vm-test-run-scheduled-effects
checks.aarch64-linux.scheduled-effects
· build #79
· raw
1tribuchet: building on eliza2Machine state will be reset. To keep it, pass --keep-machine-state3start all VLans4(finished: start all VLans, in 0.00 seconds)5Test will time out and terminate in 3600 seconds6run the VM test script7buildbot: waiting for unit sshd.service8buildbot: waiting for the VM to finish booting9buildbot: starting vm10buildbot: QEMU running (pid 12)11buildbot # Disk image does not exist, creating the virtualisation disk image...12buildbot # Formatting '/build/vm-state-buildbot/tmp.r8ohlbGNw6', fmt=raw size=107374182413buildbot # mke2fs 1.47.4 (6-Mar-2025)14buildbot # Discarding device blocks: 0/262144 done15buildbot # Creating filesystem with 262144 4k blocks and 65536 inodes16buildbot # Filesystem UUID: 107e05fa-159f-4cb0-85bb-b9b26688d1d617buildbot # Superblock backups stored on blocks:18buildbot # 32768, 98304, 163840, 22937619buildbot # 20buildbot # Allocating group tables: 0/8 done21buildbot # Writing inode tables: 0/8 done22buildbot # Creating journal (8192 blocks): done23buildbot # Writing superblocks and filesystem accounting information: 0/8 done24buildbot # 25buildbot # Virtualisation disk image created.26buildbot # [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0xc00fac40]27buildbot # [ 0.000000] Linux version 6.18.38 (nixbld@localhost) (gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1-NixOS SMP PREEMPT Sat Jul 4 11:44:22 UTC 202628buildbot # [ 0.000000] KASLR enabled29buildbot # [ 0.000000] random: crng init done30buildbot # [ 0.000000] Machine model: linux,dummy-virt31buildbot # [ 0.000000] efi: UEFI not found.32buildbot # [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT33buildbot # [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]34buildbot # [ 0.000000] NODE_DATA(0) allocated [mem 0x7fded740-0x7fdf0ebf]35buildbot # [ 0.000000] Zone ranges:36buildbot # [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]37buildbot # [ 0.000000] DMA32 empty38buildbot # [ 0.000000] Normal empty39buildbot # [ 0.000000] Device empty40buildbot # [ 0.000000] Movable zone start for each node41buildbot # [ 0.000000] Early memory node ranges42buildbot # [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]43buildbot # [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]44buildbot # [ 0.000000] cma: Reserved 32 MiB at 0x000000007cc0000045buildbot # [ 0.000000] psci: probing for conduit method from DT.46buildbot # [ 0.000000] psci: PSCIv1.3 detected in firmware.47buildbot # [ 0.000000] psci: Using standard PSCI v0.2 function IDs48buildbot # [ 0.000000] psci: Trusted OS migration not required49buildbot # [ 0.000000] psci: SMC Calling Convention v1.150buildbot # [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003)51buildbot # [ 0.000000] percpu: Embedded 76 pages/cpu s186392 r8192 d116712 u31129652buildbot # [ 0.000000] Detected PIPT I-cache on CPU053buildbot # [ 0.000000] CPU features: detected: Address authentication (architected QARMA5 algorithm)54buildbot # [ 0.000000] CPU features: detected: GICv3 CPU interface55buildbot # [ 0.000000] CPU features: detected: Spectre-v456buildbot # [ 0.000000] CPU features: detected: Spectre-BHB57buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC03_CPU_3858buildbot # [ 0.000000] CPU features: detected: AmpereOne erratum AC04_CPU_2359buildbot # [ 0.000000] alternatives: applying boot alternatives60buildbot # [ 0.000000] Kernel command line: console=ttyAMA0 console=tty0 panic=1 boot.panic_on_fail clocksource=acpi_pm root=fstab loglevel=7 net.ifnames=0 lsm=landlock,yama,bpf init=/nix/store/6p1ag8glxmivwrdq44b2z82l8szi03zf-nixos-system-buildbot-test/init regInfo=/nix/store/j5ydm6jvkm328d3pidbsqbrq6n2iszxp-closure-info/registration console=ttyAMA0,115200n8 console=tty061buildbot # [ 0.000000] Unknown kernel command line parameters "regInfo=/nix/store/j5ydm6jvkm328d3pidbsqbrq6n2iszxp-closure-info/registration", will be passed to user space.62buildbot # [ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes63buildbot # [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)64buildbot # [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)65buildbot # [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB66buildbot # [ 0.000000] software IO TLB: area num 1.67buildbot # [ 0.000000] software IO TLB: mapped [mem 0x000000007ca80000-0x000000007cb80000] (1MB)68buildbot # [ 0.000000] Fallback order for Node 0: 069buildbot # [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 26214470buildbot # [ 0.000000] Policy zone: DMA71buildbot # [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off72buildbot # [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=173buildbot # [ 0.000000] allocated 2097152 bytes of page_ext74buildbot # [ 0.000000] ftrace: allocating 74713 entries in 292 pages75buildbot # [ 0.000000] ftrace: allocated 292 pages with 3 groups76buildbot # [ 0.000000] rcu: Hierarchical RCU implementation.77buildbot # [ 0.000000] rcu: RCU event tracing is enabled.78buildbot # [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=384 to nr_cpu_ids=1.79buildbot # [ 0.000000] Trampoline variant of Tasks RCU enabled.80buildbot # [ 0.000000] Rude variant of Tasks RCU enabled.81buildbot # [ 0.000000] Tracing variant of Tasks RCU enabled.82buildbot # [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.83buildbot # [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=184buildbot # [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.85buildbot # [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.86buildbot # [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.87buildbot # [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 088buildbot # [ 0.000000] GICv3: 256 SPIs implemented89buildbot # [ 0.000000] GICv3: 0 Extended SPIs implemented90buildbot # [ 0.000000] Root IRQ handler: gic_handle_irq91buildbot # [ 0.000000] GICv3: GICv3 features: 16 PPIs, DirectLPI92buildbot # [ 0.000000] GICv3: GICD_CTLR.DS=1, SCR_EL3.FIQ=093buildbot # [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a000094buildbot # [ 0.000000] ITS [mem 0x08080000-0x0809ffff]95buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @44ce0000 (indirect, esz 8, psz 64K, shr 1)96buildbot # [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @44cf0000 (flat, esz 8, psz 64K, shr 1)97buildbot # [ 0.000000] GICv3: using LPI property table @0x0000000044d0000098buildbot # [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000044d1000099buildbot # [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.100buildbot # [ 0.000000] arch_timer: cp15 timer running at 1000.00MHz (virt).101buildbot # [ 0.000000] clocksource: arch_sys_counter: mask: 0x1fffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns102buildbot # [ 0.000000] sched_clock: 61 bits at 1000MHz, resolution 1ns, wraps every 4398046511103ns103buildbot # [ 0.000030] arm-pv: using stolen time PV104buildbot # [ 0.000389] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)105buildbot # [ 0.000553] Console: colour dummy device 80x25106buildbot # [ 0.000561] printk: legacy console [tty0] enabled107buildbot # [ 0.000733] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.00 BogoMIPS (lpj=4000000)108buildbot # [ 0.000740] pid_max: default: 32768 minimum: 301109buildbot # [ 0.000809] LSM: initializing lsm=capability,landlock,yama,bpf,ima110buildbot # [ 0.000951] landlock: Up and running.111buildbot # [ 0.000954] Yama: becoming mindful.112buildbot # [ 0.001373] LSM support for eBPF active113buildbot # [ 0.001497] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)114buildbot # [ 0.001517] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)115buildbot # [ 0.002608] cacheinfo: Unable to detect cache hierarchy for CPU 0116buildbot # [ 0.003337] rcu: Hierarchical SRCU implementation.117buildbot # [ 0.003341] rcu: Max phase no-delay instances is 1000.118buildbot # [ 0.004632] fsl-mc MSI: its@8080000 domain created119buildbot # [ 0.004722] EFI services will not be available.120buildbot # [ 0.004799] smp: Bringing up secondary CPUs ...121buildbot # [ 0.004807] smp: Brought up 1 node, 1 CPU122buildbot # [ 0.004810] SMP: Total of 1 processors activated.123buildbot # [ 0.004813] CPU: All CPU(s) started at EL1124buildbot # [ 0.004824] CPU features: detected: Branch Target Identification125buildbot # [ 0.004829] CPU features: detected: ARMv8.4 Translation Table Level126buildbot # [ 0.004835] CPU features: detected: Instruction cache invalidation not required for I/D coherence127buildbot # [ 0.004838] CPU features: detected: Data cache clean to the PoU not required for I/D coherence128buildbot # [ 0.004842] CPU features: detected: Common not Private translations129buildbot # [ 0.004845] CPU features: detected: CRC32 instructions130buildbot # [ 0.004847] CPU features: detected: Data cache clean to Point of Deep Persistence131buildbot # [ 0.004851] CPU features: detected: Data cache clean to Point of Persistence132buildbot # [ 0.004854] CPU features: detected: Data independent timing control (DIT)133buildbot # [ 0.004857] CPU features: detected: E0PD134buildbot # [ 0.004860] CPU features: detected: Enhanced Counter Virtualization135buildbot # [ 0.004863] CPU features: detected: Enhanced Counter Virtualization (CNTPOFF)136buildbot # [ 0.004866] CPU features: detected: Enhanced Virtualization Traps137buildbot # [ 0.004870] CPU features: detected: Fine Grained Traps138buildbot # [ 0.004873] CPU features: detected: Generic authentication (architected QARMA5 algorithm)139buildbot # [ 0.004878] CPU features: detected: RCpc load-acquire (LDAPR)140buildbot # [ 0.004881] CPU features: detected: LSE atomic instructions141buildbot # [ 0.004884] CPU features: detected: Privileged Access Never142buildbot # [ 0.004887] CPU features: detected: PMUv3143buildbot # [ 0.004889] CPU features: detected: RAS Extension Support144buildbot # [ 0.004892] CPU features: detected: RASv1p1 Extension Support145buildbot # [ 0.004895] CPU features: detected: Random Number Generator146buildbot # [ 0.004897] CPU features: detected: Speculation barrier (SB)147buildbot # [ 0.004900] CPU features: detected: Stage-2 Force Write-Back148buildbot # [ 0.004903] CPU features: detected: TLB range maintenance instructions149buildbot # [ 0.004908] CPU features: detected: Speculative Store Bypassing Safe (SSBS)150buildbot # [ 0.004944] alternatives: applying system-wide alternatives151buildbot # [ 0.007922] CPU features: detected: BBM Level 2 without TLB conflict abort152buildbot # [ 0.008155] Memory: 895064K/1048576K available (24384K kernel code, 7086K rwdata, 26324K rodata, 4736K init, 1102K bss, 112244K reserved, 32768K cma-reserved)153buildbot # [ 0.008483] devtmpfs: initialized154buildbot # [ 0.010108] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns155buildbot # [ 0.010131] posixtimers hash table entries: 512 (order: 1, 8192 bytes, linear)156buildbot # [ 0.010152] futex hash table entries: 256 (16384 bytes on 1 NUMA nodes, total 16 KiB, linear).157buildbot # [ 0.010328] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL158buildbot # [ 0.010332] 0 pages in range for non-PLT usage159buildbot # [ 0.010333] 508320 pages in range for PLT usage160buildbot # [ 0.010445] pinctrl core: initialized pinctrl subsystem161buildbot # [ 0.011212] DMI not present or invalid.162buildbot # [ 0.014317] NET: Registered PF_NETLINK/PF_ROUTE protocol family163buildbot # [ 0.016650] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations164buildbot # [ 0.016789] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations165buildbot # [ 0.016951] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations166buildbot # [ 0.016972] audit: initializing netlink subsys (disabled)167buildbot # [ 0.017512] thermal_sys: Registered thermal governor 'fair_share'168buildbot # [ 0.017514] thermal_sys: Registered thermal governor 'bang_bang'169buildbot # [ 0.017517] thermal_sys: Registered thermal governor 'step_wise'170buildbot # [ 0.017520] thermal_sys: Registered thermal governor 'user_space'171buildbot # [ 0.017523] thermal_sys: Registered thermal governor 'power_allocator'172buildbot # [ 0.017549] audit: type=2000 audit(0.016:1): state=initialized audit_enabled=0 res=1173buildbot # [ 0.017557] cpuidle: using governor ladder174buildbot # [ 0.017563] cpuidle: using governor menu175buildbot # [ 0.017757] hw-breakpoint: found 16 breakpoint and 4 watchpoint registers.176buildbot # [ 0.017772] ASID allocator initialised with 65536 entries177buildbot # [ 0.018865] Serial: AMBA PL011 UART driver178buildbot # [ 0.024169] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1179buildbot # [ 0.024327] printk: console [ttyAMA0] enabled180buildbot # [ 0.152138] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages181buildbot # [ 0.152156] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page182buildbot # [ 0.152162] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages183buildbot # [ 0.152166] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page184buildbot # [ 0.152171] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages185buildbot # [ 0.152175] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page186buildbot # [ 0.152179] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages187buildbot # [ 0.152183] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page188buildbot # [ 0.159950] fbcon: Taking over console189buildbot # [ 0.159963] ACPI: Interpreter disabled.190buildbot # [ 0.161773] iommu: Default domain type: Translated191buildbot # [ 0.161783] iommu: DMA domain TLB invalidation policy: strict mode192buildbot # [ 0.163525] SCSI subsystem initialized193buildbot # [ 0.170908] usbcore: registered new interface driver usbfs194buildbot # [ 0.170943] usbcore: registered new interface driver hub195buildbot # [ 0.170961] usbcore: registered new device driver usb196buildbot # [ 0.171240] pps_core: LinuxPPS API ver. 1 registered197buildbot # [ 0.171246] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>198buildbot # [ 0.171268] PTP clock support registered199buildbot # [ 0.171317] EDAC MC: Ver: 3.0.0200buildbot # [ 0.176184] scmi_core: SCMI protocol bus registered201buildbot # [ 0.177176] FPGA manager framework202buildbot # [ 0.178141] vgaarb: loaded203buildbot # [ 0.178792] clocksource: Switched to clocksource arch_sys_counter204buildbot # [ 0.179248] VFS: Disk quotas dquot_6.6.0205buildbot # [ 0.179279] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)206buildbot # [ 0.181753] netfs: FS-Cache loaded207buildbot # [ 0.181863] pnp: PnP ACPI: disabled208buildbot # [ 0.188007] NET: Registered PF_INET protocol family209buildbot # [ 0.188161] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)210buildbot # [ 0.217885] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)211buildbot # [ 0.217924] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)212buildbot # [ 0.217956] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)213buildbot # [ 0.217998] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)214buildbot # [ 0.218073] TCP: Hash tables configured (established 8192 bind 8192)215buildbot # [ 0.218151] MPTCP token hash table entries: 1024 (order: 3, 24576 bytes, linear)216buildbot # [ 0.218203] UDP hash table entries: 512 (order: 3, 32768 bytes, linear)217buildbot # [ 0.218249] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes, linear)218buildbot # [ 0.218328] NET: Registered PF_UNIX/PF_LOCAL protocol family219buildbot # [ 0.218360] NET: Registered PF_XDP protocol family220buildbot # [ 0.218377] PCI: CLS 0 bytes, default 64221buildbot # [ 0.218600] Trying to unpack rootfs image as initramfs...222buildbot # [ 0.236707] kvm [1]: HYP mode not available223buildbot # [ 0.323850] Initialise system trusted keyrings224buildbot # [ 0.330857] workingset: timestamp_bits=42 max_order=18 bucket_order=0225buildbot # [ 0.332190] squashfs: version 4.0 (2009/01/31) Phillip Lougher226buildbot # [ 0.332983] 9p: Installing v9fs 9p2000 file system support227buildbot # [ 0.353648] Key type asymmetric registered228buildbot # [ 0.353661] Asymmetric key parser 'x509' registered229buildbot # [ 0.353713] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)230buildbot # [ 0.358834] io scheduler mq-deadline registered231buildbot # [ 0.358846] io scheduler kyber registered232buildbot # [ 0.366950] pl061_gpio 9030000.pl061: PL061 GPIO chip registered233buildbot # [ 0.368347] ledtrig-cpu: registered to indicate activity on CPUs234buildbot # [ 0.368720] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:235buildbot # [ 0.368736] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000236buildbot # [ 0.368754] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000237buildbot # [ 0.368763] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000238buildbot # [ 0.368782] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits239buildbot # [ 0.368805] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]240buildbot # [ 0.368886] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00241buildbot # [ 0.368895] pci_bus 0000:00: root bus resource [bus 00-ff]242buildbot # [ 0.368901] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]243buildbot # [ 0.368906] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]244buildbot # [ 0.368911] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]245buildbot # [ 0.368968] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint246buildbot # [ 0.369412] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint247buildbot # [ 0.369634] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f]248buildbot # [ 0.369652] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]249buildbot # [ 0.369682] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]250buildbot # [ 0.369698] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref]251buildbot # [ 0.370168] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint252buildbot # [ 0.370357] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f]253buildbot # [ 0.370373] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff]254buildbot # [ 0.370403] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]255buildbot # [ 0.398933] pci 0000:00:03.