 301199buildbot # [ 0.383539] LSM: initializing lsm=capability,landlock,yama,bpf,ima200buildbot # [ 0.385528] landlock: Up and running.201buildbot # [ 0.386412] Yama: becoming mindful.202buildbot # [ 0.388591] LSM support for eBPF active203buildbot # [ 0.389501] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)204buildbot # [ 0.390439] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)205buildbot # [ 0.393506] smpboot: CPU0: AMD EPYC 9654 96-Core Processor (family: 0x19, model: 0x11, stepping: 0x1)206buildbot # [ 0.395003] Performance Events: Fam17h+ core perfctr, AMD PMU driver.207buildbot # [ 0.395422] ... version: 2208buildbot # [ 0.396414] ... bit width: 48209buildbot # [ 0.397414] ... generic counters: 6210buildbot # [ 0.398414] ... generic bitmap: 000000000000003f211buildbot # [ 0.399414] ... fixed-purpose counters: 0212buildbot # [ 0.400414] ... fixed-purpose bitmap: 0000000000000000213buildbot # [ 0.401414] ... value mask: 0000ffffffffffff214buildbot # [ 0.402414] ... max period: 00007fffffffffff215buildbot # [ 0.403414] ... global_ctrl mask: 000000000000003f216buildbot # [ 0.404518] signal: max sigframe size: 3376217buildbot # [ 0.405562] rcu: Hierarchical SRCU implementation.218buildbot # [ 0.406418] rcu: Max phase no-delay instances is 400.219buildbot # [ 0.412124] smp: Bringing up secondary CPUs ...220buildbot # [ 0.412432] smp: Brought up 1 node, 1 CPU221buildbot # [ 0.413417] smpboot: Total of 1 processors activated (4800.02 BogoMIPS)222buildbot # [ 0.414654] Memory: 942400K/1048036K available (17159K kernel code, 2721K rwdata, 13560K rodata, 3636K init, 3020K bss, 98260K reserved, 0K cma-reserved)223buildbot # [ 0.415666] devtmpfs: initialized224buildbot # [ 0.416562] x86/mm: Memory block size: 128MB225buildbot # [ 0.418385] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns226buildbot # [ 0.419446] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)227buildbot # [ 0.420448] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).228buildbot # [ 0.421534] pinctrl core: initialized pinctrl subsystem229buildbot # [ 0.422772] PM: RTC time: 06:00:09, date: 2026-07-05230buildbot # [ 0.426187] NET: Registered PF_NETLINK/PF_ROUTE protocol family231buildbot # [ 0.427793] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations232buildbot # [ 0.428437] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations233buildbot # [ 0.429569] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations234buildbot # [ 0.431415] audit: initializing netlink subsys (disabled)235buildbot # [ 0.432734] thermal_sys: Registered thermal governor 'fair_share'236buildbot # [ 0.432736] thermal_sys: Registered thermal governor 'bang_bang'237buildbot # [ 0.433415] thermal_sys: Registered thermal governor 'step_wise'238buildbot # [ 0.434418] audit: type=2000 audit(1783231208.852:1): state=initialized audit_enabled=0 res=1239buildbot # [ 0.436417] thermal_sys: Registered thermal governor 'user_space'240buildbot # [ 0.436419] thermal_sys: Registered thermal governor 'power_allocator'241buildbot # [ 0.437452] cpuidle: using governor menu242buildbot # [ 0.440623] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5243buildbot # [ 0.441753] PCI: Using configuration type 1 for base access244buildbot # [ 0.442415] PCI: Using configuration type 1 for extended access245buildbot # [ 0.443639] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.246buildbot # [ 0.448676] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages247buildbot # [ 0.449415] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page248buildbot # [ 0.454414] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages249buildbot # [ 0.455414] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page250buildbot # [ 0.465799] ACPI: Added _OSI(Module Device)251buildbot # [ 0.466415] ACPI: Added _OSI(Processor Device)252buildbot # [ 0.471414] ACPI: Added _OSI(Processor Aggregator Device)253buildbot # [ 0.476255] ACPI: 1 ACPI AML tables successfully acquired and loaded254buildbot # [ 0.480222] ACPI: Interpreter enabled255buildbot # [ 0.481341] ACPI: PM: (supports S0 S3 S4 S5)256buildbot # [ 0.484414] ACPI: Using IOAPIC for interrupt routing257buildbot # [ 0.485721] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug258buildbot # [ 0.488413] PCI: Using E820 reservations for host bridge windows259buildbot # [ 0.489566] ACPI: Enabled 2 GPEs in block 00 to 0F260buildbot # [ 0.497463] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])261buildbot # [ 0.498421] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]262buildbot # [ 0.499875] acpiphp: Slot [3] registered263buildbot # [ 0.500533] acpiphp: Slot [4] registered264buildbot # [ 0.501465] acpiphp: Slot [5] registered265buildbot # [ 0.502465] acpiphp: Slot [6] registered266buildbot # [ 0.503455] acpiphp: Slot [7] registered267buildbot # [ 0.504470] acpiphp: Slot [8] registered268buildbot # [ 0.505466] acpiphp: Slot [9] registered269buildbot # [ 0.506456] acpiphp: Slot [10] registered270buildbot # [ 0.507466] acpiphp: Slot [11] registered271buildbot # [ 0.508478] acpiphp: Slot [12] registered272buildbot # [ 0.509457] acpiphp: Slot [13] registered273buildbot # [ 0.510448] acpiphp: Slot [14] registered274buildbot # [ 0.511457] acpiphp: Slot [15] registered275buildbot # [ 0.512460] acpiphp: Slot [16] registered276buildbot # [ 0.513448] acpiphp: Slot [17] registered277buildbot # [ 0.514447] acpiphp: Slot [18] registered278buildbot # [ 0.515462] acpiphp: Slot [19] registered279buildbot # [ 0.516448] acpiphp: Slot [20] registered280buildbot # [ 0.517447] acpiphp: Slot [21] registered281buildbot # [ 0.518448] acpiphp: Slot [22] registered282buildbot # [ 0.519465] acpiphp: Slot [23] registered283buildbot # [ 0.520448] acpiphp: Slot [24] registered284buildbot # [ 0.521448] acpiphp: Slot [25] registered285buildbot # [ 0.522448] acpiphp: Slot [26] registered286buildbot # [ 0.523464] acpiphp: Slot [27] registered287buildbot # [ 0.524448] acpiphp: Slot [28] registered288buildbot # [ 0.525447] acpiphp: Slot [29] registered289buildbot # [ 0.526468] acpiphp: Slot [30] registered290buildbot # [ 0.527483] acpiphp: Slot [31] registered291buildbot # [ 0.528437] PCI host bridge to bus 0000:00292buildbot # [ 0.529421] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]293buildbot # [ 0.530415] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]294buildbot # [ 0.531416] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]295buildbot # [ 0.532415] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]296buildbot # [ 0.533415] pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff window]297buildbot # [ 0.534416] pci_bus 0000:00: root bus resource [bus 00-ff]298buildbot # [ 0.535864] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint299buildbot # [ 0.537344] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 conventional PCI endpoint300buildbot # [ 0.539345] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 conventional PCI endpoint301buildbot # [ 0.542213] pci 0000:00:01.1: BAR 4 [io 0xc1e0-0xc1ef]302buildbot # [ 0.543530] pci 0000:00:01.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk303buildbot # [ 0.544415] pci 0000:00:01.1: BAR 1 [io 0x03f6]: legacy IDE quirk304buildbot # [ 0.545415] pci 0000:00:01.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk305buildbot # [ 0.546415] pci 0000:00:01.1: BAR 3 [io 0x0376]: legacy IDE quirk306buildbot # [ 0.547745] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 conventional PCI endpoint307buildbot # [ 0.549481] pci 0000:00:01.2: BAR 4 [io 0xc100-0xc11f]308buildbot # [ 0.551735] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint309buildbot # [ 0.553390] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI310buildbot # [ 0.554429] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB311buildbot # [ 0.555831] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint312buildbot # [ 0.558497] pci 0000:00:02.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]313buildbot # [ 0.559445] pci 0000:00:02.0: BAR 2 [mem 0xfebd0000-0xfebd0fff]314buildbot # [ 0.560468] pci 0000:00:02.0: ROM [mem 0xfebc0000-0xfebcffff pref]315buildbot # [ 0.561651] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]316buildbot # [ 0.563595] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint317buildbot # [ 0.566452] pci 0000:00:03.0: BAR 0 [io 0xc120-0xc13f]318buildbot # [ 0.567439] pci 0000:00:03.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]319buildbot # [ 0.568500] pci 0000:00:03.0: BAR 4 [mem 0xfe000000-0xfe003fff 64bit pref]320buildbot # [ 0.569430] pci 0000:00:03.0: ROM [mem 0xfeb40000-0xfeb7ffff pref]321buildbot # [ 0.572604] pci 0000:00:04.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint322buildbot # [ 0.575452] pci 0000:00:04.0: BAR 0 [io 0xc140-0xc15f]323buildbot # [ 0.576430] pci 0000:00:04.0: BAR 1 [mem 0xfebd2000-0xfebd2fff]324buildbot # [ 0.577467] pci 0000:00:04.0: BAR 4 [mem 0xfe004000-0xfe007fff 64bit pref]325buildbot # [ 0.580505] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint326buildbot # [ 0.583453] pci 0000:00:05.0: BAR 0 [io 0xc080-0xc0bf]327buildbot # [ 0.584430] pci 0000:00:05.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]328buildbot # [ 0.585504] pci 0000:00:05.0: BAR 4 [mem 0xfe008000-0xfe00bfff 64bit pref]329buildbot # [ 0.588415] pci 0000:00:06.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint330buildbot # [ 0.591431] pci 0000:00:06.0: BAR 0 [io 0xc160-0xc17f]331buildbot # [ 0.593446] pci 0000:00:06.0: BAR 1 [mem 0xfebd4000-0xfebd4fff]332buildbot # [ 0.594472] pci 0000:00:06.0: BAR 4 [mem 0xfe00c000-0xfe00ffff 64bit pref]333buildbot # [ 0.597672] pci 0000:00:07.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint334buildbot # [ 0.600456] pci 0000:00:07.0: BAR 0 [io 0xc180-0xc19f]335buildbot # [ 0.601434] pci 0000:00:07.0: BAR 1 [mem 0xfebd5000-0xfebd5fff]336buildbot # [ 0.602476] pci 0000:00:07.0: BAR 4 [mem 0xfe010000-0xfe013fff 64bit pref]337buildbot # [ 0.606101] pci 0000:00:08.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint338buildbot # [ 0.609455] pci 0000:00:08.0: BAR 0 [io 0xc000-0xc07f]339buildbot # [ 0.610432] pci 0000:00:08.0: BAR 1 [mem 0xfebd6000-0xfebd6fff]340buildbot # [ 0.611470] pci 0000:00:08.0: BAR 4 [mem 0xfe014000-0xfe017fff 64bit pref]341buildbot # [ 0.614479] pci 0000:00:09.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint342buildbot # [ 0.617279] pci 0000:00:09.0: BAR 0 [io 0xc1a0-0xc1bf]343buildbot # [ 0.618431] pci 0000:00:09.0: BAR 1 [mem 0xfebd7000-0xfebd7fff]344buildbot # [ 0.619468] pci 0000:00:09.0: BAR 4 [mem 0xfe018000-0xfe01bfff 64bit pref]345buildbot # [ 0.620432] pci 0000:00:09.0: ROM [mem 0xfeb80000-0xfebbffff pref]346buildbot # [ 0.623442] pci 0000:00:0a.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint347buildbot # [ 0.625484] pci 0000:00:0a.0: BAR 1 [mem 0xfebd8000-0xfebd8fff]348buildbot # [ 0.626472] pci 0000:00:0a.0: BAR 4 [mem 0xfe01c000-0xfe01ffff 64bit pref]349buildbot # [ 0.629480] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint350buildbot # [ 0.632300] pci 0000:00:0b.0: BAR 0 [io 0xc0c0-0xc0ff]351buildbot # [ 0.633431] pci 0000:00:0b.0: BAR 1 [mem 0xfebd9000-0xfebd9fff]352buildbot # [ 0.634471] pci 0000:00:0b.0: BAR 4 [mem 0xfe020000-0xfe023fff 64bit pref]353buildbot # [ 0.637467] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint354buildbot # [ 0.640202] pci 0000:00:0c.0: BAR 0 [io 0xc1c0-0xc1df]355buildbot # [ 0.641432] pci 0000:00:0c.0: BAR 1 [mem 0xfebda000-0xfebdafff]356buildbot # [ 0.642478] pci 0000:00:0c.0: BAR 4 [mem 0xfe024000-0xfe027fff 64bit pref]357buildbot # [ 0.650974] ACPI: PCI: Interrupt link LNKA configured for IRQ 10358buildbot # [ 0.651632] ACPI: PCI: Interrupt link LNKB configured for IRQ 10359buildbot # [ 0.652615] ACPI: PCI: Interrupt link LNKC configured for IRQ 11360buildbot # [ 0.653609] ACPI: PCI: Interrupt link LNKD configured for IRQ 11361buildbot # [ 0.654544] ACPI: PCI: Interrupt link LNKS configured for IRQ 9362buildbot # [ 0.656672] iommu: Default domain type: Translated363buildbot # [ 0.657428] iommu: DMA domain TLB invalidation policy: lazy mode364buildbot # [ 0.658739] ACPI: bus type USB registered365buildbot # [ 0.659476] usbcore: registered new interface driver usbfs366buildbot # [ 0.660453] usbcore: registered new interface driver hub367buildbot # [ 0.661435] usbcore: registered new device driver usb368buildbot # [ 0.663458] NetLabel: Initializing369buildbot # [ 0.664415] NetLabel: domain hash size = 128370buildbot # [ 0.665415] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO371buildbot # [ 0.666469] NetLabel: unlabeled traffic allowed by default372buildbot # [ 0.667433] PCI: Using ACPI for IRQ routing373buildbot # [ 0.669124] pci 0000:00:02.0: vgaarb: setting as boot VGA device374buildbot # [ 0.669409] pci 0000:00:02.0: vgaarb: bridge control possible375buildbot # [ 0.669409] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none376buildbot # [ 0.669419] vgaarb: loaded377buildbot # [ 0.670605] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0378buildbot # [ 0.671415] hpet0: 3 comparators, 64-bit 100.000000 MHz counter379buildbot # [ 0.677513] clocksource: Switched to clocksource kvm-clock380buildbot # [ 0.679898] VFS: Disk quotas dquot_6.6.0381buildbot # [ 0.683328] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)382buildbot # [ 0.685636] pnp: PnP ACPI init383buildbot # [ 0.687369] pnp: PnP ACPI: found 6 devices384buildbot # [ 0.695617] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns385buildbot # [ 0.698265] clocksource: Switched to clocksource acpi_pm386buildbot # [ 0.700026] NET: Registered PF_INET protocol family387buildbot # [ 0.701809] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)388buildbot # [ 0.720915] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)389buildbot # [ 0.723662] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)390buildbot # [ 0.725981] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)391buildbot # [ 