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint256buildbot # [ 0.399135] pci 0000:00:03.0: BAR 0 [io 0x0000-0x003f]257buildbot # [ 0.399154] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]258buildbot # [ 0.399184] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]259buildbot # [ 0.399759] pci 0000:00:04.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint260buildbot # [ 0.399954] pci 0000:00:04.0: BAR 0 [io 0x0000-0x001f]261buildbot # [ 0.399971] pci 0000:00:04.0: BAR 1 [mem 0x00000000-0x00000fff]262buildbot # [ 0.400001] pci 0000:00:04.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]263buildbot # [ 0.400476] pci 0000:00:05.0: [1af4:1009] type 00 class 0x000200 conventional PCI endpoint264buildbot # [ 0.400665] pci 0000:00:05.0: BAR 0 [io 0x0000-0x001f]265buildbot # [ 0.400681] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff]266buildbot # [ 0.400712] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]267buildbot # [ 0.401171] pci 0000:00:06.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint268buildbot # [ 0.401359] pci 0000:00:06.0: BAR 0 [io 0x0000-0x007f]269buildbot # [ 0.401375] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff]270buildbot # [ 0.401405] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]271buildbot # [ 0.401867] pci 0000:00:07.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint272buildbot # [ 0.402055] pci 0000:00:07.0: BAR 0 [io 0x0000-0x001f]273buildbot # [ 0.402072] pci 0000:00:07.0: BAR 1 [mem 0x00000000-0x00000fff]274buildbot # [ 0.402102] pci 0000:00:07.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]275buildbot # [ 0.402119] pci 0000:00:07.0: ROM [mem 0x00000000-0x0003ffff pref]276buildbot # [ 0.402595] pci 0000:00:08.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint277buildbot # [ 0.402806] pci 0000:00:08.0: BAR 1 [mem 0x00000000-0x00000fff]278buildbot # [ 0.402835] pci 0000:00:08.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]279buildbot # [ 0.403315] pci 0000:00:09.0: [1af4:1052] type 00 class 0x090000 conventional PCI endpoint280buildbot # [ 0.403507] pci 0000:00:09.0: BAR 1 [mem 0x00000000-0x00000fff]281buildbot # [ 0.403537] pci 0000:00:09.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]282buildbot # [ 0.403950] pci 0000:00:0a.0: [8086:24cd] type 00 class 0x0c0320 conventional PCI endpoint283buildbot # [ 0.404138] pci 0000:00:0a.0: BAR 0 [mem 0x00000000-0x00000fff]284buildbot # [ 0.404386] pci 0000:00:0b.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint285buildbot # [ 0.404684] pci 0000:00:0b.0: BAR 0 [io 0x0000-0x003f]286buildbot # [ 0.404703] pci 0000:00:0b.0: BAR 1 [mem 0x00000000-0x00000fff]287buildbot # [ 0.404733] pci 0000:00:0b.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]288buildbot # [ 0.405213] pci 0000:00:0c.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint289buildbot # [ 0.405404] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x001f]290buildbot # [ 0.405421] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x00000fff]291buildbot # [ 0.405452] pci 0000:00:0c.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]292buildbot # [ 0.406042] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned293buildbot # [ 0.406054] pci 0000:00:07.0: ROM [mem 0x10040000-0x1007ffff pref]: assigned294buildbot # [ 0.406060] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned295buildbot # [ 0.406105] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned296buildbot # [ 0.406154] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned297buildbot # [ 0.406202] pci 0000:00:04.0: BAR 4 [mem 0x800000c000-0x800000ffff 64bit pref]: assigned298buildbot # [ 0.406249] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned299buildbot # [ 0.406297] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned300buildbot # [ 0.406346] pci 0000:00:07.0: BAR 4 [mem 0x8000018000-0x800001bfff 64bit pref]: assigned301buildbot # [ 0.406394] pci 0000:00:08.0: BAR 4 [mem 0x800001c000-0x800001ffff 64bit pref]: assigned302buildbot # [ 0.406442] pci 0000:00:09.0: BAR 4 [mem 0x8000020000-0x8000023fff 64bit pref]: assigned303buildbot # [ 0.406491] pci 0000:00:0b.0: BAR 4 [mem 0x8000024000-0x8000027fff 64bit pref]: assigned304buildbot # [ 0.406557] pci 0000:00:0c.0: BAR 4 [mem 0x8000028000-0x800002bfff 64bit pref]: assigned305buildbot # [ 0.406604] pci 0000:00:01.0: BAR 1 [mem 0x10080000-0x10080fff]: assigned306buildbot # [ 0.406628] pci 0000:00:02.0: BAR 1 [mem 0x10081000-0x10081fff]: assigned307buildbot # [ 0.406650] pci 0000:00:03.0: BAR 1 [mem 0x10082000-0x10082fff]: assigned308buildbot # [ 0.406673] pci 0000:00:04.0: BAR 1 [mem 0x10083000-0x10083fff]: assigned309buildbot # [ 0.406696] pci 0000:00:05.0: BAR 1 [mem 0x10084000-0x10084fff]: assigned310buildbot # [ 0.406719] pci 0000:00:06.0: BAR 1 [mem 0x10085000-0x10085fff]: assigned311buildbot # [ 0.406744] pci 0000:00:07.0: BAR 1 [mem 0x10086000-0x10086fff]: assigned312buildbot # [ 0.406767] pci 0000:00:08.0: BAR 1 [mem 0x10087000-0x10087fff]: assigned313buildbot # [ 0.406790] pci 0000:00:09.0: BAR 1 [mem 0x10088000-0x10088fff]: assigned314buildbot # [ 0.462867] pci 0000:00:0a.0: BAR 0 [mem 0x10089000-0x10089fff]: assigned315buildbot # [ 0.462900] pci 0000:00:0b.0: BAR 1 [mem 0x1008a000-0x1008afff]: assigned316buildbot # [ 0.462925] pci 0000:00:0c.0: BAR 1 [mem 0x1008b000-0x1008bfff]: assigned317buildbot # [ 0.462949] pci 0000:00:06.0: BAR 0 [io 0x1000-0x107f]: assigned318buildbot # [ 0.462973] pci 0000:00:03.0: BAR 0 [io 0x1080-0x10bf]: assigned319buildbot # [ 0.462996] pci 0000:00:0b.0: BAR 0 [io 0x10c0-0x10ff]: assigned320buildbot # [ 0.463019] pci 0000:00:01.0: BAR 0 [io 0x1100-0x111f]: assigned321buildbot # [ 0.463043] pci 0000:00:02.0: BAR 0 [io 0x1120-0x113f]: assigned322buildbot # [ 0.463067] pci 0000:00:04.0: BAR 0 [io 0x1140-0x115f]: assigned323buildbot # [ 0.463090] pci 0000:00:05.0: BAR 0 [io 0x1160-0x117f]: assigned324buildbot # [ 0.463115] pci 0000:00:07.0: BAR 0 [io 0x1180-0x119f]: assigned325buildbot # [ 0.463139] pci 0000:00:0c.0: BAR 0 [io 0x11a0-0x11bf]: assigned326buildbot # [ 0.463171] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]327buildbot # [ 0.463182] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]328buildbot # [ 0.463187] pci_bus 0000:00: resource 6 [mem 0x8000000000-0xffffffffff]329buildbot # [ 0.464436] pci 0000:00:0a.0: enabling device (0000 -> 0002)330buildbot # [ 0.504742] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)331buildbot # [ 0.506910] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)332buildbot # [ 0.508923] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)333buildbot # [ 0.518983] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003)334buildbot # [ 0.520959] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)335buildbot # [ 0.522903] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)336buildbot # [ 0.524946] virtio-pci 0000:00:07.0: enabling device (0000 -> 0003)337buildbot # [ 0.534974] virtio-pci 0000:00:08.0: enabling device (0000 -> 0002)338buildbot # [ 0.537480] virtio-pci 0000:00:09.0: enabling device (0000 -> 0002)339buildbot # [ 0.547346] virtio-pci 0000:00:0b.0: enabling device (0000 -> 0003)340buildbot # [ 0.549768] virtio-pci 0000:00:0c.0: enabling device (0000 -> 0003)341buildbot # [ 0.562667] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled342buildbot # [ 0.565203] msm_serial: driver initialized343buildbot # [ 0.565365] SuperH (H)SCI(F) driver initialized344buildbot # [ 0.565418] STM32 USART driver initialized345buildbot # [ 0.607360] loop: module loaded346buildbot # [ 0.607544] virtio_blk virtio5: 1/0/0 default/read/poll queues347buildbot # [ 0.608398] virtio_blk virtio5: [vda] 2097152 512-byte logical blocks (1.07 GB/1.00 GiB)348buildbot # [ 0.615374] megasas: 07.734.00.00-rc1349buildbot # [ 0.616161] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff]350buildbot # [ 0.617943] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000351buildbot # [ 0.617972] Intel/Sharp Extended Query Table at 0x0031352buildbot # [ 0.619617] Using buffer write method353buildbot # [ 0.619696] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff]354buildbot # [ 0.621311] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000355buildbot # [ 0.621339] Intel/Sharp Extended Query Table at 0x0031356buildbot # [ 0.630588] Using buffer write method357buildbot # [ 0.630620] Concatenating MTD devices:358buildbot # [ 0.630624] (0): "0.flash"359buildbot # [ 0.630628] (1): "0.flash"360buildbot # [ 0.630632] into device "0.flash"361buildbot # [ 0.853804] Freeing initrd memory: 25516K362buildbot # [ 0.859872] tun: Universal TUN/TAP device driver, 1.6363buildbot # [ 0.863687] thunder_xcv, ver 1.0364buildbot # [ 0.863727] thunder_bgx, ver 1.0365buildbot # [ 0.863749] nicpf, ver 1.0366buildbot # [ 0.864272] e1000: Intel(R) PRO/1000 Network Driver367buildbot # [ 0.864279] e1000: Copyright (c) 1999-2006 Intel Corporation.368buildbot # [ 0.864308] e1000e: Intel(R) PRO/1000 Network Driver369buildbot # [ 0.864315] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.370buildbot # [ 0.864346] igb: Intel(R) Gigabit Ethernet Network Driver371buildbot # [ 0.864351] igb: Copyright (c) 2007-2014 Intel Corporation.372buildbot # [ 0.864373] igbvf: Intel(R) Gigabit Virtual Function Network Driver373buildbot # [ 0.864379] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.374buildbot # [ 0.864506] sky2: driver version 1.30375buildbot # [ 0.866021] usbcore: registered new interface driver usb-storage376buildbot # [ 0.866070] usbcore: registered new interface driver usbserial_generic377buildbot # [ 0.866083] usbserial: USB Serial support registered for generic378buildbot # [ 0.866652] hv_vmbus: registering driver hyperv_keyboard379buildbot # [ 0.867463] ehci-pci 0000:00:0a.0: EHCI Host Controller380buildbot # [ 0.867489] ehci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 1381buildbot # [ 0.867726] ehci-pci 0000:00:0a.0: irq 15, io mem 0x10089000382buildbot # [ 0.881933] ehci-pci 0000:00:0a.0: USB 2.0 started, EHCI 1.00383buildbot # [ 0.882293] hub 1-0:1.0: USB hub found384buildbot # [ 0.882313] hub 1-0:1.0: 6 ports detected385buildbot # [ 0.885253] rtc-pl031 9010000.pl031: registered as rtc0386buildbot # [ 0.885282] rtc-pl031 9010000.pl031: setting system clock to 2026-10-18T06:54:13 UTC (1792306453)387buildbot # [ 0.885585] i2c_dev: i2c /dev entries driver388buildbot # [ 0.890466] sdhci: Secure Digital Host Controller Interface driver389buildbot # [ 0.890478] sdhci: Copyright(c) Pierre Ossman390buildbot # [ 0.890733] Synopsys Designware Multimedia Card Interface Driver391buildbot # [ 0.893177] sdhci-pltfm: SDHCI platform and OF driver helper392buildbot # [ 0.894775] hid: raw HID events driver (C) Jiri Kosina393buildbot # [ 0.896472] usbcore: registered new interface driver usbhid394buildbot # [ 0.896480] usbhid: USB HID core driver395buildbot # [ 0.929100] hw perfevents: enabled with armv8_pmuv3 PMU driver, 11 (0,800003ff) counters available396buildbot # [ 0.930567] drop_monitor: Initializing network drop monitor service397buildbot # [ 0.930700] NET: Registered PF_INET6 protocol family398buildbot # [ 0.933813] Segment Routing with IPv6399buildbot # [ 0.933843] In-situ OAM (IOAM) with IPv6400buildbot # [ 0.933870] NET: Registered PF_PACKET protocol family401buildbot # [ 0.935584] 9pnet: Installing 9P2000 support402buildbot # [ 0.937583] Key type dns_resolver registered403buildbot # [ 0.944421] registered taskstats version 1404buildbot # [ 0.944569] Loading compiled-in X.509 certificates405buildbot # [ 0.952714] Demotion targets for Node 0: null406buildbot # [ 0.952820] Key type .fscrypt registered407buildbot # [ 0.952827] Key type fscrypt-provisioning registered408buildbot # [ 0.952921] ima: No TPM chip found, activating TPM-bypass!409buildbot # [ 0.952939] ima: Allocated hash algorithm: sha1410buildbot # [ 0.952960] ima: No architecture policies found411buildbot # [ 0.957196] input: gpio-keys as /devices/platform/gpio-keys/input/input0412buildbot # [ 0.975858] clk: Disabling unused clocks413buildbot # [ 0.975877] PM: genpd: Disabling unused power domains414buildbot # [ 0.980285] Freeing unused kernel memory: 4736K415buildbot # [ 0.980503] Run /init as init process416buildbot # [ 0.997115] systemd[1]: Successfully made /usr/ read-only.417buildbot # [ 1.150837] usb 1-1: new high-speed USB device number 2 using ehci-pci418buildbot # [ 1.300426] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1419buildbot # [ 1.331918] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)420buildbot # [ 1.338189] systemd[1]: Detected virtualization qemu.421buildbot # [ 1.339279] systemd[1]: Detected architecture arm64.422buildbot # [ 1.340294] systemd[1]: Running in initrd.423buildbot # [ 1.341716] systemd[1]: Initializing machine ID from random generator.424buildbot # [ 1.343277] systemd[1]: Hostname set to <buildbot>.425buildbot # [ 1.388815] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:0a.0-1/input0426buildbot # [ 1.433213] systemd[1]: Queued start job for default target Initrd Default Target.427buildbot # [ 1.440726] systemd[1]: Created slice Slice /system/modprobe.428buildbot # [ 1.441798] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.429buildbot # [ 1.443021] systemd[1]: Expecting device /dev/disk/by-label/nixos...430buildbot # [ 1.443991] systemd[1]: Reached target Path Units.431buildbot # [ 1.444712] systemd[1]: Reached target Slice Units.432buildbot # [ 1.445447] systemd[1]: Reached target Swaps.433buildbot # [ 1.446161] systemd[1]: Reached target Timer Units.434buildbot # [ 1.447045] systemd[1]: Listening on D-Bus System Message Bus Socket.435buildbot # [ 1.448199] systemd[1]: Listening on Journal Socket (/dev/log).436buildbot # [ 1.449244] systemd[1]: Listening on Journal Sockets.437buildbot # [ 1.450120] systemd[1]: Listening on udev Control Socket.438buildbot # [ 1.451238] systemd[1]: Listening on udev Kernel Socket.439buildbot # [ 1.451264] systemd[1]: Reached target Socket Units.440buildbot # [ 1.454143] systemd[1]: Starting Create List of Static Device Nodes...441buildbot # [ 1.462721] systemd[1]: Starting Load Kernel Module 9pnet_virtio...442buildbot # [ 1.463946] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs443buildbot # [ 1.470967] systemd[1]: Mounting Kernel Configuration File System...444buildbot # [ 1.478876] systemd[1]: Starting Journal Service...445buildbot # [ 1.500231] systemd[1]: Starting Load Kernel Modules...446buildbot # [ 1.501031] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki447buildbot # [ 1.509918] usb 1-2: new high-speed USB device number 3 using ehci-pci448buildbot # [ 1.511797] systemd[1]: Starting Coldplug All udev Devices...449buildbot # [ 1.521523] systemd-journald[73]: Collecting audit messages is disabled.450buildbot # [ 1.522529] systemd[1]: Finished Create List of Static Device Nodes.451buildbot # [ 1.524375] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.452buildbot # [ 1.528038] systemd[1]: Finished Load Kernel Module 9pnet_virtio.453buildbot # [ 1.528301] systemd[1]: Mounted Kernel Configuration File System.454buildbot # [ 1.539266] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...455buildbot # [ 1.566493] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.456buildbot # [ 1.577458] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.457buildbot # [ 1.583165] systemd[1]: Starting Create Static Device Nodes in /dev...458buildbot # [ 1.587004] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev459buildbot # [ 1.591467] [drm] pci: virtio-gpu-pci detected at 0000:00:08.0460buildbot # [ 1.591793] [drm] features: -virgl +edid -resource_blob -host_visible461buildbot # [ 1.591803] [drm] features: -context_init462buildbot # [ 1.592503] [drm] number of scanouts: 1463buildbot # [ 1.592521] [drm] number of cap sets: 0464buildbot # [ 1.607233] virtio-pci 0000:00:08.0: [drm] Registered 1 planes with drm panic465buildbot # [ 1.607249] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:08.0 on minor 0466buildbot # [ 1.639345] systemd[1]: Finished Create Static Device Nodes in /dev.467buildbot # [ 1.639712] systemd[1]: Reached target Preparation for Local File Systems.468buildbot # [ 1.639740] systemd[1]: Reached target Local File Systems.469buildbot # [ 1.643573] systemd[1]: Starting Rule-based Manager for Device Events and Files...470buildbot # [ 1.647195] Console: switching to colour frame buffer device 160x50471buildbot # [ 1.662416] virtio-pci 0000:00:08.0: [drm] fb0: virtio_gpudrmfb frame buffer device472buildbot # [ 1.668776] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:0a.