0.728391] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)392buildbot # [ 0.730609] TCP: Hash tables configured (established 8192 bind 8192)393buildbot # [ 0.732615] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)394buildbot # [ 0.734926] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)395buildbot # [ 0.737019] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)396buildbot # [ 0.739297] NET: Registered PF_UNIX/PF_LOCAL protocol family397buildbot # [ 0.741057] NET: Registered PF_XDP protocol family398buildbot # [ 0.742646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]399buildbot # [ 0.744527] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]400buildbot # [ 0.746407] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]401buildbot # [ 0.748463] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff window]402buildbot # [ 0.750515] pci_bus 0000:00: resource 8 [mem 0x100000000-0x17fffffff window]403buildbot # [ 0.752714] pci 0000:00:01.0: PIIX3: Enabling Passive Release404buildbot # [ 0.754522] pci 0000:00:00.0: Limiting direct PCI/PCI transfers405buildbot # [ 0.757902] ACPI: \_SB_.LNKD: Enabled at IRQ 11406buildbot # [ 0.761372] PCI: CLS 0 bytes, default 64407buildbot # [ 0.762926] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229840d1729, max_idle_ns: 440795276167 ns408buildbot # [ 0.766046] Trying to unpack rootfs image as initramfs...409buildbot # [ 0.813725] Initialise system trusted keyrings410buildbot # [ 0.817477] workingset: timestamp_bits=40 max_order=18 bucket_order=0411buildbot # [ 0.844773] Key type asymmetric registered412buildbot # [ 0.846137] Asymmetric key parser 'x509' registered413buildbot # [ 0.851329] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)414buildbot # [ 0.856327] io scheduler mq-deadline registered415buildbot # [ 0.860263] io scheduler kyber registered416buildbot # [ 0.863891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled417buildbot # [ 0.868271] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A418buildbot # [ 0.876455] Linux agpgart interface v0.103419buildbot # [ 0.877837] ACPI: bus type drm_connector registered420buildbot # [ 0.883727] usbcore: registered new interface driver usbserial_generic421buildbot # [ 0.885689] usbserial: USB Serial support registered for generic422buildbot # [ 0.890279] amd_pstate: The CPPC feature is supported but currently disabled by the BIOS.423buildbot # [ 0.890279] Please enable it if your BIOS has the CPPC option.424buildbot # [ 0.894337] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled425buildbot # [ 0.903454] drop_monitor: Initializing network drop monitor service426buildbot # [ 0.905552] NET: Registered PF_INET6 protocol family427buildbot # [ 0.910747] Segment Routing with IPv6428buildbot # [ 0.915287] In-situ OAM (IOAM) with IPv6429buildbot # [ 0.917041] IPI shorthand broadcast: enabled430buildbot # [ 0.927925] sched_clock: Marking stable (683029759, 244216939)->(1126940925, -199694227)431buildbot # [ 0.934503] registered taskstats version 1432buildbot # [ 0.936119] Loading compiled-in X.509 certificates433buildbot # [ 0.958268] Demotion targets for Node 0: null434buildbot # [ 0.962334] Key type .fscrypt registered435buildbot # [ 0.963623] Key type fscrypt-provisioning registered436buildbot # [ 0.967402] ima: No TPM chip found, activating TPM-bypass!437buildbot # [ 0.969133] ima: Allocated hash algorithm: sha1438buildbot # [ 0.973299] ima: No architecture policies found439buildbot # [ 0.978265] PM: Magic number: 2:975:12440buildbot # [ 0.982596] RAS: Correctable Errors collector initialized.441buildbot # [ 0.992194] clk: Disabling unused clocks442buildbot # [ 0.995282] PM: genpd: Disabling unused power domains443buildbot # [ 1.123645] Freeing initrd memory: 27736K444buildbot # [ 1.127799] Freeing unused decrypted memory: 2028K445buildbot # [ 1.131478] Freeing unused kernel image (initmem) memory: 3636K446buildbot # [ 1.133408] Write protecting the kernel read-only data: 32768k447buildbot # [ 1.136332] Freeing unused kernel image (text/rodata gap) memory: 1272K448buildbot # [ 1.138848] Freeing unused kernel image (rodata/data gap) memory: 776K449buildbot # [ 1.192076] x86/mm: Checked W+X mappings: passed, no W+X pages found.450buildbot # [ 1.194122] Run /init as init process451buildbot # [ 1.206395] systemd[1]: Inserted module 'autofs4'452buildbot # [ 1.223943] fuse: init (API version 7.45)453buildbot # [ 1.231726] ACPI: \_SB_.LNKC: Enabled at IRQ 10454buildbot # [ 1.241384] ACPI: \_SB_.LNKA: Enabled at IRQ 10455buildbot # [ 1.246140] ACPI: \_SB_.LNKB: Enabled at IRQ 11456buildbot # [ 1.288429] systemd[1]: Successfully made /usr/ read-only.457buildbot # [ 1.629039] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)458buildbot # [ 1.650976] systemd[1]: Detected virtualization kvm.459buildbot # [ 1.655028] systemd[1]: Detected architecture x86-64.460buildbot # [ 1.659045] systemd[1]: Running in initrd.461buildbot # [ 1.663615] systemd[1]: Initializing machine ID from random generator.462buildbot # [ 1.668993] systemd[1]: Hostname set to <buildbot>.463buildbot # [ 1.734888] systemd[1]: Queued start job for default target Initrd Default Target.464buildbot # [ 1.740937] systemd[1]: Created slice Slice /system/modprobe.465buildbot # [ 1.743100] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.466buildbot # [ 1.745636] systemd[1]: Expecting device /dev/disk/by-label/nixos...467buildbot # [ 1.747675] systemd[1]: Reached target Path Units.468buildbot # [ 1.749332] systemd[1]: Reached target Slice Units.469buildbot # [ 1.750983] systemd[1]: Reached target Swaps.470buildbot # [ 1.752516] systemd[1]: Reached target Timer Units.471buildbot # [ 1.754343] systemd[1]: Listening on D-Bus System Message Bus Socket.472buildbot # [ 1.756586] systemd[1]: Listening on Journal Socket (/dev/log).473buildbot # [ 1.758686] systemd[1]: Listening on Journal Sockets.474buildbot # [ 1.760513] systemd[1]: Listening on udev Control Socket.475buildbot # [ 1.762459] systemd[1]: Listening on udev Kernel Socket.476buildbot # [ 1.764277] systemd[1]: Reached target Socket Units.477buildbot # [ 1.767112] systemd[1]: Starting Create List of Static Device Nodes...478buildbot # [ 1.774358] systemd[1]: Starting Load Kernel Module 9pnet_virtio...479buildbot # [ 1.782472] systemd[1]: Starting Load Kernel Module configfs...480buildbot # [ 1.799347] systemd[1]: Starting Journal Service...481buildbot # [ 1.817351] systemd[1]: Starting Load Kernel Modules...482buildbot # [ 1.820999] netfs: FS-Cache loaded483buildbot # [ 1.823809] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki484buildbot # [ 1.843569] 9pnet: Installing 9P2000 support485buildbot # [ 1.861567] systemd[1]: Starting Coldplug All udev Devices...486buildbot # [ 1.872565] systemd-journald[67]: Collecting audit messages is disabled.487buildbot # [ 1.881394] systemd[1]: Finished Create List of Static Device Nodes.488buildbot # [ 1.891145] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.489buildbot # [ 1.905917] systemd[1]: Finished Load Kernel Module 9pnet_virtio.490buildbot # [ 1.910893] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.491buildbot # [ 1.916831] systemd[1]: modprobe@configfs.service: Deactivated successfully.492buildbot # [ 1.926090] systemd[1]: Finished Load Kernel Module configfs.493buildbot # [ 1.927949] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev494buildbot # [ 1.936034] systemd[1]: Kernel Configuration File System skipped, unmet condition check ConditionPathExists=/sys/kernel/config495buildbot # [ 1.956530] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...496buildbot # [ 1.977413] systemd[1]: Finished Load Kernel Modules.497buildbot # [ 1.987996] systemd[1]: Starting Apply Kernel Variables...498buildbot # [ 2.013410] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.499buildbot # [ 2.028370] systemd[1]: Starting Create Static Device Nodes in /dev...500buildbot # [ 2.047402] systemd[1]: Finished Apply Kernel Variables.501buildbot # [ 2.069321] systemd[1]: Finished Create Static Device Nodes in /dev.502buildbot # [ 2.075650] systemd[1]: Reached target Preparation for Local File Systems.503buildbot # [ 2.082374] systemd[1]: Reached target Local File Systems.504buildbot # [ 2.091705] systemd[1]: Starting Rule-based Manager for Device Events and Files...505buildbot # [ 1.851852] systemd-modules-load[68]: Inserted module 'dm_mod'506buildbot # [ 1.854415] systemd-modules-load[68]: Inserted module 'virtio_balloon'507buildbot # [ 1.857498] systemd-modules-load[68]: Inserted module 'virtio_gpu'508buildbot # [ 2.111590] systemd[1]: Started Journal Service.509buildbot # [ 1.892344] systemd[1]: Starting Create System Files and Directories...510buildbot # [ 1.920941] systemd-udevd[74]: Using default interface naming scheme 'v260'.511buildbot # [ 1.930715] systemd[1]: Finished Create System Files and Directories.512buildbot # [ 1.967156] systemd[1]: Started Rule-based Manager for Device Events and Files.513buildbot # [ 2.054276] systemd[1]: Finished Coldplug All udev Devices.514buildbot # [ 2.056850] systemd[1]: Reached target System Initialization.515buildbot # [ 2.060120] systemd[1]: Reached target Basic System.516buildbot # [ 2.577702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12517buildbot # [ 2.601106] uhci_hcd 0000:00:01.2: UHCI Host Controller518buildbot # [ 2.617147] serio: i8042 KBD port at 0x60,0x64 irq 1519buildbot # [ 2.627437] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1520buildbot # [ 2.629271] uhci_hcd 0000:00:01.2: detected 2 ports521buildbot # [ 2.632258] serio: i8042 AUX port at 0x60,0x64 irq 12522buildbot # [ 2.642849] SCSI subsystem initialized523buildbot # [ 2.649935] uhci_hcd 0000:00:01.2: irq 11, io port 0x0000c100524buildbot # [ 2.653455] virtio_blk virtio5: 1/0/0 default/read/poll queues525buildbot # [ 2.666097] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.18526buildbot # [ 2.686704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1527buildbot # [ 2.697591] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)528buildbot # [ 2.706273] usb usb1: Product: UHCI Host Controller529buildbot # [ 2.716435] usb usb1: Manufacturer: Linux 6.18.38 uhci_hcd530buildbot # [ 2.730510] usb usb1: SerialNumber: 0000:00:01.2531buildbot # [ 2.740722] hub 1-0:1.0: USB hub found532buildbot # [ 2.750284] hub 1-0:1.0: 2 ports detected533buildbot # [ 2.516780] systemd[1]: Starting Virtual Console Setup...534buildbot # [ 2.540967] (udev-worker)[91]: Network interface NamePolicy= disabled on kernel command line.535buildbot # [ 2.551249] (udev-worker)[88]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.536buildbot # [ 2.555407] (udev-worker)[88]: Network interface NamePolicy= disabled on kernel command line.537buildbot # [ 2.568494] systemd-vconsole-setup[98]: Configuration of first virtual console was skipped, ignoring remaining ones.538buildbot # [ 2.578584] systemd[1]: Finished Virtual Console Setup.539buildbot # [ 2.837310] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0540buildbot # [ 2.618713] systemd[1]: Found device /dev/disk/by-label/nixos.541buildbot # [ 2.620668] systemd[1]: Reached target Initrd Root Device.542buildbot # [ 2.625085] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...543buildbot # [ 2.878342] scsi host0: ata_piix544buildbot # [ 2.885653] scsi host1: ata_piix545buildbot # [ 2.886706] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc1e0 irq 14 lpm-pol 0546buildbot # [ 2.894091] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc1e8 irq 15 lpm-pol 0547buildbot # [ 2.663787] systemd-fsck[112]: nixos: clean, 12/65536 files, 13019/262144 blocks548buildbot # [ 2.671886] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.549buildbot # [ 2.677324] systemd[1]: Mounting /sysroot...550buildbot # [ 2.988303] usb 1-1: new full-speed USB device number 2 using uhci_hcd551buildbot # [ 3.052895] ata2: found unknown device (class 0)552buildbot # [ 3.059710] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100553buildbot # [ 3.068868] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5554buildbot # [ 3.145501] sr 1:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray555buildbot # [ 3.160094] cdrom: Uniform CD-ROM driver Revision: 3.20556buildbot # [ 3.161719] usb 1-1: New USB device found, idVendor=0627, idProduct=0001, bcdDevice= 0.00557buildbot # [ 3.165094] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=10558buildbot # [ 3.171260] usb 1-1: Product: QEMU USB Tablet559buildbot # [ 3.175252] usb 1-1: Manufacturer: QEMU560buildbot # [ 3.177252] usb 1-1: SerialNumber: 28754-0000:00:01.2-1561buildbot # [ 3.219680] EXT4-fs (vda): mounted filesystem df2bdbb3-0077-4930-b1ca-cd208a36da04 r/w with ordered data mode. Quota mode: none.562buildbot # [ 2.983234] systemd[1]: Mounted /sysroot.563buildbot # [ 2.985924] systemd[1]: Reached target Initrd Root File System.564buildbot # [ 3.234999] hid: raw HID events driver (C) Jiri Kosina565buildbot # [ 2.994163] systemd[1]: Starting Mountpoints Configured in the Real Root...566buildbot # [ 3.014944] systemd-sysroot-fstab-check[123]: /sysroot should be mounted in the initrd, will request daemon-reload.[ 3.261709] usbcore: registered new interface driver usbhid567buildbot # 568buildbot # [ 3.022125] systemd[1]: Reload requested from client PID 123 ('systemd-sysroot') (unit initrd-parse-etc.service)...569buildbot # [ 3.024945] systemd[1]: Reloading...570buildbot # [ 3.273535] usbhid: USB HID core driver571buildbot # [ 3.301738] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2572buildbot # [ 3.311184] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0573buildbot # [ 3.187367] systemd[1]: Reloading finished in 160 ms.574buildbot # [ 3.194684] systemd-sysroot-fstab-check[123]: Requesting initrd-fs.target/start/replace...575buildbot # [ 3.200246] systemd-sysroot-fstab-check[123]: Requesting swap.target/start/replace...576buildbot # [ 3.207355] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio577buildbot # [ 3.210672] systemd[1]: initrd-parse-etc.service: Deactivated successfully.578buildbot # [ 3.214205] systemd[1]: Finished Mountpoints Configured in the Real Root.579buildbot # [ 3.216202] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.580buildbot # [ 3.639429] systemd[1]: Mounting /sysroot/nix/.ro-store...581buildbot # [ 3.650201] systemd[1]: Mounting /sysroot/nix/.rw-store...582buildbot # [ 3.659950] systemd[1]: Mounting /sysroot/run...583buildbot # [ 3.676721] systemd[1]: Mounting /sysroot/tmp/shared...584buildbot # [ 3.692397] systemd[1]: Mounting /sysroot/tmp/xchg...585buildbot # [ 3.725534] systemd[1]: Mounted /sysroot/nix/.rw-store.586buildbot # [ 3.973824] 9p: Installing v9fs 9p2000 file system support587buildbot # [ 3.738549] systemd[1]: Mounted /sysroot/run.588buildbot # [ 3.750655] systemd[1]: Mounted /sysroot/nix/.ro-store.589buildbot # [ 3.753555] systemd[1]: Mounted /sysroot/tmp/shared.590buildbot # [ 3.756194] systemd[1]: Mounted /sysroot/tmp/xchg.591buildbot # [ 3.760324] systemd[1]: Starting rw-sysroot-nix-store.service...592buildbot # [ 3.773365] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.593buildbot # [ 3.776623] systemd[1]: Finished rw-sysroot-nix-store.service.594buildbot # [ 4.639189] systemd[1]: Mounting /sysroot/nix/store...595buildbot # [ 4.692272] systemd[1]: Mounted /sysroot/nix/store.596buildbot # [ 4.693776] systemd[1]: Reached target Initrd File Systems.597buildbot # [ 4.696658] systemd[1]: Starting Find NixOS closure...598buildbot # [ 4.702584] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...599buildbot # [ 4.725616] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.600buildbot # [ 4.730244] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.601buildbot # [ 4.740281] systemd[1]: Finished Find NixOS closure.602buildbot # [ 4.742472] systemd[1]: Reached target Initrd Default Target.603buildbot # [ 4.745204] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...604buildbot # [ 4.764618] systemd[1]: Stopped target Initrd Default Target.605buildbot # [ 4.766920] systemd[1]: Stopped target Basic System.606buildbot # [ 4.769245] systemd[1]: Stopped target Initrd Root Device.607buildbot # [ 4.770768] systemd[1]: Stopped target Path Units.608buildbot # [ 4.772250] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.609buildbot # [ 4.775221] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.610buildbot # [ 4.777328] systemd[1]: Stopped target Slice Units.611buildbot # [ 4.779263] systemd[1]: Stopped target Socket Units.612buildbot # [ 4.780720] systemd[1]: Stopped target System Initialization.613buildbot # [ 4.783142] systemd[1]: Stopped target Swaps.614buildbot # [ 4.784456] systemd[1]: Stopped target Timer Units.615buildbot # [ 4.786198] systemd[1]: dbus.socket: Deactivated successfully.616buildbot # [ 4.788247] systemd[1]: Closed D-Bus System Message Bus Socket.617buildbot # [ 4.790242] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.618buildbot # [ 4.793142] systemd[1]: Stopped Find NixOS closure.619buildbot # [ 4.794540] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio620buildbot # [ 4.798165] systemd[1]: Starting rw-sysroot-nix-store.service...621buildbot # [ 4.801205] systemd[1]: systemd-sysctl.service: Deactivated successfully.622buildbot # [ 4.803959] systemd[1]: Stopped Apply Kernel Variables.623buildbot # [ 4.805499] systemd[1]: systemd-modules-load.service: Deactivated successfully.624buildbot # [ 4.807419] systemd[1]: Stopped Load Kernel Modules.625buildbot # [ 4.811393] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.626buildbot # [ 4.813447] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.627buildbot # [ 4.815566] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.628buildbot # [ 4.819813] systemd[1]: Stopped Create System Files and Directories.629buildbot # [ 4.821604] systemd[1]: Stopped target Local File Systems.630buildbot # [ 4.823341] systemd[1]: Stopped target Preparation for Local File Systems.631buildbot # [ 4.825965] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.632buildbot # [ 4.828223] systemd[1]: Stopped Coldplug All udev Devices.633buildbot # [ 4.830232] systemd[1]: Stopping Rule-based Manager for Device Events and Files...634buildbot # [ 4.833908] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.635buildbot # [ 4.835857] systemd[1]: Stopped Virtual Console Setup.636buildbot # [ 4.838257] systemd[1]: initrd-cleanup.service: Deactivated successfully.637buildbot # [ 4.841305] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.638buildbot # [ 4.844544] systemd[1]: systemd-udevd.service: Deactivated successfully.639buildbot # [ 4.850284] systemd[1]: Stopped Rule-based Manager for Device Events and Files.640buildbot # [ 4.856213] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.641buildbot # [ 4.858206] systemd[1]: Closed udev Control Socket.642buildbot # [ 4.860135] systemd[1]: Starting Cleanup udev Database...643buildbot # [ 4.862239] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.644buildbot # [ 4.864337] systemd[1]: Stopped Create Static Device Nodes in /dev.645buildbot # [ 4.866222] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.646buildbot # [ 4.869231] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.647buildbot # [ 4.871163] systemd[1]: kmod-static-nodes.service: Deactivated successfully.648buildbot # [ 4.873305] systemd[1]: Stopped Create List of Static Device Nodes.649buildbot # [ 4.876300] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.650buildbot # [ 4.878919] systemd[1]: Finished rw-sysroot-nix-store.service.651buildbot # [ 4.897758] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.652buildbot # [ 4.900661] systemd[1]: Finished Cleanup udev Database.653buildbot # [ 4.903261] systemd[1]: Reached target Switch Root.654buildbot # [ 4.905570] systemd[1]: Starting NixOS Activation...655buildbot # [ 5.103277] initrd-nixos-activation-start[177]: booting system configuration /nix/store/agxb7rg4vhbayg8vbb208g65bd4qh0mg-nixos-system-buildbot-test656buildbot # [ 5.182833] initrd-nixos-activation-start[177]: running activation script...657buildbot # [ 5.687488] initrd-nixos-activation-start[200]: setting up /etc...658buildbot # [ 6.002663] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.659buildbot # [ 6.006249] systemd[1]: Finished NixOS Activation.660buildbot # [ 6.008427] systemd[1]: Starting Switch Root...661buildbot # [ 6.024893] systemd[1]: Switching root.662buildbot # [ 6.284813] systemd-journald[67]: Received SIGTERM from PID 1 (systemd).663buildbot # [ 6.452273] NET: Registered PF_VSOCK protocol family664buildbot # [ 6.845928] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)665buildbot # [ 6.862463] systemd[1]: Detected virtualization kvm.666buildbot # [ 6.865669] systemd[1]: Detected architecture x86-64.667buildbot # [ 6.869013] systemd[1]: Detected first boot.668buildbot # [ 6.878432] systemd[1]: Initializing machine ID from random generator.669buildbot # [ 7.141813] systemd[1]: bpf-restrict-fs: LSM BPF program attached670buildbot # [ 7.285264] systemd[1]: Applying preset policy.671buildbot # [ 7.886175] systemd[1]: Populated /etc with preset unit settings.672buildbot # [ 8.497411] systemd[1]: initrd-switch-root.service: Deactivated successfully.673buildbot # [ 8.499869] systemd[1]: Stopped initrd-switch-root.service.674buildbot # [ 8.504047] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.675buildbot # [ 8.507373] systemd[1]: Created slice Slice /system/getty.676buildbot # [ 8.509567] systemd[1]: Created slice User and Session Slice.677buildbot # [ 8.511296] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.678buildbot # [ 8.513415] systemd[1]: Started Forward Password Requests to Wall Directory Watch.679buildbot # [ 8.515305] systemd[1]: Expecting device /dev/hvc0...680buildbot # [ 8.516615] systemd[1]: Expecting device /dev/ttyS0...681buildbot # [ 8.517963] systemd[1]: Reached target Local Encrypted Volumes.682buildbot # [ 8.519475] systemd[1]: Stopped target initrd-fs.target.683buildbot # [ 8.520832] systemd[1]: Stopped target initrd-root-fs.target.684buildbot # [ 8.522275] systemd[1]: Stopped target initrd-switch-root.target.685buildbot # [ 8.523826] systemd[1]: Reached target Virtual Machines and Containers.686buildbot # [ 8.525533] systemd[1]: Reached target Path Units.687buildbot # [ 8.526853] systemd[1]: Reached target Remote File Systems.688buildbot # [ 8.528314] systemd[1]: Reached target Slice Units.689buildbot # [ 8.529594] systemd[1]: Reached target Swaps.690buildbot # [ 8.533722] systemd[1]: Listening on Query the User Interactively for a Password.691buildbot # [ 8.538850] systemd[1]: Listening on Process Core Dump Socket.692buildbot # [ 8.542933] systemd[1]: Listening on Credential Encryption/Decryption.693buildbot # [ 8.546995] systemd[1]: Listening on Factory Reset Management.694buildbot # [ 8.552560] systemd[1]: Starting Journal Log Access Socket...695buildbot # [ 8.554752] systemd[1]: Listening on Journal Audit Socket.696buildbot # [ 8.559479] systemd[1]: Listening on Console Output Muting Service Socket.697buildbot # [ 8.561476] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.698buildbot # [ 8.563366] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki699buildbot # [ 8.565656] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki700buildbot # [ 8.578671] systemd[1]: Listening on Disk Repartitioning Service Socket.701buildbot # [ 8.580504] systemd[1]: Listening on udev Control Socket.702buildbot # [ 8.582106] systemd[1]: Listening on udev Varlink Socket.703buildbot # [ 8.587271] systemd[1]: Mounting Huge Pages File System...704buildbot # [ 8.591899] systemd[1]: Mounting POSIX Message Queue File System...705buildbot # [ 8.599004] systemd[1]: Mounting Kernel Debug File System...706buildbot # [ 8.609019] systemd[1]: Mounting Kernel Trace File System...707buildbot # [ 8.616490] systemd[1]: Starting Create List of Static Device Nodes...708buildbot # [ 8.621519] systemd[1]: Load Kernel Module 9pnet_virtio skipped, unmet condition check ConditionKernelModuleLoaded=!9pnet_virtio709buildbot # [ 8.635399] systemd[1]: Starting Load Kernel Module configfs...710buildbot # [ 8.637438] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm711buildbot # [ 8.640054] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore712buildbot # [ 8.643577] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse713buildbot # [ 8.653791] systemd[1]: Mounting FUSE Control File System...714buildbot # [ 8.660313] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67715buildbot # [ 8.679775] systemd[1]: Starting Journal Service...716buildbot # [ 8.708320] systemd[1]: Starting Load Kernel Modules...717buildbot # [ 8.727471] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...718buildbot # [ 8.736609] systemd[1]: Starting Remount Root and Kernel File Systems...719buildbot # [ 8.746696] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki720buildbot # [ 8.771081] systemd[1]: Starting Coldplug All udev Devices...721buildbot # [ 8.778547] systemd-journald[269]: Collecting audit messages is enabled.722buildbot # [ 8.801234] systemd[1]: Listening on Journal Log Access Socket.723buildbot # [ 8.814562] loop: module loaded724buildbot # [ 8.815637] systemd[1]: Mounted Huge Pages File System.725buildbot # [ 8.821997] systemd[1]: Mounted POSIX Message Queue File System.726buildbot # [ 8.832300] systemd[1]: Mounted Kernel Debug File System.727buildbot # [ 8.839035] systemd[1]: Started Journal Service.728buildbot # [ 8.599105] systemd[1]: Queued start job for default target Multi-User System.[ 8.844996] EXT4-fs (vda): re-mounted df2bdbb3-0077-4930-b1ca-cd208a36da04.729buildbot # 730buildbot # [ 8.603567] systemd[1]: systemd-journald.service: Deactivated successfully.731buildbot # [ 8.612852] systemd-modules-load[270]: Inserted module 'loop'732buildbot # [ 8.614928] systemd[1]: Mounted Kernel Trace File System.733buildbot # [ 8.621392] systemd[1]: Finished Create List of Static Device Nodes.734buildbot # [ 8.626608] systemd[1]: modprobe@configfs.service: Deactivated successfully.735buildbot # [ 8.634507] systemd[1]: Finished Load Kernel Module configfs.736buildbot # [ 8.637506] systemd[1]: Mounted FUSE Control File System.737buildbot # [ 8.643200] systemd-modules-load[270]: Inserted module 'tls'738buildbot # [ 8.646756] systemd[1]: Finished Remount Root and Kernel File Systems.739buildbot # [ 8.656268] systemd[1]: Finished Load Kernel Modules.740buildbot # [ 8.672228] systemd[1]: Listening on Disk Image Download Service Socket.741buildbot # [ 8.682100] systemd[1]: Mounting Kernel Configuration File System...742buildbot # [ 8.688101] systemd[1]: Starting Flush Journal to Persistent Storage...743buildbot # [ 8.689898] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore744buildbot # [ 8.694715] systemd-oomd[272]: No swap; memory pressure usage will be degraded745buildbot # [ 8.702953] systemd[1]: Starting Load/Save OS Random Seed...746buildbot # [ 8.717616] systemd[1]: Starting Apply Kernel Variables...747buildbot # [ 8.730341] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...748buildbot # [ 8.733107] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki749buildbot # [ 8.741097] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.750buildbot # [ 9.037556] systemd-journald[269]: Received client request to flush runtime journal.751buildbot # [ 8.958666] systemd[1]: Mounted Kernel Configuration File System.752buildbot # [ 8.964267] systemd[1]: Finished Load/Save OS Random Seed.753buildbot # [ 8.967290] systemd[1]: Reached target First Boot Complete.754buildbot # [ 8.971279] systemd[1]: Finished Apply Kernel Variables.755buildbot # [ 8.972857] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.756buildbot # [ 8.975416] systemd[1]: Starting Create Static Device Nodes in /dev...757buildbot # [ 8.977844] systemd[1]: Finished Flush Journal to Persistent Storage.758buildbot # [ 9.042186] systemd[1]: Finished Create Static Device Nodes in /dev.759buildbot # [ 9.045114] systemd[1]: Reached target Preparation