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2473buildbot # [ 1.674081] hid-generic 0003:0627:0001.0002: input,hidraw1: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.0-2/input0474buildbot # [ 1.691309] systemd[1]: Finished Load Kernel Modules.475buildbot # [ 1.699121] systemd[1]: Starting Apply Kernel Variables...476buildbot # [ 1.721882] systemd[1]: Started Journal Service.477buildbot # [ 1.713784] systemd-modules-load[75]: Inserted module 'dm_mod'478buildbot # [ 1.715043] systemd-modules-load[75]: Module 'virtio_balloon' is built in479buildbot # [ 1.725491] systemd-modules-load[75]: Module 'virtio_console' is built in480buildbot # [ 1.726676] systemd-modules-load[75]: Inserted module 'virtio_gpu'481buildbot # [ 1.727658] systemd-modules-load[75]: Module 'virtio_rng' is built in482buildbot # [ 1.740861] systemd[1]: Starting Create System Files and Directories...483buildbot # [ 1.742215] systemd-udevd[80]: Using default interface naming scheme 'v260'.484buildbot # [ 1.754728] systemd[1]: Finished Apply Kernel Variables.485buildbot # [ 1.765500] systemd[1]: Finished Create System Files and Directories.486buildbot # [ 1.781659] systemd[1]: Started Rule-based Manager for Device Events and Files.487buildbot # [ 1.864078] systemd[1]: Starting Virtual Console Setup...488buildbot # [ 1.928768] systemd-vconsole-setup[104]: Configuration of first virtual console was skipped, ignoring remaining ones.489buildbot # [ 1.931853] systemd[1]: Finished Virtual Console Setup.490buildbot # [ 2.618335] systemd[1]: Finished Coldplug All udev Devices.491buildbot # [ 2.619306] systemd[1]: Reached target System Initialization.492buildbot # [ 2.624461] systemd[1]: Reached target Basic System.493buildbot # [ 2.756401] (udev-worker)[93]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.494buildbot # [ 2.787502] (udev-worker)[102]: Network interface NamePolicy= disabled on kernel command line.495buildbot # [ 2.798110] (udev-worker)[93]: Network interface NamePolicy= disabled on kernel command line.496buildbot # [ 2.859738] systemd[1]: Found device /dev/disk/by-label/nixos.497buildbot # [ 2.862893] systemd[1]: Reached target Initrd Root Device.498buildbot # [ 2.868705] systemd[1]: Starting File System Check on /dev/disk/by-label/nixos...499buildbot # [ 2.914736] systemd-fsck[113]: nixos: clean, 12/65536 files, 13019/262144 blocks500buildbot # [ 2.923665] systemd[1]: Finished File System Check on /dev/disk/by-label/nixos.501buildbot # [ 2.929661] systemd[1]: Mounting /sysroot...502buildbot # [ 2.976348] EXT4-fs (vda): mounted filesystem 107e05fa-159f-4cb0-85bb-b9b26688d1d6 r/w with ordered data mode. Quota mode: none.503buildbot # [ 2.963788] systemd[1]: Mounted /sysroot.504buildbot # [ 2.966946] systemd[1]: Reached target Initrd Root File System.505buildbot # [ 2.972631] systemd[1]: Starting Mountpoints Configured in the Real Root...506buildbot # [ 2.991888] systemd-sysroot-fstab-check[121]: /sysroot should be mounted in the initrd, will request daemon-reload.507buildbot # [ 3.001909] systemd[1]: Reload requested from client PID 121 ('systemd-sysroot') (unit initrd-parse-etc.service)...508buildbot # [ 3.004252] systemd[1]: Reloading...509buildbot # [ 3.223183] systemd[1]: Reloading finished in 222 ms.510buildbot # [ 3.242630] systemd-sysroot-fstab-check[121]: Requesting initrd-fs.target/start/replace...511buildbot # [ 3.247393] systemd-sysroot-fstab-check[121]: Requesting swap.target/start/replace...512buildbot # [ 3.260322] systemd[1]: Starting Load Kernel Module 9pnet_virtio...513buildbot # [ 3.262171] systemd[1]: initrd-parse-etc.service: Deactivated successfully.514buildbot # [ 3.266378] systemd[1]: Finished Mountpoints Configured in the Real Root.515buildbot # [ 3.267939] systemd[1]: initrd-parse-etc.service: Triggering OnSuccess= dependencies.516buildbot # [ 3.286572] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.517buildbot # [ 3.288141] systemd[1]: Finished Load Kernel Module 9pnet_virtio.518buildbot # [ 3.498272] systemd[1]: Mounting /sysroot/nix/.ro-store...519buildbot # [ 3.510224] systemd[1]: Mounting /sysroot/nix/.rw-store...520buildbot # [ 3.521308] systemd[1]: Mounting /sysroot/run...521buildbot # [ 3.538845] systemd[1]: Mounting /sysroot/tmp/shared...522buildbot # [ 3.568501] systemd[1]: Mounting /sysroot/tmp/xchg...523buildbot # [ 3.583257] systemd[1]: Mounted /sysroot/run.524buildbot # [ 3.588259] systemd[1]: Mounted /sysroot/nix/.rw-store.525buildbot # [ 3.615276] systemd[1]: Starting rw-sysroot-nix-store.service...526buildbot # [ 3.617764] systemd[1]: Mounted /sysroot/nix/.ro-store.527buildbot # [ 3.626177] systemd[1]: Mounted /sysroot/tmp/shared.528buildbot # [ 3.630871] systemd[1]: Mounted /sysroot/tmp/xchg.529buildbot # [ 3.647773] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.530buildbot # [ 3.649129] systemd[1]: Finished rw-sysroot-nix-store.service.531buildbot # [ 4.177005] (udev-worker)[99]: mtd0ro: Failed to find and pin callout binary "/nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/mtd_probe": No such file or directory532buildbot # [ 4.183557] (udev-worker)[99]: mtd0ro: /nix/store/k2s978i7i26km4cr56fvm64p2q6mpl02-systemd-260.2/lib/udev/rules.d/75-probe_mtd.rules:5 IMPORT{program}="mtd_probe $devnode": Failed to execute "mtd_probe /dev/mtd0ro", ignoring: No such file or directory533buildbot # [ 4.210969] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.534buildbot # [ 4.212158] systemd[1]: Stopped Virtual Console Setup.535buildbot # [ 4.216191] systemd[1]: Stopping Virtual Console Setup...536buildbot # [ 4.218318] systemd[1]: Starting Virtual Console Setup...537buildbot # [ 4.232788] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.538buildbot # [ 4.235164] systemd[1]: Stopped Virtual Console Setup.539buildbot # [ 4.236393] systemd[1]: Starting Virtual Console Setup...540buildbot # [ 4.257650] systemd-vconsole-setup[156]: Configuration of first virtual console was skipped, ignoring remaining ones.541buildbot # [ 4.261052] systemd[1]: Finished Virtual Console Setup.542buildbot # [ 4.498180] systemd[1]: Mounting /sysroot/nix/store...543buildbot # [ 4.535884] systemd[1]: Mounted /sysroot/nix/store.544buildbot # [ 4.538336] systemd[1]: Reached target Initrd File Systems.545buildbot # [ 4.541967] systemd[1]: Starting Find NixOS closure...546buildbot # [ 4.549353] systemd[1]: Starting Create Volatile Files and Directories in the Real Root...547buildbot # [ 4.586720] systemd[1]: Finished Create Volatile Files and Directories in the Real Root.548buildbot # [ 4.592121] systemd[1]: sysroot-run-credentials-systemd\x2dtmpfiles\x2dsetup\x2dsysroot.service.mount: Deactivated successfully.549buildbot # [ 4.604123] systemd[1]: Finished Find NixOS closure.550buildbot # [ 4.605207] systemd[1]: Reached target Initrd Default Target.551buildbot # [ 4.607717] systemd[1]: Starting Cleaning Up and Shutting Down Daemons...552buildbot # [ 4.634941] systemd[1]: Stopped target Initrd Default Target.553buildbot # [ 4.636586] systemd[1]: Stopped target Basic System.554buildbot # [ 4.640484] systemd[1]: Stopped target Initrd Root Device.555buildbot # [ 4.641547] systemd[1]: Stopped target Path Units.556buildbot # [ 4.642412] systemd[1]: systemd-ask-password-console.path: Deactivated successfully.557buildbot # [ 4.644907] systemd[1]: Stopped Dispatch Password Requests to Console Directory Watch.558buildbot # [ 4.647748] systemd[1]: Stopped target Slice Units.559buildbot # [ 4.652226] systemd[1]: Stopped target Socket Units.560buildbot # [ 4.653177] systemd[1]: Stopped target System Initialization.561buildbot # [ 4.654100] systemd[1]: Stopped target Swaps.562buildbot # [ 4.654829] systemd[1]: Stopped target Timer Units.563buildbot # [ 4.655664] systemd[1]: dbus.socket: Deactivated successfully.564buildbot # [ 4.660243] systemd[1]: Closed D-Bus System Message Bus Socket.565buildbot # [ 4.661253] systemd[1]: initrd-find-nixos-closure.service: Deactivated successfully.566buildbot # [ 4.663070] systemd[1]: Stopped Find NixOS closure.567buildbot # [ 4.666219] systemd[1]: Starting Load Kernel Module 9pnet_virtio...568buildbot # [ 4.672946] systemd[1]: Starting rw-sysroot-nix-store.service...569buildbot # [ 4.674832] systemd[1]: systemd-sysctl.service: Deactivated successfully.570buildbot # [ 4.676799] systemd[1]: Stopped Apply Kernel Variables.571buildbot # [ 4.678209] systemd[1]: systemd-modules-load.service: Deactivated successfully.572buildbot # [ 4.681385] systemd[1]: Stopped Load Kernel Modules.573buildbot # [ 4.684375] systemd[1]: systemd-tmpfiles-setup-sysroot.service: Deactivated successfully.574buildbot # [ 4.687530] systemd[1]: Stopped Create Volatile Files and Directories in the Real Root.575buildbot # [ 4.696996] systemd[1]: systemd-tmpfiles-setup.service: Deactivated successfully.576buildbot # [ 4.702355] systemd[1]: Stopped Create System Files and Directories.577buildbot # [ 4.704638] systemd[1]: Stopped target Local File Systems.578buildbot # [ 4.706537] systemd[1]: Stopped target Preparation for Local File Systems.579buildbot # [ 4.709172] systemd[1]: systemd-udev-trigger.service: Deactivated successfully.580buildbot # [ 4.711822] systemd[1]: Stopped Coldplug All udev Devices.581buildbot # [ 4.713146] systemd[1]: Stopping Rule-based Manager for Device Events and Files...582buildbot # [ 4.716601] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.583buildbot # [ 4.719826] systemd[1]: Stopped Virtual Console Setup.584buildbot # [ 4.720749] systemd[1]: initrd-cleanup.service: Deactivated successfully.585buildbot # [ 4.721696] systemd[1]: Finished Cleaning Up and Shutting Down Daemons.586buildbot # [ 4.722617] systemd[1]: systemd-udevd.service: Deactivated successfully.587buildbot # [ 4.723543] systemd[1]: Stopped Rule-based Manager for Device Events and Files.588buildbot # [ 4.725353] systemd[1]: systemd-udevd.service: Consumed 1.494s CPU time over 3.079s wall clock time, 23.2M memory peak.589buildbot # [ 4.726826] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.590buildbot # [ 4.727850] systemd[1]: Finished Load Kernel Module 9pnet_virtio.591buildbot # [ 4.728832] systemd[1]: rw-sysroot-nix-store.service: Deactivated successfully.592buildbot # [ 4.729843] systemd[1]: Finished rw-sysroot-nix-store.service.593buildbot # [ 4.730671] systemd[1]: systemd-udevd-control.socket: Deactivated successfully.594buildbot # [ 4.731684] systemd[1]: Closed udev Control Socket.595buildbot # [ 4.736257] systemd[1]: Starting Cleanup udev Database...596buildbot # [ 4.740163] systemd[1]: systemd-tmpfiles-setup-dev.service: Deactivated successfully.597buildbot # [ 4.741457] systemd[1]: Stopped Create Static Device Nodes in /dev.598buildbot # [ 4.742479] systemd[1]: systemd-tmpfiles-setup-dev-early.service: Deactivated successfully.599buildbot # [ 4.748195] systemd[1]: Stopped Create Static Device Nodes in /dev gracefully.600buildbot # [ 4.749293] systemd[1]: kmod-static-nodes.service: Deactivated successfully.601buildbot # [ 4.750251] systemd[1]: Stopped Create List of Static Device Nodes.602buildbot # [ 4.777645] systemd[1]: initrd-udevadm-cleanup-db.service: Deactivated successfully.603buildbot # [ 4.780545] systemd[1]: Finished Cleanup udev Database.604buildbot # [ 4.781414] systemd[1]: Reached target Switch Root.605buildbot # [ 4.784122] systemd[1]: Starting NixOS Activation...606buildbot # [ 4.916690] initrd-nixos-activation-start[181]: booting system configuration /nix/store/6p1ag8glxmivwrdq44b2z82l8szi03zf-nixos-system-buildbot-test607buildbot # [ 4.967809] initrd-nixos-activation-start[181]: running activation script...608buildbot # [ 5.288404] initrd-nixos-activation-start[204]: setting up /etc...609buildbot # [ 5.482608] systemd[1]: initrd-nixos-activation.service: Deactivated successfully.610buildbot # [ 5.485433] systemd[1]: Finished NixOS Activation.611buildbot # [ 5.486545] systemd[1]: Starting Switch Root...612buildbot # [ 5.510668] systemd[1]: Switching root.613buildbot # [ 5.579815] systemd-journald[73]: Received SIGTERM from PID 1 (systemd).614buildbot # [ 6.126308] systemd[1]: systemd 260.2 running in system mode (+PAM +AUDIT -SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF -XKBCOMMON +UTMP +LIBARCHIVE)615buildbot # [ 6.133364] systemd[1]: Detected virtualization qemu.616buildbot # [ 6.135073] systemd[1]: Detected architecture arm64.617buildbot # [ 6.137138] systemd[1]: Detected first boot.618buildbot # [ 6.141423] systemd[1]: Initializing machine ID from random generator.619buildbot # [ 6.416219] systemd[1]: bpf-restrict-fs: LSM BPF program attached620buildbot # [ 6.577099] NET: Registered PF_VSOCK protocol family621buildbot # [ 6.583172] Guest personality initialized and is inactive622buildbot # [ 6.585133] VMCI host device registered (name=vmci, major=10, minor=261)623buildbot # [ 6.585169] Initialized host personality624buildbot # [ 6.642064] systemd[1]: Applying preset policy.625buildbot # [ 7.021108] systemd[1]: Populated /etc with preset unit settings.626buildbot # [ 7.392095] systemd[1]: initrd-switch-root.service: Deactivated successfully.627buildbot # [ 7.393375] systemd[1]: Stopped initrd-switch-root.service.628buildbot # [ 7.396596] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.629buildbot # [ 7.399413] systemd[1]: Created slice Slice /system/getty.630buildbot # [ 7.401378] systemd[1]: Created slice User and Session Slice.631buildbot # [ 7.402624] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.632buildbot # [ 7.404356] systemd[1]: Started Forward Password Requests to Wall Directory Watch.633buildbot # [ 7.406416] systemd[1]: Expecting device /dev/hvc0...634buildbot # [ 7.407532] systemd[1]: Expecting device /dev/ttyAMA0...635buildbot # [ 7.409471] systemd[1]: Reached target Local Encrypted Volumes.636buildbot # [ 7.410604] systemd[1]: Stopped target initrd-fs.target.637buildbot # [ 7.411917] systemd[1]: Stopped target initrd-root-fs.target.638buildbot # [ 7.413260] systemd[1]: Stopped target initrd-switch-root.target.639buildbot # [ 7.415249] systemd[1]: Reached target Virtual Machines and Containers.640buildbot # [ 7.416515] systemd[1]: Reached target Path Units.641buildbot # [ 7.417725] systemd[1]: Reached target Remote File Systems.642buildbot # [ 7.419069] systemd[1]: Reached target Slice Units.643buildbot # [ 7.420831] systemd[1]: Reached target Swaps.644buildbot # [ 7.424075] systemd[1]: Listening on Query the User Interactively for a Password.645buildbot # [ 7.428188] systemd[1]: Listening on Process Core Dump Socket.646buildbot # [ 7.431339] systemd[1]: Listening on Credential Encryption/Decryption.647buildbot # [ 7.434765] systemd[1]: Listening on Factory Reset Management.648buildbot # [ 7.439286] systemd[1]: Starting Journal Log Access Socket...649buildbot # [ 7.441277] systemd[1]: Listening on Journal Audit Socket.650buildbot # [ 7.444843] systemd[1]: Listening on Console Output Muting Service Socket.651buildbot # [ 7.446326] systemd[1]: Listening on Userspace Out-Of-Memory (OOM) Killer Socket.652buildbot # [ 7.448076] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki653buildbot # [ 7.449742] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki654buildbot # [ 7.458167] systemd[1]: Listening on Disk Repartitioning Service Socket.655buildbot # [ 7.459597] systemd[1]: Listening on udev Control Socket.656buildbot # [ 7.460846] systemd[1]: Listening on udev Varlink Socket.657buildbot # [ 7.465191] systemd[1]: Mounting Huge Pages File System...658buildbot # [ 7.468953] systemd[1]: Mounting POSIX Message Queue File System...659buildbot # [ 7.474969] systemd[1]: Mounting Kernel Debug File System...660buildbot # [ 7.483260] systemd[1]: Mounting Kernel Trace File System...661buildbot # [ 7.494465] systemd[1]: Starting Create List of Static Device Nodes...662buildbot # [ 7.503278] systemd[1]: Starting Load Kernel Module 9pnet_virtio...663buildbot # [ 7.504557] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs664buildbot # [ 7.510661] systemd[1]: Mounting Kernel Configuration File System...665buildbot # [ 7.514979] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm666buildbot # [ 7.520319] systemd[1]: Load Kernel Module efi_pstore skipped, unmet condition check ConditionKernelModuleLoaded=!efi_pstore667buildbot # [ 7.535674] systemd[1]: Starting Load Kernel Module fuse...668buildbot # [ 7.538111] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67669buildbot # [ 7.576664] systemd[1]: Starting Journal Service...670buildbot # [ 7.604057] systemd[1]: Starting Load Kernel Modules...671buildbot # [ 7.641726] systemd[1]: Starting Userspace Out-Of-Memory (OOM) Killer...672buildbot # [ 7.673783] fuse: init (API version 7.45)673buildbot # [ 7.677526] systemd[1]: Starting Remount Root and Kernel File Systems...674buildbot # [ 7.677873] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki675buildbot # [ 7.685941] systemd[1]: Starting Coldplug All udev Devices...676buildbot # [ 7.691040] systemd-journald[275]: Collecting audit messages is enabled.677buildbot # [ 7.701263] systemd[1]: Listening on Journal Log Access Socket.678buildbot # [ 7.686975] systemd[1]: Queued start job for default target Multi-User System.679buildbot # [ 7.691112] systemd[1]: systemd-journald.service: Deactivated successfully.680buildbot # [ 7.704357] systemd-modules-load[276]: Module 'atkbd' is built in681buildbot # [ 7.706353] systemd-modules-load[276]: Module 'loop' is built in682buildbot # [ 7.728821] systemd[1]: Started Journal Service.683buildbot # [ 7.717723] systemd[1]: Mounted Huge Pages File System.684buildbot # [ 7.721494] systemd[1]: Mounted POSIX Message Queue File System.685buildbot # [ 7.724350] systemd[1]: Mounted Kernel Debug File System.686buildbot # [ 7.725404] systemd[1]: Mounted Kernel Trace File System.687buildbot # [ 7.729891] systemd-modules-load[276]: Inserted module 'tls'688buildbot # [ 7.733946] systemd[1]: Finished Create List of Static Device Nodes.689buildbot # [ 7.741943] systemd[1]: modprobe@9pnet_virtio.service: Deactivated successfully.690buildbot # [ 7.746600] systemd[1]: Finished Load Kernel Module 9pnet_virtio.691buildbot # [ 7.751126] systemd[1]: Mounted Kernel Configuration File System.692buildbot # [ 7.756938] systemd[1]: modprobe@fuse.service: Deactivated successfully.693buildbot # [ 7.759994] systemd[1]: Finished Load Kernel Module fuse.694buildbot # [ 7.763931] systemd[1]: Finished Load Kernel Modules.695buildbot # [ 7.780342] systemd[1]: Mounting FUSE Control File System...696buildbot # [ 7.792147] systemd[1]: Starting Apply Kernel Variables...697buildbot # [ 7.815034] EXT4-fs (vda): re-mounted 107e05fa-159f-4cb0-85bb-b9b26688d1d6.698buildbot # [ 7.809522] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...699buildbot # [ 7.811466] systemd-oomd[278]: No swap; memory pressure usage will be degraded700buildbot # [ 7.821701] systemd[1]: Started Userspace Out-Of-Memory (OOM) Killer.701buildbot # [ 7.838096] systemd[1]: Finished Remount Root and Kernel File Systems.702buildbot # [ 7.839164] systemd[1]: Listening on Disk Image Download Service Socket.703buildbot # [ 7.849892] systemd[1]: Starting Flush Journal to Persistent Storage...704buildbot # [ 7.851707] systemd[1]: Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore705buildbot # [ 7.864131] systemd[1]: Starting Load/Save OS Random Seed...706buildbot # [ 7.865085] systemd[1]: TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki707buildbot # [ 7.938129] systemd[1]: Mounted FUSE Control File System.708buildbot # [ 7.983937] systemd-journald[275]: Received client request to flush runtime journal.709buildbot # [ 8.019962] systemd[1]: Finished Apply Kernel Variables.710buildbot # [ 8.024453] systemd[1]: Finished Load/Save OS Random Seed.711buildbot # [ 8.025411] systemd[1]: Reached target First Boot Complete.712buildbot # [ 8.028496] systemd[1]: Finished Create Static Device Nodes in /dev gracefully.713buildbot # [ 8.032357] systemd[1]: Starting Create Static Device Nodes in /dev...714buildbot # [ 8.040329] systemd[1]: Finished Flush Journal to Persistent Storage.715buildbot # [ 8.114061] systemd[1]: Finished Create Static Device Nodes in /dev.716buildbot # [ 8.115070] systemd[1]: Reached target Preparation for Local File Systems.717buildbot # [ 8.117117] systemd[1]: Starting Rule-based Manager for Device Events and Files...718buildbot # [ 8.196462] systemd-udevd[308]: Using default interface naming scheme 'v260'.719buildbot # [ 8.317737] systemd[1]: Started Rule-based Manager for Device Events and Files.720buildbot # [ 8.378432] systemd[1]: Mounting /run/wrappers...721buildbot # [ 8.425247] systemd[1]: Mounted /run/wrappers.722buildbot # [ 8.426154] systemd[1]: Reached target Local File Systems.723buildbot # [ 8.429532] systemd[1]: Listening on Boot Loader Control Service Socket.724buildbot # [ 8.432060] systemd[1]: Starting register-nix-paths.service...725buildbot # [ 8.437235] systemd[1]: Starting Create SUID/SGID Wrappers...726buildbot # [ 8.440181] systemd[1]: Update Boot Loader Random Seed skipped, no trigger condition checks were met.727buildbot # [ 8.449329] systemd[1]: Starting Save Transient machine-id to Disk...728buildbot # [ 8.465606] systemd[1]: Starting Create System Files and Directories...729buildbot # [ 8.565220] systemd[1]: etc-machine\x2did.mount: Deactivated successfully.730buildbot # [ 8.576959] systemd[1]: Finished Save Transient machine-id to Disk.731buildbot # [ 8.648614] systemd[1]: Finished Create System Files and Directories.732buildbot # [ 8.661951] systemd[1]: Starting Rebuild Journal Catalog...733buildbot # [ 8.664636] systemd[1]: Starting Record System Boot/Shutdown in UTMP...734buildbot # [ 8.775482] systemd[1]: Finished Record System Boot/Shutdown in UTMP.735buildbot # [ 8.819264] systemd[1]: Finished Rebuild Journal Catalog.736buildbot # [ 8.829611] systemd[1]: Starting Update is Completed...737buildbot # [ 8.885752] systemd[1]: Finished Update is Completed.738buildbot # [ 9.288433] systemd[1]: suid-sgid-wrappers.service: Deactivated successfully.739buildbot # [ 9.293966] systemd[1]: Finished Create SUID/SGID Wrappers.740buildbot # [ 9.575956] systemd[1]: Finished Coldplug All udev Devices.741buildbot # [ 9.587531] systemd[1]: Finished register-nix-paths.service.742buildbot # [ 9.588820] systemd[1]: Reached target System Initialization.743buildbot # [ 9.589750] systemd[1]: Started Discard unused filesystem blocks once a week.744buildbot # [ 9.594692] systemd[1]: Started Daily Cleanup of Temporary Directories.745buildbot # [ 9.599836] systemd[1]: Reached target Timer Units.746buildbot # [ 9.600966] systemd[1]: Listening on D-Bus System Message Bus Socket.747buildbot # [ 9.604151] systemd[1]: Listening on Nix Daemon Socket.748buildbot # [ 9.607252] systemd[1]: Listening on OpenSSH Server Socket (systemd-ssh-generator, AF_UNIX Local).749buildbot # [ 9.611629] systemd[1]: Listening on Hostname Service Socket.750buildbot # [ 9.615117] systemd[1]: Listening on Virtual Machine and Container Registration Service Socket.751buildbot # [ 9.620262] systemd[1]: Reached target Socket Units.752buildbot # [ 9.622984] systemd[1]: Reached target Basic System.753buildbot # [ 9.623782] systemd[1]: Starting Import lastlog data into lastlog2 database...754buildbot # [ 9.628817] systemd[1]: Starting Name Service Cache Daemon (nsncd)...755buildbot # [ 9.631007] systemd[1]: Starting Post-Boot Actions...756buildbot # [ 9.636574] systemd[1]: Started Reset console on configuration changes.757buildbot # [ 9.658854] systemd[1]: Starting resolvconf update...758buildbot # [ 9.660831] systemd[1]: SSH Host Keys Generation skipped, no trigger condition checks were met.759buildbot # [ 9.694364] systemd[1]: Starting D-Bus System Message Bus...760buildbot # [ 9.700666] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs761buildbot # [ 9.744930] systemd[1]: Finished Post-Boot Actions.762buildbot # [ 9.774408] nsncd[395]: Oct 18 06:54:22.404 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"763buildbot # [ 9.785320] systemd[1]: Started Name Service Cache Daemon (nsncd).764buildbot # [ 9.790640] systemd[1]: Reached target Host and Network Name Lookups.765buildbot # [ 9.796111] systemd[1]: Reached target User and Group Name Lookups.766buildbot # [ 9.812215] systemd[1]: Starting User Login Management...767buildbot # [ 9.848465] systemd[1]: Finished Import lastlog data into lastlog2 database.768buildbot # [ 9.883562] dbus-broker-launch[400]: Looking up NSS user entry for 'systemd-timesync'...769buildbot # [ 9.907616] dbus-broker-launch[400]: NSS returned no entry for 'systemd-timesync'770buildbot # [ 9.913472] dbus-broker-launch[400]: Invalid user-name in /nix/store/6jpdsb3mdy2xmapsyva625wjhcy40gm4-system-path/share/dbus-1/system.d/org.freedesktop.timesync1.conf +16: user="systemd-timesync"771buildbot # [ 9.947709] systemd[1]: Started D-Bus System Message Bus.772buildbot # [ 9.989147] dbus-broker-launch[400]: Ready773buildbot # [ 9.993323] systemd-logind[416]: New seat seat0.774buildbot # [ 9.997892] systemd[1]: Started User Login Management.775buildbot # [ 10.006495] systemd[1]: Stopped target Host and Network Name Lookups.776buildbot # [ 10.010578] systemd[1]: Stopping Host and Network Name Lookups...777buildbot # [ 10.013799] systemd[1]: Stopped target User and Group Name Lookups.778buildbot # [ 10.019290] systemd[1]: Stopping User and Group Name Lookups...779buildbot # [ 10.023607] systemd[1]: Starting linger-users.service...780buildbot # [ 10.026727] systemd[1]: Stopping Name Service Cache Daemon (nsncd)...781buildbot # [ 10.030822] systemd[1]: nscd.service: Deactivated successfully.782buildbot # [ 10.035361] systemd[1]: Stopped Name Service Cache Daemon (nsncd).783buildbot # [ 10.061888] systemd[1]: Starting Name Service Cache Daemon (nsncd)...784buildbot # [ 10.108664] systemd[1]: linger-users.service: Deactivated successfully.785buildbot # [ 10.114938] systemd[1]: Finished linger-users.service.786buildbot # [ 10.136363] systemd[1]: Finished resolvconf update.787buildbot # [ 10.140780] systemd[1]: Condition check resulted in /dev/hvc0 being skipped.788buildbot # [ 10.145807] systemd[1]: Reached target Preparation for Network.789buildbot # [ 10.152793] nsncd[463]: Oct 18 06:54:22.785 INFO started, config: Config { ignored_request_types: {}, worker_count: 8, handoff_timeout: 10s }, path: "/var/run/nscd/socket"790buildbot # [ 10.159927] systemd[1]: Starting DHCP Client...791buildbot # [ 10.163262] systemd[1]: Starting Extra networking commands....792buildbot # [ 10.166913] systemd[1]: Started Name Service Cache Daemon (nsncd).793buildbot # [ 10.197818] systemd[1]: Reached target Host and Network Name Lookups.794buildbot # [ 10.201946] systemd[1]: Reached target User and Group Name Lookups.795buildbot # [ 10.240430] systemd[1]: Condition check resulted in /dev/ttyAMA0 being skipped.796buildbot # [ 10.247381] systemd[1]: Started backdoor.service.797buildbot # connecting to host...798buildbot: Guest shell says: b'Spawning backdoor root shell...\n'799buildbot: connected to guest root shell800buildbot: (connecting took 10.68 seconds)801buildbot: (finished: waiting for the VM to finish booting, in 11.11 seconds)802buildbot # [ 10.444925] dhcpcd[493]: dhcpcd-10.3.2 starting803buildbot # [ 10.465358] dhcpcd[536]: dev: loaded udev804buildbot # [ 10.526014] 8021q: 802.1Q VLAN Support v1.8805buildbot # [ 10.523985] systemd[1]: Finished Extra networking commands..806buildbot # [ 10.529729] systemd[1]: Reached target Network.807buildbot # [ 10.552466] systemd[1]: Starting Nginx Web Server...808buildbot # [ 10.574865] systemd[1]: Starting PostgreSQL Server...809buildbot # [ 10.601764] systemd[1]: Starting SSH Daemon...810buildbot # [ 10.626218] systemd[1]: Starting Permit User Sessions...811buildbot # [ 10.679413] cfg80211: Loading compiled-in X.509 certificates for regulatory database812buildbot # [ 10.710394] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'813buildbot # [ 10.713901] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'814buildbot # [ 10.717746] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2815buildbot # [ 10.718057] cfg80211: failed to load regulatory.db816buildbot # [ 10.715468] dhcpcd[536]: no valid interfaces found817buildbot # [ 10.718992] dhcpcd[536]: no valid interfaces found818buildbot # [ 10.757780] systemd[1]: Finished Permit User Sessions.819buildbot # [ 10.773243] systemd[1]: Started Getty on tty1.820buildbot # [ 10.773997] systemd[1]: Reached target Login Prompts.821buildbot # [ 10.783073] (udev-worker)[318]: eth1: Config file /etc/systemd/network/40-eth1.link is applied to device based on potentially unpredictable interface name.822buildbot # [ 10.800289] (udev-worker)[318]: Network interface NamePolicy= disabled on kernel command line.823buildbot # [ 10.801746] (udev-worker)[310]: Network interface NamePolicy= disabled on kernel command line.824buildbot # [ 10.823789] sshd[552]: Server listening on 0.0.0.0 port 22.825buildbot # [ 10.828905] systemd[1]: Started SSH Daemon.826buildbot # [ 10.829573] sshd[552]: Server listening on :: port 22.827buildbot # [ 10.834970] systemd[1]: Starting Setup git test repository with scheduled effects...828buildbot # [ 10.995366] setup-git-repo-start[575]: hint: Using 'master' as the name for the initial branch. This default branch name829buildbot # [ 11.001240] setup-git-repo-start[575]: hint: will change to "main" in Git 3.0. To configure the initial branch name830buildbot # [ 11.007957] setup-git-repo-start[575]: hint: to use in all of your new repositories, which will suppress this warning,831buildbot # [ 11.014825] setup-git-repo-start[575]: hint: call:832buildbot # [ 11.018661] setup-git-repo-start[575]: hint:833buildbot # [ 11.022227] setup-git-repo-start[575]: hint: git config --global init.defaultBranch <name>834buildbot # [ 11.028194] setup-git-repo-start[575]: hint:835buildbot # [ 11.030659] setup-git-repo-start[575]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and836buildbot # [ 11.037196] setup-git-repo-start[575]: hint: 'development'. The just-created branch can be renamed via this command:837buildbot # [ 11.038591] setup-git-repo-start[575]: hint:838buildbot # [ 11.039193] setup-git-repo-start[575]: hint: git branch -m <name>839buildbot # [ 11.050294] setup-git-repo-start[575]: hint:840buildbot # [ 11.050936] setup-git-repo-start[575]: hint: Disable this message with "git config set advice.defaultBranchName false"841buildbot # [ 11.060207] setup-git-repo-start[575]: Initialized empty Git repository in /srv/repos/test-flake.git/842buildbot # [ 11.065508] postgresql-pre-start[572]: The files belonging to this database system will be owned by user "postgres".843buildbot # [ 11.066922] postgresql-pre-start[572]: This user must also own the server process.844buildbot # [ 11.079309] postgresql-pre-start[572]: The database cluster will be initialized with locale "en_US.UTF-8".845buildbot # [ 11.084329] postgresql-pre-start[572]: The default database encoding has accordingly been set to "UTF8".846buildbot # [ 11.085652] postgresql-pre-start[572]: The default text search configuration will be set to "english".847buildbot # [ 11.086873] postgresql-pre-start[572]: Data page checksums are disabled.848buildbot # [ 11.087781] postgresql-pre-start[572]: fixing permissions on existing directory /var/lib/postgresql/17 ... ok849buildbot # [ 11.105043] postgresql-pre-start[572]: creating subdirectories ... ok850buildbot # [ 11.105946] postgresql-pre-start[572]: selecting dynamic shared memory implementation ... posix851buildbot # [ 11.107396] setup-git-repo-start[582]: hint: Using 'master' as the name for the initial branch. This default branch name852buildbot # [ 11.121721] setup-git-repo-start[582]: hint: will change to "main" in Git 3.0. To configure the initial branch name853buildbot # [ 11.123086] setup-git-repo-start[582]: hint: to use in all of your new repositories, which will suppress this warning,854buildbot # [ 11.131749] setup-git-repo-start[582]: hint: call:855buildbot # [ 11.135692] setup-git-repo-start[582]: hint:856buildbot # [ 11.141233] setup-git-repo-start[582]: hint: git config --global init.defaultBranch <name>857buildbot # [ 11.144363] setup-git-repo-start[582]: hint:858buildbot # [ 11.149080] setup-git-repo-start[582]: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and859buildbot # [ 11.161672] setup-git-repo-start[582]: hint: 'development'. The just-created branch can be renamed via this command:860buildbot # [ 11.163075] setup-git-repo-start[582]: hint:861buildbot # [ 11.163667] setup-git-repo-start[582]: hint: git branch -m <name>862buildbot # [ 11.170456] setup-git-repo-start[582]: hint:863buildbot # [ 11.173527] setup-git-repo-start[582]: hint: Disable this message with "git config set advice.defaultBranchName false"864buildbot # [ 11.174909] setup-git-repo-start[582]: Initialized empty Git repository in /tmp/test-flake/.git/865buildbot # [ 11.188385] nginx-pre-start[570]: nginx: the configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf syntax is ok866buildbot # [ 11.196731] nginx-pre-start[570]: nginx: configuration file /nix/store/bm7s3vzhdx227qd96f2jvxccqg0nwb4d-nginx.conf test is successful867buildbot # [ 11.207243] systemd[1]: Started Nginx Web Server.868buildbot # [ 11.226077] setup-git-repo-start[593]: [master (root-commit) 40d170d] Initial commit with scheduled effects869buildbot # [ 11.227381] setup-git-repo-start[593]: 3 files changed, 131 insertions(+)870buildbot # [ 11.240640] setup-git-repo-start[593]: create mode 100644 effects-lib.nix871buildbot # [ 11.241704] setup-git-repo-start[593]: create mode 100644 flake.lock872buildbot # [ 11.242558] setup-git-repo-start[593]: create mode 100644 flake.nix873buildbot # [ 11.243685] systemd-logind[416]: Watching system buttons on /dev/input/event0 (gpio-keys)874buildbot # [ 11.260251] systemd[1]: Condition check resulted in Virtio network device being skipped.875buildbot # [ 11.267058] systemd[1]: Starting Address configuration of eth1...876buildbot # [ 11.346989] postgresql-pre-start[572]: selecting default "max_connections" ... 