for Local File Systems.760buildbot # [ 9.050976] systemd[1]: Starting Rule-based Manager for Device Events and Files...761buildbot # [ 9.106482] systemd[1]: Finished Coldplug All udev Devices.762buildbot # [ 9.144290] systemd-udevd[301]: Using default interface naming scheme 'v260'.763buildbot # [ 9.257378] systemd[1]: Mounting /run/wrappers...764buildbot # [ 9.272391] systemd[1]: Started Rule-based Manager for Device Events and Files.765buildbot # [ 9.301434] systemd[1]: Mounted /run/wrappers.766buildbot # [ 9.304995] systemd[1]: Reached target Local File Systems.767buildbot # [ 9.310109] systemd[1]: Listening on Boot Loader Control Service Socket.768buildbot # [ 9.314682] systemd[1]: Starting register-nix-paths.service...769buildbot # [ 9.322104] systemd[1]: Starting Create SUID/SGID Wrappers...770buildbot # [ 9.323715] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.771buildbot # [ 9.333667] systemd[1]: Starting Save Transient machine-id to Disk...772buildbot # [ 9.346826] systemd[1]: Starting Create System Files and Directories...773buildbot # [ 9.424850] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.774buildbot # [ 9.432312] systemd[1]: Finished Save Transient machine-id to Disk.775buildbot # [ 9.512220] systemd[1]: Finished Create System Files and Directories.776buildbot # [ 9.523484] systemd[1]: Starting Rebuild Journal Catalog...777buildbot # [ 9.530605] systemd[1]: Starting Record System Boot/Shutdown in UTMP...778buildbot # [ 9.630607] systemd[1]: Finished Record System Boot/Shutdown in UTMP.779buildbot # [ 9.684994] systemd[1]: Finished Rebuild Journal Catalog.780buildbot # [ 9.694922] systemd[1]: Starting Update is Completed...781buildbot # [ 9.728465] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse782buildbot # [ 9.756444] systemd[1]: Finished Update is Completed.783buildbot # [ 9.926805] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.784buildbot # [ 9.998248] systemd[1]: Condition check resulted in /dev/ttyS0 being skipped.785buildbot # [ 10.032246] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.786buildbot # [ 10.035909] systemd[1]: Finished Create SUID/SGID Wrappers.787buildbot # [ 10.042764] (udev-worker)[332]: Network interface NamePolicy= disabled on kernel command line.788buildbot # [ 10.046342] (udev-worker)[336]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.789buildbot # [ 10.051107] (udev-worker)[336]: Network interface NamePolicy= disabled on kernel command line.790buildbot # [ 10.223222] systemd[1]: Condition check resulted in Virtio network device being skipped.791buildbot # [ 10.228105] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore792buildbot # [ 10.237078] systemd[1]: Starting Create SUID/SGID Wrappers...793buildbot # [ 10.238668] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.794buildbot # [ 10.242883] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67795buildbot # [ 10.246734] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore796buildbot # [ 10.250396] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki797buildbot # [ 10.253576] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki798buildbot # [ 10.372934] systemd[1]: Finished register-nix-paths.service.799buildbot # [ 10.698005] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3800buildbot # [ 10.716861] mousedev: PS/2 mouse device common for all mice801buildbot # [ 10.743888] ACPI: button: Power Button [PWRF]802buildbot # [ 10.791565] rtc_cmos 00:05: RTC can wake from S4803buildbot # [ 10.821089] parport_pc 00:03: reported by Plug and Play ACPI804buildbot # [ 10.823079] Floppy drive(s): fd0 is 2.88M AMI BIOS805buildbot # [ 10.825126] rtc_cmos 00:05: registered as rtc0806buildbot # [ 10.832177] rtc_cmos 00:05: setting system clock to 2026-07-05T06:00:19 UTC (1783231219)807buildbot # [ 10.847163] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]808buildbot # [ 10.857981] FDC 0 is a S82078B809buildbot # [ 10.891771] bochs-drm 0000:00:02.0: vgaarb: deactivate vga console810buildbot # [ 10.910073] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0811buildbot # [ 10.938931] input: QEMU Virtio Keyboard as /devices/pci0000:00/0000:00:0a.0/virtio7/input/input4812buildbot # [ 10.958769] rtc_cmos 00:05: alarms up to one day, y3k, 242 bytes nvram, hpet irqs813buildbot # [ 10.959164] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD814buildbot # [ 10.845303] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.815buildbot # [ 10.848220] systemd[1]: Finished Create SUID/SGID Wrappers.816buildbot # [ 10.849789] systemd[1]: Reached target System Initialization.817buildbot # [ 10.853116] systemd[1]: Started Discard unused filesystem blocks once a week.818buildbot # [ 10.855509] systemd[1]: Started Daily Cleanup of Temporary Directories.819buildbot # [ 10.858785] systemd[1]: Reached target Timer Units.820buildbot # [ 10.860376] systemd[1]: Listening on D-Bus System Message Bus Socket.821buildbot # [ 10.863232] systemd[1]: Listening on Nix Daemon Socket.822buildbot # [ 10.867349] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).823buildbot # [ 10.870237] systemd[1]: Listening on Hostname Service Socket.824buildbot # [ 10.872381] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.825buildbot # [ 10.876249] systemd[1]: Reached target Socket Units.826buildbot # [ 10.877676] systemd[1]: Reached target Basic System.827buildbot # [ 10.881840] systemd[1]: Started backdoor.service.828buildbot # [ 10.889832] systemd[1]: Starting Import lastlog data into lastlog2 database...829buildbot # [ 11.012116] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input6830buildbot # [ 11.012605] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input5831buildbot # [ 10.900107] systemd[1]: Starting Name Service Cache Daemon (nsncd)...832buildbot # [ 11.042817] Console: switching to colour dummy device 80x25833buildbot # [ 11.211717] [drm] Found bochs VGA, ID 0xb0c5.834buildbot # [ 11.211724] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebd0000.835buildbot # [ 10.911214] systemd[1]: Starting Post-Boot Actions...836buildbot # [ 10.971773] systemd[1]: Started Reset console on configuration changes.837buildbot # [ 10.973653] systemd[1]: Starting resolvconf update...838buildbot # [ 10.977051] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.839buildbot # [ 10.980886] systemd[1]: Starting D-Bus System Message Bus...840buildbot # [ 11.284152] bochs-drm 0000:00:02.0: [drm] Registered 1 planes with drm panic841buildbot # [ 11.065404] systemd[1]: Finished Post-Boot Actions.842buildbot # [ 11.098332] nsncd[459]: Jul 05 06:00:20.007 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"843buildbot # [ 11.109149] systemd[1]: Started Name Service Cache Daemon (nsncd).844buildbot # connecting to host...845buildbot # [ 11.121510] systemd[1]: Reached target Host and Network Name Lookups.846buildbot # [ 11.123307] systemd[1]: Reached target User and Group Name Lookups.847buildbot # [ 11.377354] [drm] Initialized bochs-drm 1.0.0 for 0000:00:02.0 on minor 0848buildbot # [ 11.142129] systemd[1]: Starting User Login Management...849buildbot # [ 11.158080] systemd[1]: Starting Virtual Console Setup...850buildbot: Guest shell says: b'Spawning backdoor root shell...\n'851buildbot: connected to guest root shell852buildbot: (connecting took 12.16 seconds)853buildbot: (finished: waiting for the VM to finish booting, in 12.35 seconds)854buildbot # [ 11.173549] systemd[1]: Finished Import lastlog data into lastlog2 database.855buildbot # [ 11.234786] dbus-broker-launch[463]: Looking up NSS user entry for 'systemd-timesync'...856buildbot # [ 11.261387] dbus-broker-launch[463]: NSS returned no entry for 'systemd-timesync'857buildbot # [ 11.265411] dbus-broker-launch[463]: Invalid user-name in /nix/store/182vzgard5sbqlk0s3kdzmcpg2461hc3-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"858buildbot # [ 11.365221] dbus-broker-launch[463]: Ready859buildbot # [ 11.372291] systemd[1]: Started D-Bus System Message Bus.860buildbot # [ 11.604235] fbcon: bochs-drmdrmfb (fb0) is primary device861buildbot # [ 11.614318] ppdev: user-space parallel port driver862buildbot # [ 11.750753] Console: switching to colour frame buffer device 160x50863buildbot # [ 11.821492] bochs-drm 0000:00:02.0: [drm] fb0: bochs-drmdrmfb frame buffer device864buildbot # [ 11.412259] systemd-logind[486]: Watching system buttons on /dev/input/event2 (Power Button)865buildbot # [ 11.588598] systemd-logind[486]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)866buildbot # [ 11.596774] systemd[1]: Stopped target Host and Network Name Lookups.867buildbot # [ 11.602910] systemd[1]: Stopping Host and Network Name Lookups...868buildbot # [ 11.609321] systemd[1]: Stopped target User and Group Name Lookups.869buildbot # [ 11.613990] systemd[1]: Stopping User and Group Name Lookups...870buildbot # [ 11.615950] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...871buildbot # [ 11.619654] systemd[1]: nscd.service: Deactivated successfully.872buildbot # [ 11.623527] systemd[1]: Stopped Name Service Cache Daemon (nsncd).873buildbot # [ 11.628459] systemd[1]: Starting Name Service Cache Daemon (nsncd)...874buildbot # [ 11.633727] systemd[1]: Finished resolvconf update.875buildbot # [ 11.635886] systemd[1]: Reached target Preparation for Network.876buildbot # [ 11.639772] systemd[1]: Starting DHCP Client...877buildbot # [ 11.644139] systemd[1]: Starting Address configuration of eth1...878buildbot # [ 11.645772] systemd[1]: Starting Extra networking commands....879buildbot # [ 11.648921] systemd-logind[486]: New seat seat0.880buildbot # [ 11.651148] systemd-logind[486]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)881buildbot # [ 11.653786] systemd[1]: Started User Login Management.882buildbot # [ 11.657855] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.883buildbot # [ 11.662953] systemd[1]: Stopped Virtual Console Setup.884buildbot # [ 11.712538] nsncd[542]: Jul 05 06:00:20.621 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"885buildbot # [ 11.724178] systemd[1]: Starting linger-users.service...886buildbot # [ 11.731755] systemd[1]: Starting Virtual Console Setup...887buildbot # [ 11.736129] systemd[1]: Started Name Service Cache Daemon (nsncd).888buildbot # [ 11.762161] systemd[1]: Reached target Host and Network Name Lookups.889buildbot # [ 11.769630] systemd[1]: Reached target User and Group Name Lookups.890buildbot # [ 11.786787] network-addresses-eth1-start[553]: adding address 192.168.1.1/24... done891buildbot # [ 11.820719] network-addresses-eth1-start[553]: adding address 2001:db8:1::1/64... done892buildbot # [ 11.863496] systemd[1]: Finished Address configuration of eth1.893buildbot # [ 11.870953] systemd[1]: linger-users.service: Deactivated successfully.894buildbot # [ 11.876138] systemd[1]: Finished linger-users.service.895buildbot # [ 11.957158] systemd[1]: Finished Extra networking commands..896buildbot # [ 11.961119] systemd[1]: Reached target Network.897buildbot # [ 11.967925] dhcpcd[558]: dhcpcd-10.3.2 starting898buildbot # [ 11.976829] systemd[1]: Starting Nginx Web Server...899buildbot # [ 11.980553] dhcpcd[628]: dev: loaded udev900buildbot # [ 11.991899] systemd[1]: Starting PostgreSQL Server...901buildbot # [ 12.003417] systemd[1]: Starting SSH Daemon...902buildbot # [ 12.251814] kvm_amd: TSC scaling supported903buildbot # [ 12.254151] kvm_amd: Nested Virtualization enabled904buildbot # [ 12.256973] kvm_amd: Nested Paging enabled905buildbot # [ 12.259290] kvm_amd: LBR virtualization supported906buildbot # [ 12.263022] kvm_amd: Virtual VMLOAD VMSAVE supported907buildbot # [ 12.266040] 8021q: 802.1Q VLAN Support v1.8908buildbot # [ 12.268649] kvm_amd: Virtual GIF supported909buildbot # [ 12.026095] systemd[1]: Starting Permit User Sessions...910buildbot # [ 12.273077] 8021q: adding VLAN 0 to HW filter on device eth1911buildbot # [ 12.275352] kvm_amd: Virtual NMI enabled912buildbot # [ 12.126541] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.913buildbot # [ 12.413299] EDAC MC: Ver: 3.0.0914buildbot # [ 12.175105] systemd[1]: Finished Permit User Sessions.915buildbot # [ 12.200058] systemd[1]: Started Getty on tty1.916buildbot # [ 12.201396] systemd[1]: Reached target Login Prompts.917buildbot # [ 12.212776] sshd[632]: Server listening on 0.0.0.0 port 22.918buildbot # [ 12.215467] sshd[632]: Server listening on :: port 22.919buildbot # [ 12.220627] systemd[1]: Started SSH Daemon.920buildbot # [ 12.240128] systemd[1]: Starting Setup git test repository with scheduled effects...921buildbot # [ 12.616704] cfg80211: Loading compiled-in X.509 certificates for regulatory database922buildbot # [ 12.655411] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'923buildbot # [ 12.660618] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'924buildbot # [ 12.667697] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2925buildbot # [ 12.669312] cfg80211: failed to load regulatory.db926buildbot # [ 12.446295] setup-git-repo-start[650]: hint: Using 'master' as the name for the initial branch. This default branch name927buildbot # [ 12.450466] setup-git-repo-start[650]: hint: will change to "main" in Git 3.0. To configure the initial branch name928buildbot # [ 12.456398] setup-git-repo-start[650]: hint: to use in all of your new repositories, which will suppress this warning,929buildbot # [ 12.460093] setup-git-repo-start[650]: hint: call:930buildbot # [ 12.461705] setup-git-repo-start[650]: hint:931buildbot # [ 12.464652] setup-git-repo-start[650]: hint: git config --global init.defaultBranch <name>932buildbot # [ 12.470169] setup-git-repo-start[650]: hint:933buildbot # [ 12.471371] setup-git-repo-start[650]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and934buildbot # [ 12.474669] setup-git-repo-start[650]: hint: 'development'. The just-created branch can be renamed via this command:935buildbot # [ 12.477508] setup-git-repo-start[650]: hint:936buildbot # [ 12.480657] setup-git-repo-start[650]: hint: git branch -m <name>937buildbot # [ 12.485981] setup-git-repo-start[650]: hint:938buildbot # [ 12.488600] setup-git-repo-start[650]: hint: Disable this message with "git config set advice.defaultBranchName false"939buildbot # [ 12.494349] setup-git-repo-start[650]: Initialized empty Git repository in /srv/repos/test-flake.git/940buildbot # [ 12.522268] systemd-vconsole-setup[576]: Configuration of first virtual console was skipped, ignoring remaining ones.941buildbot # [ 12.533152] systemd[1]: Finished Virtual Console Setup.942buildbot # [ 12.541323] nginx-pre-start[645]: nginx: the configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf syntax is ok943buildbot # [ 12.544546] nginx-pre-start[645]: nginx: configuration file /nix/store/nljfc3np1hlmc33l0nkyf74jzbi0wmrf-nginx.conf test is successful944buildbot # [ 12.562130] systemd[1]: Started Nginx Web Server.945buildbot # [ 12.565710] postgresql-pre-start[647]: The files belonging to this database system will be owned by user "postgres".946buildbot # [ 12.570188] postgresql-pre-start[647]: This user must also own the server process.947buildbot # [ 12.587264] postgresql-pre-start[647]: The database cluster will be initialized with locale "en_US.UTF-8".948buildbot # [ 12.589587] postgresql-pre-start[647]: The default database encoding has accordingly been set to "UTF8".949buildbot # [ 12.592158] postgresql-pre-start[647]: The default text search configuration will be set to "english".950buildbot # [ 12.595186] postgresql-pre-start[647]: Data page checksums are disabled.951buildbot # [ 12.598139] postgresql-pre-start[647]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok952buildbot # [ 12.601200] postgresql-pre-start[647]: creating subdirectories ... ok953buildbot # [ 12.604269] postgresql-pre-start[647]: selecting dynamic shared memory implementation ... posix954buildbot # [ 12.608480] setup-git-repo-start[672]: hint: Using 'master' as the name for the initial branch. This default branch name955buildbot # [ 12.612897] setup-git-repo-start[672]: hint: will change to "main" in Git 3.0. To configure the initial branch name956buildbot # [ 12.616360] setup-git-repo-start[672]: hint: to use in all of your new repositories, which will suppress this warning,957buildbot # [ 12.619708] setup-git-repo-start[672]: hint: call:958buildbot # [ 12.622128] setup-git-repo-start[672]: hint:959buildbot # [ 12.623682] setup-git-repo-start[672]: hint: git config --global init.defaultBranch <name>960buildbot # [ 12.627172] setup-git-repo-start[672]: hint:961buildbot # [ 12.630069] setup-git-repo-start[672]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and962buildbot # [ 12.632376] setup-git-repo-start[672]: hint: 'development'. The just-created branch can be renamed via this command:963buildbot # [ 12.636463] setup-git-repo-start[672]: hint:964buildbot # [ 12.637619] setup-git-repo-start[672]: hint: git branch -m <name>965buildbot # [ 12.640330] setup-git-repo-start[672]: hint:966buildbot # [ 12.643415] setup-git-repo-start[672]: hint: Disable this message with "git config set advice.defaultBranchName false"967buildbot # [ 12.646372] setup-git-repo-start[672]: Initialized empty Git repository in /tmp/test-flake/.git/968buildbot # [ 12.899995] 8021q: adding VLAN 0 to HW filter on device eth0969buildbot: (finished: waiting for unit sshd.service, in 13.84 seconds)970buildbot: waiting for unit setup-git-repo.service971buildbot # [ 12.660132] dhcpcd[628]: eth0: waiting for carrier972buildbot # [ 12.663394] dhcpcd[628]: eth0: carrier acquired973buildbot # [ 12.683190] dhcpcd[628]: DUID 00:01:00:01:31:dc:af:75:52:54:00:12:34:56974buildbot # [ 12.687169] dhcpcd[628]: eth0: IAID 00:12:34:56975buildbot # [ 12.688624] dhcpcd[628]: eth0: adding address fe80::5054:ff:fe12:3456976buildbot # [ 12.775567] postgresql-pre-start[647]: selecting default "max_connections" ... 100977buildbot # [ 12.780383] setup-git-repo-start[691]: [master (root-commit) 356b423] Initial commit with scheduled effects978buildbot # [ 12.783580] setup-git-repo-start[691]: 3 files changed, 131 insertions(+)979buildbot # [ 12.786907] setup-git-repo-start[691]: create mode 100644 effects-lib.nix980buildbot # [ 12.789149] setup-git-repo-start[691]: create mode 100644 flake.lock981buildbot # [ 12.791125] setup-git-repo-start[691]: create mode 100644 flake.nix982buildbot # [ 12.870386] postgresql-pre-start[647]: selecting default "shared_buffers" ... 128MB983buildbot # [ 12.901664] setup-git-repo-start[697]: To /srv/repos/test-flake.git984buildbot # [ 12.903328] setup-git-repo-start[697]: * [new branch] master -> master985buildbot # [ 12.906117] setup-git-repo-start[697]: branch 'master' set up to track 'origin/master'.986buildbot # [ 12.914633] systemd[1]: Finished Setup git test repository with scheduled effects.987buildbot # [ 13.418540] dhcpcd[628]: eth0: soliciting a DHCP lease988buildbot # [ 13.683259] NET: Registered PF_PACKET protocol family989buildbot # [ 13.444751] dhcpcd[628]: eth0: offered 10.0.2.15 from 10.0.2.2990buildbot # [ 13.447199] dhcpcd[628]: eth0: probing address 10.0.2.15/24991buildbot: (finished: waiting for unit setup-git-repo.service, in 1.19 seconds)992buildbot: waiting for unit multi-user.target993buildbot # [ 14.616302] dhcpcd[628]: eth0: soliciting an IPv6 router994buildbot # [ 14.618486] dhcpcd[628]: eth0: Router Advertisement from fe80::2995buildbot # [ 14.620334] dhcpcd[628]: eth0: adding address fec0::5054:ff:fe12:3456/64996buildbot # [ 14.622281] dhcpcd[628]: eth0: adding route to fec0::/64997buildbot # [ 14.623845] dhcpcd[628]: eth0: adding default route via fe80::2998buildbot # [ 15.220768] postgresql-pre-start[647]: selecting default time zone ... UTC999buildbot # [ 15.226321] postgresql-pre-start[647]: creating configuration files ... ok1000buildbot # [ 15.475782] postgresql-pre-start[647]: running bootstrap script ... ok1001buildbot # [ 16.092187] postgresql-pre-start[647]: performing post-bootstrap initialization ... ok1002buildbot # [ 16.331913] postgresql-pre-start[647]: syncing data to disk ... ok1003buildbot # [ 16.333560] postgresql-pre-start[647]: initdb: warning: enabling "trust" authentication for local connections1004buildbot # [ 16.335944] postgresql-pre-start[647]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.1005buildbot # [ 16.339953] postgresql-pre-start[647]: Success. You can now start the database server using:1006buildbot # [ 16.342537] postgresql-pre-start[647]: pg_ctl -D /var/lib/postgresql/17 -l logfile start1007buildbot # [ 16.464689] postgres[755]: [755] LOG: starting PostgreSQL 17.10 on x86_64-pc-linux-gnu, compiled by clang version 21.1.8, 64-bit1008buildbot # [ 16.478056] postgres[755]: [755] LOG: listening on IPv6 address "::1", port 54321009buildbot # [ 16.480187] postgres[755]: [755] LOG: listening on IPv4 address "127.0.0.1", port 54321010buildbot # [ 16.483104] postgres[755]: [755] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"1011buildbot # [ 16.496136] postgres[761]: [761] LOG: database system was shut down at 2026-07-05 06:00:24 GMT1012buildbot # [ 16.505863] postgres[755]: [755] LOG: database system is ready to accept connections1013buildbot # [ 16.511728] systemd[1]: Started PostgreSQL Server.1014buildbot # [ 16.517572] systemd[1]: Starting PostgreSQL Setup Scripts...1015buildbot # [ 16.714411] postgresql-setup-start[772]: CREATE DATABASE1016buildbot # [ 16.762858] postgresql-setup-start[777]: CREATE ROLE1017buildbot # [ 16.786985] postgresql-setup-start[779]: ALTER DATABASE1018buildbot # [ 16.793884] systemd[1]: Finished PostgreSQL Setup Scripts.1019buildbot # [ 16.796284] systemd[1]: Reached target PostgreSQL.1020buildbot # [ 16.801584] systemd[1]: Starting Buildbot Continuous Integration Server....1021buildbot # [ 16.860325] buildbot-master-pre-start[784]: mkdir: created directory '/var/lib/buildbot/master'1022buildbot # [ 19.004902] dhcpcd[628]: eth0: leased 10.0.2.15 for 86400 seconds1023buildbot # [ 19.007770] dhcpcd[628]: eth0: adding route to 10.0.2.0/241024buildbot # [ 19.009531] dhcpcd[628]: eth0: adding default route via 10.0.2.21025buildbot # [ 19.133375] systemd[1]: Started DHCP Client.1026buildbot # [ 23.584850] buildbot-master-pre-start[786]: updating existing installation1027buildbot # [ 23.588280] buildbot-master-pre-start[786]: not touching existing buildbot.tac1028buildbot # [ 23.590138] buildbot-master-pre-start[786]: creating buildbot.tac.new instead1029buildbot # [ 23.591817] buildbot-master-pre-start[786]: creating /var/lib/buildbot/master/master.cfg.sample1030buildbot # [ 23.593825] buildbot-master-pre-start[786]: creating database (postgresql://@/buildbot)1031buildbot # [ 23.595769] buildbot-master-pre-start[786]: buildmaster configured in /var/lib/buildbot/master1032buildbot # [ 23.773418] systemd[1]: Started Buildbot Continuous Integration Server..1033buildbot # [ 23.779942] systemd[1]: Started Buildbot Worker..1034buildbot # [ 23.781912] systemd[1]: Reached target Multi-User System.1035buildbot # [ 23.784936] systemd[1]: Startup finished in 954ms (kernel) + 5.189s (initrd) + 17.640s (userspace) = 23.784s.1036buildbot: (finished: waiting for unit multi-user.target, in 10.03 seconds)1037subtest: Master and worker services start1038buildbot: waiting for unit buildbot-master.service1039buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds)1040buildbot: waiting for unit buildbot-worker.service1041buildbot: (finished: waiting for unit buildbot-worker.service, in 0.09 seconds)1042buildbot: waiting for TCP port 8010 on localhost1043buildbot # [ 25.489300] twistd[895]: Starting worker local-worker-0001044buildbot # [ 25.492434] twistd[895]: 2026-07-05T06:00:33+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...1045buildbot # [ 25.495645] twistd[895]: 2026-07-05T06:00:34+0000 [-] Loaded.1046buildbot # [ 25.497174] twistd[895]: 2026-07-05T06:00:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1047buildbot # [ 25.501202] twistd[895]: 2026-07-05T06:00:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1048buildbot # [ 25.504740] twistd[895]: 2026-07-05T06:00:34+0000 [-] Starting Worker -- version: 2026.06.261049buildbot # [ 25.507188] twistd[895]: 2026-07-05T06:00:34+0000 [-] recording hostname in twistd.hostname1050buildbot # [ 25.509717] twistd[895]: 2026-07-05T06:00:34+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x793009218590>1051buildbot # [ 25.521901] twistd[895]: 2026-07-05T06:00:34+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x793009218ad0> in 2.1824365736547033 seconds.1052buildbot # [ 25.526738] twistd[895]: 2026-07-05T06:00:34+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x793009218590>1053buildbot # [ 27.712405] twistd[895]: 2026-07-05T06:00:36+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x793009218590>1054buildbot # [ 27.718206] twistd[895]: 2026-07-05T06:00:36+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0x793009218ad0> in 3.068822411716627 seconds.1055buildbot # [ 27.723151] twistd[895]: 2026-07-05T06:00:36+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0x793009218590>1056buildbot # [ 27.808465] twistd[894]: 2026-07-05T06:00:33+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...1057buildbot # [ 27.811536] twistd[894]: 2026-07-05T06:00:36+0000 [-] Loaded.1058buildbot # [ 27.813154] twistd[894]: 2026-07-05T06:00:36+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13 3.13.13) starting up.1059buildbot # [ 27.817372] twistd[894]: 2026-07-05T06:00:36+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.1060buildbot # [ 27.820556] twistd[894]: 2026-07-05T06:00:36+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.01061buildbot # [ 27.834578] twistd[894]: 2026-07-05T06:00:36+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1062buildbot # [ 28.869462] twistd[894]: 2026-07-05T06:00:37+0000 [-] Setting up database with URL 'postgresql://@/buildbot'1063buildbot # [ 28.986206] twistd[894]: 2026-07-05T06:00:37+0000 [-] adding 9 new builders, removing 01064buildbot # [ 29.118757] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 3 new services, removing 01065buildbot # [ 29.248179] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 1 new change_sources, removing 01066buildbot # [ 29.254092] twistd[894]: 2026-07-05T06:00:38+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1067buildbot # [ 29.267407] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 14 new schedulers, removing 01068buildbot # [ 29.453952] twistd[894]: 2026-07-05T06:00:38+0000 [-] BuildbotSite starting on 80101069buildbot # [ 29.456632] twistd[894]: 2026-07-05T06:00:38+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0x76c291fb8ad0>1070buildbot # [ 29.459982] twistd[894]: 2026-07-05T06:00:38+0000 [-] adding 5 new workers, removing 01071buildbot # [ 29.474749] twistd[894]: 2026-07-05T06:00:38+0000 [-] PBServerFactory starting on 99891072buildbot # [ 29.476632] twistd[894]: 2026-07-05T06:00:38+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0x76c291fb9550>1073buildbot # [ 29.509316] twistd[894]: 2026-07-05T06:00:38+0000 [-] Starting Worker -- version: 2026.06.261074buildbot # [ 29.511733] twistd[894]: 2026-07-05T06:00:38+0000 [-] recording hostname in twistd.hostname1075buildbot # [ 29.514218] twistd[894]: 2026-07-05T06:00:38+0000 [-] message from master: attached1076buildbot # [ 29.518103] twistd[894]: 2026-07-05T06:00:38+0000 [-] Got workerinfo from '__Janitor'1077buildbot # [ 29.527907] twistd[894]: 2026-07-05T06:00:38+0000 [-] bot attached1078buildbot # [ 29.530483] twistd[894]: 2026-07-05T06:00:38+0000 [-] Worker __Janitor attached to __Janitor1079buildbot # [ 29.532919] twistd[894]: 2026-07-05T06:00:38+0000 [-] message from master: attached1080buildbot # [ 29.578945] twistd[894]: 2026-07-05T06:00:38+0000 [-] BuildMaster is running1081buildbot # [ 29.588332] sshd-session[964]: Accepted publickey for root from ::1 port 35544 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81082buildbot # [ 29.607125] sshd-session[964]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1083buildbot # [ 29.654671] systemd[1]: Created slice Slice /user/0.1084buildbot # [ 29.660365] systemd[1]: Starting User Runtime Directory /run/user/0...1085buildbot # [ 29.674487] systemd-logind[486]: New session '1' of user 'root' with class 'user' and type 'tty'.1086buildbot # [ 29.714146] systemd[1]: Finished User Runtime Directory /run/user/0.1087buildbot # [ 29.721222] systemd[1]: Starting User Manager for UID 0...1088buildbot # [ 29.768292] (systemd)[970]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1089buildbot # [ 29.777105] systemd-logind[486]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1090buildbot # [ 30.138229] systemd[970]: Queued start job for default target Main User Target.1091buildbot # [ 30.142976] systemd[970]: Created slice User Application Slice.1092buildbot # [ 30.144768] systemd[970]: Started Daily Cleanup of User's Temporary Directories.1093buildbot # [ 30.147198] systemd[970]: Reached target Paths.1094buildbot # [ 30.148728] systemd[970]: Reached target Timers.1095buildbot # [ 30.153166] systemd[970]: Starting D-Bus User Message Bus Socket...1096buildbot # [ 30.156548] systemd[970]: Starting Create User Files and Directories...1097buildbot # [ 30.205766] systemd[970]: Finished Create User Files and Directories.1098buildbot # [ 30.247596] systemd[970]: Listening on D-Bus User Message Bus Socket.1099buildbot # [ 30.249564] systemd[970]: Reached target Sockets.1100buildbot # [ 30.253274] systemd[970]: Reached target Basic System.1101buildbot # [ 30.254901] systemd[970]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1102buildbot # [ 30.257676] systemd[1]: Started User Manager for UID 0.1103buildbot # [ 30.260215] systemd[970]: Reached target Main User Target.1104buildbot # [ 30.261886] systemd[970]: Startup finished in 443ms.1105buildbot # [ 30.263305] systemd[1]: Started Session 1 of User root.1106buildbot # [ 30.311174] sshd-session[982]: Received disconnect from ::1 port 35544:11: disconnected by user1107buildbot # [ 30.313405] sshd-session[982]: Disconnected from user root ::1 port 355441108buildbot # [ 30.315365] sshd-session[964]: pam_unix(sshd:session): session closed for user root1109buildbot # [ 30.328854] systemd[1]: session-1.scope: Deactivated successfully.1110buildbot # [ 30.333645] systemd-logind[486]: Session 1 logged out. Waiting for processes to exit.1111buildbot # [ 30.337162] systemd-logind[486]: Removed session 1.1112buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1113buildbot: (finished: waiting for TCP port 8010 on localhost, in 6.39 seconds)1114buildbot: waiting for success: curl --fail --head http://localhost:80101115buildbot # [ 30.528964] sshd-session[987]: Accepted publickey for root from ::1 port 35558 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81116buildbot # [ 30.544526] sshd-session[987]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1117buildbot # % Total % Received % Xferd Average Speed Time Time [ 30.565142] systemd-logind[486]: New session '3' of user 'root' with class 'user' and type 'tty'.1118buildbot # [ 30.568141] systemd[1]: Started Session 3 of User root.1119buildbot # Time Current1120buildbot # Dload Upload Total Spent Left Speed1121buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01122buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.21 seconds)1123(finished: subtest: Master and worker services start, in 6.78 seconds)1124subtest: Project is registered1125buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1126buildbot # [ 30.667483] sshd-session[998]: Received disconnect from ::1 port 35558:11: disconnected by user1127buildbot # [ 30.670692] sshd-session[998]: Disconnected from user root ::1 port 355581128buildbot # [ 30.673644] sshd-session[987]: pam_unix(sshd:session): session closed for user root1129buildbot # [ 30.682620] systemd[1]: session-3.scope: Deactivated successfully.1130buildbot # [ 30.686682] systemd-logind[486]: Session 3 logged out. Waiting for processes to exit.1131buildbot # [ 30.692515] systemd-logind[486]: Removed session 3.1132buildbot # [ 30.725053] twistd[894]: 2026-07-05T06:00:39+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1133buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1134buildbot # Dload Upload Total Spent Left Speed1135buildbot # 0 0 0 0 0 0 0 0 0100 266 100 [ 30.791332] twistd[895]: 2026-07-05T06:00:39+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0x793009218590>1136buildbot # 266 0 0 7353 0 [ 30.806775] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=50340)1137buildbot # 0100 26[ 30.812939] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1138buildbot # 6 100 266 0 0 4520 0 0100[ 30.828194] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1139buildbot # 266 100 266 0 0 3513 0 [ 30.843695] twistd[894]: 2026-07-05T06:00:39+0000 [-] bot attached1140buildbot # 01141buildbot # [ 30.852130] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1142buildbot # [ 30.854947] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1143buildbot # [ 30.857605] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1144buildbot # [ 30.860321] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1145buildbot # [ 30.863629] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1146buildbot # [ 30.866597] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1147buildbot # [ 30.869908] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1148buildbot # [ 30.872947] twistd[894]: 2026-07-05T06:00:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1149buildbot # [ 30.876283] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1150buildbot # [ 30.879546] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1151buildbot # [ 30.881908] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1152buildbot # [ 30.885085] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1153buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.22 seconds)1154(finished: subtest: Project is registered, in 0.22 seconds)1155subtest: CLI list-schedules works1156buildbot: must succeed: 1157 cd /tmp/test-flake1158 buildbot-effects list-schedules1159 1160buildbot # [ 30.887528] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1161buildbot # [ 30.891069] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1162buildbot # [ 30.893162] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1163buildbot # [ 30.896256] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] message from master: attached1164buildbot # [ 30.903509] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] Connected to buildmaster; worker is ready1165buildbot # [ 30.905907] twistd[895]: 2026-07-05T06:00:39+0000 [Broker,client] sending application-level keepalives every 600 seconds1166buildbot: (finished: must succeed: 1167 cd /tmp/test-flake1168 buildbot-effects list-schedules1169 , in 0.62 seconds)1170(finished: subtest: CLI list-schedules works, in 0.62 seconds)1171subtest: Push a new commit to trigger build1172buildbot: must succeed: 1173 cd /tmp/test-flake1174 echo "# trigger rebuild" >> flake.nix1175 git add flake.nix1176 git commit -m "Trigger build"1177 git push origin master1178 1179buildbot # Enumerating objects: 5, done.1180buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1181buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1182buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 98.00 KiB/s, done.1183buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1184buildbot # To /srv/repos/test-flake.git1185buildbot # 356b423..c6b51b4 master -> master1186buildbot: (finished: must succeed: 1187 cd /tmp/test-flake1188 echo "# trigger rebuild" >> flake.nix1189 git add flake.nix1190 git commit -m "Trigger build"1191 git push origin master1192 , in 0.15 seconds)1193(finished: subtest: Push a new commit to trigger build, in 0.15 seconds)1194subtest: Wait for nix-eval build to complete1195buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1196buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1197buildbot # Dload Upload Total Spent Left Speed1198buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1215 0 0100 51 100 51 0 0 967 0 0100 51 100 51 0 0 814 0 01199buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1200buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1201buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1202buildbot # Dload Upload Total Spent Left Speed1203buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1145 0 0100 51 100 51 0 0 930 0 0100 51 100 51 0 0 786 0 01204buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1205buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1206buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1207buildbot # Dload Upload Total Spent Left Speed1208buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1184 0 0100 51 100 51 0 0 960 0 0100 51 100 51 0 0 810 0 01209buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.14 seconds)1210buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1211buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1212buildbot # Dload Upload Total Spent Left Speed1213buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1349 0 0100 51 100 51 0 0 1069 0 0100 51 100 51 0 0 886 0 01214buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1215buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1216buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1217buildbot # Dload Upload Total Spent Left Speed1218buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1294 0 0100 51 100 51 0 0 1026 0 0100 51 100 51 0 0 853 0 01219buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1220buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1221buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1222buildbot # Dload Upload Total Spent Left Speed1223buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1356 0 0100 51 100 51 0 0 1067 0 0100 51 100 51 0 0 885 0 01224buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1225buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1226buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1227buildbot # Dload Upload Total Spent Left Speed1228buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1280 0 0100 51 100 51 0 0 1026 0 0100 51 100 51 0 0 857 0 01229buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1230buildbot # [ 39.529787] sshd-session[1075]: Accepted publickey for root from ::1 port 41810 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81231buildbot # [ 39.554509] sshd-session[1075]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1232buildbot # [ 39.566306] systemd-logind[486]: New session '4' of user 'root' with class 'user' and type 'tty'.1233buildbot # [ 39.570666] systemd[1]: Started Session 4 of User root.1234buildbot # [ 39.612478] sshd-session[1078]: Received disconnect from ::1 port 41810:11: disconnected by user1235buildbot # [ 39.615120] sshd-session[1078]: Disconnected from user root ::1 port 418101236buildbot # [ 39.616886] sshd-session[1075]: pam_unix(sshd:session): session closed for user root1237buildbot # [ 39.628410] systemd[1]: session-4.scope: Deactivated successfully.1238buildbot # [ 39.634736] systemd-logind[486]: Session 4 logged out. Waiting for processes to exit.1239buildbot # [ 39.637948] systemd-logind[486]: Removed session 4.1240buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1241buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1242buildbot # Dload Upload Total Spent Left Speed1243buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1185 0 0100 51 100 51 0 0 958 0 0100 51 100 51 0 0 808 0 01244buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.12 seconds)1245buildbot # [ 39.835810] sshd-session[1083]: Accepted publickey for root from ::1 port 41822 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81246buildbot # [ 39.852572] sshd-session[1083]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1247buildbot # [ 39.865565] systemd-logind[486]: New session '5' of user 'root' with class 'user' and type 'tty'.1248buildbot # [ 39.868435] systemd[1]: Started Session 5 of User root.1249buildbot # [ 39.921884] sshd-session[1089]: Received disconnect from ::1 port 41822:11: disconnected by user1250buildbot # [ 39.925703] sshd-session[1089]: Disconnected from user root ::1 port 418221251buildbot # [ 39.928875] sshd-session[1083]: pam_unix(sshd:session): session closed for user root1252buildbot # [ 39.935497] systemd[1]: session-5.scope: Deactivated successfully.1253buildbot # [ 39.940138] systemd-logind[486]: Session 5 logged out. Waiting for processes to exit.1254buildbot # [ 39.944402] systemd-logind[486]: Removed session 5.1255buildbot # [ 39.965089] twistd[894]: 2026-07-05T06:00:48+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1256buildbot # [ 39.999604] twistd[894]: 2026-07-05T06:00:48+0000 [-] gitpoller: processing 1 changes: ['c6b51b48f92d4db6d2317e0ac7fcbd335718c573'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1257buildbot # [ 40.086852] twistd[894]: 2026-07-05T06:00:48+0000 [-] added change with revision c6b51b48f92d4db6d2317e0ac7fcbd335718c573 to database1258buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1259buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1260buildbot # Dload Upload Total Spent Left Speed1261buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1390 0 0100 51 100 51 0 0 1093 0 0100 51 100 51 0 0 900 0 01262buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1263buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1264buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1265buildbot # Dload Upload Total Spent Left Speed1266buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1451 0 0100 51 100 51 0 0 1130 0 0100 51 100 51 0 0 926 0 01267buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1268buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1269buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1270buildbot # Dload Upload Total Spent Left Speed1271buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1448 0 