100877buildbot # [ 11.438922] setup-git-repo-start[598]: To /srv/repos/test-flake.git878buildbot # [ 11.439824] setup-git-repo-start[598]: * [new branch] master -> master879buildbot # [ 11.463364] 8021q: adding VLAN 0 to HW filter on device eth1880buildbot # [ 11.453087] setup-git-repo-start[598]: branch 'master' set up to track 'origin/master'.881buildbot # [ 11.462212] systemd[1]: Finished Setup git test repository with scheduled effects.882buildbot # [ 11.486145] 8021q: adding VLAN 0 to HW filter on device eth0883buildbot # [ 11.469355] dhcpcd[536]: eth0: waiting for carrier884buildbot # [ 11.470729] dhcpcd[536]: eth0: carrier acquired885buildbot # [ 11.480188] network-addresses-eth1-start[597]: adding address 192.168.1.1/24... done886buildbot # [ 11.498026] dhcpcd[536]: DUID 00:01:00:01:32:67:29:a0:52:54:00:12:34:56887buildbot # [ 11.508418] dhcpcd[536]: eth0: IAID 00:12:34:56888buildbot # [ 11.509149] dhcpcd[536]: eth0: adding address fe80::5054:ff:fe12:3456889buildbot # [ 11.512952] network-addresses-eth1-start[597]: adding address 2001:db8:1::1/64... done890buildbot # [ 11.536970] systemd[1]: Finished Address configuration of eth1.891buildbot # [ 11.539512] postgresql-pre-start[572]: selecting default "shared_buffers" ... 128MB892buildbot # [ 11.702974] mousedev: PS/2 mouse device common for all mice893buildbot # [ 11.734814] systemd-logind[416]: Watching system buttons on /dev/input/event1 (QEMU QEMU USB Keyboard)894buildbot # [ 11.767671] dhcpcd[536]: eth0: soliciting a DHCP lease895buildbot # [ 11.773609] dhcpcd[536]: eth0: offered 10.0.2.15 from 10.0.2.2896buildbot # [ 11.780555] dhcpcd[536]: eth0: probing address 10.0.2.15/24897buildbot: (finished: waiting for unit sshd.service, in 12.51 seconds)898buildbot: waiting for unit setup-git-repo.service899buildbot: (finished: waiting for unit setup-git-repo.service, in 0.09 seconds)900buildbot: waiting for unit multi-user.target901buildbot # [ 13.349438] input: QEMU Virtio Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:09.0/virtio8/input/input3902buildbot # [ 13.618086] postgresql-pre-start[572]: selecting default time zone ... UTC903buildbot # [ 13.625342] postgresql-pre-start[572]: creating configuration files ... ok904buildbot # [ 13.801472] dhcpcd[536]: eth0: soliciting an IPv6 router905buildbot # [ 13.802328] dhcpcd[536]: eth0: Router Advertisement from fe80::2906buildbot # [ 13.803156] dhcpcd[536]: eth0: adding address fec0::5054:ff:fe12:3456/64907buildbot # [ 13.809519] dhcpcd[536]: eth0: adding route to fec0::/64908buildbot # [ 13.810321] dhcpcd[536]: eth0: adding default route via fe80::2909buildbot # [ 13.933372] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.910buildbot # [ 13.984748] systemd[1]: Starting Virtual Console Setup...911buildbot # [ 14.036098] systemd[1]: systemd-vconsole-setup.service: Deactivated successfully.912buildbot # [ 14.037244] systemd[1]: Stopped Virtual Console Setup.913buildbot # [ 14.041417] systemd[1]: Starting Virtual Console Setup...914buildbot # [ 14.075184] systemd-logind[416]: Watching system buttons on /dev/input/event3 (QEMU Virtio Keyboard)915buildbot # [ 14.141029] postgresql-pre-start[572]: running bootstrap script ... ok916buildbot # [ 14.457521] systemd-vconsole-setup[673]: Configuration of first virtual console was skipped, ignoring remaining ones.917buildbot # [ 14.462386] systemd[1]: Finished Virtual Console Setup.918buildbot # [ 14.806958] postgresql-pre-start[572]: performing post-bootstrap initialization ... ok919buildbot # [ 14.929536] postgresql-pre-start[572]: syncing data to disk ... ok920buildbot # [ 14.931736] postgresql-pre-start[572]: initdb: warning: enabling "trust" authentication for local connections921buildbot # [ 14.933342] postgresql-pre-start[572]: initdb: hint: You can change this by editing pg_hba.conf or using the option -A, or --auth-local and --auth-host, the next time you run initdb.922buildbot # [ 14.935542] postgresql-pre-start[572]: Success. You can now start the database server using:923buildbot # [ 14.936870] postgresql-pre-start[572]: pg_ctl -D /var/lib/postgresql/17 -l logfile start924buildbot # [ 15.031413] postgres[691]: [691] LOG: starting PostgreSQL 17.10 on aarch64-unknown-linux-gnu, compiled by clang version 21.1.8, 64-bit925buildbot # [ 15.042036] postgres[691]: [691] LOG: listening on IPv6 address "::1", port 5432926buildbot # [ 15.043251] postgres[691]: [691] LOG: listening on IPv4 address "127.0.0.1", port 5432927buildbot # [ 15.044819] postgres[691]: [691] LOG: listening on Unix socket "/run/postgresql/.s.PGSQL.5432"928buildbot # [ 15.053826] postgres[697]: [697] LOG: database system was shut down at 2026-10-18 06:54:27 GMT929buildbot # [ 15.061281] postgres[691]: [691] LOG: database system is ready to accept connections930buildbot # [ 15.066184] systemd[1]: Started PostgreSQL Server.931buildbot # [ 15.070863] systemd[1]: Starting PostgreSQL Setup Scripts...932buildbot # [ 15.252455] postgresql-setup-start[713]: CREATE DATABASE933buildbot # [ 15.291047] postgresql-setup-start[718]: CREATE ROLE934buildbot # [ 15.308626] postgresql-setup-start[720]: ALTER DATABASE935buildbot # [ 15.314639] systemd[1]: Finished PostgreSQL Setup Scripts.936buildbot # [ 15.317822] systemd[1]: Reached target PostgreSQL.937buildbot # [ 15.319833] systemd[1]: Starting Buildbot Continuous Integration Server....938buildbot # [ 15.362193] buildbot-master-pre-start[725]: mkdir: created directory '/var/lib/buildbot/master'939buildbot # [ 16.734402] dhcpcd[536]: eth0: leased 10.0.2.15 for 86400 seconds940buildbot # [ 16.736139] dhcpcd[536]: eth0: adding route to 10.0.2.0/24941buildbot # [ 16.737429] dhcpcd[536]: eth0: adding default route via 10.0.2.2942buildbot # [ 16.873419] systemd[1]: Started DHCP Client.943buildbot # [ 19.641108] buildbot-master-pre-start[730]: updating existing installation944buildbot # [ 19.644156] buildbot-master-pre-start[730]: not touching existing buildbot.tac945buildbot # [ 19.645242] buildbot-master-pre-start[730]: creating buildbot.tac.new instead946buildbot # [ 19.646197] buildbot-master-pre-start[730]: creating /var/lib/buildbot/master/master.cfg.sample947buildbot # [ 19.647331] buildbot-master-pre-start[730]: creating database (postgresql://@/buildbot)948buildbot # [ 19.652121] buildbot-master-pre-start[730]: buildmaster configured in /var/lib/buildbot/master949buildbot # [ 20.062543] systemd[1]: Started Buildbot Continuous Integration Server..950buildbot # [ 20.068239] systemd[1]: Started Buildbot Worker..951buildbot # [ 20.071767] systemd[1]: Reached target Multi-User System.952buildbot # [ 20.072846] systemd[1]: Startup finished in 966ms (kernel) + 4.689s (initrd) + 14.416s (userspace) = 20.072s.953buildbot: (finished: waiting for unit multi-user.target, in 9.02 seconds)954subtest: Master and worker services start955buildbot: waiting for unit buildbot-master.service956buildbot: (finished: waiting for unit buildbot-master.service, in 0.09 seconds)957buildbot: waiting for unit buildbot-worker.service958buildbot: (finished: waiting for unit buildbot-worker.service, in 0.07 seconds)959buildbot: waiting for TCP port 8010 on localhost960buildbot # [ 21.544353] twistd[826]: Starting worker local-worker-000961buildbot # [ 21.544503] twistd[826]: 2026-10-18T06:54:33+0000 [-] Loading /nix/store/zxbh9svi0g0i80pg7z3gd6hmk17ck3yf-buildbot_nix/buildbot_nix/worker.py...962buildbot # [ 21.544577] twistd[826]: 2026-10-18T06:54:34+0000 [-] Loaded.963buildbot # [ 21.544644] twistd[826]: 2026-10-18T06:54:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up.964buildbot # [ 21.544676] twistd[826]: 2026-10-18T06:54:34+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.965buildbot # [ 21.544707] twistd[826]: 2026-10-18T06:54:34+0000 [-] Starting Worker -- version: 2026.06.28966buildbot # [ 21.544739] twistd[826]: 2026-10-18T06:54:34+0000 [-] recording hostname in twistd.hostname967buildbot # [ 21.556506] twistd[826]: 2026-10-18T06:54:34+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xe7d6ddb98590>968buildbot # [ 21.561592] twistd[826]: 2026-10-18T06:54:34+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 1 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xe7d6ddb98ad0> in 2.0413483070546246 seconds.969buildbot # [ 21.566911] twistd[826]: 2026-10-18T06:54:34+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xe7d6ddb98590>970buildbot # [ 23.009220] twistd[825]: 2026-10-18T06:54:33+0000 [-] Loading /var/lib/buildbot/master/buildbot.tac...971buildbot # [ 23.009378] twistd[825]: 2026-10-18T06:54:35+0000 [-] Loaded.972buildbot # [ 23.009414] twistd[825]: 2026-10-18T06:54:35+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] twistd 25.5.0 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13 3.13.13) starting up.973buildbot # [ 23.009445] twistd[825]: 2026-10-18T06:54:35+0000 [twisted.scripts._twistd_unix.UnixAppLogger#info] reactor class: twisted.internet.epollreactor.EPollReactor.974buildbot # [ 23.009476] twistd[825]: 2026-10-18T06:54:35+0000 [-] Starting BuildMaster -- buildbot.version: 4.3.0975buildbot # [ 23.023356] twistd[825]: 2026-10-18T06:54:35+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg'976buildbot # [ 23.605468] twistd[826]: 2026-10-18T06:54:36+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xe7d6ddb98590>977buildbot # [ 23.609203] twistd[826]: 2026-10-18T06:54:36+0000 [twisted.application._client_service.ClientService#info] Scheduling retry 2 to connect <twisted.internet.endpoints.TCP4ClientEndpoint object at 0xe7d6ddb98ad0> in 3.0588836016806886 seconds.978buildbot # [ 23.612271] twistd[826]: 2026-10-18T06:54:36+0000 [buildbot_worker.pb.BotFactory#info] Stopping factory <buildbot_worker.pb.BotFactory object at 0xe7d6ddb98590>979buildbot # [ 23.677002] twistd[825]: 2026-10-18T06:54:36+0000 [-] Setting up database with URL 'postgresql://@/buildbot'980buildbot # [ 23.775505] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 9 new builders, removing 0981buildbot # [ 23.916160] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 3 new services, removing 0982buildbot # [ 24.107599] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 1 new change_sources, removing 0983buildbot # [ 24.118891] twistd[825]: 2026-10-18T06:54:36+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'984buildbot # [ 24.136673] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 14 new schedulers, removing 0985buildbot # [ 24.352173] twistd[825]: 2026-10-18T06:54:36+0000 [-] BuildbotSite starting on 8010986buildbot # [ 24.355323] twistd[825]: 2026-10-18T06:54:36+0000 [buildbot.www.service.BuildbotSite#info] Starting factory <buildbot.www.service.BuildbotSite object at 0xe53eb860c980>987buildbot # [ 24.357830] twistd[825]: 2026-10-18T06:54:36+0000 [-] adding 5 new workers, removing 0988buildbot # [ 24.368440] twistd[825]: 2026-10-18T06:54:37+0000 [-] PBServerFactory starting on 9989989buildbot # [ 24.371747] twistd[825]: 2026-10-18T06:54:37+0000 [twisted.spread.pb.PBServerFactory#info] Starting factory <twisted.spread.pb.PBServerFactory object at 0xe53eb860d400>990buildbot # [ 24.426497] twistd[825]: 2026-10-18T06:54:37+0000 [-] Starting Worker -- version: 2026.06.28991buildbot # [ 24.428239] twistd[825]: 2026-10-18T06:54:37+0000 [-] recording hostname in twistd.hostname992buildbot # [ 24.431554] twistd[825]: 2026-10-18T06:54:37+0000 [-] message from master: attached993buildbot # [ 24.436710] sshd-session[883]: Accepted publickey for root from ::1 port 55446 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW8994buildbot # [ 24.440614] twistd[825]: 2026-10-18T06:54:37+0000 [-] Got workerinfo from '__Janitor'995buildbot # [ 24.447324] twistd[825]: 2026-10-18T06:54:37+0000 [-] bot attached996buildbot # [ 24.448955] twistd[825]: 2026-10-18T06:54:37+0000 [-] Worker __Janitor attached to __Janitor997buildbot # [ 24.451952] twistd[825]: 2026-10-18T06:54:37+0000 [-] message from master: attached998buildbot # [ 24.456300] sshd-session[883]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)999buildbot # [ 24.504372] twistd[825]: 2026-10-18T06:54:37+0000 [-] BuildMaster is running1000buildbot # [ 24.515095] systemd[1]: Created slice Slice /user/0.1001buildbot # [ 24.520173] systemd[1]: Starting User Runtime Directory /run/user/0...1002buildbot # [ 24.546220] systemd-logind[416]: New session '1' of user 'root' with class 'user' and type 'tty'.1003buildbot # [ 24.568485] systemd[1]: Finished User Runtime Directory /run/user/0.1004buildbot # [ 24.574158] systemd[1]: Starting User Manager for UID 0...1005buildbot # [ 24.608775] (systemd)[893]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)1006buildbot # [ 24.615081] systemd-logind[416]: New session '2' of user 'root' with class 'manager-early' and type 'unspecified'.1007buildbot # [ 24.903900] systemd[893]: Queued start job for default target Main User Target.1008buildbot # [ 24.913961] systemd[893]: Created slice User Application Slice.1009buildbot # [ 24.914991] systemd[893]: Started Daily Cleanup of User's Temporary Directories.1010buildbot # [ 24.916140] systemd[893]: Reached target Paths.1011buildbot # [ 24.917129] systemd[893]: Reached target Timers.1012buildbot # [ 24.920060] systemd[893]: Starting D-Bus User Message Bus Socket...1013buildbot # [ 24.923286] systemd[893]: Starting Create User Files and Directories...1014buildbot # [ 25.022156] systemd[893]: Finished Create User Files and Directories.1015buildbot # [ 25.062095] systemd[893]: Listening on D-Bus User Message Bus Socket.1016buildbot # [ 25.064874] systemd[893]: Reached target Sockets.1017buildbot # [ 25.065691] systemd[893]: Reached target Basic System.1018buildbot # [ 25.066505] systemd[893]: Run user-specific NixOS activation skipped, unmet condition check ConditionUser=!