0100 51 100 51 0 0 1129 0 0100 51 100 51 0 0 916 0 01272buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1273buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1274buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1275buildbot # Dload Upload Total Spent Left Speed1276buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 1458 0 0100 51 100 51 0 0 1066 0 0100 51 100 51 0 0 821 0 01277buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.17 seconds)1278buildbot # [ 45.141400] twistd[894]: 2026-07-05T06:00:54+0000 [-] added buildset 1 to database1279buildbot # [ 45.294846] twistd[894]: 2026-07-05T06:00:54+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1280buildbot # [ 45.302341] twistd[894]: 2026-07-05T06:00:54+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1281buildbot # [ 45.364831] twistd[894]: 2026-07-05T06:00:54+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1282buildbot # [ 45.370419] twistd[894]: 2026-07-05T06:00:54+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1283buildbot # [ 45.374789] twistd[894]: 2026-07-05T06:00:54+0000 [-] sending ping1284buildbot # [ 45.377427] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] message from master: ping1285buildbot # [ 45.379857] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] ping finished: success1286buildbot # [ 45.406125] twistd[894]: 2026-07-05T06:00:54+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1287buildbot # [ 45.410178] twistd[894]: 2026-07-05T06:00:54+0000 [-] command '['git', '--version']' in dir 'build'1288buildbot # [ 45.412341] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 0): startCommand:shell1289buildbot # [ 45.415076] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1290buildbot # [ 45.417557] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): git --version1291buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1292buildbot # [ 45.421088] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1293buildbot # [ 45.426929] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1294buildbot # [ 45.429389] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1295buildbot # [ 45.431974] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '--version']): using PTY: False1296buildbot # [ 45.451740] twistd[895]: 2026-07-05T06:00:54+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0260741297buildbot # [ 45.455728] twistd[895]: 2026-07-05T06:00:54+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x79300921aba0>1298buildbot # [ 45.484317] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01299buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1300buildbot # Dload Upload Total Spent Left Speed1301buildbot # 0 0 0 0 0 0 0 0 [ 45.552219] twistd[894]: 2026-07-05T06:00:54+0000 [-] <RemoteCommand 'stat' at 130578018452880>: RemoteCommand.run [1]1302buildbot # 0[ 45.557337] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 1): startCommand:stat1303buildbot # [ 45.559431] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1304buildbot # [ 45.564857] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0x793009219400>1305buildbot # [ 45.571822] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 130578018452880> rc=21306buildbot # 100 401 100 401 0 0 5424 0 0[ 45.594361] twistd[894]: 2026-07-05T06:00:54+0000 [-] <RemoteCommand 'mkdir' at 130578017974096>: RemoteCommand.run [2]1307buildbot # 100 401 100 401 0 0 4395 0 0100 401 100 401 0 0 3829 [ 45.614174] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 2): startCommand:mkdir1308buildbot # 0 [ 45.618596] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0x793009219160>1309buildbot # [ 45.625180] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 130578017974096> rc=01310buildbot # 01311buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.22 seconds)1312buildbot # [ 45.638846] twistd[894]: 2026-07-05T06:00:54+0000 [-] <RemoteCommand 'downloadFile' at 130578017975056>: RemoteCommand.run [3]1313buildbot # [ 45.664845] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 3): startCommand:downloadFile1314buildbot # [ 45.669530] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0x7930092181a0>1315buildbot # [ 45.675202] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 130578017975056> rc=01316buildbot # [ 45.683601] twistd[894]: 2026-07-05T06:00:54+0000 [-] <RemoteCommand 'listdir' at 130578017975376>: RemoteCommand.run [4]1317buildbot # [ 45.716106] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 4): startCommand:listdir1318buildbot # [ 45.718271] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0x7930092192b0>1319buildbot # [ 45.723192] twistd[894]: 2026-07-05T06:00:54+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 130578017975376> rc=01320buildbot # [ 45.736114] twistd[894]: 2026-07-05T06:00:54+0000 [-] No git repo present, making full clone1321buildbot # [ 45.738110] twistd[894]: 2026-07-05T06:00:54+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1322buildbot # [ 45.744247] twistd[894]: 2026-07-05T06:00:54+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1323buildbot # [ 45.767951] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command 5): startCommand:shell1324buildbot # [ 45.770479] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1325buildbot # [ 45.777091] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1326buildbot # [ 45.798759] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1327buildbot # [ 45.806201] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1328buildbot # [ 45.812926] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1329buildbot # [ 45.822979] twistd[895]: 2026-07-05T06:00:54+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1330buildbot # [ 46.022498] sshd-session[1127]: Accepted publickey for root from ::1 port 46608 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81331buildbot # [ 46.038906] sshd-session[1127]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1332buildbot # [ 46.051303] systemd-logind[486]: New session '6' of user 'root' with class 'user' and type 'tty'.1333buildbot # [ 46.054248] systemd[1]: Started Session 6 of User root.1334buildbot # [ 46.113391] sshd-session[1130]: Received disconnect from ::1 port 46608:11: disconnected by user1335buildbot # [ 46.115945] sshd-session[1130]: Disconnected from user root ::1 port 466081336buildbot # [ 46.118331] sshd-session[1127]: pam_unix(sshd:session): session closed for user root1337buildbot # [ 46.125528] systemd[1]: session-6.scope: Deactivated successfully.1338buildbot # [ 46.129761] systemd-logind[486]: Session 6 logged out. Waiting for processes to exit.1339buildbot # [ 46.134204] systemd-logind[486]: Removed session 6.1340buildbot # [ 46.150122] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3617621341buildbot # [ 46.156846] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x793009231090>1342buildbot # [ 46.164394] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01343buildbot # [ 46.193574] twistd[894]: 2026-07-05T06:00:55+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']'>: RemoteCommand.run [6]1344buildbot # [ 46.199187] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']' in dir 'build'1345buildbot # [ 46.212980] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 6): startCommand:shell1346buildbot # [ 46.216103] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): RunProcess._startCommand1347buildbot # [ 46.221656] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f c6b51b48f92d4db6d2317e0ac7fcbd335718c5731348buildbot # [ 46.229905] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1349buildbot # [ 46.238313] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): watching logfiles {}1350buildbot # [ 46.243782] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']1351buildbot # [ 46.252624] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): using PTY: False1352buildbot # [ 46.277662] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']): command finished with signal None, exit code 0, elapsedTime: 0.0405221353buildbot # [ 46.284163] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x793009231450>1354buildbot # [ 46.303883] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573']'> rc=01355buildbot # [ 46.332423] twistd[894]: 2026-07-05T06:00:55+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1356buildbot # [ 46.337713] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1357buildbot # [ 46.343539] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 7): startCommand:shell1358buildbot # [ 46.348885] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1359buildbot # [ 46.354201] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1360buildbot # [ 46.361959] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1361buildbot # [ 46.368381] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1362buildbot # [ 46.374136] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1363buildbot # [ 46.382743] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1364buildbot # [ 46.494446] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1464531365buildbot # [ 46.500782] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7930091d6520>1366buildbot # [ 46.506638] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01367buildbot # [ 46.529837] twistd[894]: 2026-07-05T06:00:55+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1368buildbot # [ 46.532435] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1369buildbot # [ 46.536090] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 8): startCommand:shell1370buildbot # [ 46.538851] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1371buildbot # [ 46.541437] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1372buildbot # [ 46.543908] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1373buildbot # [ 46.547748] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1374buildbot # [ 46.552587] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1375buildbot # [ 46.555445] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1376buildbot # [ 46.570683] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0197181377buildbot # [ 46.574202] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7930091d6650>1378buildbot # [ 46.603781] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01379buildbot # [ 46.629625] twistd[894]: 2026-07-05T06:00:55+0000 [-] Got Git revision c6b51b48f92d4db6d2317e0ac7fcbd335718c5731380buildbot # [ 46.632066] twistd[894]: 2026-07-05T06:00:55+0000 [-] <RemoteCommand 'rmdir' at 130578017975696>: RemoteCommand.run [9]1381buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1382buildbot # [ 46.649185] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 9): startCommand:rmdir1383buildbot # [ 46.652565] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1384buildbot # [ 46.656288] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1385buildbot # [ 46.661139] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1386buildbot # [ 46.666192] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1387buildbot # [ 46.670296] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1388buildbot # [ 46.675321] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1389buildbot # [ 46.698128] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0272501390buildbot # [ 46.703219] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0x79300921b0e0>1391buildbot # [ 46.728465] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 130578017975696> rc=01392buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1393buildbot # [ 46.766261] twistd[894]: 2026-07-05T06:00:55+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1394buildbot # Dload Upload Total Spent Left Speed1395buildbot # 0 0 0 0 0 0 0 0 [ 46.806493] twistd[894]: 2026-07-05T06:00:55+0000 [-] step 'git' complete: success (None)1396buildbot # 0100 401 100 401 0 0 5243 0 [ 46.827177] twistd[894]: 2026-07-05T06:00:55+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x76c293bb52b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x76c293bb6660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x76c293bb6660>)])1397buildbot # 0100 401 100 401 0 0 [ 46.857349] twistd[894]: 2026-07-05T06:00:55+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1398buildbot # [ 46.860816] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1399buildbot # [ 46.864899] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 10): startCommand:shell1400buildbot # 3704 0 [ 46.873157] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1401buildbot # [ 46.876609] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1402buildbot # [ 46.880784] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1403buildbot # [ 46.885346] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1404buildbot # 0100 [ 46.891267] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1405buildbot # [ 46.897591] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1406buildbot # 401 100 401 0 0 2695 0 01407buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.28 seconds)1408buildbot # [ 46.930665] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0342451409buildbot # [ 46.935126] twistd[895]: 2026-07-05T06:00:55+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x7930097fbe30>1410buildbot # [ 46.949945] twistd[894]: 2026-07-05T06:00:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01411buildbot # [ 46.957635] twistd[894]: 2026-07-05T06:00:55+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1412buildbot # [ 46.965159] twistd[894]: 2026-07-05T06:00:55+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1413buildbot # [ 46.974100] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command 11): startCommand:shell1414buildbot # [ 46.976251] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1415buildbot # [ 46.983636] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1416buildbot # [ 46.995228] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1417buildbot # [ 