@system1019buildbot # [ 25.069967] systemd[893]: Reached target Main User Target.1020buildbot # [ 25.070838] systemd[893]: Startup finished in 430ms.1021buildbot # [ 25.071627] systemd[1]: Started User Manager for UID 0.1022buildbot # [ 25.074694] systemd[1]: Started Session 1 of User root.1023buildbot # [ 25.103472] sshd-session[905]: Received disconnect from ::1 port 55446:11: disconnected by user1024buildbot # [ 25.107221] sshd-session[905]: Disconnected from user root ::1 port 554461025buildbot # [ 25.116337] sshd-session[883]: pam_unix(sshd:session): session closed for user root1026buildbot # [ 25.117514] systemd[1]: session-1.scope: Deactivated successfully.1027buildbot # [ 25.121391] systemd-logind[416]: Session 1 logged out. Waiting for processes to exit.1028buildbot # [ 25.122545] systemd-logind[416]: Removed session 1.1029buildbot # [ 25.290834] sshd-session[910]: Accepted publickey for root from ::1 port 55450 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81030buildbot # [ 25.303750] sshd-session[910]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1031buildbot # [ 25.318121] systemd-logind[416]: New session '3' of user 'root' with class 'user' and type 'tty'.1032buildbot # [ 25.325013] systemd[1]: Started Session 3 of User root.1033buildbot # [ 25.381348] sshd-session[916]: Received disconnect from ::1 port 55450:11: disconnected by user1034buildbot # [ 25.382668] sshd-session[916]: Disconnected from user root ::1 port 554501035buildbot # [ 25.383571] sshd-session[910]: pam_unix(sshd:session): session closed for user root1036buildbot # Connection to localhost (127.0.0.1) 8010 port [tcp/*] succeeded!1037buildbot # [ 25.396310] systemd[1]: session-3.scope: Deactivated successfully.1038buildbot # [ 25.399391] systemd-logind[416]: Session 3 logged out. Waiting for processes to exit.1039buildbot # [ 25.401957] systemd-logind[416]: Removed session 3.1040buildbot: (finished: waiting for TCP port 8010 on localhost, in 4.31 seconds)1041buildbot: waiting for success: curl --fail --head http://localhost:80101042buildbot # [ 25.436311] twistd[825]: 2026-10-18T06:54:38+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1043buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1044buildbot # Dload Upload Total Spent Left Speed1045buildbot # 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 01046buildbot: (finished: waiting for success: curl --fail --head http://localhost:8010, in 0.10 seconds)1047(finished: subtest: Master and worker services start, in 4.58 seconds)1048subtest: Project is registered1049buildbot: waiting for success: curl http://localhost:8010/api/v2/projects1050buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1051buildbot # Dload Upload Total Spent Left Speed1052buildbot # 0 0 0 0 0 0 0 0 0100 266 100 266 0 0 20682 0 0100 266 100 266 0 0 17057 0 0100 266 100 266 0 0 14679 0 01053buildbot: (finished: waiting for success: curl http://localhost:8010/api/v2/projects, in 0.06 seconds)1054(finished: subtest: Project is registered, in 0.06 seconds)1055subtest: CLI list-schedules works1056buildbot: must succeed: 1057 cd /tmp/test-flake1058 buildbot-effects list-schedules1059 1060buildbot: (finished: must succeed: 1061 cd /tmp/test-flake1062 buildbot-effects list-schedules1063 , in 0.33 seconds)1064(finished: subtest: CLI list-schedules works, in 0.33 seconds)1065subtest: Push a new commit to trigger build1066buildbot: must succeed: 1067 cd /tmp/test-flake1068 echo "# trigger rebuild" >> flake.nix1069 git add flake.nix1070 git commit -m "Trigger build"1071 git push origin master1072 1073buildbot # Enumerating objects: 5, done.1074buildbot # Counting objects: 20% (1/5)Counting objects: 40% (2/5)Counting objects: 60% (3/5)Counting objects: 80% (4/5)Counting objects: 100% (5/5)Counting objects: 100% (5/5), done.1075buildbot # Compressing objects: 33% (1/3)Compressing objects: 66% (2/3)Compressing objects: 100% (3/3)Compressing objects: 100% (3/3), done.1076buildbot # Writing objects: 33% (1/3)Writing objects: 66% (2/3)Writing objects: 100% (3/3)Writing objects: 100% (3/3), 296 bytes | 148.00 KiB/s, done.1077buildbot # Total 3 (delta 2), reused 0 (delta 0), pack-reused 0 (from 0)1078buildbot # To /srv/repos/test-flake.git1079buildbot # 40d170d..df12c5e master -> master1080buildbot: (finished: must succeed: 1081 cd /tmp/test-flake1082 echo "# trigger rebuild" >> flake.nix1083 git add flake.nix1084 git commit -m "Trigger build"1085 git push origin master1086 , in 0.09 seconds)1087(finished: subtest: Push a new commit to trigger build, in 0.09 seconds)1088subtest: Wait for nix-eval build to complete1089buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1090buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1091buildbot # Dload Upload Total Spent Left Speed1092buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3175 0 0100 51 100 51 0 0 2738 0 0100 51 100 51 0 0 2372 0 01093buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.06 seconds)1094buildbot # [ 26.672850] twistd[826]: 2026-10-18T06:54:39+0000 [buildbot_worker.pb.BotFactory#info] Starting factory <buildbot_worker.pb.BotFactory object at 0xe7d6ddb98590>1095buildbot # [ 26.683446] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] worker 'local-worker-000' attaching from IPv4Address(type='TCP', host='127.0.0.1', port=34002)1096buildbot # [ 26.688970] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1097buildbot # [ 26.695916] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Got workerinfo from 'local-worker-000'1098buildbot # [ 26.716085] twistd[825]: 2026-10-18T06:54:39+0000 [-] bot attached1099buildbot # [ 26.719989] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-failed-eval1100buildbot # [ 26.722523] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-effect1101buildbot # [ 26.729316] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-build1102buildbot # [ 26.731736] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-cached-failure1103buildbot # [ 26.760303] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-eval1104buildbot # [ 26.762248] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-register-gcroot1105buildbot # [ 26.804330] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/nix-dependency-failed1106buildbot # [ 26.806100] twistd[825]: 2026-10-18T06:54:39+0000 [Broker,0,127.0.0.1] Worker local-worker-000 attached to test-flake/run-scheduled-effect1107buildbot # [ 26.807736] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1108buildbot # [ 26.835681] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1109buildbot # [ 26.845655] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1110buildbot # [ 26.846870] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1111buildbot # [ 26.868283] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1112buildbot # [ 26.869577] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1113buildbot # [ 26.870727] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1114buildbot # [ 26.871872] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] message from master: attached1115buildbot # [ 26.895018] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] Connected to buildmaster; worker is ready1116buildbot # [ 26.899020] twistd[826]: 2026-10-18T06:54:39+0000 [Broker,client] sending application-level keepalives every 600 seconds1117buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1118buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1119buildbot # Dload Upload Total Spent Left Speed1120buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2874 0 0100 51 100 51 0 0 2356 0 0100 51 100 51 0 0 1982 0 01121buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1122buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1123buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1124buildbot # Dload Upload Total Spent Left Speed1125buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4088 0 0100 51 100 51 0 0 3058 0 0100 51 100 51 0 0 2470 0 01126buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1127buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1128buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1129buildbot # Dload Upload Total Spent Left Speed1130buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4928 0 0100 51 100 51 0 0 3543 0 0100 51 100 51 0 0 2769 0 01131buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1132buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1133buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1134buildbot # Dload Upload Total Spent Left Speed1135buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2901 0 0100 51 100 51 0 0 2366 0 0100 51 100 51 0 0 1993 0 01136buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1137buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1138buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1139buildbot # Dload Upload Total Spent Left Speed1140buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4690 0 0100 51 100 51 0 0 3303 0 0100 51 100 51 0 0 2621 0 01141buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1142buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1143buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1144buildbot # Dload Upload Total Spent Left Speed1145buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 5194 0 0100 51 100 51 0 0 3556 0 0100 51 100 51 0 0 2797 0 01146buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1147buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1148buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1149buildbot # Dload Upload Total Spent Left Speed1150buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4571 0 0100 51 100 51 0 0 3330 0 0100 51 100 51 0 0 2651 0 01151buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1152buildbot # [ 34.330879] sshd-session[1001]: Accepted publickey for root from ::1 port 59718 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81153buildbot # [ 34.343607] sshd-session[1001]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1154buildbot # [ 34.357374] systemd-logind[416]: New session '4' of user 'root' with class 'user' and type 'tty'.1155buildbot # [ 34.367277] systemd[1]: Started Session 4 of User root.1156buildbot # [ 34.399727] sshd-session[1004]: Received disconnect from ::1 port 59718:11: disconnected by user1157buildbot # [ 34.410242] sshd-session[1004]: Disconnected from user root ::1 port 597181158buildbot # [ 34.411697] sshd-session[1001]: pam_unix(sshd:session): session closed for user root1159buildbot # [ 34.416466] systemd[1]: session-4.scope: Deactivated successfully.1160buildbot # [ 34.423627] systemd-logind[416]: Session 4 logged out. Waiting for processes to exit.1161buildbot # [ 34.428196] systemd-logind[416]: Removed session 4.1162buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1163buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1164buildbot # Dload Upload Total Spent Left Speed1165buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2417 0 0100 51 100 51 0 0 2096 0 0100 51 100 51 0 0 1796 0 01166buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1167buildbot # [ 34.617032] sshd-session[1009]: Accepted publickey for root from ::1 port 59734 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81168buildbot # [ 34.625696] sshd-session[1009]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1169buildbot # [ 34.635179] systemd-logind[416]: New session '5' of user 'root' with class 'user' and type 'tty'.1170buildbot # [ 34.640389] systemd[1]: Started Session 5 of User root.1171buildbot # [ 34.675499] sshd-session[1015]: Received disconnect from ::1 port 59734:11: disconnected by user1172buildbot # [ 34.679330] sshd-session[1015]: Disconnected from user root ::1 port 597341173buildbot # [ 34.683047] sshd-session[1009]: pam_unix(sshd:session): session closed for user root1174buildbot # [ 34.689037] systemd[1]: session-5.scope: Deactivated successfully.1175buildbot # [ 34.689941] systemd-logind[416]: Session 5 logged out. Waiting for processes to exit.1176buildbot # [ 34.690998] systemd-logind[416]: Removed session 5.1177buildbot # [ 34.705099] twistd[825]: 2026-10-18T06:54:47+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1178buildbot # [ 34.740843] twistd[825]: 2026-10-18T06:54:47+0000 [-] gitpoller: processing 1 changes: ['df12c5e337ee8400e459ef8b0787a73f30b1ce4b'] from "ssh://root@localhost/srv/repos/test-flake.git" branch "refs/heads/master"1179buildbot # [ 34.844196] twistd[825]: 2026-10-18T06:54:47+0000 [-] added change with revision df12c5e337ee8400e459ef8b0787a73f30b1ce4b to database1180buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1181buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1182buildbot # Dload Upload Total Spent Left Speed1183buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4540 0 0100 51 100 51 0 0 3321 0 0100 51 100 51 0 0 2655 0 01184buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1185buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1186buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1187buildbot # Dload Upload Total Spent Left Speed1188buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2785 0 0100 51 100 51 0 0 2291 0 0100 51 100 51 0 0 1960 0 01189buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1190buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1191buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1192buildbot # Dload Upload Total Spent Left Speed1193buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 4516 0 0100 51 100 51 0 0 3201 0 0100 51 100 51 0 0 2570 0 01194buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1195buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1196buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1197buildbot # Dload Upload Total Spent Left Speed1198buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 2943 0 0100 51 100 51 0 0 2340 0 0100 51 100 51 0 0 1980 0 01199buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1200buildbot # [ 39.883595] twistd[825]: 2026-10-18T06:54:52+0000 [-] added buildset 1 to database1201buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1202buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1203buildbot # Dload Upload Total Spent Left Speed1204buildbot # 0 0 0 0 0 0 0 0 0100 51 100 51 0 0 3531 0 0100 51 100 51 0 0 2895 0 0100 51 100 51 0 0 2482 0 01205buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.07 seconds)1206buildbot # [ 40.021572] twistd[825]: 2026-10-18T06:54:52+0000 [-] starting build <Build test-flake/nix-eval number:None results:success> using worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=AVAILABLE>1207buildbot # [ 40.030030] twistd[825]: 2026-10-18T06:54:52+0000 [-] <Build test-flake/nix-eval number:None results:success>.startBuild1208buildbot # [ 40.085600] twistd[825]: 2026-10-18T06:54:52+0000 [-] acquireLocks(worker <Worker 'local-worker-000'>, locks [])1209buildbot # [ 40.091165] twistd[825]: 2026-10-18T06:54:52+0000 [-] starting build <Build test-flake/nix-eval number:1 results:success>.. pinging the worker <WorkerForBuilder builder='test-flake/nix-eval' worker='local-worker-000' state=BUILDING>1210buildbot # [ 40.095347] twistd[825]: 2026-10-18T06:54:52+0000 [-] sending ping1211buildbot # [ 40.098627] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] ping finished: success1212buildbot # [ 40.101160] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] message from master: ping1213buildbot # [ 40.120712] twistd[825]: 2026-10-18T06:54:52+0000 [-] <RemoteShellCommand '['git', '--version']'>: RemoteCommand.run [0]1214buildbot # [ 40.122229] twistd[825]: 2026-10-18T06:54:52+0000 [-] command '['git', '--version']' in dir 'build'1215buildbot # [ 40.132072] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 0): startCommand:shell1216buildbot # [ 40.133404] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): RunProcess._startCommand1217buildbot # [ 40.134865] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): git --version1218buildbot # [ 40.139312] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1219buildbot # [ 40.142369] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): watching logfiles {}1220buildbot # [ 40.144029] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): argv: [b'git', b'--version']1221buildbot # [ 40.145776] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command ['git', '--version']): using PTY: False1222buildbot # [ 40.154976] twistd[826]: 2026-10-18T06:54:52+0000 [-] (command ['git', '--version']): command finished with signal None, exit code 0, elapsedTime: 0.0280371223buildbot # [ 40.157885] twistd[826]: 2026-10-18T06:54:52+0000 [-] (command 0): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddb9aba0>1224buildbot # [ 40.181977] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '--version']'> rc=01225buildbot # [ 40.212808] twistd[825]: 2026-10-18T06:54:52+0000 [-] <RemoteCommand 'stat' at 252057543001152>: RemoteCommand.run [1]1226buildbot # [ 40.230425] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 1): startCommand:stat1227buildbot # [ 40.231698] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 1): StatFile /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched failed: [Errno 2] No such file or directory: '/var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build/.buildbot-patched'1228buildbot # [ 40.237449] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 1): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.StatFile object at 0xe7d6ddb99400>1229buildbot # [ 40.239694] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] <RemoteCommand 'stat' at 252057543001152> rc=21230buildbot # [ 40.248077] twistd[825]: 2026-10-18T06:54:52+0000 [-] <RemoteCommand 'mkdir' at 252057544587088>: RemoteCommand.run [2]1231buildbot # [ 40.274266] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 2): startCommand:mkdir1232buildbot # [ 40.275689] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 2): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.MakeDirectory object at 0xe7d6ddb99160>1233buildbot # [ 40.280738] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] <RemoteCommand 'mkdir' at 252057544587088> rc=01234buildbot # [ 40.286285] twistd[825]: 2026-10-18T06:54:52+0000 [-] <RemoteCommand 'downloadFile' at 252057544588048>: RemoteCommand.run [3]1235buildbot # [ 40.317218] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 3): startCommand:downloadFile1236buildbot # [ 40.321793] twistd[826]: 2026-10-18T06:54:52+0000 [Broker,client] (command 3): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.transfer.WorkerFileDownloadCommand object at 0xe7d6ddb981a0>1237buildbot # [ 40.330348] twistd[825]: 2026-10-18T06:54:52+0000 [Broker,0,127.0.0.1] <RemoteCommand 'downloadFile' at 252057544588048> rc=01238buildbot # [ 40.336469] twistd[825]: 2026-10-18T06:54:52+0000 [-] <RemoteCommand 'listdir' at 252057544588368>: RemoteCommand.run [4]1239buildbot # [ 40.369018] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 4): startCommand:listdir1240buildbot # [ 40.373659] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 4): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.ListDir object at 0xe7d6ddb992b0>1241buildbot # [ 40.380760] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] <RemoteCommand 'listdir' at 252057544588368> rc=01242buildbot # [ 40.388246] twistd[825]: 2026-10-18T06:54:53+0000 [-] No git repo present, making full clone1243buildbot # [ 40.390211] twistd[825]: 2026-10-18T06:54:53+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'>: RemoteCommand.run [5]1244buildbot # [ 40.396834] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']' in dir 'build'1245buildbot # [ 40.421555] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 5): startCommand:shell1246buildbot # [ 40.427272] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): RunProcess._startCommand1247buildbot # [ 40.441312] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' clone --branch master ssh://root@localhost/srv/repos/test-flake.git . --progress1248buildbot # [ 40.464123] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1249buildbot # [ 40.471568] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): watching logfiles {}1250buildbot # [ 40.478062] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'clone', b'--branch', b'master', b'ssh://root@localhost/srv/repos/test-flake.git', b'.', b'--progress']1251buildbot # [ 40.488085] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): using PTY: False1252buildbot # [ 40.663004] sshd-session[1051]: Accepted publickey for root from ::1 port 59742 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81253buildbot # [ 40.679370] sshd-session[1051]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1254buildbot # [ 40.696396] systemd-logind[416]: New session '6' of user 'root' with class 'user' and type 'tty'.1255buildbot # [ 40.706846] systemd[1]: Started Session 6 of User root.1256buildbot # [ 40.771888] sshd-session[1054]: Received disconnect from ::1 port 59742:11: disconnected by user1257buildbot # [ 40.781030] sshd-session[1054]: Disconnected from user root ::1 port 597421258buildbot # [ 40.782049] systemd[1]: session-6.scope: Deactivated successfully.1259buildbot # [ 40.782921] sshd-session[1051]: pam_unix(sshd:session): session closed for user root1260buildbot # [ 40.783954] systemd-logind[416]: Session 6 logged out. Waiting for processes to exit.1261buildbot # [ 40.789220] systemd-logind[416]: Removed session 6.1262buildbot # [ 40.803226] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']): command finished with signal None, exit code 0, elapsedTime: 0.3779521263buildbot # [ 40.815128] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 5): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddbb1090>1264buildbot # [ 40.819741] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'clone', '--branch', 'master', 'ssh://root@localhost/srv/repos/test-flake.git', '.', '--progress']'> rc=01265buildbot # [ 40.861233] twistd[825]: 2026-10-18T06:54:53+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']'>: RemoteCommand.run [6]1266buildbot # [ 40.870339] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']' in dir 'build'1267buildbot # [ 40.874122] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 6): startCommand:shell1268buildbot # [ 40.878033] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): RunProcess._startCommand1269buildbot # [ 40.881811] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' checkout -f df12c5e337ee8400e459ef8b0787a73f30b1ce4b1270buildbot # [ 40.887608] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1271buildbot # [ 40.892387] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): watching logfiles {}1272buildbot # [ 40.896976] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'checkout', b'-f', b'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']1273buildbot # [ 40.902907] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): using PTY: False1274buildbot # [ 40.916061] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']): command finished with signal None, exit code 0, elapsedTime: 0.0562501275buildbot # [ 40.919884] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 6): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddbb1450>1276buildbot # [ 40.928517] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'checkout', '-f', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b']'> rc=01277buildbot # [ 40.948052] twistd[825]: 2026-10-18T06:54:53+0000 [-] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'>: RemoteCommand.run [7]1278buildbot # [ 40.951431] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']' in dir 'build'1279buildbot # [ 40.969132] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 7): startCommand:shell1280buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1281buildbot # [ 40.973073] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): RunProcess._startCommand1282buildbot # [ 40.982924] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): git -c 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"' submodule update --init --recursive1283buildbot # [ 40.988196] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1284buildbot # [ 40.995422] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): watching logfiles {}1285buildbot # [ 41.000864] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): argv: [b'git', b'-c', b'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', b'submodule', b'update', b'--init', b'--recursive']1286buildbot # [ 41.007416] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): using PTY: False1287buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1288buildbot # Dload Upload Total Spent Left Speed1289buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 16213 0 0100 401 100 401 0 0 14364 0 0100 401 100 401 0 0 10903 0 01290buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.13 seconds)1291buildbot # [ 41.136603] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']): command finished with signal None, exit code 0, elapsedTime: 0.1636611292buildbot # [ 41.144433] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 7): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddb56520>1293buildbot # [ 41.148046] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', '-c', 'core.sshCommand=ssh -o "BatchMode=yes" -i "/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot/ssh-key"', 'submodule', 'update', '--init', '--recursive']'> rc=01294buildbot # [ 41.162722] twistd[825]: 2026-10-18T06:54:53+0000 [-] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'>: RemoteCommand.run [8]1295buildbot # [ 41.164352] twistd[825]: 2026-10-18T06:54:53+0000 [-] command '['git', 'rev-parse', 'HEAD']' in dir 'build'1296buildbot # [ 41.185152] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 8): startCommand:shell1297buildbot # [ 41.189323] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): RunProcess._startCommand1298buildbot # [ 41.190923] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): git rev-parse HEAD1299buildbot # [ 41.197660] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1300buildbot # [ 41.199947] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): watching logfiles {}1301buildbot # [ 41.202048] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): argv: [b'git', b'rev-parse', b'HEAD']1302buildbot # [ 41.203990] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['git', 'rev-parse', 'HEAD']): using PTY: False1303buildbot # [ 41.213428] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['git', 'rev-parse', 'HEAD']): command finished with signal None, exit code 0, elapsedTime: 0.0250571304buildbot # [ 41.215392] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 8): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddb56650>1305buildbot # [ 41.242771] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['git', 'rev-parse', 'HEAD']'> rc=01306buildbot # [ 41.264116] twistd[825]: 2026-10-18T06:54:53+0000 [-] Got Git revision df12c5e337ee8400e459ef8b0787a73f30b1ce4b1307buildbot # [ 41.265675] twistd[825]: 2026-10-18T06:54:53+0000 [-] <RemoteCommand 'rmdir' at 252057544589008>: RemoteCommand.run [9]1308buildbot # [ 41.287605] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command 9): startCommand:rmdir1309buildbot # [ 41.292118] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): RunProcess._startCommand1310buildbot # [ 41.294709] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): rm -rf /var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot1311buildbot # [ 41.301225] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): in dir /var/lib/buildbot-worker/worker-000 (timeout 120 secs)1312buildbot # [ 41.304650] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): watching logfiles {}1313buildbot # [ 41.307346] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): argv: [b'rm', b'-rf', b'/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']1314buildbot # [ 41.312450] twistd[826]: 2026-10-18T06:54:53+0000 [Broker,client] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): using PTY: False1315buildbot # [ 41.323647] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command ['rm', '-rf', '/var/lib/buildbot-worker/worker-000/.test-flake_nix-eval.build.buildbot']): command finished with signal None, exit code 0, elapsedTime: 0.0369061316buildbot # [ 41.326858] twistd[826]: 2026-10-18T06:54:53+0000 [-] (command 9): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.fs.RemoveDirectory object at 0xe7d6ddb9b0e0>1317buildbot # [ 41.341730] twistd[825]: 2026-10-18T06:54:53+0000 [Broker,0,127.0.0.1] <RemoteCommand 'rmdir' at 252057544589008> rc=01318buildbot # [ 41.365226] twistd[825]: 2026-10-18T06:54:53+0000 [-] releaseLocks(GitLocalPrMerge(default_branch='master', repourl=Interpolate('ssh://root@localhost/srv/repos/test-flake.git'), method='clean', submodules=True, haltOnFailure=True, logEnviron=False, sshPrivateKey='-----BEGIN OPENSSH PRIVATE KEY-----\nb3BlbnNzaC1rZXktdjEAAAAABG5vbmUAAAAEbm9uZQAAAAAAAAABAAAAMwAAAAtzc2gtZW\nQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1wAAAJhFK1T9RStU\n/QAAAAtzc2gtZWQyNTUxOQAAACBG+sEWLfMtuYxA4kvzcEgx8GkX6r7zt+hLnsiedIyX1w\nAAAED1I5G8QWiUPUYhutClVIyCYqRZ3MYUj90NtABLcaSPZkb6wRYt8y25jEDiS/NwSDHw\naRfqvvO36EueyJ50jJfXAAAADnRlc3RAbG9jYWxob3N0AQIDBAUGBw==\n-----END OPENSSH PRIVATE KEY-----\n', sshKnownHosts=None)): []1319buildbot # [ 41.388180] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'git' complete: success (None)1320buildbot # [ 41.396853] twistd[825]: 2026-10-18T06:54:54+0000 [-] acquireLocks(step NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xe53ebabd92b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xe53ebabda660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False), locks [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xe53ebabda660>)])1321buildbot # [ 41.416063] twistd[825]: 2026-10-18T06:54:54+0000 [-] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'>: RemoteCommand.run [10]1322buildbot # [ 41.418205] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']' in dir 'build'1323buildbot # [ 41.427071] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 10): startCommand:shell1324buildbot # [ 41.430527] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): RunProcess._startCommand1325buildbot # [ 41.433077] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): sh -c 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi'1326buildbot # [ 41.435923] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1327buildbot # [ 41.439294] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): watching logfiles {}1328buildbot # [ 41.441787] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): argv: [b'sh', b'-c', b'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']1329buildbot # [ 41.444943] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): using PTY: False1330buildbot # [ 41.458561] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command ['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']): command finished with signal None, exit code 0, elapsedTime: 0.0357931331buildbot # [ 41.461227] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command 10): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6de1e7e30>1332buildbot # [ 41.472928] twistd[825]: 2026-10-18T06:54:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['sh', '-c', 'if [ -f buildbot-nix.toml ]; then cat buildbot-nix.toml; fi']'> rc=01333buildbot # [ 41.479174] twistd[825]: 2026-10-18T06:54:54+0000 [-] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'>: RemoteCommand.run [11]1334buildbot # [ 41.484107] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']' in dir 'build'1335buildbot # [ 41.521596] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 11): startCommand:shell1336buildbot # [ 41.526122] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): RunProcess._startCommand1337buildbot # [ 41.539137] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): nix-eval-jobs --option eval-cache false --workers 1 --max-memory-size 2048 --option accept-flake-config true --gc-roots-dir /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/ --force-recurse --check-cache-status --flake '.#checks'1338buildbot # [ 41.548901] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1339buildbot # [ 41.555818] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): watching logfiles {}1340buildbot # [ 41.562076] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): argv: [b'nix-eval-jobs', b'--option', b'eval-cache', b'false', b'--workers', b'1', b'--max-memory-size', b'2048', b'--option', b'accept-flake-config', b'true', b'--gc-roots-dir', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', b'--force-recurse', b'--check-cache-status', b'--flake', b'.#checks']1341buildbot # [ 41.572003] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): using PTY: False1342buildbot # [ 41.677502] systemd[1]: Started Nix Daemon.1343buildbot # [ 41.763274] nix-daemon[1100]: accepted connection from pid 1099, user buildbot-worker1344buildbot # [ 41.789182] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command ['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']): command finished with signal None, exit code 0, elapsedTime: 0.2646711345buildbot # [ 41.799512] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command 11): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddbb8af0>1346buildbot # [ 41.802715] twistd[825]: 2026-10-18T06:54:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['nix-eval-jobs', '--option', 'eval-cache', 'false', '--workers', '1', '--max-memory-size', '2048', '--option', 'accept-flake-config', 'true', '--gc-roots-dir', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/', '--force-recurse', '--check-cache-status', '--flake', '.