47.006599] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1418buildbot # [ 47.013956] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1419buildbot # [ 47.026659] twistd[895]: 2026-07-05T06:00:55+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1420buildbot # [ 47.172935] systemd[1]: Started Nix Daemon.1421buildbot # [ 47.285721] nix-daemon[1175]: accepted connection from pid 1174, user buildbot-worker1422buildbot # [ 47.322367] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.3168701423buildbot # [ 47.331259] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x793009238af0>1424buildbot # [ 47.337409] twistd[894]: 2026-07-05T06:00:56+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01425buildbot # [ 47.372650] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['x86_64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0x76c293bb52b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0x76c293bb6660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0x76c293bb6660>)]1426buildbot # [ 47.392615] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'Evaluate flake' complete: success (None)1427buildbot # [ 47.420681] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1428buildbot # [ 47.435848] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'build flake' complete: success (None)1429buildbot # [ 47.450061] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x76c293a0cae0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x76c293a0cb80>)): []1430buildbot # [ 47.462562] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'Process skipped builds' complete: skipped (None)1431buildbot # [ 47.476115] twistd[894]: 2026-07-05T06:00:56+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1432buildbot # [ 47.479922] twistd[894]: 2026-07-05T06:00:56+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1433buildbot # [ 47.486099] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command 12): startCommand:shell1434buildbot # [ 47.489218] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1435buildbot # [ 47.492989] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1436buildbot # [ 47.497636] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1437buildbot # [ 47.504216] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1438buildbot # [ 47.508073] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1439buildbot # [ 47.513320] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1440buildbot # [ 47.530798] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0278111441buildbot # [ 47.535552] twistd[895]: 2026-07-05T06:00:56+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x793009238f30>1442buildbot # [ 47.563428] twistd[894]: 2026-07-05T06:00:56+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01443buildbot # [ 47.591500] twistd[894]: 2026-07-05T06:00:56+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1444buildbot # [ 47.602705] twistd[894]: 2026-07-05T06:00:56+0000 [-] step 'Cleanup drv paths' complete: success (None)1445buildbot # [ 47.616812] twistd[894]: 2026-07-05T06:00:56+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1446buildbot # [ 47.621227] twistd[894]: 2026-07-05T06:00:56+0000 [-] command '['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1447buildbot # [ 47.626813] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command 13): startCommand:shell1448buildbot # [ 47.630090] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1449buildbot # [ 47.634494] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev c6b51b48f92d4db6d2317e0ac7fcbd335718c573 --branch master --repo test-flake1450buildbot # [ 47.640343] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1451buildbot # [ 47.647749] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1452buildbot # [ 47.652054] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', b'--branch', b'master', b'--repo', b'test-flake']1453buildbot # [ 47.658377] twistd[895]: 2026-07-05T06:00:56+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1454buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1455buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1456buildbot # Dload Upload Total Spent Left Speed1457buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 7432 0 0100 401 100 401 0 0 5783 0 0100 401 100 401 0 0 4794 0 01458buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.16 seconds)1459buildbot # [ 48.099826] nix-daemon[1175]: accepted connection from pid 1184, user buildbot-worker1460buildbot # [ 48.134116] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4870711461buildbot # [ 48.139153] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x793009248550>1462buildbot # [ 48.145274] twistd[894]: 2026-07-05T06:00:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']'> rc=01463buildbot # [ 48.253210] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x76c293a0d300>, logEnviron=False)): []1464buildbot # [ 48.267124] twistd[894]: 2026-07-05T06:00:57+0000 [-] step 'Evaluate effects' complete: success (None)1465buildbot # [ 48.282411] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1466buildbot # [ 48.291990] twistd[894]: 2026-07-05T06:00:57+0000 [-] step 'Buildbot effect' complete: success (None)1467buildbot # [ 48.305756] twistd[894]: 2026-07-05T06:00:57+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1468buildbot # [ 48.310277] twistd[894]: 2026-07-05T06:00:57+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1469buildbot # [ 48.315630] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command 14): startCommand:shell1470buildbot # [ 48.318855] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1471buildbot # [ 48.323574] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev c6b51b48f92d4db6d2317e0ac7fcbd335718c573 --branch master --repo test-flake1472buildbot # [ 48.330689] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1473buildbot # [ 48.338211] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1474buildbot # [ 48.342657] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', b'--branch', b'master', b'--repo', b'test-flake']1475buildbot # [ 48.349366] twistd[895]: 2026-07-05T06:00:57+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1476buildbot # [ 48.717958] nix-daemon[1175]: accepted connection from pid 1196, user buildbot-worker1477buildbot # [ 48.752496] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.4141301478buildbot # [ 48.757607] twistd[895]: 2026-07-05T06:00:57+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0x793009248850>1479buildbot # [ 48.764987] twistd[894]: 2026-07-05T06:00:57+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'c6b51b48f92d4db6d2317e0ac7fcbd335718c573', '--branch', 'master', '--repo', 'test-flake']'> rc=01480buildbot # [ 48.809481] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0x76c293bb4d70>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0x76c293a0d4e0>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0x76c293a0d580>, logEnviron=False)): []1481buildbot # [ 48.827993] twistd[894]: 2026-07-05T06:00:57+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1482buildbot # [ 48.830631] twistd[894]: 2026-07-05T06:00:57+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1483buildbot # [ 48.843107] twistd[894]: 2026-07-05T06:00:57+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1484buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1485buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1486buildbot # Dload Upload Total Spent Left Speed1487buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 11159 0 0100 411 100 411 0 0 8747 0 0100 411 100 411 0 0 7222 0 01488buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.15 seconds)1489(finished: subtest: Wait for nix-eval build to complete, in 17.58 seconds)1490subtest: Schedule cache is created1491buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1492buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.03 seconds)1493buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1494buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.04 seconds)1495(finished: subtest: Schedule cache is created, in 0.06 seconds)1496subtest: Nightly schedulers are created1497buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1498buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1499buildbot # Dload Upload Total Spent Left Speed1500buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39273 0 0100 3793 100 3793 0 0 35493 0 0100 3793 100 3793 0 0 32436 0 01501buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds)1502buildbot # [ 49.504662] sshd-session[1222]: Accepted publickey for root from ::1 port 46622 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81503buildbot # [ 49.520557] sshd-session[1222]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1504buildbot # [ 49.531154] systemd-logind[486]: New session '7' of user 'root' with class 'user' and type 'tty'.1505buildbot # [ 49.536467] systemd[1]: Started Session 7 of User root.1506buildbot # [ 49.579614] sshd-session[1235]: Received disconnect from ::1 port 46622:11: disconnected by user1507buildbot # [ 49.582378] sshd-session[1235]: Disconnected from user root ::1 port 466221508buildbot # [ 49.585691] sshd-session[1222]: pam_unix(sshd:session): session closed for user root1509buildbot # [ 49.595165] systemd[1]: session-7.scope: Deactivated successfully.1510buildbot # [ 49.601897] systemd-logind[486]: Session 7 logged out. Waiting for processes to exit.1511buildbot # [ 49.604480] systemd-logind[486]: Removed session 7.1512buildbot # [ 49.800431] sshd-session[1240]: Accepted publickey for root from ::1 port 46634 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81513buildbot # [ 49.820120] sshd-session[1240]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1514buildbot # [ 49.832884] systemd-logind[486]: New session '8' of user 'root' with class 'user' and type 'tty'.1515buildbot # [ 49.835898] systemd[1]: Started Session 8 of User root.1516buildbot # [ 49.888614] sshd-session[1243]: Received disconnect from ::1 port 46634:11: disconnected by user1517buildbot # [ 49.890957] sshd-session[1243]: Disconnected from user root ::1 port 466341518buildbot # [ 49.893055] sshd-session[1240]: pam_unix(sshd:session): session closed for user root1519buildbot # [ 49.900215] systemd[1]: session-8.scope: Deactivated successfully.1520buildbot # [ 49.906533] systemd-logind[486]: Session 8 logged out. Waiting for processes to exit.1521buildbot # [ 49.911118] systemd-logind[486]: Removed session 8.1522buildbot # [ 49.915721] twistd[894]: 2026-07-05T06:00:58+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1523buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1524buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1525buildbot # Dload Upload Total Spent Left Speed1526buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39939 0 0100 3793 100 3793 0 0 36025 0 0100 3793 100 3793 0 0 32931 0 01527buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds)1528buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1529buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1530buildbot # Dload Upload Total Spent Left Speed1531buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 39471 0 0100 3793 100 3793 0 0 35468 0 0100 3793 100 3793 0 0 32504 0 01532buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.21 seconds)1533buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1534buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1535buildbot # Dload Upload Total Spent Left Speed1536buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 37644 0 0100 3793 100 3793 0 0 34161 0 0100 3793 100 3793 0 0 31341 0 01537buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.23 seconds)1538buildbot # [ 53.805707] twistd[894]: 2026-07-05T06:01:02+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1539buildbot # [ 53.813533] twistd[894]: 2026-07-05T06:01:02+0000 [-] beginning configuration update1540buildbot # [ 53.820598] twistd[894]: 2026-07-05T06:01:02+0000 [-] Loading configuration from '/nix/store/72g2zhxq0qrzvns9a96sl6fq1ym0xj57-master.cfg'1541buildbot # [ 53.871470] twistd[894]: 2026-07-05T06:01:02+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1542buildbot # [ 53.895213] twistd[894]: 2026-07-05T06:01:02+0000 [-] adding 1 new schedulers, removing 01543buildbot # [ 53.990219] twistd[894]: 2026-07-05T06:01:02+0000 [-] configuration update complete (took 0.184 seconds)1544buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1545buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1546buildbot # Dload Upload Total Spent Left Speed1547buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 39857 0 0100 4079 100 4079 0 0 36234 0 0100 4079 100 4079 0 0 33291 0 01548buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.22 seconds)1549buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1550buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1551buildbot # Dload Upload Total Spent Left Speed1552buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 42669 0 0100 4079 100 4079 0 0 38569 0 0100 4079 100 4079 0 0 35242 0 01553buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.17 seconds)1554(finished: subtest: Nightly schedulers are created, in 5.23 seconds)1555subtest: Scheduled effect builder exists1556buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1557buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1558buildbot # Dload Upload Total Spent Left Speed1559buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 65802 0 0100 2371 100 2371 0 0 51695 0 0100 2371 100 2371 0 0 42576 0 01560buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.11 seconds)1561(finished: subtest: Scheduled effect builder exists, in 0.11 seconds)1562(finished: run the VM test script, in 55.82 seconds)1563test script finished in 55.86s1564cleanup1565kill QemuMachine (pid 12)1566buildbot # qemu-system-x86_64: terminating on signal 15 from pid 6 (/nix/store/l9k0anq0z7zz81zcwy035jfwap9ga6rl-python3-3.13.13/bin/python3.13)1567(finished: cleanup, in 0.21 seconds)