#checks']'> rc=01347buildbot # [ 41.830511] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(NixEvalCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, env={'CLICOLOR_FORCE': '1'}, name='Evaluate flake', nix_eval_config=NixEvalConfig(supported_systems=['aarch64-linux'], failed_build_report_limit=47, worker_count=1, max_memory_size=2048, eval_lock=<buildbot.locks.MasterLock object at 0xe53ebabd92b0>, gcroots_user='buildbot-worker', cache_failed_builds=False, show_trace=False), haltOnFailure=True, locks=[<buildbot.locks.LockAccess object at 0xe53ebabda660>], drv_gcroots_dir=Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/'), logEnviron=False)): [(<MasterLock(nix-eval, 1)>, <buildbot.locks.LockAccess object at 0xe53ebabda660>)]1348buildbot # [ 41.845402] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'Evaluate flake' complete: success (None)1349buildbot # [ 41.871063] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(BuildTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, trigger_config=TriggerConfig(builds_scheduler='test-flake-nix-build', failed_eval_scheduler='test-flake-nix-failed-eval', dependency_failed_scheduler='test-flake-nix-dependency-failed', cached_failure_scheduler='test-flake-nix-cached-failure'), jobs_config=JobsConfig(successful_jobs=[], failed_jobs=[], cache_failed_builds=False, failed_build_report_limit=47), nix_attr_prefix='checks', name='build flake')): []1350buildbot # [ 41.883202] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'build flake' complete: success (None)1351buildbot # [ 41.895917] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(ProcessSkippedBuilds(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, gcroots_user='buildbot-worker', branch_config={}, outputs_path=None, name='Process skipped builds', doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe53ebac30c20>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe53ebac30cc0>)): []1352buildbot # [ 41.904916] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'Process skipped builds' complete: skipped (None)1353buildbot # [ 41.921940] twistd[825]: 2026-10-18T06:54:54+0000 [-] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'>: RemoteCommand.run [12]1354buildbot # [ 41.930848] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']' in dir 'build'1355buildbot # [ 41.934014] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 12): startCommand:shell1356buildbot # [ 41.935342] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): RunProcess._startCommand1357buildbot # [ 41.938171] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): rm -rf /nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/1358buildbot # [ 41.944204] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1359buildbot # [ 41.947164] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): watching logfiles {}1360buildbot # [ 41.949661] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): argv: [b'rm', b'-rf', b'/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']1361buildbot # [ 41.953371] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): using PTY: False1362buildbot # [ 41.959710] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command ['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']): command finished with signal None, exit code 0, elapsedTime: 0.0390891363buildbot # [ 41.962607] twistd[826]: 2026-10-18T06:54:54+0000 [-] (command 12): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddbb8f30>1364buildbot # [ 41.974041] twistd[825]: 2026-10-18T06:54:54+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['rm', '-rf', '/nix/var/nix/gcroots/per-user/buildbot-worker/test-flake/drvs/local-worker-000/']'> rc=01365buildbot # [ 41.997504] twistd[825]: 2026-10-18T06:54:54+0000 [-] releaseLocks(ShellCommand(name='Cleanup drv paths', command=['rm', '-rf', Interpolate('/nix/var/nix/gcroots/per-user/buildbot-worker/%(prop:project)s/drvs/%(prop:workername)s/')], alwaysRun=True, logEnviron=False)): []1366buildbot # [ 42.006091] twistd[825]: 2026-10-18T06:54:54+0000 [-] step 'Cleanup drv paths' complete: success (None)1367buildbot # [ 42.018355] twistd[825]: 2026-10-18T06:54:54+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [13]1368buildbot # [ 42.028133] twistd[825]: 2026-10-18T06:54:54+0000 [-] command '['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1369buildbot # [ 42.030600] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command 13): startCommand:shell1370buildbot # [ 42.031799] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1371buildbot # [ 42.037700] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list --rev df12c5e337ee8400e459ef8b0787a73f30b1ce4b --branch master --repo test-flake1372buildbot # [ 42.041669] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1373buildbot # [ 42.045505] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1374buildbot # [ 42.048318] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list', b'--rev', b'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', b'--branch', b'master', b'--repo', b'test-flake']1375buildbot # [ 42.052557] twistd[826]: 2026-10-18T06:54:54+0000 [Broker,client] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1376buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1377buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1378buildbot # Dload Upload Total Spent Left Speed1379buildbot # 0 0 0 0 0 0 0 0 0100 401 100 401 0 0 20595 0 0100 401 100 401 0 0 14739 0 0100 401 100 401 0 0 11513 0 01380buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.10 seconds)1381buildbot # [ 42.331181] nix-daemon[1100]: accepted connection from pid 1112, user buildbot-worker1382buildbot # [ 42.370083] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command ['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.3462871383buildbot # [ 42.376811] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command 13): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddbc8550>1384buildbot # [ 42.379084] twistd[825]: 2026-10-18T06:54:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']'> rc=01385buildbot # [ 42.538261] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(BuildbotEffectsCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, env={}, name='Evaluate effects', command=['buildbot-effects', 'list', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe53ebac31440>, logEnviron=False)): []1386buildbot # [ 42.548711] twistd[825]: 2026-10-18T06:54:55+0000 [-] step 'Evaluate effects' complete: success (None)1387buildbot # [ 42.563534] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(BuildbotEffectsTrigger(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, effects_scheduler='test-flake-run-effect', name='Buildbot effect', effects=[])): []1388buildbot # [ 42.571006] twistd[825]: 2026-10-18T06:54:55+0000 [-] step 'Buildbot effect' complete: success (None)1389buildbot # [ 42.587621] twistd[825]: 2026-10-18T06:54:55+0000 [-] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']'>: RemoteCommand.run [14]1390buildbot # [ 42.596118] twistd[825]: 2026-10-18T06:54:55+0000 [-] command '['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']' in dir 'build'1391buildbot # [ 42.598741] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command 14): startCommand:shell1392buildbot # [ 42.599962] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): RunProcess._startCommand1393buildbot # [ 42.604577] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): buildbot-effects list-schedules --rev df12c5e337ee8400e459ef8b0787a73f30b1ce4b --branch master --repo test-flake1394buildbot # [ 42.608510] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): in dir /var/lib/buildbot-worker/worker-000/test-flake_nix-eval/build (timeout 1200 secs)1395buildbot # [ 42.612159] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): watching logfiles {}1396buildbot # [ 42.618169] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): argv: [b'buildbot-effects', b'list-schedules', b'--rev', b'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', b'--branch', b'master', b'--repo', b'test-flake']1397buildbot # [ 42.623037] twistd[826]: 2026-10-18T06:54:55+0000 [Broker,client] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): using PTY: False1398buildbot # [ 42.849609] nix-daemon[1100]: accepted connection from pid 1121, user buildbot-worker1399buildbot # [ 42.884209] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command ['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']): command finished with signal None, exit code 0, elapsedTime: 0.2986391400buildbot # [ 42.893480] twistd[826]: 2026-10-18T06:54:55+0000 [-] (command 14): ProtocolCommandBase.command_complete (success) <buildbot_worker.commands.shell.WorkerShellCommand object at 0xe7d6ddbc8850>1401buildbot # [ 42.895927] twistd[825]: 2026-10-18T06:54:55+0000 [Broker,0,127.0.0.1] <RemoteShellCommand '['buildbot-effects', 'list-schedules', '--rev', 'df12c5e337ee8400e459ef8b0787a73f30b1ce4b', '--branch', 'master', '--repo', 'test-flake']'> rc=01402buildbot # [ 42.932520] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(ScheduledEffectsEvaluateCommand(project=<buildbot_nix.pull_based.project.PullBasedProject object at 0xe53ebabd8d70>, schedules_cache_file='/var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json', env={}, name='Evaluate scheduled effects', command=['buildbot-effects', 'list-schedules', '--rev', Property(revision), '--branch', Property(branch), '--repo', Property(project)], flunkOnFailure=False, warnOnFailure=True, alwaysRun=True, doStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe53ebac31620>, hideStepIf=<function nix_eval_config.<locals>.<lambda> at 0xe53ebac316c0>, logEnviron=False)): []1403buildbot # [ 42.946536] twistd[825]: 2026-10-18T06:54:55+0000 [-] step 'Evaluate scheduled effects' complete: success (None)1404buildbot # [ 42.947970] twistd[825]: 2026-10-18T06:54:55+0000 [-] <Build test-flake/nix-eval number:1 results:success>: build finished1405buildbot # [ 42.964063] twistd[825]: 2026-10-18T06:54:55+0000 [-] releaseLocks(<Worker 'local-worker-000'>): []1406buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builds1407buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1408buildbot # Dload Upload Total Spent Left Speed1409buildbot # 0 0 0 0 0 0 0 0 0100 411 100 411 0 0 18981 0 0100 411 100 411 0 0 16333 0 0100 411 100 411 0 0 14496 0 01410buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builds, in 0.08 seconds)1411(finished: subtest: Wait for nix-eval build to complete, in 17.29 seconds)1412subtest: Schedule cache is created1413buildbot: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1414buildbot: (finished: waiting for success: test -f /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds)1415buildbot: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json1416buildbot: (finished: must succeed: cat /var/lib/buildbot/scheduled-effects-cache/test-flake-schedules.json, in 0.02 seconds)1417(finished: subtest: Schedule cache is created, in 0.04 seconds)1418subtest: Nightly schedulers are created1419buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1420buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1421buildbot # Dload Upload Total Spent Left Speed1422buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 54592 0 0100 3793 100 3793 0 0 52585 0 0100 3793 100 3793 0 0 50719 0 01423buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.11 seconds)1424buildbot # [ 44.326599] sshd-session[1156]: Accepted publickey for root from ::1 port 55986 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81425buildbot # [ 44.339276] sshd-session[1156]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1426buildbot # [ 44.352926] systemd-logind[416]: New session '7' of user 'root' with class 'user' and type 'tty'.1427buildbot # [ 44.357412] systemd[1]: Started Session 7 of User root.1428buildbot # [ 44.390059] sshd-session[1159]: Received disconnect from ::1 port 55986:11: disconnected by user1429buildbot # [ 44.394618] sshd-session[1159]: Disconnected from user root ::1 port 559861430buildbot # [ 44.406107] sshd-session[1156]: pam_unix(sshd:session): session closed for user root1431buildbot # [ 44.407570] systemd[1]: session-7.scope: Deactivated successfully.1432buildbot # [ 44.410531] systemd-logind[416]: Session 7 logged out. Waiting for processes to exit.1433buildbot # [ 44.411937] systemd-logind[416]: Removed session 7.1434buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1435buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1436buildbot # Dload Upload Total Spent Left Speed1437buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 44347 0 0100 3793 100 3793 0 0 41416 0 0100 3793 100 3793 0 0 40310 0 01438buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds)1439buildbot # [ 44.628655] sshd-session[1167]: Accepted publickey for root from ::1 port 55994 ssh2: ED25519 SHA256:9bQN408SyytfaJe89BgemJ/ksIKTwmKJks3tp9SgYW81440buildbot # [ 44.639669] sshd-session[1167]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)1441buildbot # [ 44.650138] systemd-logind[416]: New session '8' of user 'root' with class 'user' and type 'tty'.1442buildbot # [ 44.656972] systemd[1]: Started Session 8 of User root.1443buildbot # [ 44.689762] sshd-session[1176]: Received disconnect from ::1 port 55994:11: disconnected by user1444buildbot # [ 44.693783] sshd-session[1176]: Disconnected from user root ::1 port 559941445buildbot # [ 44.694775] sshd-session[1167]: pam_unix(sshd:session): session closed for user root1446buildbot # [ 44.697178] systemd[1]: session-8.scope: Deactivated successfully.1447buildbot # [ 44.701598] systemd-logind[416]: Session 8 logged out. Waiting for processes to exit.1448buildbot # [ 44.706376] systemd-logind[416]: Removed session 8.1449buildbot # [ 44.710334] twistd[825]: 2026-10-18T06:54:57+0000 [-] gitpoller: processing changes from "ssh://root@localhost/srv/repos/test-flake.git"1450buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1451buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1452buildbot # Dload Upload Total Spent Left Speed1453buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 38852 0 0100 3793 100 3793 0 0 37775 0 0100 3793 100 3793 0 0 36824 0 01454buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds)1455buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1456buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1457buildbot # Dload Upload Total Spent Left Speed1458buildbot # 0 0 0 0 0 0 0 0 0100 3793 100 3793 0 0 41190 0 0100 3793 100 3793 0 0 40066 0 0100 3793 100 3793 0 0 38956 0 01459buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.15 seconds)1460buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1461buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1462buildbot # Dload Upload Total Spent Left Speed1463buildbot # 0 0 0 0 0 0 0 0 0[ 47.926880] twistd[825]: 2026-10-18T06:55:00+0000 [buildbot_nix.nix_eval#info] Triggering reconfig due to schedule changes in test-flake1464buildbot # [ 47.954422] twistd[825]: 2026-10-18T06:55:00+0000 [-] beginning configuration update1465buildbot # [ 47.955799] twistd[825]: 2026-10-18T06:55:00+0000 [-] Loading configuration from '/nix/store/lkfkk9wk4n6j6iafap6c6lgmx76rs7hz-master.cfg'1466buildbot # 100 3793 100 3793 0 0 35013 0 0100 3793 100 3793 0 0 33635 0 0100 3793 100 3793 0 0 32301 0 01467buildbot # [ 48.042816] twistd[825]: 2026-10-18T06:55:00+0000 [-] gitpoller: using workdir '/var/lib/buildbot/master/gitpoller-work'1468buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.18 seconds)1469buildbot # [ 48.067997] twistd[825]: 2026-10-18T06:55:00+0000 [-] adding 1 new schedulers, removing 01470buildbot # [ 48.193463] twistd[825]: 2026-10-18T06:55:00+0000 [-] configuration update complete (took 0.260 seconds)1471buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1472buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1473buildbot # Dload Upload Total Spent Left Speed1474buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 38838 0 0100 4079 100 4079 0 0 37876 0 0100 4079 100 4079 0 0 37030 0 01475buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.16 seconds)1476buildbot: must succeed: curl --fail http://localhost:8010/api/v2/schedulers1477buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1478buildbot # Dload Upload Total Spent Left Speed1479buildbot # 0 0 0 0 0 0 0 0 0100 4079 100 4079 0 0 45304 0 0100 4079 100 4079 0 0 43950 0 0100 4079 100 4079 0 0 42807 0 01480buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/schedulers, in 0.13 seconds)1481(finished: subtest: Nightly schedulers are created, in 6.02 seconds)1482subtest: Scheduled effect builder exists1483buildbot: must succeed: curl --fail http://localhost:8010/api/v2/builders1484buildbot # % Total % Received % Xferd Average Speed Time Time Time Current1485buildbot # Dload Upload Total Spent Left Speed1486buildbot # 0 0 0 0 0 0 0 0 0100 2371 100 2371 0 0 180.0k 0 0100 2371 100 2371 0 0 148.9k 0 0100 2371 100 2371 0 0 128.0k 0 01487buildbot: (finished: must succeed: curl --fail http://localhost:8010/api/v2/builders, in 0.05 seconds)1488(finished: subtest: Scheduled effect builder exists, in 0.05 seconds)1489(finished: run the VM test script, in 50.10 seconds)1490test script finished in 50.14s1491cleanup1492kill QemuMachine (pid 12)1493buildbot # qemu-system-aarch64: terminating on signal 15 from pid 6 (/nix/store/smwd56pl54f0pcjdspgh5vnf20c8xwsc-python3-3.13.13/bin/python3.13)1494(finished: cleanup, in 0.22 seconds)1495additionally exposed symbols:1496 buildbot,1497 vlan1,1498 start_all, test_script, machines, machines_qemu, machines_nspawn, vlans, driver, log, os, create_machine, subtest, run_tests, join_all, retry, serial_stdout_off, serial_stdout_on, polling_condition, BaseMachine, QemuMachine, NspawnMachine, t, debug, dump_machine_ssh